OpenWrt/LEDE Project

Welcome to the OpenWrt Project bug reporting and issue tracking system

Problems to be reported here are for the current OpenWrt and legacy LEDE Project’s targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to openwrt-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeveritySummaryReported InStatus  desc
28.11.20192639KernelBug ReportVery LowCriticalkernel oops when visit a invalid virtual addressTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

 youku-l2

- Software versions of OpenWrt/LEDE release, packages, etc.

 snapshot. at 
 Linux OpenWrt 4.14.155 #0 SMP Sun Nov 24 22:17:34 2019 mips GNU/Linux

- Steps to reproduce

 I don't know. but this problem occurs, from the device reboot, after several hours or one or two days, the oops occurs. 
 
BusyBox v1.31.1 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r11591-c5497ebb1c
 -----------------------------------------------------
root@OpenWrt:~# cat /sys/kernel/debug/crashlog
Time: 1574977671.59411
Modules:        pppoe@8ee64000+22f0     ppp_async@8efa2000+1bc0 pppox@8e8de000+58a       ppp_generic@8e9f8000+5c82        nf_conntrack_ipv6@8f094000+15c0 mt76x2e@8f0ec000+2910    mt76x2_common@8f0f0000+2d88      mt76x02_lib@8f150000+a421       mt7603e@8ef30000+96cc    mt76@8e978000+7f5d       mac80211@8e900000+77c89 iptable_nat@8eff6000+3b0                 ipt_REJECT@8f023000+410  ipt_MASQUERADE@8e80b000+2f0     cfg80211@8ef40000+3f4f9          xt_time@8f0ba000+730     xt_tcpudp@8f0b7000+750  xt_state@8f0b4000+310   xt_nat@8f0b0000+650       xt_multiport@8f0a7000+550       xt_mark@8f0a4000+2f0    xt_mac@8f0a0000+2b0      xt_limit@8f09e000+4f0    xt_conntrack@8f07e000+910       xt_comment@8f067000+230          xt_TCPMSS@8e8d7000+b30   xt_REDIRECT@8f09c000+310        xt_LOG@8e8fb000+350              xt_FLOWOFFLOAD@8e8f8000+c30      xt_CT@8e8f5000+ab0      slhc@8f090000+14bb               nf_reject_ipv4@8ef96000+903      nf_nat_redirect@8ef9a000+63b    nf_nat_masquerade_ipv4@8ef9d000+71c       nf_conntrack_ipv4@8f064000+1450 nf_nat_ipv4@8e8b0000+1031                nf_nat@8f080000+3a7c     nf_log_ipv4@8efd5000+df0        nf_flow_table_hw@8e8e5000+920    nf_flow_table@8efb8000+367f      nf_defrag_ipv6@8efb2000+147e    nf_defrag_ipv4@8e8e8000+4b6       nf_conntrack_rtcache@8e8ea000+b10       nf_conntrack@8ef80000+11bca              iptable_mangle@8e8d8000+470      iptable_filter@8f7ed000+3d0     ip_tables@8e8d4000+2bdd  crc_ccitt@8e80e000+42b   compat@8e8d0000+1de4    ledtrig_usbport@8f7e4000+b00             nf_log_ipv6@8e8c6000+10d0        nf_log_common@8f001000+baf      ip6table_mangle@8f76b000+570      ip6table_filter@8f75e000+3d0    ip6_tables@8e8c0000+2ae1        ip6t_REJECT@8efc7000+450  x_tables@8efdc000+38af  nf_reject_ipv6@8eff7000+ac8     leds_gpio@8f794000+bb0   xhci_plat_hcd@8f790000+1650      xhci_pci@8f72e000+c30   xhci_mtk@8f7f2000+1490           xhci_hcd@8f7a0000+16e09  gpio_button_hotplug@8f78e000+1ad0       usbcore@8f7c0000+21591   nls_base@8f734000+1570   usb_common@8ffe1000+a37
<6>[    2.021026] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
<6>[    2.027787] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
<6>[    2.034511] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
<6>[    2.041702] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
<6>[    2.048423] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
<6>[    2.055183] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
<6>[    2.061894] pci 0000:00:00.0: PCI bridge to [bus 01]
<6>[    2.066846] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
<6>[    2.073574] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
<6>[    2.080852] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
<6>[    2.087987] pci 0000:00:01.0: PCI bridge to [bus 02]
<6>[    2.092933] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
<6>[    2.099653] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff pref]
<6>[    2.108218] clocksource: Switched to clocksource GIC
<6>[    2.114767] NET: Registered protocol family 2
<6>[    2.119945] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    2.126839] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
<6>[    2.133270] TCP: Hash tables configured (established 2048 bind 2048)
<6>[    2.139690] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    2.145452] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    2.151946] NET: Registered protocol family 1
<7>[    2.156268] PCI: CLS 0 bytes, default 32
<6>[    2.388167] 4 CPUs re-calibrate udelay(lpj = 2924544)
<4>[    2.394747] Crashlog allocated RAM at address 0x3f00000
<6>[    2.400168] workingset: timestamp_bits=14 max_order=16 bucket_order=2
<6>[    2.414833] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    2.420603] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<5>[    2.431036] random: fast init done
<6>[    2.434139] io scheduler noop registered
<6>[    2.438310] io scheduler deadline registered (default)
<6>[    2.444494] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
<6>[    2.454582] console [ttyS0] disabled
<6>[    2.458130] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
<6>[    2.467147] console [ttyS0] enabled
<6>[    2.474027] bootconsole [early0] disabled
<4>[    2.484276] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
<6>[    2.491904] spi-mt7621 1e000b00.spi: sys_freq: 220000000
<6>[    2.498139] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
<5>[    2.503281] 4 fixed-partitions partitions found on MTD device spi0.0
<5>[    2.509651] Creating 4 MTD partitions on "spi0.0":
<5>[    2.514435] 0x000000000000-0x000000030000 : "u-boot"
<5>[    2.520678] 0x000000030000-0x000000040000 : "u-boot-env"
<5>[    2.527090] 0x000000040000-0x000000050000 : "factory"
<5>[    2.533241] 0x000000050000-0x000001000000 : "firmware"
<5>[    2.539665] 2 uimage-fw partitions found on MTD device firmware
<5>[    2.545569] Creating 2 MTD partitions on "firmware":
<5>[    2.550579] 0x000000000000-0x0000001ffad5 : "kernel"
<5>[    2.556604] 0x0000001ffad5-0x000000fb0000 : "rootfs"
<5>[    2.562721] mtd: device 5 (rootfs) set to be root filesystem
<5>[    2.568570] 1 squashfs-split partitions found on MTD device rootfs
<5>[    2.574736] 0x000000430000-0x000000fb0000 : "rootfs_data"
<6>[    2.582044] libphy: Fixed MDIO Bus: probed
<6>[    2.650253] libphy: mdio: probed
<6>[    4.054512] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
<6>[    4.061238] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 22
<6>[    4.072283] NET: Registered protocol family 10
<6>[    4.078487] Segment Routing with IPv6
<6>[    4.082230] NET: Registered protocol family 17
<6>[    4.086730] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
<6>[    4.099677] 8021q: 802.1Q VLAN Support v1.8
<6>[    4.106481] hctosys: unable to open rtc device (rtc0)
<6>[    4.119110] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
<6>[    4.130502] Freeing unused kernel memory: 1260K
<4>[    4.135030] This architecture does not have kernel memory protection.
<14>[    4.872669] init: Console is alive
<14>[    4.876317] init: - watchdog -
<14>[    5.882569] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<6>[    6.029362] usbcore: registered new interface driver usbfs
<6>[    6.034945] usbcore: registered new interface driver hub
<6>[    6.040467] usbcore: registered new device driver usb
<4>[    6.054247] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
<4>[    6.062995] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
<6>[    6.071955] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
<6>[    6.077277] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
<6>[    6.088345] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
<6>[    6.097519] xhci-mtk 1e1c0000.xhci: irq 21, io mem 0x1e1c0000
<6>[    6.104357] hub 1-0:1.0: USB hub found
<6>[    6.108234] hub 1-0:1.0: 2 ports detected
<6>[    6.112875] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
<6>[    6.118241] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
<6>[    6.125705] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0  SuperSpeed
<6>[    6.132341] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[    6.141347] hub 2-0:1.0: USB hub found
<6>[    6.145168] hub 2-0:1.0: 1 port detected
<14>[    6.154150] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[    6.178545] init: - preinit -
<6>[    7.177582] mtk_soc_eth 1e100000.ethernet: PPE started
<5>[    7.252645] random: procd: uninitialized urandom read (4 bytes read)
<5>[   10.531863] jffs2: notice: (482) jffs2_build_xattr_subsystem: complete building xattr subsystem, 7 of xdatum (3 unchecked, 4 orphan) and 43 of xref (4 dead, 0 orphan) found.
<14>[   10.553355] mount_root: switching to jffs2 overlay
<4>[   10.576616] overlayfs: upper fs does not support tmpfile.
<12>[   10.592158] urandom-seed: Seeding with /etc/urandom.seed
<6>[   10.695023] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
<14>[   10.716965] procd: - early -
<14>[   10.719988] procd: - watchdog -
<14>[   11.368370] procd: - watchdog -
<14>[   11.371872] procd: - ubus -
<5>[   11.397531] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[   11.430071] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[   11.436790] random: ubusd: uninitialized urandom read (4 bytes read)
<14>[   11.444092] procd: - init -
<14>[   12.071546] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[   12.083773] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[   12.097818] Loading modules backported from Linux version v5.4-rc8-0-gaf42d3466bdc
<6>[   12.105474] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51
<6>[   12.114103] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[   12.126620] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
<6>[   12.177575] xt_time: kernel timezone is -0000
<4>[   12.240330] bus=0x1, slot = 0x0, irq=0xff
<6>[   12.244587] mt7603e 0000:01:00.0: ASIC revision: 76030010
<14>[   12.248691] urngd: v1.0.1 started.
<5>[   12.400941] random: crng init done
<5>[   12.404350] random: 6 urandom warning(s) missed due to ratelimiting
<6>[   13.279501] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
<6>[   13.285073] mt7603e 0000:01:00.0: Build Time: 20160107100755
<6>[   13.328226] mt7603e 0000:01:00.0: firmware init done
<7>[   13.500398] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<4>[   13.513858] bus=0x2, slot = 0x1, irq=0xff
<6>[   13.518248] mt76x2e 0000:02:00.0: ASIC revision: 76120044
<6>[   14.269373] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
<6>[   14.279042] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
<6>[   14.284520] mt76x2e 0000:02:00.0: Build: 1
<6>[   14.288650] mt76x2e 0000:02:00.0: Build Time: 201507311614____
<6>[   14.308213] mt76x2e 0000:02:00.0: Firmware running!
<7>[   14.315892] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
<6>[   14.323384] PPP generic driver version 2.4.2
<6>[   14.329343] NET: Registered protocol family 24
<14>[   14.337138] kmodloader: done loading kernel modules from /etc/modules.d/*
<6>[   18.442839] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
<6>[   20.695431] mtk_soc_eth 1e100000.ethernet: PPE started
<6>[   20.705271] br-lan: port 1(eth0.1) entered blocking state
<6>[   20.710862] br-lan: port 1(eth0.1) entered disabled state
<6>[   20.716991] device eth0.1 entered promiscuous mode
<6>[   20.721938] device eth0 entered promiscuous mode
<6>[   20.731335] br-lan: port 1(eth0.1) entered blocking state
<6>[   20.736800] br-lan: port 1(eth0.1) entered forwarding state
<6>[   20.743072] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
<6>[   21.504643] pppoe-wan: renamed from ppp0
<6>[   21.759034] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
<6>[   25.485868] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
<6>[   25.499062] br-lan: port 2(wlan1) entered blocking state
<6>[   25.504430] br-lan: port 2(wlan1) entered disabled state
<6>[   25.510505] device wlan1 entered promiscuous mode
<6>[   25.555437] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[   25.566445] br-lan: port 3(wlan0) entered blocking state
<6>[   25.571826] br-lan: port 3(wlan0) entered disabled state
<6>[   25.577853] device wlan0 entered promiscuous mode
<6>[   25.583186] br-lan: port 3(wlan0) entered blocking state
<6>[   25.588566] br-lan: port 3(wlan0) entered forwarding state
<6>[   26.063776] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[   26.077173] br-lan: port 4(wlan0-1) entered blocking state
<6>[   26.083073] br-lan: port 4(wlan0-1) entered disabled state
<6>[   26.089464] device wlan0-1 entered promiscuous mode
<6>[   26.099208] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
<6>[   26.105510] br-lan: port 4(wlan0-1) entered blocking state
<6>[   26.111095] br-lan: port 4(wlan0-1) entered forwarding state
<6>[   26.662628] br-lan: port 4(wlan0-1) entered disabled state
<6>[   26.669241] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
<6>[   26.676001] br-lan: port 2(wlan1) entered blocking state
<6>[   26.681401] br-lan: port 2(wlan1) entered forwarding state
<6>[   26.695246] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
<6>[   26.703001] br-lan: port 4(wlan0-1) entered blocking state
<6>[   26.708650] br-lan: port 4(wlan0-1) entered forwarding state
<6>[   26.723751] br-lan: port 5(wlan0-2) entered blocking state
<6>[   26.729417] br-lan: port 5(wlan0-2) entered disabled state
<6>[   26.735733] device wlan0-2 entered promiscuous mode
<6>[   26.742641] IPv6: ADDRCONF(NETDEV_UP): wlan0-2: link is not ready
<6>[   26.748867] br-lan: port 5(wlan0-2) entered blocking state
<6>[   26.754465] br-lan: port 5(wlan0-2) entered forwarding state
<6>[   27.177925] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-2: link becomes ready
<1>[159983.016519] CPU 1 Unable to handle kernel paging request at virtual address 07406000, epc == 801317c0, ra == 80131674
<4>[159983.027206] Oops[#1]:
<4>[159983.029559] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.155 #0
<4>[159983.035718] task: 8fc3c100 task.stack: 8fc5c000
<4>[159983.040314] $ 0   : 00000000 00000001 00000000 81266650
<4>[159983.045615] $ 4   : 806061fc 00000001 00000001 07406000
<4>[159983.050915] $ 8   : 000289b4 000289b3 00000000 00000001
<4>[159983.056211] $12   : 00000002 00000000 c0222b40 00009180
<4>[159983.061507] $16   : 8fc02a00 01090220 807a0000 8ea80000
<4>[159983.066803] $20   : 00000018 00000800 00000000 01080020
<4>[159983.072101] $24   : 3b9aca00 80008e2c
<4>[159983.077399] $28   : 8fc5c000 8fc0b9c8 00000000 80131674
<4>[159983.082697] Hi    : 00002665
<4>[159983.085647] Lo    : 94af5487
<4>[159983.088611] epc   : 801317c0 __kmalloc_track_caller+0x20c/0x290
<4>[159983.094591] ra    : 80131674 __kmalloc_track_caller+0xc0/0x290
<4>[159983.100478] Status: 11007c03     KERNEL EXL IE
<4>[159983.104737] Cause : 40800008 (ExcCode 02)
<4>[159983.108810] BadVA : 07406000
<4>[159983.111762] PrId  : 0001992f (MIPS 1004Kc)
<4>[159983.115920] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
<4>[159983.186680] Process swapper/1 (pid: 0, threadinfo=8fc5c000, task=8fc3c100, tls=00000000)
<4>[159983.194820] Stack : 80666658 8eec1e00 00000000 00000000 0000006c 8ee726c0 00000000 01080020
<4>[159983.203242]         8038772c 80383e60 00000000 00000000 284162c7 b901a8c0 fb0000e0 8ee726c0
<4>[159983.211663]         8ee726c0 00000000 00000740 00000018 8ef3cc00 8038772c 00000000 80600000
<4>[159983.220082]         00000004 00000000 00000000 8ef3cc00 8ee726c0 8ef77ab2 8ee726c0 00000018
<4>[159983.228504]         8ef3cc00 00000000 00000000 8e932214 000000e1 806061fc 8fc0bb44 8fc0bb4c
<4>[159983.236932]         ...
<4>[159983.239455] Call Trace:
<4>[159983.241987] [<801317c0>] __kmalloc_track_caller+0x20c/0x290
<4>[159983.247645] [<80383e60>] __kmalloc_reserve.isra.45+0x44/0xac
<4>[159983.253388] [<8038772c>] pskb_expand_head+0x8c/0x328
<4>[159983.258565] [<8e932214>] ieee80211_skb_resize+0x19c/0xde0 [mac80211]
<4>[159983.265045] [<8e932b44>] ieee80211_skb_resize+0xacc/0xde0 [mac80211]
<4>[159983.271514] [<8f080e1c>] nf_xfrm_me_harder+0x830/0xa90 [nf_nat]
<4>[159983.277497] Code: 00000000  8e020014  00e23821 <8ce20000> 10000012  cc400000  10400005  00000000  8e060010
<4>[159983.287311]
<4>[159983.289013] ---[ end trace de892621f972e570 ]---

===================================
Time: 1574977671.67638
root@OpenWrt:~#
 
08.01.20202718Base systemBug ReportVery LowCritical/overlay is empty and nothing can be written thereTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

Only on TPLink Archer C7 v5 (current model).
Other models are OK: A7 (”V5”) (also current), C7 V2, C7 V4 (both earlier)

- Software versions of OpenWrt/LEDE release, packages, etc.

Only Trunk has this problem, and only on C7 v5. rc19.07 does *not* have this problem.

- Steps to reproduce

make menuconfig for target C7 V5
load squashfs-factory version in a C7 V5
boot

...and presto, there’s nothing in /overlay. /rom/overlay is populated. I have found no way to write anything on /overlay. Luci can’t save anything either – not even a password.

There’s nothing weird in my make menuconfig config, unless you count python3-light, bind-dig, ca-certificates, etc. as weird. And the other C7 and C7-like models work fine.

 


05.02.20202812Base systemBug ReportVery LowCriticalXiaomi router 3g Openwrt V19 problem. Upload very low. openwrt-19.07Unconfirmed Task Description

Hello, I have xiaomi router 3g, I installed OpenWrt v18 and everything perfect, perfect speed, perfect management (although improvable) etc ...
The problem comes when upgrading to v19.07 and v19.07.1, the router’s upload speed low by half (wired 600mbs v18) v19 300mbs upload speed .... it looks like a bug and it happens to many people , is there any solution to this? Is it possible to improve the router driver and improve the upload and full management of v19? thanks.

13.02.20202832Base systemBug ReportVery LowCriticalD-link DIR-885L firmware doesn't match due to regional ...openwrt-19.07Unconfirmed Task Description

According to the hardware support list, D-link DIR-885L HW A1 is supported, therefore, I have acquired one in China, it clearly stated the HW revision is A1 but its WIFI is not supported with the original firmware 19.07.1

after I flashed the firmware in discovery mode , the wireless tab is not shown in the system. Checked wifi configuration and the file was empty. I found there’s another driver for A2 hardware in the product page, I downloaded it, put it in the designated directory, restarted the router and my wifi appears.

but the driver doesn’t work well. The 2.4g (radio0) can not be started most of the time, some time I alter the configuration of radio0 might bring it up, but even I’ve managed to find the SSID, I can’t connect it. always prompt wrong password.

the 5g (radio1) is better. if I fix the channel, restart the router every time I change the configuration (even change password), it usually make the router works.

I think the Device sold in China is different from other area, the default firmware (which supports A1) doesn’t support Chinese A1 hardware, the A2 firmware driver (BCM4366c) supports the Chinese A1 hardware but doesn’t work well since the driver was dated 2017.

with this BCM4366C driver provided in A2 firmware, I can only have 5G fix Channel WPA2 security wifi service, it’s usable, but all other function are not working, not even one.

I opened the router, tried to provide the chip information but the chips are covered by metal jacket and fixed to the mother board. I have manufacture’s original latest firmware, I think the proper driver may be extracted from it but I’m not capable to do it. I can provide the file as requested. Can’t post here, the file is too big.


26.02.20202863KernelBug ReportVery LowCriticalNo wireless - ath9k: probe of ar934x_wmac failed with e...TrunkUnconfirmed Task Description

TP-Link TL-WDR4300 v1
Atheros AR9344 rev 2
OpenWrt SNAPSHOT r12324-35890514bb

After firmware update the wireless interface stop working and system log display this errors:

[  775.566457] ath: phy2: Unable to initialize hardware; initialization status: -5
[  775.573947] ath9k ar934x_wmac: failed to initialize device
[  775.579593] ath9k: probe of ar934x_wmac failed with error -5
[  775.585511] pci 0000:00:00.0: using irq 40 for pin 1
[  775.594310] ath: phy3: Unable to initialize hardware; initialization status: -5
[  775.601780] ath9k 0000:00:00.0: Failed to initialize device
[  775.607518] ath9k: probe of 0000:00:00.0 failed with error -5

After removing the modules with:

rmmod ath9k
rmmod ath9k_common
rmmod ath9k_hw

And trying to load them back with:

insmod ath9k_common
insmod ath9k_hw
insmod ath9k

This messages show up:

[  837.091531] ath9k: ath9k: Driver unloaded
[  843.290249] ath9k: Unknown symbol ath9k_hw_stop_dma_queue (err 0)
[  843.296516] ath9k: Unknown symbol ath9k_hw_set_txpowerlimit (err 0)
[  843.303090] ath9k: Unknown symbol ath9k_hw_reset_calvalid (err 0)
[  843.309396] ath9k: Unknown symbol ath9k_hw_intrpend (err 0)
[  843.315144] ath9k: Unknown symbol ath9k_cmn_debug_modal_eeprom (err 0)
[  843.321888] ath9k: Unknown symbol ath9k_hw_enable_interrupts (err 0)
[  843.328450] ath9k: Unknown symbol ar9003_hw_bb_watchdog_check (err 0)
[  843.335112] ath9k: Unknown symbol ath9k_cmn_rx_accept (err 0)
[  843.341067] ath9k: Unknown symbol ath9k_hw_reset (err 0)
[  843.346548] ath9k: Unknown symbol ath9k_hw_abort_tx_dma (err 0)
[  843.352673] ath9k: Unknown symbol ath9k_hw_setuptxqueue (err 0)
[  843.358798] ath9k: Unknown symbol ath9k_hw_setuprxdesc (err 0)
[  843.364792] ath9k: Unknown symbol ath9k_hw_startpcureceive (err 0)
[  843.371183] ath9k: Unknown symbol ar9003_paprd_init_table (err 0)
[  843.377475] ath9k: Unknown symbol ath9k_hw_gpio_request_out (err 0)
[  843.383905] ath9k: Unknown symbol ath9k_hw_putrxbuf (err 0)
[  843.389669] ath9k: Unknown symbol ath9k_hw_check_nav (err 0)
[  843.395508] ath9k: Unknown symbol ath9k_hw_setmcastfilter (err 0)
[  843.401901] ath9k: Unknown symbol ath9k_hw_setpower (err 0)
[  843.407683] ath9k: Unknown symbol ath9k_hw_phy_disable (err 0)
[  843.413677] ath9k: Unknown symbol ath9k_cmn_rx_skb_postprocess (err 0)
[  843.420411] ath9k: Unknown symbol ath_dynack_sample_ack_ts (err 0)
[  843.426782] ath9k: Unknown symbol ath9k_cmn_beacon_config_sta (err 0)
[  843.433408] ath9k: Unknown symbol ath9k_hw_check_alive (err 0)
[  843.439430] ath9k: Unknown symbol ath9k_hw_setrxabort (err 0)
[  843.445338] ath9k: Unknown symbol ath9k_hw_txstart (err 0)
[  843.451017] ath9k: Unknown symbol ath9k_hw_gpio_free (err 0)
[  843.456886] ath9k: Unknown symbol ar9003_get_pll_sqsum_dvc (err 0)
[  843.463255] ath9k: Unknown symbol ar9003_is_paprd_enabled (err 0)
[  843.469560] ath9k: Unknown symbol ath9k_hw_set_rx_bufsize (err 0)
[  843.475828] ath9k: Unknown symbol ath9k_hw_updatetxtriglevel (err 0)
[  843.482398] ath9k: Unknown symbol ath9k_hw_beaconinit (err 0)
[  843.488395] ath9k: Unknown symbol ath9k_hw_set_tx_filter (err 0)
[  843.494565] ath9k: Unknown symbol ath9k_hw_settsf64 (err 0)
[  843.500337] ath9k: Unknown symbol ath9k_hw_init_global_settings (err 0)
[  843.507156] ath9k: Unknown symbol ath9k_hw_abortpcurecv (err 0)
[  843.513239] ath9k: Unknown symbol ath9k_hw_update_diag (err 0)
[  843.519285] ath9k: Unknown symbol ath9k_hw_name (err 0)
[  843.524665] ath9k: Unknown symbol ath9k_hw_beaconq_setup (err 0)
[  843.530862] ath9k: Unknown symbol ath9k_cmn_debug_phy_err (err 0)
[  843.537187] ath9k: Unknown symbol ath9k_hw_puttxbuf (err 0)
[  843.542959] ath9k: Unknown symbol ath9k_hw_write_associd (err 0)
[  843.549176] ath9k: Unknown symbol ath_dynack_sample_tx_ts (err 0)
[  843.555487] ath9k: Unknown symbol ath_dynack_reset (err 0)
[  843.561162] ath9k: Unknown symbol ath9k_cmn_debug_recv (err 0)
[  843.567198] ath9k: Unknown symbol ath9k_hw_setup_statusring (err 0)
[  843.573689] ath9k: Unknown symbol ath9k_hw_addrxbuf_edma (err 0)
[  843.579902] ath9k: Unknown symbol ath9k_cmn_debug_base_eeprom (err 0)
[  843.586513] ath9k: Unknown symbol ath9k_cmn_process_rssi (err 0)
[  843.592717] ath9k: Unknown symbol ath9k_cmn_beacon_config_adhoc (err 0)
[  843.599543] ath9k: Unknown symbol ath9k_hw_ani_monitor (err 0)
[  843.605533] ath9k: Unknown symbol ath9k_hw_getrxfilter (err 0)
[  843.611577] ath9k: Unknown symbol ath9k_cmn_debug_stat_rx (err 0)
[  843.617868] ath9k: Unknown symbol ath_dynack_node_init (err 0)
[  843.623865] ath9k: Unknown symbol ath9k_cmn_beacon_config_ap (err 0)
[  843.630416] ath9k: Unknown symbol ath9k_hw_set_tsfadjust (err 0)
[  843.636591] ath9k: Unknown symbol ar9003_hw_bb_watchdog_dbg_info (err 0)
[  843.643492] ath9k: Unknown symbol ar9003_paprd_create_curve (err 0)
[  843.649957] ath9k: Unknown symbol ath9k_hw_gpio_request_in (err 0)
[  843.656303] ath9k: Unknown symbol ath9k_hw_set_sta_beacon_timers (err 0)
[  843.663272] ath9k: Unknown symbol ath9k_hw_gettsf64 (err 0)
[  843.669035] ath9k: Unknown symbol ath9k_hw_rxprocdesc (err 0)
[  843.674939] ath9k: Unknown symbol ath_gen_timer_isr (err 0)
[  843.680700] ath9k: Unknown symbol ath9k_hw_resettxqueue (err 0)
[  843.686831] ath9k: Unknown symbol ath9k_hw_setopmode (err 0)
[  843.692654] ath9k: Unknown symbol ar9003_paprd_populate_single_table (err 0)
[  843.699911] ath9k: Unknown symbol ath9k_hw_process_rxdesc_edma (err 0)
[  843.706654] ath9k: Unknown symbol ath_dynack_node_deinit (err 0)
[  843.712881] ath9k: Unknown symbol ath9k_cmn_init_channels_rates (err 0)
[  843.719713] ath9k: Unknown symbol ath9k_hw_kill_interrupts (err 0)
[  843.726071] ath9k: Unknown symbol ath9k_cmn_reload_chainmask (err 0)
[  843.732658] ath9k: Unknown symbol ath9k_hw_reset_tsf (err 0)
[  843.738508] ath9k: Unknown symbol ath9k_hw_get_txq_props (err 0)
[  843.744679] ath9k: Unknown symbol ath9k_hw_releasetxqueue (err 0)
[  843.750966] ath9k: Unknown symbol ath9k_hw_setrxfilter (err 0)
[  843.757063] ath9k: Unknown symbol ath9k_hw_loadnf (err 0)
[  843.762627] ath9k: Unknown symbol ath9k_hw_gettxbuf (err 0)
[  843.768411] ath9k: Unknown symbol ath9k_hw_gpio_get (err 0)
[  843.774176] ath9k: Unknown symbol ath9k_hw_bstuck_nfcal (err 0)
[  843.780320] ath9k: Unknown symbol ath9k_hw_disable_interrupts (err 0)
[  843.786961] ath9k: Unknown symbol ath9k_cmn_update_txpow (err 0)
[  843.793132] ath9k: Unknown symbol ath9k_hw_computetxtime (err 0)
[  843.799339] ath9k: Unknown symbol ath9k_hw_getchan_noise (err 0)
[  843.805506] ath9k: Unknown symbol ar9003_paprd_enable (err 0)
[  843.811483] ath9k: Unknown symbol ath9k_hw_stopdmarecv (err 0)
[  843.817515] ath9k: Unknown symbol ath9k_cmn_get_hw_crypto_keytype (err 0)
[  843.824477] ath9k: Unknown symbol ath9k_hw_set_interrupts (err 0)
[  843.830764] ath9k: Unknown symbol ath9k_hw_wait (err 0)
[  843.836148] ath9k: Unknown symbol ar9003_paprd_setup_gain_table (err 0)
[  843.842963] ath9k: Unknown symbol ath9k_hw_numtxpending (err 0)
[  843.849079] ath9k: Unknown symbol ath9k_hw_get_tsf_offset (err 0)
[  843.855363] ath9k: Unknown symbol ath9k_cmn_process_rate (err 0)
[  843.861582] ath9k: Unknown symbol ath9k_cmn_init_crypto (err 0)
[  843.867699] ath9k: Unknown symbol ath9k_hw_set_gpio (err 0)
[  843.873444] ath9k: Unknown symbol ath9k_hw_setantenna (err 0)
[  843.879472] ath9k: Unknown symbol ath9k_hw_resume_interrupts (err 0)
[  843.885998] ath9k: Unknown symbol ath9k_hw_deinit (err 0)
[  843.891585] ath9k: Unknown symbol ath9k_cmn_get_channel (err 0)
[  843.897714] ath9k: Unknown symbol ath9k_hw_init (err 0)
[  843.903104] ath9k: Unknown symbol ath9k_hw_set_txq_props (err 0)
[  843.909307] ath9k: Unknown symbol ar9003_paprd_is_done (err 0)
[  864.457183] ath: phy4: Unable to initialize hardware; initialization status: -5
[  864.464617] ath9k ar934x_wmac: failed to initialize device
[  864.470266] ath9k: probe of ar934x_wmac failed with error -5
[  864.476180] pci 0000:00:00.0: using irq 40 for pin 1
[  864.484980] ath: phy5: Unable to initialize hardware; initialization status: -5
[  864.492449] ath9k 0000:00:00.0: Failed to initialize device
[  864.498181] ath9k: probe of 0000:00:00.0 failed with error -5
28.02.20202868PackagesBug ReportVery LowCriticalCLAT/464XLAT stopped working in 19.07.1openwrt-19.07Unconfirmed Task Description

I was using CLAT in an Archer C7 v5 for some testing. Everything worked fine.

I decided then to upgrade to 19.07.1 and everything works fine from the backup that I did from the config, but not the CLAT (464XLAT).

I decided to reflash the unit from scratch and configure everything manually. Same problem, CLAT is not working. I tried even setting the tunnel link to the WAN interface manually in the CLAT interface (advanced settings), instead of the default “unspecified”, played with the firewall settings as well, etc. Nothing resulted.

By the way, even in 18.06.7, which I’m using right now with the CLAT, the CLAT interface doesn’t report any RX/TX or packets. In the same router I’ve installed Collectd and I can see there the traffic being graphed correctly.

So I’m guessing there is some bug there. I’m going to report it as a bug, but just in case someone discovered an easy solution.

I’ve observed that at some point, across numerous tests, a Virtual dynamic interface 464XLAT was created, but it doesn’t allow to edit it, so not sure if this is related. I believe this interface is only created when I’m using PPPoE for the WAN link (I’ve tested 2 scenarios, PPPoE done in the OpenWRT box and PPPoE done in the GPON ONT).

08.04.20202979Base systemBug ReportVery LowCriticalBanana Pi R64 can not upgrade on sysupgrade imageTrunkUnconfirmed Task Description

When I am try update initramfs image to sysupgrade. After command sysupgrade I am get error: Sysupgrade is not supported on your board yet.
Device: Banana PI R64
Build: Development Snapshot from Wed Apr 8 02:31:30 2020


08.04.20202981Base systemBug ReportVery LowCriticalno switch0 device on Xiaomi Mi Router 3G (and V2)TrunkUnconfirmed Task Description

Apparently since kernel 5.4, the switch0 is not working correctly anymore. With a plain network config, ethernet ports are available. When using VLAN, the ports don’t work anymore; even the LEDs are off.
Luci → Network: no switch option available

root@test:/# swconfig list
root@test:/#


Devices: Xioami Mi Router 3G and Xiaomi Mi Router 3G V2
Tested with both devices. Tested with plain git checkout and my own build environment (master). Always the same behaviour...

boot log:

<## Booting image at bc180000 ...
   Image Name:   MIPS dl3it-mi3g Linux-5.4.28
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    2102189 Bytes =  2 MB
   Load Address: 80001000
   Entry Point:  80001000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Erasing SPI Flash...
raspi_erase: offs:30000 len:10000
.
Writing to SPI Flash...
.
done
commandline uart_en=0 factory_mode=0 mem=128m root=/dev/mtdblock9
No initrd
## Transferring control to Linux (at address 80001000) ...
## Giving linux memsize in MB, 128

Starting kernel ...

[    0.000000] Linux version 5.4.28 (dl3it-mi3g@mySpace) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r12868-c948a4782b)) #0 SMP Wed Apr 8 13:05:51 2020
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Xiaomi Mi Router 3G v2
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] percpu: Embedded 14 pages/cpu s26480 r8192 d22672 u57344
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Writing ErrCtl register=000400d0
[    0.000000] Readback ErrCtl register=000400d0
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 122004K/131072K available (5291K kernel code, 173K rwdata, 688K rodata, 1260K init, 224K bss, 9068K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 256
[    0.000000] random: get_random_bytes called from 0x80605a08 with crng_init=0
[    0.000000] CPU Clock: 880MHz
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.007802] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
[    0.042004] pid_max: default: 32768 minimum: 301
[    0.046743] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.053968] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.063838] rcu: Hierarchical SRCU implementation.
[    0.069180] smp: Bringing up secondary CPUs ...
[    0.075309] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.075319] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.075331] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.075432] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.101936] Synchronize counters for CPU 1: done.
[    0.142926] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.142934] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.142942] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.143000] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.166600] Synchronize counters for CPU 2: done.
[    0.197977] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.197985] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.197994] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.198055] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.224458] Synchronize counters for CPU 3: done.
[    0.254333] smp: Brought up 1 node, 4 CPUs
[    0.262078] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.271788] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.278766] pinctrl core: initialized pinctrl subsystem
[    0.285406] NET: Registered protocol family 16
[    0.310358] random: fast init done
[    0.318567] clocksource: Switched to clocksource GIC
[    0.325345] NET: Registered protocol family 2
[    0.330315] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.338626] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.346200] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.353202] TCP: Hash tables configured (established 1024 bind 1024)
[    0.359629] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.366103] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.373226] NET: Registered protocol family 1
[    0.377532] PCI: CLS 0 bytes, default 32
[    0.470541] 4 CPUs re-calibrate udelay(lpj = 1163264)
[    0.477001] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.492348] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.498111] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.510897] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.516745] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.522559] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.528863] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    0.536441] printk: console [ttyS0] disabled
[    0.540734] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[    0.549720] printk: console [ttyS0] enabled
[    0.549720] printk: console [ttyS0] enabled
[    0.557980] printk: bootconsole [early0] disabled
[    0.557980] printk: bootconsole [early0] disabled
[    0.569760] spi-mt7621 1e000b00.spi: sys_freq: 220000000
[    0.577944] spi-nor spi0.0: gd25q128 (16384 Kbytes)
[    0.582936] 8 fixed-partitions partitions found on MTD device spi0.0
[    0.589281] Creating 8 MTD partitions on "spi0.0":
[    0.594079] 0x000000000000-0x000000030000 : "u-boot"
[    0.600206] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.606677] 0x000000040000-0x000000050000 : "Bdata"
[    0.612654] 0x000000050000-0x000000060000 : "factory"
[    0.618871] 0x000000060000-0x000000070000 : "crash"
[    0.624841] 0x000000070000-0x000000080000 : "cfg_bak"
[    0.631048] 0x000000080000-0x000000180000 : "overlay"
[    0.637248] 0x000000180000-0x000001000000 : "firmware"
[    0.643805] 2 uimage-fw partitions found on MTD device firmware
[    0.649771] Creating 2 MTD partitions on "firmware":
[    0.654751] 0x000000000000-0x0000002013ed : "kernel"
[    0.660846] 0x0000002013ed-0x000000e80000 : "rootfs"
[    0.666945] mtd: device 9 (rootfs) set to be root filesystem
[    0.672703] 1 squashfs-split partitions found on MTD device rootfs
[    0.678890] 0x0000009c0000-0x000000e80000 : "rootfs_data"
[    0.686092] libphy: Fixed MDIO Bus: probed
[    0.716870] libphy: mdio: probed
[    0.720379] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    0.727570] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[    0.738011] mt7621-pci 1e140000.pcie: Parsing DT failed
[    0.745444] NET: Registered protocol family 10
[    0.751473] Segment Routing with IPv6
[    0.755297] NET: Registered protocol family 17
[    0.760014] 8021q: 802.1Q VLAN Support v1.8
[    0.765966] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    1.374877] libphy: dsa slave smi: probed
[    1.438599] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
[    1.458608] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
[    1.478606] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
[    1.534553] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
[    2.150548] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
[    2.226584] DSA: tree 0 setup
[    2.229877] rt2880-pinmux pinctrl: pcie is already enabled
[    2.235383] mt7621-pci 1e140000.pcie: Error applying setting, reverse things back
[    2.243000] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
[    2.250551] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
[    2.357677] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
[    2.363264] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
[    2.468514] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
[    2.475474] mt7621-pci 1e140000.pcie: PCIE0 enabled
[    2.480348] mt7621-pci 1e140000.pcie: PCIE1 enabled
[    2.485228] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    2.494703] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[    2.501072] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
[    2.507943] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    2.514813] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.520334] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    2.526365] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.532635] pci 0000:00:00.0: reg 0x14: [mem 0x60400000-0x6040ffff]
[    2.538968] pci 0000:00:00.0: supports D1
[    2.542981] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.549116] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    2.555169] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.561435] pci 0000:00:01.0: reg 0x14: [mem 0x60410000-0x6041ffff]
[    2.567758] pci 0000:00:01.0: supports D1
[    2.571771] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    2.579056] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[    2.585128] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    2.591952] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.598749] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    2.606100] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    2.611344] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    2.617432] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    2.624216] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    2.631434] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.638265] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
[    2.644325] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    2.650726] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    2.658077] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[    2.663322] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
[    2.669410] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    2.676194] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[    2.683420] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    2.690083] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    2.696693] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.703651] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    2.710254] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.717213] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    2.723998] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[    2.731215] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[    2.737997] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[    2.745215] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
[    2.752006] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
[    2.758795] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
[    2.765577] pci 0000:00:01.0: BAR 7: assigned [io  0x1e161000-0x1e161fff]
[    2.772372] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[    2.779687] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[    2.786903] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.791867] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
[    2.798649] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    2.805429] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    2.812657] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
[    2.819442] pci 0000:00:01.0: PCI bridge to [bus 02]
[    2.824405] pci 0000:00:01.0:   bridge window [io  0x1e161000-0x1e161fff]
[    2.831188] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    2.837966] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[    2.845884] hctosys: unable to open rtc device (rtc0)
[    2.854774] VFS: Mounted root (squashfs filesystem) readonly on device 31:9.
[    2.865727] Freeing unused kernel memory: 1260K
[    2.870309] This architecture does not have kernel memory protection.
[    2.876743] Run /sbin/init as init process
[    3.287646] init: Console is alive
[    3.291282] init: - watchdog -
[    4.502146] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.642663] usbcore: registered new interface driver usbfs
[    4.648277] usbcore: registered new interface driver hub
[    4.653761] usbcore: registered new device driver usb
[    4.687605] SCSI subsystem initialized
[    4.700291] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
[    4.709018] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
[    4.717973] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    4.723320] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[    4.738712] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
[    4.747932] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[    4.754929] hub 1-0:1.0: USB hub found
[    4.758772] hub 1-0:1.0: 2 ports detected
[    4.763366] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    4.768728] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[    4.776220] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[    4.782759] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.791649] hub 2-0:1.0: USB hub found
[    4.795501] hub 2-0:1.0: 1 port detected
[    4.806463] usbcore: registered new interface driver usb-storage
[    4.812799] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.830880] init: - preinit -
[    5.556493] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[    5.564803] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    5.573306] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.758344] random: jshn: uninitialized urandom read (4 bytes read)
[    5.857508] random: jshn: uninitialized urandom read (4 bytes read)
[    5.892574] random: jshn: uninitialized urandom read (4 bytes read)
[    6.182562] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[    6.214670] 8021q: adding VLAN 0 to HW filter on device lan1
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   10.454588] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control off
[   10.461993] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
[   10.497376] jffs2: notice: (593) jffs2_build_xattr_subsystem: complete building xattr subsystem, 12 of xdatum (10 unchecked, 2 orphan) and 14 of xref (2 dead, 0 orphan) found.
[   10.514983] mount_root: switching to jffs2 overlay
[   10.541029] overlayfs: upper fs does not support tmpfile.
[   10.553353] urandom-seed: Seeding with /etc/urandom.seed
[   10.710556] mt7530 mdio-bus:1f lan1: Link is Down
[   10.794276] procd: - early -
[   10.797283] procd: - watchdog -
[   11.390731] procd: - watchdog -
[   11.394174] procd: - ubus -
[   11.495821] urandom_read: 5 callbacks suppressed
[   11.495833] random: ubusd: uninitialized urandom read (4 bytes read)
[   11.508640] random: ubusd: uninitialized urandom read (4 bytes read)
[   11.516312] procd: - init -
Please press Enter to activate this console.
[   11.847029] random: crng init done
[   12.196458] kmodloader: loading kernel modules from /etc/modules.d/*
[   12.277843] Key type dns_resolver registered
[   12.294374] RPC: Registered named UNIX socket transport module.
[   12.300415] RPC: Registered udp transport module.
[   12.305113] RPC: Registered tcp transport module.
[   12.309806] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.326652] tun: Universal TUN/TAP device driver, 1.6
[   12.343512] urngd: v1.0.2 started.
[   12.353986] NFS: Registering the id_resolver key type
[   12.359125] Key type id_resolver registered
[   12.363309] Key type id_legacy registered
[   12.409615] Loading modules backported from Linux version v5.4.27-0-g585e0cc08069
[   12.417142] Backport generated by backports.git v5.4.27-1-0-gf6e8852f
[   12.436131] wireguard: WireGuard 1.0.20200401 loaded. See www.wireguard.com for information.
[   12.444603] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   12.461355] xt_time: kernel timezone is -0000
[   12.526918] pci 0000:00:01.0: enabling device (0006 -> 0007)
[   12.532626] mt7603e 0000:02:00.0: enabling device (0000 -> 0002)
[   12.538852] mt7603e 0000:02:00.0: ASIC revision: 76030010
[   13.163810] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
[   13.169406] mt7603e 0000:02:00.0: Build Time: 20160107100755
[   13.198554] mt7603e 0000:02:00.0: firmware init done
[   13.396912] pci 0000:00:00.0: enabling device (0006 -> 0007)
[   13.402664] mt76x2e 0000:01:00.0: enabling device (0000 -> 0002)
[   13.408975] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[   13.890858] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
[   13.905566] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[   13.911181] mt76x2e 0000:01:00.0: Build: 1
[   13.915314] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[   13.938667] mt76x2e 0000:01:00.0: Firmware running!
[   13.975037] kmodloader: done loading kernel modules from /etc/modules.d/*
[   19.857666] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[   20.437833] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[   20.448515] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   20.457303] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.470323] br-gast: port 1(eth0.119) entered blocking state
[   20.476130] br-gast: port 1(eth0.119) entered disabled state
[   20.482797] device eth0.119 entered promiscuous mode
[   20.487821] device eth0 entered promiscuous mode
[   20.496672] br-gast: port 1(eth0.119) entered blocking state
[   20.502388] br-gast: port 1(eth0.119) entered forwarding state
[   20.610001] br-iot: port 1(eth0.120) entered blocking state
[   20.615694] br-iot: port 1(eth0.120) entered disabled state
[   20.621937] device eth0.120 entered promiscuous mode
[   20.631403] br-iot: port 1(eth0.120) entered blocking state
[   20.637077] br-iot: port 1(eth0.120) entered forwarding state
[   20.756696] br-lan: port 1(eth0.117) entered blocking state
[   20.762433] br-lan: port 1(eth0.117) entered disabled state
[   20.769851] device eth0.117 entered promiscuous mode
[   20.780577] br-lan: port 1(eth0.117) entered blocking state
[   20.786261] br-lan: port 1(eth0.117) entered forwarding state
[   20.903708] br-media: port 1(eth0.118) entered blocking state
[   20.909789] br-media: port 1(eth0.118) entered disabled state
[   20.916212] device eth0.118 entered promiscuous mode
[   20.924455] br-media: port 1(eth0.118) entered blocking state
[   20.930260] br-media: port 1(eth0.118) entered forwarding state
[   21.021138] br-rapw: port 1(eth0.128) entered blocking state
[   21.027159] br-rapw: port 1(eth0.128) entered disabled state
[   21.033622] device eth0.128 entered promiscuous mode
[   21.042842] br-rapw: port 1(eth0.128) entered blocking state
[   21.048592] br-rapw: port 1(eth0.128) entered forwarding state
[   24.551924] br-lan: port 2(wlan1) entered blocking state
[   24.557320] br-lan: port 2(wlan1) entered disabled state
[   24.563518] device wlan1 entered promiscuous mode
[   24.640154] br-lan: port 3(wlan0) entered blocking state
[   24.645515] br-lan: port 3(wlan0) entered disabled state
[   24.651714] device wlan0 entered promiscuous mode
[   24.657070] br-lan: port 3(wlan0) entered blocking state
[   24.662453] br-lan: port 3(wlan0) entered forwarding state
[   25.927299] br-lan: port 3(wlan0) entered disabled state
[   25.933474] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   25.940330] br-lan: port 2(wlan1) entered blocking state
[   25.945682] br-lan: port 2(wlan1) entered forwarding state
[   25.961147] br-gast: port 2(wlan1-1) entered blocking state
[   25.966815] br-gast: port 2(wlan1-1) entered disabled state
[   25.973281] device wlan1-1 entered promiscuous mode
[   25.980340] br-gast: port 2(wlan1-1) entered blocking state
[   25.986013] br-gast: port 2(wlan1-1) entered forwarding state
[   26.602100] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
[   26.615326] br-iot: port 2(wlan1-2) entered blocking state
[   26.620895] br-iot: port 2(wlan1-2) entered disabled state
[   26.627238] device wlan1-2 entered promiscuous mode
[   26.633956] br-iot: port 2(wlan1-2) entered blocking state
[   26.639547] br-iot: port 2(wlan1-2) entered forwarding state
[   26.654413] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   26.661418] br-lan: port 3(wlan0) entered blocking state
[   26.666839] br-lan: port 3(wlan0) entered forwarding state
[   26.684260] br-gast: port 3(wlan0-1) entered blocking state
[   26.689898] br-gast: port 3(wlan0-1) entered disabled state
[   26.696257] device wlan0-1 entered promiscuous mode
[   26.703570] br-gast: port 3(wlan0-1) entered blocking state
[   26.709197] br-gast: port 3(wlan0-1) entered forwarding state
[   26.950979] br-iot: port 2(wlan1-2) entered disabled state
[   26.958856] br-gast: port 3(wlan0-1) entered disabled state
[   27.183822] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-2: link becomes ready
[   27.190950] br-iot: port 2(wlan1-2) entered blocking state
[   27.196513] br-iot: port 2(wlan1-2) entered forwarding state
[   27.287694] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[   27.294743] br-gast: port 3(wlan0-1) entered blocking state
[   27.300358] br-gast: port 3(wlan0-1) entered forwarding state
[   27.314616] br-iot: port 3(wlan0-2) entered blocking state
[   27.320314] br-iot: port 3(wlan0-2) entered disabled state
[   27.326962] device wlan0-2 entered promiscuous mode
[   27.333493] br-iot: port 3(wlan0-2) entered blocking state
[   27.339125] br-iot: port 3(wlan0-2) entered forwarding state
[   27.763549] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-2: link becomes ready
[   27.777443] br-rapw: port 2(wlan0-3) entered blocking state
[   27.783263] br-rapw: port 2(wlan0-3) entered disabled state
[   27.789570] device wlan0-3 entered promiscuous mode
[   27.796480] br-rapw: port 2(wlan0-3) entered blocking state
[   27.802127] br-rapw: port 2(wlan0-3) entered forwarding state
[   27.954752] br-rapw: port 2(wlan0-3) entered disabled state
[   28.219373] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-3: link becomes ready
[   28.226593] br-rapw: port 2(wlan0-3) entered blocking state
[   28.232216] br-rapw: port 2(wlan0-3) entered forwarding state

kernel modules:

root@test:/# lsmod
cfg80211              258960  4 mt76x02_lib,mt7603e,mt76,mac80211
compat                   608  2 mac80211,cfg80211
crc_ccitt               1696  0
crc32c_generic          1376  0
dns_resolver            4272  1 nfsv4
ext4                  413584  0
fat                    58208  1 vfat
gpio_button_hotplug     6944  0
grace                   1328  1 lockd
ip_set                 25744 16 xt_set,ip_set_list_set,ip_set_hash_netportnet,ip_set_hash_netport,ip_set_hash_netnet,ip_set_hash_netiface,ip_set_hash_net,ip_set_hash_mac,ip_set_hash_ipportnet,ip_set_hash_ipportip,ip_set_hash_ipport,ip_set_hash_ipmark,ip_set_hash_ip,ip_set_bitmap_port,ip_set_bitmap_ipmac,ip_set_bitmap_ip
ip_set_bitmap_ip        6976  0
ip_set_bitmap_ipmac     7200  0
ip_set_bitmap_port      6176  0
ip_set_hash_ip         26176  0
ip_set_hash_ipmark     26400  0
ip_set_hash_ipport     26976  0
ip_set_hash_ipportip   28000  0
ip_set_hash_ipportnet   32576  0
ip_set_hash_mac        13632  0
ip_set_hash_net        29696  0
ip_set_hash_netiface   31264  0
ip_set_hash_netnet     32832  0
ip_set_hash_netport    31104  0
ip_set_hash_netportnet   33952  0
ip_set_list_set         7232  0
ip_tables              10848  3 iptable_nat,iptable_mangle,iptable_filter
ip6_tables             10624  2 ip6table_mangle,ip6table_filter
ip6_udp_tunnel          1760  1 wireguard
ip6t_REJECT             1248  2
ip6table_filter          704  1
ip6table_mangle         1184  1
ipt_REJECT              1184  2
iptable_filter           672  1
iptable_mangle           896  1
iptable_nat              768  1
jbd2                   56368  1 ext4
leds_gpio               3040  0
ledtrig_heartbeat       1520  0
ledtrig_usbport         2864  0
lockd                  55232  1 nfs
mac80211              496000  4 mt76x2e,mt76x02_lib,mt7603e,mt76
mbcache                 3952  1 ext4
mt76                   32096  4 mt76x2e,mt76x2_common,mt76x02_lib,mt7603e
mt7603e                38080  0
mt76x02_lib            39872  2 mt76x2e,mt76x2_common
mt76x2_common          11360  1 mt76x2e
mt76x2e                10080  0
nf_conntrack           71280  9 xt_state,xt_nat,xt_conntrack,xt_REDIRECT,xt_MASQUERADE,nf_nat,nf_flow_table,nf_conntrack_rtcache,nf_conntrack_netlink
nf_conntrack_netlink   24112  0
nf_conntrack_rtcache    2400  0
nf_defrag_ipv4          1120  1 nf_conntrack
nf_defrag_ipv6          4976  1 nf_conntrack
nf_flow_table          14864  2 xt_FLOWOFFLOAD,nf_flow_table_hw
nf_flow_table_hw        2416  1
nf_log_common           2624  2 nf_log_ipv4,nf_log_ipv6
nf_log_ipv4             3520  0
nf_log_ipv6             4192  0
nf_nat                 23056  4 iptable_nat,xt_nat,xt_REDIRECT,xt_MASQUERADE
nf_reject_ipv4          2112  1 ipt_REJECT
nf_reject_ipv6          2464  1 ip6t_REJECT
nfnetlink               4560  2 nf_conntrack_netlink,ip_set
nfs                   127680  1 nfsv4
nfsv4                 139152  0
nls_base                5424  6 vfat,fat,nls_utf8,nls_iso8859_1,nls_cp437,usbcore
nls_cp437               4416  0
nls_iso8859_1           2880  0
nls_utf8                 864  0
scsi_mod               86320  2 usb_storage,sd_mod
sd_mod                 29104  0
sunrpc                174064  3 nfsv4,nfs,lockd
swconfig                9680  0
tun                    32640  0
udp_tunnel              2560  1 wireguard
usb_common              2704  3 xhci_plat_hcd,xhci_hcd,usbcore
usb_storage            39888  0
usbcore               140176  6 ledtrig_usbport,usb_storage,xhci_plat_hcd,xhci_pci,xhci_mtk,xhci_hcd
vfat                   10016  0
wireguard              85792  0
x_tables               15472 24 xt_state,xt_nat,xt_conntrack,xt_REDIRECT,xt_MASQUERADE,xt_FLOWOFFLOAD,ipt_REJECT,xt_time,xt_tcpudp,xt_multiport,xt_mark,xt_mac,xt_limit,xt_comment,xt_TCPMSS,xt_LOG,iptable_mangle,iptable_filter,ip_tables,xt_set,ip6table_mangle,ip6table_filter,ip6_tables,ip6t_REJECT
xhci_hcd              113408  3 xhci_plat_hcd,xhci_pci,xhci_mtk
xhci_mtk                4800  0
xhci_pci                3424  0
xhci_plat_hcd           5600  0
xt_FLOWOFFLOAD          3152  0
xt_LOG                   768  0
xt_MASQUERADE            832  0
xt_REDIRECT              704  0
xt_TCPMSS               3168  2
xt_comment               512183
xt_conntrack            2432 24
xt_limit                1312  2
xt_mac                   640  0
xt_mark                  672  0
xt_multiport            1312  0
xt_nat                  2432  0
xt_set                  7328  0
xt_state                 832  0
xt_tcpudp               1824 18
xt_time                 1952  0
root@test:/#

Routers work fine with kernel 4.14.xxx

10.04.20202989Base systemBug ReportVery LowCriticalBoots but no connection can be made to routerTrunkUnconfirmed Task Description

Hardware: ZBT WG3526 16MB RAM
Image file: openwrt-ramips-mt7621-zbtlink_zbt-wg3526-16m-squashfs-sysupgrade.bin
Image Date Stamp: Snapshot Fri Apr 10 06:55:59 2020

Issue: Flashes without issues.

		Boots but no connection can be made to router using web browser I/F, WinSCP or PuTTY.
		Not responding to ping 192.168.1.1.
		All LAN and WAN ports LED's are flashing.
		No Internet connection (WAN)
12.04.20202996KernelBug ReportVery LowCriticalnanopi air cannot start in kernel 5.4.31TrunkUnconfirmed Task Description

device: nanopi air
steps:

1. "git check" to get the last trunk
2. "make menuconfig" select the device "nanopi air"
3. then "make" to get the rom and dd it into TF card
4. power on and you will see stop at "Starting kernel ..."

here is my system log:

U-Boot SPL 2020.01 (Apr 09 2020 - 20:09:21 +0000)
DRAM: 512 MiB
Trying to boot from MMC1


U-Boot 2020.01 (Apr 09 2020 - 20:09:21 +0000) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: FriendlyARM NanoPi NEO
DRAM:  512 MiB
MMC:   mmc@1c0f000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   phy interface0

Error: ethernet@1c30000 address not set.
No ethernet found.

starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
Bus usb@1c1d000: USB EHCI 1.00
Bus usb@1c1d400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
scanning bus usb@1c1d000 for devices... 1 USB Device(s) found
scanning bus usb@1c1d400 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
377 bytes read in 2 ms (183.6 KiB/s)
## Executing script at 43100000
3078032 bytes read in 142 ms (20.7 MiB/s)
19497 bytes read in 3 ms (6.2 MiB/s)
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   ARM OpenWrt Linux-5.4.31
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3077968 Bytes = 2.9 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
EHCI failed to shut down host controller.
   Loading Kernel Image
   Using Device Tree in place at 43000000, end 43007c28

Starting kernel ...
02.05.20203060Base systemBug ReportVery LowCriticalFlashing current trunk on NBG6616 results in bootloopTrunkUnconfirmed Task Description

Installing current trunk esults in bootloop.
First I tried to install it over stock firmware with recovery/tftp but it was stuck in bootloop.
Then I reinstalled 19.07.02 via recovery/tftp - which worked fine.
After that, I tried to install trunk via recovery/tftp, but it also gave bootloop.

The symptoms looks like the ones mentioned below. The problem was fixed, and maybee the same solution is missing in trunk

 FS#168  - Firmware dont boot up on Zyxel NBG6616
 FS#1724  - 18.06.0 release not working on ZyXEL NBG6616 (ar71xx)
https://forum.openwrt.org/t/nbg6616-wan-device-snapshot-bootloop/53944 https://forum.openwrt.org/t/zyxel-nbg6616-bootloop-in-18-0-6-and-18-0-6-1/19355

06.05.20203067PackagesBug ReportVery LowCriticaldownload board.bin failureopenwrt-19.07Unconfirmed Task Description
make[3]: Entering directory '/home/leo/openwrt/package/firmware/ath10k-ct-firmware'
mkdir -p /home/leo/openwrt/dl
SHELL= flock /home/leo/openwrt/tmp/.ath10k-firmware-d622d160e9f552ead68d9ae81b715422892dc2ef-qca9887-board.bin.flock -c '  	/home/leo/openwrt/scripts/download.pl "/home/leo/openwrt/dl" "ath10k-firmware-d622d160e9f552ead68d9ae81b715422892dc2ef-qca9887-board.bin" "cf4df099f6ee05c181f55ce17297a1d32c61d725eb96246fd315ad5587c42426" "board.bin" "@GITHUB/kvalo/ath10k-firmware/d622d160e9f552ead68d9ae81b715422892dc2ef/QCA9887/hw1.0"    '
+ curl -f --connect-timeout 20 --retry 5 --location --insecure https://sources.cdn.openwrt.org/board.bin
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:--  0:00:02 --:--:--     0
curl: (22) The requested URL returned error: 404 
Download failed.
+ curl -f --connect-timeout 20 --retry 5 --location --insecure https://raw.githubusercontent.com/kvalo/ath10k-firmware/d622d160e9f552ead68d9ae81b715422892dc2ef/QCA9887/hw1.0/board.bin
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (7) Failed to connect to raw.githubusercontent.com port 443: Connection refused
Download failed.
+ curl -f --connect-timeout 20 --retry 5 --location --insecure https://raw.githubusercontent.com/kvalo/ath10k-firmware/d622d160e9f552ead68d9ae81b715422892dc2ef/QCA9887/hw1.0/board.bin
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (7) Failed to connect to raw.githubusercontent.com port 443: Connection refused
Download failed.
+ curl -f --connect-timeout 20 --retry 5 --location --insecure https://raw.githubusercontent.com/kvalo/ath10k-firmware/d622d160e9f552ead68d9ae81b715422892dc2ef/QCA9887/hw1.0/board.bin
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (7) Failed to connect to raw.githubusercontent.com port 443: Connection refused
Download failed.
+ curl -f --connect-timeout 20 --retry 5 --location --insecure https://raw.githubusercontent.com/kvalo/ath10k-firmware/d622d160e9f552ead68d9ae81b715422892dc2ef/QCA9887/hw1.0/board.bin
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (7) Failed to connect to raw.githubusercontent.com port 443: Connection refused
Download failed.
+ curl -f --connect-timeout 20 --retry 5 --location --insecure https://raw.githubusercontent.com/kvalo/ath10k-firmware/d622d160e9f552ead68d9ae81b715422892dc2ef/QCA9887/hw1.0/board.bin
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (7) Failed to connect to raw.githubusercontent.com port 443: Connection refused
Download failed.
+ curl -f --connect-timeout 20 --retry 5 --location --insecure https://sources.openwrt.org/board.bin
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:--  0:00:01 --:--:--     0
curl: (22) The requested URL returned error: 404 Not Found
Download failed.
+ curl -f --connect-timeout 20 --retry 5 --location --insecure https://mirror2.openwrt.org/sources/board.bin
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:--  0:00:01 --:--:--     0
curl: (22) The requested URL returned error: 404 Not Found
Download failed.

10.05.20203087Base systemBug ReportVery LowCriticalr13208-426fb8cf84 from downloads.openwrt.org does not b...TrunkUnconfirmed Task Description

Device problem occurs on

Software versions of OpenWrt/LEDE release, packages, etc.

Steps to reproduce

  1. download given image
  2. flash it via TFTP to routers flash
  3. get attached output

caviat

  • I only have this one WhiteBox8 so I can not test if this is an hardware issue. Can somebody else please test it?
15.05.20203099KernelBug ReportVery LowCriticalTP-Link C2600 Kernel 5.4 crashes while accessing invali...TrunkUnconfirmed Task Description

Linux kernel experiences an oops from time to time
- Device: TP-Link Archer C2600
- Kernel Version: 5.4.40
- OpenWRT Version: OpenWrt SNAPSHOT, r13224+16-2308644b0c
- Steps to reproduce: Simply wait. After an unknown amount of time the kernels crashes leading to a reboot.

 


18.05.20203109Base systemBug ReportVery LowCriticalUBIFS failure/crash on BT HomeHub 2B: __nand_correct_da...openwrt-19.07Unconfirmed Task Description

Device: BT HomeHub Version 2B (Lantiq XWAY)

Software: 19.07.3 downloaded from:

https://downloads.openwrt.org/releases/19.07.3/targets/lantiq/xway/openwrt-19.07.3-lantiq-xway-bt_homehub-v2b-squashfs-sysupgrade.bin

After an hour or so of usage, the router reboots itself with a corrupted filesystem. I’ve attached the log to this bug report. The log contains:

__nand_correct_data: uncorrectable ECC error

so I think there might be a link with the similar problem that the BT HomeHub Version 5A had a long time ago, as per:

https://bugs.openwrt.org/index.php?do=details&task_id=245 (”Lede won’t boot on HHB5”)

and

http://openwrt.ebilan.co.uk/viewtopic.php?f=7&t=133#p1022 (post by Mathias Kresin / mkresin who fixed the problem with the Home Hub 5A)

This bug may also be related to:

https://bugs.openwrt.org/index.php?do=details&task_id=1842

(I think that this bug may affect every release since 18.06.0)

27.05.20203129Base systemBug ReportVery LowCriticalUQMI won’t connect with Private APNTrunkUnconfirmed Task Description

UQMI won’t connect with Private APN
Hey Folks,

I have a Problem with the QMI protocol.

I bought a private ip from my ISP and can’t connect with the private APN, only the dynamic IP APN works.

With ModemManager the connection to my Private APN works as expected, so no fault on ISP side.
With crosscompile Quectel-cm to OpenWRT, the connection with qmi protocol to my Private APN works as expected, so no fault on ISP side.

 


05.06.20203151Base systemBug ReportVery LowCriticalKimax U35WF overlay memoryTrunkUnconfirmed Task Description

Kimax Blueendless U35WF
Original Kimax firmware

install
openwrt-19.07.3-ramips-mt7620-kimax_u35wf-initramfs-kernel.bin
problems: IP configuration lost after power up
unable to install any package (overlay memory),
unable to generate backup firmware config archive (no contents).
No version 18.06 available for this model to downgrade.

Flash new firmware image
openwrt-19.07.3-ramips-mt7620-kimax_u35wf-squashfs-sysupgrade.bin
and ok

27.06.20203206Base systemBug ReportVery LowCriticalsysupgrade from 18.06.8 to 19.07.0..trunk results in a ...TrunkUnconfirmed Task Description

After a sysupgrade from 18.06.8 to 19.07.0, 19.07.3, or trunk as of 2020-06-28, the router is stuck in an UBI-related boot loop.

Boot log for trunk:

===================================================================
                MT7621   stage1 code 10:33:11 (ASIC)
                CPU=50000000 HZ BUS=16666666 HZ
==================================================================
Change MPLL source from XTAL to CR...
do MEMPLL setting..
MEMPLL Config : 0x11100000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1200Mhz ===
PLL2 FB_DL: 0xf, 1/0 = 634/390 3D000000
PLL4 FB_DL: 0x14, 1/0 = 514/510 51000000
PLL3 FB_DL: 0x1a, 1/0 = 703/321 69000000
do DDR setting..[00320381]
Apply DDR3 Setting...(use customer AC)
          0    8   16   24   32   40   48   56   64   72   80   88   96  104  112  120
W: g.applet.interface.uart: 3173 frame or parity errors detected
      --------------------------------------------------------------------------------
0000:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0001:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0002:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0003:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0004:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0005:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0006:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0007:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0008:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0009:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    1    1    1
000E:|    0    0    0    0    0    0    0    0    1    1    1    1    1    1    1    1
000F:|    0    0    0    0    1    1    1    1    1    1    1    1    0    0    0    0
0010:|    1    1    1    1    1    1    1    1    0    0    0    0    0    0    0    0
0011:|    1    1    1    0    0    0    0    0    0    0    0    0    0    0    0    0
0012:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0013:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0014:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0015:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0016:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0017:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0018:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0019:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001E:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001F:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
rank 0 coarse = 16
rank 0 fine = 32
B:|    0    0    0    0    0    0    0    0    1    1    1    0    0    0    0    0
opt_dle value:9
DRAMC_R0DELDLY[018]=00001B1C
==================================================================
                RX      DQS perbit delay software calibration 
==================================================================
1.0-15 bit dq delay value
==================================================================
bit|     0  1  2  3  4  5  6  7  8  9
--------------------------------------
0 |    10 8 10 11 11 7 11 8 8 9 
10 |    9 12 7 10 9 11 
--------------------------------------

==================================================================
2.dqs window
x=pass dqs delay value (min~max)center 
y=0-7bit DQ of every group
input delay:DQS0 =28 DQS1 = 27
==================================================================
bit     DQS0     bit      DQS1
0  (1~53)27  8  (1~53)27
1  (1~52)26  9  (1~49)25
2  (1~53)27  10  (1~53)27
3  (1~55)28  11  (1~52)26
4  (1~54)27  12  (1~53)27
5  (0~53)26  13  (1~51)26
6  (1~52)26  14  (1~52)26
7  (1~52)26  15  (1~53)27
==================================================================
3.dq delay value last
==================================================================
bit|    0  1  2  3  4  5  6  7  8   9
--------------------------------------
0 |    11 10 11 11 12 9 13 10 8 11 
10 |    9 13 7 11 10 11 
==================================================================
==================================================================
     TX  perbyte calibration 
==================================================================
DQS loop = 15, cmp_err_1 = ffff0800 
dqs_perbyte_dly.last_dqsdly_pass[0]=15,  finish count=1 
DQS loop = 14, cmp_err_1 = ffff0000 
dqs_perbyte_dly.last_dqsdly_pass[1]=14,  finish count=2 
DQ loop=15, cmp_err_1 = ffff01aa
DQ loop=14, cmp_err_1 = ffff0080
dqs_perbyte_dly.last_dqdly_pass[1]=14,  finish count=1 
DQ loop=13, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqdly_pass[0]=13,  finish count=2 
byte:0, (DQS,DQ)=(9,8)
byte:1, (DQS,DQ)=(8,8)
20,data:89
[EMI] DRAMC calibration passed

===================================================================
                MT7621   stage1 code done 
                CPU=50000000 HZ BUS=16666666 HZ
===================================================================


U-Boot 1.1.3 (Aug 30 2017 - 02:28:33)

Board: Ralink APSoC DRAM:  256 MB
relocate_code Pointer at: 8ffb0000

Config XHCI 40M PLL 
Allocate 16 byte aligned buffer: 8ffe1940
Enable NFI Clock
# MTK NAND # : Use HW ECC
NAND ID [C2 DA 90 95 06]
Device found in MTK table, ID: c2da, EXT_ID: 909506
Support this Device in MTK table! c2da 
select_chip
[NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
Signature matched and data read!
load_fact_bbt success 2047
load fact bbt success
[mtk_nand] probe successfully!
mtd->writesize=2048 mtd->oobsize=64,    mtd->erasesize=131072  devinfo.iowidth=8
..
UBNT e51 13-02122-14 B4FBE4B3E6EE
UBNT BD type=e51, mac=B4FBE4B3E6EE, s/n=B4FBE4B3E6EE, mrev=14, k_idx=1
============================================ 
Ralink UBoot Version: 4.3.S.0
-------------------------------------------- 
ASIC MT7621A DualCore (MAC to MT7530 Mode)
DRAM_CONF_FROM: Auto-Detection 
DRAM_TYPE: DDR3 
DRAM bus: 16 bit
Xtal Mode=3 OCP Ratio=1/3
Flash component: NAND Flash
Date:Aug 30 2017  Time:02:28:33
============================================ 
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:256, ways:4, linesz:32 ,total:32768 

 ##### The CPU freq = 880 MHZ #### 
 estimate memory size =256 Mbytes
#Reset_MT7530
Enable port 0

Please choose the operation: 
   1: Load system code to SDRAM via TFTP. 
   2: Load system code then write to Flash via TFTP. 
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   7: Load Boot Loader code then write to Flash via Serial. 
   9: Load Boot Loader code then write to Flash via TFTP. 
default: 3
 3 
You choosed 3

 0 
   
3: System Boot system code via Flash.
## Booting image at c0040000 ...
   Image Name:   MIPS OpenWrt Linux-5.4.48
   Image Type:   MIPS Linux Kernel Image (uncompressed)
   Data Size:    2435865 Bytes =  2.3 MB
   Load Address: 80001000
   Entry Point:  80001000
......................................   Verifying Checksum ... OK
OK
No initrd
## Transferring control to Linux (at address 80001000) ...
## Giving linux memsize in MB, 256

Starting kernel ...



OpenWrt kernel loader for MIPS based SoC
Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
Decompressing kernel... done!
Starting kernel at 80001000...

[    0.000000] Linux version 5.4.48 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13649-b1d5ab1a69)) #0 SMP Fri Jun 26 22:33:29 2020
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Ubiquiti EdgeRouter X SFP
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] percpu: Embedded 14 pages/cpu s26704 r8192 d22448 u57344
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00032940
[    0.000000] Readback ErrCtl register=00032940
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 250536K/262144K available (5846K kernel code, 201K rwdata, 1260K rodata, 1256K init, 237K bss, 11608K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 256
[    0.000000] random: get_random_bytes called from start_kernel+0x340/0x558 with crng_init=0
[    0.000000] CPU Clock: 880MHz
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.015483] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
[    0.055830] pid_max: default: 32768 minimum: 301
[    0.065180] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.079586] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.097702] rcu: Hierarchical SRCU implementation.
[    0.107813] smp: Bringing up secondary CPUs ...
[    4.135874] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    4.135885] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    4.135897] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    4.135995] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.144999] Synchronize counters for CPU 1: done.
[    4.226937] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    4.226945] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    4.226952] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    4.227006] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.239460] Synchronize counters for CPU 2: done.
[    4.318055] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    4.318064] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    4.318072] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    4.318129] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.327061] Synchronize counters for CPU 3: done.
[    0.386664] smp: Brought up 1 node, 4 CPUs
[    0.398972] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.418237] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.432169] pinctrl core: initialized pinctrl subsystem
[    0.443530] NET: Registered protocol family 16
[    0.481661] clocksource: Switched to clocksource GIC
[    0.493356] NET: Registered protocol family 2
[    0.502975] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.519574] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.534699] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.548872] TCP: Hash tables configured (established 2048 bind 2048)
[    0.561648] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.574529] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.588595] NET: Registered protocol family 1
[    0.597152] PCI: CLS 0 bytes, default 32
[    0.693612] 4 CPUs re-calibrate udelay(lpj = 1167360)
[    0.705093] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    0.719864] random: fast init done
[    0.725746] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.738153] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.760502] GPIO line 487 (sfp_i2c_clk_gate) hogged as output/high
[    0.772946] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.784177] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.795396] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.807068] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.822849] printk: console [ttyS0] disabled
[    0.831301] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[    0.849226] printk: console [ttyS0] enabled
[    0.849226] printk: console [ttyS0] enabled
[    0.865790] printk: bootconsole [early0] disabled
[    0.865790] printk: bootconsole [early0] disabled
[    0.886838] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388
[    0.901809] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
[    0.914464] nand: Macronix MX30LF2G18AC
[    0.922100] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.937174] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
[    0.950207] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[    0.964763] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[    0.979322] Scanning device for bad blocks
[    2.388364] Bad eraseblock 1105 at 0x000008a20000
[    3.591347] 6 fixed-partitions partitions found on MTD device mt7621-nand
[    3.604863] Creating 6 MTD partitions on "mt7621-nand":
[    3.615275] 0x000000000000-0x000000080000 : "u-boot"
[    3.626464] 0x000000080000-0x0000000e0000 : "u-boot-env"
[    3.638343] 0x0000000e0000-0x000000140000 : "factory"
[    3.649566] 0x000000140000-0x000000440000 : "kernel1"
[    3.660834] 0x000000440000-0x000000740000 : "kernel2"
[    3.672135] 0x000000740000-0x00000ff00000 : "ubi"
[    3.684934] libphy: Fixed MDIO Bus: probed
[    3.720110] libphy: mdio: probed
[    3.726777] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    3.741399] mtk_soc_eth 1e100000.ethernet dsa: mediatek frame engine at 0xbe100000, irq 20
[    3.759062] i2c-mt7621 1e000900.i2c: clock 100 kHz
[    3.772209] NET: Registered protocol family 10
[    3.782778] Segment Routing with IPv6
[    3.790195] NET: Registered protocol family 17
[    3.799123] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    3.825176] 8021q: 802.1Q VLAN Support v1.8
[    3.835469] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    3.858806] libphy: dsa slave smi: probed
[    3.867214] mt7530 mdio-bus:1f eth0 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
[    3.885166] mt7530 mdio-bus:1f eth1 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
[    3.903046] mt7530 mdio-bus:1f eth2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
[    3.920926] mt7530 mdio-bus:1f eth3 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
[    3.938853] mt7530 mdio-bus:1f eth4 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
[    3.956767] mt7530 mdio-bus:1f eth5 (uninitialized): PHY [mdio-bus:07] driver [Atheros 8031 ethernet]
[    3.976479] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
[    3.994051] DSA: tree 0 setup
[    4.000412] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
[    4.001465] UBI: auto-attach mtd5
[    4.020764] ubi0: attaching mtd5
[    5.358573] ubi0 error: ubi_attach: bad image sequence number 1717396771 in PEB 1048, expected 1051561099
[    5.377643] Erase counter header dump:
[    5.385097]  magic          0x55424923
[    5.392554]  version        1
[    5.398455]  ec             0
[    5.404352]  vid_hdr_offset 2048
[    5.410778]  data_offset    4096
[    5.417194]  image_seq      1717396771
[    5.424651]  hdr_crc        0x41f68dff
[    5.432107] erase counter header hexdump:
[    5.440521] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd5, error -22
[    5.454595] UBI error: cannot attach mtd5
[    5.462601] hctosys: unable to open rtc device (rtc0)
[    5.473495] /dev/root: Can't open blockdev
[    5.481701] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[    5.496596] Please append a correct "root=" boot option; here are the available partitions:
[    5.513231] 1f00             512 mtdblock0 
[    5.513235]  (driver?)
[    5.526248] 1f01             384 mtdblock1 
[    5.526251]  (driver?)
[    5.539271] 1f02             384 mtdblock2 
[    5.539274]  (driver?)
[    5.552283] 1f03            3072 mtdblock3 
[    5.552286]  (driver?)
[    5.565294] 1f04            3072 mtdblock4 
[    5.565298]  (driver?)
[    5.578321] 1f05          253696 mtdblock5 
[    5.578324]  (driver?)
[    5.591333] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    5.607798] Rebooting in 1 seconds..

I’ve observed a few different errors on 19.07.3:

[    3.452384] UBI: auto-attach mtd5
[    3.459042] ubi0: attaching mtd5
[    5.063106] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
[    5.731856] ubi0: scanning is finished
[    5.753342] ubi0 error: 0x802f7820: bad attaching information, error 1
[    5.766336] Volume attaching information dump:
[    5.775176]  vol_id         0
[    5.781076]  highest_lnum   526
[    5.787307]  leb_count      15
[    5.793384]  compat         0
[    5.799284]  vol_type       3
[    5.805170]  used_ebs       0
[    5.811068]  last_data_size 0
[    5.816954]  data_pad       0
[    5.818148] mtk_soc_eth 1e100000.ethernet eth0: port 1 link down
[    5.822855] Volume information dump:
[    5.841894]  vol_id          0
[    5.847953]  reserved_pebs   14
[    5.854197]  alignment       1
[    5.860273]  data_pad        0
[    5.866332]  vol_type        3
[    5.872403]  name_len        6
[    5.878461]  usable_leb_size 126976
[    5.885396]  used_ebs        14
[    5.891642]  used_bytes      1777664
[    5.898752]  last_eb_bytes   126976
[    5.905674]  corrupted       0
[    5.911746]  upd_marker      0
[    5.917805]  name            rootfs
[    5.925375] ubi0 error: 0x802fb1ec: failed to attach mtd5, error -22
[    5.938048] UBI error: cannot attach mtd5
[    3.443331] UBI: auto-attach mtd5
[    3.450022] ubi0: attaching mtd5
[    4.654666] ubi0 error: 0x80307340: bad image sequence number 1717396771 in PEB 1048, expected 1051561099
[    4.673719] Erase counter header dump:
[    4.681180]  magic          0x55424923
[    4.688623]  version        1
[    4.694526]  ec             0
[    4.700432]  vid_hdr_offset 2048
[    4.706837]  data_offset    4096
[    4.713259]  image_seq      1717396771
[    4.720720]  hdr_crc        0x41f68dff
[    4.728160] erase counter header hexdump:
[    4.736480] ubi0 error: 0x802fb1ec: failed to attach mtd5, error -22
[    4.749165] UBI error: cannot attach mtd5
30.06.20203211KernelBug ReportVery LowCriticalwrt1200ac issue with mvneta driver in 5.4 kernel - inte...TrunkUnconfirmed Task Description

wrt1200ac works OK with 4.19.108 kernel. eth1 is the upstream port, eth0 is the 4 local gigabit ports. dmesg reports:

[ 1.098981] 0×000000280000-0×000000900000 : “unused_area” [ 1.105081] libphy: Fixed MDIO Bus: probed
[ 1.109546] libphy: orion_mdio_bus: probed
[ 1.113853] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.122882] mvneta f1070000.ethernet eth0: Using hardware mac address c0:56:27:70:5b:65
[ 1.132447] mvneta f1034000.ethernet eth1: Using random mac address 9e:2e:40:0f:3a:63
[ 1.140510] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.147081] ehci-pci: EHCI PCI platform driver
[ 1.151575] ehci-platform: EHCI generic platform driver
[ 1.156913] ehci-orion: EHCI orion driver
[ 1.161040] orion-ehci f1058000.usb: EHCI Host Controller

Under the 5.4.48 kernel, eth1 doesn’t show up, so no upstream connectivity.

[ 1.208713] orion-mdio f1072004.mdio: IRQ index 0 not found
[ 1.214360] libphy: orion_mdio_bus: probed
[ 1.218622] mv88e6085 f1072004.mdio-mii:00: switch 0×1760 detected: Marvell 88E6176, revision 1
[ 1.389672] libphy: mv88e6xxx SMI: probed
[ 1.395805] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.404784] mvneta f1070000.ethernet eth0: Using hardware mac address c0:56:27:70:5b:65
[ 1.412919] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.419511] ehci-pci: EHCI PCI platform driver
[ 1.424011] ehci-platform: EHCI generic platform driver
[ 1.429356] ehci-orion: EHCI orion driver
[ 1.433476] orion-ehci f1058000.usb: EHCI Host Controller


28.07.20203253Base systemBug ReportVery LowCriticalLinksys WRT3200 ipv4 connection speed problems openwrt-19.07Unconfirmed Task Description

I’m using Linksys wrt3200 as router behind cable modem with a dslite configuration and Devolo 1200+ DinRail connected to one of the LAN ports.

Previuos configuration was provider cable modem connected to Devolo and it was working fine (up to 50-100 mbit up and download to all DLAN devices.

After swiching to Linksys and OpenWRT I noticed that download speed for IPv4 dropped to 2-3 MBit for all devices. Upload and IPv6 work fine.

Thought it was dslite problem but provider router works fine and if I connect to Linksys directly via WLAN the download speed is as expected...

Repatched with Linksys stock firmware without changing anything else stable up and download speeds in expected range for ip4/ip6.

Patched openwrt back - ipv4 download drop to 2Mbit, back to stock back to normal speed...

Assume it’s potentially an MTU setting for LAN interface but all values I tried did not change much...

Would appreciate any help. Would be pity to fall back to stock but if it’s the only option...

 


01.08.20203262KernelBug ReportVery LowCriticalpcduino(sunxi/cortexa8) kernel panic on openwrt snapsh...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on pcduino [target/linux/sunxi/cortexa8]
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce


U-Boot SPL 2020.04 (Jul 31 2020 - 21:50:38 +0000)
DRAM: 1024 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1 U-Boot 2020.04 (Jul 31 2020 - 21:50:38 +0000) Allwinner Technology CPU: Allwinner A10 (SUN4I)
Model: LinkSprite pcDuino
I2C: ready
DRAM: 1 GiB
MMC: mmc@1c0f000: 0
Loading Environment from FAT...
* Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Net: eth0: ethernet@1c0b000
starting USB...
Bus usb@1c14000: USB EHCI 1.00
Bus usb@1c14400: USB OHCI 1.0
Bus usb@1c1c000: USB EHCI 1.00
Bus usb@1c1c400: USB OHCI 1.0
scanning bus usb@1c14000 for devices... 1 USB Device(s) found
scanning bus usb@1c14400 for devices... 1 USB Device(s) found
scanning bus usb@1c1c000 for devices... 1 USB Device(s) found
scanning bus usb@1c1c400 for devices... 1 USB Device(s) found

     scanning usb for storage devices... 0 Storage Device(s) found

Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
377 bytes read in 1 ms (368.2 KiB/s)
## Executing script at 43100000
3308120 bytes read in 265 ms (11.9 MiB/s)
22889 bytes read in 5 ms (4.4 MiB/s)
## Booting kernel from Legacy Image at 42000000 ...

 Image Name:   ARM OpenWrt Linux-5.4.52
 Image Type:   ARM Linux Kernel Image (uncompressed)
 Data Size:    3308056 Bytes = 3.2 MiB
 Load Address: 40008000
 Entry Point:  40008000
 Verifying Checksum ... OK

## Flattened Device Tree blob at 43000000

 Booting using the fdt blob at 0x43000000

EHCI failed to shut down host controller.

 Loading Kernel Image
 Using Device Tree in place at 43000000, end 43008968

Starting kernel ...

**

kernel panic

02.08.20203264Base systemBug ReportVery LowCriticalR7800 router crashes when Macbook Air joins the networkTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: Netgear R7800 Router, Macbook Air 11” Mid-2013, Macbook Air 13” 2017
- Software versions of OpenWrt/LEDE release: LuCI branch git-20.201.65700-7edd635
- Steps to reproduce: I join the device to the network with either ethernet or wifi and the router would shortly crash. I simply reboot the router and connect the macbook via ethernet or wifi after the router is up. I would then run a speedtest (it’s not related to any particular activity, but I just use speedtest.net as a control)
- Attempts at trying to remedy issue: I tried disabling IPv6 on the router and macbooks. I signed out of icloud. I updated Macbooks to MacOS Catalina. I tried flashing router to latest stable release 19.07.3. The network only dies when these Macbook Airs connect to the network, all other devices don’t have any issues. Prior to this router, I had a Netgear AC1900 (R7000) running DD-WRT which never had this issue.

External logs captured before crash:
8/2/2020 14:14 Alert 192.168.1.1 [ 189.332615] 8←– cut here — 8/2/2020 14:14 Alert 192.168.1.1 [ 189.332636] Unable to handle kernel NULL pointer dereference at virtual address 0000000c
8/2/2020 14:14 Alert 192.168.1.1 [ 189.334560] pgd = eb7a8104
8/2/2020 14:14 Alert 192.168.1.1 [ 189.342856] [0000000c] *pgd=00000000
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.345391] Internal error: Oops: 17 [#1] SMP ARM
8/2/2020 14:14 Warning 192.168.1.1 [ 189.349049] Modules linked in: ksmbd ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath qmi_wwan pppox ppp_generic mac80211 iptable_nat ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_policy xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_geoip xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_MASQUERADE xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY wireguard usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc sch_cake nf_reject_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack_netlink nf_conncount iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables crc_ccitt compat cdc_wdm fuse act_connmark nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall
8/2/2020 14:14 Warning 192.168.1.1 [ 189.349149] cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport ledtrig_heartbeat xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip6_gre ip_gre gre ifb ip6_udp_tunnel udp_tunnel sit ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel ipcomp esp4 ah4 ip6_tunnel tunnel6 tunnel4 ip_tunnel tun xfrm_user xfrm_ipcomp af_key xfrm_algo vfat fat autofs4 nls_utf8 nls_iso8859_1 nls_cp437 rfkill sha512_generic sha1_generic seqiv md5 md4 ghash_generic gf128mul gcm echainiv ecb des_generic libdes ctr cmac ccm cbc authenc arc4 uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom ohci_platform ohci_hcd phy_qcom_dwc3 ahci
8/2/2020 14:14 Warning 192.168.1.1 [ 189.418843] fsl_mph_dr_of ehci_platform ehci_fsl sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug f2fs ext4 mbcache jbd2 exfat(C) crc32c_generic crc32_generic
8/2/2020 14:14 Warning 192.168.1.1 [ 189.528411] CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G C 5.4.52 #0
8/2/2020 14:14 Warning 192.168.1.1 [ 189.546362] Hardware name: Generic DT based system
8/2/2020 14:14 Warning 192.168.1.1 [ 189.553873] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
8/2/2020 14:14 Warning 192.168.1.1 [ 189.558534] PC is at ksmbd_free_user+0xc/0×38 [ksmbd]
8/2/2020 14:14 Warning 192.168.1.1 [ 189.564001] LR is at smb_session_disconnect+0×40/0xa4 [ksmbd]
8/2/2020 14:14 Warning 192.168.1.1 [ 189.569016] pc : [<bf9242e0>] lr : [<bf9402ac>] psr: 60000013
8/2/2020 14:14 Warning 192.168.1.1 [ 189.574745] sp : dd459ee0 ip : d83da240 fp : bf94f004
8/2/2020 14:14 Warning 192.168.1.1 [ 189.580820] r10: bf958234 r9 : 000001d0 r8 : bf957b58
8/2/2020 14:14 Warning 192.168.1.1 [ 189.586030] r7 : d83da200 r6 : 00000000 r5 : d69b2a00 r4 : 00000000
8/2/2020 14:14 Warning 192.168.1.1 [ 189.591238] r3 : d83da200 r2 : 00000003 r1 : 00000001 r0 : 00000000
8/2/2020 14:14 Warning 192.168.1.1 [ 189.597838] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
8/2/2020 14:14 Warning 192.168.1.1 [ 189.604348] Control: 10c5787d Table: 5eb7806a DAC: 00000051
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.611551] Process kworker/0:0 (pid: 5
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.617280] Stack: (0xdd459ee0 to 0xdd45a000)
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.623367] 9ee0: dcbcc480 bf9402ac d83da200 dcbcc480 dcbcc4dc 00000074 bf957b58 bf9290e4
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.627799] 9f00: dcddb704 dcde6400 c0c221cc dcbcc4dc dd40f500 dda09840 ff7e6500 00000000
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.635957] 9f20: 00000000 00000000 dd458000 c033a684 00000008 dda09858 dd40f500 dd40f514
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.644116] 9f40: dda09840 00000008 dda09858 c0c03d00 dda09840 c033a948 c0c0c35c c0c0c318
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.652276] 9f60: dd41951c dd419500 dd419280 dd458000 dd41951c dd43bea4 dd40f500 c033a8f4
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.660436] 9f80: 00000000 c0340724 00000000 dd419280 c0340608 00000000 00000000 00000000
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.668596] 9fa0: 00000000 00000000 00000000 c03010e8 00000000 00000000 00000000 00000000
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.676755] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.684915] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
8/2/2020 14:14 Warning 192.168.1.1 [ 189.693179] [<bf9242e0>] (ksmbd_free_user [ksmbd]) from [<bf9402ac>] (smb_session_disconnect+0×40/0xa4 [ksmbd])
8/2/2020 14:14 Warning 192.168.1.1 [ 189.701271] [<bf9402ac>] (smb_session_disconnect [ksmbd]) from [<bf9290e4>] (handle_ksmbd_work+0x18c/0×500 [ksmbd])
8/2/2020 14:14 Warning 192.168.1.1 [ 189.711150] [<bf9290e4>] (handle_ksmbd_work [ksmbd]) from [<c033a684>] (process_one_work+0x1f8/0×468)
8/2/2020 14:14 Warning 192.168.1.1 [ 189.721543] [<c033a684>] (process_one_work) from [<c033a948>] (worker_thread+0×54/0×588)
8/2/2020 14:14 Warning 192.168.1.1 [ 189.730919] [<c033a948>] (worker_thread) from [<c0340724>] (kthread+0x11c/0×148)
8/2/2020 14:14 Warning 192.168.1.1 [ 189.739077] [<c0340724>] (kthread) from [<c03010e8>] (ret_from_fork+0×14/0x2c)
8/2/2020 14:14 Warning 192.168.1.1 [ 189.746448] Exception stack(0xdd459fb0 to 0xdd459ff8)
8/2/2020 14:14 Warning 192.168.1.1 [ 189.753483] 9fa0: 00000000 00000000 00000000 00000000
8/2/2020 14:14 Warning 192.168.1.1 [ 189.758613] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8/2/2020 14:14 Warning 192.168.1.1 [ 189.766769] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
8/2/2020 14:14 Emergency 192.168.1.1 [ 189.774929] Code: eaffffd1 e52d4008 e1a04000 e58de004 (e590000c)
8/2/2020 14:14 Warning 192.168.1.1 [ 189.781453] —[ end trace 469d54bcbf49ae73 ]—

09.08.20203280Base systemBug ReportVery LowCriticalWan interface and sometimes lan interfaces randomly go ...TrunkUnconfirmed Task Description

- Versions where bug is present: OpenWRT snapshots, tested with r13938 and r18039.

- Affected device: D-Link DIR-878 and likely others from its family.

- What does it do and shouldn’t do: the ethernet interfaces randomly get switched on/off, dropping the link and resetting the connection. Troubleshooting has already been thoroughly conducted to rule out other causes, see below. This is critical severity because makes OpenWRT unusable in these devices.

- Steps to reproduce:
– flash the snapshot image on a D-Link DIR-878;
– configure the WAN (tested with PPPoE and DHCP protocols) and LAN interfaces (tested with Static and DHCP protocols) - using all interfaces will increase the likelihood that at least one of them will present the behaviour;
– wait an indefinite but reasonable (< 2h for all instances so far) amount of time;
– the interface will randomly be put down and then up a couple seconds later, and it will be randomly looping up/down states at random amounts of time.

- Troubleshooting already conducted: full and detailed troubleshooting history is present at this forum thread. Please let me know if I can provide further information.

- Additional info: some people are having WiFi issues with MT7621 family devices that might be related to this one if they share a common cause, such as a possible race condition in the drivers;

21.08.20203298Base systemBug ReportVery LowCriticalEdimax 3G-6200n z OpenWrt 19.07.2 lost settings after r...openwrt-19.07Unconfirmed Task Description

Edimax 3G-6200n OpenWrt 19.07.2, r10947-65030d81f3

Steps:
1. Download the latest version OpenWrt 19.07.2 to Edimax 3G-6200n.
2. Set e.g. the password to the router and/or turn on the WiFi.
3. Reboot the router with the reboot option in OpenWrt.
4. The router has no settings previously saved - the status is as right after installing fresh OpenWRT - no password, no WiFi enabled, default settings.

Problem with JFFS.

root@OpenWrt:~# mount
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /tmp/root type tmpfs (rw,noatime,mode=755)
overlayfs:/tmp/root on / type overlay (rw,noatime,lowerdir=/,upperdir=/tmp/root/upper,workdir=/tmp/root/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
root@OpenWrt:~# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 3.0M      3.0M         0 100% /rom
tmpfs                    13.8M    284.0K     13.5M   2% /tmp
tmpfs                    13.8M     60.0K     13.7M   0% /tmp/root
overlayfs:/tmp/root      13.8M     60.0K     13.7M   0% /
tmpfs                   512.0K         0    512.0K   0% /dev

root@OpenWrt:~# free
              total        used        free      shared  buff/cache   available
Mem:          28276       14008        5224         344        9044       11872
Swap:             0           0           0
#here I added the password and turned on the WiFi network - the free RAM decreased
root@OpenWrt:~# free
              total        used        free      shared  buff/cache   available
Mem:          28276       15632        3496         368        9148       10236
Swap:             0           0           0
root@OpenWrt:~#
21.08.20203299Base systemBug ReportVery LowCriticalbusybox: Alternatives gets overwrited when busybox upda...TrunkUnconfirmed Task Description

This is device independent and I think it affects all versions but I have seen this over 19.07. If you have binary programs that conflicts with busybox ones, opkg sets them to be used instead when they are installed.

I discovered this because mwan3 got broke and investigating the error it dropped the problems seems to be that the ip binary from busybox doesn’t support some features mwan3 needs. I could find that I had ip installed as is a dependency of mwan3 so I just remembered that busybox was updated recently.

Just by reinstalling ip the issue was solved.

I don’t know how this could be managed, perhaps just when a package that has alternatives is installed update them and when the package is being upgraded ignore updating the alternatives.

I set this critical just because it could be very difficult to see where the problem is for many people (I surprised myself how it could take so many time to advert the real issue when I found it, it’s simple, but if you don’t notice busybox upgrading could be cumbersome to see), and, this could break things, like for example mwan3 or any other program that rely using alternative binaries and not the busybox ones. Of course fell free to set the severity you think could be more accurate.

22.08.20203300KernelBug ReportVery LowCriticalQualcomm, MediaTek Wi-Fi Chips Vulnerable to Kr00k-Like...AllUnconfirmed Task Description

I don’t know if openwrt is/was affected
https://www.securityweek.com/qualcomm-mediatek-wi-fi-chips-vulnerable-kr00k-attacks

17.09.20203345Base systemBug ReportVery LowCriticalWifi off TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on TP-Link TL-WR842N v5.
- OpenWrt/LEDE 19.07.04 with last updating.
- Just use wifi on the device. It have random wifi off about 1 min.
Log:
https://pastebin.com/c64H5kCR

28.09.20203365Base systemBug ReportVery LowCriticalaccess USB storage in LEDE for Talon AD7200TrunkUnconfirmed Task Description

Anybody have an ideal to access USB storage at Talon AD72000 with nexmon firmware? lede-ad7200?

Several ways I have tried:

1. search for path like `/mnt/dev` `/dev/`, I can see my usb flash disk led blinking and there show up the device after I insert the disk, but I can NOT cd into the disk

2. install other tool via `opkg`, especially Quick Start for Adding a USB drive, however, the whole OS will crash down when install `kmod-usb-storage` at step 3 and I have to start all over.

Let me know if any solution

Best.

09.10.20203372Base systemBug ReportVery LowCriticalAfter flashing 19.07.4 on Kingston MLWG2, no network ar...openwrt-19.07Unconfirmed Task Description

Just flashed 19.07.4 on Kingston MLWG2.

Followed online procedure found (copy image to SD card, touch special file, login via telnet on stock firmware, write image, reboot device) to flash OpenWRT.

After flash, device “seems” stuck dead (all leds are on, wired network irresponsive, no WiFi AP detected).

I have opened the device, soldered the serial console pins and accessere via serial console.

Device is actually booting perfectly, but both wired and wifi are not accessible.

1. I have WiFi enabled by setting “disabled = 0” in /etc/config/wireless to OpenWrt AP

2. I have Wired enabled by adding “option iface “eth0”” to the “lan” interface in /etc/config/network

3. Device now works great

Without these two changes, the device is as good as dead.

This is a peculiar device: only 1 ethernet port and 2.4Ghz Wifi. My guess something is wrong in the vlan/bridge/switch settings?

I hope a fix can be commited somehow so that future users do not end up with a dead-like device.

 


23.10.20203402Base systemBug ReportVery LowCriticalRUT955: Seriously brokenTrunkUnconfirmed Task Description

RS485 and RS232 (DB9) unusable on my recent RUT955, batch 84.
I want to use RS485 (in worst case, RS232) for modbus comms.

However, my custom built image basically works, incl. mqtt, mwan3, LTE (EC25) etc.
The firmware from TELTONIKA runs without problems.
For strange boot log, pls refere to
https://forum.openwrt.org/t/teltonika-rut955-tainted-kernel-ath1/77335/2

 


16.11.20203457KernelBug ReportVery LowCriticalipq40xx: NBG6617/B-1300 using VLANs is incredibly slow ...openwrt-19.07Unconfirmed Task Description

The listed config below is running fine on 19.07 till 19.07.3. From 19.07.4 on the throughput to peers on the tagged VLANs falls below 10Mbit/s. Seems there is some regression introduced on 19.07.4.

Sample config:

config interface 'ff_dhcp'
	option proto 'static'
	option ifname 'eth0.30'
	option ipaddr '10.36.164.65/27'

config interface 'mgmt'
	option proto 'static'
	option ifname 'eth0.42'
	option ipaddr '10.36.190.177/28'

config switch_vlan
	option device 'switch0'
	option vlan '30'
	option ports '0t 3 4'

config switch_vlan
	option device 'switch0'
	option vlan '42'
	option ports '0t 3t 4t'

* Note:
As essedma has some bugs i cannot use switchport, which is hardcoded to VLAN2. But i’m fine with just leaving it as it is.

29.12.20203544Base systemBug ReportVery LowCritical5GHz band of several ath10k devices are completely unus...TrunkUnconfirmed Task Description

- Device: Custom router board with mini PCIE slots
- Software version: OpenWrt SNAPSHOT r0-7e4585e
- Steps to reproduce:
* Git clone https://github.com/openwrt/openwrt then build with default configuration + enable ath10k & fw.
* Install an ath10k card (tested: QCA9880, QCA6174) on router board, and flash image to device.
* Run `iw list` and every 5GHz band is disabled.

Changing country code via LuCI and `iw reg set` won’t help.

Using ath10k-ct won’t help as well.

ath9k is not affected.

Logs are in attachments.

08.01.20213565KernelBug ReportVery LowCritical19.07.5 wifi for WRT1900AC v1 regressionopenwrt-19.07Unconfirmed Task Description

Device problem occurs on: Supply the following if possible:
Software versions of OpenWrt/LEDE release: OpenWrt 19.07.5, r11257-5090152ae3
WiFi dies every now and then, I had to roll back to 19.07.4.

[ 757.192788] wlan1: failed to remove key (0, 98:09:cf:ae:1d:1e) from hardware (-5)
[ 757.212705] ieee80211 phy1: MACREG_REG_INT_CODE: 0×0000 [ 777.284194] ieee80211 phy1: cmd 0×9122=UpdateEncryption timed out
[ 777.290372] ieee80211 phy1: return code: 0×1122 [ 777.294925] ieee80211 phy1: timeout: 0×1122 [ 777.299158] wlan1: failed to remove key (0, 54:60:09:fd:b0:72) from hardware (-5)
[ 777.324342] ieee80211 phy1: MACREG_REG_INT_CODE: 0×0000

kernel log in attachment

11.01.20213571KernelBug ReportVery LowCriticalKernel Drops Packets and causes heavy re-transmissionopenwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on - Netgear R6220
- Software versions of OpenWrt/LEDE release, packages, etc - OpenWrt 19.07.04 & 19.07.05, mt7621
- Steps to reproduce - No Specific steps to reproduce the problem. Problem automatically starts occurring after a few weeks of usage. Upon running tcpdump on the bridged lan interface where majority of my clients are connected, many packets were dropped by the Kernel which caused many re-transmissions.

root@OpenWrt:~# tcpdump -i br-lan -w /mnt/sda1/tcpdump/tcpdump.pcap
tcpdump: listening on br-lan, link-type EN10MB (Ethernet), capture size 262144 bytes

39397 packets received by filter
14785 packets dropped by kernel
root@OpenWrt:~#

During the tcpdump packet capture, all I tried doing was browse various web pages from one client and do a speedtest from another client. The web pages would either never load and load after several re-attempts. Speedtest would fail to complete and error out.

20.01.20213581KernelBug ReportVery LowCriticalUpload speed regression when connected 100Mbps Lan cabl...openwrt-19.07Unconfirmed Task Description

OpenWRT 19.07.6 And Trunk

When connected 100 Mbps cable into WAN port i have upload speed regression (Speedtest and iperf3)

Regression on 1 Gbs Lan, 2.4 and 5GHz clients. If i changed lan port on lan card to 100Mbs FD - no regression оn this client, but i see it on other 1Gbs lan cliens and wireless.

There is no upload speed regression when connected 1Gbs cable into Wan port. There is no probem on stock firmware

Rus.

Деградация скорости отдачи на проводных гигабитных клиентах и на Wifi ,если в Wan порт подключен 100 мегабитный кабель. Если на конкретном проводном клиенте переключить порт на 100 Мбит полный дуплекс-регрессия на нем пропадает, но сохраняется на Wifi.
Деградация скорости не наблюдается при подключении гигабитного кабеля в Wan порт. На стоке проблемы нет.


06.02.20213607ToolchainBug ReportVery LowCriticalfakeroot fails to build from source with glibc 2.33TrunkUnconfirmed Task Description

Some distributions (Arch, Fedora) ship glibc 2.33

tools/fakeroot will not compile / may not compile because

error: ‘_STAT_VER’ undeclared

and multiple other errors - Distros might patch /revert the change to glibc or fakeroot has to be patched

related fedora bugs:
https://bugzilla.redhat.com/show_bug.cgi?id=1901049 https://bugzilla.redhat.com/show_bug.cgi?id=1889862

quote from ticket: “fakeroot needs to be enhanced to intercept all new glibc interfaces. The build failure merely obscures the larger issues.”

This error is critical since fakeroot is a requirement by the build system and not optional

01.03.20213656Base systemBug ReportVery LowCriticalDGND3700 v2 - Boot loopopenwrt-19.07Unconfirmed Task Description

Boot

10.03.20213678Base systemBug ReportVery LowCriticalSlow and inconsistent WiFi downloads/uploads on WAC104(...TrunkUnconfirmed Task Description

- Device problem occurs on : Netgear WAC104 / MT7621
- Software versions of OpenWrt: observed on snapshots r16134-c6652a7c9 / r16134-c6652a7c94
- Steps to reproduce : connect any device to wlan0/1 whatever the settings and download/upload data


I ran a few tests between a desktop wired to the device and a laptop connected to it through WiFi. Both are the only hosts of this device, being used a “dumb AP”, with the same hostname for both wlan. The results are always pretty bad and/or inconsistent.

For example, the following are the results of two of these tests, run one after the other:

$ iperf3 -c 192.168.1.12 -t 60 -P 1
Connecting to host 192.168.1.12, port 5201
[  5] local 192.168.1.10 port 48796 connected to 192.168.1.12 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  12.2 MBytes   102 Mbits/sec   14    201 KBytes       
[  5]   1.00-2.00   sec  3.75 MBytes  31.5 Mbits/sec   27   32.5 KBytes       
[  5]   2.00-3.00   sec  0.00 Bytes  0.00 bits/sec   13   14.1 KBytes       
[  5]   3.00-4.00   sec  2.50 MBytes  21.0 Mbits/sec   11   8.48 KBytes       
[  5]   4.00-5.00   sec  0.00 Bytes  0.00 bits/sec   13   4.24 KBytes       
[  5]   5.00-6.00   sec  5.00 MBytes  42.0 Mbits/sec    9   21.2 KBytes       
[  5]   6.00-7.00   sec  1.25 MBytes  10.5 Mbits/sec   11   1.41 KBytes       
[  5]   7.00-8.00   sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]   8.00-9.00   sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]   9.00-10.00  sec  0.00 Bytes  0.00 bits/sec    1   1.00 KBytes       
[  5]  10.00-11.00  sec  0.00 Bytes  0.00 bits/sec    8   3.00 KBytes       
[  5]  11.00-12.00  sec  3.75 MBytes  31.5 Mbits/sec    2   94.3 KBytes       
[  5]  12.00-13.00  sec  7.50 MBytes  62.9 Mbits/sec    0    159 KBytes       
[  5]  13.00-14.00  sec  1.25 MBytes  10.5 Mbits/sec   21   15.5 KBytes       
[  5]  14.00-15.00  sec  2.50 MBytes  21.0 Mbits/sec   10   1.41 KBytes       
[  5]  15.00-16.00  sec  0.00 Bytes  0.00 bits/sec    7   1.41 KBytes       
[  5]  16.00-17.00  sec  3.75 MBytes  31.5 Mbits/sec    4   84.4 KBytes       
[  5]  17.00-18.00  sec  1.25 MBytes  10.5 Mbits/sec   12   1.41 KBytes       
[  5]  18.00-19.00  sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]  19.00-20.00  sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]  20.00-21.00  sec  0.00 Bytes  0.00 bits/sec    1    720 Bytes       
[  5]  21.00-22.00  sec  0.00 Bytes  0.00 bits/sec    0    720 Bytes       
[  5]  22.00-23.00  sec  0.00 Bytes  0.00 bits/sec    0    720 Bytes       
[  5]  23.00-24.00  sec  0.00 Bytes  0.00 bits/sec    0    720 Bytes       
[  5]  24.00-25.00  sec  1.25 MBytes  10.5 Mbits/sec   33   53.5 KBytes       
[  5]  25.00-26.00  sec  6.25 MBytes  52.4 Mbits/sec    0    128 KBytes       
[  5]  26.00-27.00  sec  5.00 MBytes  41.9 Mbits/sec   14   33.8 KBytes       
[  5]  27.00-28.00  sec  0.00 Bytes  0.00 bits/sec   10   1.41 KBytes       
[  5]  28.00-29.00  sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]  29.00-30.00  sec  3.75 MBytes  31.5 Mbits/sec    8   95.8 KBytes       
[  5]  30.00-31.00  sec  6.25 MBytes  52.4 Mbits/sec    6   36.6 KBytes       
[  5]  31.00-32.00  sec  2.50 MBytes  21.0 Mbits/sec   28   7.05 KBytes       
[  5]  32.00-33.00  sec  2.50 MBytes  21.0 Mbits/sec   14   7.05 KBytes       
[  5]  33.00-34.00  sec  0.00 Bytes  0.00 bits/sec    2   1.41 KBytes       
[  5]  34.00-35.00  sec  1.25 MBytes  10.5 Mbits/sec    5   19.7 KBytes       
[  5]  35.00-36.00  sec  6.25 MBytes  52.4 Mbits/sec    0    120 KBytes       
[  5]  36.00-37.00  sec  2.50 MBytes  21.0 Mbits/sec   10   1.41 KBytes       
[  5]  37.00-38.00  sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]  38.00-39.00  sec  3.75 MBytes  31.5 Mbits/sec    6   90.2 KBytes       
[  5]  39.00-40.00  sec  6.25 MBytes  52.4 Mbits/sec    0    148 KBytes       
[  5]  40.00-41.00  sec  6.25 MBytes  52.4 Mbits/sec    0    190 KBytes       
[  5]  41.00-42.00  sec  6.25 MBytes  52.4 Mbits/sec    0    249 KBytes       
[  5]  42.00-43.00  sec  5.00 MBytes  41.9 Mbits/sec    2    156 KBytes       
[  5]  43.00-44.00  sec  7.50 MBytes  62.9 Mbits/sec    0    203 KBytes       
[  5]  44.00-45.00  sec  6.25 MBytes  52.4 Mbits/sec    2    152 KBytes       
[  5]  45.00-46.00  sec  7.50 MBytes  62.9 Mbits/sec    0    196 KBytes       
[  5]  46.00-47.00  sec  6.25 MBytes  52.4 Mbits/sec    0    228 KBytes       
[  5]  47.00-48.00  sec  5.00 MBytes  41.9 Mbits/sec   78    140 KBytes       
[  5]  48.00-49.00  sec  5.00 MBytes  41.9 Mbits/sec    0    173 KBytes       
[  5]  49.00-50.00  sec  0.00 Bytes  0.00 bits/sec    2   1.41 KBytes       
[  5]  50.00-51.00  sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]  51.00-52.00  sec  0.00 Bytes  0.00 bits/sec    0   1.41 KBytes       
[  5]  52.00-53.00  sec  10.0 MBytes  84.0 Mbits/sec  172    163 KBytes       
[  5]  53.00-54.00  sec  22.5 MBytes   189 Mbits/sec    0    276 KBytes       
[  5]  54.00-55.00  sec  21.2 MBytes   178 Mbits/sec    2    246 KBytes       
[  5]  55.00-56.00  sec  22.5 MBytes   189 Mbits/sec    2    221 KBytes       
[  5]  56.00-57.00  sec  22.5 MBytes   189 Mbits/sec    0    313 KBytes       
[  5]  57.00-58.00  sec  22.5 MBytes   189 Mbits/sec    0    386 KBytes       
[  5]  58.00-59.00  sec  25.0 MBytes   210 Mbits/sec    2    239 KBytes       
[  5]  59.00-60.00  sec  21.2 MBytes   178 Mbits/sec    2    189 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-60.00  sec   315 MBytes  44.0 Mbits/sec  571             sender
[  5]   0.00-60.00  sec   308 MBytes  43.0 Mbits/sec                  receiver

iperf Done.
$ iperf3 -c 192.168.1.12 -t 60 -P 1
Connecting to host 192.168.1.12, port 5201
[  5] local 192.168.1.10 port 48912 connected to 192.168.1.12 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  44.8 MBytes   376 Mbits/sec   10    723 KBytes       
[  5]   1.00-2.00   sec  22.5 MBytes   189 Mbits/sec   65    110 KBytes       
[  5]   2.00-3.00   sec  20.0 MBytes   168 Mbits/sec    0    236 KBytes       
[  5]   3.00-4.00   sec  21.2 MBytes   178 Mbits/sec    1    243 KBytes       
[  5]   4.00-5.00   sec  21.2 MBytes   178 Mbits/sec    2    211 KBytes       
[  5]   5.00-6.00   sec  20.0 MBytes   168 Mbits/sec    0    291 KBytes       
[  5]   6.00-7.00   sec  21.2 MBytes   178 Mbits/sec    3    148 KBytes       
[  5]   7.00-8.00   sec  20.0 MBytes   168 Mbits/sec    1    194 KBytes       
[  5]   8.00-9.00   sec  22.5 MBytes   189 Mbits/sec    2    156 KBytes       
[  5]   9.00-10.00  sec  20.0 MBytes   168 Mbits/sec    2    197 KBytes       
[  5]  10.00-11.00  sec  20.0 MBytes   168 Mbits/sec    2    192 KBytes       
[  5]  11.00-12.00  sec  21.2 MBytes   178 Mbits/sec    1    173 KBytes       
[  5]  12.00-13.00  sec  21.2 MBytes   178 Mbits/sec    2    173 KBytes       
[  5]  13.00-14.00  sec  23.8 MBytes   199 Mbits/sec    0    288 KBytes       
[  5]  14.00-15.00  sec  26.2 MBytes   220 Mbits/sec    2    188 KBytes       
[  5]  15.00-16.00  sec  21.2 MBytes   178 Mbits/sec    0    286 KBytes       
[  5]  16.00-17.00  sec  22.5 MBytes   189 Mbits/sec    1    257 KBytes       
[  5]  17.00-18.00  sec  20.0 MBytes   168 Mbits/sec    3    195 KBytes       
[  5]  18.00-19.00  sec  26.2 MBytes   220 Mbits/sec    0    308 KBytes       
[  5]  19.00-20.00  sec  26.2 MBytes   220 Mbits/sec    0    395 KBytes       
[  5]  20.00-21.00  sec  23.8 MBytes   199 Mbits/sec    5    163 KBytes       
[  5]  21.00-22.00  sec  22.5 MBytes   189 Mbits/sec    2    116 KBytes       
[  5]  22.00-23.00  sec  22.5 MBytes   189 Mbits/sec    0    252 KBytes       
[  5]  23.00-24.00  sec  22.5 MBytes   189 Mbits/sec   26    256 KBytes       
[  5]  24.00-25.00  sec  23.8 MBytes   199 Mbits/sec    3    230 KBytes       
[  5]  25.00-26.00  sec  22.5 MBytes   189 Mbits/sec    1    197 KBytes       
[  5]  26.00-27.00  sec  23.8 MBytes   199 Mbits/sec    2    235 KBytes       
[  5]  27.00-28.00  sec  22.5 MBytes   189 Mbits/sec    4    127 KBytes       
[  5]  28.00-29.00  sec  22.5 MBytes   189 Mbits/sec    0    259 KBytes       
[  5]  29.00-30.00  sec  25.0 MBytes   210 Mbits/sec    1    252 KBytes       
[  5]  30.00-31.00  sec  22.5 MBytes   189 Mbits/sec    2    245 KBytes       
[  5]  31.00-32.00  sec  23.8 MBytes   199 Mbits/sec    3    225 KBytes       
[  5]  32.00-33.00  sec  23.8 MBytes   199 Mbits/sec    0    321 KBytes       
[  5]  33.00-34.00  sec  22.5 MBytes   189 Mbits/sec    2    257 KBytes       
[  5]  34.00-35.00  sec  23.8 MBytes   199 Mbits/sec    2    191 KBytes       
[  5]  35.00-36.00  sec  20.0 MBytes   168 Mbits/sec    3    112 KBytes       
[  5]  36.00-37.00  sec  22.5 MBytes   189 Mbits/sec    2    124 KBytes       
[  5]  37.00-38.00  sec  22.5 MBytes   189 Mbits/sec    0    259 KBytes       
[  5]  38.00-39.00  sec  23.8 MBytes   199 Mbits/sec    4    219 KBytes       
[  5]  39.00-40.00  sec  20.0 MBytes   168 Mbits/sec    1    232 KBytes       
[  5]  40.00-41.00  sec  21.2 MBytes   178 Mbits/sec    4    163 KBytes       
[  5]  41.00-42.00  sec  21.2 MBytes   178 Mbits/sec    4   94.7 KBytes       
[  5]  42.00-43.00  sec  21.2 MBytes   178 Mbits/sec    0    232 KBytes       
[  5]  43.00-44.00  sec  22.5 MBytes   189 Mbits/sec    1    246 KBytes       
[  5]  44.00-45.00  sec  22.5 MBytes   189 Mbits/sec    2    198 KBytes       
[  5]  45.00-46.00  sec  21.2 MBytes   178 Mbits/sec    2    185 KBytes       
[  5]  46.00-47.00  sec  22.5 MBytes   189 Mbits/sec    0    290 KBytes       
[  5]  47.00-48.00  sec  18.8 MBytes   157 Mbits/sec    5    187 KBytes       
[  5]  48.00-49.00  sec  20.0 MBytes   168 Mbits/sec    2    184 KBytes       
[  5]  49.00-50.00  sec  20.0 MBytes   168 Mbits/sec    2    204 KBytes       
[  5]  50.00-51.00  sec  21.2 MBytes   178 Mbits/sec    0    301 KBytes       
[  5]  51.00-52.00  sec  21.2 MBytes   178 Mbits/sec    3    180 KBytes       
[  5]  52.00-53.00  sec  18.8 MBytes   157 Mbits/sec    8    144 KBytes       
[  5]  53.00-54.00  sec  20.0 MBytes   168 Mbits/sec    1    141 KBytes       
[  5]  54.00-55.00  sec  21.2 MBytes   178 Mbits/sec    2    168 KBytes       
[  5]  55.00-56.00  sec  20.0 MBytes   168 Mbits/sec    2    153 KBytes       
[  5]  56.00-57.00  sec  21.2 MBytes   178 Mbits/sec    0    259 KBytes       
[  5]  57.00-58.00  sec  18.8 MBytes   157 Mbits/sec   11    222 KBytes       
[  5]  58.00-59.00  sec  18.8 MBytes   157 Mbits/sec    1    228 KBytes       
[  5]  59.00-60.00  sec  22.5 MBytes   189 Mbits/sec    5    174 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-60.00  sec  1.30 GBytes   186 Mbits/sec  215             sender
[  5]   0.00-60.00  sec  1.28 GBytes   183 Mbits/sec                  receiver

iperf Done.

Linux kernel buffer output:

root@wac104:~# dmesg
[    0.000000] Linux version 5.4.102 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16134-c6652a7c94)) #0 SMP Sat Mar 6 19:23:48 2021
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Netgear WAC104
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2} total 2
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000]   Normal zone: 288 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] percpu: Embedded 14 pages/cpu s26768 r8192 d22384 u57344
[    0.000000] pcpu-alloc: s26768 r8192 d22384 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Writing ErrCtl register=00020821
[    0.000000] Readback ErrCtl register=00020821
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 120568K/131072K available (6069K kernel code, 205K rwdata, 1292K rodata, 1252K init, 238K bss, 10504K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 256
[    0.000000] random: get_random_bytes called from start_kernel+0x340/0x558 with crng_init=0
[    0.000000] CPU Clock: 880MHz
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000008] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.015485] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
[    0.055787] pid_max: default: 32768 minimum: 301
[    0.065110] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.079507] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.097237] rcu: Hierarchical SRCU implementation.
[    0.107168] smp: Bringing up secondary CPUs ...
[    8.468259] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    8.468268] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    8.468280] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    8.468379] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.144226] Synchronize counters for CPU 1: done.
[    0.203863] smp: Brought up 1 node, 2 CPUs
[    0.216000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.235283] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.248893] pinctrl core: initialized pinctrl subsystem
[    0.260578] NET: Registered protocol family 16
[    0.282226] FPU Affinity set after 4688 emulations
[    0.302292] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    0.323331] clocksource: Switched to clocksource GIC
[    0.334983] NET: Registered protocol family 2
[    0.344920] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.361626] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.376749] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.390741] TCP: Hash tables configured (established 1024 bind 1024)
[    0.403493] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.416382] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.430471] NET: Registered protocol family 1
[    0.439033] PCI: CLS 0 bytes, default 32
[    0.539237] 4 CPUs re-calibrate udelay(lpj = 1163264)
[    0.550861] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[    0.576661] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.588203] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.609861] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.626695] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.638093] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.649403] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.661273] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.677969] printk: console [ttyS0] disabled
[    0.686413] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 15, base_baud = 3125000) is a 16550A
[    0.704353] printk: console [ttyS0] enabled
[    0.720899] printk: bootconsole [early0] disabled
[    0.742962] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388
[    0.757928] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[    0.770591] nand: Macronix MX30LF1G18AC
[    0.778236] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.793324] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
[    0.806362] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[    0.820930] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[    0.835495] Scanning device for bad blocks
[    0.929285] Bad eraseblock 67 at 0x000000860000
[    0.979556] Bad eraseblock 100 at 0x000000c80000
[    1.090848] Bad eraseblock 181 at 0x0000016a0000
[    1.152689] Bad eraseblock 223 at 0x000001be0000
[    2.033868] Bad eraseblock 911 at 0x0000071e0000
[    2.185200] 6 fixed-partitions partitions found on MTD device mt7621-nand
[    2.198719] Creating 6 MTD partitions on "mt7621-nand":
[    2.209139] 0x000000000000-0x000000100000 : "u-boot"
[    2.220628] 0x000000100000-0x000000200000 : "SC PID"
[    2.232144] 0x000000200000-0x000000600000 : "kernel"
[    2.243590] 0x000000600000-0x000002200000 : "ubi"
[    2.254608] 0x000002e00000-0x000002f00000 : "factory"
[    2.266193] 0x000004200000-0x000007e00000 : "reserved"
[    2.279491] libphy: Fixed MDIO Bus: probed
[    2.313633] libphy: mdio: probed
[    2.320337] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.336647] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 16
[    2.355482] mt7621-pci 1e140000.pcie: Parsing DT failed
[    2.369012] NET: Registered protocol family 10
[    2.379392] Segment Routing with IPv6
[    2.386832] NET: Registered protocol family 17
[    2.395766] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.421838] 8021q: 802.1Q VLAN Support v1.8
[    2.432285] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.454738] libphy: dsa slave smi: probed
[    2.463178] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
[    2.481234] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
[    2.499279] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
[    2.517288] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
[    2.535604] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
[    2.553221] DSA: tree 0 setup
[    2.559529] rt2880-pinmux pinctrl: pcie is already enabled
[    2.570481] mt7621-pci 1e140000.pcie: Error applying setting, reverse things back
[    2.585545] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
[    2.600470] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
[    2.715025] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
[    2.726143] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
[    2.836992] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK)
[    2.850865] mt7621-pci 1e140000.pcie: PCIE0 enabled
[    2.860586] mt7621-pci 1e140000.pcie: PCIE2 enabled
[    2.870309] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    2.889040] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[    2.901725] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
[    2.915431] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    2.929132] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.940112] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    2.952113] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.964607] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    2.977165] pci 0000:00:00.0: supports D1
[    2.985155] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.997017] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    3.009033] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    3.021528] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    3.034079] pci 0000:00:01.0: supports D1
[    3.042076] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    3.054863] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.070834] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.087008] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[    3.099041] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    3.112611] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    3.126065] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    3.139612] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    3.150034] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    3.162179] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    3.175711] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    3.190107] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    3.203513] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
[    3.215542] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    3.228169] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    3.241660] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[    3.252095] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
[    3.264239] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff]
[    3.277767] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    3.292166] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    3.305403] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    3.318584] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    3.332463] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    3.345649] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    3.359528] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    3.373059] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[    3.387456] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[    3.400987] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[    3.415384] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
[    3.428920] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
[    3.442452] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
[    3.455991] pci 0000:00:01.0: BAR 7: assigned [io  0x1e161000-0x1e161fff]
[    3.469532] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[    3.484114] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[    3.498506] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.508406] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
[    3.521934] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    3.535466] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    3.549866] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
[    3.563405] pci 0000:00:01.0: PCI bridge to [bus 02]
[    3.573298] pci 0000:00:01.0:   bridge window [io  0x1e161000-0x1e161fff]
[    3.586825] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    3.600356] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[    3.615348] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
[    3.630162] UBI: auto-attach mtd3
[    3.636847] ubi0: attaching mtd3
[    3.923256] ubi0: scanning is finished
[    3.947133] ubi0: attached mtd3 (name "ubi", size 28 MiB)
[    3.957945] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    3.971649] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    3.985172] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    3.999042] ubi0: good PEBs: 220, bad PEBs: 4, corrupted PEBs: 0
[    4.011009] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    4.025402] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1609112511
[    4.043604] ubi0: available PEBs: 0, total reserved PEBs: 220, PEBs reserved for bad PEB handling: 16
[    4.061998] ubi0: background thread "ubi_bgt0d" started, PID 454
[    4.069210] block ubiblock0_0: created from ubi0:0(rootfs)
[    4.084951] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    4.098837] hctosys: unable to open rtc device (rtc0)
[    4.116176] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
[    4.134557] Freeing unused kernel memory: 1252K
[    4.143636] This architecture does not have kernel memory protection.
[    4.156463] Run /sbin/init as init process
[    4.199120] random: fast init done
[    4.629448] init: Console is alive
[    4.636476] init: - watchdog -
[    5.412397] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.513635] usbcore: registered new interface driver usbfs
[    5.524733] usbcore: registered new interface driver hub
[    5.535460] usbcore: registered new device driver usb
[    5.560661] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.579634] init: - preinit -
[    6.335071] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[    6.351194] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    6.368572] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.554386] random: jshn: uninitialized urandom read (4 bytes read)
[    6.672703] random: jshn: uninitialized urandom read (4 bytes read)
[    6.707476] random: jshn: uninitialized urandom read (4 bytes read)
[    6.911188] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[    6.924828] 8021q: adding VLAN 0 to HW filter on device lan1
[   11.164263] UBIFS (ubi0:1): Mounting in unauthenticated mode
[   11.175788] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 578
[   11.259271] UBIFS (ubi0:1): recovery needed
[   11.453234] UBIFS (ubi0:1): recovery completed
[   11.462234] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   11.477831] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   11.497576] UBIFS (ubi0:1): FS size: 21078016 bytes (20 MiB, 166 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
[   11.518183] UBIFS (ubi0:1): reserved for root: 995566 bytes (972 KiB)
[   11.531019] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID C6A4037D-B0B0-4663-BD6C-9AFF40588098, small LPT model
[   11.569131] mount_root: switching to ubifs overlay
[   11.595957] urandom-seed: Seeding with /etc/urandom.seed
[   11.765833] procd: - early -
[   11.771721] procd: - watchdog -
[   12.379375] procd: - watchdog -
[   12.388342] procd: - ubus -
[   12.459882] procd: - init -
[   13.169190] kmodloader: loading kernel modules from /etc/modules.d/*
[   13.232256] Loading modules backported from Linux version v5.10.16-0-gde53befa79cf
[   13.247377] Backport generated by backports.git v5.10.16-1-0-g21d2a1d2
[   13.318238] xt_time: kernel timezone is -0000
[   13.377596] urngd: v1.0.2 started.
[   13.484346] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=20
[   13.495178] pci 0000:00:01.0: enabling device (0004 -> 0007)
[   13.506506] mt7603e 0000:02:00.0: enabling device (0000 -> 0002)
[   13.518705] mt7603e 0000:02:00.0: ASIC revision: 76030010
[   13.576328] random: crng init done
[   13.583135] random: 7 urandom warning(s) missed due to ratelimiting
[   14.148696] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
[   14.159867] mt7603e 0000:02:00.0: Build Time: 20160107100755
[   14.195266] mt7603e 0000:02:00.0: firmware init done
[   14.382380] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.465260] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=18
[   14.476152] pci 0000:00:00.0: enabling device (0004 -> 0007)
[   14.487463] mt76x2e 0000:01:00.0: enabling device (0000 -> 0002)
[   14.499716] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[   15.100161] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
[   15.118144] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[   15.129140] mt76x2e 0000:01:00.0: Build: 1
[   15.137412] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[   15.163402] mt76x2e 0000:01:00.0: Firmware running!
[   15.175128] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   15.211983] PPP generic driver version 2.4.2
[   15.222213] NET: Registered protocol family 24
[   15.258953] kmodloader: done loading kernel modules from /etc/modules.d/*
[   22.713658] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[   22.741566] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[   22.759129] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   22.766735] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[   22.789706] 8021q: adding VLAN 0 to HW filter on device lan1
[   22.804591] br-lan: port 1(lan1) entered blocking state
[   22.815149] br-lan: port 1(lan1) entered disabled state
[   22.835482] device lan1 entered promiscuous mode
[   22.844838] device eth0 entered promiscuous mode
[   22.859793] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.885938] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[   22.900198] 8021q: adding VLAN 0 to HW filter on device lan2
[   22.922694] br-lan: port 2(lan2) entered blocking state
[   22.933241] br-lan: port 2(lan2) entered disabled state
[   22.946267] device lan2 entered promiscuous mode
[   22.966512] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[   22.999138] 8021q: adding VLAN 0 to HW filter on device lan3
[   23.017738] br-lan: port 3(lan3) entered blocking state
[   23.028367] br-lan: port 3(lan3) entered disabled state
[   23.083123] device lan3 entered promiscuous mode
[   23.104261] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[   23.120338] 8021q: adding VLAN 0 to HW filter on device lan4
[   23.135141] br-lan: port 4(lan4) entered blocking state
[   23.145722] br-lan: port 4(lan4) entered disabled state
[   23.157970] device lan4 entered promiscuous mode
[   25.016009] br-lan: port 5(wlan0) entered blocking state
[   25.026756] br-lan: port 5(wlan0) entered disabled state
[   25.037963] device wlan0 entered promiscuous mode
[   25.715599] br-lan: port 6(wlan1) entered blocking state
[   25.726273] br-lan: port 6(wlan1) entered disabled state
[   25.737570] device wlan1 entered promiscuous mode
[   25.747433] br-lan: port 6(wlan1) entered blocking state
[   25.758073] br-lan: port 6(wlan1) entered listening state
[   26.011551] br-lan: port 6(wlan1) entered disabled state
[   27.099911] mt7530 mdio-bus:1f lan3: Link is Up - 1Gbps/Full - flow control rx/tx
[   27.115201] br-lan: port 3(lan3) entered blocking state
[   27.125766] br-lan: port 3(lan3) entered listening state
[   29.275253] br-lan: port 3(lan3) entered learning state
[   31.153066] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   31.166104] br-lan: port 6(wlan1) entered blocking state
[   31.176790] br-lan: port 6(wlan1) entered listening state
[   31.291260] br-lan: port 3(lan3) entered forwarding state
[   31.302029] br-lan: topology change detected, propagating
[   31.313602] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   31.669584] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   31.682780] br-lan: port 5(wlan0) entered blocking state
[   31.693472] br-lan: port 5(wlan0) entered listening state
[   33.371270] br-lan: port 6(wlan1) entered learning state
[   33.883254] br-lan: port 5(wlan0) entered learning state
[   35.387259] br-lan: port 6(wlan1) entered forwarding state
[   35.398200] br-lan: topology change detected, propagating
[   35.899252] br-lan: port 5(wlan0) entered forwarding state
[   35.910185] br-lan: topology change detected, propagating
[   97.659766] mt7530 mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[   97.674752] br-lan: port 2(lan2) entered blocking state
[   97.685231] br-lan: port 2(lan2) entered listening state
[   99.931274] br-lan: port 2(lan2) entered learning state
[  101.947282] br-lan: port 2(lan2) entered forwarding state
root@wac104:~# uname -a
Linux wac104 5.4.102 #0 SMP Sat Mar 6 19:23:48 2021 mips GNU/Linux
root@wac104:~# cat /proc/cpuinfo 
system type		: MediaTek MT7621 ver:1 eco:3
machine			: Netgear WAC104
processor		: 0
cpu model		: MIPS 1004Kc V2.15
BogoMIPS		: 581.63
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 32
extra interrupt vector	: yes
hardware watchpoint	: yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa			: mips1 mips2 mips32r1 mips32r2
ASEs implemented	: mips16 dsp mt
Options implemented	: tlb 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit cdmm perf
shadow register sets	: 1
kscratch registers	: 0
package			: 0
core			: 0
VPE			: 0
VCED exceptions		: not available
VCEI exceptions		: not available

processor		: 1
cpu model		: MIPS 1004Kc V2.15
BogoMIPS		: 581.63
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 32
extra interrupt vector	: yes
hardware watchpoint	: yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa			: mips1 mips2 mips32r1 mips32r2
ASEs implemented	: mips16 dsp mt
Options implemented	: tlb 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit cdmm perf
shadow register sets	: 1
kscratch registers	: 0
package			: 0
core			: 0
VPE			: 1
VCED exceptions		: not available
VCEI exceptions		: not available

I just hope I did not forget any relevant details. The testing I made was more thorough but I did not really what would be more relevant to you. Please let me know if you need more details or if my bug report approach is not relevant enough to see the problem.

16.03.20213686Base systemBug ReportVery LowCriticalBelkin F9K1115 v2 - boot loop with 21.02 snapshotopenwrt-21.02Unconfirmed Task Description

Boot loop, no communication with the router after upgrade to 21.02 snapshot (tested r15866).

Upgrade from Belkin web UI (factory image) is not working.

Probably migration to the new ath79 architecture is not correct:
- https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=563ece8a85dad24e8c3ce55af51938a4d37405f0 - https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=b403a6e1241c00f509b201ec2ac8ca5f29e1ffd1

27.03.20213707KernelBug ReportVery LowCriticalx86_64: linux 5.10 cannot build objtoolTrunkUnconfirmed Task Description

Just use testing kernel version 5.10 on x86_64, run `make menuconfig` and `make V=sc`

Error log:

gcc -Wp,-MD,/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/.builtin-check.o.d -Wp,-MT,/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/builtin-check.o -Werror -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wstrict-aliasing=3 -Wshadow -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89 -O2 -I/home/wong/github/lede-1/staging_dir/host/include -Wall -Wmissing-prototypes -Wstrict-prototypes -g -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/include -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/arch/x86/include/uapi -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/arch/x86/include -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/arch/x86/include -I/home/wong/github/lede-1/staging_dir/host/include/libelf -I/home/wong/github/lede-1/staging_dir/host/include -DINSN_USE_ORC -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/lib -D"BUILD_STR(s)=#s" -c -o /home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/builtin-check.o builtin-check.c
gcc -Wp,-MD,/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/.builtin-orc.o.d -Wp,-MT,/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/builtin-orc.o -Werror -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wstrict-aliasing=3 -Wshadow -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89 -O2 -I/home/wong/github/lede-1/staging_dir/host/include -Wall -Wmissing-prototypes -Wstrict-prototypes -g -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/include -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/arch/x86/include/uapi -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/arch/x86/include -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/arch/x86/include -I/home/wong/github/lede-1/staging_dir/host/include/libelf -I/home/wong/github/lede-1/staging_dir/host/include -DINSN_USE_ORC -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/lib -D"BUILD_STR(s)=#s" -c -o /home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/builtin-orc.o builtin-orc.c
gcc -Wp,-MD,/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/.elf.o.d -Wp,-MT,/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/elf.o -Werror -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wstrict-aliasing=3 -Wshadow -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89 -O2 -I/home/wong/github/lede-1/staging_dir/host/include -Wall -Wmissing-prototypes -Wstrict-prototypes -g -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/include -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/arch/x86/include/uapi -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/arch/x86/include -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/arch/x86/include -I/home/wong/github/lede-1/staging_dir/host/include/libelf -I/home/wong/github/lede-1/staging_dir/host/include -DINSN_USE_ORC -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/lib -D"BUILD_STR(s)=#s" -c -o /home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/elf.o elf.c

elf.c: In function ‘read_symbols’:
elf.c:407:8: error: implicit declaration of function ‘gelf_getsymshndx’; did you mean ‘gelf_getsym’? [-Werror=implicit-function-declaration]

407 |   if (!gelf_getsymshndx(symtab->data, shndx_data, i, &sym->sym,
    |        ^~~~~~~~~~~~~~~~
    |        gelf_getsym

cc1: all warnings being treated as errors
make[8]: * [/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/build/Makefile.build:97: /home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/elf.o] Error 1
make[7]:
* [Makefile:59: /home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/objtool-in.o] Error 2
make[6]: * [Makefile:68: objtool] Error 2
make[5]:
* [Makefile:1935: tools/objtool] Error 2
make[5]: Leaving directory ‘/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26’ make[4]: * [Makefile:23: /home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/.modules] Error 2
make[4]: Leaving directory ‘/home/wong/github/lede-1/target/linux/x86’ make[3]:
* [Makefile:11: compile] Error 2
make[3]: Leaving directory ‘/home/wong/github/lede-1/target/linux’ time: target/linux/compile#32.74#16.77#48.92

  ERROR: target/linux failed to build.
 


01.04.20213717KernelBug ReportVery LowCriticalWRT1900ACS LAN Switch speed on kernel 5.4TrunkUnconfirmed Task Description

Dear, I ‘ve found an issue with DSA and kernel 5.4.
I’m on 21.02 SNAPSHOT.
My upload speed on WAN is only 10 mbps when a device with LAN connection is linked to 10mbps.
When a device 100mbps is connected to switch all speed is 100mbps not 1 gbps
It seems that the upload speed follow the lowest lan speed...

First test is with 10mbps connection on LAN3. –> Test was done from LAN1 to router.
Second test is with a LAN2 device conneted with 100mbps. –> Test was done from LAN1 to router

PS C:\Users\Andrea\Downloads\iperf-3.1.3-win64> .\iperf3.exe -c 192.168.181.1
Connecting to host 192.168.181.1, port 5201
[  4] local 192.168.181.159 port 50593 connected to 192.168.181.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.01   sec   384 KBytes  3.12 Mbits/sec
[  4]   1.01-2.01   sec   640 KBytes  5.26 Mbits/sec
[  4]   2.01-3.01   sec  1.12 MBytes  9.35 Mbits/sec
[  4]   3.01-4.01   sec  1.12 MBytes  9.52 Mbits/sec
[  4]   4.01-5.01   sec  1.12 MBytes  9.41 Mbits/sec
[  4]   5.01-6.00   sec  1.12 MBytes  9.50 Mbits/sec
[  4]   6.00-7.00   sec  1.12 MBytes  9.46 Mbits/sec
[  4]   7.00-8.00   sec  1.12 MBytes  9.41 Mbits/sec
[  4]   8.00-9.01   sec  1.12 MBytes  9.40 Mbits/sec
[  4]   9.01-10.01  sec  1.12 MBytes  9.44 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.01  sec  10.0 MBytes  8.38 Mbits/sec                  sender
[  4]   0.00-10.01  sec  9.81 MBytes  8.23 Mbits/sec                  receiver

iperf Done.
PS C:\Users\Andrea\Downloads\iperf-3.1.3-win64> .\iperf3.exe -c 192.168.181.1 -R
Connecting to host 192.168.181.1, port 5201
Reverse mode, remote host 192.168.181.1 is sending
[  4] local 192.168.181.159 port 50611 connected to 192.168.181.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  95.6 MBytes   802 Mbits/sec
[  4]   1.00-2.00   sec  97.9 MBytes   821 Mbits/sec
[  4]   2.00-3.00   sec   101 MBytes   847 Mbits/sec
[  4]   3.00-4.00   sec   101 MBytes   850 Mbits/sec
[  4]   4.00-5.00   sec   105 MBytes   884 Mbits/sec
[  4]   5.00-6.00   sec  92.3 MBytes   774 Mbits/sec
[  4]   6.00-7.00   sec   105 MBytes   877 Mbits/sec
[  4]   7.00-8.00   sec   102 MBytes   849 Mbits/sec
[  4]   8.00-9.00   sec  99.4 MBytes   836 Mbits/sec
[  4]   9.00-10.00  sec   107 MBytes   894 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec  1006 MBytes   844 Mbits/sec   23             sender
[  4]   0.00-10.00  sec  1006 MBytes   844 Mbits/sec                  receiver

This new test is with latest 19.07 (previous kernel no dsa)

BusyBox v1.30.1 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt 19.07-SNAPSHOT, r11328-81266d9001
 -----------------------------------------------------
root@WRT1900ACS:~# iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.181.159, port 48454
[  5] local 192.168.181.1 port 5201 connected to 192.168.181.159 port 48456
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec   108 MBytes   905 Mbits/sec                  
[  5]   1.00-2.00   sec   109 MBytes   915 Mbits/sec                  
[  5]   2.00-3.00   sec   109 MBytes   914 Mbits/sec                  
[  5]   3.00-4.00   sec   107 MBytes   900 Mbits/sec                  
[  5]   4.00-5.00   sec   108 MBytes   907 Mbits/sec                  
[  5]   5.00-6.00   sec   109 MBytes   912 Mbits/sec                  
[  5]   6.00-7.00   sec   107 MBytes   896 Mbits/sec                  
[  5]   7.00-8.00   sec   109 MBytes   917 Mbits/sec                  
[  5]   8.00-9.00   sec   108 MBytes   905 Mbits/sec                  
[  5]   9.00-10.00  sec   108 MBytes   903 Mbits/sec                  
[  5]  10.00-10.00  sec   293 KBytes   892 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.00  sec  1.06 GBytes   907 Mbits/sec 

I also noticed that with the latest version the switch LEDs flash all together and not only follow where there is communication, but I don’t think this is a problem.

Is this speed issue a bug or I do something wrong? I don’t make any changes to network config from standard. Only changed IP from 192.168.1.1 to 192.168.181.1.

24.04.20213751Base systemBug ReportVery LowCriticalTP-Link CPE510 V3.20 EU snapshot build brokenopenwrt-19.07Unconfirmed Task Description

Openwrt firmware does not work for this device as posted on openwrt wiki. After install it just stuck on boot with the power led on, nothing else, no ssh access, only boot loop. Latest working build I found is snapshot from January 21. 2021.

29.04.20213760Base systemBug ReportVery LowCriticalWifi to WAN traffic causes eth0 to crash with a NETDEV ...openwrt-21.02Unconfirmed Task Description

I have been testing OpenWRT 21.02-RC1 stock released firmware image on the Newifi-D2 target (MT7621 based).

Sporadically while using the router, i experience the WAN interface crashing with NETDEV WATCHDOG errors.

I am using the released image for OpenWrt 21.02-rc1 for the Newifi-D2 target
I have also experienced this fault with a custom router build based on MT7621 for a different target, the fault appears general to MT7621 not this target.

I have loaded 19.07.7 stock firmware on this same hardware and the fault does not occur in that firmware version. A colleague has replicated this fault in 21.02-RC1 with the same type of target (physically different unit), but in a different environment with no shared network resources.

Other than setting up the wifi ssid and password and enabling the 5ghz radio, the network settings are stock.

I have worked out a 90% reliable test case to reproduce the fault:

Have a client device connected to the router on WiFi 5ghz
And a local Iperf3 server running on the wan side of the wired interface.

On the server run:

iperf3 -s

Note the servers IP address

On the client run:

iperf3 -c <serverIP> -P 50

Notes:
Iperf3 server needs to be local on a 1gbps wired link. With an internet based Iperf3 server (or one with a slower connection) the error is much harder to trigger, it will happen but its much more random.
The number of connections does not need to be 50, however, the lower the number of connections the less reliable the error triggers.
The WiFi client should be getting about 300-400mbps throughput over the wifi link when its working correctly.

On most runs, the iperf3 performance will drop to 0mbps, logread on the router then reveals:

Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.065748] ------------[ cut here ]------------
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.070403] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:448 0x8047e780
Thu Apr 29 03:58:44 2021 kern.info kernel: [  578.077443] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.084412] Modules linked in: pppoe ppp_async iptable_nat xt_state xt_nat xt_conntrack xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD xt_CT pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG slhc nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.147503] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.4.111 #0
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.153490] Stack : 00000000 80840000 ffffffff 8007d6e0 00000000 00000000 00000000 00000000
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.161831]         00000000 00000000 00000000 00000000 00000000 00000001 8fc0fd50 8ba64c1c
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.170163]         8fc0fde8 00000000 00000000 00000000 00000038 805e1804 342e3520 3131312e
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.178486]         00000000 0000001c 00000000 0002402f 00000000 8fc0fd30 00000000 8047e780
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.186808]         00000009 00000001 00200000 00000122 00000003 80359e2c 00000004 80810004
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.195132]         ...
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.197567] Call Trace:
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.197583] [<8007d6e0>] 0x8007d6e0
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.203512] [<805e1804>] 0x805e1804
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.206990] [<8047e780>] 0x8047e780
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.210464] [<80359e2c>] 0x80359e2c
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.213941] [<8000b05c>] 0x8000b05c
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.217409] [<8000b064>] 0x8000b064
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.220879] [<805c6f9c>] 0x805c6f9c
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.224351] [<8007d8ac>] 0x8007d8ac
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.227829] [<8002bfe8>] 0x8002bfe8
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.231302] [<8047e780>] 0x8047e780
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.234775] [<8002c0c0>] 0x8002c0c0
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.238257] [<8047e780>] 0x8047e780
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.241731] [<800a9018>] 0x800a9018
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.245212] [<8047e484>] 0x8047e484
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.248688] [<800965d4>] 0x800965d4
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.252161] [<8009681c>] 0x8009681c
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.255640] [<805e7d1c>] 0x805e7d1c
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.259116] [<80030768>] 0x80030768
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.262588] [<802f8404>] 0x802f8404
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.266064] [<80006c28>] 0x80006c28
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.269533]
Thu Apr 29 03:58:44 2021 kern.warn kernel: [  578.271153] ---[ end trace eabfb050c5985bce ]---
Thu Apr 29 03:58:44 2021 kern.err kernel: [  578.275799] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
Thu Apr 29 03:58:44 2021 kern.info kernel: [  578.282602] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
Thu Apr 29 03:58:44 2021 kern.info kernel: [  578.318310] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
Thu Apr 29 03:58:44 2021 kern.info kernel: [  578.326251] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

This only occurs on the first instance of the error, the error will repeatedly occur but the only evidence in the logs after the first error is:

Thu Apr 29 04:33:36 2021 kern.err kernel: [ 2670.043971] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
Thu Apr 29 04:33:36 2021 kern.info kernel: [ 2670.050555] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
Thu Apr 29 04:33:36 2021 kern.info kernel: [ 2670.084619] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
Thu Apr 29 04:33:36 2021 kern.info kernel: [ 2670.092556] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
29.04.20213762Base systemBug ReportVery LowCriticalWAN performance regression on MT7621 21.02-rc1 vs 19.07...TrunkUnconfirmed Task Description

There is an issue with Wan throughput on the MT7621 and OpenWrt 21.02-rc1 vs 19.07.7

The test setup is an Iperf3 server running locally on the wan side of the router (A NeWifi-D2) and running Iperf3 as client on the router. This is stock firmware with no changes to the network settings from stock.

19.07.7 - TX = 531Mbps RX = 629Mbps
21.02-Rc1 - TX = 792Mbps Rx = 523Mbps

So while it appears TX has improved, RX is suffering and it is noticeable with non synthetic transfers.

Noticably the RX test on 21.02-RC1 is reporting rampant Retransmits by the Iperf server. These are not present in 19.07.7 in either direction, OR in 21.02-RC1 when the router is sending, only when its receiving. I also ran mpstat with an interval of 3 seconds to see processor load during the test. In the result sets below, iperf3 test was started during interval 3.

The command line on the router is
TX =

iperf3 -c <server ip> -P 2

RX =

iperf3 -c <server ip> -P 2 -R

19.07.7 - TX

iperf3 -c 192.168.69.102 -P 2
Connecting to host 192.168.69.102, port 5201
[  5] local 192.168.69.127 port 50742 connected to 192.168.69.102 port 5201
[  7] local 192.168.69.127 port 50744 connected to 192.168.69.102 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.04   sec  28.7 MBytes   231 Mbits/sec    0    130 KBytes       
[  7]   0.00-1.04   sec  28.7 MBytes   231 Mbits/sec    0    123 KBytes       
[SUM]   0.00-1.04   sec  57.3 MBytes   462 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   1.04-2.00   sec  28.8 MBytes   251 Mbits/sec    0    130 KBytes       
[  7]   1.04-2.00   sec  28.8 MBytes   251 Mbits/sec    0    130 KBytes       
[SUM]   1.04-2.00   sec  57.5 MBytes   502 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   2.00-3.01   sec  30.0 MBytes   251 Mbits/sec    0    130 KBytes       
[  7]   2.00-3.01   sec  30.0 MBytes   251 Mbits/sec    0    140 KBytes       
[SUM]   2.00-3.01   sec  60.0 MBytes   502 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   3.01-4.00   sec  30.0 MBytes   252 Mbits/sec    0    130 KBytes       
[  7]   3.01-4.00   sec  30.0 MBytes   252 Mbits/sec    0    140 KBytes       
[SUM]   3.01-4.00   sec  60.0 MBytes   505 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   4.00-5.03   sec  31.2 MBytes   256 Mbits/sec    0    130 KBytes       
[  7]   4.00-5.03   sec  31.2 MBytes   256 Mbits/sec    0    140 KBytes       
[SUM]   4.00-5.03   sec  62.5 MBytes   511 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   5.03-6.01   sec  30.0 MBytes   257 Mbits/sec    0    130 KBytes       
[  7]   5.03-6.01   sec  30.0 MBytes   257 Mbits/sec    0    140 KBytes       
[SUM]   5.03-6.01   sec  60.0 MBytes   513 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   6.01-7.02   sec  31.2 MBytes   258 Mbits/sec    0    130 KBytes       
[  7]   6.01-7.02   sec  31.2 MBytes   258 Mbits/sec    0    140 KBytes       
[SUM]   6.01-7.02   sec  62.5 MBytes   517 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   7.02-8.01   sec  35.0 MBytes   298 Mbits/sec    0    130 KBytes       
[  7]   7.02-8.01   sec  35.0 MBytes   298 Mbits/sec    0    140 KBytes       
[SUM]   7.02-8.01   sec  70.0 MBytes   595 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   8.01-9.01   sec  36.2 MBytes   305 Mbits/sec    0    139 KBytes       
[  7]   8.01-9.01   sec  36.2 MBytes   305 Mbits/sec    0    140 KBytes       
[SUM]   8.01-9.01   sec  72.5 MBytes   611 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   9.01-10.03  sec  37.5 MBytes   306 Mbits/sec    0    139 KBytes       
[  7]   9.01-10.03  sec  37.5 MBytes   306 Mbits/sec    0    140 KBytes       
[SUM]   9.01-10.03  sec  75.0 MBytes   612 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.03  sec   319 MBytes   266 Mbits/sec    0             sender
[  5]   0.00-10.07  sec   319 MBytes   265 Mbits/sec                  receiver
[  7]   0.00-10.03  sec   319 MBytes   266 Mbits/sec    0             sender
[  7]   0.00-10.07  sec   319 MBytes   265 Mbits/sec                  receiver
[SUM]   0.00-10.03  sec   637 MBytes   533 Mbits/sec    0             sender
[SUM]   0.00-10.07  sec   637 MBytes   531 Mbits/sec                  receiver

iperf Done.


# mpstat 3 10
Linux 4.14.221 (OpenWrt) 	04/29/21 	_mips_	(4 CPU)

05:45:14     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle
05:45:17     all    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00  100.00
05:45:20     all    0.66    0.00    0.17    0.00    0.00    0.00    0.00    0.00    0.00   99.17
05:45:23     all    0.08    0.00   18.11    0.00    0.00   10.38    0.00    0.00    0.00   71.43
05:45:26     all    1.16    0.00   22.92    0.00    0.00   13.62    0.00    0.00    0.00   62.29
05:45:29     all    0.33    0.00   24.50    0.00    0.00   14.62    0.00    0.00    0.00   60.55
05:45:32     all    0.58    0.00   14.04    0.00    0.00   10.38    0.00    0.00    0.00   75.00
05:45:35     all    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00  100.00
05:45:38     all    0.50    0.00    0.33    0.00    0.00    0.00    0.00    0.00    0.00   99.17

19.07.7 - RX (Server Iperf3 Stats)

Accepted connection from 192.168.69.127, port 50746
[  5] local 192.168.69.102 port 5201 connected to 192.168.69.127 port 50748
[  8] local 192.168.69.102 port 5201 connected to 192.168.69.127 port 50750
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  38.9 MBytes   326 Mbits/sec    0    334 KBytes       
[  8]   0.00-1.00   sec  36.5 MBytes   306 Mbits/sec    0    266 KBytes       
[SUM]   0.00-1.00   sec  75.4 MBytes   633 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   1.00-2.00   sec  37.5 MBytes   314 Mbits/sec    0    334 KBytes       
[  8]   1.00-2.00   sec  37.9 MBytes   318 Mbits/sec    0    266 KBytes       
[SUM]   1.00-2.00   sec  75.4 MBytes   632 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   2.00-3.00   sec  37.4 MBytes   314 Mbits/sec    0    334 KBytes       
[  8]   2.00-3.00   sec  37.0 MBytes   310 Mbits/sec    0    266 KBytes       
[SUM]   2.00-3.00   sec  74.4 MBytes   624 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   3.00-4.00   sec  37.5 MBytes   314 Mbits/sec    0    334 KBytes       
[  8]   3.00-4.00   sec  37.5 MBytes   315 Mbits/sec    0    266 KBytes       
[SUM]   3.00-4.00   sec  75.0 MBytes   629 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   4.00-5.00   sec  37.5 MBytes   315 Mbits/sec    0    334 KBytes       
[  8]   4.00-5.00   sec  37.7 MBytes   316 Mbits/sec    0    266 KBytes       
[SUM]   4.00-5.00   sec  75.3 MBytes   631 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   5.00-6.00   sec  37.5 MBytes   314 Mbits/sec    0    334 KBytes       
[  8]   5.00-6.00   sec  37.5 MBytes   315 Mbits/sec    0    266 KBytes       
[SUM]   5.00-6.00   sec  75.0 MBytes   629 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   6.00-7.00   sec  37.2 MBytes   312 Mbits/sec    0    430 KBytes       
[  8]   6.00-7.00   sec  36.4 MBytes   305 Mbits/sec    0    322 KBytes       
[SUM]   6.00-7.00   sec  73.5 MBytes   617 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   7.00-8.00   sec  38.3 MBytes   321 Mbits/sec    0    430 KBytes       
[  8]   7.00-8.00   sec  37.9 MBytes   318 Mbits/sec    0    322 KBytes       
[SUM]   7.00-8.00   sec  76.2 MBytes   639 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   8.00-9.00   sec  37.1 MBytes   311 Mbits/sec    0    430 KBytes       
[  8]   8.00-9.00   sec  37.0 MBytes   311 Mbits/sec    0    322 KBytes       
[SUM]   8.00-9.00   sec  74.1 MBytes   622 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   9.00-10.00  sec  37.8 MBytes   317 Mbits/sec    0    430 KBytes       
[  8]   9.00-10.00  sec  37.8 MBytes   317 Mbits/sec    0    322 KBytes       
[SUM]   9.00-10.00  sec  75.7 MBytes   635 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]  10.00-10.04  sec   954 KBytes   214 Mbits/sec    0    430 KBytes       
[  8]  10.00-10.04  sec  1.55 MBytes   356 Mbits/sec    0    322 KBytes       
[SUM]  10.00-10.04  sec  2.49 MBytes   570 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.04  sec   378 MBytes   316 Mbits/sec    0             sender
[  8]   0.00-10.04  sec   375 MBytes   313 Mbits/sec    0             sender
[SUM]   0.00-10.04  sec   752 MBytes   629 Mbits/sec    0             sender

# mpstat 3 10 
Linux 4.14.221 (OpenWrt) 	04/29/21 	_mips_	(4 CPU)

05:46:28     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle
05:46:31     all    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00  100.00
05:46:34     all    0.58    0.00    0.33    0.00    0.00    0.00    0.00    0.00    0.00   99.09
05:46:37     all    0.42    0.00   13.95    0.00    0.00   14.37    0.00    0.00    0.00   71.26
05:46:40     all    0.58    0.00   14.37    0.00    0.00   27.57    0.00    0.00    0.00   57.48
05:46:43     all    1.00    0.00   17.77    0.00    0.00   26.58    0.00    0.00    0.00   54.65
05:46:46     all    0.33    0.00   12.46    0.00    0.00   15.20    0.00    0.00    0.00   72.01
05:46:49     all    0.50    0.00    0.33    0.00    0.00    0.00    0.00    0.00    0.00   99.17
05:46:52     all    0.00    0.00    0.00    0.00    0.00    0.17    0.00    0.00    0.00   99.83

21.02-RC1 - TX

# iperf3 -c 192.168.69.102 -P 2
Connecting to host 192.168.69.102, port 5201
[  5] local 192.168.69.128 port 54862 connected to 192.168.69.102 port 5201
[  7] local 192.168.69.128 port 54864 connected to 192.168.69.102 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.02   sec  48.7 MBytes   400 Mbits/sec    0    134 KBytes       
[  7]   0.00-1.02   sec  48.6 MBytes   400 Mbits/sec    0    134 KBytes       
[SUM]   0.00-1.02   sec  97.3 MBytes   799 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   1.02-2.02   sec  47.5 MBytes   401 Mbits/sec    0    134 KBytes       
[  7]   1.02-2.02   sec  47.5 MBytes   401 Mbits/sec    0    146 KBytes       
[SUM]   1.02-2.02   sec  95.0 MBytes   801 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   2.02-3.01   sec  47.5 MBytes   399 Mbits/sec    0    134 KBytes       
[  7]   2.02-3.01   sec  47.5 MBytes   399 Mbits/sec    0    146 KBytes       
[SUM]   2.02-3.01   sec  95.0 MBytes   799 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   3.01-4.03   sec  46.8 MBytes   388 Mbits/sec    0    214 KBytes       
[  7]   3.01-4.03   sec  45.7 MBytes   379 Mbits/sec    0    164 KBytes       
[SUM]   3.01-4.03   sec  92.5 MBytes   767 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   4.03-5.01   sec  46.2 MBytes   396 Mbits/sec    0    214 KBytes       
[  7]   4.03-5.01   sec  46.2 MBytes   396 Mbits/sec    0    164 KBytes       
[SUM]   4.03-5.01   sec  92.5 MBytes   792 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   5.01-6.01   sec  47.5 MBytes   397 Mbits/sec    0    214 KBytes       
[  7]   5.01-6.01   sec  47.5 MBytes   397 Mbits/sec    0    164 KBytes       
[SUM]   5.01-6.01   sec  95.0 MBytes   794 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   6.01-7.01   sec  47.5 MBytes   398 Mbits/sec    0    214 KBytes       
[  7]   6.01-7.01   sec  47.5 MBytes   398 Mbits/sec    0    164 KBytes       
[SUM]   6.01-7.01   sec  95.0 MBytes   796 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   7.01-8.01   sec  47.5 MBytes   397 Mbits/sec    0    226 KBytes       
[  7]   7.01-8.01   sec  47.5 MBytes   397 Mbits/sec    0    174 KBytes       
[SUM]   7.01-8.01   sec  95.0 MBytes   795 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   8.01-9.02   sec  47.5 MBytes   396 Mbits/sec    0    226 KBytes       
[  7]   8.01-9.02   sec  47.5 MBytes   396 Mbits/sec    0    180 KBytes       
[SUM]   8.01-9.02   sec  95.0 MBytes   792 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   9.02-10.00  sec  46.2 MBytes   395 Mbits/sec    0    226 KBytes       
[  7]   9.02-10.00  sec  46.2 MBytes   395 Mbits/sec    0    180 KBytes       
[SUM]   9.02-10.00  sec  92.5 MBytes   790 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec   473 MBytes   397 Mbits/sec    0             sender
[  5]   0.00-10.01  sec   473 MBytes   396 Mbits/sec                  receiver
[  7]   0.00-10.00  sec   472 MBytes   396 Mbits/sec    0             sender
[  7]   0.00-10.01  sec   472 MBytes   396 Mbits/sec                  receiver
[SUM]   0.00-10.00  sec   945 MBytes   792 Mbits/sec    0             sender
[SUM]   0.00-10.01  sec   945 MBytes   792 Mbits/sec                  receiver

iperf Done.

# mpstat 3 10
Linux 5.4.111 (OpenWrt) 	04/29/21 	_mips_	(4 CPU)

06:14:41     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle
06:14:44     all    0.75    0.00    0.25    0.00    0.00    0.00    0.00    0.00    0.00   99.00
06:14:47     all    0.00    0.00    0.00    0.00    0.00    0.08    0.00    0.00    0.00   99.92
06:14:50     all    0.08    0.00   16.97    0.00    0.00   10.40    0.00    0.00    0.00   72.55
06:14:53     all    1.33    0.00   25.48    0.00    0.00   15.24    0.00    0.00    0.00   57.95
06:14:56     all    0.17    0.00   25.02    0.00    0.00   15.21    0.00    0.00    0.00   59.60
06:14:59     all    0.58    0.00   17.00    0.00    0.00    9.83    0.00    0.00    0.00   72.58
06:15:02     all    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00  100.00
06:15:05     all    0.83    0.00    0.25    0.00    0.00    0.00    0.00    0.00    0.00   98.92

21.02-RC1 - RX (Server Iperf3 stats)

Accepted connection from 192.168.69.128, port 54872
[  5] local 192.168.69.102 port 5201 connected to 192.168.69.128 port 54874
[  8] local 192.168.69.102 port 5201 connected to 192.168.69.128 port 54876
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  28.7 MBytes   241 Mbits/sec   20    342 KBytes       
[  8]   0.00-1.00   sec  34.5 MBytes   290 Mbits/sec    1    443 KBytes       
[SUM]   0.00-1.00   sec  63.3 MBytes   531 Mbits/sec   21             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   1.00-2.00   sec  28.8 MBytes   241 Mbits/sec    0    403 KBytes       
[  8]   1.00-2.00   sec  31.3 MBytes   262 Mbits/sec    4    362 KBytes       
[SUM]   1.00-2.00   sec  60.0 MBytes   504 Mbits/sec    4             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   2.00-3.00   sec  27.8 MBytes   234 Mbits/sec    7    339 KBytes       
[  8]   2.00-3.00   sec  35.5 MBytes   298 Mbits/sec    0    428 KBytes       
[SUM]   2.00-3.00   sec  63.4 MBytes   532 Mbits/sec    7             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   3.00-4.00   sec  27.9 MBytes   234 Mbits/sec    2    291 KBytes       
[  8]   3.00-4.00   sec  35.2 MBytes   296 Mbits/sec   17    356 KBytes       
[SUM]   3.00-4.00   sec  63.1 MBytes   530 Mbits/sec   19             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   4.00-5.00   sec  27.8 MBytes   234 Mbits/sec    0    356 KBytes       
[  8]   4.00-5.00   sec  34.4 MBytes   289 Mbits/sec    0    424 KBytes       
[SUM]   4.00-5.00   sec  62.3 MBytes   522 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   5.00-6.00   sec  25.2 MBytes   212 Mbits/sec    1    297 KBytes       
[  8]   5.00-6.00   sec  37.7 MBytes   316 Mbits/sec    0    486 KBytes       
[SUM]   5.00-6.00   sec  62.9 MBytes   528 Mbits/sec    1             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   6.00-7.00   sec  26.1 MBytes   219 Mbits/sec    0    359 KBytes       
[  8]   6.00-7.00   sec  36.5 MBytes   307 Mbits/sec    7    395 KBytes       
[SUM]   6.00-7.00   sec  62.6 MBytes   525 Mbits/sec    7             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   7.00-8.00   sec  30.7 MBytes   258 Mbits/sec    0    420 KBytes       
[  8]   7.00-8.00   sec  30.0 MBytes   252 Mbits/sec    4    321 KBytes       
[SUM]   7.00-8.00   sec  60.7 MBytes   509 Mbits/sec    4             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   8.00-9.00   sec  33.9 MBytes   284 Mbits/sec   10    232 KBytes       
[  8]   8.00-9.00   sec  27.7 MBytes   232 Mbits/sec    0    383 KBytes       
[SUM]   8.00-9.00   sec  61.5 MBytes   516 Mbits/sec   10             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   9.00-10.00  sec  25.4 MBytes   213 Mbits/sec    0    303 KBytes       
[  8]   9.00-10.00  sec  38.7 MBytes   324 Mbits/sec    0    451 KBytes       
[SUM]   9.00-10.00  sec  64.0 MBytes   537 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec   282 MBytes   237 Mbits/sec   40             sender
[  8]   0.00-10.01  sec   342 MBytes   286 Mbits/sec   33             sender
[SUM]   0.00-10.01  sec   624 MBytes   523 Mbits/sec   73             sender

# mpstat 3 10
Linux 5.4.111 (OpenWrt) 	04/29/21 	_mips_	(4 CPU)

06:17:59     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle
06:18:02     all    0.00    0.00    0.00    0.00    0.00    0.17    0.00    0.00    0.00   99.83
06:18:05     all    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00  100.00
06:18:08     all    1.33    0.00   16.81    0.00    0.00   31.86    0.00    0.00    0.00   50.00
06:18:11     all    0.83    0.00   22.55    0.00    0.00   44.43    0.00    0.00    0.00   32.20
06:18:14     all    1.66    0.00   23.13    0.00    0.00   43.68    0.00    0.00    0.00   31.53
06:18:17     all    0.50    0.00   12.51    0.00    0.00   24.85    0.00    0.00    0.00   62.14
06:18:20     all    0.67    0.00    0.17    0.00    0.00    0.08    0.00    0.00    0.00   99.09
06:18:23     all    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00  100.00
02.05.20213772Base systemBug ReportVery LowCriticalOpenWrt 21.02.0-rc1 reboots frequently after turning on...openwrt-21.02Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on TP-Link TL-WR1043ND v1
- Software versions of OpenWrt/LEDE release, packages, etc. OpenWrt 21.02.0-rc1 r16046-59980f7aaf / LuCI openwrt-21.02 branch git-21.106.55967-06dd6b5

- Steps to reproduce

 

Upgrade go OpenWrt 21.02.1-rc1 without saving previous configs (otherwise system will become unstable immediately after upgrade). Turn on Wireless in Network–>Wireless–>.... After this a device becomes unstable and completely unusable starting to reboot again and again.

05.05.20213782Base systemBug ReportVery LowCriticalTP-Link CPE510 v2 bootloop with 21.02.0-rc1openwrt-21.02Unconfirmed Task Description

Installing the 21.02.0-rc1 Sysupgrade image on the TP-Link CPE510 v2 or TP-Link CPE610 v1 results in the same bootloop as reported in https://bugs.openwrt.org/index.php?do=details&task_id=3750

Here is a log from my device with a line length of 80 chars

TP-LINK SafeLoader (Build time: Jun 14 2017 - 10:08:41)
CPU: 560MHz AHB: 225MHz DDR: 8MB
Performing LED check..  PASS
Press CTRL+B to enter SafeLoader: 1

Allocated memory for elf segment ok: addr: 0x80060000, size 0x16dc
Loading .text @ 0x80060000 (5852 bytes)

Starting kernel


OpenWrt kernel loader for AR7XXX/AR9XXX
Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
Looking for OpenWrt image... found at 0xbf043000
Decompressing kernel... done!
Starting kernel at 80060000...
[    0.000000] Linux version 5.4.111 (builder@buildhost) (gcc version 8.4.0 (Ope
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[    0.000000] MIPS: machine is TP-Link CPE510 v2
[    0.000000] SoC: Atheros AR9344 rev 2
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16240
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jf
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, li
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, lin
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 57336K/65536K available (5216K kernel code, 190K rwdata,
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] random: get_random_bytes called from 0x80655984 with crng_init=0
[    0.000000] CPU clock: 560.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_
[    0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669
[    0.009095] Calibrating delay loop... 278.78 BogoMIPS (lpj=557568)
[    0.052225] pid_max: default: 32768 minimum: 301
[    0.057783] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, line
[    0.066284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes,
[    0.080827] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, m
[    0.092208] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.100259] pinctrl core: initialized pinctrl subsystem
[    0.109580] NET: Registered protocol family 16
[    0.117299] GPIO line 18 (tp-link:ext:lna0) hogged as output/high
[    0.124466] GPIO line 19 (tp-link:ext:lna1) hogged as output/high
[    0.159972] workqueue: max_active 576 requested for napi_workq is out of ran
[    0.176037] clocksource: Switched to clocksource MIPS
[    0.183518] NET: Registered protocol family 2
[    0.189793] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096
[    0.199606] TCP established hash table entries: 1024 (order: 0, 4096 bytes, 
[    0.208534] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.216742] TCP: Hash tables configured (established 1024 bind 1024)
[    0.224301] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.231970] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.240490] NET: Registered protocol family 1
[    0.245632] PCI: CLS 0 bytes, default 32
[    0.255091] workingset: timestamp_bits=14 max_order=14 bucket_order=0
[    0.271344] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.278179] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORI
[    0.307686] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
[    0.321044] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[    0.329034] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.339440] printk: console [ttyS0] disabled
[    0.344535] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 25
[    0.354585] printk: console [ttyS0] enabled
[    0.354585] printk: console [ttyS0] enabled
[    0.363495] printk: bootconsole [early0] disabled
[    0.363495] printk: bootconsole [early0] disabled
[    0.388005] spi-nor spi0.0: gd25q64 (8192 Kbytes)
[    0.392920] 6 fixed-partitions partitions found on MTD device spi0.0
[    0.399384] Creating 6 MTD partitions on "spi0.0":
[    0.404285] 0x000000000000-0x000000020000 : "u-boot"
[    0.410563] 0x000000020000-0x000000030000 : "partition-table"
[    0.417611] 0x000000030000-0x000000040000 : "info"
[    0.423688] 0x000000040000-0x0000007c0000 : "firmware"
[    0.430160] 0x0000007c0000-0x0000007f0000 : "config"
[    0.436538] 0x0000007f0000-0x000000800000 : "art"
[    0.445059] libphy: Fixed MDIO Bus: probed
[    0.768479] libphy: ag71xx_mdio: probed
[    0.773748] libphy: ar8xxx-mdio: probed
[    0.785848] switch0: Atheros AR8229 rev. 1 switch registered on mdio.0
[    1.145976] ag71xx 19000000.eth: connected to PHY at mdio.0:1f:04 [uid=004dd
[    1.156116] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
[    1.162648] i2c /dev entries driver
[    1.169430] NET: Registered protocol family 10
[    1.180091] random: fast init done
[    1.184945] Segment Routing with IPv6
[    1.188879] NET: Registered protocol family 17
[    1.193512] bridge: filtering via arp/ip/ip6tables is no longer available by
[    1.206679] 8021q: 802.1Q VLAN Support v1.8
[    1.212391] hctosys: unable to open rtc device (rtc0)
[    1.218812] /dev/root: Can't open blockdev
[    1.223069] VFS: Cannot open root device "(null)" or unknown-block(0,0): err
[    1.230673] Please append a correct "root=" boot option; here are the availa
[    1.239162] 1f00             128 mtdblock0 
[    1.239166]  (driver?)
[    1.245826] 1f01              64 mtdblock1 
[    1.245829]  (driver?)
[    1.252485] 1f02              64 mtdblock2 
[    1.252488]  (driver?)
[    1.259138] 1f03            7680 mtdblock3 
[    1.259140]  (driver?)
[    1.265792] 1f04             192 mtdblock4 
[    1.265795]  (driver?)
[    1.272452] 1f05              64 mtdblock5 
[    1.272455]  (driver?)
[    1.279103] Kernel panic - not syncing: VFS: Unable to mount root fs on unkn
[    1.287482] Rebooting in 1 seconds..


05.05.20213783Base systemBug ReportVery LowCriticalMT7621 WiFi driver crash openwrt-21.02Unconfirmed Task Description

Summary

The WiFi driver crashes on an MT7621 router running OpenWRT21.02rc1 (5 commits further to be exact 6f053e5b).
The router used is an InvizBox Go (WiFi only) i.e. MT7621 + MT7603E (not supported by OpenWRT just yet - I’m working on getting there). I don’t believe the issue is specific to that hardware though.

The crash seems to happen in AP/STA mode when an AP gets added to the configuration and the STA was connected (I’ll add more information if I come across more scenarios). I’m not able to reproduce consistently at the moment.
Once crashed the WiFi stack is not usable anymore until a reboot. Following a reboot, things are back to normal.

The crash stack is as follow:

[  726.587920] ------------[ cut here ]------------
[  726.597570] WARNING: CPU: 0 PID: 1767 at backports-5.10.16-1/net/mac80211/ieee80211_i.h:1468 sta_info_alloc+0x5c4/0x5fc [mac80211]
[  726.621113] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADEr
[  726.621458]  algif_skcipher algif_rng algif_hash algif_aead af_alg sha256_generic libsha256 sha1_generic jitterentropy_rng drbg md5 hmac echainiv des_generic libdes cbc authec
[  726.859235] CPU: 0 PID: 1767 Comm: hostapd Not tainted 5.4.111 #0
[  726.871379] Stack : 8e375fb4 8007ce5c 80660000 80660d78 806c0000 80660d40 8065fe94 8e257a34
[  726.888032]         80800000 8dc34188 806aa6e3 805f993c 00000000 00000001 8e2579d8 72c69b9f
[  726.904659]         00000000 00000000 80830000 00000000 30232031 0000014b 2e352064 31312e34
[  726.921286]         00000000 00000024 00000000 000d1c63 80000000 806c0000 00000000 8e3075b8
[  726.937913]         00000009 8e146480 00000005 00000002 00000000 8034dfbc 00000000 80800000
[  726.954538]         ...
[  726.959397] Call Trace:
[  726.964284] [<8000b64c>] show_stack+0x30/0x100
[  726.973153] [<80542370>] dump_stack+0xa4/0xdc
[  726.981832] [<8002bee0>] __warn+0xc0/0x10c
[  726.989981] [<8002bf88>] warn_slowpath_fmt+0x5c/0xac
[  727.000018] [<8e3075b8>] sta_info_alloc+0x5c4/0x5fc [mac80211]
[  727.011712] [<8e3259b0>] ieee80211_nan_func_match+0x3d88/0x4410 [mac80211]
[  727.025846] ---[ end trace bc705bf94f0c5c24 ]---

Steps to reproduce

The following steps do not necessarily lead to the crash. I expect them to be what leads to it but am still unsure. The stack may show the way to a better reproduction scenario...

On an MT7621 router setup as AP/STA, add a second AP and possibly a third one.
Call /etc/init.d/network reload after each change

Current behaviour

Crash stack is visible in console/dmesg and the STA fails to reconnect (which also leads all APs to become not accessible - expected).

Expected behaviour

No crash

Notes This crash was also observed on builds before the rc1 tag. I don’t know the conditions leading to these crashes.

I had saved one older crash stack (truncated by console unfortunately) as a reference (early 21.02 branch when I started testing in preparation for release):

[ 1939.972549] ------------[ cut here ]------------
[ 1939.982051] WARNING: CPU: 2 PID: 2079 at backports-5.10.16-1/net/mac80211/ieee80211_i.h:1468 sta_info_alloc+0x5c4/0x]
[ 1940.005526] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat xt_state xt_nat xt_helper xt_cor
[ 1940.005842]  algif_skcipher algif_rng algif_hash algif_aead af_alg sha256_generic libsha256 sha1_generic jitterentroc
[ 1940.243641] CPU: 2 PID: 2079 Comm: hostapd Not tainted 5.4.111 #0
[ 1940.255784] Stack : 8df75fb4 8007ce5c 80660000 80660d78 806c0000 80660d40 8065fe94 8dd01a34
[ 1940.272451]         80800000 8fe51fc8 806aa6e3 805f993c 00000002 00000001 8dd019d8 91468ee6
[ 1940.289110]         00000000 00000000 80830000 00000000 30232031 0000012f 2e352064 31312e34
[ 1940.305752]         00000000 00000060 00000000 0003b7b9 80000000 806c0000 00000000 8df075b8
[ 1940.322392]         00000009 8fed4480 00000005 00000002 00000000 8034dfbc 00000008 80800008
[ 1940.339021]         ...
[ 1940.343883] Call Trace:
[ 1940.348778] [<8000b64c>] show_stack+0x30/0x100
[ 1940.357652] [<80542370>] dump_stack+0xa4/0xdc
[ 1940.366336] [<8002bee0>] __warn+0xc0/0x10c
[ 1940.374487] [<8002bf88>] warn_slowpath_fmt+0x5c/0xac
[ 1940.384532] [<8df075b8>] sta_info_alloc+0x5c4/0x5fc [mac80211]
[ 1940.396280] [<8df259b0>] ieee80211_nan_func_match+0x3d88/0x4410 [mac80211]
[ 1940.410460] ---[ end trace dda71e821ee728c4 ]---
11.05.20213800Base systemBug ReportVery LowCriticalath79: trunk is bricking old ath9k devicesTrunkUnconfirmed Task Description

Trunk is bricking old ath9k devices, so far a TPLINK MR3220v1 and a WR1043NDv1, retested with a fresh buildroot and base configuration, same outcome.

Autobooting in 1 seconds## Booting image at bf020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...



OpenWrt kernel loader for AR7XXX/AR9XXX
Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
Looking for OpenWrt image... not found!

System halted!

21.11.2016295KernelBug ReportVery LowHighath10k_pci 0001:01:00.0: SWBA overrun on vdevTrunkUnconfirmed Task Description

Supply the following if possible:

- TP-LINK c2600 v1.1
- LEDE Reboot r2244
- after some hours, the network device produce the below stacktrace.

[61789.980553] ————[ cut here ]———— [61789.980600] WARNING: CPU: 0 PID: 3 at net/core/dev.c:4837 net_rx_action+0×154/0x2e4()
[61789.984240] Modules linked in: pppoe ppp_async iptable_nat pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY ts_kmp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink nf_conntrack iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt br_netfilter em_cmp sch_teql em_nbyte sch_htb sch_pie sch_gred sch_dsmark cls_basic act_ipt sch_prio em_text
[61790.061568] sch_codel sch_tbf sch_sfq em_meta act_police sch_fq sch_red act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_hfsc sch_ingress ath10k_pci ath10k_core ath mac80211 cfg80211 compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables ifb ip6_tunnel tunnel6 tun snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore
[61790.130320] usb_storage uhci_hcd f2fs ext4 jbd2 mbcache crc32c_generic crypto_hash leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform ehci_hcd sd_mod ahci_platform libahci_platform libahci libata scsi_mod gpio_button_hotplug usbcore nls_base usb_common
[61790.158798] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.4.30 #0
[61790.159062] Hardware name: Qualcomm (Flattened Device Tree)
[61790.165160] [<c02207f4>] (unwind_backtrace) from [<c021d2e4>] (show_stack+0×14/0×20)
[61790.170534] [<c021d2e4>] (show_stack) from [<c03b82a4>] (dump_stack+0x8c/0xa0)
[61790.178521] [<c03b82a4>] (dump_stack) from [<c0228aec>] (warn_slowpath_common+0xa4/0xd0)
[61790.185550] [<c0228aec>] (warn_slowpath_common) from [<c0228bcc>] (warn_slowpath_null+0x1c/0×24)
[61790.193798] [<c0228bcc>] (warn_slowpath_null) from [<c050bcd0>] (net_rx_action+0×154/0x2e4)
[61790.202568] [<c050bcd0>] (net_rx_action) from [<c022bc90>] (do_softirq+0xdc/0×230)
[61790.210636] [<c022bc90>] (
do_softirq) from [<c022be18>] (run_ksoftirqd+0×34/0×64)
[61790.218626] [<c022be18>] (run_ksoftirqd) from [<c0246784>] (smpboot_thread_fn+0×190/0x1b8)
[61790.226006] [<c0246784>] (smpboot_thread_fn) from [<c02438e4>] (kthread+0xf8/0×100)
[61790.234335] [<c02438e4>] (kthread) from [<c0209cb8>] (ret_from_fork+0×14/0x3c)
[61790.241951] —[ end trace bbf62e8dea16c714 ]— [61790.250226] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 1, skipped old beacon

21.11.2016296Base systemBug ReportVery LowHighUbiquiti Bullet M 10/100 ethernet interface comes up as...TrunkUnconfirmed Task Description

For the last month or so, and persisting in r2248, when a Ubiquiti Bullet M is booted through typical Ubiquiti 10/100 passive PoE injector, the interface appears to come up in gigabit mode (see timestamp 18.990274 below), despite being only a 10/100 Mbps interface. Restarting /etc/init.d/network fixes it. I am running batman-adv over the ethernet interface, which may be involved. I will check if it happens when batman-adv is not used on the interface and report in a followup comment.

The dmesg look like this:

[    0.000000] Linux version 4.4.32 (openwrt@hawg) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1439) ) #0 Mon Nov 21 07:14:51 2016
[    0.000000] MyLoader: sysp=00030800, boardp=088201a0, parts=fdeffeff
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7240 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80412320, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=UBNT-BM mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 27616K/32768K available (2990K kernel code, 174K rwdata, 756K rodata, 296K init, 198K bss, 5152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
[    0.000013] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
[    0.007858] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
[    0.080537] pid_max: default: 32768 minimum: 301
[    0.085319] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091915] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102739] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113516] NET: Registered protocol family 16
[    0.120053] MIPS: machine is Ubiquiti Bullet M
[    0.126714] registering PCI controller with io_map_base unset
[    0.357171] PCI host bridge to bus 0000:00
[    0.361273] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.368174] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.373719] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.380486] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.388422] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[    0.388466] pci 0000:00:00.0: fixup device configuration
[    0.395018] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    0.395154] pci 0000:00:00.0: supports D1
[    0.395179] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.395521] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.395573] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    0.402864] pci 0000:00:00.0: using irq 40 for pin 1
[    0.408959] clocksource: Switched to clocksource MIPS
[    0.415845] NET: Registered protocol family 2
[    0.421435] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.428393] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.434796] TCP: Hash tables configured (established 1024 bind 1024)
[    0.441291] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.447126] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.453786] NET: Registered protocol family 1
[    0.458221] PCI: CLS 0 bytes, default 32
[    0.464223] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.470512] Crashlog allocated RAM at address 0x1f00000
[    0.495166] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.501050] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.514332] io scheduler noop registered
[    0.518252] io scheduler deadline registered (default)
[    0.523724] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.530709] console [ttyS0] disabled
[    0.554342] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12187500) is a 16550A
[    0.563020] console [ttyS0] enabled
[    0.570030] bootconsole [early0] disabled
[    0.582486] m25p80 spi0.0: found mx25l6405d, expected m25p80
[    0.588201] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.593207] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.599160] Creating 5 MTD partitions on "spi0.0":
[    0.603978] 0x000000000000-0x000000040000 : "u-boot"
[    0.611975] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.619659] 0x000000050000-0x0000007b0000 : "firmware"
[    0.638850] 2 uimage-fw partitions found on MTD device firmware
[    0.644866] 0x000000050000-0x0000001a0000 : "kernel"
[    0.651748] 0x0000001a0000-0x0000007b0000 : "rootfs"
[    0.658927] mtd: device 4 (rootfs) set to be root filesystem
[    0.664753] 1 squashfs-split partitions found on MTD device rootfs
[    0.671002] 0x000000550000-0x0000007b0000 : "rootfs_data"
[    0.678725] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.685799] 0x0000007f0000-0x000000800000 : "EEPROM"
[    0.713743] libphy: ag71xx_mdio: probed
[    1.302694] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
[    1.312905] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.322158] NET: Registered protocol family 10
[    1.332118] NET: Registered protocol family 17
[    1.336691] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.349583] 8021q: 802.1Q VLAN Support v1.8
[    1.362372] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.372025] Freeing unused kernel memory: 296K (80436000 - 80480000)
[    2.887723] init: Console is alive
[    2.891524] init: - watchdog -
[    4.278153] usbcore: registered new interface driver usbfs
[    4.283867] usbcore: registered new interface driver hub
[    4.289377] usbcore: registered new device driver usb
[    4.301662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.310384] ehci-platform: EHCI generic platform driver
[    4.319460] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.327414] ohci-platform: OHCI generic platform driver
[    4.336259] init: - preinit -
[    5.148878] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.181862] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    7.440590] eth0: link up (100Mbps/Full duplex)
[    7.445184] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.484066] jffs2: notice: (361) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.501955] mount_root: switching to jffs2 overlay
[    8.517794] urandom-seed: Seeding with /etc/urandom.seed
[    8.794632] eth0: link down
[    8.814035] procd: - early -
[    8.817063] procd: - watchdog -
[    9.492101] procd: - ubus -
[    9.545805] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.555498] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.564637] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.574254] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.583375] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.593373] random: ubusd: uninitialized urandom read (4 bytes read, 16 bits of entropy available)
[    9.602738] random: ubusd: uninitialized urandom read (4 bytes read, 16 bits of entropy available)
[    9.612394] procd: - init -
[   10.066368] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[   10.074041] Backport generated by backports.git backports-20160324-9-g0e38f5c
[   10.125220] batman_adv: B.A.T.M.A.N. advanced 2016.4 (compatibility version 15) loaded
[   10.213939] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   10.224958] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[   10.233630] ath: EEPROM regdomain: 0x0
[   10.233647] ath: EEPROM indicates default country code should be used
[   10.233661] ath: doing EEPROM country->regdmn map search
[   10.233689] ath: country maps to regdmn code: 0x3a
[   10.233705] ath: Country alpha2 being used: US
[   10.233718] ath: Regpair used: 0x3a
[   10.248634] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.257391] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   11.870351] random: jshn: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   12.001559] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   18.855427] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.875510] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[   18.990274] eth0: link up (1000Mbps/Full duplex)
[   18.994964] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.330349] batman_adv: bat0: Adding interface: eth0
[   19.335365] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[   19.359419] batman_adv: bat0: Interface activated: eth0
[   19.367077] 8021q: adding VLAN 0 to HW filter on device bat0
[   19.406417] device bat0 entered promiscuous mode
[   19.411309] br-pub: port 1(bat0) entered forwarding state
[   19.416772] br-pub: port 1(bat0) entered forwarding state
[   19.422579] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[   19.870508] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[   20.359133] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[   20.367269] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[   21.412169] br-pub: port 1(bat0) entered forwarding state
[   21.549966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.563679] device wlan0 entered promiscuous mode
[   21.591315] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.597879] br-pub: port 2(wlan0) entered forwarding state
[   21.603541] br-pub: port 2(wlan0) entered forwarding state
[   21.784924] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[   21.912131] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[   22.268273] batman_adv: bat0: Adding interface: mesh0
[   22.273432] batman_adv: bat0: Interface activated: mesh0
[   23.599046] br-pub: port 2(wlan0) entered forwarding state
[   29.369162] batman_adv: bat0: IGMP Querier appeared
[   29.374093] batman_adv: bat0: MLD Querier appeared
[   34.068975] ------------[ cut here ]------------
[   34.073700] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:306 dev_watchdog+0x1dc/0x260()
[   34.082197] NETDEV WATCHDOG: eth0 (ag71xx): transmit queue 0 timed out
[   34.088754] Modules linked in: ath9k ath9k_common mac80211 ath9k_hw ath batman_adv libcrc32c cfg80211 compat ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16
 cryptomgr aead crypto_null crc32c_generic crypto_hash
[   34.112252] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.32 #0
[   34.118013] Stack : 803c8fc4 00000000 00000001 80420000 80413038 80412cc3 803aa67c 00000000
[   34.118013] 	  8048379c 8041135c 00000200 00100000 0000000a 800a71a8 803afce8 80410000
[   34.118013] 	  00000003 8041135c 803ae0f4 8040dc2c 0000000a 800a5124 00000006 00000000
[   34.118013] 	  00000000 801f3100 00000000 00000000 00000000 00000000 00000000 00000000
[   34.118013] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   34.118013] 	  ...
[   34.153969] Call Trace:
[   34.156440] [<80071af0>] show_stack+0x50/0x84
[   34.160843] [<80081870>] warn_slowpath_common+0xa0/0xd0
[   34.166096] [<800818cc>] warn_slowpath_fmt+0x2c/0x38
[   34.171111] [<80290970>] dev_watchdog+0x1dc/0x260
[   34.175854] [<800b0460>] call_timer_fn.isra.5+0x24/0x80
[   34.181125] [<800b06e4>] run_timer_softirq+0x1b4/0x1fc
[   34.186296] [<80083dec>] __do_softirq+0x250/0x298
[   34.191059] [<8006a5d0>] plat_irq_dispatch+0xd4/0x10c
[   34.196134] [<80060830>] ret_from_irq+0x0/0x4
[   34.200526] [<80060a80>] __r4k_wait+0x20/0x40
[   34.204906] [<800a2304>] cpu_startup_entry+0x9c/0xe8
[   34.209934] [<80436bd4>] start_kernel+0x470/0x490
[   34.214656] 
[   34.216159] ---[ end trace ef06a4b3ec78272a ]---
[   34.220810] eth0: tx timeout
[   37.565193] random: nonblocking pool is initialized
[   44.068999] eth0: tx timeout
[   54.069064] eth0: tx timeout
[   64.068993] eth0: tx timeout
[   74.069871] eth0: tx timeout
[   82.660973] batman_adv: bat0: MLD Querier disappeared - multicast optimizations disabled
[   84.070901] eth0: tx timeout
[   92.701961] batman_adv: bat0: MLD Querier appeared
[   94.071717] eth0: tx timeout
[  104.072355] eth0: tx timeout
[  114.072669] eth0: tx timeout
[...]

When I do an /etc/init.d/network restart, the interface recovers to normal function, and I get this in dmesg:

[ 1296.763793] br-pub: port 2(wlan0) entered disabled state
[ 1296.769232] br-pub: port 1(bat0) entered disabled state
[ 1296.808305] device bat0 left promiscuous mode
[ 1296.812986] br-pub: port 1(bat0) entered disabled state
[ 1296.862085] IPv6: ADDRCONF(NETDEV_UP): bat0: link is not ready
[ 1296.879239] device wlan0 left promiscuous mode
[ 1296.883945] br-pub: port 2(wlan0) entered disabled state
[ 1296.904196] batman_adv: bat0: Interface deactivated: mesh0
[ 1296.909752] batman_adv: bat0: Removing interface: mesh0
[ 1296.963462] batman_adv: bat0: Interface deactivated: eth0
[ 1296.993492] eth0: link down
[ 1296.998705] batman_adv: bat0: Removing interface: eth0
[ 1301.629484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1301.649941] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[ 1301.985100] eth0: link up (100Mbps/Full duplex)
[ 1301.989698] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1302.191373] batman_adv: bat0: Adding interface: eth0
[ 1302.196453] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[ 1302.220488] batman_adv: bat0: Interface activated: eth0
[ 1302.228092] 8021q: adding VLAN 0 to HW filter on device bat0
[ 1302.275944] device bat0 entered promiscuous mode
[ 1302.280747] br-pub: port 1(bat0) entered forwarding state
[ 1302.286292] br-pub: port 1(bat0) entered forwarding state
[ 1302.292106] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[ 1302.590333] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[ 1303.213417] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[ 1303.221556] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[ 1304.283452] br-pub: port 1(bat0) entered forwarding state
[ 1304.672382] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1304.782643] device wlan0 entered promiscuous mode
[ 1304.827845] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1304.834479] br-pub: port 2(wlan0) entered forwarding state
[ 1304.840053] br-pub: port 2(wlan0) entered forwarding state
[ 1305.112607] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[ 1305.190600] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[ 1305.692918] batman_adv: bat0: Adding interface: mesh0
[ 1305.698080] batman_adv: bat0: Interface activated: mesh0
[ 1306.833410] br-pub: port 2(wlan0) entered forwarding state
[ 1312.303688] batman_adv: bat0: IGMP Querier appeared
[ 1312.308629] batman_adv: bat0: MLD Querier appeared

If I disconnect the other end of the ethernet cable so that there is no link peer, I do not see the problem (see below):

[    0.000000] Linux version 4.4.32 (openwrt@hawg) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1439) ) #0 Mon Nov 21 07:14:51 2016
[    0.000000] MyLoader: sysp=00000000, boardp=00000000, parts=ffffffff
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7240 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80412320, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=UBNT-BM mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 27616K/32768K available (2990K kernel code, 174K rwdata, 756K rodata, 296K init, 198K bss, 5152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
[    0.000013] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
[    0.007859] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
[    0.080537] pid_max: default: 32768 minimum: 301
[    0.085319] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091915] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113517] NET: Registered protocol family 16
[    0.120061] MIPS: machine is Ubiquiti Bullet M
[    0.126721] registering PCI controller with io_map_base unset
[    0.357179] PCI host bridge to bus 0000:00
[    0.361281] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.368182] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.373728] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.380495] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.388431] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[    0.388474] pci 0000:00:00.0: fixup device configuration
[    0.395026] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    0.395163] pci 0000:00:00.0: supports D1
[    0.395187] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.395530] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.395581] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    0.402872] pci 0000:00:00.0: using irq 40 for pin 1
[    0.408968] clocksource: Switched to clocksource MIPS
[    0.415854] NET: Registered protocol family 2
[    0.421444] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.428402] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.434805] TCP: Hash tables configured (established 1024 bind 1024)
[    0.441299] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.447134] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.453795] NET: Registered protocol family 1
[    0.458229] PCI: CLS 0 bytes, default 32
[    0.464231] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.470521] Crashlog allocated RAM at address 0x1f00000
[    0.495175] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.501058] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.514341] io scheduler noop registered
[    0.518261] io scheduler deadline registered (default)
[    0.523733] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.530718] console [ttyS0] disabled
[    0.554351] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12187500) is a 16550A
[    0.563030] console [ttyS0] enabled
[    0.570040] bootconsole [early0] disabled
[    0.582496] m25p80 spi0.0: found mx25l6405d, expected m25p80
[    0.588212] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.593216] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.599171] Creating 5 MTD partitions on "spi0.0":
[    0.603989] 0x000000000000-0x000000040000 : "u-boot"
[    0.611984] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.619662] 0x000000050000-0x0000007b0000 : "firmware"
[    0.638852] 2 uimage-fw partitions found on MTD device firmware
[    0.644868] 0x000000050000-0x0000001a0000 : "kernel"
[    0.651750] 0x0000001a0000-0x0000007b0000 : "rootfs"
[    0.658926] mtd: device 4 (rootfs) set to be root filesystem
[    0.664753] 1 squashfs-split partitions found on MTD device rootfs
[    0.671004] 0x000000550000-0x0000007b0000 : "rootfs_data"
[    0.678725] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.685800] 0x0000007f0000-0x000000800000 : "EEPROM"
[    0.713752] libphy: ag71xx_mdio: probed
[    1.302703] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
[    1.312917] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.322177] NET: Registered protocol family 10
[    1.332146] NET: Registered protocol family 17
[    1.336720] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.349611] 8021q: 802.1Q VLAN Support v1.8
[    1.362390] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.372040] Freeing unused kernel memory: 296K (80436000 - 80480000)
[    2.887726] init: Console is alive
[    2.891520] init: - watchdog -
[    4.278086] usbcore: registered new interface driver usbfs
[    4.283799] usbcore: registered new interface driver hub
[    4.289318] usbcore: registered new device driver usb
[    4.301475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.310215] ehci-platform: EHCI generic platform driver
[    4.319363] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.327317] ohci-platform: OHCI generic platform driver
[    4.336163] init: - preinit -
[    5.148612] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.181619] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    8.484735] jffs2: notice: (361) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.502585] mount_root: switching to jffs2 overlay
[    8.518273] urandom-seed: Seeding with /etc/urandom.seed
[    8.810840] procd: - early -
[    8.813863] procd: - watchdog -
[    9.487850] procd: - ubus -
[    9.541721] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.551409] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.560553] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.570163] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.579297] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.589333] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.598611] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.608223] procd: - init -
[   10.064115] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[   10.071796] Backport generated by backports.git backports-20160324-9-g0e38f5c
[   10.122372] batman_adv: B.A.T.M.A.N. advanced 2016.4 (compatibility version 15) loaded
[   10.205329] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   10.216362] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[   10.225034] ath: EEPROM regdomain: 0x0
[   10.225051] ath: EEPROM indicates default country code should be used
[   10.225065] ath: doing EEPROM country->regdmn map search
[   10.225093] ath: country maps to regdmn code: 0x3a
[   10.225109] ath: Country alpha2 being used: US
[   10.225122] ath: Regpair used: 0x3a
[   10.240049] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.248689] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   11.861887] random: jshn: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   11.993063] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   18.833441] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.855566] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[   21.215610] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.255512] device wlan0 entered promiscuous mode
[   21.286637] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.293301] br-pub: port 1(wlan0) entered forwarding state
[   21.298864] br-pub: port 1(wlan0) entered forwarding state
[   21.335689] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[   21.541225] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[   21.594616] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[   22.284927] batman_adv: bat0: Adding interface: mesh0
[   22.290148] batman_adv: bat0: Interface activated: mesh0
[   22.297750] 8021q: adding VLAN 0 to HW filter on device bat0
[   22.362868] device bat0 entered promiscuous mode
[   22.367627] br-pub: port 2(bat0) entered forwarding state
[   22.373200] br-pub: port 2(bat0) entered forwarding state
[   22.718089] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[   23.289035] br-pub: port 1(wlan0) entered forwarding state
[   23.309325] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[   23.317459] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[   24.369054] br-pub: port 2(bat0) entered forwarding state
[   29.389161] batman_adv: bat0: IGMP Querier appeared
[   38.069058] random: nonblocking pool is initialized
[   44.920666] eth0: link up (100Mbps/Full duplex)
[   44.925732] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   45.001214] batman_adv: bat0: Adding interface: eth0
[   45.006233] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[   45.030291] batman_adv: bat0: Interface activated: eth0
[   50.459193] batman_adv: bat0: MLD Querier appeared
[   67.509156] batman_adv: bat0: MLD Querier disappeared - multicast optimizations disabled
[   77.549128] batman_adv: bat0: MLD Querier appeared

My LEDE diffconfig looks like this:

CONFIG_TARGET_ar71xx=y
CONFIG_TARGET_ar71xx_generic=y
CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-bullet-m=y
CONFIG_DEVEL=y
CONFIG_BUSYBOX_CUSTOM=y
CONFIG_ALFRED_NEEDS_lua=y
CONFIG_BUILD_LOG=y
CONFIG_BUSYBOX_CONFIG_MESG=y
CONFIG_BUSYBOX_CONFIG_PKILL=y
CONFIG_BUSYBOX_CONFIG_RDATE=y
# CONFIG_BUSYBOX_CONFIG_SHA256SUM is not set
CONFIG_KMOD_BATMAN_ADV_BATMAN_V=y
CONFIG_KMOD_BATMAN_ADV_BLA=y
CONFIG_KMOD_BATMAN_ADV_DAT=y
CONFIG_KMOD_BATMAN_ADV_DEBUGFS=y
CONFIG_KMOD_BATMAN_ADV_MCAST=y
CONFIG_LIBCURL_COOKIES=y
CONFIG_LIBCURL_FILE=y
CONFIG_LIBCURL_FTP=y
CONFIG_LIBCURL_HTTP=y
CONFIG_LIBCURL_NO_SMB="!"
CONFIG_LIBCURL_POLARSSL=y
CONFIG_LIBCURL_PROXY=y
CONFIG_OPENSSL_ENGINE_CRYPTO=y
CONFIG_OPENSSL_WITH_DEPRECATED=y
CONFIG_OPENSSL_WITH_EC=y
CONFIG_OPENSSL_WITH_NPN=y
CONFIG_OPENSSL_WITH_PSK=y
CONFIG_OPENSSL_WITH_SRP=y
CONFIG_PACKAGE_ALFRED_BATHOSTS=y
CONFIG_PACKAGE_ALFRED_VIS=y
CONFIG_PACKAGE_alfred=y
CONFIG_PACKAGE_batctl=y
CONFIG_PACKAGE_bridge=y
CONFIG_PACKAGE_curl=y
CONFIG_PACKAGE_diffutils=y
# CONFIG_PACKAGE_dnsmasq is not set
# CONFIG_PACKAGE_firewall is not set
CONFIG_PACKAGE_horst=y
CONFIG_PACKAGE_iftop=y
# CONFIG_PACKAGE_ip6tables is not set
CONFIG_PACKAGE_iperf3=y
# CONFIG_PACKAGE_iptables is not set
CONFIG_PACKAGE_kmod-batman-adv=y
CONFIG_PACKAGE_kmod-bridge=y
CONFIG_PACKAGE_kmod-crypto-aead=y
CONFIG_PACKAGE_kmod-crypto-crc32c=y
CONFIG_PACKAGE_kmod-crypto-hash=y
CONFIG_PACKAGE_kmod-crypto-manager=y
CONFIG_PACKAGE_kmod-crypto-null=y
CONFIG_PACKAGE_kmod-crypto-pcompress=y
# CONFIG_PACKAGE_kmod-ip6tables is not set
# CONFIG_PACKAGE_kmod-ipt-conntrack is not set
# CONFIG_PACKAGE_kmod-ipt-core is not set
# CONFIG_PACKAGE_kmod-ipt-nat is not set
# CONFIG_PACKAGE_kmod-lib-crc-ccitt is not set
CONFIG_PACKAGE_kmod-lib-crc16=y
CONFIG_PACKAGE_kmod-lib-crc32c=y
CONFIG_PACKAGE_kmod-llc=y
# CONFIG_PACKAGE_kmod-nf-conntrack is not set
# CONFIG_PACKAGE_kmod-nf-conntrack6 is not set
# CONFIG_PACKAGE_kmod-nf-ipt is not set
# CONFIG_PACKAGE_kmod-nf-ipt6 is not set
# CONFIG_PACKAGE_kmod-nf-nat is not set
# CONFIG_PACKAGE_kmod-ppp is not set
CONFIG_PACKAGE_kmod-stp=y
CONFIG_PACKAGE_libcurl=y
# CONFIG_PACKAGE_libip4tc is not set
# CONFIG_PACKAGE_libip6tc is not set
CONFIG_PACKAGE_liblua=y
CONFIG_PACKAGE_libncursesw=y
CONFIG_PACKAGE_libnetsnmp=y
CONFIG_PACKAGE_libopenssl=y
CONFIG_PACKAGE_libpcap=y
CONFIG_PACKAGE_libpcre=y
CONFIG_PACKAGE_libpolarssl=y
CONFIG_PACKAGE_libpopt=y
CONFIG_PACKAGE_libpthread=y
CONFIG_PACKAGE_librt=y
# CONFIG_PACKAGE_libxtables is not set
CONFIG_PACKAGE_lua=y
# CONFIG_PACKAGE_odhcp6c is not set
# CONFIG_PACKAGE_odhcpd is not set
# CONFIG_PACKAGE_ppp is not set
CONFIG_PACKAGE_procps-ng=y
CONFIG_PACKAGE_procps-ng-free=y
CONFIG_PACKAGE_procps-ng-kill=y
CONFIG_PACKAGE_procps-ng-pgrep=y
CONFIG_PACKAGE_procps-ng-pkill=y
CONFIG_PACKAGE_procps-ng-pmap=y
CONFIG_PACKAGE_procps-ng-ps=y
CONFIG_PACKAGE_procps-ng-pwdx=y
CONFIG_PACKAGE_procps-ng-skill=y
CONFIG_PACKAGE_procps-ng-slabtop=y
CONFIG_PACKAGE_procps-ng-snice=y
CONFIG_PACKAGE_procps-ng-tload=y
CONFIG_PACKAGE_procps-ng-top=y
CONFIG_PACKAGE_procps-ng-uptime=y
CONFIG_PACKAGE_procps-ng-vmstat=y
CONFIG_PACKAGE_procps-ng-w=y
CONFIG_PACKAGE_procps-ng-watch=y
CONFIG_PACKAGE_ptp-utils=y
CONFIG_PACKAGE_rsync=y
CONFIG_PACKAGE_snmpd=y
CONFIG_PACKAGE_tcpdump=y
CONFIG_PACKAGE_terminfo=y
CONFIG_PACKAGE_wget=y
CONFIG_PACKAGE_wireless-tools=y
CONFIG_PACKAGE_zlib=y
CONFIG_RSYNC_zlib=y

My uci show looks like this (system and wireless elided):

alfred.alfred=alfred
alfred.alfred.mode='master'
alfred.alfred.batmanif='bat0'
alfred.alfred.start_vis='1'
alfred.alfred.run_facters='1'
alfred.alfred.interface='br-pub'
alfred.alfred.disabled='0'
batman-adv.bat0=mesh
batman-adv.bat0.bridge_loop_avoidance='0'
dropbear.@dropbear[0]=dropbear
dropbear.@dropbear[0].PasswordAuth='on'
dropbear.@dropbear[0].RootPasswordAuth='on'
dropbear.@dropbear[0].Port='22'
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.pub=interface
network.pub.type='bridge'
network.pub.proto='static'
network.pub.ip6assign='60'
network.pub.ifname='bat0'
network.pub.ipaddr='10.11.x.y'
network.pub.netmask='255.255.252.0'
network.pub.gateway='10.11.x.1'
network.pub.dns='10.11.x.1'
network.mesh=interface
network.mesh.mtu='1532'
network.mesh.proto='batadv'
network.mesh.mesh='bat0'
network.meshwire=interface
network.meshwire.proto='batadv'
network.meshwire.mesh='bat0'
network.meshwire.ifname='eth0'
Showing tasks 101 - 150 of 1150 Page 3 of 23 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing