OpenWrt/LEDE Project

Welcome to the OpenWrt Project bug reporting and issue tracking system

Problems to be reported here are for the current OpenWrt and legacy LEDE Project’s targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to openwrt-bugs@infradead.org.

OpenedIDCategoryTask TypePriority  descSeveritySummaryReported InStatus
05.05.20213783Base systemBug ReportVery LowCriticalMT7621 WiFi driver crash openwrt-21.02Unconfirmed Task Description

Summary

The WiFi driver crashes on an MT7621 router running OpenWRT21.02rc1 (5 commits further to be exact 6f053e5b).
The router used is an InvizBox Go (WiFi only) i.e. MT7621 + MT7603E (not supported by OpenWRT just yet - I’m working on getting there). I don’t believe the issue is specific to that hardware though.

The crash seems to happen in AP/STA mode when an AP gets added to the configuration and the STA was connected (I’ll add more information if I come across more scenarios). I’m not able to reproduce consistently at the moment.
Once crashed the WiFi stack is not usable anymore until a reboot. Following a reboot, things are back to normal.

The crash stack is as follow:

[  726.587920] ------------[ cut here ]------------
[  726.597570] WARNING: CPU: 0 PID: 1767 at backports-5.10.16-1/net/mac80211/ieee80211_i.h:1468 sta_info_alloc+0x5c4/0x5fc [mac80211]
[  726.621113] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADEr
[  726.621458]  algif_skcipher algif_rng algif_hash algif_aead af_alg sha256_generic libsha256 sha1_generic jitterentropy_rng drbg md5 hmac echainiv des_generic libdes cbc authec
[  726.859235] CPU: 0 PID: 1767 Comm: hostapd Not tainted 5.4.111 #0
[  726.871379] Stack : 8e375fb4 8007ce5c 80660000 80660d78 806c0000 80660d40 8065fe94 8e257a34
[  726.888032]         80800000 8dc34188 806aa6e3 805f993c 00000000 00000001 8e2579d8 72c69b9f
[  726.904659]         00000000 00000000 80830000 00000000 30232031 0000014b 2e352064 31312e34
[  726.921286]         00000000 00000024 00000000 000d1c63 80000000 806c0000 00000000 8e3075b8
[  726.937913]         00000009 8e146480 00000005 00000002 00000000 8034dfbc 00000000 80800000
[  726.954538]         ...
[  726.959397] Call Trace:
[  726.964284] [<8000b64c>] show_stack+0x30/0x100
[  726.973153] [<80542370>] dump_stack+0xa4/0xdc
[  726.981832] [<8002bee0>] __warn+0xc0/0x10c
[  726.989981] [<8002bf88>] warn_slowpath_fmt+0x5c/0xac
[  727.000018] [<8e3075b8>] sta_info_alloc+0x5c4/0x5fc [mac80211]
[  727.011712] [<8e3259b0>] ieee80211_nan_func_match+0x3d88/0x4410 [mac80211]
[  727.025846] ---[ end trace bc705bf94f0c5c24 ]---

Steps to reproduce

The following steps do not necessarily lead to the crash. I expect them to be what leads to it but am still unsure. The stack may show the way to a better reproduction scenario...

On an MT7621 router setup as AP/STA, add a second AP and possibly a third one.
Call /etc/init.d/network reload after each change

Current behaviour

Crash stack is visible in console/dmesg and the STA fails to reconnect (which also leads all APs to become not accessible - expected).

Expected behaviour

No crash

Notes This crash was also observed on builds before the rc1 tag. I don’t know the conditions leading to these crashes.

I had saved one older crash stack (truncated by console unfortunately) as a reference (early 21.02 branch when I started testing in preparation for release):

[ 1939.972549] ------------[ cut here ]------------
[ 1939.982051] WARNING: CPU: 2 PID: 2079 at backports-5.10.16-1/net/mac80211/ieee80211_i.h:1468 sta_info_alloc+0x5c4/0x]
[ 1940.005526] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat xt_state xt_nat xt_helper xt_cor
[ 1940.005842]  algif_skcipher algif_rng algif_hash algif_aead af_alg sha256_generic libsha256 sha1_generic jitterentroc
[ 1940.243641] CPU: 2 PID: 2079 Comm: hostapd Not tainted 5.4.111 #0
[ 1940.255784] Stack : 8df75fb4 8007ce5c 80660000 80660d78 806c0000 80660d40 8065fe94 8dd01a34
[ 1940.272451]         80800000 8fe51fc8 806aa6e3 805f993c 00000002 00000001 8dd019d8 91468ee6
[ 1940.289110]         00000000 00000000 80830000 00000000 30232031 0000012f 2e352064 31312e34
[ 1940.305752]         00000000 00000060 00000000 0003b7b9 80000000 806c0000 00000000 8df075b8
[ 1940.322392]         00000009 8fed4480 00000005 00000002 00000000 8034dfbc 00000008 80800008
[ 1940.339021]         ...
[ 1940.343883] Call Trace:
[ 1940.348778] [<8000b64c>] show_stack+0x30/0x100
[ 1940.357652] [<80542370>] dump_stack+0xa4/0xdc
[ 1940.366336] [<8002bee0>] __warn+0xc0/0x10c
[ 1940.374487] [<8002bf88>] warn_slowpath_fmt+0x5c/0xac
[ 1940.384532] [<8df075b8>] sta_info_alloc+0x5c4/0x5fc [mac80211]
[ 1940.396280] [<8df259b0>] ieee80211_nan_func_match+0x3d88/0x4410 [mac80211]
[ 1940.410460] ---[ end trace dda71e821ee728c4 ]---
11.05.20213800Base systemBug ReportVery LowCriticalath79: trunk is bricking old ath9k devicesTrunkUnconfirmed Task Description

Trunk is bricking old ath9k devices, so far a TPLINK MR3220v1 and a WR1043NDv1, retested with a fresh buildroot and base configuration, same outcome.

Autobooting in 1 seconds## Booting image at bf020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...



OpenWrt kernel loader for AR7XXX/AR9XXX
Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
Looking for OpenWrt image... not found!

System halted!

27.10.2016253Base systemBug ReportVery LowHighMulticast over wireless ceases to work properly after a...AllNew Task Description

I am having a problem on a UBNT UAP-LR where, if many clients stay connected the router for a long time, multicast packets will stop being reliably sent to the wireless clients. I can reproduce this with LEDE r1953, but it goes back at least as far as OpenWRT 15.05.1 with kernel 3.18. I can not, however, reproduce it on another network with the same WAP but with only one or two wireless clients.

This originally manifested as IPv6 ceasing to work since the (multicasted) RA packets were not reaching the wireless clients. I used tcpdump on the WAP and determined that the RAs were arriving through the wired interface and leaving through the wireless interface as they should, but tcpdump on the client indicates that a vast majority of the RAs are never received. (Please note that the IPv6 issue is not reproducible with the router running OpenWRT/LEDE and odhcpd, since odhcpd unicasts RAs sent as a response to an RS instead of multicasting them, while it is reproducible when the router is running radvd, for example as pfSense does.)

21.11.2016295KernelBug ReportVery LowHighath10k_pci 0001:01:00.0: SWBA overrun on vdevTrunkUnconfirmed Task Description

Supply the following if possible:

- TP-LINK c2600 v1.1
- LEDE Reboot r2244
- after some hours, the network device produce the below stacktrace.

[61789.980553] ————[ cut here ]———— [61789.980600] WARNING: CPU: 0 PID: 3 at net/core/dev.c:4837 net_rx_action+0×154/0x2e4()
[61789.984240] Modules linked in: pppoe ppp_async iptable_nat pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY ts_kmp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink nf_conntrack iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt br_netfilter em_cmp sch_teql em_nbyte sch_htb sch_pie sch_gred sch_dsmark cls_basic act_ipt sch_prio em_text
[61790.061568] sch_codel sch_tbf sch_sfq em_meta act_police sch_fq sch_red act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_hfsc sch_ingress ath10k_pci ath10k_core ath mac80211 cfg80211 compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables ifb ip6_tunnel tunnel6 tun snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore
[61790.130320] usb_storage uhci_hcd f2fs ext4 jbd2 mbcache crc32c_generic crypto_hash leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform ehci_hcd sd_mod ahci_platform libahci_platform libahci libata scsi_mod gpio_button_hotplug usbcore nls_base usb_common
[61790.158798] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.4.30 #0
[61790.159062] Hardware name: Qualcomm (Flattened Device Tree)
[61790.165160] [<c02207f4>] (unwind_backtrace) from [<c021d2e4>] (show_stack+0×14/0×20)
[61790.170534] [<c021d2e4>] (show_stack) from [<c03b82a4>] (dump_stack+0x8c/0xa0)
[61790.178521] [<c03b82a4>] (dump_stack) from [<c0228aec>] (warn_slowpath_common+0xa4/0xd0)
[61790.185550] [<c0228aec>] (warn_slowpath_common) from [<c0228bcc>] (warn_slowpath_null+0x1c/0×24)
[61790.193798] [<c0228bcc>] (warn_slowpath_null) from [<c050bcd0>] (net_rx_action+0×154/0x2e4)
[61790.202568] [<c050bcd0>] (net_rx_action) from [<c022bc90>] (do_softirq+0xdc/0×230)
[61790.210636] [<c022bc90>] (
do_softirq) from [<c022be18>] (run_ksoftirqd+0×34/0×64)
[61790.218626] [<c022be18>] (run_ksoftirqd) from [<c0246784>] (smpboot_thread_fn+0×190/0x1b8)
[61790.226006] [<c0246784>] (smpboot_thread_fn) from [<c02438e4>] (kthread+0xf8/0×100)
[61790.234335] [<c02438e4>] (kthread) from [<c0209cb8>] (ret_from_fork+0×14/0x3c)
[61790.241951] —[ end trace bbf62e8dea16c714 ]— [61790.250226] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 1, skipped old beacon

21.11.2016296Base systemBug ReportVery LowHighUbiquiti Bullet M 10/100 ethernet interface comes up as...TrunkUnconfirmed Task Description

For the last month or so, and persisting in r2248, when a Ubiquiti Bullet M is booted through typical Ubiquiti 10/100 passive PoE injector, the interface appears to come up in gigabit mode (see timestamp 18.990274 below), despite being only a 10/100 Mbps interface. Restarting /etc/init.d/network fixes it. I am running batman-adv over the ethernet interface, which may be involved. I will check if it happens when batman-adv is not used on the interface and report in a followup comment.

The dmesg look like this:

[    0.000000] Linux version 4.4.32 (openwrt@hawg) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1439) ) #0 Mon Nov 21 07:14:51 2016
[    0.000000] MyLoader: sysp=00030800, boardp=088201a0, parts=fdeffeff
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7240 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80412320, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=UBNT-BM mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 27616K/32768K available (2990K kernel code, 174K rwdata, 756K rodata, 296K init, 198K bss, 5152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
[    0.000013] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
[    0.007858] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
[    0.080537] pid_max: default: 32768 minimum: 301
[    0.085319] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091915] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102739] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113516] NET: Registered protocol family 16
[    0.120053] MIPS: machine is Ubiquiti Bullet M
[    0.126714] registering PCI controller with io_map_base unset
[    0.357171] PCI host bridge to bus 0000:00
[    0.361273] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.368174] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.373719] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.380486] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.388422] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[    0.388466] pci 0000:00:00.0: fixup device configuration
[    0.395018] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    0.395154] pci 0000:00:00.0: supports D1
[    0.395179] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.395521] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.395573] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    0.402864] pci 0000:00:00.0: using irq 40 for pin 1
[    0.408959] clocksource: Switched to clocksource MIPS
[    0.415845] NET: Registered protocol family 2
[    0.421435] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.428393] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.434796] TCP: Hash tables configured (established 1024 bind 1024)
[    0.441291] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.447126] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.453786] NET: Registered protocol family 1
[    0.458221] PCI: CLS 0 bytes, default 32
[    0.464223] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.470512] Crashlog allocated RAM at address 0x1f00000
[    0.495166] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.501050] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.514332] io scheduler noop registered
[    0.518252] io scheduler deadline registered (default)
[    0.523724] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.530709] console [ttyS0] disabled
[    0.554342] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12187500) is a 16550A
[    0.563020] console [ttyS0] enabled
[    0.570030] bootconsole [early0] disabled
[    0.582486] m25p80 spi0.0: found mx25l6405d, expected m25p80
[    0.588201] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.593207] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.599160] Creating 5 MTD partitions on "spi0.0":
[    0.603978] 0x000000000000-0x000000040000 : "u-boot"
[    0.611975] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.619659] 0x000000050000-0x0000007b0000 : "firmware"
[    0.638850] 2 uimage-fw partitions found on MTD device firmware
[    0.644866] 0x000000050000-0x0000001a0000 : "kernel"
[    0.651748] 0x0000001a0000-0x0000007b0000 : "rootfs"
[    0.658927] mtd: device 4 (rootfs) set to be root filesystem
[    0.664753] 1 squashfs-split partitions found on MTD device rootfs
[    0.671002] 0x000000550000-0x0000007b0000 : "rootfs_data"
[    0.678725] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.685799] 0x0000007f0000-0x000000800000 : "EEPROM"
[    0.713743] libphy: ag71xx_mdio: probed
[    1.302694] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
[    1.312905] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.322158] NET: Registered protocol family 10
[    1.332118] NET: Registered protocol family 17
[    1.336691] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.349583] 8021q: 802.1Q VLAN Support v1.8
[    1.362372] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.372025] Freeing unused kernel memory: 296K (80436000 - 80480000)
[    2.887723] init: Console is alive
[    2.891524] init: - watchdog -
[    4.278153] usbcore: registered new interface driver usbfs
[    4.283867] usbcore: registered new interface driver hub
[    4.289377] usbcore: registered new device driver usb
[    4.301662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.310384] ehci-platform: EHCI generic platform driver
[    4.319460] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.327414] ohci-platform: OHCI generic platform driver
[    4.336259] init: - preinit -
[    5.148878] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.181862] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    7.440590] eth0: link up (100Mbps/Full duplex)
[    7.445184] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.484066] jffs2: notice: (361) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.501955] mount_root: switching to jffs2 overlay
[    8.517794] urandom-seed: Seeding with /etc/urandom.seed
[    8.794632] eth0: link down
[    8.814035] procd: - early -
[    8.817063] procd: - watchdog -
[    9.492101] procd: - ubus -
[    9.545805] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.555498] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.564637] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.574254] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.583375] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.593373] random: ubusd: uninitialized urandom read (4 bytes read, 16 bits of entropy available)
[    9.602738] random: ubusd: uninitialized urandom read (4 bytes read, 16 bits of entropy available)
[    9.612394] procd: - init -
[   10.066368] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[   10.074041] Backport generated by backports.git backports-20160324-9-g0e38f5c
[   10.125220] batman_adv: B.A.T.M.A.N. advanced 2016.4 (compatibility version 15) loaded
[   10.213939] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   10.224958] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[   10.233630] ath: EEPROM regdomain: 0x0
[   10.233647] ath: EEPROM indicates default country code should be used
[   10.233661] ath: doing EEPROM country->regdmn map search
[   10.233689] ath: country maps to regdmn code: 0x3a
[   10.233705] ath: Country alpha2 being used: US
[   10.233718] ath: Regpair used: 0x3a
[   10.248634] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.257391] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   11.870351] random: jshn: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   12.001559] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   18.855427] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.875510] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[   18.990274] eth0: link up (1000Mbps/Full duplex)
[   18.994964] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.330349] batman_adv: bat0: Adding interface: eth0
[   19.335365] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[   19.359419] batman_adv: bat0: Interface activated: eth0
[   19.367077] 8021q: adding VLAN 0 to HW filter on device bat0
[   19.406417] device bat0 entered promiscuous mode
[   19.411309] br-pub: port 1(bat0) entered forwarding state
[   19.416772] br-pub: port 1(bat0) entered forwarding state
[   19.422579] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[   19.870508] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[   20.359133] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[   20.367269] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[   21.412169] br-pub: port 1(bat0) entered forwarding state
[   21.549966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.563679] device wlan0 entered promiscuous mode
[   21.591315] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.597879] br-pub: port 2(wlan0) entered forwarding state
[   21.603541] br-pub: port 2(wlan0) entered forwarding state
[   21.784924] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[   21.912131] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[   22.268273] batman_adv: bat0: Adding interface: mesh0
[   22.273432] batman_adv: bat0: Interface activated: mesh0
[   23.599046] br-pub: port 2(wlan0) entered forwarding state
[   29.369162] batman_adv: bat0: IGMP Querier appeared
[   29.374093] batman_adv: bat0: MLD Querier appeared
[   34.068975] ------------[ cut here ]------------
[   34.073700] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:306 dev_watchdog+0x1dc/0x260()
[   34.082197] NETDEV WATCHDOG: eth0 (ag71xx): transmit queue 0 timed out
[   34.088754] Modules linked in: ath9k ath9k_common mac80211 ath9k_hw ath batman_adv libcrc32c cfg80211 compat ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16
 cryptomgr aead crypto_null crc32c_generic crypto_hash
[   34.112252] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.32 #0
[   34.118013] Stack : 803c8fc4 00000000 00000001 80420000 80413038 80412cc3 803aa67c 00000000
[   34.118013] 	  8048379c 8041135c 00000200 00100000 0000000a 800a71a8 803afce8 80410000
[   34.118013] 	  00000003 8041135c 803ae0f4 8040dc2c 0000000a 800a5124 00000006 00000000
[   34.118013] 	  00000000 801f3100 00000000 00000000 00000000 00000000 00000000 00000000
[   34.118013] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   34.118013] 	  ...
[   34.153969] Call Trace:
[   34.156440] [<80071af0>] show_stack+0x50/0x84
[   34.160843] [<80081870>] warn_slowpath_common+0xa0/0xd0
[   34.166096] [<800818cc>] warn_slowpath_fmt+0x2c/0x38
[   34.171111] [<80290970>] dev_watchdog+0x1dc/0x260
[   34.175854] [<800b0460>] call_timer_fn.isra.5+0x24/0x80
[   34.181125] [<800b06e4>] run_timer_softirq+0x1b4/0x1fc
[   34.186296] [<80083dec>] __do_softirq+0x250/0x298
[   34.191059] [<8006a5d0>] plat_irq_dispatch+0xd4/0x10c
[   34.196134] [<80060830>] ret_from_irq+0x0/0x4
[   34.200526] [<80060a80>] __r4k_wait+0x20/0x40
[   34.204906] [<800a2304>] cpu_startup_entry+0x9c/0xe8
[   34.209934] [<80436bd4>] start_kernel+0x470/0x490
[   34.214656] 
[   34.216159] ---[ end trace ef06a4b3ec78272a ]---
[   34.220810] eth0: tx timeout
[   37.565193] random: nonblocking pool is initialized
[   44.068999] eth0: tx timeout
[   54.069064] eth0: tx timeout
[   64.068993] eth0: tx timeout
[   74.069871] eth0: tx timeout
[   82.660973] batman_adv: bat0: MLD Querier disappeared - multicast optimizations disabled
[   84.070901] eth0: tx timeout
[   92.701961] batman_adv: bat0: MLD Querier appeared
[   94.071717] eth0: tx timeout
[  104.072355] eth0: tx timeout
[  114.072669] eth0: tx timeout
[...]

When I do an /etc/init.d/network restart, the interface recovers to normal function, and I get this in dmesg:

[ 1296.763793] br-pub: port 2(wlan0) entered disabled state
[ 1296.769232] br-pub: port 1(bat0) entered disabled state
[ 1296.808305] device bat0 left promiscuous mode
[ 1296.812986] br-pub: port 1(bat0) entered disabled state
[ 1296.862085] IPv6: ADDRCONF(NETDEV_UP): bat0: link is not ready
[ 1296.879239] device wlan0 left promiscuous mode
[ 1296.883945] br-pub: port 2(wlan0) entered disabled state
[ 1296.904196] batman_adv: bat0: Interface deactivated: mesh0
[ 1296.909752] batman_adv: bat0: Removing interface: mesh0
[ 1296.963462] batman_adv: bat0: Interface deactivated: eth0
[ 1296.993492] eth0: link down
[ 1296.998705] batman_adv: bat0: Removing interface: eth0
[ 1301.629484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1301.649941] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[ 1301.985100] eth0: link up (100Mbps/Full duplex)
[ 1301.989698] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1302.191373] batman_adv: bat0: Adding interface: eth0
[ 1302.196453] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[ 1302.220488] batman_adv: bat0: Interface activated: eth0
[ 1302.228092] 8021q: adding VLAN 0 to HW filter on device bat0
[ 1302.275944] device bat0 entered promiscuous mode
[ 1302.280747] br-pub: port 1(bat0) entered forwarding state
[ 1302.286292] br-pub: port 1(bat0) entered forwarding state
[ 1302.292106] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[ 1302.590333] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[ 1303.213417] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[ 1303.221556] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[ 1304.283452] br-pub: port 1(bat0) entered forwarding state
[ 1304.672382] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1304.782643] device wlan0 entered promiscuous mode
[ 1304.827845] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1304.834479] br-pub: port 2(wlan0) entered forwarding state
[ 1304.840053] br-pub: port 2(wlan0) entered forwarding state
[ 1305.112607] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[ 1305.190600] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[ 1305.692918] batman_adv: bat0: Adding interface: mesh0
[ 1305.698080] batman_adv: bat0: Interface activated: mesh0
[ 1306.833410] br-pub: port 2(wlan0) entered forwarding state
[ 1312.303688] batman_adv: bat0: IGMP Querier appeared
[ 1312.308629] batman_adv: bat0: MLD Querier appeared

If I disconnect the other end of the ethernet cable so that there is no link peer, I do not see the problem (see below):

[    0.000000] Linux version 4.4.32 (openwrt@hawg) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1439) ) #0 Mon Nov 21 07:14:51 2016
[    0.000000] MyLoader: sysp=00000000, boardp=00000000, parts=ffffffff
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7240 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80412320, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=UBNT-BM mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 27616K/32768K available (2990K kernel code, 174K rwdata, 756K rodata, 296K init, 198K bss, 5152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
[    0.000013] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
[    0.007859] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
[    0.080537] pid_max: default: 32768 minimum: 301
[    0.085319] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091915] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113517] NET: Registered protocol family 16
[    0.120061] MIPS: machine is Ubiquiti Bullet M
[    0.126721] registering PCI controller with io_map_base unset
[    0.357179] PCI host bridge to bus 0000:00
[    0.361281] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.368182] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.373728] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.380495] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.388431] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[    0.388474] pci 0000:00:00.0: fixup device configuration
[    0.395026] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    0.395163] pci 0000:00:00.0: supports D1
[    0.395187] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.395530] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.395581] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    0.402872] pci 0000:00:00.0: using irq 40 for pin 1
[    0.408968] clocksource: Switched to clocksource MIPS
[    0.415854] NET: Registered protocol family 2
[    0.421444] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.428402] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.434805] TCP: Hash tables configured (established 1024 bind 1024)
[    0.441299] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.447134] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.453795] NET: Registered protocol family 1
[    0.458229] PCI: CLS 0 bytes, default 32
[    0.464231] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.470521] Crashlog allocated RAM at address 0x1f00000
[    0.495175] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.501058] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.514341] io scheduler noop registered
[    0.518261] io scheduler deadline registered (default)
[    0.523733] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.530718] console [ttyS0] disabled
[    0.554351] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12187500) is a 16550A
[    0.563030] console [ttyS0] enabled
[    0.570040] bootconsole [early0] disabled
[    0.582496] m25p80 spi0.0: found mx25l6405d, expected m25p80
[    0.588212] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.593216] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.599171] Creating 5 MTD partitions on "spi0.0":
[    0.603989] 0x000000000000-0x000000040000 : "u-boot"
[    0.611984] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.619662] 0x000000050000-0x0000007b0000 : "firmware"
[    0.638852] 2 uimage-fw partitions found on MTD device firmware
[    0.644868] 0x000000050000-0x0000001a0000 : "kernel"
[    0.651750] 0x0000001a0000-0x0000007b0000 : "rootfs"
[    0.658926] mtd: device 4 (rootfs) set to be root filesystem
[    0.664753] 1 squashfs-split partitions found on MTD device rootfs
[    0.671004] 0x000000550000-0x0000007b0000 : "rootfs_data"
[    0.678725] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.685800] 0x0000007f0000-0x000000800000 : "EEPROM"
[    0.713752] libphy: ag71xx_mdio: probed
[    1.302703] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
[    1.312917] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.322177] NET: Registered protocol family 10
[    1.332146] NET: Registered protocol family 17
[    1.336720] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.349611] 8021q: 802.1Q VLAN Support v1.8
[    1.362390] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.372040] Freeing unused kernel memory: 296K (80436000 - 80480000)
[    2.887726] init: Console is alive
[    2.891520] init: - watchdog -
[    4.278086] usbcore: registered new interface driver usbfs
[    4.283799] usbcore: registered new interface driver hub
[    4.289318] usbcore: registered new device driver usb
[    4.301475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.310215] ehci-platform: EHCI generic platform driver
[    4.319363] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.327317] ohci-platform: OHCI generic platform driver
[    4.336163] init: - preinit -
[    5.148612] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.181619] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    8.484735] jffs2: notice: (361) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.502585] mount_root: switching to jffs2 overlay
[    8.518273] urandom-seed: Seeding with /etc/urandom.seed
[    8.810840] procd: - early -
[    8.813863] procd: - watchdog -
[    9.487850] procd: - ubus -
[    9.541721] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.551409] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.560553] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.570163] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.579297] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.589333] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.598611] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.608223] procd: - init -
[   10.064115] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[   10.071796] Backport generated by backports.git backports-20160324-9-g0e38f5c
[   10.122372] batman_adv: B.A.T.M.A.N. advanced 2016.4 (compatibility version 15) loaded
[   10.205329] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   10.216362] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[   10.225034] ath: EEPROM regdomain: 0x0
[   10.225051] ath: EEPROM indicates default country code should be used
[   10.225065] ath: doing EEPROM country->regdmn map search
[   10.225093] ath: country maps to regdmn code: 0x3a
[   10.225109] ath: Country alpha2 being used: US
[   10.225122] ath: Regpair used: 0x3a
[   10.240049] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.248689] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   11.861887] random: jshn: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   11.993063] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   18.833441] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.855566] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[   21.215610] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.255512] device wlan0 entered promiscuous mode
[   21.286637] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.293301] br-pub: port 1(wlan0) entered forwarding state
[   21.298864] br-pub: port 1(wlan0) entered forwarding state
[   21.335689] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[   21.541225] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[   21.594616] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[   22.284927] batman_adv: bat0: Adding interface: mesh0
[   22.290148] batman_adv: bat0: Interface activated: mesh0
[   22.297750] 8021q: adding VLAN 0 to HW filter on device bat0
[   22.362868] device bat0 entered promiscuous mode
[   22.367627] br-pub: port 2(bat0) entered forwarding state
[   22.373200] br-pub: port 2(bat0) entered forwarding state
[   22.718089] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[   23.289035] br-pub: port 1(wlan0) entered forwarding state
[   23.309325] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[   23.317459] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[   24.369054] br-pub: port 2(bat0) entered forwarding state
[   29.389161] batman_adv: bat0: IGMP Querier appeared
[   38.069058] random: nonblocking pool is initialized
[   44.920666] eth0: link up (100Mbps/Full duplex)
[   44.925732] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   45.001214] batman_adv: bat0: Adding interface: eth0
[   45.006233] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[   45.030291] batman_adv: bat0: Interface activated: eth0
[   50.459193] batman_adv: bat0: MLD Querier appeared
[   67.509156] batman_adv: bat0: MLD Querier disappeared - multicast optimizations disabled
[   77.549128] batman_adv: bat0: MLD Querier appeared

My LEDE diffconfig looks like this:

CONFIG_TARGET_ar71xx=y
CONFIG_TARGET_ar71xx_generic=y
CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-bullet-m=y
CONFIG_DEVEL=y
CONFIG_BUSYBOX_CUSTOM=y
CONFIG_ALFRED_NEEDS_lua=y
CONFIG_BUILD_LOG=y
CONFIG_BUSYBOX_CONFIG_MESG=y
CONFIG_BUSYBOX_CONFIG_PKILL=y
CONFIG_BUSYBOX_CONFIG_RDATE=y
# CONFIG_BUSYBOX_CONFIG_SHA256SUM is not set
CONFIG_KMOD_BATMAN_ADV_BATMAN_V=y
CONFIG_KMOD_BATMAN_ADV_BLA=y
CONFIG_KMOD_BATMAN_ADV_DAT=y
CONFIG_KMOD_BATMAN_ADV_DEBUGFS=y
CONFIG_KMOD_BATMAN_ADV_MCAST=y
CONFIG_LIBCURL_COOKIES=y
CONFIG_LIBCURL_FILE=y
CONFIG_LIBCURL_FTP=y
CONFIG_LIBCURL_HTTP=y
CONFIG_LIBCURL_NO_SMB="!"
CONFIG_LIBCURL_POLARSSL=y
CONFIG_LIBCURL_PROXY=y
CONFIG_OPENSSL_ENGINE_CRYPTO=y
CONFIG_OPENSSL_WITH_DEPRECATED=y
CONFIG_OPENSSL_WITH_EC=y
CONFIG_OPENSSL_WITH_NPN=y
CONFIG_OPENSSL_WITH_PSK=y
CONFIG_OPENSSL_WITH_SRP=y
CONFIG_PACKAGE_ALFRED_BATHOSTS=y
CONFIG_PACKAGE_ALFRED_VIS=y
CONFIG_PACKAGE_alfred=y
CONFIG_PACKAGE_batctl=y
CONFIG_PACKAGE_bridge=y
CONFIG_PACKAGE_curl=y
CONFIG_PACKAGE_diffutils=y
# CONFIG_PACKAGE_dnsmasq is not set
# CONFIG_PACKAGE_firewall is not set
CONFIG_PACKAGE_horst=y
CONFIG_PACKAGE_iftop=y
# CONFIG_PACKAGE_ip6tables is not set
CONFIG_PACKAGE_iperf3=y
# CONFIG_PACKAGE_iptables is not set
CONFIG_PACKAGE_kmod-batman-adv=y
CONFIG_PACKAGE_kmod-bridge=y
CONFIG_PACKAGE_kmod-crypto-aead=y
CONFIG_PACKAGE_kmod-crypto-crc32c=y
CONFIG_PACKAGE_kmod-crypto-hash=y
CONFIG_PACKAGE_kmod-crypto-manager=y
CONFIG_PACKAGE_kmod-crypto-null=y
CONFIG_PACKAGE_kmod-crypto-pcompress=y
# CONFIG_PACKAGE_kmod-ip6tables is not set
# CONFIG_PACKAGE_kmod-ipt-conntrack is not set
# CONFIG_PACKAGE_kmod-ipt-core is not set
# CONFIG_PACKAGE_kmod-ipt-nat is not set
# CONFIG_PACKAGE_kmod-lib-crc-ccitt is not set
CONFIG_PACKAGE_kmod-lib-crc16=y
CONFIG_PACKAGE_kmod-lib-crc32c=y
CONFIG_PACKAGE_kmod-llc=y
# CONFIG_PACKAGE_kmod-nf-conntrack is not set
# CONFIG_PACKAGE_kmod-nf-conntrack6 is not set
# CONFIG_PACKAGE_kmod-nf-ipt is not set
# CONFIG_PACKAGE_kmod-nf-ipt6 is not set
# CONFIG_PACKAGE_kmod-nf-nat is not set
# CONFIG_PACKAGE_kmod-ppp is not set
CONFIG_PACKAGE_kmod-stp=y
CONFIG_PACKAGE_libcurl=y
# CONFIG_PACKAGE_libip4tc is not set
# CONFIG_PACKAGE_libip6tc is not set
CONFIG_PACKAGE_liblua=y
CONFIG_PACKAGE_libncursesw=y
CONFIG_PACKAGE_libnetsnmp=y
CONFIG_PACKAGE_libopenssl=y
CONFIG_PACKAGE_libpcap=y
CONFIG_PACKAGE_libpcre=y
CONFIG_PACKAGE_libpolarssl=y
CONFIG_PACKAGE_libpopt=y
CONFIG_PACKAGE_libpthread=y
CONFIG_PACKAGE_librt=y
# CONFIG_PACKAGE_libxtables is not set
CONFIG_PACKAGE_lua=y
# CONFIG_PACKAGE_odhcp6c is not set
# CONFIG_PACKAGE_odhcpd is not set
# CONFIG_PACKAGE_ppp is not set
CONFIG_PACKAGE_procps-ng=y
CONFIG_PACKAGE_procps-ng-free=y
CONFIG_PACKAGE_procps-ng-kill=y
CONFIG_PACKAGE_procps-ng-pgrep=y
CONFIG_PACKAGE_procps-ng-pkill=y
CONFIG_PACKAGE_procps-ng-pmap=y
CONFIG_PACKAGE_procps-ng-ps=y
CONFIG_PACKAGE_procps-ng-pwdx=y
CONFIG_PACKAGE_procps-ng-skill=y
CONFIG_PACKAGE_procps-ng-slabtop=y
CONFIG_PACKAGE_procps-ng-snice=y
CONFIG_PACKAGE_procps-ng-tload=y
CONFIG_PACKAGE_procps-ng-top=y
CONFIG_PACKAGE_procps-ng-uptime=y
CONFIG_PACKAGE_procps-ng-vmstat=y
CONFIG_PACKAGE_procps-ng-w=y
CONFIG_PACKAGE_procps-ng-watch=y
CONFIG_PACKAGE_ptp-utils=y
CONFIG_PACKAGE_rsync=y
CONFIG_PACKAGE_snmpd=y
CONFIG_PACKAGE_tcpdump=y
CONFIG_PACKAGE_terminfo=y
CONFIG_PACKAGE_wget=y
CONFIG_PACKAGE_wireless-tools=y
CONFIG_PACKAGE_zlib=y
CONFIG_RSYNC_zlib=y

My uci show looks like this (system and wireless elided):

alfred.alfred=alfred
alfred.alfred.mode='master'
alfred.alfred.batmanif='bat0'
alfred.alfred.start_vis='1'
alfred.alfred.run_facters='1'
alfred.alfred.interface='br-pub'
alfred.alfred.disabled='0'
batman-adv.bat0=mesh
batman-adv.bat0.bridge_loop_avoidance='0'
dropbear.@dropbear[0]=dropbear
dropbear.@dropbear[0].PasswordAuth='on'
dropbear.@dropbear[0].RootPasswordAuth='on'
dropbear.@dropbear[0].Port='22'
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.pub=interface
network.pub.type='bridge'
network.pub.proto='static'
network.pub.ip6assign='60'
network.pub.ifname='bat0'
network.pub.ipaddr='10.11.x.y'
network.pub.netmask='255.255.252.0'
network.pub.gateway='10.11.x.1'
network.pub.dns='10.11.x.1'
network.mesh=interface
network.mesh.mtu='1532'
network.mesh.proto='batadv'
network.mesh.mesh='bat0'
network.meshwire=interface
network.meshwire.proto='batadv'
network.meshwire.mesh='bat0'
network.meshwire.ifname='eth0'
09.03.2017611Base systemBug ReportVery LowHighdnsmasq Ignore resolv file option forget at restartAllUnconfirmed Task Description

If you set up dnsmasq to ignore resolv file it will ignore it until reboot is performed. To make ignore it again the option must be uncheck and apply and then check and apply again.

I have /etc/resolv.conf as a symlink to /tmp/resolv.conf, when the router boots up the contents are the dns offered from dhcp over the wan interface. When the ignore resolv option is checked or unchecked the contens are overwrited to search lan and nameserver 127.0.0.1 but it doesn’t seems to affect as if you uncheck ignore resolv the router resolv names, and when you check again the option it can resolv names even the contents still are search lan and nameserver 127.0.0.1.

I haven’t seen yet any other change that can cause the reboot to make dnsmasq follow resolv file when the option is checked until you uncheck-apply and check-apply.

09.03.2017612Base systemBug ReportVery LowHighWAN to LAN leakage on MT7620 devicesTrunkUnconfirmed Task Description

I am currently testing two MT7620 devices - the ZBT WE826 and the Sanlinking D240. During the first seconds of the boot, I see that packets leak between the WAN and LAN ports. Typically, this results in clients receiving a DHCP reply from my upstream router, rendering the clients without connectivity when the switch is properly initialized. I have also tested with the default firmware and do not see this behavior. Also, if I stop the devices in the bootloader, then packets do not leak until I resume boot again.

In order to try to solve this bug, I have tried to port some (at least to me) missing steps from the bootloader switch code and to the mt7620 switch driver in LEDE. This did not have an effect, at least not on the packet leak. A work-around I have found is to update u-boot and remove the input delay, so that the device will boot immediately. However, this is quite cumbersome to install and not very reliable. I suspect my luck with this work-around is more due to the timing of the DHCP clients in Ubuntu and Windows 10.

Does anyone have any idea as to what could be wrong and where to start looking?

Thanks in advance for any help.

 


17.04.2017714Base systemBug ReportVery LowHighARP/Broadcast does not reach other clients in the same ...AllUnconfirmed Task Description

I have the default bridge with ethernet and WLAN in it. When i try to send data from a client to another, both connected to the same WLAN SSID, it doesn’t work (Destination unreachable).
Wireshark shows that it sends endless ARP requests to Broadcast, but the other clients in that WLAN never get it (and therefore can’t answer). The broadcast gets still delivery to every client connected through Ethernet. If i create a second WLAN SSID (even on the same adapter) and and add it to the bridge, it gets also all broadcast packets from the other WLAN...
So if i put the 2 clients in different WLAN SSIDs or ethernet they get the broadcast from each other, but not when both are connected to the same.

The isolate option is not set in the wireless config.
Archer C5 v1 with latest LEDE snapshot (no difference to 17.01 stable or rc).

19.04.2017717Base systemBug ReportVery LowHighWRT3200ACM USB 3.0 ProblemAllUnconfirmed Task Description

I can´t get my Seagate Expansion Portable 1TB STEA1000400 USB3.0 drive to be be recognized on the USB 3.0 port of the router after a reboot or cold start on WRT3200 but if i remove and hotplug the drive, it is automatically detected and can be mounted.
It happens with images from Openwrt 15.05.1, LEDE 17.01.1 and many snapshots from both projects that i have installed. I have no problem with another usb2.0 drive from Samsung that is installed in another USB2.0 port.

After Cold START or REBOOT

 root@LEDE:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.20 (ag33e33@ubuntu) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3963-7ae58be) ) #0 SMP Wed Apr 12 16:12:18 2017
[    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: Linksys WRT3200ACM
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0646900, node_mem_map dfbf9000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] percpu: Embedded 13 pages/cpu @dfbce000 s22732 r8192 d22324 u53248
[    0.000000] pcpu-alloc: s22732 r8192 d22324 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,128K(u_env),256K(s_env),256K@8064K(devinfo),1920K@8320K(sysdiag),80m@10m(kernel),74m@16m(rootfs),80m@90m(alt_kernel),74m@96m(alt_rootfs),160m@10m(ubifs),-@170m(syscfg)
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512848K/524288K available (4545K kernel code, 180K rwdata, 1244K rodata, 280K init, 310K bss, 11440K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
                   lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0xc0008000 - 0xc0478918   (4547 kB)
                     .init : 0xc05d4000 - 0xc061a000   ( 280 kB)
                     .data : 0xc061a000 - 0xc0647200   ( 181 kB)
                      .bss : 0xc0647200 - 0xc0694a00   ( 310 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000000] Selected CPU frequency (16) unsupported
[    0.000000] Switching to timer-based delay loop, resolution 40ns
[    0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
[    0.000008] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000114] Calibrating local timer... 933.22MHz.
[    0.060032] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.060037] pid_max: default: 32768 minimum: 301
[    0.060076] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.060079] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.060274] CPU: Testing write buffer coherency: ok
[    0.060365] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.060376] Setting up static identity map for 0x8280 - 0x82d8
[    0.060434] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[    0.060494] mvebu-pmsu: Initializing Power Management Service Unit
[    0.060904] Booting CPU 1
[    0.061041] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.061070] Brought up 2 CPUs
[    0.061075] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[    0.061078] CPU: All CPU(s) started in SVC mode.
[    0.062739] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.062790] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.062796] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.062831] pinctrl core: initialized pinctrl subsystem
[    0.063142] NET: Registered protocol family 16
[    0.063575] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.090041] cpuidle: using governor ladder
[    0.090171] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    0.090177] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    0.120467] reg-fixed-voltage xhci0-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/xhci0-vbus-pins, deferring probe
[    0.120607] SCSI subsystem initialized
[    0.120687] libata version 3.00 loaded.
[    0.120790] usbcore: registered new interface driver usbfs
[    0.120815] usbcore: registered new interface driver hub
[    0.120835] usbcore: registered new device driver usb
[    0.121329] clocksource: Switched to clocksource armada_370_xp_clocksource
[    0.121647] NET: Registered protocol family 2
[    0.121869] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.121890] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.121920] TCP: Hash tables configured (established 4096 bind 4096)
[    0.121941] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.121952] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.122009] NET: Registered protocol family 1
[    0.122021] PCI: CLS 0 bytes, default 64
[    0.122803] Crashlog allocated RAM at address 0x3f00000
[    0.122877] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.124945] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.124953] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.125699] io scheduler noop registered
[    0.125703] io scheduler deadline registered (default)
[    0.126071] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    0.126671] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[    0.126679] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    0.126683] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[    0.126687] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.126701] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[    0.126784] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[    0.126859] PCI: bus0: Fast back to back transfers disabled
[    0.126864] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.126870] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.126918] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000
[    0.126933] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref]
[    0.126943] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref]
[    0.127002] pci 0000:01:00.0: supports D1 D2
[    0.127005] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.127068] PCI: bus1: Fast back to back transfers disabled
[    0.127073] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.127132] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000
[    0.127151] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref]
[    0.127162] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref]
[    0.127244] pci 0000:02:00.0: supports D1 D2
[    0.127246] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.127310] PCI: bus2: Fast back to back transfers disabled
[    0.127315] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    0.127384] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
[    0.127390] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
[    0.127396] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.127405] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[    0.127413] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.127418] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe02fffff]
[    0.127425] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[    0.127434] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
[    0.127443] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.127448] pci 0000:00:02.0:   bridge window [mem 0xe0400000-0xe06fffff]
[    0.127646] mv_xor f1060800.xor: Marvell shared XOR driver
[    0.181754] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    0.181840] mv_xor f1060900.xor: Marvell shared XOR driver
[    0.241717] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    0.241857] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.242621] console [ttyS0] disabled
[    0.262683] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A
[    0.983287] console [ttyS0] enabled
[    0.988691] loop: module loaded
[    0.992090] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    1.001176] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    1.010274] scsi host0: ahci-mvebu
[    1.013847] scsi host1: ahci-mvebu
[    1.017348] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[    1.025306] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[    1.033594] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[    1.041369] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[    1.047747] nand: AMD/Spansion S34ML02G2
[    1.051690] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[    1.059379] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
[    1.066556] Bad block table found at page 131008, version 0x01
[    1.072752] Bad block table found at page 130944, version 0x01
[    1.078863] 11 ofpart partitions found on MTD device pxa3xx_nand-0
[    1.085074] Creating 11 MTD partitions on "pxa3xx_nand-0":
[    1.090582] 0x000000000000-0x000000200000 : "u-boot"
[    1.095830] 0x000000200000-0x000000220000 : "u_env"
[    1.100951] 0x000000220000-0x000000260000 : "s_env"
[    1.106089] 0x0000007e0000-0x000000820000 : "devinfo"
[    1.111433] 0x000000820000-0x000000a00000 : "sysdiag"
[    1.116797] 0x000000a00000-0x000005a00000 : "kernel1"
[    1.122301] 0x000001000000-0x000005a00000 : "ubi"
[    1.127404] 0x000005a00000-0x00000aa00000 : "kernel2"
[    1.132905] 0x000006000000-0x00000aa00000 : "rootfs2"
[    1.138362] 0x00000aa00000-0x000010000000 : "syscfg"
[    1.143774] 0x000000260000-0x000000820000 : "unused_area"
[    1.149701] libphy: Fixed MDIO Bus: probed
[    1.154064] libphy: orion_mdio_bus: probed
[    1.158297] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[    1.166962] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:b9:ea:c0
[    1.175959] mvneta f1034000.ethernet eth1: Using random mac address a2:8d:5e:6d:ee:98
[    1.183881] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.190435] ehci-pci: EHCI PCI platform driver
[    1.194928] ehci-platform: EHCI generic platform driver
[    1.200245] ehci-orion: EHCI orion driver
[    1.204336] orion-ehci f1058000.usb: EHCI Host Controller
[    1.209765] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    1.217412] orion-ehci f1058000.usb: irq 37, io mem 0xf1058000
[    1.251329] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    1.257480] hub 1-0:1.0: USB hub found
[    1.261254] hub 1-0:1.0: 1 port detected
[    1.265551] usbcore: registered new interface driver usb-storage
[    1.271723] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[    1.279341] i2c /dev entries driver
[    1.294252] orion_wdt: Initial timeout 171 sec
[    1.298933] sdhci: Secure Digital Host Controller Interface driver
[    1.305146] sdhci: Copyright(c) Pierre Ossman
[    1.362546] ata1: SATA link down (SStatus 0 SControl 300)
[    1.367991] ata2: SATA link down (SStatus 0 SControl 300)
[    1.371354] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[    1.371428] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.377154] marvell-cesa f1090000.crypto: CESA device successfully registered
[    1.377556] NET: Registered protocol family 10
[    1.391590] NET: Registered protocol family 17
[    1.391604] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.391605] 8021q: 802.1Q VLAN Support v1.8
[    1.391661] Registering SWP/SWPB emulation handler
[    1.392791] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.392803] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[    1.392861] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    1.392881] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[    1.393134] hub 2-0:1.0: USB hub found
[    1.393160] hub 2-0:1.0: 1 port detected
[    1.393247] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.393253] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[    1.393292] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.393478] hub 3-0:1.0: USB hub found
[    1.393501] hub 3-0:1.0: 1 port detected
[    1.393820] UBI: auto-attach mtd6
[    1.393824] ubi0: attaching mtd6
[    1.397930] random: fast init done
[    1.401551] mmc0: new high speed SDIO card at address 0001
[    1.593092] ubi0: scanning is finished
[    1.601334] ubi0: attached mtd6 (name "ubi", size 74 MiB)
[    1.606756] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.613664] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.620479] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.627475] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0
[    1.633508] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    1.640759] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1419003487
[    1.649932] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 40
[    1.659197] ubi0: background thread "ubi_bgt0d" started, PID 668
[    1.659208] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    1.659643] block ubiblock0_0: created from ubi0:0(rootfs)
[    1.659645] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    1.659829] mvsw61xx 10.mvsw61xx: Found MV88E6352 at f1072004.mdio-mi:10
[    1.659832] mvsw61xx 10.mvsw61xx: Using direct addressing
[    1.671972] armada38x-rtc f10a3800.rtc: setting system clock to 2101-11-05 12:45:50 UTC (4160637950)
[    1.705850] Waiting 1 sec before mounting root device...
[    1.852932] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.859142] scsi host2: usb-storage 1-1:1.0
[    2.722974] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    2.730260] Freeing unused kernel memory: 280K (c05d4000 - c061a000)
[    2.736655] This architecture does not have kernel memory protection.
[    2.855724] init: Console is alive
[    2.859203] init: - watchdog -
[    2.924338] scsi 2:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
[    3.111498] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.151660] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.159777] sd 2:0:0:0: [sda] Write Protect is off
[    3.164597] sd 2:0:0:0: [sda] Mode Sense: 28 00 00 00
[    3.165152] sd 2:0:0:0: [sda] No Caching mode page found
[    3.170490] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    3.179038]  sda: sda1
[    3.183653] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.188738] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.195221] ohci-platform: OHCI generic platform driver
[    3.200902] uhci_hcd: USB Universal Host Controller Interface driver
[    3.207556] ohci-pci: OHCI PCI platform driver
[    3.212156] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.228593] init: - preinit -
[    3.422394] mvneta f1070000.ethernet tmp0: renamed from eth0
[    3.462586] mvneta f1034000.ethernet eth0: renamed from eth1
[    3.512510] mvneta f1070000.ethernet eth1: renamed from tmp0
[    3.833291] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[    3.840562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.846607] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[    3.854578] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.909798] mount_root: loading kmods from internal overlay
[    5.921475] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    5.929503] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    6.328768] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 806
[    6.357145] UBIFS (ubi0:1): recovery needed
[    6.403932] random: crng init done
[    6.431762] UBIFS (ubi0:1): recovery completed
[    6.436249] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    6.444117] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.454076] UBIFS (ubi0:1): FS size: 61329408 bytes (58 MiB, 483 LEBs), journal size 3047424 bytes (2 MiB, 24 LEBs)
[    6.464556] UBIFS (ubi0:1): reserved for root: 2896739 bytes (2828 KiB)
[    6.471198] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DEE50754-EFFE-4990-A7A6-C97266C9BEF0, small LPT model
[    6.483473] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[    6.493882] block: extroot: not configured
[    6.531369] UBIFS (ubi0:1): un-mount UBI device 0
[    6.536097] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[    6.544028] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 809
[    6.591527] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    6.599392] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.609356] UBIFS (ubi0:1): FS size: 61329408 bytes (58 MiB, 483 LEBs), journal size 3047424 bytes (2 MiB, 24 LEBs)
[    6.619838] UBIFS (ubi0:1): reserved for root: 2896739 bytes (2828 KiB)
[    6.626483] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DEE50754-EFFE-4990-A7A6-C97266C9BEF0, small LPT model
[    6.641627] mount_root: loading kmods from internal overlay
[    6.652909] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[    6.670201] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[    7.078279] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[    7.086484] block: extroot: not configured
[    7.132013] mount_root: switching to ubifs overlay
[    7.176201] ubi1: attaching mtd9
[    7.407547] ubi1: scanning is finished
[    7.415742] ubi1: attached mtd9 (name "syscfg", size 86 MiB)
[    7.421435] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    7.428338] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    7.435155] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[    7.442148] ubi1: good PEBs: 680, bad PEBs: 8, corrupted PEBs: 0
[    7.448177] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    7.455430] ubi1: max/mean erase counter: 6/4, WL threshold: 4096, image sequence number: 1148089792
[    7.464603] ubi1: available PEBs: 0, total reserved PEBs: 680, PEBs reserved for bad PEB handling: 32
[    7.473869] ubi1: background thread "ubi_bgt1d" started, PID 824
[    7.485213] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 828
[    7.537764] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "syscfg"
[    7.545202] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.555161] UBIFS (ubi1:0): FS size: 80375808 bytes (76 MiB, 633 LEBs), journal size 4063232 bytes (3 MiB, 32 LEBs)
[    7.565642] UBIFS (ubi1:0): reserved for root: 3796347 bytes (3707 KiB)
[    7.572287] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A5EAB2F8-92D3-4D0B-A69A-9F6CA9A608B3, small LPT model
[    7.585463] urandom-seed: Seeding with /etc/urandom.seed
[    7.684142] procd: - early -
[    7.687055] procd: - watchdog -
[    8.315049] procd: - ubus -
[    8.371904] procd: - init -
[    8.546612] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.557859] tun: Universal TUN/TAP device driver, 1.6
[    8.562965] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    8.571391] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    8.580401] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.587876] cryptodev: driver 1.8 loaded.
[    8.592340] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[    8.600387] Backport generated by backports.git backports-20160324-13-g24da7d3c
[    8.615059] <<Marvell 802.11ac Wireless Network Driver version 10.3.2.0-20170110>>
[    8.622702] pci 0000:00:01.0: enabling device (0140 -> 0142)
[    8.628443] ieee80211 phy0: priv->iobase0 = e0f80000
[    8.628454] ieee80211 phy0: priv->iobase1 = e1200000
[    8.628463] ieee80211 phy0: priv->pcmd_buf = ddf08000  priv->pphys_cmd_buf = 1df08000
[    8.636458] ieee80211 phy0: fw download start
[    8.699990] ieee80211 phy0: FwSize = 207660 downloaded Size = 207660 curr_iteration 65522
[   12.431324] ieee80211 phy0: fw download complete
[   12.431783] ieee80211 phy0: pcmd = ddf08000
[   12.449817] ieee80211 phy0: firmware version: 0x7080004
[   12.809338] ieee80211 phy0: firmware region code: 10
[   12.851995] ieee80211 phy0: 2G disabled, 5G enabled
[   12.856895] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[   12.862298] pci 0000:00:02.0: enabling device (0140 -> 0142)
[   12.868032] ieee80211 phy1: priv->iobase0 = e1380000
[   12.868043] ieee80211 phy1: priv->iobase1 = e1600000
[   12.868052] ieee80211 phy1: priv->pcmd_buf = dddf0000  priv->pphys_cmd_buf = 1ddf0000
[   12.874418] ieee80211 phy1: fw download start
[   12.939175] ieee80211 phy1: FwSize = 207660 downloaded Size = 207660 curr_iteration 65527
[   14.327325] ieee80211 phy1: fw download complete
[   14.327812] ieee80211 phy1: pcmd = dddf0000
[   14.345344] ieee80211 phy1: firmware version: 0x7080004
[   14.706323] ieee80211 phy1: firmware region code: 10
[   14.750021] ieee80211 phy1: 2G enabled, 5G disabled
[   14.754934] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[   14.762803] u32 classifier
[   14.765522]     input device check on
[   14.769196]     Actions configured
[   14.773037] Mirror/redirect action on
[   14.778285] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[   14.790080] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.799009] mwifiex: rx work enabled, cpus 2
[   14.846998] usbcore: registered new interface driver ums-alauda
[   14.853672] usbcore: registered new interface driver ums-cypress
[   14.860218] usbcore: registered new interface driver ums-datafab
[   14.866723] usbcore: registered new interface driver ums-freecom
[   14.873187] usbcore: registered new interface driver ums-isd200
[   14.879542] usbcore: registered new interface driver ums-jumpshot
[   14.886112] usbcore: registered new interface driver ums-karma
[   14.892282] usbcore: registered new interface driver ums-sddr09
[   14.898499] usbcore: registered new interface driver ums-sddr55
[   14.904752] usbcore: registered new interface driver ums-usbat
[   14.917781] xt_time: kernel timezone is -0000
[   14.925132] PPP generic driver version 2.4.2
[   14.929843] NET: Registered protocol family 24
[   14.935112] kmodloader: done loading kernel modules from /etc/modules.d/*
[   15.469997] mwifiex_sdio mmc0:0001:1: info: FW download over, size 391772 bytes
[   15.831665] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[   15.864262] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x242 error, result=0x2
[   15.871261] mwifiex_sdio mmc0:0001:1: mwifiex_process_cmdresp: cmd 0x242 failed during       initialization
[   15.890625] mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.7.p5)
[   15.898674] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.68.7.p5)
[   16.052347] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[   16.059309] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.065375] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   16.073372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   16.081683] br-lan: port 1(eth0.1) entered blocking state
[   16.087106] br-lan: port 1(eth0.1) entered disabled state
[   16.092675] device eth0.1 entered promiscuous mode
[   16.097485] device eth0 entered promiscuous mode
[   16.103227] br-lan: port 1(eth0.1) entered blocking state
[   16.108650] br-lan: port 1(eth0.1) entered forwarding state
[   16.122758] mvneta f1070000.ethernet eth1: configuring for fixed link mode
[   16.130044] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   16.136169] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   16.144170] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   16.342477] pppoe-wan: renamed from ppp0
[   16.900336] ieee80211 phy1: change: 0xffffffff
[   17.006509] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   17.137396] ieee80211 phy0: change: 0xffffffff
[   17.271596] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.277594] br-lan: port 2(wlan1) entered blocking state
[   17.282955] br-lan: port 2(wlan1) entered disabled state
[   17.288408] device wlan1 entered promiscuous mode
[   17.293166] br-lan: port 2(wlan1) entered blocking state
[   17.298502] br-lan: port 2(wlan1) entered forwarding state
[   17.304255] br-lan: port 2(wlan1) entered disabled state
[   17.309734] br-lan: port 3(wlan0) entered blocking state
[   17.315091] br-lan: port 3(wlan0) entered disabled state
[   17.320543] device wlan0 entered promiscuous mode
[   17.327109] ieee80211 phy0: change: 0x100
[   17.344423] ieee80211 phy0: change: 0x40
[   17.380440] ieee80211 phy1: change: 0x100
[   17.392530] ieee80211 phy1: change: 0x42
[   17.593821] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   17.600257] br-lan: port 2(wlan1) entered blocking state
[   17.605603] br-lan: port 2(wlan1) entered forwarding state
[   17.611269] ieee80211 phy0: change: 0x40
[   17.671185] ieee80211 phy1: change: 0x20
[   17.861365] ieee80211 phy0: change: 0x40
[   17.993370] ieee80211 phy0: change: 0x100
[   18.060535] ieee80211 phy0: change: 0x100
[   18.073629] ieee80211 phy0: change: 0x42
[   18.341340] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   18.347812] br-lan: port 3(wlan0) entered blocking state
[   18.353170] br-lan: port 3(wlan0) entered forwarding state
 root@LEDE:~# lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04e8:1f05 Samsung Electronics Co., Ltd S2 Portable [JMicron] (500GB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

After i remove the cable and hotplug i get this additional lines in DMESG:

 #
[  527.103849] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
[  527.134880] usb-storage 3-1:1.0: USB Mass Storage device detected
[  527.141155] scsi host3: usb-storage 3-1:1.0
[  528.154087] scsi 3:0:0:0: Direct-Access     Seagate  Expansion        1805 PQ: 0 ANSI: 6
[  529.455313] sd 3:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[  529.463210] sd 3:0:0:0: [sdb] Write Protect is off
[  529.468032] sd 3:0:0:0: [sdb] Mode Sense: 33 00 00 08
[  529.473381] sd 3:0:0:0: [sdb] No Caching mode page found
[  529.478724] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  529.499962]  sdb: sdb1 sdb2
[  529.503903] sd 3:0:0:0: [sdb] Attached SCSI disk
[  612.132851] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts:
root@LEDE:~# lsusb
Bus 003 Device 002: ID 0bc2:231b Seagate RSS LLC
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04e8:1f05 Samsung Electronics Co., Ltd S2 Portable [JMicron] (500GB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub 


25.07.2017931Base systemBug ReportVery LowHighOnboard Bluetooth not working on Raspberry Pi 3 BAllAssigned Task Description

I have tried LEDE 17.01.1 and 17.01.2 and i can’t get bluetooth running on raspberry pi 3.

It will not flash the firmware for the bluetooth controller on rpi3, when device is brought up:

root@LEDE:~# /usr/bin/hciattach /dev/ttyAMA0 bcm43xx 921600 noflow -
bcm43xx_init
Patch not found for BCM43430A1, continue anyway
Set Controller UART speed to 921600 bit/s
Device setup complete

Instead of patch not found it should produce:
Flash firmware /lib/firmware/brcm/BCM43430A1.hcd

I could not find this firmware via opkg, so i used a file from OpenELEC at
https://github.com/OpenELEC/misc-firmware/tree/master/firmware/brcm

This however won’t load and bluetooth is not initialized correctly and unusable:

root@LEDE:~# /usr/bin/hciattach /dev/ttyAMA0 bcm43xx 921600 noflow -
bcm43xx_init
Flash firmware /lib/firmware/brcm/BCM43430A1.hcd
Initialization timed out

 


03.08.2017948PackagesBug ReportVery LowHighlua: on 64bit targets integer number truncation may occ...AllUnconfirmed Task Description

On 64bit target implementations (eg x86_64) and with LNUM on int32
mode (default), assignation of an integer number greater than
UINT_MAX (ie 4294967295), but lesser or equal than UINT_MAX +
0x7FFFFFFF + 1 (ie 6442450943) to a variable does result in
truncation of the final value stored in memory.

E.g.:

   > n=4294967296; print(n)
   0
   > n=6442450943; print(n)
   2147483647

Cause:
LNUM does perform a C-Style cast in the intermediate function wrapper
used to check for the fitness of numbers. This cast is not only unnecessary
but also brings on undefined behaviour on 64bit target implementations
where INT’s and LONG’s are of size 32 and 64bit respectively.

Fix:
Removal of the unnecessary cast in wrapper does bring back the ‘overflow detection’.

Regards, Víctor Calvís.

19.10.20171076PackagesBug ReportVery LowHighBugs about QCA9886AllWaiting on reporter Task Description

Supply the following if possible:
- Device problem occurs on archer-c58-v1
- Software versions of LEDE release is the latest master version, and other versions have same bug.

  I noticed the memory is leaking after connected serveral devices with QCA9886,

that will cause system crash in the end. Before leaking, WIFI can work fine, but when memory is leaking, WIFI can not work anymore.

  My OS is latest lede(mac80211 version is backports-2017-10-06), 

and the board can work with QSDK.

  If you need more detail information, please let me know.
 


20.10.20171087KernelBug ReportVery LowHighLEDE snaphost: sunxi cortex-a7, BanaPi target: USB not ...TrunkUnconfirmed Task Description

Hi all
With snapshot r5117-fbde9ac, at least on a bananapi (cortex-a7) the USB ports are down, apparently there is some problem with VBUS (maybe DT problem?)
Here the dmesg after boot

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.57 (buildbot@builds) (gcc version 5.5.0 (LEDE GCC 5.5.0 r5092-0d5c1d7) ) #0 SMP PREEMPT Wed Oct 18 21:26:15 2017
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=30c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: LeMaker Banana Pi
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 261738
[    0.000000] free_area_init_node: node 0, pgdat c0689140, node_mem_map ef7fa000
[    0.000000]   Normal zone: 1536 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 65130 pages, LIFO batch:15
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 14 pages/cpu @ef7c2000 s25036 r8192 d24116 u57344
[    0.000000] pcpu-alloc: s25036 r8192 d24116 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260202
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1030724K/1046952K available (4564K kernel code, 254K rwdata, 1384K rodata, 304K init, 282K bss, 16228K reserved, 0K cma-reserved, 260520K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc047d4b0   (4566 kB)
[    0.000000]       .init : 0xc05fe000 - 0xc064a000   ( 304 kB)
[    0.000000]       .data : 0xc064a000 - 0xc0689a40   ( 255 kB)
[    0.000000]        .bss : 0xc068b000 - 0xc06d1874   ( 283 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000019] Switching to timer-based delay loop, resolution 41ns
[    0.000528] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000769] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns
[    0.000939] Console: colour dummy device 80x30
[    0.000973] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000988] pid_max: default: 32768 minimum: 301
[    0.001112] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001123] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001736] CPU: Testing write buffer coherency: ok
[    0.002074] /cpus/cpu@0 missing clock-frequency property
[    0.002095] /cpus/cpu@1 missing clock-frequency property
[    0.002108] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002131] Setting up static identity map for 0x400082c0 - 0x40008318
[    0.170429] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.170531] Brought up 2 CPUs
[    0.170553] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.170561] CPU: All CPU(s) started in HYP mode.
[    0.170567] CPU: Virtualization extensions available.
[    0.181241] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[    0.181967] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.181997] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.182161] pinctrl core: initialized pinctrl subsystem
[    0.183759] NET: Registered protocol family 16
[    0.184099] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.186420] No ATAGs?
[    0.252339] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
[    0.252404] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[    0.252440] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[    0.253608] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe
[    0.254616] SCSI subsystem initialized
[    0.254990] libata version 3.00 loaded.
[    0.255707] usbcore: registered new interface driver usbfs
[    0.255854] usbcore: registered new interface driver hub
[    0.256010] usbcore: registered new device driver usb
[    0.256383] Linux video capture interface: v2.00
[    0.256631] pps_core: LinuxPPS API ver. 1 registered
[    0.256641] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.256729] PTP clock support registered
[    0.257496] Advanced Linux Sound Architecture Driver Initialized.
[    0.258937] clocksource: Switched to clocksource arch_sys_counter
[    0.260189] simple-framebuffer 7fe79000.framebuffer: framebuffer at 0x7fe79000, 0x178e00 bytes, mapped to 0xf0900000
[    0.260208] simple-framebuffer 7fe79000.framebuffer: format=x8r8g8b8, mode=656x536x32, linelength=2880
[    0.267397] Console: switching to colour frame buffer device 82x33
[    0.273147] simple-framebuffer 7fe79000.framebuffer: fb0: simplefb registered!
[    0.285894] NET: Registered protocol family 2
[    0.286811] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.286911] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.287040] TCP: Hash tables configured (established 8192 bind 8192)
[    0.287131] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.287195] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.287430] NET: Registered protocol family 1
[    0.287817] kvm [1]: 8-bit VMID
[    0.287830] kvm [1]: IDMAP page: 40009000
[    0.287838] kvm [1]: HYP VA range: c0000000:ffffffff
[    0.288171] kvm [1]: Hyp mode initialized successfully
[    0.288246] kvm [1]: vgic-v2@1c84000
[    0.288431] kvm [1]: vgic interrupt IRQ16
[    0.288462] kvm [1]: virtual timer IRQ20
[    0.290814] No memory allocated for crashlog
[    0.291097] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[    0.301800] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.314490] bounce: pool size: 64 pages
[    0.314510] io scheduler noop registered
[    0.314518] io scheduler deadline registered
[    0.314823] io scheduler cfq registered (default)
[    0.315575] sun4i-usb-phy 1c13400.phy: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_id_detect_pin@0, deferring probe
[    0.320516] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.422164] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.428293] console [ttyS0] disabled
[    0.448607] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
[    1.110648] console [ttyS0] enabled
[    1.138088] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
[    1.170870] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 47, base_baud = 1500000) is a U6_16550A
[    1.229167] loop: module loaded
[    1.234708] libphy: Fixed MDIO Bus: probed
[    1.239475] sun7i-dwmac 1c50000.ethernet: PTP uses main clock
[    1.245231] sun7i-dwmac 1c50000.ethernet: no reset control found
[    1.252200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.258730] ehci-platform: EHCI generic platform driver
[    1.264410] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.270651] ohci-platform: OHCI generic platform driver
[    1.276342] usbcore: registered new interface driver usb-storage
[    1.282746] mousedev: PS/2 mouse device common for all mice
[    1.289486] i2c /dev entries driver
[    1.295415] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.305385] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    1.389162] sunxi-mmc 1c0f000.mmc: base:0xf08db000 irq:28
[    1.395627] sun4i-ss 1c15000.crypto-engine: no reset control found
[    1.403543] sun4i-ss 1c15000.crypto-engine: Die ID 0
[    1.414955] NET: Registered protocol family 10
[    1.424080] NET: Registered protocol family 17
[    1.428624] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.441620] can: controller area network core (rev 20120528 abi 9)
[    1.448031] NET: Registered protocol family 29
[    1.452516] 8021q: 802.1Q VLAN Support v1.8
[    1.456824] Registering SWP/SWPB emulation handler
[    1.471934] sun7i-dwmac 1c50000.ethernet: PTP uses main clock
[    1.477695] sun7i-dwmac 1c50000.ethernet: no reset control found
[    1.491416] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.502100] mmc0: new high speed SDHC card at address b368
[    1.518287] mmcblk0: mmc0:b368       3.75 GiB
[    1.523991]  mmcblk0: p1 p2
[    1.599006] sun7i-dwmac 1c50000.ethernet: Ring mode enabled
[    1.604587] sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported
[    1.611833] sun7i-dwmac 1c50000.ethernet: Normal descriptors
[    1.625337] libphy: stmmac: probed
[    1.628759] sun7i-dwmac 1c50000.ethernet (unnamed net_device) (uninitialized): PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    1.640432] sun7i-dwmac 1c50000.ethernet (unnamed net_device) (uninitialized): PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    1.654246] hctosys: unable to open rtc device (rtc0)
[    1.660155] vcc3v0: disabling
[    1.663134] vcc5v0: disabling
[    1.666099] usb0-vbus: disabling
[    1.669415] usb1-vbus: disabling
[    1.672648] usb2-vbus: disabling
[    1.675876] ALSA device list:
[    1.678840]   No soundcards found.
[    1.684092] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.693047] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.705706] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[    1.713316] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.720717] Freeing unused kernel memory: 304K
[    1.725156] This architecture does not have kernel memory protection.
[    1.808884] init: Console is alive
[    1.812591] init: - watchdog -
[    1.991859] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.109062] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[    2.116602] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[    2.122530] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    2.131547] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[    2.140601] scsi host0: ahci-sunxi
[    2.144486] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 33
[    2.480406] ata1: SATA link down (SStatus 0 SControl 300)
[    2.497140] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.514855] init: - preinit -
[    2.661278] random: jshn: uninitialized urandom read (4 bytes read)
[    2.692999] random: jshn: uninitialized urandom read (4 bytes read)
[    2.715326] random: jshn: uninitialized urandom read (4 bytes read)
[    2.738512] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=-1)
[    2.850208] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabled
[    2.857528] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters available
[    2.865213] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW
[    2.873355] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.973285] mount_root: mounting /dev/root
[    5.980967] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.013747] random: fast init done
[    6.249292] random: crng init done
[    6.398432] urandom-seed: Seeding with /etc/urandom.seed
[    6.439739] procd: - early -
[    6.442722] procd: - watchdog -
[    7.304303] procd: - watchdog -
[    7.307745] procd: - ubus -
[    7.362615] procd: - init -
[    7.508699] kmodloader: loading kernel modules from /etc/modules.d/*
[    7.518215] tun: Universal TUN/TAP device driver, 1.6
[    7.523343] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    7.536218] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    7.547403] nat46: module (version 683fbd2b765506332a1af141545652bf58f03166) loaded.
[    7.559700] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.579497] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    7.608815] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[    7.615784] sunxi-rtc 1c20d00.rtc: RTC enabled
[    7.634093] Loading modules backported from Linux version wt-2017-10-06-0-ga7a22fbbd1f0
[    7.642374] Backport generated by backports.git v4.14-rc2-1-6-gedfb595c
[    7.651300] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.683086] xt_time: kernel timezone is -0000
[    7.721723] PPP generic driver version 2.4.2
[    7.727180] NET: Registered protocol family 24
[    7.738129] usbcore: registered new interface driver rtl8xxxu
[    7.766983] usbcore: registered new interface driver rt2800usb
[    7.777447] usbcore: registered new interface driver ath9k_htc
[    7.783580] kmodloader: done loading kernel modules from /etc/modules.d/*
[   10.097688] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=-1)
[   10.110360] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabled
[   10.117709] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters available
[   10.125620] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW
[   10.132954] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.148402] br-lan: port 1(eth0.2) entered blocking state
[   10.153968] br-lan: port 1(eth0.2) entered disabled state
[   10.160321] device eth0.2 entered promiscuous mode
[   10.165148] device eth0 entered promiscuous mode
[   10.174920] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   10.235364] IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready
[   10.498273] IPv6: ADDRCONF(NETDEV_UP): tayga-nat64: link is not ready
[   10.566999] IPv6: ADDRCONF(NETDEV_CHANGE): tayga-nat64: link becomes ready
[   14.329769] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   14.337986] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.345064] br-lan: port 1(eth0.2) entered blocking state
[   14.350507] br-lan: port 1(eth0.2) entered forwarding state
[   14.356467] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.3: link becomes ready
[   14.363451] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

 


23.10.20171102KernelBug ReportVery LowHighKernel crash on mt7621 at mm/slub.cTrunkUnconfirmed Task Description

I have recurrent crashes when using my wg3526 based on mt76 for long time. The wifi 2.4 ghz is activated (mt7603 driver), but 5ghz is not.

<4>[19202.879743] ------------[ cut here ]------------
<4>[19202.884402] WARNING: CPU: 3 PID: 0 at mm/slub.c:3843 ksize+0xe0/0xf8
<4>[19202.890789] Modules linked in: xt_coova pppoe ppp_async rtl8192cu rtl8192c_common rtl_usb pppox ppp_generic nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY slhc rtlwifi nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt em_cmp em_nbyte sch_dsmark sch_pie act_ipt sch_codel sch_gred em_meta sch_teql cls_basic sch_prio em_text sch_sfq act_police sch_fq sch_red
<4>[19202.961498]  act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress mt7603e ledtrig_usbport mt76 mac80211 cfg80211 compat xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables tun mmc_block usb_storage mtk_sd mmc_core leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd ahci libahci libata sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc32c_generic [last unloaded: xt_coova]<4>[19203.032447] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G        W       4.9.54 #0
<4>[19203.039549] Stack : 00000000 00000000 80557b2a 00000041 80406a24 00000000 00000000 80550000
<4>[19203.047897]         8fc5499c 804ebea7 80482c5c 00000003 00000000 80553824 02080020 8fd3705c
<4>[19203.056241]         804e95fc 8006b878 00000001 80550000 804f1fa4 804f1fa8 80487844 8fc21ce0
<4>[19203.064589]         00000003 800a9fd0 02080020 8fd3705c 0000329a 00000007 8f21db00 00c21ce0
<4>[19203.072937]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[19203.081299]         ...
<4>[19203.083744] Call Trace:
<4>[19203.086218] [<8000f814>] show_stack+0x54/0x88
<4>[19203.090590] [<801df1cc>] dump_stack+0x8c/0xd0
<4>[19203.094939] [<8002bdc4>] __warn+0xe4/0x118
<4>[19203.099026] [<8002be8c>] warn_slowpath_null+0x1c/0x30
<4>[19203.104081] [<800e882c>] ksize+0xe0/0xf8
<4>[19203.107999] [<802d90d0>] pskb_expand_head+0x98/0x23c
<4>[19203.112958] [<8032aa28>] ip_forward+0x374/0x45c
<4>[19203.117474] [<803294c8>] ip_rcv+0x2b8/0x320
<4>[19203.121653] [<802e98d0>] __netif_receive_skb_core+0x718/0x970
<4>[19203.127384] [<802eb7bc>] process_backlog+0x9c/0x160
<4>[19203.132248] [<802eb55c>] net_rx_action+0x138/0x2fc
<4>[19203.137033] [<8002f924>] __do_softirq+0x294/0x2e0
<4>[19203.141726] [<8002fc18>] irq_exit+0x7c/0x98
<4>[19203.145913] [<8020e3d0>] plat_irq_dispatch+0xb4/0xdc
<4>[19203.150866] [<8000a968>] except_vec_vi_end+0xb8/0xc4
<4>[19203.155842] [<80064fc4>] cpu_startup_entry+0x104/0x170
<4>[19203.161091] ---[ end trace 09207f98d12feebb ]---
<4>[19203.165803] Kernel bug detected[#1]:
<1>[19203.165897] CPU 3 Unable to handle kernel paging request at virtual address 00004000, epc == 800eb628, ra == 800eb5ac
<4>[19203.179938] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W       4.9.54 #0
<4>[19203.187042] task: 804ebfa0 task.stack: 804dc000
<4>[19203.191547] $ 0   : 00000000 80550000 81026b40 00000001
<4>[19203.196767] $ 4   : 00000000 81026b53 000f0000 811da600
<4>[19203.201984] $ 8   : 804f0000 80584864 8fc0df54 8fc0df54
<4>[19203.207198] $12   : 11000000 ffffffff 00000000 0000002d
<4>[19203.212415] $16   : 8eaaa600 8ffa1308 8ffa1000 0000007d
<4>[19203.217631] $20   : 000000ca 0000003f 8ffa1308 00000018
<4>[19203.222846] $24   : 00000000 8000c30c                  
<4>[19203.228063] $28   : 804dc000 8fc0de3c ffffffff 802d5e00
<4>[19203.233278] Hi    : 00000003
<4>[19203.236139] Lo    : 00000000
<4>[19203.239036] epc   : 800e9b90 kfree+0x78/0x1a4
<4>[19203.243394] ra    : 802d5e00 __kfree_skb+0x14/0xa4
<4>[19203.248157] Status: 11008403      KERNEL EXL IE 
<4>[19203.252333] Cause : 50800034 (ExcCode 0d)
<4>[19203.256319] PrId  : 0001992f (MIPS 1004Kc)
<4>[19203.260389] Modules linked in: xt_coova pppoe ppp_async rtl8192cu rtl8192c_common rtl_usb pppox ppp_generic nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY slhc rtlwifi nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt em_cmp em_nbyte sch_dsmark sch_pie act_ipt sch_codel sch_gred em_meta sch_teql cls_basic sch_prio em_text sch_sfq act_police sch_fq sch_red
<4>[19203.330928]  act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress mt7603e ledtrig_usbport mt76 mac80211 cfg80211 compat xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables tun mmc_block usb_storage mtk_sd mmc_core leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd ahci libahci libata sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc32c_generic [last unloaded: xt_coova]Process swapper/0 (pid: 0, threadinfo=804dc000, task=804ebfa0, tls=00000000)
<4>[19203.408441] Stack : 000000ca 0000003f 8ffa1308 00000018 8ef712d8 802b0400 0003000f 802b2240
<4>[19203.416786]         8e245c60 8eaa10c0 00000000 aef74b40 00000001 8ffa14b8 000000c9 802b2658
<4>[19203.425131]         803f7afc 8149e440 802e6138 00000001 0000012b 80510000 804df9c0 00000001
<4>[19203.433476]         8fdc7900 00000001 80580000 0000000f 00030000 9bfe8000 01000000 00000010
<4>[19203.441822]         30000000 8009483c 0e245ca0 01000000 0f2d4480 00000004 00000040 804df9c0
<4>[19203.450167]         ...
<4>[19203.452603] Call Trace:
<4>[19203.455038] [<800e9b90>] kfree+0x78/0x1a4
<4>[19203.459038] [<802d5e00>] __kfree_skb+0x14/0xa4
<4>[19203.463475] [<802b0400>] fe_txd_unmap+0xd4/0xec
<4>[19203.467986] [<802b2658>] fe_poll+0x134/0x700
<4>[19203.472243] [<802eb55c>] net_rx_action+0x138/0x2fc
<4>[19203.477022] [<8002f924>] __do_softirq+0x294/0x2e0
<4>[19203.481705] [<8002fc18>] irq_exit+0x7c/0x98
<4>[19203.485882] [<8020e3d0>] plat_irq_dispatch+0xb4/0xdc
<4>[19203.490831] [<8000a968>] except_vec_vi_end+0xb8/0xc4
<4>[19203.495777] [<8000c324>] r4k_wait_irqoff+0x18/0x20
<4>[19203.500572] [<80064fc4>] cpu_startup_entry+0x104/0x170
<4>[19203.505712] [<80513be4>] start_kernel+0x47c/0x49c
<4>[19203.510392] Code: 30630001  24030001  38630001 <00030336> 8c430000  7c630380  10600003  00000000  10000002 
<4>[19203.520132] 
<4>[19203.521619] Oops[#2]:
<4>[19203.521836] ---[ end trace 09207f99d12feebb ]---

===================================
Time: 1508726234.629265
<0>[19203.526701] Kernel panic - not syncing: Fatal exception in interrupt
<4>[82713.077406] Stack : 00000000 00000000 80557b2a 00000041 80406a24 00000000 00000000 80550000
<4>[82713.085754]         804ec2bc 804ebea7 80482c5c 00000000 00000000 80553824 00000054 8f295a00
<4>[82713.094099]         00000000 8006b878 00000001 80550000 804f1fa4 804f1fa8 80487844 8fc0dd90
<4>[82713.102444]         00000003 800a9fd0 00000054 8f295a00 0000f7f3 00000007 00000000 00c0dd90
<4>[82713.110789]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[82713.119130]         ...
<4>[82713.121567] Call Trace:
<4>[82713.124029] [<8000f814>] show_stack+0x54/0x88
<4>[82713.128386] [<801df1cc>] dump_stack+0x8c/0xd0
<4>[82713.132727] [<8002bdc4>] __warn+0xe4/0x118
<4>[82713.136803] [<8002be8c>] warn_slowpath_null+0x1c/0x30
<4>[82713.141876] [<8f28c124>] mt7603_mac_fill_rx+0x2b0/0x3a8 [mt7603e]
<4>[82713.147957] [<8f28ae30>] mt7603_queue_rx_skb+0x9c/0xe4 [mt7603e]
<4>[82713.153958] [<8f284d6c>] mt76_dma_attach+0xa9c/0xc94 [mt76]
<4>[82713.159601] ---[ end trace 30529a2ab5a2f517 ]---
<4>[82713.164302] ------------[ cut here ]------------
<4>[82713.169064] WARNING: CPU: 0 PID: 0 at backports-2017-10-06/net/mac80211/rx.c:4321 ieee80211_rx_napi+0xa8/0x964 [mac80211]
<4>[82713.180018] Modules linked in: xt_coova pppoe ppp_async rtl8192cu rtl8192c_common rtl_usb pppox ppp_generic nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY slhc rtlwifi nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt em_cmp em_nbyte sch_dsmark sch_pie act_ipt sch_codel sch_gred em_meta sch_teql cls_basic sch_prio em_text sch_sfq act_police sch_fq sch_red
<4>[82713.250675]  act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress mt7603e ledtrig_usbport mt76 mac80211 cfg80211 compat xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables tun mmc_block usb_storage mtk_sd mmc_core leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd ahci libahci libata sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc32c_generic [last unloaded: xt_coova]<4>[82713.321600] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W       4.9.54 #0
<4>[82713.328698] Stack : 00000000 00000000 80557b2a 00000041 80406a24 00000000 00000000 80550000
<4>[82713.337045]         804ec2bc 804ebea7 80482c5c 00000000 00000000 80553824 00000001 8f295a00
<4>[82713.345391]         00000000 8006b878 00000001 80550000 804f1fa4 804f1fa8 80487844 8fc0dd38
<4>[82713.353736]         00000003 800a9fd0 00000001 8f295a00 0000f997 00000007 00000008 00c0dd38
<4>[82713.362081]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[82713.370424]         ...
<4>[82713.372859] Call Trace:
<4>[82713.375308] [<8000f814>] show_stack+0x54/0x88
<4>[82713.379658] [<801df1cc>] dump_stack+0x8c/0xd0
<4>[82713.383995] [<8002bdc4>] __warn+0xe4/0x118
<4>[82713.388071] [<8002be8c>] warn_slowpath_null+0x1c/0x30
<4>[82713.393195] [<8f325b94>] ieee80211_rx_napi+0xa8/0x964 [mac80211]
<4>[82713.399231] [<8f2858b4>] mt76_rx_complete+0x88/0x118 [mt76]
<4>[82713.404794] [<8f284e7c>] mt76_dma_attach+0xbac/0xc94 [mt76]
<4>[82713.410438] ---[ end trace 30529a2bb5a2f517 ]---
<4>[82715.996390] ------------[ cut here ]------------
<4>[82716.001062] WARNING: CPU: 3 PID: 0 at mm/slub.c:3843 ksize+0xe0/0xf8
<4>[82716.007380] Modules linked in: xt_coova pppoe ppp_async rtl8192cu rtl8192c_common rtl_usb pppox ppp_generic nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY slhc rtlwifi nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt em_cmp em_nbyte sch_dsmark sch_pie act_ipt sch_codel sch_gred em_meta sch_teql cls_basic sch_prio em_text sch_sfq act_police sch_fq sch_red
<4>[82716.078197]  act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress mt7603e ledtrig_usbport mt76 mac80211 cfg80211 compat xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables tun mmc_block usb_storage mtk_sd mmc_core leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd ahci libahci libata sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc32c_generic [last unloaded: xt_coova]<4>[82716.149239] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G        W       4.9.54 #0
<4>[82716.156343] Stack : 00000000 00000000 80557b2a 00000041 80406a24 00000000 00000000 80550000
<4>[82716.164705]         8fc5499c 804ebea7 80482c5c 00000003 00000000 80553824 8f3a4000 8edd5c80
<4>[82716.173065]         00000000 8006b878 00000001 80550000 804f1fa4 804f1fa8 80487844 8fc21940
<4>[82716.181427]         00000003 800a9fd0 8f3a4000 8edd5c80 0000fb43 00000007 8e826084 00c21940
<4>[82716.189786]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[82716.198143]         ...
<4>[82716.200587] Call Trace:
<4>[82716.203059] [<8000f814>] show_stack+0x54/0x88
<4>[82716.207424] [<801df1cc>] dump_stack+0x8c/0xd0
<4>[82716.211774] [<8002bdc4>] __warn+0xe4/0x118
<4>[82716.215861] [<8002be8c>] warn_slowpath_null+0x1c/0x30
<4>[82716.220915] [<800e882c>] ksize+0xe0/0xf8
<4>[82716.224832] [<802d90d0>] pskb_expand_head+0x98/0x23c
<4>[82716.229996] [<8f329150>] ieee80211_probereq_get+0xb48/0x190c [mac80211]
<4>[82716.236678] [<80064264>] __wake_up_common+0x64/0xb4
<4>[82716.241619] ---[ end trace 30529a2cb5a2f517 ]---
<4>[82716.246369] Kernel bug detected[#1]:
<1>[82716.246495] CPU 3 Unable to handle kernel paging request at virtual address 00004000, epc == 800eb628, ra == 800eb5ac
<4>[82716.260496] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W       4.9.54 #0
<4>[82716.267598] task: 804ebfa0 task.stack: 804dc000
<4>[82716.272101] $ 0   : 00000000 80550000 81026960 00000001
<4>[82716.277321] $ 4   : 00000000 81026973 000f0000 811cb400
<4>[82716.282538] $ 8   : 804f0000 801eb464 8fc0df54 8fc0df54
<4>[82716.287752] $12   : 11000000 00000000 00000000 00000005
<4>[82716.292968] $16   : 8d488000 8f295540 8ff23064 8f295b7c
<4>[82716.298183] $20   : 00000002 8f295b78 00000000 00000009
<4>[82716.303399] $24   : 00000000 8000c30c                  
<4>[82716.308613] $28   : 804dc000 8fc0de9c 802044f7 802d5e00
<4>[82716.313831] Hi    : 00000004
<4>[82716.316692] Lo    : 00000000
<4>[82716.319581] epc   : 800e9b90 kfree+0x78/0x1a4
<4>[82716.323940] ra    : 802d5e00 __kfree_skb+0x14/0xa4
<4>[82716.328701] Status: 11008403      KERNEL EXL IE 
<4>[82716.332884] Cause : 50800034 (ExcCode 0d)
<4>[82716.336872] PrId  : 0001992f (MIPS 1004Kc)
<4>[82716.340942] Modules linked in: xt_coova pppoe ppp_async rtl8192cu rtl8192c_common rtl_usb pppox ppp_generic nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY slhc rtlwifi nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt em_cmp em_nbyte sch_dsmark sch_pie act_ipt sch_codel sch_gred em_meta sch_teql cls_basic sch_prio em_text sch_sfq act_police sch_fq sch_red
<4>[82716.411537]  act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress mt7603e ledtrig_usbport mt76 mac80211 cfg80211 compat xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables tun mmc_block usb_storage mtk_sd mmc_core leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd ahci libahci libata sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc32c_generic [last unloaded: xt_coova]Process swapper/0 (pid: 0, threadinfo=804dc000, task=804ebfa0, tls=00000000)
<4>[82716.489176] Stack : 00000002 8f2955b0 8f295540 8ff23064 8f2955b0 8f2849f0 9bfe8000 8006d534
<4>[82716.497539]         8fc35480 00000001 00000000 00000000 00000000 00000000 00000070 804f0000
<4>[82716.505899]         00010000 8d488000 8df26790 00000001 8f295540 00000001 ffffffff 00000002
<4>[82716.514260]         00000000 804de040 00000100 0000000a 00000018 8f28ab70 80580000 80580000
<4>[82716.522625]         00000004 8006c99c 8f296188 8054121c 804e95fc 8003020c 00000006 8020f290
<4>[82716.530989]         ...
<4>[82716.533431] Call Trace:
<4>[82716.535883] [<800e9b90>] kfree+0x78/0x1a4
<4>[82716.539897] [<802d5e00>] __kfree_skb+0x14/0xa4
<4>[82716.544372] [<8f2849f0>] mt76_dma_attach+0x720/0xc94 [mt76]
<4>[82716.549930] Code: 30630001  24030001  38630001 <00030336> 8c430000  7c630380  10600003  00000000  10000002 
<4>[82716.559695] 
<4>[82716.561183] Oops[#2]:
<4>[82716.561433] ---[ end trace 30529a2db5a2f517 ]---

===================================
Time: 1508284734.35088
05.11.20171148Base systemBug ReportVery LowHighAR7 images for Fritz!Box 7170 build but do not bootTrunkUnconfirmed Task Description

Hi there,
I’m trying to get the latest LEDE with Kernel 4.9 up and running with an old Fritz!Box 7170 (ar7/EVA).
The images build fine but they are not booting at all.

Is someone able to help? I have tried to collect the “internet knowledge” about this device in this github.
I also found some very old OpenWRT patches (1)(2) for whom I don’t know if they were ever integrated in master.
I’m not a developer myself, so I don’t even know how to integrate patches to try them out.

I also created a forum thread if anyone has some more tips or ideas.

06.11.20171153Base systemFeature RequestVery LowHighConsider security monitoring featuresTrunkUnconfirmed Task Description

I see it as email notification about security events.

Examples of security events:

  • Attempts to bruteforce SSH password.
  • Appear unknown MAC’s in network.
  • Deauthentication attacks on Wi-Fi.

Monitoring is very important part of security.

25.11.20171192Base systemBug ReportVery LowHigh2.4Ghz wifi AP on mt7621 / Afoundry EW1200 doesn't workTrunkUnconfirmed Task Description

Hi LEDE folks!

I’m running the latest snapshot (r5406-5e6792e) of LEDE on an Afoundry EW1200. It’s a vast improvement from the stock firmware - my heartfelt gratitude to the author(s) of the port.

There’s one problem. 5Ghz wifi works fine but 2.4Ghz doesn’t. It detects my 2.4Ghz device and when I hit “scan” in LuCI it returns a list of nearby SSIDs.

But when I try to configure the device as an access point it isn’t visible to any of my devices. I’ve tried various channels / settings but nothing makes a difference.

Steps to reproduce:

1. Install LEDE r5406-5e6792e snapshot (latest at the time of writing) on an Afoundry EW1200
2. Use opkg to install LuCI [NB: I don’t think LuCI is to blame; it’s just the interface I use]
3. In Network/Wireless hit “Scan” for “Generic MAC80211 802.11bgn” and verify it can detect other people’s networks
4. Back in Network/Wireless, hit add (or edit) to configure an access point on that device. Use any settings you like.
5. LuCI shows the AP as running but no other device can detect the SSID it’s broadcasting.

22.01.20181286Base systemBug ReportVery LowHighNetwork startup happens too late with kernel 4.14TrunkUnconfirmed Task Description

Software version: r5917-36f1978a70-x86-64, device: x86-64 PC.

I’ve built 2 versions - one with default kernel 4.9 and another one with kernel 4.14.

The version with kernel 4.9 works fine. Netifd sets up network interfaces, after that another daemons are started.

The version with kernel 4.14 does not work as expected. Another daemons are started before network interface setup. In my case, this prevents the VPN server from working correctly. I have to manually restart VPN service after every reboot. This may potentially affect another software.

I have attached the log files. Please note the startup order as found in the log files:

kernel 4.9: netifd interface setup → block → dropbear → xl2tpd → openvpn
kernel 4.14: block → dropbear → xl2tpd → openvpn → netifd interface setup

I have no idea how a kernel version may affect the startup order. Maybe there is a kind of race condition.


29.01.20181311Base systemBug ReportVery LowHighprocd: mount /tmp with zramTrunkNew Task Description

Supply the following if possible:
- Device problem occurs on all device
- Software versions of OpenWrt/LEDE: Trunk

If i select this option in menuconfig, At the boot procd mount the wrong size of ram. I have 512mb of ram and procd mount only 11mb of ram. More detail here.
http://lists.infradead.org/pipermail/lede-dev/2018-January/011008.html

https://forum.lede-project.org/t/no-space-left-in-tmp/11000/14


01.02.20181317Base systemBug ReportVery LowHighom2p-lc sysupgrade fails silentlyTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on Openmesh om2p-lc
- Software versions of OpenWrt/LEDE release, packages, etc.
LEDE Reboot SNAPSHOT r5360-a8a23ca

- Steps to reproduce
sysupgrade -n /tmp/lede-ar71xx-generic-om2p-squashfs-sysupgrade.bin
Sysupgrade appears to go through the motions but firmware doesn’t upgrade and doesn’t delete config files with the -n switch.
I’ve tried the factory and the sysupgrade file with the same results. This build upgrades as expedted with a tl-mr3420-v2 and tl-wr740n-v4.

Not sure if it’s related but the om-watchdog init script also fails to detect the board type so doesn’t start.
Changing this line in the /etc/init.d/om-watchdog init script gets the watchdog to start which make me think it’s an identification issue.
local board=$(ar71xx_board_name)
change to
local board=$(cat /tmp/sysinfo/board_name)

 


11.02.20181347Base systemBug ReportVery LowHighAsus WL500GP V2 reboots when you`re trying to send fileAllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

I`m using Asus WL500GP V2 with Huawei E3372s with HiLink fw (I tested stick fw too). I`ve tried all LEDE versions. You can reproduce easily, just try to attach file to letter, or send file to cloud. 99% that router will reboot.

19.02.20181374PackagesBug ReportVery LowHighubox: logd memory leak AllUnconfirmed Task Description

I checked the use of memory with `top` command and saw that the logd was consuming memory disproportionately (around 60MB).

```
PID PPID USER STAT VSZ VSZ %CPU COMMAND
971 1 root S 59768 48% 0% /sbin/logd -S 64
```

- There was no remote log configured.
- I was using logread -f for a long time.
- When doing an /etc/init.d/log restart the consumed memory returned to normality.
- ubox version:

```
PKG_SOURCE_DATE:=2017-09-01
PKG_SOURCE_VERSION:=b1bc8d5fb874cdd22701a08d0fb0de4330f86814
PKG_MIRROR_HASH:=b07e750d941d691e2745aa3a058e504966b15d1db5636162dc686bad275eb296
```


16.03.20181437Base systemBug ReportVery LowHighTrunk r6421 not save configuration on ER3.TrunkUnconfirmed Task Description

Problem on ER3 r6421.

Flashing success, but not save configuration. Every time i'm reboot, router roll back to default config.

Here are serial output:

## Loading Linux kernel with entry point: 0xffffffff815efa20 ...
Bootloader: Done loading app on coremask: 0x3
[    0.000000] Linux version 4.14.25 (teq@teqdesk) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6302-0f54d96d24)) #0 SMP Sun Mar 18
[    0.000000] CVMSEG size: 2 cache lines (256 bytes)
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 000d0601 (Cavium Octeon+)
[    0.000000] Checking for the multiply/shift bug... no.
[    0.000000] Checking for the daddiu bug... no.
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 0000000005400000 @ 0000000002a00000 (usable)
[    0.000000]  memory: 0000000007c00000 @ 0000000008200000 (usable)
[    0.000000]  memory: 000000000fc00000 @ 0000000410000000 (usable)
[    0.000000]  memory: 0000000001826e20 @ 0000000001100000 (usable)
[    0.000000] Wasting 243712 bytes for tracking 4352 unused pages
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Using internal Device Tree.
[    0.000000] software IO TLB [mem 0x0398e000-0x0798e000] (64MB) mapped at [800000000398e000-800000000798dfff]
[    0.000000] Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
[    0.000000] Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000000000-0x00000000efffffff]
[    0.000000]   Normal   [mem 0x00000000f0000000-0x000000041fbfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000002925fff]
[    0.000000]   node   0: [mem 0x0000000002a00000-0x0000000007dfffff]
[    0.000000]   node   0: [mem 0x0000000008200000-0x000000000fdfffff]
[    0.000000]   node   0: [mem 0x0000000410000000-0x000000041fbfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000041fbfffff]
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 19 pages/cpu @80000000079f9000 s39344 r8192 d30288 u77824
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 126539
[    0.000000] Kernel command line: mtdparts=phys_mapped_flash:512k(boot0)ro,512k(boot1)ro,64k(eeprom)ro root=/dev/sda2 root0
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Memory: 396916K/513176K available (5086K kernel code, 330K rwdata, 1236K rodata, 1328K init, 16731K bss, 1162)
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 127
[   13.844962] clocksource: OCTEON_CVMCOUNT: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
[   13.855830] Calibrating delay loop (skipped) preset value.. 1000.00 BogoMIPS (lpj=2000000)
[   13.864040] pid_max: default: 32768 minimum: 301
[   13.868767] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[   13.875252] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[   13.882962] Checking for the daddi bug... no.
[   13.888198] Hierarchical SRCU implementation.
[   13.893207] smp: Bringing up secondary CPUs ...
[   13.898265] SMP: Booting CPU01 (CoreId  1)...
[   13.902655] CPU1 revision is: 000d0601 (Cavium Octeon+)
[   13.902885] smp: Brought up 1 node, 2 CPUs
[   13.916204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[   13.925852] futex hash table entries: 512 (order: 4, 65536 bytes)
[   13.932600] NET: Registered protocol family 16
[   13.947309] Not in host mode, PCI Controller not initialized
[   13.968490] SCSI subsystem initialized
[   13.972686] usbcore: registered new interface driver usbfs
[   13.978233] usbcore: registered new interface driver hub
[   13.983653] usbcore: registered new device driver usb
[   13.990959] clocksource: Switched to clocksource OCTEON_CVMCOUNT
[   13.998255] NET: Registered protocol family 2
[   14.003415] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[   14.010447] TCP bind hash table entries: 4096 (order: 5, 131072 bytes)
[   14.016998] TCP: Hash tables configured (established 4096 bind 4096)
[   14.023382] UDP hash table entries: 256 (order: 2, 24576 bytes)
[   14.029247] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[   14.035842] NET: Registered protocol family 1
[   14.041861] Crashlog allocated RAM at address 0x3f00000
[   14.047176] workingset: timestamp_bits=62 max_order=17 bucket_order=0
[   14.065676] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   14.071763] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[   14.086436] io scheduler noop registered
[   14.090468] io scheduler deadline registered (default)
[   14.096184] octeon_gpio 1070000000800.gpio-controller: OCTEON GPIO driver probed.
[   14.103985] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   14.111417] console [ttyS0] disabled
[   14.114893] 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 41, base_baud = 31250000) is a OCTEON
[   14.124683] console [ttyS0] enabled
[   14.124683] console [ttyS0] enabled
[   14.131607] bootconsole [early0] disabled
[   14.131607] bootconsole [early0] disabled
[   14.140285] 1180000000c00.serial: ttyS1 at MMIO 0x1180000000c00 (irq = 42, base_baud = 31250000) is a OCTEON
[   14.150793] octeon_rng octeon_rng: Octeon Random Number Generator
[   14.157467] cacheinfo: Failed to find cpu0 device node
[   14.162685] cacheinfo: Unable to detect cache hierarchy for CPU 0
[   14.175673] loop: module loaded
[   14.179780] of-flash 1f400000.nor: Can't get bank width from device tree
[   14.187061] libphy: mdio_octeon: probed
[   14.191005] [Firmware Warn]: /soc@0/mdio@1180000001800/ethernet-phy@7: Whitelisted compatible string. Please remove
[   14.202182] [Firmware Warn]: /soc@0/mdio@1180000001800/ethernet-phy@6: Whitelisted compatible string. Please remove
[   14.213362] [Firmware Warn]: /soc@0/mdio@1180000001800/ethernet-phy@5: Whitelisted compatible string. Please remove
[   14.224507] mdio_octeon 1180000001800.mdio: Probed
[   14.229932] libphy: Fixed MDIO Bus: probed
[   14.234303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   14.240892] ehci-platform: EHCI generic platform driver
[   14.246401] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   14.252671] ohci-platform: OHCI generic platform driver
[   14.258302] usbcore: registered new interface driver usb-storage
[   14.264425] octeon_wdt: Initial granularity 5 Sec
[   14.273052] Interface 0 has 3 ports (RGMII)
[   14.281525] octeon-hcd 16f0010000000.usbc: Octeon Host Controller
[   14.287752] octeon-hcd 16f0010000000.usbc: new USB bus registered, assigned bus number 1
[   14.295976] octeon-hcd 16f0010000000.usbc: irq 56, io mem 0x00000000
[   14.303455] hub 1-0:1.0: USB hub found
[   14.307394] hub 1-0:1.0: 1 port detected
[   14.311991] octeon-hcd 16f0010000000.usbc: Registered HCD for port 0 on irq 56
[   14.320877] NET: Registered protocol family 10
[   14.327445] Segment Routing with IPv6
[   14.331299] NET: Registered protocol family 17
[   14.335870] 8021q: 802.1Q VLAN Support v1.8
[   14.340407] Bootbus flash: Setting flash for 4MB flash at 0x1f800000
[   14.346967] phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000a7
[   14.357360] Amd/Fujitsu Extended Query Table at 0x0040
[   14.362566]   Amd/Fujitsu Extended Query version 1.1.
[   14.367649] phys_mapped_flash: Swapping erase regions for top-boot CFI table.
[   14.374815] number of CFI chips: 1
[   14.378278] 3 cmdlinepart partitions found on MTD device phys_mapped_flash
[   14.385191] Creating 3 MTD partitions on "phys_mapped_flash":
[   14.390979] 0x000000000000-0x000000080000 : "boot0"
[   14.397066] 0x000000080000-0x000000100000 : "boot1"
[   14.403212] 0x000000100000-0x000000110000 : "eeprom"
[   14.411056] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
[   14.418316] Waiting for root device /dev/sda2...
[   14.694990] usb 1-1: new high-speed USB device number 2 using octeon-hcd
[   15.157589] usb-storage 1-1:1.0: USB Mass Storage device detected
[   15.164285] scsi host0: usb-storage 1-1:1.0
[   16.377528] scsi 0:0:0:0: Direct-Access     SRT      USB              1100 PQ: 0 ANSI: 4
[   16.387726] sd 0:0:0:0: [sda] 15765504 512-byte logical blocks: (8.07 GB/7.52 GiB)
[   16.396124] sd 0:0:0:0: [sda] Write Protect is off
[   16.401790] sd 0:0:0:0: [sda] No Caching mode page found
[   16.407211] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   16.417477]  sda: sda1 sda2
[   16.423799] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   16.435439] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[   16.443711] Freeing unused kernel memory: 1328K
[   16.448300] This architecture does not have kernel memory protection.
[   16.979499] init: Console is alive
[   16.983324] init: - watchdog -
[   17.607797] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[   17.722469] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[   17.740277] init: - preinit -
[   18.930430] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   20.963071] eth0: 1000 Mbps Full duplex, port 0, queue 0
[   20.968484] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.208639] mount_root: rootdisk overlay filesystem has not been formatted yet
sh: mkfs.f2fs: not found
[   22.221786] mount_root: no usable overlay filesystem found, using tmpfs overlay
[   23.377720] random: crng init done
[   23.407105] urandom-seed: Seed file not found (/etc/urandom.seed)
[   23.538293] eth0: Link down
[   23.551669] procd: - early -
[   23.554692] procd: - watchdog -
[   24.221523] procd: - watchdog -
[   24.225235] procd: - ubus -
[   24.364194] procd: - init -
Please press Enter to activate this console.
[   24.943579] kmodloader: loading kernel modules from /etc/modules.d/*
[   24.964605] l2tp_core: L2TP core driver, V2.0
[   24.970234] l2tp_netlink: L2TP netlink interface
[   24.980069] gre: GRE over IPv4 demultiplexor driver
[   24.987409] ip_gre: GRE over IPv4 tunneling driver
[   25.001262] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   25.289771] Netfilter messages via NETLINK v0.30.
[   25.297611] ip_set: protocol 6
[   25.337788] cryptodev: driver 1.9 loaded.
[   25.358006] u32 classifier
[   25.360794]     input device check on
[   25.364596]     Actions configured
[   25.371338] Mirror/redirect action on
[   25.386211] nf_conntrack version 0.5.0 (3584 buckets, 14336 max)
[   25.405328] ip_tables: (C) 2000-2006 Netfilter Core Team
[   25.553490] ctnetlink v0.93: registering with nfnetlink.
[   25.698364] wireguard: WireGuard 0.0.20180304 loaded. See www.wireguard.com for information.
[   25.706931] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   25.765405] xt_time: kernel timezone is -0000
[   25.858495] PPP generic driver version 2.4.2
[   25.865711] PPP MPPE Compression module registered
[   25.872986] NET: Registered protocol family 24
[   25.879616] PPTP driver version 0.8.5
[   25.888062] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   25.896812] kmodloader: done loading kernel modules from /etc/modules.d/*
[   32.622166] br-lan: port 1(eth0) entered blocking state
[   32.627510] br-lan: port 1(eth0) entered disabled state
[   32.633218] device eth0 entered promiscuous mode
[   32.648210] br-lan: port 1(eth0) entered blocking state
[   32.653545] br-lan: port 1(eth0) entered forwarding state
[   32.659197] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   32.700308] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   33.645742] br-lan: port 1(eth0) entered disabled state
[   34.746429] eth0: 1000 Mbps Full duplex, port 0, queue 0
[   34.763064] br-lan: port 1(eth0) entered blocking state
[   34.768376] br-lan: port 1(eth0) entered forwarding state
[   34.807116] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   35.811122] eth1: 1000 Mbps Full duplex, port 1, queue 1
[   35.816578] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   39.261056] MTD: Attempt to mount non-MTD device "/dev/loop0"
27.04.20181520Base systemFeature RequestVery LowHighCOMFAST CF-E380AC Switch 'VLAN' FeaturesTrunkUnconfirmed Task Description

Currently on LEDE version: LEDE Reboot 17.01.4 r3560-79f57e422d / LuCI lede-17.01 branch (git-17.290.79498-d3f0685)

There is no Switch feature under LUCI menu Network. In other words, I’d like to create a VLAN tagging from the main router(which already has VLAN Switch capabilities) to be able to have VLAN capabilities for multiple WLAN Virtual Interfaces.

Is it possible to do this for this AP?
thanks

23.05.20181559Base systemBug ReportVery LowHighSystem fails to start up correctly, with 2 dnsmasq/ujai...TrunkUnconfirmed Task Description

I have noticed frequent problems with OpenWrt trunk: about 30% of the time it doesn’t start up correctly (but it seems to boot OK and dmesg messages seem fine), ps shows two dnsmasq/ujail processes (note: I’ve been using ujail for the past 2+ years, without serious problems other than  FS#878 ).

When OpenWrt gets stuck with 2 dnsmasq/ujail processes, invoking logread produces the error: “Failed to find log object: Not found” multiple times. If I kill the ujail/dnsmasq processes OpenWrt will just reboot (!)

I’ve tested this on two different OpenWrt VMs and on two different systems running VBox 5.1 and 5.2 under Ubuntu.

Here is what a ps looks like when the LEDE VM has booted normally:

root@10.0.3.141's password: 


BusyBox v1.28.3 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r6965-9c0ddafd46
 -----------------------------------------------------
root@OpenWrt:~# ps
  PID USER       VSZ STAT COMMAND
    1 root     13384 S    /sbin/procd
    2 root         0 SW   [kthreadd]
    3 root         0 IW   [kworker/0:0]
    4 root         0 IW<  [kworker/0:0H]
    5 root         0 IW   [kworker/u2:0]
    6 root         0 IW<  [mm_percpu_wq]
    7 root         0 SW   [ksoftirqd/0]
    8 root         0 IW   [rcu_sched]
    9 root         0 IW   [rcu_bh]
   10 root         0 SW   [migration/0]
   11 root         0 SW   [cpuhp/0]
   12 root         0 IW<  [netns]
   13 root         0 IW   [kworker/u2:1]
   17 root         0 IW   [kworker/0:1]
   95 root         0 SW   [oom_reaper]
   96 root         0 IW   [kworker/u2:2]
  232 root         0 IW<  [writeback]
  234 root         0 IW<  [crypto]
  235 root         0 IW<  [kintegrityd]
  237 root         0 IW<  [kblockd]
  304 root         0 IW<  [ata_sff]
  325 root         0 IW<  [watchdogd]
  379 root         0 IW   [kworker/u2:3]
  439 root         0 SW   [kswapd0]
  525 root         0 IW<  [pencrypt]
  527 root         0 IW<  [pdecrypt]
  554 root         0 IW<  [acpi_thermal_pm]
  623 root         0 SW   [scsi_eh_0]
  624 root         0 IW<  [scsi_tmf_0]
  627 root         0 SW   [scsi_eh_1]
  638 root         0 IW<  [scsi_tmf_1]
  641 root         0 SW   [scsi_eh_2]
  642 root         0 IW<  [scsi_tmf_2]
  645 root         0 IW<  [ipv6_addrconf]
  646 root         0 IW   [kworker/u2:4]
  724 root         0 IW<  [kworker/0:1H]
  732 root         0 IW<  [ext4-rsv-conver]
  818 root         0 IW<  [ext4-rsv-conver]
  973 root      9012 S    /sbin/ubusd
  978 root      2744 S    /sbin/askfirst /usr/libexec/login.sh
  979 root      3112 S    /bin/ash --login
 1273 root         0 IW<  [cfg80211]
 1512 root      7064 S    /sbin/logd -S 64
 1743 root     15564 S    /sbin/netifd
 1800 root     11260 S    /usr/sbin/odhcpd
 1860 root      2944 S    /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300 -T 3
 2149 root      3108 S    udhcpc -p /var/run/udhcpc-eth1.pid -s /lib/netifd/dhcp.script -f -t 0 -i eth1 -x hostname:OpenWrt -C -O 121
 2162 root      3108 S    udhcpc -p /var/run/udhcpc-eth2.pid -s /lib/netifd/dhcp.script -f -t 0 -i eth2 -x hostname:OpenWrt -C -O 121
 2169 root      3108 S    udhcpc -p /var/run/udhcpc-vlan40.pid -s /lib/netifd/dhcp.script -f -t 0 -i vlan40 -x hostname:OpenWrt -C -O 121
 2172 root      3108 S    udhcpc -p /var/run/udhcpc-vlan50.pid -s /lib/netifd/dhcp.script -f -t 0 -i vlan50 -x hostname:OpenWrt -C -O 121
 2687 root     10032 S    {dnsmasq} /sbin/ujail -n dnsmasq -u -l -r /dev/null -r /dev/urandom -r /etc/TZ -r /etc/dnsmasq.conf -r /etc/ethers -r /etc/group -r /etc/hosts -r /etc/passwd -r /sbin/hotplug-call 
 2700 dnsmasq  13612 S    /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c -k -x /var/run/dnsmasq/dnsmasq.cfg01411c.pid
 2705 root         0 IW   [kworker/0:2]
 2947 root      7092 S    /usr/sbin/softflowd -d -i eth0 -m 8192 -n 10.0.3.100:2055 -p /var/run/softflowd.pid -c /var/run/softflowd.ctl -v 5 -T full -s 100 -p /var/run/softflowd.pid
 2990 root      7908 S    /usr/lib/ipsec/starter --daemon charon --nofork
 3067 root     78176 S    /usr/lib/ipsec/charon
 3121 root      3112 S<   /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 1.gr.pool.ntp.org -p 0.europe.pool.ntp.org -p 2.europe.pool.ntp.org
 3921 root      3256 S    /bin/sh /usr/sbin/mwan3track wan eth1 online 10.0.3.141 8.8.4.4 208.67.222.222
 4500 root      3256 S    /bin/sh /usr/sbin/mwan3track wan2 eth2 online 10.0.3.70 8.8.8.8 208.67.220.220
 4912 root      3060 S    /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300 -T 3
 4917 root      3112 S    sleep 5
 4922 root      3112 S    sleep 5
 4923 root      3112 S    -ash
 4931 root      3108 R    ps
root@OpenWrt:~# uname -a
Linux OpenWrt 4.14.41 #0 SMP Mon May 21 16:07:48 2018 x86_64 GNU/Linux
root@OpenWrt:~# cat /etc/openwrt_*
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='SNAPSHOT'
DISTRIB_REVISION='r6965-9c0ddafd46'
DISTRIB_TARGET='x86/64'
DISTRIB_ARCH='x86_64'
DISTRIB_DESCRIPTION='OpenWrt SNAPSHOT r6965-9c0ddafd46'
DISTRIB_TAINTS=''
r6965-9c0ddafd46
root@OpenWrt:~#

And here is what ps on the same system (same VM, same /etc/config etc) looks like when it fails to work correctly:

  PID USER       VSZ STAT COMMAND
    1 root     13384 S    /sbin/procd
    2 root         0 SW   [kthreadd]
    3 root         0 IW   [kworker/0:0]
    4 root         0 IW<  [kworker/0:0H]
    5 root         0 IW   [kworker/u2:0]
    6 root         0 IW<  [mm_percpu_wq]
    7 root         0 SW   [ksoftirqd/0]
    8 root         0 IW   [rcu_sched]
    9 root         0 IW   [rcu_bh]
   10 root         0 SW   [migration/0]
   11 root         0 SW   [cpuhp/0]
   12 root         0 IW<  [netns]
   13 root         0 IW   [kworker/u2:1]
   29 root         0 IW   [kworker/0:1]
   75 root         0 SW   [oom_reaper]
   76 root         0 IW   [kworker/u2:2]
  232 root         0 IW<  [writeback]
  233 root         0 IW<  [crypto]
  235 root         0 IW<  [kintegrityd]
  236 root         0 IW<  [kblockd]
  238 root         0 IW<  [ata_sff]
  325 root         0 IW<  [watchdogd]
  438 root         0 SW   [kswapd0]
  524 root         0 IW<  [pencrypt]
  526 root         0 IW<  [pdecrypt]
  545 root         0 IW<  [acpi_thermal_pm]
  622 root         0 SW   [scsi_eh_0]
  623 root         0 IW<  [scsi_tmf_0]
  626 root         0 SW   [scsi_eh_1]
  637 root         0 IW<  [scsi_tmf_1]
  640 root         0 SW   [scsi_eh_2]
  641 root         0 IW<  [scsi_tmf_2]
  644 root         0 IW<  [ipv6_addrconf]
  645 root         0 IW   [kworker/u2:3]
  646 root         0 IW   [kworker/u2:4]
  728 root         0 IW<  [kworker/0:1H]
  732 root         0 IW<  [ext4-rsv-conver]
  818 root         0 IW<  [ext4-rsv-conver]
  973 root      9016 S    /sbin/ubusd
  978 root      2744 S    /sbin/askfirst /usr/libexec/login.sh
  979 root      3112 S    /bin/ash --login
 1269 root         0 IW<  [cfg80211]
 1801 root     11328 S    /usr/sbin/odhcpd
 2697 root     10032 S    {dnsmasq} /sbin/ujail -n dnsmasq -u -l -r /dev/null 
 2705 root     10032 R    {dnsmasq} /sbin/ujail -n dnsmasq -u -l -r /dev/null 
 2759 root      3108 R    ps
08.06.20181581OtherBug ReportVery LowHighnetifd:Failed to bring up static 6rd tunnel after we mo...AllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.

netifd-0f96606b7040b8e14190ff055d5761744bc15f6d

- Steps to reproduce

Step 1: Create a DHCPv4 + dynamic 6rd wan connection. Below is the /etc/config/network. wan and wan6 go up after “/etc/init.d/network reload”

[CXNK00123457] /lib/netifd/proto # cat /etc/config/network 

config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'auto'

config interface 'lan'
	option ifname 'eth0'
	option type 'bridge'
	option proto 'static'
	option ipaddr '192.168.1.1'
	option netmask '255.255.255.0'
	option ip6assign '64'

config interface 'pvtlan'
	option proto 'static'
	option ipaddr '169.254.1.1'
	option netmask '255.255.255.0'

config interface 'wan'
	option ifname 'eth1'
	option proto 'dhcp'
	option peerdns '1'
	option defaultroute '1'
	option vendorid '844Ei.ONT.dslforum.org'
	option reqopts '43 120 121'
	option iface6rd 'wan6'

Step 2: Edit /etc/config/network file, disable dynamic 6rd and provision a static one

[CXNK00123457] /etc/config # cat network.static6rd 

config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'auto'

config interface 'lan'
	option ifname 'eth0'
	option type 'bridge'
	option proto 'static'
	option ipaddr '192.168.1.1'
	option netmask '255.255.255.0'
	option ip6assign '64'

config interface 'pvtlan'
	option proto 'static'
	option ipaddr '169.254.1.1'
	option netmask '255.255.255.0'

config interface 'wan'
	option ifname 'eth1'
	option proto 'dhcp'
	option peerdns '1'
	option defaultroute '1'
	option vendorid '844Ei.ONT.dslforum.org'
	option reqopts '43 120 121'

config interface 'wan6'
	option ifname 'eth1'
	option proto '6rd'
	option peerdns '0'
	option defaultroute '1'
	list dns '2001:db8:1::a'
	list dns '2001:db8:1::b'
	option tunlink 'wan'
	option peeraddr '10.101.1.1'
	option ip6prefix '2602::'
	option ip6prefixlen '32'
	option ip4prefixlen '24'

Step 3: Run “/etc/init.d/network reload”. However, netifd failed to bring up the static 6rd tunnel wan6.

Here is the log of netifd from /var/log/messages. From the log, it seems that netifd was trying to bring up wan6 before wan (DHCPv4) went up. See “netifd: Interface ‘wan6’ is setting up now”. Does this matter?

[CXNK00123457] /etc/config # /etc/init.d/network reload 
Wed Jun  6 06:26:25 2018 daemon.notice netifd: Interface 'wan6' has lost the connection
Wed Jun  6 06:26:25 2018 daemon.warn dnsmasq[19262]: no servers found in /tmp/resolv.conf.auto, will retry
Wed Jun  6 06:26:25 2018 daemon.notice netifd: tunnel '6rd-wan6' link is down
Wed Jun  6 06:26:26 2018 daemon.notice netifd: Interface 'wan6' is now down
Wed Jun  6 06:26:26 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Wed Jun  6 06:26:26 2018 daemon.notice netifd: wan (2641): Received SIGTERM
Wed Jun  6 06:26:26 2018 daemon.notice netifd: Interface 'wan' is now down
Wed Jun  6 06:26:26 2018 daemon.notice netifd: Interface 'wan' is disabled
Wed Jun  6 06:26:26 2018 daemon.notice netifd: Interface 'wan' has link connectivity loss
Wed Jun  6 06:26:26 2018 kern.info kernel: [119305.628866] 8021q: adding VLAN 0 to HW filter on device eth1
Wed Jun  6 06:26:26 2018 kern.info kernel: [119305.630319] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Wed Jun  6 06:26:26 2018 daemon.notice netifd: Interface 'wan' is enabled
Wed Jun  6 06:26:27 2018 daemon.notice netifd: Interface 'wan6' is now down
Wed Jun  6 06:26:28 2018 daemon.notice netifd: Network device 'eth1' link is up
Wed Jun  6 06:26:28 2018 daemon.notice netifd: Interface 'wan' has link connectivity 
Wed Jun  6 06:26:28 2018 daemon.notice netifd: Interface 'wan' is setting up now
Wed Jun  6 06:26:28 2018 kern.info kernel: [119307.631409] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
Wed Jun  6 06:26:28 2018 kern.info kernel: [119307.632184] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Wed Jun  6 06:26:29 2018 daemon.notice netifd: wan (3351): udhcpc (v1.23.2) started
=========== interface wan disconnected ===========
Wed Jun  6 06:26:30 2018 daemon.notice netifd: wan (3351): Sending discover...
Wed Jun  6 06:26:31 2018 daemon.notice netifd: wan (3351): Sending select for 10.101.1.100...
Wed Jun  6 06:26:31 2018 daemon.notice netifd: wan (3351): Lease of 10.101.1.100 obtained, lease time 503
Wed Jun  6 06:26:31 2018 daemon.notice netifd: Interface 'wan' is now up
Wed Jun  6 06:26:31 2018 daemon.info dnsmasq[19262]: reading /tmp/resolv.conf.auto
Wed Jun  6 06:26:31 2018 daemon.info dnsmasq[19262]: using local addresses only for domain lan
Wed Jun  6 06:26:31 2018 daemon.info dnsmasq[19262]: using nameserver 10.101.0.1#53
=========== interface wan connected ===========
Wed Jun  6 06:26:31 2018 daemon.notice netifd: wan (3351): rgcommon>sys update-interface-status wan
Wed Jun  6 06:26:32 2018 user.notice firewall: Reloading firewall due to ifup of wan (eth1)

17.07.20181664Base systemBug ReportVery LowHighUnable to use wan port (dhcp or static ip is not workin...AllNew Task Description

Device: Belkin F9K1115 v2
Software version: OpenWrt 18.06.0-rc1, LEDE after r3466-f6907dc

Unable to use wan port on any new software version (last known working LEDE version is r3466-f6907dc).
DHCP is not getting ip address. After setting up static ip address there is no network communication.

22.07.20181686Base systemBug ReportVery LowHighMir3g random reboot/freezeTrunkUnconfirmed Task Description

Xiaomi Mi Router 3G r7519-1e83f775a3 / LuCI Master (git-18.199.46142-369553c)

i’m using a mir3g and weekly updating to the latest snapshot but from months i still having the same issue random reboots or in some cases, an amber led and what looks a freeze.

here the interesting parts i’ve found using /etc/syslog for logging (to avoid losing the log each reboot) when the reboots come up:

Fri Jul 20 05:36:04 2018 kern.alert kernel: [42728.145661] CPU 3 Unable to handle kernel paging request at virtual address 0000802f, epc == 8e9b1ae0, ra == 8e9b1994
Fri Jul 20 05:36:04 2018 kern.warn kernel: [42728.156261] Oops[#1]:
                                                                                                                  Fri Jul 20 05:36:07 2018 user.notice dnsmasq: DNS rebinding

...

Sat Jul 21 01:37:35 2018 kern.alert kernel: [72076.004853] CPU 1 Unable to handle kernel paging request at virtual address 07402008, epc == 80118aa0, ra == 8011a1f4
Sat Jul 21 01:37:35 2018 kern.warn kernel: [72076.015740] Oops[#1]:
Sat Jul 21 01:37:35 2018 kern.warn kernel: [72076.018010] CPU: 1 PID: 18600 Comm: nslookup Not tainted 4.14.54 #0
Sat Jul 21 01:37:38 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!

...

Sun Jul 22 04:30:12 2018 kern.alert kernel: [96742.276696] CPU 0 Unable to handle kernel paging request at virtual address 0000802f, epc == 8e991ae0, ra == 8e991994
Sun Jul 22 04:30:12 2018 kern.warn kernel: [96742.287301] Oops[#1]:
Sun Jul 22 04:30:15 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!

any guess to whats happening? i just have a faulty unit?

04.08.20181728KernelBug ReportVery LowHighNewifi D1- Unable to rebootAllUnconfirmed Task Description

Newifi D1, openwrt trunk, 18.06, etc.

This device can not reboot and there is a patch that can fix this problem.
The official builds don’t include it, so the only way to solve it is to build the firmware by ourselves, which is very inconvenient.

I hope there is someone who can solve this problem.

Thank you!

The patch is from https://forum.openwrt.org/t/newifi-d1-unable-to-reboot/7910/8

--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1075,7 +1075,7 @@ static const struct flash_info spi_nor_i
 	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_READ_OP) },
 	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
16.08.20181787Base systemBug ReportVery LowHighiw doesn't support wep with ibss adhocTrunkUnconfirmed Task Description

VoCore2 / OpenWrt SNAPSHOT, r7866-8c91807

Works:

# iw phy phy0 interface add f00 type ibss
# ip link set up f00
# iw dev f00 ibss join foobar 2412
root@tolppaB8D812x67_27402:~# iwinfo f00 info
f00 ESSID: “foobar”

        Access Point: B8:D8:12:67:6B:0A
        Mode: Ad-Hoc  Channel: 1 (2.412 GHz)
        Tx-Power: 0 dBm  Link Quality: unknown/70
        Signal: unknown  Noise: unknown
        Bit Rate: unknown
        Encryption: unknown
        Type: nl80211  HW Mode(s): 802.11bgn
        Hardware: unknown [Generic MAC80211]
        TX power offset: unknown
        Frequency offset: unknown
        Supports VAPs: yes  PHY name: phy0

Does NOT work:

# iw dev f00 ibss join foobar 2412 key d:0:42325d294a
Usage: iw [options] dev <devname> ibss join <SSID> <freq in MHz> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>] [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]

Join the IBSS cell with the given SSID, if it doesn’t exist create
it on the given frequency. When fixed frequency is requested, don’t
join/create a cell on a different frequency. When a fixed BSSID is
requested use that BSSID and do not adopt another cell’s BSSID even
if it has higher TSF and the same SSID. If an IBSS is created, create
it with the specified basic-rates, multicast-rate and beacon-interval.

Options:

  1. -debug enable netlink debugging
23.08.20181806Base systemBug ReportVery LowHighafter rebooting with a device connect, that port doesn'...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Device: Linksys E1700
Running: Trunk, but also tested positive with 17.01

After rebooting the E1700 router, that has a device connected, whos network card has enery saving activated, the link of the port, that the device is connected to, does not come up.

Tested with a Dell laptop with a Realtek PCIe GBE Familiy Controller, the driver options that needed to be deactivated were “Energy Efficient Ethernet” and “Green Ethernet”.
But the problem also happened with various thin clients and printers.

The log or dmesg does not show anything regarding this.


30.08.20181826KernelBug ReportVery LowHighFQ_codel is the wrong qdisc for the CAN busTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
CAN bus
- Software versions of OpenWrt/LEDE release, packages, etc.
all
- Steps to reproduce

 bring up a can device that expects pfifo-fast, rather than noqueue

We finally had an edge case where fq_codel is totally the wrong thing.

https://marc.info/?l=linux-can&m=152785826628439&w=2

https://github.com/systemd/systemd/issues/9194

I don’t know how many can bus devices expect pfifo_fast, rather than noqueue. So far as I can tell the flow dissector doesn’t engage, so no FQ, but can is oft blocking bus so codel can drop more often than pfifo_fast does.

31.08.20181827Base systemBug ReportVery LowHighwhy has uci no package which depends on?AllUnconfirmed Task Description

Hi,
today I did a bad thing, which only could happen, because uci have no package which depends on: I uninstalled which my currently developed clean script uci package and after reboot the router doesnt came up again :D

But why is this main package no refereed anywhere?

Regards,
Thomas

02.09.20181829Base systemBug ReportVery LowHighERROR 'eth0: tx ring full' on BT Home Hub 2BAllUnconfirmed Task Description

Device: BT Home Hub 2B
Software: OpenWrt 18.06.X / LEDE 17.01.X

Never had error ‘eth0: tx ring full’ in Chaos Calmer and Barrier Breaker but now after fresh update my logs are full with error ‘eth0: tx ring full’

AFAIK Looks like driver issue:
Tx ring full errors with HH5a and it was an ethernet driver issue or something at the time when LEDE on HH5a wasn’t fully compatible with SMP.
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=2270fc5947a3cc3b7595ed22468425a4b10ebc30

Kernel Log:

[    0.000000] Linux version 4.4.92 (buildbot@debian8) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3556-46e29bd) ) #0 Mon Oct 16 15:21:43 2017
[    0.000000] SoC: Danube rev 1.5
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019641 (MIPS 24KEc)
[    0.000000] MIPS: machine is BTHOMEHUBV2B - BT Home Hub 2B
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 804704b0, node_mem_map 81007da0
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyLTQ0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00072538
[    0.000000] Readback ErrCtl register=00072538
[    0.000000] Memory: 58788K/65536K available (3884K kernel code, 156K rwdata, 620K rodata, 1212K init, 200K bss, 6748K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 333MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
[    0.000017] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
[    0.007955] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
[    0.050591] pid_max: default: 32768 minimum: 301
[    0.055565] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.062117] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.078972] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.088665] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.094920] pinctrl core: initialized pinctrl subsystem
[    0.102308] NET: Registered protocol family 16
[    0.115040] pinctrl-xway 1e100b10.pinmux: Init done
[    0.121547] dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels: 20
[    0.182342] Can't analyze schedule() prologue at 80009078
[    0.204445] PCI host bridge /fpi@10000000/pci@E105400 ranges:
[    0.210131]  MEM 0x0000000018000000..0x0000000019ffffff
[    0.215421]   IO 0x000000001ae00000..0x000000001affffff
[    0.247772] gpio-stp-xway 1e100bb0.stp: Init done
[    0.253699] usbcore: registered new interface driver usbfs
[    0.259334] usbcore: registered new interface driver hub
[    0.264760] usbcore: registered new device driver usb
[    0.270367] PCI host bridge to bus 0000:00
[    0.274424] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
[    0.281356] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
[    0.288293] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.295145] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.303231] pci 0000:00:0e.0: [168c:ff1d] type 00 class 0x020000
[    0.303324] pci 0000:00:0e.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[    0.303913] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.303989] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[    0.312148] clocksource: Switched to clocksource MIPS
[    0.319606] NET: Registered protocol family 2
[    0.325739] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.332707] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.339089] TCP: Hash tables configured (established 1024 bind 1024)
[    0.345673] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.351495] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.358186] NET: Registered protocol family 1
[    0.362627] PCI: CLS 0 bytes, default 32
[    0.376005] gptu: totally 6 16-bit timers/counters
[    0.380968] gptu: misc_register on minor 63
[    0.385105] gptu: succeeded to request irq 126
[    0.389607] gptu: succeeded to request irq 127
[    0.394120] gptu: succeeded to request irq 128
[    0.398634] gptu: succeeded to request irq 129
[    0.403148] gptu: succeeded to request irq 130
[    0.407662] gptu: succeeded to request irq 131
[    0.418932] lantiq,vmmc 1f103000.vmmc: requested GPIO 511
[    0.424282] lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x03a00000
[    0.432018] Crashlog allocated RAM at address 0x3f00000
[    0.476416] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.482185] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.499017] io scheduler noop registered
[    0.502883] io scheduler deadline registered (default)
[    0.509281] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[    0.518249] console [ttyLTQ0] enabled
[    0.525357] bootconsole [early0] disabled
[    0.534622] lantiq nor flash device: 00080000 at 10000000
[    0.538954] Found: AMD AM29LV400BB
[    0.541851] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank
[    0.547510] number of JEDEC chips: 1
[    0.551021] 5 ofpart partitions found on MTD device ltq_nor
[    0.556369] Creating 5 MTD partitions on "ltq_nor":
[    0.561103] 0x000000000000-0x000000040000 : "uboot"
[    0.572457] 0x000000040000-0x000000050000 : "uboot_env"
[    0.579853] 0x000000050000-0x000000060000 : "rg_conf_1"
[    0.587361] 0x000000060000-0x000000070000 : "rg_conf_2"
[    0.594878] 0x000000070000-0x000000080000 : "rg_conf_factory"
[    0.604299] nand: device found, Manufacturer ID: 0xec, Chip ID: 0x75
[    0.609065] nand: Samsung NAND 32MiB 3,3V 8-bit
[    0.613461] nand: 32 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[    0.620663] Scanning device for bad blocks
[    0.720375] 3 ofpart partitions found on MTD device 14000000.nand-parts
[    0.725486] Creating 3 MTD partitions on "14000000.nand-parts":
[    0.731235] 0x000000000000-0x000000004000 : "art"
[    0.739803] 0x000000004000-0x000000204000 : "kernel"
[    0.747145] 0x000000204000-0x000002000000 : "ubi"
[    0.812043] libphy: ltq_mii: probed
[    0.814549] adm6996: eth0: ADM6996M model PHY found.
[    0.822800] eth0: attached PHY [Infineon ADM6996] (phy_addr=1e180000.etop-ff:00, irq=-1)
[    0.831375] wdt 1f8803f0.watchdog: Init done
[    0.840503] NET: Registered protocol family 10
[    0.856664] NET: Registered protocol family 17
[    0.859717] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.871917] 8021q: 802.1Q VLAN Support v1.8
[    0.883843] UBI: auto-attach mtd7
[    0.885598] ubi0: attaching mtd7
[    1.336604] ubi0: scanning is finished
[    1.361954] ubi0: attached mtd7 (name "ubi", size 29 MiB)
[    1.365889] ubi0: PEB size: 16384 bytes (16 KiB), LEB size: 15872 bytes
[    1.372293] ubi0: min./max. I/O unit sizes: 512/512, sub-page size 256
[    1.378627] ubi0: VID header offset: 256 (aligned 256), data offset: 512
[    1.385133] ubi0: good PEBs: 1919, bad PEBs: 0, corrupted PEBs: 0
[    1.391045] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 92
[    1.397979] ubi0: max/mean erase counter: 51/38, WL threshold: 4096, image sequence number: 568085886
[    1.406930] ubi0: available PEBs: 0, total reserved PEBs: 1919, PEBs reserved for bad PEB handling: 40
[    1.416993] ubi0: background thread "ubi_bgt0d" started, PID 370
[    1.432449] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 372
[    1.446277] UBIFS (ubi0:0): recovery needed
[    1.503907] UBIFS (ubi0:0): recovery completed
[    1.507083] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.514096] UBIFS (ubi0:0): LEB size: 15872 bytes (15 KiB), min./max. I/O unit sizes: 512 bytes/512 bytes
[    1.523377] UBIFS (ubi0:0): FS size: 29474304 bytes (28 MiB, 1857 LEBs), journal size 4031488 bytes (3 MiB, 254 LEBs)
[    1.533674] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[    1.539350] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 826B888B-9DA3-431E-9A6B-20C249A26A8E, small LPT model
[    1.551985] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    1.564257] Freeing unused kernel memory: 1212K
[    1.867673] init: Console is alive
[    1.870177] init: - watchdog -
[    2.421913] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.819449] SCSI subsystem initialized
[    3.732545] dwc2 1e101000.ifxhcd: DWC OTG Controller
[    3.736063] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
[    3.743224] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[    3.750773] hub 1-0:1.0: USB hub found
[    3.753929] hub 1-0:1.0: 1 port detected
[    3.780073] usbcore: registered new interface driver usb-storage
[    3.785942] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.799938] init: - preinit -
[    3.956660] dwc2 1e101000.ifxhcd: Mode Mismatch Interrupt: currently in Host mode
[    3.962665] dwc2 1e101000.ifxhcd: Mode Mismatch Interrupt: currently in Host mode
[    4.152328] usb 1-1: new high-speed USB device number 2 using dwc2
[    4.157465] dwc2 1e101000.ifxhcd: Mode Mismatch Interrupt: currently in Host mode
[    4.164318] dwc2 1e101000.ifxhcd: Mode Mismatch Interrupt: currently in Host mode
[    4.284665] random: procd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[    4.374437] usb-storage 1-1:1.0: USB Mass Storage device detected
[    4.393897] scsi host0: usb-storage 1-1:1.0
[    5.581867] scsi 0:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
[    5.593162] sd 0:0:0:0: [sda] 7907328 512-byte logical blocks: (4.05 GB/3.77 GiB)
[    5.601593] sd 0:0:0:0: [sda] Write Protect is off
[    5.604986] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    5.605816] sd 0:0:0:0: [sda] No Caching mode page found
[    5.610108] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    5.622842]  sda: sda1 sda2
[    5.630553] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    7.527028] mount_root: mounting /dev/root
[    7.539146] mount_root: loading kmods from internal overlay
[    7.617329] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    7.631272] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    7.949318] block: attempting to load /etc/config/fstab
[    7.963471] block: extroot: not configured
[    7.974180] urandom-seed: Seeding with /etc/urandom.seed
[    8.048661] procd: - early -
[    8.052712] procd: - watchdog -
[    8.722006] procd: - watchdog -
[    8.724598] procd: - ubus -
[    8.823854] random: ubusd: uninitialized urandom read (4 bytes read, 99 bits of entropy available)
[    8.915088] random: ubusd: uninitialized urandom read (4 bytes read, 104 bits of entropy available)
[    8.924917] random: ubusd: uninitialized urandom read (4 bytes read, 104 bits of entropy available)
[    8.934829] random: ubusd: uninitialized urandom read (4 bytes read, 104 bits of entropy available)
[    8.948583] random: ubusd: uninitialized urandom read (4 bytes read, 105 bits of entropy available)
[    8.956929] random: ubusd: uninitialized urandom read (4 bytes read, 106 bits of entropy available)
[    8.970312] random: ubusd: uninitialized urandom read (4 bytes read, 106 bits of entropy available)
[    8.982395] random: ubusd: uninitialized urandom read (4 bytes read, 107 bits of entropy available)
[    8.992604] procd: - init -
[    9.112780] random: nonblocking pool is initialized
[    9.697524] EXT4-fs (sda1): recovery complete
[    9.708266] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
[    9.869733] Adding 131068k swap on /dev/sda2.  Priority:-1 extents:1 across:131068k 
[   10.649637] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.705291] NET: Registered protocol family 8
[   10.708230] NET: Registered protocol family 20
[   10.766653] PPP generic driver version 2.4.2
[   10.800662] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.836600] Netfilter messages via NETLINK v0.30.
[   10.867047] ip_set: protocol 6
[   11.102095] IFX MEI Version 5.00.00
[   11.164986] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
[   11.193819] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[   11.200308] Backport generated by backports.git backports-20160324-13-g24da7d3c
[   11.215403] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.241502] ATM1.0.26    ATM (A1) firmware version 0.17
[   11.245278] ifxmips_atm: ATM init succeed
[   11.273765] Infineon Technologies DEU driver version 2.0.0 
[   11.277881] Danube Chip ver. 1.4 detected. 
[   11.304814] IFX DEU DES initialized (multiblock).
[   11.316430] IFX DEU AES initialized (multiblock).
[   11.320088] IFX DEU SHA1 initialized.
[   11.328559] IFX DEU MD5 initialized.
[   11.403678] nf_conntrack version 0.5.0 (937 buckets, 3748 max)
[   11.473797] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[   11.482245] owl-loader 0000:00:0e.0: fixup device configuration
[   11.488672] pci 0000:00:0e.0: [168c:0027] type 00 class 0x028000
[   11.488769] pci 0000:00:0e.0: reg 0x10: [mem 0x18000000-0x1800ffff]
[   11.488914] pci 0000:00:0e.0: PME# supported from D0 D3hot
[   11.489471] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[   11.508762] NET: Registered protocol family 24
[   11.571400] xt_time: kernel timezone is -0000
[   12.299381] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[   12.311148] ath: phy0: eeprom contains invalid mac address: 00:00:00:00:00:00
[   12.316847] ath: phy0: random mac address will be used: 46:96:39:84:34:8f
[   12.325201] ath: EEPROM regdomain: 0x37
[   12.325234] ath: EEPROM indicates we should expect a direct regpair map
[   12.325259] ath: Country alpha2 being used: AW
[   12.325280] ath: Regpair used: 0x37
[   12.337914] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.346954] ieee80211 phy0: Atheros AR9160 MAC/BB Rev:1 AR2133 RF Rev:b0 mem=0xb8000000, irq=30
[   12.408872] kmodloader: done loading kernel modules from /etc/modules.d/*
[   21.036879] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.055493] device eth0 entered promiscuous mode
[   21.072987] device eth0.1 entered promiscuous mode
[   21.087893] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   21.195851] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   22.397238] ath: EEPROM regdomain: 0x8348
[   22.397275] ath: EEPROM indicates we should expect a country code
[   22.397303] ath: doing EEPROM country->regdmn map search
[   22.397330] ath: country maps to regdmn code: 0x3a
[   22.397353] ath: Country alpha2 being used: US
[   22.397374] ath: Regpair used: 0x3a
[   22.397400] ath: regdomain 0x8348 dynamically updated by user
[   22.820387] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.836380] br-lan: port 1(eth0.1) entered forwarding state
[   22.840598] br-lan: port 1(eth0.1) entered forwarding state
[   22.846334] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   22.900283] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   24.844967] br-lan: port 1(eth0.1) entered forwarding state
[   25.327990] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.397359] device wlan0 entered promiscuous mode
[   28.242596] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   28.247775] br-lan: port 2(wlan0) entered forwarding state
[   28.252884] br-lan: port 2(wlan0) entered forwarding state
[   30.330900] br-lan: port 2(wlan0) entered forwarding state
[   32.691560] device wlan0.sta1 entered promiscuous mode
[   32.720871] br-lan: port 3(wlan0.sta1) entered forwarding state
[   32.725417] br-lan: port 3(wlan0.sta1) entered forwarding state
[   34.728242] br-lan: port 3(wlan0.sta1) entered forwarding state
[   39.668604] IPv6: ADDRCONF(NETDEV_UP): nas0: link is not ready
[   63.980800] [DSL_BSP_Showtime 894]: Datarate US intl = 1092666, fast = 0
[   63.986100] enter showtime, cell rate: 0 - 2577, 1 - 2577, xdata addr: 0x82be0000
[   63.993605] IPv6: ADDRCONF(NETDEV_CHANGE): nas0: link becomes ready
[   64.997268] eth0: tx ring full
[   65.968358] pppoe-wan: renamed from ppp0
[ 1751.047399] eth0: tx ring full
[ 1902.521176] eth0: tx ring full
[ 2143.258160] eth0: tx ring full
[ 2146.518662] eth0: tx ring full
[ 2223.428482] eth0: tx ring full
[ 2239.888722] eth0: tx ring full
[ 2243.247973] eth0: tx ring full
[ 2245.054283] eth0: tx ring full
[ 2246.288345] eth0: tx ring full
[ 2249.611091] eth0: tx ring full
[ 2250.455924] eth0: tx ring full
[ 2250.588518] eth0: tx ring full
[ 2258.861419] eth0: tx ring full
[ 2269.827816] eth0: tx ring full
[ 2272.862209] eth0: tx ring full
[ 2425.515514] eth0: tx ring full
[ 2516.783749] eth0: tx ring full
[ 2519.607658] eth0: tx ring full
[ 2601.461745] eth0: tx ring full
[ 2627.816628] eth0: tx ring full
[ 2627.864844] eth0: tx ring full
[ 2673.692438] eth0: tx ring full
[ 2673.762416] eth0: tx ring full
[ 2673.965346] eth0: tx ring full
[ 2674.499868] eth0: tx ring full
[ 2705.647434] eth0: tx ring full
[ 2708.611170] eth0: tx ring full
[ 2723.844603] eth0: tx ring full
[ 2807.813737] eth0: tx ring full
[ 2808.729392] eth0: tx ring full
[ 2816.697257] eth0: tx ring full
[ 2817.261323] eth0: tx ring full
[ 6328.327726] eth0: tx ring full
[ 6328.392700] eth0: tx ring full
[ 6328.861733] eth0: tx ring full
[15735.570622] eth0: tx ring full
[15738.884784] eth0: tx ring full
[15807.460162] eth0: tx ring full
[15808.438141] eth0: tx ring full
[15811.414092] eth0: tx ring full
[15896.230719] eth0: tx ring full
[15898.720603] eth0: tx ring full
[15898.882255] eth0: tx ring full
[15898.970973] eth0: tx ring full
[15899.126641] eth0: tx ring full
[15901.567257] eth0: tx ring full
[15984.121757] eth0: tx ring full
[19100.498356] eth0: tx ring full
[19100.951005] eth0: tx ring full
[19106.852503] eth0: tx ring full
[19116.416185] eth0: tx ring full
[19158.015643] eth0: tx ring full
[19766.978194] eth0: tx ring full
[19767.148348] eth0: tx ring full
[19767.463950] eth0: tx ring full
[19767.699791] eth0: tx ring full
[19769.093434] eth0: tx ring full
[19872.692062] eth0: tx ring full
[19954.218597] eth0: tx ring full
[20011.519744] eth0: tx ring full
[20012.013685] eth0: tx ring full
[20303.519192] eth0: tx ring full
[20303.570231] eth0: tx ring full
[20303.652010] eth0: tx ring full
[20303.971342] eth0: tx ring full
[20304.749457] eth0: tx ring full
[20305.500198] eth0: tx ring full
[20385.854344] eth0: tx ring full
[20385.905612] eth0: tx ring full
[20385.945290] eth0: tx ring full
[20385.990692] eth0: tx ring full
[20386.075070] eth0: tx ring full
[20392.962606] eth0: tx ring full
[22038.952618] eth0: tx ring full
[22039.499593] eth0: tx ring full
[22040.007869] eth0: tx ring full
[22040.189527] eth0: tx ring full
[22040.574095] eth0: tx ring full
[22040.612443] eth0: tx ring full
[22040.926333] eth0: tx ring full
[22659.864758] eth0: tx ring full
[22660.495852] eth0: tx ring full
[23257.228391] eth0: tx ring full
[23257.455571] eth0: tx ring full
[23257.603409] eth0: tx ring full
[23257.858200] eth0: tx ring full
[23258.046592] eth0: tx ring full
[25625.135877] eth0: tx ring full
[27730.082270] eth0: tx ring full
[27947.034117] eth0: tx ring full
[28025.635456] eth0: tx ring full
[28029.978561] eth0: tx ring full
[28112.744005] eth0: tx ring full
[28165.999901] eth0: tx ring full
[28166.173177] eth0: tx ring full
[28441.978538] eth0: tx ring full
[30040.128186] eth0: tx ring full
[30043.621253] eth0: tx ring full
[30045.811829] eth0: tx ring full
[30047.869733] eth0: tx ring full
[30103.293326] eth0: tx ring full
[30197.794092] eth0: tx ring full
[30199.050076] eth0: tx ring full
[30199.087910] eth0: tx ring full
[30199.423788] eth0: tx ring full
[34320.258818] eth0: tx ring full
[34320.377395] eth0: tx ring full
[34421.763795] eth0: tx ring full
[34422.045893] eth0: tx ring full
[34500.449922] eth0: tx ring full
[34500.841984] eth0: tx ring full
[34501.007997] eth0: tx ring full
[34707.465573] eth0: tx ring full
[34757.853116] eth0: tx ring full
[34758.050283] eth0: tx ring full
[34784.592386] eth0: tx ring full
[35146.884188] eth0: tx ring full
[35146.981132] eth0: tx ring full
[35146.988358] eth0: tx ring full
[35146.999077] eth0: tx ring full
[35150.009918] eth0: tx ring full
[36428.384476] eth0: tx ring full
[36428.621859] eth0: tx ring full
[38141.261431] eth0: tx ring full
[42949.938947] eth0: tx ring full
[42950.774024] eth0: tx ring full
[42950.876050] eth0: tx ring full
[42950.943942] eth0: tx ring full
[42951.016924] eth0: tx ring full
[42951.366590] eth0: tx ring full
[42951.465679] eth0: tx ring full
[42951.597091] eth0: tx ring full
[42951.664815] eth0: tx ring full
[42952.438956] eth0: tx ring full
[42952.516928] eth0: tx ring full
[42952.677737] eth0: tx ring full
[42952.726861] eth0: tx ring full
[42952.777372] eth0: tx ring full
[42952.828522] eth0: tx ring full
[42952.910972] eth0: tx ring full
[42952.966874] eth0: tx ring full
[42953.043049] eth0: tx ring full
[42953.086207] eth0: tx ring full
[42953.161355] eth0: tx ring full
[42953.204563] eth0: tx ring full
[42953.283231] eth0: tx ring full
[42953.366556] eth0: tx ring full
[42953.412652] eth0: tx ring full
[42953.458071] eth0: tx ring full
[42959.640264] eth0: tx ring full
[42960.281323] eth0: tx ring full
[42960.367638] eth0: tx ring full
[42960.419640] eth0: tx ring full
[42960.472884] eth0: tx ring full
[42960.514275] eth0: tx ring full
[42964.767985] eth0: tx ring full
[42964.881546] eth0: tx ring full
[43931.097063] pppoe-wan: renamed from ppp0
[43932.265643] eth0: tx ring full
[43932.320769] eth0: tx ring full
[43932.646469] eth0: tx ring full
[43935.744613] eth0: tx ring full
[43936.857861] eth0: tx ring full
[43938.431392] eth0: tx ring full
[43939.592561] eth0: tx ring full
[43944.827019] eth0: tx ring full
[43945.171647] eth0: tx ring full
[43951.549923] eth0: tx ring full
[43959.589918] eth0: tx ring full
[43959.655578] eth0: tx ring full
[43970.269586] eth0: tx ring full
[43987.025093] eth0: tx ring full
[43987.084833] eth0: tx ring full
[43987.159852] eth0: tx ring full
[44000.843294] eth0: tx ring full
[44000.903274] eth0: tx ring full
[44001.027860] eth0: tx ring full
[44028.851443] eth0: tx ring full
[44030.381791] eth0: tx ring full
[44030.440126] eth0: tx ring full
[44030.592628] eth0: tx ring full
[44036.931336] eth0: tx ring full
[44038.468842] eth0: tx ring full
[44038.504444] eth0: tx ring full
[44053.817125] eth0: tx ring full
[44057.927477] eth0: tx ring full
[44058.029306] eth0: tx ring full
[44060.524705] eth0: tx ring full
[44060.564667] eth0: tx ring full
[44060.686983] eth0: tx ring full
[44060.889996] eth0: tx ring full
[44061.908728] eth0: tx ring full
[44062.137966] eth0: tx ring full
[44063.344457] eth0: tx ring full
[44065.908146] eth0: tx ring full
[44068.721678] eth0: tx ring full
[44069.998352] eth0: tx ring full
[44074.904293] eth0: tx ring full
[44076.275575] eth0: tx ring full
[44078.774601] eth0: tx ring full
[44079.733673] eth0: tx ring full
[44079.881001] eth0: tx ring full
[44079.936465] eth0: tx ring full
[44080.897424] eth0: tx ring full
[44081.065809] eth0: tx ring full
[44082.301993] eth0: tx ring full
[44083.516338] eth0: tx ring full
[44083.584709] eth0: tx ring full
[44090.647089] eth0: tx ring full
[44113.244090] eth0: tx ring full
[44115.043025] eth0: tx ring full
[44118.121896] eth0: tx ring full
[44118.173463] eth0: tx ring full
[44119.031389] eth0: tx ring full
[44119.187683] eth0: tx ring full
[44119.249342] eth0: tx ring full
[44119.341213] eth0: tx ring full
[44122.446277] eth0: tx ring full
[44122.533108] eth0: tx ring full
[44129.895672] eth0: tx ring full
[44129.970884] eth0: tx ring full
[44130.052009] eth0: tx ring full
[44131.758292] eth0: tx ring full
[44131.838356] eth0: tx ring full
[44131.857476] eth0: tx ring full
[44131.919245] eth0: tx ring full
[44132.208855] eth0: tx ring full
[44132.268486] eth0: tx ring full
[44133.238833] eth0: tx ring full
[44133.632305] eth0: tx ring full
[44133.734402] eth0: tx ring full
[44134.254265] eth0: tx ring full
[44134.331669] eth0: tx ring full
[44136.437244] eth0: tx ring full
[44137.623479] eth0: tx ring full
[44154.038566] eth0: tx ring full
[44154.224960] eth0: tx ring full
[44154.468457] eth0: tx ring full
[44154.526942] eth0: tx ring full
[44154.604220] eth0: tx ring full
[44157.831404] eth0: tx ring full
[44157.895271] eth0: tx ring full
[44160.213616] eth0: tx ring full
[44164.852913] eth0: tx ring full
[44164.925561] eth0: tx ring full
[44165.046691] eth0: tx ring full
[44175.791876] eth0: tx ring full
[44176.003264] eth0: tx ring full
[44179.011414] eth0: tx ring full
[44179.060776] eth0: tx ring full
[44179.201263] eth0: tx ring full
[44180.631599] eth0: tx ring full
[44180.772604] eth0: tx ring full
[44180.892723] eth0: tx ring full
[44182.629672] eth0: tx ring full
[44182.689600] eth0: tx ring full
[44182.827388] eth0: tx ring full
[44183.375535] eth0: tx ring full
[44184.035557] eth0: tx ring full
[44184.117316] eth0: tx ring full
[44186.884009] eth0: tx ring full
[44189.970561] eth0: tx ring full
[44191.964088] eth0: tx ring full
[44192.056210] eth0: tx ring full
[44194.203009] eth0: tx ring full
[44195.170466] eth0: tx ring full
[44199.248112] eth0: tx ring full
[44199.342721] eth0: tx ring full
[44201.251077] eth0: tx ring full
[44202.152566] eth0: tx ring full
[44202.197567] eth0: tx ring full
[44203.186316] eth0: tx ring full
[44203.367517] eth0: tx ring full
[44203.410356] eth0: tx ring full
[44204.290746] eth0: tx ring full
[44204.363743] eth0: tx ring full
[44204.452740] eth0: tx ring full
[44204.600115] eth0: tx ring full
[44204.835943] eth0: tx ring full
[44204.891838] eth0: tx ring full
[44204.960019] eth0: tx ring full
[44207.703249] eth0: tx ring full
[44207.764557] eth0: tx ring full
[44208.078064] eth0: tx ring full
[44208.220652] eth0: tx ring full
[44208.317662] eth0: tx ring full
[44210.403972] eth0: tx ring full
[44210.812393] eth0: tx ring full
[44211.382622] eth0: tx ring full
[44212.199571] eth0: tx ring full
[44213.240191] eth0: tx ring full
[44222.213585] eth0: tx ring full
[44222.342522] eth0: tx ring full
[44222.591659] eth0: tx ring full
[44224.944630] eth0: tx ring full
[44228.974362] eth0: tx ring full
[44232.074372] eth0: tx ring full
[44232.169398] eth0: tx ring full
[44234.279705] eth0: tx ring full
[44234.990763] eth0: tx ring full
[44235.034239] eth0: tx ring full
[44237.443078] eth0: tx ring full
[44237.498241] eth0: tx ring full
[44238.950094] eth0: tx ring full
[44239.166380] eth0: tx ring full
[44239.209307] eth0: tx ring full
[44241.447317] eth0: tx ring full
[44242.333302] eth0: tx ring full
[44242.438482] eth0: tx ring full
[44242.569456] eth0: tx ring full
[44243.551450] eth0: tx ring full
[44244.838978] eth0: tx ring full
[44245.373908] eth0: tx ring full
[44245.813051] eth0: tx ring full
[44245.961066] eth0: tx ring full
[44246.785065] eth0: tx ring full
[44246.934422] eth0: tx ring full
[44247.953745] eth0: tx ring full
[44248.155734] eth0: tx ring full
[44248.351817] eth0: tx ring full
[44249.150433] eth0: tx ring full
[44251.751469] eth0: tx ring full
[44252.416446] eth0: tx ring full
[44253.567632] eth0: tx ring full
[44253.811640] eth0: tx ring full
[44254.331076] eth0: tx ring full
[44254.512355] eth0: tx ring full
[44254.720964] eth0: tx ring full
[44255.060524] eth0: tx ring full
[44255.127890] eth0: tx ring full
[44255.341410] eth0: tx ring full
[44257.121620] eth0: tx ring full
[44257.522704] eth0: tx ring full
[44257.937704] eth0: tx ring full
[44258.044733] eth0: tx ring full
[44259.710335] eth0: tx ring full
[44260.036279] eth0: tx ring full
[44260.101380] eth0: tx ring full
[44262.128394] eth0: tx ring full
[44262.191577] eth0: tx ring full
[44263.366937] eth0: tx ring full
[44265.131213] eth0: tx ring full
[44265.215646] eth0: tx ring full
[44266.845842] eth0: tx ring full
[44268.178983] eth0: tx ring full
[44269.397868] eth0: tx ring full
[44270.357064] eth0: tx ring full
[44271.942117] eth0: tx ring full
[44273.757873] eth0: tx ring full
[44273.985943] eth0: tx ring full
[44275.192835] eth0: tx ring full
[44275.288859] eth0: tx ring full
[44276.801024] eth0: tx ring full
[44279.229953] eth0: tx ring full
[44279.410629] eth0: tx ring full
[44279.473978] eth0: tx ring full
[44279.540150] eth0: tx ring full
[44279.905535] eth0: tx ring full
[44280.156999] eth0: tx ring full
[44280.295102] eth0: tx ring full
[44281.907118] eth0: tx ring full
[44282.198669] eth0: tx ring full
[44282.263901] eth0: tx ring full
[44282.934479] eth0: tx ring full
[44287.074998] eth0: tx ring full
[44288.402639] eth0: tx ring full
[44289.705923] eth0: tx ring full
[44289.935390] eth0: tx ring full
[44290.079374] eth0: tx ring full
[44290.148217] eth0: tx ring full
[44290.492600] eth0: tx ring full
[44290.886904] eth0: tx ring full
[44291.022995] eth0: tx ring full
[44291.542185] eth0: tx ring full
[44291.609559] eth0: tx ring full
[44291.702125] eth0: tx ring full
[44291.913105] eth0: tx ring full
[44294.118224] eth0: tx ring full
[44294.487795] eth0: tx ring full
[44297.213695] eth0: tx ring full
[44297.273446] eth0: tx ring full
[44297.424169] eth0: tx ring full
[44297.725371] eth0: tx ring full
[44297.964964] eth0: tx ring full
[44298.178107] eth0: tx ring full
[44298.279994] eth0: tx ring full
[44298.341052] eth0: tx ring full
[44298.709637] eth0: tx ring full
[44298.902312] eth0: tx ring full
[44299.107444] eth0: tx ring full
[44303.382071] eth0: tx ring full
[44303.467378] eth0: tx ring full
[44303.881013] eth0: tx ring full
[44304.706256] eth0: tx ring full
[44305.250907] eth0: tx ring full
[44306.923757] eth0: tx ring full
[44307.201797] eth0: tx ring full
[44307.306359] eth0: tx ring full
[44307.571467] eth0: tx ring full
[44308.677420] eth0: tx ring full
[44309.572257] eth0: tx ring full
[44310.354243] eth0: tx ring full
[44310.464527] eth0: tx ring full
[44311.364942] eth0: tx ring full
[44312.279103] eth0: tx ring full
[44312.516491] eth0: tx ring full

Using Lede 17.01.4:

BusyBox v1.25.1 () built-in shell (ash)

     _________
    /        /\      _    ___ ___  ___
   /  LE    /  \    | |  | __|   \| __|
  /    DE  /    \   | |__| _|| |) | _|
 /________/  LE  \  |____|___|___/|___|                      lede-project.org
 \        \   DE /
  \    LE  \    /  -----------------------------------------------------------
   \  DE    \  /    Reboot (17.01.4, r3560-79f57e422d)
    \________\/    -----------------------------------------------------------


13.09.20181844Base systemBug ReportVery LowHighR7800 ipv6 connectivityTrunkUnconfirmed Task Description

Hello,

ipv6 does not work properly on my Netgear R7800. I am running OpenWrt 18.6.1. The device gets a ipv6 address assigned, but I cannot ping any ipv6 address. Furthermore, I get the following error:
# ping6 google.de
PING google.de (2607:f8b0:4000:817::2003): 56 data bytes
ping6: sendto: Permission denied

After running the command
# tcpdump -i eth0 -vv
for some time, ipv6 connectivity works, I am able to ping an ipv6 address, also pinging from another host and establishing v6 connections is working.
# ping6 google.de
PING google.de (2607:f8b0:4000:817::2003): 56 data bytes
64 bytes from 2607:f8b0:4000:817::2003: seq=0 ttl=51 time=118.360 ms
64 bytes from 2607:f8b0:4000:817::2003: seq=1 ttl=51 time=118.626 ms

However, after some time, this is not working anymore and I have to restart the tcpdump command.

This must be a device specific issue, since my other Netgear Router (WNDR3700) running 18.06.1 is working flawlessly.


25.09.20181868KernelBug ReportVery LowHighkmod-netem: Unable to handle kernel NULL pointer derefe...TrunkUnconfirmed Task Description

Device is WRT1900ACv2, kernel version is 4.14.71
It is simple to reproduce, just invoke netem such as `tc qdisc add dev eth1 root netem delay 100ms`, it will crash immediately

01.10.20181877KernelBug ReportVery LowHighSD Card corruption on reboot after power failureTrunkUnconfirmed Task Description

- problem occurs on zbt-we1326 with mt7621 cpu with mtk_sd kernel module loaded.
- openwrt latest snapshot(30-08-2017) firmware downloaded from openwrt.
- Steps to reproduce
1. setup extroot on the sdcard with a partition of 1gb(ext4)(boot) mounted as /overlay and 31gb(f2fs)(data) mounted at /media/
2. works fine on normal reboot(through ui).
3. turn off router power and start the router by plugging back in. notice corruption of extroot or data folder or both . it doesn’t happen rarely but it definitely happens on subsequent power off/on cycle.

 


07.10.20181883Base systemBug ReportVery LowHighWAN interface VLAN not working on AVM FRITZ!Box 4040TrunkUnconfirmed Task Description

WAN interface of AVM FRITZ!Box 4040 is on eth1. To gain internet connectivity the ISP requires VLAN tagging with ID 7. But while I can send packets through interface eth1, I cannot through eth1.7.

Affected device: https://openwrt.org/toh/hwdata/avm/avm_fritz_box_4040 Affected versions: All I have tested, that is: 18.06.1 and the snapshot available today.

I haven’t seen any disturbing firewall rules and it still doesn’t work after flushing iptables completely.

Steps to reproduce:

- flash OpenWrt 18.06.1 to FRITZ!Box 4040
- change WAN ifname to eth1.7
- connect WAN port to laptop or monitoring device with Wireshark or similar
- send something via eth1.7, e.g. ping, but dhcp or pppd are sending stuff anyway

What happens:

Monitoring device does not see pings, dhcp, pppoe or other packets that go through eth1.7. It received when sending via eth1 directly (untagged). When sniffing via tcpdump on the router, it looks like the packets are send, but they are actually not going over the wire.

What should happen:

VLAN tagged packets are send properly (so PPPoE discovery succeeds in the end).

It was advised to open this bug report in the following forum thread. There is also some more information including configuration dumps. https://forum.openwrt.org/t/vlan-configuration-for-telekom/21841

13.10.20181893Base systemBug ReportVery LowHighRouting/NAT Offloading now working with VoIP/IPTV VLANsTrunkUnconfirmed Task Description

I’m using the latest build OpenWrt 18.06.1 r7258-5eb055306f / LuCI openwrt-18.06 branch (git-18.284.42397-55ebe88)

With ZBT-WG3526 (16M), MediaTek MT7621 ver:1 eco:3.

I’ve VLANs for VoIP and IPTV.

If I enable Routing/NAT Offloading (tried both options (software and hardware), it looks that this feature doesn’t allows the VoIP and IPTV traffic to work as it was doing previously.+

I know this is experimental and may be still needs some more testing, etc., but I just wanted to let the developers know about this issue, in case, they haven’t realized it.

29.10.20181917Base systemBug ReportVery LowHighMT7621 hw offloading crashingTrunkUnconfirmed Task Description

I’m using the latest build OpenWrt 18.06.1 r7258-5eb055306f / LuCI openwrt-18.06 branch (git-18.284.42397-55ebe88)

With ZBT-WG3526 (16M), MediaTek MT7621 ver:1 eco:3.

Using HW offloading makes systems unstable after less than 24 hours.

I’ve tested it during several days. Now using SW offloading seems to be working ok.

I’ve posted traces here:

https://forum.openwrt.org/t/mt7621-offloading-reboots/24043

01.11.20181922Base systemBug ReportVery LowHighBuilding on mac os 10.13.6 fails due to perl issues wit...TrunkUnconfirmed Task Description

Attempting to build latest OpenWrt firmware for NETGEAR R7800 (arm-openwrt-linux-musl) fails with Perl errors about dynamic module loading:

/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/hostpkg/usr/bin/perl5.28.0 files/perlconfig.pl -Dowrt:target_cc='arm-openwrt-linux-muslgnueabi-gcc' -Dowrt:gccversion="7.3.0" -Dowrt:target_cross='arm-openwrt-linux-muslgnueabi-' -Dowrt:cflags='-O2 -pipe -mcpu=cortex-a9 -mfpu=vfp3 -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -I/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/usr/include -I/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/include -I/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-7.3.0_musl_eabi/usr/include -I/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-7.3.0_musl_eabi/include/fortify -I/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-7.3.0_musl_eabi/include' -Dowrt:ldflags='-L/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/usr/lib -L/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/lib -L/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-7.3.0_musl_eabi/usr/lib -L/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-7.3.0_musl_eabi/lib -znow -zrelro' -Dowrt:libc="musl" -Dowrt:ipv6=undef -Dowrt:threads=no -Dowrt:staging_dir='/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi' -Dowrt:host_perl_prefix='/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/hostpkg/usr' files/version.config files/base.config files/arm.config files/architecture.config files/signal.config files/threads.config files/libc.config files/misc.config > /Volumes/OpenWrt/NETGEAR_R7800/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/perl/perl-5.28.0/config.sh
Can't load module List::Util, dynamic loading not available in this perl.
  (You may need to build a new perl executable which either supports
  dynamic loading or has the List::Util module statically linked into it.)
 at files/perlconfig.pl line 229.
Compilation failed in require at files/perlconfig.pl line 229.
BEGIN failed--compilation aborted at files/perlconfig.pl line 229.
make[3]: *** [/Volumes/OpenWrt/NETGEAR_R7800/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/perl/perl-5.28.0/.configured_68b329da9893e34099c7d8ad5cb9c940] Error 255
make[3]: Leaving directory `/Volumes/OpenWrt/NETGEAR_R7800/feeds/packages/lang/perl'
time: package/feeds/packages/perl/compile#0.25#0.13#0.66
make[2]: *** [package/feeds/packages/perl/compile] Error 2
make[2]: Leaving directory `/Volumes/OpenWrt/NETGEAR_R7800'
make[1]: *** [/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory `/Volumes/OpenWrt/NETGEAR_R7800'
make: *** [world] Error 2
15.11.20181952Base systemBug ReportVery LowHighwifi with hidden ssid and mac-filter doesn't work on IO...AllUnconfirmed Task Description

on tp-link_tl-wr842nd_v1 18.06 and 18.06.1

If hidden ssid and mac-filter is enabled, IOS 12 doesn't able to connect on this wifi network.

But if ssid broadcast is running with mac-filter enabled or ssid broadcast hidden and mac-filter disabled, then it works.

15.11.20181953Base systemBug ReportVery LowHighAsus RT N56U 5GHz radio doesn't work if 2.4GHz radio is...TrunkUnconfirmed Task Description

Version: 18.06.1
Asus RT N56U

When the 2.4GHz radio is enabled, the 5GHz radio does not function when both are set to US country code.

Steps to reproduce:
Set up radio 1 and radio 2 with US country codes.
Reboot.
Only the 2.4GHz radio will work.
If you disable the 2.4GHz and reboot, the 5GHz will work.

Any additional info you thinks is important:
Tried all workarounds listed.
More information about a bug in the original firmware fixed in Padavan’s firmware related to the 5GHz radio can be found here:
https://dev.archive.openwrt.org/ticket/17659.html#comment:23

Workaround:
Set the 2.4GHz radio country code to World (00) and reboot. Leave the 5GHz on US. Now both radios work.

24.12.20182024Base systemBug ReportVery LowHighsysupgrade silently does nothing in case of active swap...TrunkUnconfirmed Task Description

Trying sysupgrade on my ZBT WE1026, with SD-Card installed, and swap file active on it, silently does not succeed.

However, as I am using ‘sysupgrade -v -n -f /tmp/some_pars.tar.gz /tmp/fw.bin’ the files from some_pars.tar.gz are applied to unmodified system, resulting in inconsistencies.

Doing swapoff before
sysupgrade fixed my problem.

sysupgrade should at least issue an error message, when it does not succeed.
As I suspect, that unsuccessful umount of my block device with swap-file open is the culprit.


05.02.20192101Base systemBug ReportVery LowHighWDS bridge and PPPoE MTU problemAllUnconfirmed Task Description

Device: Netgear R7800
This issue is not present with original Netgear firmware and is not present with LEDE 17 (older kernel).

Preface:
I have very strange issue with interfaces MTU and it looks to be introduced with newer kernel (4.14).

My network is attached as a png:
1. my ISP uses VDSL, i just have a PPPoE (MTU=1492) on the ethernet interface through the ISP modem
2. all other internal clients and routers interfaces have MTU=1500

Ping from R7800 to 1.1.1.1 with 2000 packet size and fragmentation allowed = success
Ping from ArcherC7v2 to R7800 with 2000 packet size and fragmentation allowed = success
Ping from PC1 to R7800 with 2000 packet size and fragmentation allowed = success
Ping from PC2 to R7800 with 2000 packet size and fragmentation allowed = success
Ping from PC1 to 1.1.1.1 with 2000 packet size and fragmentation allowed = failure
Ping from PC2 to 1.1.1.1 with 2000 packet size and fragmentation allowed = success

Now the fun part:
Ping from PC1 to 1.1.1.1 with 1473 packet size and fragmentation allowed = failure
Ping from PC1 to 1.1.1.1 with 1472 packet size (1492-20) and fragmentation allowed = success

It seems a WDS (4addr) problem combined with PPPoE being at MTU=1492 at this point, but:
Ping from ArcherC7v2 to 1.1.1.1 with 2000 packet size and fragmentation allowed = success

I’ve messed up with MTU on all the interfaces, the only thing that fix the issue is setting the br-lan interface of the R7800 to MTU=1491, as soon as the bridge has MTU>1491 the pings fail.

R7800 network config

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '1 2 3 4 6t'

config switch_vlan
        option device 'switch0'
        option vlan '2'
        option ports '5 0t'

config interface 'lan'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option stp '1'
        option mtu '1500'
        option ifname 'eth1.1'

config interface 'TIM_FTTC'
        option proto 'pppoe'
        option ifname 'eth0.2'
        option username '***'
        option password '***'
        option ipv6 'auto'
        option metric '1'
        option peerdns '0'
        option keepalive '5 6'

R7800 wireless config

config wifi-device 'radio0'
        option type 'mac80211'
        option hwmode '11a'
        option path 'soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0'
        option htmode 'VHT80'
        option channel '136'
        option txpower '23'
        option country 'US'
        option legacy_rates '0'
        option noscan '1'

config wifi-iface 'default_radio0'
        option device 'radio0'
        option mode 'ap'
        option ssid '***'
        option encryption 'psk2+ccmp'
        option key '***'
        option wps_pushbutton '0'
        option network 'lan'
        option wds '1'

ArcherC7v2 network config

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '1 2 3 4 6t'

config switch_vlan
        option device 'switch0'
        option vlan '2'
        option ports '5 0t'

config interface 'lan'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.2'
        option netmask '255.255.255.0'
        option stp '1'
        option mtu '1500'
        option ifname 'eth1.1'

ArcherC7v2 wireless config

config wifi-device 'radio0'
        option type 'mac80211'
        option channel '36'
        option hwmode '11a'
        option path 'pci0000:01/0000:01:00.0'
        option htmode 'VHT80'
        option txpower '23'
        option country 'US'
        option legacy_rates '0'
        option noscan '1'

config wifi-iface 'default_radio0'
        option device 'radio0'
        option mode 'sta'
        option wds '1'
        option ssid '***'
        option encryption 'psk2+ccmp'
        option key '***'
        option wps_pushbutton '0'
        option network 'lan'

WAN zone on firewall on R7800 has

option mtu_fix '1'
11.02.20192118OtherFeature RequestVery LowHighRenaming pre-configured firewall-zone names...AllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
This is a suggestion and is not a model-specific bug report.

- Software versions of OpenWrt/LEDE release, packages, etc.
OpenWrt 18.06.1, r7258-5eb055306f

- Steps to reproduce
Description below:

This is a decade-old suggestion I’ve held within and I really hope the words will gather enough attention and momentum of the dev team. Streight to the conclusion, two pre-configured firewall-zones IMHO should be renamed from “lan” to “internal” and “wan” to “external” respectively. There are a few reasons for which I confidently feel this should be done. I’d like to argue that this is important if not essential because;
a.)Those who prefer making changes to current configurations by editing /etc/config/*, using stuff like “sed -i ‘s/before/after/g’ ${file}” (and then proceeding to reboot) is powerful and is almost mistake-free. checking for config-mistakes using grep is also powerful (and this applies to folks using uci CUI tool as well). What I do now is rename these two zones from GUI and then proceed to these steps, and it works great but having to take this extra step is rather inconvenient if not annoying.
b.)Current presets for interfaces have IPv4-WAN named as “wan” and IPv6-WAN named as “wan6” where the IPv4-WAN‘s label “wan” is no different from the firewalled-zone labeled as “wan”. This is simply comfusing. In early days when I I had just heard about the OpenWrt and had started messing with releases like Kamikaze,I had hard times understanding which string corresponded to which (sure you may argue this is documented in details but things don’t work like that for newbies).
c.)If needs for either firewall-zones or the interface-labels to be renamed are understood, I’d then have to say I’m against renaming interface-labels because those who’d decide to use VLANs would most likely name the interfaces as “config interface ‘vlan_ID’” and the string lan would stay in there.

I hope the above proposal is powerful enough...

23.02.20192141Base systemBug ReportVery LowHighOn router Linksys EA6350v3, Luci shows missing port on ...TrunkUnconfirmed Task Description

Hi!

I am using OpenWRT development from Feb21 on my Linksys EA6350v3 router. So far, everything works fine, however I am trying to setup the WAN port with a VLAN, but if I access: Luci → Network → Switch it only displays the CPU port and the 4 LAN ports, the WAN port is not displayed, but if I access the router via SSH, then the port is there on swconfig:

root@wl:~# swconfig dev switch0 show
Global attributes:

enable_vlan: 1
enable_mirror_rx: 0
enable_mirror_tx: 0
mirror_monitor_port: 0
mirror_source_port: 0
linkdown: ???

Port 0:

mib: Port 0 MIB counters

RxBroad : 722
RxPause : 0
RxMulti : 2898
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 34565
Rx128Byte : 717134
Rx256Byte : 12692
Rx512Byte : 7510
Rx1024Byte : 7809
Rx1518Byte : 141976
RxMaxByte : 193165
RxTooLong : 0
RxGoodByte : 573563874
RxBadByte : 0
RxOverFlow : 0
Filtered : 4
TxBroad : 3813
TxPause : 0
TxMulti : 73600
TxUnderRun : 0
Tx64Byte : 62619
Tx128Byte : 115302
Tx256Byte : 15655
Tx512Byte : 41091
Tx1024Byte : 34454
Tx1518Byte : 2869708
TxMaxByte : 0
TxOverSize : 0
TxByte : 4378564661
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0

pvid: 1
link: port:0 link:up speed:1000baseT full-duplex txflow rxflow 

Port 1:

mib: Port 1 MIB counters

RxBroad : 10
RxPause : 0
RxMulti : 126
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 40
Rx128Byte : 534
Rx256Byte : 313
Rx512Byte : 38
Rx1024Byte : 18
Rx1518Byte : 15
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 141761
RxBadByte : 0
RxOverFlow : 0
Filtered : 13
TxBroad : 180
TxPause : 0
TxMulti : 367
TxUnderRun : 0
Tx64Byte : 335
Tx128Byte : 362
Tx256Byte : 279
Tx512Byte : 216
Tx1024Byte : 29
Tx1518Byte : 52
TxMaxByte : 0
TxOverSize : 0
TxByte : 274900
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0

pvid: 1
link: port:1 link:down

Port 2:

mib: Port 2 MIB counters

RxBroad : 0
RxPause : 0
RxMulti : 0
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 0
Rx128Byte : 0
Rx256Byte : 0
Rx512Byte : 0
Rx1024Byte : 0
Rx1518Byte : 0
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 0
RxBadByte : 0
RxOverFlow : 0
Filtered : 0
TxBroad : 4419
TxPause : 0
TxMulti : 76469
TxUnderRun : 0
Tx64Byte : 46240
Tx128Byte : 1084
Tx256Byte : 2641
Tx512Byte : 28047
Tx1024Byte : 2915
Tx1518Byte : 1
TxMaxByte : 0
TxOverSize : 0
TxByte : 18438433
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0

pvid: 1
link: port:2 link:up speed:100baseT full-duplex txflow rxflow auto

Port 3:

mib: Port 3 MIB counters

RxBroad : 0
RxPause : 0
RxMulti : 0
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 0
Rx128Byte : 0
Rx256Byte : 0
Rx512Byte : 0
Rx1024Byte : 0
Rx1518Byte : 0
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 0
RxBadByte : 0
RxOverFlow : 0
Filtered : 0
TxBroad : 4419
TxPause : 0
TxMulti : 76469
TxUnderRun : 0
Tx64Byte : 46240
Tx128Byte : 1084
Tx256Byte : 2641
Tx512Byte : 28047
Tx1024Byte : 2915
Tx1518Byte : 1
TxMaxByte : 0
TxOverSize : 0
TxByte : 18438433
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0

pvid: 1
link: port:3 link:up speed:1000baseT full-duplex auto

Port 4:

mib: Port 4 MIB counters

RxBroad : 3765
RxPause : 0
RxMulti : 73151
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 62113
Rx128Byte : 115122
Rx256Byte : 15386
Rx512Byte : 40931
Rx1024Byte : 34440
Rx1518Byte : 2869706
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 4378395323
RxBadByte : 0
RxOverFlow : 0
Filtered : 11
TxBroad : 379
TxPause : 0
TxMulti : 2755
TxUnderRun : 0
Tx64Byte : 34306
Tx128Byte : 717333
Tx256Byte : 12274
Tx512Byte : 7258
Tx1024Byte : 7735
Tx1518Byte : 335099
TxMaxByte : 0
TxOverSize : 0
TxByte : 569081244
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0

pvid: 1
link: port:4 link:up speed:1000baseT full-duplex txflow rxflow auto

Port 5:

mib: Port 5 MIB counters

RxBroad : 38
RxPause : 0
RxMulti : 323
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 526
Rx128Byte : 312
Rx256Byte : 54
Rx512Byte : 205
Rx1024Byte : 23
Rx1518Byte : 30
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 217499
RxBadByte : 0
RxOverFlow : 0
Filtered : 9
TxBroad : 348
TxPause : 0
TxMulti : 259
TxUnderRun : 0
Tx64Byte : 344
Tx128Byte : 406
Tx256Byte : 200
Tx512Byte : 199
Tx1024Byte : 20
Tx1518Byte : 13
TxMaxByte : 0
TxOverSize : 0
TxByte : 194389
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0

pvid: 1
link: port:5 link:down

VLAN 1:

vid: 1
ports: 0 1 2 3 4 5 

VLAN 2:

vid: 2
ports: 0t 5t 

root@wl:~#

So the firmware knows there is an additional port in the switch, it’s just Luci that does not display it.

For extra info, here’s the OpenWRT version I am running:

BusyBox v1.30.1 () built-in shell (ash)

_______                     ________        __

| |.—–.—–.—–.| | | |.—-.| |_
| - || _ | -| || | | || _|| _|
|
_|| |_||||||| ||

        |__| W I R E L E S S   F R E E D O M

—————————————————– OpenWrt SNAPSHOT, r9414-2d13945


Thanks in advance for your help with this, very appreciated.


27.02.20192150KernelBug ReportVery LowHighCrashlogs are empty/borken - TD-W8970 v1AllUnconfirmed Task Description

Device TD-W8970 v1.
Lot of crashes, all does not produce anything on logs (even tried to crank up log levels and saving to USB, to be sure to read last lines logged, but no errors is shown).
After the automatic reboot I can see the message

Crashlog allocated RAM at address 0x3f00000

with logread.
No log file is generated inside

/sys/kernel/debug

.
I compiled a custom image with

/dev/mem

enabled and dumped the memory after 0x3f00000 (basically last MB of ram available) and I can only see the bytes “A1 EE DE AD” followed by ~1KB of “00” and after that probably other programs code.

In this thread there is the full explanation about how this device is currently unstable, and having no logs available makes debugging x10 times harder..

29.03.20192209Base systemBug ReportVery LowHighInconsistent behaviour of HOST_CONFIGURE_CMD vs CONFIGU...TrunkUnconfirmed Task Description

Target checks via:

if [ -x $(CONFIGURE_CMD) ]; then

yet host does:

if [ -x configure ]; then

So trying to use this, will fail for the target, but not for the host.

CONFIGURE_CMD = ./buildtools/bin/waf configure
HOST_CONFIGURE_CMD = ./buildtools/bin/waf configure

This results in

./buildtools/bin/waf: binary operator expected

for the target.

The check is flawed in both cases, the host does not check for the custom configure command and the target is doing a file check only, so you have to ensure the actual “configure” argument is first in the CONFIGURE_ARGS.

CONFIGURE_ARGS:=configure $(CONFIGURE_ARGS)

This is confusing and both cases should work similar and check for CONFIGURE_CMD and maybe we should add a CONFIGURE_CMD_ARGS variable, that can hold custom arguments.

03.04.20192220Base systemBug ReportVery LowHighath10k NEW kernel thread crash in CT htt firmware - ath...TrunkUnconfirmed Task Description

OpenWrt SNAPSHOT, r9754-fbe2e7d15e
Trunk Pulled April 1st.
Archer C7v2

Unclear how to reproduce, just happens.

Supplying init logs and kernel trace logs:

[ 31.099086] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x3c.
[ 31.108127] PCI: Enabling device 0000:00:00.0 (0000 → 0002)
[ 31.116173] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 31.389333] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:00:00.0.txt failed with error -2
[ 31.400044] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 31.491602] firmware ath10k!fwcfg-pci-0000:00:00.0.txt: firmware_loading_store: map pages failed
[ 31.500774] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[ 31.511656] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 31.687486] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 31.696848] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[ 31.707378] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 31.949406] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-5.bin failed with error -2
[ 31.960559] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 32.095183] firmware ath10k!QCA988X!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 32.104800] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-2.bin failed with error -2
[ 32.115944] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 32.291783] firmware ath10k!QCA988X!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 32.301402] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[ 32.312279] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 32.487841] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 32.497209] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
[ 32.508092] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 32.684408] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
[ 32.693770] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
[ 32.704646] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 32.879819] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
[ 32.889172] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
[ 32.900050] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 33.076143] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
[ 33.089091] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 33.098473] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 33.110860] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-fW-022-883e26a8 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT crc32 7a67ce60
[ 33.219987] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 33.230599] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 33.382851] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 33.392104] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 34.332647] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[ 34.350100] ath10k_pci 0000:00:00.0: wmi print ‘P 128 V 8 T 410’ [ 34.356422] ath10k_pci 0000:00:00.0: wmi print ‘msdu-desc: 1424 sw-crypt: 0 ct-sta: 0’ [ 34.364543] ath10k_pci 0000:00:00.0: wmi print ‘alloc rem: 24680 iram: 26872’ [ 34.432688] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[ 34.445504] ath10k_pci 0000:00:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0×10000000 [ 34.579131] ath: EEPROM regdomain: 0×0 [ 34.579137] ath: EEPROM indicates default country code should be used
[ 34.579140] ath: doing EEPROM country→regdmn map search
[ 34.579152] ath: country maps to regdmn code: 0x3a
[ 34.579158] ath: Country alpha2 being used: US
[ 34.579161] ath: Regpair used: 0x3a
[ 34.652355] ath: EEPROM regdomain: 0×0 [ 34.652362] ath: EEPROM indicates default country code should be used
[ 34.652365] ath: doing EEPROM country→regdmn map search
[ 34.652378] ath: country maps to regdmn code: 0x3a
[ 34.652383] ath: Country alpha2 being used: US
[ 34.652386] ath: Regpair used: 0x3a
[ 34.669837] ieee80211 phy1: Selected rate control algorithm ‘minstrel_ht’ [ 34.671315] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=12 50893 seconds later: [50893.910674] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50893.961879] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.015322] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.064267] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.115474] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.166670] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.217864] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.269072] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.320275] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.371474] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.422686] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.473885] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.525096] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.576362] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.627495] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.678696] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.732123] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.781096] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.834596] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.883493] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.934705] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.985904] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
...repeats...
[50896.978515] ath10k_pci 0000:00:00.0: wmi command 36954 timeout, restarting hardware
[50896.986336] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50897.033922] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
...repeats...
[50900.018475] ath10k_pci 0000:00:00.0: wmi command 40859 timeout, restarting hardware
[50900.026455] ath10k_pci 0000:00:00.0: failed to send wmi nop: -11
[50900.032989] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request: -143
[50900.048476] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 87385a00 vdev: 0 addr: 50:f5:da:36:35:2c
[50900.059639] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 85914a00 vdev: 0 addr: ac:bc:32:b4:c4:d7
[50900.070766] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 86c43400 vdev: 1 addr: 32:b5:c2:96:62:fd
[50900.081883] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 86e1f000 vdev: 0 addr: 30:b5:c2:96:62:fd
[50900.093145] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50900.355684] ieee80211 phy0: Hardware restart was requested
[50900.361749] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 1: -143
[50900.369442] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 1: -143
[50901.941908] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[50901.959432] ath10k_pci 0000:00:00.0: wmi print ‘P 128 V 8 T 410’ [50901.965928] ath10k_pci 0000:00:00.0: wmi print ‘msdu-desc: 1424 sw-crypt: 0 ct-sta: 0’ [50901.974101] ath10k_pci 0000:00:00.0: wmi print ‘alloc rem: 24680 iram: 26872’ [50902.043511] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[50902.058893] ath10k_pci 0000:00:00.0: set-coverage-class, phyclk: 88 value: 0
[50902.079716] ath10k_pci 0000:00:00.0: device successfully recovered
[50902.086147] ath10k_pci 0000:00:00.0: Invalid state: 3 in ath10k_htt_tx_32, warning will not be repeated.
[50902.086152] ————[ cut here ]———— [50902.086232] WARNING: CPU: 0 PID: 4533 at /home/vagrant/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/ath10k-ct-2019-03-25-2e917efb/ath10k-4.19/htt_tx.c:1253 ath10k_convert_hw_rate_to_rate_info+0×190/0xae4 [ath10k_core]
[50902.086235] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TRACE xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ECN ip6table_raw ip_tables crc_ccitt compat sch_cake nf_conntrack
[50902.086394] sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb tun ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[50902.086515] CPU: 0 PID: 4533 Comm: kworker/0:1 Not tainted 4.14.109 #0
[50902.086640] Workqueue: events_freezable ieee80211_alloc_hw_nm [mac80211]
[50902.086644] Stack : 00000009 000004e5 87d58468 800b2878 804aeb00 87c07cb4 85da4ddc 80501947
[50902.086665] 804aac3c 87c07c8c 80500000 800b36d4 87d58468 00000000 87c07c68 dabdb416
[50902.086684] 00000000 00000000 00000000 00000000 00000004 8040f32c 00000001 68775f6e
[50902.086702] 735f6672 80500000 000001be 65657a61 00000000 00000000 87154274 87124968
[50902.086721] 00000009 000004e5 87d58468 8723cbf0 00000000 00000000 00000000 80650000
[50902.086739] ...
[50902.086745] Call Trace:
[50902.086767] [<8006a90c>] show_stack+0×58/0×100 [50902.086791] [<80084fa0>]
warn+0xe4/0×118 [50902.086802] [<80085064>] warn_slowpath_null+0x1c/0×28 [50902.086866] [<87124968>] ath10k_convert_hw_rate_to_rate_info+0×190/0xae4 [ath10k_core]
[50902.086896] [<87103d04>] 0x87103d04
[50902.086913] —[ end trace db720eb818c982c2 ]— [50902.086925] ath10k_pci 0000:00:00.0: failed to transmit packet, dropping: -19
[50902.086938] ath10k_pci 0000:00:00.0: failed to submit frame: -19
[50902.086945] ath10k_pci 0000:00:00.0: failed to push frame: -19
[50902.086967] ath10k_pci 0000:00:00.0: failed to transmit packet, dropping: -19
[50902.086977] ath10k_pci 0000:00:00.0: failed to submit frame: -19
[50902.086984] ath10k_pci 0000:00:00.0: failed to push frame: -19
[50902.097084] ath10k_pci 0000:00:00.0: failed to transmit packet, dropping: -19
...repeats...
[55789.947757] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55789.998968] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
55792.860153] ath10k_pci 0000:00:00.0: wmi command 36893 timeout, restarting hardware
[55792.867970] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55792.875741] ath10k_pci 0000:00:00.0: failed to delete peer b0:19:c6:64:f9:69 for vdev 0: -11
[55792.884453] ath10k_pci 0000:00:00.0: found sta peer b0:19:c6:64:f9:69 (ptr 86e1f600 id 33) entry on vdev 0 after it was supposedly removed
[55792.897563] ————[ cut here ]———— [55792.902662] WARNING: CPU: 0 PID: 2420 at backports-4.19.23-1/net/mac80211/sta_info.c:1004 sta_set_sinfo+0xbac/0xc58 [mac80211]
[55792.914415] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TRACE xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ECN ip6table_raw ip_tables crc_ccitt compat sch_cake nf_conntrack
[55792.986359] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55792.986485] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55793.003634] sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb tun ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[55793.062374] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55793.070938] CPU: 0 PID: 2420 Comm: hostapd Tainted: G W 4.14.109 #0
[55793.078506] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55793.086883] Stack : 80520000 804d84a4 00000000 00000000 804aeb00 85da1b04 87dd02dc 80501947
[55793.095767] 804aacd0 00000974 80653670 000003ec 85da1cb4 00000001 85da1ab8 b78f71e9
[55793.104653] 00000000 00000000 80650000 00012a38 00000000 00000000 00000008 00000000
[55793.114085] 000002ce 861a1102 000002cc 00000000 80000000 00000000 87064a04 87007c2c
[55793.123006] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55793.131158] 00000009 000003ec 85da1cb4 87ff8800 00000002 802697c4 00000000 80650000
[55793.139658] ...
[55793.142953] Call Trace:
[55793.145468] [<8006a90c>] show_stack+0×58/0×100 [55793.149997] [<80084fa0>] warn+0xe4/0×118 [55793.154512] [<80085064>] warn_slowpath_null+0x1c/0×28 [55793.160292] [<87007c2c>] sta_set_sinfo+0xbac/0xc58 [mac80211]
[55793.166181] [<87007db8>] sta_info_destroy_addr_bss+0×38/0×60 [mac80211]
[55793.173452] [<8778f17c>] cfg80211_check_station_change+0x1be0/0x2c54 [cfg80211]
[55793.180959] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55793.188700] —[ end trace db720eb818c982c3 ]— [55793.224635] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55793.275831] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
...
[55796.220118] ath10k_pci 0000:00:00.0: wmi command 36954 timeout, restarting hardware
[55796.245481] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55796.296663] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55796.317807] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 8561b600 vdev: 0 addr: 50:f5:da:36:35:2c
[55796.328987] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 85322c00 vdev: 0 addr: ac:bc:32:b4:c4:d7
[55796.340121] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 834fb200 vdev: 1 addr: 32:b5:c2:96:62:fd
[55796.351253] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 834fb000 vdev: 0 addr: 30:b5:c2:96:62:fd
[55796.860635] irq 15: nobody cared (try booting with the “irqpoll” option)
[55796.867447] CPU: 0 PID: 15620 Comm: kworker/u2:0 Tainted: G W 4.14.109 #0
[55796.875540] Workqueue: ath10k_wq ath10k_core_create [ath10k_core]
[55796.881718] Stack : ffffffff 00000003 80653ae0 800b2878 804aeb00 87c07cc4 86e123dc 80501947
[55796.890201] 804aac3c 87c07c9c 80500000 800b36d4 80653ae0 00000000 87c07c78 86c8eb6e
[55796.898683] 00000000 00000000 00000000 000151c0 00000000 00000000 00000008 00000000
[55796.907167] 00000323 80500000 00000322 00000000 00000000 8050b6a4 0000000f 00011000
[55796.915650] ffffffff 00000003 80653ae0 80506ae8 00000000 802697c4 00000000 80650000
[55796.924134] ...
[55796.926615] Call Trace:
[55796.929112] [<8006a90c>] show_stack+0×58/0×100 [55796.933620] [<800b6f6c>]
report_bad_irq.isra.0+0×54/0xf0
[55796.939179] [<800b72f4>] note_interrupt+0×284/0×330 [55796.944142] [<800b488c>] handle_irq_event_percpu+0x4c/0×64 [55796.949706] [<800b48e0>] handle_irq_event+0x3c/0x6c
[55796.954650] [<800b7ca4>] handle_level_irq+0×110/0×154 [55796.959772] [<800b3d90>] generic_handle_irq+0×38/0×50 [55796.964903] [<802d4750>] ar724x_pci_irq_handler+0xa4/0xdc
[55796.970376] [<800b3d90>] generic_handle_irq+0×38/0×50 [55796.975502] [<80219354>] ath79_intc_irq_handler+0×94/0xec
[55796.980981] [<800b3d90>] generic_handle_irq+0×38/0×50 [55796.986117] [<804144d4>] do_IRQ+0x1c/0x2c
[55796.990185] [<80219260>] plat_irq_dispatch+0xc0/0×120 [55796.995306] [<800658d8>] handle_int+0×138/0×144 [55796.999900] [<80219260>] plat_irq_dispatch+0xc0/0×120 [55797.005018] handlers:
[55797.007333] [<877134a0>] ath10k_pci_irq_msi_fw_mask [ath10k_pci]
[55797.013420] Disabling IRQ #15
[55797.285000] ieee80211 phy0: Hardware restart was requested
[55800.300248] ath10k_pci 0000:00:00.0: bss channel survey timed out
[55801.740207] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[55801.850097] ath10k_pci 0000:00:00.0: wmi print ‘P 128 V 8 T 410’ [55801.856213] ath10k_pci 0000:00:00.0: wmi print ‘msdu-desc: 1424 sw-crypt: 0 ct-sta: 0’ [55801.864353] ath10k_pci 0000:00:00.0: wmi print ‘alloc rem: 24680 iram: 26872’ [55802.950176] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[55808.120391] ath10k_pci 0000:00:00.0: device successfully recovered
[55808.126726] net_ratelimit: 79 callbacks suppressed
[55808.126736] ath10k_pci 0000:00:00.0: failed to transmit packet, dropping: -19
[55808.126748] ath10k_pci 0000:00:00.0: failed to submit frame: -19
[55808.126756] ath10k_pci 0000:00:00.0: failed to push frame: -19
[55808.126771] ath10k_pci 0000:00:00.0: failed to transmit packet, dropping: -19
[55808.126780] ath10k_pci 0000:00:00.0: failed to submit frame: -19
[55808.126787] ath10k_pci 0000:00:00.0: failed to push frame: -19
[55808.560031] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55808.567607] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55808.575152] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55808.670084] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55808.677616] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55808.790161] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55808.797700] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55808.890070] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55808.897614] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.000079] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.007588] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.110035] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.117559] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.125363] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.220094] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.227789] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.330097] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.337638] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.440112] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.447645] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.550389] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.557931] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.660388] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon


Showing tasks 101 - 150 of 1150 Page 3 of 23 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing