OpenWrt/LEDE Project

Welcome to the OpenWrt/LEDE Project bug reporting and issue tracking system

Problems to be reported here are for the OpenWrt/LEDE Project targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt/LEDE Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to lede-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeveritySummaryReported InStatus
04.02.2017 464 Base systemBug ReportVery HighHigh Syslog dnsmasq errors, where dnsmasq thinks it is runni ...TrunkClosed Task Description

For the past several weeks, while testing recent LEDE x86 trunk images in a VirtualBox 5.1 VM (which I’ve been doing for the past 2+ years), I’ve been noticing dnsmasq errors in syslog, where dnsmasq thinks it’s running as pid 1, logging errors like “daemon.crit dnsmasq[1]: failed to bind DHCP server socket: Address in use”.

Occasionally I notice that ujail dnsmasq will hang, as zombie process (flag Z in ps)

Relevant info I can think of (in addition to the CONFIG_PACKAGE_dnsmasq_full_noid=y in recent builds) is the fact that I’m using procd-ujail/seccomp (but I’ve been using procd-ujail/seccomp for a long time >1 yr).

BusyBox v1.25.1 () built-in shell (ash)

  Reboot (SNAPSHOT, r3186-9f7fc23)

root@LEDE:~# logread |fgrep dnsm
Sat Jan 28 20:12:10 2017 daemon.info dnsmasq[1]: started, version 2.76 cachesize 150
Sat Jan 28 20:12:10 2017 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP conntrack ipset no-auth no-DNSSEC no-ID loop-detect inotify
Sat Jan 28 20:12:10 2017 daemon.info dnsmasq[1]: DNS service limited to local subnets
Sat Jan 28 20:12:10 2017 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Jan 28 20:12:10 2017 daemon.info dnsmasq[1]: using local addresses only for domain lan
Sat Jan 28 20:12:10 2017 daemon.info dnsmasq[1]: reading /tmp/resolv.conf.auto
Sat Jan 28 20:12:10 2017 daemon.info dnsmasq[1]: using local addresses only for domain lan
Sat Jan 28 20:12:10 2017 daemon.info dnsmasq[1]: using nameserver 10.0.3.1#53
Sat Jan 28 20:12:10 2017 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Sat Jan 28 20:12:10 2017 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Sat Jan 28 20:12:10 2017 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Sat Jan 28 20:12:12 2017 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Sat Jan 28 20:12:12 2017 daemon.info dnsmasq[1]: started, version 2.76 cachesize 150
Sat Jan 28 20:12:12 2017 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP conntrack ipset no-auth no-DNSSEC no-ID loop-detect inotify
Sat Jan 28 20:12:12 2017 daemon.info dnsmasq[1]: DNS service limited to local subnets
Sat Jan 28 20:12:12 2017 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Jan 28 20:12:12 2017 daemon.info dnsmasq[1]: using local addresses only for domain lan
Sat Jan 28 20:12:12 2017 daemon.info dnsmasq[1]: reading /tmp/resolv.conf.auto
Sat Jan 28 20:12:12 2017 daemon.info dnsmasq[1]: using local addresses only for domain lan
Sat Jan 28 20:12:12 2017 daemon.info dnsmasq[1]: using nameserver 10.0.3.1#53
Sat Jan 28 20:12:12 2017 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Sat Jan 28 20:12:12 2017 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Sat Jan 28 20:12:12 2017 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Sat Jan 28 20:12:59 2017 daemon.crit dnsmasq[1]: failed to bind DHCP server socket: Address in use
Sat Jan 28 20:12:59 2017 daemon.crit dnsmasq[1]: FAILED to start up
Sat Jan 28 20:13:04 2017 daemon.crit dnsmasq[1]: failed to bind DHCP server socket: Address in use
Sat Jan 28 20:13:04 2017 daemon.crit dnsmasq[1]: FAILED to start up
Sat Jan 28 20:13:09 2017 daemon.crit dnsmasq[1]: failed to bind DHCP server socket: Address in use
Sat Jan 28 20:13:09 2017 daemon.crit dnsmasq[1]: FAILED to start up
Sat Jan 28 20:13:14 2017 daemon.crit dnsmasq[1]: failed to bind DHCP server socket: Address in use
Sat Jan 28 20:13:14 2017 daemon.crit dnsmasq[1]: FAILED to start up
Sat Jan 28 20:13:19 2017 daemon.crit dnsmasq[1]: failed to bind DHCP server socket: Address in use
Sat Jan 28 20:13:19 2017 daemon.crit dnsmasq[1]: FAILED to start up
Sat Jan 28 20:13:19 2017 daemon.info procd: Instance dnsmasq::cfg02411c s in a crash loop 6 crashes, 0 seconds since last crash
root@LEDE:~# ps
  PID USER       VSZ STAT COMMAND
    1 root      1024 S    /sbin/procd
    2 root         0 SW   [kthreadd]
    3 root         0 SW   [ksoftirqd/0]
    4 root         0 SW   [kworker/0:0]
    5 root         0 SW<  [kworker/0:0H]
    7 root         0 SW   [rcu_sched]
    8 root         0 SW   [rcu_bh]
    9 root         0 SW   [migration/0]
   10 root         0 SW<  [netns]
   11 root         0 SW<  [perf]
   12 root         0 SW   [kworker/u2:1]
   13 root         0 SW<  [writeback]
  318 root         0 SW<  [crypto]
  319 root         0 SW<  [bioset]
  321 root         0 SW<  [kblockd]
  384 root         0 SW<  [ata_sff]
  496 root         0 SW   [kworker/0:1]
  509 root         0 SW   [kswapd0]
  510 root         0 SW<  [vmstat]
  580 root         0 SW   [fsnotify_mark]
  597 root         0 SW<  [pencrypt]
  599 root         0 SW<  [pdecrypt]
  619 root         0 SW<  [acpi_thermal_pm]
  657 root         0 SW<  [bioset]
  660 root         0 SW<  [bioset]
  663 root         0 SW<  [bioset]
  666 root         0 SW<  [bioset]
  669 root         0 SW<  [bioset]
  672 root         0 SW<  [bioset]
  675 root         0 SW<  [bioset]
  678 root         0 SW<  [bioset]
  692 root         0 SW   [scsi_eh_0]
  693 root         0 SW<  [scsi_tmf_0]
  696 root         0 SW   [scsi_eh_1]
  707 root         0 SW<  [scsi_tmf_1]
  710 root         0 SW   [scsi_eh_2]
  711 root         0 SW<  [scsi_tmf_2]
  714 root         0 SW<  [kpsmoused]
  715 root         0 SW   [kworker/u2:3]
  769 root         0 SW<  [ipv6_addrconf]
  780 root         0 SW<  [deferwq]
  781 root         0 SW<  [bioset]
  785 root         0 SW<  [bioset]
  790 root         0 SW<  [kworker/0:1H]
  798 root         0 SW<  [ext4-rsv-conver]
 1057 root       776 S    /sbin/ubusd
 1075 root       968 S    /bin/ash --login
 1394 root         0 SW<  [cfg80211]
 1637 root       880 S    /sbin/logd -S 64
 1684 root      1172 S    /sbin/netifd
 1724 root       896 S    /usr/sbin/odhcpd
 1769 root       848 S    /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300
 1887 root       964 S    udhcpc -p /var/run/udhcpc-eth1.pid -s /lib/netifd/dhcp.script -f -t 0 -i eth1 -C -O 121
 1891 root       732 S    odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth1
 2145 root      1564 S    /usr/lib/ipsec/starter --daemon charon
 2147 root      4108 S    /usr/lib/ipsec/charon --use-syslog
 2292 root       968 S <  /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.lede.pool.ntp.org -p 1.lede.pool.ntp.org -p 2.lede.pool.ntp.org -p 3.lede.pool.ntp.org
 2506 root       968 S    {mwan3track} /bin/sh /usr/sbin/mwan3track wan eth1 2 1 2 5 3 8 208.67.220.220 208.67.222.222 8.8.8.8 8.8.4.4
 2707 dnsmasq   1024 S    /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg02411c -k -x /var/run/dnsmasq/dnsmasq.cfg02411c.pid
 3814 root       916 S    /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300
 3838 root       968 S    -ash
 3943 root       964 S    sleep 5
 3945 root       964 R    ps
root@LEDE:~# cat /var/etc/dnsmasq.conf.cfg02411c
# auto-generated config file from /etc/config/dhcp
conf-file=/etc/dnsmasq.conf
dhcp-authoritative
domain-needed
localise-queries
read-ethers
bogus-priv
expand-hosts
local-service
domain=lan
server=/lan/
dhcp-leasefile=/tmp/dhcp.leases
resolv-file=/tmp/resolv.conf.auto
stop-dns-rebind
rebind-localhost-ok
dhcp-broadcast=tag:needs-broadcast
addn-hosts=/tmp/hosts
conf-dir=/tmp/dnsmasq.d
user=dnsmasq
group=dnsmasq

dhcp-range=lan,192.168.1.100,192.168.1.249,255.255.255.0,12h
no-dhcp-interface=eth1

root@LEDE:~# cat /var/run/dnsmasq/dnsmasq.cfg02411c.pid
1
root@LEDE:~# ip ad li
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master br-lan state UP group default qlen 1000
    link/ether 08:00:27:3a:49:cc brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 08:00:27:9e:1f:f5 brd ff:ff:ff:ff:ff:ff
    inet 10.0.3.105/24 brd 10.0.3.255 scope global eth1
       valid_lft forever preferred_lft forever
    inet6 fe80::a00:27ff:fe9e:1ff5/64 scope link
       valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 08:00:27:ee:c9:3a brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 08:00:27:77:06:57 brd ff:ff:ff:ff:ff:ff
6: ifb0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 32
    link/ether a6:97:f6:34:f9:07 brd ff:ff:ff:ff:ff:ff
7: ifb1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 32
    link/ether 92:11:dc:f8:d0:a4 brd ff:ff:ff:ff:ff:ff
8: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1
    link/gre 0.0.0.0 brd 0.0.0.0
9: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
10: teql0: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 100
    link/void
13: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 08:00:27:3a:49:cc brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.1/24 brd 192.168.1.255 scope global br-lan
       valid_lft forever preferred_lft forever
    inet6 fd5a:d684:ee69::1/60 scope global noprefixroute
       valid_lft forever preferred_lft forever
    inet6 fe80::a00:27ff:fe3a:49cc/64 scope link
       valid_lft forever preferred_lft forever
root@LEDE:~#

$ fgrep -i procd .config
CONFIG_PACKAGE_procd=y
# CONFIG_PROCD_SHOW_BOOT is not set
# CONFIG_PROCD_ZRAM_TMPFS is not set
CONFIG_PACKAGE_procd-seccomp=y
CONFIG_PACKAGE_procd-ujail=y
$
$ fgrep -i dnsm .config
CONFIG_DEFAULT_dnsmasq=y
# CONFIG_PACKAGE_dnsmasq is not set
# CONFIG_PACKAGE_dnsmasq-dhcpv6 is not set
CONFIG_PACKAGE_dnsmasq-full=y
# CONFIG_PACKAGE_dnsmasq_full_dhcpv6 is not set
# CONFIG_PACKAGE_dnsmasq_full_dnssec is not set
# CONFIG_PACKAGE_dnsmasq_full_auth is not set
CONFIG_PACKAGE_dnsmasq_full_ipset=y
CONFIG_PACKAGE_dnsmasq_full_conntrack=y
CONFIG_PACKAGE_dnsmasq_full_noid=y
# CONFIG_PACKAGE_dnsmasq_full_broken_rtc is not set
$


$ ./scripts/diffconfig.sh|grep -v ^#
CONFIG_TARGET_x86=y
CONFIG_TARGET_x86_generic=y
CONFIG_TARGET_x86_generic_Generic=y
CONFIG_ALL=y
CONFIG_ALL_KMODS=y
CONFIG_ALL_NONSHARED=y
CONFIG_DEVEL=y
CONFIG_TOOLCHAINOPTS=y
CONFIG_DROPBEAR_ECC=y
CONFIG_EXTRA_OPTIMIZATION="-fno-caller-saves"
CONFIG_IB=y
CONFIG_IB_STANDALONE=y
CONFIG_KERNEL_AIO=y
CONFIG_KERNEL_CC_STACKPROTECTOR_STRONG=y
CONFIG_KERNEL_IPC_NS=y
CONFIG_KERNEL_NAMESPACES=y
CONFIG_KERNEL_NET_NS=y
CONFIG_KERNEL_PID_NS=y
CONFIG_KERNEL_SECCOMP=y
CONFIG_KERNEL_SECCOMP_FILTER=y
CONFIG_KERNEL_USER_NS=y
CONFIG_KERNEL_UTS_NS=y
CONFIG_LIBCURL_OPENSSL=y
CONFIG_MAKE_TOOLCHAIN=y
CONFIG_PACKAGE_ath9k-htc-firmware=y
CONFIG_PACKAGE_ca-certificates=y
CONFIG_PACKAGE_chat=y
CONFIG_PACKAGE_comgt=y
CONFIG_PACKAGE_curl=y
CONFIG_PACKAGE_ddns-scripts=y
CONFIG_PACKAGE_dnsmasq-full=y
CONFIG_PACKAGE_gre=y
CONFIG_PACKAGE_grev4=y
CONFIG_PACKAGE_hostapd-common=y
CONFIG_PACKAGE_iftop=y
CONFIG_PACKAGE_ip-tiny=y
CONFIG_PACKAGE_ipset=y
CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
CONFIG_PACKAGE_iptables-mod-hashlimit=y
CONFIG_PACKAGE_iptables-mod-ipopt=y
CONFIG_PACKAGE_iptables-mod-ipsec=y
CONFIG_PACKAGE_iptables-mod-tee=y
CONFIG_PACKAGE_iw=y
CONFIG_PACKAGE_iwinfo=y
CONFIG_PACKAGE_kmod-ath=y
CONFIG_PACKAGE_kmod-ath9k=y
CONFIG_PACKAGE_kmod-ath9k-common=y
CONFIG_PACKAGE_kmod-ath9k-htc=y
CONFIG_PACKAGE_kmod-cfg80211=y
CONFIG_PACKAGE_kmod-crypto-aead=y
CONFIG_PACKAGE_kmod-crypto-authenc=y
CONFIG_PACKAGE_kmod-crypto-cbc=y
CONFIG_PACKAGE_kmod-crypto-crc32c=y
CONFIG_PACKAGE_kmod-crypto-deflate=y
CONFIG_PACKAGE_kmod-crypto-des=y
CONFIG_PACKAGE_kmod-crypto-echainiv=y
CONFIG_PACKAGE_kmod-crypto-hash=y
CONFIG_PACKAGE_kmod-crypto-hmac=y
CONFIG_PACKAGE_kmod-crypto-iv=y
CONFIG_PACKAGE_kmod-crypto-manager=y
CONFIG_PACKAGE_kmod-crypto-md5=y
CONFIG_PACKAGE_kmod-crypto-null=y
CONFIG_PACKAGE_kmod-crypto-pcompress=y
CONFIG_PACKAGE_kmod-crypto-rng=y
CONFIG_PACKAGE_kmod-crypto-sha1=y
CONFIG_PACKAGE_kmod-crypto-sha256=y
CONFIG_PACKAGE_kmod-crypto-wq=y
CONFIG_PACKAGE_kmod-fs-ext4=y
CONFIG_PACKAGE_kmod-gpio-button-hotplug=y
CONFIG_PACKAGE_kmod-gre=y
CONFIG_PACKAGE_kmod-i2c-algo-bit=y
CONFIG_PACKAGE_kmod-i2c-core=y
CONFIG_PACKAGE_kmod-ifb=y
CONFIG_PACKAGE_kmod-igb=y
CONFIG_PACKAGE_kmod-ipsec=y
CONFIG_PACKAGE_kmod-ipsec4=y
CONFIG_PACKAGE_kmod-ipsec6=y
CONFIG_PACKAGE_kmod-ipt-conntrack-extra=y
CONFIG_PACKAGE_kmod-ipt-hashlimit=y
CONFIG_PACKAGE_kmod-ipt-ipopt=y
CONFIG_PACKAGE_kmod-ipt-ipsec=y
CONFIG_PACKAGE_kmod-ipt-ipset=y
CONFIG_PACKAGE_kmod-ipt-tee=y
CONFIG_PACKAGE_kmod-iptunnel=y
CONFIG_PACKAGE_kmod-iptunnel4=y
CONFIG_PACKAGE_kmod-iptunnel6=y
CONFIG_PACKAGE_kmod-leds-gpio=y
CONFIG_PACKAGE_kmod-ledtrig-default-on=y
CONFIG_PACKAGE_kmod-ledtrig-netdev=y
CONFIG_PACKAGE_kmod-ledtrig-timer=y
CONFIG_PACKAGE_kmod-lib-crc16=y
CONFIG_PACKAGE_kmod-lib-crc32c=y
CONFIG_PACKAGE_kmod-lib-textsearch=y
CONFIG_PACKAGE_kmod-lib-zlib-deflate=y
CONFIG_PACKAGE_kmod-lib-zlib-inflate=y
CONFIG_PACKAGE_kmod-mac80211=y
CONFIG_PACKAGE_kmod-nf-conntrack-netlink=y
CONFIG_PACKAGE_kmod-nf-nathelper=y
CONFIG_PACKAGE_kmod-nf-nathelper-extra=y
CONFIG_PACKAGE_kmod-nfnetlink=y
CONFIG_PACKAGE_kmod-nls-base=y
CONFIG_PACKAGE_kmod-sched=y
CONFIG_PACKAGE_kmod-sched-cake=y
CONFIG_PACKAGE_kmod-sched-core=y
CONFIG_PACKAGE_kmod-tun=y
CONFIG_PACKAGE_kmod-usb-acm=y
CONFIG_PACKAGE_kmod-usb-core=y
CONFIG_PACKAGE_kmod-usb-net=y
CONFIG_PACKAGE_kmod-usb-net-cdc-ncm=y
CONFIG_PACKAGE_kmod-usb-net-huawei-cdc-ncm=y
CONFIG_PACKAGE_kmod-usb-net-qmi-wwan=y
CONFIG_PACKAGE_kmod-usb-ohci=y
CONFIG_PACKAGE_kmod-usb-serial=y
CONFIG_PACKAGE_kmod-usb-serial-option=y
CONFIG_PACKAGE_kmod-usb-serial-wwan=y
CONFIG_PACKAGE_kmod-usb-wdm=y
CONFIG_PACKAGE_kmod-usb2=y
CONFIG_PACKAGE_kmod-vmxnet3=y
CONFIG_PACKAGE_libcurl=y
CONFIG_PACKAGE_libgmp=y
CONFIG_PACKAGE_libiwinfo=y
CONFIG_PACKAGE_liblzo=y
CONFIG_PACKAGE_libmnl=y
CONFIG_PACKAGE_libncurses=y
CONFIG_PACKAGE_libnetfilter-conntrack=y
CONFIG_PACKAGE_libopenssl=y
CONFIG_PACKAGE_libpcap=y
CONFIG_PACKAGE_libseccomp=y
CONFIG_PACKAGE_libusb-1.0=y
CONFIG_PACKAGE_mtr=y
CONFIG_PACKAGE_netstat-nat=y
CONFIG_PACKAGE_openssl-util=y
CONFIG_PACKAGE_openvpn-openssl=y
CONFIG_PACKAGE_procd-seccomp=y
CONFIG_PACKAGE_procd-ujail=y
CONFIG_PACKAGE_resolveip=y
CONFIG_PACKAGE_softflowd=y
CONFIG_PACKAGE_sqm-scripts=y
CONFIG_PACKAGE_sqm-scripts-extra=y
CONFIG_PACKAGE_ssmtp=y
CONFIG_PACKAGE_strongswan=y
CONFIG_PACKAGE_strongswan-charon=y
CONFIG_PACKAGE_strongswan-default=y
CONFIG_PACKAGE_strongswan-mod-aes=y
CONFIG_PACKAGE_strongswan-mod-attr=y
CONFIG_PACKAGE_strongswan-mod-connmark=y
CONFIG_PACKAGE_strongswan-mod-constraints=y
CONFIG_PACKAGE_strongswan-mod-des=y
CONFIG_PACKAGE_strongswan-mod-dnskey=y
CONFIG_PACKAGE_strongswan-mod-fips-prf=y
CONFIG_PACKAGE_strongswan-mod-gmp=y
CONFIG_PACKAGE_strongswan-mod-hmac=y
CONFIG_PACKAGE_strongswan-mod-kernel-netlink=y
CONFIG_PACKAGE_strongswan-mod-md5=y
CONFIG_PACKAGE_strongswan-mod-nonce=y
CONFIG_PACKAGE_strongswan-mod-pem=y
CONFIG_PACKAGE_strongswan-mod-pgp=y
CONFIG_PACKAGE_strongswan-mod-pkcs1=y
CONFIG_PACKAGE_strongswan-mod-pubkey=y
CONFIG_PACKAGE_strongswan-mod-random=y
CONFIG_PACKAGE_strongswan-mod-rc2=y
CONFIG_PACKAGE_strongswan-mod-resolve=y
CONFIG_PACKAGE_strongswan-mod-revocation=y
CONFIG_PACKAGE_strongswan-mod-sha1=y
CONFIG_PACKAGE_strongswan-mod-sha2=y
CONFIG_PACKAGE_strongswan-mod-socket-default=y
CONFIG_PACKAGE_strongswan-mod-sshkey=y
CONFIG_PACKAGE_strongswan-mod-stroke=y
CONFIG_PACKAGE_strongswan-mod-updown=y
CONFIG_PACKAGE_strongswan-mod-x509=y
CONFIG_PACKAGE_strongswan-mod-xauth-generic=y
CONFIG_PACKAGE_strongswan-mod-xcbc=y
CONFIG_PACKAGE_strongswan-utils=y
CONFIG_PACKAGE_swconfig=y
CONFIG_PACKAGE_tc=y
CONFIG_PACKAGE_tcpdump-mini=y
CONFIG_PACKAGE_terminfo=y
CONFIG_PACKAGE_uboot-envtools=y
CONFIG_PACKAGE_uqmi=y
CONFIG_PACKAGE_usb-modeswitch=y
CONFIG_PACKAGE_usbreset=y
CONFIG_PACKAGE_wpad-mini=y
CONFIG_PACKAGE_wwan=y
CONFIG_PKG_CC_STACKPROTECTOR_STRONG=y
CONFIG_KERNEL_DIRECT_IO=y
CONFIG_OPENSSL_ENGINE_CRYPTO=y
$
01.08.2018 1720 KernelBug ReportHighHigh TL-WDR4310v1 crash by "data bus error" from ath9k lede-17.01Closed Task Description

TL-WDR4310v1 running LEDE 17.01.5 with “kmod-mac80211 - 4.4.140+2017-01-31-5”

The trigger is yet unknown. It happens roughly once in 2 or 3 days.

/sys/kernel/debug/crashlog shows that the kernel runs perfectly fine before “the DMA failed to stop error”. Searching through the internet reveals that the DMA error already exist for a long time.

Is it possible “Data bus error” means the hardware malfunctioned and there is no way for the driver to recover, thus the oops and crash?

– Update
The device has 8 stations associated to 2.4Ghz channel, and 26 stations to 5Ghz

<4>[14291.045544] ICMPv6: process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.br-lan.base_reachable_time - use net.ipv6.neigh.br-lan.base_reachable_time_ms instead
<4>[14291.105605] nr_pdflush_threads exported in /proc is scheduled for removal
<3>[218801.560040] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02100020 DMADBG_7=0x00006400
<1>[223811.495342] Data bus error, epc == 87703774, ra == 87703774
<4>[223811.501097] Oops[#1]:
<4>[223811.503502] CPU: 0 PID: 10421 Comm: kworker/u2:1 Not tainted 4.4.140 #0
<4>[223811.510308] Workqueue: phy1 0x8758531c [ath9k@87580000+0x16650]
<4>[223811.516406] task: 87cb8510 ti: 87c46000 task.ti: 87c46000
<4>[223811.521963] $ 0   : 00000000 80450000 deadc0de 00000000
<4>[223811.527384] $ 4   : b0007000 00007000 00000003 00000000
<4>[223811.532814] $ 8   : 0022ee0f db7e7b0c e4924925 00000000
<4>[223811.538243] $12   : 000038fd ffffff94 00000001 00000000
<4>[223811.543664] $16   : 00002710 87ca6010 00000000 00007000
<4>[223811.549084] $20   : 00000003 00000000 00000034 00000003
<4>[223811.554505] $24   : 00000000 87581b58
<4>[223811.559927] $28   : 87c46000 87c47d58 b8815392 87703774
<4>[223811.565356] Hi    : 00000000
<4>[223811.568366] Lo    : 00002710
<4>[223811.571385] epc   : 87703774 0x87703774 [ath9k_hw@87700000+0x51280]
<4>[223811.577834] ra    : 87703774 0x87703774 [ath9k_hw@87700000+0x51280]
<4>[223811.584276] Status: 1100dc03     KERNEL EXL IE
<4>[223811.588634] Cause : 0080001c (ExcCode 07)
<4>[223811.592787] PrId  : 0001974c (MIPS 74Kc)
<4>[223811.596851] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY wireguard slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_mangle iptable_filter ipt_ECN ip_tables
crc_ccitt compat sch_cake nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ifb ip6_udp_tunnel udp_tunnel tun ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
<4>[223811.718157] Process kworker/u2:1 (pid: 10421, threadinfo=87c46000, task=87cb8510, tls=00000000)
<4>[223811.727063] Stack : 8706e858 87ca6410 877e1c54 87ca6038 87ca6410 87ca6010 00020000 00007000
<4>[223811.727063]        000001c0 1aa3616f 87ca6038 87703b44 ff93d460 ff92ff92 ff930000 00000000
<4>[223811.727063]        000186a0 87ca6410 8706e858 87ca6010 87ca6410 8706e858 00000000 87706c74
<4>[223811.727063]        87ca6410 00000088 803f0000 875878d0 8706de40 00000001 00036a43 1b3d9a8b
<4>[223811.727063]        00000000 00036a43 1b3d9a8b 87ca6410 8706d460 8706e858 8706ddf8 8706de0c
<4>[223811.727063]        ...
<4>[223811.763478] Call Trace:[<87703b44>] 0x87703b44 [ath9k_hw@87700000+0x51280]
<4>[223811.770637] [<87706c74>] 0x87706c74 [ath9k_hw@87700000+0x51280]
<4>[223811.776738] [<875878d0>] 0x875878d0 [ath9k@87580000+0x16650]
<4>[223811.782596] [<875851e0>] 0x875851e0 [ath9k@87580000+0x16650]
<4>[223811.788429] [<8009ff5c>] 0x8009ff5c
<4>[223811.792074] [<87585340>] 0x87585340 [ath9k@87580000+0x16650]
<4>[223811.797899] [<80066c50>] 0x80066c50
<4>[223811.801524] [<80093588>] 0x80093588
<4>[223811.805191] [<800943dc>] 0x800943dc
<4>[223811.808820] [<80094100>] 0x80094100
<4>[223811.812446] [<80094100>] 0x80094100
<4>[223811.816072] [<800987fc>] 0x800987fc
<4>[223811.819724] [<80098724>] 0x80098724
<4>[223811.823356] [<80060878>] 0x80060878
<4>[223811.826987]
<4>[223811.828589]
<4>[223811.828589] Code: 02202021  0040f809  00000000 <00541024> 10550008  24020001  0c06d92a  2404000a  1000fff4
<4>[223811.838888] ---[ end trace 83c6a0854e49a922 ]---

===================================
16.08.2017 965 Base systemBug ReportHighLow flyspray: github login is broken when user changed the  ...AllClosed Task Description

The user must already registered with the old email.
The user tries to login with the new email via github oauth, flysprays
rejects the user with “Error #23: User or group not enabled for login.”

21.02.2017 544 Base systemBug ReportHighCritical kmodloader segfault on ixp4xx (armeb) AllClosed Task Description

I believe this issue to be a really obscure endian problem which may be more toolchain related than a raw software bug in the source code. I’ve tried to work-around this issue with code changes, but the problem persists. I give up...

Inside the routine ‘alloc_module’ the following code produces the wrong result – specifically byte-swapped pointers in the ‘_aliases’ array.

 char **_aliases;
 ...
 char *ptr = (char *)_aliases + naliases * sizeof(_aliases[0]);
 int len;
 
 i = 0;
 do {
    len = strlen(aliases[i]) + 1;
    memcpy(ptr, aliases[i], len);
    _aliases[i] = ptr;               <<-- this is the failing assignment
    ptr += len;
    i++;
 } while (i < naliases);
30.01.2017 444 Base systemBug ReportHighHigh qemu/host: multiple definition of AES_* TrunkClosed Task Description

Unable to compile lede-17.01 r3043-31b0640 x86/64 nor master r3208-bdd1fad
Did make clean, make dirclean, rm -rf build_dir/host* staging_dir/host/

make[4]: Entering directory '/home/stijn/Development/LEDE/source/build_dir/host/qemu-0.14.1'
gcc -m64 -D_FORTIFY_SOURCE=2 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wendif-labels -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -O2 -I/home/stijn/Development/LEDE/source/staging_dir/host/include -I/home/stijn/Development/LEDE/source/staging_dir/host/usr/include  -I/home/stijn/Development/LEDE/source/staging_dir/host/include/e2fsprogs   -O2 -g -O2 -I/home/stijn/Development/LEDE/source/staging_dir/host/include -I/home/stijn/Development/LEDE/source/staging_dir/host/usr/include  -I/home/stijn/Development/LEDE/source/staging_dir/host/include/e2fsprogs -Wl,--warn-common -m64 -g -L/home/stijn/Development/LEDE/source/staging_dir/host/lib -L/home/stijn/Development/LEDE/source/staging_dir/host/usr/lib  -o qemu-img qemu-img.o qemu-tool.o qemu-error.o osdep.o oslib-posix.o trace.o cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o nbd.o block.o aio.o aes.o qemu-config.o posix-aio-compat.o linux-aio.o block/raw.o block/cow.o block/qcow.o block/vdi.o block/vmdk.o block/cloop.o block/dmg.o block/bochs.o block/vpc.o block/vvfat.o block/qcow2.o block/qcow2-refcount.o block/qcow2-cluster.o block/qcow2-snapshot.o block/qcow2-cache.o block/qed.o block/qed-gencb.o block/qed-l2-cache.o block/qed-table.o block/qed-cluster.o block/qed-check.o block/parallels.o block/nbd.o block/blkdebug.o block/sheepdog.o block/blkverify.o block/raw-posix.o block/curl.o qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o qjson.o json-lexer.o json-streamer.o json-parser.o qerror.o qemu-timer-common.o -lattr -lpthread  -lz -lcurl -lidn2 -lssl -lcrypto -lssl -lcrypto -llber -lldap -lz -luuid  -laio
/home/stijn/Development/LEDE/source/staging_dir/host/lib/libcrypto.a(libcrypto_la-cpuid-elf-x86_64.o): warning: multiple common of `OPENSSL_ia32cap_P'
/home/stijn/Development/LEDE/source/staging_dir/host/lib/libcrypto.a(libcrypto_la-cryptlib.o): warning: previous common is here
/home/stijn/Development/LEDE/source/staging_dir/host/lib/libcrypto.a(aes-elf-x86_64.o): In function `AES_encrypt':
(.text+0x460): multiple definition of `AES_encrypt'
aes.o:/home/stijn/Development/LEDE/source/build_dir/host/qemu-0.14.1/aes.c:886: first defined here
/home/stijn/Development/LEDE/source/staging_dir/host/lib/libcrypto.a(aes-elf-x86_64.o): In function `AES_decrypt':
(.text+0x9f0): multiple definition of `AES_decrypt'
aes.o:/home/stijn/Development/LEDE/source/build_dir/host/qemu-0.14.1/aes.c:1077: first defined here
/home/stijn/Development/LEDE/source/staging_dir/host/lib/libcrypto.a(aes-elf-x86_64.o): In function `AES_set_encrypt_key':
(.text+0xab0): multiple definition of `AES_set_encrypt_key'
aes.o:/home/stijn/Development/LEDE/source/build_dir/host/qemu-0.14.1/aes.c:738: first defined here
/home/stijn/Development/LEDE/source/staging_dir/host/lib/libcrypto.a(aes-elf-x86_64.o): In function `AES_set_decrypt_key':
(.text+0xd80): multiple definition of `AES_set_decrypt_key'
aes.o:/home/stijn/Development/LEDE/source/build_dir/host/qemu-0.14.1/aes.c:833: first defined here
/home/stijn/Development/LEDE/source/staging_dir/host/lib/libcrypto.a(aes-elf-x86_64.o): In function `AES_cbc_encrypt':
(.text+0xfa0): multiple definition of `AES_cbc_encrypt'
aes.o:/home/stijn/Development/LEDE/source/build_dir/host/qemu-0.14.1/aes.c:1268: first defined here
/usr/lib64/libssl.so.1.0.0: warning: warning: EVP_EncryptFinal is often misused, please use EVP_EncryptFinal_ex and EVP_CIPHER_CTX_cleanup
/usr/lib64/libssl.so.1.0.0: warning: warning: EVP_DecryptFinal is often misused, please use EVP_DecryptFinal_ex and EVP_CIPHER_CTX_cleanup
/usr/lib64/libcrypto.so.1.0.0: warning: multiple common of `sig_app'
/home/stijn/Development/LEDE/source/staging_dir/host/lib/libcrypto.a(libcrypto_la-obj_xref.o): warning: previous common is here
/usr/lib64/libcrypto.so.1.0.0: warning: multiple common of `sigx_app'
/home/stijn/Development/LEDE/source/staging_dir/host/lib/libcrypto.a(libcrypto_la-obj_xref.o): warning: previous common is here
/usr/lib64/libcrypto.so.1.0.0: warning: warning: EVP_CipherFinal is often misused, please use EVP_CipherFinal_ex and EVP_CIPHER_CTX_cleanup
collect2: error: ld returned 1 exit status
make[4]: *** [/home/stijn/Development/LEDE/source/build_dir/host/qemu-0.14.1/rules.mak:29: qemu-img] Error 1
make[4]: Leaving directory '/home/stijn/Development/LEDE/source/build_dir/host/qemu-0.14.1'
make[3]: *** [Makefile:41: /home/stijn/Development/LEDE/source/build_dir/host/qemu-0.14.1/.built] Error 2
make[3]: Leaving directory '/home/stijn/Development/LEDE/source/tools/qemu'
make[2]: *** [tools/Makefile:148: tools/qemu/compile] Error 2
make[2]: Leaving directory '/home/stijn/Development/LEDE/source'
make[1]: *** [tools/Makefile:145: /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl-1.1.15/stamp/.tools_install_yynyyyyynyyyyynyynnyyyynyyyyyyyyyyyyyyyyyynynnyyynnny] Error 2
make[1]: Leaving directory '/home/stijn/Development/LEDE/source'
make: *** [/home/stijn/Development/LEDE/source/include/toplevel.mk:199: world] Error 2
12.12.2016 333 KernelBug ReportHighHigh ath10k_pci: crash after ~10d uptime TrunkClosed Task Description

After ~10 days of uptime, ath10k crashed and I could no longer associate.

Device: D-Link DAP-2695 rev A1
Running: LEDE r2370

Wireless config:

config wifi-device  radio0
        option type     mac80211
        option channel  100
        option country  BE
        option txpower  20
        option hwmode   11a
        option path     'pci0000:00/0000:00:00.0'
        option htmode   VHT80
        option disabled 0

config wifi-iface
        option device 'radio0'
        option ifname 'wlan0'
        option encryption 'psk2'
        option ieee80211d '1'
        option ieee80211w '1'
        option peerkey '1'
        option rsn_preauth '1'
        option network 'lan'
        option mode 'ap'
        option ssid 'xxxxxxxx'
        option key 'XXXXXXXX'

config wifi-iface
        option device 'radio0'
        option ifname 'wlan2'
        option encryption 'psk2'
        option ieee80211d '1'
        option ieee80211w '1'
        option peerkey '1'
        option rsn_preauth '0'
        option network 'guest'
        option mode 'ap'
        option ssid 'Guests'
        option key 'YYYYYYYY'
        #option disassoc_low_ack '0'

config wifi-device  radio1
        option type     mac80211
        option channel  1
        option country  BE
        option txpower  20
        option hwmode   11g
        option path     'platform/qca955x_wmac'
        option htmode   HT40
        #option noscan   1

config wifi-iface
        option device 'radio1'
        option ifname 'wlan1'
        option encryption 'psk2'
        option ieee80211d '1'
        option ieee80211w '1'
        option peerkey '1'
        option rsn_preauth '1'
        option mode 'ap'
        option network 'lan'
        option ssid 'xxxxxxxx'
        option key 'XXXXXXXX'

config wifi-iface
        option device 'radio1'
        option ifname 'wlan3'
        option encryption 'psk2'
        option ieee80211d '1'
        option ieee80211w '1'
        option peerkey '1'
        option rsn_preauth '0'
        option network 'guest'
        option mode 'ap'
        option ssid 'Guests'
        option key 'YYYYYYYY'
        #option disassoc_low_ack '0'

Kernel log:

[   54.439387] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[   54.652312] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[   54.663197] ath10k_pci 0000:00:00.0: Falling back to user helper
[   54.742675] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[   54.752039] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[   54.762568] ath10k_pci 0000:00:00.0: Falling back to user helper
[   61.648688] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[   61.658088] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[   61.671139] ath10k_pci 0000:00:00.0: firmware ver 10.2.4.70.54 api 5 features no-p2p,raw-mode,mfp crc32 9d340dd9
[   61.681571] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[   61.692178] ath10k_pci 0000:00:00.0: Falling back to user helper
[   61.771624] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[   61.786987] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[   62.893736] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[   63.001904] ath: EEPROM regdomain: 0x0
[   63.001920] ath: EEPROM indicates default country code should be used
[   63.001928] ath: doing EEPROM country->regdmn map search
[   63.001945] ath: country maps to regdmn code: 0x3a
[   63.001955] ath: Country alpha2 being used: US
[   63.001963] ath: Regpair used: 0x3a
[   63.284566] ath: EEPROM regdomain: 0x0
[   63.284583] ath: EEPROM indicates default country code should be used
[   63.284591] ath: doing EEPROM country->regdmn map search
[   63.284608] ath: country maps to regdmn code: 0x3a
[   63.284617] ath: Country alpha2 being used: US
[   63.284625] ath: Regpair used: 0x3a
[   72.829974] ath: EEPROM regdomain: 0x8038
[   72.834045] ath: EEPROM indicates we should expect a country code
[   72.840265] ath: doing EEPROM country->regdmn map search
[   72.845651] ath: country maps to regdmn code: 0x37
[   72.850522] ath: Country alpha2 being used: BE
[   72.855022] ath: Regpair used: 0x37
[   72.858554] ath: regdomain 0x8038 dynamically updated by user
[   72.864452] ath: EEPROM regdomain: 0x8038
[   72.868513] ath: EEPROM indicates we should expect a country code
[   72.874707] ath: doing EEPROM country->regdmn map search
[   72.880092] ath: country maps to regdmn code: 0x37
[   72.884943] ath: Country alpha2 being used: BE
[   72.889458] ath: Regpair used: 0x37
[   72.892996] ath: regdomain 0x8038 dynamically updated by user
[920549.560152] ath10k_pci 0000:00:00.0: failed to delete peer c0:ee:fb:4a:18:b7 for vdev 0: -145
[920549.568951] ath10k_pci 0000:00:00.0: found sta peer c0:ee:fb:4a:18:b7 (ptr 8d43f600 id 95) entry on vdev 0 after it was supposedly removed
[920549.581722] ------------[ cut here ]------------
[920549.586618] WARNING: CPU: 0 PID: 1431 at compat-wireless-2016-10-08/net/mac80211/sta_info.c:964 sta_set_sinfo+0x92c/0x9e0 [mac80211]()
[920549.598968] Modules linked in: ath9k ath9k_common crc_ccitt ath9k_hw act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_hfsc sch_ingress ath10k_pci ath10k_core ath mac80211 cfg80211 compat gpio_button_hotplug
[920549.620582] CPU: 0 PID: 1431 Comm: hostapd Not tainted 4.4.35 #0
[920549.626772] Stack : 803c2d64 00000000 00000001 80420000 8fe26580 8040acc3 803a4424 00000597
[920549.626772]           8047379c 8ff8d000 00000000 77415e94 00000000 800a7198 803a9a90 80400000
[920549.626772]           00000003 8ff8d000 803a7e9c 8e5f3b2c 00000000 800a5114 80400000 00000000
[920549.626772]           00000001 801f3100 00000000 00000000 00000000 00000000 00000000 00000000
[920549.626772]           00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[920549.626772]           ...
[920549.663219] Call Trace:
[920549.665810] [<80071ae0>] show_stack+0x50/0x84
[920549.670323] [<80081860>] warn_slowpath_common+0xa0/0xd0
[920549.675724] [<80081918>] warn_slowpath_null+0x18/0x24
[920549.680994] [<8f5870a4>] sta_set_sinfo+0x92c/0x9e0 [mac80211]
[920549.686990] [<8f587188>] __sta_info_destroy+0x30/0x48 [mac80211]
[920549.693222] [<8f587238>] sta_info_destroy_addr_bss+0x38/0x60 [mac80211]
[920549.700118] [<8f54c144>] cfg80211_check_station_change+0xed8/0x1390 [cfg80211]
[920549.707564] 
[920549.709166] ---[ end trace e15a227055dd36c2 ]---
[920866.693883] ath10k_pci 0000:00:00.0: failed to install key for vdev 0 peer b0:df:3a:12:79:80: -145
[920866.703088] wlan0: failed to remove key (0, b0:df:3a:12:79:80) from hardware (-145)
[920866.719519] ath10k_pci 0000:00:00.0: cipher 0 is not supported
[920866.725602] ath10k_pci 0000:00:00.0: failed to remove peer wep key 0: -122
[920866.732670] ath10k_pci 0000:00:00.0: failed to clear all peer wep keys for vdev 0: -122
[920866.740901] ath10k_pci 0000:00:00.0: failed to disassociate station: b0:df:3a:12:79:80 vdev 0: -122
[920866.750169] ------------[ cut here ]------------
[920866.755066] WARNING: CPU: 0 PID: 1431 at compat-wireless-2016-10-08/net/mac80211/sta_info.c:956 sta_set_sinfo+0x8d8/0x9e0 [mac80211]()
[920866.767421] Modules linked in: ath9k ath9k_common crc_ccitt ath9k_hw act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_hfsc sch_ingress ath10k_pci ath10k_core ath mac80211 cfg80211 compat gpio_button_hotplug
[920866.789044] CPU: 0 PID: 1431 Comm: hostapd Tainted: G        W       4.4.35 #0
[920866.796465] Stack : 803c2d64 00000000 00000001 80420000 8fe26580 8040acc3 803a4424 00000597
[920866.796465]           8047379c 8ff8d000 00000000 77415e94 00000000 800a7198 803a9a90 80400000
[920866.796465]           00000003 8ff8d000 803a7e9c 8e5f3b2c 00000000 800a5114 00000000 00000000
[920866.796465]           80409dd0 801f3100 00000000 00000000 00000000 00000000 00000000 00000000
[920866.796465]           00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[920866.796465]           ...
[920866.832912] Call Trace:
[920866.835502] [<80071ae0>] show_stack+0x50/0x84
[920866.840016] [<80081860>] warn_slowpath_common+0xa0/0xd0
[920866.845417] [<80081918>] warn_slowpath_null+0x18/0x24
[920866.850691] [<8f587050>] sta_set_sinfo+0x8d8/0x9e0 [mac80211]
[920866.856685] [<8f587188>] __sta_info_destroy+0x30/0x48 [mac80211]
[920866.862914] [<8f587238>] sta_info_destroy_addr_bss+0x38/0x60 [mac80211]
[920866.869817] [<8f54c144>] cfg80211_check_station_change+0xed8/0x1390 [cfg80211]
[920866.877266] 
[920866.878867] ---[ end trace e15a227055dd36c3 ]---
[920869.873901] ath10k_pci 0000:00:00.0: failed to delete peer b0:df:3a:12:79:80 for vdev 0: -11
[920869.882572] ath10k_pci 0000:00:00.0: found sta peer b0:df:3a:12:79:80 (ptr 8f3f3000 id 243) entry on vdev 0 after it was supposedly removed
[920872.893898] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[920875.893871] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[920878.913873] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[920881.913852] ath10k_pci 0000:00:00.0: failed to set protection mode 0 on vdev 0: -11
[920884.913828] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[920887.923826] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 1: -11
[920890.923830] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 1: -11
[920893.933787] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 1: -11
[920896.933770] ath10k_pci 0000:00:00.0: failed to set protection mode 0 on vdev 1: -11
[920899.933771] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 1: -11

Kernel log after running “wifi” in the crashed state:

[921144.042842] ath10k_pci 0000:00:00.0: failed to install key for vdev 0 peer 9c:d6:43:29:cc:18: -11
[921144.051948] wlan0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-11)
[921147.052846] ath10k_pci 0000:00:00.0: failed to install key for vdev 0 peer 9c:d6:43:29:cc:18: -11
[921147.061984] wlan0: failed to set key (2, ff:ff:ff:ff:ff:ff) to hardware (-11)
[921150.082845] ath10k_pci 0000:00:00.0: failed to install key for vdev 1 peer 9e:d6:43:29:cc:18: -11
[921150.092017] wlan2: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-11)
[921153.092796] ath10k_pci 0000:00:00.0: failed to install key for vdev 1 peer 9e:d6:43:29:cc:18: -11
[921153.101928] wlan2: failed to set key (2, ff:ff:ff:ff:ff:ff) to hardware (-11)
[932082.286927] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[932390.335807] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[932607.674665] ath10k_pci 0000:00:00.0: failed to down vdev_id 1: -11
[932610.674753] ath10k_pci 0000:00:00.0: failed to stop WMI vdev 1: -11
[932610.682338] ath10k_pci 0000:00:00.0: failed to stop vdev 1: -11
[932613.684666] ath10k_pci 0000:00:00.0: failed to install key for vdev 1 peer 9e:d6:43:29:cc:18: -11
[932613.694955] wlan2: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-11)
[932616.694882] ath10k_pci 0000:00:00.0: failed to submit AP/IBSS self-peer removal on vdev 1: -11
[932619.694635] ath10k_pci 0000:00:00.0: failed to delete WMI vdev 1: -11
[932622.694758] ath10k_pci 0000:00:00.0: failed to remove AP self-peer on vdev 1: -145
[932622.704039] ath10k_pci 0000:00:00.0: found vif peer 9e:d6:43:29:cc:18 entry on vdev 1 after it was supposedly removed
[932622.715667] ath10k_pci 0000:00:00.0: removing stale peer 9e:d6:43:29:cc:18 from vdev_id 1
[932622.724455] br-guest: port 3(wlan2) entered disabled state
[932622.796620] device wlan2 left promiscuous mode
[932622.802446] br-guest: port 3(wlan2) entered disabled state
[932622.856835] br-guest: port 2(wlan3) entered disabled state
[932622.885493] device wlan3 left promiscuous mode
[932622.891306] br-guest: port 2(wlan3) entered disabled state
[932622.935955] device wlan0 left promiscuous mode
[932622.940833] br-lan: port 2(wlan0) entered disabled state
[932622.976382] device wlan1 left promiscuous mode
[932622.981149] br-lan: port 3(wlan1) entered disabled state
[932626.004584] ath10k_pci 0000:00:00.0: failed to down vdev_id 0: -11
[932629.004572] ath10k_pci 0000:00:00.0: failed to stop WMI vdev 0: -11
[932629.011031] ath10k_pci 0000:00:00.0: failed to stop vdev 0: -11
[932634.014537] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[932637.034556] ath10k_pci 0000:00:00.0: failed to install key for vdev 0 peer 9c:d6:43:29:cc:18: -11
[932637.043707] wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-11)
[932640.044532] ath10k_pci 0000:00:00.0: failed to submit AP/IBSS self-peer removal on vdev 0: -11
[932643.044507] ath10k_pci 0000:00:00.0: failed to delete WMI vdev 0: -11
[932646.044501] ath10k_pci 0000:00:00.0: failed to remove AP self-peer on vdev 0: -145
[932646.052277] ath10k_pci 0000:00:00.0: found vif peer 9c:d6:43:29:cc:18 entry on vdev 0 after it was supposedly removed
[932646.063205] ath10k_pci 0000:00:00.0: removing stale peer 9c:d6:43:29:cc:18 from vdev_id 0
[932652.064468] ath10k_pci 0000:00:00.0: could not suspend target (-11)
[932653.410146] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[932654.710106] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[932654.716877] device wlan1 entered promiscuous mode
[932654.755523] device wlan0 entered promiscuous mode
[932655.397455] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[932655.404141] br-lan: port 3(wlan0) entered forwarding state
[932655.409904] br-lan: port 3(wlan0) entered forwarding state
[932655.426138] device wlan2 entered promiscuous mode
[932655.445231] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[932655.451454] br-guest: port 2(wlan2) entered forwarding state
[932655.457370] br-guest: port 2(wlan2) entered forwarding state
[932655.714483] br-guest: port 2(wlan2) entered disabled state
[932655.842761] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[932655.849460] br-guest: port 2(wlan2) entered forwarding state
[932655.855380] br-guest: port 2(wlan2) entered forwarding state
[932656.428869] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[932656.435563] br-lan: port 2(wlan1) entered forwarding state
[932656.441274] br-lan: port 2(wlan1) entered forwarding state
[932656.466101] device wlan3 entered promiscuous mode
[932656.477745] IPv6: ADDRCONF(NETDEV_UP): wlan3: link is not ready
[932656.483865] br-guest: port 3(wlan3) entered forwarding state
[932656.489791] br-guest: port 3(wlan3) entered forwarding state
[932656.714486] br-guest: port 3(wlan3) entered disabled state
[932656.869320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready
[932656.876022] br-guest: port 3(wlan3) entered forwarding state
[932656.881921] br-guest: port 3(wlan3) entered forwarding state
[932657.404425] br-lan: port 3(wlan0) entered forwarding state
[932657.854498] br-guest: port 2(wlan2) entered forwarding state
[932658.434436] br-lan: port 2(wlan1) entered forwarding state
[932658.874432] br-guest: port 3(wlan3) entered forwarding state
[932680.425787] br-guest: port 3(wlan3) entered disabled state
[932680.442596] device wlan3 left promiscuous mode
[932680.447279] br-guest: port 3(wlan3) entered disabled state
[932680.467863] br-guest: port 2(wlan2) entered disabled state
[932680.485729] device wlan2 left promiscuous mode
[932680.490436] br-guest: port 2(wlan2) entered disabled state
[932680.505002] device wlan1 left promiscuous mode
[932680.509700] br-lan: port 2(wlan1) entered disabled state
[932680.523775] device wlan0 left promiscuous mode
[932680.528530] br-lan: port 3(wlan0) entered disabled state
[932683.130864] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[932683.169412] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[932683.183967] device wlan0 entered promiscuous mode
[932683.197266] device wlan1 entered promiscuous mode
[932683.813544] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[932683.820249] br-lan: port 2(wlan0) entered forwarding state
[932683.826004] br-lan: port 2(wlan0) entered forwarding state
[932683.841229] device wlan2 entered promiscuous mode
[932683.857367] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[932683.863484] br-guest: port 2(wlan2) entered forwarding state
[932683.869386] br-guest: port 2(wlan2) entered forwarding state
[932684.174365] br-guest: port 2(wlan2) entered disabled state
[932684.265577] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[932684.272265] br-guest: port 2(wlan2) entered forwarding state
[932684.278193] br-guest: port 2(wlan2) entered forwarding state
[932684.868399] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[932684.875079] br-lan: port 3(wlan1) entered forwarding state
[932684.880820] br-lan: port 3(wlan1) entered forwarding state
[932684.905988] device wlan3 entered promiscuous mode
[932684.912111] IPv6: ADDRCONF(NETDEV_UP): wlan3: link is not ready
[932684.918275] br-guest: port 3(wlan3) entered forwarding state
[932684.924142] br-guest: port 3(wlan3) entered forwarding state
[932685.174351] br-guest: port 3(wlan3) entered disabled state
[932685.305978] IPv6: ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready
[932685.312646] br-guest: port 3(wlan3) entered forwarding state
[932685.318582] br-guest: port 3(wlan3) entered forwarding state
[932685.824311] br-lan: port 2(wlan0) entered forwarding state
[932686.274310] br-guest: port 2(wlan2) entered forwarding state
[932686.874321] br-lan: port 3(wlan1) entered forwarding state
[932687.314318] br-guest: port 3(wlan3) entered forwarding state

After running wifi, I am able to connect again.

MAC addresses found in logs:
9c:d6:43:29:cc:18: DAP-2695, wlan0
9e:d6:43:29:cc:18: DAP-2695, wlan2

c0:ee:fb:4a:18:b7: OnePlus 2, Android 6.0.1
b0:df:3a:12:79:80: Samsung SM-T520, Android 5.1.1

26.10.2016 251 Base systemBug ReportHighHigh sending SIGSEGV to dnsmasq for invalid read access from ...TrunkClosed Task Description

it’s a message that shows up frequently on a fresh install of lede’s 4.4.27 on wzr-hp-g300nh → Linux robokoa 4.4.27 #0 Wed Oct 26 10:37:47 2016 mips GNU/Linux – steps to reproduce are unknown, i’m unsure of the initial reason for this error

[28082.882471] do_page_fault(): sending SIGSEGV to dnsmasq for invalid read access from 00000000
[28082.891127] epc = 00439ff1 in busybox[400000+4a000]
[28082.896083] ra = 00439fe5 in busybox[400000+4a000]
[28082.901018]

04.06.2016 2 OtherFeature RequestHighLow Enable email and jabber notifications TrunkClosed Task Description

Set system MTA and Jabber server

18.11.20181958PackagesBug ReportMediumLowuqmi: unicode characters in SMS confuse uqmiTrunkNew Task Description

When using uqmi –get-message the message ends up truncated in case it contains unicode characters like german umlauts.

05.11.2018 1927 Base systemBug ReportMediumLow test bug to test if tags work correctly TrunkClosed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

just a test

10.09.2018 1838 ToolchainBuild FailureMediumHigh e2fsprogs FTBFS on Darwin TrunkClosed Task Description

Following build errors seen on Darwin since bump to e2fsprogs

commit c6a0d57ca98cf61241d386971dd12d6e57671a2d
Author: Daniel Engberg daniel.engberg.lists@pyret.net Date: Wed Aug 29 09:01:54 2018 +0200

  tools/e2fsprogs: Update to 1.44.4
  
  Update e2fsprogs to 1.44.4
  
  Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

n file included from feature.c:20:
In file included from ../../lib/ext2fs/ext2fs.h:97:
../../lib/ext2fs/hashmap.h:20:5: error: function-like macro ‘GNUC_PREREQ’ is not defined
#if
GNUC_PREREQ (4, 8)

  ^

../../lib/ext2fs/hashmap.h:25:5: error: function-like macro ‘GNUC_PREREQ’ is not defined
#if
GNUC_PREREQ (4, 8)

  ^

2 errors generated.
make[6]: * [feature.o] Error 1
make[5]:
* [all-libs-recursive] Error 1
make[4]: *** [all] Error 2

07.09.20181837Base systemBug ReportMediumMediumKernel oops when using wireguard and mangle/fwmarkopenwrt-18.06New Task Description

On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Ethernet interface being the head-unit connected to a VLAN switch.

Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664463] INFO: rcu_sched self-detected stall on CPU
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664907] 	1-...: (5999 ticks this GP) idle=9ee/140000000000001/0 softirq=961867/961867 fqs=2711
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.665571] 	 (t=6000 jiffies g=358062 c=358061 q=4475)
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.665986] NMI backtrace for cpu 1
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666301] CPU: 1 PID: 14102 Comm: kworker/1:0 Not tainted 4.14.63 #0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666775] Hardware name: XXXXXXXXXX
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667240] Workqueue: wg-crypt-XXXXX 0xffffffffa01dbab0 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667891] Call Trace:
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668145]  <IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668372]  0xffffffff8159c6d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668662]  0xffffffff815a0000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668950]  ? 0xffffffff810418d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669251]  0xffffffff815a0060
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669544]  0xffffffff81041924
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669836]  0xffffffff810c22e3
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670128]  0xffffffff810c176f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670421]  ? 0xffffffff8109fe35
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670720]  ? 0xffffffff810a0062
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671020]  0xffffffff810c432a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671309]  0xffffffff810d0f5e
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671599]  0xffffffff810c4c4f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671892]  0xffffffff810c4df6
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672182]  0xffffffff81602392
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672473]  0xffffffff81601a61
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672760]  </IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672994] RIP: 0010:0xffffffff814e7682
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673327] RSP: 0018:ffffc90000cb3a30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673912] RAX: 00000000000001f8 RBX: ffffc90000cb3af8 RCX: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674426] RDX: ffff880077923e00 RSI: 00000000deb48eb9 RDI: ffff88007aa28e68
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674944] RBP: ffffc90000cb3a80 R08: 0000000000000000 R09: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675456] R10: ffff88007aa28e00 R11: 0000000000000001 R12: ffff880077923e00
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675966] R13: ffffc90000cb3a90 R14: ffff8800786e3a00 R15: ffff88007a360000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676484]  0xffffffff814e7a0a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676773]  0xffffffff814e7d89
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677065]  0xffffffff81532536
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677359]  0xffffffffa01800a7 [iptable_mangle@ffffffffa0180000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677845]  0xffffffff814e2966
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678137]  0xffffffff814ed868
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678430]  ? 0xffffffff814ebed0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678725]  0xffffffff814ed897
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679014]  0xffffffff8152b6bb
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679309]  0xffffffffa002145e [udp_tunnel@ffffffffa0021000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679786]  0xffffffffa01ddf81 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680256]  ? 0xffffffff811038aa
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680555]  ? 0xffffffff810c5454
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680854]  0xffffffffa01dbb5a [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681321]  0xffffffff81091cf4
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681613]  0xffffffff8109204b
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681903]  0xffffffff81096d42
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682191]  ? 0xffffffff81091e40
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682487]  ? 0xffffffff81096c30
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682788]  0xffffffff816001ef

Bootlog:

[    0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Wed Aug 15 20:42:39 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f1b2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f1b3000-0x000000007f1fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f1fb000-0x000000007f314fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f315000-0x000000007f324fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f325000-0x000000007f33bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f344000-0x000000007f358fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f359000-0x000000007f359fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f35a000-0x000000007f377fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f378000-0x000000007f37bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f37c000-0x000000007f38afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f38b000-0x000000007f39bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39c000-0x000000007f39dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f39e000-0x000000007f39efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39f000-0x000000007f3ccfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f3cd000-0x000000007f40ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f410000-0x000000007f58efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f6e5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f6e6000-0x000000007f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Medion E1230/E1230, BIOS 208 02/10/2012
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 write-through
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffffffffff400d10]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[    0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[    0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[    0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[    0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[    0.000000] BRK [0x01e0c000, 0x01e0cfff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MEDION)
[    0.000000] ACPI: XSDT 0x000000007F315070 00005C (v01 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007F3236E8 0000F4 (v04 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007F315158 00E58C (v02 MEDION MEDIONAG 00000001 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000007F390F80 000040
[    0.000000] ACPI: APIC 0x000000007F3237E0 000072 (v03 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: SLIC 0x000000007F323858 000176 (v01 MEDION MEDIONAG 00000001 MSFT 00000001)
[    0.000000] ACPI: ECDT 0x000000007F3239D0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x000000007F323A98 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007F323AD8 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x000000007F323B10 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6effff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f1b2fff]
[    0.000000]   node   0: [mem 0x000000007f410000-0x000000007f58efff]
[    0.000000]   node   0: [mem 0x000000007f6e6000-0x000000007f6effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[    0.000000] On node 0 totalpages: 520921
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 516924 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] random: get_random_bytes called from 0xffffffff81cb0b09 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff88007ee00000 s132056 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s132056 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 512744
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2032612K/2083684K available (8200K kernel code, 527K rwdata, 1312K rodata, 1052K init, 420K bss, 51072K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.040000] tsc: Unable to calibrate against PIT
[    0.040000] tsc: using HPET reference calibration
[    0.040000] tsc: Detected 1595.996 MHz processor
[    0.040000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=15959960)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] ACPI: Core revision 20170728
[    0.068326] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.070105] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.070601] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.071425] Disabled fast string operations
[    0.071787] mce: CPU supports 5 MCE banks
[    0.072125] process: using mwait in idle threads
[    0.072500] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.072914] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.073530] Freeing SMP alternatives memory: 28K
[    0.080265] smpboot: Max logical packages: 2
[    0.081106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.190000] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.190000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.190000] ... version:                3
[    0.190000] ... bit width:              40
[    0.190000] ... generic registers:      2
[    0.190000] ... value mask:             000000ffffffffff
[    0.190000] ... max period:             000000007fffffff
[    0.190000] ... fixed-purpose events:   3
[    0.190000] ... event mask:             0000000700000003
[    0.190000] Hierarchical SRCU implementation.
[    0.190000] smp: Bringing up secondary CPUs ...
[    0.190000] x86: Booting SMP configuration:
[    0.190000] .... node  #0, CPUs:      #1
[    0.010000] Disabled fast string operations
[    0.190000]  #2
[    0.010000] Disabled fast string operations
[    0.190386]  #3
[    0.010000] Disabled fast string operations
[    0.193013] smp: Brought up 1 node, 4 CPUs
[    0.193365] smpboot: Total of 4 processors activated (12767.96 BogoMIPS)
[    0.195434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196180] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.197097] NET: Registered protocol family 16
[    0.198390] cpuidle: using governor ladder
[    0.198390] ACPI: bus type PCI registered
[    0.198390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.200004] PCI: Using configuration type 1 for base access
[    0.217580] ACPI: Added _OSI(Module Device)
[    0.217940] ACPI: Added _OSI(Processor Device)
[    0.218293] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218673] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219086] ACPI: EC: EC started
[    0.219370] ACPI: EC: interrupt blocked
[    0.222270] ACPI: \: Used as first EC
[    0.222591] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.223021] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.223763] ACPI: Executed 1 blocks of module-level executable AML code
[    0.240673] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.242268] ACPI: Dynamic OEM Table Load:
[    0.242613] ACPI: SSDT 0xFFFF88007BD5D800 0002E9 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.246636] ACPI: Dynamic OEM Table Load:
[    0.247070] ACPI: SSDT 0xFFFF88007BC81000 0006DB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.254189] ACPI: Dynamic OEM Table Load:
[    0.256660] ACPI: SSDT 0xFFFF88007C6CB000 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.257695] ACPI: Dynamic OEM Table Load:
[    0.260047] ACPI: SSDT 0xFFFF88007C7DE540 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.264783] ACPI: Interpreter enabled
[    0.265199] ACPI: (supports S0 S5)
[    0.265579] ACPI: Using IOAPIC for interrupt routing
[    0.268058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270580] ACPI: GPE 0x02 active on init
[    0.272964] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.305839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305839] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[    0.305839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.306311] PCI host bridge to bus 0000:00
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.306311] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306721] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[    0.310006] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[    0.310006] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[    0.310006] pci 0000:00:02.0: reg 0x14: [io  0xf100-0xf107]
[    0.315634] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.315634] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[    0.315634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.315960] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.315960] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.316454] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.316454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.316867] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.316867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.317285] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.317285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.317706] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.317706] pci 0000:00:1d.0: reg 0x20: [io  0xf0a0-0xf0bf]
[    0.318128] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.318128] pci 0000:00:1d.1: reg 0x20: [io  0xf080-0xf09f]
[    0.318515] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.318515] pci 0000:00:1d.2: reg 0x20: [io  0xf060-0xf07f]
[    0.318938] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.318938] pci 0000:00:1d.3: reg 0x20: [io  0xf040-0xf05f]
[    0.319336] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.319336] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[    0.319336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.320072] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.320513] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.323112] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.323112] pci 0000:00:1f.2: reg 0x10: [io  0xf0f0-0xf0f7]
[    0.323112] pci 0000:00:1f.2: reg 0x14: [io  0xf0e0-0xf0e3]
[    0.323112] pci 0000:00:1f.2: reg 0x18: [io  0xf0d0-0xf0d7]
[    0.323112] pci 0000:00:1f.2: reg 0x1c: [io  0xf0c0-0xf0c3]
[    0.323112] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf02f]
[    0.323112] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[    0.323112] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.323324] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.324155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.324284] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[    0.324284] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x18: [mem 0xdfe11000-0xdfe11fff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x20: [mem 0xdfe10000-0xdfe10fff 64bit]
[    0.324284] pci 0000:02:00.0: supports D1
[    0.324284] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.324922] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.330068] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.330359] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.330469] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.330614] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[    0.332600] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[    0.333006] pci 0000:03:00.0: supports D1 D2
[    0.333011] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.333210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.333620] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.333630] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.333927] pci 0000:04:00.0: [8086:0896] type 00 class 0x028000
[    0.334057] pci 0000:04:00.0: reg 0x10: [mem 0xdfc00000-0xdfc01fff 64bit]
[    0.334763] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.334942] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.335350] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.335528] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.336039] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.336044] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336049] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336053] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.336057] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.336062] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.336066] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[    0.336070] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.336130] pci_bus 0000:00: on NUMA node 0
[    0.337515] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.338262] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.346039] ACPI: EC: interrupt unblocked
[    0.346039] ACPI: EC: event unblocked
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.348684] SCSI subsystem initialized
[    0.349211] libata version 3.00 loaded.
[    0.349211] ACPI: bus type USB registered
[    0.349789] usbcore: registered new interface driver usbfs
[    0.350039] usbcore: registered new interface driver hub
[    0.350749] usbcore: registered new device driver usb
[    0.351384] PCI: Using ACPI for IRQ routing
[    0.351384] PCI: pci_cache_line_size set to 64 bytes
[    0.351384] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f1b3000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f58f000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[    0.352856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.353253] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.355766] clocksource: Switched to clocksource hpet
[    0.356312] pnp: PnP ACPI init
[    0.357109] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.357615] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.357767] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.358214] system 00:01: [io  0x1000-0x1003] has been reserved
[    0.358667] system 00:01: [io  0x1010-0x101f] has been reserved
[    0.359103] system 00:01: [io  0xffff] has been reserved
[    0.359513] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.359952] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.359952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:02: [io  0x06a0-0x06af] has been reserved
[    0.359952] system 00:02: [io  0x06b0-0x06ff] has been reserved
[    0.359952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.359952] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.359952] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:06: [io  0x025d] has been reserved
[    0.359952] system 00:06: [io  0x025c] has been reserved
[    0.359952] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.360167] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.360645] system 00:06: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.361121] system 00:06: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.361592] system 00:06: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.362072] system 00:06: [mem 0xfec28000-0xfec2ffff] has been reserved
[    0.362553] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.363064] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.363263] pnp 00:07: Plug and Play ACPI device, IDs SYN1d1b SYN1d00 SYN0002 PNP0f13 (active)
[    0.363394] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.363524] system 00:09: [io  0x0240-0x0259] has been reserved
[    0.363991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.364879] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[    0.365372] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.365873] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.366363] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.366857] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367408] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.367898] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.368395] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.368805] system 00:0c: [io  0x0400-0x047f] has been reserved
[    0.369252] system 00:0c: [io  0x0500-0x053f] has been reserved
[    0.369693] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.370228] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.370705] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.371182] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.371676] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[    0.372171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372179] pnp: PnP ACPI: found 13 devices
[    0.380957] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.381648] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.381656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.381662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.381681] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.381688] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.381708] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.381726] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.381733] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.381781] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.382273] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.382870] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.383462] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.384060] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.384646] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.385095] pci 0000:00:1c.1: BAR 7: assigned [io  0x3000-0x3fff]
[    0.385545] pci 0000:00:1c.3: BAR 7: assigned [io  0x4000-0x4fff]
[    0.385998] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.386387] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.386830] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.387314] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.387902] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.388285] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.388736] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.389226] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.389817] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.390233] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.390690] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.391180] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.391775] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.392157] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.392608] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.393098] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.393700] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.394103] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.394108] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.394113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394122] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394126] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394131] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394135] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394140] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.394144] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.394149] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.394153] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.394158] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.394162] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.394166] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.394171] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.394175] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.394179] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.394184] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.394188] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.394193] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.394197] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.394202] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394206] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394210] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394215] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394219] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394224] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394458] NET: Registered protocol family 2
[    0.395149] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.395801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.396424] TCP: Hash tables configured (established 16384 bind 16384)
[    0.397028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.397512] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.398146] NET: Registered protocol family 1
[    0.398540] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.401674] PCI: CLS 64 bytes, default 64
[    0.404203] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    0.408673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.411230] io scheduler noop registered
[    0.411556] io scheduler deadline registered (default)
[    0.412180] gpio_it87: Unknown Chip found, Chip 0202 Revision 2
[    0.413720] hv_vmbus: registering driver hv_pci
[    0.414138] hv_vmbus: registering driver hyperv_fb
[    0.414552] intel_idle: MWAIT substates: 0x3020220
[    0.414554] intel_idle: v0.4.1 model 0x36
[    0.415019] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.415333] ACPI: AC Adapter [AC0] (on-line)
[    0.440589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.470262] ACPI: Lid Switch [LID]
[    0.470749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.471442] ACPI: Sleep Button [SLPB]
[    0.471890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.472528] ACPI: Power Button [PWRF]
[    0.474911] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.475996] thermal LNXTHERM:00: registered as thermal_zone0
[    0.476418] ACPI: Thermal Zone [THRM] (63 C)
[    0.477238] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.480090] Non-volatile memory driver v1.3
[    0.483829] loop: module loaded
[    0.484309] Guest personality initialized and is inactive
[    0.484904] VMCI host device registered (name=vmci, major=10, minor=63)
[    0.485403] Initialized host personality
[    0.485993] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[    0.487067] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[    0.488126] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170728/utaddress-247)
[    0.489188] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20170728/utaddress-247)
[    0.490317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.VGA.TCOI) (20170728/utaddress-247)
[    0.491442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.492164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.493231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.495362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.496081] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.497151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.498214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.498935] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.499659] VMware PVSCSI driver - version 1.0.7.0-k
[    0.500186] hv_vmbus: registering driver hv_storvsc
[    0.500738] ahci 0000:00:1f.2: version 3.0
[    0.501106] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.501649] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.502258] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
[    0.504418] scsi host0: ahci
[    0.505055] scsi host1: ahci
[    0.505678] scsi host2: ahci
[    0.506330] scsi host3: ahci
[    0.506778] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[    0.507357] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[    0.507918] ata3: DUMMY
[    0.508159] ata4: DUMMY
[    0.508915] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[    0.509469] hv_vmbus: registering driver hv_netvsc
[    0.509854] Fusion MPT base driver 3.04.20
[    0.510250] Copyright (c) 1999-2008 LSI Corporation
[    0.510709] Fusion MPT SPI Host driver 3.04.20
[    0.511120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.511607] ehci-pci: EHCI PCI platform driver
[    0.512763] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.513192] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.513793] ehci-pci 0000:00:1d.7: debug port 1
[    0.514113] ACPI: Battery Slot [BAT0] (battery present)
[    0.518488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.518522] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[    0.540123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.541063] hub 1-0:1.0: USB hub found
[    0.541418] hub 1-0:1.0: 8 ports detected
[    0.542734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.543221] ohci-pci: OHCI PCI platform driver
[    0.543620] ohci-platform: OHCI generic platform driver
[    0.544568] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.544990] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.546233] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010
[    0.547982] hub 2-0:1.0: USB hub found
[    0.548435] hub 2-0:1.0: 2 ports detected
[    0.549241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.549668] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.550303] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    0.550935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.551899] hub 3-0:1.0: USB hub found
[    0.552349] hub 3-0:1.0: 2 ports detected
[    0.553301] usbcore: registered new interface driver usb-storage
[    0.553955] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.556563] i8042: Detected active multiplexing controller, rev 1.1
[    0.559170] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.559568] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.559965] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.560407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.560808] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.561255] hv_vmbus: registering driver hyperv_keyboard
[    0.561774] rtc_cmos 00:03: RTC can wake from S4
[    0.562370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.562869] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.564393] sdhci: Secure Digital Host Controller Interface driver
[    0.564865] sdhci: Copyright(c) Pierre Ossman
[    0.566006] hidraw: raw HID events driver (C) Jiri Kosina
[    0.566486] hv_vmbus: registering driver hid_hyperv
[    0.566915] usbcore: registered new interface driver usbhid
[    0.567337] usbhid: USB HID core driver
[    0.567684] hv_utils: Registering HyperV Utility Driver
[    0.568088] hv_vmbus: registering driver hv_util
[    0.568454] hv_vmbus: registering driver hv_balloon
[    0.569382] NET: Registered protocol family 10
[    0.570351] Segment Routing with IPv6
[    0.570715] NET: Registered protocol family 17
[    0.571097] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.571999] 8021q: 802.1Q VLAN Support v1.8
[    0.572509] NET: Registered protocol family 40
[    0.573685] microcode: sig=0x30661, pf=0x8, revision=0x10c
[    0.574234] microcode: Microcode Update Driver: v2.2.
[    0.574273] sched_clock: Marking stable (573441123, 0)->(657968060, -84526937)
[    0.575503] registered taskstats version 1
[    0.576740] rtc_cmos 00:03: setting system clock to 2018-09-07 16:15:12 UTC (1536336912)
[    0.584900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.831528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.834278] ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
[    0.834837] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.837583] ata1.00: configured for UDMA/133
[    0.838642] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5
[    0.841240] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.841885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.842433] sd 0:0:0:0: [sda] Write Protect is off
[    0.842862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.843052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.877982]  sda: sda1 sda2
[    0.880409] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.171549] ata2: SATA link down (SStatus 0 SControl 300)
[    1.186977] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[    1.194364] Freeing unused kernel memory: 1052K
[    1.230632] Write protecting the kernel read-only data: 12288k
[    1.235448] Freeing unused kernel memory: 2024K
[    1.252890] Freeing unused kernel memory: 736K
[    1.487895] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[    1.488460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[    1.566812] init: Console is alive
[    1.796421] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    1.821964] pps_core: LinuxPPS API ver. 1 registered
[    1.822364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.823647] PTP clock support registered
[    1.824343] Button Hotplug driver version 0.4.1
[    1.824818] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    1.830753] init: - preinit -
[    1.890124] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.267747] random: jshn: uninitialized urandom read (4 bytes read)
[    2.309827] random: jshn: uninitialized urandom read (4 bytes read)
[    2.316834] random: jshn: uninitialized urandom read (4 bytes read)
[    2.470351] usb 1-7: new high-speed USB device number 4 using ehci-pci
[    2.490506] clocksource: Switched to clocksource tsc
[    2.691721] usb-storage 1-7:1.0: USB Mass Storage device detected
[    2.692832] scsi host4: usb-storage 1-7:1.0
[    3.754161] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.765748] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.433172] urandom_read: 5 callbacks suppressed
[    5.433177] random: jshn: uninitialized urandom read (4 bytes read)
[    5.722679] F2FS-fs (loop0): Mounted with checkpoint version = 1a030d9d
[    5.751832] mount_root: switching to f2fs overlay
[    5.833723] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    5.839672] urandom-seed: Seeding with /etc/urandom.seed
[    5.914891] procd: - early -
[    6.557234] procd: - ubus -
[    6.596946] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.610617] procd: - init -
[    6.950178] kmodloader: loading kernel modules from /etc/modules.d/*
[    6.954303] tun: Universal TUN/TAP device driver, 1.6
[    6.958028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.958547] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.961325] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    6.961834] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.964069] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.426558] Netfilter messages via NETLINK v0.30.
[    7.428839] ip_set: protocol 6
[    7.450984] i2c /dev entries driver
[    7.487885] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    7.488578] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    7.492106] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.492562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.494282] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.898600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.147745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.149259] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000000b000, e8:40:f2:3f:a9:58, XID 00a00000 IRQ 30
[    8.154185] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[    8.155901] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    8.174092] xt_time: kernel timezone is -0000
[    8.411155] Intel(R) Wireless WiFi driver for Linux
[    8.411610] Copyright(c) 2003- 2015 Intel Corporation
[    8.445655] PPP generic driver version 2.4.2
[    8.447497] NET: Registered protocol family 24
[    8.454488] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    8.455168] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUG disabled
[    8.455610] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
[    8.456054] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
[    8.456529] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[    8.501089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.504079] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.792405] r8169 0000:03:00.0 eth0: link down
[   11.792453] r8169 0000:03:00.0 eth0: link down
[   11.903937] random: fast init done
[   13.415479] r8169 0000:03:00.0 eth0: link up
[   30.131354] random: crng init done
07.09.20181836Base systemBug ReportMediumLowKernel oops when using wireguard and mangle/fwmarkTrunkNew Task Description

On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Ethernet interface being the head-unit connected to a VLAN switch.

Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664463] INFO: rcu_sched self-detected stall on CPU
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664907] 	1-...: (5999 ticks this GP) idle=9ee/140000000000001/0 softirq=961867/961867 fqs=2711
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.665571] 	 (t=6000 jiffies g=358062 c=358061 q=4475)
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.665986] NMI backtrace for cpu 1
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666301] CPU: 1 PID: 14102 Comm: kworker/1:0 Not tainted 4.14.63 #0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666775] Hardware name: XXXXXXXXXX
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667240] Workqueue: wg-crypt-XXXXX 0xffffffffa01dbab0 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667891] Call Trace:
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668145]  <IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668372]  0xffffffff8159c6d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668662]  0xffffffff815a0000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668950]  ? 0xffffffff810418d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669251]  0xffffffff815a0060
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669544]  0xffffffff81041924
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669836]  0xffffffff810c22e3
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670128]  0xffffffff810c176f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670421]  ? 0xffffffff8109fe35
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670720]  ? 0xffffffff810a0062
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671020]  0xffffffff810c432a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671309]  0xffffffff810d0f5e
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671599]  0xffffffff810c4c4f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671892]  0xffffffff810c4df6
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672182]  0xffffffff81602392
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672473]  0xffffffff81601a61
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672760]  </IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672994] RIP: 0010:0xffffffff814e7682
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673327] RSP: 0018:ffffc90000cb3a30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673912] RAX: 00000000000001f8 RBX: ffffc90000cb3af8 RCX: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674426] RDX: ffff880077923e00 RSI: 00000000deb48eb9 RDI: ffff88007aa28e68
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674944] RBP: ffffc90000cb3a80 R08: 0000000000000000 R09: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675456] R10: ffff88007aa28e00 R11: 0000000000000001 R12: ffff880077923e00
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675966] R13: ffffc90000cb3a90 R14: ffff8800786e3a00 R15: ffff88007a360000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676484]  0xffffffff814e7a0a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676773]  0xffffffff814e7d89
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677065]  0xffffffff81532536
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677359]  0xffffffffa01800a7 [iptable_mangle@ffffffffa0180000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677845]  0xffffffff814e2966
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678137]  0xffffffff814ed868
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678430]  ? 0xffffffff814ebed0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678725]  0xffffffff814ed897
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679014]  0xffffffff8152b6bb
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679309]  0xffffffffa002145e [udp_tunnel@ffffffffa0021000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679786]  0xffffffffa01ddf81 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680256]  ? 0xffffffff811038aa
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680555]  ? 0xffffffff810c5454
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680854]  0xffffffffa01dbb5a [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681321]  0xffffffff81091cf4
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681613]  0xffffffff8109204b
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681903]  0xffffffff81096d42
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682191]  ? 0xffffffff81091e40
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682487]  ? 0xffffffff81096c30
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682788]  0xffffffff816001ef

Bootlog:

[    0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Wed Aug 15 20:42:39 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f1b2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f1b3000-0x000000007f1fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f1fb000-0x000000007f314fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f315000-0x000000007f324fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f325000-0x000000007f33bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f344000-0x000000007f358fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f359000-0x000000007f359fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f35a000-0x000000007f377fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f378000-0x000000007f37bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f37c000-0x000000007f38afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f38b000-0x000000007f39bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39c000-0x000000007f39dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f39e000-0x000000007f39efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39f000-0x000000007f3ccfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f3cd000-0x000000007f40ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f410000-0x000000007f58efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f6e5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f6e6000-0x000000007f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Medion E1230/E1230, BIOS 208 02/10/2012
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 write-through
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffffffffff400d10]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[    0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[    0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[    0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[    0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[    0.000000] BRK [0x01e0c000, 0x01e0cfff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MEDION)
[    0.000000] ACPI: XSDT 0x000000007F315070 00005C (v01 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007F3236E8 0000F4 (v04 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007F315158 00E58C (v02 MEDION MEDIONAG 00000001 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000007F390F80 000040
[    0.000000] ACPI: APIC 0x000000007F3237E0 000072 (v03 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: SLIC 0x000000007F323858 000176 (v01 MEDION MEDIONAG 00000001 MSFT 00000001)
[    0.000000] ACPI: ECDT 0x000000007F3239D0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x000000007F323A98 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007F323AD8 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x000000007F323B10 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6effff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f1b2fff]
[    0.000000]   node   0: [mem 0x000000007f410000-0x000000007f58efff]
[    0.000000]   node   0: [mem 0x000000007f6e6000-0x000000007f6effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[    0.000000] On node 0 totalpages: 520921
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 516924 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] random: get_random_bytes called from 0xffffffff81cb0b09 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff88007ee00000 s132056 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s132056 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 512744
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2032612K/2083684K available (8200K kernel code, 527K rwdata, 1312K rodata, 1052K init, 420K bss, 51072K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.040000] tsc: Unable to calibrate against PIT
[    0.040000] tsc: using HPET reference calibration
[    0.040000] tsc: Detected 1595.996 MHz processor
[    0.040000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=15959960)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] ACPI: Core revision 20170728
[    0.068326] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.070105] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.070601] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.071425] Disabled fast string operations
[    0.071787] mce: CPU supports 5 MCE banks
[    0.072125] process: using mwait in idle threads
[    0.072500] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.072914] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.073530] Freeing SMP alternatives memory: 28K
[    0.080265] smpboot: Max logical packages: 2
[    0.081106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.190000] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.190000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.190000] ... version:                3
[    0.190000] ... bit width:              40
[    0.190000] ... generic registers:      2
[    0.190000] ... value mask:             000000ffffffffff
[    0.190000] ... max period:             000000007fffffff
[    0.190000] ... fixed-purpose events:   3
[    0.190000] ... event mask:             0000000700000003
[    0.190000] Hierarchical SRCU implementation.
[    0.190000] smp: Bringing up secondary CPUs ...
[    0.190000] x86: Booting SMP configuration:
[    0.190000] .... node  #0, CPUs:      #1
[    0.010000] Disabled fast string operations
[    0.190000]  #2
[    0.010000] Disabled fast string operations
[    0.190386]  #3
[    0.010000] Disabled fast string operations
[    0.193013] smp: Brought up 1 node, 4 CPUs
[    0.193365] smpboot: Total of 4 processors activated (12767.96 BogoMIPS)
[    0.195434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196180] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.197097] NET: Registered protocol family 16
[    0.198390] cpuidle: using governor ladder
[    0.198390] ACPI: bus type PCI registered
[    0.198390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.200004] PCI: Using configuration type 1 for base access
[    0.217580] ACPI: Added _OSI(Module Device)
[    0.217940] ACPI: Added _OSI(Processor Device)
[    0.218293] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218673] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219086] ACPI: EC: EC started
[    0.219370] ACPI: EC: interrupt blocked
[    0.222270] ACPI: \: Used as first EC
[    0.222591] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.223021] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.223763] ACPI: Executed 1 blocks of module-level executable AML code
[    0.240673] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.242268] ACPI: Dynamic OEM Table Load:
[    0.242613] ACPI: SSDT 0xFFFF88007BD5D800 0002E9 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.246636] ACPI: Dynamic OEM Table Load:
[    0.247070] ACPI: SSDT 0xFFFF88007BC81000 0006DB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.254189] ACPI: Dynamic OEM Table Load:
[    0.256660] ACPI: SSDT 0xFFFF88007C6CB000 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.257695] ACPI: Dynamic OEM Table Load:
[    0.260047] ACPI: SSDT 0xFFFF88007C7DE540 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.264783] ACPI: Interpreter enabled
[    0.265199] ACPI: (supports S0 S5)
[    0.265579] ACPI: Using IOAPIC for interrupt routing
[    0.268058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270580] ACPI: GPE 0x02 active on init
[    0.272964] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.305839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305839] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[    0.305839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.306311] PCI host bridge to bus 0000:00
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.306311] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306721] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[    0.310006] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[    0.310006] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[    0.310006] pci 0000:00:02.0: reg 0x14: [io  0xf100-0xf107]
[    0.315634] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.315634] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[    0.315634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.315960] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.315960] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.316454] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.316454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.316867] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.316867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.317285] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.317285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.317706] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.317706] pci 0000:00:1d.0: reg 0x20: [io  0xf0a0-0xf0bf]
[    0.318128] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.318128] pci 0000:00:1d.1: reg 0x20: [io  0xf080-0xf09f]
[    0.318515] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.318515] pci 0000:00:1d.2: reg 0x20: [io  0xf060-0xf07f]
[    0.318938] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.318938] pci 0000:00:1d.3: reg 0x20: [io  0xf040-0xf05f]
[    0.319336] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.319336] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[    0.319336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.320072] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.320513] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.323112] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.323112] pci 0000:00:1f.2: reg 0x10: [io  0xf0f0-0xf0f7]
[    0.323112] pci 0000:00:1f.2: reg 0x14: [io  0xf0e0-0xf0e3]
[    0.323112] pci 0000:00:1f.2: reg 0x18: [io  0xf0d0-0xf0d7]
[    0.323112] pci 0000:00:1f.2: reg 0x1c: [io  0xf0c0-0xf0c3]
[    0.323112] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf02f]
[    0.323112] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[    0.323112] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.323324] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.324155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.324284] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[    0.324284] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x18: [mem 0xdfe11000-0xdfe11fff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x20: [mem 0xdfe10000-0xdfe10fff 64bit]
[    0.324284] pci 0000:02:00.0: supports D1
[    0.324284] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.324922] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.330068] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.330359] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.330469] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.330614] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[    0.332600] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[    0.333006] pci 0000:03:00.0: supports D1 D2
[    0.333011] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.333210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.333620] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.333630] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.333927] pci 0000:04:00.0: [8086:0896] type 00 class 0x028000
[    0.334057] pci 0000:04:00.0: reg 0x10: [mem 0xdfc00000-0xdfc01fff 64bit]
[    0.334763] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.334942] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.335350] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.335528] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.336039] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.336044] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336049] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336053] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.336057] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.336062] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.336066] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[    0.336070] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.336130] pci_bus 0000:00: on NUMA node 0
[    0.337515] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.338262] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.346039] ACPI: EC: interrupt unblocked
[    0.346039] ACPI: EC: event unblocked
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.348684] SCSI subsystem initialized
[    0.349211] libata version 3.00 loaded.
[    0.349211] ACPI: bus type USB registered
[    0.349789] usbcore: registered new interface driver usbfs
[    0.350039] usbcore: registered new interface driver hub
[    0.350749] usbcore: registered new device driver usb
[    0.351384] PCI: Using ACPI for IRQ routing
[    0.351384] PCI: pci_cache_line_size set to 64 bytes
[    0.351384] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f1b3000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f58f000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[    0.352856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.353253] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.355766] clocksource: Switched to clocksource hpet
[    0.356312] pnp: PnP ACPI init
[    0.357109] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.357615] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.357767] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.358214] system 00:01: [io  0x1000-0x1003] has been reserved
[    0.358667] system 00:01: [io  0x1010-0x101f] has been reserved
[    0.359103] system 00:01: [io  0xffff] has been reserved
[    0.359513] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.359952] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.359952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:02: [io  0x06a0-0x06af] has been reserved
[    0.359952] system 00:02: [io  0x06b0-0x06ff] has been reserved
[    0.359952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.359952] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.359952] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:06: [io  0x025d] has been reserved
[    0.359952] system 00:06: [io  0x025c] has been reserved
[    0.359952] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.360167] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.360645] system 00:06: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.361121] system 00:06: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.361592] system 00:06: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.362072] system 00:06: [mem 0xfec28000-0xfec2ffff] has been reserved
[    0.362553] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.363064] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.363263] pnp 00:07: Plug and Play ACPI device, IDs SYN1d1b SYN1d00 SYN0002 PNP0f13 (active)
[    0.363394] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.363524] system 00:09: [io  0x0240-0x0259] has been reserved
[    0.363991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.364879] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[    0.365372] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.365873] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.366363] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.366857] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367408] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.367898] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.368395] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.368805] system 00:0c: [io  0x0400-0x047f] has been reserved
[    0.369252] system 00:0c: [io  0x0500-0x053f] has been reserved
[    0.369693] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.370228] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.370705] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.371182] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.371676] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[    0.372171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372179] pnp: PnP ACPI: found 13 devices
[    0.380957] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.381648] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.381656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.381662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.381681] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.381688] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.381708] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.381726] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.381733] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.381781] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.382273] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.382870] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.383462] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.384060] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.384646] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.385095] pci 0000:00:1c.1: BAR 7: assigned [io  0x3000-0x3fff]
[    0.385545] pci 0000:00:1c.3: BAR 7: assigned [io  0x4000-0x4fff]
[    0.385998] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.386387] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.386830] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.387314] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.387902] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.388285] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.388736] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.389226] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.389817] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.390233] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.390690] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.391180] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.391775] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.392157] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.392608] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.393098] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.393700] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.394103] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.394108] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.394113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394122] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394126] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394131] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394135] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394140] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.394144] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.394149] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.394153] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.394158] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.394162] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.394166] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.394171] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.394175] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.394179] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.394184] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.394188] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.394193] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.394197] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.394202] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394206] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394210] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394215] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394219] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394224] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394458] NET: Registered protocol family 2
[    0.395149] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.395801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.396424] TCP: Hash tables configured (established 16384 bind 16384)
[    0.397028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.397512] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.398146] NET: Registered protocol family 1
[    0.398540] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.401674] PCI: CLS 64 bytes, default 64
[    0.404203] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    0.408673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.411230] io scheduler noop registered
[    0.411556] io scheduler deadline registered (default)
[    0.412180] gpio_it87: Unknown Chip found, Chip 0202 Revision 2
[    0.413720] hv_vmbus: registering driver hv_pci
[    0.414138] hv_vmbus: registering driver hyperv_fb
[    0.414552] intel_idle: MWAIT substates: 0x3020220
[    0.414554] intel_idle: v0.4.1 model 0x36
[    0.415019] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.415333] ACPI: AC Adapter [AC0] (on-line)
[    0.440589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.470262] ACPI: Lid Switch [LID]
[    0.470749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.471442] ACPI: Sleep Button [SLPB]
[    0.471890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.472528] ACPI: Power Button [PWRF]
[    0.474911] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.475996] thermal LNXTHERM:00: registered as thermal_zone0
[    0.476418] ACPI: Thermal Zone [THRM] (63 C)
[    0.477238] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.480090] Non-volatile memory driver v1.3
[    0.483829] loop: module loaded
[    0.484309] Guest personality initialized and is inactive
[    0.484904] VMCI host device registered (name=vmci, major=10, minor=63)
[    0.485403] Initialized host personality
[    0.485993] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[    0.487067] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[    0.488126] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170728/utaddress-247)
[    0.489188] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20170728/utaddress-247)
[    0.490317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.VGA.TCOI) (20170728/utaddress-247)
[    0.491442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.492164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.493231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.495362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.496081] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.497151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.498214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.498935] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.499659] VMware PVSCSI driver - version 1.0.7.0-k
[    0.500186] hv_vmbus: registering driver hv_storvsc
[    0.500738] ahci 0000:00:1f.2: version 3.0
[    0.501106] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.501649] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.502258] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
[    0.504418] scsi host0: ahci
[    0.505055] scsi host1: ahci
[    0.505678] scsi host2: ahci
[    0.506330] scsi host3: ahci
[    0.506778] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[    0.507357] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[    0.507918] ata3: DUMMY
[    0.508159] ata4: DUMMY
[    0.508915] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[    0.509469] hv_vmbus: registering driver hv_netvsc
[    0.509854] Fusion MPT base driver 3.04.20
[    0.510250] Copyright (c) 1999-2008 LSI Corporation
[    0.510709] Fusion MPT SPI Host driver 3.04.20
[    0.511120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.511607] ehci-pci: EHCI PCI platform driver
[    0.512763] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.513192] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.513793] ehci-pci 0000:00:1d.7: debug port 1
[    0.514113] ACPI: Battery Slot [BAT0] (battery present)
[    0.518488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.518522] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[    0.540123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.541063] hub 1-0:1.0: USB hub found
[    0.541418] hub 1-0:1.0: 8 ports detected
[    0.542734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.543221] ohci-pci: OHCI PCI platform driver
[    0.543620] ohci-platform: OHCI generic platform driver
[    0.544568] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.544990] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.546233] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010
[    0.547982] hub 2-0:1.0: USB hub found
[    0.548435] hub 2-0:1.0: 2 ports detected
[    0.549241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.549668] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.550303] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    0.550935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.551899] hub 3-0:1.0: USB hub found
[    0.552349] hub 3-0:1.0: 2 ports detected
[    0.553301] usbcore: registered new interface driver usb-storage
[    0.553955] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.556563] i8042: Detected active multiplexing controller, rev 1.1
[    0.559170] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.559568] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.559965] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.560407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.560808] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.561255] hv_vmbus: registering driver hyperv_keyboard
[    0.561774] rtc_cmos 00:03: RTC can wake from S4
[    0.562370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.562869] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.564393] sdhci: Secure Digital Host Controller Interface driver
[    0.564865] sdhci: Copyright(c) Pierre Ossman
[    0.566006] hidraw: raw HID events driver (C) Jiri Kosina
[    0.566486] hv_vmbus: registering driver hid_hyperv
[    0.566915] usbcore: registered new interface driver usbhid
[    0.567337] usbhid: USB HID core driver
[    0.567684] hv_utils: Registering HyperV Utility Driver
[    0.568088] hv_vmbus: registering driver hv_util
[    0.568454] hv_vmbus: registering driver hv_balloon
[    0.569382] NET: Registered protocol family 10
[    0.570351] Segment Routing with IPv6
[    0.570715] NET: Registered protocol family 17
[    0.571097] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.571999] 8021q: 802.1Q VLAN Support v1.8
[    0.572509] NET: Registered protocol family 40
[    0.573685] microcode: sig=0x30661, pf=0x8, revision=0x10c
[    0.574234] microcode: Microcode Update Driver: v2.2.
[    0.574273] sched_clock: Marking stable (573441123, 0)->(657968060, -84526937)
[    0.575503] registered taskstats version 1
[    0.576740] rtc_cmos 00:03: setting system clock to 2018-09-07 16:15:12 UTC (1536336912)
[    0.584900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.831528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.834278] ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
[    0.834837] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.837583] ata1.00: configured for UDMA/133
[    0.838642] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5
[    0.841240] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.841885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.842433] sd 0:0:0:0: [sda] Write Protect is off
[    0.842862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.843052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.877982]  sda: sda1 sda2
[    0.880409] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.171549] ata2: SATA link down (SStatus 0 SControl 300)
[    1.186977] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[    1.194364] Freeing unused kernel memory: 1052K
[    1.230632] Write protecting the kernel read-only data: 12288k
[    1.235448] Freeing unused kernel memory: 2024K
[    1.252890] Freeing unused kernel memory: 736K
[    1.487895] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[    1.488460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[    1.566812] init: Console is alive
[    1.796421] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    1.821964] pps_core: LinuxPPS API ver. 1 registered
[    1.822364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.823647] PTP clock support registered
[    1.824343] Button Hotplug driver version 0.4.1
[    1.824818] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    1.830753] init: - preinit -
[    1.890124] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.267747] random: jshn: uninitialized urandom read (4 bytes read)
[    2.309827] random: jshn: uninitialized urandom read (4 bytes read)
[    2.316834] random: jshn: uninitialized urandom read (4 bytes read)
[    2.470351] usb 1-7: new high-speed USB device number 4 using ehci-pci
[    2.490506] clocksource: Switched to clocksource tsc
[    2.691721] usb-storage 1-7:1.0: USB Mass Storage device detected
[    2.692832] scsi host4: usb-storage 1-7:1.0
[    3.754161] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.765748] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.433172] urandom_read: 5 callbacks suppressed
[    5.433177] random: jshn: uninitialized urandom read (4 bytes read)
[    5.722679] F2FS-fs (loop0): Mounted with checkpoint version = 1a030d9d
[    5.751832] mount_root: switching to f2fs overlay
[    5.833723] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    5.839672] urandom-seed: Seeding with /etc/urandom.seed
[    5.914891] procd: - early -
[    6.557234] procd: - ubus -
[    6.596946] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.610617] procd: - init -
[    6.950178] kmodloader: loading kernel modules from /etc/modules.d/*
[    6.954303] tun: Universal TUN/TAP device driver, 1.6
[    6.958028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.958547] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.961325] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    6.961834] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.964069] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.426558] Netfilter messages via NETLINK v0.30.
[    7.428839] ip_set: protocol 6
[    7.450984] i2c /dev entries driver
[    7.487885] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    7.488578] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    7.492106] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.492562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.494282] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.898600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.147745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.149259] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000000b000, e8:40:f2:3f:a9:58, XID 00a00000 IRQ 30
[    8.154185] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[    8.155901] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    8.174092] xt_time: kernel timezone is -0000
[    8.411155] Intel(R) Wireless WiFi driver for Linux
[    8.411610] Copyright(c) 2003- 2015 Intel Corporation
[    8.445655] PPP generic driver version 2.4.2
[    8.447497] NET: Registered protocol family 24
[    8.454488] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    8.455168] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUG disabled
[    8.455610] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
[    8.456054] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
[    8.456529] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[    8.501089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.504079] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.792405] r8169 0000:03:00.0 eth0: link down
[   11.792453] r8169 0000:03:00.0 eth0: link down
[   11.903937] random: fast init done
[   13.415479] r8169 0000:03:00.0 eth0: link up
[   30.131354] random: crng init done
13.08.2018 1770 OtherBuild FailureMediumLow FTBFS - Darwin - firmware-utils: add sercomm/netgear to ...TrunkClosed Task Description

Since https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=e5b802b9c2711316e26402669bee9349f4c6ec65

tools/firmware-utils fails to build on Darwin.

01.06.2018 1571 Base systemBug ReportMediumLow netifd does not honor rules when using network.lan.enab ...AllClosed Task Description

Device: ar71xx TP-LINK TL-WR841N/ND v9
Revision: c8fdd0e9c843dd483f6677dc41f7df17313aa3cd

netifd: does not apply network rules after disabling the interface via uci set network.lan.enabled=0 and reenabling it via uci set network.l .enabled=1

Steps to reproduce:

uci set network.guestable=rule
uci set network.guestable.in=lan
uci set network.guestable.lookup='1001'
uci set network.guestable.priority='100'
uci set network.unreach=rule
uci set network.unreach.in=lan
uci set network.unreach.action='unreachable'
uci set network.unreach.priority='110'
uci set network.lan.enabled=1
ubus call network reload
sleep 5
ip ru sho

uci set network.lan.enabled=0
ubus call network reload
sleep 5
uci set network.lan.enabled=1
ubus call network reload
sleep 5
ip ru sho
echo "The rules are missing now"


20.04.2018 1510 Base systemBug ReportMediumLow busybox conflicts with flock TrunkClosed Task Description

OpenWrt master r6735-1a89547957

Collected errors:
 * check_data_file_clashes: Package flock wants to install file /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/root-x86/usr/bin/flock
        But that file is already provided by package  * busybox
 * opkg_install_cmd: Cannot install package flock.
20.04.2018 1509 Base systemBug ReportMediumLow omcproxy no longer builds TrunkClosed Task Description

OpenWrt master r6735-1a89547957

make[6]: Entering directory '/home/build/lede/build_dir/target-x86_64_musl/omcproxy-2017-02-14-1fe6f48f'
[ 11%] Building C object CMakeFiles/omcproxy.dir/src/mrib.c.o
In file included from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/omcproxy-2017-02-14-1fe6f48f/src/omcproxy.h:51:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/omcproxy-2017-02-14-1fe6f48f/src/mrib.c:39:
/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/omcproxy-2017-02-14-1fe6f48f/src/mrib.c:57:34: error: braced-group within expression allowed only inside a function
 static uint32_t ipv4_rtr_alert = cpu_to_be32(0x94040000);
                                  ^
cc1: warning: unrecognized command line option '-Wno-gnu'
08.02.2018 1336 Base systemBug ReportMediumLow netfid: wan6 is starting odhcp6c in a loop indefinite TrunkClosed Task Description

Device: ar71xx_tiny tl-wr841n-v8
OpenWrt version: master r6015-30d3435

Install OpenWrt with sysupgrade -n <> from downloads..
After the reboot it’s running in a loop.

Thu Feb  8 16:28:19 2018 daemon.notice netifd: Interface 'wan6' is now down
Thu Feb  8 16:28:19 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): Usage: odhcp6c [options] <interface>
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851):
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): Feature options:
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-S <time>	Wait at least <time> sec for a DHCP-server (0)
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-N <mode>	Mode for requesting addresses [try|force|none]
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-P <length>	Request IPv6-Prefix (0 = auto)
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-F		Force IPv6-Prefix
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-V <class>	Set vendor-class option (base-16 encoded)
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-u <user-class> Set user-class option string
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-x <opt>:<val>	Add option opt (with value val) in sent packets (cumulative)
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 			Examples of IPv6 address, string and base-16 encoded options:
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 			-x dns:2001:2001::1,2001:2001::2 - option 23
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 			-x 15:office - option 15 (userclass)
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 			-x 0x1f4:ABBA - option 500
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-c <clientid>	Override client-ID (base-16 encoded 16-bit type + value)
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-i <iface-id>	Use a custom interface identifier for RA handling
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-r <options>	Options to be requested (comma-separated)
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-R		Do not request any options except those specified with -r
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-s <script>	Status update script (/usr/sbin/odhcp6c-update)
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-a		Don't send Accept Reconfigure option
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-f		Don't send Client FQDN option
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-k		Don't send a RELEASE when stopping
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-t <seconds>	Maximum timeout for DHCPv6-SOLICIT (120)
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-m <seconds>	Minimum time between accepting RA updates (3)
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-L		Ignore default lifetime for RDNSS records
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851):
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): Invocation options:
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-p <pidfile>	Set pidfile (/var/run/odhcp6c.pid)
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-d		Daemonize
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-e		Write logmessages to stderr
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-v		Increase logging verbosity
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851): 	-h		Show this help
Thu Feb  8 16:28:19 2018 daemon.notice netifd: wan6 (14851):
Thu Feb  8 16:28:19 2018 daemon.notice netifd: Interface 'wan6' is now down
27.10.2017 1119 Base systemBug ReportMediumLow Test issue. TrunkClosed Task Description

This is a test, please ignore.

24.10.2017 1107 PackagesBug ReportMediumLow iperf fails to build on aarch64 with "g++-uc: command n ...TrunkClosed Task Description

iperf fails to build with latest trunk (r5128-15e8e5d7d4):

configure: WARNING: unrecognized options: --disable-nls
configure: loading site script /home/bjonglez/lede/include/site/aarch64
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for aarch64-openwrt-linux-strip... aarch64-openwrt-linux-musl-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether the C++ compiler works... no
configure: error: in `/home/bjonglez/lede/build_dir/target-aarch64_cortex-a53_musl/iperf-2.0.10':
configure: error: C++ compiler cannot create executables
See `config.log' for more details
Makefile:51: recipe for target '/home/bjonglez/lede/build_dir/target-aarch64_cortex-a53_musl/iperf-2.0.10/.configured_68b329da9893e34099c7d8ad5cb9c940' failed
make[3]: *** [/home/bjonglez/lede/build_dir/target-aarch64_cortex-a53_musl/iperf-2.0.10/.configured_68b329da9893e34099c7d8ad5cb9c940] Error 77
make[3]: Leaving directory '/home/bjonglez/lede/package/network/utils/iperf'
package/Makefile:109: recipe for target 'package/network/utils/iperf/compile' failed
make[2]: *** [package/network/utils/iperf/compile] Error 2
make[2]: Leaving directory '/home/bjonglez/lede'
package/Makefile:105: recipe for target '/home/bjonglez/lede/staging_dir/target-aarch64_cortex-a53_musl/stamp/.package_compile' failed
make[1]: *** [/home/bjonglez/lede/staging_dir/target-aarch64_cortex-a53_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/bjonglez/lede'
/home/bjonglez/lede/include/toplevel.mk:207: recipe for target 'world' failed

config.log is full of the following:

./configure: line 3407: g++-uc: command not found

I suspect that iperf is just missing a dependency to package/libs/uclibc++/install, but I couldn’t find out how to add the dependency.

Here is my diffconfig:

CONFIG_TARGET_sunxi=y              
CONFIG_TARGET_sunxi_cortexa53=y    
CONFIG_TARGET_sunxi_cortexa53_Default=y  
CONFIG_OPENSSL_WITH_DEPRECATED=y  
CONFIG_OPENSSL_WITH_EC=y                  
CONFIG_OPENSSL_WITH_NPN=y             
CONFIG_OPENSSL_WITH_PSK=y            
CONFIG_OPENSSL_WITH_SRP=y            
CONFIG_OPENVPN_mbedtls_ENABLE_DEF_AUTH=y
CONFIG_OPENVPN_mbedtls_ENABLE_FRAGMENT=y
CONFIG_OPENVPN_mbedtls_ENABLE_HTTP=y
CONFIG_OPENVPN_mbedtls_ENABLE_LZ4=y
CONFIG_OPENVPN_mbedtls_ENABLE_LZO=y
CONFIG_OPENVPN_mbedtls_ENABLE_MULTIHOME=y
CONFIG_OPENVPN_mbedtls_ENABLE_PF=y
CONFIG_OPENVPN_mbedtls_ENABLE_PORT_SHARE=y
CONFIG_OPENVPN_mbedtls_ENABLE_SERVER=y
CONFIG_OPENVPN_mbedtls_ENABLE_SMALL=y
CONFIG_OPENVPN_mbedtls_ENABLE_SOCKS=y
CONFIG_OPENVPN_nossl_ENABLE_DEF_AUTH=y
CONFIG_OPENVPN_nossl_ENABLE_FRAGMENT=y
CONFIG_OPENVPN_nossl_ENABLE_HTTP=y
CONFIG_OPENVPN_nossl_ENABLE_LZ4=y
CONFIG_OPENVPN_nossl_ENABLE_LZO=y
CONFIG_OPENVPN_nossl_ENABLE_MULTIHOME=y
CONFIG_OPENVPN_nossl_ENABLE_PF=y
CONFIG_OPENVPN_nossl_ENABLE_PORT_SHARE=y
CONFIG_OPENVPN_nossl_ENABLE_SERVER=y
CONFIG_OPENVPN_nossl_ENABLE_SMALL=y
CONFIG_OPENVPN_nossl_ENABLE_SOCKS=y
CONFIG_OPENVPN_openssl_ENABLE_DEF_AUTH=y
CONFIG_OPENVPN_openssl_ENABLE_FRAGMENT=y
CONFIG_OPENVPN_openssl_ENABLE_HTTP=y
CONFIG_OPENVPN_openssl_ENABLE_LZ4=y
CONFIG_OPENVPN_openssl_ENABLE_LZO=y
CONFIG_OPENVPN_openssl_ENABLE_MULTIHOME=y
CONFIG_OPENVPN_openssl_ENABLE_PF=y
CONFIG_OPENVPN_openssl_ENABLE_PORT_SHARE=y
CONFIG_OPENVPN_openssl_ENABLE_SERVER=y
CONFIG_OPENVPN_openssl_ENABLE_SMALL=y
CONFIG_OPENVPN_openssl_ENABLE_SOCKS=y
CONFIG_PACKAGE_bmon=m
CONFIG_PACKAGE_confuse=m
CONFIG_PACKAGE_htop=m
CONFIG_PACKAGE_iftop=m
CONFIG_PACKAGE_iperf=m
CONFIG_PACKAGE_iperf3=m
CONFIG_PACKAGE_kmod-mii=y
CONFIG_PACKAGE_kmod-tun=m
CONFIG_PACKAGE_kmod-udptunnel4=m
CONFIG_PACKAGE_kmod-udptunnel6=m
CONFIG_PACKAGE_kmod-usb-net=y
CONFIG_PACKAGE_kmod-usb-net-asix=y
CONFIG_PACKAGE_kmod-wireguard=m
CONFIG_PACKAGE_liblzo=m
CONFIG_PACKAGE_libmbedtls=m
CONFIG_PACKAGE_libmnl=m
CONFIG_PACKAGE_libncurses=m
CONFIG_PACKAGE_libnl-core=m
CONFIG_PACKAGE_libnl-route=m
CONFIG_PACKAGE_libopenssl=m
CONFIG_PACKAGE_libpcap=m
CONFIG_PACKAGE_openvpn-mbedtls=m
CONFIG_PACKAGE_openvpn-nossl=m
CONFIG_PACKAGE_openvpn-openssl=m
CONFIG_PACKAGE_terminfo=m
CONFIG_PACKAGE_uclibcxx=m
CONFIG_PACKAGE_wireguard=m
CONFIG_PACKAGE_wireguard-tools=m
03.10.2017 1037 PackagesFeature RequestMediumLow netifd: implement point-to-point interface support TrunkClosed Task Description

Several hosting providers, like Hetzner or OVH, assign IP addresses that in a different subnet than the gateway they provide. To properly support this, you need to configure the interface IP as point-to-point with iproute2, like this:

ip addr add x.x.x.x peer y.y.y.y dev ethX

From IP-ADDRESS(8):

peer ADDRESS
       the address of the remote endpoint for pointopoint interfaces.  Again, the ADDRESS may be followed by a slash and a decimal number, encoding the network prefix length. If a peer address is specified,
       the local address cannot have a prefix length. The network prefix is associated with the peer rather than with the local address.

It is possible to work around this with static routes, which is what I have done currently, but it makes bird unhappy, logging this message every 20 seconds:

Tue Oct  3 12:25:19 2017 daemon.err bird4: KRT: Received route 0.0.0.0/0 with strange next-hop 176.31.101.254

See also this thread on the bird ML.

Please implement iproute2 point-to-point interface support in netifd.

30.09.2017 1027 FlysprayBug ReportMediumLow Flyspray returns "451 Temporary local problem" when wri ...TrunkClosed Task Description

After writing a comment on a bug report and hitting “Add comment”, flyspray redirects to a blank page with only this text:

““” Completely unexpected exception: Expected response code 250 but got code “451”, with message “451 Temporary local problem - please try later "
This should never happend, please inform Flyspray Developers
““”

It’s not such a big issue because the comment seems to be posted anyway.

29.09.2017 1023 Base systemBug ReportMediumLow iw does not build on a musl host TrunkClosed Task Description

Trying to build LEDE master on a musl host (Gentoo hardened musl), but iw fails with the following error:

lede@musltoo ~/source $ make package/iw/{clean,compile} V=s   
make[1]: Entering directory '/home/build/lede/source'
make[2]: Entering directory '/home/build/lede/source/package/network/utils/iw'
rm -rf /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9
rm -f /home/build/lede/source/staging_dir/target-mips_24kc_musl/stamp/.iw_installed
rm -f /home/build/lede/source/staging_dir/target-mips_24kc_musl/packages/iw.list /home/build/lede/source/staging_dir/host/packages/iw.list
make[2]: Leaving directory '/home/build/lede/source/package/network/utils/iw'
make[1]: Leaving directory '/home/build/lede/source'
make[1]: Entering directory '/home/build/lede/source'
make[2]: Entering directory '/home/build/lede/source/package/libs/toolchain'
echo "libc" >> /home/build/lede/source/staging_dir/target-mips_24kc_musl/pkginfo/toolchain.default.install
echo "libgcc" >> /home/build/lede/source/staging_dir/target-mips_24kc_musl/pkginfo/toolchain.default.install
echo "libpthread" >> /home/build/lede/source/staging_dir/target-mips_24kc_musl/pkginfo/toolchain.default.install
make[2]: Leaving directory '/home/build/lede/source/package/libs/toolchain'
make[2]: Entering directory '/home/build/lede/source/package/libs/libnl-tiny'
echo "libnl-tiny" >> /home/build/lede/source/staging_dir/target-mips_24kc_musl/pkginfo/libnl-tiny.default.install
make[2]: Leaving directory '/home/build/lede/source/package/libs/libnl-tiny'
make[2]: Entering directory '/home/build/lede/source/package/network/utils/iw'
touch /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/.prepared_eb72e7bd2d8d34df91efb13be197b327_6664517399ebbbc92a37c5bb081b5c53_check
. /home/build/lede/source/include/shell.sh; xzcat /home/build/lede/source/dl/iw-4.9.tar.xz | tar -C /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/.. -xf - 
[ ! -d ./src/ ] || cp -fpR ./src/* /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9

Applying ./patches/001-nl80211_h_sync.patch using plaintext: 
patching file nl80211.h

Applying ./patches/120-antenna_gain.patch using plaintext: 
patching file phy.c

Applying ./patches/200-reduce_size.patch using plaintext: 
patching file Makefile
patching file event.c
patching file info.c
patching file scan.c
patching file util.c
touch /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/.prepared_eb72e7bd2d8d34df91efb13be197b327_6664517399ebbbc92a37c5bb081b5c53
rm -f /home/build/lede/source/staging_dir/target-mips_24kc_musl/stamp/.iw_installed
echo "const char iw_version[] = \"4.9\";" > /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/version.c                                                                                                                         
rm -f /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/version.sh                                                                                                                                                              
touch /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/version.sh                                                                                                                                                              
chmod +x /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/version.sh                                                                                                                                                           
rm -f /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/.configured_*                                                                                                                                                           
touch /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/.configured_68b329da9893e34099c7d8ad5cb9c940                                                                                                                            
rm -f /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/.built                                                                                                                                                                  
touch /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/.built_check                                                                                                                                                            
CFLAGS="-Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro  -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE " CXXFLAGS="-Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro  -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE " LDFLAGS="-L/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/lib -L/home/build/lede/source/staging_dir/target-mips_24kc_musl/lib -L/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/lib -L/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/lib -znow -zrelro " make -j1 -C /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/. AR="mips-openwrt-linux-musl-gcc-ar" AS="mips-openwrt-linux-musl-gcc -c -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro" LD=mips-openwrt-linux-musl-ld NM="mips-openwrt-linux-musl-gcc-nm" CC="mips-openwrt-linux-musl-gcc" GCC="mips-openwrt-linux-musl-gcc" CXX="mips-openwrt-linux-musl-g++" RANLIB="mips-openwrt-linux-musl-gcc-ranlib" STRIP=mips-openwrt-linux-musl-strip OBJCOPY=mips-openwrt-linux-musl-objcopy OBJDUMP=mips-openwrt-linux-musl-objdump SIZE=mips-openwrt-linux-musl-size CROSS="mips-openwrt-linux-musl-" ARCH="mips" CFLAGS="-I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections" LDFLAGS="-L/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/lib -L/home/build/lede/source/staging_dir/target-mips_24kc_musl/lib -L/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/lib -L/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/lib -znow -zrelro -Wl,--gc-sections" NL1FOUND="" NL2FOUND=Y NLLIBNAME="libnl-tiny" LIBS="-lm -lnl-tiny" V=1 ;
make[3]: Entering directory '/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9'
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o iw.o iw.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o genl.o genl.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o event.o event.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o info.o info.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o phy.o phy.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o interface.o interface.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o ibss.o ibss.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o station.o station.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o survey.o survey.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o util.o util.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o ocb.o ocb.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o mesh.o mesh.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o mpath.o mpath.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o mpp.o mpp.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o scan.o scan.c
mips-openwrt-linux-musl-gcc -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include/libnl-tiny -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/usr/include -I/home/build/lede/source/staging_dir/target-mips_24kc_musl/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/home/build/lede/source/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -DCONFIG_LIBNL20 -D_GNU_SOURCE -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9:iw-4.9 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -c -o reg.o reg.c
./version.sh version.c
make[3]: /usr/bin/env bash: Shell program not found
make[3]: *** [Makefile:99: version.c] Error 127
make[3]: Leaving directory '/home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9'
make[2]: *** [Makefile:60: /home/build/lede/source/build_dir/target-mips_24kc_musl/iw-4.9/.built] Error 2
make[2]: Leaving directory '/home/build/lede/source/package/network/utils/iw'
make[1]: *** [package/Makefile:111: package/network/utils/iw/compile] Error 2
make[1]: Leaving directory '/home/build/lede/source'
make: *** [/home/build/lede/source/include/toplevel.mk:209: package/iw/compile] Error 2
18.08.2017 967 Base systemBug ReportMediumLow odhcp: does not honor 'ignore' on the dhcp section lede-17.01Closed Task Description

lede-17.01.2

TpLink wdr4300

uci set dhcp.lan.ignore=1

/etc/init.d/dnsmasq reload
/etc/init.d/odhcpd reload

still get an ipv6 address on br-lan

16.08.2017966Base systemBug ReportMediumLowar71xx: images are not named to their board_namesTrunkNew Task Description

Create an image using the imagebuilder (e.g. ar71xx/generic)

- make PROFILE=ubnt-loco-m-xw image
- the resulting image is than named lede-ar71xx-generic-ubnt-loco-m-xw-squashfs-factory.bin
- but looking into /tmp/sysinfo/board_name it’s called “loco-m-xw”

original reporter: aparcar
Additional reference: https://github.com/aparcar/gsoc17-attended-sysupgrade/issues/26#issuecomment-321918497

30.07.2017 942 PackagesBug ReportMediumHigh openvpn-mbedtls no longer accepts SHA1 certificates AllClosed Task Description

Since the update of mbedtls to version 2.5.1 (in both trunk and lede-17.01), the openvpn client no longer accepts SHA1 certificates.

This gives the following error when the client tries to connect:

  openvpn(client)[1897]: TLS: Initial packet from [AF_INET]XXX:1194, sid=c5d9be97 6dc8ee7f
  openvpn(client)[1897]: VERIFY OK: depth=1, C=FR, ST=XX, L=XX, O=XX, OU=openvpn, CN=openvpn-ca, ??=XX, emailAddress=abuse@XX
  openvpn(client)[1897]: VERIFY ERROR: depth=0, subject=C=FR, ST=XX, L=XX, O=XX, OU=openvpn, CN=server, ??=XX, emailAddress=abuse@XX: The certificate is signed with an unacceptable hash.
  openvpn(client)[1897]: TLS_ERROR: read tls_read_plaintext error: X509 - Certificate verification failed, e.g. CRL, CA or signature check failed
  openvpn(client)[1897]: TLS Error: TLS object -> incoming plaintext read error
  openvpn(client)[1897]: TLS Error: TLS handshake failed

Both the CA cert and the server cert are RSA4096 with SHA1 signature. Strangely, the CA cert is accepted but the server cert is not.

This is similar to  FS#405 , but I think it’s overkill to disallow SHA1 certs: I guess there are lots of servers out there still using SHA1.

23.07.2017 924 Base systemBug ReportMediumLow uml: fail to build with "Missing site config for archit ...TrunkClosed Task Description

I can’t build the uml target using r4619-d72371e42b:

bjonglez@gcc202:~/lede$ ./scripts/diffconfig.sh 
CONFIG_TARGET_uml=y
CONFIG_TARGET_uml_Default=y
CONFIG_TARGET_BOARD="uml"
CONFIG_ALL_KMODS=y

bjonglez@gcc202:~/lede$ make
Checking 'glibc-static'... ok.
ERROR: Missing site config for architecture "" !
       The missing file will cause configure scripts to fail during compilation.
       Please provide a "/home/bjonglez/lede/include/site/" file and restart the build.
Makefile:80: recipe for target 'prereq' failed
make[2]: *** [prereq] Error 1
/home/bjonglez/lede/include/toplevel.mk:187: recipe for target 'prereq' failed
make[1]: *** [prereq] Error 2
/home/bjonglez/lede/include/toplevel.mk:207: recipe for target 'world' failed
make: *** [world] Error 2
15.07.2017 908 KernelBug ReportMediumLow x86: Xen support broken in 17.01.2 and later lede-17.01Closed Task Description

Testing the x86/generic image with Xen 4.5:

  • 17.01.0: works
  • 17.01.1: works
  • 17.01.2: fails to boot
  • latest lede-17.01 r3466-f6907dcc79: fails to boot
  • latest trunk r4553-a89c36b: works

When the kernel fails to boot, xl prints this:

xc: error: elf_xen_note_check: ERROR: Will only load images built for the generic loader or Linux images (Not '' and ''): Invalid kernel
libxl: error: libxl_dom.c:414:libxl__build_pv: xc_dom_parse_image failed: No such file or directory
libxl: error: libxl_create.c:1024:domcreate_rebuild_done: cannot (re-)build domain: -3

It means that the kernel image has no Xen support (or there is an issue with the support).

Given the changes between 17.01.1 and 17.01.2, I think the patch adding PAE support may be responsible.

This was first reported in  FS#787 .

14.07.2017 906 PackagesBug ReportMediumLow perf doesn't build on x86 TrunkClosed Task Description

LEDE master 683e73735ebe64ffdbc55aa0037815e4ae282332 x86/64

make[1]: Entering directory '/home/stijn/Development/LEDE/source'
make[2]: Entering directory '/home/stijn/Development/LEDE/source/package/devel/perf'
rm -rf /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl
rm -f /home/stijn/Development/LEDE/source/bin/targets/x86/64/packages/perf_4.4.74-2_x86_64.ipk
rm -f /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/stamp/.perf_installed
rm -f /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/packages/perf.list /home/stijn/Development/LEDE/source/staging_dir/host/packages/perf.list
make[2]: Leaving directory '/home/stijn/Development/LEDE/source/package/devel/perf'
make[1]: Leaving directory '/home/stijn/Development/LEDE/source'
make[1]: Entering directory '/home/stijn/Development/LEDE/source'
make[2]: Entering directory '/home/stijn/Development/LEDE/source/package/libs/toolchain'
echo "libc" >> /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/pkginfo/toolchain.default.install
echo "libgcc" >> /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/pkginfo/toolchain.default.install
echo "libstdcpp" >> /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/pkginfo/toolchain.default.install
echo "libpthread" >> /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/pkginfo/toolchain.default.install
echo "librt" >> /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/pkginfo/toolchain.default.install
make[2]: Leaving directory '/home/stijn/Development/LEDE/source/package/libs/toolchain'
make[2]: Entering directory '/home/stijn/Development/LEDE/source/package/libs/zlib'
echo "zlib" >> /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/pkginfo/zlib.default.install
make[2]: Leaving directory '/home/stijn/Development/LEDE/source/package/libs/zlib'
make[2]: Entering directory '/home/stijn/Development/LEDE/source/package/libs/gettext'
make[2]: Leaving directory '/home/stijn/Development/LEDE/source/package/libs/gettext'
make[2]: Entering directory '/home/stijn/Development/LEDE/source/package/libs/libiconv'
make[2]: Leaving directory '/home/stijn/Development/LEDE/source/package/libs/libiconv'
make[2]: Entering directory '/home/stijn/Development/LEDE/source/package/devel/binutils'
echo "libbfd" >> /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/pkginfo/binutils.default.install
echo "libopcodes" >> /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/pkginfo/binutils.default.install
echo "objdump" >> /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/pkginfo/binutils.default.install
make[2]: Leaving directory '/home/stijn/Development/LEDE/source/package/devel/binutils'
make[2]: Entering directory '/home/stijn/Development/LEDE/source/package/utils/bzip2'
echo "libbz2" >> /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/pkginfo/bzip2.default.install
make[2]: Leaving directory '/home/stijn/Development/LEDE/source/package/utils/bzip2'
make[2]: Entering directory '/home/stijn/Development/LEDE/source/package/libs/argp-standalone'
make[2]: Leaving directory '/home/stijn/Development/LEDE/source/package/libs/argp-standalone'
make[2]: Entering directory '/home/stijn/Development/LEDE/source/package/libs/elfutils'
echo "libdw" >> /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/pkginfo/elfutils.default.install
echo "libelf1" >> /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/pkginfo/elfutils.default.install
make[2]: Leaving directory '/home/stijn/Development/LEDE/source/package/libs/elfutils'
make[2]: Entering directory '/home/stijn/Development/LEDE/source/package/devel/perf'
touch /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/.prepared_b5b87dd2e8f7ab9635c0cd3762fb0d45_6664517399ebbbc92a37c5bb081b5c53_check
cp -fpR /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/* /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/
touch /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/.prepared_b5b87dd2e8f7ab9635c0cd3762fb0d45_6664517399ebbbc92a37c5bb081b5c53
rm -f /home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/stamp/.perf_installed
(cd /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/./; if [ -x ./configure ]; then find /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/ -name config.guess | xargs -r chmod u+w; find /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/ -name config.guess | xargs -r -n1 cp --remove-destination /home/stijn/Development/LEDE/source/scripts/config.guess; find /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/ -name config.sub | xargs -r chmod u+w; find /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/ -name config.sub | xargs -r -n1 cp --remove-destination /home/stijn/Development/LEDE/source/scripts/config.sub; AR="x86_64-openwrt-linux-musl-gcc-ar" AS="x86_64-openwrt-linux-musl-gcc -c -Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -iremap/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl:perf-target-x86_64_musl -Wformat -Werror=format-security -fstack-protector-strong -D_FORTIFY_SOURCE=2 -Wl,-z,now -Wl,-z,relro" LD=x86_64-openwrt-linux-musl-ld NM="x86_64-openwrt-linux-musl-gcc-nm" CC="x86_64-openwrt-linux-musl-gcc" GCC="x86_64-openwrt-linux-musl-gcc" CXX="x86_64-openwrt-linux-musl-g++" RANLIB="x86_64-openwrt-linux-musl-gcc-ranlib" STRIP=x86_64-openwrt-linux-musl-strip OBJCOPY=x86_64-openwrt-linux-musl-objcopy OBJDUMP=x86_64-openwrt-linux-musl-objdump SIZE=x86_64-openwrt-linux-musl-size CFLAGS="-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -iremap/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl:perf-target-x86_64_musl -Wformat -Werror=format-security -fstack-protector-strong -D_FORTIFY_SOURCE=2 -Wl,-z,now -Wl,-z,relro " CXXFLAGS="-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -iremap/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl:perf-target-x86_64_musl -Wformat -Werror=format-security -fstack-protector-strong -D_FORTIFY_SOURCE=2 -Wl,-z,now -Wl,-z,relro " CPPFLAGS="-I/home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/usr/include -I/home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/include -I/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/usr/include -I/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/fortify -I/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include " LDFLAGS="-L/home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/usr/lib -L/home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/lib -L/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/usr/lib -L/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/lib -znow -zrelro "   ./configure --target=x86_64-openwrt-linux --host=x86_64-openwrt-linux --build=x86_64-pc-linux-gnu --program-prefix="" --program-suffix="" --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/lib --sysconfdir=/etc --datadir=/usr/share --localstatedir=/var --mandir=/usr/man --infodir=/usr/info --disable-nls  ; fi; )
rm -f /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/.configured_*
touch /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/.configured_68b329da9893e34099c7d8ad5cb9c940
rm -f /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/.built
touch /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/.built_check
ARCH="x86" NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_LZMA=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_GTK2=1 NO_LIBAUDIT=1 NO_LIBCRYPTO=1 NO_LIBUNWIND=1 CROSS_COMPILE="x86_64-openwrt-linux-musl-" CC="x86_64-openwrt-linux-musl-gcc" LD="x86_64-openwrt-linux-musl-ld" CFLAGS="-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -iremap/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl:perf-target-x86_64_musl -Wformat -Werror=format-security -fstack-protector-strong -D_FORTIFY_SOURCE=2 -Wl,-z,now -Wl,-z,relro -I/home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/usr/include -I/home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/include -I/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/usr/include -I/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/fortify -I/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include" LDFLAGS="-L/home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/usr/lib -L/home/stijn/Development/LEDE/source/staging_dir/target-x86_64_musl/lib -L/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/usr/lib -L/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/lib -znow -zrelro" V='' WERROR=0 prefix=/usr make  -C /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl -f Makefile.perf --no-print-directory

Auto-detecting system features:
...                         dwarf: [ on  ]
...            dwarf_getlocations: [ on  ]
...                         glibc: [ OFF ]
...                          gtk2: [ OFF ]
...                      libaudit: [ OFF ]
...                        libbfd: [ on  ]
...                        libelf: [ on  ]
...                       libnuma: [ OFF ]
...        numa_num_possible_cpus: [ OFF ]
...                       libperl: [ OFF ]
...                     libpython: [ on  ]
...                      libslang: [ OFF ]
...                     libcrypto: [ on  ]
...                     libunwind: [ OFF ]
...            libdw-dwarf-unwind: [ on  ]
...                          zlib: [ on  ]
...                          lzma: [ OFF ]
...                     get_cpuid: [ on  ]
...                           bpf: [ on  ]

Makefile.config:360: No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev
Makefile.config:569: Python support disabled by user
  PERF_VERSION = 4.9.34
  GEN      common-cmds.h
Warning: x86_64's syscall_64.tbl differs from kernel
  CC       util/alias.o
In file included from util/alias.c:2:0:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/../ui/ui.h:4,
                 from util/cache.h:6,
                 from util/alias.c:1:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/annotate.o
  CC       util/block-range.o
In file included from util/symbol.h:16:0,
                 from util/block-range.h:4,
                 from util/block-range.c:1:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/symbol.h:7,
                 from util/block-range.h:4,
                 from util/block-range.c:1:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/build-id.o
  CC       util/config.o
  CC       util/ctype.o
  CC       util/db-export.o
In file included from util/symbol.h:16:0,
                 from util/evsel.h:10,
                 from util/db-export.c:18:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/symbol.h:7,
                 from util/evsel.h:10,
                 from util/db-export.c:18:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/env.o
In file included from util/env.c:3:0:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/map.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/event.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/debug.h:7,
                 from util/cpumap.h:9,
                 from util/env.c:1:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/event.o
In file included from util/symbol.h:16:0,
                 from util/callchain.h:9,
                 from util/hist.h:6,
                 from util/event.c:6:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/event.c:4:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/evlist.o
  CC       util/evsel.o
In file included from util/symbol.h:16:0,
                 from util/callchain.h:9,
                 from util/evsel.c:19:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/callchain.h:7,
                 from util/evsel.c:19:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/evsel_fprintf.o
In file included from util/symbol.h:16:0,
                 from util/evsel.h:10,
                 from util/evsel_fprintf.c:4:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/symbol.h:7,
                 from util/evsel.h:10,
                 from util/evsel_fprintf.c:4:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/find_bit.o
  CC       util/kallsyms.o
  CC       util/levenshtein.o
  CC       util/llvm-utils.o
In file included from util/llvm-utils.c:13:0:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/debug.h:7,
                 from util/llvm-utils.c:10:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  BISON    util/parse-events-bison.c
  FLEX     util/parse-events-flex.c
  CC       util/parse-events.o
  CC       util/perf_regs.o
  CC       util/path.o
In file included from util/path.c:14:0:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/../ui/ui.h:4,
                 from util/cache.h:6,
                 from util/path.c:13:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/rbtree.o
  CC       util/libstring.o
  CC       util/bitmap.o
  CC       util/hweight.o
  CC       util/quote.o
  CC       util/strbuf.o
In file included from util/strbuf.c:2:0:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/debug.h:7,
                 from util/strbuf.c:1:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/string.o
  CC       util/strlist.o
  CC       util/strfilter.o
  CC       util/top.o
In file included from util/symbol.h:16:0,
                 from util/evsel.h:10,
                 from util/evlist.h:10,
                 from util/top.c:11:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/map.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/event.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/debug.h:7,
                 from util/cpumap.h:9,
                 from util/top.c:9:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/usage.o
  CC       util/dso.o
In file included from util/symbol.h:16:0,
                 from util/dso.c:4:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/symbol.h:7,
                 from util/dso.c:4:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/symbol.o
In file included from util/symbol.h:16:0,
                 from util/annotate.h:7,
                 from util/symbol.c:12:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/symbol.h:7,
                 from util/annotate.h:7,
                 from util/symbol.c:12:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/symbol_fprintf.o
In file included from util/symbol.h:16:0,
                 from util/symbol_fprintf.c:5:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/symbol.h:7,
                 from util/symbol_fprintf.c:5:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/color.o
  CC       util/header.o
  CC       util/callchain.o
In file included from util/symbol.h:16:0,
                 from util/callchain.h:9,
                 from util/hist.h:6,
                 from util/callchain.c:20:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/hist.h:5,
                 from util/callchain.c:20:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/values.o
  CC       util/debug.o
In file included from util/debug.c:15:0:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/../ui/ui.h:4,
                 from util/cache.h:6,
                 from util/debug.c:11:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/machine.o
In file included from util/symbol.h:16:0,
                 from util/callchain.h:9,
                 from util/machine.c:1:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/callchain.h:7,
                 from util/machine.c:1:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/map.o
In file included from util/symbol.h:16:0,
                 from util/map.c:1:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/symbol.h:7,
                 from util/map.c:1:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/pstack.o
  CC       util/session.o
In file included from util/symbol.h:16:0,
                 from util/evsel.h:10,
                 from util/evlist.h:10,
                 from util/session.c:9:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/evlist.h:9,
                 from util/session.c:9:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/ordered-events.o
In file included from util/symbol.h:16:0,
                 from util/session.h:8,
                 from util/ordered-events.c:5:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/session.h:5,
                 from util/ordered-events.c:5:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/comm.o
  CC       util/thread.o
In file included from util/symbol.h:16:0,
                 from util/session.h:8,
                 from util/thread.c:5:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/session.h:5,
                 from util/thread.c:5:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/thread_map.o
  CC       util/trace-event-parse.o
  CC       util/parse-events-flex.o
  CC       util/parse-events-bison.o
  BISON    util/pmu-bison.c
  FLEX     util/pmu-flex.c
  CC       util/pmu.o
  CC       util/pmu-flex.o
  CC       util/pmu-bison.o
  CC       util/trace-event-read.o
In file included from util/trace-event-read.c:36:0:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/trace-event-read.c:30:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/trace-event-info.o
  CC       util/trace-event-scripting.o
  CC       util/trace-event.o
In file included from util/trace-event.c:16:0:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/machine.h:6,
                 from util/trace-event.c:15:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/svghelper.o
  CC       util/sort.o
  CC       util/hist.o
  CC       util/util.o
  CC       util/xyarray.o
  CC       util/cpumap.o
  CC       util/cgroup.o
  CC       util/target.o
  CC       util/rblist.o
  CC       util/intlist.o
  CC       util/vdso.o
  CC       util/counts.o
In file included from util/symbol.h:16:0,
                 from util/evsel.h:10,
                 from util/counts.c:2:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/symbol.h:7,
                 from util/evsel.h:10,
                 from util/counts.c:2:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/stat.o
In file included from util/symbol.h:16:0,
                 from util/evsel.h:10,
                 from util/evlist.h:10,
                 from util/stat.c:3:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/evlist.h:9,
                 from util/stat.c:3:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/stat-shadow.o
In file included from util/symbol.h:16:0,
                 from util/evsel.h:10,
                 from util/stat-shadow.c:2:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/symbol.h:7,
                 from util/evsel.h:10,
                 from util/stat-shadow.c:2:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/record.o
In file included from util/symbol.h:16:0,
                 from util/evsel.h:10,
                 from util/evlist.h:10,
                 from util/record.c:1:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/evlist.h:9,
                 from util/record.c:1:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/srcline.o
In file included from util/srcline.c:8:0:
/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/dso.h:9,
                 from util/srcline.c:7:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/data.o
  CC       util/tsc.o
  CC       util/cloexec.o
In file included from util/cloexec.c:2:0:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from util/cloexec.c:1:0:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/call-path.o
  CC       util/thread-stack.o
In file included from util/symbol.h:16:0,
                 from util/thread.h:9,
                 from util/thread-stack.c:18:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/symbol.h:7,
                 from util/thread.h:9,
                 from util/thread-stack.c:18:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/auxtrace.o
  CC       util/intel-pt-decoder/intel-pt-pkt-decoder.o
  GEN      util/intel-pt-decoder/inat-tables.c
  CC       util/intel-pt-decoder/intel-pt-insn-decoder.o
  CC       util/intel-pt-decoder/intel-pt-log.o
  CC       util/intel-pt-decoder/intel-pt-decoder.o
In file included from util/intel-pt-decoder/intel-pt-decoder.c:27:0:
util/intel-pt-decoder/../util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/intel-pt-decoder/../../ui/ui.h:4,
                 from util/intel-pt-decoder/../cache.h:6,
                 from util/intel-pt-decoder/intel-pt-decoder.c:26:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  LD       util/intel-pt-decoder/libperf-in.o
  LD       util/scripting-engines/libperf-in.o
  CC       util/intel-pt.o
In file included from util/symbol.h:16:0,
                 from util/session.h:8,
                 from util/intel-pt.c:23:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/session.h:5,
                 from util/intel-pt.c:23:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/intel-bts.o
In file included from util/symbol.h:16:0,
                 from util/evsel.h:10,
                 from util/intel-bts.c:25:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/map.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/event.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/debug.h:7,
                 from util/cpumap.h:9,
                 from util/intel-bts.c:23:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/parse-branch-options.o
  CC       util/parse-regs-options.o
  CC       util/term.o
  CC       util/help-unknown-cmd.o
In file included from util/../builtin.h:4:0,
                 from util/help-unknown-cmd.c:5:
util/../util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/../ui/ui.h:4,
                 from util/cache.h:6,
                 from util/help-unknown-cmd.c:1:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/mem-events.o
In file included from util/symbol.h:16:0,
                 from util/mem-events.c:11:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/debug.h:7,
                 from util/mem-events.c:10:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/vsprintf.o
  CC       util/drv_configs.o
In file included from util/symbol.h:16:0,
                 from util/evsel.h:10,
                 from util/evlist.h:10,
                 from util/drv_configs.h:20,
                 from util/drv_configs.c:16:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/evlist.h:9,
                 from util/drv_configs.h:20,
                 from util/drv_configs.c:16:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/bpf-loader.o
In file included from util/symbol.h:16:0,
                 from util/evsel.h:10,
                 from util/evlist.h:10,
                 from util/bpf-loader.h:13,
                 from util/bpf-loader.c:15:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/debug.h:7,
                 from util/bpf-loader.c:14:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/bpf-prologue.o
In file included from util/symbol.h:16:0,
                 from util/evsel.h:10,
                 from util/evlist.h:10,
                 from util/bpf-loader.h:13,
                 from util/bpf-prologue.c:12:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/debug.h:7,
                 from util/bpf-prologue.c:11:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/symbol-elf.o
In file included from util/symbol.h:16:0,
                 from util/symbol-elf.c:8:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/symbol.h:7,
                 from util/symbol-elf.c:8:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/probe-file.o
  CC       util/probe-event.o
  CC       util/probe-finder.o
In file included from util/probe-finder.c:39:0:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/probe-finder.c:35:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/dwarf-aux.o
  CC       util/dwarf-regs.o
  CC       util/unwind-libdw.o
In file included from util/symbol.h:16:0,
                 from util/unwind.h:6,
                 from util/unwind-libdw.c:7:
util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from util/map.h:8,
                 from util/event.h:8,
                 from util/debug.h:7,
                 from util/unwind-libdw.c:6:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       util/zlib.o
  CC       util/demangle-java.o
  CC       util/demangle-rust.o
  CC       util/jitdump.o
util/jitdump.c: In function 'jit_process':
util/jitdump.c:622:3: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]
   fprintf(stderr, "injected: %s (%d)\n", path, ret);
   ^
util/jitdump.c:584:6: note: 'ret' was declared here
  int ret;
      ^
  CC       util/genelf.o
  CC       util/genelf_debug.o
  LD       util/libperf-in.o
  CC       arch/common.o
In file included from arch/common.c:4:0:
arch/../util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/map.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/event.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/debug.h:7,
                 from arch/../util/cpumap.h:9,
                 from arch/../util/env.h:5,
                 from arch/common.h:4,
                 from arch/common.c:3:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       arch/x86/util/header.o
  CC       arch/x86/util/tsc.o
  CC       arch/x86/util/pmu.o
In file included from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/symbol.h:16:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/evsel.h:10,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/pmu.h:7,
                 from arch/x86/util/pmu.c:7:
/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/map.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/symbol.h:7,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/evsel.h:10,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/pmu.h:7,
                 from arch/x86/util/pmu.c:7:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       arch/x86/util/kvm-stat.o
In file included from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/symbol.h:16:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/evsel.h:10,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/kvm-stat.h:5,
                 from arch/x86/util/kvm-stat.c:1:
/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/map.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/symbol.h:7,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/evsel.h:10,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/kvm-stat.h:5,
                 from arch/x86/util/kvm-stat.c:1:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       arch/x86/util/perf_regs.o
  CC       arch/x86/util/group.o
  CC       arch/x86/util/dwarf-regs.o
  CC       arch/x86/util/unwind-libdw.o
In file included from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/symbol.h:16:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/thread.h:9,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/unwind-libdw.h:6,
                 from arch/x86/util/unwind-libdw.c:2:
/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/map.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/event.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/unwind-libdw.h:5,
                 from arch/x86/util/unwind-libdw.c:2:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
  CC       arch/x86/util/auxtrace.o
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:12:0,
                 from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/asm/byteorder.h:4,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/include/uapi/linux/perf_event.h:19,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/header.h:4,
                 from arch/x86/util/auxtrace.c:18:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/swab.h:160:8: error: unknown type name '__always_inline'
 static __always_inline __u16 __swab16p(const __u16 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/swab.h:160:30: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__swab16p'
 static __always_inline __u16 __swab16p(const __u16 *p)
                              ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/swab.h:173:8: error: unknown type name '__always_inline'
 static __always_inline __u32 __swab32p(const __u32 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/swab.h:173:30: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__swab32p'
 static __always_inline __u32 __swab32p(const __u32 *p)
                              ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/swab.h:186:8: error: unknown type name '__always_inline'
 static __always_inline __u64 __swab64p(const __u64 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/swab.h:186:30: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__swab64p'
 static __always_inline __u64 __swab64p(const __u64 *p)
                              ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/swab.h:241:24: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void'
 static __always_inline void __swab32s(__u32 *p)
                        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/swab.h:254:24: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void'
 static __always_inline void __swab64s(__u64 *p)
                        ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/asm/byteorder.h:4:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/include/uapi/linux/perf_event.h:19,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/header.h:4,
                 from arch/x86/util/auxtrace.c:18:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:43:8: error: unknown type name '__always_inline'
 static __always_inline __le64 __cpu_to_le64p(const __u64 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:43:31: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__cpu_to_le64p'
 static __always_inline __le64 __cpu_to_le64p(const __u64 *p)
                               ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:47:8: error: unknown type name '__always_inline'
 static __always_inline __u64 __le64_to_cpup(const __le64 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:47:30: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__le64_to_cpup'
 static __always_inline __u64 __le64_to_cpup(const __le64 *p)
                              ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:51:8: error: unknown type name '__always_inline'
 static __always_inline __le32 __cpu_to_le32p(const __u32 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:51:31: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__cpu_to_le32p'
 static __always_inline __le32 __cpu_to_le32p(const __u32 *p)
                               ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:55:8: error: unknown type name '__always_inline'
 static __always_inline __u32 __le32_to_cpup(const __le32 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:55:30: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__le32_to_cpup'
 static __always_inline __u32 __le32_to_cpup(const __le32 *p)
                              ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:59:8: error: unknown type name '__always_inline'
 static __always_inline __le16 __cpu_to_le16p(const __u16 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:59:31: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__cpu_to_le16p'
 static __always_inline __le16 __cpu_to_le16p(const __u16 *p)
                               ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:63:8: error: unknown type name '__always_inline'
 static __always_inline __u16 __le16_to_cpup(const __le16 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:63:30: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__le16_to_cpup'
 static __always_inline __u16 __le16_to_cpup(const __le16 *p)
                              ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:67:8: error: unknown type name '__always_inline'
 static __always_inline __be64 __cpu_to_be64p(const __u64 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:67:31: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__cpu_to_be64p'
 static __always_inline __be64 __cpu_to_be64p(const __u64 *p)
                               ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:71:8: error: unknown type name '__always_inline'
 static __always_inline __u64 __be64_to_cpup(const __be64 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:71:30: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__be64_to_cpup'
 static __always_inline __u64 __be64_to_cpup(const __be64 *p)
                              ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:75:8: error: unknown type name '__always_inline'
 static __always_inline __be32 __cpu_to_be32p(const __u32 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:75:31: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__cpu_to_be32p'
 static __always_inline __be32 __cpu_to_be32p(const __u32 *p)
                               ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:79:8: error: unknown type name '__always_inline'
 static __always_inline __u32 __be32_to_cpup(const __be32 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:79:30: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__be32_to_cpup'
 static __always_inline __u32 __be32_to_cpup(const __be32 *p)
                              ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:83:8: error: unknown type name '__always_inline'
 static __always_inline __be16 __cpu_to_be16p(const __u16 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:83:31: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__cpu_to_be16p'
 static __always_inline __be16 __cpu_to_be16p(const __u16 *p)
                               ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:87:8: error: unknown type name '__always_inline'
 static __always_inline __u16 __be16_to_cpup(const __be16 *p)
        ^
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/linux/byteorder/little_endian.h:87:30: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__be16_to_cpup'
 static __always_inline __u16 __be16_to_cpup(const __be16 *p)
                              ^
In file included from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/symbol.h:16:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/evsel.h:10,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/pmu.h:7,
                 from arch/x86/util/auxtrace.c:20:
/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/util.h:360:12: warning: redundant redeclaration of 'sched_getcpu' [-Wredundant-decls]
 extern int sched_getcpu(void);
            ^
In file included from /home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/pthread.h:30:0,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/map.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/event.h:8,
                 from /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf/util/include/../../util/header.h:9,
                 from arch/x86/util/auxtrace.c:18:
/home/stijn/Development/LEDE/source/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/include/sched.h:80:5: note: previous declaration of 'sched_getcpu' was here
 int sched_getcpu(void);
     ^
mv: cannot stat 'arch/x86/util/.auxtrace.o.tmp': No such file or directory
make[7]: *** [/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/build/Makefile.build:92: arch/x86/util/auxtrace.o] Error 1
make[6]: *** [/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/build/Makefile.build:134: util] Error 2
make[5]: *** [/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/build/Makefile.build:134: x86] Error 2
make[4]: *** [/home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/build/Makefile.build:134: arch] Error 2
make[3]: *** [Makefile.perf:559: libperf-in.o] Error 2
make[2]: *** [Makefile:85: /home/stijn/Development/LEDE/source/build_dir/target-x86_64_musl/linux-x86_64/linux-4.9.34/tools/perf-target-x86_64_musl/.built] Error 2
make[2]: Leaving directory '/home/stijn/Development/LEDE/source/package/devel/perf'
make[1]: *** [package/Makefile:111: package/devel/perf/compile] Error 2
make[1]: Leaving directory '/home/stijn/Development/LEDE/source'
make: *** [/home/stijn/Development/LEDE/source/include/toplevel.mk:209: package/perf/compile] Error 2
29.06.2017 875 Base systemBug ReportMediumHigh x86: APU1: The network interface of lan & wan changed b ...AllClosed Task Description

Board: pc engines APU 1

In 17.01.1 the apu uses

  • eth0 for wan
  • eth1 for wan

In 17.01.2 the apu uses

  • eth0 for wan
  • eth1 for lan
  • eth2 for lan

Do we want to change this again?
I like the new interface binding. But I really dislike it, that it changed within a minor stable release.

I would like to revert the commit in 17.01. But will be there a 17.01.4 release?

Best,
lynxis

commit 443d705e381ef214191a2a427f3c1b29f4c41456

Add missing APU1 reference to x86 board.d

22.06.2017863KernelBug ReportMediumMediumath9k failure with AP+11s VIFs ("unsupported hw bitrate...lede-17.01Assigned Task Description

A Gluon user reported the following issue, observed on a TL-WR841N v9 (QCA953x). LEDE version is 17.01.2.

Gluon uses AP+11s VIFs, with multicast_rate set to 12000.

The WLAN became unusable (no connection possible, WLAN LED permantently on) after a few hours of operation. Both VIFs were affected. The system recovered on its own after an hour in this state. Unfortunately, I have no information if beacons were still running in the broken state.

After the recovery, the large number of messages like the following were found in the kernel log:

[40085.953696] ath: phy0: unsupported hw bitrate detected 0x73 using 1 Mbit
[40200.844082] ath: phy0: unsupported hw bitrate detected 0x48 using 1 Mbit
[40281.298039] ------------[ cut here ]------------
[40281.303081] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 ieee80211_rx_napi+0x130/0x8b0 [mac80211]()
[40281.315230] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 100 (0x64)
[40281.325023] Modules linked in: iptable_nat ath9k nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 ipt_REJECT ipt_MASQUERADE ebtable_nat ebtable_filter ebtable_broute ath9k_common xt_time xt_tcpudp xt_state xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_LOG xt_CT nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack mac80211 iptable_mangle iptable_filter ip_tables ebtables ebt_vlan ebt_stp ebt_snat ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_ip6 ebt_ip ebt_dnat ebt_arpreply ebt_arp ebt_among ebt_802_3 br_netfilter ath9k_hw ath em_nbyte em_cmp sch_pie em_meta sch_gred sch_teql act_ipt sch_prio em_text sch_codel sch_red sch_fq sch_sfq sch_dsmark act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_htb sch_hfsc batman_adv libcrc32c cfg80211 compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables dummy veth tun act_police cls_basic sch_tbf sch_ingress gpio_button_hotplug crc16 crc32c_generic crypto_hash
[40281.433128] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.71 #0
[40281.440330] Stack : 803e32a4 00000000 00000001 80440000 8042d1dc 8042ce63 803c48ac 00000000
[40281.440330]    804a378c 00000004 00000000 8180e918 00000000 800a7664 803c9fa8 80430000
[40281.440330]    00000003 00000004 803c83b4 81809d5c 00000000 800a55e0 00000002 00000000
[40281.440330]    8042bf70 801f5300 00000000 00000000 00000000 00000000 00000000 00000000
[40281.440330]    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[40281.440330]    ...
[40281.477351] Call Trace:
[40281.479951] [<800a7664>] vprintk_default+0x24/0x30
[40281.484917] [<800a55e0>] printk+0x2c/0x38
[40281.489077] [<801f5300>] serial8250_get_mctrl+0x30/0x54
[40281.494512] [<80081c60>] warn_slowpath_common+0xa0/0xd0
[40281.499949] [<801a772c>] dump_stack+0x14/0x28
[40281.504473] [<80071ea8>] show_stack+0x50/0x84
[40281.509003] [<80081c60>] warn_slowpath_common+0xa0/0xd0
[40281.514543] [<80e25cf0>] ieee80211_rx_napi+0x130/0x8b0 [mac80211]
[40281.520918] [<80081cbc>] warn_slowpath_fmt+0x2c/0x38
[40281.526158] [<80e25cf0>] ieee80211_rx_napi+0x130/0x8b0 [mac80211]
[40281.532495] [<802623ec>] __build_skb+0x48/0xc8
[40281.537148] [<802625d0>] __netdev_alloc_skb+0xd0/0x148
[40281.542477] [<80060bf4>] handle_int+0x134/0x140
[40281.547181] [<80de8388>] ath9k_cmn_rx_skb_postprocess+0x50/0x168 [ath9k_common]
[40281.554852] [<80e88374>] ath_rx_tasklet+0xee8/0xf4c [ath9k]
[40281.560635] [<8006503c>] __bzero+0xa0/0x164
[40281.565012] [<80e88340>] ath_rx_tasklet+0xeb4/0xf4c [ath9k]
[40281.570828] [<80e851b8>] ath9k_tasklet+0x200/0x28c [ath9k]
[40281.576512] [<80084820>] tasklet_action+0x80/0xc8
[40281.581390] [<800841dc>] __do_softirq+0x250/0x298
[40281.586284] [<800a82bc>] generic_handle_irq+0x24/0x3c
[40281.591540] [<8006a9e0>] plat_irq_dispatch+0xd4/0x10c
[40281.596760] [<80060bf4>] handle_int+0x134/0x140
[40281.601447]
[40281.602992] ---[ end trace f41ea26ed5101c02 ]---

Both the numbers in the “unsupported hw bitrate detected” messages and the status→rate_idx values in the WARNINGs are seemingly random.

10.06.2017 837 Base systemFeature RequestMediumLow PROVIDES handling for non-virtual packages TrunkClosed Task Description

The build system should allow adding PROVIDES for existing package names, to facilitate replacing core packages. At the moment, adding such PROVIDES will not lead to the desired dependencies.

Example: ip-tiny and ip-full both provide ip, the generated Kconfig for +ip depends looks like this:

select PACKAGE_ip-tiny if !PACKAGE_ip-full

This would not work if ip-full was just called ip (applying the following patch to show the issue):

diff --git a/package/network/utils/iproute2/Makefile b/package/network/utils/iproute2/Makefile
index 364c1b22a1..d7933ede54 100644
--- a/package/network/utils/iproute2/Makefile
+++ b/package/network/utils/iproute2/Makefile
@@ -39,11 +39,10 @@ $(call Package/iproute2/Default)
  ALTERNATIVES:=200:/sbin/ip:/sbin/ip-tiny
 endef
 
-define Package/ip-full
+define Package/ip
 $(call Package/iproute2/Default)
  TITLE:=Routing control utility (Full)
  VARIANT:=full
- PROVIDES:=ip
  ALTERNATIVES:=300:/sbin/ip:/sbin/ip-full
 endef
 
@@ -120,7 +119,7 @@ define Package/ip-tiny/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ip/ip $(1)/sbin/ip-tiny
 endef
 
-define Package/ip-full/install
+define Package/ip/install
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ip/ip $(1)/sbin/ip-full
 endef
@@ -158,7 +157,7 @@ define Package/devlink/install
 endef
 
 $(eval $(call BuildPackage,ip-tiny))
-$(eval $(call BuildPackage,ip-full))
+$(eval $(call BuildPackage,ip))
 $(eval $(call BuildPackage,tc))
 $(eval $(call BuildPackage,genl))
 $(eval $(call BuildPackage,ip-bridge))

The Kconfig looks like this now:

select PACKAGE_ip

instead of the expected

select PACKAGE_ip if !PACKAGE_ip-tiny

I expect this can be solved by separating the “vdepends” list from the package list, making each package provide itself, and always resolving DEPENDS through vdepends.

08.06.2017 829 Base systemBug ReportMediumLow network.sh incorrectly hardcodes IPv6 address suffix  TrunkClosed Task Description

The current implementation of network_get_ipaddr6() and network_get_ipaddrs6() in /lib/function/network.sh incorrectly assumes “:1” as suffix for the local IPv6 address allocated from the delegated prefix.

The effective local address should be taken from the “local-address” field instead.

01.06.2017 822 Base systemBug ReportMediumHigh busybox (ash) sporadically segfaults running shell scri ...lede-17.01Closed Task Description

I’m often seeing this message in my logs:

[ 2183.499756] do_page_fault(): sending SIGSEGV to dhcpv6.script for invalid read access from 00000000    
[ 2183.509195] epc = 0041efe9 in busybox[400000+4b000]                                                    
[ 2183.514285] ra  = 0041efb1 in busybox[400000+4b000]                                                    

The issue might be a new variant of  FS#251 , which disappeared after a busybox upgrade.

I’m on a recent lede-17.01 version (dfecce60e6e75abf3ea817fe7bf29fd432693f13), with the follow adjustments to busybox:

CONFIG_BUSYBOX_CUSTOM=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS is not set

Hardware: TP-Link TL-WR841ND v9 (QCA9533)

My analysis so far:

Registers:

          zero       at       v0       v1       a0       a1       a2       a3
 R0   00000000 7fcfd4c8 00000000 0090b7c0 00910df4 00910df9 2f2f2f2f bcd0a2f0 
            t0       t1       t2       t3       t4       t5       t6       t7
 R8   fefefeff 80808080 80083c3c 002f3634 7fcf9698 00000000 00000000 77a6e2c0 
            s0       s1       s2       s3       s4       s5       s6       s7
 R16  0090ccc0 7fcf9900 00000004 0040788d 77a64000 77a64000 77a67518 77a68d8c 
            t8       t9       k0       k1       gp       sp       s8       ra
 R24  0045b0e8 77a36d44 00000000 00000000 77a6e2c0 7fcf97d0 00000000 0041efb1 
            sr       lo       hi      bad    cause       pc
      0000f413 00000048 00000013 00000000 00800008 0041efe9 
           fsr      fir
      00000000 00000000 

Disassembly:

Dump of assembler code for function find_command:                                                         
   0x0041ef45 <+0>:     save    a0-a3,232,ra,s0-s1                                                        
   0x0041ef49 <+4>:     move    s1,a1                                                                     
   0x0041ef4b <+6>:     jal     0x449c61 <strchr@mips16plt>                                               
   0x0041ef4f <+10>:    li      a1,47
   0x0041ef51 <+12>:    beqz    v0,0x41ef79 <find_command+52>
   0x0041ef53 <+14>:    li      v0,1
   0x0041ef55 <+16>:    neg     v0
   0x0041ef57 <+18>:    lw      v1,240(sp)
   0x0041ef59 <+20>:    sw      v0,4(s1)
   0x0041ef5b <+22>:    li      v0,2
   0x0041ef5d <+24>:    and     v0,v1
   0x0041ef5f <+26>:    bnez    v0,0x41ef65 <find_command+32>
   0x0041ef61 <+28>:    li      v0,0
   0x0041ef63 <+30>:    b       0x41ef75 <find_command+48>
   0x0041ef65 <+32>:    lw      a0,232(sp)
   0x0041ef67 <+34>:    jal     0x44a441 <stat@mips16plt>
   0x0041ef6b <+38>:    addiu   a1,sp,56
   0x0041ef6d <+40>:    slti    v0,0
   0x0041ef6f <+42>:    bteqz   0x41ef61 <find_command+28>
   0x0041ef71 <+44>:    li      v0,1
   0x0041ef73 <+46>:    neg     v0
   0x0041ef75 <+48>:    sb      v0,0(s1)
   0x0041ef77 <+50>:    b       0x41f1af <find_command+618>
   0x0041ef79 <+52>:    lw      v0,0x41f1b4 <find_command+623>
   0x0041ef7b <+54>:    lw      a0,244(sp)
   0x0041ef7d <+56>:    lw      v0,0(v0)
   0x0041ef7f <+58>:    addiu   v0,124
   0x0041ef81 <+60>:    lw      v0,88(v0)
   0x0041ef83 <+62>:    addiu   v0,5
   0x0041ef85 <+64>:    xor     v0,a0
   0x0041ef87 <+66>:    sltiu   v0,1
   0x0041ef89 <+68>:    move    v1,t8
   0x0041ef8b <+70>:    sw      v1,40(sp)
   0x0041ef8d <+72>:    beqz    v0,0x41efa9 <find_command+100>
   0x0041ef8f <+74>:    lw      v0,240(sp)
   0x0041ef91 <+76>:    li      s0,8
   0x0041ef93 <+78>:    lw      a1,0x41f1b8 <find_command+627>
   0x0041ef95 <+80>:    jal     0x449ba1 <strstr@mips16plt>
   0x0041ef99 <+84>:    or      s0,v0
   0x0041ef9b <+86>:    beqz    v0,0x41efa7 <find_command+98>
   0x0041ef9d <+88>:    lw      v1,240(sp)
   0x0041ef9f <+90>:    li      v0,40
   0x0041efa1 <+92>:    or      v1,v0
   0x0041efa3 <+94>:    sw      v1,240(sp)
   0x0041efa5 <+96>:    b       0x41efa9 <find_command+100>
   0x0041efa7 <+98>:    sw      s0,240(sp)
   0x0041efa9 <+100>:   lw      a0,232(sp)
   0x0041efab <+102>:   jal     0x41a75d <cmdlookup>
   0x0041efaf <+106>:   li      a1,0
   0x0041efb1 <+108>:   move    s0,v0
   0x0041efb3 <+110>:   beqz    v0,0x41efdd <find_command+152>
   0x0041efb5 <+112>:   lb      v0,8(v0)
   0x0041efb7 <+114>:   cmpi    v0,1
   0x0041efb9 <+116>:   bteqz   0x41efc3 <find_command+126>
   0x0041efbb <+118>:   cmpi    v0,2
   0x0041efbd <+120>:   btnez   0x41efc7 <find_command+130>
   0x0041efbf <+122>:   li      v0,32
   0x0041efc1 <+124>:   b       0x41efc9 <find_command+132>
   0x0041efc3 <+126>:   li      v0,4
   0x0041efc5 <+128>:   b       0x41efc9 <find_command+132>
   0x0041efc7 <+130>:   li      v0,8
   0x0041efc9 <+132>:   lw      v1,240(sp)
   0x0041efcb <+134>:   and     v0,v1
   0x0041efcd <+136>:   bnez    v0,0x41efd7 <find_command+146>
   0x0041efcf <+138>:   lbu     v0,9(s0)
   0x0041efd1 <+140>:   beqz    v0,0x41f1a3 <find_command+606>
   0x0041efd5 <+144>:   b       0x41efdd <find_command+152>
   0x0041efd7 <+146>:   li      v0,0
   0x0041efd9 <+148>:   li      s0,0
   0x0041efdb <+150>:   sw      v0,40(sp)
   0x0041efdd <+152>:   jal     0x41b025 <find_builtin>
   0x0041efe1 <+156>:   lw      a0,232(sp)
   0x0041efe3 <+158>:   sw      v0,44(sp)
   0x0041efe5 <+160>:   beqz    v0,0x41f00f <find_command+202>
   0x0041efe7 <+162>:   lw      v0,0(v0)
=> 0x0041efe9 <+164>:   lbu     v1,0(v0)
   0x0041efeb <+166>:   li      v0,2
   0x0041efed <+168>:   and     v0,v1
   0x0041efef <+170>:   bnez    v0,0x41f177 <find_command+562>
   0x0041eff3 <+174>:   lw      v1,240(sp)
   0x0041eff5 <+176>:   li      v0,8
   0x0041eff7 <+178>:   and     v0,v1
   0x0041eff9 <+180>:   beqz    v0,0x41f005 <find_command+192>
   0x0041effb <+182>:   li      v0,32
   0x0041effd <+184>:   and     v0,v1
   0x0041efff <+186>:   beqz    v0,0x41f177 <find_command+562>
   0x0041f003 <+190>:   b       0x41f00f <find_command+202>
   0x0041f005 <+192>:   lw      v0,0x41f1bc <find_command+631>
   0x0041f007 <+194>:   lw      v0,0(v0)
...

As in  FS#251 , the contents of the registers don’t really make sense. Unless I’m overlooking something, it should not be possible for $pc to reach 0x0041efe9 with $ra on 0x0041efb1 (return from cmdlookup); rather, $ra should have the value 0x0041efe3 (return from find_builtin). There are no code paths reaching 0x0041efe9 that don’t call find_builtin.

06.05.2017 763 Base systemBug ReportMediumHigh No IPv4 DHCP address are issued on LAN lede-17.01Closed Task Description

This is a strange one : I installed “LEDE 17.01.1” on a GL-AR150 , and when I plugged into the LAN port, it didn’t give me an IPv4 address. I got in on an IPv6 address and found that /var/etc/dnsmasq.conf.cfg02411c didn’t have a “dhcp-range” entry.

Strange. I did network.lan.ipaddr=192.168.2.1 , and rebooted and it issues IPv4 addresses.

“LEDE 17.01.0” worked fine on this GL-AR150

More strange is that I have another GL-AR150, and it works fine on that. The only difference is that the broken one has a POE module (but that’s on the WAN port).

Supply the following if possible:

- Device problem occurs on

GL-AR150

- Software versions of LEDE release, packages, etc.

“LEDE 17.01.1”

- Steps to reproduce

All I did was install “LEDE 17.01.1” on a GL-AR150.

Here’s a little table of what works and what doesn’t :

"LEDE 17.01.0" on dev0 => works OK
"LEDE 17.01.0" on dev1 => works OK
"LEDE 17.01.1" on dev1 => works OK

"LEDE 17.01.1" on dev0 => no "dhcp-range" in /var/etc/dnsmasq.conf.cfg02411c
"LEDE 17.01.1" on dev0 , network.lan.ipaddr=192.168.2.1 => works OK


03.05.2017 758 Base systemBug ReportMediumLow factory image for ubnt er-x missing lede-17.01Closed Task Description

lede-ramips-mt7621-ubnt-erx-initramfs-factory.tar isn’t part of the released files though it is needed to initially flash the device when still operating the factory firmware.

11.04.2017 704 Base systemBug ReportMediumMedium brcmfmac / Raspberry Pi 3 / wifi not working / adhoc an ...TrunkClosed Task Description

tested with a snapshot-image and a selfcompiled with r3923
wifi in adhoc mode or 80211s-mode ist not working. Messages in
syslog are the same. wifi-scanning works (iw dev wlan0 scan).

root@LEDE:~ :) dmesg | grep -i brcm
[   14.341639] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab
[   14.387220] usbcore: registered new interface driver brcmfmac

root@LEDE:~ wifi
root@LEDE:~ logread
Sun Apr  9 04:04:02 2017 daemon.notice netifd: Interface 'wlan' is now down
Sun Apr  9 04:04:02 2017 daemon.notice netifd: Interface 'wlan' is disabled
Sun Apr  9 04:04:03 2017 daemon.notice netifd: radio0 (5094): command failed: No error information (-524)
Sun Apr  9 04:04:03 2017 daemon.notice netifd: radio0 (5131): command failed: No error information (-524)
Sun Apr  9 04:04:03 2017 daemon.notice netifd: radio0 (5131): command failed: Not supported (-95)
Sun Apr  9 04:04:03 2017 daemon.notice netifd: radio0 (5131): command failed: I/O error (-5)
Sun Apr  9 04:04:03 2017 daemon.notice netifd: radio0 (5131): command failed: Too many open files in system (-23)
Sun Apr  9 04:04:04 2017 daemon.notice netifd: radio0 (5131): command failed: Too many open files in system (-23)
Sun Apr  9 04:04:04 2017 daemon.notice netifd: radio0 (5131): Device setup failed: INTERFACE_CREATION_FAILED
Sun Apr  9 04:04:04 2017 daemon.notice netifd: radio0 (5131): WARNING: Variable 'interfaces' does not exist or is not an array/object

root@LEDE:~ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.country='US'
wireless.radio0.channel='5'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.hwmode='11g'
wireless.@wifi-iface[0]=wifi-iface
wireless.@wifi-iface[0].device='radio0'
wireless.@wifi-iface[0].network='wlan'
wireless.@wifi-iface[0].mode='adhoc'
wireless.@wifi-iface[0].bssid='02:ca:ff:ee:ba:be'
wireless.@wifi-iface[0].macaddr='b8:27:eb:14:63:ea'
wireless.@wifi-iface[0].ssid='ffintern.2GHz'

root@LEDE:~ :) ip address show dev wlan0
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc prio state DOWN group default qlen 1000
    link/ether b8:27:eb:14:63:ea brd ff:ff:ff:ff:ff:ff
    inet 10.63.5.1/8 brd 10.255.255.255 scope global wlan0
       valid_lft forever preferred_lft forever
08.04.2017692Base systemBug ReportMediumMediumWLAN AP not working on RasPi (bcm2710 target)TrunkAssigned Task Description

When flashing the brcm2708 / bcm2710 target the WiFi interface gets stuck in “client mode” and the AP will not be able to be brought up.

Some screenshots and a load of discussion here:
https://forum.lede-project.org/t/ap-mode-radio0-in-raspi-3-always-acts-as-a-client-shows-as-wlan0-in-luci/2885

Two more days of tinkering, wifi-up’ing and -down’ing did not bring me further.
I flashed another Pi3 (to exclude a hardware defect) with the same result.

I tried latest snapshot and stable images.
I am happy to help debug – tell me what you need me to do.

Greetings,
–Thomas

07.04.2017 685 Base systemBug ReportMediumHigh x86: sysupgrade to LEDE lose the configuration TrunkClosed Task Description

Try to update x86_64 from OpenWrt (r48532) to LEDE (r2993).
It will loose all configuration, but the system comes back online with default configuration.

17.03.2017634Base systemBug ReportMediumMediumFactory flashing fails because LEDE filename is too lon...AllNew Task Description

On a TP-Link TL-WR841N v11, flashing LEDE from the web interface of the stock firmware is not possible.

This is caused by a stupid check that refuses filename longer than 64 chars in the web interface. The check is implemented in javascript and returns a cryptic error message like “Please select a file to upload”, as if no file was selected.

The current naming scheme is quite long:

$ echo ‘lede-17.01.0-r3205-59508e3-ar71xx-generic-tl-wr841-v11-squashfs-factory-eu.bin’ | wc -c
79

Shortening the name like the following would decrease the length below 64 chars, and leave some space for a custom suffix (e.g. using EXTRA_IMAGE_NAME in the Imagebuilder):

$ echo ‘lede-17.01.0-ar71xx-tlwr841v11-squashfs-factory-eu.bin’ | wc -c
55

11.03.2017 619 Base systemBug ReportMediumLow mac80211: AP+11s VIFs broken TrunkClosed Task Description

When two VIFs are configured in AP and 11s mode, the 11s interface won’t come up correctly, the channel is unset in the iwinfo output:

# iwinfo
client0   ESSID: "Experimental"
          Access Point: B6:1C:ED:57:10:D0
          Mode: Master  Channel: 1 (2.412 GHz)
          Tx-Power: 16 dBm  Link Quality: unknown/70
          Signal: unknown  Noise: unknown
          Bit Rate: unknown
          Encryption: none
          Type: nl80211  HW Mode(s): 802.11bgn
          Hardware: unknown [Generic MAC80211]
          TX power offset: unknown
          Frequency offset: unknown
          Supports VAPs: yes  PHY name: phy0

mesh0     ESSID: unknown
          Access Point: 00:00:00:00:00:00
          Mode: Mesh Point  Channel: unknown (unknown)
          Tx-Power: 16 dBm  Link Quality: unknown/70
          Signal: unknown  Noise: unknown
          Bit Rate: unknown
          Encryption: unknown
          Type: nl80211  HW Mode(s): 802.11bgn
          Hardware: unknown [Generic MAC80211]
          TX power offset: unknown
          Frequency offset: unknown
          Supports VAPs: yes  PHY name: phy0

As soon as there is a second mesh point and some traffic, the kernel log is spammed with messages like the following:

[   74.509141] ------------[ cut here ]------------
[   74.514193] WARNING: CPU: 0 PID: 10 at compat-wireless-2017-01-31/net/mac80211/ieee80211_i.h:1011 mesh_matches_local+0xb0/0x2f0 [mac80211]()
[   74.527247] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6
 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables gpio_button_hotplug
[   74.586877] CPU: 0 PID: 10 Comm: kworker/u2:2 Not tainted 4.4.52 #0
[   74.593455] Workqueue: phy0 ieee80211_ibss_leave [mac80211]
[   74.599212] Stack : 81803410 81878398 00000088 800a7640 8182eac4 8042ee63 803c5ff4 0000000a
          803f13e4 8187dbec 80430000 800a55bc 00000088 800a7640 803cb6e4 80430000
          00000003 8187dbec 80430000 800955d8 00000088 8187dc24 00000000 801f5800
          00000001 801f5800 80e13adc 81b43e00 81b43f00 70687930 00000000 00000000
          00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
          ...
[   74.636246] Call Trace:
[   74.638788] [<80071eb0>] show_stack+0x50/0x84
[   74.643318] [<80081c4c>] warn_slowpath_common+0xa0/0xd0
[   74.648716] [<80081d04>] warn_slowpath_null+0x18/0x24
[   74.654034] [<80e48d3c>] mesh_matches_local+0xb0/0x2f0 [mac80211]
[   74.660430] [<80e48ef4>] mesh_matches_local+0x268/0x2f0 [mac80211]
[   74.666885]
[   74.668433] ---[ end trace 7ec43a5bea41b571 ]---

The mesh0 interface is shown as NO-CARRIER, and obviously, no connection is possible. No other unusual log messages occur.

The issue affects both master (r3680-0ebc681) and the current HEAD of lede-17.01. The 17.01.0 release was fine, so I expect that something in https://git.lede-project.org/?p=source.git;a=commitdiff;h=703515f889124248480f39d65f8704548cbf1c09 broke this. It is not driver-specific, I got reports for ath9k and mt76.

10.03.2017615KernelBug ReportMediumHighWDS AP: kernel panic under high traffic loadTrunkNew Task Description

I built a WDS bridge with two TL-WR841 v8, running LEDE r3670-154b3a6 from the buildbot snapshots.

When sending a high amount of traffic through the bridge (bidirectional iperf from one computer to another through the bridge), the WDS AP crashes repeatedly (roughly every hour, sometimes it takes a bit longer).

This is possibly related to other WDS issues  FS#447  and FS#608.

AP wireless config:

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'LEDE'
	option encryption 'psk-mixed'
	option key 'XXX'
	option wds '1'

STA wireless config:

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'sta'
	option ssid 'LEDE'
	option encryption 'psk2'
	option key 'XXX'
	option wds '1'

The network configuration is unchanged on both devices (except changing the LAN IP).

Some kernel crashes I obtained with /sys/kernel/debug/crashlog after a crash:


[ 2581.160504] Trap instruction in kernel code[#1]:
[ 2581.165297] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.52 #0
[ 2581.171239] task: 8042ef58 ti: 80428000 task.ti: 80428000
[ 2581.176814] $ 0   : 00000000 804a0000 00000000 fffffffe
[ 2581.182253] $ 4   : 00afc0cc 009f844e 0000007f a0e7c980
[ 2581.187691] $ 8   : 009f849c 00000052 0000004a 01000000
[ 2581.193129] $12   : 80000000 8000004e 00000000 00000002
[ 2581.198559] $16   : 81b27000 80df7000 81a15000 81942f00
[ 2581.203989] $20   : 00000000 00000000 8042a4e0 80d18400
[ 2581.209428] $24   : 00000000 8007d2d4
[ 2581.214866] $28   : 80428000 81809a58 8042a4e0 80272104
[ 2581.220305] Hi    : 00000019
[ 2581.223280] Lo    : 00000000
[ 2581.226272] epc   : 80272128 __dev_queue_xmit+0x2d8/0x4c4
[ 2581.231852] ra    : 80272104 __dev_queue_xmit+0x2b4/0x4c4
[ 2581.237428] Status: 1100f403 KERNEL EXL IE
[ 2581.241785] Cause : 00800034 (ExcCode 0d)
[ 2581.245924] PrId  : 0001974c (MIPS 74Kc)
[ 2581.249972] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT
ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc
nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache
nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter
ip6_tables x_tables gpio_button_hotplug
[ 2581.309535] Process swapper (pid: 0, threadinfo=80428000, task=8042ef58, tls=00000000)
[ 2581.317710] Stack : 80ecf420 8187992c 81809b2c 81879900 81b27068 00000001 80430000 fffffff4
[ 2581.317710]    80ece09c 80ed7000 0000004a 80ed7000 80d18400 80ed7000 00000000 8035b5a4
[ 2581.317710]    00000000 80df7000 00000000 80905e00 80f81000 80430000 80df7000 80271cd0
[ 2581.317710]    80428000 00440002 00000020 0000000e 00000003 80df7000 8042a4e0 00000000
[ 2581.317710]    80d18400 80271718 80430000 803fc6cc 8190af00 80ece090 80430000 80df7000
[ 2581.317710]    ...
[ 2581.354706] Call Trace:
[ 2581.357239] [] __dev_queue_xmit+0x2d8/0x4c4
[ 2581.362495] [] vlan_dev_hard_start_xmit+0x98/0x128
[ 2581.368341] [] dev_hard_start_xmit+0x2a8/0x354
[ 2581.373834] [] __dev_queue_xmit+0x3c0/0x4c4
[ 2581.379068] [] br_dev_queue_push_xmit+0x16c/0x1a0
[ 2581.384828] [] br_forward_finish+0x3c/0xb0
[ 2581.389963] [] __br_forward+0xa8/0x114
[ 2581.394741] [] br_handle_frame_finish+0x4f4/0x550
[ 2581.400500] [] br_handle_frame+0x380/0x418
[ 2581.405662] [] __netif_receive_skb_core+0x42c/0x898
[ 2581.411768] [] ieee80211_attach_ack_skb+0x103c/0x19e8 [mac80211]
[ 2581.418913]
[ 2581.420454]
[ 2581.420454] Code: 02002025  10000014  00008825  00431024  ae020074  1000000f  00008825  8e020000
[ 2581.430831] ---[ end trace 8251bd1741f30e24 ]---
[ 2581.437731] Kernel panic - not syncing: Fatal exception in interrupt

Another one which is a bit different:

[  420.687915] Reserved instruction in kernel code[#1]:
[  420.693066] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.52 #0
[  420.699008] task: 8042ef58 ti: 80428000 task.ti: 80428000
[  420.704583] $ 0   : 00000000 804a0000 00000002 00000002
[  420.710022] $ 4   : 81809e34 00000003 00000000 a0fb5980
[  420.715460] $ 8   : 0179f4bc 000005f2 000005ea 01000000
[  420.720898] $12   : 80000000 800005ee 00000000 772a02c0
[  420.726328] $16   : 81809e34 00000000 80f82420 8179eed2
[  420.731758] $20   : 80d54b40 00000000 80f82000 81809ddc
[  420.737197] $24   : 00000000 8007d2d4                  
[  420.742635] $28   : 80428000 81809d28 00000000 80da2a4c
[  420.748066] Hi    : 00000008
[  420.751041] Lo    : 00000023
[  420.754198] epc   : 80da2a4c ieee80211_sta_uapsd_trigger+0xff4/0x2d7c [mac80211]
[  420.761875] ra    : 80da2a4c ieee80211_sta_uapsd_trigger+0xff4/0x2d7c [mac80211]
[  420.769508] Status: 1100f403	KERNEL EXL IE 
[  420.773864] Cause : 80800028 (ExcCode 0a)
[  420.778004] PrId  : 0001974c (MIPS 74Kc)
[  420.782050] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables gpio_button_hotplug
[  420.841606] Process swapper (pid: 0, threadinfo=80428000, task=8042ef58, tls=00000000)
[  420.849779] Stack : 8086da00 8034a074 00000141 81809e14 00000042 81a18c20 00000003 81a18800
[  420.849779] 	  804c0000 00000000 0000002f 00000080 803c9c94 80dd6e74 80de0000 80dd6e40
[  420.849779] 	  80df9780 80440000 80f81420 8034a304 00000032 81b90010 00000001 00000008
[  420.849779] 	  80fc1380 81809e34 80fa9cc0 000008c9 8086f460 00000008 8086f460 00000000
[  420.849779] 	  00000001 80da5abc 815d1746 80df9780 00000000 8034bc5c 00000003 81a18800
[  420.849779] 	  ...
[  420.886779] Call Trace:
[  420.889373] [<80da2a4c>] ieee80211_sta_uapsd_trigger+0xff4/0x2d7c [mac80211]
[  420.896693] 
[  420.898234] 
[  420.898234] Code: 00402825  0c3687a9  02002025 <1000fe1b> 8ee20000  0c36817d  02402025  0441ff8b  24420012 
[  420.908615] ---[ end trace 2fd42b1e71175ff5 ]---
[  420.915438] Kernel panic - not syncing: Fatal exception in interrupt
09.03.2017609Base systemFeature RequestMediumLowprocd: implement runlevel 1TrunkNew Task Description

Sysupgrade currently kills processes with SIGKILL if they don’t shut down within 3 seconds after the SIGTERM signal. Some processes (e.g. domoticz) can take longer than 3 seconds to properly shut down. As this can potentially corrupt the sqlite database, it should be avoided.

While talking about this on IRC, it was suggested we should implement an “init 1” equivalent in procd. Adding this ticket as a reminder.

08.03.2017607KernelBug ReportMediumLowKernel BUG: Bad page state in process ntpd-hotplugTrunkNew Task Description

While doing wireless benchmarks between two TP-Link WR841 running the latest LEDE, one of them (the AP) showed the stack trace below. It does not seem to impact the behaviour of the system, though: everything seems to work correctly after the stack trace.

The device is TL-WR841N v8, with a snapshot build r3670-154b3a6 (kernel is 4.4.52).

It occurred about one minute after I plugged the WAN port to the Internet, which explains why ntpd-hotplug appears in the log. There was still a heavy amount of wireless traffic (both when I plugged the WAN, and when the stack trace occurred).

Wed Mar  8 22:02:31 2017 kern.alert kernel: [ 1913.427453] BUG: Bad page state in process ntpd-hotplug  pfn:015fa
Wed Mar  8 22:02:31 2017 kern.emerg kernel: [ 1913.433936] page:8102bf40 count:-2130657536 mapcount:16711936 mapping:  (null) index:0xff00ff00
Wed Mar  8 22:02:31 2017 kern.emerg kernel: [ 1913.442939] flags: 0x0()
Wed Mar  8 22:02:31 2017 kern.alert kernel: [ 1913.445561] page dumped because: nonzero _count
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.450237] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_coWed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.509878] CPU: 0 PID: 1501 Comm: ntpd-hotplug Not tainted 4.4.52 #0
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.516549] Stack : 803e49f0 00000000 00000001 80440000 818f16a4 8042ee63 803c5ff4 000005dd
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.516549] 	  804a378c 803d0000 803d0000 803d0000 803d0000 800a7640 803cb6e4 80430000
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.516549] 	  00000003 803d0000 803c9af0 81809d74 803d0000 800a55bc 803d0000 803d0000
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.516549] 	  803d0000 801f5800 00000000 00000000 00000000 00000000 00000000 00000000
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.516549] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.516549] 	  ...
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.553574] Call Trace:
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.556121] [<80071eb0>] show_stack+0x50/0x84
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.560630] [<800d57e4>] bad_page+0xec/0x11c
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.565069] [<800d59b0>] free_pages_prepare+0x19c/0x1f8
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.570474] [<800d6c74>] __free_pages_ok+0x2c/0x31c
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.575554] [<80261278>] __kfree_skb+0x28/0xb0
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.580155] [<8023871c>] ag71xx_tx_packets+0x154/0x2c8
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.585486] [<80239530>] ag71xx_poll+0x6c/0x5c0
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.590203] [<8026f748>] net_rx_action+0x10c/0x2c8
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.595183] [<800841c8>] __do_softirq+0x250/0x298
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.600066] [<8006a9e0>] plat_irq_dispatch+0xd4/0x10c
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.605297] 
Wed Mar  8 22:02:31 2017 kern.warn kernel: [ 1913.606843] Disabling lock debugging due to kernel taint
05.03.2017598Base systemBug ReportMediumLow842nd doesnt flash successful with factory image using ...lede-17.01New Task Description

Device: 842nd v3.1
LEDE: 17.01

Go into recovery tftp mode by pressing first the WPS/Reset button and now connect the power.
The device enters tftp recovery to download via tftp from 192.168.0.66 file (wr842nv3_tp_recovery.bin)

The device *seems* to accept the flash (sorry, no serial to confirm).
On boot, the device doesn’t show leds nor it accepts any packets on ipv6 on any port (ping ff02::1) or ping to 192.168.1.1.

I guess this happens, because the oem flasher doesn’t flash all blocks of the factory image.

To recover from this state:
- flash via tftp recovery
- enter LEDE rescue/recovery
- ssh root@192.168.1.1
- use sysupgrade image

Task:
- confirm this happens also with trunk
- use serial to get more debug

03.03.2017588Base systemBug ReportMediumLowopenvpn-mbedtls crash on mpc85xx with signal 4 (SIGILL)lede-17.01Waiting on reporter Task Description

device: tp-link wdr4900
affected version: lede 17.01 / openvpn-mbedtls - 2.4.0-3

openvpn config:

dev tun-monitoring
remote somehost 1194

ca /etc/openvpn/monitoring-vpn/ca.crt
cert /etc/openvpn/monitoring-vpn/xyz.crt
key /etc/openvpn/monitoring-vpn/xyz.key
tls-auth /etc/openvpn/monitoring-vpn/ta.key 1
remote-cert-tls server

keepalive 10 120
cipher AES-256-CBC
comp-lzo yes

persist-key
persist-tun


03.03.2017 587 Base systemBug ReportMediumLow no wwan with qmi based modem quectel ec20 AllClosed Task Description

uqmi hangs on certain commands resulting in a half-connected wwan connection.

device: apu1d
modem: quectel ec20 / qualcom based
affected versions: lede 17.01, trunk

good uqmi version: 2016-08-23-eb1dec7d0dc283a7f61aa574a443a0ab61f8793f
bad uqmi version: 2016-12-19-8ceeab69-1

 1553 root      3288 S    {qmi.sh} /bin/sh ./qmi.sh qmi setup lte {"ifname":"wwan0","proto":"qmi","apn":"internet","
 1620 root      9024 S    uqmi -s -d /dev/cdc-wdm0 --wda-set-data-format 802.3
 1817 root      3072 S    grep qmi
config interface 'lte'
	option ifname 'wwan0'
	option proto 'qmi'
	option apn 'internet'
	option device '/dev/cdc-wdm0'
	option dhcp '1'
01.03.2017 572 Base systemBuild FailureMediumLow OpenSSL STAMP_CONFIGURED can lead to filename too long TrunkClosed Task Description

Build OpenSSL with the default set of options, the STAMP_CONFIGURED line can result in the following:

rm -f /home/fainelli/dev/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/openssl-1.0.2k/.configured_*
touch /home/fainelli/dev/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/openssl-1.0.2k/.configured_bc7334694fa4b40acb40d6b11be8a816_shared_no-err_no-sse2_no-ssl2_no-ssl2-method_no-heartbeats_no-engines_no-ec2m_no-ssl3_no-ssl3-method_no-hw_no-dtls_no-comp_no-sse2
touch: cannot touch ‘/home/fainelli/dev/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/openssl-1.0.2k/.configured_bc7334694fa4b40acb40d6b11be8a816_shared_no-err_no-sse2_no-ssl2_no-ssl2-method_no-heartbeats_no-engines_no-ec2m_no-ssl3_no-ssl3-method_no-hw_no-dtls_no-comp_no-sse2’: File name too long
Makefile:258: recipe for target ‘/home/fainelli/dev/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/openssl-1.0.2k/.configured_bc7334694fa4b40acb40d6b11be8a816_shared_no-err_no-sse2_no-ssl2_no-ssl2-method_no-heartbeats_no-engines_no-ec2m_no-ssl3_no-ssl3-method_no-hw_no-dtls_no-comp_no-sse2’ failed

Which is a filename too long for “touch” from Ubuntu 16.10, coreutils-8.25-2ubuntu2.

OpenSSL .config:

fainelli@fainelli-laptop:[~/../trunk]$ grep -i openssl .config
# CONFIG_BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL is not set
CONFIG_PACKAGE_libopenssl=m
CONFIG_OPENSSL_WITH_EC=y
# CONFIG_OPENSSL_WITH_EC2M is not set
# CONFIG_OPENSSL_WITH_SSL3 is not set
CONFIG_OPENSSL_WITH_DEPRECATED=y
# CONFIG_OPENSSL_WITH_DTLS is not set
# CONFIG_OPENSSL_WITH_COMPRESSION is not set
CONFIG_OPENSSL_WITH_NPN=y
CONFIG_OPENSSL_WITH_PSK=y
CONFIG_OPENSSL_WITH_SRP=y
# CONFIG_OPENSSL_HARDWARE_SUPPORT is not set
# CONFIG_OPENSSL_ENGINE_CRYPTO is not set
# CONFIG_PACKAGE_libevent2-openssl is not set
# CONFIG_PACKAGE_libustream-openssl is not set
# CONFIG_PACKAGE_openvpn-openssl is not set
CONFIG_PACKAGE_openssl-util=m

18.02.2017 531 WebsiteBug ReportMediumMedium dokuwiki: login with github returns 404 AllClosed Task Description

Try to login via github:
1. https://lede-project.org/ click on login via github
2. authenticate on github
3. when redirected back to lede-project.org, you receive 404 Error

15.02.2017 516 Base systemBug ReportMediumMedium procd doesn't wait for a process to quit during restart TrunkClosed Task Description

Some software takes some time to do a clean shutdown, but procd doesn’t wait for a process to quit during restart. This can cause several problems, one of them being the new process unable to bind to the socket because the old process still has it open.

Wed Feb 15 01:41:52 2017 daemon.info domoticz: Domoticz is exiting...
Wed Feb 15 01:41:52 2017 daemon.notice domoticz: Closing application!...
Wed Feb 15 01:41:52 2017 daemon.notice domoticz: Stopping worker...
Wed Feb 15 01:41:52 2017 daemon.notice domoticz: RxQueue: queue worker stopped...
Wed Feb 15 01:41:52 2017 daemon.notice domoticz: WebServer(HTTP) stopped
Wed Feb 15 01:41:52 2017 daemon.info domoticz: Domoticz is starting up....
Wed Feb 15 01:41:52 2017 daemon.info domoticz: Domoticz running...
Wed Feb 15 01:41:52 2017 daemon.notice domoticz: EventSystem: reset all events...
Wed Feb 15 01:41:52 2017 daemon.notice domoticz: WebServer(HTTP) started on address: :: with port 8080
Wed Feb 15 01:41:52 2017 daemon.notice domoticz: Proxymanager started.
Wed Feb 15 01:41:52 2017 daemon.err domoticz: Error: Exception starting shared server: bind: Address in use

It seems procd simply does not support this basic feature, so this should be implemented and I’d say this should even be default behavior.

Showing tasks 1 - 50 of 2058 Page 1 of 421 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing