OpenWrt/LEDE Project

Welcome to the OpenWrt Project bug reporting and issue tracking system

Problems to be reported here are for the current OpenWrt and legacy LEDE Project’s targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to openwrt-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeveritySummary  descReported InStatus
18.11.20181958PackagesBug ReportMediumLowuqmi: unicode characters in SMS confuse uqmiTrunkNew Task Description

When using uqmi –get-message the message ends up truncated in case it contains unicode characters like german umlauts.

27.05.20203129Base systemBug ReportVery LowCriticalUQMI won’t connect with Private APNTrunkUnconfirmed Task Description

UQMI won’t connect with Private APN
Hey Folks,

I have a Problem with the QMI protocol.

I bought a private ip from my ISP and can’t connect with the private APN, only the dynamic IP APN works.

With ModemManager the connection to my Private APN works as expected, so no fault on ISP side.
With crosscompile Quectel-cm to OpenWRT, the connection with qmi protocol to my Private APN works as expected, so no fault on ISP side.

 


29.03.20213711PackagesBuild FailureVery LowLowuqmi documentation errata? pdh on stop-networkTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

So, i was trying to understand how-to disable –autoconnect because i made a mistake, using the wrong APN.

I was following this tutorial:

https://openwrt.org/docs/guide-user/network/wan/wwan/ltedongle

And there is no place where it explains how-to disable autoconnect... I tried to edit the wiki, to add some informations, and to remove that option.. and I couldn’t login using github as a service (error on the openwrt website!

Anyway.. trying to read the documentation of uqmi.. i get this text:

–stop-network <pdh>: Stop network connection (use with option below)

  1. -autoconnect: Disable automatic connect/reconnect

Which makes me wonder, what is pdh?
Well, pdh is not documented.. at least on the whole openwrt website:

https://openwrt.org/docs/guide-user/network/wan/wwan/ltedongle?q=pdh&do=search

i mean this is not a rant, is really, can all this be fixed, so we have better software? :D

thank you guyz, awesome stuff!

12.11.20181946PackagesBug ReportVery LowLowuqmi --set-data-format does nothingTrunkUnconfirmed Task Description

Investigating commands.c file I’ve found that cmd_ctl_set_data_format_prepare (executed on –set-data-format option) sends zeroed ‘struct qmi_ctl_set_data_format_request sreq’ (command.c lines 149 to 163) to the modem so that operation does not affect modem’s behavior any way.

26.04.20203051PackagesBug ReportVery LowHighUPnP not workingAllUnconfirmed Task Description

Device: Linksys WRT1900ACSv2
Software versions: v19.07.9 and v19.07.2
Current Openwrt firmware: OpenWrt SNAPSHOT r13046-df27e949fb / LuCI Master git-20.113.57176-dc1d2ce
Affected Packages: miniupnpd, luci-app-upnp

I have flashed two versions of OpenWrt v19.07.2, one compiled by myself and the other using the official stable release from the website. On both versions I have then installed the latest version of the LuCI-app-UPnP which includes the miniupnpd daemon.

The problem is UPnP seems to very intermittent of how it picks up the ports from the devices. Some devices and applications show up under the `Active UPnP Redirects` and some don’t at all. My primary testing device is my Sony PS3 and PS4 which requires UPnP to open up ports for an optimal online gaming experience. A common port that I reply on is UDP 3074 that is used by Call of Duty games to achieve open NAT type.

When I was running OpenWrt v18.06.5 at the time in 2019 everything worked perfectly including UPnP. When v19.07.0 was officially released for stable use, I noticed I was getting moderate NAT type within my games. With this in mind I checked the luci-upnp app and noticed that my PS4’s IP address/hostname and the corresponding UDP 3074 was not listed. Sometimes I could get the PS4 to be picked up via the Sony PlayStation network test which would open up UDP port 9308 on LuCI-app-UPnP.

I have opened a couple of OpenWrt forum threads discussing UPnP not working:

The only working version of miniupnpd/luci-app-upnp seems to be miniupnpd 2.1-1 which I have had working on all the v19.07.* firmwares. OpenWrt v19.07.0 shipped with miniupnpd 2.1.20190408-2 and this was the point where it broke. Recently testing with the newer v19.07.2 firmware the miniupnpd has been updated to version 2.1.20191006 and this is the same story whereby the PS3/PS4 can’t be picked up.

Interestingly I did some experimenting and took the files, patches and makefile from the master trunk, replaced `PKG_VERSION:-2.1.20191006` with `PKG_VERSION:-2.1.20200329` in the `makefile` (which is the very latest version of the MiniUPnP daemon source code found at https://miniupnp.tuxfamily.org/files), compiled v19.07.2 and flashed it to my router. I then did a Sony PlayStation network test on my PS4 and UDP port 9308 was listed under `Active UPnP Redirects`. I then proceeded onto Call of Duty Modern Warfare (2019) and UDP port 3074 also appeared! However, I still had moderate NAT type which meant the firewall wasn’t opening up somewhere. After clicking the `Delete` button on the LuCI UPnP page and opening the port manually on the firewall the game did give me open NAT type as expected. Weirdly though, the UPnP listing came back which has never happened any time I’ve used OpenWrt with manual port forwards. In other words if I open a port manually in the firewall UPnP will never list same port and destination device in the `Active UPnP Redirects` list.

20.01.20213581KernelBug ReportVery LowCriticalUpload speed regression when connected 100Mbps Lan cabl...openwrt-19.07Unconfirmed Task Description

OpenWRT 19.07.6 And Trunk

When connected 100 Mbps cable into WAN port i have upload speed regression (Speedtest and iperf3)

Regression on 1 Gbs Lan, 2.4 and 5GHz clients. If i changed lan port on lan card to 100Mbs FD - no regression оn this client, but i see it on other 1Gbs lan cliens and wireless.

There is no upload speed regression when connected 1Gbs cable into Wan port. There is no probem on stock firmware

Rus.

Деградация скорости отдачи на проводных гигабитных клиентах и на Wifi ,если в Wan порт подключен 100 мегабитный кабель. Если на конкретном проводном клиенте переключить порт на 100 Мбит полный дуплекс-регрессия на нем пропадает, но сохраняется на Wifi.
Деградация скорости не наблюдается при подключении гигабитного кабеля в Wan порт. На стоке проблемы нет.


03.03.20213658Base systemBug ReportVery LowMediumUpgrade from 19.07.6 to 19.07.7 is only working partial...openwrt-19.07Unconfirmed Task Description

This occurred to me when trying to upgrade one of my “TP-Link TL-WR842N/ND v2” from 19.07.6 to 19.07.7.
I used following file to flash through /cgi-bin/luci/admin/system/flash:
https://downloads.openwrt.org/releases/19.07.7/targets/ath79/generic/openwrt-19.07.7-ath79-generic-tplink_tl-wr842n-v2-squashfs-sysupgrade.bin After the upload, I also checked the checksum:
5e1d205a787e7a698fa228346379d36b3eef9d35507b45137cee544e0e983816

This file seems to contain some kind of partial upgrade. The device is coming up and accessible, but it reports itself as 19.07.6 while using kernel 4.14.221.
Installation of all kernel related modules fail because the opkg/distfeeds.conf references to 19.07.6

04.02.2017463Base systemBug ReportVery LowLowup/down on a usbnet interfaces fails to reassign ULA ad...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: anything running usbnet
- Software versions of LEDE release, packages, etc: head
- Steps to reproduce:

Install the usbnet package, enable a usb0 device in /etc/config/network

(in my case this is a c.h.i.p, but most hackerboards except the pi do usbnet)

config interface ‘usb0’

      option ifname 'usb0'            
      option proto 'static'                 
      option ipaddr '172.26.97.200'
      option netmask '255.255.255.255'
      option ip6assign '64'           
      option ip6class 'local' 

So long as the chip beats the router to booting, this gives it an ipv4 and ipv6 ULA out of the pool.

Reboot the device on the other side. The kernel deregisters and registers the usbnet driver, and netifd assigns the ipv4 address again.

However the ip6 subnet that was assigned from the ula does not come back. Haven’t tried it with a public address.

ifup/ifdown does not work and the ifstatus usb0 does not show any ipv6 addresses assigned.

30.12.20203545Base systemBug ReportVery LowHighunusable channels 13, 12 & auto on raspberry pi 3b & ze...openwrt-19.07Unconfirmed Task Description

Channels 13, 12 and auto are unusuable despite a valid CRDA selection (PL).

Lack of functional support for channels 13 & 12 where those are legally available renders OpenWrt unusable as AP/client on raspberry pi 3 & zero w. Both share the same BRCM 43430 driver.

Auto selection is also crippled:
Wed Dec 30 04:16:49 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Configured channel (0) not found from the channel list of current mode (1) IEEE 802.11g
Wed Dec 30 04:16:49 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Hardware does not support configured channel

Both would be a showstopper. OpenWrt on such platforms is often picked for its AP capabilities.

+ iw reg get
global
country PL: DFS-ETSI
        (2400 - 2483 @ 40), (N/A, 20), (N/A)
        (5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
        (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
        (5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
        (5725 - 5875 @ 80), (N/A, 13), (N/A)
        (57000 - 66000 @ 2160), (N/A, 40), (N/A)

+ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='PL'
wireless.radio0.htmode='HT20'
wireless.radio0.channel='11'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='my_ssid'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.key='my_key'
wireless.default_radio0.hidden='1'
wireless.default_radio0.encryption='psk2'
+ uci set 'wireless.radio0.channel=13'
+ uci commit wireless
+ sleep 1
+ logread -f
+ logger start testing channel 13
+ wifi
Wed Dec 30 04:16:41 2020 user.notice root: start testing channel 13
+ sleep 3
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED MAC_ADDRESS_WAS_HERE
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED MAC_ADDRESS_WAS_HERE
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED MAC_ADDRESS_WAS_HERE
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Dec 30 04:16:41 2020 daemon.notice netifd: Network device 'wlan0' link is down
Wed Dec 30 04:16:41 2020 daemon.notice netifd: Interface 'lan' has link connectivity loss
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8589): command failed: No error information (-524)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:42 2020 daemon.notice netifd: Interface 'lan' is now down
Wed Dec 30 04:16:42 2020 daemon.notice netifd: Interface 'lan' is disabled
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8612): command failed: No error information (-524)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8612): command failed: Not supported (-95)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8612): command failed: I/O error (-5)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8612): command failed: Too many open files in system (-23)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Wed Dec 30 04:16:42 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Dec 30 04:16:42 2020 kern.info kernel: [ 8810.101885] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Dec 30 04:16:42 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:42 2020 daemon.err hostapd: Using interface wlan0 with hwaddr MAC_ADDRESS_WAS_HERE and ssid "my_ssid"
Wed Dec 30 04:16:42 2020 daemon.err hostapd: Failed to set beacon parameters
Wed Dec 30 04:16:42 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:42 2020 daemon.err hostapd: Interface initialization failed
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:42 2020 daemon.err hostapd: wlan0: Unable to setup interface.
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Dec 30 04:16:42 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Dec 30 04:16:42 2020 kern.err kernel: [ 8810.195905] ieee80211 phy0: brcmf_cfg80211_start_ap: Set Channel failed: chspec=4109, -52
Wed Dec 30 04:16:43 2020 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x7fb0bb4e60 user_data=0 handler=0x41d078
Wed Dec 30 04:16:43 2020 daemon.notice netifd: radio0 (8612): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 8118 path ()
Wed Dec 30 04:16:43 2020 daemon.notice netifd: radio0 (8612): Device setup failed: HOSTAPD_START_FAILED
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8225]: exiting on receipt of SIGTERM
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: started, version 2.80 cachesize 150
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: DNS service limited to local subnets
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain test
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain onion
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain localhost
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain local
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain invalid
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain bind
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain lan
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: reading /tmp/resolv.conf.auto
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain test
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain onion
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain localhost
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain local
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain invalid
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain bind
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain lan
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using nameserver IP_ADDRESS_WAS_HERE#53
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using nameserver IP_ADDRESS_WAS_HERE#53
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: read /etc/hosts - 4 addresses
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
+ logger end testing channel 13
Wed Dec 30 04:16:44 2020 user.notice root: end testing channel 13
+ kill '%1'
+ pkill -9 logread
+ set -x
+ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='PL'
wireless.radio0.htmode='HT20'
wireless.radio0.channel='13'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='my_ssid'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.key='my_key'
wireless.default_radio0.hidden='1'
wireless.default_radio0.encryption='psk2'
+ uci set 'wireless.radio0.channel=12'
+ uci commit wireless
+ sleep 1
+ logread -f
+ logger start testing channel 12
Wed Dec 30 04:16:45 2020 user.notice root: start testing channel 12
+ wifi
+ sleep 3
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8783): command failed: No error information (-524)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8803): command failed: No error information (-524)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8803): command failed: Not supported (-95)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8803): command failed: I/O error (-5)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8803): command failed: Too many open files in system (-23)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Wed Dec 30 04:16:45 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Dec 30 04:16:45 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:45 2020 daemon.err hostapd: Using interface wlan0 with hwaddr MAC_ADDRESS_WAS_HERE and ssid "my_ssid"
Wed Dec 30 04:16:45 2020 kern.info kernel: [ 8813.087454] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Dec 30 04:16:45 2020 daemon.err hostapd: Failed to set beacon parameters
Wed Dec 30 04:16:45 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:45 2020 daemon.err hostapd: Interface initialization failed
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:45 2020 daemon.err hostapd: wlan0: Unable to setup interface.
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Wed Dec 30 04:16:45 2020 kern.err kernel: [ 8813.180327] ieee80211 phy0: brcmf_cfg80211_start_ap: Set Channel failed: chspec=4108, -52
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Dec 30 04:16:45 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Dec 30 04:16:46 2020 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x7fa178be60 user_data=0 handler=0x41d078
Wed Dec 30 04:16:46 2020 daemon.notice netifd: radio0 (8803): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 8118 path ()
Wed Dec 30 04:16:46 2020 daemon.notice netifd: radio0 (8803): Device setup failed: HOSTAPD_START_FAILED
+ logger end testing channel 12
Wed Dec 30 04:16:48 2020 user.notice root: end testing channel 12
+ kill '%1'
+ pkill -9 logread
+ set -x
+ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='PL'
wireless.radio0.htmode='HT20'
wireless.radio0.channel='12'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='my_ssid'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.key='my_key'
wireless.default_radio0.hidden='1'
wireless.default_radio0.encryption='psk2'
+ uci set 'wireless.radio0.channel=auto'
+ uci commit wireless
+ sleep 1
+ logread -f
+ logger start testing channel auto
Wed Dec 30 04:16:49 2020 user.notice root: start testing channel auto
+ wifi
+ sleep 3
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8880): command failed: No error information (-524)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8900): command failed: No error information (-524)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8900): command failed: Not supported (-95)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8900): command failed: I/O error (-5)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8900): command failed: Too many open files in system (-23)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Wed Dec 30 04:16:49 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Wed Dec 30 04:16:49 2020 kern.info kernel: [ 8817.154489] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Dec 30 04:16:49 2020 kern.err kernel: [ 8817.166683] ieee80211 phy0: brcmf_run_escan: error (-52)
Wed Dec 30 04:16:49 2020 kern.err kernel: [ 8817.173057] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52)
Wed Dec 30 04:16:49 2020 kern.err kernel: [ 8817.184908] ieee80211 phy0: brcmf_run_escan: error (-52)
Wed Dec 30 04:16:49 2020 kern.err kernel: [ 8817.191232] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52)
Wed Dec 30 04:16:49 2020 daemon.err hostapd: ACS: Failed to request initial scan
Wed Dec 30 04:16:49 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Configured channel (0) not found from the channel list of current mode (1) IEEE 802.11g
Wed Dec 30 04:16:49 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Hardware does not support configured channel
Wed Dec 30 04:16:49 2020 daemon.err hostapd: Could not select hw_mode and channel. (-3)
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:49 2020 daemon.err hostapd: wlan0: Unable to setup interface.
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Dec 30 04:16:49 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Dec 30 04:16:50 2020 daemon.notice netifd: radio0 (8900): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 8118 path ()
Wed Dec 30 04:16:50 2020 daemon.notice netifd: radio0 (8900): Device setup failed: HOSTAPD_START_FAILED
+ logger end testing channel auto
Wed Dec 30 04:16:52 2020 user.notice root: end testing channel auto
+ kill '%1'
+ pkill -9 logread
+ set -x
+ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='PL'
wireless.radio0.htmode='HT20'
wireless.radio0.channel='auto'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='my_ssid'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.key='my_key'
wireless.default_radio0.hidden='1'
wireless.default_radio0.encryption='psk2'
+ uci set 'wireless.radio0.channel=11'
+ uci commit wireless
+ sleep 1
+ logread -f
+ logger start testing channel 11
Wed Dec 30 04:16:53 2020 user.notice root: start testing channel 11
+ wifi
+ sleep 3
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8970): command failed: No error information (-524)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8990): command failed: No error information (-524)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8990): command failed: Not supported (-95)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8990): command failed: I/O error (-5)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8990): command failed: Too many open files in system (-23)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Wed Dec 30 04:16:53 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Dec 30 04:16:53 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Dec 30 04:16:53 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:53 2020 daemon.err hostapd: Using interface wlan0 with hwaddr MAC_ADDRESS_WAS_HERE and ssid "my_ssid"
Wed Dec 30 04:16:53 2020 kern.info kernel: [ 8821.268054] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Dec 30 04:16:53 2020 kern.info kernel: [ 8821.429792] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Wed Dec 30 04:16:53 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED
Wed Dec 30 04:16:53 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Network device 'wlan0' link is up
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Interface 'lan' is enabled
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Interface 'lan' is setting up now
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Interface 'lan' is now up
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Dec 30 04:16:54 2020 user.notice firewall: Reloading firewall due to ifup of lan (wlan0)
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[8765]: exiting on receipt of SIGTERM
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: started, version 2.80 cachesize 150
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: DNS service limited to local subnets
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq-dhcp[9156]: DHCP, IP range IP_ADDRESS_WAS_HERE -- IP_ADDRESS_WAS_HERE, lease time 12h
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain test
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain onion
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain localhost
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain local
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain invalid
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain bind
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain lan
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: reading /tmp/resolv.conf.auto
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain test
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain onion
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain localhost
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain local
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain invalid
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain bind
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain lan
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using nameserver IP_ADDRESS_WAS_HERE#53
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using nameserver IP_ADDRESS_WAS_HERE#53
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: read /etc/hosts - 4 addresses
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq-dhcp[9156]: read /etc/ethers - 0 addresses
+ logger end testing channel 11
Wed Dec 30 04:16:56 2020 user.notice root: end testing channel 11
+ kill '%1'
+ pkill -9 logread
+ iw list
Wiphy phy0
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 1:
                Capabilities: 0x1020
                        HT20
                        Static SM Power Save
                        RX HT20 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-7
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (20.0 dBm)
                        * 2442 MHz [7] (20.0 dBm)
                        * 2447 MHz [8] (20.0 dBm)
                        * 2452 MHz [9] (20.0 dBm)
                        * 2457 MHz [10] (20.0 dBm)
                        * 2462 MHz [11] (20.0 dBm)
                        * 2467 MHz [12] (20.0 dBm)
                        * 2472 MHz [13] (20.0 dBm)
                        * 2484 MHz [14] (disabled)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 2
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
        Supported extended features:
                * [ 4WAY_HANDSHAKE_STA_PSK ]: 4-way handshake with PSK in station mode
                * [ 4WAY_HANDSHAKE_STA_1X ]: 4-way handshake with 802.1X in station mode
+ iwlist wlan0 channel
wlan0     13 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
25.10.20171113KernelBug ReportVery LowMediumUnknown symbol zlib_inflateAllUnconfirmed Task Description

I’ve experienced a strange issue with zlib_inflate on x84_64 system.
There is no zlib_inflate-related symbols at /proc/kallsyms and modules like btrfs couldn’t be loaded.

17.01 branch and the current master branch, both are affected.

Steps to reproduce:
1. Use attached config file (zlib_inflate-test-config). It’s almost default but I’ve set CONFIG_PACKAGE_kmod-fs-btrfs=y and some other options.
2. Compile LEDE:

make defconfig && make -j $(nproc)

3. Run qemu:

qemu-system-x86_64 -curses -kernel bin/targets/x86/64/lede-x86-64-ramfs.bzImage

4. Try to load btrfs module:

root@LEDE:/# modprobe btrfs
[   23.345891] btrfs: Unknown symbol zlib_inflateInit2 (err 0)
[   23.347096] btrfs: Unknown symbol zlib_inflate (err 0)
[   23.347673] btrfs: Unknown symbol zlib_inflate_workspacesize (err 0)
[   23.348293] btrfs: Unknown symbol zlib_inflateEnd (err 0)

It’s not btrfs related but any module with zlib_inflate in it’s dependency list.

15.12.20192676Base systemBug ReportVery LowLowUnexpected realpath behaviouropenwrt-19.07Unconfirmed Task Description

There is a problem with creating chrooted SFTP access using OpenSSH package. However, it seems that the problem isn’t with the package, rather with realpath function of OpenWRT. The whole description of the problem was already provided in forum, here I only copy the part of the log file:

Nov 29 10:06:27 OpenWrt internal-sftp[12557]: realpath "."
Nov 29 10:06:27 OpenWrt internal-sftp[12557]: debug3: request 46352: sent status 2
Nov 29 10:06:27 OpenWrt internal-sftp[12557]: sent status No such file

Tested on both 18.06.5 and 19.07.0-rc1 with the same result.

11.06.20192315Base systemBug ReportVery LowLowUnaligned Instructions on AR71XX TargetsTrunkUnconfirmed Task Description

To reproduce install wpad-openssl-mesh
Enable wireless mesh

echo 2 > /sys/kernel/debug/mips/unaligned_action && sleep 10 && echo 0 >  /sys/kernel/debug/mips/unaligned_action

Kernel Stack Trace

[  344.065508] Call Trace:
[  344.068111] [<870d9b7c>] mesh_rx_plink_frame+0xed0/0x139c [mac80211]
[  344.074626] Code: 96c40002  9646000c  00451026 <96c30004> 9645000e  00862026  00441025  00651826  00431025
[  344.084628]
[  344.086166] CPU: 0 PID: 5 Comm: kworker/u2:0 Not tainted 4.14.123 #0
[  344.092833] Workqueue: phy1 ieee80211_ibss_leave [mac80211]
[  344.098609] task: 87c25600 task.stack: 87c3a000
[  344.103319] $ 0   : 00000000 00000001 00000000 00000000
[  344.108656] $ 4   : 00000000 0000c46e 000067a5 00000000
[  344.114057] $ 8   : 86e25464 00000001 00000004 873811e8
[  344.119433] $12   : ffffffff 00000000 00b00000 00000000
[  344.124806] $16   : 804f0000 8773f078 87315460 8773f082
[  344.130155] $20   : 8773f094 8773f0a9 000000b3 870e89e8
[  344.135485] $24   : 804ef040 870de528
[  344.140915] $28   : 87c3a000 87c3bcb8 870e8a14 870da454
[  344.146279] Hi    : 0004e2ca
[  344.149300] Lo    : b0250b0d
[  344.152383] epc   : 870da988 mesh_rx_path_sel_frame+0x658/0xb08 [mac80211]
[  344.159527] ra    : 870da454 mesh_rx_path_sel_frame+0x124/0xb08 [mac80211]
[  344.166543] Status: 1100dc03 KERNEL EXL IE
[  344.170825] Cause : 00800010 (ExcCode 04)
[  344.174894] BadVA : 8773f0a9
[  344.177829] PrId  : 0001974c (MIPS 74Kc)
[  344.181881] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp ath9k_hw ath qmi_wwan pptp pppox ppp_mppe ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY wireguard usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat cdc_wdm sch_cake nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc
[  344.254146]  em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport cryptodev xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip_gre gre ifb l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel ip_tunnel tun shortcut_fe_ipv6 shortcut_fe algif_skcipher algif_hash af_alg sha1_generic ecb authenc ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common mii aead cryptomgr crypto_null
[  344.326861]  crypto_hash
[  344.329502] Process kworker/u2:0 (pid: 5, threadinfo=87c3a000, task=87c25600, tls=00000000)
[  344.338022] Stack : 0000002f 870ac7f0 00000000 20000009 00000000 00000000 00000000 00000041
[  344.346622]         8717a780 804f0000 87315460 00000041 87380bc0 870b2d30 8717a780 8717a780
[  344.355242]         000000a0 00000000 00000000 802d09dc 8773f092 00000021 00000000 00000000
[  344.363839]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  344.372380]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  344.380888]         ...
[  344.383382] Call Trace:
[  344.386011] [<870da988>] mesh_rx_path_sel_frame+0x658/0xb08 [mac80211]
[  344.392801] [<870d5bb4>] ieee80211_mesh_rx_queued_mgmt+0x15c/0x164 [mac80211]
[  344.400279] [<87097164>] ieee80211_ibss_leave+0x80c/0x1888 [mac80211]
[  344.406922] [<870d5cd0>] ieee80211_mesh_work+0x114/0x2cc [mac80211]
[  344.413498] [<8009d280>] process_one_work+0x1f8/0x428
[  344.418706] [<8009d630>] worker_thread+0x180/0x548
[  344.423692] [<800a3a04>] kthread+0x134/0x13c
[  344.428075] [<80066db8>] ret_from_kernel_thread+0x14/0x1c
[  344.433622] Code: 26950015  2695001b  964508a0 <96a20000> 96a40002  964608a2  00451026  96a30004  964508a4
[  344.443591]
[  344.445124] CPU: 0 PID: 5 Comm: kworker/u2:0 Not tainted 4.14.123 #0
[  344.451809] Workqueue: phy1 ieee80211_ibss_leave [mac80211]
[  344.457609] task: 87c25600 task.stack: 87c3a000
[  344.462251] $ 0   : 00000000 00000001 0000c46e 00000000
[  344.467638] $ 4   : 00000000 0000c46e 000067a5 00000000
[  344.472982] $ 8   : 86e25464 00000001 00000004 873811e8
[  344.478319] $12   : ffffffff 00000000 00b00000 00000000
[  344.483642] $16   : 804f0000 8773f078 87315460 8773f082
[  344.489022] $20   : 8773f094 8773f0a9 000000b3 870e89e8
[  344.494355] $24   : 804ef040 870de528
[  344.499779] $28   : 87c3a000 87c3bcb8 870e8a14 870da454
[  344.505182] Hi    : 0004e2ca
[  344.508135] Lo    : b0250b0d
[  344.511216] epc   : 870da98c mesh_rx_path_sel_frame+0x65c/0xb08 [mac80211]
[  344.518315] ra    : 870da454 mesh_rx_path_sel_frame+0x124/0xb08 [mac80211]
[  344.525377] Status: 1100dc03 KERNEL EXL IE
[  344.529667] Cause : 00800010 (ExcCode 04)
[  344.533773] BadVA : 8773f0ab
[  344.536702] PrId  : 0001974c (MIPS 74Kc)
[  344.540711] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp ath9k_hw ath qmi_wwan pptp pppox ppp_mppe ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY wireguard usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat cdc_wdm sch_cake nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc
[  344.613009]  em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport cryptodev xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip_gre gre ifb l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel ip_tunnel tun shortcut_fe_ipv6 shortcut_fe algif_skcipher algif_hash af_alg sha1_generic ecb authenc ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common mii aead cryptomgr crypto_null
[  344.685675]  crypto_hash
[  344.688299] Process kworker/u2:0 (pid: 5, threadinfo=87c3a000, task=87c25600, tls=00000000)
[  344.696835] Stack : 0000002f 870ac7f0 00000000 20000009 00000000 00000000 00000000 00000041
[  344.705438]         8717a780 804f0000 87315460 00000041 87380bc0 870b2d30 8717a780 8717a780
[  344.714011]         000000a0 00000000 00000000 802d09dc 8773f092 00000021 00000000 00000000
[  344.722611]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  344.731207]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  344.739750]         ...
17.07.20181664Base systemBug ReportVery LowHighUnable to use wan port (dhcp or static ip is not workin...AllNew Task Description

Device: Belkin F9K1115 v2
Software version: OpenWrt 18.06.0-rc1, LEDE after r3466-f6907dc

Unable to use wan port on any new software version (last known working LEDE version is r3466-f6907dc).
DHCP is not getting ip address. After setting up static ip address there is no network communication.

30.12.20182035Base systemBug ReportVery LowMediumUnable to use swap in ZRAM in trunk (brcm47xx).TrunkUnconfirmed Task Description

I’ve gave a try to “trunk” build from 30 DEC on WL500GPv1 (brcm47xx - legacy). It generally works but swap-related things appear to be broken in trunk. At least some builds before this date also known to suffer from same problem.

To reproduce, easiest way:
1) Install trunk on WL500GP V1.
2) Install zram-swap script (opkg update; opkg install zram-swap).
3) Observe what happens.
4) Try to enable swap on zram manually to see what happens.

Result:
- When install of zram-swap script finishes, swap activation fails with the following: block: failed to swapon /dev/zram0 (-1)
- Exactly same issue if I try to mkswap & swapon manually or use my own custom scripting to bring up zram swap, etc (these were known to work earlier/in other systems).



I can see “zram” module is loaded, accepted all parameters, mkswap succeeds, but swapon always fails with obscure -1 error. Same for attempt to swapoff, etc. Seems that “block” thing backfires or so?

27.02.20213646KernelBug ReportVery LowMediumUnable to Swap /proc/swaps does not exist (ramips rt305...openwrt-19.07Unconfirmed Task Description

1)
Device Dlink DIR320 rev.B1
OpenWrt 19.07.7 r11306-c4a6851c72 / LuCI openwrt-19.07 branch git-21.044.30835-34e0d65

2)
Istalled packages:

block-mount
kmod-usb-core
kmod-usb2
kmod-usb-ohci
kmod-usb-storage
kmod-fs-ext4
zram-swap
swap-utils 

3)
How-to:
root@OpenWrt:~# mkswap /dev/sda1
mkswap: /dev/sda1: warning: wiping old swap signature.
Setting up swapspace version 1, size = 511 MiB (535818240 bytes)
no label, UUID=5413e04d-954e-493c-b26d-926a67af1bbc

root@OpenWrt:~# swapon -a
block: failed to swapon /dev/sda1

root@OpenWrt:~# cat /proc/swaps

cat: can't open '/proc/swaps': No such file or directory

So, I think, swap module was accidentally turned off during building firmware, because OpenWRT build version 18.06 works fine!

 


21.04.20203028Base systemBug ReportVery LowMediumUnable to setup multiple WAN interfaces using DHCPv6-PDTrunkUnconfirmed Task Description

- Device problem occurs on - amd64 build on a pcengines apu4
- OpenWRT version - 19.07.2

Quick overview, about a year ago I posted this https://forum.openwrt.org/t/multiple-dhcpv6-wan-interfaces-connection-loss/42056 which gives a detailed overview of what was attempted.

Setting up an alias WAN interface to get multiple /64 prefixes causes them to drop their prefixes ever hour. Setting up multiple WAN interfaces on the same physical interface causes the older one to drop its prefix after an hour while the other works fine.

Steps to reproduce:
Create an alias interface and have it ask for a second prefix from an upstream router

23.02.20181385Base systemBug ReportVery LowMediumUnable to set up repeater on DFS-channelTrunkUnconfirmed Task Description

I have a TP-Link RE450 v1 wireless repeater running OpenWrt SNAPSHOT r6257-94a3af88f3 that I want to set up to extend a network running on a DFS-channel. I am able to connect to the main network in client mode - it is hosted on a NETGEAR R7800 running OpenWrt SNAPSHOT r6150-dc7a1e8555 (hnyman’s latest build). However, the repeating network refuses to start up. This is the guide I followed to set up the relayd-based relay (Luci GUI method): https://openwrt.org/docs/user-guide/wifi/relay_configuration

When following the same method to set up a non-DFS channel everything works as it should.

Here is the system log:

Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.000000] Linux version 4.9.82 (buildbot@builds) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r6038-13e8d54) ) #0 Sun Feb 18 08:21:12 2018
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.000000] MyLoader: sysp=212b15a7, boardp=2d6f6985, parts=6de765b6
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Determined physical RAM map:
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] memory: 08000000 @ 00000000 (usable)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Zone ranges:
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Normal [mem 0×0000000000000000-0x0000000007ffffff]
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Movable zone start for each node
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Early memory node ranges
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] node 0: [mem 0×0000000000000000-0x0000000007ffffff]
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0×0000000000000000-0x0000000007ffffff]
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.000000] On node 0 totalpages: 32768
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 804ab9e4, node_mem_map 81000020
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.000000] Normal zone: 256 pages used for memmap
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.000000] Kernel command line: board=RE450 mtdparts=spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro console=ttyS0,115200 rootfstype=squashfs noinitrd
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Memory: 124612K/131072K available (3394K kernel code, 174K rwdata, 836K rodata, 260K init, 219K bss, 6460K reserved, 0K cma-reserved)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] NR_IRQS:51
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.008299] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.071187] pid_max: default: 32768 minimum: 301
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.076184] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.083229] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.092660] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.103156] futex hash table entries: 256 (order: -1, 3072 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.110567] NET: Registered protocol family 16
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.116508] MIPS: machine is TP-LINK RE450
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 0.122731] registering PCI controller with io_map_base unset
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 0.128976] ar724x-pci ar724x-pci.1: PCIe link is down
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 0.134441] registering PCI controller with io_map_base unset
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.391525] PCI host bridge to bus 0000:00
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.395892] pci_bus 0000:00: root bus resource [mem 0×10000000-0x11ffffff]
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.403234] pci_bus 0000:00: root bus resource [io 0×0000]
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.409157] pci_bus 0000:00: root bus resource [??? 0×00000000 flags 0×0]
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.416382] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.424828] pci 0000:00:00.0: [168c:003c] type 00 class 0×028000 Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.424865] pci 0000:00:00.0: reg 0×10: [mem 0×00000000-0x001fffff 64bit]
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.424915] pci 0000:00:00.0: reg 0×30: [mem 0×00000000-0x0000ffff pref]
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.424980] pci 0000:00:00.0: supports D1 D2
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.425150] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.425171] pci 0000:00:00.0: BAR 0: assigned [mem 0×10000000-0x101fffff 64bit]
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.432989] pci 0000:00:00.0: BAR 6: assigned [mem 0×10200000-0x1020ffff pref]
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.440777] PCI host bridge to bus 0000:01
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.445157] pci_bus 0000:01: root bus resource [mem 0×12000000-0x13ffffff]
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.452466] pci_bus 0000:01: root bus resource [io 0×0001]
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.458398] pci_bus 0000:01: root bus resource [??? 0×00000000 flags 0×0]
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.465613] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.474055] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.474068] pci 0000:00:00.0: using irq 40 for pin 1
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.481748] clocksource: Switched to clocksource MIPS
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.487998] NET: Registered protocol family 2
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.493366] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.500789] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.507593] TCP: Hash tables configured (established 1024 bind 1024)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.514433] UDP hash table entries: 256 (order: 0, 4096 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.520649] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.527538] NET: Registered protocol family 1
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 0.532235] PCI: CLS 0 bytes, default 32
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 0.534326] Crashlog allocated RAM at address 0x3f00000
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.540612] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.553247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.559445] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.576804] io scheduler noop registered
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.580974] io scheduler deadline registered (default)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.586810] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.595712] console [ttyS0] disabled
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.619586] serial8250.0: ttyS0 at MMIO 0×18020000 (irq = 11, base_baud = 2500000) is a 16550A
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.628770] console [ttyS0] enabled
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.636186] bootconsole [early0] disabled
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 0.648931] m25p80 spi0.0: found s25fl064k, expected m25p80
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.667134] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.672033] 6 cmdlinepart partitions found on MTD device spi0.0
Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.678029] Creating 6 MTD partitions on “spi0.0”:
Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.682906] 0×000000000000-0×000000020000 : “u-boot” Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.689064] 0×000000020000-0×000000600000 : “firmware” Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.707081] 2 tplink-fw partitions found on MTD device firmware
Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.713127] 0×000000020000-0x000000185ceb : “kernel” Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.719204] 0x0000001a0000-0×000000600000 : “rootfs” Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.725496] mtd: device 3 (rootfs) set to be root filesystem
Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.731263] 1 squashfs-split partitions found on MTD device rootfs
Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.737575] 0×000000440000-0×000000600000 : “rootfs_data” Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.744349] 0×000000600000-0×000000610000 : “partition-table” Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.751431] 0×000000610000-0×000000620000 : “product-info” Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.758325] 0×000000620000-0x0000007f0000 : “config” Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 0.764662] 0x0000007f0000-0×000000800000 : “art” Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.773062] libphy: GPIO Bitbanged MDIO: probed
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 0.778061] libphy: Fixed MDIO Bus: probed
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 1.512179] ag71xx ag71xx.0: connected to PHY at gpio-0:04 [uid=004dd072, driver=Atheros 8035 ethernet]
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 1.522288] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 1.530065] NET: Registered protocol family 10
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 1.537560] NET: Registered protocol family 17
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 1.542160] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 1.555384] 8021q: 802.1Q VLAN Support v1.8
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 1.561016] hctosys: unable to open rtc device (rtc0)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 1.571029] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 1.579154] Freeing unused kernel memory: 260K
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 1.583687] This architecture does not have kernel memory protection.
Fri Feb 23 18:36:12 2018 user.info kernel: [ 2.132376] init: Console is alive
Fri Feb 23 18:36:12 2018 user.info kernel: [ 2.135998] init: - watchdog -
Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 2.494811] random: fast init done
Fri Feb 23 18:36:12 2018 user.info kernel: [ 2.924159] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Fri Feb 23 18:36:12 2018 user.info kernel: [ 2.965714] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Fri Feb 23 18:36:12 2018 user.info kernel: [ 2.974640] init: - preinit -
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 4.004457] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 7.093477] eth0: link up (1000Mbps/Full duplex)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 7.098187] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Fri Feb 23 18:36:12 2018 kern.notice kernel: [ 7.293806] jffs2: notice: (403) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Fri Feb 23 18:36:12 2018 user.info kernel: [ 7.311068] mount_root: switching to jffs2 overlay
Fri Feb 23 18:36:12 2018 user.warn kernel: [ 7.337522] urandom-seed: Seeding with /etc/urandom.seed
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 7.435532] eth0: link down
Fri Feb 23 18:36:12 2018 user.info kernel: [ 7.447458] procd: - early -
Fri Feb 23 18:36:12 2018 user.info kernel: [ 7.450449] procd: - watchdog -
Fri Feb 23 18:36:12 2018 user.info kernel: [ 8.057837] procd: - watchdog -
Fri Feb 23 18:36:12 2018 user.info kernel: [ 8.061236] procd: - ubus -
Fri Feb 23 18:36:12 2018 user.info kernel: [ 8.168116] procd: - init -
Fri Feb 23 18:36:12 2018 user.info kernel: [ 8.539737] kmodloader: loading kernel modules from /etc/modules.d/*
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 8.571268] ip6_tables: (C) 2000-2006 Netfilter Core Team
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 8.585643] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 8.593800] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 8.602959] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 8.614861] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 8.662930] xt_time: kernel timezone is -0000
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 8.831336] PPP generic driver version 2.4.2
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 8.837672] NET: Registered protocol family 24
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 8.861154] PCI: Enabling device 0000:00:00.0 (0000 → 0002)
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 8.867107] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 9.145193] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 9.156072] ath10k_pci 0000:00:00.0: Falling back to user helper
Fri Feb 23 18:36:12 2018 kern.err kernel: [ 9.344946] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 9.355293] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 9.366187] ath10k_pci 0000:00:00.0: Falling back to user helper
Fri Feb 23 18:36:12 2018 kern.err kernel: [ 9.494658] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 9.508099] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 9.517496] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 9.530543] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00033 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 c41417d0
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 9.624942] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
Fri Feb 23 18:36:12 2018 kern.warn kernel: [ 9.635573] ath10k_pci 0000:00:00.0: Falling back to user helper
Fri Feb 23 18:36:12 2018 kern.err kernel: [ 9.705908] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 9.735953] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
Fri Feb 23 18:36:12 2018 kern.info kernel: [ 10.826902] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 10.963073] ath: EEPROM regdomain: 0×0 Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 10.963080] ath: EEPROM indicates default country code should be used
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 10.963083] ath: doing EEPROM country→regdmn map search
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 10.963093] ath: country maps to regdmn code: 0x3a
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 10.963098] ath: Country alpha2 being used: US
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 10.963101] ath: Regpair used: 0x3a
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 11.080469] ath: EEPROM regdomain: 0×0 Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 11.080476] ath: EEPROM indicates default country code should be used
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 11.080478] ath: doing EEPROM country→regdmn map search
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 11.080490] ath: country maps to regdmn code: 0x3a
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 11.080495] ath: Country alpha2 being used: US
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 11.080497] ath: Regpair used: 0x3a
Fri Feb 23 18:36:12 2018 kern.debug kernel: [ 11.096449] ieee80211 phy1: Selected rate control algorithm ‘minstrel_ht’ Fri Feb 23 18:36:12 2018 kern.info kernel: [ 11.099579] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
Fri Feb 23 18:36:12 2018 user.info kernel: [ 11.109568] kmodloader: done loading kernel modules from /etc/modules.d/*
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: tunnel
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: Network device
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: bridge
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: veth
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: macvlan
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: 8021ad
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: 8021q
Fri Feb 23 18:36:14 2018 daemon.notice procd: /etc/init.d/network: ‘radio1’ is disabled
Fri Feb 23 18:36:14 2018 daemon.notice procd: /etc/init.d/network: ‘radio1’ is disabled
Fri Feb 23 18:36:15 2018 authpriv.info dropbear[953]: Not backgrounding
Fri Feb 23 18:36:17 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN Data
Fri Feb 23 18:36:17 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN Link
Fri Feb 23 18:36:17 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN 2.4 GHz Fri Feb 23 18:36:17 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN 5 GHz Fri Feb 23 18:36:18 2018 kern.info kernel: [ 18.492806] br-lan: port 1(eth0) entered blocking state
Fri Feb 23 18:36:18 2018 kern.info kernel: [ 18.498113] br-lan: port 1(eth0) entered disabled state
Fri Feb 23 18:36:18 2018 kern.info kernel: [ 18.503728] device eth0 entered promiscuous mode
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface ‘lan’ is enabled
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface ‘lan’ is setting up now
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface ‘lan’ is now up
Fri Feb 23 18:36:18 2018 kern.info kernel: [ 18.522482] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface ‘loopback’ is enabled
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface ‘loopback’ is setting up now
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface ‘loopback’ is now up
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Network device ‘lo’ link is up
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface ‘loopback’ has link connectivity
Fri Feb 23 18:36:18 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Feb 23 18:36:19 2018 daemon.info procd: - init complete -
Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776056] ath: EEPROM regdomain: 0×8242 Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776063] ath: EEPROM indicates we should expect a country code
Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776069] ath: doing EEPROM country→regdmn map search
Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776075] ath: country maps to regdmn code: 0×37 Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776079] ath: Country alpha2 being used: NO
Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776082] ath: Regpair used: 0×37 Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776087] ath: regdomain 0×8242 dynamically updated by user
Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776168] ath: EEPROM regdomain: 0×8242 Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776171] ath: EEPROM indicates we should expect a country code
Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776176] ath: doing EEPROM country→regdmn map search
Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776181] ath: country maps to regdmn code: 0×37 Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776184] ath: Country alpha2 being used: NO
Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776186] ath: Regpair used: 0×37 Fri Feb 23 18:36:19 2018 kern.debug kernel: [ 19.776190] ath: regdomain 0×8242 dynamically updated by user
Fri Feb 23 18:36:21 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: started, version 2.79rc1 cachesize 150
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: DNS service limited to local subnets
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain test
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain onion
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain localhost
Fri Feb 23 18:36:23 2018 kern.info kernel: [ 23.441522] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain local
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain invalid
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain example.net
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain example.org
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain example.com
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using 3 more local addresses
Fri Feb 23 18:36:23 2018 daemon.warn dnsmasq[1349]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: read /etc/hosts - 4 addresses
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Feb 23 18:36:23 2018 kern.info kernel: [ 23.460824] br-lan: port 2(wlan0-1) entered blocking state
Fri Feb 23 18:36:23 2018 kern.info kernel: [ 23.466441] br-lan: port 2(wlan0-1) entered disabled state
Fri Feb 23 18:36:23 2018 kern.info kernel: [ 23.472324] device wlan0-1 entered promiscuous mode
Fri Feb 23 18:36:23 2018 daemon.notice hostapd: wlan0-1: interface state UNINITIALIZED→COUNTRY_UPDATE
Fri Feb 23 18:36:23 2018 daemon.notice hostapd: wlan0-1: interface state COUNTRY_UPDATE→HT_SCAN
Fri Feb 23 18:36:23 2018 daemon.notice hostapd: wlan0-1: interface state HT_SCAN→DFS
Fri Feb 23 18:36:23 2018 daemon.notice hostapd: wlan0-1: DFS-CAC-START freq=5560 chan=112 sec_chan=-1, width=1, seg0=106, seg1=0, cac_time=60s
Fri Feb 23 18:36:23 2018 kern.info kernel: [ 23.813439] eth0: link up (1000Mbps/Full duplex)
Fri Feb 23 18:36:23 2018 kern.info kernel: [ 23.818173] br-lan: port 1(eth0) entered blocking state
Fri Feb 23 18:36:23 2018 kern.info kernel: [ 23.823505] br-lan: port 1(eth0) entered forwarding state
Fri Feb 23 18:36:23 2018 daemon.notice netifd: Network device ‘eth0’ link is up
Fri Feb 23 18:36:23 2018 kern.info kernel: [ 23.830482] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Feb 23 18:36:23 2018 daemon.notice netifd: bridge ‘br-lan’ link is up
Fri Feb 23 18:36:23 2018 daemon.notice netifd: Interface ‘lan’ has link connectivity
Fri Feb 23 18:36:25 2018 daemon.info dnsmasq[1349]: read /etc/hosts - 4 addresses
Fri Feb 23 18:36:25 2018 daemon.info dnsmasq[1349]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Feb 23 18:36:33 2018 daemon.err uhttpd[984]: luci: accepted login on /admin for root from 192.168.5.10
Fri Feb 23 18:37:24 2018 daemon.notice hostapd: wlan0-1: DFS-CAC-COMPLETED success=1 freq=5560 ht_enabled=0 chan_offset=0 chan_width=3 cf1=5530 cf2=0
Fri Feb 23 18:37:24 2018 daemon.err hostapd: Using interface wlan0-1 with hwaddr 86:16:f9:d6:21:3a and ssid “Test” Fri Feb 23 18:37:25 2018 daemon.notice hostapd: wlan0-1: interface state DFS→ENABLED
Fri Feb 23 18:37:25 2018 daemon.notice hostapd: wlan0-1: AP-ENABLED
Fri Feb 23 18:37:25 2018 kern.info kernel: [ 85.892280] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Feb 23 18:37:25 2018 daemon.notice netifd: radio0 (1079): Successfully initialized wpa_supplicant
Fri Feb 23 18:37:26 2018 daemon.notice netifd: Interface ‘wwan’ is enabled
Fri Feb 23 18:37:26 2018 daemon.notice hostapd: wlan0-1: DFS-PRE-CAC-EXPIRED freq=5500 ht_enabled=0 chan_offset=0 chan_width=0 cf1=5500 cf2=0
Fri Feb 23 18:37:26 2018 daemon.notice hostapd: wlan0-1: DFS-PRE-CAC-EXPIRED freq=5520 ht_enabled=0 chan_offset=0 chan_width=0 cf1=5520 cf2=0
Fri Feb 23 18:37:26 2018 daemon.notice hostapd: wlan0-1: DFS-PRE-CAC-EXPIRED freq=5540 ht_enabled=0 chan_offset=0 chan_width=0 cf1=5540 cf2=0
Fri Feb 23 18:37:26 2018 daemon.notice hostapd: wlan0-1: DFS-PRE-CAC-EXPIRED freq=5560 ht_enabled=0 chan_offset=0 chan_width=0 cf1=5560 cf2=0
Fri Feb 23 18:37:27 2018 kern.info kernel: [ 88.008800] wlan0: authenticate with a0:40:a0:7c:cb:b9
Fri Feb 23 18:37:27 2018 kern.info kernel: [ 88.018939] wlan0: send auth to a0:40:a0:7c:cb:b9 (try 1/3)
Fri Feb 23 18:37:27 2018 kern.info kernel: [ 88.026654] wlan0: authenticated
Fri Feb 23 18:37:27 2018 kern.info kernel: [ 88.031919] wlan0: associate with a0:40:a0:7c:cb:b9 (try 1/3)
Fri Feb 23 18:37:27 2018 kern.info kernel: [ 88.039518] wlan0: RX AssocResp from a0:40:a0:7c:cb:b9 (capab=0×111 status=0 aid=5)
Fri Feb 23 18:37:27 2018 kern.info kernel: [ 88.048975] wlan0: associated
Fri Feb 23 18:37:27 2018 daemon.notice netifd: Network device ‘wlan0’ link is up
Fri Feb 23 18:37:27 2018 daemon.notice netifd: Interface ‘wwan’ has link connectivity
Fri Feb 23 18:37:27 2018 daemon.notice netifd: Interface ‘wwan’ is setting up now
Fri Feb 23 18:37:27 2018 kern.info kernel: [ 88.058784] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Fri Feb 23 18:37:27 2018 kern.debug kernel: [ 88.071867] wlan0: Limiting TX power to 23 (26 - 3) dBm as advertised by a0:40:a0:7c:cb:b9
Fri Feb 23 18:37:27 2018 daemon.notice netifd: wwan (1595): udhcpc: started, v1.27.2
Fri Feb 23 18:37:28 2018 daemon.notice netifd: wwan (1595): udhcpc: sending discover
Fri Feb 23 18:37:28 2018 daemon.notice netifd: wwan (1595): udhcpc: sending select for 192.168.1.144
Fri Feb 23 18:37:28 2018 daemon.notice netifd: wwan (1595): udhcpc: lease of 192.168.1.144 obtained, lease time 43200
Fri Feb 23 18:37:28 2018 daemon.err hostapd: Failed to set beacon parameters
Fri Feb 23 18:37:28 2018 daemon.notice netifd: Interface ‘wwan’ is now up
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: reading /tmp/resolv.conf.auto
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain test
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain onion
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain localhost
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain local
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain invalid
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain example.net
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain example.org
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain example.com
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using nameserver 192.168.1.1#53
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using 3 more local addresses
Fri Feb 23 18:37:28 2018 user.notice firewall: Reloading firewall due to ifup of wwan (wlan0)
Fri Feb 23 18:39:43 2018 daemon.warn odhcpd[888]: DHCPV6 CONFIRM IA_NA from 000466ecdf7df77d2477547e0529ea254566 on br-lan: not on-link
Fri Feb 23 18:39:44 2018 daemon.info dnsmasq[1349]: read /etc/hosts - 4 addresses
Fri Feb 23 18:39:44 2018 daemon.info dnsmasq[1349]: read /tmp/hosts/odhcpd - 0 addresses
Fri Feb 23 18:39:44 2018 daemon.info dnsmasq[1349]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Feb 23 18:39:44 2018 daemon.warn odhcpd[888]: DHCPV6 SOLICIT IA_NA from 000466ecdf7df77d2477547e0529ea254566 on br-lan: ok fd6a:5bd0:8330::35e/128
Fri Feb 23 18:39:45 2018 daemon.warn odhcpd[888]: DHCPV6 REQUEST IA_NA from 000466ecdf7df77d2477547e0529ea254566 on br-lan: ok fd6a:5bd0:8330::35e/128
Fri Feb 23 18:39:45 2018 daemon.info dnsmasq[1349]: read /etc/hosts - 4 addresses
Fri Feb 23 18:39:45 2018 daemon.info dnsmasq[1349]: read /tmp/hosts/odhcpd - 0 addresses
Fri Feb 23 18:39:45 2018 daemon.info dnsmasq[1349]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Feb 23 18:40:06 2018 kern.notice kernel: [ 113.239791] random: crng init done

And here is the kernel log:

[ 0.000000] Linux version 4.9.82 (buildbot@builds) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r6038-13e8d54) ) #0 Sun Feb 18 08:21:12 2018
[ 0.000000] MyLoader: sysp=212b15a7, boardp=2d6f6985, parts=6de765b6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 804ab9e4, node_mem_map 81000020
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: board=RE450 mtdparts=spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro console=ttyS0,115200 rootfstype=squashfs noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 124612K/131072K available (3394K kernel code, 174K rwdata, 836K rodata, 260K init, 219K bss, 6460K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
[ 0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
[ 0.008299] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[ 0.071187] pid_max: default: 32768 minimum: 301
[ 0.076184] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.083229] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092660] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.103156] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.110567] NET: Registered protocol family 16
[ 0.116508] MIPS: machine is TP-LINK RE450
[ 0.122731] registering PCI controller with io_map_base unset
[ 0.128976] ar724x-pci ar724x-pci.1: PCIe link is down
[ 0.134441] registering PCI controller with io_map_base unset
[ 0.391525] PCI host bridge to bus 0000:00
[ 0.395892] pci_bus 0000:00: root bus resource [mem 0×10000000-0x11ffffff]
[ 0.403234] pci_bus 0000:00: root bus resource [io 0×0000]
[ 0.409157] pci_bus 0000:00: root bus resource [??? 0×00000000 flags 0×0]
[ 0.416382] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.424828] pci 0000:00:00.0: [168c:003c] type 00 class 0×028000 [ 0.424865] pci 0000:00:00.0: reg 0×10: [mem 0×00000000-0x001fffff 64bit]
[ 0.424915] pci 0000:00:00.0: reg 0×30: [mem 0×00000000-0x0000ffff pref]
[ 0.424980] pci 0000:00:00.0: supports D1 D2
[ 0.425150] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.425171] pci 0000:00:00.0: BAR 0: assigned [mem 0×10000000-0x101fffff 64bit]
[ 0.432989] pci 0000:00:00.0: BAR 6: assigned [mem 0×10200000-0x1020ffff pref]
[ 0.440777] PCI host bridge to bus 0000:01
[ 0.445157] pci_bus 0000:01: root bus resource [mem 0×12000000-0x13ffffff]
[ 0.452466] pci_bus 0000:01: root bus resource [io 0×0001]
[ 0.458398] pci_bus 0000:01: root bus resource [??? 0×00000000 flags 0×0]
[ 0.465613] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[ 0.474055] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.474068] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.481748] clocksource: Switched to clocksource MIPS
[ 0.487998] NET: Registered protocol family 2
[ 0.493366] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.500789] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.507593] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.514433] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.520649] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.527538] NET: Registered protocol family 1
[ 0.532235] PCI: CLS 0 bytes, default 32
[ 0.534326] Crashlog allocated RAM at address 0x3f00000
[ 0.540612] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.553247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.559445] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 0.576804] io scheduler noop registered
[ 0.580974] io scheduler deadline registered (default)
[ 0.586810] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.595712] console [ttyS0] disabled
[ 0.619586] serial8250.0: ttyS0 at MMIO 0×18020000 (irq = 11, base_baud = 2500000) is a 16550A
[ 0.628770] console [ttyS0] enabled
[ 0.636186] bootconsole [early0] disabled
[ 0.648931] m25p80 spi0.0: found s25fl064k, expected m25p80
[ 0.667134] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 0.672033] 6 cmdlinepart partitions found on MTD device spi0.0
[ 0.678029] Creating 6 MTD partitions on “spi0.0”:
[ 0.682906] 0×000000000000-0×000000020000 : “u-boot” [ 0.689064] 0×000000020000-0×000000600000 : “firmware” [ 0.707081] 2 tplink-fw partitions found on MTD device firmware
[ 0.713127] 0×000000020000-0x000000185ceb : “kernel” [ 0.719204] 0x0000001a0000-0×000000600000 : “rootfs” [ 0.725496] mtd: device 3 (rootfs) set to be root filesystem
[ 0.731263] 1 squashfs-split partitions found on MTD device rootfs
[ 0.737575] 0×000000440000-0×000000600000 : “rootfs_data” [ 0.744349] 0×000000600000-0×000000610000 : “partition-table” [ 0.751431] 0×000000610000-0×000000620000 : “product-info” [ 0.758325] 0×000000620000-0x0000007f0000 : “config” [ 0.764662] 0x0000007f0000-0×000000800000 : “art” [ 0.773062] libphy: GPIO Bitbanged MDIO: probed
[ 0.778061] libphy: Fixed MDIO Bus: probed
[ 1.512179] ag71xx ag71xx.0: connected to PHY at gpio-0:04 [uid=004dd072, driver=Atheros 8035 ethernet]
[ 1.522288] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[ 1.530065] NET: Registered protocol family 10
[ 1.537560] NET: Registered protocol family 17
[ 1.542160] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.555384] 8021q: 802.1Q VLAN Support v1.8
[ 1.561016] hctosys: unable to open rtc device (rtc0)
[ 1.571029] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 1.579154] Freeing unused kernel memory: 260K
[ 1.583687] This architecture does not have kernel memory protection.
[ 2.132376] init: Console is alive
[ 2.135998] init: - watchdog -
[ 2.494811] random: fast init done
[ 2.924159] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.965714] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.974640] init: - preinit -
[ 4.004457] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.093477] eth0: link up (1000Mbps/Full duplex)
[ 7.098187] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.293806] jffs2: notice: (403) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 7.311068] mount_root: switching to jffs2 overlay
[ 7.337522] urandom-seed: Seeding with /etc/urandom.seed
[ 7.435532] eth0: link down
[ 7.447458] procd: - early -
[ 7.450449] procd: - watchdog -
[ 8.057837] procd: - watchdog -
[ 8.061236] procd: - ubus -
[ 8.168116] procd: - init -
[ 8.539737] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.571268] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.585643] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 8.593800] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 8.602959] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.614861] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 8.662930] xt_time: kernel timezone is -0000
[ 8.831336] PPP generic driver version 2.4.2
[ 8.837672] NET: Registered protocol family 24
[ 8.861154] PCI: Enabling device 0000:00:00.0 (0000 → 0002)
[ 8.867107] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 9.145193] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[ 9.156072] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 9.344946] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 9.355293] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[ 9.366187] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 9.494658] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 9.508099] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 9.517496] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 9.530543] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00033 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 c41417d0
[ 9.624942] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 9.635573] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 9.705908] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 9.735953] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 10.826902] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[ 10.963073] ath: EEPROM regdomain: 0×0 [ 10.963080] ath: EEPROM indicates default country code should be used
[ 10.963083] ath: doing EEPROM country→regdmn map search
[ 10.963093] ath: country maps to regdmn code: 0x3a
[ 10.963098] ath: Country alpha2 being used: US
[ 10.963101] ath: Regpair used: 0x3a
[ 11.080469] ath: EEPROM regdomain: 0×0 [ 11.080476] ath: EEPROM indicates default country code should be used
[ 11.080478] ath: doing EEPROM country→regdmn map search
[ 11.080490] ath: country maps to regdmn code: 0x3a
[ 11.080495] ath: Country alpha2 being used: US
[ 11.080497] ath: Regpair used: 0x3a
[ 11.096449] ieee80211 phy1: Selected rate control algorithm ‘minstrel_ht’ [ 11.099579] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
[ 11.109568] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 18.492806] br-lan: port 1(eth0) entered blocking state
[ 18.498113] br-lan: port 1(eth0) entered disabled state
[ 18.503728] device eth0 entered promiscuous mode
[ 18.522482] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 19.776056] ath: EEPROM regdomain: 0×8242 [ 19.776063] ath: EEPROM indicates we should expect a country code
[ 19.776069] ath: doing EEPROM country→regdmn map search
[ 19.776075] ath: country maps to regdmn code: 0×37 [ 19.776079] ath: Country alpha2 being used: NO
[ 19.776082] ath: Regpair used: 0×37 [ 19.776087] ath: regdomain 0×8242 dynamically updated by user
[ 19.776168] ath: EEPROM regdomain: 0×8242 [ 19.776171] ath: EEPROM indicates we should expect a country code
[ 19.776176] ath: doing EEPROM country→regdmn map search
[ 19.776181] ath: country maps to regdmn code: 0×37 [ 19.776184] ath: Country alpha2 being used: NO
[ 19.776186] ath: Regpair used: 0×37 [ 19.776190] ath: regdomain 0×8242 dynamically updated by user
[ 23.441522] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[ 23.460824] br-lan: port 2(wlan0-1) entered blocking state
[ 23.466441] br-lan: port 2(wlan0-1) entered disabled state
[ 23.472324] device wlan0-1 entered promiscuous mode
[ 23.813439] eth0: link up (1000Mbps/Full duplex)
[ 23.818173] br-lan: port 1(eth0) entered blocking state
[ 23.823505] br-lan: port 1(eth0) entered forwarding state
[ 23.830482] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 85.892280] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 88.008800] wlan0: authenticate with a0:40:a0:7c:cb:b9
[ 88.018939] wlan0: send auth to a0:40:a0:7c:cb:b9 (try 1/3)
[ 88.026654] wlan0: authenticated
[ 88.031919] wlan0: associate with a0:40:a0:7c:cb:b9 (try 1/3)
[ 88.039518] wlan0: RX AssocResp from a0:40:a0:7c:cb:b9 (capab=0×111 status=0 aid=5)
[ 88.048975] wlan0: associated
[ 88.058784] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 88.071867] wlan0: Limiting TX power to 23 (26 - 3) dBm as advertised by a0:40:a0:7c:cb:b9
[ 113.239791] random: crng init done


16.05.20181550Base systemBug ReportVery LowCriticalUnable to handle kernel paging request causes router to...TrunkUnconfirmed Task Description

- Device problem occurs on
Xiaomi mi router 3G (R3G)

- Software versions of OpenWrt/LEDE release, packages, etc.
Latest trunk (r6893-bfbdeeb) custom build

- Steps to reproduce
Did not notice there is a pattern here.

- The issue
The kernel crash causes the router to reboot. Here are two traces I was able to catch

May 13 07:24:52 router kernel: [82948.434471] CPU 1 Unable to handle kernel paging request at virtual address 07407800, epc == 80136a70, ra == 8013694c
May 13 07:24:52 router kernel: [82948.445103] Oops[#1]:
May 13 07:24:52 router kernel: [82948.447387] CPU: 1 PID: 1977 Comm: kworker/u8:1 Not tainted 4.14.37 #0
May 13 07:24:52 router kernel: [82948.453909] Workqueue: writeback wb_workfn (flush-8:0)
May 13 07:24:52 router kernel: [82948.459046] task: 8ff3ddc0 task.stack: 8dd62000
May 13 07:24:52 router kernel: [82948.463565] $ 0 : 00000000 00000001 00000000 812286b0
May 13 07:24:52 router kernel: [82948.468800] $ 4 : 805aa44c 00000001 00000001 07407800
May 13 07:24:52 router kernel: [82948.474019] $ 8 : 000facb3 000facb2 00000002 00064000
May 13 07:24:52 router kernel: [82948.479248] $12 : 00000009 0004001a fffeffff 00001000
May 13 07:24:52 router kernel: [82948.484473] $16 : 8fc02c00 000001b8 01011200 8022b6f0
May 13 07:24:52 router kernel: [82948.489695] $20 : 8ebb0000 8006a664 8e56d81c 01400000
May 13 07:24:52 router kernel: [82948.494913] $24 : 81196320 00000000
May 13 07:24:52 router kernel: [82948.500133] $28 : 8dd62000 8dd63950 8fd77d40 8013694c
May 13 07:24:52 router kernel: [82948.505351] Hi : 00000000
May 13 07:24:52 router kernel: [82948.508214] Lo : 00840480
May 13 07:24:52 router kernel: [82948.511113] epc : 80136a70 kmalloc+0x1f8/0x2ec
May 13 07:24:52 router kernel: [82948.515887] ra : 8013694c
kmalloc+0xd4/0x2ec
May 13 07:24:52 router kernel: [82948.520568] Status: 11007c03#011KERNEL EXL IE May 13 07:24:52 router kernel: [82948.524750] Cause : 40800008 (ExcCode 02)
May 13 07:24:52 router kernel: [82948.528740] BadVA : 07407800
May 13 07:24:52 router kernel: [82948.531605] PrId : 0001992f (MIPS 1004Kc)
May 13 07:24:52 router kernel: [82948.535679] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 cdc_ether xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack libcrc32c iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport
May 13 07:24:52 router kernel: [82948.606444] ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables vfat fat nls_utf8 nls_iso8859_1 nls_cp437 usb_storage leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii crc32c_generic
May 13 07:24:52 router kernel: [82948.655996] Process kworker/u8:1 (pid: 1977, threadinfo=8dd62000, task=8ff3ddc0, tls=00000000)
May 13 07:24:52 router kernel: [82948.664578] Stack : 01011200 00400000 8006a664 8f0c719c 00000001 00000000 8fd33300 01011200
May 13 07:24:52 router kernel: [82948.672925] 8fe74850 01011200 00000001 00400000 8006a664 8022b6f0 8fe74850 01011200
May 13 07:24:52 router kernel: [82948.681267] 01411200 8fdf9e00 01011200 01411200 8e56d800 800ecd30 8fe74850 01011200
May 13 07:24:52 router kernel: [82948.689609] 01411200 8fdf9d00 01400000 00400000 8006a664 800ecd30 00060000 00000001
May 13 07:24:52 router kernel: [82948.697952] 8dd63a48 8fe74850 00000000 8fe74850 00000001 8fe74850 00000000 8fe74878
May 13 07:24:52 router kernel: [82948.706292] ...
May 13 07:24:52 router kernel: [82948.708733] Call Trace:
May 13 07:24:52 router kernel: [82948.711201] [<80136a70>] __kmalloc+0x1f8/0x2ec
May 13 07:24:52 router kernel: [82948.715643] [<8022b6f0>] alloc_request_size+0x2c/0x7c
May 13 07:24:52 router kernel: [82948.720708] [<800ecd30>] mempool_alloc+0x6c/0×178 May 13 07:24:52 router kernel: [82948.725402] [<8022cf88>] get_request+0×360/0x76c
May 13 07:24:52 router kernel: [82948.730005] [<802303c4>] blk_queue_bio+0x1cc/0×430 May 13 07:24:52 router kernel: [82948.734781] [<8022e3cc>] generic_make_request+0xd8/0×288 May 13 07:24:52 router kernel: [82948.740078] [<8022e6a0>] submit_bio+0×124/0×164 May 13 07:24:52 router kernel: [82948.744663] [<8f1c3014>] ext4_io_submit+0×50/0×64 [ext4]
May 13 07:24:52 router kernel: [82948.749989] [<8f1a5994>] ext4_mark_inode_dirty+0xeac/0×1368 [ext4]
May 13 07:24:52 router kernel: [82948.756166] Code: 32428000 8e020014 00e23821 <8ce20000> 1000002c cc400000 1280ffbc 00000000 8e060010
May 13 07:24:52 router kernel: [82948.765910]
May 13 07:24:52 router kernel: [82948.767638] —[ end trace e8f9893fb33e6a26 ]—

and the second case

May 15 15:52:16 router kernel: [67618.480256] CPU 0 Unable to handle kernel paging request at virtual address 07402800, epc == 80136784, ra == 800ecd30
May 15 15:52:16 router kernel: [67618.490997] Oops[#1]:
May 15 15:52:16 router kernel: [67618.493275] CPU: 0 PID: 14159 Comm: kworker/u8:1 Not tainted 4.14.37 #0
May 15 15:52:16 router kernel: [67618.499875] Workqueue: writeback wb_workfn (flush-8:0)
May 15 15:52:16 router kernel: [67618.504997] task: 8c3276c0 task.stack: 8b656000
May 15 15:52:16 router kernel: [67618.509500] $ 0 : 00000000 00000001 00000000 8121a6c0
May 15 15:52:16 router kernel: [67618.514709] $ 4 : 805aa44c 00000001 00000001 07402800
May 15 15:52:16 router kernel: [67618.519918] $ 8 : 00005ddf 00005dde 8fb9b6a0 00000120
May 15 15:52:16 router kernel: [67618.525127] $12 : 8000001f 00000010 00000124 00000001
May 15 15:52:16 router kernel: [67618.530336] $16 : 8fd4a200 01011200 800ecd30 8b0e0000
May 15 15:52:16 router kernel: [67618.535545] $20 : 00400000 8006a664 8fd4981c 80660000
May 15 15:52:16 router kernel: [67618.540754] $24 : ffffffe0 ffff0000
May 15 15:52:16 router kernel: [67618.545963] $28 : 8b656000 8b657970 8f1c2c24 800ecd30
May 15 15:52:16 router kernel: [67618.551174] Hi : 00000000
May 15 15:52:16 router kernel: [67618.554035] Lo : 008402f0
May 15 15:52:16 router kernel: [67618.556924] epc : 80136784 kmem_cache_alloc+0x13c/0×230 May 15 15:52:16 router kernel: [67618.562323] ra : 800ecd30 mempool_alloc+0x6c/0×178 May 15 15:52:16 router kernel: [67618.567345] Status: 11008403#011KERNEL EXL IE May 15 15:52:16 router kernel: [67618.571515] Cause : 40800008 (ExcCode 02)
May 15 15:52:16 router kernel: [67618.575499] BadVA : 07402800
May 15 15:52:16 router kernel: [67618.578361] PrId : 0001992f (MIPS 1004Kc)
May 15 15:52:16 router kernel: [67618.582431] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 cdc_ether xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack libcrc32c iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport
May 15 15:52:16 router kernel: [67618.653177] ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables vfat fat nls_utf8 nls_iso8859_1 nls_cp437 usb_storage leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii crc32c_generic
May 15 15:52:16 router kernel: [67618.702675] Process kworker/u8:1 (pid: 14159, threadinfo=8b656000, task=8c3276c0, tls=00000000)
May 15 15:52:16 router kernel: [67618.711326] Stack : 8e648b20 8f147e00 8e648b20 01011200 00000001 8022b710 00000002 01011200
May 15 15:52:16 router kernel: [67618.719658] 01411200 8fd49800 01400000 00400000 8006a664 800ecd30 00000001 01011200
May 15 15:52:16 router kernel: [67618.727990] 01411200 8fd49700 01400000 00400000 8006a664 800ecd30 8e330030 8c499000
May 15 15:52:16 router kernel: [67618.736322] 8fd9f000 8b657a2c 01400000 8fd49800 01400000 01400000 8e47fa00 8d44d8f8
May 15 15:52:16 router kernel: [67618.744655] 80660000 80225974 8fd49600 00000100 01400000 8d48d7c0 8e47fa00 8fd49600
May 15 15:52:16 router kernel: [67618.752989] ...
May 15 15:52:16 router kernel: [67618.755425] Call Trace:
May 15 15:52:16 router kernel: [67618.757859] [<80136784>] kmem_cache_alloc+0x13c/0×230 May 15 15:52:16 router kernel: [67618.762897] [<800ecd30>] mempool_alloc+0x6c/0×178 May 15 15:52:16 router kernel: [67618.767596] [<80225974>] bvec_alloc+0xdc/0×154 May 15 15:52:16 router kernel: [67618.772020] [<80225b44>] bio_alloc_bioset+0×158/0×250 May 15 15:52:16 router kernel: [67618.777111] [<8f1c3358>] ext4_bio_write_page+0×320/0x5c4 [ext4]
May 15 15:52:16 router kernel: [67618.783028] [<8f19e3f4>] ext4_convert_inline_data+0×874/0x21a8 [ext4]
May 15 15:52:16 router kernel: [67618.789461] [<8f19e860>] ext4_convert_inline_data+0xce0/0x21a8 [ext4]
May 15 15:52:16 router kernel: [67618.795881] Code: 32228000 8e020014 00e23821 <8ce20000> 1000002d cc400000 1260ffbc 00000000 8e060010
May 15 15:52:16 router kernel: [67618.805607]
May 15 15:52:16 router kernel: [67618.807332] —[ end trace 3b32ff5399a1bc64 ]—


29.12.20192709Base systemBug ReportVery LowMediumUnable to connect wifi on mvebu platform with esp8266openwrt-19.07Unconfirmed Task Description

- Device problem occurs on mvebu platform - Linksys wrt3200acm Marvell 88W8964 802.11bgn wifi while trying to connect by esp8266
- Software versions OpenWrt 19.07

esp8266 is not getting dhcp address and even when trying to communicate with static IP it is not possible to acquire connection. esp8266 is unable to get access to the router. Same problem exists in openwrt 18.06

 


19.03.20181445Base systemBug ReportVery LowLowUnable to compile : "Cannot find appropriate hash comma...TrunkUnconfirmed Task Description

- Device problem occurs on

TP-LINK Archer v2

- Software versions of OpenWrt/LEDE release, packages, etc.

Trunk compiled under Ubuntu 18.04

- Steps to reproduce

Trying to compile the latest trunk version of openwrt and I get the following error:

make[3]: Entering directory ‘/mnt/home/openwrt/trunk/toolchain/binutils’ mkdir -p /mnt/home/openwrt/trunk/dl
SHELL= flock /mnt/home/openwrt/trunk/tmp/.binutils-.tar.bz2.flock -c ' /mnt/home/openwrt/trunk/scripts/download.pl “/mnt/home/openwrt/trunk/dl” “binutils-.tar.bz2” “none” “” “@GNU/binutils/” '
Cannot find appropriate hash command, ensure the provided hash is either a MD5 or SHA256 checksum.
Makefile:118: recipe for target ‘/mnt/home/openwrt/trunk/dl/binutils-.tar.bz2’ failed

Seems like “none” value should be “skip” instead. How do I fix that?


14.06.20203181Base systemBug ReportVery LowHighunable to build 19.07.3 for clearfog proopenwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
Clearfog pro

- Software versions of OpenWrt/LEDE release, packages, etc.
tag 19.07.3
- Steps to reproduce
make fails:

export CROSS="arm-openwrt-linux-muslgnueabi-"  NO_RENAME=1 ; NM="arm-openwrt-linux-muslgnueabi-nm" STRIP="/home/oli/openwrt/staging_dir/host/bin/sstrip" STRIP_KMOD="/home/oli/openwrt/scripts/strip-kmod.sh" PATCHELF="/home/oli/openwrt/staging_dir/host/bin/patchelf" /home/oli/openwrt/scripts/rstrip.sh /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools
rstrip.sh: /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools/usr/sbin/fw_printenv: executable
(cd /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools/CONTROL; ( echo "$CONTROL"; printf "Description: "; echo "$DESCRIPTION" | sed -e 's,^[[:space:]]*, ,g'; ) > control; chmod 644 control; ( echo "#!/bin/sh"; echo "[ \"\${IPKG_NO_SCRIPT}\" = \"1\" ] && exit 0"; echo "[ -x "\${IPKG_INSTROOT}/lib/functions.sh" ] || exit 0"; echo ". \${IPKG_INSTROOT}/lib/functions.sh"; echo "default_postinst \$0 \$@"; ) > postinst; ( echo "#!/bin/sh"; echo "[ -x "\${IPKG_INSTROOT}/lib/functions.sh" ] || exit 0"; echo ". \${IPKG_INSTROOT}/lib/functions.sh"; echo "default_prerm \$0 \$@"; ) > prerm; chmod 0755 postinst prerm; echo "$V_Package_uboot_envtools_conffiles" > conffiles;  )
install -d -m0755 /home/oli/openwrt/bin/targets/mvebu/cortexa9/packages
/home/oli/openwrt/scripts/ipkg-build -c -o 0 -g 0 /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools /home/oli/openwrt/bin/targets/mvebu/cortexa9/packages
/home/oli/openwrt/staging_dir/host/bin/find: '/home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools/etc/config/ubootenv': No such file or directory
/home/oli/openwrt/staging_dir/host/bin/find: '/home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools/etc/fw_env.config': No such file or directory
Packaged contents of /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-2018.03/ipkg-arm_cortex-a9_vfpv3-d16/uboot-envtools into /home/oli/openwrt/bin/targets/mvebu/cortexa9/packages/uboot-envtools_2018.03-3_arm_cortex-a9_vfpv3-d16.ipk
echo "uboot-envtools" >> /home/oli/openwrt/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/pkginfo/uboot-envtools.default.install
make[3]: Leaving directory '/home/oli/openwrt/package/boot/uboot-envtools'
time: package/boot/uboot-envtools/compile#1.27#0.68#1.71
make[3]: Entering directory '/home/oli/openwrt/package/boot/uboot-mvebu'
rm -f /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-clearfog/u-boot-2018.03/.built
touch /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-clearfog/u-boot-2018.03/.built_check
make  -C /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-clearfog/u-boot-2018.03 CROSS_COMPILE=arm-openwrt-linux-muslgnueabi- DTC="/home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/linux-mvebu_cortexa9/linux-4.14.180/scripts/dtc/dtc" HOSTCC="gcc" HOSTCFLAGS="-O2 -I/home/oli/openwrt/staging_dir/host/include -I/home/oli/openwrt/staging_dir/hostpkg/include -I/home/oli/openwrt/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/host/include -I/home/oli/openwrt/staging_dir/host/include -I/home/oli/openwrt/staging_dir/hostpkg/include -I/home/oli/openwrt/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/host/include -std=gnu11" HOSTLDFLAGS="-L/home/oli/openwrt/staging_dir/host/lib -L/home/oli/openwrt/staging_dir/hostpkg/lib -L/home/oli/openwrt/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/host/lib"
make[4]: Entering directory '/home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-clearfog/u-boot-2018.03'
  CHK     include/config/uboot.release
  CHK     include/generated/version_autogenerated.h
  CHK     include/generated/timestamp_autogenerated.h
  CC      lib/asm-offsets.s
  CHK     include/generated/generic-asm-offsets.h
  UPD     include/generated/generic-asm-offsets.h
  CC      arch/arm/lib/asm-offsets.s
  CHK     include/generated/asm-offsets.h
  UPD     include/generated/asm-offsets.h
  HOSTLD  scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
make[6]: *** [scripts/Makefile.host:108: scripts/dtc/dtc] Error 1
make[5]: *** [scripts/Makefile.build:425: scripts/dtc] Error 2
make[4]: *** [Makefile:491: scripts] Error 2
make[4]: Leaving directory '/home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-clearfog/u-boot-2018.03'
make[3]: *** [Makefile:53: /home/oli/openwrt/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/u-boot-clearfog/u-boot-2018.03/.built] Error 2
make[3]: Leaving directory '/home/oli/openwrt/package/boot/uboot-mvebu'
time: package/boot/uboot-mvebu/clearfog/compile#0.32#0.20#0.51
make[2]: *** [package/Makefile:113: package/boot/uboot-mvebu/compile] Error 2
make[2]: Leaving directory '/home/oli/openwrt'
make[1]: *** [package/Makefile:107: /home/oli/openwrt/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/oli/openwrt'
make: *** [/home/oli/openwrt/include/toplevel.mk:227: world] Fehler 2
08.05.2017767ToolchainBug ReportVery LowMediumuml: Imagebuilder does not honor default packages for u...TrunkUnconfirmed Task Description

Stock LEDE - r4099-4c3953b

Plain UML images are fine and work. If you want to build images with the imagebuilder the default package list is not honored and modules are missing - like kmod-80211-hwsim and all related packages.

The squashfs image also does not work:

[    0.270000] squashfs: SQUASHFS error: Filesystem uses "zlib" compression. This is not supported

profiles.mk in Imagebuilder dir seems wonky:

$ cat .profiles.mk
PROFILE_NAMES = Default
Default_NAME:=Default
Default_PACKAGES:=

.targetinfo looks okay, but I don’t know:

Source-Makefile: target/linux/uml/Makefile
Target: uml
Target-Board: uml
Target-Name: User Mode Linux
Target-Arch: x86_64
Target-Arch-Packages: x86_64
Target-Features: audio ext4 source-only squashfs
Target-Depends:
Target-Optimization: -Os -pipe
CPU-Type:
Linux-Version: 4.4.61
Linux-Release: 1
Linux-Kernel-Arch: um
Target-Description:

@@
Default-Packages: base-files libc libgcc busybox dropbear mtd uci opkg netifd fstools uclient-fetch logd dnsmasq iptables ip6tables ppp ppp-mod-pppoe firewall odhcpd odhcp6c wpad-mini kmod-mac80211-hwsim mkf2fs e2fsprogs iwinfo
18.10.20203391Base systemBug ReportVery LowLowUML: boot: warning during early /sbin/initTrunkUnconfirmed Task Description

selfcompiled:
OpenWrt SNAPSHOT, r14721+18-4ff7bdfeeb

Image is working, so this seems to be cosmetic only.

[...]
[ 0.100000] Run /sbin/init as init process
[ 0.120000] init: Console is alive
[ 0.120000] harddog_open - run_helper failed, errno = -2
[ 0.120000] ————[ cut here ]———— [ 0.120000] WARNING: CPU: 0 PID: 1 at fs/open.c:832 do_dentry_open+0x31a/0×430 [ 0.120000] Modules linked in:
[ 0.120000] CPU: 0 PID: 1 Comm: init Not tainted 5.4.71 #0
[ 0.120000] Stack:
[ 0.120000] 607ae5d4 62433ae7 600385a0 00000009
[ 0.120000] 62433af8 00000000 00000000 60046361
[ 0.120000] f00000010 e00000011 606402b4 00000000
[ 0.120000] Call Trace:
[ 0.120000] [<6003b6e5>] ? os_is_signal_stack+0×15/0×30 [ 0.120000] [<60080115>] ? printk+0×0/0x9b
[ 0.120000] [<6001f677>] ? show_stack.cold+0xa7/0×110 [ 0.120000] [<600385a0>] ? os_pipe+0×0/0xd0
[ 0.120000] [<60046361>] ? warn.cold+0xc/0×39 [ 0.120000] [<6004645a>] ? warn_slowpath_fmt+0xcc/0xe2
[ 0.120000] [<6004638e>] ? warn_slowpath_fmt+0×0/0xe2
[ 0.120000] [<6030ac67>] ? misc_open+0×187/0x1d0
[ 0.120000] [<601504b0>] ? exact_match+0×0/0×10 [ 0.120000] [<60150fd1>] ? cdev_put.part.0+0×11/0×30 [ 0.120000] [<601510bd>] ? chrdev_open+0xcd/0x1a0
[ 0.120000] [<60150ff0>] ? chrdev_open+0×0/0x1a0
[ 0.120000] [<60147baa>] ? do_dentry_open+0x31a/0×430 [ 0.120000] [<6015c5b5>] ? path_openat+0×395/0×1660 [ 0.120000] [<60021f9e>] ? copy_chunk_to_user+0x1e/0×30 [ 0.120000] [<60021f80>] ? copy_chunk_to_user+0×0/0×30 [ 0.120000] [<600221ce>] ? do_op_one_page+0xfe/0×160 [ 0.120000] [<60021fea>] ? strncpy_chunk_from_user+0x3a/0×60 [ 0.120000] [<600220d0>] ? do_op_one_page+0×0/0×160 [ 0.120000] [<6015c220>] ? path_openat+0×0/0×1660 [ 0.120000] [<6015ecd9>] ? do_filp_open+0×89/0xf0
[ 0.120000] [<6016d670>] ? expand_files+0×0/0×220 [ 0.120000] [<6016de6e>] ?
alloc_fd+0x3e/0×170 [ 0.120000] [<604f0de0>] ? ptrace+0×0/0xd0
[ 0.120000] [<604f0de0>] ? ptrace+0×0/0xd0
[ 0.120000] [<6014916d>] ? do_sys_open+0x17d/0×240 [ 0.120000] [<604c2110>] ? __waitpid+0×0/0xa0
[ 0.120000] [<604f0de0>] ? ptrace+0×0/0xd0
[ 0.120000] [<60021f1f>] ? handle_syscall+0x6f/0xa0
[ 0.120000] [<6003e7c6>] ? userspace+0×366/0×500 [ 0.120000] [<6001de03>] ? new_thread_handler+0xb3/0xc0
[ 0.120000]
[ 0.120000] —[ end trace 8db4519d8907f435 ]— [ 0.140000] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[...]

18.07.20203237PackagesBuild FailureVery LowHighumdns: fails to compile with gcc10TrunkUnconfirmed Task Description

Try to compile umdns with gcc10 and it will break with following error:

service.c:240:10: error: ‘strcpy’ offset 6 from the object at ‘b’ is
out of the bounds of referenced subobject ‘name’ with type ‘uint8_t[]’ {aka ‘unsigned char[]’} at offset 6 [-Werror=array-bounds]

More detailed error:
https://github.com/berlin-open-wireless-lab/DAWN/issues/109#issuecomment-657483908

21.09.20203355PackagesBug ReportVery LowLowUMDNS: does not start on master with seccomp TrunkUnconfirmed Task Description

UMDNS does not start on master with seccomp
this has bee tested on ramips (dir878 and redmiac2100)
if i comment out
# procd_set_param seccomp /etc/seccomp/umdns.json
from /etc/init.d/umdns

it works

05.12.20203491PackagesBug ReportVery LowLowumDNS fails to compile with GCC10 possible CVETrunkUnconfirmed Task Description

A warning (treated as error) is emitted from GCC10 when compiling umDNS (object at ‘b’ is out of the bounds). This could also turn into a CVE.

[ 40%] Building C object CMakeFiles/umdns-lib.dir/service.c.o
/home/ByteEnable/temp/openwrt-master/staging_dir/toolchain-arm_cortex-a9+vfpv3-d16_gcc-10.2.0_musl_eabi/bin/arm-openwrt-linux-muslgnueabi-gcc   -Os -pipe  -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98=umdns-2020-10-26-59e4fc98 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -I/home/ByteEnable/temp/openwrt-master/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/usr/include -DNDEBUG   -Os -ggdb -Wall -Werror --std=gnu99 -Wmissing-declarations -o CMakeFiles/umdns-lib.dir/service.c.o -c /home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98/service.c
/home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98/service.c: In function 'service_load_blob':
/home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98/service.c:242:10: error: 'strncpy' offset 6 from the object at 'b' is out of the bounds of referenced subobject 'name' with type 'uint8_t[]' {aka 'unsigned char[]'} at offset 6 [-Werror=array-bounds]
  242 |  s->id = strncpy(d_id, blobmsg_name(b), n);
      |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /home/ByteEnable/temp/openwrt-master/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/usr/include/libubus.h:23,
                 from /home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98/service.c:23:
/home/ByteEnable/temp/openwrt-master/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/usr/include/libubox/blobmsg.h:43:10: note: subobject 'name' declared here
   43 |  uint8_t name[];
      |          ^~~~
cc1: all warnings being treated as errors
make[6]: *** [CMakeFiles/umdns-lib.dir/build.make:121: CMakeFiles/umdns-lib.dir/service.c.o] Error 1
make[6]: Leaving directory '/home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98'
make[5]: *** [CMakeFiles/Makefile2:124: CMakeFiles/umdns-lib.dir/all] Error 2
make[5]: Leaving directory '/home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98'
make[4]: *** [Makefile:149: all] Error 2
make[4]: Leaving directory '/home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98'
make[3]: *** [Makefile:50: /home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98/.built] Error 2
make[3]: Leaving directory '/home/ByteEnable/temp/openwrt-master/package/network/services/umdns'
time: package/network/services/umdns/compile#0.64#0.16#0.00
    ERROR: package/network/services/umdns failed to build.
make[2]: *** [package/Makefile:114: package/network/services/umdns/compile] Error 1
make[2]: Leaving directory '/home/ByteEnable/temp/openwrt-master'
make[1]: *** [package/Makefile:108: /home/ByteEnable/temp/openwrt-master/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/ByteEnable/temp/openwrt-master'
make: *** [/home/ByteEnable/temp/openwrt-master/include/toplevel.mk:242: world] Error 2
09.12.20203500Base systemBug ReportVery LowLowumbim: problem registering to network with Huawei K5150...TrunkUnconfirmed Task Description

Hi!

The problem is that the card registers to network in a weird way and thus the mbim.sh script stops and doesn’t continue attaching to network, ...

The problem has been detected on a Huawei EchoLife HG556a (version C) but seems a general problem.

Also, the problem was with a ID 12d1:1f16 Huawei Technologies Co., Ltd. K5150 LTE modem but I believe that it can happens on other mbim devices as well.

I believe the problem is more related to the fact that the SIM is from a virtual movile operator which is then using the network from the real operator: Orange, but we didn’t test any other SIMs, so we don’t know if this is more general, if needed we could try to get some other SIMs for testing.

The problem is that when we do the network registration with umbim it gives an error, so it stops there, so we tried to remove that check like this:

— mbim.sh.orig 2020-12-04 15:11:47.000000000 +0100
+++ mbim.sh 2020-12-03 16:30:34.000000000 +0100
@@ -99,11 +99,7 @@

      tid=$((tid + 1))
      echo "mbim[$$]" "Register with network"

- umbim $DBG -n -t $tid -d $device registration || {
- echo “mbim[$$]” “Subscriber registration failed” - proto_notify_error “$interface” NO_REGISTRATION
- return 1
- }
+ umbim $DBG -n -t $tid -d $device registration

      tid=$((tid + 1))
      echo "mbim[$$]" "Attach to network"

So that it would continue no matter how the network registration felt, and it worked giving us this log:

Wed Dec 9 11:41:27 2020 daemon.notice netifd: wwan (1405): wwan[1405] Using proto:wwan device:/dev/cdc-wdm0 iface:wwan0 desc:Huawei K5150 composite
Wed Dec 9 11:41:27 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): mbim[1405] Reading capabilities
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): devicetype: 0002 - removable
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): cellularclass: 0001
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): voiceclass: 0001 - no-voice
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): simclass: 0002
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): dataclass: 8000003F
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): smscaps: 0003
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): controlcaps: 0001
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): maxsessions: 0003
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): deviceid: 860112021925542
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): firmwareinfo: V8.1
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): hardwareinfo: CH1K5150M
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): mbim[1405] Checking pin
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): Pin Unlocked
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): mbim[1405] Checking subscriber
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): readystate: 0001 - initialized
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): simiccid: 8934250220007795837F
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): subscriberid: 214035090779583
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): mbim[1405] Register with network
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): nwerror: 0000 - unknown
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): registerstate: 0004 - roaming
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): registermode: 0001 - automatic
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): availabledataclasses: 0020 - lte
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): currentcellularclass: 0001 - gsm
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): provider_id: 21403
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): provider_name: Orange
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): roamingtext: (null)
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): mbim[1405] Attach to network
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): nwerror: 0000 - unknown
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): packetservicestate: 0002 - attached
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): uplinkspeed: 0
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): downlinkspeed: 0
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): mbim[1405] Connect to network
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): sessionid: 0
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): activationstate: 0001 - activated
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): voicecallstate: 0000 - none
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): nwerror: 0000 - unknown
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): iptype: 0003 - ipv4v6
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): mbim[1405] Connected, starting DHCP

Network connection works ok like this and we can access Inet without any problem.

So... either umbim is not exiting with the right exit code, maybe because of that unknown status it says there, or if the exit code is ok, then we should somehow do farder tests and continue like we did, as the connection is good anyway.

This was also tested using latest available snapshot builds with the same results, we have gone back to stable (these logs are from 19.07.4) as the snapshot build was having trouble with the wifi on this router, but the umbim problem and the solution we applied worked the same on snapshot as it does on stable.

If you need any other info, just ask.

Regards.

21.04.20192248PackagesFeature RequestVery LowLowuhttpd: implement ubus event listener via Server-Sent E...TrunkWaiting on reporter Task Description

Usecase:
As a web developer I would benefit from having the possibility to send events from the server to the browser so the browser can react to it dynamically.

The proposed implementation is the leanest possible.

A SSE (Server-Sent Event) is a simple protocol on top of basic http polling to send messages from the http server to the browser for the purpose of instant notifications.
It comes implemented in all major browsers, including mobile.

If paired with `ubus listen` or `ubus monitor`, a seamless integration with the ubus pipeline could be implemented.

We tried to implement it by adding an option in this line of code but got stuck in our lack of corutine mechanisms and how uhttpd works.

The difference with the call and list options is that this one should be long-lived and progressive, preventing the dreaded polling from the web (also, better us of resources, more elegant implementation, etc).

As an example, a very basic implementation of a SSE server in php:

<?php
header('Content-Type: text/event-stream');
header('Cache-Control: no-cache');

echo "data: \"hello world\"" . PHP_EOL;
echo PHP_EOL;
echo "data: \"goodbye world\"" . PHP_EOL;
echo PHP_EOL;
ob_flush();
flush();

An example of a very basic implementation of a SSE client in HTML:

<html>
	<body></body>
	<script>
	var source = new EventSource("demo_sse.php");
	source.onmessage = function(event) {
		document.getElementById("result").innerHTML += event.data + "<br>";
	}; 
	</script>
</html>
02.06.20203144Base systemBug ReportVery LowLowuhttpd: https redirect should be to a configurable host...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: *all*
- Software versions of OpenWrt/LEDE release, packages, etc.: *master ~2 weeks old*
- Steps to reproduce: *see below*

Install luci-ssl. It will configure uhttpd to listen on port 443 and redirect http to https. In particular, it will add to /etc/config/uhttpd:

 option redirect_https '1'

However, the semantics of this redirect are wrong if a non-self-signed certificate is used.

In particular, it is now a boolean option, and always gets the redirect target from the Host: header. That is, it redirects http://192.168.1.1/ to https://192.168.1.1/, and, assuming that openwrt.mydomain.ru resolves to 192.168.1.1, it will also redirect http://openwrt.mydomain.ru/ to https://openwrt.mydomain.ru/.

What I want is a string option that specifies the domain for redirects. I.e., I should be able to set something like this:

 option redirect_https_domain 'openwrt.mydomain.ru'

and then both http://192.168.1.1/ and http://openwrt.mydomain.ru/ and http://anything.that.resolves.to.192.168.1.1.com/ should redirect to https://openwrt.mydomain.ru/.

22.12.20171239PackagesBug ReportVery LowLowuhttpd package comes with /etc/config/uhttpd file that ...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of LEDE release, packages, etc.
- Steps to reproduce

root@OpenWRT:~# cat /etc/openwrt_release
DISTRIB_ID=’OpenWrt’ DISTRIB_RELEASE=’SNAPSHOT’ DISTRIB_REVISION=’r5601-efa22b1’ DISTRIB_TARGET=’ar71xx/generic’ DISTRIB_ARCH=’mips_24kc’ DISTRIB_DESCRIPTION=’OpenWrt SNAPSHOT r5601-efa22b1’ DISTRIB_TAINTS=’’ root@OpenWRT:~# cat /etc/board.json
{

"model": {
	"id": "tl-wdr4300",
	"name": "TP-Link TL-WDR3600 v1"
},

...

to reproduce:
- install lede
- run lua/luci, modify configuration somehow and save, so that /etc/config/uhttpd is overwritten
- flash corresponding sysupgrade.bin with “[x] keepsettings” - ssh root@OpenWRT.localnet opkg update
- ssh root@OpenWRT.localnet opkg install luci-ssl strace snmpd snmp-mibs lsof rsyslog diffutils vim less

note in output:

Collected errors:
* resolve_conffiles: Existing conffile /etc/config/uhttpd is different from the conffile in the new package. The new conffile will be placed at /etc/config/uhttpd-opkg.
* resolve_conffiles: Existing conffile /etc/config/luci is different from the conffile in the new package. The new conffile will be placed at /etc/config/luci-opkg.

The contents of uhttpd-opkg and uhttpd are quite the same, the lua/luci version being without comments and with ‘quoted’ values (see attached file).

A resolution of “wont fix” would be absolutely acceptable.

Kind regards,
Dominik

02.01.20213554PackagesBug ReportVery LowLowuhttpd non-English directory displays garbled character...TrunkUnconfirmed Task Description

uhttpd non-English directory displays garbled characters。

Modify uh_file_dirlist function

ustream_printf(cl→us, “Content-Type: text/html\r\n\r\n”);

ustream_printf(cl→us, “Content-Type: text/html; charset=utf-8\r\n\r\n”);

This way all languages can be displayed perfectly!

03.05.20213780Base systemBug ReportVery LowLowuhttpd error "Request Entity Too Large" on luci page af...TrunkUnconfirmed Task Description

Router: WRT1900AC v1 (mamba)
Openwrt: my build, r16521, includes luci-ssl, tvheadend server and dvb driver

Luci page ok at first.
After configuring tvheadend, including accounts, dvb muxes, channels, etc., luci page won’t open anymore. uhttpd error: Request Entity Too Large.
Starts working again after clearing browser cookies. Some of those cookies are set by tvheadend.

02.01.20213559Base systemBug ReportMediumLowuclient-fetch fails to download more than 2 filesAllNew Task Description

uclient-fetch has support for downloading several files:

uclient-fetch URL1 URL2 URL3 ...

However, this only works for the first two URLs. The third and above URLs simply cause uclient-fetch to re-download the second URL again.

In addition, only the first URL is checked for validity. If a subsequent URL is invalid, then the previous URL is re-used:

uclient-fetch http://example.com invalid

This example will download http://example.com twice.

24.02.20202852Base systemBug ReportVery LowLowuclient-fetch (wget) buggy with http-authTrunkUnconfirmed Task Description

When doing a wget (via uclient-fetch) including user/password (http-auth), on my server I see following log from apache2:

172.16.0.1 - - [24/Feb/2020:09:44:51 +0100] “GET xxxxxx.php?mac=AA:BB:CC:DD:EE:FF HTTP/1.1” 401 596 “-” “uclient-fetch” 172.16.0.1 - username [24/Feb/2020:09:44:52 +0100] “GET xxxxxx.php?mac=AA:BB:CC:DD:EE:FF HTTP/1.1” 200 212 “-” “uclient-fetch”

This is reproducable; looks like first a GET without auth, and then a retry incl. auth.

wget from busybox works flawlessly.

26.05.20203125Base systemBug ReportVery LowLowuclibc++ doesn't build when generated file names are to...TrunkUnconfirmed Task Description

I was having trouble building uClibc++ in Openwrt. I figured out that the problem was that the LIBSUP_DEP variable, which is a filename that gets created during the build, was too long for my file system. The name generated was over 150 char long and my fs has a limit of 143. I guess this because I have an encrypted homedir. Anyway, I analyzed the build system of uClibc++, and it seems to vary with the file location for libsupc++.a which is used to extract a bunch of symbols and create the static lib.

I had configured my build to build for a Turris Omnia.

Software versions: master branch of OpenWrt

Steps to reproduce:
1. Configure to build image for Turris Omnia.
2. Build with: `make package/libs/uclibc++/compile -j1 V=sc`

My proposed fix: https://bugs.busybox.net/show_bug.cgi?id=12951

If this patch get’s accepted upstream, we should add a patch to package/libs/uclibc++/patches/ for this.

 


20.09.20181859Base systemBug ReportVery LowLowuclibc++ crashes when trying to splice to empty listTrunkUnconfirmed Task Description

Right now, each program seems to crash which uses splice to move an item to another list (which is empty):

  #include <list>
  
  int main()
  {
  	std::list<int> empty_list;
  	std::list<int> two_item_list;
  
  	two_item_list.push_back(1);
  	two_item_list.push_back(2);
  
  	empty_list.splice(empty_list.end(), two_item_list, two_item_list.begin());
  
  	return 0;
  }

It crashes with:

  4         {
  1: two_item_list = {list_start = 0x1, list_end = 0x77f0d57f <blobmsg_add_field+42>, elements = 2012192832, a = {<No data fields>}}
  2: empty_list = {list_start = 0x0, list_end = 0x77ec51ec <operator new(unsigned int)+44>, elements = 32, a = {<No data fields>}}
  (gdb) n
  151             std::list<int> empty_list;
  1: two_item_list = {list_start = 0x1, list_end = 0x77f0d57f <blobmsg_add_field+42>, elements = 2012192832, a = {<No data fields>}}
  2: empty_list = {list_start = 0x0, list_end = 0x77ec51ec <operator new(unsigned int)+44>, elements = 32, a = {<No data fields>}}
  (gdb) n
  5             std::list<int> two_item_list;
  1: two_item_list = {list_start = 0x1, list_end = 0x77f0d57f <blobmsg_add_field+42>, elements = 2012192832, a = {<No data fields>}}
  2: empty_list = {list_start = 0x77eb0910, list_end = 0x77eb0910, elements = 0, a = {<No data fields>}}
  (gdb) n
  6             two_item_list.push_back(1);
  1: two_item_list = {list_start = 0x77eb0930, list_end = 0x77eb0930, elements = 0, a = {<No data fields>}}
  2: empty_list = {list_start = 0x77eb0910, list_end = 0x77eb0910, elements = 0, a = {<No data fields>}}
  (gdb) n
  7             two_item_list.push_back(2);
  1: two_item_list = {list_start = 0x77eb0950, list_end = 0x77eb0930, elements = 1, a = {<No data fields>}}
  2: empty_list = {list_start = 0x77eb0910, list_end = 0x77eb0910, elements = 0, a = {<No data fields>}}
  (gdb) n
  8             empty_list.splice(empty_list.end(), two_item_list, two_item_list.begin());
  1: two_item_list = {list_start = 0x77eb0950, list_end = 0x77eb0930, elements = 2, a = {<No data fields>}}
  2: empty_list = {list_start = 0x77eb0910, list_end = 0x77eb0910, elements = 0, a = {<No data fields>}}
  (gdb) n
  
  Program received signal SIGSEGV, Segmentation fault.
  std::list<int, std::allocator<int> >::splice (i=..., x=..., position=..., this=0x7ffffb98) at /usr/src/openwrt/staging_dir/target-mips_24kc_musl-1.1.16/usr/include/uClibc++/list:608
  608                             i.link_struct()->previous->next = i.link_struct()->next;

The reported line is

  605                 //Insert at begining special case
  606                 if(position == begin()){
  607 
  608                         i.link_struct()->previous->next = i.link_struct()->next;
  609                         i.link_struct()->next->previous = i.link_struct()->previous;
  610 
  611                         i.link_struct()->previous = 0;
  612                         i.link_struct()->next = position.link_struct();
  613                         position.link_struct()->previous = i.link_struct();
  614 
  615                         list_start = i.link_struct();
  616 
  617                         --x.elements;
  618                         ++elements;
  619                         return;
  620                 }
09.04.20202985Base systemBug ReportVery LowLowuci unbound forward zone portTrunkUnconfirmed Task Description

uci compile two different config options for unbound zone clause based on provided string value for list server.
If port is provided using ‘@’ charactes it assumes it’s a host rather than address and compile option to ' forward-host’.
It should be allow to use ‘@’ character in addition to IP address and compile option to ‘forward-addr’.

config zone

      list zone_name 'myzone.loc.'
      list server '10.1.0.2'
      list server '10.1.0.1'

compiles to

forward-zone:

name: myzone.loc.
forward-addr: 10.1.0.1@53
forward-addr: 10.1.0.2@53

config zone

      list zone_name 'myzone.loc.'
      list server '10.1.0.2@5053'
      list server '10.1.0.1@5053'

compiles to

forward-zone:

name: myzone.loc.
forward-host: 10.1.0.1@5053
forward-host: 10.1.0.2@5053

config zone

      list server '10.1.0.2'
      list server '10.1.0.1'

OpenWrt SNAPSHOT r12784-5562c5add2

02.02.20181321PackagesBug ReportVery LowLowUCI potential invalid memory access when updating exist...TrunkUnconfirmed Task Description

- Software versions

UCI 2018-01-01

- Device problem occurs on

There is a potential memory leak when updating existing section in list.c:709

Return pointer from realloc may not be the same as ptr→s. Due to realloc mechanism, pointers value from ptr→s→options are copied to the ptr→last. However, those pointers (ptr→last→s→options) are pointing back to the ptr→s which has been freed.

Below are steps to reproduce.

- Steps to reproduce

 

Given a config file like that

cat /etc/config/network
config interface wan

Given test codes like that

#include <uci.h>

int main(int argc, const char *argv[])
{
    struct uci_context *uci_ctx = uci_alloc_context();
    struct uci_ptr ptr          = {0};
    ptr.package                 = "network";
    ptr.section                 = "wan";
    ptr.value                   = "interface";
    uci_lookup_ptr(uci_ctx, &ptr, NULL, false);
    uci_set(uci_ctx, &ptr);
    uci_save(uci_ctx, ptr.p);
    uci_commit(uci_ctx, &ptr.p, false);
    uci_free_context(uci_ctx);

    return 0;
}

Runs like that

cd UCI_PROJECT_ROOT
mkdir build
cmake ..
make
valgrind ./test/test_mem_leak_section
.... CTRL-C after a while ....

Here is the output of valgrind before the hotfix below

==1567== Memcheck, a memory error detector
==1567== Copyright (C) 2002-2013, and GNU GPL'd, by Julian Seward et al.
==1567== Using Valgrind-3.10.1 and LibVEX; rerun with -h for copyright info
==1567== Command: ./test/test_mem_leak_section
==1567== 
==1567== Invalid write of size 8
==1567==    at 0x4E3946B: uci_list_del (uci_internal.h:116)
==1567==    by 0x4E3946B: uci_free_element (list.c:71)
==1567==    by 0x4E394F4: uci_free_section (list.c:211)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a850 is 32 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
==1567== Invalid write of size 8
==1567==    at 0x4E3946E: uci_list_del (uci_internal.h:117)
==1567==    by 0x4E3946E: uci_free_element (list.c:71)
==1567==    by 0x4E394F4: uci_free_section (list.c:211)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a858 is 40 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
==1567== Invalid read of size 8
==1567==    at 0x4E394F8: uci_free_section (list.c:210)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a850 is 32 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
==1567== Invalid read of size 4
==1567==    at 0x4E39486: uci_free_option (list.c:97)
==1567==    by 0x4E394F4: uci_free_section (list.c:211)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a878 is 72 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
==1567== Invalid read of size 8
==1567==    at 0x4E39456: uci_free_element (list.c:69)
==1567==    by 0x4E394F4: uci_free_section (list.c:211)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a868 is 56 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
==1567== Invalid read of size 8
==1567==    at 0x4E3945F: uci_free_element (list.c:70)
==1567==    by 0x4E394F4: uci_free_section (list.c:211)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a850 is 32 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
==1567== Invalid free() / delete / delete[] / realloc()
==1567==    at 0x4C2BDEC: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E394F4: uci_free_section (list.c:211)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a850 is 32 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
^C
==1567== 
==1567== HEAP SUMMARY:
==1567==     in use at exit: 973 bytes in 17 blocks
==1567==   total heap usage: 189 allocs, 408,927 frees, 8,483 bytes allocated
==1567== 
==1567== LEAK SUMMARY:
==1567==    definitely lost: 0 bytes in 0 blocks
==1567==    indirectly lost: 0 bytes in 0 blocks
==1567==      possibly lost: 0 bytes in 0 blocks
==1567==    still reachable: 973 bytes in 17 blocks
==1567==         suppressed: 0 bytes in 0 blocks
==1567== Rerun with --leak-check=full to see details of leaked memory
==1567== 
==1567== For counts of detected and suppressed errors, rerun with: -v
==1567== ERROR SUMMARY: 2043783 errors from 7 contexts (suppressed: 0 from 0)

- Hot fix

-			ptr->last = NULL;
-			ptr->last = uci_realloc(ctx, ptr->s, sizeof(struct uci_section));
-			ptr->s = uci_to_section(ptr->last);
-			uci_list_fixup(&ptr->s->e.list);
+			ptr->last = (struct uci_element *) ptr->s;

Please take a look the attachment. It includes my hot fix for this issue and corresponding demo codes as illustrated above.

I am not sure how to “update” the “uci_options” associated to the “uci_section”. So, I simply omit and replace the realloc part.

Tested by valgrind again

valgrind ./test/test_mem_leak_section 
==1749== Memcheck, a memory error detector
==1749== Copyright (C) 2002-2013, and GNU GPL'd, by Julian Seward et al.
==1749== Using Valgrind-3.10.1 and LibVEX; rerun with -h for copyright info
==1749== Command: ./test/test_mem_leak_section
==1749== 
==1749== 
==1749== HEAP SUMMARY:
==1749==     in use at exit: 0 bytes in 0 blocks
==1749==   total heap usage: 392 allocs, 392 frees, 23,574 bytes allocated
==1749== 
==1749== All heap blocks were freed -- no leaks are possible
==1749== 
==1749== For counts of detected and suppressed errors, rerun with: -v
==1749== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)


02.12.20181981Base systemBug ReportVery LowLowUCI import -m failes if invoked multiple times without ...TrunkUnconfirmed Task Description

Hello, I’m using somewhat old LEDE, but this does not seem to make deffierence. Correct me if I’m wrong.
I installed fresh version of UCI:

root@router:~# opkg info uci
Package: uci
Version: 2018-08-11-4c8b4d6e-1
Depends: libc, libuci
Status: install user installed
Section: base
Architecture: mips_24kc
Size: 7166
Filename: uci_2018-08-11-4c8b4d6e-1_mips_24kc.ipk
Description: Utility for the Unified Configuration Interface (UCI)
Installed-Time: 1543713053

Now, the bug.
I have a small test file with some `config`s in it. They’re named.
If I do import multiple times it results if an error.

Here’s my shell log that should to reproduce this issue:

root@router:~# uci commit                           # make sure there're no pending changes
root@router:~# rm -f /etc/config/import-test        # clear the target cofnig file for a clean test
root@router:~# cat import-test                      # dispay the file we're about to import
config host 'a'
	option name 'a'

config host 'b'
	option name 'b'
root@router:~# uci changes                               # demonstrate there're no pending changes
root@router:~# uci -m import import-test < import-test   # invoke the import
root@router:~# uci changes                               # still no changes after first import
root@router:~# uci -m import import-test < import-test   # import import for the second time
root@router:~# uci changes                               # wow, now there are some changes! this is not expected
import-test.a='host'
import-test.b='host'
root@router:~# uci -m import import-test < import-test   # call import for the third time - and it fails with an error
uci: Parse error (option/list command found before the first section) at line 2, byte 1

This looks like a bug to me. Thoughts?

22.01.20202764Base systemBug ReportVery LowHighucert: ucert -A output is invalidTrunkUnconfirmed Task Description

ucert -A generates something that ucert cannot read back.

This happens because ucert -A appears to be appending several libubox “blobs” together, but cert_load() uses libubox’ blob_parse_untrusted() which expects to get a buffer with a single blob inside, and no padding.

Thus a valid ucert file with certificate and signature will be *bigger* than the first blob inside it, and blob_parse_untrusted() in libubox won’t even try to process it.

Since this renders ucert useless, severity is set to high.

This is related to  FS#2762  and FS#2763

22.01.20202763Base systemBug ReportVery LowLowucert: missing tests for certificate chains and ucert -...TrunkUnconfirmed Task Description

ucert is missing test cases for:

ucert -A
ucert -D on the output of ucert -A.

This is very important because it would have flagged the fact that currently ucert -A generates something that ucert will not read back, in fact rendering signed sysupgrade images unusable without sysupgrade -F.

15.09.20192495Base systemBug ReportVery LowLowucert rebuild within SDK segfaults on Debian 10 and Ubu...TrunkNew Task Description

Using the 19.07-SNAPSHOT SDK build Sept 12 (last successful build by the buildbots it looks like), and current openwrt-19.07 branch on the feeds, if doing signed build, the build fails due to ucert segfaulting (this is on Debian 10).

ldd staging_dir/host/bin/ucert shows:

      linux-vdso.so.1 (0x00007ffd03d63000)
      libubox.so => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libubox.so (0x00007ff0db3b0000)
      libblobmsg_json.so => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libblobmsg_json.so (0x00007ff0db3a8000)
      libjson-c.so.2 => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libjson-c.so.2 (0x00007ff0db398000)
      libc.so.6 => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libc.so.6 (0x00007ff0daff8000)
      /lib64/ld-linux-x86-64.so.2 (0x00007ff0db3c8000)

I’m wondering if the problem is due to using host instead SDK libraries.


09.05.20181536Base systemBug ReportVery LowMediumUbus: not creating needed /var/run directoryAllUnconfirmed Task Description

/sbin/init create /tmp/run directory.
ubus uses /var/run directory that’s normally linked to /tmp aka /tmp/run and starts up.

If by accident /var is deleted and the router is rebooted the system hangs forever.
It does not help to create an empty /var directory /var/run is not created by ubus.

Console shows: “procd - early -” and afterwards “procd - ubus -”
The needed directories are created later inside “/etc/rc.d/S10boot” aka “/etc/init.d/boot”

10.07.20203221PackagesBug ReportLowLowubox: validate.c: Link-Local IPv6 with interface ID not...AllNew Task Description

validate.c uses inet_pton for identifying IPv6 addresses [1], and this seems to not understand interface identifiers as used for Link-local IPv6 addresses.

Reproduce:

root@FFF-GW-Adrian:~# /sbin/validate_data host fdff::1
host - fdff::1 = true
root@FFF-GW-Adrian:~# /sbin/validate_data host fe80::1
host - fe80::1 = true
root@FFF-GW-Adrian:~# /sbin/validate_data host fe80::1%br-mesh
host - fe80::1%br-mesh = false

This is a problem practically whenever validata_data is used to check uci values.

For example, it is not possible to use a link-local address for specifying an NTP server:

https://github.com/openwrt/openwrt/blob/master/package/utils/busybox/files/sysntpd#L33

If ‘server:list(host)’ is changed to ‘server:list(string)’ there, it obviously works fine, as it’s just the validation.

[1] https://git.openwrt.org/?p=project/ubox.git;a=blob;f=validate/validate.c;h=e72b8117ecd8b680778b0f5c7637ed6546a7736b;hb=HEAD#l402

19.02.20181374PackagesBug ReportVery LowHighubox: logd memory leak AllUnconfirmed Task Description

I checked the use of memory with `top` command and saw that the logd was consuming memory disproportionately (around 60MB).

```
PID PPID USER STAT VSZ VSZ %CPU COMMAND
971 1 root S 59768 48% 0% /sbin/logd -S 64
```

- There was no remote log configured.
- I was using logread -f for a long time.
- When doing an /etc/init.d/log restart the consumed memory returned to normality.
- ubox version:

```
PKG_SOURCE_DATE:=2017-09-01
PKG_SOURCE_VERSION:=b1bc8d5fb874cdd22701a08d0fb0de4330f86814
PKG_MIRROR_HASH:=b07e750d941d691e2745aa3a058e504966b15d1db5636162dc686bad275eb296
```


19.09.20203346PackagesBuild FailureVery LowMediumUbox invalid memory access (does not build with gcc10)TrunkUnconfirmed Task Description

See: https://git.openwrt.org/?p=project/ubox.git;a=blob;f=kmodloader.c;h=6f06ee3939f2f3e151357d33cfd165603cb40e4d;hb=HEAD#l699

Prints:

In function 'main_insmod',
    inlined from 'main' at /home/openwrt/openwrt-lam/build/archer-c7-v2eu/build_dir/target-mips_24kc_musl/ubox-2019-12-31-0e34af14/kmodloader.c:1062:10:
/home/openwrt/openwrt-lam/build/archer-c7-v2eu/build_dir/target-mips_24kc_musl/ubox-2019-12-31-0e34af14/kmodloader.c:734:13: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
  734 |  options[0] = 0;
      |  ~~~~~~~~~~~^~~
/home/openwrt/openwrt-lam/build/archer-c7-v2eu/build_dir/target-mips_24kc_musl/ubox-2019-12-31-0e34af14/kmodloader.c: In function 'main':
/home/openwrt/openwrt-lam/build/archer-c7-v2eu/build_dir/target-mips_24kc_musl/ubox-2019-12-31-0e34af14/kmodloader.c:727:12: note: at offset 0 to an object with size 0 allocated by 'malloc' here
  727 |  options = malloc(len);
      |            ^~~~~~~~~~~

Fix im using for my builds is attached.

Kind regards
MartB

19.01.20181284Base systemBug ReportVery LowLowuboot-kirkwood does not speak MMC on Pogoplug v4TrunkUnconfirmed Task Description

Testing on a Pogoplug V4 with the u-boot committed in f5d267df638d7adc6654f4a1a3d7c7557cafd759, there is no MMC support despite that 010-pogoplug_v4.patch includes kirkwood_mmc.c and friends. Boot messages are simply

U-Boot 2017.09 (Jan 19 2018 - 21:51:49 +0000)
Pogoplug V4

SoC:   Kirkwood 88F6281_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  128 MiB
MMC:   
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   egiga0
Error: egiga0 address not set.

On the other hand, the uboot shipped from https://forum.doozan.com/read.php?3,7477,7553 understands MMC. Its boot messages are

U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700)
Pogoplug V4

SoC:   Kirkwood 88F6192_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  128 MiB
MMC:   MVEBU_MMC: 0
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
28.03.2017659Base systemBug ReportVery LowLowuboot-kirkwood (at least) fails to build if swig is ins...TrunkUnconfirmed Task Description

Building LEDE head (reboot-3906-g2a2dfb2be7) on a machine without python development headers but with swig in $PATH yields

  HOSTLD  tools/dumpimage
  HOSTCC  tools/mkimage.o
  HOSTLD  tools/mkimage
swig -python -o tools/libfdt_wrap.c lib/libfdt/libfdt.swig
LDFLAGS="" python ./lib/libfdt/setup.py \
        "-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer    -include ./include/libfdt_env.h -idirafterinclude -idirafter./arch/arm/include -I./lib/libfdt -I./tools -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -D_GNU_SOURCE " lib/libfdt/fdt.c lib/libfdt/fdt_ro.c lib/libfdt/fdt_rw.c lib/libfdt/fdt_strerror.c lib/libfdt/fdt_wip.c lib/libfdt/fdt_region.c lib/libfdt/fdt_sw.c tools/libfdt_wrap.c
tools/libfdt_wrap.c:130:21: fatal error: Python.h: No such file or directory
 # include <Python.h>
                     ^
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
tools/Makefile:123: recipe for target 'tools/_libfdt.so' failed
make[5]: *** [tools/_libfdt.so] Error 1
Makefile:1229: recipe for target 'tools' failed
make[4]: *** [tools] Error 2
make[4]: Leaving directory '/tank/openwrt/scratch/builder-nwftest/build_dir/target-arm_xscale_musl_eabi/u-boot-pogo_v4/u-boot-2017.03'

As I don’t believe there are any in-tree consumers of the python libfdt bindings, adding the following patch file, which just removes the test for swig and therefore acts as if it is never present, should do the right thing:

$ cat package/boot/uboot-kirkwood/patches/201-no-python-fdt.patch 
--- u-boot-2017.03/tools/Makefile.orig	2017-03-28 03:11:34.081325904 +0000
+++ u-boot-2017.03/tools/Makefile	2017-03-28 03:13:09.225349051 +0000
@@ -112,10 +112,6 @@
 fit_info-objs   := $(dumpimage-mkimage-objs) fit_info.o
 fit_check_sign-objs   := $(dumpimage-mkimage-objs) fit_check_sign.o
 
-# Build a libfdt Python module if swig is available
-# Use 'sudo apt-get install swig libpython-dev' to enable this
-hostprogs-y += \
-	$(if $(shell which swig 2> /dev/null),_libfdt.so)
 _libfdt.so-sharedobjs += $(LIBFDT_OBJS)
 libfdt:
 
09.10.20192540KernelBug ReportVery LowMediumUBNT-ERX: hwnat = very slow "tls shaking"TrunkUnconfirmed Task Description

OpenWrt SNAPSHOT r11175-700e7a2eb9
UBNT-ERX (ramips)

When hwnat is turn on than no www browsing is possible
due to very, very slow “tls shaking”. This is so slow that
mostly there are timeouts. When hwnat is turn off and just software
offloading is used than it works like a charm.

29.12.20171246Base systemBug ReportVery LowLowUbnt Nanostation Loco M2 - WDS link drops out after a f...TrunkUnconfirmed Task Description

Ubnt Nanostation Loco M2 - WDS link drops out after a few hours
I have a pair of Nanostation Loco M2 access points setup as a wireless bridge over a ~1300 foot (~400M) line of sight link.
I have had LEDE 17.01.3, 17.0.4 and OpenWrt SNAPSHOT r5499-575178e / LuCI Master (git-17.343.27587-8e6b1a6).

One is setup as a WDS AP and the other is setup as a WDS Client, after a few hours (4-12 hours?) the link drops out but still says that is connected (if I go to status it shows the other AP as connected but I cannot ping or do anything else across the link).
If I restart the wireless service on the client, the connection comes right back and all is well for a 4-12 hours.
Anyone have any suggestions on where to look? Below are the kernel and system logs for the time period in question:

AP Config files:
/etc/config/network:

config interface 'lan'
	option type 'bridge'
	option ifname 'eth0'
	option proto 'static'
	option netmask '255.255.255.0'
	option ipaddr 'x.x.x.2'
	option gateway 'x.x.x.1'
	option dns 'x.x.x.1'

/etc/config/wireless:

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11g'
	option path 'pci0000:00/0000:00:00.0'
	option channel '1'
	option country 'US'
	option htmode 'HT40'
	option distance '400'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'LAN_bridge'
	option wds '1'
	option key 'SECRET'
	option encryption 'psk2+tkip+ccmp'

Client Config files:
/etc/config/network:

config interface 'lan'
	option type 'bridge'
	option proto 'static'
	option netmask '255.255.255.0'
	option ipaddr 'x.x.x.3'
	option gateway 'x.x.x.1'
	option dns 'x.x.x.1'
	option _orig_ifname 'eth0'
	option _orig_bridge 'true'
	option ifname 'eth0'
	option delegate '0'

/etc/config/wireless:

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11g'
	option path 'pci0000:00/0000:00:00.0'
	option channel '1'
	option htmode 'HT40'
	option country 'US'
	option distance '400'

config wifi-iface
	option ssid 'LAN_bridge'
	option device 'radio0'
	option mode 'sta'
	option bssid 'AP_BSSID'
	option key 'SECRET'
	option wds '1'
	option network 'lan'
	option encryption 'psk2+tkip+ccmp'

AP Syslog:

Sun Nov 26 14:01:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:11:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:21:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:31:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:41:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:51:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:01:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:11:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:21:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
**Somewhere in here the link dropped out and I rebooted the client**
Sun Nov 26 15:28:14 2017 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED ClientMAC
Sun Nov 26 15:28:14 2017 kern.info kernel: [1893620.914221] device wlan0.sta1 left promiscuous mode
Sun Nov 26 15:28:14 2017 kern.info kernel: [1893620.919427] br-lan: port 3(wlan0.sta1) entered disabled state
Sun Nov 26 15:28:52 2017 daemon.info hostapd: wlan0: STA ClientMAC IEEE 802.11: authenticated
Sun Nov 26 15:28:52 2017 daemon.info hostapd: wlan0: STA ClientMAC IEEE 802.11: associated (aid 1)
Sun Nov 26 15:28:52 2017 kern.info kernel: [1893659.422460] device wlan0.sta1 entered promiscuous mode
Sun Nov 26 15:28:52 2017 kern.info kernel: [1893659.440920] br-lan: port 3(wlan0.sta1) entered forwarding state
Sun Nov 26 15:28:52 2017 kern.info kernel: [1893659.447086] br-lan: port 3(wlan0.sta1) entered forwarding state
Sun Nov 26 15:28:53 2017 daemon.notice hostapd: wlan0: AP-STA-CONNECTED ClientMAC
Sun Nov 26 15:28:53 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: pairwise key handshake completed (RSN)
Sun Nov 26 15:28:54 2017 kern.info kernel: [1893661.440359] br-lan: port 3(wlan0.sta1) entered forwarding state
Sun Nov 26 15:31:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:41:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)

AP Kernel Log:

[1649563.614654] br-lan: port 1(eth0) entered disabled state
[1649564.612365] eth0: link up (100Mbps/Full duplex)
[1649564.617165] br-lan: port 1(eth0) entered forwarding state
[1649564.622888] br-lan: port 1(eth0) entered forwarding state
[1649566.620738] br-lan: port 1(eth0) entered forwarding state
[1652624.237670] ------------[ cut here ]------------
[1652624.242540] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.254355] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.264049] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.328632] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.335791] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  ...
[1652624.371919] Call Trace:[<80071a8c>] 0x80071a8c
[1652624.376597] [<80071a8c>] 0x80071a8c
[1652624.380290] [<80081888>] 0x80081888
[1652624.383987] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.390133] [<800818e4>] 0x800818e4
[1652624.393854] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.399981] [<80260a14>] 0x80260a14
[1652624.403663] [<80260bf8>] 0x80260bf8
[1652624.407374] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652624.413800] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652624.419701] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652624.425575] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652624.431446] [<80084448>] 0x80084448
[1652624.435130] [<80083e04>] 0x80083e04
[1652624.438821] [<800a8014>] 0x800a8014
[1652624.442508] [<8006a990>] 0x8006a990
[1652624.446194] [<80060bf4>] 0x80060bf4
[1652624.449876] 
[1652624.451557] ---[ end trace 86b60d5fad42c0e7 ]---
[1652624.456661] ------------[ cut here ]------------
[1652624.461517] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.473297] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.482988] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.547552] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.554704] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  ...
[1652624.590833] Call Trace:[<80071a8c>] 0x80071a8c
[1652624.595502] [<80071a8c>] 0x80071a8c
[1652624.599197] [<80081888>] 0x80081888
[1652624.602893] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.609038] [<800818e4>] 0x800818e4
[1652624.612760] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.618896] [<80260a14>] 0x80260a14
[1652624.622578] [<80260bf8>] 0x80260bf8
[1652624.626277] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652624.632718] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652624.638615] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652624.644489] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652624.650366] [<80084448>] 0x80084448
[1652624.654046] [<80083e04>] 0x80083e04
[1652624.657738] [<800a8014>] 0x800a8014
[1652624.661423] [<8006a990>] 0x8006a990
[1652624.665109] [<80060bf4>] 0x80060bf4
[1652624.668791] 
[1652624.670471] ---[ end trace 86b60d5fad42c0e8 ]---
[1652624.675578] ------------[ cut here ]------------
[1652624.680433] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.692211] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.701903] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.766474] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.773641] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  ...
[1652624.809756] Call Trace:[<80071a8c>] 0x80071a8c
[1652624.814426] [<80071a8c>] 0x80071a8c
[1652624.818120] [<80081888>] 0x80081888
[1652624.821816] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.827961] [<800818e4>] 0x800818e4
[1652624.831683] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.837810] [<80260a14>] 0x80260a14
[1652624.841493] [<80260bf8>] 0x80260bf8
[1652624.845192] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652624.851632] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652624.857530] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652624.863403] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652624.869275] [<80084448>] 0x80084448
[1652624.872960] [<80083e04>] 0x80083e04
[1652624.876638] [<800a8014>] 0x800a8014
[1652624.880331] [<8006a990>] 0x8006a990
[1652624.884015] [<80060bf4>] 0x80060bf4
[1652624.887697] 
[1652624.889376] ---[ end trace 86b60d5fad42c0e9 ]---
[1652624.894482] ------------[ cut here ]------------
[1652624.899340] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.911125] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.920817] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.985380] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.992546] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  ...
[1652625.028662] Call Trace:[<80071a8c>] 0x80071a8c
[1652625.033331] [<80071a8c>] 0x80071a8c
[1652625.037027] [<80081888>] 0x80081888
[1652625.040722] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652625.046868] [<800818e4>] 0x800818e4
[1652625.050589] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652625.056714] [<80260a14>] 0x80260a14
[1652625.060410] [<80260bf8>] 0x80260bf8
[1652625.064115] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652625.070555] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652625.076442] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652625.082330] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652625.088198] [<80084448>] 0x80084448
[1652625.091882] [<80083e04>] 0x80083e04
[1652625.095561] [<800a8014>] 0x800a8014
[1652625.099258] [<8006a990>] 0x8006a990
[1652625.102938] [<80060bf4>] 0x80060bf4
[1652625.106607] 
[1652625.108295] ---[ end trace 86b60d5fad42c0ea ]---
[1656961.531085] device wlan0.sta1 left promiscuous mode
[1656961.536375] br-lan: port 3(wlan0.sta1) entered disabled state
[1657000.400508] device wlan0.sta1 entered promiscuous mode
[1657000.416849] br-lan: port 3(wlan0.sta1) entered forwarding state
[1657000.423019] br-lan: port 3(wlan0.sta1) entered forwarding state
[1657002.415840] br-lan: port 3(wlan0.sta1) entered forwarding state
[1729152.802304] eth0: link down
[1729152.805769] br-lan: port 1(eth0) entered disabled state
[1729180.803335] eth0: link up (100Mbps/Full duplex)
[1729180.808173] br-lan: port 1(eth0) entered forwarding state
[1729180.813898] br-lan: port 1(eth0) entered forwarding state
[1729182.811672] br-lan: port 1(eth0) entered forwarding state
[1893620.914221] device wlan0.sta1 left promiscuous mode
[1893620.919427] br-lan: port 3(wlan0.sta1) entered disabled state
[1893659.422460] device wlan0.sta1 entered promiscuous mode
[1893659.440920] br-lan: port 3(wlan0.sta1) entered forwarding state
[1893659.447086] br-lan: port 3(wlan0.sta1) entered forwarding state
[1893661.440359] br-lan: port 3(wlan0.sta1) entered forwarding state
[1894771.793057] device wlan0.sta1 left promiscuous mode
[1894771.798391] br-lan: port 3(wlan0.sta1) entered disabled state
[1894777.535302] device wlan0.sta1 entered promiscuous mode
[1894777.547462] br-lan: port 3(wlan0.sta1) entered forwarding state
[1894777.553631] br-lan: port 3(wlan0.sta1) entered forwarding state
[1894779.546485] br-lan: port 3(wlan0.sta1) entered forwarding state
[1895148.287966] device wlan0.sta1 left promiscuous mode
[1895148.293178] br-lan: port 3(wlan0.sta1) entered disabled state
[1895148.349721] device wlan0 left promiscuous mode
[1895148.354492] br-lan: port 2(wlan0) entered disabled state
[1895150.539163] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1895150.663905] device wlan0 entered promiscuous mode
[1895153.075046] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[1895153.081886] br-lan: port 2(wlan0) entered forwarding state
[1895153.087660] br-lan: port 2(wlan0) entered forwarding state
[1895154.299110] device wlan0.sta1 entered promiscuous mode
[1895154.316512] br-lan: port 3(wlan0.sta1) entered forwarding state
[1895154.322716] br-lan: port 3(wlan0.sta1) entered forwarding state
[1895155.086003] br-lan: port 2(wlan0) entered forwarding state
[1895156.315941] br-lan: port 3(wlan0.sta1) entered forwarding state

Thanks in advance

Aaron Z


Showing tasks 101 - 150 of 1150 Page 3 of 23 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing