OpenWrt/LEDE Project

Welcome to the OpenWrt Project bug reporting and issue tracking system

Problems to be reported here are for the current OpenWrt and legacy LEDE Project’s targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to openwrt-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeveritySummaryReported InStatus  desc
03.09.2017998PackagesBug ReportLowLowpackages: "make packages/X/check" should print warnings...TrunkNew Task Description

Currently, when running “make check” on a single package, it does not print any warning. V=s is needed to see the warnings. The build system should print the warnings in all cases, because that’s what the user asks for!

To reproduce:

$ make package/nlbwmon/check 
 make[1] package/nlbwmon/check
 make[2] -C feeds/packages/net/nlbwmon check
$ make package/nlbwmon/check V=s
make[1]: Entering directory '/tmp/lede'
make[2]: Entering directory '/tmp/lede/feeds/packages/net/nlbwmon'
WARNING: nlbwmon-2017-08-02-32fc0925.tar.xz is missing, please run make download before re-running this check
make[2]: Leaving directory '/tmp/lede/feeds/packages/net/nlbwmon'
make[1]: Leaving directory '/tmp/lede'

The main target make check (without specifying any package) works fine, because it seems to run in verbose mode by default:

$ make check
make[3]: Entering directory '/tmp/lede/tools/gmp'
make[3]: Leaving directory '/tmp/lede/tools/gmp'
...
make[3]: Entering directory '/tmp/lede/package/network/utils/iwinfo'
WARNING: PKG_MIRROR_HASH is missing, set to 7bd294f50f8ec8c0497c5fbe5527f3ae098814cdfeecf4ccf78a2a8937611664
make[3]: Leaving directory '/tmp/lede/package/network/utils/iwinfo'
...

I tried to fix the issue myself but this is way above my understanding of make.

18.11.20171177Base systemBug ReportVery LowMediumdnsmasq spams syslog on loss of WAN connectionTrunkNew Task Description

Supply the following if possible:
- Device problem occurs on

Observed on an APU2

- Software versions of LEDE release, packages, etc.

DISTRIB_ID='LEDE'
DISTRIB_RELEASE='SNAPSHOT'
DISTRIB_REVISION='r5244-f0c37f6ceb'
DISTRIB_CODENAME='reboot'
DISTRIB_TARGET='x86/64'
DISTRIB_ARCH='x86_64'
DISTRIB_DESCRIPTION='LEDE Reboot SNAPSHOT r5244-f0c37f6ceb'
DISTRIB_TAINTS='no-all busybox'

# opkg list_installed | grep dnsmasq
dnsmasq - 2.78-2

- Steps to reproduce

In my case, I have an upstream service provisioned with pppoe. Occasionally, the pppoe session dies as the ISP does some kind of unannounced maintenance. Since updating recently from a March 2016 build of OpenWrt, when this outage occurs, dnsmasq sends many messages, like this:

Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied

nearly 30 per second.

29.01.20181311Base systemBug ReportVery LowHighprocd: mount /tmp with zramTrunkNew Task Description

Supply the following if possible:
- Device problem occurs on all device
- Software versions of OpenWrt/LEDE: Trunk

If i select this option in menuconfig, At the boot procd mount the wrong size of ram. I have 512mb of ram and procd mount only 11mb of ram. More detail here.
http://lists.infradead.org/pipermail/lede-dev/2018-January/011008.html

https://forum.lede-project.org/t/no-space-left-in-tmp/11000/14


17.07.20181664Base systemBug ReportVery LowHighUnable to use wan port (dhcp or static ip is not workin...AllNew Task Description

Device: Belkin F9K1115 v2
Software version: OpenWrt 18.06.0-rc1, LEDE after r3466-f6907dc

Unable to use wan port on any new software version (last known working LEDE version is r3466-f6907dc).
DHCP is not getting ip address. After setting up static ip address there is no network communication.

07.09.20181837Base systemBug ReportMediumMediumKernel oops when using wireguard and mangle/fwmarkopenwrt-19.07New Task Description

On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Ethernet interface being the head-unit connected to a VLAN switch.

Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664463] INFO: rcu_sched self-detected stall on CPU
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664907] 	1-...: (5999 ticks this GP) idle=9ee/140000000000001/0 softirq=961867/961867 fqs=2711
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.665571] 	 (t=6000 jiffies g=358062 c=358061 q=4475)
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.665986] NMI backtrace for cpu 1
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666301] CPU: 1 PID: 14102 Comm: kworker/1:0 Not tainted 4.14.63 #0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666775] Hardware name: XXXXXXXXXX
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667240] Workqueue: wg-crypt-XXXXX 0xffffffffa01dbab0 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667891] Call Trace:
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668145]  <IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668372]  0xffffffff8159c6d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668662]  0xffffffff815a0000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668950]  ? 0xffffffff810418d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669251]  0xffffffff815a0060
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669544]  0xffffffff81041924
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669836]  0xffffffff810c22e3
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670128]  0xffffffff810c176f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670421]  ? 0xffffffff8109fe35
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670720]  ? 0xffffffff810a0062
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671020]  0xffffffff810c432a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671309]  0xffffffff810d0f5e
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671599]  0xffffffff810c4c4f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671892]  0xffffffff810c4df6
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672182]  0xffffffff81602392
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672473]  0xffffffff81601a61
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672760]  </IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672994] RIP: 0010:0xffffffff814e7682
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673327] RSP: 0018:ffffc90000cb3a30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673912] RAX: 00000000000001f8 RBX: ffffc90000cb3af8 RCX: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674426] RDX: ffff880077923e00 RSI: 00000000deb48eb9 RDI: ffff88007aa28e68
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674944] RBP: ffffc90000cb3a80 R08: 0000000000000000 R09: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675456] R10: ffff88007aa28e00 R11: 0000000000000001 R12: ffff880077923e00
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675966] R13: ffffc90000cb3a90 R14: ffff8800786e3a00 R15: ffff88007a360000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676484]  0xffffffff814e7a0a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676773]  0xffffffff814e7d89
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677065]  0xffffffff81532536
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677359]  0xffffffffa01800a7 [iptable_mangle@ffffffffa0180000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677845]  0xffffffff814e2966
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678137]  0xffffffff814ed868
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678430]  ? 0xffffffff814ebed0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678725]  0xffffffff814ed897
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679014]  0xffffffff8152b6bb
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679309]  0xffffffffa002145e [udp_tunnel@ffffffffa0021000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679786]  0xffffffffa01ddf81 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680256]  ? 0xffffffff811038aa
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680555]  ? 0xffffffff810c5454
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680854]  0xffffffffa01dbb5a [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681321]  0xffffffff81091cf4
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681613]  0xffffffff8109204b
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681903]  0xffffffff81096d42
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682191]  ? 0xffffffff81091e40
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682487]  ? 0xffffffff81096c30
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682788]  0xffffffff816001ef

Bootlog:

[    0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Wed Aug 15 20:42:39 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f1b2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f1b3000-0x000000007f1fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f1fb000-0x000000007f314fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f315000-0x000000007f324fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f325000-0x000000007f33bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f344000-0x000000007f358fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f359000-0x000000007f359fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f35a000-0x000000007f377fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f378000-0x000000007f37bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f37c000-0x000000007f38afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f38b000-0x000000007f39bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39c000-0x000000007f39dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f39e000-0x000000007f39efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39f000-0x000000007f3ccfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f3cd000-0x000000007f40ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f410000-0x000000007f58efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f6e5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f6e6000-0x000000007f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Medion E1230/E1230, BIOS 208 02/10/2012
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 write-through
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffffffffff400d10]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[    0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[    0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[    0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[    0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[    0.000000] BRK [0x01e0c000, 0x01e0cfff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MEDION)
[    0.000000] ACPI: XSDT 0x000000007F315070 00005C (v01 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007F3236E8 0000F4 (v04 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007F315158 00E58C (v02 MEDION MEDIONAG 00000001 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000007F390F80 000040
[    0.000000] ACPI: APIC 0x000000007F3237E0 000072 (v03 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: SLIC 0x000000007F323858 000176 (v01 MEDION MEDIONAG 00000001 MSFT 00000001)
[    0.000000] ACPI: ECDT 0x000000007F3239D0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x000000007F323A98 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007F323AD8 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x000000007F323B10 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6effff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f1b2fff]
[    0.000000]   node   0: [mem 0x000000007f410000-0x000000007f58efff]
[    0.000000]   node   0: [mem 0x000000007f6e6000-0x000000007f6effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[    0.000000] On node 0 totalpages: 520921
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 516924 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] random: get_random_bytes called from 0xffffffff81cb0b09 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff88007ee00000 s132056 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s132056 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 512744
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2032612K/2083684K available (8200K kernel code, 527K rwdata, 1312K rodata, 1052K init, 420K bss, 51072K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.040000] tsc: Unable to calibrate against PIT
[    0.040000] tsc: using HPET reference calibration
[    0.040000] tsc: Detected 1595.996 MHz processor
[    0.040000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=15959960)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] ACPI: Core revision 20170728
[    0.068326] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.070105] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.070601] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.071425] Disabled fast string operations
[    0.071787] mce: CPU supports 5 MCE banks
[    0.072125] process: using mwait in idle threads
[    0.072500] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.072914] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.073530] Freeing SMP alternatives memory: 28K
[    0.080265] smpboot: Max logical packages: 2
[    0.081106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.190000] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.190000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.190000] ... version:                3
[    0.190000] ... bit width:              40
[    0.190000] ... generic registers:      2
[    0.190000] ... value mask:             000000ffffffffff
[    0.190000] ... max period:             000000007fffffff
[    0.190000] ... fixed-purpose events:   3
[    0.190000] ... event mask:             0000000700000003
[    0.190000] Hierarchical SRCU implementation.
[    0.190000] smp: Bringing up secondary CPUs ...
[    0.190000] x86: Booting SMP configuration:
[    0.190000] .... node  #0, CPUs:      #1
[    0.010000] Disabled fast string operations
[    0.190000]  #2
[    0.010000] Disabled fast string operations
[    0.190386]  #3
[    0.010000] Disabled fast string operations
[    0.193013] smp: Brought up 1 node, 4 CPUs
[    0.193365] smpboot: Total of 4 processors activated (12767.96 BogoMIPS)
[    0.195434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196180] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.197097] NET: Registered protocol family 16
[    0.198390] cpuidle: using governor ladder
[    0.198390] ACPI: bus type PCI registered
[    0.198390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.200004] PCI: Using configuration type 1 for base access
[    0.217580] ACPI: Added _OSI(Module Device)
[    0.217940] ACPI: Added _OSI(Processor Device)
[    0.218293] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218673] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219086] ACPI: EC: EC started
[    0.219370] ACPI: EC: interrupt blocked
[    0.222270] ACPI: \: Used as first EC
[    0.222591] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.223021] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.223763] ACPI: Executed 1 blocks of module-level executable AML code
[    0.240673] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.242268] ACPI: Dynamic OEM Table Load:
[    0.242613] ACPI: SSDT 0xFFFF88007BD5D800 0002E9 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.246636] ACPI: Dynamic OEM Table Load:
[    0.247070] ACPI: SSDT 0xFFFF88007BC81000 0006DB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.254189] ACPI: Dynamic OEM Table Load:
[    0.256660] ACPI: SSDT 0xFFFF88007C6CB000 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.257695] ACPI: Dynamic OEM Table Load:
[    0.260047] ACPI: SSDT 0xFFFF88007C7DE540 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.264783] ACPI: Interpreter enabled
[    0.265199] ACPI: (supports S0 S5)
[    0.265579] ACPI: Using IOAPIC for interrupt routing
[    0.268058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270580] ACPI: GPE 0x02 active on init
[    0.272964] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.305839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305839] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[    0.305839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.306311] PCI host bridge to bus 0000:00
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.306311] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306721] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[    0.310006] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[    0.310006] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[    0.310006] pci 0000:00:02.0: reg 0x14: [io  0xf100-0xf107]
[    0.315634] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.315634] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[    0.315634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.315960] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.315960] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.316454] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.316454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.316867] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.316867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.317285] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.317285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.317706] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.317706] pci 0000:00:1d.0: reg 0x20: [io  0xf0a0-0xf0bf]
[    0.318128] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.318128] pci 0000:00:1d.1: reg 0x20: [io  0xf080-0xf09f]
[    0.318515] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.318515] pci 0000:00:1d.2: reg 0x20: [io  0xf060-0xf07f]
[    0.318938] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.318938] pci 0000:00:1d.3: reg 0x20: [io  0xf040-0xf05f]
[    0.319336] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.319336] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[    0.319336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.320072] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.320513] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.323112] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.323112] pci 0000:00:1f.2: reg 0x10: [io  0xf0f0-0xf0f7]
[    0.323112] pci 0000:00:1f.2: reg 0x14: [io  0xf0e0-0xf0e3]
[    0.323112] pci 0000:00:1f.2: reg 0x18: [io  0xf0d0-0xf0d7]
[    0.323112] pci 0000:00:1f.2: reg 0x1c: [io  0xf0c0-0xf0c3]
[    0.323112] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf02f]
[    0.323112] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[    0.323112] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.323324] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.324155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.324284] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[    0.324284] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x18: [mem 0xdfe11000-0xdfe11fff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x20: [mem 0xdfe10000-0xdfe10fff 64bit]
[    0.324284] pci 0000:02:00.0: supports D1
[    0.324284] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.324922] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.330068] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.330359] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.330469] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.330614] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[    0.332600] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[    0.333006] pci 0000:03:00.0: supports D1 D2
[    0.333011] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.333210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.333620] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.333630] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.333927] pci 0000:04:00.0: [8086:0896] type 00 class 0x028000
[    0.334057] pci 0000:04:00.0: reg 0x10: [mem 0xdfc00000-0xdfc01fff 64bit]
[    0.334763] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.334942] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.335350] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.335528] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.336039] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.336044] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336049] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336053] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.336057] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.336062] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.336066] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[    0.336070] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.336130] pci_bus 0000:00: on NUMA node 0
[    0.337515] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.338262] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.346039] ACPI: EC: interrupt unblocked
[    0.346039] ACPI: EC: event unblocked
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.348684] SCSI subsystem initialized
[    0.349211] libata version 3.00 loaded.
[    0.349211] ACPI: bus type USB registered
[    0.349789] usbcore: registered new interface driver usbfs
[    0.350039] usbcore: registered new interface driver hub
[    0.350749] usbcore: registered new device driver usb
[    0.351384] PCI: Using ACPI for IRQ routing
[    0.351384] PCI: pci_cache_line_size set to 64 bytes
[    0.351384] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f1b3000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f58f000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[    0.352856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.353253] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.355766] clocksource: Switched to clocksource hpet
[    0.356312] pnp: PnP ACPI init
[    0.357109] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.357615] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.357767] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.358214] system 00:01: [io  0x1000-0x1003] has been reserved
[    0.358667] system 00:01: [io  0x1010-0x101f] has been reserved
[    0.359103] system 00:01: [io  0xffff] has been reserved
[    0.359513] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.359952] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.359952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:02: [io  0x06a0-0x06af] has been reserved
[    0.359952] system 00:02: [io  0x06b0-0x06ff] has been reserved
[    0.359952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.359952] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.359952] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:06: [io  0x025d] has been reserved
[    0.359952] system 00:06: [io  0x025c] has been reserved
[    0.359952] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.360167] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.360645] system 00:06: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.361121] system 00:06: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.361592] system 00:06: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.362072] system 00:06: [mem 0xfec28000-0xfec2ffff] has been reserved
[    0.362553] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.363064] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.363263] pnp 00:07: Plug and Play ACPI device, IDs SYN1d1b SYN1d00 SYN0002 PNP0f13 (active)
[    0.363394] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.363524] system 00:09: [io  0x0240-0x0259] has been reserved
[    0.363991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.364879] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[    0.365372] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.365873] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.366363] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.366857] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367408] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.367898] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.368395] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.368805] system 00:0c: [io  0x0400-0x047f] has been reserved
[    0.369252] system 00:0c: [io  0x0500-0x053f] has been reserved
[    0.369693] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.370228] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.370705] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.371182] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.371676] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[    0.372171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372179] pnp: PnP ACPI: found 13 devices
[    0.380957] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.381648] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.381656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.381662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.381681] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.381688] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.381708] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.381726] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.381733] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.381781] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.382273] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.382870] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.383462] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.384060] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.384646] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.385095] pci 0000:00:1c.1: BAR 7: assigned [io  0x3000-0x3fff]
[    0.385545] pci 0000:00:1c.3: BAR 7: assigned [io  0x4000-0x4fff]
[    0.385998] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.386387] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.386830] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.387314] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.387902] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.388285] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.388736] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.389226] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.389817] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.390233] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.390690] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.391180] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.391775] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.392157] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.392608] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.393098] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.393700] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.394103] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.394108] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.394113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394122] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394126] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394131] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394135] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394140] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.394144] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.394149] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.394153] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.394158] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.394162] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.394166] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.394171] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.394175] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.394179] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.394184] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.394188] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.394193] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.394197] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.394202] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394206] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394210] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394215] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394219] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394224] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394458] NET: Registered protocol family 2
[    0.395149] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.395801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.396424] TCP: Hash tables configured (established 16384 bind 16384)
[    0.397028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.397512] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.398146] NET: Registered protocol family 1
[    0.398540] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.401674] PCI: CLS 64 bytes, default 64
[    0.404203] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    0.408673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.411230] io scheduler noop registered
[    0.411556] io scheduler deadline registered (default)
[    0.412180] gpio_it87: Unknown Chip found, Chip 0202 Revision 2
[    0.413720] hv_vmbus: registering driver hv_pci
[    0.414138] hv_vmbus: registering driver hyperv_fb
[    0.414552] intel_idle: MWAIT substates: 0x3020220
[    0.414554] intel_idle: v0.4.1 model 0x36
[    0.415019] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.415333] ACPI: AC Adapter [AC0] (on-line)
[    0.440589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.470262] ACPI: Lid Switch [LID]
[    0.470749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.471442] ACPI: Sleep Button [SLPB]
[    0.471890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.472528] ACPI: Power Button [PWRF]
[    0.474911] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.475996] thermal LNXTHERM:00: registered as thermal_zone0
[    0.476418] ACPI: Thermal Zone [THRM] (63 C)
[    0.477238] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.480090] Non-volatile memory driver v1.3
[    0.483829] loop: module loaded
[    0.484309] Guest personality initialized and is inactive
[    0.484904] VMCI host device registered (name=vmci, major=10, minor=63)
[    0.485403] Initialized host personality
[    0.485993] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[    0.487067] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[    0.488126] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170728/utaddress-247)
[    0.489188] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20170728/utaddress-247)
[    0.490317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.VGA.TCOI) (20170728/utaddress-247)
[    0.491442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.492164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.493231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.495362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.496081] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.497151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.498214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.498935] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.499659] VMware PVSCSI driver - version 1.0.7.0-k
[    0.500186] hv_vmbus: registering driver hv_storvsc
[    0.500738] ahci 0000:00:1f.2: version 3.0
[    0.501106] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.501649] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.502258] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
[    0.504418] scsi host0: ahci
[    0.505055] scsi host1: ahci
[    0.505678] scsi host2: ahci
[    0.506330] scsi host3: ahci
[    0.506778] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[    0.507357] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[    0.507918] ata3: DUMMY
[    0.508159] ata4: DUMMY
[    0.508915] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[    0.509469] hv_vmbus: registering driver hv_netvsc
[    0.509854] Fusion MPT base driver 3.04.20
[    0.510250] Copyright (c) 1999-2008 LSI Corporation
[    0.510709] Fusion MPT SPI Host driver 3.04.20
[    0.511120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.511607] ehci-pci: EHCI PCI platform driver
[    0.512763] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.513192] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.513793] ehci-pci 0000:00:1d.7: debug port 1
[    0.514113] ACPI: Battery Slot [BAT0] (battery present)
[    0.518488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.518522] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[    0.540123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.541063] hub 1-0:1.0: USB hub found
[    0.541418] hub 1-0:1.0: 8 ports detected
[    0.542734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.543221] ohci-pci: OHCI PCI platform driver
[    0.543620] ohci-platform: OHCI generic platform driver
[    0.544568] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.544990] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.546233] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010
[    0.547982] hub 2-0:1.0: USB hub found
[    0.548435] hub 2-0:1.0: 2 ports detected
[    0.549241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.549668] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.550303] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    0.550935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.551899] hub 3-0:1.0: USB hub found
[    0.552349] hub 3-0:1.0: 2 ports detected
[    0.553301] usbcore: registered new interface driver usb-storage
[    0.553955] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.556563] i8042: Detected active multiplexing controller, rev 1.1
[    0.559170] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.559568] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.559965] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.560407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.560808] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.561255] hv_vmbus: registering driver hyperv_keyboard
[    0.561774] rtc_cmos 00:03: RTC can wake from S4
[    0.562370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.562869] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.564393] sdhci: Secure Digital Host Controller Interface driver
[    0.564865] sdhci: Copyright(c) Pierre Ossman
[    0.566006] hidraw: raw HID events driver (C) Jiri Kosina
[    0.566486] hv_vmbus: registering driver hid_hyperv
[    0.566915] usbcore: registered new interface driver usbhid
[    0.567337] usbhid: USB HID core driver
[    0.567684] hv_utils: Registering HyperV Utility Driver
[    0.568088] hv_vmbus: registering driver hv_util
[    0.568454] hv_vmbus: registering driver hv_balloon
[    0.569382] NET: Registered protocol family 10
[    0.570351] Segment Routing with IPv6
[    0.570715] NET: Registered protocol family 17
[    0.571097] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.571999] 8021q: 802.1Q VLAN Support v1.8
[    0.572509] NET: Registered protocol family 40
[    0.573685] microcode: sig=0x30661, pf=0x8, revision=0x10c
[    0.574234] microcode: Microcode Update Driver: v2.2.
[    0.574273] sched_clock: Marking stable (573441123, 0)->(657968060, -84526937)
[    0.575503] registered taskstats version 1
[    0.576740] rtc_cmos 00:03: setting system clock to 2018-09-07 16:15:12 UTC (1536336912)
[    0.584900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.831528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.834278] ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
[    0.834837] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.837583] ata1.00: configured for UDMA/133
[    0.838642] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5
[    0.841240] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.841885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.842433] sd 0:0:0:0: [sda] Write Protect is off
[    0.842862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.843052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.877982]  sda: sda1 sda2
[    0.880409] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.171549] ata2: SATA link down (SStatus 0 SControl 300)
[    1.186977] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[    1.194364] Freeing unused kernel memory: 1052K
[    1.230632] Write protecting the kernel read-only data: 12288k
[    1.235448] Freeing unused kernel memory: 2024K
[    1.252890] Freeing unused kernel memory: 736K
[    1.487895] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[    1.488460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[    1.566812] init: Console is alive
[    1.796421] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    1.821964] pps_core: LinuxPPS API ver. 1 registered
[    1.822364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.823647] PTP clock support registered
[    1.824343] Button Hotplug driver version 0.4.1
[    1.824818] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    1.830753] init: - preinit -
[    1.890124] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.267747] random: jshn: uninitialized urandom read (4 bytes read)
[    2.309827] random: jshn: uninitialized urandom read (4 bytes read)
[    2.316834] random: jshn: uninitialized urandom read (4 bytes read)
[    2.470351] usb 1-7: new high-speed USB device number 4 using ehci-pci
[    2.490506] clocksource: Switched to clocksource tsc
[    2.691721] usb-storage 1-7:1.0: USB Mass Storage device detected
[    2.692832] scsi host4: usb-storage 1-7:1.0
[    3.754161] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.765748] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.433172] urandom_read: 5 callbacks suppressed
[    5.433177] random: jshn: uninitialized urandom read (4 bytes read)
[    5.722679] F2FS-fs (loop0): Mounted with checkpoint version = 1a030d9d
[    5.751832] mount_root: switching to f2fs overlay
[    5.833723] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    5.839672] urandom-seed: Seeding with /etc/urandom.seed
[    5.914891] procd: - early -
[    6.557234] procd: - ubus -
[    6.596946] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.610617] procd: - init -
[    6.950178] kmodloader: loading kernel modules from /etc/modules.d/*
[    6.954303] tun: Universal TUN/TAP device driver, 1.6
[    6.958028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.958547] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.961325] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    6.961834] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.964069] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.426558] Netfilter messages via NETLINK v0.30.
[    7.428839] ip_set: protocol 6
[    7.450984] i2c /dev entries driver
[    7.487885] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    7.488578] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    7.492106] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.492562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.494282] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.898600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.147745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.149259] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000000b000, e8:40:f2:3f:a9:58, XID 00a00000 IRQ 30
[    8.154185] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[    8.155901] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    8.174092] xt_time: kernel timezone is -0000
[    8.411155] Intel(R) Wireless WiFi driver for Linux
[    8.411610] Copyright(c) 2003- 2015 Intel Corporation
[    8.445655] PPP generic driver version 2.4.2
[    8.447497] NET: Registered protocol family 24
[    8.454488] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    8.455168] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUG disabled
[    8.455610] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
[    8.456054] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
[    8.456529] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[    8.501089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.504079] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.792405] r8169 0000:03:00.0 eth0: link down
[   11.792453] r8169 0000:03:00.0 eth0: link down
[   11.903937] random: fast init done
[   13.415479] r8169 0000:03:00.0 eth0: link up
[   30.131354] random: crng init done
18.11.20181958PackagesBug ReportMediumLowuqmi: unicode characters in SMS confuse uqmiTrunkNew Task Description

When using uqmi –get-message the message ends up truncated in case it contains unicode characters like german umlauts.

10.03.20192176KernelBug ReportMediumHighubiquiti loco xw (AR9342 Rev.2) stops receiving on wire...AllNew Task Description

This bug has been existing as long as the ubiquiti loco xw 5 ghz hardware is around, probably what we are dealing with is a hardware bug in the AR9342 Rev. 2 chip. It is somehow hard to reproduce, but it hits us reliable every couple of hours, sometimes days, running any version of OpenWrt up to todays master branch. It just happened again and this time I decided to check if the bug is actually listed on FS – in addition to creating the usual cron-job executing `iw dev wlan0 scan` every minute. There is even a watchdog in the community libremesh repository designed to catch exactly this bug:
https://github.com/libremesh/lime-packages/blob/master/packages/cotonete/Makefile#L21

So to run into it, here we got 2 ubiquiti nanobeam m5 devices running OpenWrt ar71xx/generic loco-m-xw pointing at each other over a distance of roughly 2km. This link is acceptable, but not perfect and slightly asymmetric.

Device A (worse RX SNR):

Station f0:9f:c2:xx:xx:7a (on wlan0-mesh)
	inactive time:	0 ms
	rx bytes:	1433997029
	rx packets:	8589913
	tx bytes:	23160025785
	tx packets:	15667682
	tx retries:	677924
	tx failed:	0
	rx drop misc:	30076
	signal:  	-76 [-79, -79] dBm
	signal avg:	-74 [-77, -77] dBm
	Toffset:	4887897799 us
	tx bitrate:	43.3 MBit/s MCS 10 short GI
	rx bitrate:	43.3 MBit/s MCS 4 short GI
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18117 seconds

Device B (better RX SNR)

Station fc:ec:da:xx:xx:8c (on wlan0-mesh)
	inactive time:	20 ms
	rx bytes:	23442553203
	rx packets:	16047526
	tx bytes:	1274688573
	tx packets:	8251479
	tx retries:	1337700
	tx failed:	2932
	rx drop misc:	45195
	signal:  	-72 [-79, -73] dBm
	signal avg:	-71 [-78, -73] dBm
	Toffset:	18446744068821653812 us
	tx bitrate:	57.8 MBit/s MCS 11 short GI
	rx bitrate:	43.3 MBit/s MCS 10 short GI
	last ack signal:24 dBm
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18179 seconds

Now it so happens that device A (and always only device A!) becomes deaf after some hours of mostly sending lots of traffic to device B. It will continue to send beacons, but loose all associations. device B will keep trying setting up a link, but it keeps ending up in ‘BLOCKED’ state and dumps using a monitor mode interface show that device A simply doesn’t react at all to any of the frames send by device B. A simple `iw dev wlan0 scan` on device A (which doesn’t give any results) fixes the problem.

The channel seems rather unused otherwise and signal quality only varies by weather conditions. Interestingly this seems to happen on non-DFS channels only. And it happens on Ad-Hoc mode (unencrypted, never tried encrypted) and 802.11s (open ie. setup via `iw` tool as well as with SAE ie. running `wpa_supplicant`) equally. It doesn’t happen on all nodes, but only on those with rather bad signal or at least one far-off neighbor.

Maybe related to FS#1246

I saw this occuring on ubnt nanostation loco m5 XW as well as on all nanobeam m5 variants (which is supposedly compatible with the loco-m-xw image).

ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47

WiFi EEPROM of the devices:

*
00001000  02 02 F0 9F C2 XX XX XX  00 30 3a 31 35 3a 36 64  |.....XXX.0:15:6d|
00001010  3a 64 64 3a 64 65 3a 61  64 00 00 00 00 00 1f 00  |:dd:de:ad.......|
00001020  33 01 00 00 00 00 04 00  00 00 2d 04 03 00 08 ff  |3.........-.....|
00001030  20 01 00 00 00 20 02 00  00 cc cc 0c 00 50 01 50  | .... .......P.P|
00001040  01 50 01 00 00 00 00 00  00 21 00 a4 00 00 00 00  |.P.......!......|
00001050  ff 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001060  0e 0e 03 00 2c e2 00 02  0e 1c e0 e0 00 0c e0 e0  |....,...........|
00001070  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001080  00 00 00 00 00 00 00 00  00 00 70 89 ac 00 00 00  |..........p.....|
00001090  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000010c0  00 00 00 70 ac 70 89 ac  70 89 ac 70 89 ac 22 22  |...p.p..p..p..""|
000010d0  22 22 22 22 22 22 22 22  20 1c 22 22 20 1c 22 22  |"""""""" ."" .""|
000010e0  20 1c 24 24 20 18 16 14  20 16 14 12 20 20 1c 14  | .$$ ... ...  ..|
000010f0  24 24 20 18 16 14 20 16  14 12 20 20 1c 14 24 24  |$$ ... ...  ..$$|
00001100  20 18 16 14 20 16 14 12  20 20 1c 14 22 22 1e 16  | ... ...  ..""..|
00001110  14 12 1e 14 12 10 20 20  1c 14 22 22 1e 16 14 12  |......  ..""....|
00001120  1e 14 12 10 20 20 1c 14  22 22 1e 16 14 12 1e 14  |....  ..""......|
00001130  12 10 20 20 1c 14 11 12  15 17 41 42 45 47 31 32  |..  ......ABEG12|
00001140  35 37 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |57pu..pu..pu..pu|
00001150  ac b8 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |..pu..pu..pu..pu|
*
00001170  ac b8 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |..<|<|<|<|<|<|<||
00001180  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
000011a0  3c 7c 10 01 00 00 22 22  02 00 00 00 00 00 00 00  |<|....""........|
000011b0  00 00 00 00 00 00 44 00  00 00 00 00 00 ff 00 00  |......D.........|
000011c0  00 00 00 00 00 00 00 00  00 00 00 00 ff 0e 0e 03  |................|
000011d0  00 2d e2 00 02 0e 1c 00  00 00 00 00 00 00 00 00  |.-..............|
000011e0  00 00 00 00 00 00 00 00  00 44 44 00 00 00 00 00  |.........DD.....|
000011f0  00 00 00 00 00 00 00 4c  58 68 8c a4 b4 bd cd d9  |.......LXh......|
00001200  00 89 00 00 00 dc 00 89  00 00 00 e0 00 8a 00 00  |................|
00001210  00 e2 00 8b 00 00 00 de  00 8b 00 00 00 de 00 8b  |................|
00001220  00 00 00 dc 00 89 00 00  00 da 00 8b 00 00 00 e0  |................|
00001230  00 89 00 00 00 e4 00 8a  00 00 00 e7 00 8b 00 00  |................|
00001240  00 e6 00 8b 00 00 00 e2  00 8c 00 00 00 e1 00 8c  |................|
00001250  00 00 00 df 00 8b 00 00  00 dd 00 8b 00 00 00 00  |................|
00001260  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00001280  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 4c  |...............L|
00001290  54 68 78 8c a0 b4 c5 4c  54 68 78 8c a0 b4 c5 4c  |Thx....LThx....L|
000012a0  54 68 78 8c a0 b4 c5 26  20 1e 1c 26 20 1e 1c 26  |Thx....& ..& ..&|
000012b0  20 1e 1c 26 20 1e 1c 26  20 1e 1c 26 20 1e 1c 26  | ..& ..& ..& ..&|
000012c0  20 1e 1c 26 20 1e 1c 26  22 20 1e 1c 1a 20 1e 1c  | ..& ..&" ... ..|
000012d0  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
000012e0  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
000012f0  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001300  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001310  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001320  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
00001330  1e 1c 1a 00 00 00 00 26  22 20 1e 1c 1a 20 1e 1c  |.......&" ... ..|
00001340  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
00001350  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
00001360  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001370  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001380  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001390  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
000013a0  1e 1c 1a 00 00 00 00 10  16 18 40 46 48 30 36 38  |..........@FH068|
000013b0  4c 54 68 78 8c a0 b9 cd  4c 54 68 78 8c a0 b9 cd  |LThx....LThx....|
*
000013f0  4c 54 68 78 8c a0 b9 cd  3c 7c 3c 7c 3c 7c 3c 7c  |LThx....<|<|<|<||
00001400  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
00001440  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
18.06.20192328Base systemBug ReportLowMediumAllocate resources to sort out odhcpd/dnsmasq interacti...TrunkNew Task Description

As IPv6 is being adopted, increasingly people are seeing dnsmasq log ‘spam’. See https://bugs.openwrt.org/index.php?do=details&task_id=1492&string=1492&search_name=&type%5B0%5D=&sev%5B0%5D=&pri%5B0%5D=&due%5B0%5D=&reported%5B0%5D=&cat%5B0%5D=&status%5B0%5D=open&percent%5B0%5D=&opened=&dev=&closed=&duedatefrom=&duedateto=&changedfrom=&changedto=&openedfrom=&openedto=&closedfrom=&closedto=

By default under openwrt, dhcpv4 leases are handled by dnsmasq whilst dhcpv6/RA is handled by openwrt’s odhcpd.

odhcpd could handle both v4 & v6 but does not yet have the same configuration flexibility for dhcp options as dnsmasq. I guess this is why no one has been brave enough to switch to odhcpd for ipv4 operations as well as ipv6.

dnsmasq can also handle dhcpv6/RA but not quite as flexibly as odhcpd. dnsmasq will automatically find IP6 prefixes on interfaces and start handling them, whilst openwrt’s strategy with odhcpd is to only handle stuff we tell you to handle, don’t do it automagically.

As dnsmasq is the default resolver for openwrt and the wider LAN, it needs to know about DHCP/hostname allocations. For DHCPv4 this is easy, dnsmasq is controlling them. For DHCPv6 a hosts file (called a statefile in the odhcpd code) is handed to dnsmasq.

By default this host file is not read dynamically, so odhcpd has to signal dnsmasq to re-read the host file (and clear caches etc etc) upon every ipv6 lease change.

This generates a lot of log spam and process startup overhead. There are also questions about service operability during this time.

Effort needs to be put into sorting this out.

Temporary workarounds:

Use ‘hostsdir’ dnsmasq option instead of ‘addn-hosts’ - dnsmasq will dynamically scan changes/additions to hosts in hostsdir whereas addn-hosts needs a SIGHUP. Host deletions cannot be handled by this method, so odhcpd would still need to SIGHUP on lease expiry. It might reduce some of the spam.

Longer term:

Teach dnsmasq to accept hostname updates over an IPC mechanism. ubus? and carry on using odhcpd for ipv6.

Teach dnsmasq to handle ipv6 prefix additions/deletions/handling via an IPC mechanism in the same way as odhcpd. Drop odhcpd and use dnsmasq for everything.

Use odhcpd for everything and use another dns resolver that interfaces nicely with odhcpd.

Why don’t I see this problem: I use dnsmasq to handle ipv6 but I’m lucky enough that this works for me.

This needs fixing/funding to sort it out though.

15.09.20192495Base systemBug ReportVery LowLowucert rebuild within SDK segfaults on Debian 10 and Ubu...TrunkNew Task Description

Using the 19.07-SNAPSHOT SDK build Sept 12 (last successful build by the buildbots it looks like), and current openwrt-19.07 branch on the feeds, if doing signed build, the build fails due to ucert segfaulting (this is on Debian 10).

ldd staging_dir/host/bin/ucert shows:

      linux-vdso.so.1 (0x00007ffd03d63000)
      libubox.so => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libubox.so (0x00007ff0db3b0000)
      libblobmsg_json.so => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libblobmsg_json.so (0x00007ff0db3a8000)
      libjson-c.so.2 => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libjson-c.so.2 (0x00007ff0db398000)
      libc.so.6 => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libc.so.6 (0x00007ff0daff8000)
      /lib64/ld-linux-x86-64.so.2 (0x00007ff0db3c8000)

I’m wondering if the problem is due to using host instead SDK libraries.


09.10.20192541KernelBug ReportMediumLowHardware offloading causes some flows to fail to be NAT...openwrt-19.07New Task Description

Just after a reboot, some flows are not NATed: packets from a machine in the LAN are sent to the WAN port with a private source IP address.

This is on a Linksys RE6500 (ramips mt7621) running openwrt 19.07-SNAPSHOT r10578-b3d70f628.
It is configured with flow_offloading and flow_offloading_hw.

Here is a tcpdump capture showing the problem on the WAN port (172.23.184.0/24 is my LAN address space):

root@openwrt:~# tcpdump -n -i eth0.20 net 172.23.184.0/24
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0.20, link-type EN10MB (Ethernet), capture size 262144 bytes
18:51:21.756552 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 112
18:51:22.651556 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148
18:51:26.681032 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 768
18:51:27.771654 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148

Here is what conntrack -L says:

udp      17 55 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=93 bytes=20412 [UNREPLIED] src=91.224.XX.YY dst=172.23.184.119 sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Notice the second dst= that shows the private IP address of the LAN machine.

After restarting the firewall, the flow is correctly NAT-ed and conntrack -L shows the correct entry (193.33.ZZ.WW is my public IP address):

udp      17 175 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=4 bytes=704 [UNREPLIED] src=91.224.XX.YY dst=193.33.ZZ.WW sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Note: when I only enable flow_offloading, the issue does not appear anymore, so this really seems to be an issue with the hw offloading integration in the firewall.

21.12.20192690Base systemBug ReportMediumMediumImagebuilder: "opkg_install_pkg: Package size mismatch"...AllNew Task Description

The Imagebuilder fails in the following situation:

  • download and unpack the imagebuilder
  • build an image: it works
  • wait a few days/weeks
  • try to build an image again with the same imagebuilder: it fails

It fails quite late during building with lots of errors like this:

   opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   opkg_install_cmd: Cannot install package luci.
   opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   opkg_install_cmd: Cannot install package base-files.
   opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   opkg_install_cmd: Cannot install package busybox.

This happens with stable releases (18.06.5), RC releases (19.07.0-rc2), and with several targets.

It looks like package sizes are somehow kept in a local cache during the first build, and are not updated when building again a few days later. This is strange because the imagebuilder seems to fetch new versions of the Packages.gz files.

Below is the full log.

  $ make image PROFILE=rb-nor-flash-16M"" BIN_DIR="${IMAGEBUILDER_DIR}" EXTRA_IMAGE_NAME="rzn" FILES="files/" PACKAGES="luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr -ppp -ppp-mod-pppoe -kmod-ppp -kmod-pppoe -kmod-pppox"
  
  Building images for ar71xx - MikroTik RouterBoard (16 MB SPI NOR)
  Packages: luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr base-files busybox dnsmasq dropbear firewall fstools ip6tables iptables kernel kmod-ath9k kmod-gpio-button-hotplug kmod-ledtrig-gpio libc libgcc logd mtd netifd odhcp6c odhcpd-ipv6only opkg rbcfg rssileds swconfig uboot-envtools uci uclient-fetch wpad-mini
  
  Downloading http://downloads.openwrt.org/releases/18.06.5/targets/ar71xx/mikrotik/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_core
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/base/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_base
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_luci
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_packages
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/routing/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_routing
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/telephony/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_telephony
  Downloading file:packages/Packages
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/imagebuilder
  
  Installing packages...
  Installing libc (1.1.19-2) to root...
  Installing libgcc (7.3.0-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libgcc_7.3.0-2_mips_24kc.ipk.
  Configuring libgcc.
  Configuring libc.
  Installing kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) to root...
  Configuring kernel.
  Installing luci (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci_git-19.353.67991-868abc1-1_all.ipk
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libubox_2018-07-25-c83a84af-2_mips_24kc.ipk.
  Installing luci-mod-admin-full (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-mod-admin-full_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-en (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-en_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-base (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-base_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-i18n-firewall-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-firewall-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-app-firewall (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-app-firewall_git-19.353.67991-868abc1-1_all.ipk
  Installing base-files (194.2-r7897-9d401013fc) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/base-files_194.2-r7897-9d401013fc_mips_24kc.ipk.
  Installing libuci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libuci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing busybox (1.28.4-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/busybox_1.28.4-3_mips_24kc.ipk.
  Installing dnsmasq (2.80-1.4) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dnsmasq_2.80-1.4_mips_24kc.ipk.
  Installing dropbear (2017.75-7.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dropbear_2017.75-7.1_mips_24kc.ipk.
  Installing firewall (2018-08-13-1c4d5bcd-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/firewall_2018-08-13-1c4d5bcd-1_mips_24kc.ipk.
  Installing fstools (2019-03-28-ff1ded63-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/fstools_2019-03-28-ff1ded63-5_mips_24kc.ipk.
  Installing ip6tables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/ip6tables_1.6.2-3_mips_24kc.ipk.
  Installing kmod-nf-reject6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-reject6_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt6_4.9.198-1_mips_24kc.ipk
  Installing kmod-ipt-core (4.9.198-1) to root...
  Downloading file:packages/kmod-ipt-core_4.9.198-1_mips_24kc.ipk
  Installing kmod-ip6tables (4.9.198-1) to root...
  Downloading file:packages/kmod-ip6tables_4.9.198-1_mips_24kc.ipk
  Installing libip4tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip4tc_1.6.2-3_mips_24kc.ipk.
  Installing libip6tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip6tc_1.6.2-3_mips_24kc.ipk.
  Installing libxtables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libxtables_1.6.2-3_mips_24kc.ipk.
  Installing iptables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/iptables_1.6.2-3_mips_24kc.ipk.
  Package iptables (1.6.2-3) installed in root is up to date.
  Package kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) installed in root is up to date.
  Installing kmod-ath9k (4.9.198+2017-11-01-10) to root...
  Downloading file:packages/kmod-ath9k_4.9.198%2b2017-11-01-10_mips_24kc.ipk
  Installing libnl-tiny (0.1-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libnl-tiny_0.1-5_mips_24kc.ipk.
  Installing kmod-gpio-button-hotplug (4.9.198-2) to root...
  Downloading file:packages/kmod-gpio-button-hotplug_4.9.198-2_mips_24kc.ipk
  Installing kmod-ledtrig-gpio (4.9.198-1) to root...
  Downloading file:packages/kmod-ledtrig-gpio_4.9.198-1_mips_24kc.ipk
  Package libc (1.1.19-2) installed in root is up to date.
  Package libgcc (7.3.0-2) installed in root is up to date.
  Installing logd (2018-02-14-128bc35f-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/logd_2018-02-14-128bc35f-2_mips_24kc.ipk.
  Installing mtd (23) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/mtd_23_mips_24kc.ipk.
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Installing netifd (2019-01-31-a2aba5c7-2.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/netifd_2019-01-31-a2aba5c7-2.1_mips_24kc.ipk.
  Installing odhcp6c (2018-07-14-67ae6a71-15) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcp6c_2018-07-14-67ae6a71-15_mips_24kc.ipk.
  Installing odhcpd-ipv6only (1.15-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcpd-ipv6only_1.15-3_mips_24kc.ipk.
  Installing opkg (2019-06-14-dcbc142e-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/opkg_2019-06-14-dcbc142e-1_mips_24kc.ipk.
  Installing rbcfg (2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rbcfg_2_mips_24kc.ipk.
  Installing rssileds (0.2-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rssileds_0.2-1_mips_24kc.ipk.
  Installing swconfig (11) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/swconfig_11_mips_24kc.ipk.
  Installing uboot-envtools (2018.03-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uboot-envtools_2018.03-1_mips_24kc.ipk.
  Installing uci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing uclient-fetch (2018-11-24-3ba74ebc-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uclient-fetch_2018-11-24-3ba74ebc-1_mips_24kc.ipk.
  Installing wpad-mini (2018-05-21-62566bc2-8) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/wpad-mini_2018-05-21-62566bc2-8_mips_24kc.ipk.
  Configuring kmod-nf-reject6.
  Configuring uboot-envtools.
  Configuring kmod-ledtrig-gpio.
  Configuring rbcfg.
  Configuring luci-app-firewall.
  Configuring kmod-nf-ipt.
  Configuring libxtables.
  Configuring libip4tc.
  Configuring kmod-nf-ipt6.
  Configuring kmod-ipt-core.
  Configuring kmod-ip6tables.
  Configuring fstools.
  Configuring libip6tc.
  Configuring luci-base.
  Configuring luci-mod-admin-full.
  Configuring kmod-gpio-button-hotplug.
  Configuring luci-i18n-firewall-fr.
  Configuring iptables.
  Configuring ip6tables.
  Configuring luci-i18n-base-en.
  Configuring luci-i18n-base-fr.
  Collected errors:
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package luci.
   * opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   * opkg_install_cmd: Cannot install package base-files.
   * opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   * opkg_install_cmd: Cannot install package busybox.
   * opkg_install_pkg: Package size mismatch: dnsmasq is 99783 bytes, expecting 99775 bytes
   * opkg_install_cmd: Cannot install package dnsmasq.
   * opkg_install_pkg: Package size mismatch: dropbear is 86613 bytes, expecting 86610 bytes
   * opkg_install_cmd: Cannot install package dropbear.
   * opkg_install_pkg: Package size mismatch: firewall is 40776 bytes, expecting 40777 bytes
   * opkg_install_cmd: Cannot install package firewall.
   * opkg_install_pkg: Package size mismatch: libnl-tiny is 12953 bytes, expecting 12948 bytes
   * opkg_install_cmd: Cannot install package kmod-ath9k.
   * opkg_install_pkg: Package size mismatch: logd is 10114 bytes, expecting 10111 bytes
   * opkg_install_cmd: Cannot install package logd.
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package mtd.
   * opkg_install_pkg: Package size mismatch: netifd is 62005 bytes, expecting 62004 bytes
   * opkg_install_cmd: Cannot install package netifd.
   * opkg_install_pkg: Package size mismatch: odhcp6c is 23650 bytes, expecting 23646 bytes
   * opkg_install_cmd: Cannot install package odhcp6c.
   * opkg_install_pkg: Package size mismatch: odhcpd-ipv6only is 28830 bytes, expecting 28845 bytes
   * opkg_install_cmd: Cannot install package odhcpd-ipv6only.
   * opkg_install_pkg: Package size mismatch: opkg is 58890 bytes, expecting 58895 bytes
   * opkg_install_cmd: Cannot install package opkg.
   * opkg_install_pkg: Package size mismatch: rssileds is 4056 bytes, expecting 4059 bytes
   * opkg_install_cmd: Cannot install package rssileds.
   * opkg_install_pkg: Package size mismatch: swconfig is 9478 bytes, expecting 9484 bytes
   * opkg_install_cmd: Cannot install package swconfig.
   * opkg_install_pkg: Package size mismatch: uci is 7267 bytes, expecting 7262 bytes
   * opkg_install_cmd: Cannot install package uci.
   * opkg_install_pkg: Package size mismatch: uclient-fetch is 7489 bytes, expecting 7485 bytes
   * opkg_install_cmd: Cannot install package uclient-fetch.
   * opkg_install_pkg: Package size mismatch: wpad-mini is 258733 bytes, expecting 258725 bytes
   * opkg_install_cmd: Cannot install package wpad-mini.
  make[2]: *** [Makefile:153: package_install] Error 255
  make[1]: *** [Makefile:114: _call_image] Error 2
  make: *** [Makefile:193: image] Error 2
26.12.20192695KernelBug ReportVery LowCriticalKernel panic during boot on Gehua ghl-r-001TrunkNew Task Description

See https://github.com/openwrt/openwrt/pull/2483

without this patch the ghl-r-001 cannot be boot.

reproduct in both 19.7-rc2 and git master.

29.01.20202781Base systemBug ReportLowMediumArcher C50 v4 Mac80211 Looses Internet Access after 20’...openwrt-19.07New Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Problem Device:
TP-Link Archer C50 (Canadian) v4 + v4.2

Software version:
openwrt 19.07 r10860, default packages versions.

Steps to reproduce:
Setup wireless like below. I’ve intentionally left encryption set to “none” for both radio’s for quick testing but i’ve tested with WPA2 CCMP encryption with no change in results.

config wifi-device ‘radio0’ option type ‘mac80211’ option channel ‘11’ option hwmode ‘11g’ option path ‘platform/10300000.wmac’ option htmode ‘HT20’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio0’ option device ‘radio0’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

config wifi-device ‘radio1’ option type ‘mac80211’ option hwmode ‘11a’ option path ‘pci0000:00/0000:00:00.0/0000:01:00.0’ option htmode ‘VHT80’ option channel ‘112’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio1’ option device ‘radio1’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

Alternative Settings:

htmode ‘HT40’ No change in results
channel ‘1’, ‘6’, ‘11’ No change in results
disassoc_low_ack ‘0’ No change in results

25.02.20202856Base systemBug ReportVery LowHighWifi "dies" (hostapd drops all clients) on some ar71xx ...openwrt-19.07New Task Description

This issue is very strange, i don’t even know if it’s just faulty hardware but i have it happening on multiple devices now

Most affected hardware

  • Nanobridge M5 , in this case transmitting enough data can trigger it almost instantly
  • TL-WR841ND , in this case i had it happen like 3-4 times a year
  • CPE 210 v3 , in this case it happens like each week

For the last one, which is running 19.07 i found on the system log

Tue Feb 25 07:38:58 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED [redacted mac1]
Tue Feb 25 07:38:58 2020 daemon.info hostapd: wlan0: STA [redacted mac1] IEEE 802.11: disassociated due to inactivity
Tue Feb 25 07:38:59 2020 daemon.info hostapd: wlan0: STA [redacted mac1] IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Feb 25 07:41:32 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED [redacted mac2]
Tue Feb 25 07:41:32 2020 daemon.info hostapd: wlan0: STA [redacted mac2] IEEE 802.11: disassociated due to inactivity
Tue Feb 25 07:41:33 2020 daemon.info hostapd: wlan0: STA [redacted mac2] IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Feb 25 07:42:49 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 07:49:55 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 07:55:02 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:00:15 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:05:25 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:10:44 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:16:00 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
08.05.20203070Base systemBug ReportMediumLowkmod-cryptodev: WARNING: possible circular locking depe...TrunkNew Task Description

OpenWrt master r13174-73fa1aba94 on octeon with kernel 5.4

[   70.971145] 
[   70.972662] ======================================================
[   70.978843] WARNING: possible circular locking dependency detected
[   70.985029] 5.4.39 #0 Not tainted
[   70.988348] ------------------------------------------------------
[   70.994531] unbound/2895 is trying to acquire lock:
[   70.999414] 800000041baeb868 (&pcr->fcrypt.sem){+.+.}, at: crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.009267] 
[   71.009267] but task is already holding lock:
[   71.015103] 800000041b911468 (&ses_new->sem){+.+.}, at: crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.024691] 
[   71.024691] which lock already depends on the new lock.
[   71.024691] 
[   71.032866] 
[   71.032866] the existing dependency chain (in reverse order) is:
[   71.040347] 
[   71.040347] -> #1 (&ses_new->sem){+.+.}:
[   71.045773]        lock_acquire+0xe0/0x220
[   71.049888]        __mutex_lock+0x94/0x628
[   71.054001]        crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.060365]        crypto_get_session_by_sid+0x1e4/0x12b8 [cryptodev]
[   71.066806]
[   71.066806] -> #0 (&pcr->fcrypt.sem){+.+.}:
[   71.072485]        check_noncircular+0x1a8/0x260
[   71.077110]        __lock_acquire+0x12f8/0x19f8
[   71.081648]        lock_acquire+0xe0/0x220
[   71.085754]        __mutex_lock+0x94/0x628
[   71.089862]        crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.096226]        crypto_get_session_by_sid+0x6cc/0x12b8 [cryptodev]
[   71.102666]
[   71.102666] other info that might help us debug this:
[   71.102666]
[   71.110668]  Possible unsafe locking scenario:
[   71.110668]
[   71.116588]        CPU0                    CPU1
[   71.121119]        ----                    ----
[   71.125650]   lock(&ses_new->sem);
[   71.129058]                                lock(&pcr->fcrypt.sem);
[   71.135242]                                lock(&ses_new->sem);
[   71.141165]   lock(&pcr->fcrypt.sem);
[   71.144834]
[   71.144834]  *** DEADLOCK ***
[   71.144834]
[   71.150756] 1 lock held by unbound/2895:
[   71.154681]  #0: 800000041b911468 (&ses_new->sem){+.+.}, at: crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.164700]
[   71.164700] stack backtrace:
[   71.169067] CPU: 1 PID: 2895 Comm: unbound Not tainted 5.4.39 #0
[   71.175075] Stack : ffffffff82790000 0000000000000000 0000000010108ce0 ed34220aed96997f
[   71.183091]         ed34220aed96997f 0000000000000000 800000041bb976f8 ffffffff837d0000
[   71.191106]         0000000000000000 0000000000000001 0000000000000000 ffffffff811ac4bc
[   71.199118]         6e626f756e64204e 0000000000000000 ffffffffffffffff 0000000000000010
[   71.207132]         0000000000000000 ffffffff81b40000 fffe000000000000 ffffffff81bc0000
[   71.215145]         0000000000000000 0000000000000000 ffffffff81b40000 0000000000000000
[   71.223158]         800000041f2e6200 0000000000000000 ffffffff81597628 1e00000010734ac7
[   71.231173]         0000000000000001 800000041bb94000 800000041bb976f0 47500c0a872e7996
[   71.239186]         ffffffff81865d8c 0000000000000000 800000041bb97828 ed34220aed96997f
[   71.247198]         ffffffff81b40bf7 ffffffff81865c54 ffffffff8111d4c8 ffffffff81a42a50
[   71.255213]         ...
[   71.257668] Call Trace:
[   71.260136] [<ffffffff8111d4c8>] show_stack+0x40/0x128
[   71.265288] [<ffffffff81865d8c>] dump_stack+0xe4/0x150
[   71.270444] [<ffffffff8119fb58>] check_noncircular+0x1a8/0x260
[   71.276289] [<ffffffff811a2d38>] __lock_acquire+0x12f8/0x19f8
[   71.282046] [<ffffffff811a3d80>] lock_acquire+0xe0/0x220
[   71.287374] [<ffffffff8188532c>] __mutex_lock+0x94/0x628
[   71.292706] [<ffffffffc02a7638>] crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.300290] [<ffffffffc02a7cc4>] crypto_get_session_by_sid+0x6cc/0x12b8 [cryptodev]
01.06.20203140Base systemBug ReportVery LowLowsysupgrade spews lost of errors on x86_64TrunkNew Task Description

This is on an x86_64 build of master from last Monday (circa 6e8b689).

The exact hardware is a Supermicro SYS-5018D-FN8T, 32GB of DRAM, 512GB of NVMe.

I built a new master today (8d2c031f) and scp’d it onto /tmp/ of my router. Then did a “sysupgrade /tmp/...” of that:

root@OpenWrt:/# ifdown wan
root@OpenWrt:/# 
root@OpenWrt:/# 
root@OpenWrt:/# sysupgrade /tmp/openwrt-r13360\+64-4661b05390-x86-64-generic-squashfs-combined-efi.img 
Image metadata not found
Reading partition table from bootdisk...
cat: write error: Broken pipe
Reading partition table from image...
Saving config files...
Commencing upgrade. Closing all shell sessions.
Watchdog handover: fd=7
- watchdog -
killall: telnetd: no process killed
killall: dropbear: no process kiSending TERM to remaining processes ... ntpd sh snmpd dhcpd ipset-dns collectd lldpd lldpd smartd named sleep ubusd askfirst urngd netifd rngd crond lighttpd sshd syslog-ng 
Sending KILL to remaining processes ... 
Switching to ramdisk...
Performing system upgrade...
Reading partition table from bootdisk...
dd: warning: partial read (8192 bytes); suggest iflag=fullblock
0+63 records in
0+63 records out
1101824 bytes (1.1 MB, 1.1 MiB) copied, 0.00492347 s, 224 MB/s
Reading partition table from image...
Writing image to /dev/nvme0n1p1...
cat: write error: Broken pipe
40959+0 records in
19+1 records out
20971008 bytes (21 MB, 20 MiB) copied, 0.0963313 s, 218 MB/s
Writing image to /dev/nvme0n1p2...
462847+0 records in
225+1 records out
236977664 bytes (237 MB, 226 MiB) copied, 0.810288 s, 292 MB/s
Writing new UUID to /dev/nvme0n1...
4+0 records in
4+0 records out
cat: write error: Broken pipe
4 bytes copied, 0.00439713 s, 0.9 k[ 2308.927159] F2FS-fs (nvme0n1p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
B/s
[ 2308.945667] F2FS-fs (nvme0n1p1): Can't find valid F2FS filesystem in 1th superblock
[ 2308.963141] F2FS-fs (nvme0n1p1): Magic Mismatch, valid(0xf2f52010) - read(0x6020601)
[ 2308.980487] F2FS-fs (nvme0n1p1): Can't find valid F2FS filesystem in 2th superblock
Upgrading bootloader on /dev/nvme0n1...
touch: /tmp/boot/grub/upgraded: No such file or directory
Upgrade completed
Rebooting system...
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[ 2310.852582] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20190816/nsprepkg-96)
[ 2310.881404] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20190816/nsprepkg-96)
[ 2311.080235] reboot: Restarting system
[ 2311.093088] reboot: machine restart

Note that on reboot, dmesg says:

...
May 31 16:43:17 OpenWrt kernel: [    3.721825] Copyright (c) 1999-2008 LSI Corporation
May 31 16:43:17 OpenWrt kernel: [    3.724539] nvme nvme0: 7/0/0 default/read/poll queues
May 31 16:43:17 OpenWrt kernel: [    3.732035] Fusion MPT SPI Host driver 3.04.20
May 31 16:43:17 OpenWrt kernel: [    3.752418] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 31 16:43:17 OpenWrt kernel: [    3.753680] GPT:Primary header thinks Alt. header is not at the end of the disk.
May 31 16:43:17 OpenWrt kernel: [    3.764418] ehci-pci: EHCI PCI platform driver
May 31 16:43:17 OpenWrt kernel: [    3.777281] GPT:504894 != 1000215215
May 31 16:43:17 OpenWrt kernel: [    3.787218] ehci-pci 0000:00:1a.0: EHCI Host Controller
May 31 16:43:17 OpenWrt kernel: [    3.795949] GPT:Alternate GPT header not at the end of the disk.
May 31 16:43:17 OpenWrt kernel: [    3.795950] GPT:504894 != 1000215215
May 31 16:43:17 OpenWrt kernel: [    3.806441] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
May 31 16:43:17 OpenWrt kernel: [    3.817622] GPT: Use GNU Parted to correct GPT errors.
May 31 16:43:17 OpenWrt kernel: [    3.817629]  nvme0n1: p1 p2 p128
...

but I don’t know if that’s related or not.

10.07.20203221PackagesBug ReportLowLowubox: validate.c: Link-Local IPv6 with interface ID not...AllNew Task Description

validate.c uses inet_pton for identifying IPv6 addresses [1], and this seems to not understand interface identifiers as used for Link-local IPv6 addresses.

Reproduce:

root@FFF-GW-Adrian:~# /sbin/validate_data host fdff::1
host - fdff::1 = true
root@FFF-GW-Adrian:~# /sbin/validate_data host fe80::1
host - fe80::1 = true
root@FFF-GW-Adrian:~# /sbin/validate_data host fe80::1%br-mesh
host - fe80::1%br-mesh = false

This is a problem practically whenever validata_data is used to check uci values.

For example, it is not possible to use a link-local address for specifying an NTP server:

https://github.com/openwrt/openwrt/blob/master/package/utils/busybox/files/sysntpd#L33

If ‘server:list(host)’ is changed to ‘server:list(string)’ there, it obviously works fine, as it’s just the validation.

[1] https://git.openwrt.org/?p=project/ubox.git;a=blob;f=validate/validate.c;h=e72b8117ecd8b680778b0f5c7637ed6546a7736b;hb=HEAD#l402

20.09.20203353PackagesBug ReportVery LowMediumiproute2 compilation fails due to dynsyms syntax errorTrunkNew Task Description

Building master:

files="e_bpf.c em_canid.c em_cmp.c em_ipset.c em_ipt.c em_meta.c em_nbyte.c em_u32.c f_basic.c f_bpf.c f_cgroup.c f_flow.c f_flower.c f_fw.c f_matchall.c f_route.c f_rsvp.c f_tcindex.c f_u32.c m_action.c m_bpf.c m_connmark.c m_csum.c
m_ct.c m_ctinfo.c m_ematch.c m_estimator.c m_gact.c m_gate.c m_ife.c m_ipt.c m_mirred.c m_mpls.c m_nat.c m_pedit.c m_police.c m_sample.c m_simple.c m_skbedit.c m_skbmod.c m_tunnel_key.c m_vlan.c m_xt_old.c p_eth.c p_icmp.c p_ip.c p_ip
6.c p_tcp.c p_udp.c q_atm.c q_cake.c q_cbq.c q_cbs.c q_choke.c q_clsact.c q_codel.c q_drr.c q_dsmark.c q_etf.c q_ets.c q_fifo.c q_fq.c q_fq_codel.c q_fq_pie.c q_gred.c q_hfsc.c q_hhf.c q_htb.c q_ingress.c q_mqprio.c q_multiq.c q_netem
.c q_pie.c q_plug.c q_prio.c q_qfq.c q_red.c q_rr.c q_sfb.c q_sfq.c q_skbprio.c q_taprio.c q_tbf.c static-syms.c tc.c tc_cbq.c tc_class.c tc_core.c tc_estimator.c tc_exec.c tc_filter.c tc_monitor.c tc_qdisc.c tc_red.c tc_stab.c tc_uti
l.c" ; \
echo "{" > dynsyms.list ; \
for s in `grep -B 3 '\<dlsym' $files | sed -n '/snprintf/{s:.*"\([^"]*\)".*:\1:;s:%s::;p}'` ; do \
        sed -n '/'$s'[^ ]* =/{s:.* \([^ ]*'$s'[^ ]*\) .*:\1;:;p}' $files ; \
done >> dynsyms.list ; \
echo "show_stats; print_nl; print_tm; parse_rtattr; parse_rtattr_flags; get_u32; matches; addattr_l; addattr_nest; addattr_nest_end; };" >> dynsyms.list
    CC       m_xt.so
In file included from ../include/uapi/linux/netfilter_ipv4/ip_tables.h:21,
                 from m_xt.c:19:
../include/uapi/linux/if.h:134: warning: "IFF_VOLATILE" redefined
 #define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\

In file included from m_xt.c:16:
/home/user/dev/openwrt/staging_dir/toolchain-mips_24kc_gcc-8.4.0_musl/include/net/if.h:48: note: this is the location of the previous definition
 #define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST| \

    CC       emp_ematch.tab.o
/home/user/dev/openwrt/staging_dir/toolchain-mips_24kc_gcc-8.4.0_musl/lib/gcc/mips-openwrt-linux-musl/8.4.0/../../../../mips-openwrt-linux-musl/bin/ld:dynsyms.list:0: syntax error in dynamic list
collect2: error: ld returned 1 exit status
make[5]: *** [Makefile:174: m_xt.so] Error 1

The dynsyms file contains:

$ cat ./build_dir/target-mips_24kc_musl/linux-ath79_generic/iproute2-tc/iproute2-5.8.0/tc/dynsyms.list
{
bpf_action_util;
connmark_action_util;
csum_action_util;
ct_action_util;
ctinfo_action_util;
gact_action_util;
gate_action_util;
ife_action_util;
ipt_action_util;
mirred_action_util;
mpls_action_util;
nat_action_util;
pedit_action_util;
police_action_util;
sample_action_util;
simple_action_util;
skbedit_action_util;
skbmod_action_util;
tunnel_key_action_util;
vlan_action_util;
ipt_action_util;
canid_ematch_util;
cmp_ematch_util;
ipset_ematch_util;
ipt_ematch_util;
meta_ematch_util;
nbyte_ematch_util;
u32_ematch_util;
p_pedit_eth;
p_pedit_icmp;
p_pedit_ip;
p_pedit_ip6;
p_pedit_tcp;
p_pedit_udp;
atm_qdisc_util;
cake_qdisc_util;
cbq_qdisc_util;
cbs_qdisc_util;
choke_qdisc_util;
clsact_qdisc_util;
codel_qdisc_util;
drr_qdisc_util;
dsmark_qdisc_util;
etf_qdisc_util;
ets_qdisc_util;
bfifo_qdisc_util;
pfifo_qdisc_util;
pfifo_head_drop_qdisc_util;
pfifo_fast_qdisc_util;
fq_qdisc_util;
fq_codel_qdisc_util;
fq_pie_qdisc_util;
gred_qdisc_util;
hfsc_qdisc_util;
hhf_qdisc_util;
htb_qdisc_util;
ingress_qdisc_util;
mqprio_qdisc_util;
multiq_qdisc_util;
netem_qdisc_util;
pie_qdisc_util;
plug_qdisc_util;
prio_qdisc_util;
qfq_qdisc_util;
red_qdisc_util;
rr_qdisc_util;
sfb_qdisc_util;
sfq_qdisc_util;
skbprio_qdisc_util;
taprio_qdisc_util;
tbf_qdisc_util;
basic_filter_util;
bpf_filter_util;
cgroup_filter_util;
flow_filter_util;
flower_filter_util;
fw_filter_util;
matchall_filter_util;
route_filter_util;
rsvp_filter_util;
rsvp6_filter_util;
tcindex_filter_util;
u32_filter_util;
bpf_exec_util;
show_stats; print_nl; print_tm; parse_rtattr; parse_rtattr_flags; get_u32; matches; addattr_l; addattr_nest; addattr_nest_end; };
 


01.01.20213552Base systemBug ReportMediumLowLinksys RE6500 bootloops with latest snapshotsTrunkNew Task Description

The RE6500 was working fine on an old 19.07 snapshot: OpenWrt 19.07-SNAPSHOT r10578-b3d70f628b

I sysupgraded to latest snapshot and it does not come up. Judging from the LEDs, it seems to bootloop.

Booting the latest snapshot initramfs through TFTP works. I sysupgraded again from the initramfs, and it still bootloops.

Possibly related to FS#3539. I will try to get a serial output to see what happens.

02.01.20213559Base systemBug ReportMediumLowuclient-fetch fails to download more than 2 filesAllNew Task Description

uclient-fetch has support for downloading several files:

uclient-fetch URL1 URL2 URL3 ...

However, this only works for the first two URLs. The third and above URLs simply cause uclient-fetch to re-download the second URL again.

In addition, only the first URL is checked for validity. If a subsequent URL is invalid, then the previous URL is re-used:

uclient-fetch http://example.com invalid

This example will download http://example.com twice.

12.10.2016222Base systemFeature RequestVery LowLowproviding pre-built images for extroot for devices with...TrunkUnconfirmed Task Description

Currently, the only way to be able to make extroot (use an external drive as overlay) for 4MiB devices is to build an image with the Image Builder as they can’t fit the packages needed in the jffs.

For most linux users this isn’t a major issue as the Image Builder runs on Linux and with a couple commands you build all, but it’s still time-consuming.

For everyone else this is an issue, as they need to get a linux system, learn how to use the Image Builder, and so on.

I’m asking if it is possible to make pre-built images with the right packages to allow extroot on 4 MiB devices.

The packages I thing we need in these pre-built images are all is needed by the device to be able to format and check its own drive, because again most users don’t have access to a linux system to format a drive with ext4 or whatever.

It seems e2fsprogs is too big to fit with the other packages required, currently only f2fs filesystem tools are split and can be used in 4MiB devices for extroot.

These are the packages that currently should allow building an extrootable image that fits on 4MiB storage:

blkid block-mount kmod-fs-f2fs kmod-usb-storage kmod-usb-uhci kmod-usb-ohci mkf2fs f2fsck

(of course no luci is included).

29.11.2016315Base systemFeature RequestVery LowMediumImprove sysupgrade (CLI) on dual-partition routersTrunkUnconfirmed Task Description

Some of the recent Linksys (maybe other) routers have two partitions: WRT1900, EA8500, etc.

Would be great if when running sysupgrade on those routers it did NOT kill all active processes and kept the router working while writing an image to the inactive partition.

Would also be great if there was an option to prevent automatic reboot after writing an image.

Ultimate goal is to have an upgrade process where current working state is uninterrupted and only when you reboot – you boot into new image.

03.12.2016320Base systemFeature RequestVery LowLowrelayd feature requestTrunkUnconfirmed Task Description

I found a couple of bugs with relayd based bridge configuration and I would like to suggest a feature request. Will fill one entry per issue:

On today’s trunk

3- in a configuration where the network attached to the wireless radio is configured via DHCP, the listening interface is not set up automatically. DD-WRT and Gargoyle do this automatically ( they overwrite the config/network file with the gateway parameter and reload relayd.

 


17.01.2017398PackagesFeature RequestVery LowLowodhcpd: add UCI option to insert DHCP fill for missing ...TrunkUnconfirmed Task Description

This is a request for a common DHCP function found in other software. It would be nice for an odhcpd general option to enable it to fill in unnamed leases. DHCPv4 use the MAC as in unknown-010203040506 and DHCPv6 use the last 64 bits of the DUID as in unknown-0102030405060708. This can be used to figure out which device has failed to send its host name. This is a common problem with DHCPv6. This is a common problem for smart TV or cameras. Consider logs from a device other than the DHCP serving router. Consider where IT may not want to static assign 100’s of host names for display devices over a large work site or campus. Security logs and DHCP logs on a distributed network can then be reconciled a-synchronously, off line, or only when an investigation is required.

18.01.2017401PackagesFeature RequestVery LowLowodhcpd: lease trigger script receives no argumentsTrunkUnconfirmed Task Description

when odhcpd calls the “lease trigger” script it does not pass any arguments to the script. The reason for the trigger and the host involved in the trigger are not shared. There is no discretion for RENEW, REBIND, CONFIRM, or RELEASE. Scripts which wish to load DNS with limited data, need to store their own copy of DHCP lease file and do differences. Otherwise a raw translate and dump of a large DHCP network could cause a lot of congestion as DHCP clients come on line. Reseting a network can cause an “in rush” flow like air conditioning loads on a power grid during a summer power outage.
This is exacerbated if the DNS is served on a separate device over the network, such as nsd and nsd-control (bind or unbound also). It would be good to at least pass the command and parameters common to a odhcpd lease file line.

18.01.2017403PackagesFeature RequestVery LowLowodhcpd: expand the capability of DHCPv6 HOSTID assignem...TrunkUnconfirmed Task Description

It would be nice to assign the HOSTID range or bit width as an option. odhcpd just assigns ::0100~::0FFF without any options. It would be nice to be able to use all 64 bits. With this, also it would be nice to add a random seed and seed time as options. This way the DUID hash-to-HOSTID could be rotated. In this way, SLAAC privacy addresses could be replicated with STATEFUL DHCP control and well known hostnames. This would support high-accountability networks like Universities and other large organizations.

It would be a counter to Google’s lack of “interest” in supporting DHCPv6. This would provide DHCPv6 privacy addresses.
Android Bug: https://code.google.com/p/android/issues/detail?id=32621

18.01.2017406Base systemFeature RequestVery LowLowodhcpd: enable IPv6 unicast relayTrunkUnconfirmed Task Description

We want to use Prefix Delegation in a large layer3 mesh network. Currently odhcpd only supports DHCPv6-Relay by forwarding the incoming request to the master interface with multicast all-routers-destination address.

In a mesh network we do not have master/uplink interfaces. But we have the IP of the DHCP server which is X hops away and the routing protocol knows which way to send the packet.

Is it possible to add dhcp relay via unicast? An additional config parameter for the IP of the DHCP server is then also needed.

24.02.2017552Base systemFeature RequestVery LowLowBackup & restore of additionally installed packagesAllUnconfirmed Task Description

There is a discussion and also two different scripts available here:
https://forum.lede-project.org/t/feature-request-for-backup-functionality/603

Is it possible to incorporate some kind of this functionality into the standard distribution to lower the bar for newbies?

Script one:
https://forum.openwrt.org/viewtopic.php?pid=194478#p194478

second:
https://github.com/richb-hanover/OpenWrtScripts/blob/master/config-openwrt.sh

27.02.2017559Base systemFeature RequestVery LowLowNo Ethernet statistics on ag71xxTrunkUnconfirmed Task Description

On WNDR3700v2:

  # ethtool -i eth1 | head -n 2
  driver: ag71xx
  version: 0.5.35
  # ethtool -S eth1
  no stats available

The only statistics available are the ones provided by `ifconfig`, but I’m not sure whether that is accurate — I’m not seeing any drops even under load.

Note that statistics are available on the switch (through `swconfig show`), it’s only the SoC’s interface that’s impacted.

(While I’m at it, the driver is incomplete in other ways — there’s no support for Pause frames or for scatter-gather, although a quick read of the datasheet indicates that it should be possible to implement these features. I’m not sure that’s important, though.)

03.03.2017591OtherFeature RequestVery LowLowInclude branch info in subject from 'lede-commits'AllUnconfirmed Task Description

Please include the branch being committed to as part of the subject. As it currently stands emails are received:

[source] ubox: update to the latest version
[source] bcm53xx: include Broadcom PHY driver in the kernel

However there’s no clue in the subject that the ubox commit is for ‘master’ (and of interest to me) whilst the ‘bcm53xx’ is a commit to ‘17.01’ (and of much less interest to me)

It’s driving me (even more) insane :-)

09.05.2017772PackagesFeature RequestVery LowVery LowAllowing Snort to also block possibly using SnortSamTrunkUnconfirmed Task Description

I noticed that Snort is available from the packages. I wanted to inquire if it would be possible to intergrate dynamic blocking through software such as SnortSam (http://www.snortsam.net/).

pfSence implements a blocking feature with Snort, I’m curious if others may be likewise be interested in this feature being added in to a future release of LEDE.

Thanks

13.05.2017782Base systemFeature RequestVery LowLowRFE : please add package for CANbus device driver "gs_u...TrunkUnconfirmed Task Description

It would be nice to add the CANbus driver : kernel/drivers/net/can/usb/gs_usb

FYI / motivation : there are few new inexpensive USB to CANbus devices that use this driver, such as :

CANable : https://www.tindie.com/products/protofusion/canable-usb-to-can-bus-adapter/ (w/ alt firmware)

candleLight : https://cangaroo.org/candle/light/ , https://github.com/HubertD/candleLight

Schneider : http://schneidersoft.net/resource/gs_usb_1_1_manual.pdf

25.06.2017867Base systemFeature RequestVery LowLowmvebu: Should be split different arches, current (Armad...TrunkUnconfirmed Task Description

The older SoCs such as Armada XP and 370 only supports vfpv3-d16 while 385 and newer does complete vfpv3 and neon. This hampers performance of newer SoCs quite a bit and makes little sense not to split these since we already build vfpv3+neon binaries. While neon-vfpv4 exists, neon-vfpv3 doesn’t and for some reason it’s just called neon in GCC (which translates to arm_cortex-a9_neon in LEDE for this SoC family). Source: https://lists.linaro.org/pipermail/linaro-toolchain/2016-July/005826.html

02.09.2017997WebsiteFeature RequestVery LowLowImplement dark theme (or custom color controls)TrunkUnconfirmed Task Description

regarding website design:
grey text on white background / light blue text on white background

this is a problem in bright viewing environments & LCD panels with poor contrast ratio

Please consider a dark theme option (or custom color controls)


11.09.20171005Base systemFeature RequestVery LowLowsysupgrade should stop network serviceTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of LEDE release, packages, etc.
- Steps to reproduce

 

Applicable to all devices using the generic sysupgrade.

Seen on LEDE head.

To reproduce:

scp over a new .img file

upgrade it as “sysupgrade -v xyzzy.img”

While that’s running, you’ll be able to ping the router, but if you do an http connection to it, it will be reset.

What would be simpler would be doing a “/etc/init.d/network stop” just after killing off all services (including web servers).

This would make it easier to add scripting which auto-detects when the upgrade has completed by reconnecting after a reasonable wait (and retrying as necessary).

11.09.20171006Base systemFeature RequestVery LowLowStart syslog service(s) before network comes upTrunkUnconfirmed Task Description

Not platform specific.

Seen on LEDE head.

There doesn’t seem to be a reason why syslog service can’t be brought up earlier, such as START=12.

Since it typically runs on an unbound socket, adding or deleting interfaces should have no effect.

This would also allow any configuration (network and otherwise) scripts encountering errors to log them.

16.10.20171063ToolchainFeature RequestVery LowLowimagebuilder: show IMAGE_SIZE in `make info`TrunkUnconfirmed Task Description

It would be very handy to know the max image size possible for devices.

Instead of parsing e.g. https://lede-project.org/toh/start manually it would be handy to add this capability to all imagebuilders itself.

A Value of 0 could be used as no limitation (as for x86/64).

06.11.20171153Base systemFeature RequestVery LowHighConsider security monitoring featuresTrunkUnconfirmed Task Description

I see it as email notification about security events.

Examples of security events:

  • Attempts to bruteforce SSH password.
  • Appear unknown MAC’s in network.
  • Deauthentication attacks on Wi-Fi.

Monitoring is very important part of security.

22.11.20171183KernelFeature RequestVery LowLowAdd congestion control for low priority flowsAllUnconfirmed Task Description

Hello,

It would be nice to include package for alternative congestion control mechanisms.

Especially some application can use tcp_lp (low priroriry) to optimise traffic.
Seems a start altought i need to document myself a bit more concerning ledbat state on linux.

Cedric


10.12.20171216Base systemFeature RequestVery LowLowkmod-mwlwifi: Driver update to support 802.11r FTTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: WRT1900AC + WRT1900ACS
- Software versions of LEDE release, packages, etc.: TRUNK

Commit 760f7bf1b8af6c899ccb14d47e8b987ed9a62adf on Nov 6th updated the mwlwifi driver to accept and MDIE Beacon parameter from hostapd. I have compiled this version in the 17.01.4 SDK and been running for roughly a month with no issues. Please update the firmware for the next release, if possible.

https://github.com/kaloz/mwlwifi/commit/760f7bf1b8af6c899ccb14d47e8b987ed9a62adf

If there is anything I can provide to help out, please let know!

27.02.20181394Base systemFeature RequestVery LowLowAdd support for OWE encryptionTrunkUnconfirmed Task Description

The WPA3 standard requires opportunistic wireless encryption (OWE) support (with optional OWE transition) for “open” APs. This is supported by hostapd trunk after enabling CONFIG_OWE and then setting OWE instead of WPA-PSK.

02.03.20181404PackagesFeature RequestVery LowLowRFE : in package "gpsd" init / config : a way to bring ...TrunkUnconfirmed Task Description

FYI, I fixed a build bug in gpsd that allows using gpsd with CANbus / NMEA 2000 : FS#783

Now, it would nice to have a way to initialize the CANbus.

For example, the “8 devices USB2CAN” adapter ( https://www.8devices.com/products/usb2can ) needs :

ip link set can0 type can bitrate 250000

... and the CANable adapter ( http://canable.io/ ) needs :

slcan_attach -w -o -c -s5 /dev/ttyACM0 &

ip link set up slcan0

... after that gpsd can be configured with

gpsd.device=”nmea2000://slcan0”

... and it should work

05.03.20181408Base systemFeature RequestVery LowMediumSeparate device-specific config files in base files & r...AllUnconfirmed Task Description

The redundant config files for other targets in the same arch (e.g. in /etc/diag.sh, /lib/preinit/, /etc/board.d) can take quite a bit of space (a few of kB after sfs, especially for popular archs like ar71xx). Separating config files into board-specific base-files.ipk packages can be very useful for devices with limited flash space.

Also, it will be much helpful to include an option/script in the image builder for auto-removing comments and white-space in all bash and lua files since this will also be much useful for devices with 4MB flash.

07.03.20181415Base systemFeature RequestVery LowVery Low[Enhancement] Consider shorter interface-name prefixesTrunkUnconfirmed Task Description

Given that `IFNAMSIZ` is typically 16, there are 15 characters available for an interface name.

OpenWRT prepends a prefix that can be at least 6 characters `gre4t-` as an example.

If one then creates pseudo/virtual-interfaces using VLAN notation, there are only 4 characters available for configuration

`gre4t-ABCD.1234`

As long as this limitation is known, there is no loss of functionality, only utility in the naming. I would have ideally been able to name my tunnels with a more readable indication of where the other endpoint was, for example `portal1` rather than `gt99`.

At some time in the future, shortening these generated prefixes would be welcome. I acknowledge that this likely impacts only a small fraction of advanced users and a change may impact scripts that rely on the generated name.

 


19.03.20181444KernelFeature RequestVery LowLowActivate CONFIG_ATH9K_HWRNG in Kernel 4.9TrunkUnconfirmed Task Description

Since Linux 4.5, ath9k can be used as a random number generator using ADC register as a source of entropy. It is well-known that insufficient entropy is often a problem on routers and weakens security, using ath9k as a random number generator can greatly boost the available entropy on the routers without the need of additional measures such as haveged.

27.04.20181520Base systemFeature RequestVery LowHighCOMFAST CF-E380AC Switch 'VLAN' FeaturesTrunkUnconfirmed Task Description

Currently on LEDE version: LEDE Reboot 17.01.4 r3560-79f57e422d / LuCI lede-17.01 branch (git-17.290.79498-d3f0685)

There is no Switch feature under LUCI menu Network. In other words, I’d like to create a VLAN tagging from the main router(which already has VLAN Switch capabilities) to be able to have VLAN capabilities for multiple WLAN Virtual Interfaces.

Is it possible to do this for this AP?
thanks

02.05.20181529Base systemFeature RequestVery LowLowPreserve oem firmware in spare partitionTrunkUnconfirmed Task Description

I’ve been having lots of problems with my WRT1200AC router. The 2.4GHz wifi and ethernet are not working, and no amount of reflashing or resetting seems to help. I’d like to try reverting to the Linksys firmware, but I’m finding that’s not working either (https://community.linksys.com/t5/Wireless-Routers/WRT1200AC-flashing-to-Linksys-firmware-from-OpenWRT-kernel-panic/td-p/1307907).

On the DD-WRT forum I’ve learned that a common “trick” is to keep the official firmware on the spare partition permanently, so that it’s always possible to get back to a clean slate. I definitely regret not doing that. But OpenWRT automatically flashes to the opposite partition.

Could this be changed so that LuCI allows the option of choosing which partition gets written to? It could be an “advanced” option. Perhaps with language like:

* Flash to CURRENT partition (”linux2”), leaving existing alternate partition (”linux1”) as recovery partition
* Flash to ALTERNATE partition (”linux1”), and make current OpenWRT partition (”linux2”) the recovery partition

It would be extra nifty to display what’s on the partitions already as well.

18.07.20181670Base systemFeature RequestVery LowLowconsistent naming convention for the imagebuilder.tar.x...AllUnconfirmed Task Description

context

i have a project/script that downloads imagebuilder and builds a custom OpenWRT firmware for any router. the resulting firmware automatically sets up extroot on any external storage.

issue

the URL for the image builder archive is not easily derivable. see this snippet from my script:

IMGBUILDER_NAME="lede-imagebuilder-${RELEASE}-${TARGET_ARCHITECTURE}-${TARGET_VARIANT}.Linux-x86_64"

IMGBUILDERURL="https://downloads.openwrt.org/releases/${RELEASE}/targets/${TARGET_ARCHITECTURE}/${TARGET_VARIANT}/${IMGBUILDER_ARCHIVE}"

it’s easy to calculate the URL for e.g. (ar71xx generic tl-wr1043nd-v2) because ${TARGET_VARIANT} (i.e. ‘generic’) is part of both the dir path and the filename, but not for e.g. (bcm53xx generic dlink-dir-885l), because in the latter case ${TARGET_VARIANT} is part of the directory structure, but not that of the filename itself.

request

please make sure that the imagebuilder URL can be consistently calculated from the (arch, variant, device) triplet, either by eliminating the variant also from the dir structure, or by consistently including it in the file name, too.

04.08.20181735Base systemFeature RequestVery LowLowdeprecate wiki.openwrt.org pages search optimalityTrunkUnconfirmed Task Description

Currently when searching for just about any technical question, the wiki.openwrt.org pages show up in google search before the newer pages that are on the main url. This is confusing and leads to out-of-date information. It should be possible to de-rank without delisting the wiki pages.

https://support.google.com/webmasters/answer/34437


06.08.20181744Base systemFeature RequestVery LowMedium6rd - feature request - support subnetAllUnconfirmed Task Description

Depending on the providers deploying 6rd, there might be some subnet id bits available to the user if all of the first 64 bits of the IPv6 are not used.

In the example attached 64 - 28 - 32 = 4 bits are available to define subnets so the end user can use any network prefix from 2a02:1205:5050:7ab0:: to 2a02:1205:5050:7abf::

Currently the lowest prefix is chosen by default, without opportunity to specify the subnet.

The feature would add a new “subnet” field to 6rd, available through UCI and the UI. Appropriate checks are performed regarding the maximum value of the field given the constraints given by the ip6prefixlen and ip4prefixlen.

Showing tasks 51 - 100 of 1150 Page 2 of 23 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing