OpenWrt/LEDE Project

Welcome to the OpenWrt Project bug reporting and issue tracking system

Problems to be reported here are for the current OpenWrt and legacy LEDE Project’s targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to openwrt-bugs@infradead.org.

OpenedIDCategory  ascTask TypePrioritySeveritySummaryReported InStatus
24.08.2017978Base systemBug ReportVery LowLownetifd: support smaller ipv6 segments than /64TrunkUnconfirmed Task Description

netifd makes the assumption that ipv6 segments will never be any smaller than a /64; it quite often computes things like (1 « (64 - prefix→length)) which obviously won’t work out very well when prefix→length > 64. (Incidentally, it looks like it’s never been tested with prefixes larger than a /32, too, since things like “int32_t current = 0, asize = (1 « (64 - assign→length)) - 1;” will also not work out very well when assign→length ⇐ 32.)

The Linux network stack itself is more than happy to operate with these smaller segments, and odhcpd happily hands out leases. I know SLAAC won’t work on these segments, but that’s no reason to keep netifd from believing in them, IMHO. As it stands, I have several interfaces configured that the ubus-centric tools refuse to believe are set up!

25.08.2017980Base systemBug ReportVery LowLowImage Builder trx issue a "WARNING: maxlen exceeds defa...TrunkUnconfirmed Task Description

Hi all!

Downloaded Image Builder lede-imagebuilder-17.01.2-brcm47xx-legacy.Linux-x86_64 and when running it with the following command line:

make image PROFILE="linksys-wrt54gs" 

I get the following error message from “mjn3’s trx replacement - v0.81.1“, several time, every time an image is prepared

WARNING: maxlen exceeds default maximum!  Beware of overwriting nvram!

Here is the listing of the bin/targets/brcm47xx/legacy directory showing that no image exceed the 7,5 MB limit that seems to be hard coded in the trx.c utility source code.

-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:30 lede-17.01.2-brcm47xx-legacy-asus-wl-300g-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:30 lede-17.01.2-brcm47xx-legacy-asus-wl-320gp-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:30 lede-17.01.2-brcm47xx-legacy-asus-wl-330ge-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:30 lede-17.01.2-brcm47xx-legacy-asus-wl-500gp-v1-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:31 lede-17.01.2-brcm47xx-legacy-asus-wl-500gp-v2-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:31 lede-17.01.2-brcm47xx-legacy-asus-wl-500w-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:31 lede-17.01.2-brcm47xx-legacy-asus-wl-520gu-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:31 lede-17.01.2-brcm47xx-legacy-asus-wl-550ge-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:31 lede-17.01.2-brcm47xx-legacy-asus-wl-hdd25-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu    1869 Aug 25 15:34 lede-17.01.2-brcm47xx-legacy-device-linksys-wrt54gs.manifest
-rw-rw-r-- 1 xubuntu xubuntu 3543065 Aug 25 15:31 lede-17.01.2-brcm47xx-legacy-dlink-dwl-3150-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543052 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-edimax-ps1208-mfg-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 4001892 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-huawei-e970-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt150n-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt160n-v1-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt300n-v1-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt300n-v1-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54g3g-em-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54g3g-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54g3gv2-vf-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54g3gv2-vf-squashfs.noheader.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54g-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54gs-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54gs-v4-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrtsl54gs-squashfs.bin
-rw-r--r-- 1 xubuntu xubuntu 3543048 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-motorola-wa840g-squashfs.bin
-rw-r--r-- 1 xubuntu xubuntu 3543048 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-motorola-we800g-squashfs.bin
-rw-r--r-- 1 xubuntu xubuntu 3543048 Aug 25 15:33 lede-17.01.2-brcm47xx-legacy-motorola-wr850g-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543098 Aug 25 15:33 lede-17.01.2-brcm47xx-legacy-netgear-wgr614-v8-squashfs.chk
-rw-rw-r-- 1 xubuntu xubuntu 3674112 Aug 25 15:33 lede-17.01.2-brcm47xx-legacy-netgear-wgt634u-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543098 Aug 25 15:34 lede-17.01.2-brcm47xx-legacy-netgear-wndr3300-v1-squashfs.chk
-rw-rw-r-- 1 xubuntu xubuntu 3543098 Aug 25 15:34 lede-17.01.2-brcm47xx-legacy-netgear-wnr834b-v2-squashfs.chk
-rw-rw-r-- 1 xubuntu xubuntu 4001792 Aug 25 15:34 lede-17.01.2-brcm47xx-legacy-standard-noloader-gz-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:34 lede-17.01.2-brcm47xx-legacy-standard-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543068 Aug 25 15:34 lede-17.01.2-brcm47xx-legacy-usrobotics-usr5461-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu    4375 Aug 25 15:34 sha256sums

Thanx for your support.

Paolo

27.08.2017985Base systemBug ReportVery LowLowDIR-320 B1 dont save it's settings after power offTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on DIR-320 B1 (NRU)
- Software versions of LEDE release, packages, etc. 17.01.2
- Steps to reproduce

 Just Install LEDE 17.01.2 configure it. And get electrical plug off. Plug in and device settings are default.
27.08.2017986Base systemBug ReportVery LowLowARV752DPW missing default switch configTrunkUnconfirmed Task Description

Hi

On the ARV752DPW, with LEDE SNAPSHOT, r4723-4fce22e, and u-boot as linked to in the OpenWRT Wiki [http://www.galax.is/files/802/flash-uboot.bin] luci gives the warning message “Switch has unknown structure”.
The structure should be WAN, 1, 2, 3, 4, CPU.]

Also, swconfig shows that any configuration in (etc(config/network will be loaded on top of a default configuration that already exists at boot time. The switch does not appear to be properly initialized. Is this still supposed to happen in u-boot or should LEDE do this now?

e.g. /etc/config/network with:

...
config switch                                                        
        option name 'switch0'                                        
        option reset '1'                                             
        option enable_vlan '1'                                       
                                                                     
config switch_vlan                
        option device 'switch0'   
        option vlan '1'           
        option ports '1 2 3 4 5t' 
                                  
config switch_vlan                
        option device 'switch0'  
        option vlan '2'          
        option ports '0 5t'      
...

leads to this after reboot:


VLAN 0:
	vid: 0
	ports: 0 5t 
VLAN 1:
	vid: 1
	ports: 1 2 3 4 5t 
VLAN 2:
	vid: 2
	ports: 0 5t 
VLAN 3:
	vid: 3
	ports: 3 5t 
VLAN 4:
	vid: 4
	ports: 4 5t 
VLAN 5:
	vid: 5
	ports: 0 1 2 3 4 
 
28.08.2017990Base systemBug ReportVery LowLowopenvpn-openssl does not build without deprecated OpenS...TrunkUnconfirmed Task Description

With LEDE HEAD (4b3ffecf2bbbfb8df618314e5bec52659b648fac) and no CONFIG_OPENSSL_WITH_DEPRECATED, I get

ccache_cc -DHAVE_CONFIG_H -I. -I../.. -I../../include  -I../../include -I../../src/compat -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-
mips_24kc_gcc-5.4.0_musl/include/fortify -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include   -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/include   -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/include -DPLUGIN_LIBDIR=\"/usr/lib/openvpn/plugins\"  -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller
-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/tank/openwrt/scratch/builder-usbnetgw/build_dir/target-mips_24kc_musl/openvpn-openssl/openvpn-2.4.3:openvpn-2.4.3 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections  -std=c99 -MT crypto_openssl.o -MD -MP
-MF .deps/crypto_openssl.Tpo -c -o crypto_openssl.o crypto_openssl.c
In file included from syshead.h:182:0,
                 from crypto_openssl.c:35:
/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/sys/poll.h:1:2: warning: #warning redirecting incorrect #include <sys/poll.h> to <poll.h> [-Wcpp]
 #warning redirecting incorrect #include <sys/poll.h> to <poll.h>
  ^
In file included from crypto_openssl.c:44:0:
openssl_compat.h: In function 'RSA_set_flags':
openssl_compat.h:326:12: error: dereferencing pointer to incomplete type 'RSA {aka struct rsa_st}'
         rsa->flags = flags;
            ^
openssl_compat.h: In function 'RSA_get0_key':
openssl_compat.h:346:23: error: dereferencing pointer to incomplete type 'RSA {aka const struct rsa_st}'
         *n = rsa ? rsa->n : NULL;
                       ^
openssl_compat.h: In function 'RSA_set0_key':
openssl_compat.h:380:9: warning: implicit declaration of function 'BN_free' [-Wimplicit-function-declaration]
         BN_free(rsa->n);
         ^
openssl_compat.h: In function 'RSA_bits':
openssl_compat.h:410:16: warning: implicit declaration of function 'BN_num_bits' [-Wimplicit-function-declaration]
     return n ? BN_num_bits(n) : 0;
                ^
openssl_compat.h: In function 'DSA_get0_pqg':
openssl_compat.h:429:23: error: dereferencing pointer to incomplete type 'DSA {aka const struct dsa_st}'
         *p = dsa ? dsa->p : NULL;
                       ^
In file included from crypto_openssl.c:40:0:
openssl_compat.h: In function 'RSA_meth_new':
openssl_compat.h:470:31: error: invalid application of 'sizeof' to incomplete type 'RSA_METHOD {aka struct rsa_meth_st}'
     ALLOC_OBJ_CLEAR(rsa_meth, RSA_METHOD);
                               ^
buffer.h:1014:61: note: in definition of macro 'ALLOC_OBJ'
         check_malloc_return((dptr) = (type *) malloc(sizeof(type))); \
                                                             ^
openssl_compat.h:470:5: note: in expansion of macro 'ALLOC_OBJ_CLEAR'
     ALLOC_OBJ_CLEAR(rsa_meth, RSA_METHOD);
     ^
openssl_compat.h:470:31: error: invalid application of 'sizeof' to incomplete type 'RSA_METHOD {aka struct rsa_meth_st}'
     ALLOC_OBJ_CLEAR(rsa_meth, RSA_METHOD);
                               ^
buffer.h:1020:34: note: in definition of macro 'ALLOC_OBJ_CLEAR'
         memset((dptr), 0, sizeof(type)); \
                                  ^
In file included from crypto_openssl.c:44:0:
openssl_compat.h:471:13: error: dereferencing pointer to incomplete type 'RSA_METHOD {aka struct rsa_meth_st}'
     rsa_meth->name = string_alloc(name, NULL);
             ^
Makefile:672: recipe for target 'crypto_openssl.o' failed
make[7]: *** [crypto_openssl.o] Error 1

This looks to be due to incomplete backports of openssl1.1 changes into 1.0.2l (or earlier 1.0 releases, I’m not sure). In particular, many of these pieces of code are guarded by #ifdef HAVE_... tests which are currently evaluating to false. For example,
HAVE_DSA_GET0_PQG is unset because

<code>
configure:16116: checking for DSA_get0_pqg
configure:16116: ccache_cc -o conftest -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/tank/openwrt/scratch/builder-usbnetgw/build_dir/target-mips_24kc_musl/openvpn-openssl/openvpn-2.4.3:openvpn-2.4.3 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -std=c99 -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -L/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/lib -L/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/lib -L/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/lib -L/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/lib -znow -zrelro -Wl,–gc-sections conftest.c -L/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/lib -lcrypto -lssl >&5
/tmp/cczFWI5b.o: In function `main’:
conftest.c:(.text.startup.main+0×2): undefined reference to `DSA_get0_pqg’ <code>

02.09.2017996Base systemBug ReportVery LowMediumAt boot /etc/hotplug scripts are not triggered by kerne...AllUnconfirmed Task Description

At boot /etc/hotplug.d scripts are not triggered by kernel events.
If we have a HDD/usb printer atached to an usb port, at boot, those scripts are not executed. However when we add/remove it later, after boot those scripts are executed properly.

Same problem as here:

https://dev.openwrt.org/ticket/18116

I am using this hotplug script:

https://www.all4os.com/router/add-multiple-usb-printers-to-openwrt-firmware-router-via-p910nd-using-hotplug.html

11.09.20171005Base systemFeature RequestVery LowLowsysupgrade should stop network serviceTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of LEDE release, packages, etc.
- Steps to reproduce

 

Applicable to all devices using the generic sysupgrade.

Seen on LEDE head.

To reproduce:

scp over a new .img file

upgrade it as “sysupgrade -v xyzzy.img”

While that’s running, you’ll be able to ping the router, but if you do an http connection to it, it will be reset.

What would be simpler would be doing a “/etc/init.d/network stop” just after killing off all services (including web servers).

This would make it easier to add scripting which auto-detects when the upgrade has completed by reconnecting after a reasonable wait (and retrying as necessary).

11.09.20171006Base systemFeature RequestVery LowLowStart syslog service(s) before network comes upTrunkUnconfirmed Task Description

Not platform specific.

Seen on LEDE head.

There doesn’t seem to be a reason why syslog service can’t be brought up earlier, such as START=12.

Since it typically runs on an unbound socket, adding or deleting interfaces should have no effect.

This would also allow any configuration (network and otherwise) scripts encountering errors to log them.

13.09.20171008Base systemBug ReportVery LowLowTeach procd about mounpoint or path dependenciesTrunkUnconfirmed Task Description

So far as I have been able to discern, there is no mechanism for blocking a service’s start until a particular filesystem has been mounted (or directory exists). The motivation is that I run collectd (via luci-statistics, natch) on my router and persist the data sets (rrds) across reboot by having them written to a USB stick. However, early in boot, collectd sometimes (often? always?) manages to come up before the mount completes, and so touches the on-router flash, creating its basedir and datadir and the rrds and so on.

27.09.20171020Base systemBug ReportVery LowMediumMikrotik RB493G AR8316 switch0/ETH0 cannot be managed AllUnconfirmed Task Description

Exists on OpenWRT 14 and 15, LEDE 17 and Trunk

The behaviour is identical to issues reported on RB951G and RB2011 models.

See historical details:
https://github.com/openwrt/openwrt/issues/352 https://lists.openwrt.org/pipermail/openwrt-devel/2014-December/030216.html

I have been able to work around the issue by cross-connecting the PoE/WAN port to switch0 LAN4 and turning off eth0 CPU. This allows me to use all remaining ports. It’s a horrible kludge, I’m only mentioning it as a temporary workaround.

05.10.20171040Base systemBug ReportVery LowLowCan't set WiFi HT mode per-SSIDTrunkUnconfirmed Task Description

WZR-600DHP with OpenWrt (Attitude Adjustment) allowed me to set htmode per-SSID. Furthermore, this seems to have worked, since my Nexus 5X (which doesn’t work with HT40 on any channel other than 3) connected to my HT20 SSID, but failed to connect to my HT40 SSID.

LEDE (Reboot / 17.01.2) seems to have moved htmode to a radio-specific option instead, so I have lost this functionality.

09.10.20171052Base systemBug ReportVery LowLowdnsmasq hotplug script does not work inside ujailTrunkUnconfirmed Task Description

Testing b73986a8264016883a8a7d666687a340cb810934 on ipq806x (C2600, specifically), using dnsmasq inside ujail fails to run hotplug events because /lib/functions.sh is unavailable inside the jail:

Mon Oct 9 20:13:53 2017 daemon.debug dnsmasq-script[1]: /sbin/hotplug-call: .: line 6: can’t open ‘/lib/functions.sh’ Mon Oct 9 20:13:53 2017 daemon.warn dnsmasq[1]: script process exited with status 2

Unfortunately, the fix is not as simple as adding /lib/functions.sh to the jail mount, as that results in the uninformative

Mon Oct 9 20:15:35 2017 daemon.warn dnsmasq[1]: script process exited with status 1

Suggestions?

16.10.20171064Base systemBug ReportVery LowLowWXR-1900DHP Problems with 17.01.2 and 17.01.3 (BCM53xx)TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
Buffalo WXR-1900DHP

- Software versions of LEDE release, packages, etc.
Stable Release 17.01.2 and 17.01.3 both partially functional. (17.01.01 works well, except wifi)
lede-17.01.2-bcm53xx-buffalo-wxr-1900dhp-squashfs.trx
lede-17.01.3-bcm53xx-buffalo-wxr-1900dhp-squashfs.trx

- Steps to reproduce
1. Flash lede-17.01.1-bcm53xx-buffalo-wxr-1900dhp-squashfs.trx
2. Observe working - luci stats on overview page, PPPoE sucessful connection
3. Flash lede-17.01.2-bcm53xx-buffalo-wxr-1900dhp-squashfs.trx via luci (uncheck preserve settings)
4. Observe issues - luci no stats for memory etc, PPPoE fails to connect after setup.

Please let me know what other information or further testing would be useful.

16.10.20171067Base systemBug ReportVery LowLowmisleading output from busybox nslookup applet (lede va...TrunkUnconfirmed Task Description

LEDE_BOARD=”bcm53xx/generic” LEDE_ARCH=”arm_cortex-a9” LEDE_TAINTS=”no-all busybox” LEDE_RELEASE=”LEDE Reboot SNAPSHOT r5032-9e9696a”

Description: where no query type is provided to nslookup busybox applet, nslookup assumes A + AAAA queries (if the domain argument cannot be converted into a ptr). Then, if the A query succeeds but AAAA fails (for example, no record for an IPv6 address for the given hostname), nslookup returns “Can’t find hostname: No answer”. The “no answer” response looks puzzling. One has to review the the nslookup applet’s source code to understand that there is nothing wrong with the DNS server.

For example:

root@LEDE:~# nslookup cam1 localhost
Server:		localhost
Address:	::1#53

Name:      cam1
Address 1: 192.168.21.14
*** Can't find cam1: No answer

Suggested fix: either add type information in the response, like “type A: X.X.X.X, type AAAA: can’t find hostname: no answer”, or omit the AAAA response if only A record is found.

17.10.20171071Base systemBug ReportVery LowLowSysupgrade fails when kernel console is disabledTrunkUnconfirmed Task Description

Hardware used:
- Gateworks Ventana imx6 board (GW5200)

Synopsis:

Running sysupgrade with a valid image fails if the kernel console is disabled in u-boot (setenv console ; saveenv; reset)
As soon as sysupgrade starts, the board reboots immediately.

The detected reboot reason displayed is exactly the same in both cases.

Reset cause: WDOG
WDOG1 Reset cause: SFTW
WDOG2 Reset cause: POR

Basically:
- Kernel console enabled (console = ttymxc1) –> sysupgrade runs normally and succeeds
- Kernel console disabled (console = ) –> The board reboots within 1 second as soon as sysupgrade starts

Rationale for disabling kernel console:

- This board exposes 2 UART ports for user applications (ttymxc0, ttymxc1)
- ttymxc1 is shared with the kernel console and needs to be disabled so it does not interfere with the peripheral communication
- Both ports are used in my case (ttymxc0: GPS received ; ttymxc1: Iridium modem)

18.10.20171074Base systemBug ReportVery LowCriticalNETDEV WATCHDOG: wlan2 (mwifiex_sdio): transmit queue 1...TrunkUnconfirmed Task Description

- Device problem occurs on: WRT3200ACM
- Software versions of LEDE release, packages, etc.: LEDE Reboot SNAPSHOT r5096-a29848c / LuCI Master (git-17.260.43176-678c15c)
- Steps to reproduce: I’ve been consistently having problems with wlan2 going offline after the router has been up for a day or so, but just stumbled across this in dmesg. I’ll see if I can figure out the circumstances leading to it.

 

[85338.316517] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x1b4/0×234 [85338.324820] NETDEV WATCHDOG: wlan2 (mwifiex_sdio): transmit queue 1 timed out
[85338.331987] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CLASSIFY slhc rfcomm nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack mwifiex_sdio mwifiex iptable_mangle iptable_filter ipt_ECN ip_tables hidp hci_uart crc_ccitt btusb btmrvl_sdio btmrvl btintel bnep bluetooth hid evdev input_core mwlwifi mac80211 cfg80211 compat xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport
[85338.404541] ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables tun regmap_mmio ecb cmac uhci_hcd ohci_platform ohci_hcd gpio_button_hotplug
[85338.442106] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.9.54 #0
[85338.448049] Hardware name: Marvell Armada 380/385 (Device Tree)
[85338.454003] [<c0016010>] (unwind_backtrace) from [<c0012220>] (show_stack+0×10/0×14)
[85338.461782] [<c0012220>] (show_stack) from [<c020c1a0>] (dump_stack+0x7c/0x9c)
[85338.469036] [<c020c1a0>] (dump_stack) from [<c0029218>] (warn+0xbc/0xec)
[85338.475939] [<c0029218>] (
warn) from [<c002927c>] (warn_slowpath_fmt+0×34/0×44)
[85338.483455] [<c002927c>] (warn_slowpath_fmt) from [<c03b6c38>] (dev_watchdog+0x1b4/0×234)
[85338.491661] [<c03b6c38>] (dev_watchdog) from [<c006ffe8>] (call_timer_fn+0×20/0×94)
[85338.499349] [<c006ffe8>] (call_timer_fn) from [<c0070220>] (run_timer_softirq+0x1c4/0×200)
[85338.507650] [<c0070220>] (run_timer_softirq) from [<c002d2b4>] (do_softirq+0xd0/0×204)
[85338.515775] [<c002d2b4>] (
do_softirq) from [<c002d66c>] (irq_exit+0×94/0xb8)
[85338.523029] [<c002d66c>] (irq_exit) from [<c0061e04>] (handle_domain_irq+0×90/0xb4)
[85338.530892] [<c0061e04>] (
handle_domain_irq) from [<c0009428>] (gic_handle_irq+0×50/0×94)
[85338.539277] [<c0009428>] (gic_handle_irq) from [<c0012c8c>] (irq_svc+0x6c/0×90)
[85338.546789] Exception stack(0xdf475f90 to 0xdf475fd8)
[85338.551860] 5f80: 00000001 00000000 00000000 c001b1c0
[85338.560071] 5fa0: 00000000 df474000 c0604fe4 00000002 c05ff168 00000000 df475fe8 00000001
[85338.568282] 5fc0: 00000000 df475fe0 c000f808 c000f80c 60000013 ffffffff
[85338.574925] [<c0012c8c>] (
irq_svc) from [<c000f80c>] (arch_cpu_idle+0x2c/0×38)
[85338.582355] [<c000f80c>] (arch_cpu_idle) from [<c005b154>] (cpu_startup_entry+0xf0/0x19c)
[85338.590567] [<c005b154>] (cpu_startup_entry) from [<000095ac>] (0x95ac)
[85338.597214] —[ end trace 7ee504210e2aead0 ]— [85338.601865] mwifiex_sdio mmc0:0001:1: 8504333 : Tx timeout(#1), bss_type-num = 1-0
[85344.871433] mwifiex_sdio mmc0:0001:1: 8504960 : Tx timeout(#2), bss_type-num = 1-0
[85350.631045] mwifiex_sdio mmc0:0001:1: 8505536 : Tx timeout(#3), bss_type-num = 1-0
[85356.400657] mwifiex_sdio mmc0:0001:1: 8506113 : Tx timeout(#4), bss_type-num = 1-0
[85366.309996] mwifiex_sdio mmc0:0001:1: 8507104 : Tx timeout(#5), bss_type-num = 1-0
[85376.309327] mwifiex_sdio mmc0:0001:1: 8508104 : Tx timeout(#6), bss_type-num = 1-0
[85386.318652] mwifiex_sdio mmc0:0001:1: 8509105 : Tx timeout(#7), bss_type-num = 1-0
[85386.326257] mwifiex_sdio mmc0:0001:1: tx_timeout_cnt exceeds threshold. Triggering card reset!
[85386.356950] mwifiex_sdio mmc0:0001:1: info: shutdown mwifiex...
[85386.362967] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.368924] mwifiex_sdio mmc0:0001:1: Failed to delete mgmt IEs!
[85386.374978] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.380928] mwifiex_sdio mmc0:0001:1: Failed to stop the BSS
[85386.387009] br-lan: port 4(wlan2) entered disabled state
[85386.394495] device wlan2 left promiscuous mode
[85386.398975] br-lan: port 4(wlan2) entered disabled state
[85386.404593] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.410562] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.416507] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.603147] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
[85386.610161] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[85396.707953] mwifiex_sdio mmc0:0001:1: mwifiex_cmd_timeout_func: Timeout cmd id = 0xa9, act = 0×0 [85396.716787] mwifiex_sdio mmc0:0001:1: num_data_h2c_failure = 0
[85396.722652] mwifiex_sdio mmc0:0001:1: num_cmd_h2c_failure = 0
[85396.728423] mwifiex_sdio mmc0:0001:1: is_cmd_timedout = 1
[85396.733842] mwifiex_sdio mmc0:0001:1: num_tx_timeout = 0
[85396.739178] mwifiex_sdio mmc0:0001:1: last_cmd_index = 3
[85396.744512] mwifiex_sdio mmc0:0001:1: last_cmd_id: b3 00 b3 00 b2 00 a9 00 b3 00
[85396.751940] mwifiex_sdio mmc0:0001:1: last_cmd_act: 00 00 00 00 00 00 00 00 00 00
[85396.759457] mwifiex_sdio mmc0:0001:1: last_cmd_resp_index = 2
[85396.765225] mwifiex_sdio mmc0:0001:1: last_cmd_resp_id: b3 80 b3 80 b2 80 b3 80 b3 80
[85396.773093] mwifiex_sdio mmc0:0001:1: last_event_index = 2
[85396.778603] mwifiex_sdio mmc0:0001:1: last_event: 37 00 55 00 43 00 55 00 55 00
[85396.785944] mwifiex_sdio mmc0:0001:1: data_sent=1 cmd_sent=1
[85396.791630] mwifiex_sdio mmc0:0001:1: ps_mode=0 ps_state=0
[85396.797372] mwifiex_sdio mmc0:0001:1: info: _mwifiex_fw_dpc: unregister device

21.10.20171094Base systemBug ReportVery LowCriticalno connection on any ethernet ports (incl internet) on ...TrunkUnconfirmed Task Description

Yesterday I upgraded the Linksys wrt1200ac from openwrt 15.05.1
to lede-17.01.4. The upgrade was done through a luci web
interface.

After reboot the wan connection was gone, as well as all local
ethernet ports. Wifi continued to work fine. The configuration
seems to have survived the upgrade. I couldn’t find anything
wrong with the configuration.

On the Internet port there were no packets coming in. On the
ethernet port 1 there are bootp/dhcp requests coming from the
router.

Not sure if that is relevant, but reverting back to 15.05.1
didn’t work either: the router is currently completely
inaccessible. I don’t have a serial cable, will probably order
one to try to debrick the thing.

23.10.20171105Base systemBug ReportVery LowLowtp-link wr840n v4 - wifi disabled when channel is set t...TrunkUnconfirmed Task Description

When I set the wifi channel to ‘auto’, on a tp-link wr840n v4, the wifi interface seems to get disabled.

I’m using “Reboot SNAPSHOT r5122-f7a6fd3”.

If I fix some channel (1 to 11), the wifi connection works normaly.

 


24.10.20171110Base systemBug ReportVery LowLowWifi unusable on HG556a using current trunkTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: Huawei ECHOLIFE HG556a Type B
- Software versions of LEDE release, packages, etc: Current Trunk - Powered by LuCI Master (git-17.294.24601-59a4e40) / LEDE Reboot SNAPSHOT r5122-f7a6fd3153

- Steps to reproduce: reboot

I did an update to trunk and made a lede build for the HG556a type B the other day. I have two of these HG556a type B routers both configured as wireless repeaters. I made no changes to the config, I simply wanted the latest security patches installed on my wifi repeaters. The first HG556a connects to a WWAN router that broadcasts 802.11n only, the other WWAN router broadcasts legacy wifi modes and 802.11n. The first works perfectly. The second throws up numerous errors in syslog from boot time, reboot every few hours and repeatedly disconnects from clients and the WWAN router. See syslog below:

Powered by LuCI Master (git-17.294.24601-59a4e40) / LEDE Reboot SNAPSHOT r5122-f7a6fd3153

Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.596484] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.604568] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.604568] 80543fac 00000000 00000004 81f73908 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.604568] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.604568] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.604568] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.604568] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.641077] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.643652] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.648182] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.653588] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.659056] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.665646] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.671458] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.676979] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.683219] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.690367]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.691843] —[ end trace 0902623f520cb0c7 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.698309] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.703376] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.715140] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19932.858376] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.866468] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.866468] 80543fac 00000000 00000004 81f76648 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.866468] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.866468] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.866468] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.866468] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.902968] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.905544] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.910072] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.915479] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.920933] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.927490] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.933304] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.938829] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.945064] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.952230]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.953769] —[ end trace 0902623f520cb0c8 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.958850] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.963902] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.975678] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19933.118913] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.126999] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.126999] 80543fac 00000000 00000004 81f76b18 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.126999] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.126999] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.126999] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.126999] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.163508] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.166083] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.170613] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.176018] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.181482] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.188060] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.193877] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.199401] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.205641] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.212796]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.214330] —[ end trace 0902623f520cb0c9 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.219582] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.224643] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.236421] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19933.379658] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.387752] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.387752] 80543fac 00000000 00000004 81e79bc8 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.387752] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.387752] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.387752] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.387752] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.424254] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.426828] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.431359] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.436764] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.442218] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.448774] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.454587] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.460111] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.466350] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.473507]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.474982] —[ end trace 0902623f520cb0ca ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.480524] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.485601] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.497400] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19933.640637] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.648719] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.648719] 80543fac 00000000 00000004 82f334e8 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.648719] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.648719] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.648719] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.648719] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.685231] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.687807] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.692346] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.697751] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.703222] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.709776] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.715590] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.721115] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.727354] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.734503]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.735978] —[ end trace 0902623f520cb0cb ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.741140] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.746190] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.757949] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19933.901184] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.909277] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.909277] 80543fac 00000000 00000004 82f822d8 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.909277] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.909277] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.909277] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.909277] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.945779] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.948307] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.952874] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.958280] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.963731] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.970280] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.976092] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.981608] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.987845] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.994995]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.996472] —[ end trace 0902623f520cb0cc ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.001802] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.006851] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.018628] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19934.161867] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.169949] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.169949] 80543fac 00000000 00000004 82f82a68 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.169949] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.169949] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.169949] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.169949] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.206460] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.208989] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.213559] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.218963] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.224427] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.230982] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.236793] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.242310] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.248546] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.255694]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.257173] —[ end trace 0902623f520cb0cd ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.263788] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.268875] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.280640] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19934.423875] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.431969] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.431969] 80543fac 00000000 00000004 82f85598 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.431969] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.431969] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.431969] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.431969] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.468470] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.471043] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.475571] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.480985] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.486443] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.492998] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.498812] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.504334] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.510574] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.517723]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.519198] —[ end trace 0902623f520cb0ce ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.524808] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.529872] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.541651] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19934.684889] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.692972] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.692972] 80543fac 00000000 00000004 832f2f38 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.692972] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.692972] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.692972] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.692972] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.729518] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.732012] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.736580] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.741986] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.747459] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.754014] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.759824] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.765340] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.771598] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.778745]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.780221] —[ end trace 0902623f520cb0cf ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.785086] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.790094] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.801851] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19934.945087] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.953182] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.953182] 80543fac 00000000 00000004 82face88 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.953182] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.953182] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.953182] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.953182] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.989682] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.992210] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.996777] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.002184] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.007645] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.014194] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.020006] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.025529] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.031769] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.038926]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.040402] —[ end trace 0902623f520cb0d0 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.045585] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.050620] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.062398] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19935.205636] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.213720] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.213720] 80543fac 00000000 00000004 82facbc8 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.213720] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.213720] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.213720] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.213720] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.250228] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.252758] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.257326] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.262734] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.268204] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.274764] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.280582] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.286105] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.292342] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.299491]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.300968] —[ end trace 0902623f520cb0d1 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.306459] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.311521] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.323280] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19935.466515] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.474607] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.474607] 80543fac 00000000 00000004 82e5fc78 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.474607] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.474607] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.474607] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.474607] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.511109] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.513687] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.518223] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.523627] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.529085] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.535639] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.541450] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.546964] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.553203] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.560352]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.561886] —[ end trace 0902623f520cb0d2 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.566864] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.571907] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.583683] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19935.726919] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.735002] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.735002] 80543fac 00000000 00000004 81cb0438 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.735002] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.735002] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.735002] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.735002] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.771513] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.774086] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.778616] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.784025] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.789498] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.796088] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.801901] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.807424] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.813664] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.820820]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.822353] —[ end trace 0902623f520cb0d3 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.827454] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.832505] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.844268] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19935.987502] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.995596] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.995596] 80543fac 00000000 00000004 82ea0388 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.995596] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.995596] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.995596] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.995596] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.032096] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.034672] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.039202] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.044605] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.050060] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.056609] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.062421] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.067946] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.074183] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.081379]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.082854] —[ end trace 0902623f520cb0d4 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.088001] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.093055] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.104833] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19936.248068] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.256152] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.256152] 80543fac 00000000 00000004 81f19178 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.256152] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.256152] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.256152] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.256152] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.292662] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.295236] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.299769] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.305173] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.310640] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.317193] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.323006] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.328528] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.334767] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.341917]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.343392] —[ end trace 0902623f520cb0d5 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.348255] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.353264] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.365024] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19936.508257] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.516351] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.516351] 80543fac 00000000 00000004 81f19388 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.516351] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.516351] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.516351] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.516351] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.552851] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.555426] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.559954] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.565385] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.570846] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.577439] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.583234] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.588753] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.594994] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.602141]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.603617] —[ end trace 0902623f520cb0d6 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.608659] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.613702] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.625478] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19936.768715] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.776800] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.776800] 80543fac 00000000 00000004 82ea09b8 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.776800] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.776800] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.776800] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.776800] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.813310] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.815844] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.820406] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.825814] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.831286] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.837839] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.843652] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.849166] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.855406] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.862554]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.864030] —[ end trace 0902623f520cb0d7 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.869073] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.874115] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.885876] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19937.029111] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.037203] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.037203] 80543fac 00000000 00000004 81f19908 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.037203] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.037203] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.037203] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.037203] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.073706] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.076235] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.080803] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.086208] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.091662] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.098218] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.104028] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.109546] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.115783] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.122932]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.124408] —[ end trace 0902623f520cb0d8 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.129917] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.134978] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.146753] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19937.289992] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.298075] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.298075] 80543fac 00000000 00000004 82e2f858 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.298075] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.298075] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.298075] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.298075] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.334586] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.337114] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.341682] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.347086] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.352552] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.359107] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.364916] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.370434] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.376670] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.383819]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.385297] —[ end trace 0902623f520cb0d9 ]— Tue Oct 24 13:08:04 2017 daemon.info odhcpd[914]: Using a RA lifetime of 0 seconds on br-lan
Tue Oct 24 13:08:04 2017 daemon.notice hostapd: nl80211: nl80211_recv_beacons→nl_recvmsgs failed: -5
Tue Oct 24 13:10:24 2017 daemon.info hostapd: wlan0-1: STA f0:25:b7:b2:fe:ea IEEE 802.11: authenticated
Tue Oct 24 13:10:24 2017 daemon.info hostapd: wlan0-1: STA f0:25:b7:b2:fe:ea IEEE 802.11: associated (aid 1)
Tue Oct 24 13:10:24 2017 daemon.notice hostapd: wlan0-1: AP-STA-CONNECTED f0:25:b7:b2:fe:ea
Tue Oct 24 13:10:24 2017 daemon.info hostapd: wlan0-1: STA f0:25:b7:b2:fe:ea RADIUS: starting accounting session 747735F6C298AD3B
Tue Oct 24 13:10:24 2017 daemon.info hostapd: wlan0-1: STA f0:25:b7:b2:fe:ea WPA: pairwise key handshake completed (RSN)
Tue Oct 24 13:10:24 2017 daemon.info dnsmasq-dhcp[2988]: DHCPDISCOVER(br-lan) f0:25:b7:b2:fe:ea

 


31.10.20171130Base systemBug ReportVery LowLowAdd partial import for settingsTrunkUnconfirmed Task Description

Sometimes it’s very necessary feature. For example after upgrade from OpenWRT to LEDE my router works fine with default settings. But after import my configuration, DNS and DHCP IPv4 not working at all. And it’s hard to determinite what settings responsible for this, because you can only import all or nothing. I suggest add dialog with checkboxes to import configuration process.

31.10.20171133Base systemBug ReportVery LowMediumCan't set channels 12 and 13 on Raspberry Pi 3 in AP co...AllUnconfirmed Task Description

It is not possible to set up channel 12/13 on Raspberry Pi 3 in Wifi AP configuration. I get error “brcmfmac: brcmf_cfg80211_start_ap: Set Channel failed: chspec=4109, -20”.
Tested on 17.01.1 and latest snapshot (r5217-098afa1).
PS Raspbian works properly on 13 channel as AP.

Logs:

root@LEDE:~# uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.htmode='HT20'
wireless.radio0.disabled='0'
wireless.radio0.country='PL'
wireless.radio0.channel='11'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='Dantooine'
wireless.default_radio0.encryption='psk2'
wireless.default_radio0.key='secret'

root@LEDE:~# wifi
[  828.291269] device wlan0 left promiscuous mode
[  828.301579] br-lan: port 2(wlan0) entered disabled state
[  830.594037] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  830.608333] br-lan: port 2(wlan0) entered blocking state
[  830.619697] br-lan: port 2(wlan0) entered disabled state
[  830.631336] device wlan0 entered promiscuous mode
[  830.911507] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  830.924197] br-lan: port 2(wlan0) entered blocking state
[  830.935606] br-lan: port 2(wlan0) entered forwarding state

root@LEDE:~# uci set wireless.radio0.channel=13
root@LEDE:~# uci commit wireless
root@LEDE:~# wifi
[  913.551274] device wlan0 left promiscuous mode
[  913.561751] br-lan: port 2(wlan0) entered disabled state
[  915.854693] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  915.869110] br-lan: port 2(wlan0) entered blocking state
[  915.880481] br-lan: port 2(wlan0) entered disabled state
[  915.892046] device wlan0 entered promiscuous mode
[  916.080443] brcmfmac: brcmf_cfg80211_start_ap: Set Channel failed: chspec=4109, -20
[  916.131249] device wlan0 left promiscuous mode
[  916.142014] br-lan: port 2(wlan0) entered disabled state
[  927.997654] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  928.012458] br-lan: port 2(wlan0) entered blocking state
[  928.024440] br-lan: port 2(wlan0) entered disabled state
[  928.036703] device wlan0 entered promiscuous mode
[  928.222287] brcmfmac: brcmf_cfg80211_start_ap: Set Channel failed: chspec=4109, -20
[  928.301237] device wlan0 left promiscuous mode
[  928.312608] br-lan: port 2(wlan0) entered disabled state

root@LEDE:~# uci set wireless.radio0.channel=11
root@LEDE:~# uci commit wireless
root@LEDE:~# wifi
[  990.032785] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  990.048153] br-lan: port 2(wlan0) entered blocking state
[  990.060246] br-lan: port 2(wlan0) entered disabled state
[  990.072619] device wlan0 entered promiscuous mode
[  990.351670] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  990.365070] br-lan: port 2(wlan0) entered blocking state
[  990.377132] br-lan: port 2(wlan0) entered forwarding state
[ 1000.491313] device wlan0 left promiscuous mode
[ 1000.502769] br-lan: port 2(wlan0) entered disabled state
[ 1002.676007] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1002.691453] br-lan: port 2(wlan0) entered blocking state
[ 1002.703651] br-lan: port 2(wlan0) entered disabled state
[ 1002.716135] device wlan0 entered promiscuous mode
[ 1003.093512] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1003.107183] br-lan: port 2(wlan0) entered blocking state
[ 1003.119522] br-lan: port 2(wlan0) entered forwarding state

root@LEDE:~# iw list
Wiphy phy0
	max # scan SSIDs: 10
	max scan IEs length: 2048 bytes
	max # sched scan SSIDs: 16
	max # match sets: 16
	max # scan plans: 1
	max scan plan interval: 508
	max scan plan iterations: 0
	Retry short limit: 7
	Retry long limit: 4
	Coverage class: 0 (up to 0m)
	Device supports T-DLS.
	Available Antennas: TX 0 RX 0
	Supported interface modes:
		 * IBSS
		 * managed
		 * AP
		 * P2P-client
		 * P2P-GO
		 * P2P-device
	Band 1:
		Capabilities: 0x1020
			HT20
			Static SM Power Save
			RX HT20 SGI
			No RX STBC
			Max AMSDU length: 3839 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 16 usec (0x07)
		HT TX/RX MCS rate indexes supported: 0-7
		Frequencies:
			* 2412 MHz [1] (20.0 dBm)
			* 2417 MHz [2] (20.0 dBm)
			* 2422 MHz [3] (20.0 dBm)
			* 2427 MHz [4] (20.0 dBm)
			* 2432 MHz [5] (20.0 dBm)
			* 2437 MHz [6] (20.0 dBm)
			* 2442 MHz [7] (20.0 dBm)
			* 2447 MHz [8] (20.0 dBm)
			* 2452 MHz [9] (20.0 dBm)
			* 2457 MHz [10] (20.0 dBm)
			* 2462 MHz [11] (20.0 dBm)
			* 2467 MHz [12] (20.0 dBm)
			* 2472 MHz [13] (20.0 dBm)****
			* 2484 MHz [14] (disabled)
	valid interface combinations:
		 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
		   total <= 3, #channels <= 1
		 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
		   total <= 4, #channels <= 1
03.11.20171143Base systemBug ReportVery LowMediummac80211 kernel dumpTrunkUnconfirmed Task Description

- Hardware:
BT Homehub 5 Type A

- Software:
LEDE Reboot (SNAPSHOT, r5217-098afa1)

- Packages:

# opkg list-installed | xargs
6rd - 9-3 ath10k-firmware-qca988x - 2017-03-29-956e2609-1 base-files - 176-r5217-098afa1 block-mount - 2017-07-31-8ab4fda6-1 br2684ctl - 2.5.2-5 bspatch - 4.3-1 busybox - 1.27.2-1 dnsmasq - 2.78-2 dropbear - 2017.75-4 dsl-vrx200-firmware-xdsl-a - 05.08.01.08.01.06_05.08.00.0B.01.01_osc-1 dsl-vrx200-firmware-xdsl-b-patch - 05.08.01.08.01.06_05.08.00.0B.01.01_osc-1 firewall - 2017-05-27-a4d98aea-1 fstools - 2017-07-31-8ab4fda6-1 fwtool - 1 hostapd-common - 2017-08-24-c2d4f2eb-4 ip6tables - 1.6.1-1 iptables - 1.6.1-1 iw - 4.9-1 jshn - 2017-09-29-632688e8-1 jsonfilter - 2016-07-02-dea067ad-1 kernel - 4.9.58-1-f4186ff9dee2227808b576b5989e829c kmod-ath - 4.9.58+2017-10-06-1 kmod-ath10k - 4.9.58+2017-10-06-1 kmod-ath9k - 4.9.58+2017-10-06-1 kmod-ath9k-common - 4.9.58+2017-10-06-1 kmod-atm - 4.9.58-1 kmod-cfg80211 - 4.9.58+2017-10-06-1 kmod-crypto-aead - 4.9.58-1 kmod-crypto-cmac - 4.9.58-1 kmod-crypto-crc32c - 4.9.58-1 kmod-crypto-hash - 4.9.58-1 kmod-crypto-manager - 4.9.58-1 kmod-crypto-null - 4.9.58-1 kmod-crypto-pcompress - 4.9.58-1 kmod-fs-ext4 - 4.9.58-1 kmod-fs-ntfs - 4.9.58-1 kmod-fs-vfat - 4.9.58-1 kmod-fuse - 4.9.58-1 kmod-gpio-button-hotplug - 4.9.58-2 kmod-ifb - 4.9.58-1 kmod-ip6tables - 4.9.58-1 kmod-ipt-conntrack - 4.9.58-1 kmod-ipt-conntrack-extra - 4.9.58-1 kmod-ipt-core - 4.9.58-1 kmod-ipt-ipopt - 4.9.58-1 kmod-ipt-ipset - 4.9.58-1 kmod-ipt-nat - 4.9.58-1 kmod-iptunnel - 4.9.58-1 kmod-iptunnel4 - 4.9.58-1 kmod-leds-gpio - 4.9.58-1 kmod-lib-crc-ccitt - 4.9.58-1 kmod-lib-crc16 - 4.9.58-1 kmod-ltq-atm-vr9 - 4.9.58-2 kmod-ltq-deu-vr9 - 4.9.58-1 kmod-ltq-ifxos - 4.9.58+1.5.19-2 kmod-ltq-ptm-vr9 - 4.9.58-1 kmod-ltq-vdsl-vr9 - 4.9.58+4.17.18.6-2 kmod-ltq-vdsl-vr9-mei - 4.9.58+1.5.17.6-3 kmod-mac80211 - 4.9.58+2017-10-06-1 kmod-nf-conntrack - 4.9.58-1 kmod-nf-conntrack6 - 4.9.58-1 kmod-nf-ipt - 4.9.58-1 kmod-nf-ipt6 - 4.9.58-1 kmod-nf-nat - 4.9.58-1 kmod-nfnetlink - 4.9.58-1 kmod-nls-base - 4.9.58-1 kmod-nls-cp437 - 4.9.58-1 kmod-nls-iso8859-1 - 4.9.58-1 kmod-nls-utf8 - 4.9.58-1 kmod-owl-loader - 4.9.58-1 kmod-ppp - 4.9.58-1 kmod-pppoa - 4.9.58-1 kmod-pppoe - 4.9.58-1 kmod-pppox - 4.9.58-1 kmod-sched-cake - 4.9.58+2017-01-28-9789742c-1 kmod-sched-connmark - 4.9.58-1 kmod-sched-core - 4.9.58-1 kmod-scsi-core - 4.9.58-1 kmod-sit - 4.9.58-1 kmod-slhc - 4.9.58-1 kmod-tun - 4.9.58-1 kmod-usb-core - 4.9.58-1 kmod-usb-dwc2 - 4.9.58-1 kmod-usb-ledtrig-usbport - 4.9.58-1 kmod-usb-storage - 4.9.58-1 kmod-usb-storage-extras - 4.9.58-1 lede-keyring - 2017-01-20-a50b7529-1 libblobmsg-json - 2017-09-29-632688e8-1 libbz2 - 1.0.6-3 libc - 1.1.16-1 libgcc - 5.5.0-1 libip4tc - 1.6.1-1 libip6tc - 1.6.1-1 libjson-c - 0.12.1-1 libjson-script - 2017-09-29-632688e8-1 libnl-tiny - 0.1-5 libpthread - 1.1.16-1 librt - 1.1.16-1 libubox - 2017-09-29-632688e8-1 libubus - 2017-02-18-34c6e818-1 libuci - 2017-09-29-5ad59ad4-1 libuclient - 2017-09-06-24d6eded-1 libxtables - 1.6.1-1 linux-atm - 2.5.2-5 logd - 2017-09-01-b1bc8d5f-1 ltq-vdsl-app - 4.17.18.6-1 mtd - 21 netifd - 2017-10-19-0f96606b-1 odhcp6c - 2017-09-05-51733a6d-4 odhcpd - 2017-09-16-f0bce9cd-1 opkg - 2017-07-28-4bd8601e-1 ppp - 2.4.7-12 ppp-mod-pppoa - 2.4.7-12 ppp-mod-pppoe - 2.4.7-12 procd - 2017-09-28-ee582d16-1 swconfig - 11 ubi-utils - 1.5.2-1 ubox - 2017-09-01-b1bc8d5f-1 ubus - 2017-02-18-34c6e818-1 ubusd - 2017-02-18-34c6e818-1 uci - 2017-09-29-5ad59ad4-1 uclient-fetch - 2017-09-06-24d6eded-1 usign - 2015-07-04-ef641914-1 wpad-mini - 2017-08-24-c2d4f2eb-4

- What happend:
Simply after two days of use the module dumps, the wireless seems to be functional.

   
[41236.705664] WARNING: CPU: 0 PID: 0 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0x254/0x95c [mac80211]
[41236.716503] Modules linked in: ath9k ath9k_common ath9k_hw ath10k_pci ath10k_core ath pppoe nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CLASSIFY ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda pppox ppp_async owl_loader nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache ltq_deu_vr9 iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat fuse sch_cake
[41236.787367]  act_connmark nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress drv_dsl_cpe_api ledtrig_usbport drv_mei_cpe xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables pppoatm ppp_generic slhc ifb sit tunnel4 ip_tunnel tun vfat fat ntfs br2684 atm nls_utf8 nls_iso8859_1 nls_cp437 drv_ifxos cmac usb_storage dwc2 sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache crc32c_generic
[41236.857968] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.58 #0
[41236.863880] Stack : 00000000 00000000 806b804a 00000033 8042ca84 00000000 00000000 806b0000
[41236.872229]         8055dfac 8055dba7 804efd64 00000000 00000000 806b3d84 00000004 87285b58
[41236.880584]         00000000 80071fd8 00000001 806b0000 80563d04 80563d08 804f494c 87c0dd04
[41236.888940]         00000003 800af288 00000004 87285b58 00000000 80560000 00000001 87c0dd00
[41236.897296]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[41236.905652]         ...
[41236.908090] Call Trace:
[41236.910548] [<80010780>] show_stack+0x54/0x88
[41236.914912] [<801f4144>] dump_stack+0xd4/0x110
[41236.919352] [<8002f6b0>] __warn+0xe4/0x118
[41236.923431] [<8002f778>] warn_slowpath_null+0x1c/0x34
[41236.928587] [<87127328>] ieee80211_rx_napi+0x254/0x95c [mac80211]
[41236.934653] [<86e07c7c>] ath_rx_tasklet+0xca0/0xcec [ath9k]
[41236.940160] [<86e04fac>] ath9k_tasklet+0x188/0x224 [ath9k]
[41236.945651] [<80033ef4>] tasklet_action+0x140/0x234
[41236.950502] [<80033588>] __do_softirq+0x294/0x2e0
[41236.955201] [<8003387c>] irq_exit+0x7c/0x98
[41236.959377] [<80003194>] ltq_hw_irqdispatch+0xa8/0xe4
[41236.964433] [<8000aca8>] except_vec_vi_end+0xb8/0xc4
[41236.969389] [<8000c664>] r4k_wait_irqoff+0x18/0x20
[41236.974179] [<8006b1a4>] cpu_startup_entry+0xf4/0x150
[41236.979230] [<80578be0>] start_kernel+0x478/0x498
04.11.20171144Base systemBug ReportVery LowLowOpkg fails with Out of memory on a TP-Link RE450TrunkUnconfirmed Task Description

Hi!

I a problem on my TPLINK RE450 on upgrading of packages. I’m restarting the system and the upgrade is still not possible, console output:

BusyBox v1.25.1 () built-in shell (ash)

     _________
    /        /\      _    ___ ___  ___
   /  LE    /  \    | |  | __|   \| __|
  /    DE  /    \   | |__| _|| |) | _|
 /________/  LE  \  |____|___|___/|___|                      lede-project.org
 \        \   DE /
  \    LE  \    /  -----------------------------------------------------------
   \  DE    \  /    Reboot (17.01.4, r3560-79f57e422d)
    \________\/    -----------------------------------------------------------

root@LEDE:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root                 2560      2560         0 100% /rom
tmpfs                    30332        80     30252   0% /tmp
/dev/mtdblock3            2176       236      1940  11% /overlay
overlayfs:/overlay        2176       236      1940  11% /
tmpfs                      512         0       512   0% /dev
root@LEDE:~# free
             total       used       free     shared    buffers     cached
Mem:         60664      43600      17064         80       2320       6048
-/+ buffers/cache:      35232      25432
Swap:            0          0          0
root@LEDE:~# opkg update
Downloading http://downloads.lede-project.org/releases/17.01.4/targets/ar71xx/generic/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_core
Downloading http://downloads.lede-project.org/releases/17.01.4/targets/ar71xx/generic/packages/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/base/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_base
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/base/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/luci/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_luci
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/luci/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_packages
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/packages/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/routing/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_routing
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/routing/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/telephony/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_telephony
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/telephony/Packages.sig
Signature check passed.
root@LEDE:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root                 2560      2560         0 100% /rom
tmpfs                    30332       568     29764   2% /tmp
/dev/mtdblock3            2176       236      1940  11% /overlay
overlayfs:/overlay        2176       236      1940  11% /
tmpfs                      512         0       512   0% /dev
root@LEDE:~# free
             total       used       free     shared    buffers     cached
Mem:         60664      44804      15860        568       2320       6756
-/+ buffers/cache:      35728      24936
Swap:            0          0          0
root@LEDE:~# opkg list upgradable
root@LEDE:~# opkg list-upgradable
luci-lib-ip - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-theme-bootstrap - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
dnsmasq - 2.78-1 - 2.78-2
luci-app-firewall - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-proto-ppp - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-mod-admin-full - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-base - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-proto-ipv6 - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-lib-nixio - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-lib-jsonc - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
root@LEDE:~# opkg upgrade luci-base
Upgrading luci-base on root from git-17.290.79498-d3f0685-1 to git-17.298.45605-07e7ff0-1...
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/luci/luci-base_git-17.298.45605-07e7ff0-1_mips_24kc.ipk
Collected errors:
 * xsystem: wget: vfork: Out of memory.
 * opkg_download: Failed to download http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/luci/luci-base_git-17.298.45605-07e7ff0-1_mips_24kc.ipk, wget returned -1.
 * opkg_install_pkg: Failed to download luci-base. Perhaps you need to run 'opkg update'?
root@LEDE:~#

It looks like there is enough memory availible, where is the problem? Can someone explain it? With a sysctl -w vm.min_free_kbytes=0 the upgrade is possible.


05.11.20171148Base systemBug ReportVery LowHighAR7 images for Fritz!Box 7170 build but do not bootTrunkUnconfirmed Task Description

Hi there,
I’m trying to get the latest LEDE with Kernel 4.9 up and running with an old Fritz!Box 7170 (ar7/EVA).
The images build fine but they are not booting at all.

Is someone able to help? I have tried to collect the “internet knowledge” about this device in this github.
I also found some very old OpenWRT patches (1)(2) for whom I don’t know if they were ever integrated in master.
I’m not a developer myself, so I don’t even know how to integrate patches to try them out.

I also created a forum thread if anyone has some more tips or ideas.

06.11.20171153Base systemFeature RequestVery LowHighConsider security monitoring featuresTrunkUnconfirmed Task Description

I see it as email notification about security events.

Examples of security events:

  • Attempts to bruteforce SSH password.
  • Appear unknown MAC’s in network.
  • Deauthentication attacks on Wi-Fi.

Monitoring is very important part of security.

08.11.20171158Base systemBug ReportVery LowCriticalATH10k QCA9880 5 Ghz mixed mode (sta and ap) not possib...TrunkUnconfirmed Task Description
 
Hardware: Archer C7 V2
Software: Trunk (r5280)

Using the 5 Ghz radio in accesspoint mode (mode ap) and client mode (mode sta) at the same time doesnt work.
Only client mode works.
No error messages will be generated.
With version V17.01.4 all is fine (same configuration).

Config details:

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11a'
	option path 'pci0000:01/0000:01:00.0'
	option noscan '1'
	option htmode 'VHT80'
	option multicast_querier '0'
	option igmp_snooping '0'
	option distance '8'
	option log_level '3'
	option compression '1'
	option bursting '1'
	option ff '1'
	option country 'US'
	option txpower '23'
	option channel '112'

config wifi-device 'radio1'
	option type 'mac80211'
	option hwmode '11g'
	option path 'platform/qca955x_wmac'
	option noscan '1'
	option htmode 'HT40'
	option distance '15'
	option multicast_querier '0'
	option igmp_snooping '0'
	option log_level '3'
	option compression '1'
	option bursting '1'
	option ff '1'
	option channel '9'
	option country 'US'
	option txpower '24'
	option disabled '0'

config wifi-iface
	option encryption 'psk2'
	option device 'radio0'
	**option mode 'sta'**
	option bssid '08:96:D7:7B:89:BA'
	option key 'xxxxxxxxxxxxxxxxxxxxxx'
	option multicast_querier '0'
	option igmp_snooping '0'
	option ssid 'Fritz_5Ghz'
	option network 'WWAN WWAN6'

config wifi-iface
	option ssid 'im6shop'
	option device 'radio1'
	option key 'xxxxxxxxxxxxxxxxxxxxxx'
	option multicast_querier '0'
	option igmp_snooping '0'
	option network 'LAN'
	option mode 'ap'
	option encryption 'psk2'

config wifi-iface
	option device 'radio0'
	**option mode 'ap'**
	option key 'xxxxxxxxxxxxxxxxxxxxxx'
	option macfilter 'allow'
	list maclist '78:0C:B8:8A:12:45'
	list maclist '88:32:9B:F6:70:79'
	list maclist 'F0:27:65:7F:7A:19'
	option encryption 'psk2+ccmp'
	option network 'LAN'
	option ssid 'im6shop'

If you need further details, let me know

regards Klaus


11.11.20171162Base systemBug ReportVery LowLowwpa_supplicant dead loop in fuction wpas_ctrl_msg_queue...TrunkUnconfirmed Task Description

lede-17.01
https://github.com/lede-project/source.git 4c3953ba291abfb1d28b1452b6e519367bf4f242

db120

I am test ath9k Stability. And after 1 day. wpa_supplicant MSG_DUMP loop:

daemon.debug wpa_supplicant[9844]: CTRL: Had to throttle pending event message transmission for (sock 18 gsock -1)

I have two clients device connect ap. Both two clients all report this log. But ap have no any info. And restart wpa_supplicant with wifi. Log is missing.

14.11.20171169Base systemBug ReportVery LowMediumTP-Link Archer C7 no Wan on intial bootupTrunkUnconfirmed Task Description

On initial bootup my Tp-Link Archer C7 v2 will not get a WAN address using the LEDE firmware. Although the cable is connected and there is a link light the WAN interfaces for v4 and v6 simply say “notconnected”. A manual disable/enable does not resolve the problem the only fix is a physical disconnect and reconnect of the ethernet cable to the WAN interface on the router.

Some other information.
This happens with my Comcast ISP via a cable modem pulling a dhcp and a IPv6-PD address. (Neither comes up)
The connection is a gigabit ethernet connection via a known good cable (tested via a Fluke cable tester).
I have tried multiple modems (Netgear, and 2 Motorola modems)

This happen with any version of LEDE I have tried.

18.11.20171176Base systemBug ReportVery LowLowthermal thermal_zone0: failed to read out thermal zone ...TrunkUnconfirmed Task Description

Supply the following if possible:

- Device problem occurs on

     TP-Link Archer C2600 v1.0 - https://lede-project.org/toh/hwdata/tp-link/tp-link_archer_c2600

- Software versions of LEDE release, packages, etc.

     LEDE Reboot 17.01.4 r3560-79f57e422d / LuCI lede-17.01 branch (git-17.315.61305-a9bddc4)
     Kernel Version	4.4.92

- Steps to reproduce: N/A

 

Error regarding thermal within kernel log: 56757.023342] thermal thermal_zone0: failed to read out thermal zone (-110)

Appears this issue had a patch supplied in 2015? https://patchwork.kernel.org/patch/5978221/

On Tue, Mar 10, 2015 at 04:06:46PM +0100, Hans de Goede wrote:
> Some temperature sensors only get updated every few seconds and while
> waiting for the first irq reporting a (new) temperature to happen there
> get_temp operand will return -EAGAIN as it does not have any data to report
> yet.
>
> Not logging an error in this case avoids messages like these from showing
> up in dmesg on affected systems:
>
> [ 1.219353] thermal thermal_zone0: failed to read out thermal zone 0
> [ 2.015433] thermal thermal_zone0: failed to read out thermal zone 0
> [ 2.416737] thermal thermal_zone0: failed to read out thermal zone 0
>
> Signed-off-by: Hans de Goede hdegoede@redhat.com

18.11.20171177Base systemBug ReportVery LowMediumdnsmasq spams syslog on loss of WAN connectionTrunkNew Task Description

Supply the following if possible:
- Device problem occurs on

Observed on an APU2

- Software versions of LEDE release, packages, etc.

DISTRIB_ID='LEDE'
DISTRIB_RELEASE='SNAPSHOT'
DISTRIB_REVISION='r5244-f0c37f6ceb'
DISTRIB_CODENAME='reboot'
DISTRIB_TARGET='x86/64'
DISTRIB_ARCH='x86_64'
DISTRIB_DESCRIPTION='LEDE Reboot SNAPSHOT r5244-f0c37f6ceb'
DISTRIB_TAINTS='no-all busybox'

# opkg list_installed | grep dnsmasq
dnsmasq - 2.78-2

- Steps to reproduce

In my case, I have an upstream service provisioned with pppoe. Occasionally, the pppoe session dies as the ISP does some kind of unannounced maintenance. Since updating recently from a March 2016 build of OpenWrt, when this outage occurs, dnsmasq sends many messages, like this:

Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied

nearly 30 per second.

25.11.20171190Base systemFeature RequestVery LowLowNETGEAR WNDR3800 USB LED trigger not work properly!TrunkAssigned Task Description

When I plug USB device in USB port, USB is working。I can copy data to usb device. The USB LED show green。But when the data is copying to usb device, the usb led do not blink, just is always green. I select usb trigger and select usbport hub1 and port1. It does not blink too. It means trigger dont work.

model: NETGEAR WNDR3800
Firmware Version LEDE Reboot SNAPSHOT r5420-332438b / LuCI Master (git-17.328.04231-802d5b6)
Kernel Version 4.9.63

By the way, my device work properly in 15.05.1 and 14.07. When I flash LEGE, it have been found this problem.

25.11.20171192Base systemBug ReportVery LowHigh2.4Ghz wifi AP on mt7621 / Afoundry EW1200 doesn't workTrunkUnconfirmed Task Description

Hi LEDE folks!

I’m running the latest snapshot (r5406-5e6792e) of LEDE on an Afoundry EW1200. It’s a vast improvement from the stock firmware - my heartfelt gratitude to the author(s) of the port.

There’s one problem. 5Ghz wifi works fine but 2.4Ghz doesn’t. It detects my 2.4Ghz device and when I hit “scan” in LuCI it returns a list of nearby SSIDs.

But when I try to configure the device as an access point it isn’t visible to any of my devices. I’ve tried various channels / settings but nothing makes a difference.

Steps to reproduce:

1. Install LEDE r5406-5e6792e snapshot (latest at the time of writing) on an Afoundry EW1200
2. Use opkg to install LuCI [NB: I don’t think LuCI is to blame; it’s just the interface I use]
3. In Network/Wireless hit “Scan” for “Generic MAC80211 802.11bgn” and verify it can detect other people’s networks
4. Back in Network/Wireless, hit add (or edit) to configure an access point on that device. Use any settings you like.
5. LuCI shows the AP as running but no other device can detect the SSID it’s broadcasting.

06.12.20171209Base systemBug ReportVery LowMediumWiFi random disconnection on WRT3200ACMTrunkUnconfirmed Task Description

Router: Linksys WRT3200ACM

LEDE: Powered by LuCI lede-17.01 branch (git-17.290.79498-d3f0685) / LEDE Reboot 17.01.4 r3560-79f57e422d

Kernel: 4.4.92

Forum thread: https://forum.openwrt.org/viewtopic.php?pid=369295#p369295

mwlwifi version: kmod-mwlwifi - 4.4.92+10.3.4.0.git-2017-06-06-1

Wireless radio0 is working perfectly fine but not on radio1 or radio2. There’s random disconnection, can happen 3 times a day or once per 3 day. Only solution is to reboot the router. See the forum thread for more information.

10.12.20171216Base systemFeature RequestVery LowLowkmod-mwlwifi: Driver update to support 802.11r FTTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: WRT1900AC + WRT1900ACS
- Software versions of LEDE release, packages, etc.: TRUNK

Commit 760f7bf1b8af6c899ccb14d47e8b987ed9a62adf on Nov 6th updated the mwlwifi driver to accept and MDIE Beacon parameter from hostapd. I have compiled this version in the 17.01.4 SDK and been running for roughly a month with no issues. Please update the firmware for the next release, if possible.

https://github.com/kaloz/mwlwifi/commit/760f7bf1b8af6c899ccb14d47e8b987ed9a62adf

If there is anything I can provide to help out, please let know!

29.12.20171246Base systemBug ReportVery LowLowUbnt Nanostation Loco M2 - WDS link drops out after a f...TrunkUnconfirmed Task Description

Ubnt Nanostation Loco M2 - WDS link drops out after a few hours
I have a pair of Nanostation Loco M2 access points setup as a wireless bridge over a ~1300 foot (~400M) line of sight link.
I have had LEDE 17.01.3, 17.0.4 and OpenWrt SNAPSHOT r5499-575178e / LuCI Master (git-17.343.27587-8e6b1a6).

One is setup as a WDS AP and the other is setup as a WDS Client, after a few hours (4-12 hours?) the link drops out but still says that is connected (if I go to status it shows the other AP as connected but I cannot ping or do anything else across the link).
If I restart the wireless service on the client, the connection comes right back and all is well for a 4-12 hours.
Anyone have any suggestions on where to look? Below are the kernel and system logs for the time period in question:

AP Config files:
/etc/config/network:

config interface 'lan'
	option type 'bridge'
	option ifname 'eth0'
	option proto 'static'
	option netmask '255.255.255.0'
	option ipaddr 'x.x.x.2'
	option gateway 'x.x.x.1'
	option dns 'x.x.x.1'

/etc/config/wireless:

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11g'
	option path 'pci0000:00/0000:00:00.0'
	option channel '1'
	option country 'US'
	option htmode 'HT40'
	option distance '400'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'LAN_bridge'
	option wds '1'
	option key 'SECRET'
	option encryption 'psk2+tkip+ccmp'

Client Config files:
/etc/config/network:

config interface 'lan'
	option type 'bridge'
	option proto 'static'
	option netmask '255.255.255.0'
	option ipaddr 'x.x.x.3'
	option gateway 'x.x.x.1'
	option dns 'x.x.x.1'
	option _orig_ifname 'eth0'
	option _orig_bridge 'true'
	option ifname 'eth0'
	option delegate '0'

/etc/config/wireless:

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11g'
	option path 'pci0000:00/0000:00:00.0'
	option channel '1'
	option htmode 'HT40'
	option country 'US'
	option distance '400'

config wifi-iface
	option ssid 'LAN_bridge'
	option device 'radio0'
	option mode 'sta'
	option bssid 'AP_BSSID'
	option key 'SECRET'
	option wds '1'
	option network 'lan'
	option encryption 'psk2+tkip+ccmp'

AP Syslog:

Sun Nov 26 14:01:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:11:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:21:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:31:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:41:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:51:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:01:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:11:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:21:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
**Somewhere in here the link dropped out and I rebooted the client**
Sun Nov 26 15:28:14 2017 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED ClientMAC
Sun Nov 26 15:28:14 2017 kern.info kernel: [1893620.914221] device wlan0.sta1 left promiscuous mode
Sun Nov 26 15:28:14 2017 kern.info kernel: [1893620.919427] br-lan: port 3(wlan0.sta1) entered disabled state
Sun Nov 26 15:28:52 2017 daemon.info hostapd: wlan0: STA ClientMAC IEEE 802.11: authenticated
Sun Nov 26 15:28:52 2017 daemon.info hostapd: wlan0: STA ClientMAC IEEE 802.11: associated (aid 1)
Sun Nov 26 15:28:52 2017 kern.info kernel: [1893659.422460] device wlan0.sta1 entered promiscuous mode
Sun Nov 26 15:28:52 2017 kern.info kernel: [1893659.440920] br-lan: port 3(wlan0.sta1) entered forwarding state
Sun Nov 26 15:28:52 2017 kern.info kernel: [1893659.447086] br-lan: port 3(wlan0.sta1) entered forwarding state
Sun Nov 26 15:28:53 2017 daemon.notice hostapd: wlan0: AP-STA-CONNECTED ClientMAC
Sun Nov 26 15:28:53 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: pairwise key handshake completed (RSN)
Sun Nov 26 15:28:54 2017 kern.info kernel: [1893661.440359] br-lan: port 3(wlan0.sta1) entered forwarding state
Sun Nov 26 15:31:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:41:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)

AP Kernel Log:

[1649563.614654] br-lan: port 1(eth0) entered disabled state
[1649564.612365] eth0: link up (100Mbps/Full duplex)
[1649564.617165] br-lan: port 1(eth0) entered forwarding state
[1649564.622888] br-lan: port 1(eth0) entered forwarding state
[1649566.620738] br-lan: port 1(eth0) entered forwarding state
[1652624.237670] ------------[ cut here ]------------
[1652624.242540] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.254355] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.264049] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.328632] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.335791] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  ...
[1652624.371919] Call Trace:[<80071a8c>] 0x80071a8c
[1652624.376597] [<80071a8c>] 0x80071a8c
[1652624.380290] [<80081888>] 0x80081888
[1652624.383987] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.390133] [<800818e4>] 0x800818e4
[1652624.393854] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.399981] [<80260a14>] 0x80260a14
[1652624.403663] [<80260bf8>] 0x80260bf8
[1652624.407374] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652624.413800] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652624.419701] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652624.425575] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652624.431446] [<80084448>] 0x80084448
[1652624.435130] [<80083e04>] 0x80083e04
[1652624.438821] [<800a8014>] 0x800a8014
[1652624.442508] [<8006a990>] 0x8006a990
[1652624.446194] [<80060bf4>] 0x80060bf4
[1652624.449876] 
[1652624.451557] ---[ end trace 86b60d5fad42c0e7 ]---
[1652624.456661] ------------[ cut here ]------------
[1652624.461517] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.473297] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.482988] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.547552] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.554704] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  ...
[1652624.590833] Call Trace:[<80071a8c>] 0x80071a8c
[1652624.595502] [<80071a8c>] 0x80071a8c
[1652624.599197] [<80081888>] 0x80081888
[1652624.602893] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.609038] [<800818e4>] 0x800818e4
[1652624.612760] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.618896] [<80260a14>] 0x80260a14
[1652624.622578] [<80260bf8>] 0x80260bf8
[1652624.626277] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652624.632718] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652624.638615] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652624.644489] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652624.650366] [<80084448>] 0x80084448
[1652624.654046] [<80083e04>] 0x80083e04
[1652624.657738] [<800a8014>] 0x800a8014
[1652624.661423] [<8006a990>] 0x8006a990
[1652624.665109] [<80060bf4>] 0x80060bf4
[1652624.668791] 
[1652624.670471] ---[ end trace 86b60d5fad42c0e8 ]---
[1652624.675578] ------------[ cut here ]------------
[1652624.680433] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.692211] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.701903] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.766474] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.773641] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  ...
[1652624.809756] Call Trace:[<80071a8c>] 0x80071a8c
[1652624.814426] [<80071a8c>] 0x80071a8c
[1652624.818120] [<80081888>] 0x80081888
[1652624.821816] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.827961] [<800818e4>] 0x800818e4
[1652624.831683] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.837810] [<80260a14>] 0x80260a14
[1652624.841493] [<80260bf8>] 0x80260bf8
[1652624.845192] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652624.851632] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652624.857530] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652624.863403] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652624.869275] [<80084448>] 0x80084448
[1652624.872960] [<80083e04>] 0x80083e04
[1652624.876638] [<800a8014>] 0x800a8014
[1652624.880331] [<8006a990>] 0x8006a990
[1652624.884015] [<80060bf4>] 0x80060bf4
[1652624.887697] 
[1652624.889376] ---[ end trace 86b60d5fad42c0e9 ]---
[1652624.894482] ------------[ cut here ]------------
[1652624.899340] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.911125] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.920817] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.985380] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.992546] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  ...
[1652625.028662] Call Trace:[<80071a8c>] 0x80071a8c
[1652625.033331] [<80071a8c>] 0x80071a8c
[1652625.037027] [<80081888>] 0x80081888
[1652625.040722] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652625.046868] [<800818e4>] 0x800818e4
[1652625.050589] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652625.056714] [<80260a14>] 0x80260a14
[1652625.060410] [<80260bf8>] 0x80260bf8
[1652625.064115] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652625.070555] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652625.076442] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652625.082330] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652625.088198] [<80084448>] 0x80084448
[1652625.091882] [<80083e04>] 0x80083e04
[1652625.095561] [<800a8014>] 0x800a8014
[1652625.099258] [<8006a990>] 0x8006a990
[1652625.102938] [<80060bf4>] 0x80060bf4
[1652625.106607] 
[1652625.108295] ---[ end trace 86b60d5fad42c0ea ]---
[1656961.531085] device wlan0.sta1 left promiscuous mode
[1656961.536375] br-lan: port 3(wlan0.sta1) entered disabled state
[1657000.400508] device wlan0.sta1 entered promiscuous mode
[1657000.416849] br-lan: port 3(wlan0.sta1) entered forwarding state
[1657000.423019] br-lan: port 3(wlan0.sta1) entered forwarding state
[1657002.415840] br-lan: port 3(wlan0.sta1) entered forwarding state
[1729152.802304] eth0: link down
[1729152.805769] br-lan: port 1(eth0) entered disabled state
[1729180.803335] eth0: link up (100Mbps/Full duplex)
[1729180.808173] br-lan: port 1(eth0) entered forwarding state
[1729180.813898] br-lan: port 1(eth0) entered forwarding state
[1729182.811672] br-lan: port 1(eth0) entered forwarding state
[1893620.914221] device wlan0.sta1 left promiscuous mode
[1893620.919427] br-lan: port 3(wlan0.sta1) entered disabled state
[1893659.422460] device wlan0.sta1 entered promiscuous mode
[1893659.440920] br-lan: port 3(wlan0.sta1) entered forwarding state
[1893659.447086] br-lan: port 3(wlan0.sta1) entered forwarding state
[1893661.440359] br-lan: port 3(wlan0.sta1) entered forwarding state
[1894771.793057] device wlan0.sta1 left promiscuous mode
[1894771.798391] br-lan: port 3(wlan0.sta1) entered disabled state
[1894777.535302] device wlan0.sta1 entered promiscuous mode
[1894777.547462] br-lan: port 3(wlan0.sta1) entered forwarding state
[1894777.553631] br-lan: port 3(wlan0.sta1) entered forwarding state
[1894779.546485] br-lan: port 3(wlan0.sta1) entered forwarding state
[1895148.287966] device wlan0.sta1 left promiscuous mode
[1895148.293178] br-lan: port 3(wlan0.sta1) entered disabled state
[1895148.349721] device wlan0 left promiscuous mode
[1895148.354492] br-lan: port 2(wlan0) entered disabled state
[1895150.539163] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1895150.663905] device wlan0 entered promiscuous mode
[1895153.075046] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[1895153.081886] br-lan: port 2(wlan0) entered forwarding state
[1895153.087660] br-lan: port 2(wlan0) entered forwarding state
[1895154.299110] device wlan0.sta1 entered promiscuous mode
[1895154.316512] br-lan: port 3(wlan0.sta1) entered forwarding state
[1895154.322716] br-lan: port 3(wlan0.sta1) entered forwarding state
[1895155.086003] br-lan: port 2(wlan0) entered forwarding state
[1895156.315941] br-lan: port 3(wlan0.sta1) entered forwarding state

Thanks in advance

Aaron Z


02.01.20181252Base systemBug ReportVery LowLowNo IP Assigned to Interface with QMI on Quectel EC-25ATrunkAssigned Task Description

I’m attempting to use QMI on a GL.Inet MiFi equipped with a Quectel EC-25A cellular modem.

When I configure the interface using qmi I am able to connect to the cellular network at the radio layer, however my wwan0 interface is not assigned an IP address. Here’s my configuration from /etc/config/network:

  config interface 'modem'
          option proto 'qmi'
          option ifname 'wwan0'
          option device '/dev/cdc-wdm0'
          option country 'country11'
          option apn 'inet.bell.ca'

And some commands showing the device behaviour. You’ll note that raw_ip needs to be set to Y. I’ve integrated this [patch](https://github.com/bmork/LEDE/commit/10aed12fa587e818e4dc5d0db54545623fbe9b5f) to have qmi.sh set the raw_ip mode when required.

  root@OpenWrt:~# cat /sys/class/net/wwan0/qmi/raw_ip
  Y
  root@OpenWrt:~# ifup modem
  root@OpenWrt:~# uqmi -d /dev/cdc-wdm0 --get-data-status
  "connected"
  root@OpenWrt:~# uqmi -d /dev/cdc-wdm0 --get-current-settings
  {
      "pdp-type": "ipv4",
      "ip-family": "ipv4",
      "mtu": 1500,
      "ipv4": {
          "ip": "100.105.180.51",
          "dns1": "206.47.201.246",
          "dns2": "207.231.231.254",
          "gateway": "100.105.180.52",
          "subnet": "255.255.255.248"
      },
      "ipv6": {
          
      },
      "domain-names": {
          
      }
  }
  root@OpenWrt:~# ifconfig wwan0
  wwan0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
            inet6 addr: fe80::d789:480e:bfc8:2dac/64 Scope:Link
            UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
            RX packets:28 errors:0 dropped:0 overruns:0 frame:0
            TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000 
            RX bytes:5129 (5.0 KiB)  TX bytes:768 (768.0 B)

If I manually use the uqmi command to connect to the cellular network I can then drive the wwan0 interface using dhcp successfully. Here’s my /etc/config/network.

  config interface 'modem'
          option proto 'dhcp'
          option ifname 'wwan0'

And the resulting successful network connection:

  root@OpenWrt:~# ifup modem
  root@OpenWrt:~# ifconfig wwan0
  wwan0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
            inet addr:100.105.180.51  P-t-P:100.105.180.51  Mask:255.255.255.248
            inet6 addr: fe80::d789:480e:bfc8:2dac/64 Scope:Link
            UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
            RX packets:80 errors:0 dropped:0 overruns:0 frame:0
            TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000 
            RX bytes:24102 (23.5 KiB)  TX bytes:16842 (16.4 KiB)
  root@OpenWrt:~# ping -c 1 google.ca
  PING google.ca (172.217.1.163): 56 data bytes
  64 bytes from 172.217.1.163: seq=0 ttl=51 time=29.792 ms
  1. – google.ca ping statistics —

1 packets transmitted, 1 packets received, 0% packet loss

  round-trip min/avg/max = 29.792/29.792/29.792 ms

I believe that for some reason the dhcp client isn’t being run on the wwan0 interface by qmi.sh once it’s online but I’m not able to determine how this is supposed to work. I’m eager to address this issue and submit the resulting patches. Please let me know if you can help.

  root@OpenWrt:~# ping -c 1 8.8.8.8
  PING 8.8.8.8 (8.8.8.8): 56 data bytes
  64 bytes from 8.8.8.8: seq=0 ttl=54 time=31.805 ms
  1. – 8.8.8.8 ping statistics —

1 packets transmitted, 1 packets received, 0% packet loss

  round-trip min/avg/max = 31.805/31.805/31.805 ms
11.01.20181266Base systemBug ReportVery LowMediumsysupgrade-x86 should detect boot partition properlyTrunkUnconfirmed Task Description

Currently it’s hard-coded into /lib/preinit/79_move_config as:

move_config() {
	local partdev

	. /lib/upgrade/common.sh

	if export_bootdevice && export_partdevice partdev 1; then
		mkdir -p /boot
		if mount -t ext4 -o ro,noatime "/dev/$partdev" /boot; then
			if [ -f /boot/sysupgrade.tgz ]; then
				mount /boot -o remount,rw,noatime
				mv -f /boot/sysupgrade.tgz /
				mount /boot -o remount,ro,noatime
			fi
			mount --bind /boot/boot /boot
		fi
	fi
}

that the first partition of the boot device is the boot partition. That’s not always the case, and EFI seems to break this.

Also, it’s an obstacle to supporting A/B image+config boot modes.

19.01.20181284Base systemBug ReportVery LowLowuboot-kirkwood does not speak MMC on Pogoplug v4TrunkUnconfirmed Task Description

Testing on a Pogoplug V4 with the u-boot committed in f5d267df638d7adc6654f4a1a3d7c7557cafd759, there is no MMC support despite that 010-pogoplug_v4.patch includes kirkwood_mmc.c and friends. Boot messages are simply

U-Boot 2017.09 (Jan 19 2018 - 21:51:49 +0000)
Pogoplug V4

SoC:   Kirkwood 88F6281_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  128 MiB
MMC:   
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   egiga0
Error: egiga0 address not set.

On the other hand, the uboot shipped from https://forum.doozan.com/read.php?3,7477,7553 understands MMC. Its boot messages are

U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700)
Pogoplug V4

SoC:   Kirkwood 88F6192_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  128 MiB
MMC:   MVEBU_MMC: 0
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
22.01.20181286Base systemBug ReportVery LowHighNetwork startup happens too late with kernel 4.14TrunkUnconfirmed Task Description

Software version: r5917-36f1978a70-x86-64, device: x86-64 PC.

I’ve built 2 versions - one with default kernel 4.9 and another one with kernel 4.14.

The version with kernel 4.9 works fine. Netifd sets up network interfaces, after that another daemons are started.

The version with kernel 4.14 does not work as expected. Another daemons are started before network interface setup. In my case, this prevents the VPN server from working correctly. I have to manually restart VPN service after every reboot. This may potentially affect another software.

I have attached the log files. Please note the startup order as found in the log files:

kernel 4.9: netifd interface setup → block → dropbear → xl2tpd → openvpn
kernel 4.14: block → dropbear → xl2tpd → openvpn → netifd interface setup

I have no idea how a kernel version may affect the startup order. Maybe there is a kind of race condition.


24.01.20181293Base systemBug ReportVery LowLowThe newest trunk source make ar9344 db120 reference boa...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on AR9344 DB120
- The newest version.
- Steps to reproduce

 

## Booting image at 9f680000 ...

 Image Name:   MIPS OpenWrt Linux-4.9.77
 Created:      2018-01-24   6:33:42 UTC
 Image Type:   MIPS Linux Kernel Image (lzma compressed)
 Data Size:    1379382 Bytes =  1.3 MB
 Load Address: 80060000
 Entry Point:  80060000
 Verifying Checksum at 0x9f680040 ...OK
 Uncompressing Kernel Image ... OK

No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 134217728

Starting kernel ...

[ 0.000000] Linux version 4.9.77 () (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r5935-c25d9cb) ) #0 Wed Jan 24 06:33:42 2018
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9344 rev 3
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),64k(mib0),64k(ART),6336k(rootfs.up),1408k(uImage.up),448k(rev) mem=128M rootfstype=squashfs noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 124872K/131072K available (3174K kernel code, 166K rwdata, 792K rodata, 276K init, 213K bss, 6200K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
[ 0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
[ 0.008310] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[ 0.081147] pid_max: default: 32768 minimum: 301
[ 0.086166] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.093213] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.103149] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.113657] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.120688] NET: Registered protocol family 16
[ 0.126898] MIPS: machine is Generic AR71XX/AR724X/AR913X based board
[ 0.149064] clocksource: Switched to clocksource MIPS
[ 0.155465] NET: Registered protocol family 2
[ 0.160930] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.168359] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.175173] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.182033] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.188261] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.195205] NET: Registered protocol family 1
[ 0.203762] Crashlog allocated RAM at address 0x3f00000
[ 0.210313] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.223987] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.230227] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 0.248339] io scheduler noop registered
[ 0.252559] io scheduler deadline registered (default)
[ 0.258371] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.265586] console [ttyS0] disabled
[ 0.289473] serial8250.0: ttyS0 at MMIO 0×18020000 (irq = 11, base_baud = 2500000) is a 16550A
[ 0.298657] console [ttyS0] enabled
[ 0.298657] console [ttyS0] enabled
[ 0.306083] bootconsole [early0] disabled
[ 0.306083] bootconsole [early0] disabled
[ 0.316280] libphy: Fixed MDIO Bus: probed
[ 0.323674] NET: Registered protocol family 10
[ 0.337759] NET: Registered protocol family 17
[ 0.342465] 8021q: 802.1Q VLAN Support v1.8
[ 0.349040] VFS: Cannot open root device “31:02” or unknown-block(31,2): error -6
[ 0.356677] Please append a correct “root=” boot option; here are the available partitions:
[ 0.365163] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)
[ 0.374233] Rebooting in 1 seconds..

25.01.20181300Base systemBug ReportVery LowCriticalRT-N12+(MT7620N): WLAN not working.TrunkUnconfirmed Task Description

Hello,

Device: RT-N12+
Issue: WLAN is not working properly. When enabled the signal status shows 0db noise 0db. Wireless devices would properly show the SSID however unable to join. Even with No encryption. The system log would even show that radio0 is up.
Steps done:
- Reboot Router
- Re-flash firmware
- Manually set WiFi config: Band 20mhz or 40mhz.
- Toggled between N and Legacy.
- Manually set WiFi channels.
- Tried different encryption.

Additional information:
- I am well aware that this router support is still WIP as stated: https://lede-project.org/toh/hwdata/asus/asus_rt-n12 Basically just putting out this bug report since so far everything seemed fine except for wireless broadcast.
- Used latest snapshot build from downloads page dated: Thu Jan 25 12:07:37 2018

26.01.20181304Base systemBug ReportVery LowMediumDDNS does not function with QMI protocol and IP does no...TrunkUnconfirmed Task Description

I am using OpenWrt SNAPSHOT, r5934-059b2f5 with an ec-25e card using QMI.

Device gets an IP properly.

Thu Jan 25 18:26:27 2018 daemon.notice netifd: Interface 'wwan' is now down
Thu Jan 25 18:26:28 2018 daemon.notice netifd: Interface 'wwan' is setting up now
Thu Jan 25 18:26:28 2018 daemon.notice netifd: wwan (16229): Device does not support 802.3 mode. Informing driver of raw-ip only for wwan0 ..
Thu Jan 25 18:26:28 2018 daemon.notice netifd: wwan (16229): Waiting for network registration
Thu Jan 25 18:26:28 2018 daemon.notice netifd: wwan (16229): Starting network wwan
Thu Jan 25 18:26:28 2018 daemon.notice netifd: wwan (16229): Setting up wwan0
Thu Jan 25 18:26:28 2018 daemon.notice netifd: Interface 'wwan' is now up
Thu Jan 25 18:26:28 2018 daemon.notice netifd: Network device 'wwan0' link is up
Thu Jan 25 18:26:28 2018 daemon.notice netifd: Network alias 'wwan0' link is up
Thu Jan 25 18:26:28 2018 daemon.notice netifd: Interface 'wwan_4' is enabled
Thu Jan 25 18:26:28 2018 daemon.notice netifd: Interface 'wwan_4' has link connectivity
Thu Jan 25 18:26:28 2018 daemon.notice netifd: Interface 'wwan_4' is setting up now
Thu Jan 25 18:26:28 2018 daemon.notice netifd: wwan_4 (16355): udhcpc: started, v1.27.2
Thu Jan 25 18:26:28 2018 daemon.notice netifd: wwan_4 (16355): udhcpc: sending discover
Thu Jan 25 18:26:28 2018 daemon.notice netifd: wwan_4 (16355): udhcpc: sending select for 10.36.238.224
Thu Jan 25 18:26:29 2018 daemon.notice netifd: wwan_4 (16355): udhcpc: lease of 10.36.238.224 obtained, lease time 7200
Thu Jan 25 18:26:29 2018 daemon.notice netifd: Interface 'wwan_4' is now up

However in LuCI the IP address is not shown in the interfaces section, at `wwan` interface.

Also DDNS scripts fail with error

182633 ERROR : Can not detect local IP using network_get_ipaddr 'wwan' - Error: '1' - TERMINATE

I believe the issue is because the interface name which gets the IP is `wwan_4` instead of `wwan` but I am not able to set this interface in DDNS setup from LuCI and also well LuCI does not show the `wwan` IP address. I am not sure what would be the fix but this clearly is a problem and may effect other things as well.

Thanks!

28.01.20181307Base systemBug ReportVery LowCriticalClearFog initramfs broken AllUnconfirmed Task Description

It appears this has been broken for quite some time, likely before LEDE forked from OpenWrt, as there are CC builds with initrams images working fine (early 2016), however the CC repo no longer compiles a working initrams image, nor does LEDE.

  • The changes causing the issue appear to have occurred between 2016.02.18 and 2016.09.06
    • I have a working OpenWrt initramfs image created 2016.02.17 @14:26:46 UTC which boots w/o issue.
    • This post from the SolidRun forum on 2016.09.06 @ 10:30am (local) verifies boot issues occurring at least as of this date.
      • Xue Liu’s [clockworkbird9] repo is mentioned and a link to his blog is provided, however he either forked OpenWrt prior to the issue originating or fixed whatever was broken.

Unexpected Output

Current LEDE/OpenWrt initramfs image is a mess all around (Compiled 2018.01.25)

   Marvell>> tftpboot lede-mvebu-armada-388-clearfog-pro-initramfs.bin
   Using egiga1 device
   TFTP from server 10.4.50.38; our IP address is 10.4.50.170
   Filename 'lede-mvebu-armada-388-clearfog-pro-initramfs.bin'.
   Load address: 0x2000000
   Loading: #################################################################
	        #################################################################
	        #################################################################
	        2.4 MiB/s
   done
   Bytes transferred = 4690096 (4790b0 hex)
 
   Marvell>> bootm
   Wrong Image Format for bootm command
   ERROR: cant get kernel image!
  • Likely due to these options being removed from menuconfig:
    • Target Images
      • Include kernel in root filesystem
        • include uImage
        • include zImage
        • include FIT
      • Include DTB in root filesystem
    • See Screenshot
      • Left: Old OpenWrt Repo
      • Right: Current LEDE/OpenWrt Repo

Booting a LEDE zImage goes a bit better (...until the kernel panic | Compiled 2018.01.25)

  • This may be expected behavior, as I didn’t realize the zImage is the kernel image.
    Marvell>> tftpboot zImage-Solidrun-Clearfog-A1                 
    Using egiga1 device
    TFTP from server 10.4.50.38; our IP address is 10.4.50.170
    Filename 'zImage-Solidrun-Clearfog-A1'.
    Load address: 0x2000000
    Loading: #################################################################
    	 #################################################################
    	 #################################################################
    	 2.4 MiB/s
    done
    Bytes transferred = 2132324 (208964 hex)
    Marvell>> bootz
 
    Starting kernel ...
 
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Linux version 4.4.14 (thepeople@trabant) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 50140) ) #1 SMP Thu Dec 7 14:50:07 UTC 2017
    [    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [    0.000000] Machine model: SolidRun Clearfog A1
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] PERCPU: Embedded 12 pages/cpu @ef7ce000 s17984 r8192 d22976 u49152
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
    [    0.000000] Kernel command line: 
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Memory: 1032820K/1048576K available (4223K kernel code, 178K rwdata, 1572K rodata, 264K init, 301K bss, 15756K reserved, 0K cma-reserved, 262144K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    [    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc05b1078   (5797 kB)
    [    0.000000]       .init : 0xc05b2000 - 0xc05f4000   ( 264 kB)
    [    0.000000]       .data : 0xc05f4000 - 0xc0620a5c   ( 179 kB)
    [    0.000000]        .bss : 0xc0620a5c - 0xc066c244   ( 302 kB)
    [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
    [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
    [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
    [    0.000000] L2C-310 D prefetch enabled, offset 1 lines
    [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
    [    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
    [    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
    [    0.000000] Switching to timer-based delay loop, resolution 40ns
    [    0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
    [    0.000009] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
    [    0.000106] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
    [    0.000113] pid_max: default: 32768 minimum: 301
    [    0.000148] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000152] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000340] CPU: Testing write buffer coherency: ok
    [    0.000439] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.000465] Setting up static identity map for 0x8280 - 0x82d8
    [    0.000550] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0x4
    [    0.000633] mvebu-pmsu: Initializing Power Management Service Unit
    [    0.001026] Booting CPU 1
    [    0.001190] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.001218] Brought up 2 CPUs
    [    0.001223] SMP: Total of 2 processors activated (100.00 BogoMIPS).
    [    0.001226] CPU: All CPU(s) started in SVC mode.
    [    0.002883] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    [    0.002954] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    [    0.003000] pinctrl core: initialized pinctrl subsystem
    [    0.003380] NET: Registered protocol family 16
    [    0.003837] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [    0.029930] cpuidle: using governor ladder
    [    0.032504] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
    [    0.032512] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
    [    0.060714] SCSI subsystem initialized
    [    0.060995] usbcore: registered new interface driver usbfs
    [    0.061020] usbcore: registered new interface driver hub
    [    0.061042] usbcore: registered new device driver usb
    [    0.061712] clocksource: Switched to clocksource armada_370_xp_clocksource
    [    0.062143] NET: Registered protocol family 2
    [    0.062382] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.062424] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.062484] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.062516] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.062538] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.062619] NET: Registered protocol family 1
    [    0.062981] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.065945] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.065956] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    0.066587] bounce: pool size: 64 pages
    [    0.066594] io scheduler noop registered
    [    0.066599] io scheduler deadline registered (default)
    [    0.066978] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
    [    0.067276] irq: Cannot allocate irq_descs @ IRQ50, assuming pre-allocated
    [    0.067412] irq: Cannot allocate irq_descs @ IRQ82, assuming pre-allocated
    [    0.067660] mv_xor f1060800.xor: Marvell shared XOR driver
    [    0.101937] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
    [    0.102017] mv_xor f1060900.xor: Marvell shared XOR driver
    [    0.141919] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
    [    0.142055] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
    [    0.142889] console [ttyS0] disabled
    [    0.162961] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 15625000) is a 16550A
    [    0.715227] console [ttyS0] enabled
    [    0.738916] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 15625000) is a 16550A
    [    0.748295] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.757374] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
    [    0.766754] scsi host0: ahci-mvebu
    [    0.770314] scsi host1: ahci-mvebu
    [    0.773824] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 45
    [    0.781766] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 45
    [    0.789792] ahci-mvebu f10e0000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.798869] ahci-mvebu f10e0000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
    [    0.808345] scsi host2: ahci-mvebu
    [    0.811918] scsi host3: ahci-mvebu
    [    0.815415] ata3: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x100 irq 46
    [    0.823359] ata4: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x180 irq 46
    [    0.832327] libphy: Fixed MDIO Bus: probed
    [    0.836538] libphy: orion_mdio_bus: probed
    [    0.841803] mvneta f1030000.ethernet eth0: Using hardware mac address 00:50:43:4c:18:3b
    [    0.850637] mvneta f1034000.ethernet eth1: Using random mac address c6:31:9b:9c:a7:67
    [    0.859250] mvneta f1070000.ethernet eth2: Using hardware mac address 00:50:43:ee:18:3b
    [    0.867330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.873879] ehci-pci: EHCI PCI platform driver
    [    0.878359] ehci-platform: EHCI generic platform driver
    [    0.883691] ehci-orion: EHCI orion driver
    [    0.887777] orion-ehci f1058000.usb: EHCI Host Controller
    [    0.893203] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
    [    0.900847] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000
    [    0.921501] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
    [    0.927667] hub 1-0:1.0: USB hub found
    [    0.931437] hub 1-0:1.0: 1 port detected
    [    0.935663] xhci-hcd f10f0000.usb3: xHCI Host Controller
    [    0.940994] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
    [    0.948605] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
    [    0.957170] xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000
    [    0.963146] hub 2-0:1.0: USB hub found
    [    0.966914] hub 2-0:1.0: 1 port detected
    [    0.970927] xhci-hcd f10f0000.usb3: xHCI Host Controller
    [    0.976265] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
    [    0.983796] usb usb3: We dont know the algorithms for LPM for this host, disabling LPM.
    [    0.992105] hub 3-0:1.0: USB hub found
    [    0.995872] hub 3-0:1.0: 1 port detected
    [    0.999930] xhci-hcd f10f8000.usb3: xHCI Host Controller
    [    1.005271] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
    [    1.012863] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
    [    1.021422] xhci-hcd f10f8000.usb3: irq 49, io mem 0xf10f8000
    [    1.027391] hub 4-0:1.0: USB hub found
    [    1.031159] hub 4-0:1.0: 1 port detected
    [    1.035201] xhci-hcd f10f8000.usb3: xHCI Host Controller
    [    1.040528] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
    [    1.048072] usb usb5: We dont know the algorithms for LPM for this host, disabling LPM.
    [    1.056389] hub 5-0:1.0: USB hub found
    [    1.060156] hub 5-0:1.0: 1 port detected
    [    1.064290] usbcore: registered new interface driver usb-storage
    [    1.070460] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
    [    1.078105] i2c /dev entries driver
    [    1.092469] orion_wdt: Initial timeout 171 sec
    [    1.097786] marvell-cesa f1090000.crypto: CESA device successfully registered
    [    1.105445] NET: Registered protocol family 10
    [    1.110382] NET: Registered protocol family 17
    [    1.114870] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
    [    1.127526] Bridge firewalling registered
    [    1.131551] 8021q: 802.1Q VLAN Support v1.8
    [    1.135771] Registering SWP/SWPB emulation handler
    [    1.141319] armada38x-rtc f10a3800.rtc: setting system clock to 1970-06-02 16:51:43 UTC (13193503)
    [    1.141517] ata1: SATA link down (SStatus 0 SControl 300)
    [    1.141542] ata2: SATA link down (SStatus 0 SControl 300)
    [    1.161504] ata4: SATA link down (SStatus 0 SControl 300)
    [   1.166942] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.172389] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
    [    1.179889] Please append a correct "root=" boot option; here are the available partitions:
    [    1.188270] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
    [    1.196553] CPU1: stopping
    [    1.199266] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.14 #1
    [    1.205198] Hardware name: Marvell Armada 380/385 (Device Tree)
    [    1.211142] [<c001fab8>] (unwind_backtrace) from [<c001c420>] (show_stack+0x10/0x14)
    [    1.218909] [<c001c420>] (show_stack) from [<c019f54c>] (dump_stack+0x8c/0xa0)
    [    1.226149] [<c019f54c>] (dump_stack) from [<c001e94c>] (handle_IPI+0x108/0x1a0)
    [    1.233563] [<c001e94c>] (handle_IPI) from [<c0009508>] (gic_handle_irq+0x80/0x94)
    [    1.241151] [<c0009508>] (gic_handle_irq) from [<c000a5f4>] (__irq_svc+0x54/0x70)
    [    1.248650] Exception stack(0xef073f80 to 0xef073fc8)
    [    1.253712] 3f80: 00000001 00000000 00000000 c000b3c0 ef072000 c05f6498 c04fcab4 00000000
    [    1.261909] 3fa0: c05ee224 ef073fd8 00000000 c05f1118 00000000 ef073fd0 c00194cc c00194d0
    [    1.270104] 3fc0: 60000013 ffffffff
    [    1.273600] [<c000a5f4>] (__irq_svc) from [<c00194d0>] (arch_cpu_idle+0x34/0x50)
    [    1.281015] [<c00194d0>] (arch_cpu_idle) from [<c005b324>] (cpu_startup_entry+0x148/0x210)
    [    1.289298] [<c005b324>] (cpu_startup_entry) from [<000095ac>] (0x95ac)
    [    1.295928] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

Current OpenWrt CC initramfs freezes upon loading the kernel (Compiled 2018.01.27)

   Marvell>> tftpboot openwrt-mvebu-armada-388-clearfog-initramfs
   Using egiga1 device
   TFTP from server 10.4.50.38; our IP address is 10.4.50.170
   Filename 'openwrt-mvebu-armada-388-clearfog-initramfs'.
   Load address: 0x2000000
   Loading: #################################################################
	        #################################################################
	        #################################################################
	        2.4 MiB/s
   done
   Bytes transferred = 7925725 (78efdd hex)
 
   Marvell>> bootm
   ## Booting kernel from Legacy Image at 02000000 ...
      Image Name:   ARM OpenWrt Linux-3.18.91
      Created:      2018-01-27   3:22:24 UTC
      Image Type:   ARM Linux Kernel Image (uncompressed)
      Data Size:    7925661 Bytes = 7.6 MiB
      Load Address: 00008000
      Entry Point:  00008000
      Verifying Checksum ... OK
      Loading Kernel Image ... OK
   OK
 
   Starting kernel ...
  • It freezes at this point, with no further output

Expected Output (working initramfs)

r48735 (Compiled 2016.02.17)

    Marvell>> tftpboot openwrt-mvebu-armada-388-clearfog-initramfs
    Using egiga1 device
    TFTP from server 10.4.50.38; our IP address is 10.4.50.170
    Filename 'openwrt-mvebu-armada-388-clearfog-initramfs'.
    Load address: 0x2000000
    Loading: #################################################################
    	  #################################################################
    	  #################################################################
    	  2.4 MiB/s
    done
    Bytes transferred = 3022310 (2e1de6 hex)
 
    Marvell>> bootm
    ## Booting kernel from Legacy Image at 02000000 ...
       Image Name:   ARM OpenWrt Linux-4.1.16
       Created:      2016-02-17  14:26:46 UTC
       Image Type:   ARM Linux Kernel Image (uncompressed)
       Data Size:    3022246 Bytes = 2.9 MiB
       Load Address: 00008000
       Entry Point:  00008000
       Verifying Checksum ... OK
       Loading Kernel Image ... OK
    OK
 
    Starting kernel ...
 
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Linux version 4.1.16 (vlado@b50) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r48723) ) #6 SMP Wed Feb 17 14:59:16 UTC 2016
    [    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [    0.000000] Machine model: SolidRun Clearfog A1
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] PERCPU: Embedded 10 pages/cpu @eefd1000 s11776 r8192 d20992 u40960
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
    [    0.000000] Kernel command line: 
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Memory: 1029820K/1048576K available (3435K kernel code, 138K rwdata, 1228K rodata, 4592K init, 168K bss, 18756K reserved, 0K cma-reserved, 270336K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc0495e9c   (4664 kB)
    [    0.000000]       .init : 0xc0496000 - 0xc0912000   (4592 kB)
    [    0.000000]       .data : 0xc0912000 - 0xc09348dc   ( 139 kB)
    [    0.000000]        .bss : 0xc09348dc - 0xc095e9a4   ( 169 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
    [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
    [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
    [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
    [    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
    [    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x46070001
    [    0.000006] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
    [    0.000016] clocksource armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
    [    0.000157] Calibrating delay loop... 3188.32 BogoMIPS (lpj=15941632)
    [    0.059922] pid_max: default: 32768 minimum: 301
    [    0.059975] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.059980] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.060187] CPU: Testing write buffer coherency: ok
    [    0.060286] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.060311] Setting up static identity map for 0x8280 - 0x82d8
    [    0.060398] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0x4
    [    0.060484] mvebu-pmsu: Initializing Power Management Service Unit
    [    0.060915] Booting CPU 1
    [    0.119940] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.119969] Brought up 2 CPUs
    [    0.119975] SMP: Total of 2 processors activated (6384.02 BogoMIPS).
    [    0.119978] CPU: All CPU(s) started in SVC mode.
    [    0.121764] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    [    0.121843] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    [    0.121875] pinctrl core: initialized pinctrl subsystem
    [    0.122216] NET: Registered protocol family 16
    [    0.122655] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [    0.149929] cpuidle: using governor ladder
    [    0.152518] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
    [    0.152527] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling[    0.180892] Switched to clocksource armada_370_xp_clocksource
    [    0.181354] NET: Registered protocol family 2
    [    0.181626] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.181665] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.181728] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.181766] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.181790] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.181897] NET: Registered protocol family 1
    [    0.202800] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.203086] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.203094] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    0.203620] bounce: pool size: 64 pages
    [    0.203629] io scheduler noop registered
    [    0.203635] io scheduler deadline registered (default)
    [    0.204062] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
    [    0.204398] irq: Cannot allocate irq_descs @ IRQ48, assuming pre-allocated
    [    0.204557] irq: Cannot allocate irq_descs @ IRQ80, assuming pre-allocated
    [    0.204865] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
    [    0.204873] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
    [    0.204878] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
    [    0.204883] pci_bus 0000:00: root bus resource [bus 00-ff]
    [    0.205081] PCI: bus0: Fast back to back transfers disabled
    [    0.205087] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [    0.205094] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [    0.205147] PCI: bus1: Fast back to back transfers enabled
    [    0.205205] PCI: bus2: Fast back to back transfers enabled
    [    0.205227] pci 0000:00:02.0: PCI bridge to [bus 01]
    [    0.205235] pci 0000:00:03.0: PCI bridge to [bus 02]
    [    0.205319] mv_xor f1060800.xor: Marvell shared XOR driver
    [    0.240922] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
    [    0.280920] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
    [    0.280980] mv_xor f1060900.xor: Marvell shared XOR driver
    [    0.320931] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
    [    0.360921] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
    [    0.361040] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
    [    0.361326] console [ttyS0] disabled
    [    0.381355] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 15625000) is a 16550A
    [    0.965181] console [ttyS0] enabled
    [    0.988835] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 15625000) is a 16550A
    [    0.998710] libphy: Fixed MDIO Bus: probed
    [    1.002938] libphy: orion_mdio_bus: probed
    [    1.008077] mvneta f1030000.ethernet eth0: Using hardware mac address 00:50:43:11:03:0d
    [    1.016851] mvneta f1034000.ethernet eth1: Using random mac address fa:fb:df:f9:5e:cc
    [    1.025385] mvneta f1070000.ethernet eth2: Using hardware mac address 00:50:43:0b:03:0d
    [    1.033899] NET: Registered protocol family 10
    [    1.038792] NET: Registered protocol family 17
    [    1.043270] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
    [    1.055917] 8021q: 802.1Q VLAN Support v1.8
    [    1.060127] Registering SWP/SWPB emulation handler
    [    1.065542] hctosys: unable to open rtc device (rtc0)
    [    1.073694] Freeing unused kernel memory: 4592K (c0496000 - c0912000)
    [    1.084136] init: Console is alive
    [    1.092498] usbcore: registered new interface driver usbfs
    [    1.098025] usbcore: registered new interface driver hub
    [    1.103400] usbcore: registered new device driver usb
    [    1.110084] SCSI subsystem initialized
    [    1.114896] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.121693] ehci-platform: EHCI generic platform driver
    [    1.127263] ehci-orion: EHCI orion driver
    [    1.131413] orion-ehci f1058000.usb: EHCI Host Controller
    [    1.136834] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
    [    1.144492] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000
    [    1.160910] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
    [    1.167093] hub 1-0:1.0: USB hub found
    [    1.170862] hub 1-0:1.0: 1 port detected
    [    1.179139] xhci-hcd f10f0000.usb3: xHCI Host Controller
    [    1.184488] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
    [    1.192080] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
    [    1.200644] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
    [    1.206652] hub 2-0:1.0: USB hub found
    [    1.210421] hub 2-0:1.0: 1 port detected
    [    1.214450] xhci-hcd f10f0000.usb3: xHCI Host Controller
    [    1.219779] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
    [    1.227335] usb usb3: We dont know the algorithms for LPM for this host, disabling LPM.
    [    1.235651] hub 3-0:1.0: USB hub found
    [    1.239417] hub 3-0:1.0: 1 port detected
    [    1.243492] xhci-hcd f10f8000.usb3: xHCI Host Controller
    [    1.248823] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
    [    1.256412] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
    [    1.264975] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
    [    1.270975] hub 4-0:1.0: USB hub found
    [    1.274743] hub 4-0:1.0: 1 port detected
    [    1.278759] xhci-hcd f10f8000.usb3: xHCI Host Controller
    [    1.284092] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
    [    1.291620] usb usb5: We dont know the algorithms for LPM for this host, disabling LPM.
    [    1.299925] hub 5-0:1.0: USB hub found
    [    1.303697] hub 5-0:1.0: 1 port detected
    [    1.308557] usbcore: registered new interface driver usb-storage
    [    2.087795] init: - preinit -
    Press the [f] key and hit [enter] to enter failsafe mode
    Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
    [    5.131673] procd: - early -
    [    5.706452] procd: - ubus -
    [    6.710759] random: ubusd urandom read with 0 bits of entropy available
    [    6.717649] procd: - init -
    Please press Enter to activate this console.
    [    6.863841] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [    6.871496] i2c /dev entries driver
    [    6.876831] ip_tables: (C) 2000-2006 Netfilter Core Team
    [    6.884031] nf_conntrack version 0.5.0 (16162 buckets, 64648 max)
    [    7.074295] xt_time: kernel timezone is -0000
    [    7.091235] PPP generic driver version 2.4.2
    [    7.095849] NET: Registered protocol family 24
    [    8.723584] device eth0 entered promiscuous mode
    [    8.728953] br-lan: port 1(eth0) entered forwarding state
    [    8.734388] br-lan: port 1(eth0) entered forwarding state
    [    8.751499] device eth1 entered promiscuous mode
    [    8.756174] br-lan: port 2(eth1) entered forwarding state
    [    8.761615] br-lan: port 2(eth1) entered forwarding state
    [    8.781126] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
    [    9.720913] br-lan: port 1(eth0) entered disabled state
    [    9.726221] br-lan: port 2(eth1) entered disabled state
    [   10.730912] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
    [   10.738772] br-lan: port 1(eth0) entered forwarding state
    [   10.744197] br-lan: port 1(eth0) entered forwarding state
    [   10.750020] mvneta f1034000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
    [   10.757942] br-lan: port 2(eth1) entered forwarding state
    [   10.763366] br-lan: port 2(eth1) entered forwarding state
    [   12.740888] br-lan: port 1(eth0) entered forwarding state
    [   12.760887] br-lan: port 2(eth1) entered forwarding state
 
 
    BusyBox v1.24.1 () built-in shell (ash)
 
      _______                     ________        __
     |       |.-----.-----.-----.|  |  |  |.----.|  |_
     |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
     |_______||   __|_____|__|__||________||__|  |____|
              |__| W I R E L E S S   F R E E D O M
     -----------------------------------------------------
     DESIGNATED DRIVER (Bleeding Edge, r48735)
     -----------------------------------------------------
      * 2 oz. Orange Juice         Combine all juices in a
      * 2 oz. Pineapple Juice      tall glass filled with
      * 2 oz. Grapefruit Juice     ice, stir well.
      * 2 oz. Cranberry Juice
     -----------------------------------------------------
    root@OpenWrt:/#

r49395 (Compiled 2018.01.27 | Xue Liu’s OpenWrt Repo)

   Marvell>> tftpboot openwrt-mvebu-armada-388-clearfog-initramfs
   Using egiga1 device
   TFTP from server 10.4.50.38; our IP address is 10.4.50.170
   Filename 'openwrt-mvebu-armada-388-clearfog-initramfs'.
   Load address: 0x2000000
   Loading: #################################################################
   	  #################################################################
   	  #################################################################
   	  2.4 MiB/s
   done
   Bytes transferred = 3920894 (3bd3fe hex)
   Marvell>> bootm
   ## Booting kernel from Legacy Image at 02000000 ...
      Image Name:   ARM OpenWrt Linux-4.1.23
      Created:      2016-06-30   5:39:05 UTC
      Image Type:   ARM Linux Kernel Image (uncompressed)
      Data Size:    3920830 Bytes = 3.7 MiB
      Load Address: 00008000
      Entry Point:  00008000
      Verifying Checksum ... OK
      Loading Kernel Image ... OK
   OK
 
   Starting kernel ...
 
   [    0.000000] Booting Linux on physical CPU 0x0
   [    0.000000] Linux version 4.1.23 (jw@u17) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 r49395) ) #2 SMP Sat Jan 27 05:52:51 UTC 2018
   [    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
   [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
   [    0.000000] Machine model: SolidRun Clearfog A1
   [    0.000000] Memory policy: Data cache writealloc
   [    0.000000] PERCPU: Embedded 10 pages/cpu @eefd1000 s11776 r8192 d20992 u40960
   [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
   [    0.000000] Kernel command line: 
   [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
   [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
   [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
   [    0.000000] Memory: 1026868K/1048576K available (3435K kernel code, 138K rwdata, 1228K rodata, 7544K init, 168K bss, 21708K reserved, 0K cma-reserved, 270336K highmem)
   [    0.000000] Virtual kernel memory layout:
   [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
   [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
   [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
   [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
   [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
   [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
   [    0.000000]       .text : 0xc0008000 - 0xc0495e9c   (4664 kB)
   [    0.000000]       .init : 0xc0496000 - 0xc0bf4000   (7544 kB)
   [    0.000000]       .data : 0xc0bf4000 - 0xc0c1694c   ( 139 kB)
   [    0.000000]        .bss : 0xc0c1694c - 0xc0c40a24   ( 169 kB)
   [    0.000000] Hierarchical RCU implementation.
   [    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
   [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
   [    0.000000] NR_IRQS:16 nr_irqs:16 16
   [    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
   [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
   [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
   [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
   [    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
   [    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x46070001
   [    0.000006] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
   [    0.000016] clocksource armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
   [    0.000156] Calibrating delay loop... 3188.32 BogoMIPS (lpj=15941632)
   [    0.059921] pid_max: default: 32768 minimum: 301
   [    0.059975] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
   [    0.059980] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
   [    0.060187] CPU: Testing write buffer coherency: ok
   [    0.060287] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
   [    0.060312] Setting up static identity map for 0x8280 - 0x82d8
   [    0.060399] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0x4
   [    0.060486] mvebu-pmsu: Initializing Power Management Service Unit
   [    0.060919] Booting CPU 1
   [    0.119939] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
   [    0.119968] Brought up 2 CPUs
   [    0.119974] SMP: Total of 2 processors activated (6384.02 BogoMIPS).
   [    0.119977] CPU: All CPU(s) started in SVC mode.
   [    0.121712] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
   [    0.121790] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
   [    0.121823] pinctrl core: initialized pinctrl subsystem
   [    0.122159] NET: Registered protocol family 16
   [    0.122595] DMA: preallocated 256 KiB pool for atomic coherent allocations
   [    0.149921] cpuidle: using governor ladder
   [    0.152478] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
   [    0.152487] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling[    0.180937] Switched to clocksource armada_370_xp_clocksource
   [    0.181394] NET: Registered protocol family 2
   [    0.181808] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
   [    0.181846] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
   [    0.181909] TCP: Hash tables configured (established 8192 bind 8192)
   [    0.181945] UDP hash table entries: 512 (order: 2, 16384 bytes)
   [    0.181969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
   [    0.182064] NET: Registered protocol family 1
   [    0.211472] futex hash table entries: 512 (order: 3, 32768 bytes)
   [    0.211907] squashfs: version 4.0 (2009/01/31) Phillip Lougher
   [    0.211916] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
   [    0.212261] bounce: pool size: 64 pages
   [    0.212269] io scheduler noop registered
   [    0.212276] io scheduler deadline registered (default)
   [    0.212708] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
   [    0.213051] irq: Cannot allocate irq_descs @ IRQ48, assuming pre-allocated
   [    0.213206] irq: Cannot allocate irq_descs @ IRQ80, assuming pre-allocated
   [    0.213509] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
   [    0.213517] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
   [    0.213525] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
   [    0.213531] pci_bus 0000:00: root bus resource [bus 00-ff]
   [    0.213721] PCI: bus0: Fast back to back transfers disabled
   [    0.213728] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
   [    0.213734] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
   [    0.213786] PCI: bus1: Fast back to back transfers enabled
   [    0.213847] PCI: bus2: Fast back to back transfers enabled
   [    0.213868] pci 0000:00:02.0: PCI bridge to [bus 01]
   [    0.213876] pci 0000:00:03.0: PCI bridge to [bus 02]
   [    0.213955] mv_xor f1060800.xor: Marvell shared XOR driver
   [    0.251038] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
   [    0.290970] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
   [    0.291030] mv_xor f1060900.xor: Marvell shared XOR driver
   [    0.330964] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
   [    0.370964] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
   [    0.371073] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
   [    0.371364] console [ttyS0] disabled
   [    0.391394] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 15625000) is a 16550A
   [    0.974982] console [ttyS0] enabled
   [    0.998634] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 15625000) is a 16550A
   [    1.008502] libphy: Fixed MDIO Bus: probed
   [    1.012730] libphy: orion_mdio_bus: probed
   [    1.017876] mvneta f1030000.ethernet eth0: Using hardware mac address 00:50:43:5a:07:04
   [    1.026640] mvneta f1034000.ethernet eth1: Using random mac address d6:15:0c:61:68:d9
   [    1.035175] mvneta f1070000.ethernet eth2: Using hardware mac address 00:50:43:0a:07:04
   [    1.043675] NET: Registered protocol family 10
   [    1.048569] NET: Registered protocol family 17
   [    1.053061] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
   [    1.065708] 8021q: 802.1Q VLAN Support v1.8
   [    1.069920] Registering SWP/SWPB emulation handler
   [    1.075317] hctosys: unable to open rtc device (rtc0)
   [    1.084968] Freeing unused kernel memory: 7544K (c0496000 - c0bf4000)
   [    1.095444] init: Console is alive
   [    1.105049] usbcore: registered new interface driver usbfs
   [    1.110581] usbcore: registered new interface driver hub
   [    1.115954] usbcore: registered new device driver usb
   [    1.126902] SCSI subsystem initialized
   [    1.131749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
   [    1.138544] ehci-platform: EHCI generic platform driver
   [    1.144141] ehci-orion: EHCI orion driver
   [    1.148257] orion-ehci f1058000.usb: EHCI Host Controller
   [    1.153689] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
   [    1.161343] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000
   [    1.180940] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
   [    1.187137] hub 1-0:1.0: USB hub found
   [    1.190909] hub 1-0:1.0: 1 port detected
   [    1.199341] xhci-hcd f10f0000.usb3: xHCI Host Controller
   [    1.204699] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
   [    1.212291] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
   [    1.220854] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
   [    1.226864] hub 2-0:1.0: USB hub found
   [    1.230634] hub 2-0:1.0: 1 port detected
   [    1.234670] xhci-hcd f10f0000.usb3: xHCI Host Controller
   [    1.239997] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
   [    1.247530] usb usb3: We dont know the algorithms for LPM for this host, disabling LPM.
   [    1.255845] hub 3-0:1.0: USB hub found
   [    1.259613] hub 3-0:1.0: 1 port detected
   [    1.263710] xhci-hcd f10f8000.usb3: xHCI Host Controller
   [    1.269041] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
   [    1.276630] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
   [    1.285195] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
   [    1.291190] hub 4-0:1.0: USB hub found
   [    1.294958] hub 4-0:1.0: 1 port detected
   [    1.298974] xhci-hcd f10f8000.usb3: xHCI Host Controller
   [    1.304309] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
   [    1.311842] usb usb5: We dont know the algorithms for LPM for this host, disabling LPM.
   [    1.320147] hub 5-0:1.0: USB hub found
   [    1.323921] hub 5-0:1.0: 1 port detected
   [    1.329839] sdhci: Secure Digital Host Controller Interface driver
   [    1.336054] sdhci: Copyright(c) Pierre Ossman
   [    1.340684] sdhci-pltfm: SDHCI platform and OF driver helper
   [    1.347178] usbcore: registered new interface driver usb-storage
   [    1.360572] init: - preinit -
   Press the [f] key and hit [enter] to enter failsafe mode
   Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
   [    4.406424] procd: - early -
   [    4.965685] procd: - ubus -
   [    5.019086] random: ubusd urandom read with 0 bits of entropy available
   [    5.025976] procd: - init -
   Please press Enter to activate this console.
   [    5.196134] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
   [    5.207844] ip6_tables: (C) 2000-2006 Netfilter Core Team
   [    5.215742] i2c /dev entries driver
   [    5.221208] ip_tables: (C) 2000-2006 Netfilter Core Team
   [    5.228628] nf_conntrack version 0.5.0 (16162 buckets, 64648 max)
   [    5.414558] xt_time: kernel timezone is -0000
   [    5.431616] PPP generic driver version 2.4.2
   [    5.436259] NET: Registered protocol family 24
   [    7.114973] device eth0 entered promiscuous mode
   [    7.122099] br-lan: port 1(eth0) entered forwarding state
   [    7.127527] br-lan: port 1(eth0) entered forwarding state
   [    7.148077] device eth1 entered promiscuous mode
   [    7.152853] br-lan: port 2(eth1) entered forwarding state
   [    7.158270] br-lan: port 2(eth1) entered forwarding state
   [    7.173015] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
   [    8.110954] br-lan: port 1(eth0) entered disabled state
   [    8.116262] br-lan: port 2(eth1) entered disabled state
   [    9.120956] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
   [    9.128814] br-lan: port 1(eth0) entered forwarding state
   [    9.134240] br-lan: port 1(eth0) entered forwarding state
   [    9.140957] mvneta f1034000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
   [    9.148813] br-lan: port 2(eth1) entered forwarding state
   [    9.154235] br-lan: port 2(eth1) entered forwarding state
   [   11.130932] br-lan: port 1(eth0) entered forwarding state
   [   11.150930] br-lan: port 2(eth1) entered forwarding state
 
   BusyBox v1.24.2 () built-in shell (ash)
   Enter 'help' for a list of built-in commands.
      _______                     ________        __
    |       |.-----.-----.-----.|  |  |  |.----.|  |_
    |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
    |_______||   __|_____|__|__||________||__|  |____|
             |__| W I R E L E S S   F R E E D O M
    -----------------------------------------------------
    DESIGNATED DRIVER (Bleeding Edge, r49395)
    -----------------------------------------------------
     * 2 oz. Orange Juice         Combine all juices in a
     * 2 oz. Pineapple Juice      tall glass filled with
     * 2 oz. Grapefruit Juice     ice, stir well.
     * 2 oz. Cranberry Juice
    -----------------------------------------------------
   root@OpenWrt:/#
29.01.20181311Base systemBug ReportVery LowHighprocd: mount /tmp with zramTrunkNew Task Description

Supply the following if possible:
- Device problem occurs on all device
- Software versions of OpenWrt/LEDE: Trunk

If i select this option in menuconfig, At the boot procd mount the wrong size of ram. I have 512mb of ram and procd mount only 11mb of ram. More detail here.
http://lists.infradead.org/pipermail/lede-dev/2018-January/011008.html

https://forum.lede-project.org/t/no-space-left-in-tmp/11000/14


31.01.20181316Base systemBug ReportVery LowLowkernel, serial line, pl2303 changes breaks ntpd with RA...TrunkUnconfirmed Task Description

kernel time, pl2303, serial line kenel module

Device and Software:

TP-Link 4300v1
OpenWRT 17.01.4, r3560-79f57e422d
Component: kernel, serial line, pl2303

Setup:

ntpd V4.2.6p5 and V4.2.8p10(cross compiled with clock RAWDCF)
reference clock
  server 127.127.8.0-3 mode 5
  RAW DCF77 100/200ms pulses
pl2303 usb to serial adapter (/dev/ttyUSB0)
=> set to 50 Baud by ntpd when opening
DCF77 reciever connected per serial line to pl2303
=> No problem with V12.09 with Attitude Adjustment
   Time decode with dcfd and ntpd works absolutely reliable.
The 100ms/200ms pulses send from the DCF77 reciever code bits "0" and "1".
The length of the signal on the serial RX line is decoded by the ntpd.
One bit per second is send. After 60 seconds the telegram is decoded to the actual time and date.  
 => The puls length hat to be acurately "send" through the pl2303 to the kernel serial line driver into ntpd.

Problem:

Since V15, and also on the latest V17.01.4 the dcfd and ntpd could not decode the dcf telegram.
There always "1" decoded, or the transmission is invalid, due to inconsitency "flapping" bits

Suggestions:

Suspect some changes in the Linux kernel which effects the timne measurement 
or inside the pl2303 driver, so the bits are not corretly decoded (100ms/200ms).

Reproduce/Debug:

I'm able to test new kernel and driver modules on my test environmet
perhaps "setserial" (can't fint it anywhere) can set some serial line parameters

Working well on TP-Link 4300, V12.09:

root@funk:~# ntpq -p
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
*GENERIC(0)      .DCFa.           0 l   24   64  377    0.000   -0.236   0.430
 funk.koelle.... .INIT.          16 u    - 1024    0    0.000    0.000   0.000
+ntps1-0.eecsit. .PPS.            1 u   52   64  177   28.454   -0.638   2.367
+ptbtime2.ptb.de .PTB.            1 u   20   64  377   19.201   -0.495   2.739
+rustime01.rus.u .PZF.            1 u   26   64  377   18.828   -1.042   2.059
+ntp2.rrze.uni-e .GPS.            1 u   32   64  377   19.264   -0.737   2.068
-ntp2.belwue.de  .PZF.            1 u   43   64  377   21.406   -1.818   1.428
-ts-1.rz.rwth-aa .GPS.            1 u   13   64  377   18.941   -1.521   0.810
 LOCAL(0)        .LOCL.          10 l   4d   64    0    0.000    0.000   0.000

root@funk:~# ntpq -c clockv
associd=0 status=00e0 , 14 events, clk_unspec,
device="RAW DCF77 CODE (Conrad DCF77 receiver module)",
timecode="-####--#-#-###----M-S1-4-1--P-----2P1---1212-1-------81---p",
poll=5549, noreply=0, badformat=0, baddata=7, fudgetime1=191.700,
stratum=0, refid=DCFa, flags=0,
refclock_time="de1c9459.00000000  Wed, Jan 31 2018 19:15:37.000",
refclock_status="TIME CODE; (LEAP INDICATION; ANTENNA)",
refclock_format="RAW DCF77 Timecode",
refclock_states="*NOMINAL: 4d+02:30:16 (99.85%); ILLEGAL DATE: 00:08:37 (0.14%); running time: 4d+02:38:53"

</code>

It would be verry nice if someone could have an insight into this problem.

Many thanks

Lars

01.02.20181317Base systemBug ReportVery LowHighom2p-lc sysupgrade fails silentlyTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on Openmesh om2p-lc
- Software versions of OpenWrt/LEDE release, packages, etc.
LEDE Reboot SNAPSHOT r5360-a8a23ca

- Steps to reproduce
sysupgrade -n /tmp/lede-ar71xx-generic-om2p-squashfs-sysupgrade.bin
Sysupgrade appears to go through the motions but firmware doesn’t upgrade and doesn’t delete config files with the -n switch.
I’ve tried the factory and the sysupgrade file with the same results. This build upgrades as expedted with a tl-mr3420-v2 and tl-wr740n-v4.

Not sure if it’s related but the om-watchdog init script also fails to detect the board type so doesn’t start.
Changing this line in the /etc/init.d/om-watchdog init script gets the watchdog to start which make me think it’s an identification issue.
local board=$(ar71xx_board_name)
change to
local board=$(cat /tmp/sysinfo/board_name)

 


05.02.20181328Base systemBug ReportVery LowLowVGV7510KW22 / o2 Box 6431: Spurious reboots and etherne...TrunkUnconfirmed Task Description

Device:
VGV7510KW22 / o2 Box 6431

Software version:
OpenWrt SNAPSHOT r5944-ad4232e
Linux version 4.9.77 (buildbot@slashdirt-03) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r5944-ad4232e) ) #0 SMP Thu Jan 25 10:00:48 2018

Environment:
Additional packages: asterisk13-chan-lantiq, strongswan

Steps to reproduce:
From time to time, the box will reboot spuriously. Uptimes vary, between 12 hours and 2 weeks. After such a reboot, some of the ethernet ports do not detect a link anymore. Unplugging and replugging the ethernet cable into the same port does not help, and the kernel will only notice a link if I plug the ethernet cable into another port.
Sometimes, the ethernet port loses link even without a reboot.
Syslog is logged to an external server via UDP and does not show any error message prior to the spurious reboot.

Workaround:
Performing a manual reboot after the spurious reboot fixes the ethernet link loss.

Possibly relevant difference between dmesg on a spurious and normal reboot:

--- dmesg-normal-reboot.txt.notimestamps        2018-02-05 11:42:10.656203272 +0100
+++ dmesg-spurious-reboot.txt.notimestamps      2018-02-05 11:40:47.264201277 +0100
@@ -30,8 +30,8 @@
 PID hash table entries: 256 (order: -2, 1024 bytes)
 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
 Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
-Writing ErrCtl register=00014098
-Readback ErrCtl register=00014098
+Writing ErrCtl register=00014090
+Readback ErrCtl register=00014090
 Memory: 55392K/63488K available (4334K kernel code, 178K rwdata, 1324K rodata, 1252K init, 244K bss, 8096K reserved, 0K cma-reserved)
 SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
@@ -123,12 +123,14 @@
 libphy: Fixed MDIO Bus: probed
 libphy: lantiq,xrx200-mdio: probed
 ICPlus IP101A/G 0:01: attached PHY driver [ICPlus IP101A/G] (mii_bus:phy_addr=0:01, irq=-1)
-Intel XWAY PHY22F (xRX integrated) 0:11: attached PHY driver [Intel XWAY PHY22F (xRX integrated)] (mii_bus:phy_addr=0:11, irq=-1)
-Intel XWAY PHY22F (xRX integrated) 0:12: attached PHY driver [Intel XWAY PHY22F (xRX integrated)] (mii_bus:phy_addr=0:12, irq=-1)
-random: fast init done
+lantiq,xrx200-net 1e108000.eth eth0 (uninitialized): no PHY found
+xrx200-mdio: probing phy of port 2 failed
+lantiq,xrx200-net 1e108000.eth eth0 (uninitialized): no PHY found
+xrx200-mdio: probing phy of port 3 failed
 Intel XWAY PHY22F (xRX integrated) 0:13: attached PHY driver [Intel XWAY PHY22F (xRX integrated)] (mii_bus:phy_addr=0:13, irq=-1)
+random: fast init done
 Intel XWAY PHY22F (xRX integrated) 0:14: attached PHY driver [Intel XWAY PHY22F (xRX integrated)] (mii_bus:phy_addr=0:14, irq=-1)
-ltq-cputemp cputemp@0: Current CPU die temperature: 54.0 °C
+ltq-cputemp cputemp@0: Current CPU die temperature: 52.5 °C
 wdt 1f8803f0.watchdog: Init done
 NET: Registered protocol family 10
 NET: Registered protocol family 17
@@ -139,7 +141,6 @@
 This architecture does not have kernel memory protection.
 init: Console is alive
 init: - watchdog -
-lantiq,xrx200-net 1e108000.eth eth0: port 2 got link
 kmodloader: loading kernel modules from /etc/modules-boot.d/*
 dwc2 1e101000.ifxhcd: requested GPIO 509
 dwc2 1e101000.ifxhcd: DWC OTG Controller
@@ -151,12 +152,12 @@
 hub 1-0:1.0: 1 port detected
 kmodloader: done loading kernel modules from /etc/modules-boot.d/*
 init: - preinit -
-jffs2: notice: (440) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
+IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
+jffs2: notice: (436) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
 mount_root: switching to jffs2 overlay
 urandom-seed: Seeding with /etc/urandom.seed
 procd: - early -
 procd: - watchdog -
-lantiq,xrx200-net 1e108000.eth eth0: port 2 lost link
 procd: - watchdog -
 procd: - ubus -
 procd: - init -
@@ -207,19 +208,19 @@
 device eth0 entered promiscuous mode
 IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
 IPv6: ADDRCONF(NETDEV_UP): eth0.13: link is not ready
-lantiq,xrx200-net 1e108000.eth eth0: port 2 got link
-IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
-br-lan: port 1(eth0.1) entered blocking state
-br-lan: port 1(eth0.1) entered forwarding state
-IPv6: ADDRCONF(NETDEV_CHANGE): eth0.13: link becomes ready
-IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
+random: crng init done
 PTM 1.0.27    PTM (E1) firmware version 0.30
 ifxmips_ptm: PTM init succeed
 IPv6: ADDRCONF(NETDEV_UP): dsl0: link is not ready
 IPv6: ADDRCONF(NETDEV_UP): dsl0.7: link is not ready
-random: crng init done
 enter showtime
 IPv6: ADDRCONF(NETDEV_CHANGE): dsl0: link becomes ready
 IPv6: ADDRCONF(NETDEV_CHANGE): dsl0.7: link becomes ready
 enter showtime
 pppoe-wan: renamed from ppp0
09.02.20181338Base systemBug ReportVery LowLowcron silently fails to startTrunkUnconfirmed Task Description

I’m running HEAD (9a08c10 BUILD_ID=”r5968+31-bcd17ce”) on an x86_64. I’ve enabled:

CONFIG_BUSYBOX_CONFIG_CROND=y
CONFIG_BUSYBOX_CONFIG_CRONTAB=y

and I’ve validated that

/etc/init.d/cron enable

and then tried to run it:

root@OpenWrt3:~# /etc/init.d/cron enable
root@OpenWrt3:~# /etc/init.d/cron start
root@OpenWrt3:~# echo $?
0
root@OpenWrt3:~# ps -w | grep cron
14918 root      3088 S    grep cron
root@OpenWrt3:~# grep cron /var/log/messages
root@OpenWrt3:~# 
10.02.20181345Base systemBug ReportVery LowLowFailed to build u-boot/atmelimage.o in Alpine LinuxTrunkUnconfirmed Task Description

Failed to build u-boot/atmelimage.o in Alpine Linux

tools/mkimage.h: In function 'map_to_sysmem':                                                                                                           
tools/mkimage.h:40:10: error: 'ulong' undeclared (first use in this function)                                                                           
  return (ulong)(uintptr_t)ptr;                                                                                                                         
          ^~~~~                                                                                                                                         
tools/mkimage.h:40:10: note: each undeclared identifier is reported only once for each function it appears in                                           
tools/mkimage.h:40:17: error: expected expression before 'uintptr_t'                                                                                    
  return (ulong)(uintptr_t)ptr;                                                                                                                         
                 ^~~~~~~~~                                                                                                                              
tools/mkimage.h:40:27: error: expected ';' before 'ptr'                                                                                                 
  return (ulong)(uintptr_t)ptr;                                                                                                                         
                           ^~~                                                                                                                          
make[5]: *** [scripts/Makefile.host:134: tools/atmelimage.o] Error 1                                                                                    
make[4]: *** [Makefile:1195: tools-only] Error 2
11.02.20181347Base systemBug ReportVery LowHighAsus WL500GP V2 reboots when you`re trying to send fileAllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

I`m using Asus WL500GP V2 with Huawei E3372s with HiLink fw (I tested stick fw too). I`ve tried all LEDE versions. You can reproduce easily, just try to attach file to letter, or send file to cloud. 99% that router will reboot.

Showing tasks 101 - 150 of 1117 Page 3 of 23 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing