OpenWrt/LEDE Project

Welcome to the OpenWrt/LEDE Project bug reporting and issue tracking system

Problems to be reported here are for the OpenWrt/LEDE Project targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt/LEDE Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to lede-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeveritySummaryReported InStatus
28.04.20203057Base systemBug ReportHighHighramips/mt7621/edimax_ra21s boot failure with kernel 5.4TrunkUnconfirmed Task Description

Boot fails on snapshot images with kernel 5.4
- Device: ramips/mt7621/edimax_ra21s
- Software: Any snapshot image with kernel 5.4

Partial serial console log with an official snapshot image. The boot process hangs after printing the kernel version line:

....
3: System Boot system code via Flash.

## Booting image at bfc50000 ...

   Image Name:   MIPS OpenWrt Linux-5.4.35

   Image Type:   MIPS Linux Kernel Image (lzma compressed)

   Data Size:    2439444 Bytes =  2.3 MB

   Load Address: 80001000

   Entry Point:  80001000

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK

No initrd

## Transferring control to Linux (at address 80001000) ...

## Giving linux memsize in MB, 256


Starting kernel ...


[    0.000000] Linux version 5.4.35 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13089-3fdb08681b)) #0 SMP Sun Apr 26 22:25:12 2020

Partial serial console log after booting an image I compiled myself. An LZMA error is displayed and the device gets into a reboot loop:

....
3: System Boot system code via Flash.

## Booting image at bfc50000 ...

   Image Name:   MIPS OpenWrt Linux-5.4.35

   Image Type:   MIPS Linux Kernel Image (lzma compressed)

   Data Size:    2439479 Bytes =  2.3 MB

   Load Address: 80001000

   Entry Point:  80001000

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover

   

===================================================================

                MT7621   stage1 code Mar 12 2015 14:43:30 (ASIC)

                CPU=50000000 HZ BUS=12500000 HZ

==================================================================
....

With the patch below, the device boots correctly:

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index d5527cd98d..43eb04e53f 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -249,6 +249,7 @@ endef
 TARGET_DEVICES += d-team_pbr-m1
 
 define Device/edimax_ra21s
+  $(Device/uimage-lzma-loader)
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := Edimax
   DEVICE_MODEL := RA21S
@@ -262,6 +263,7 @@ endef
 TARGET_DEVICES += edimax_ra21s
 
 define Device/edimax_rg21s
+  $(Device/uimage-lzma-loader)
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := Edimax
   DEVICE_MODEL := Gemini AC2600 RG21S

Note that the patch should also work on the edimax_rg21s, which has identical hardware. I’ve not tested on that device. The bootloader searches for the default tftp image uImage_ELECOM-WRC-2533GHBK-I, so it’s likely that more devices exist that are based on the same ELECOM WRC-2533GHBK-I hardware:

2: System Load Linux Kernel then write to Flash via TFTP.

 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)

 Please Input new ones /or Ctrl-C to discard

        Input device IP (192.168.99.9) ==:192.168.99.9

        Input server IP (192.168.99.8) ==:192.168.99.8

        Input Linux Kernel filename (uImage_ELECOM-WRC-2533GHBK-I) ==:uImage_ELECOM-WRC-2533GHBK-I
18.06.20192328Base systemBug ReportHighMediumAllocate resources to sort out odhcpd/dnsmasq interacti...TrunkNew Task Description

As IPv6 is being adopted, increasingly people are seeing dnsmasq log ‘spam’. See https://bugs.openwrt.org/index.php?do=details&task_id=1492&string=1492&search_name=&type%5B0%5D=&sev%5B0%5D=&pri%5B0%5D=&due%5B0%5D=&reported%5B0%5D=&cat%5B0%5D=&status%5B0%5D=open&percent%5B0%5D=&opened=&dev=&closed=&duedatefrom=&duedateto=&changedfrom=&changedto=&openedfrom=&openedto=&closedfrom=&closedto=

By default under openwrt, dhcpv4 leases are handled by dnsmasq whilst dhcpv6/RA is handled by openwrt’s odhcpd.

odhcpd could handle both v4 & v6 but does not yet have the same configuration flexibility for dhcp options as dnsmasq. I guess this is why no one has been brave enough to switch to odhcpd for ipv4 operations as well as ipv6.

dnsmasq can also handle dhcpv6/RA but not quite as flexibly as odhcpd. dnsmasq will automatically find IP6 prefixes on interfaces and start handling them, whilst openwrt’s strategy with odhcpd is to only handle stuff we tell you to handle, don’t do it automagically.

As dnsmasq is the default resolver for openwrt and the wider LAN, it needs to know about DHCP/hostname allocations. For DHCPv4 this is easy, dnsmasq is controlling them. For DHCPv6 a hosts file (called a statefile in the odhcpd code) is handed to dnsmasq.

By default this host file is not read dynamically, so odhcpd has to signal dnsmasq to re-read the host file (and clear caches etc etc) upon every ipv6 lease change.

This generates a lot of log spam and process startup overhead. There are also questions about service operability during this time.

Effort needs to be put into sorting this out.

Temporary workarounds:

Use ‘hostsdir’ dnsmasq option instead of ‘addn-hosts’ - dnsmasq will dynamically scan changes/additions to hosts in hostsdir whereas addn-hosts needs a SIGHUP. Host deletions cannot be handled by this method, so odhcpd would still need to SIGHUP on lease expiry. It might reduce some of the spam.

Longer term:

Teach dnsmasq to accept hostname updates over an IPC mechanism. ubus? and carry on using odhcpd for ipv6.

Teach dnsmasq to handle ipv6 prefix additions/deletions/handling via an IPC mechanism in the same way as odhcpd. Drop odhcpd and use dnsmasq for everything.

Use odhcpd for everything and use another dns resolver that interfaces nicely with odhcpd.

Why don’t I see this problem: I use dnsmasq to handle ipv6 but I’m lucky enough that this works for me.

This needs fixing/funding to sort it out though.

13.06.20203177Base systemBug ReportMediumLowprocd fails to start rpcd on 18.06.8 because of a libub...openwrt-18.06Requires testing Task Description

I’ve been trying to debug this regression in 18.06.8: in some circumstances, rpcd fails to start.

This is mostly visible as it breaks LuCI, see e.g. https://github.com/openwrt/luci/issues/3773 or https://forum.openwrt.org/t/luci-error-after-upgrade-to-r10949-or-r10951-etc-config-luci-seems-to-be-corrupt/56880

To reproduce on 18.06.8:

  • remove the rpcd section in /etc/config/rpcd
  • reboot (this is important)
  • result: rpcd is not started, and the following log message is printed in logread:
Thu Feb 27 21:26:37 2020 daemon.info procd: Not starting instance rpcd::instance1, command not set

More details:

When this issue happens, it becomes impossible to start rpcd with procd, even when adding back the rpcd section:

root@OpenWrt:~# PROCD_DEBUG=1 /etc/init.d/rpcd start
{ "name": "rpcd", "script": "\/etc\/init.d\/rpcd", "instances": { "instance1": { "command": [ "\/sbin\/rpcd" ] } }, "triggers": [ ], "data": { } }
root@OpenWrt:~# ps | grep rpc
 1614 root      1200 S    grep rpc

root@OpenWrt:~# uci add rpcd rpcd
cfg027c4e
root@OpenWrt:~# uci set rpcd.@rpcd[-1].timeout=30
root@OpenWrt:~# uci commit
root@OpenWrt:~# PROCD_DEBUG=1 /etc/init.d/rpcd start
{ "name": "rpcd", "script": "\/etc\/init.d\/rpcd", "instances": { "instance1": { "command": [ "\/sbin\/rpcd", "-t", "30" ] } }, "triggers": [ ], "data": { } }
root@OpenWrt:~# ps | grep rpc
 1636 root      1200 S    grep rpc

root@OpenWrt:~# uci set rpcd.@rpcd[-1].socket=/var/run/ubus.sock
root@OpenWrt:~# uci commit
root@OpenWrt:~# PROCD_DEBUG=1 /etc/init.d/rpcd start
{ "name": "rpcd", "script": "\/etc\/init.d\/rpcd", "instances": { "instance1": { "command": [ "\/sbin\/rpcd", "-s", "\/var\/run\/ubus.sock", "-t", "30" ] } }, "triggers": [ ], "data": { } }
root@OpenWrt:~# ps | grep rpc
 1680 root      1200 S    grep rpc

However, running rpcd manually works perfectly well (and fixes LuCI):

root@OpenWrt:~# rpcd

Workaround:

To workaround the issue, it is necessary to:

  • add a rpcd section with either a socket or timeout option
  • reboot

At this point, rpcd is started correctly, and everything works fine. It is even possible to delete the rpcd section and restart rpcd, it will still start correctly.

Finding the root cause:

There are very few commits between 18.06.7 and 18.06.8. None of these commits is touching procd or rpcd.

However, there has been a libubox fix in 82fbd857471292ca71dc06b05f11089962f33a4f. This is currently the prime suspect: I will try to revert this commit, and also try with the further libubox fixes that have not yet been backported.

08.05.20203070Base systemBug ReportMediumLowkmod-cryptodev: WARNING: possible circular locking depe...TrunkNew Task Description

OpenWrt master r13174-73fa1aba94 on octeon with kernel 5.4

[   70.971145] 
[   70.972662] ======================================================
[   70.978843] WARNING: possible circular locking dependency detected
[   70.985029] 5.4.39 #0 Not tainted
[   70.988348] ------------------------------------------------------
[   70.994531] unbound/2895 is trying to acquire lock:
[   70.999414] 800000041baeb868 (&pcr->fcrypt.sem){+.+.}, at: crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.009267] 
[   71.009267] but task is already holding lock:
[   71.015103] 800000041b911468 (&ses_new->sem){+.+.}, at: crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.024691] 
[   71.024691] which lock already depends on the new lock.
[   71.024691] 
[   71.032866] 
[   71.032866] the existing dependency chain (in reverse order) is:
[   71.040347] 
[   71.040347] -> #1 (&ses_new->sem){+.+.}:
[   71.045773]        lock_acquire+0xe0/0x220
[   71.049888]        __mutex_lock+0x94/0x628
[   71.054001]        crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.060365]        crypto_get_session_by_sid+0x1e4/0x12b8 [cryptodev]
[   71.066806]
[   71.066806] -> #0 (&pcr->fcrypt.sem){+.+.}:
[   71.072485]        check_noncircular+0x1a8/0x260
[   71.077110]        __lock_acquire+0x12f8/0x19f8
[   71.081648]        lock_acquire+0xe0/0x220
[   71.085754]        __mutex_lock+0x94/0x628
[   71.089862]        crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.096226]        crypto_get_session_by_sid+0x6cc/0x12b8 [cryptodev]
[   71.102666]
[   71.102666] other info that might help us debug this:
[   71.102666]
[   71.110668]  Possible unsafe locking scenario:
[   71.110668]
[   71.116588]        CPU0                    CPU1
[   71.121119]        ----                    ----
[   71.125650]   lock(&ses_new->sem);
[   71.129058]                                lock(&pcr->fcrypt.sem);
[   71.135242]                                lock(&ses_new->sem);
[   71.141165]   lock(&pcr->fcrypt.sem);
[   71.144834]
[   71.144834]  *** DEADLOCK ***
[   71.144834]
[   71.150756] 1 lock held by unbound/2895:
[   71.154681]  #0: 800000041b911468 (&ses_new->sem){+.+.}, at: crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.164700]
[   71.164700] stack backtrace:
[   71.169067] CPU: 1 PID: 2895 Comm: unbound Not tainted 5.4.39 #0
[   71.175075] Stack : ffffffff82790000 0000000000000000 0000000010108ce0 ed34220aed96997f
[   71.183091]         ed34220aed96997f 0000000000000000 800000041bb976f8 ffffffff837d0000
[   71.191106]         0000000000000000 0000000000000001 0000000000000000 ffffffff811ac4bc
[   71.199118]         6e626f756e64204e 0000000000000000 ffffffffffffffff 0000000000000010
[   71.207132]         0000000000000000 ffffffff81b40000 fffe000000000000 ffffffff81bc0000
[   71.215145]         0000000000000000 0000000000000000 ffffffff81b40000 0000000000000000
[   71.223158]         800000041f2e6200 0000000000000000 ffffffff81597628 1e00000010734ac7
[   71.231173]         0000000000000001 800000041bb94000 800000041bb976f0 47500c0a872e7996
[   71.239186]         ffffffff81865d8c 0000000000000000 800000041bb97828 ed34220aed96997f
[   71.247198]         ffffffff81b40bf7 ffffffff81865c54 ffffffff8111d4c8 ffffffff81a42a50
[   71.255213]         ...
[   71.257668] Call Trace:
[   71.260136] [<ffffffff8111d4c8>] show_stack+0x40/0x128
[   71.265288] [<ffffffff81865d8c>] dump_stack+0xe4/0x150
[   71.270444] [<ffffffff8119fb58>] check_noncircular+0x1a8/0x260
[   71.276289] [<ffffffff811a2d38>] __lock_acquire+0x12f8/0x19f8
[   71.282046] [<ffffffff811a3d80>] lock_acquire+0xe0/0x220
[   71.287374] [<ffffffff8188532c>] __mutex_lock+0x94/0x628
[   71.292706] [<ffffffffc02a7638>] crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.300290] [<ffffffffc02a7cc4>] crypto_get_session_by_sid+0x6cc/0x12b8 [cryptodev]
21.12.20192690Base systemBug ReportMediumMediumImagebuilder: "opkg_install_pkg: Package size mismatch"...AllNew Task Description

The Imagebuilder fails in the following situation:

  • download and unpack the imagebuilder
  • build an image: it works
  • wait a few days/weeks
  • try to build an image again with the same imagebuilder: it fails

It fails quite late during building with lots of errors like this:

   opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   opkg_install_cmd: Cannot install package luci.
   opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   opkg_install_cmd: Cannot install package base-files.
   opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   opkg_install_cmd: Cannot install package busybox.

This happens with stable releases (18.06.5), RC releases (19.07.0-rc2), and with several targets.

It looks like package sizes are somehow kept in a local cache during the first build, and are not updated when building again a few days later. This is strange because the imagebuilder seems to fetch new versions of the Packages.gz files.

Below is the full log.

  $ make image PROFILE=rb-nor-flash-16M"" BIN_DIR="${IMAGEBUILDER_DIR}" EXTRA_IMAGE_NAME="rzn" FILES="files/" PACKAGES="luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr -ppp -ppp-mod-pppoe -kmod-ppp -kmod-pppoe -kmod-pppox"
  
  Building images for ar71xx - MikroTik RouterBoard (16 MB SPI NOR)
  Packages: luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr base-files busybox dnsmasq dropbear firewall fstools ip6tables iptables kernel kmod-ath9k kmod-gpio-button-hotplug kmod-ledtrig-gpio libc libgcc logd mtd netifd odhcp6c odhcpd-ipv6only opkg rbcfg rssileds swconfig uboot-envtools uci uclient-fetch wpad-mini
  
  Downloading http://downloads.openwrt.org/releases/18.06.5/targets/ar71xx/mikrotik/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_core
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/base/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_base
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_luci
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_packages
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/routing/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_routing
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/telephony/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_telephony
  Downloading file:packages/Packages
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/imagebuilder
  
  Installing packages...
  Installing libc (1.1.19-2) to root...
  Installing libgcc (7.3.0-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libgcc_7.3.0-2_mips_24kc.ipk.
  Configuring libgcc.
  Configuring libc.
  Installing kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) to root...
  Configuring kernel.
  Installing luci (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci_git-19.353.67991-868abc1-1_all.ipk
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libubox_2018-07-25-c83a84af-2_mips_24kc.ipk.
  Installing luci-mod-admin-full (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-mod-admin-full_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-en (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-en_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-base (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-base_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-i18n-firewall-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-firewall-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-app-firewall (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-app-firewall_git-19.353.67991-868abc1-1_all.ipk
  Installing base-files (194.2-r7897-9d401013fc) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/base-files_194.2-r7897-9d401013fc_mips_24kc.ipk.
  Installing libuci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libuci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing busybox (1.28.4-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/busybox_1.28.4-3_mips_24kc.ipk.
  Installing dnsmasq (2.80-1.4) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dnsmasq_2.80-1.4_mips_24kc.ipk.
  Installing dropbear (2017.75-7.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dropbear_2017.75-7.1_mips_24kc.ipk.
  Installing firewall (2018-08-13-1c4d5bcd-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/firewall_2018-08-13-1c4d5bcd-1_mips_24kc.ipk.
  Installing fstools (2019-03-28-ff1ded63-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/fstools_2019-03-28-ff1ded63-5_mips_24kc.ipk.
  Installing ip6tables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/ip6tables_1.6.2-3_mips_24kc.ipk.
  Installing kmod-nf-reject6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-reject6_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt6_4.9.198-1_mips_24kc.ipk
  Installing kmod-ipt-core (4.9.198-1) to root...
  Downloading file:packages/kmod-ipt-core_4.9.198-1_mips_24kc.ipk
  Installing kmod-ip6tables (4.9.198-1) to root...
  Downloading file:packages/kmod-ip6tables_4.9.198-1_mips_24kc.ipk
  Installing libip4tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip4tc_1.6.2-3_mips_24kc.ipk.
  Installing libip6tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip6tc_1.6.2-3_mips_24kc.ipk.
  Installing libxtables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libxtables_1.6.2-3_mips_24kc.ipk.
  Installing iptables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/iptables_1.6.2-3_mips_24kc.ipk.
  Package iptables (1.6.2-3) installed in root is up to date.
  Package kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) installed in root is up to date.
  Installing kmod-ath9k (4.9.198+2017-11-01-10) to root...
  Downloading file:packages/kmod-ath9k_4.9.198%2b2017-11-01-10_mips_24kc.ipk
  Installing libnl-tiny (0.1-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libnl-tiny_0.1-5_mips_24kc.ipk.
  Installing kmod-gpio-button-hotplug (4.9.198-2) to root...
  Downloading file:packages/kmod-gpio-button-hotplug_4.9.198-2_mips_24kc.ipk
  Installing kmod-ledtrig-gpio (4.9.198-1) to root...
  Downloading file:packages/kmod-ledtrig-gpio_4.9.198-1_mips_24kc.ipk
  Package libc (1.1.19-2) installed in root is up to date.
  Package libgcc (7.3.0-2) installed in root is up to date.
  Installing logd (2018-02-14-128bc35f-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/logd_2018-02-14-128bc35f-2_mips_24kc.ipk.
  Installing mtd (23) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/mtd_23_mips_24kc.ipk.
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Installing netifd (2019-01-31-a2aba5c7-2.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/netifd_2019-01-31-a2aba5c7-2.1_mips_24kc.ipk.
  Installing odhcp6c (2018-07-14-67ae6a71-15) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcp6c_2018-07-14-67ae6a71-15_mips_24kc.ipk.
  Installing odhcpd-ipv6only (1.15-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcpd-ipv6only_1.15-3_mips_24kc.ipk.
  Installing opkg (2019-06-14-dcbc142e-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/opkg_2019-06-14-dcbc142e-1_mips_24kc.ipk.
  Installing rbcfg (2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rbcfg_2_mips_24kc.ipk.
  Installing rssileds (0.2-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rssileds_0.2-1_mips_24kc.ipk.
  Installing swconfig (11) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/swconfig_11_mips_24kc.ipk.
  Installing uboot-envtools (2018.03-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uboot-envtools_2018.03-1_mips_24kc.ipk.
  Installing uci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing uclient-fetch (2018-11-24-3ba74ebc-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uclient-fetch_2018-11-24-3ba74ebc-1_mips_24kc.ipk.
  Installing wpad-mini (2018-05-21-62566bc2-8) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/wpad-mini_2018-05-21-62566bc2-8_mips_24kc.ipk.
  Configuring kmod-nf-reject6.
  Configuring uboot-envtools.
  Configuring kmod-ledtrig-gpio.
  Configuring rbcfg.
  Configuring luci-app-firewall.
  Configuring kmod-nf-ipt.
  Configuring libxtables.
  Configuring libip4tc.
  Configuring kmod-nf-ipt6.
  Configuring kmod-ipt-core.
  Configuring kmod-ip6tables.
  Configuring fstools.
  Configuring libip6tc.
  Configuring luci-base.
  Configuring luci-mod-admin-full.
  Configuring kmod-gpio-button-hotplug.
  Configuring luci-i18n-firewall-fr.
  Configuring iptables.
  Configuring ip6tables.
  Configuring luci-i18n-base-en.
  Configuring luci-i18n-base-fr.
  Collected errors:
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package luci.
   * opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   * opkg_install_cmd: Cannot install package base-files.
   * opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   * opkg_install_cmd: Cannot install package busybox.
   * opkg_install_pkg: Package size mismatch: dnsmasq is 99783 bytes, expecting 99775 bytes
   * opkg_install_cmd: Cannot install package dnsmasq.
   * opkg_install_pkg: Package size mismatch: dropbear is 86613 bytes, expecting 86610 bytes
   * opkg_install_cmd: Cannot install package dropbear.
   * opkg_install_pkg: Package size mismatch: firewall is 40776 bytes, expecting 40777 bytes
   * opkg_install_cmd: Cannot install package firewall.
   * opkg_install_pkg: Package size mismatch: libnl-tiny is 12953 bytes, expecting 12948 bytes
   * opkg_install_cmd: Cannot install package kmod-ath9k.
   * opkg_install_pkg: Package size mismatch: logd is 10114 bytes, expecting 10111 bytes
   * opkg_install_cmd: Cannot install package logd.
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package mtd.
   * opkg_install_pkg: Package size mismatch: netifd is 62005 bytes, expecting 62004 bytes
   * opkg_install_cmd: Cannot install package netifd.
   * opkg_install_pkg: Package size mismatch: odhcp6c is 23650 bytes, expecting 23646 bytes
   * opkg_install_cmd: Cannot install package odhcp6c.
   * opkg_install_pkg: Package size mismatch: odhcpd-ipv6only is 28830 bytes, expecting 28845 bytes
   * opkg_install_cmd: Cannot install package odhcpd-ipv6only.
   * opkg_install_pkg: Package size mismatch: opkg is 58890 bytes, expecting 58895 bytes
   * opkg_install_cmd: Cannot install package opkg.
   * opkg_install_pkg: Package size mismatch: rssileds is 4056 bytes, expecting 4059 bytes
   * opkg_install_cmd: Cannot install package rssileds.
   * opkg_install_pkg: Package size mismatch: swconfig is 9478 bytes, expecting 9484 bytes
   * opkg_install_cmd: Cannot install package swconfig.
   * opkg_install_pkg: Package size mismatch: uci is 7267 bytes, expecting 7262 bytes
   * opkg_install_cmd: Cannot install package uci.
   * opkg_install_pkg: Package size mismatch: uclient-fetch is 7489 bytes, expecting 7485 bytes
   * opkg_install_cmd: Cannot install package uclient-fetch.
   * opkg_install_pkg: Package size mismatch: wpad-mini is 258733 bytes, expecting 258725 bytes
   * opkg_install_cmd: Cannot install package wpad-mini.
  make[2]: *** [Makefile:153: package_install] Error 255
  make[1]: *** [Makefile:114: _call_image] Error 2
  make: *** [Makefile:193: image] Error 2
09.10.20192541KernelBug ReportMediumLowHardware offloading causes some flows to fail to be NAT...openwrt-19.07New Task Description

Just after a reboot, some flows are not NATed: packets from a machine in the LAN are sent to the WAN port with a private source IP address.

This is on a Linksys RE6500 (ramips mt7621) running openwrt 19.07-SNAPSHOT r10578-b3d70f628.
It is configured with flow_offloading and flow_offloading_hw.

Here is a tcpdump capture showing the problem on the WAN port (172.23.184.0/24 is my LAN address space):

root@openwrt:~# tcpdump -n -i eth0.20 net 172.23.184.0/24
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0.20, link-type EN10MB (Ethernet), capture size 262144 bytes
18:51:21.756552 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 112
18:51:22.651556 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148
18:51:26.681032 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 768
18:51:27.771654 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148

Here is what conntrack -L says:

udp      17 55 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=93 bytes=20412 [UNREPLIED] src=91.224.XX.YY dst=172.23.184.119 sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Notice the second dst= that shows the private IP address of the LAN machine.

After restarting the firewall, the flow is correctly NAT-ed and conntrack -L shows the correct entry (193.33.ZZ.WW is my public IP address):

udp      17 175 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=4 bytes=704 [UNREPLIED] src=91.224.XX.YY dst=193.33.ZZ.WW sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Note: when I only enable flow_offloading, the issue does not appear anymore, so this really seems to be an issue with the hw offloading integration in the firewall.

14.05.20192283Base systemBug ReportMediumLowm76: crash when creating an additional monitor interfac...TrunkAssigned Task Description

OpenWrt: b65a270c851ee422f26a0af10c879ebb87cb8f76
mt76: 4.14.108+2019-03-27-a11b6734-1

While debugging an unicast wifi bug, I tried to create a mon0 interface
iw wlan0 interface add mon0 type monitor.

Modules:	mt7603e@830f0000+87a0	mt76@83128000+6060	mac80211@83080000+6a240	iptable_raw@83111000+2e0	iptable_nat@831c5000+340	iptable_mangle@83bd7000+400	iptable_filter@83135000+360	ipt_REJECT@831c3000+3a0	ipt_MASQUERADE@8311f000+280	ipt_ECN@83bca000+560	ip_tables@831c0000+2650	cfg80211@83000000+35fb0	xt_time@83bbd000+6c0	xt_tcpudp@83baa000+6e0	xt_tcpmss@831ac000+400	xt_statistic@8311d000+320	xt_state@83151000+2a0xt_recent@831ae000+1bf0	xt_nat@83bd0000+5e0	xt_multiport@83bd6000+4e0	xt_mark@83134000+280	xt_mac@83bd3000+240	xt_limit@8315f000+480	xt_length@83125000+2a0	xt_hl@83132000+300	xt_helper@83126000+340	xt_ecn@83127000+520	xt_dscp@8313c000+3c0	xt_conntrack@83ba8000+8e0	xt_connmark@8311c000+420	xt_connlimit@83136000+1110	xt_connbytes@83bcd000+620	xt_comment@83117000+1c0	xt_TCPMSS@83bd2000+800	xt_REDIRECT@83bce000+2a0	xt_LOG@83bcc000+280	xt_HL@83bc9000+520	xt_FLOWOFFLOAD@83bc7000+ab0	xt_DSCP@8313b000+5c0	xt_CT@8313d000+9e0	xt_CLASSIFY@83131000+220	x_tables@83bc0000+30f0	nf_reject_ipv4@83130000+780	nf_nat_redirect@8311e000+560	nf_nat_masquerade_ipv4@83bac000+590	nf_conntrack_ipv4@83bb8000+1100	nf_nat_ipv4@83bba000+c70	nf_nat@83120000+2250	nf_log_ipv4@83bad000+dc0	nf_log_common@83116000+980	nf_flow_table_hw@83bbe000+820	nf_flow_table@83ba4000+3310	nf_defrag_ipv4@83153000+3e0	nf_conntrack_rtcache@83112000+8a0	compat@83118000+1700	act_connmark@83113000+850	nf_conntrack@83100000+d2c0	sch_tbf@8314e000+1680	sch_ingress@8314a000+4a0	sch_htb@83ba0000+36d0	sch_hfsc@83158000+39e0	em_u32@831ba000+200	cls_u32@83154000+2330	cls_tcindex@8314c000+15c0	cls_route@831be000+1540	cls_matchall@831a3000+a20	cls_fw@83144000+1000	cls_flow@83148000+1780	cls_basic@831bb000+d00	act_skbedit@831b4000+9f0	act_mirred@831b5000+e50	ifb@831a0000+be0	l2tp_ip@8316e000+1410	l2tp_eth@831a4000+a00	l2tp_netlink@831a6000+1f90	l2tp_core@831a8000+3110	udp_tunnel@83b99000+920	leds_gpio@83b4f000+b20	gpio_button_hotplug@83b50000+1900
<6>[    0.191477] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.197077] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.203431] NET: Registered protocol family 1
<7>[    0.207612] PCI: CLS 0 bytes, default 32
<4>[    0.210849] Crashlog allocated RAM at address 0x3f00000
<6>[    0.217463] workingset: timestamp_bits=30 max_order=14 bucket_order=0
<6>[    0.229138] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.234765] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<6>[    0.254072] io scheduler noop registered
<6>[    0.257804] io scheduler deadline registered (default)
<6>[    0.263580] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
<6>[    0.270756] console [ttyS0] disabled
<6>[    0.274257] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
<6>[    0.282984] console [ttyS0] enabled
<6>[    0.289970] bootconsole [early0] disabled
<3>[    0.298544] cacheinfo: Failed to find cpu0 device node
<4>[    0.303799] cacheinfo: Unable to detect cache hierarchy for CPU 0
<6>[    0.310628] spi-mt7621 10000b00.spi: sys_freq: 193333333
<6>[    0.329261] m25p80 spi0.0: s25fl064k (8192 Kbytes)
<5>[    0.334207] 4 fixed-partitions partitions found on MTD device spi0.0
<5>[    0.340643] Creating 4 MTD partitions on "spi0.0":
<5>[    0.345526] 0x000000000000-0x000000020000 : "boot"
<5>[    0.351255] 0x000000020000-0x0000007c0000 : "firmware"
<5>[    0.359405] 2 tplink-fw partitions found on MTD device firmware
<5>[    0.365482] Creating 2 MTD partitions on "firmware":
<5>[    0.370527] 0x000000000000-0x00000014f3a3 : "kernel"
<5>[    0.376451] 0x00000014f3a4-0x0000007a0000 : "rootfs"
<5>[    0.382277] mtd: device 3 (rootfs) set to be root filesystem
<5>[    0.389534] 1 squashfs-split partitions found on MTD device rootfs
<5>[    0.395888] 0x000000390000-0x0000007a0000 : "rootfs_data"
<5>[    0.402220] 0x0000007c0000-0x0000007d0000 : "config"
<5>[    0.408051] 0x0000007d0000-0x000000800000 : "factory"
<6>[    0.414688] libphy: Fixed MDIO Bus: probed
<6>[    0.431000] rt3050-esw 10110000.esw: link changed 0x00
<6>[    0.437801] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
<6>[    0.447188] NET: Registered protocol family 17
<6>[    0.451831] 8021q: 802.1Q VLAN Support v1.8
<6>[    0.468953] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
<6>[    0.476929] Freeing unused kernel memory: 136K
<4>[    0.481474] This architecture does not have kernel memory protection.
<14>[    1.719920] init: Console is alive
<14>[    1.723707] init: - watchdog -
<5>[    2.267376] random: fast init done
<14>[    3.000227] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<14>[    3.073195] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[    3.091032] init: - preinit -
<6>[    4.256850] rt3050-esw 10110000.esw: link changed 0x00
<5>[    4.687762] random: procd: uninitialized urandom read (4 bytes read)
<13>[    4.780523] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
<12>[    4.822673] urandom-seed: Seed file not found (/etc/urandom.seed)
<14>[    4.918017] procd: - early -
<14>[    4.921055] procd: - watchdog -
<14>[    5.550307] procd: - watchdog -
<14>[    5.553880] procd: - ubus -
<5>[    5.600493] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[    5.667639] random: ubusd: uninitialized urandom read (4 bytes read)
<14>[    5.675598] procd: - init -
<14>[    6.002174] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[    6.011883] l2tp_core: L2TP core driver, V2.0
<6>[    6.017941] l2tp_netlink: L2TP netlink interface
<6>[    6.024375] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
<6>[    6.032295] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
<6>[    6.044769] Mirror/redirect action on
<6>[    6.141161] u32 classifier
<6>[    6.143986]     input device check on
<6>[    6.147693]     Actions configured
<6>[    6.239795] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
<6>[    6.260517] Loading modules backported from Linux version v4.19.23-0-g67d52fae61c1
<6>[    6.268272] Backport generated by backports.git v4.19.23-1-0-g480a925a
<6>[    6.488990] xt_time: kernel timezone is -0000
<6>[    6.514755] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    6.566528] mt76_wmac 10300000.wmac: ASIC revision: 76280001
<6>[    7.593554] mt76_wmac 10300000.wmac: Firmware Version: 20151201
<6>[    7.599575] mt76_wmac 10300000.wmac: Build Time: 20151201183641
<6>[    7.621350] mt76_wmac 10300000.wmac: firmware init done
<6>[    7.728549] rt3050-esw 10110000.esw: link changed 0x01
<7>[    7.792147] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<14>[    7.802137] kmodloader: done loading kernel modules from /etc/modules.d/*
<4>[    9.177342] urandom_read: 6 callbacks suppressed
<5>[    9.177353] random: jshn: uninitialized urandom read (4 bytes read)
<6>[   11.971477] rt3050-esw 10110000.esw: link changed 0x00
<6>[   15.521829] rt3050-esw 10110000.esw: link changed 0x01
<6>[   40.298153] rt3050-esw 10110000.esw: link changed 0x00
<6>[   43.783225] rt3050-esw 10110000.esw: link changed 0x01
<6>[   44.432507] device eth0 entered promiscuous mode
<6>[   50.910274] br-lan: port 1(eth0.1) entered blocking state
<6>[   50.915855] br-lan: port 1(eth0.1) entered disabled state
<6>[   50.921660] device eth0.1 entered promiscuous mode
<6>[   50.939619] br-lan: port 1(eth0.1) entered blocking state
<6>[   50.945176] br-lan: port 1(eth0.1) entered forwarding state
<6>[   51.073380] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.080911] device eth0.1 left promiscuous mode
<6>[   51.085686] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.170750] br-lan: port 1(eth0.1) entered blocking state
<6>[   51.176313] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.182108] device eth0.1 entered promiscuous mode
<6>[   51.234695] br-lan: port 1(eth0.1) entered blocking state
<6>[   51.240185] br-lan: port 1(eth0.1) entered forwarding state
<6>[   54.284409] br-lan: port 2(wlan0) entered blocking state
<6>[   54.290155] br-lan: port 2(wlan0) entered disabled state
<6>[   54.295937] device wlan0 entered promiscuous mode
<6>[   55.227079] br-lan: port 2(wlan0) entered blocking state
<6>[   55.232548] br-lan: port 2(wlan0) entered forwarding state
<6>[   65.499313] device wlan0 left promiscuous mode
<6>[   65.504001] br-lan: port 2(wlan0) entered disabled state
<6>[   67.659749] br-lan: port 2(wlan0) entered blocking state
<6>[   67.665252] br-lan: port 2(wlan0) entered disabled state
<6>[   67.670929] device wlan0 entered promiscuous mode
<6>[   67.675848] br-lan: port 2(wlan0) entered blocking state
<6>[   67.681236] br-lan: port 2(wlan0) entered forwarding state
<6>[   67.687263] br-lan: port 2(wlan0) entered disabled state
<6>[   70.171904] br-lan: port 2(wlan0) entered blocking state
<6>[   70.177326] br-lan: port 2(wlan0) entered forwarding state
<4>[   74.063128] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
<4>[   74.076565] jffs2_build_filesystem(): unlocking the mtd device... 
<4>[   74.076626] done.
<4>[   74.084920] jffs2_build_filesystem(): erasing all blocks after the end marker... 
<5>[   75.341427] random: crng init done
<4>[   89.806667] done.
<5>[   89.808667] jffs2: notice: (2808) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
<4>[   90.097054] overlayfs: upper fs does not support tmpfile.
<6>[95491.758861] device wlan0 left promiscuous mode
<6>[95491.763556] br-lan: port 2(wlan0) entered disabled state
<6>[95496.123525] br-lan: port 2(wlan0) entered blocking state
<6>[95496.128998] br-lan: port 2(wlan0) entered disabled state
<6>[95496.134779] device wlan0 entered promiscuous mode
<6>[95496.139678] br-lan: port 2(wlan0) entered blocking state
<6>[95496.145064] br-lan: port 2(wlan0) entered forwarding state
<6>[95496.151480] br-lan: port 2(wlan0) entered disabled state
<6>[95497.434477] br-lan: port 2(wlan0) entered blocking state
<6>[95497.439926] br-lan: port 2(wlan0) entered forwarding state
<6>[181891.461089] device wlan0 left promiscuous mode
<6>[181891.465866] br-lan: port 2(wlan0) entered disabled state
<6>[181895.862824] br-lan: port 2(wlan0) entered blocking state
<6>[181895.868387] br-lan: port 2(wlan0) entered disabled state
<6>[181895.874262] device wlan0 entered promiscuous mode
<6>[181897.223872] br-lan: port 2(wlan0) entered blocking state
<6>[181897.229417] br-lan: port 2(wlan0) entered forwarding state
<6>[268291.119138] device wlan0 left promiscuous mode
<6>[268291.123910] br-lan: port 2(wlan0) entered disabled state
<6>[268296.605568] br-lan: port 2(wlan0) entered blocking state
<6>[268296.611162] br-lan: port 2(wlan0) entered disabled state
<6>[268296.616932] device wlan0 entered promiscuous mode
<6>[268298.034899] br-lan: port 2(wlan0) entered blocking state
<6>[268298.040440] br-lan: port 2(wlan0) entered forwarding state
<6>[354690.783285] device wlan0 left promiscuous mode
<6>[354690.788153] br-lan: port 2(wlan0) entered disabled state
<6>[354695.110340] br-lan: port 2(wlan0) entered blocking state
<6>[354695.115924] br-lan: port 2(wlan0) entered disabled state
<6>[354695.121790] device wlan0 entered promiscuous mode
<6>[354696.496658] br-lan: port 2(wlan0) entered blocking state
<6>[354696.502208] br-lan: port 2(wlan0) entered forwarding state
<6>[441090.473174] device wlan0 left promiscuous mode
<6>[441090.478041] br-lan: port 2(wlan0) entered disabled state
<6>[441094.831626] br-lan: port 2(wlan0) entered blocking state
<6>[441094.837188] br-lan: port 2(wlan0) entered disabled state
<6>[441094.843056] device wlan0 entered promiscuous mode
<6>[441094.848063] br-lan: port 2(wlan0) entered blocking state
<6>[441094.853538] br-lan: port 2(wlan0) entered forwarding state
<6>[441094.860044] br-lan: port 2(wlan0) entered disabled state
<6>[441096.143580] br-lan: port 2(wlan0) entered blocking state
<6>[441096.149126] br-lan: port 2(wlan0) entered forwarding state
<6>[527490.172730] device wlan0 left promiscuous mode
<6>[527490.177478] br-lan: port 2(wlan0) entered disabled state
<6>[527494.541946] br-lan: port 2(wlan0) entered blocking state
<6>[527494.547517] br-lan: port 2(wlan0) entered disabled state
<6>[527494.553391] device wlan0 entered promiscuous mode
<6>[527495.938895] br-lan: port 2(wlan0) entered blocking state
<6>[527495.944394] br-lan: port 2(wlan0) entered forwarding state
<1>[592589.839671] CPU 0 Unable to handle kernel paging request at virtual address 000002c8, epc == 830af554, ra == 83082384
<4>[592589.850591] Oops[#1]:
<4>[592589.852986] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.108 #0
<4>[592589.859074] task: 803cb430 task.stack: 803c6000
<4>[592589.863748] $ 0   : 00000000 80410000 00000000 00000000
<4>[592589.869140] $ 4   : 00000000 838cbd80 00000000 00000000
<4>[592589.874531] $ 8   : 838cb1c8 82f18516 00000010 43420000
<4>[592589.879922] $12   : 087f0000 00000000 000a9a0e 00000004
<4>[592589.885312] $16   : 838cbd80 00000000 830ecbc0 830ecbc0
<4>[592589.890703] $20   : 83b61bf0 830f73ac 00000001 00000000
<4>[592589.896093] $24   : 00000010 801bcbe0                  
<4>[592589.901484] $28   : 803c6000 83807e18 830ede88 83082384
<4>[592589.906876] Hi    : 005a1ac2
<4>[592589.909878] Lo    : ef14c145
<4>[592589.912889] epc   : 830af554 0x830af554 [mac80211@83080000+0x6a240]
<4>[592589.919330] ra    : 83082384 0x83082384 [mac80211@83080000+0x6a240]
<4>[592589.925764] Status: 1100e403	KERNEL EXL IE 
<4>[592589.930096] Cause : 00800008 (ExcCode 02)
<4>[592589.934243] BadVA : 000002c8
<4>[592589.937246] PrId  : 00019655 (MIPS 24KEc)
<4>[592589.941392] Modules linked in: mt7603e mt76 mac80211 iptable_raw iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY x_tables nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_log_common nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache compat act_connmark nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ifb
<4>[592590.013247]  l2tp_ip l2tp_eth l2tp_netlink l2tp_core udp_tunnel leds_gpio gpio_button_hotplug
<4>[592590.021995] Process swapper (pid: 0, threadinfo=803c6000, task=803cb430, tls=00000000)
<4>[592590.030101] Stack : 83807e7c 0000008a 00000000 838cbd80 838cbd80 83082384 00000050 830ecbc0
<4>[592590.038670]         83b61bf0 830f73ac 830ed4e0 00000000 838cb180 00000000 00000000 830ecbc0
<4>[592590.047239]         83b61bf0 830f73ac 830ed4e0 00000001 830ecbc0 830adb78 00000cfc 0000033f
<4>[592590.055808]         8381b800 00000080 00000000 00000000 00060036 00000000 830ed4e0 83b61bf0
<4>[592590.064376]         00000004 00000003 00000006 830f73f0 83807ee0 80058f30 803dfc40 00000003
<4>[592590.072945]         ...
<4>[592590.075510] Call Trace:
<4>[592590.075556] [<83082384>] 0x83082384 [mac80211@83080000+0x6a240]
<4>[592590.084214] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.090146] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.096068] [<830adb78>] 0x830adb78 [mac80211@83080000+0x6a240]
<4>[592590.102173] [<830f73f0>] 0x830f73f0 [mt7603e@830f0000+0x87a0]
<4>[592590.108088] [<80058f30>] 0x80058f30
<4>[592590.111724] [<830b4d80>] 0x830b4d80 [mac80211@83080000+0x6a240]
<4>[592590.117809] [<80009e70>] 0x80009e70
<4>[592590.121449] [<830f7548>] 0x830f7548 [mt7603e@830f0000+0x87a0]
<4>[592590.127377] [<8002d078>] 0x8002d078
<4>[592590.130998] [<80009e70>] 0x80009e70
<4>[592590.134619] [<80351a20>] 0x80351a20
<4>[592590.138240] [<8005d978>] 0x8005d978
<4>[592590.141866] [<80058f30>] 0x80058f30
<4>[592590.145491] [<80009e70>] 0x80009e70
<4>[592590.149109] 
<4>[592590.150701] Code: 27bdffe8  afbf0014  afb00010 <8c9002c8> 8caa00a4  1080001e  8e090438  8e030044  0123402a 
<4>[592590.160690] 
<4>[592590.162335] ---[ end trace 25bbd90279e222f9 ]---

===================================
10.03.20192176KernelBug ReportMediumHighubiquiti loco xw (AR9342 Rev.2) stops receiving on wire...AllNew Task Description

This bug has been existing as long as the ubiquiti loco xw 5 ghz hardware is around, probably what we are dealing with is a hardware bug in the AR9342 Rev. 2 chip. It is somehow hard to reproduce, but it hits us reliable every couple of hours, sometimes days, running any version of OpenWrt up to todays master branch. It just happened again and this time I decided to check if the bug is actually listed on FS – in addition to creating the usual cron-job executing `iw dev wlan0 scan` every minute. There is even a watchdog in the community libremesh repository designed to catch exactly this bug:
https://github.com/libremesh/lime-packages/blob/master/packages/cotonete/Makefile#L21

So to run into it, here we got 2 ubiquiti nanobeam m5 devices running OpenWrt ar71xx/generic loco-m-xw pointing at each other over a distance of roughly 2km. This link is acceptable, but not perfect and slightly asymmetric.

Device A (worse RX SNR):

Station f0:9f:c2:xx:xx:7a (on wlan0-mesh)
	inactive time:	0 ms
	rx bytes:	1433997029
	rx packets:	8589913
	tx bytes:	23160025785
	tx packets:	15667682
	tx retries:	677924
	tx failed:	0
	rx drop misc:	30076
	signal:  	-76 [-79, -79] dBm
	signal avg:	-74 [-77, -77] dBm
	Toffset:	4887897799 us
	tx bitrate:	43.3 MBit/s MCS 10 short GI
	rx bitrate:	43.3 MBit/s MCS 4 short GI
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18117 seconds

Device B (better RX SNR)

Station fc:ec:da:xx:xx:8c (on wlan0-mesh)
	inactive time:	20 ms
	rx bytes:	23442553203
	rx packets:	16047526
	tx bytes:	1274688573
	tx packets:	8251479
	tx retries:	1337700
	tx failed:	2932
	rx drop misc:	45195
	signal:  	-72 [-79, -73] dBm
	signal avg:	-71 [-78, -73] dBm
	Toffset:	18446744068821653812 us
	tx bitrate:	57.8 MBit/s MCS 11 short GI
	rx bitrate:	43.3 MBit/s MCS 10 short GI
	last ack signal:24 dBm
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18179 seconds

Now it so happens that device A (and always only device A!) becomes deaf after some hours of mostly sending lots of traffic to device B. It will continue to send beacons, but loose all associations. device B will keep trying setting up a link, but it keeps ending up in ‘BLOCKED’ state and dumps using a monitor mode interface show that device A simply doesn’t react at all to any of the frames send by device B. A simple `iw dev wlan0 scan` on device A (which doesn’t give any results) fixes the problem.

The channel seems rather unused otherwise and signal quality only varies by weather conditions. Interestingly this seems to happen on non-DFS channels only. And it happens on Ad-Hoc mode (unencrypted, never tried encrypted) and 802.11s (open ie. setup via `iw` tool as well as with SAE ie. running `wpa_supplicant`) equally. It doesn’t happen on all nodes, but only on those with rather bad signal or at least one far-off neighbor.

Maybe related to FS#1246

I saw this occuring on ubnt nanostation loco m5 XW as well as on all nanobeam m5 variants (which is supposedly compatible with the loco-m-xw image).

ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47

WiFi EEPROM of the devices:

*
00001000  02 02 F0 9F C2 XX XX XX  00 30 3a 31 35 3a 36 64  |.....XXX.0:15:6d|
00001010  3a 64 64 3a 64 65 3a 61  64 00 00 00 00 00 1f 00  |:dd:de:ad.......|
00001020  33 01 00 00 00 00 04 00  00 00 2d 04 03 00 08 ff  |3.........-.....|
00001030  20 01 00 00 00 20 02 00  00 cc cc 0c 00 50 01 50  | .... .......P.P|
00001040  01 50 01 00 00 00 00 00  00 21 00 a4 00 00 00 00  |.P.......!......|
00001050  ff 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001060  0e 0e 03 00 2c e2 00 02  0e 1c e0 e0 00 0c e0 e0  |....,...........|
00001070  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001080  00 00 00 00 00 00 00 00  00 00 70 89 ac 00 00 00  |..........p.....|
00001090  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000010c0  00 00 00 70 ac 70 89 ac  70 89 ac 70 89 ac 22 22  |...p.p..p..p..""|
000010d0  22 22 22 22 22 22 22 22  20 1c 22 22 20 1c 22 22  |"""""""" ."" .""|
000010e0  20 1c 24 24 20 18 16 14  20 16 14 12 20 20 1c 14  | .$$ ... ...  ..|
000010f0  24 24 20 18 16 14 20 16  14 12 20 20 1c 14 24 24  |$$ ... ...  ..$$|
00001100  20 18 16 14 20 16 14 12  20 20 1c 14 22 22 1e 16  | ... ...  ..""..|
00001110  14 12 1e 14 12 10 20 20  1c 14 22 22 1e 16 14 12  |......  ..""....|
00001120  1e 14 12 10 20 20 1c 14  22 22 1e 16 14 12 1e 14  |....  ..""......|
00001130  12 10 20 20 1c 14 11 12  15 17 41 42 45 47 31 32  |..  ......ABEG12|
00001140  35 37 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |57pu..pu..pu..pu|
00001150  ac b8 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |..pu..pu..pu..pu|
*
00001170  ac b8 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |..<|<|<|<|<|<|<||
00001180  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
000011a0  3c 7c 10 01 00 00 22 22  02 00 00 00 00 00 00 00  |<|....""........|
000011b0  00 00 00 00 00 00 44 00  00 00 00 00 00 ff 00 00  |......D.........|
000011c0  00 00 00 00 00 00 00 00  00 00 00 00 ff 0e 0e 03  |................|
000011d0  00 2d e2 00 02 0e 1c 00  00 00 00 00 00 00 00 00  |.-..............|
000011e0  00 00 00 00 00 00 00 00  00 44 44 00 00 00 00 00  |.........DD.....|
000011f0  00 00 00 00 00 00 00 4c  58 68 8c a4 b4 bd cd d9  |.......LXh......|
00001200  00 89 00 00 00 dc 00 89  00 00 00 e0 00 8a 00 00  |................|
00001210  00 e2 00 8b 00 00 00 de  00 8b 00 00 00 de 00 8b  |................|
00001220  00 00 00 dc 00 89 00 00  00 da 00 8b 00 00 00 e0  |................|
00001230  00 89 00 00 00 e4 00 8a  00 00 00 e7 00 8b 00 00  |................|
00001240  00 e6 00 8b 00 00 00 e2  00 8c 00 00 00 e1 00 8c  |................|
00001250  00 00 00 df 00 8b 00 00  00 dd 00 8b 00 00 00 00  |................|
00001260  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00001280  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 4c  |...............L|
00001290  54 68 78 8c a0 b4 c5 4c  54 68 78 8c a0 b4 c5 4c  |Thx....LThx....L|
000012a0  54 68 78 8c a0 b4 c5 26  20 1e 1c 26 20 1e 1c 26  |Thx....& ..& ..&|
000012b0  20 1e 1c 26 20 1e 1c 26  20 1e 1c 26 20 1e 1c 26  | ..& ..& ..& ..&|
000012c0  20 1e 1c 26 20 1e 1c 26  22 20 1e 1c 1a 20 1e 1c  | ..& ..&" ... ..|
000012d0  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
000012e0  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
000012f0  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001300  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001310  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001320  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
00001330  1e 1c 1a 00 00 00 00 26  22 20 1e 1c 1a 20 1e 1c  |.......&" ... ..|
00001340  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
00001350  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
00001360  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001370  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001380  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001390  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
000013a0  1e 1c 1a 00 00 00 00 10  16 18 40 46 48 30 36 38  |..........@FH068|
000013b0  4c 54 68 78 8c a0 b9 cd  4c 54 68 78 8c a0 b9 cd  |LThx....LThx....|
*
000013f0  4c 54 68 78 8c a0 b9 cd  3c 7c 3c 7c 3c 7c 3c 7c  |LThx....<|<|<|<||
00001400  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
00001440  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
18.11.20181958PackagesBug ReportMediumLowuqmi: unicode characters in SMS confuse uqmiTrunkNew Task Description

When using uqmi –get-message the message ends up truncated in case it contains unicode characters like german umlauts.

07.09.20181837Base systemBug ReportMediumMediumKernel oops when using wireguard and mangle/fwmarkopenwrt-18.06New Task Description

On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Ethernet interface being the head-unit connected to a VLAN switch.

Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664463] INFO: rcu_sched self-detected stall on CPU
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664907] 	1-...: (5999 ticks this GP) idle=9ee/140000000000001/0 softirq=961867/961867 fqs=2711
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.665571] 	 (t=6000 jiffies g=358062 c=358061 q=4475)
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.665986] NMI backtrace for cpu 1
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666301] CPU: 1 PID: 14102 Comm: kworker/1:0 Not tainted 4.14.63 #0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666775] Hardware name: XXXXXXXXXX
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667240] Workqueue: wg-crypt-XXXXX 0xffffffffa01dbab0 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667891] Call Trace:
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668145]  <IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668372]  0xffffffff8159c6d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668662]  0xffffffff815a0000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668950]  ? 0xffffffff810418d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669251]  0xffffffff815a0060
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669544]  0xffffffff81041924
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669836]  0xffffffff810c22e3
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670128]  0xffffffff810c176f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670421]  ? 0xffffffff8109fe35
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670720]  ? 0xffffffff810a0062
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671020]  0xffffffff810c432a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671309]  0xffffffff810d0f5e
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671599]  0xffffffff810c4c4f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671892]  0xffffffff810c4df6
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672182]  0xffffffff81602392
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672473]  0xffffffff81601a61
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672760]  </IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672994] RIP: 0010:0xffffffff814e7682
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673327] RSP: 0018:ffffc90000cb3a30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673912] RAX: 00000000000001f8 RBX: ffffc90000cb3af8 RCX: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674426] RDX: ffff880077923e00 RSI: 00000000deb48eb9 RDI: ffff88007aa28e68
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674944] RBP: ffffc90000cb3a80 R08: 0000000000000000 R09: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675456] R10: ffff88007aa28e00 R11: 0000000000000001 R12: ffff880077923e00
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675966] R13: ffffc90000cb3a90 R14: ffff8800786e3a00 R15: ffff88007a360000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676484]  0xffffffff814e7a0a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676773]  0xffffffff814e7d89
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677065]  0xffffffff81532536
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677359]  0xffffffffa01800a7 [iptable_mangle@ffffffffa0180000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677845]  0xffffffff814e2966
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678137]  0xffffffff814ed868
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678430]  ? 0xffffffff814ebed0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678725]  0xffffffff814ed897
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679014]  0xffffffff8152b6bb
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679309]  0xffffffffa002145e [udp_tunnel@ffffffffa0021000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679786]  0xffffffffa01ddf81 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680256]  ? 0xffffffff811038aa
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680555]  ? 0xffffffff810c5454
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680854]  0xffffffffa01dbb5a [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681321]  0xffffffff81091cf4
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681613]  0xffffffff8109204b
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681903]  0xffffffff81096d42
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682191]  ? 0xffffffff81091e40
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682487]  ? 0xffffffff81096c30
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682788]  0xffffffff816001ef

Bootlog:

[    0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Wed Aug 15 20:42:39 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f1b2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f1b3000-0x000000007f1fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f1fb000-0x000000007f314fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f315000-0x000000007f324fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f325000-0x000000007f33bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f344000-0x000000007f358fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f359000-0x000000007f359fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f35a000-0x000000007f377fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f378000-0x000000007f37bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f37c000-0x000000007f38afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f38b000-0x000000007f39bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39c000-0x000000007f39dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f39e000-0x000000007f39efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39f000-0x000000007f3ccfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f3cd000-0x000000007f40ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f410000-0x000000007f58efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f6e5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f6e6000-0x000000007f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Medion E1230/E1230, BIOS 208 02/10/2012
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 write-through
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffffffffff400d10]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[    0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[    0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[    0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[    0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[    0.000000] BRK [0x01e0c000, 0x01e0cfff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MEDION)
[    0.000000] ACPI: XSDT 0x000000007F315070 00005C (v01 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007F3236E8 0000F4 (v04 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007F315158 00E58C (v02 MEDION MEDIONAG 00000001 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000007F390F80 000040
[    0.000000] ACPI: APIC 0x000000007F3237E0 000072 (v03 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: SLIC 0x000000007F323858 000176 (v01 MEDION MEDIONAG 00000001 MSFT 00000001)
[    0.000000] ACPI: ECDT 0x000000007F3239D0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x000000007F323A98 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007F323AD8 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x000000007F323B10 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6effff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f1b2fff]
[    0.000000]   node   0: [mem 0x000000007f410000-0x000000007f58efff]
[    0.000000]   node   0: [mem 0x000000007f6e6000-0x000000007f6effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[    0.000000] On node 0 totalpages: 520921
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 516924 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] random: get_random_bytes called from 0xffffffff81cb0b09 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff88007ee00000 s132056 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s132056 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 512744
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2032612K/2083684K available (8200K kernel code, 527K rwdata, 1312K rodata, 1052K init, 420K bss, 51072K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.040000] tsc: Unable to calibrate against PIT
[    0.040000] tsc: using HPET reference calibration
[    0.040000] tsc: Detected 1595.996 MHz processor
[    0.040000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=15959960)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] ACPI: Core revision 20170728
[    0.068326] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.070105] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.070601] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.071425] Disabled fast string operations
[    0.071787] mce: CPU supports 5 MCE banks
[    0.072125] process: using mwait in idle threads
[    0.072500] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.072914] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.073530] Freeing SMP alternatives memory: 28K
[    0.080265] smpboot: Max logical packages: 2
[    0.081106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.190000] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.190000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.190000] ... version:                3
[    0.190000] ... bit width:              40
[    0.190000] ... generic registers:      2
[    0.190000] ... value mask:             000000ffffffffff
[    0.190000] ... max period:             000000007fffffff
[    0.190000] ... fixed-purpose events:   3
[    0.190000] ... event mask:             0000000700000003
[    0.190000] Hierarchical SRCU implementation.
[    0.190000] smp: Bringing up secondary CPUs ...
[    0.190000] x86: Booting SMP configuration:
[    0.190000] .... node  #0, CPUs:      #1
[    0.010000] Disabled fast string operations
[    0.190000]  #2
[    0.010000] Disabled fast string operations
[    0.190386]  #3
[    0.010000] Disabled fast string operations
[    0.193013] smp: Brought up 1 node, 4 CPUs
[    0.193365] smpboot: Total of 4 processors activated (12767.96 BogoMIPS)
[    0.195434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196180] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.197097] NET: Registered protocol family 16
[    0.198390] cpuidle: using governor ladder
[    0.198390] ACPI: bus type PCI registered
[    0.198390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.200004] PCI: Using configuration type 1 for base access
[    0.217580] ACPI: Added _OSI(Module Device)
[    0.217940] ACPI: Added _OSI(Processor Device)
[    0.218293] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218673] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219086] ACPI: EC: EC started
[    0.219370] ACPI: EC: interrupt blocked
[    0.222270] ACPI: \: Used as first EC
[    0.222591] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.223021] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.223763] ACPI: Executed 1 blocks of module-level executable AML code
[    0.240673] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.242268] ACPI: Dynamic OEM Table Load:
[    0.242613] ACPI: SSDT 0xFFFF88007BD5D800 0002E9 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.246636] ACPI: Dynamic OEM Table Load:
[    0.247070] ACPI: SSDT 0xFFFF88007BC81000 0006DB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.254189] ACPI: Dynamic OEM Table Load:
[    0.256660] ACPI: SSDT 0xFFFF88007C6CB000 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.257695] ACPI: Dynamic OEM Table Load:
[    0.260047] ACPI: SSDT 0xFFFF88007C7DE540 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.264783] ACPI: Interpreter enabled
[    0.265199] ACPI: (supports S0 S5)
[    0.265579] ACPI: Using IOAPIC for interrupt routing
[    0.268058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270580] ACPI: GPE 0x02 active on init
[    0.272964] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.305839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305839] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[    0.305839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.306311] PCI host bridge to bus 0000:00
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.306311] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306721] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[    0.310006] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[    0.310006] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[    0.310006] pci 0000:00:02.0: reg 0x14: [io  0xf100-0xf107]
[    0.315634] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.315634] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[    0.315634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.315960] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.315960] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.316454] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.316454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.316867] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.316867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.317285] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.317285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.317706] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.317706] pci 0000:00:1d.0: reg 0x20: [io  0xf0a0-0xf0bf]
[    0.318128] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.318128] pci 0000:00:1d.1: reg 0x20: [io  0xf080-0xf09f]
[    0.318515] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.318515] pci 0000:00:1d.2: reg 0x20: [io  0xf060-0xf07f]
[    0.318938] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.318938] pci 0000:00:1d.3: reg 0x20: [io  0xf040-0xf05f]
[    0.319336] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.319336] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[    0.319336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.320072] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.320513] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.323112] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.323112] pci 0000:00:1f.2: reg 0x10: [io  0xf0f0-0xf0f7]
[    0.323112] pci 0000:00:1f.2: reg 0x14: [io  0xf0e0-0xf0e3]
[    0.323112] pci 0000:00:1f.2: reg 0x18: [io  0xf0d0-0xf0d7]
[    0.323112] pci 0000:00:1f.2: reg 0x1c: [io  0xf0c0-0xf0c3]
[    0.323112] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf02f]
[    0.323112] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[    0.323112] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.323324] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.324155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.324284] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[    0.324284] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x18: [mem 0xdfe11000-0xdfe11fff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x20: [mem 0xdfe10000-0xdfe10fff 64bit]
[    0.324284] pci 0000:02:00.0: supports D1
[    0.324284] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.324922] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.330068] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.330359] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.330469] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.330614] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[    0.332600] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[    0.333006] pci 0000:03:00.0: supports D1 D2
[    0.333011] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.333210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.333620] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.333630] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.333927] pci 0000:04:00.0: [8086:0896] type 00 class 0x028000
[    0.334057] pci 0000:04:00.0: reg 0x10: [mem 0xdfc00000-0xdfc01fff 64bit]
[    0.334763] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.334942] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.335350] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.335528] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.336039] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.336044] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336049] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336053] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.336057] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.336062] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.336066] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[    0.336070] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.336130] pci_bus 0000:00: on NUMA node 0
[    0.337515] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.338262] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.346039] ACPI: EC: interrupt unblocked
[    0.346039] ACPI: EC: event unblocked
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.348684] SCSI subsystem initialized
[    0.349211] libata version 3.00 loaded.
[    0.349211] ACPI: bus type USB registered
[    0.349789] usbcore: registered new interface driver usbfs
[    0.350039] usbcore: registered new interface driver hub
[    0.350749] usbcore: registered new device driver usb
[    0.351384] PCI: Using ACPI for IRQ routing
[    0.351384] PCI: pci_cache_line_size set to 64 bytes
[    0.351384] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f1b3000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f58f000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[    0.352856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.353253] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.355766] clocksource: Switched to clocksource hpet
[    0.356312] pnp: PnP ACPI init
[    0.357109] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.357615] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.357767] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.358214] system 00:01: [io  0x1000-0x1003] has been reserved
[    0.358667] system 00:01: [io  0x1010-0x101f] has been reserved
[    0.359103] system 00:01: [io  0xffff] has been reserved
[    0.359513] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.359952] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.359952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:02: [io  0x06a0-0x06af] has been reserved
[    0.359952] system 00:02: [io  0x06b0-0x06ff] has been reserved
[    0.359952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.359952] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.359952] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:06: [io  0x025d] has been reserved
[    0.359952] system 00:06: [io  0x025c] has been reserved
[    0.359952] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.360167] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.360645] system 00:06: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.361121] system 00:06: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.361592] system 00:06: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.362072] system 00:06: [mem 0xfec28000-0xfec2ffff] has been reserved
[    0.362553] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.363064] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.363263] pnp 00:07: Plug and Play ACPI device, IDs SYN1d1b SYN1d00 SYN0002 PNP0f13 (active)
[    0.363394] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.363524] system 00:09: [io  0x0240-0x0259] has been reserved
[    0.363991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.364879] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[    0.365372] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.365873] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.366363] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.366857] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367408] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.367898] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.368395] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.368805] system 00:0c: [io  0x0400-0x047f] has been reserved
[    0.369252] system 00:0c: [io  0x0500-0x053f] has been reserved
[    0.369693] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.370228] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.370705] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.371182] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.371676] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[    0.372171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372179] pnp: PnP ACPI: found 13 devices
[    0.380957] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.381648] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.381656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.381662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.381681] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.381688] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.381708] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.381726] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.381733] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.381781] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.382273] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.382870] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.383462] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.384060] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.384646] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.385095] pci 0000:00:1c.1: BAR 7: assigned [io  0x3000-0x3fff]
[    0.385545] pci 0000:00:1c.3: BAR 7: assigned [io  0x4000-0x4fff]
[    0.385998] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.386387] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.386830] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.387314] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.387902] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.388285] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.388736] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.389226] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.389817] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.390233] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.390690] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.391180] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.391775] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.392157] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.392608] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.393098] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.393700] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.394103] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.394108] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.394113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394122] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394126] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394131] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394135] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394140] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.394144] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.394149] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.394153] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.394158] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.394162] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.394166] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.394171] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.394175] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.394179] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.394184] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.394188] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.394193] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.394197] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.394202] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394206] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394210] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394215] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394219] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394224] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394458] NET: Registered protocol family 2
[    0.395149] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.395801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.396424] TCP: Hash tables configured (established 16384 bind 16384)
[    0.397028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.397512] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.398146] NET: Registered protocol family 1
[    0.398540] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.401674] PCI: CLS 64 bytes, default 64
[    0.404203] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    0.408673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.411230] io scheduler noop registered
[    0.411556] io scheduler deadline registered (default)
[    0.412180] gpio_it87: Unknown Chip found, Chip 0202 Revision 2
[    0.413720] hv_vmbus: registering driver hv_pci
[    0.414138] hv_vmbus: registering driver hyperv_fb
[    0.414552] intel_idle: MWAIT substates: 0x3020220
[    0.414554] intel_idle: v0.4.1 model 0x36
[    0.415019] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.415333] ACPI: AC Adapter [AC0] (on-line)
[    0.440589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.470262] ACPI: Lid Switch [LID]
[    0.470749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.471442] ACPI: Sleep Button [SLPB]
[    0.471890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.472528] ACPI: Power Button [PWRF]
[    0.474911] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.475996] thermal LNXTHERM:00: registered as thermal_zone0
[    0.476418] ACPI: Thermal Zone [THRM] (63 C)
[    0.477238] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.480090] Non-volatile memory driver v1.3
[    0.483829] loop: module loaded
[    0.484309] Guest personality initialized and is inactive
[    0.484904] VMCI host device registered (name=vmci, major=10, minor=63)
[    0.485403] Initialized host personality
[    0.485993] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[    0.487067] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[    0.488126] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170728/utaddress-247)
[    0.489188] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20170728/utaddress-247)
[    0.490317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.VGA.TCOI) (20170728/utaddress-247)
[    0.491442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.492164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.493231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.495362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.496081] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.497151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.498214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.498935] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.499659] VMware PVSCSI driver - version 1.0.7.0-k
[    0.500186] hv_vmbus: registering driver hv_storvsc
[    0.500738] ahci 0000:00:1f.2: version 3.0
[    0.501106] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.501649] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.502258] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
[    0.504418] scsi host0: ahci
[    0.505055] scsi host1: ahci
[    0.505678] scsi host2: ahci
[    0.506330] scsi host3: ahci
[    0.506778] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[    0.507357] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[    0.507918] ata3: DUMMY
[    0.508159] ata4: DUMMY
[    0.508915] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[    0.509469] hv_vmbus: registering driver hv_netvsc
[    0.509854] Fusion MPT base driver 3.04.20
[    0.510250] Copyright (c) 1999-2008 LSI Corporation
[    0.510709] Fusion MPT SPI Host driver 3.04.20
[    0.511120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.511607] ehci-pci: EHCI PCI platform driver
[    0.512763] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.513192] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.513793] ehci-pci 0000:00:1d.7: debug port 1
[    0.514113] ACPI: Battery Slot [BAT0] (battery present)
[    0.518488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.518522] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[    0.540123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.541063] hub 1-0:1.0: USB hub found
[    0.541418] hub 1-0:1.0: 8 ports detected
[    0.542734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.543221] ohci-pci: OHCI PCI platform driver
[    0.543620] ohci-platform: OHCI generic platform driver
[    0.544568] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.544990] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.546233] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010
[    0.547982] hub 2-0:1.0: USB hub found
[    0.548435] hub 2-0:1.0: 2 ports detected
[    0.549241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.549668] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.550303] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    0.550935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.551899] hub 3-0:1.0: USB hub found
[    0.552349] hub 3-0:1.0: 2 ports detected
[    0.553301] usbcore: registered new interface driver usb-storage
[    0.553955] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.556563] i8042: Detected active multiplexing controller, rev 1.1
[    0.559170] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.559568] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.559965] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.560407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.560808] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.561255] hv_vmbus: registering driver hyperv_keyboard
[    0.561774] rtc_cmos 00:03: RTC can wake from S4
[    0.562370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.562869] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.564393] sdhci: Secure Digital Host Controller Interface driver
[    0.564865] sdhci: Copyright(c) Pierre Ossman
[    0.566006] hidraw: raw HID events driver (C) Jiri Kosina
[    0.566486] hv_vmbus: registering driver hid_hyperv
[    0.566915] usbcore: registered new interface driver usbhid
[    0.567337] usbhid: USB HID core driver
[    0.567684] hv_utils: Registering HyperV Utility Driver
[    0.568088] hv_vmbus: registering driver hv_util
[    0.568454] hv_vmbus: registering driver hv_balloon
[    0.569382] NET: Registered protocol family 10
[    0.570351] Segment Routing with IPv6
[    0.570715] NET: Registered protocol family 17
[    0.571097] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.571999] 8021q: 802.1Q VLAN Support v1.8
[    0.572509] NET: Registered protocol family 40
[    0.573685] microcode: sig=0x30661, pf=0x8, revision=0x10c
[    0.574234] microcode: Microcode Update Driver: v2.2.
[    0.574273] sched_clock: Marking stable (573441123, 0)->(657968060, -84526937)
[    0.575503] registered taskstats version 1
[    0.576740] rtc_cmos 00:03: setting system clock to 2018-09-07 16:15:12 UTC (1536336912)
[    0.584900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.831528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.834278] ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
[    0.834837] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.837583] ata1.00: configured for UDMA/133
[    0.838642] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5
[    0.841240] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.841885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.842433] sd 0:0:0:0: [sda] Write Protect is off
[    0.842862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.843052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.877982]  sda: sda1 sda2
[    0.880409] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.171549] ata2: SATA link down (SStatus 0 SControl 300)
[    1.186977] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[    1.194364] Freeing unused kernel memory: 1052K
[    1.230632] Write protecting the kernel read-only data: 12288k
[    1.235448] Freeing unused kernel memory: 2024K
[    1.252890] Freeing unused kernel memory: 736K
[    1.487895] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[    1.488460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[    1.566812] init: Console is alive
[    1.796421] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    1.821964] pps_core: LinuxPPS API ver. 1 registered
[    1.822364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.823647] PTP clock support registered
[    1.824343] Button Hotplug driver version 0.4.1
[    1.824818] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    1.830753] init: - preinit -
[    1.890124] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.267747] random: jshn: uninitialized urandom read (4 bytes read)
[    2.309827] random: jshn: uninitialized urandom read (4 bytes read)
[    2.316834] random: jshn: uninitialized urandom read (4 bytes read)
[    2.470351] usb 1-7: new high-speed USB device number 4 using ehci-pci
[    2.490506] clocksource: Switched to clocksource tsc
[    2.691721] usb-storage 1-7:1.0: USB Mass Storage device detected
[    2.692832] scsi host4: usb-storage 1-7:1.0
[    3.754161] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.765748] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.433172] urandom_read: 5 callbacks suppressed
[    5.433177] random: jshn: uninitialized urandom read (4 bytes read)
[    5.722679] F2FS-fs (loop0): Mounted with checkpoint version = 1a030d9d
[    5.751832] mount_root: switching to f2fs overlay
[    5.833723] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    5.839672] urandom-seed: Seeding with /etc/urandom.seed
[    5.914891] procd: - early -
[    6.557234] procd: - ubus -
[    6.596946] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.610617] procd: - init -
[    6.950178] kmodloader: loading kernel modules from /etc/modules.d/*
[    6.954303] tun: Universal TUN/TAP device driver, 1.6
[    6.958028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.958547] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.961325] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    6.961834] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.964069] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.426558] Netfilter messages via NETLINK v0.30.
[    7.428839] ip_set: protocol 6
[    7.450984] i2c /dev entries driver
[    7.487885] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    7.488578] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    7.492106] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.492562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.494282] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.898600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.147745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.149259] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000000b000, e8:40:f2:3f:a9:58, XID 00a00000 IRQ 30
[    8.154185] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[    8.155901] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    8.174092] xt_time: kernel timezone is -0000
[    8.411155] Intel(R) Wireless WiFi driver for Linux
[    8.411610] Copyright(c) 2003- 2015 Intel Corporation
[    8.445655] PPP generic driver version 2.4.2
[    8.447497] NET: Registered protocol family 24
[    8.454488] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    8.455168] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUG disabled
[    8.455610] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
[    8.456054] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
[    8.456529] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[    8.501089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.504079] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.792405] r8169 0000:03:00.0 eth0: link down
[   11.792453] r8169 0000:03:00.0 eth0: link down
[   11.903937] random: fast init done
[   13.415479] r8169 0000:03:00.0 eth0: link up
[   30.131354] random: crng init done
07.09.20181836Base systemBug ReportMediumLowKernel oops when using wireguard and mangle/fwmarkTrunkNew Task Description

On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Ethernet interface being the head-unit connected to a VLAN switch.

Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664463] INFO: rcu_sched self-detected stall on CPU
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664907] 	1-...: (5999 ticks this GP) idle=9ee/140000000000001/0 softirq=961867/961867 fqs=2711
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.665571] 	 (t=6000 jiffies g=358062 c=358061 q=4475)
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.665986] NMI backtrace for cpu 1
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666301] CPU: 1 PID: 14102 Comm: kworker/1:0 Not tainted 4.14.63 #0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666775] Hardware name: XXXXXXXXXX
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667240] Workqueue: wg-crypt-XXXXX 0xffffffffa01dbab0 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667891] Call Trace:
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668145]  <IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668372]  0xffffffff8159c6d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668662]  0xffffffff815a0000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668950]  ? 0xffffffff810418d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669251]  0xffffffff815a0060
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669544]  0xffffffff81041924
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669836]  0xffffffff810c22e3
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670128]  0xffffffff810c176f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670421]  ? 0xffffffff8109fe35
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670720]  ? 0xffffffff810a0062
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671020]  0xffffffff810c432a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671309]  0xffffffff810d0f5e
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671599]  0xffffffff810c4c4f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671892]  0xffffffff810c4df6
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672182]  0xffffffff81602392
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672473]  0xffffffff81601a61
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672760]  </IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672994] RIP: 0010:0xffffffff814e7682
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673327] RSP: 0018:ffffc90000cb3a30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673912] RAX: 00000000000001f8 RBX: ffffc90000cb3af8 RCX: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674426] RDX: ffff880077923e00 RSI: 00000000deb48eb9 RDI: ffff88007aa28e68
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674944] RBP: ffffc90000cb3a80 R08: 0000000000000000 R09: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675456] R10: ffff88007aa28e00 R11: 0000000000000001 R12: ffff880077923e00
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675966] R13: ffffc90000cb3a90 R14: ffff8800786e3a00 R15: ffff88007a360000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676484]  0xffffffff814e7a0a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676773]  0xffffffff814e7d89
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677065]  0xffffffff81532536
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677359]  0xffffffffa01800a7 [iptable_mangle@ffffffffa0180000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677845]  0xffffffff814e2966
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678137]  0xffffffff814ed868
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678430]  ? 0xffffffff814ebed0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678725]  0xffffffff814ed897
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679014]  0xffffffff8152b6bb
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679309]  0xffffffffa002145e [udp_tunnel@ffffffffa0021000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679786]  0xffffffffa01ddf81 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680256]  ? 0xffffffff811038aa
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680555]  ? 0xffffffff810c5454
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680854]  0xffffffffa01dbb5a [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681321]  0xffffffff81091cf4
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681613]  0xffffffff8109204b
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681903]  0xffffffff81096d42
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682191]  ? 0xffffffff81091e40
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682487]  ? 0xffffffff81096c30
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682788]  0xffffffff816001ef

Bootlog:

[    0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Wed Aug 15 20:42:39 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f1b2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f1b3000-0x000000007f1fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f1fb000-0x000000007f314fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f315000-0x000000007f324fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f325000-0x000000007f33bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f344000-0x000000007f358fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f359000-0x000000007f359fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f35a000-0x000000007f377fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f378000-0x000000007f37bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f37c000-0x000000007f38afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f38b000-0x000000007f39bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39c000-0x000000007f39dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f39e000-0x000000007f39efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39f000-0x000000007f3ccfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f3cd000-0x000000007f40ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f410000-0x000000007f58efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f6e5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f6e6000-0x000000007f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Medion E1230/E1230, BIOS 208 02/10/2012
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 write-through
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffffffffff400d10]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[    0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[    0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[    0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[    0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[    0.000000] BRK [0x01e0c000, 0x01e0cfff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MEDION)
[    0.000000] ACPI: XSDT 0x000000007F315070 00005C (v01 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007F3236E8 0000F4 (v04 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007F315158 00E58C (v02 MEDION MEDIONAG 00000001 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000007F390F80 000040
[    0.000000] ACPI: APIC 0x000000007F3237E0 000072 (v03 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: SLIC 0x000000007F323858 000176 (v01 MEDION MEDIONAG 00000001 MSFT 00000001)
[    0.000000] ACPI: ECDT 0x000000007F3239D0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x000000007F323A98 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007F323AD8 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x000000007F323B10 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6effff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f1b2fff]
[    0.000000]   node   0: [mem 0x000000007f410000-0x000000007f58efff]
[    0.000000]   node   0: [mem 0x000000007f6e6000-0x000000007f6effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[    0.000000] On node 0 totalpages: 520921
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 516924 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] random: get_random_bytes called from 0xffffffff81cb0b09 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff88007ee00000 s132056 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s132056 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 512744
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2032612K/2083684K available (8200K kernel code, 527K rwdata, 1312K rodata, 1052K init, 420K bss, 51072K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.040000] tsc: Unable to calibrate against PIT
[    0.040000] tsc: using HPET reference calibration
[    0.040000] tsc: Detected 1595.996 MHz processor
[    0.040000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=15959960)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] ACPI: Core revision 20170728
[    0.068326] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.070105] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.070601] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.071425] Disabled fast string operations
[    0.071787] mce: CPU supports 5 MCE banks
[    0.072125] process: using mwait in idle threads
[    0.072500] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.072914] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.073530] Freeing SMP alternatives memory: 28K
[    0.080265] smpboot: Max logical packages: 2
[    0.081106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.190000] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.190000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.190000] ... version:                3
[    0.190000] ... bit width:              40
[    0.190000] ... generic registers:      2
[    0.190000] ... value mask:             000000ffffffffff
[    0.190000] ... max period:             000000007fffffff
[    0.190000] ... fixed-purpose events:   3
[    0.190000] ... event mask:             0000000700000003
[    0.190000] Hierarchical SRCU implementation.
[    0.190000] smp: Bringing up secondary CPUs ...
[    0.190000] x86: Booting SMP configuration:
[    0.190000] .... node  #0, CPUs:      #1
[    0.010000] Disabled fast string operations
[    0.190000]  #2
[    0.010000] Disabled fast string operations
[    0.190386]  #3
[    0.010000] Disabled fast string operations
[    0.193013] smp: Brought up 1 node, 4 CPUs
[    0.193365] smpboot: Total of 4 processors activated (12767.96 BogoMIPS)
[    0.195434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196180] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.197097] NET: Registered protocol family 16
[    0.198390] cpuidle: using governor ladder
[    0.198390] ACPI: bus type PCI registered
[    0.198390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.200004] PCI: Using configuration type 1 for base access
[    0.217580] ACPI: Added _OSI(Module Device)
[    0.217940] ACPI: Added _OSI(Processor Device)
[    0.218293] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218673] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219086] ACPI: EC: EC started
[    0.219370] ACPI: EC: interrupt blocked
[    0.222270] ACPI: \: Used as first EC
[    0.222591] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.223021] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.223763] ACPI: Executed 1 blocks of module-level executable AML code
[    0.240673] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.242268] ACPI: Dynamic OEM Table Load:
[    0.242613] ACPI: SSDT 0xFFFF88007BD5D800 0002E9 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.246636] ACPI: Dynamic OEM Table Load:
[    0.247070] ACPI: SSDT 0xFFFF88007BC81000 0006DB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.254189] ACPI: Dynamic OEM Table Load:
[    0.256660] ACPI: SSDT 0xFFFF88007C6CB000 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.257695] ACPI: Dynamic OEM Table Load:
[    0.260047] ACPI: SSDT 0xFFFF88007C7DE540 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.264783] ACPI: Interpreter enabled
[    0.265199] ACPI: (supports S0 S5)
[    0.265579] ACPI: Using IOAPIC for interrupt routing
[    0.268058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270580] ACPI: GPE 0x02 active on init
[    0.272964] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.305839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305839] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[    0.305839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.306311] PCI host bridge to bus 0000:00
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.306311] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306721] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[    0.310006] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[    0.310006] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[    0.310006] pci 0000:00:02.0: reg 0x14: [io  0xf100-0xf107]
[    0.315634] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.315634] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[    0.315634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.315960] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.315960] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.316454] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.316454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.316867] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.316867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.317285] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.317285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.317706] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.317706] pci 0000:00:1d.0: reg 0x20: [io  0xf0a0-0xf0bf]
[    0.318128] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.318128] pci 0000:00:1d.1: reg 0x20: [io  0xf080-0xf09f]
[    0.318515] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.318515] pci 0000:00:1d.2: reg 0x20: [io  0xf060-0xf07f]
[    0.318938] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.318938] pci 0000:00:1d.3: reg 0x20: [io  0xf040-0xf05f]
[    0.319336] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.319336] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[    0.319336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.320072] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.320513] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.323112] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.323112] pci 0000:00:1f.2: reg 0x10: [io  0xf0f0-0xf0f7]
[    0.323112] pci 0000:00:1f.2: reg 0x14: [io  0xf0e0-0xf0e3]
[    0.323112] pci 0000:00:1f.2: reg 0x18: [io  0xf0d0-0xf0d7]
[    0.323112] pci 0000:00:1f.2: reg 0x1c: [io  0xf0c0-0xf0c3]
[    0.323112] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf02f]
[    0.323112] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[    0.323112] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.323324] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.324155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.324284] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[    0.324284] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x18: [mem 0xdfe11000-0xdfe11fff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x20: [mem 0xdfe10000-0xdfe10fff 64bit]
[    0.324284] pci 0000:02:00.0: supports D1
[    0.324284] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.324922] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.330068] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.330359] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.330469] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.330614] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[    0.332600] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[    0.333006] pci 0000:03:00.0: supports D1 D2
[    0.333011] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.333210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.333620] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.333630] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.333927] pci 0000:04:00.0: [8086:0896] type 00 class 0x028000
[    0.334057] pci 0000:04:00.0: reg 0x10: [mem 0xdfc00000-0xdfc01fff 64bit]
[    0.334763] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.334942] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.335350] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.335528] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.336039] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.336044] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336049] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336053] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.336057] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.336062] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.336066] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[    0.336070] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.336130] pci_bus 0000:00: on NUMA node 0
[    0.337515] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.338262] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.346039] ACPI: EC: interrupt unblocked
[    0.346039] ACPI: EC: event unblocked
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.348684] SCSI subsystem initialized
[    0.349211] libata version 3.00 loaded.
[    0.349211] ACPI: bus type USB registered
[    0.349789] usbcore: registered new interface driver usbfs
[    0.350039] usbcore: registered new interface driver hub
[    0.350749] usbcore: registered new device driver usb
[    0.351384] PCI: Using ACPI for IRQ routing
[    0.351384] PCI: pci_cache_line_size set to 64 bytes
[    0.351384] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f1b3000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f58f000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[    0.352856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.353253] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.355766] clocksource: Switched to clocksource hpet
[    0.356312] pnp: PnP ACPI init
[    0.357109] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.357615] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.357767] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.358214] system 00:01: [io  0x1000-0x1003] has been reserved
[    0.358667] system 00:01: [io  0x1010-0x101f] has been reserved
[    0.359103] system 00:01: [io  0xffff] has been reserved
[    0.359513] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.359952] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.359952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:02: [io  0x06a0-0x06af] has been reserved
[    0.359952] system 00:02: [io  0x06b0-0x06ff] has been reserved
[    0.359952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.359952] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.359952] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:06: [io  0x025d] has been reserved
[    0.359952] system 00:06: [io  0x025c] has been reserved
[    0.359952] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.360167] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.360645] system 00:06: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.361121] system 00:06: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.361592] system 00:06: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.362072] system 00:06: [mem 0xfec28000-0xfec2ffff] has been reserved
[    0.362553] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.363064] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.363263] pnp 00:07: Plug and Play ACPI device, IDs SYN1d1b SYN1d00 SYN0002 PNP0f13 (active)
[    0.363394] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.363524] system 00:09: [io  0x0240-0x0259] has been reserved
[    0.363991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.364879] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[    0.365372] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.365873] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.366363] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.366857] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367408] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.367898] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.368395] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.368805] system 00:0c: [io  0x0400-0x047f] has been reserved
[    0.369252] system 00:0c: [io  0x0500-0x053f] has been reserved
[    0.369693] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.370228] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.370705] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.371182] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.371676] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[    0.372171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372179] pnp: PnP ACPI: found 13 devices
[    0.380957] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.381648] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.381656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.381662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.381681] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.381688] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.381708] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.381726] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.381733] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.381781] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.382273] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.382870] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.383462] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.384060] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.384646] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.385095] pci 0000:00:1c.1: BAR 7: assigned [io  0x3000-0x3fff]
[    0.385545] pci 0000:00:1c.3: BAR 7: assigned [io  0x4000-0x4fff]
[    0.385998] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.386387] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.386830] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.387314] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.387902] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.388285] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.388736] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.389226] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.389817] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.390233] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.390690] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.391180] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.391775] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.392157] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.392608] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.393098] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.393700] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.394103] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.394108] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.394113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394122] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394126] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394131] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394135] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394140] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.394144] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.394149] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.394153] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.394158] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.394162] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.394166] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.394171] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.394175] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.394179] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.394184] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.394188] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.394193] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.394197] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.394202] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394206] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394210] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394215] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394219] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394224] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394458] NET: Registered protocol family 2
[    0.395149] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.395801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.396424] TCP: Hash tables configured (established 16384 bind 16384)
[    0.397028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.397512] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.398146] NET: Registered protocol family 1
[    0.398540] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.401674] PCI: CLS 64 bytes, default 64
[    0.404203] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    0.408673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.411230] io scheduler noop registered
[    0.411556] io scheduler deadline registered (default)
[    0.412180] gpio_it87: Unknown Chip found, Chip 0202 Revision 2
[    0.413720] hv_vmbus: registering driver hv_pci
[    0.414138] hv_vmbus: registering driver hyperv_fb
[    0.414552] intel_idle: MWAIT substates: 0x3020220
[    0.414554] intel_idle: v0.4.1 model 0x36
[    0.415019] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.415333] ACPI: AC Adapter [AC0] (on-line)
[    0.440589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.470262] ACPI: Lid Switch [LID]
[    0.470749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.471442] ACPI: Sleep Button [SLPB]
[    0.471890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.472528] ACPI: Power Button [PWRF]
[    0.474911] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.475996] thermal LNXTHERM:00: registered as thermal_zone0
[    0.476418] ACPI: Thermal Zone [THRM] (63 C)
[    0.477238] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.480090] Non-volatile memory driver v1.3
[    0.483829] loop: module loaded
[    0.484309] Guest personality initialized and is inactive
[    0.484904] VMCI host device registered (name=vmci, major=10, minor=63)
[    0.485403] Initialized host personality
[    0.485993] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[    0.487067] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[    0.488126] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170728/utaddress-247)
[    0.489188] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20170728/utaddress-247)
[    0.490317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.VGA.TCOI) (20170728/utaddress-247)
[    0.491442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.492164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.493231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.495362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.496081] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.497151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.498214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.498935] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.499659] VMware PVSCSI driver - version 1.0.7.0-k
[    0.500186] hv_vmbus: registering driver hv_storvsc
[    0.500738] ahci 0000:00:1f.2: version 3.0
[    0.501106] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.501649] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.502258] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
[    0.504418] scsi host0: ahci
[    0.505055] scsi host1: ahci
[    0.505678] scsi host2: ahci
[    0.506330] scsi host3: ahci
[    0.506778] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[    0.507357] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[    0.507918] ata3: DUMMY
[    0.508159] ata4: DUMMY
[    0.508915] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[    0.509469] hv_vmbus: registering driver hv_netvsc
[    0.509854] Fusion MPT base driver 3.04.20
[    0.510250] Copyright (c) 1999-2008 LSI Corporation
[    0.510709] Fusion MPT SPI Host driver 3.04.20
[    0.511120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.511607] ehci-pci: EHCI PCI platform driver
[    0.512763] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.513192] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.513793] ehci-pci 0000:00:1d.7: debug port 1
[    0.514113] ACPI: Battery Slot [BAT0] (battery present)
[    0.518488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.518522] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[    0.540123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.541063] hub 1-0:1.0: USB hub found
[    0.541418] hub 1-0:1.0: 8 ports detected
[    0.542734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.543221] ohci-pci: OHCI PCI platform driver
[    0.543620] ohci-platform: OHCI generic platform driver
[    0.544568] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.544990] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.546233] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010
[    0.547982] hub 2-0:1.0: USB hub found
[    0.548435] hub 2-0:1.0: 2 ports detected
[    0.549241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.549668] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.550303] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    0.550935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.551899] hub 3-0:1.0: USB hub found
[    0.552349] hub 3-0:1.0: 2 ports detected
[    0.553301] usbcore: registered new interface driver usb-storage
[    0.553955] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.556563] i8042: Detected active multiplexing controller, rev 1.1
[    0.559170] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.559568] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.559965] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.560407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.560808] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.561255] hv_vmbus: registering driver hyperv_keyboard
[    0.561774] rtc_cmos 00:03: RTC can wake from S4
[    0.562370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.562869] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.564393] sdhci: Secure Digital Host Controller Interface driver
[    0.564865] sdhci: Copyright(c) Pierre Ossman
[    0.566006] hidraw: raw HID events driver (C) Jiri Kosina
[    0.566486] hv_vmbus: registering driver hid_hyperv
[    0.566915] usbcore: registered new interface driver usbhid
[    0.567337] usbhid: USB HID core driver
[    0.567684] hv_utils: Registering HyperV Utility Driver
[    0.568088] hv_vmbus: registering driver hv_util
[    0.568454] hv_vmbus: registering driver hv_balloon
[    0.569382] NET: Registered protocol family 10
[    0.570351] Segment Routing with IPv6
[    0.570715] NET: Registered protocol family 17
[    0.571097] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.571999] 8021q: 802.1Q VLAN Support v1.8
[    0.572509] NET: Registered protocol family 40
[    0.573685] microcode: sig=0x30661, pf=0x8, revision=0x10c
[    0.574234] microcode: Microcode Update Driver: v2.2.
[    0.574273] sched_clock: Marking stable (573441123, 0)->(657968060, -84526937)
[    0.575503] registered taskstats version 1
[    0.576740] rtc_cmos 00:03: setting system clock to 2018-09-07 16:15:12 UTC (1536336912)
[    0.584900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.831528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.834278] ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
[    0.834837] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.837583] ata1.00: configured for UDMA/133
[    0.838642] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5
[    0.841240] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.841885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.842433] sd 0:0:0:0: [sda] Write Protect is off
[    0.842862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.843052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.877982]  sda: sda1 sda2
[    0.880409] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.171549] ata2: SATA link down (SStatus 0 SControl 300)
[    1.186977] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[    1.194364] Freeing unused kernel memory: 1052K
[    1.230632] Write protecting the kernel read-only data: 12288k
[    1.235448] Freeing unused kernel memory: 2024K
[    1.252890] Freeing unused kernel memory: 736K
[    1.487895] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[    1.488460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[    1.566812] init: Console is alive
[    1.796421] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    1.821964] pps_core: LinuxPPS API ver. 1 registered
[    1.822364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.823647] PTP clock support registered
[    1.824343] Button Hotplug driver version 0.4.1
[    1.824818] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    1.830753] init: - preinit -
[    1.890124] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.267747] random: jshn: uninitialized urandom read (4 bytes read)
[    2.309827] random: jshn: uninitialized urandom read (4 bytes read)
[    2.316834] random: jshn: uninitialized urandom read (4 bytes read)
[    2.470351] usb 1-7: new high-speed USB device number 4 using ehci-pci
[    2.490506] clocksource: Switched to clocksource tsc
[    2.691721] usb-storage 1-7:1.0: USB Mass Storage device detected
[    2.692832] scsi host4: usb-storage 1-7:1.0
[    3.754161] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.765748] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.433172] urandom_read: 5 callbacks suppressed
[    5.433177] random: jshn: uninitialized urandom read (4 bytes read)
[    5.722679] F2FS-fs (loop0): Mounted with checkpoint version = 1a030d9d
[    5.751832] mount_root: switching to f2fs overlay
[    5.833723] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    5.839672] urandom-seed: Seeding with /etc/urandom.seed
[    5.914891] procd: - early -
[    6.557234] procd: - ubus -
[    6.596946] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.610617] procd: - init -
[    6.950178] kmodloader: loading kernel modules from /etc/modules.d/*
[    6.954303] tun: Universal TUN/TAP device driver, 1.6
[    6.958028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.958547] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.961325] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    6.961834] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.964069] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.426558] Netfilter messages via NETLINK v0.30.
[    7.428839] ip_set: protocol 6
[    7.450984] i2c /dev entries driver
[    7.487885] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    7.488578] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    7.492106] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.492562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.494282] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.898600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.147745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.149259] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000000b000, e8:40:f2:3f:a9:58, XID 00a00000 IRQ 30
[    8.154185] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[    8.155901] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    8.174092] xt_time: kernel timezone is -0000
[    8.411155] Intel(R) Wireless WiFi driver for Linux
[    8.411610] Copyright(c) 2003- 2015 Intel Corporation
[    8.445655] PPP generic driver version 2.4.2
[    8.447497] NET: Registered protocol family 24
[    8.454488] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    8.455168] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUG disabled
[    8.455610] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
[    8.456054] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
[    8.456529] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[    8.501089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.504079] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.792405] r8169 0000:03:00.0 eth0: link down
[   11.792453] r8169 0000:03:00.0 eth0: link down
[   11.903937] random: fast init done
[   13.415479] r8169 0000:03:00.0 eth0: link up
[   30.131354] random: crng init done
08.04.2017692Base systemBug ReportMediumMediumWLAN AP not working on RasPi (bcm2710 target)TrunkAssigned Task Description

When flashing the brcm2708 / bcm2710 target the WiFi interface gets stuck in “client mode” and the AP will not be able to be brought up.

Some screenshots and a load of discussion here:
https://forum.lede-project.org/t/ap-mode-radio0-in-raspi-3-always-acts-as-a-client-shows-as-wlan0-in-luci/2885

Two more days of tinkering, wifi-up’ing and -down’ing did not bring me further.
I flashed another Pi3 (to exclude a hardware defect) with the same result.

I tried latest snapshot and stable images.
I am happy to help debug – tell me what you need me to do.

Greetings,
–Thomas

17.03.2017634Base systemBug ReportMediumMediumFactory flashing fails because LEDE filename is too lon...AllNew Task Description

On a TP-Link TL-WR841N v11, flashing LEDE from the web interface of the stock firmware is not possible.

This is caused by a stupid check that refuses filename longer than 64 chars in the web interface. The check is implemented in javascript and returns a cryptic error message like “Please select a file to upload”, as if no file was selected.

The current naming scheme is quite long:

$ echo ‘lede-17.01.0-r3205-59508e3-ar71xx-generic-tl-wr841-v11-squashfs-factory-eu.bin’ | wc -c
79

Shortening the name like the following would decrease the length below 64 chars, and leave some space for a custom suffix (e.g. using EXTRA_IMAGE_NAME in the Imagebuilder):

$ echo ‘lede-17.01.0-ar71xx-tlwr841v11-squashfs-factory-eu.bin’ | wc -c
55

09.03.2017609Base systemFeature RequestMediumLowprocd: implement runlevel 1TrunkNew Task Description

Sysupgrade currently kills processes with SIGKILL if they don’t shut down within 3 seconds after the SIGTERM signal. Some processes (e.g. domoticz) can take longer than 3 seconds to properly shut down. As this can potentially corrupt the sqlite database, it should be avoided.

While talking about this on IRC, it was suggested we should implement an “init 1” equivalent in procd. Adding this ticket as a reminder.

17.01.2017395Base systemBug ReportMediumLowmac80211.sh: detect_mac80211 should check available cha...TrunkNew Task Description

This problem was reported by few Netgear R8000 users and I managed to reproduce it. It’s related to the following code:

		vht_cap=$(iw phy "$dev" info | grep -c 'VHT Capabilities')
		cap_5ghz=$(iw phy "$dev" info | grep -c "Band 2")
		[ "$vht_cap" -gt 0 -a "$cap_5ghz" -gt 0 ] && {
			mode_band="a";
			channel="36"
			htmode="VHT80"
		}

Default htmode

The first problem is that even if hardware supports VHT80 it may be not available for every/any current channel. If channel 36 doesn’t support VHT80, for better user experience, it shouldn’t be set in /etc/config/wireless by default. Example:

root@lede:/# iw phy phy2 info
Wiphy phy2
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports roaming.
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 2:
                Capabilities: 0x1062
                        HT20/HT40
                        Static SM Power Save
                        RX HT20 SGI
                        RX HT40 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-23
                VHT Capabilities (0x0c025820):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        short GI (80 MHz)
                        SU Beamformer
                        SU Beamformee
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Frequencies:
                        * 5170 MHz [34] (disabled)
                        * 5180 MHz [36] (20.0 dBm)
                        * 5190 MHz [38] (disabled)
                        * 5200 MHz [40] (20.0 dBm)
                        * 5210 MHz [42] (disabled)
                        * 5220 MHz [44] (20.0 dBm)
                        * 5230 MHz [46] (disabled)
                        * 5240 MHz [48] (20.0 dBm)
                        * 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
                        * 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
                        * 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
                        * 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
                        * 5500 MHz [100] (20.0 dBm) (no IR, radar detection)
                        * 5520 MHz [104] (20.0 dBm) (no IR, radar detection)
                        * 5540 MHz [108] (20.0 dBm) (no IR, radar detection)
                        * 5560 MHz [112] (20.0 dBm) (no IR, radar detection)
                        * 5580 MHz [116] (20.0 dBm) (no IR, radar detection)
                        * 5600 MHz [120] (20.0 dBm) (no IR, radar detection)
                        * 5620 MHz [124] (20.0 dBm) (no IR, radar detection)
                        * 5640 MHz [128] (20.0 dBm) (no IR, radar detection)
                        * 5660 MHz [132] (20.0 dBm) (no IR, radar detection)
                        * 5680 MHz [136] (20.0 dBm) (no IR, radar detection)
                        * 5700 MHz [140] (20.0 dBm) (no IR, radar detection)
                        * 5720 MHz [144] (disabled)
                        * 5745 MHz [149] (disabled)
                        * 5765 MHz [153] (disabled)
                        * 5785 MHz [157] (disabled)
                        * 5805 MHz [161] (disabled)
                        * 5825 MHz [165] (disabled)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 1
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
                 * #{ AP } <= 4,
                   total <= 4, #channels <= 1, STA/AP BI must match
root@lede:/# iw phy phy2 channels
Band 2:
        * 5170 MHz [34] (disabled)
        * 5180 MHz [36] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+
        * 5190 MHz [38] (disabled)
        * 5200 MHz [40] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40-
        * 5210 MHz [42] (disabled)
        * 5220 MHz [44] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+
        * 5230 MHz [46] (disabled)
        * 5240 MHz [48] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40-
        * 5260 MHz [52] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5280 MHz [56] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5300 MHz [60] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5320 MHz [64] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5500 MHz [100] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5520 MHz [104] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5540 MHz [108] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5560 MHz [112] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5580 MHz [116] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5600 MHz [120] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5620 MHz [124] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5640 MHz [128] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5660 MHz [132] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5680 MHz [136] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5700 MHz [140] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5720 MHz [144] (disabled)
        * 5745 MHz [149] (disabled)
        * 5765 MHz [153] (disabled)
        * 5785 MHz [157] (disabled)
        * 5805 MHz [161] (disabled)
        * 5825 MHz [165] (disabled)

as you can see, VHT80 isn’t support on any currently available channel due to regulatory limits.

Default channel

Picking channel 36 blindly is a bad idea as it may not be available. In case of phy0/radio0 on Netgear R8000 only available channels are 149+ due to hardware/board design (see ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000).

root@lede:/# iw phy phy0 info
Wiphy phy0
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports roaming.
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 2:
                Capabilities: 0x1062
                        HT20/HT40
                        Static SM Power Save
                        RX HT20 SGI
                        RX HT40 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-23
                VHT Capabilities (0x0c025820):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        short GI (80 MHz)
                        SU Beamformer
                        SU Beamformee
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Frequencies:
                        * 5170 MHz [34] (disabled)
                        * 5180 MHz [36] (disabled)
                        * 5190 MHz [38] (disabled)
                        * 5200 MHz [40] (disabled)
                        * 5210 MHz [42] (disabled)
                        * 5220 MHz [44] (disabled)
                        * 5230 MHz [46] (disabled)
                        * 5240 MHz [48] (disabled)
                        * 5260 MHz [52] (disabled)
                        * 5280 MHz [56] (disabled)
                        * 5300 MHz [60] (disabled)
                        * 5320 MHz [64] (disabled)
                        * 5500 MHz [100] (disabled)
                        * 5520 MHz [104] (disabled)
                        * 5540 MHz [108] (disabled)
                        * 5560 MHz [112] (disabled)
                        * 5580 MHz [116] (disabled)
                        * 5600 MHz [120] (disabled)
                        * 5620 MHz [124] (disabled)
                        * 5640 MHz [128] (disabled)
                        * 5660 MHz [132] (disabled)
                        * 5680 MHz [136] (disabled)
                        * 5700 MHz [140] (disabled)
                        * 5720 MHz [144] (disabled)
                        * 5745 MHz [149] (20.0 dBm)
                        * 5765 MHz [153] (20.0 dBm)
                        * 5785 MHz [157] (20.0 dBm)
                        * 5805 MHz [161] (20.0 dBm)
                        * 5825 MHz [165] (20.0 dBm)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 1
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
                 * #{ AP } <= 4,
                   total <= 4, #channels <= 1, STA/AP BI must match
root@lede:/# iw phy phy0 channels
Band 2:
        * 5170 MHz [34] (disabled)
        * 5180 MHz [36] (disabled)
        * 5190 MHz [38] (disabled)
        * 5200 MHz [40] (disabled)
        * 5210 MHz [42] (disabled)
        * 5220 MHz [44] (disabled)
        * 5230 MHz [46] (disabled)
        * 5240 MHz [48] (disabled)
        * 5260 MHz [52] (disabled)
        * 5280 MHz [56] (disabled)
        * 5300 MHz [60] (disabled)
        * 5320 MHz [64] (disabled)
        * 5500 MHz [100] (disabled)
        * 5520 MHz [104] (disabled)
        * 5540 MHz [108] (disabled)
        * 5560 MHz [112] (disabled)
        * 5580 MHz [116] (disabled)
        * 5600 MHz [120] (disabled)
        * 5620 MHz [124] (disabled)
        * 5640 MHz [128] (disabled)
        * 5660 MHz [132] (disabled)
        * 5680 MHz [136] (disabled)
        * 5700 MHz [140] (disabled)
        * 5720 MHz [144] (disabled)
        * 5745 MHz [149] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+ VHT80
        * 5765 MHz [153] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40- VHT80
        * 5785 MHz [157] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+ VHT80
        * 5805 MHz [161] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40- VHT80
        * 5825 MHz [165] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz
14.10.2016227Base systemBug ReportMediumHighVLAN support mismatch between preinit and default netwo...TrunkResearching Task Description

PPPoE is broken on WRT1900ACS

Upgraded from Lede r578 to latest Lede r1814 and PPPOE doesn’t work anymore altough the pppd version and PPPoE version are the same:
- Linksys WRT1900ACS
- LEDE reboot r1814

pppd debug log:

Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Timeout waiting for PADO packets
Unable to complete PPPoE Discovery
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]

While on the same hardware running LEDE r578, the PPPoE module works as expected:

Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Recv PPPOE Discovery V1T1 PADO session 0×0 length 40
dst c2:56:27:ca:d7:d4 src a0:f3:e4:34:d8:21
[service-name] [AC-name acc-aln1.hac] [AC-cookie 75 58 37 a5 ba 3c e4 a5 2a 61 bb 23 92 5c 1b dc]
Send PPPOE Discovery V1T1 PADR session 0×0 length 24
dst a0:f3:e4:34:d8:21 src c2:56:27:ca:d7:d4
[service-name] [AC-cookie 75 58 37 a5 ba 3c e4 a5 2a 61 bb 23 92 5c 1b dc]
Recv PPPOE Discovery V1T1 PADS session 0x30b length 4
dst c2:56:27:ca:d7:d4 src a0:f3:e4:34:d8:21
[service-name]
PADS: Service-Name: ‘’ PPP session is 779
Connected to a0:f3:e4:34:d8:21 via interface eth0
using channel 2
Using interface pppoe-wan
Connect: pppoe-wan ←→ eth0
sent [LCP ConfReq id=0×1 <mru 1492> <magic 0xc6952556>]
rcvd [LCP ConfReq id=0×66 <mru 1492> <auth chap MD5> <magic 0x4cc73648>]
sent [LCP ConfAck id=0×66 <mru 1492> <auth chap MD5> <magic 0x4cc73648>]
rcvd [LCP ConfAck id=0×1 <mru 1492> <magic 0xc6952556>]
sent [LCP EchoReq id=0×0 magic=0xc6952556]
rcvd [CHAP Challenge id=0×1 <7131a44524d1de8f1cd1061cac6d8c071d8bfe7351bc4ea7bd08f56684428475f229ba177a192696ebab32>, name = “acc-aln1.hac”]
sent [CHAP Response id=0×1 <4bb1a418b298790b128ad4d7ef3109ad>, name = “bthomehub@btbroadband.com”]
rcvd [LCP EchoRep id=0×0 magic=0x4cc73648]
rcvd [CHAP Success id=0×1 “CHAP authentication success”]
CHAP authentication succeeded: CHAP authentication success
CHAP authentication succeeded
peer from calling number A0:F3:E4:34:D8:21 authorized
sent [IPCP ConfReq id=0×1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
sent [IPV6CP ConfReq id=0×1 <addr fe80::c595:37d1:3987:1929>]
rcvd [IPV6CP ConfReq id=0x7b <addr fe80::0221:05ff:feb4:8824>]
sent [IPV6CP ConfAck id=0x7b <addr fe80::0221:05ff:feb4:8824>]
rcvd [IPCP ConfReq id=0×38 <addr 172.16.12.12>]
sent [IPCP ConfAck id=0×38 <addr 172.16.12.12>]
rcvd [IPCP ConfNak id=0×1 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
sent [IPCP ConfReq id=0×2 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
rcvd [IPV6CP ConfAck id=0×1 <addr fe80::c595:37d1:3987:1929>]
local LL address fe80::c595:37d1:3987:1929
remote LL address fe80::0221:05ff:feb4:8824
Script /lib/netifd/ppp-up started (pid 2646)
rcvd [IPCP ConfAck id=0×2 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
local IP address 81.146.2.155
remote IP address 172.16.12.12
primary DNS address 81.139.57.100
secondary DNS address 81.139.56.100
ppp.log
secondary DNS address 81.139.56.100
Script /lib/netifd/ppp-up started (pid 2653)
Script /lib/netifd/ppp-up finished (pid 2646), status = 0×9 Script /lib/netifd/ppp-up finished (pid 2653), status = 0×9

17.08.201697Base systemBug ReportMediumLowdnsmasq doesn't receive updated dns servers when runnin...TrunkNew Task Description

Bind-mounting /tmp/resolv.conf.auto apparently doesn’t forward inotify events arriving from the kernel when resolv.conf.auto was changed (e.g. upstream DNS servers were received by a DHCP client or pppd). Restarting dnsmasq or running it without ujail solves the issue.

13.07.201650Base systemBug ReportMediumLowNo image or non-verbose output created if image is too ...TrunkNew Task Description

The target/install target does not produce the *squashfs-factory.bin and *squashfs-sysupgrade.bin binaries if the images are too big to fit the selected flash size.
However, make doesn’t say a word to the user but simply does not produce the files. The user has to either check the mtime of the files if they were created earlier or use

make target/install V=s

to derive what’s wrong.
According to jow on IRC this is just an artifact of no way to bypass silent mode. That might be the common explanation but it is still a bug from my POV.

29.05.20203136KernelBug ReportLowLowAlignment exceptions on ipq806x (r7800)TrunkNew Task Description

I’ve got 2 Netgear R7800 with the same firmware built from OpenWrt master and only one of them is throwing alignment exceptions:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.42 (noltari@skynet) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13398+3-48e3449945)) #0 SMP Fri May 29 07:24:24 2020
[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Netgear Nighthawk X4S R7800
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 122880
[    0.000000]   Normal zone: 1080 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 122880 pages, LIFO batch:31
[    0.000000] percpu: Embedded 15 pages/cpu s30028 r8192 d23220 u61440
[    0.000000] pcpu-alloc: s30028 r8192 d23220 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121800
[    0.000000] Kernel command line: 
[    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 474844K/491520K available (5893K kernel code, 188K rwdata, 1504K rodata, 1024K init, 228K bss, 16676K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x340/0x4e8 with crng_init=0
[    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[    0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[    0.000021] Switching to timer-based delay loop, resolution 160ns
[    0.000242] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[    0.000264] pid_max: default: 32768 minimum: 301
[    0.000460] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000479] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.001501] CPU: Testing write buffer coherency: ok
[    0.002636] Setting up static identity map for 0x42300000 - 0x42300060
[    0.002809] rcu: Hierarchical SRCU implementation.
[    0.003291] smp: Bringing up secondary CPUs ...
[    0.005219] smp: Brought up 1 node, 2 CPUs
[    0.005236] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[    0.005246] CPU: All CPU(s) started in SVC mode.
[    0.015473] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[    0.015630] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.015659] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.015823] pinctrl core: initialized pinctrl subsystem
[    0.016942] NET: Registered protocol family 16
[    0.017229] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.018531] cpuidle: using governor ladder
[    0.018598] cpuidle: using governor menu
[    0.055639] usbcore: registered new interface driver usbfs
[    0.055720] usbcore: registered new interface driver hub
[    0.055814] usbcore: registered new device driver usb
[    0.055875] pps_core: LinuxPPS API ver. 1 registered
[    0.055890] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.055930] PTP clock support registered
[    0.057577] clocksource: Switched to clocksource dg_timer
[    0.058439] thermal_sys: Registered thermal governor 'step_wise'
[    0.060795] NET: Registered protocol family 2
[    0.061381] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.061423] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.061467] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.061522] TCP: Hash tables configured (established 4096 bind 4096)
[    0.061627] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.061657] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.061896] NET: Registered protocol family 1
[    0.061954] PCI: CLS 0 bytes, default 64
[    0.063423] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.070052] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.070068] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.110296] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[    0.110440] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[    0.110550] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[    0.110822] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[    0.110850] qcom-pcie 1b500000.pci: Parsing ranges property...
[    0.110898] qcom-pcie 1b500000.pci:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[    0.110937] qcom-pcie 1b500000.pci:   MEM 0x08000000..0x0fdfffff -> 0x08000000
[    0.332501] qcom-pcie 1b500000.pci: Link up
[    0.332674] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[    0.332696] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.332718] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[    0.332735] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[    0.332753] pci_bus 0000:00: scanning bus
[    0.332804] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
[    0.332976] pci 0000:00:00.0: supports D1
[    0.332993] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.333014] pci 0000:00:00.0: PME# disabled
[    0.337082] pci_bus 0000:00: fixups for bus
[    0.337107] PCI: bus0: Fast back to back transfers disabled
[    0.337129] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.337275] pci_bus 0000:01: scanning bus
[    0.337456] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
[    0.337925] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.339073] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.339120] pci 0000:01:00.0: PME# disabled
[    0.343339] pci_bus 0000:01: fixups for bus
[    0.343410] PCI: bus1: Fast back to back transfers disabled
[    0.343428] pci_bus 0000:01: bus scan returning with max=01
[    0.343446] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.343465] pci_bus 0000:00: bus scan returning with max=ff
[    0.343499] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[    0.343524] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[    0.343652] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.343677] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
[    0.343887] pcieport 0000:00:00.0: assign IRQ: got 35
[    0.344639] pcieport 0000:00:00.0: AER: enabled with IRQ 36
[    0.345252] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[    0.345380] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[    0.345517] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[    0.345770] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[    0.345792] qcom-pcie 1b700000.pci: Parsing ranges property...
[    0.345835] qcom-pcie 1b700000.pci:    IO 0x31e00000..0x31efffff -> 0x31e00000
[    0.345869] qcom-pcie 1b700000.pci:   MEM 0x2e000000..0x31dfffff -> 0x2e000000
[    0.575016] qcom-pcie 1b700000.pci: Link up
[    0.575165] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[    0.575184] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.575203] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[    0.575219] pci_bus 0001:00: scanning bus
[    0.575261] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
[    0.575405] pci 0001:00:00.0: supports D1
[    0.575422] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    0.575440] pci 0001:00:00.0: PME# disabled
[    0.579554] pci_bus 0001:00: fixups for bus
[    0.579576] PCI: bus0: Fast back to back transfers disabled
[    0.579594] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.579730] pci_bus 0001:01: scanning bus
[    0.579920] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
[    0.580297] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.581531] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    0.581581] pci 0001:01:00.0: PME# disabled
[    0.581834] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[    0.585838] pci_bus 0001:01: fixups for bus
[    0.585914] PCI: bus1: Fast back to back transfers disabled
[    0.585932] pci_bus 0001:01: bus scan returning with max=01
[    0.585949] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.585967] pci_bus 0001:00: bus scan returning with max=ff
[    0.585991] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[    0.586014] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[    0.586146] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    0.586168] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
[    0.586379] pcieport 0001:00:00.0: assign IRQ: got 37
[    0.587054] pcieport 0001:00:00.0: AER: enabled with IRQ 38
[    0.589655] L2 @ QSB rate. Forcing new rate.
[    0.589884] L2 @ 384000 KHz
[    0.590062] CPU0 @ 800000 KHz
[    0.590074] CPU1 @ QSB rate. Forcing new rate.
[    0.590200] CPU1 @ 384000 KHz
[    0.593784] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[    0.595940] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.596712] msm_serial 16340000.serial: msm_serial: detected port #0
[    0.596767] msm_serial 16340000.serial: uartclk = 7372800
[    0.596839] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 39, base_baud = 460800) is a MSM
[    0.596876] msm_serial: console setup on port #0
[    1.363216] printk: console [ttyMSM0] enabled
[    1.368292] msm_serial: driver initialized
[    1.377328] loop: module loaded
[    1.379017] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xa1
[    1.379280] nand: Micron MT29F1G08ABBEAH4
[    1.385875] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.389975] 8 fixed-partitions partitions found on MTD device qcom_nand.0
[    1.397246] Creating 8 MTD partitions on "qcom_nand.0":
[    1.404197] 0x000000000000-0x000000c80000 : "qcadata"
[    1.414344] random: fast init done
[    1.430388] 0x000000c80000-0x000001180000 : "APPSBL"
[    1.439436] 0x000001180000-0x000001200000 : "APPSBLENV"
[    1.441172] 0x000001200000-0x000001340000 : "art"
[    1.446411] 0x000001340000-0x000001480000 : "artbak"
[    1.451329] 0x000001480000-0x000001880000 : "kernel"
[    1.460780] 0x000001880000-0x000007900000 : "ubi"
[    1.616654] 0x000007900000-0x000008000000 : "reserve"
[    1.630468] libphy: ipq8064_mdio_bus: probed
[    1.680369] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
[    2.830271] ar8327: qca,phy-rgmii-en is not specified
[    2.830690] libphy: Fixed MDIO Bus: probed
[    2.835000] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found
[    2.838388] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found
[    2.846280] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[    2.852700] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[    2.858554] ipq806x-gmac-dwmac 37200000.ethernet: 	DWMAC1000
[    2.865905] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[    2.871821] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[    2.879527] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[    2.887343] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[    2.893240] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[    2.900614] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[    2.907311] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[    2.914952] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[    2.921981] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.929043] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
[    2.936741] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
[    2.944042] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[    2.950690] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[    2.956706] ipq806x-gmac-dwmac 37400000.ethernet: 	DWMAC1000
[    2.964259] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[    2.970068] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[    2.977711] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[    2.985678] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[    2.991489] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[    2.998861] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[    3.005574] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[    3.013201] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[    3.020231] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    3.027308] i2c /dev entries driver
[    3.037342] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    3.038412] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    3.046079] sdhci: Secure Digital Host Controller Interface driver
[    3.052874] sdhci: Copyright(c) Pierre Ossman
[    3.059120] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.066091] NET: Registered protocol family 10
[    3.070704] Segment Routing with IPv6
[    3.073540] NET: Registered protocol family 17
[    3.077458] 8021q: 802.1Q VLAN Support v1.8
[    3.081686] Registering SWP/SWPB emulation handler
[    3.109432] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
[    3.122994] s1a: supplied by regulator-dummy
[    3.123099] s1a: Bringing 0uV into 1050000-1050000uV
[    3.126619] s1b: supplied by regulator-dummy
[    3.131476] s1b: Bringing 0uV into 1050000-1050000uV
[    3.135788] s2a: supplied by regulator-dummy
[    3.140649] s2a: Bringing 0uV into 775000-775000uV
[    3.144996] s2b: supplied by regulator-dummy
[    3.149481] s2b: Bringing 0uV into 775000-775000uV
[    3.155482] Speed bin: 0
[    3.158434] PVS bin: 4
[    3.169157] UBI: auto-attach mtd6
[    3.169175] ubi0: attaching mtd6
[    3.231841] random: crng init done
[    3.863297] ubi0: scanning is finished
[    3.872737] ubi0: attached mtd6 (name "ubi", size 96 MiB)
[    3.872757] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    3.877104] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    3.883959] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    3.890790] ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0
[    3.897503] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    3.903813] ubi0: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1164284368
[    3.910842] ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20
[    3.920258] ubi0: background thread "ubi_bgt0d" started, PID 93
[    3.920861] block ubiblock0_0: created from ubi0:0(rootfs)
[    3.934915] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    3.940521] hctosys: unable to open rtc device (rtc0)
[    3.952741] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    3.954223] Freeing unused kernel memory: 1024K
[    3.988265] Run /sbin/init as init process
[    4.441889] init: Console is alive
[    4.442057] init: - watchdog -
[    5.259389] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.276144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.278921] SCSI subsystem initialized
[    5.285174] libata version 3.00 loaded.
[    5.286877] ahci 29000000.sata: 29000000.sata supply ahci not found, using dummy regulator
[    5.286970] ahci 29000000.sata: 29000000.sata supply phy not found, using dummy regulator
[    5.294151] ahci 29000000.sata: 29000000.sata supply target not found, using dummy regulator
[    5.302769] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[    5.310869] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    5.316080] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
[    5.326028] scsi host0: ahci
[    5.333172] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 26
[    5.660523] ata1: SATA link down (SStatus 0 SControl 300)
[    5.665903] ehci-fsl: Freescale EHCI Host controller driver
[    5.667476] ehci-platform: EHCI generic platform driver
[    5.676974] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.677583] ohci-platform: OHCI generic platform driver
[    5.684512] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
[    5.687166] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
[    5.693178] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
[    5.699223] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
[    5.707257] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
[    5.710836] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
[    5.716504] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
[    5.722664] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
[    5.732523] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
[    5.788480] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
[    5.851309] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    5.851368] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    5.855876] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[    5.863381] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0x11000000
[    5.873615] hub 1-0:1.0: USB hub found
[    5.878642] hub 1-0:1.0: 1 port detected
[    5.882543] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    5.886429] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    5.891780] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    5.899421] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.906190] hub 2-0:1.0: USB hub found
[    5.914200] hub 2-0:1.0: 1 port detected
[    5.919357] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    5.921756] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    5.927172] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[    5.934694] xhci-hcd xhci-hcd.1.auto: irq 44, io mem 0x10000000
[    5.944582] hub 3-0:1.0: USB hub found
[    5.949969] hub 3-0:1.0: 1 port detected
[    5.953865] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    5.957774] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    5.963142] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    5.971416] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.977540] hub 4-0:1.0: USB hub found
[    5.985562] hub 4-0:1.0: 1 port detected
[    5.990721] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.000453] init: - preinit -
[    8.211376] dwmac1000: Master AXI performs any burst length
[    8.211407] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[    8.215754] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[    8.223915] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[    8.232848] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[    8.240251] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[    8.248558] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   12.418896] UBIFS (ubi0:1): Mounting in unauthenticated mode
[   12.419040] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 180
[   12.568955] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   12.568978] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   12.575760] UBIFS (ubi0:1): FS size: 88248320 bytes (84 MiB, 695 LEBs), journal size 4444160 bytes (4 MiB, 35 LEBs)
[   12.585725] UBIFS (ubi0:1): reserved for root: 4168186 bytes (4070 KiB)
[   12.595982] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 05119043-2946-47B5-88DC-46E382FD2959, small LPT model
[   12.608409] mount_root: overlay filesystem has not been fully initialized yet
[   12.614216] mount_root: switching to ubifs overlay
[   12.648550] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off.
[   12.709449] urandom-seed: Seed file not found (/etc/urandom.seed)
[   12.802232] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
[   12.869339] procd: - early -
[   12.869423] procd: - watchdog -
[   13.416076] procd: - watchdog -
[   13.416705] procd: - ubus -
[   13.497779] procd: - init -
[   13.807250] kmodloader: loading kernel modules from /etc/modules.d/*
[   13.807481] urngd: v1.0.2 started.
[   13.822992] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056
[   13.823016] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb
[   13.835774] wireguard: WireGuard 1.0.20200520 loaded. See www.wireguard.com for information.
[   13.835960] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   13.849108] xt_time: kernel timezone is -0000
[   13.878438] PPP generic driver version 2.4.2
[   13.878942] NET: Registered protocol family 24
[   13.894701] ath10k_pci 0000:01:00.0: assign IRQ: got 35
[   13.894721] ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x46.
[   13.895103] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[   13.901316] ath10k_pci 0000:01:00.0: enabling bus mastering
[   13.901842] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   14.586600] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[   14.586649] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   14.600184] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fH-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 5e71f3d8
[   16.923270] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 85498734
[   22.764887] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[   22.765774] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   22.770383] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
[   22.853278] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[   22.854123] ath10k_pci 0000:01:00.0: wmi print 'free: 84872 iram: 13412 sram: 11224'
[   23.143016] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[   23.238959] ath: EEPROM regdomain sanitized
[   23.238979] ath: EEPROM regdomain: 0x64
[   23.238989] ath: EEPROM indicates we should expect a direct regpair map
[   23.239012] ath: Country alpha2 being used: 00
[   23.239022] ath: Regpair used: 0x64
[   23.247470] ath10k_pci 0001:01:00.0: assign IRQ: got 37
[   23.247495] ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x46.
[   23.248218] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[   23.254039] ath10k_pci 0001:01:00.0: enabling bus mastering
[   23.254645] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   23.569431] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[   23.569466] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   23.580837] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-fH-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 5e71f3d8
[   25.965788] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 85498734
[   31.926889] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
[   31.927736] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   31.932304] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
[   32.017922] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[   32.018816] ath10k_pci 0001:01:00.0: wmi print 'free: 84872 iram: 13412 sram: 11224'
[   32.400518] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[   32.489614] ath: EEPROM regdomain sanitized
[   32.489634] ath: EEPROM regdomain: 0x64
[   32.489645] ath: EEPROM indicates we should expect a direct regpair map
[   32.489668] ath: Country alpha2 being used: 00
[   32.489678] ath: Regpair used: 0x64
[   32.501079] kmodloader: done loading kernel modules from /etc/modules.d/*
[   37.152937] Alignment trap: not handling instruction f4410a1f at [<000847ec>]
[   37.152961] 8<--- cut here ---
[   37.159119] Unhandled fault: alignment exception (0x801) at 0x01559594
[   37.161997] pgd = 651ef7ab
[   37.168576] [01559594] *pgd=5dae4835, *pte=5ce8875f, *ppte=5ce88c7f
[   37.267396] dwmac1000: Master AXI performs any burst length
[   37.267427] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[   37.271872] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   37.279913] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[   37.288853] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[   37.295795] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   37.303777] br-lan: port 1(eth1.1) entered blocking state
[   37.313165] br-lan: port 1(eth1.1) entered disabled state
[   37.318698] device eth1.1 entered promiscuous mode
[   37.323850] device eth1 entered promiscuous mode
[   37.328816] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   37.336050] br-lan: port 1(eth1.1) entered blocking state
[   37.339365] br-lan: port 1(eth1.1) entered forwarding state
[   37.354176] dwmac1000: Master AXI performs any burst length
[   37.354204] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found
[   37.358736] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   37.366642] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[   37.375640] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode
[   37.383004] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   37.391748] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   38.009405] pppoe-wan: renamed from ppp0
[   38.220386] ath: EEPROM regdomain: 0x82d4
[   38.220406] ath: EEPROM indicates we should expect a country code
[   38.223369] ath: doing EEPROM country->regdmn map search
[   38.229536] ath: country maps to regdmn code: 0x37
[   38.234824] ath: Country alpha2 being used: ES
[   38.239508] ath: Regpair used: 0x37
[   38.243865] ath: regdomain 0x82d4 dynamically updated by user
[   38.247258] ath: EEPROM regdomain: 0x82d4
[   38.253222] ath: EEPROM indicates we should expect a country code
[   38.257135] ath: doing EEPROM country->regdmn map search
[   38.263284] ath: country maps to regdmn code: 0x37
[   38.268657] ath: Country alpha2 being used: ES
[   38.273192] ath: Regpair used: 0x37
[   38.277623] ath: regdomain 0x82d4 dynamically updated by user
[   38.338720] ath: EEPROM regdomain: 0x8348
[   38.338739] ath: EEPROM indicates we should expect a country code
[   38.341702] ath: doing EEPROM country->regdmn map search
[   38.347781] ath: country maps to regdmn code: 0x3a
[   38.353239] ath: Country alpha2 being used: US
[   38.357816] ath: Regpair used: 0x3a
[   38.362187] ath: regdomain 0x8348 dynamically updated by user
[   38.365596] ath: EEPROM regdomain: 0x8348
[   38.371530] ath: EEPROM indicates we should expect a country code
[   38.375469] ath: doing EEPROM country->regdmn map search
[   38.381626] ath: country maps to regdmn code: 0x3a
[   38.386926] ath: Country alpha2 being used: US
[   38.391586] ath: Regpair used: 0x3a
[   38.395951] ath: regdomain 0x8348 dynamically updated by user
[   38.401528] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   45.445311] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
[   45.445523] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   45.450813] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
[   45.536265] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[   45.537153] ath10k_pci 0001:01:00.0: wmi print 'free: 84872 iram: 13412 sram: 11224'
[   46.077345] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[   46.086199] Alignment trap: not handling instruction f4410a1f at [<000847ec>]
[   46.087292] 8<--- cut here ---
[   46.094611] Unhandled fault: alignment exception (0x801) at 0x01a5a264
[   46.097449] pgd = 7d425fb1
[   46.104035] [01a5a264] *pgd=5d7b7835, *pte=5ca0175f, *ppte=5ca01c7f
[   46.123943] br-lan: port 2(wlan1) entered blocking state
[   46.123966] br-lan: port 2(wlan1) entered disabled state
[   46.128620] device wlan1 entered promiscuous mode
[   46.299909] ath10k_pci 0001:01:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
[   52.074815] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[   52.075005] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   52.080305] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
[   52.163253] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[   52.164139] ath10k_pci 0000:01:00.0: wmi print 'free: 84872 iram: 13412 sram: 11224'
[   52.550134] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[   52.557649] br-lan: port 3(wlan0) entered blocking state
[   52.560295] br-lan: port 3(wlan0) entered disabled state
[   52.566172] device wlan0 entered promiscuous mode
[   52.571247] br-lan: port 3(wlan0) entered blocking state
[   52.575456] br-lan: port 3(wlan0) entered forwarding state
[   52.591728] br-lan: port 3(wlan0) entered disabled state
[   52.592799] Alignment trap: not handling instruction f4410a1f at [<000847ec>]
[   52.596110] 8<--- cut here ---
[   52.603242] Unhandled fault: alignment exception (0x801) at 0x01bc62e4
[   52.606082] pgd = 86e3b05f
[   52.612661] [01bc62e4] *pgd=5bcc5835, *pte=5ce4875f, *ppte=5ce48c7f
[   52.638123] ath: EEPROM regdomain: 0x82d4
[   52.638142] ath: EEPROM indicates we should expect a country code
[   52.641103] ath: doing EEPROM country->regdmn map search
[   52.647182] ath: country maps to regdmn code: 0x37
[   52.652660] ath: Country alpha2 being used: ES
[   52.657164] ath: Regpair used: 0x37
[   52.661679] ath: regdomain 0x82d4 dynamically updated by user
[   52.665059] ath: EEPROM regdomain: 0x82d4
[   52.670969] ath: EEPROM indicates we should expect a country code
[   52.674873] ath: doing EEPROM country->regdmn map search
[   52.681023] ath: country maps to regdmn code: 0x37
[   52.686328] ath: Country alpha2 being used: ES
[   52.691008] ath: Regpair used: 0x37
[   52.695357] ath: regdomain 0x82d4 dynamically updated by user
[   57.763032] Alignment trap: not handling instruction f4410a1f at [<000847ec>]
[   57.763083] 8<--- cut here ---
[   57.769331] Unhandled fault: alignment exception (0x801) at 0x01149304
[   57.772119] pgd = 14e00733
[   57.778718] [01149304] *pgd=5d912835, *pte=5cc3c75f, *ppte=5cc3cc7f
[   61.286218] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   61.286646] br-lan: port 2(wlan1) entered blocking state
[   61.291784] br-lan: port 2(wlan1) entered forwarding state
[   62.892597] Alignment trap: not handling instruction f4410a1f at [<000847ec>]
[   62.892649] 8<--- cut here ---
[   62.898868] Unhandled fault: alignment exception (0x801) at 0x01f27384
[   62.901683] pgd = 6ad7711d
[   62.908316] [01f27384] *pgd=5bade835, *pte=5c95e75f, *ppte=5c95ec7f
[   63.282491] ath10k_pci 0001:01:00.0: Invalid peer id 0 or peer stats buffer, peer: a5e6e0b2  sta: 19341bd9
[   68.024534] Alignment trap: not handling instruction f4410a1f at [<000847ec>]
[   68.024581] 8<--- cut here ---
[   68.030891] Unhandled fault: alignment exception (0x801) at 0x01580384
[   68.033621] pgd = 9bca4f46
[   68.040260] [01580384] *pgd=5d7c2835, *pte=5cfa775f, *ppte=5cfa7c7f
[  111.787534] ath10k_pci 0001:01:00.0: Invalid VHT mcs 15 peer stats
[  115.687531] ath10k_pci 0000:01:00.0: mac flush null vif, drop 0 queues 0xffff
[  115.718101] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  115.718254] br-lan: port 3(wlan0) entered blocking state
[  115.723523] br-lan: port 3(wlan0) entered forwarding state
[  200.884296] ath10k_pci 0001:01:00.0: htt tx: fixing invalid VHT TX rate code 0xff

The device appears to work normally, but it’s quite strange that only one of them is showing these exceptions...

08.05.20203073KernelBug ReportLowHighAR8337/AR8327 Flow Control Enabled on Archer C7 v5 (and...TrunkUnconfirmed Task Description

I have a TP-Link Archer C7 v5 (ath79/generic) running OpenWrt 19.07.2 r10947-65030d81f3 and periodically one of my hosts sends out a long-running flood (10/sec) of MPCP Pause frames. The AR8337 switch is configured to honor these frames on port 0 (CPU), and other ports, so stops switching frames essentially forever.

There is no way exposed to user to disable flow control.

Flow control should be turned off unless explicitly requested by the user (e.g., they are in a Datacenter/Enterprise environment and/or doing Fibre Channel over Ethernet). This is exactly the opposite of how it currently is with the added benefit that the user cannot change the behavior.

Here’s a tool that will helpfully generate MPCP Pause frames:
https://github.com/nwholloway/mpcp

You can use this to bring down your network indefinitely. Additionally, since the AR8337 switch consumes these frames you will not be able to see them from the OpenWRT host.

29.01.20202781Base systemBug ReportLowMediumArcher C50 v4 Mac80211 Looses Internet Access after 20’...openwrt-19.07New Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Problem Device:
TP-Link Archer C50 (Canadian) v4 + v4.2

Software version:
openwrt 19.07 r10860, default packages versions.

Steps to reproduce:
Setup wireless like below. I’ve intentionally left encryption set to “none” for both radio’s for quick testing but i’ve tested with WPA2 CCMP encryption with no change in results.

config wifi-device ‘radio0’ option type ‘mac80211’ option channel ‘11’ option hwmode ‘11g’ option path ‘platform/10300000.wmac’ option htmode ‘HT20’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio0’ option device ‘radio0’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

config wifi-device ‘radio1’ option type ‘mac80211’ option hwmode ‘11a’ option path ‘pci0000:00/0000:00:00.0/0000:01:00.0’ option htmode ‘VHT80’ option channel ‘112’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio1’ option device ‘radio1’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

Alternative Settings:

htmode ‘HT40’ No change in results
channel ‘1’, ‘6’, ‘11’ No change in results
disassoc_low_ack ‘0’ No change in results

03.09.2017998PackagesBug ReportLowLowpackages: "make packages/X/check" should print warnings...TrunkNew Task Description

Currently, when running “make check” on a single package, it does not print any warning. V=s is needed to see the warnings. The build system should print the warnings in all cases, because that’s what the user asks for!

To reproduce:

$ make package/nlbwmon/check 
 make[1] package/nlbwmon/check
 make[2] -C feeds/packages/net/nlbwmon check
$ make package/nlbwmon/check V=s
make[1]: Entering directory '/tmp/lede'
make[2]: Entering directory '/tmp/lede/feeds/packages/net/nlbwmon'
WARNING: nlbwmon-2017-08-02-32fc0925.tar.xz is missing, please run make download before re-running this check
make[2]: Leaving directory '/tmp/lede/feeds/packages/net/nlbwmon'
make[1]: Leaving directory '/tmp/lede'

The main target make check (without specifying any package) works fine, because it seems to run in verbose mode by default:

$ make check
make[3]: Entering directory '/tmp/lede/tools/gmp'
make[3]: Leaving directory '/tmp/lede/tools/gmp'
...
make[3]: Entering directory '/tmp/lede/package/network/utils/iwinfo'
WARNING: PKG_MIRROR_HASH is missing, set to 7bd294f50f8ec8c0497c5fbe5527f3ae098814cdfeecf4ccf78a2a8937611664
make[3]: Leaving directory '/tmp/lede/package/network/utils/iwinfo'
...

I tried to fix the issue myself but this is way above my understanding of make.

05.07.20203216PackagesBug ReportVery LowMediumEnable by default ed25519 on dropbearTrunkUnconfirmed Task Description

Hello,

As of latest master OpenWRT still does not enable ed25519 by default in dropbear.
ed25519 is becoming fairly widespread and is even the current default key exchange algorithm in OpenSSH.
As per https://github.com/mkj/dropbear/pull/91 adding this feature would only add around 8KB to the build size of dropbear max
and as per your build files 12KB in MIPS.
I believe 10Kb is relatively negligible, even for routers, and as such I don’t really see
any reason to have it disabled by default, especially when something as
crucial as public key ssh gets broken otherwise without any warning, leading to a horrendous UX.

Would you be so kind as to think about changing the default?

Thanks

02.07.20203215Base systemBug ReportVery LowMediumMultiple kernel oops in airtime fairness (potentially) ...TrunkUnconfirmed Task Description

Device: Netgear R6260
Build: r13611-3f27a6e640 - downloaded from openwrt site
Target: ramips/mt7621
Arch: mipsel_24kc

Seems to happen during normal use of router - simple configuration of 1 2.4ghz network and 1 5ghz network, connected over ethernet to AT&T “really-not-DSL-but-kind-of” service. (400mbit bidirectional)

I had 2 oops within 24 hours of operation. I am unsure of steps to reproduce yet.
I have not rebooted, but I suspect the second oops was a side effect of the first one.

SQM configured but specifically disabled since I wanted to test hardware offloading capabilities.

[   15.183669] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=24
[   15.194488] pci 0000:00:01.0: enabling device (0004 -> 0007)
[   15.205781] mt7603e 0000:02:00.0: enabling device (0000 -> 0002)
[   15.217920] mt7603e 0000:02:00.0: ASIC revision: 76030010
[   15.847734] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
[   15.858870] mt7603e 0000:02:00.0: Build Time: 20160107100755
[   15.894419] mt7603e 0000:02:00.0: firmware init done
[   16.080391] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   16.091938] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=23
[   16.102807] pci 0000:00:00.0: enabling device (0004 -> 0007)
[   16.114166] mt7615e 0000:01:00.0: enabling device (0000 -> 0002)
[   16.140685] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   16.238338] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
[   16.568442] mt7615e 0000:01:00.0: N9 Firmware Version: 2.0, Build Time: 20200131181812
[   16.594490] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307
[ 3850.067170] ------------[ cut here ]------------
[ 3850.076587] WARNING: CPU: 0 PID: 0 at backports-5.7-rc3-1/net/mac80211/sta_info.c:1929 ieee80211_sta_update_pending_airtime+0x22c/0x234 [mac80211]
[ 3850.102772] STA f8:e9:4e:4e:ff:f1 AC 2 txq pending airtime underflow: 4294966536, 760
[ 3850.102778] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD xt_CT pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack_netlink nf_conntrack mt7615e mt7615_common mt7603e mt76 mac80211 ipt_REJECT ebtable_nat ebtable_filter ebtable_broute cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_recent xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY wireguard slhc sch_cake nlmon nfnetlink_queue nfnetlink_log nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables ebtables ebt_vlan ebt_stp ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_among ebt_802_3 crc_ccitt compat sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic
[ 3850.118561]  act_skbedit act_mirred dwc3 ohci_platform ohci_hcd ledtrig_usbport ledtrig_heartbeat xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ahci libahci libata fsl_mph_dr_of ehci_platform ehci_fsl sd_mod scsi_mod ehci_hcd ifb ip6_udp_tunnel udp_tunnel netlink_diag leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
[ 3850.419155] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.48 #0
[ 3850.430934] Stack : 86f2de80 80077324 806c0000 806bc3bc 80720000 806bc384 806bb4d8 87c0dc44
[ 3850.447558]         80860000 80707248 80706d83 80651380 00000000 00000001 87c0dbe8 077483ba
[ 3850.464170]         00000000 00000000 808a0000 00000000 00000030 0000016d 342e3520 2038342e
[ 3850.480782]         00000000 000000bf 00000000 00066553 00000000 80720000 00000000 86408a84
[ 3850.497395]         00000009 00000000 00000000 86f2e000 00000002 8033d914 00000000 80860000
[ 3850.514009]         ...
[ 3850.518860] Call Trace:
[ 3850.523742] [<8000b72c>] show_stack+0x30/0x100
[ 3850.532579] [<805945b4>] dump_stack+0xa4/0xdc
[ 3850.541245] [<80028058>] __warn+0xc0/0x10c
[ 3850.549383] [<80028130>] warn_slowpath_fmt+0x8c/0xac
[ 3850.559389] [<86408a84>] ieee80211_sta_update_pending_airtime+0x22c/0x234 [mac80211]
[ 3850.574838] [<8640205c>] ieee80211_report_low_ack+0xf0/0x43c [mac80211]
[ 3850.588039] [<864023c0>] ieee80211_free_txskb+0x18/0x30 [mac80211]
[ 3850.600375] [<86f25468>] mt76_tx_complete_skb+0xa8/0xbc [mt76]
[ 3850.611991] [<86feaa20>] mt7615_txp_skb_unmap+0x1f4/0x230 [mt7615_common]
[ 3850.625731] ---[ end trace 176fb10434b931c6 ]---
[22886.192908] ------------[ cut here ]------------
[22886.202177] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:448 dev_watchdog+0x2fc/0x304
[22886.218705] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
[22886.232589] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD xt_CT pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack_netlink nf_conntrack mt7615e mt7615_common mt7603e mt76 mac80211 ipt_REJECT ebtable_nat ebtable_filter ebtable_broute cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_recent xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY wireguard slhc sch_cake nlmon nfnetlink_queue nfnetlink_log nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables ebtables ebt_vlan ebt_stp ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_among ebt_802_3 crc_ccitt compat sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic
[22886.232777]  act_skbedit act_mirred dwc3 ohci_platform ohci_hcd ledtrig_usbport ledtrig_heartbeat xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ahci libahci libata fsl_mph_dr_of ehci_platform ehci_fsl sd_mod scsi_mod ehci_hcd ifb ip6_udp_tunnel udp_tunnel netlink_diag leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
[22886.533261] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G        W         5.4.48 #0
[22886.547802] Stack : ffffffff 80077324 806c0000 806bc3bc 80720000 806bc384 806bb4d8 87c11db4
[22886.564425]         80860000 87c3c728 80706d83 80651380 00000002 00000001 87c11d58 077483ba
[22886.581050]         00000000 00000000 808a0000 00000000 00000030 000001b9 342e3520 2038342e
[22886.597673]         00000000 00000472 00000000 0008230d 00000000 80720000 00000000 8045e458
[22886.614291]         00000009 00000002 00200000 00000122 00000002 8033d914 00000008 80860008
[22886.630914]         ...
[22886.635772] Call Trace:
[22886.640663] [<8000b72c>] show_stack+0x30/0x100
[22886.649507] [<805945b4>] dump_stack+0xa4/0xdc
[22886.658176] [<80028058>] __warn+0xc0/0x10c
[22886.666317] [<80028130>] warn_slowpath_fmt+0x8c/0xac
[22886.676230] [<8045e458>] dev_watchdog+0x2fc/0x304
[22886.685595] [<800904e4>] call_timer_fn.isra.34+0x20/0x90
[22886.696155] [<8009072c>] run_timer_softirq+0x1d8/0x230
[22886.706398] [<805b510c>] __do_softirq+0x16c/0x334
[22886.715788] [<8002c80c>] irq_exit+0x98/0xb0
[22886.724121] [<802dcec0>] plat_irq_dispatch+0x64/0x104
[22886.734175] [<80006de8>] except_vec_vi_end+0xb8/0xc4
[22886.744064] [<805b47c0>] r4k_wait_irqoff+0x1c/0x24
[22886.753828] ---[ end trace 176fb10434b931c7 ]---

ethtool configuration dump:


Features for eth0:
rx-checksumming: on
tx-checksumming: on
	tx-checksum-ipv4: on
	tx-checksum-ip-generic: off [fixed]
	tx-checksum-ipv6: on
	tx-checksum-fcoe-crc: off [fixed]
	tx-checksum-sctp: off [fixed]
scatter-gather: on
	tx-scatter-gather: on
	tx-scatter-gather-fraglist: off [fixed]
tcp-segmentation-offload: on
	tx-tcp-segmentation: on
	tx-tcp-ecn-segmentation: off [fixed]
	tx-tcp-mangleid-segmentation: on
	tx-tcp6-segmentation: on
generic-segmentation-offload: on
generic-receive-offload: on
large-receive-offload: off [fixed]
rx-vlan-offload: on
tx-vlan-offload: on
ntuple-filters: off [fixed]
receive-hashing: off [fixed]
highdma: off [fixed]
rx-vlan-filter: off [fixed]
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
netns-local: off [fixed]
tx-gso-robust: off [fixed]
tx-fcoe-segmentation: off [fixed]
tx-gre-segmentation: off [fixed]
tx-gre-csum-segmentation: off [fixed]
tx-ipxip4-segmentation: off [fixed]
tx-ipxip6-segmentation: off [fixed]
tx-udp_tnl-segmentation: off [fixed]
tx-udp_tnl-csum-segmentation: off [fixed]
tx-gso-partial: off [fixed]
tx-sctp-segmentation: off [fixed]
tx-esp-segmentation: off [fixed]
tx-udp-segmentation: off [fixed]
fcoe-mtu: off [fixed]
tx-nocache-copy: off
loopback: off [fixed]
rx-fcs: off [fixed]
rx-all: off [fixed]
tx-vlan-stag-hw-insert: off [fixed]
rx-vlan-stag-hw-parse: off [fixed]
rx-vlan-stag-filter: off [fixed]
l2-fwd-offload: off [fixed]
hw-tc-offload: off [fixed]
esp-hw-offload: off [fixed]
esp-tx-csum-hw-offload: off [fixed]
rx-udp_tunnel-port-offload: off [fixed]
tls-hw-tx-offload: off [fixed]
tls-hw-rx-offload: off [fixed]
rx-gro-hw: off [fixed]
tls-hw-record: off [fixed]

I’m attaching the full ‘dmesg’ output with this submission.

I can provide package list/configuration files if it will help.


02.07.20203214Base systemBug ReportVery LowLowmesh doesn't work on DFS channels on ETSI domainTrunkUnconfirmed Task Description

Device: 2x Yuncore XD4200
OpenWrt version: 19.07.3
Radios: QCA9888 using ath10k-ct driver

Steps to reproduce:

  • Configure the 5GHz radio on a DFS channel using some ETSI regulatory domain (example: ES) on both APs:

/etc/config/wireless

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11a'
	option path 'pci0000:00/0000:00:00.0'
	option legacy_rates '0'
	option txpower '15'
	option channel '100'
	option htmode 'VHT40'
	option country 'ES'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option mesh_rssi_threshold '0'
	option mesh_fwding '1'
	option mode 'mesh'
	option mesh_id 'TESTMESH'
	option network 'MESH'
	option key '12345678'
	option encryption 'sae'
  • Configure an interface with static AP for the APs:

(AP1) /etc/config/network

config interface 'MESH'
	option proto 'static'
	option ipaddr '192.168.150.10'
	option netmask '255.255.255.0'

(AP2) /etc/config/network

config interface 'MESH'
	option proto 'static'
	option ipaddr '192.168.150.11'
	option netmask '255.255.255.0'
  • Reload wifi on both APs and wait for DFS scan to end

Logread output shows the following errors:

Thu Jul  2 11:32:23 2020 daemon.notice wpa_supplicant[6831]: wlan0: MESH-GROUP-STARTED ssid="TESTMESH" id=0
Thu Jul  2 11:33:24 2020 daemon.notice wpa_supplicant[6831]: wlan0: DFS-CAC-COMPLETED freq=5500 success=1 ht_enabled=1 chan_offset=1 chan_width=2 cf1=5510 cf2=0
Thu Jul  2 11:33:24 2020 daemon.notice wpa_supplicant[6831]: wlan0: interface state DFS->ENABLED
Thu Jul  2 11:33:24 2020 daemon.notice wpa_supplicant[6831]: wlan0: AP-ENABLED
Thu Jul  2 11:33:24 2020 daemon.notice wpa_supplicant[6831]: wlan0: joining mesh TESTMESH
Thu Jul  2 11:33:25 2020 daemon.notice wpa_supplicant[6831]: wlan0: CTRL-EVENT-CONNECTED - Connection to 00:00:00:00:00:00 completed [id=0 id_str=]
Thu Jul  2 11:33:25 2020 daemon.notice netifd: Network device 'wlan0' link is up
Thu Jul  2 11:33:25 2020 daemon.notice netifd: Interface 'MESH' has link connectivity
Thu Jul  2 11:33:25 2020 kern.info kernel: [ 8103.892412] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thu Jul  2 11:33:28 2020 daemon.notice wpa_supplicant[6831]: wlan0: new peer notification for aa:bb:cc:dd:ee:ff
Thu Jul  2 11:33:28 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:28 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: new peer notification for aa:bb:cc:dd:ee:ff
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: new peer notification for aa:bb:cc:dd:ee:ff
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: new peer notification for aa:bb:cc:dd:ee:ff
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:29 2020 daemon.notice wpa_supplicant[6831]: wlan0: new peer notification for aa:bb:cc:dd:ee:ff
Thu Jul  2 11:33:30 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:30 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:30 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame
Thu Jul  2 11:33:30 2020 daemon.notice wpa_supplicant[6831]: wlan0: Mesh MPM: failed to send peering frame

In this scenario, an user is unable to connect to the MESH peer.

Note: if you change the radio regulatory domain to a non-ETSI (example: US), it works correctly

This hostapd patch appears to be the root problem cause:

  • package/network/services/hostapd/patches/015-mesh-do-not-use-offchan-mgmt-tx-on-DFS.patch

(previous versions of this patch disallowed offchannel tx for all DFS domains, not only for non-ETSI)

02.07.20203213KernelBug ReportVery LowHighLantiq-XRX200: Fritzbox 7360 SL PCie Link up failes! - ...TrunkUnconfirmed Task Description

On my Lantiq-XRX200 device Fritzbox 7360 SL, the WIFI PHy doesnt gets detected anymore. right after 1 second when booting the device. i get a kernel warning that the “PCIe PHY cant get detected and right after that 5 lines of
“PCIe phy_link_up timeout”

This happend in release of 19.07.x and trunk.

 

[ 0.864077] ifx_pcie_wait_phy_link_up timeout
[ 1.081343] ifx_pcie_wait_phy_link_up timeout
[ 1.298569] ifx_pcie_wait_phy_link_up timeout
[ 1.302795] pcie_rc_initialize link up failed!!!!!

02.07.20203212Base systemBug ReportVery LowLowfail to generate json overview image info with python3....TrunkUnconfirmed Task Description

With commit 263f7e5bbd119ebed1f514c16f659a2e2a2b132c, fail to generate json overview image info with python3.6.

$ python3 --version
Python 3.6.8
$ make V=sc -r json_overview_image_info
make[1]: Entering directory `/firmware'
cd "/firmware"; git log --format=%h -1 toolchain > /firmware/tmp/.ver_check
cmp -s /firmware/tmp/.ver_check /firmware/staging_dir/toolchain-mips_24kc_gcc-8.4.0_musl/stamp/.ver_check || { \
	rm -rf /firmware/build_dir/target-mips_24kc_musl /firmware/staging_dir/target-mips_24kc_musl /firmware/staging_dir/toolchain-mips_24kc_gcc-8.4.0_musl /firmware/build_dir/toolchain-mips_24kc_gcc-8.4.0_musl; \
	mkdir -p /firmware/staging_dir/toolchain-mips_24kc_gcc-8.4.0_musl/stamp; \
	mv /firmware/tmp/.ver_check /firmware/staging_dir/toolchain-mips_24kc_gcc-8.4.0_musl/stamp/.ver_check; \
}
WORK_DIR=/firmware/build_dir/target-mips_24kc_musl/json_info_files /firmware/scripts/json_overview_image_info.py /firmware/bin/targets/ath79/nand/profiles.json 
Traceback (most recent call last):
  File "/firmware/scripts/json_overview_image_info.py", line 47, in <module>
    text=True,
  File "/usr/lib64/python3.6/subprocess.py", line 423, in run
    with Popen(*popenargs, **kwargs) as process:
TypeError: __init__() got an unexpected keyword argument 'capture_output'
make[1]: *** [/firmware/bin/targets/ath79/nand/profiles.json] Error 1
make[1]: Leaving directory `/firmware'
make: *** [json_overview_image_info] Error 2

Patch:
Work as expected with 3.6, not sure if this patch is working with other versions.

diff --git a/scripts/json_overview_image_info.py b/scripts/json_overview_image_info.py
index 59d69df314..3dd8c9c353 100755
--- a/scripts/json_overview_image_info.py
+++ b/scripts/json_overview_image_info.py
@@ -2,7 +2,7 @@
 
 from os import getenv, environ
 from pathlib import Path
-from subprocess import run
+from subprocess import run, PIPE
 from sys import argv
 import json
 
@@ -41,10 +41,10 @@ output["default_packages"] = run(
         f"target/linux/{output['target'].split('/')[0]}",
         "val.DEFAULT_PACKAGES",
     ],
-    capture_output=True,
+    stdout=PIPE, stderr=PIPE,
     check=True,
     env=environ.copy().update({"TOPDIR": Path().cwd()}),
-    text=True,
+    universal_newlines=True,
 ).stdout.split()
 
 if output:
30.06.20203211KernelBug ReportVery LowCriticalwrt1200ac issue with mvneta driver in 5.4 kernel - inte...TrunkUnconfirmed Task Description

wrt1200ac works OK with 4.19.108 kernel. eth1 is the upstream port, eth0 is the 4 local gigabit ports. dmesg reports:

[ 1.098981] 0×000000280000-0×000000900000 : “unused_area” [ 1.105081] libphy: Fixed MDIO Bus: probed
[ 1.109546] libphy: orion_mdio_bus: probed
[ 1.113853] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.122882] mvneta f1070000.ethernet eth0: Using hardware mac address c0:56:27:70:5b:65
[ 1.132447] mvneta f1034000.ethernet eth1: Using random mac address 9e:2e:40:0f:3a:63
[ 1.140510] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.147081] ehci-pci: EHCI PCI platform driver
[ 1.151575] ehci-platform: EHCI generic platform driver
[ 1.156913] ehci-orion: EHCI orion driver
[ 1.161040] orion-ehci f1058000.usb: EHCI Host Controller

Under the 5.4.48 kernel, eth1 doesn’t show up, so no upstream connectivity.

[ 1.208713] orion-mdio f1072004.mdio: IRQ index 0 not found
[ 1.214360] libphy: orion_mdio_bus: probed
[ 1.218622] mv88e6085 f1072004.mdio-mii:00: switch 0×1760 detected: Marvell 88E6176, revision 1
[ 1.389672] libphy: mv88e6xxx SMI: probed
[ 1.395805] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.404784] mvneta f1070000.ethernet eth0: Using hardware mac address c0:56:27:70:5b:65
[ 1.412919] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.419511] ehci-pci: EHCI PCI platform driver
[ 1.424011] ehci-platform: EHCI generic platform driver
[ 1.429356] ehci-orion: EHCI orion driver
[ 1.433476] orion-ehci f1058000.usb: EHCI Host Controller


30.06.20203210Base systemBug ReportVery LowVery Lowdo not hard-code IS_TTY in script scripts/feedsTrunkUnconfirmed Task Description

Tool “scripts/feeds” assumes you are always outputting to a terminal, so it will fill your log files with terminal control codes. That comes up as rubbish, or as very long lines, or both, in many text editors.

I have jumped through all the hoops and provided a patch to fix it:

build: do not hard-code IS_TTY in script scripts/feeds

https://patchwork.ozlabs.org/project/openwrt/patch/mailman.22006.1591783382.2542.openwrt-devel@lists.openwrt.org/

This bug is somehow related to bug FS#2086.

29.06.20203209Base systemBug ReportVery LowMediumpcengines_apuv2 does no support PcEngines APU4TrunkUnconfirmed Task Description

Device: PC Engines APU4
OpenWrt 2020-Jun-28 snapshot

Small regression. The led-apu2 driver which did support the APU4 was removed in favor of the pcengines-apu2 module. However, the pcengines-apu2 in the 5.4 branch does not support the APU4 [1]. The module in the 5.5 branch does support the APU4 [2].

[1] https://github.com/torvalds/linux/blob/v5.4/drivers/platform/x86/pcengines-apuv2.c [2] https://github.com/torvalds/linux/blob/v5.5/drivers/platform/x86/pcengines-apuv2.c

Related Commits by @feckert and committed by @hauke
kernel/leds-apu2: remove deprecated leds-apu2 driver: https://github.com/openwrt/openwrt/commit/2b550a6be198ff78ac672d654d867ff1a0a13760 kernel: add pcengines-apu2 module description: https://github.com/openwrt/openwrt/commit/f3c5c09e5ad6671519c6a3b29f9c6adb7fff66cb

System Info:

root@OpenWrt:~# modprobe pcengines_apuv2
1 module could not be probed
- pcengines-apuv2

root@OpenWrt:~# dmesg | grep pcengines_apuv2
[ 9.610885] pcengines_apuv2: failed to detect apu board via dmi
[ 9.744176] pcengines_apuv2: failed to detect apu board via dmi

Handle 0×0000, DMI type 0, 26 bytes
BIOS Information

Vendor: coreboot
Version: v4.12.0.1
Release Date: 05/29/2020
ROM Size: 8192 kB
Characteristics:
	PCI is supported
	PC Card (PCMCIA) is supported
	BIOS is upgradeable
	Selectable boot is supported
	ACPI is supported
	Targeted content distribution is supported
BIOS Revision: 4.12
Firmware Revision: 0.0

	
27.06.20203207Base systemBug ReportVery LowHighSetting MTU on Bridged interfaces does not set MTU on m...openwrt-19.07Unconfirmed Task Description

- Device problem occurs on - x86
- Software versions of OpenWrt/LEDE release, packages, etc. - 19.07.3

 

I think it’s a bug/overlooked use case, but when you have interfaces bridged in the UCI config, the MTU setting does not get applied to the member interfaces (physical or VLAN).

config interface 'lan'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '192.168.1.1'
        option type 'bridge'
        option mtu '9000'
        option ifname 'eth1 eth4.10'

When I boot using this config I have connectivity issues with devices using Jumbo frames. ifconfig confirms that MTUs on the members interfaces are still at default 1500.

eth1      Link encap:Ethernet  HWaddr 0C:C4:7A:AB:39:3D
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Memory:df440000-df45ffff

eth4      Link encap:Ethernet  HWaddr 3C:FD:FE:BB:01:50
          inet6 addr: fe80::3efd:feff:febb:150/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500 Metric:1
          RX packets:50176 errors:0 dropped:1 overruns:0 frame:0
          TX packets:37468 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:15692679 (14.9 MiB)  TX bytes:29263711 (27.9 MiB)

eth4.10   Link encap:Ethernet  HWaddr 3C:FD:FE:BB:01:50
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:36728 errors:0 dropped:0 overruns:0 frame:0
          TX packets:20850 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:9314410 (8.8 MiB)  TX bytes:26473088 (25.2 MiB)

I have to manually use the ifconfig tool to set the MTU (i.e. ifconfig eth4.10 mtu 9000) to get the network back up and running correctly.

Obviously these commands could be scritped, however it was my understanding the UCI network config should be doing this .

27.06.20203206Base systemBug ReportVery LowCriticalsysupgrade from 18.06.8 to 19.07.0..trunk results in a ...TrunkUnconfirmed Task Description

After a sysupgrade from 18.06.8 to 19.07.0, 19.07.3, or trunk as of 2020-06-28, the router is stuck in an UBI-related boot loop.

Boot log for trunk:

===================================================================
                MT7621   stage1 code 10:33:11 (ASIC)
                CPU=50000000 HZ BUS=16666666 HZ
==================================================================
Change MPLL source from XTAL to CR...
do MEMPLL setting..
MEMPLL Config : 0x11100000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1200Mhz ===
PLL2 FB_DL: 0xf, 1/0 = 634/390 3D000000
PLL4 FB_DL: 0x14, 1/0 = 514/510 51000000
PLL3 FB_DL: 0x1a, 1/0 = 703/321 69000000
do DDR setting..[00320381]
Apply DDR3 Setting...(use customer AC)
          0    8   16   24   32   40   48   56   64   72   80   88   96  104  112  120
W: g.applet.interface.uart: 3173 frame or parity errors detected
      --------------------------------------------------------------------------------
0000:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0001:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0002:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0003:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0004:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0005:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0006:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0007:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0008:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0009:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    1    1    1
000E:|    0    0    0    0    0    0    0    0    1    1    1    1    1    1    1    1
000F:|    0    0    0    0    1    1    1    1    1    1    1    1    0    0    0    0
0010:|    1    1    1    1    1    1    1    1    0    0    0    0    0    0    0    0
0011:|    1    1    1    0    0    0    0    0    0    0    0    0    0    0    0    0
0012:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0013:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0014:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0015:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0016:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0017:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0018:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0019:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001E:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001F:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
rank 0 coarse = 16
rank 0 fine = 32
B:|    0    0    0    0    0    0    0    0    1    1    1    0    0    0    0    0
opt_dle value:9
DRAMC_R0DELDLY[018]=00001B1C
==================================================================
                RX      DQS perbit delay software calibration 
==================================================================
1.0-15 bit dq delay value
==================================================================
bit|     0  1  2  3  4  5  6  7  8  9
--------------------------------------
0 |    10 8 10 11 11 7 11 8 8 9 
10 |    9 12 7 10 9 11 
--------------------------------------

==================================================================
2.dqs window
x=pass dqs delay value (min~max)center 
y=0-7bit DQ of every group
input delay:DQS0 =28 DQS1 = 27
==================================================================
bit     DQS0     bit      DQS1
0  (1~53)27  8  (1~53)27
1  (1~52)26  9  (1~49)25
2  (1~53)27  10  (1~53)27
3  (1~55)28  11  (1~52)26
4  (1~54)27  12  (1~53)27
5  (0~53)26  13  (1~51)26
6  (1~52)26  14  (1~52)26
7  (1~52)26  15  (1~53)27
==================================================================
3.dq delay value last
==================================================================
bit|    0  1  2  3  4  5  6  7  8   9
--------------------------------------
0 |    11 10 11 11 12 9 13 10 8 11 
10 |    9 13 7 11 10 11 
==================================================================
==================================================================
     TX  perbyte calibration 
==================================================================
DQS loop = 15, cmp_err_1 = ffff0800 
dqs_perbyte_dly.last_dqsdly_pass[0]=15,  finish count=1 
DQS loop = 14, cmp_err_1 = ffff0000 
dqs_perbyte_dly.last_dqsdly_pass[1]=14,  finish count=2 
DQ loop=15, cmp_err_1 = ffff01aa
DQ loop=14, cmp_err_1 = ffff0080
dqs_perbyte_dly.last_dqdly_pass[1]=14,  finish count=1 
DQ loop=13, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqdly_pass[0]=13,  finish count=2 
byte:0, (DQS,DQ)=(9,8)
byte:1, (DQS,DQ)=(8,8)
20,data:89
[EMI] DRAMC calibration passed

===================================================================
                MT7621   stage1 code done 
                CPU=50000000 HZ BUS=16666666 HZ
===================================================================


U-Boot 1.1.3 (Aug 30 2017 - 02:28:33)

Board: Ralink APSoC DRAM:  256 MB
relocate_code Pointer at: 8ffb0000

Config XHCI 40M PLL 
Allocate 16 byte aligned buffer: 8ffe1940
Enable NFI Clock
# MTK NAND # : Use HW ECC
NAND ID [C2 DA 90 95 06]
Device found in MTK table, ID: c2da, EXT_ID: 909506
Support this Device in MTK table! c2da 
select_chip
[NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
Signature matched and data read!
load_fact_bbt success 2047
load fact bbt success
[mtk_nand] probe successfully!
mtd->writesize=2048 mtd->oobsize=64,    mtd->erasesize=131072  devinfo.iowidth=8
..
UBNT e51 13-02122-14 B4FBE4B3E6EE
UBNT BD type=e51, mac=B4FBE4B3E6EE, s/n=B4FBE4B3E6EE, mrev=14, k_idx=1
============================================ 
Ralink UBoot Version: 4.3.S.0
-------------------------------------------- 
ASIC MT7621A DualCore (MAC to MT7530 Mode)
DRAM_CONF_FROM: Auto-Detection 
DRAM_TYPE: DDR3 
DRAM bus: 16 bit
Xtal Mode=3 OCP Ratio=1/3
Flash component: NAND Flash
Date:Aug 30 2017  Time:02:28:33
============================================ 
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:256, ways:4, linesz:32 ,total:32768 

 ##### The CPU freq = 880 MHZ #### 
 estimate memory size =256 Mbytes
#Reset_MT7530
Enable port 0

Please choose the operation: 
   1: Load system code to SDRAM via TFTP. 
   2: Load system code then write to Flash via TFTP. 
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   7: Load Boot Loader code then write to Flash via Serial. 
   9: Load Boot Loader code then write to Flash via TFTP. 
default: 3
 3 
You choosed 3

 0 
   
3: System Boot system code via Flash.
## Booting image at c0040000 ...
   Image Name:   MIPS OpenWrt Linux-5.4.48
   Image Type:   MIPS Linux Kernel Image (uncompressed)
   Data Size:    2435865 Bytes =  2.3 MB
   Load Address: 80001000
   Entry Point:  80001000
......................................   Verifying Checksum ... OK
OK
No initrd
## Transferring control to Linux (at address 80001000) ...
## Giving linux memsize in MB, 256

Starting kernel ...



OpenWrt kernel loader for MIPS based SoC
Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
Decompressing kernel... done!
Starting kernel at 80001000...

[    0.000000] Linux version 5.4.48 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13649-b1d5ab1a69)) #0 SMP Fri Jun 26 22:33:29 2020
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Ubiquiti EdgeRouter X SFP
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] percpu: Embedded 14 pages/cpu s26704 r8192 d22448 u57344
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00032940
[    0.000000] Readback ErrCtl register=00032940
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 250536K/262144K available (5846K kernel code, 201K rwdata, 1260K rodata, 1256K init, 237K bss, 11608K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 256
[    0.000000] random: get_random_bytes called from start_kernel+0x340/0x558 with crng_init=0
[    0.000000] CPU Clock: 880MHz
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.015483] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
[    0.055830] pid_max: default: 32768 minimum: 301
[    0.065180] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.079586] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.097702] rcu: Hierarchical SRCU implementation.
[    0.107813] smp: Bringing up secondary CPUs ...
[    4.135874] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    4.135885] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    4.135897] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    4.135995] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.144999] Synchronize counters for CPU 1: done.
[    4.226937] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    4.226945] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    4.226952] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    4.227006] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.239460] Synchronize counters for CPU 2: done.
[    4.318055] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    4.318064] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    4.318072] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    4.318129] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.327061] Synchronize counters for CPU 3: done.
[    0.386664] smp: Brought up 1 node, 4 CPUs
[    0.398972] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.418237] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.432169] pinctrl core: initialized pinctrl subsystem
[    0.443530] NET: Registered protocol family 16
[    0.481661] clocksource: Switched to clocksource GIC
[    0.493356] NET: Registered protocol family 2
[    0.502975] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.519574] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.534699] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.548872] TCP: Hash tables configured (established 2048 bind 2048)
[    0.561648] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.574529] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.588595] NET: Registered protocol family 1
[    0.597152] PCI: CLS 0 bytes, default 32
[    0.693612] 4 CPUs re-calibrate udelay(lpj = 1167360)
[    0.705093] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    0.719864] random: fast init done
[    0.725746] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.738153] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.760502] GPIO line 487 (sfp_i2c_clk_gate) hogged as output/high
[    0.772946] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.784177] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.795396] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.807068] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.822849] printk: console [ttyS0] disabled
[    0.831301] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[    0.849226] printk: console [ttyS0] enabled
[    0.849226] printk: console [ttyS0] enabled
[    0.865790] printk: bootconsole [early0] disabled
[    0.865790] printk: bootconsole [early0] disabled
[    0.886838] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388
[    0.901809] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
[    0.914464] nand: Macronix MX30LF2G18AC
[    0.922100] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.937174] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
[    0.950207] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[    0.964763] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[    0.979322] Scanning device for bad blocks
[    2.388364] Bad eraseblock 1105 at 0x000008a20000
[    3.591347] 6 fixed-partitions partitions found on MTD device mt7621-nand
[    3.604863] Creating 6 MTD partitions on "mt7621-nand":
[    3.615275] 0x000000000000-0x000000080000 : "u-boot"
[    3.626464] 0x000000080000-0x0000000e0000 : "u-boot-env"
[    3.638343] 0x0000000e0000-0x000000140000 : "factory"
[    3.649566] 0x000000140000-0x000000440000 : "kernel1"
[    3.660834] 0x000000440000-0x000000740000 : "kernel2"
[    3.672135] 0x000000740000-0x00000ff00000 : "ubi"
[    3.684934] libphy: Fixed MDIO Bus: probed
[    3.720110] libphy: mdio: probed
[    3.726777] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    3.741399] mtk_soc_eth 1e100000.ethernet dsa: mediatek frame engine at 0xbe100000, irq 20
[    3.759062] i2c-mt7621 1e000900.i2c: clock 100 kHz
[    3.772209] NET: Registered protocol family 10
[    3.782778] Segment Routing with IPv6
[    3.790195] NET: Registered protocol family 17
[    3.799123] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    3.825176] 8021q: 802.1Q VLAN Support v1.8
[    3.835469] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    3.858806] libphy: dsa slave smi: probed
[    3.867214] mt7530 mdio-bus:1f eth0 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
[    3.885166] mt7530 mdio-bus:1f eth1 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
[    3.903046] mt7530 mdio-bus:1f eth2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
[    3.920926] mt7530 mdio-bus:1f eth3 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
[    3.938853] mt7530 mdio-bus:1f eth4 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
[    3.956767] mt7530 mdio-bus:1f eth5 (uninitialized): PHY [mdio-bus:07] driver [Atheros 8031 ethernet]
[    3.976479] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
[    3.994051] DSA: tree 0 setup
[    4.000412] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
[    4.001465] UBI: auto-attach mtd5
[    4.020764] ubi0: attaching mtd5
[    5.358573] ubi0 error: ubi_attach: bad image sequence number 1717396771 in PEB 1048, expected 1051561099
[    5.377643] Erase counter header dump:
[    5.385097]  magic          0x55424923
[    5.392554]  version        1
[    5.398455]  ec             0
[    5.404352]  vid_hdr_offset 2048
[    5.410778]  data_offset    4096
[    5.417194]  image_seq      1717396771
[    5.424651]  hdr_crc        0x41f68dff
[    5.432107] erase counter header hexdump:
[    5.440521] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd5, error -22
[    5.454595] UBI error: cannot attach mtd5
[    5.462601] hctosys: unable to open rtc device (rtc0)
[    5.473495] /dev/root: Can't open blockdev
[    5.481701] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[    5.496596] Please append a correct "root=" boot option; here are the available partitions:
[    5.513231] 1f00             512 mtdblock0 
[    5.513235]  (driver?)
[    5.526248] 1f01             384 mtdblock1 
[    5.526251]  (driver?)
[    5.539271] 1f02             384 mtdblock2 
[    5.539274]  (driver?)
[    5.552283] 1f03            3072 mtdblock3 
[    5.552286]  (driver?)
[    5.565294] 1f04            3072 mtdblock4 
[    5.565298]  (driver?)
[    5.578321] 1f05          253696 mtdblock5 
[    5.578324]  (driver?)
[    5.591333] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    5.607798] Rebooting in 1 seconds..

I’ve observed a few different errors on 19.07.3:

[    3.452384] UBI: auto-attach mtd5
[    3.459042] ubi0: attaching mtd5
[    5.063106] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
[    5.731856] ubi0: scanning is finished
[    5.753342] ubi0 error: 0x802f7820: bad attaching information, error 1
[    5.766336] Volume attaching information dump:
[    5.775176]  vol_id         0
[    5.781076]  highest_lnum   526
[    5.787307]  leb_count      15
[    5.793384]  compat         0
[    5.799284]  vol_type       3
[    5.805170]  used_ebs       0
[    5.811068]  last_data_size 0
[    5.816954]  data_pad       0
[    5.818148] mtk_soc_eth 1e100000.ethernet eth0: port 1 link down
[    5.822855] Volume information dump:
[    5.841894]  vol_id          0
[    5.847953]  reserved_pebs   14
[    5.854197]  alignment       1
[    5.860273]  data_pad        0
[    5.866332]  vol_type        3
[    5.872403]  name_len        6
[    5.878461]  usable_leb_size 126976
[    5.885396]  used_ebs        14
[    5.891642]  used_bytes      1777664
[    5.898752]  last_eb_bytes   126976
[    5.905674]  corrupted       0
[    5.911746]  upd_marker      0
[    5.917805]  name            rootfs
[    5.925375] ubi0 error: 0x802fb1ec: failed to attach mtd5, error -22
[    5.938048] UBI error: cannot attach mtd5
[    3.443331] UBI: auto-attach mtd5
[    3.450022] ubi0: attaching mtd5
[    4.654666] ubi0 error: 0x80307340: bad image sequence number 1717396771 in PEB 1048, expected 1051561099
[    4.673719] Erase counter header dump:
[    4.681180]  magic          0x55424923
[    4.688623]  version        1
[    4.694526]  ec             0
[    4.700432]  vid_hdr_offset 2048
[    4.706837]  data_offset    4096
[    4.713259]  image_seq      1717396771
[    4.720720]  hdr_crc        0x41f68dff
[    4.728160] erase counter header hexdump:
[    4.736480] ubi0 error: 0x802fb1ec: failed to attach mtd5, error -22
[    4.749165] UBI error: cannot attach mtd5
27.06.20203205KernelBug ReportVery LowLowKernel trace: drivers/reset/core.c:556 __reset_control_...TrunkUnconfirmed Task Description

Seems to occur at least on all ar934x on ath79 target, both on kernel 4 and testing kernel 5

Experienced by me while porting ENS202EXT to ath79
My pull request:
https://github.com/openwrt/openwrt/pull/3014

Experienced by @rogerpueyo while porting MikroTik SXT Lite5 (SXT 5nD r2) to ath79
Forum post:
https://forum.openwrt.org/t/porting-the-mikrotik-sxt-lite5-sxt-5nd-r2-from-ar71xx-to-ath79/66592

may effect many more

Full kernel log:
https://gist.github.com/mpratt14/e9195a555f54e098fff6c21ad5c1bb36

[    1.161884] ------------[ cut here ]------------
[    1.166682] WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:556 __reset_control_get_internal+0x15c/0x190
[    1.176216] Modules linked in:
[    1.179327] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.48 #0
[    1.185164] Stack : 80640000 805dfdf8 00000000 00000000 805defc8 83c2795c 83c282fc 80615d03
[    1.193661]         805819c4 00000001 807732d8 00000001 00000000 00000001 83c27910 712127d8
[    1.202152]         00000000 00000000 807a0000 0000005e 61696e74 00000000 2e342e34 38202330
[    1.210643]         0000005e 8cc27632 00000000 0002bc7f 00000000 00000009 00000000 802d7130
[    1.219135]         00000009 00000001 00000000 83c82a10 00000000 802ee410 00000000 80770000
[    1.227627]         ...
[    1.230121] Call Trace:
[    1.232637] [<80069934>] show_stack+0x30/0x100
[    1.237187] [<8007e7f8>] __warn+0xc0/0x10c
[    1.241360] [<8007e8a0>] warn_slowpath_fmt+0x5c/0xac
[    1.246414] [<802d7130>] __reset_control_get_internal+0x15c/0x190
[    1.252605] [<802d72a4>] __of_reset_control_get+0x140/0x1fc
[    1.258273] [<802d762c>] __devm_reset_control_get+0x70/0x108
[    1.264054] [<803538a8>] ag71xx_mdio_probe+0xbc/0x208
[    1.269221] [<80301cdc>] platform_drv_probe+0x40/0x94
[    1.274358] [<802ffe30>] really_probe+0x104/0x358
[    1.279145] [<802fdf20>] bus_for_each_drv+0x70/0xb0
[    1.284108] [<802ffce8>] __device_attach+0xdc/0x118
[    1.289072] [<802fee58>] bus_probe_device+0x9c/0xb8
[    1.294033] [<802fc22c>] device_add+0x3e4/0x608
[    1.298655] [<80368abc>] of_platform_device_create_pdata+0xa8/0x150
[    1.305026] [<80368ca4>] of_platform_bus_create+0x134/0x224
[    1.310692] [<80368f10>] of_platform_populate+0x78/0xec
[    1.316019] [<80355bd8>] ag71xx_probe+0x6e4/0x98c
[    1.320814] [<80301cdc>] platform_drv_probe+0x40/0x94
[    1.325952] [<802ffe30>] really_probe+0x104/0x358
[    1.330741] [<80300578>] device_driver_attach+0x70/0x98
[    1.336056] [<80300600>] __driver_attach+0x60/0x100
[    1.341017] [<802fde60>] bus_for_each_dev+0x68/0xa4
[    1.345979] [<802ff1cc>] bus_add_driver+0x1f0/0x200
[    1.350944] [<80300c6c>] driver_register+0x84/0x148
[    1.355912] [<80651920>] ag71xx_module_init+0x2c/0x50
[    1.361046] [<80060a1c>] do_one_initcall+0x7c/0x1dc
[    1.366010] [<8063de10>] kernel_init_freeable+0x158/0x23c
[    1.371512] [<804f50d8>] kernel_init+0x10/0xf0
[    1.376032] [<80064d98>] ret_from_kernel_thread+0x14/0x1c
[    1.381534] ---[ end trace f4d8db1ba0a810bb ]---
26.06.20203204KernelBug ReportVery LowHighmac80211 crashTrunkUnconfirmed Task Description

Netgear R7800 running hnyman’s build master-r13625-d4dea7efcd-20200624-ath10k

[104369.085841] ------------[ cut here ]------------
[104369.091780] WARNING: CPU: 0 PID: 0 at backports-5.7-rc3-1/net/mac80211/sta_info.c:1929 ieee80211_sta_update_pending_airtime+0x1f8/0x1fc [mac80211]
[104369.096329] STA f0:18:xxxxx AC 2 txq pending airtime underflow: 4294967244, 52
[104369.096332] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pptp pppox ppp_mppe ppp_generic mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_MASQUERADE xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY wireguard slhc sch_cake nf_reject_ipv4 nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack_netlink nf_conncount iptable_raw iptable_nat iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables crc_ccitt compat chaoskey fuse sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport ledtrig_heartbeat xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac
[104369.109593]  ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_NPT nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 msdos ip_gre gre ifb ip6_udp_tunnel udp_tunnel sit tunnel4 ip_tunnel tun vfat fat hfsplus cifs nls_utf8 nls_iso8859_15 nls_iso8859_1 nls_cp850 nls_cp437 nls_cp1250 sha1_generic md5 md4 ecb des_generic libdes arc4 usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom ohci_platform ohci_hcd phy_qcom_dwc3 ahci fsl_mph_dr_of ehci_platform ehci_fsl sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 exfat(C) crc32c_generic
[104369.256372] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G         C        5.4.48 #0
[104369.278522] Hardware name: Generic DT based system
[104369.286004] [<c030f954>] (unwind_backtrace) from [<c030b96c>] (show_stack+0x14/0x20)
[104369.290607] [<c030b96c>] (show_stack) from [<c08ba2e0>] (dump_stack+0x94/0xa8)
[104369.298594] [<c08ba2e0>] (dump_stack) from [<c031e7b4>] (__warn+0xb4/0xd0)
[104369.305702] [<c031e7b4>] (__warn) from [<c031e850>] (warn_slowpath_fmt+0x80/0x90)
[104369.312720] [<c031e850>] (warn_slowpath_fmt) from [<bf691af0>] (ieee80211_sta_update_pending_airtime+0x1f8/0x1fc [mac80211])
[104369.320482] [<bf691af0>] (ieee80211_sta_update_pending_airtime [mac80211]) from [<bf68d734>] (ieee80211_tx_monitor+0xe38/0x10c0 [mac80211])
[104369.331785] [<bf68d734>] (ieee80211_tx_monitor [mac80211]) from [<bf68da18>] (ieee80211_tx_status+0x5c/0x6c [mac80211])
[104369.344456] [<bf68da18>] (ieee80211_tx_status [mac80211]) from [<bf7588e4>] (ath10k_txrx_tx_unref+0x130/0x318 [ath10k_core])
[104369.355280] [<bf7588e4>] (ath10k_txrx_tx_unref [ath10k_core]) from [<bf755264>] (ath10k_htt_txrx_compl_task+0x7d0/0x1058 [ath10k_core])
[104369.366428] [<bf755264>] (ath10k_htt_txrx_compl_task [ath10k_core]) from [<bf7a3b3c>] (ath10k_pci_napi_poll+0x58/0x11c [ath10k_pci])
[104369.378748] [<bf7a3b3c>] (ath10k_pci_napi_poll [ath10k_pci]) from [<c0773a2c>] (net_rx_action+0x118/0x374)
[104369.390603] [<c0773a2c>] (net_rx_action) from [<c0302298>] (__do_softirq+0x130/0x2d4)
[104369.400148] [<c0302298>] (__do_softirq) from [<c0322c10>] (irq_exit+0xbc/0xe0)
[104369.408132] [<c0322c10>] (irq_exit) from [<c036d150>] (__handle_domain_irq+0x6c/0xd0)
[104369.415343] [<c036d150>] (__handle_domain_irq) from [<c05c6774>] (gic_handle_irq+0x5c/0xb8)
[104369.423324] [<c05c6774>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90)
[104369.431910] Exception stack(0xc0c01ee0 to 0xc0c01f28)
[104369.439303] 1ee0: 00000000 00005eec 1ce52000 dd991a00 dcc2d400 00000000 dd990df0 00005eec
[104369.444430] 1f00: 00005eec 00000000 524739a0 5244a280 00000015 c0c01f30 c0716b90 c0716b94
[104369.452661] 1f20: 20000013 ffffffff
[104369.460907] [<c0301a8c>] (__irq_svc) from [<c0716b94>] (cpuidle_enter_state+0x94/0x498)
[104369.464643] [<c0716b94>] (cpuidle_enter_state) from [<c0716fdc>] (cpuidle_enter+0x30/0x4c)
[104369.472716] [<c0716fdc>] (cpuidle_enter) from [<c034a7ec>] (do_idle+0x1d8/0x240)
[104369.480787] [<c034a7ec>] (do_idle) from [<c034aafc>] (cpu_startup_entry+0x1c/0x20)
[104369.488425] [<c034aafc>] (cpu_startup_entry) from [<c0b00e58>] (start_kernel+0x4d8/0x4e8)
[104369.495990] ---[ end trace 713bf4bd85eb5631 ]---
26.06.20203203Base systemBug ReportVery LowMediumRaspberry Pie 4b does not run AP mode outside of 5G 36 ...TrunkUnconfirmed Task Description

Raspberry Pie 4b does not run AP mode outside of 5G 36 channel 40MHz.
For example, 5G 36 channel 80MHz or 5G 161 channel 40MHz or some other configuration. Parameters, including 2.4G
The version tested was Development Snapshot builds at Fri. Jun 26 00:13:28 2020

The error logs are as follows.

Fri Jun 26 20:54:58 2020 daemon.notice netifd: radio0 (12435): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 3406 path ()
Fri Jun 26 20:54:58 2020 kern.info kernel: [ 2780.006305] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Jun 26 20:55:09 2020 daemon.notice netifd: radio0 (12737): command failed: No error information (-524)
Fri Jun 26 20:55:09 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Fri Jun 26 20:55:09 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Fri Jun 26 20:55:09 2020 daemon.notice netifd: radio0 (12737): command failed: Not supported (-95)
Fri Jun 26 20:55:09 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Fri Jun 26 20:55:09 2020 daemon.notice netifd: radio0 (12737): command failed: I/O error (-5)
Fri Jun 26 20:55:09 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Fri Jun 26 20:55:09 2020 daemon.notice netifd: radio0 (12737): command failed: Too many open files in system (-23)
Fri Jun 26 20:55:09 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Fri Jun 26 20:55:09 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Fri Jun 26 20:55:09 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Jun 26 20:55:09 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->HT_SCAN
Fri Jun 26 20:55:09 2020 kern.info kernel: [ 2790.712541] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Jun 26 20:55:09 2020 kern.err kernel: [ 2790.721789] ieee80211 phy0: brcmf_run_escan: error (-52)
Fri Jun 26 20:55:09 2020 kern.err kernel: [ 2790.727105] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52)
Fri Jun 26 20:55:09 2020 kern.err kernel: [ 2790.734391] ieee80211 phy0: brcmf_run_escan: error (-52)
Fri Jun 26 20:55:09 2020 daemon.err hostapd: Failed to request a scan of neighboring BSSes ret=-52 (No error information)
Fri Jun 26 20:55:09 2020 daemon.notice hostapd: wlan0: interface state HT_SCAN->DISABLED
Fri Jun 26 20:55:09 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Fri Jun 26 20:55:09 2020 daemon.err hostapd: wlan0: Unable to setup interface.
Fri Jun 26 20:55:09 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Fri Jun 26 20:55:09 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Fri Jun 26 20:55:09 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Fri Jun 26 20:55:09 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Fri Jun 26 20:55:09 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Fri Jun 26 20:55:09 2020 kern.err kernel: [ 2790.739777] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52)
Fri Jun 26 20:55:10 2020 daemon.notice netifd: radio0 (12737): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 3406 path ()
Fri Jun 26 20:55:10 2020 daemon.notice netifd: radio0 (12737): Device setup failed: HOSTAPD_START_FAILED
Fri Jun 26 20:55:17 2020 authpriv.info dropbear[12806]: Child connection from 192.168.0.109:62432
Fri Jun 26 20:55:17 2020 authpriv.notice dropbear[12806]: Pubkey auth succeeded for 'root' with key sha1!! 40:5b:9e:0b:85:60:d0:0e:aa:bc:2c:4b:04:e5:26:e0:52:dd:7e:39 from 192.168.0.109:62432
Fri Jun 26 20:55:20 2020 daemon.notice netifd: radio0 (12815): command failed: No error information (-524)
Fri Jun 26 20:55:20 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Fri Jun 26 20:55:20 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Fri Jun 26 20:55:20 2020 daemon.notice netifd: radio0 (12815): command failed: Not supported (-95)
Fri Jun 26 20:55:20 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Fri Jun 26 20:55:20 2020 daemon.notice netifd: radio0 (12815): command failed: I/O error (-5)
Fri Jun 26 20:55:20 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Fri Jun 26 20:55:20 2020 daemon.notice netifd: radio0 (12815): command failed: Too many open files in system (-23)
Fri Jun 26 20:55:20 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Fri Jun 26 20:55:20 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Fri Jun 26 20:55:20 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Jun 26 20:55:20 2020 kern.info kernel: [ 2801.549158] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Jun 26 20:55:20 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->HT_SCAN
Fri Jun 26 20:55:20 2020 kern.err kernel: [ 2801.558554] ieee80211 phy0: brcmf_run_escan: error (-52)
Fri Jun 26 20:55:20 2020 kern.err kernel: [ 2801.563874] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52)
Fri Jun 26 20:55:20 2020 kern.err kernel: [ 2801.570976] ieee80211 phy0: brcmf_run_escan: error (-52)
Fri Jun 26 20:55:20 2020 kern.err kernel: [ 2801.576291] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52)
Fri Jun 26 20:55:20 2020 daemon.err hostapd: Failed to request a scan of neighboring BSSes ret=-52 (No error information)
Fri Jun 26 20:55:20 2020 daemon.notice hostapd: wlan0: interface state HT_SCAN->DISABLED
Fri Jun 26 20:55:20 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Fri Jun 26 20:55:20 2020 daemon.err hostapd: wlan0: Unable to setup interface.
Fri Jun 26 20:55:20 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Fri Jun 26 20:55:20 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Fri Jun 26 20:55:20 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Fri Jun 26 20:55:20 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Fri Jun 26 20:55:20 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Fri Jun 26 20:55:20 2020 daemon.notice netifd: radio0 (12815): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 3406 path ()
Fri Jun 26 20:55:20 2020 daemon.notice netifd: radio0 (12815): Device setup failed: HOSTAPD_START_FAILED
25.06.20203202PackagesBug ReportVery LowLowlibnl_tiny: struct np_sock may be affected by Y2038 Pro...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

libnl_tiny stores time() value to sk→s_seq_expect and sk→s_seq_next (struct np_sock sk) in socket.c.
Struct members s_seq_expect and s_seq_next are both unsigned integer values, which I believe is to
overcome Y2038 Problem. Looking at git blame, this particular design choice has been made over 10 years ago.

Since many libraries and OS including gLibc and linux have already redefined time_t to signed 64 bit,
I think it is safe to redefine the members to uint64_t.

23.06.20203200KernelBug ReportVery LowLowSoftware flowoffload doesn't work with marked packetsopenwrt-19.07Unconfirmed Task Description

Software offload doesn’t work when custom routing table used:
How to examine:

# create ipset
ipset create IPNET hash:net
ipset add IPNET 139.59.209.225/32
# check ipset
ipset list IPNET
...
Number of entries: 1
Members:
139.59.209.225

# mark packets with dst to IPNET
iptables -t mangle -A PREROUTING -i br-lan -m set –match-set IPNET dst -j MARK –set-mark 0×1111 iptables -t mangle -A OUTPUT -m set –match-set IPNET dst -j MARK –set-mark 0×1111

# add custom routing table for marked packets
ip ru add fwmark 0×1111 lookup 8888 prio 10000

# add route for custom table 8888
ip route add default via 192.168.30.1 table 8888

# enable flow offload in /etc/config/firewall
config defaults

....
option flow_offloading '1'

/etc/init.d/firewall reload

check iptables:
Chain FORWARD (policy DROP 0 packets, 0 bytes)

  pkts      bytes target     prot opt in     out     source               destination         
    24     1947 forwarding_rule  all  --  any    any     anywhere             anywhere             /* !fw3: Custom forwarding rule chain */
    22     1819 FLOWOFFLOAD  all  --  any    any     anywhere             anywhere             /* !fw3: Traffic offloading */ ctstate RELATED,ESTABLISHED FLOWOFFLOAD
    22     1819 ACCEPT     all  --  any    any     anywhere             anywhere             ctstate RELATED,ESTABLISHED /* !fw3 */
     2      128 zone_lan_forward  all  --  br-lan any     anywhere             anywhere             /* !fw3 */
     0        0 zone_wan_forward  all  --  pppoe-wan any     anywhere             anywhere             /* !fw3 */
     0        0 zone_wan_forward  all  --  l2tpv3-hetzner any     anywhere             anywhere             /* !fw3 */
     0        0 zone_wan_forward  all  --  wg0    any     anywhere             anywhere             /* !fw3 */
     0        0 reject     all  --  any    any     anywhere             anywhere             /* !fw3 */


But packets with RELATED,ESTABLISHED don’t use custom routing (it seems what flowoffload don’t remember custom routing and try to send packets on table main). When I add manually custom route to main table - flow offload work again

22.06.20203199Base systemBug ReportVery LowLowOutbound SSH failure with dropbear from lantiq (BT HH5a...TrunkUnconfirmed Task Description

About 4 times out of 5 I cannot establish an outbound SSH connection with dropbear.

# ssh zeniv.linux.org.uk

ssh: Connection to root@zeniv.linux.org.uk:22 exited: Bad buf_getbyte

Precisely the same binary running on my wndr3800 works OK.

22.06.20203198Base systemBug ReportVery LowLowLuci Ddns setup error with DuckdnsTrunkUnconfirmed Task Description

I can’t get Duckdns working with the Luci Ddns GUI. Error:

011531 WARN : Service section ‘DuckDNS’ not defined - TERMINATE
011531 WARN : PID ‘22615’ exit WITH ERROR ‘1’ at 2020-06-22 01:15

22.06.20203197Base systemBug ReportVery LowLowDdns service text description errorTrunkUnconfirmed Task Description

In Luci it says:

Domain
Replaces [USERNAME] in Update-URL (URL-encoded)

And:

Username
Replaces [USERNAME] in Update-URL (URL-encoded)

21.06.20203196Base systemBug ReportVery LowLowOpenWRT on Freescale's P2020RDBopenwrt-19.07Unconfirmed Task Description

I’m trying to run OpenWRT on a P2020RDB board, I managed to fetch the release mpc85xx initramfs.bin from here (I failed to get the snapshot one for Freescale over here as I received a 403 error), and then I pulled it into uboot using tftpboot, and placed it at address “0×1000000“, and ran “bootm 0×1000000” the kernel starts and then I get a call trace and some stuff get dumped:

XTM-330_P2020(FAILSAFE) => bootm 0x1000000                                                                                                                      [165/195]
WARNING: adjusting available memory to 30000000                                                                                                                          
## Booting kernel from FIT Image at 01000000 ...                                                                                                                         
   Using 'config@1' configuration                                                                                                                                        
   Trying 'kernel@1' kernel subimage                                                                                                                                     
     Description:  POWERPC OpenWrt Linux-4.14.180                                                                                                                        
     Type:         Kernel Image                                                                                                                                          
     Compression:  gzip compressed                                                                                                                                       
     Data Start:   0x010000ec                                                                                                                                            
     Data Size:    5128735 Bytes = 4.9 MiB                                                                                                                               
     Architecture: PowerPC                                                                                                                                               
     OS:           Linux                                                                                                                                                 
     Load Address: 0x00000000
     Entry Point:  0x00000000
     Hash algo:    crc32
     Hash value:   7754597c
     Hash algo:    sha1
     Hash value:   bd433c824dc74e015b759f3ab53ffe996b130f2e
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 01000000
   Using 'config@1' configuration
   Trying 'fdt@1' FDT blob subimage
     Description:  POWERPC OpenWrt p2020rdb device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x014e4448
     Data Size:    12550 Bytes = 12.3 KiB
     Architecture: PowerPC
     Hash algo:    crc32
     Hash value:   0d1ae91a
     Hash algo:    sha1
     Hash value:   fdbac0f412982769bdef3ba414fc6716b8a855d4
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x14e4448 
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 00ff9000, end 00fff105 ... OK
[    0.000000] Memory CAM mapping: 256/256/256 Mb, residual: 256Mb
[    0.000000] Linux version 4.14.180 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 SMP Sat May 16 18:32:20 2020
[    0.000000] Using P2020 RDB machine description
[    0.000000] bootconsole [udbg0] enabled
[    0.000000] CPU maps initialized for 1 thread per core
[    0.000000] -----------------------------------------------------
[    0.000000] phys_mem_size     = 0x30000000
[    0.000000] dcache_bsize      = 0x20
[    0.000000] icache_bsize      = 0x20
[    0.000000] cpu_features      = 0x0000000012100460
[    0.000000]   possible        = 0x0000000012120460
[    0.000000]   always          = 0x0000000000100000
[    0.000000] cpu_user_features = 0x84e08000 0x08000000
[    0.000000] mmu_features      = 0x00020010
[    0.000000] -----------------------------------------------------
mpc85xx_rdb_setup_arch()
[    0.000000] mpc85xx_qe_init: Could not find Quicc Engine node
[    0.000000] MPC85xx RDB board from Freescale Semiconductor
[    0.000000] barrier-nospec: using isync; sync as speculation barrier
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[    0.000000] percpu: Embedded 12 pages/cpu s18380 r8192 d22580 u49152
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 195072
[    0.000000] Kernel command line: root=/dev/sda1 rw rootdelay=30 console=ttyS0,115200 ramdisk_size=600000
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 705444K/786432K available (4400K kernel code, 176K rwdata, 548K rodata, 2620K init, 216K bss, 80988K reserved, 0K cma-reserved)
[    0.000000] Kernel virtual memory layout:
[    0.000000]   * 0xfffdf000..0xfffff000  : fixmap
[    0.000000]   * 0xfdffe000..0xfe000000  : early ioremap
[    0.000000]   * 0xf1000000..0xfdffe000  : vmalloc & ioremap
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[    0.000000] mpic: Setting up MPIC " OpenPIC  " version 1.2 at ffe40000, max 2 CPUs
[    0.000000] mpic: ISU size: 256, shift: 8, mask: ff
[    0.000000] mpic: Initializing for 256 sources
[    0.000000] mpc85xx_rdb_pic_init: Could not find qe-ic node
[    0.000010] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns
[    0.010162] clocksource: timebase mult[f000003] shift[24] registered
[    0.016543] pid_max: default: 32768 minimum: 301
[    0.021182] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.027710] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.035198] mpic: requesting IPIs...
[    0.039003] Hierarchical SRCU implementation.
[    0.043596] smp: Bringing up secondary CPUs ...
[    0.048509] smp: Brought up 1 node, 2 CPUs
[    0.052518] Using shared cache scheduler topology
[    0.058928] random: get_random_u32 called from 0xc0201c80 with crng_init=0
[    0.065843] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.075502] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.081889] NET: Registered protocol family 16
[    0.094212] Found FSL PCI host bridge at 0x00000000ffe0a000. Firmware bus number: 0->0
[    0.102052] PCI host bridge /pcie@ffe0a000 (primary) ranges:
[    0.107677]  MEM 0x0000000080000000..0x000000009fffffff -> 0x0000000080000000 
[    0.114869]   IO 0x00000000ffc00000..0x00000000ffc0ffff -> 0x0000000000000000
[    0.121993] /pcie@ffe0a000: PCICSRBAR @ 0xfff00000
[    0.126746] setup_pci_atmu: end of DRAM 30000000
[    0.131344] /pcie@ffe0a000: Setting PCI inbound window greater than memory size
[    0.146042] PCI: Probing PCI hardware
[    0.149766] fsl-pci ffe0a000.pcie: PCI host bridge to bus a000:00
[    0.155778] pci_bus a000:00: root bus resource [io  0x0000-0xffff]
[    0.161927] pci_bus a000:00: root bus resource [mem 0x80000000-0x9fffffff]
[    0.168774] pci_bus a000:00: root bus resource [bus 00-ff]
[    0.174535] pci a000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.182529] pci a000:00:00.0: PCI bridge to [bus 01-ff]
[    0.187722] PCI: Cannot allocate resource region 0 of device a000:00:00.0, will remap
[    0.195494] pci a000:00:00.0: BAR 0: no space for [mem size 0x00100000]
[    0.202057] pci a000:00:00.0: BAR 0: failed to assign [mem size 0x00100000]
[    0.208993] pci a000:00:00.0: PCI bridge to [bus 01]
[    0.213933] pci a000:00:00.0:   bridge window [io  0x0000-0xffff]
[    0.220002] pci a000:00:00.0:   bridge window [mem 0x80000000-0x9fffffff]
[    0.226764] pci_bus a000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.235925] /soc@ffe00000/timer@41100: cannot get timer frequency.
[    0.242059] /soc@ffe00000/timer@42100: cannot get timer frequency.
[    0.254462] clocksource: Switched to clocksource timebase
[    0.260493] NET: Registered protocol family 2
[    0.265162] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.272178] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.278670] TCP: Hash tables configured (established 8192 bind 8192)
[    0.285022] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.290884] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.297300] NET: Registered protocol family 1
[    2.607509] Crashlog allocated RAM at address 0x3f00000
[    2.612901] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[    2.622935] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.628700] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.639761] io scheduler noop registered
[    2.643605] io scheduler deadline registered (default)
[    2.649567] pcieport a000:00:00.0: enabling device (0106 -> 0107)
[    2.655875] pcieport a000:00:00.0: AER enabled with IRQ 24
[    2.661445] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
rserial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42, base_baud = 33333333) is a 16550A
[    2.681148] console [ttyS0] enabled
[    2.681148] console [ttyS0] enabled
[    2.688069] bootconsole [udbg0] disabled
[    2.688069] bootconsole [udbg0] disabled
[    2.696040] serial8250.0: ttyS1 at MMIO 0xffe04600 (irq = 42, base_baud = 33333333) is a 16550A
[    2.705190] console [ttyS0] disabled
[    2.708811] console [ttyS0] enabled
[    2.712565] ffe04600.serial: ttyS1 at MMIO 0xffe04600 (irq = 42, base_baud = 33333333) is a 16550
[    2.722481] Disabling lock debugging due to kernel taint
[    2.722487] fsl-lbc ffe05000.localbus: Chip select error: LTESR 0x00080000
[    2.734643] Machine check in kernel mode.
[    2.738637] Caused by (from MCSR=10008): 
[    2.738640] Bus - Read Data Bus Error
[    2.746282] Oops: Machine check, sig: 7 [#1]
[    2.750535] BE SMP NR_CPUS=2 P2020 RDB
[    2.754272] Modules linked in:
[    2.757319] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G   M            4.14.180 #0
[    2.764610] task: ef448000 task.stack: ef450000
[    2.769125] NIP:  c02995d0 LR: c028f240 CTR: c02995b0
[    2.774161] REGS: effe3f10 TRAP: 0204   Tainted: G   M             (4.14.180)
[    2.781276] MSR:  00029000 <CE,EE,ME>  CR: 24000282  XER: 00000000
[    2.787449] DEAR: f1200000 ESR: 00800000 
[    2.787449] GPR00: c028f524 ef451c20 ef448000 ef451c34 ef49c91c 00000020 ef451cc8 ef451cc8 
[    2.787449] GPR08: 00000002 00000002 f1200000 00000002 24000282 00000000 c049ae20 c049a00c 
[    2.787449] GPR16: c049ad84 c049adc0 c049add8 ef48f158 00000000 c049ad50 ef49c910 01000000 
[    2.787449] GPR24: c049a000 00000000 00000000 00000000 00000000 00000022 00000002 ef49c91c 
[    2.824804] Call Trace:
[    2.827240] [ef451c20] [ef451cd0] 0xef451cd0 (unreliable)
[    2.832625] [ef451c60] [c028f524] 0xc028f524
[    2.836882] [ef451c80] [c028e3dc] 0xc028e3dc
[    2.841138] [ef451cc0] [c02991a8] 0xc02991a8
[    2.845394] [ef451d40] [c028e2b8] 0xc028e2b8
[    2.849651] [ef451d60] [c029993c] 0xc029993c
[    2.853907] [ef451de0] [c0273138] 0xc0273138
[    2.858164] [ef451df0] [c02715b8] 0xc02715b8
[    2.862420] [ef451e20] [c02717f4] 0xc02717f4
[    2.866676] [ef451e40] [c026f634] 0xc026f634
[    2.870933] [ef451e70] [c0270a88] 0xc0270a88
[    2.875189] [ef451e90] [c0272158] 0xc0272158
[    2.879446] [ef451ea0] [c0003140] 0xc0003140
[    2.883702] [ef451f00] [c04d8b40] 0xc04d8b40
[    2.887959] [ef451f30] [c00032d0] 0xc00032d0
[    2.892215] [ef451f40] [c00103b0] 0xc00103b0
[    2.896470] Instruction dump:
[    2.899427] 48000008 0fe00000 7c0004ac 4e800020 81240018 8144000c 2f890001 40be000c 
[    2.907163] 7d2a28ae 48000028 2f890002 40be000c <7d2a2a2e> 48000018 2f890004 409e000c 
[    2.915079] ---[ end trace c9ea2fa8a0ac4ace ]---
[    2.920341] 
[    3.911837] Kernel panic - not syncing: Fatal exception
[    3.917450] Rebooting in 1 seconds..

Is there something wrong I’m doing? Or is this a bug upstream?

20.06.20203195Base systemBug ReportVery LowHighramips/mt7621/zbt3526 -> boot failure with kernel 5.4TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: ZBT 3526-16MB + 32 MB - Software versions of OpenWrt/LEDE: current trunk (kernel 5.4)
- Steps to reproduce: when i update the firmware, i see that there is a network after reboot for ~10sec, and then it is gone, and is not accessable, seeems to be, that something is crashing.
i can only hard-reset - nothing else.

any idea ?
maybe it is related also like the other bugs reported ? for bootloop or hanging/crashing mt7621 ?

 


20.06.20203194KernelBug ReportVery LowLowKernel option needed for Atheros AR9565 mini-pcie compa...openwrt-19.07Unconfirmed Task Description

I have an x86_64 system with an Atheros AR9565 mini-pcie which is not recognized by Openwrt unless I recompile with the following options:
CONFIG_PACKAGE_kmod-ath9k=y
CONFIG_ATH9K_SUPPORT_PCOEM=y

I’m using Openwrt 19.07.3. In the prebuilt images I believe kmod-ath9k is being compiled with CONFIG_ATH9K_SUPPORT_PCOEM defaulting to =n. Is it possible to get this changed to CONFIG_ATH9K_SUPPORT_PCOEM=y in future prebuilt releases?

Thanks!

20.06.20203193PackagesBuild FailureVery LowLowofficial bird2 build on ipq806x doesn't start and has b...openwrt-19.07Unconfirmed Task Description

Hi all,

I am running bird2 on Netgear R7800 for OSPF routing but it doesn’t start. Following are error messages I got:

# bird -c /etc/bird.conf -d
Bus error

# logread
Sat Jun 20 12:24:09 2020 daemon.info bird: Started
Sat Jun 20 12:24:09 2020 kern.err kernel: [572809.062848] Alignment trap: not handling instruction f44c0a1f at [<0006bb88>]
Sat Jun 20 12:24:09 2020 kern.alert kernel: [572809.062907] Unhandled fault: alignment exception (0x801) at 0x017c9634
Sat Jun 20 12:24:09 2020 kern.alert kernel: [572809.069111] pgd = d7668000
Sat Jun 20 12:24:09 2020 kern.alert kernel: [572809.075597] [017c9634] *pgd=5c0c6835, *pte=5ad3475f, *ppte=5ad34c7f


# dmesg
[571421.877597] Alignment trap: not handling instruction f44c0a1f at [<0006bb88>]
[571421.877645] Unhandled fault: alignment exception (0x801) at 0x0111b624
[571421.883832] pgd = dc258000
[571421.890385] [0111b624] *pgd=5e63a835, *pte=5c72975f, *ppte=5c729c7f

Environment
- OpenWrt 19.07.3, r11063-85e04e9f46
- bird2 - 2.0.7-2
- target ipq806x
- model Netgear R7800

# /etc/bird.conf
log syslog all;
router id 192.168.1.1;                                                                                                                                        
protocol device {                                                                                                                                       
}                                                                                                                                                       
protocol bfd {                                                                                                                                          
}                                                                                                                                                       
protocol direct {                                                                                                                                      
        interface "br-lan";                                                                                                                             
        ipv4;                   # Connect to default IPv4 table                                                                                         
        ipv6;                   # ... and to default IPv6 table                                                                                         
}                                                                                                                                                       
                                                                                                                                                        
# The Kernel protocol is not a real routing protocol. Instead of communicating                                                                          
# with other routers in the network, it performs synchronization of BIRD                                                                                
# routing tables with the OS kernel. One instance per table.                                                                                            
protocol kernel {                                                                                                                                       
        scan time 10;                                                                                                                                   
        merge paths;                                                                                                                                    
        ipv4 {                  # Connect protocol to IPv4 table by channel                                                                             
#             table master4;    # Default IPv4 table is master4                                                                                         
#             import all;       # Import to table, default is import all                                                                                
              export all;       # Export to protocol. default is export none                                                                            
        };                                                                                                                                              
#       learn;                  # Learn alien routes from the kernel                                                                                    
#       kernel table 10;        # Kernel table to synchronize with (default: main)                                                                      
}                                                                                                                                                       
                                                                                                                                                        
# Another instance for IPv6, skipping default options                                                                                                   
protocol kernel {                                                                                                                                       
        scan time 10;                                                                                                                                   
        merge paths;                                                                                                                                    
        ipv6 { export all; };                                                                                                                           
}                                                                                                                                                       
                                                                                                                                                        
# OSPF example, both OSPFv2 and OSPFv3 are supported                                                                                                    
protocol ospf v2 ospf4 {                                                                                                                                
        ipv4 {                                                                                                                                          
        };                                                                                                                                              
        area 0 {                                                                                                                                        
                interface "br-lan" {bfd;};                                                                                                              
        };                                                                                                                                              
}

This issue can be reproduced with the latest OpenWrt release 19.07.3, but it has been there for a long time.
A custom build of bird2 package with OpenWRT SDK doesn’t have this issue.

I am not sure this is the right place to report this issue. Could anyone help with this?

18.06.20203191PackagesBug ReportVery LowHighL2TP 19.07.3 interface is not showingopenwrt-19.07Unconfirmed Task Description

- Device problem occurs on

Tested on both

TP-Link TL-WDR3600 v1 ath79
MikroTik RB750r2 ar71xx

- Software versions of OpenWrt/LEDE release, packages, etc.

Tried to install the following packages;

kmod-l2tp
kmod-l2tp-eth
kmod-l2tp-ip
kmod-pppol2tp
xl2tpd
luci-proto-ppp

- Steps to reproduce

when trying to add a new interface is not there nor dos it not show.

Im not trying to setup a VPN as my ISP UK AAISP is offering this service https://www.aa.net.uk/broadband/l2tp-service

18.06.20203190KernelBug ReportVery LowHighKernel Oops and reboot on ipq806x (EA8500): msm_read_ti...TrunkUnconfirmed Task Description

This happened on OpenWrt SNAPSHOT r13520-68b94f0fb4, but it’s pretty random. I haven’t been able to figure out what causes it. It usually happens at least once within a week. I’m not sure why there’s no call stack here, I also tried `cat /sys/kernel/debug/crashlog` a few hours after it happened and got a “No such file or directory”.

# uname -a
Linux EA8500S 5.4.43 #0 SMP Mon Jun 8 19:16:17 2020 armv7l GNU/Linux


[333045.256692] 8<--- cut here ---
[333045.256733] Unable to handle kernel NULL pointer dereference at virtual address 0000000a
[333045.258656] pgd = 8948efb0
[333045.267139] [0000000a] *pgd=00000000
[333045.269709] Internal error: Oops: 5 [#1] SMP ARM
[333045.273404] Modules linked in: nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet ath10k_pci ath10k_core ath nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_ct nft_counter nf_tables_set nf_tables nf_conntrack_netlink mac80211 iptable_nat ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_policy xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_MASQUERADE xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY ts_fsm ts_bm nfnetlink nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_rtsp nf_nat_pptp nf_nat_irc nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtsp nf_conntrack_rtcache
[333045.273734]  nf_conntrack_pptp nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conncount iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables compat asn1_decoder fuse act_connmark nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport ledtrig_heartbeat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel ipcomp esp4 ah4 tunnel6 tunnel4 tun xfrm_user xfrm_ipcomp af_key xfrm_algo vfat fat ntfs nls_utf8 nls_iso8859_1 nls_cp437 sha1_generic md5 echainiv des_generic libdes cbc authenc usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom ohci_platform ohci_hcd phy_qcom_dwc3 ahci fsl_mph_dr_of ehci_platform ehci_fsl sd_mod ahci_platform libahci_platform libahci libata scsi_mod
[333045.343201]  ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 exfat(C) crc32c_generic
[333045.452936] CPU: 0 PID: 10391 Comm: kworker/0:2 Tainted: G         C        5.4.43 #0
[333045.460735] Hardware name: Generic DT based system
[333045.468481] Workqueue: events dbs_work_handler
[333045.473245] PC is at msm_read_timer_count+0xc/0x18
[333045.477746] LR is at msm_read_current_timer+0x1c/0x28
[333045.482608] pc : [<c0733ea8>]    lr : [<c0733ee4>]    psr: a0000013
[333045.487814] sp : da0f1dc0  ip : 00000000  fp : dce52880
[333045.494327] r10: ddb8d010  r9 : dd648b40  r8 : 16e36000
[333045.499619] r7 : dd511240  r6 : 00000006  r5 : 00000001  r4 : c0c68ea0
[333045.504919] r3 : 00000006  r2 : 1fffa6f0  r1 : 20000013  r0 : c0c28428
[333045.511261] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
17.06.20203189Base systemBug ReportVery LowMediumWAN interface does not reconnect a lost PPPoE linkTrunkUnconfirmed Task Description

Hi,

- Device problem occurs on: TP-Link Archer C7 v5
- Software versions of OpenWrt: SNAPSHOT r13565-373f446049 / LuCI Master git-20.165.17827-7b30b88
- Steps to reproduce: remove the WAN cable(or bring down the link from the ISP router), wait , reconnect the WAN cable(or bring up the link in the ISP router), the OpenWrt router still has the old ppp IP because the ppp link is not negotiated again.

[OpenWrt router] ←-(PPPoE link)–> [ISP router] ←-(fiber link)–> [Inet]

Thanks.

16.06.20203188Base systemBug ReportVery LowMediumNo ethernet/wifi ports available after upgrade to trunkTrunkUnconfirmed Task Description

Device: Zyxel P2812-F1
Software version: Trunk r13335-586661018e

Steps to reproduce:

1: use a working .config from 19.07 (also tried a diffconfig and make defconfig)
2: compile the trunk version
3: upload to the router
4: no ports are available, dmesg reports

[    0.658577] pinctrl-xway 1e100b10.pinmux: pin io5 already requested by 1e100bb0.stp; cannot claim for 1e108000.eth
[    0.667566] pinctrl-xway 1e100b10.pinmux: pin-5 (1e108000.eth) status -22
[    0.685238] lantiq,xrx200-net 1e108000.eth: Error applying setting, reverse things back
[    0.693270] lantiq,xrx200-net: probe of 1e108000.eth failed with error -22

See also attached .config

Thanks
Willem

15.06.20203187Base systemBug ReportVery LowLowLinkSys 1900ACS - WLAN 5GHz - 802.11AC with 802.11N at...openwrt-19.07Unconfirmed Task Description

I was upgraded to my LinkSys WRT-1900ACS from LEDE 17.01.6 to OpenWRT 19.07.3.

With LEDE 17.01.6 I can set up 5GHz WLAN to use N and AC at the same time with two different SSID and with this setup some old devices can connect to this 5GHz WLAN with 802.11n correctly while my notebook can connect to 802.11AC on 5GHz network too (I used two different SSID setup both setting used 5GHz network).

After I upgraded to OpenWrt I found there is no option to set up both 802.11N and 802.11AC with 5GHz at the same time and my old WiFi devices need to use 2.4GHz network only.

With the OpenWrt 19.07.3 the ‘require_mode’ option can set globally so need to decide to use AC or N only for all 5GHz SSID.

Is there any way to set 5GHz with both N and AC at the same time or there is no option by technical reason?

14.06.20203181Base systemBug ReportVery LowHighunable to build 19.07.3 for clearfog proopenwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
Clearfog pro

- Software versions of OpenWrt/LEDE release, packages, etc.
tag 19.07.3
- Steps to reproduce
make fails:

export CROSS="arm-openwrt-linux-muslgnueabi-"  NO_RENAME=1 ; NM="arm-openwrt-linux-muslgnueabi-nm" STRIP="/home/oli/openwrt/staging_dir/host/bin/sstrip" STRIP_KMOD="/home/oli/openwrt/scripts/strip-kmod.sh" PATCHELF="/home/oli/openwrt/staging_dir/host/bin/patchelf" /home/oli/openwrt/scripts/rstrip.sh /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools
rstrip.sh: /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools/usr/sbin/fw_printenv: executable
(cd /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools/CONTROL; ( echo "$CONTROL"; printf "Description: "; echo "$DESCRIPTION" | sed -e 's,^[[:space:]]*, ,g'; ) > control; chmod 644 control; ( echo "#!/bin/sh"; echo "[ \"\${IPKG_NO_SCRIPT}\" = \"1\" ] && exit 0"; echo "[ -x "\${IPKG_INSTROOT}/lib/functions.sh" ] || exit 0"; echo ". \${IPKG_INSTROOT}/lib/functions.sh"; echo "default_postinst \$0 \$@"; ) > postinst; ( echo "#!/bin/sh"; echo "[ -x "\${IPKG_INSTROOT}/lib/functions.sh" ] || exit 0"; echo ". \${IPKG_INSTROOT}/lib/functions.sh"; echo "default_prerm \$0 \$@"; ) > prerm; chmod 0755 postinst prerm; echo "$V_Package_uboot_envtools_conffiles" > conffiles;  )
install -d -m0755 /home/oli/openwrt/bin/targets/mvebu/cortexa9/packages
/home/oli/openwrt/scripts/ipkg-build -c -o 0 -g 0 /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools /home/oli/openwrt/bin/targets/mvebu/cortexa9/packages
/home/oli/openwrt/staging_dir/host/bin/find: '/home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools/etc/config/ubootenv': No such file or directory
/home/oli/openwrt/staging_dir/host/bin/find: '/home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools/etc/fw_env.config': No such file or directory
Packaged contents of /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools into /home/oli/openwrt/bin/targets/mvebu/cortexa9/packages/uboot-envtools_2018.03-3_arm_cortex-a9_vfpv3-d16.ipk
echo "uboot-envtools" >> /home/oli/openwrt/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/pkginfo/uboot-envtools.default.install
make[3]: Leaving directory '/home/oli/openwrt/package/boot/uboot-envtools'
time: package/boot/uboot-envtools/compile#1.27#0.68#1.71
make[3]: Entering directory '/home/oli/openwrt/package/boot/uboot-mvebu'
rm -f /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-clearfog/u-boot-2018.03/.built
touch /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-clearfog/u-boot-2018.03/.built_check
make  -C /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-clearfog/u-boot-2018.03 CROSS_COMPILE=arm-openwrt-linux-muslgnueabi- DTC="/home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/linux-mvebu_cortexa9/linux-4.14.180/scripts/dtc/dtc" HOSTCC="gcc" HOSTCFLAGS="-O2 -I/home/oli/openwrt/staging_dir/host/include -I/home/oli/openwrt/staging_dir/hostpkg/include -I/home/oli/openwrt/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/host/include -I/home/oli/openwrt/staging_dir/host/include -I/home/oli/openwrt/staging_dir/hostpkg/include -I/home/oli/openwrt/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/host/include -std=gnu11" HOSTLDFLAGS="-L/home/oli/openwrt/staging_dir/host/lib -L/home/oli/openwrt/staging_dir/hostpkg/lib -L/home/oli/openwrt/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/host/lib"
make[4]: Entering directory '/home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-clearfog/u-boot-2018.03'
  CHK     include/config/uboot.release
  CHK     include/generated/version_autogenerated.h
  CHK     include/generated/timestamp_autogenerated.h
  CC      lib/asm-offsets.s
  CHK     include/generated/generic-asm-offsets.h
  UPD     include/generated/generic-asm-offsets.h
  CC      arch/arm/lib/asm-offsets.s
  CHK     include/generated/asm-offsets.h
  UPD     include/generated/asm-offsets.h
  HOSTLD  scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
make[6]: *** [scripts/Makefile.host:108: scripts/dtc/dtc] Error 1
make[5]: *** [scripts/Makefile.build:425: scripts/dtc] Error 2
make[4]: *** [Makefile:491: scripts] Error 2
make[4]: Leaving directory '/home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-clearfog/u-boot-2018.03'
make[3]: *** [Makefile:53: /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-clearfog/u-boot-2018.03/.built] Error 2
make[3]: Leaving directory '/home/oli/openwrt/package/boot/uboot-mvebu'
time: package/boot/uboot-mvebu/clearfog/compile#0.32#0.20#0.51
make[2]: *** [package/Makefile:113: package/boot/uboot-mvebu/compile] Error 2
make[2]: Leaving directory '/home/oli/openwrt'
make[1]: *** [package/Makefile:107: /home/oli/openwrt/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/oli/openwrt'
make: *** [/home/oli/openwrt/include/toplevel.mk:227: world] Fehler 2
Showing tasks 1 - 50 of 1086 Page 1 of 221 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing