OpenWrt/LEDE Project

Welcome to the OpenWrt Project bug reporting and issue tracking system

Problems to be reported here are for the current OpenWrt and legacy LEDE Project’s targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to openwrt-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeveritySummaryReported InStatus  desc
29.01.20181311Base systemBug ReportVery LowHighprocd: mount /tmp with zramTrunkNew Task Description

Supply the following if possible:
- Device problem occurs on all device
- Software versions of OpenWrt/LEDE: Trunk

If i select this option in menuconfig, At the boot procd mount the wrong size of ram. I have 512mb of ram and procd mount only 11mb of ram. More detail here.
http://lists.infradead.org/pipermail/lede-dev/2018-January/011008.html

https://forum.lede-project.org/t/no-space-left-in-tmp/11000/14


17.07.20181664Base systemBug ReportVery LowHighUnable to use wan port (dhcp or static ip is not workin...AllNew Task Description

Device: Belkin F9K1115 v2
Software version: OpenWrt 18.06.0-rc1, LEDE after r3466-f6907dc

Unable to use wan port on any new software version (last known working LEDE version is r3466-f6907dc).
DHCP is not getting ip address. After setting up static ip address there is no network communication.

07.09.20181837Base systemBug ReportMediumMediumKernel oops when using wireguard and mangle/fwmarkopenwrt-19.07New Task Description

On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Ethernet interface being the head-unit connected to a VLAN switch.

Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664463] INFO: rcu_sched self-detected stall on CPU
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664907] 	1-...: (5999 ticks this GP) idle=9ee/140000000000001/0 softirq=961867/961867 fqs=2711
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.665571] 	 (t=6000 jiffies g=358062 c=358061 q=4475)
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.665986] NMI backtrace for cpu 1
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666301] CPU: 1 PID: 14102 Comm: kworker/1:0 Not tainted 4.14.63 #0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666775] Hardware name: XXXXXXXXXX
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667240] Workqueue: wg-crypt-XXXXX 0xffffffffa01dbab0 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667891] Call Trace:
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668145]  <IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668372]  0xffffffff8159c6d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668662]  0xffffffff815a0000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668950]  ? 0xffffffff810418d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669251]  0xffffffff815a0060
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669544]  0xffffffff81041924
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669836]  0xffffffff810c22e3
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670128]  0xffffffff810c176f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670421]  ? 0xffffffff8109fe35
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670720]  ? 0xffffffff810a0062
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671020]  0xffffffff810c432a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671309]  0xffffffff810d0f5e
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671599]  0xffffffff810c4c4f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671892]  0xffffffff810c4df6
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672182]  0xffffffff81602392
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672473]  0xffffffff81601a61
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672760]  </IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672994] RIP: 0010:0xffffffff814e7682
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673327] RSP: 0018:ffffc90000cb3a30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673912] RAX: 00000000000001f8 RBX: ffffc90000cb3af8 RCX: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674426] RDX: ffff880077923e00 RSI: 00000000deb48eb9 RDI: ffff88007aa28e68
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674944] RBP: ffffc90000cb3a80 R08: 0000000000000000 R09: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675456] R10: ffff88007aa28e00 R11: 0000000000000001 R12: ffff880077923e00
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675966] R13: ffffc90000cb3a90 R14: ffff8800786e3a00 R15: ffff88007a360000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676484]  0xffffffff814e7a0a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676773]  0xffffffff814e7d89
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677065]  0xffffffff81532536
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677359]  0xffffffffa01800a7 [iptable_mangle@ffffffffa0180000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677845]  0xffffffff814e2966
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678137]  0xffffffff814ed868
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678430]  ? 0xffffffff814ebed0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678725]  0xffffffff814ed897
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679014]  0xffffffff8152b6bb
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679309]  0xffffffffa002145e [udp_tunnel@ffffffffa0021000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679786]  0xffffffffa01ddf81 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680256]  ? 0xffffffff811038aa
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680555]  ? 0xffffffff810c5454
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680854]  0xffffffffa01dbb5a [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681321]  0xffffffff81091cf4
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681613]  0xffffffff8109204b
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681903]  0xffffffff81096d42
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682191]  ? 0xffffffff81091e40
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682487]  ? 0xffffffff81096c30
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682788]  0xffffffff816001ef

Bootlog:

[    0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Wed Aug 15 20:42:39 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f1b2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f1b3000-0x000000007f1fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f1fb000-0x000000007f314fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f315000-0x000000007f324fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f325000-0x000000007f33bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f344000-0x000000007f358fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f359000-0x000000007f359fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f35a000-0x000000007f377fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f378000-0x000000007f37bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f37c000-0x000000007f38afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f38b000-0x000000007f39bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39c000-0x000000007f39dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f39e000-0x000000007f39efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39f000-0x000000007f3ccfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f3cd000-0x000000007f40ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f410000-0x000000007f58efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f6e5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f6e6000-0x000000007f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Medion E1230/E1230, BIOS 208 02/10/2012
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 write-through
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffffffffff400d10]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[    0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[    0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[    0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[    0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[    0.000000] BRK [0x01e0c000, 0x01e0cfff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MEDION)
[    0.000000] ACPI: XSDT 0x000000007F315070 00005C (v01 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007F3236E8 0000F4 (v04 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007F315158 00E58C (v02 MEDION MEDIONAG 00000001 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000007F390F80 000040
[    0.000000] ACPI: APIC 0x000000007F3237E0 000072 (v03 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: SLIC 0x000000007F323858 000176 (v01 MEDION MEDIONAG 00000001 MSFT 00000001)
[    0.000000] ACPI: ECDT 0x000000007F3239D0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x000000007F323A98 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007F323AD8 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x000000007F323B10 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6effff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f1b2fff]
[    0.000000]   node   0: [mem 0x000000007f410000-0x000000007f58efff]
[    0.000000]   node   0: [mem 0x000000007f6e6000-0x000000007f6effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[    0.000000] On node 0 totalpages: 520921
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 516924 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] random: get_random_bytes called from 0xffffffff81cb0b09 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff88007ee00000 s132056 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s132056 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 512744
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2032612K/2083684K available (8200K kernel code, 527K rwdata, 1312K rodata, 1052K init, 420K bss, 51072K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.040000] tsc: Unable to calibrate against PIT
[    0.040000] tsc: using HPET reference calibration
[    0.040000] tsc: Detected 1595.996 MHz processor
[    0.040000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=15959960)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] ACPI: Core revision 20170728
[    0.068326] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.070105] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.070601] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.071425] Disabled fast string operations
[    0.071787] mce: CPU supports 5 MCE banks
[    0.072125] process: using mwait in idle threads
[    0.072500] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.072914] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.073530] Freeing SMP alternatives memory: 28K
[    0.080265] smpboot: Max logical packages: 2
[    0.081106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.190000] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.190000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.190000] ... version:                3
[    0.190000] ... bit width:              40
[    0.190000] ... generic registers:      2
[    0.190000] ... value mask:             000000ffffffffff
[    0.190000] ... max period:             000000007fffffff
[    0.190000] ... fixed-purpose events:   3
[    0.190000] ... event mask:             0000000700000003
[    0.190000] Hierarchical SRCU implementation.
[    0.190000] smp: Bringing up secondary CPUs ...
[    0.190000] x86: Booting SMP configuration:
[    0.190000] .... node  #0, CPUs:      #1
[    0.010000] Disabled fast string operations
[    0.190000]  #2
[    0.010000] Disabled fast string operations
[    0.190386]  #3
[    0.010000] Disabled fast string operations
[    0.193013] smp: Brought up 1 node, 4 CPUs
[    0.193365] smpboot: Total of 4 processors activated (12767.96 BogoMIPS)
[    0.195434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196180] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.197097] NET: Registered protocol family 16
[    0.198390] cpuidle: using governor ladder
[    0.198390] ACPI: bus type PCI registered
[    0.198390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.200004] PCI: Using configuration type 1 for base access
[    0.217580] ACPI: Added _OSI(Module Device)
[    0.217940] ACPI: Added _OSI(Processor Device)
[    0.218293] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218673] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219086] ACPI: EC: EC started
[    0.219370] ACPI: EC: interrupt blocked
[    0.222270] ACPI: \: Used as first EC
[    0.222591] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.223021] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.223763] ACPI: Executed 1 blocks of module-level executable AML code
[    0.240673] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.242268] ACPI: Dynamic OEM Table Load:
[    0.242613] ACPI: SSDT 0xFFFF88007BD5D800 0002E9 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.246636] ACPI: Dynamic OEM Table Load:
[    0.247070] ACPI: SSDT 0xFFFF88007BC81000 0006DB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.254189] ACPI: Dynamic OEM Table Load:
[    0.256660] ACPI: SSDT 0xFFFF88007C6CB000 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.257695] ACPI: Dynamic OEM Table Load:
[    0.260047] ACPI: SSDT 0xFFFF88007C7DE540 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.264783] ACPI: Interpreter enabled
[    0.265199] ACPI: (supports S0 S5)
[    0.265579] ACPI: Using IOAPIC for interrupt routing
[    0.268058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270580] ACPI: GPE 0x02 active on init
[    0.272964] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.305839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305839] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[    0.305839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.306311] PCI host bridge to bus 0000:00
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.306311] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306721] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[    0.310006] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[    0.310006] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[    0.310006] pci 0000:00:02.0: reg 0x14: [io  0xf100-0xf107]
[    0.315634] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.315634] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[    0.315634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.315960] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.315960] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.316454] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.316454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.316867] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.316867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.317285] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.317285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.317706] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.317706] pci 0000:00:1d.0: reg 0x20: [io  0xf0a0-0xf0bf]
[    0.318128] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.318128] pci 0000:00:1d.1: reg 0x20: [io  0xf080-0xf09f]
[    0.318515] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.318515] pci 0000:00:1d.2: reg 0x20: [io  0xf060-0xf07f]
[    0.318938] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.318938] pci 0000:00:1d.3: reg 0x20: [io  0xf040-0xf05f]
[    0.319336] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.319336] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[    0.319336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.320072] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.320513] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.323112] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.323112] pci 0000:00:1f.2: reg 0x10: [io  0xf0f0-0xf0f7]
[    0.323112] pci 0000:00:1f.2: reg 0x14: [io  0xf0e0-0xf0e3]
[    0.323112] pci 0000:00:1f.2: reg 0x18: [io  0xf0d0-0xf0d7]
[    0.323112] pci 0000:00:1f.2: reg 0x1c: [io  0xf0c0-0xf0c3]
[    0.323112] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf02f]
[    0.323112] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[    0.323112] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.323324] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.324155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.324284] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[    0.324284] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x18: [mem 0xdfe11000-0xdfe11fff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x20: [mem 0xdfe10000-0xdfe10fff 64bit]
[    0.324284] pci 0000:02:00.0: supports D1
[    0.324284] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.324922] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.330068] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.330359] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.330469] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.330614] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[    0.332600] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[    0.333006] pci 0000:03:00.0: supports D1 D2
[    0.333011] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.333210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.333620] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.333630] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.333927] pci 0000:04:00.0: [8086:0896] type 00 class 0x028000
[    0.334057] pci 0000:04:00.0: reg 0x10: [mem 0xdfc00000-0xdfc01fff 64bit]
[    0.334763] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.334942] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.335350] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.335528] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.336039] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.336044] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336049] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336053] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.336057] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.336062] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.336066] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[    0.336070] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.336130] pci_bus 0000:00: on NUMA node 0
[    0.337515] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.338262] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.346039] ACPI: EC: interrupt unblocked
[    0.346039] ACPI: EC: event unblocked
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.348684] SCSI subsystem initialized
[    0.349211] libata version 3.00 loaded.
[    0.349211] ACPI: bus type USB registered
[    0.349789] usbcore: registered new interface driver usbfs
[    0.350039] usbcore: registered new interface driver hub
[    0.350749] usbcore: registered new device driver usb
[    0.351384] PCI: Using ACPI for IRQ routing
[    0.351384] PCI: pci_cache_line_size set to 64 bytes
[    0.351384] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f1b3000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f58f000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[    0.352856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.353253] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.355766] clocksource: Switched to clocksource hpet
[    0.356312] pnp: PnP ACPI init
[    0.357109] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.357615] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.357767] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.358214] system 00:01: [io  0x1000-0x1003] has been reserved
[    0.358667] system 00:01: [io  0x1010-0x101f] has been reserved
[    0.359103] system 00:01: [io  0xffff] has been reserved
[    0.359513] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.359952] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.359952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:02: [io  0x06a0-0x06af] has been reserved
[    0.359952] system 00:02: [io  0x06b0-0x06ff] has been reserved
[    0.359952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.359952] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.359952] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:06: [io  0x025d] has been reserved
[    0.359952] system 00:06: [io  0x025c] has been reserved
[    0.359952] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.360167] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.360645] system 00:06: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.361121] system 00:06: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.361592] system 00:06: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.362072] system 00:06: [mem 0xfec28000-0xfec2ffff] has been reserved
[    0.362553] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.363064] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.363263] pnp 00:07: Plug and Play ACPI device, IDs SYN1d1b SYN1d00 SYN0002 PNP0f13 (active)
[    0.363394] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.363524] system 00:09: [io  0x0240-0x0259] has been reserved
[    0.363991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.364879] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[    0.365372] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.365873] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.366363] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.366857] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367408] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.367898] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.368395] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.368805] system 00:0c: [io  0x0400-0x047f] has been reserved
[    0.369252] system 00:0c: [io  0x0500-0x053f] has been reserved
[    0.369693] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.370228] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.370705] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.371182] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.371676] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[    0.372171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372179] pnp: PnP ACPI: found 13 devices
[    0.380957] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.381648] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.381656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.381662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.381681] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.381688] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.381708] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.381726] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.381733] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.381781] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.382273] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.382870] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.383462] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.384060] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.384646] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.385095] pci 0000:00:1c.1: BAR 7: assigned [io  0x3000-0x3fff]
[    0.385545] pci 0000:00:1c.3: BAR 7: assigned [io  0x4000-0x4fff]
[    0.385998] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.386387] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.386830] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.387314] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.387902] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.388285] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.388736] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.389226] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.389817] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.390233] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.390690] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.391180] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.391775] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.392157] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.392608] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.393098] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.393700] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.394103] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.394108] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.394113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394122] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394126] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394131] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394135] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394140] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.394144] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.394149] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.394153] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.394158] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.394162] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.394166] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.394171] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.394175] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.394179] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.394184] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.394188] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.394193] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.394197] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.394202] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394206] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394210] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394215] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394219] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394224] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394458] NET: Registered protocol family 2
[    0.395149] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.395801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.396424] TCP: Hash tables configured (established 16384 bind 16384)
[    0.397028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.397512] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.398146] NET: Registered protocol family 1
[    0.398540] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.401674] PCI: CLS 64 bytes, default 64
[    0.404203] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    0.408673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.411230] io scheduler noop registered
[    0.411556] io scheduler deadline registered (default)
[    0.412180] gpio_it87: Unknown Chip found, Chip 0202 Revision 2
[    0.413720] hv_vmbus: registering driver hv_pci
[    0.414138] hv_vmbus: registering driver hyperv_fb
[    0.414552] intel_idle: MWAIT substates: 0x3020220
[    0.414554] intel_idle: v0.4.1 model 0x36
[    0.415019] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.415333] ACPI: AC Adapter [AC0] (on-line)
[    0.440589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.470262] ACPI: Lid Switch [LID]
[    0.470749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.471442] ACPI: Sleep Button [SLPB]
[    0.471890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.472528] ACPI: Power Button [PWRF]
[    0.474911] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.475996] thermal LNXTHERM:00: registered as thermal_zone0
[    0.476418] ACPI: Thermal Zone [THRM] (63 C)
[    0.477238] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.480090] Non-volatile memory driver v1.3
[    0.483829] loop: module loaded
[    0.484309] Guest personality initialized and is inactive
[    0.484904] VMCI host device registered (name=vmci, major=10, minor=63)
[    0.485403] Initialized host personality
[    0.485993] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[    0.487067] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[    0.488126] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170728/utaddress-247)
[    0.489188] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20170728/utaddress-247)
[    0.490317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.VGA.TCOI) (20170728/utaddress-247)
[    0.491442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.492164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.493231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.495362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.496081] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.497151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.498214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.498935] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.499659] VMware PVSCSI driver - version 1.0.7.0-k
[    0.500186] hv_vmbus: registering driver hv_storvsc
[    0.500738] ahci 0000:00:1f.2: version 3.0
[    0.501106] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.501649] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.502258] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
[    0.504418] scsi host0: ahci
[    0.505055] scsi host1: ahci
[    0.505678] scsi host2: ahci
[    0.506330] scsi host3: ahci
[    0.506778] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[    0.507357] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[    0.507918] ata3: DUMMY
[    0.508159] ata4: DUMMY
[    0.508915] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[    0.509469] hv_vmbus: registering driver hv_netvsc
[    0.509854] Fusion MPT base driver 3.04.20
[    0.510250] Copyright (c) 1999-2008 LSI Corporation
[    0.510709] Fusion MPT SPI Host driver 3.04.20
[    0.511120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.511607] ehci-pci: EHCI PCI platform driver
[    0.512763] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.513192] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.513793] ehci-pci 0000:00:1d.7: debug port 1
[    0.514113] ACPI: Battery Slot [BAT0] (battery present)
[    0.518488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.518522] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[    0.540123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.541063] hub 1-0:1.0: USB hub found
[    0.541418] hub 1-0:1.0: 8 ports detected
[    0.542734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.543221] ohci-pci: OHCI PCI platform driver
[    0.543620] ohci-platform: OHCI generic platform driver
[    0.544568] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.544990] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.546233] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010
[    0.547982] hub 2-0:1.0: USB hub found
[    0.548435] hub 2-0:1.0: 2 ports detected
[    0.549241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.549668] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.550303] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    0.550935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.551899] hub 3-0:1.0: USB hub found
[    0.552349] hub 3-0:1.0: 2 ports detected
[    0.553301] usbcore: registered new interface driver usb-storage
[    0.553955] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.556563] i8042: Detected active multiplexing controller, rev 1.1
[    0.559170] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.559568] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.559965] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.560407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.560808] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.561255] hv_vmbus: registering driver hyperv_keyboard
[    0.561774] rtc_cmos 00:03: RTC can wake from S4
[    0.562370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.562869] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.564393] sdhci: Secure Digital Host Controller Interface driver
[    0.564865] sdhci: Copyright(c) Pierre Ossman
[    0.566006] hidraw: raw HID events driver (C) Jiri Kosina
[    0.566486] hv_vmbus: registering driver hid_hyperv
[    0.566915] usbcore: registered new interface driver usbhid
[    0.567337] usbhid: USB HID core driver
[    0.567684] hv_utils: Registering HyperV Utility Driver
[    0.568088] hv_vmbus: registering driver hv_util
[    0.568454] hv_vmbus: registering driver hv_balloon
[    0.569382] NET: Registered protocol family 10
[    0.570351] Segment Routing with IPv6
[    0.570715] NET: Registered protocol family 17
[    0.571097] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.571999] 8021q: 802.1Q VLAN Support v1.8
[    0.572509] NET: Registered protocol family 40
[    0.573685] microcode: sig=0x30661, pf=0x8, revision=0x10c
[    0.574234] microcode: Microcode Update Driver: v2.2.
[    0.574273] sched_clock: Marking stable (573441123, 0)->(657968060, -84526937)
[    0.575503] registered taskstats version 1
[    0.576740] rtc_cmos 00:03: setting system clock to 2018-09-07 16:15:12 UTC (1536336912)
[    0.584900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.831528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.834278] ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
[    0.834837] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.837583] ata1.00: configured for UDMA/133
[    0.838642] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5
[    0.841240] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.841885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.842433] sd 0:0:0:0: [sda] Write Protect is off
[    0.842862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.843052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.877982]  sda: sda1 sda2
[    0.880409] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.171549] ata2: SATA link down (SStatus 0 SControl 300)
[    1.186977] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[    1.194364] Freeing unused kernel memory: 1052K
[    1.230632] Write protecting the kernel read-only data: 12288k
[    1.235448] Freeing unused kernel memory: 2024K
[    1.252890] Freeing unused kernel memory: 736K
[    1.487895] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[    1.488460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[    1.566812] init: Console is alive
[    1.796421] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    1.821964] pps_core: LinuxPPS API ver. 1 registered
[    1.822364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.823647] PTP clock support registered
[    1.824343] Button Hotplug driver version 0.4.1
[    1.824818] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    1.830753] init: - preinit -
[    1.890124] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.267747] random: jshn: uninitialized urandom read (4 bytes read)
[    2.309827] random: jshn: uninitialized urandom read (4 bytes read)
[    2.316834] random: jshn: uninitialized urandom read (4 bytes read)
[    2.470351] usb 1-7: new high-speed USB device number 4 using ehci-pci
[    2.490506] clocksource: Switched to clocksource tsc
[    2.691721] usb-storage 1-7:1.0: USB Mass Storage device detected
[    2.692832] scsi host4: usb-storage 1-7:1.0
[    3.754161] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.765748] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.433172] urandom_read: 5 callbacks suppressed
[    5.433177] random: jshn: uninitialized urandom read (4 bytes read)
[    5.722679] F2FS-fs (loop0): Mounted with checkpoint version = 1a030d9d
[    5.751832] mount_root: switching to f2fs overlay
[    5.833723] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    5.839672] urandom-seed: Seeding with /etc/urandom.seed
[    5.914891] procd: - early -
[    6.557234] procd: - ubus -
[    6.596946] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.610617] procd: - init -
[    6.950178] kmodloader: loading kernel modules from /etc/modules.d/*
[    6.954303] tun: Universal TUN/TAP device driver, 1.6
[    6.958028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.958547] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.961325] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    6.961834] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.964069] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.426558] Netfilter messages via NETLINK v0.30.
[    7.428839] ip_set: protocol 6
[    7.450984] i2c /dev entries driver
[    7.487885] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    7.488578] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    7.492106] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.492562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.494282] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.898600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.147745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.149259] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000000b000, e8:40:f2:3f:a9:58, XID 00a00000 IRQ 30
[    8.154185] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[    8.155901] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    8.174092] xt_time: kernel timezone is -0000
[    8.411155] Intel(R) Wireless WiFi driver for Linux
[    8.411610] Copyright(c) 2003- 2015 Intel Corporation
[    8.445655] PPP generic driver version 2.4.2
[    8.447497] NET: Registered protocol family 24
[    8.454488] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    8.455168] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUG disabled
[    8.455610] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
[    8.456054] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
[    8.456529] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[    8.501089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.504079] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.792405] r8169 0000:03:00.0 eth0: link down
[   11.792453] r8169 0000:03:00.0 eth0: link down
[   11.903937] random: fast init done
[   13.415479] r8169 0000:03:00.0 eth0: link up
[   30.131354] random: crng init done
18.11.20181958PackagesBug ReportMediumLowuqmi: unicode characters in SMS confuse uqmiTrunkNew Task Description

When using uqmi –get-message the message ends up truncated in case it contains unicode characters like german umlauts.

10.03.20192176KernelBug ReportMediumHighubiquiti loco xw (AR9342 Rev.2) stops receiving on wire...AllNew Task Description

This bug has been existing as long as the ubiquiti loco xw 5 ghz hardware is around, probably what we are dealing with is a hardware bug in the AR9342 Rev. 2 chip. It is somehow hard to reproduce, but it hits us reliable every couple of hours, sometimes days, running any version of OpenWrt up to todays master branch. It just happened again and this time I decided to check if the bug is actually listed on FS – in addition to creating the usual cron-job executing `iw dev wlan0 scan` every minute. There is even a watchdog in the community libremesh repository designed to catch exactly this bug:
https://github.com/libremesh/lime-packages/blob/master/packages/cotonete/Makefile#L21

So to run into it, here we got 2 ubiquiti nanobeam m5 devices running OpenWrt ar71xx/generic loco-m-xw pointing at each other over a distance of roughly 2km. This link is acceptable, but not perfect and slightly asymmetric.

Device A (worse RX SNR):

Station f0:9f:c2:xx:xx:7a (on wlan0-mesh)
	inactive time:	0 ms
	rx bytes:	1433997029
	rx packets:	8589913
	tx bytes:	23160025785
	tx packets:	15667682
	tx retries:	677924
	tx failed:	0
	rx drop misc:	30076
	signal:  	-76 [-79, -79] dBm
	signal avg:	-74 [-77, -77] dBm
	Toffset:	4887897799 us
	tx bitrate:	43.3 MBit/s MCS 10 short GI
	rx bitrate:	43.3 MBit/s MCS 4 short GI
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18117 seconds

Device B (better RX SNR)

Station fc:ec:da:xx:xx:8c (on wlan0-mesh)
	inactive time:	20 ms
	rx bytes:	23442553203
	rx packets:	16047526
	tx bytes:	1274688573
	tx packets:	8251479
	tx retries:	1337700
	tx failed:	2932
	rx drop misc:	45195
	signal:  	-72 [-79, -73] dBm
	signal avg:	-71 [-78, -73] dBm
	Toffset:	18446744068821653812 us
	tx bitrate:	57.8 MBit/s MCS 11 short GI
	rx bitrate:	43.3 MBit/s MCS 10 short GI
	last ack signal:24 dBm
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18179 seconds

Now it so happens that device A (and always only device A!) becomes deaf after some hours of mostly sending lots of traffic to device B. It will continue to send beacons, but loose all associations. device B will keep trying setting up a link, but it keeps ending up in ‘BLOCKED’ state and dumps using a monitor mode interface show that device A simply doesn’t react at all to any of the frames send by device B. A simple `iw dev wlan0 scan` on device A (which doesn’t give any results) fixes the problem.

The channel seems rather unused otherwise and signal quality only varies by weather conditions. Interestingly this seems to happen on non-DFS channels only. And it happens on Ad-Hoc mode (unencrypted, never tried encrypted) and 802.11s (open ie. setup via `iw` tool as well as with SAE ie. running `wpa_supplicant`) equally. It doesn’t happen on all nodes, but only on those with rather bad signal or at least one far-off neighbor.

Maybe related to FS#1246

I saw this occuring on ubnt nanostation loco m5 XW as well as on all nanobeam m5 variants (which is supposedly compatible with the loco-m-xw image).

ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47

WiFi EEPROM of the devices:

*
00001000  02 02 F0 9F C2 XX XX XX  00 30 3a 31 35 3a 36 64  |.....XXX.0:15:6d|
00001010  3a 64 64 3a 64 65 3a 61  64 00 00 00 00 00 1f 00  |:dd:de:ad.......|
00001020  33 01 00 00 00 00 04 00  00 00 2d 04 03 00 08 ff  |3.........-.....|
00001030  20 01 00 00 00 20 02 00  00 cc cc 0c 00 50 01 50  | .... .......P.P|
00001040  01 50 01 00 00 00 00 00  00 21 00 a4 00 00 00 00  |.P.......!......|
00001050  ff 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001060  0e 0e 03 00 2c e2 00 02  0e 1c e0 e0 00 0c e0 e0  |....,...........|
00001070  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001080  00 00 00 00 00 00 00 00  00 00 70 89 ac 00 00 00  |..........p.....|
00001090  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000010c0  00 00 00 70 ac 70 89 ac  70 89 ac 70 89 ac 22 22  |...p.p..p..p..""|
000010d0  22 22 22 22 22 22 22 22  20 1c 22 22 20 1c 22 22  |"""""""" ."" .""|
000010e0  20 1c 24 24 20 18 16 14  20 16 14 12 20 20 1c 14  | .$$ ... ...  ..|
000010f0  24 24 20 18 16 14 20 16  14 12 20 20 1c 14 24 24  |$$ ... ...  ..$$|
00001100  20 18 16 14 20 16 14 12  20 20 1c 14 22 22 1e 16  | ... ...  ..""..|
00001110  14 12 1e 14 12 10 20 20  1c 14 22 22 1e 16 14 12  |......  ..""....|
00001120  1e 14 12 10 20 20 1c 14  22 22 1e 16 14 12 1e 14  |....  ..""......|
00001130  12 10 20 20 1c 14 11 12  15 17 41 42 45 47 31 32  |..  ......ABEG12|
00001140  35 37 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |57pu..pu..pu..pu|
00001150  ac b8 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |..pu..pu..pu..pu|
*
00001170  ac b8 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |..<|<|<|<|<|<|<||
00001180  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
000011a0  3c 7c 10 01 00 00 22 22  02 00 00 00 00 00 00 00  |<|....""........|
000011b0  00 00 00 00 00 00 44 00  00 00 00 00 00 ff 00 00  |......D.........|
000011c0  00 00 00 00 00 00 00 00  00 00 00 00 ff 0e 0e 03  |................|
000011d0  00 2d e2 00 02 0e 1c 00  00 00 00 00 00 00 00 00  |.-..............|
000011e0  00 00 00 00 00 00 00 00  00 44 44 00 00 00 00 00  |.........DD.....|
000011f0  00 00 00 00 00 00 00 4c  58 68 8c a4 b4 bd cd d9  |.......LXh......|
00001200  00 89 00 00 00 dc 00 89  00 00 00 e0 00 8a 00 00  |................|
00001210  00 e2 00 8b 00 00 00 de  00 8b 00 00 00 de 00 8b  |................|
00001220  00 00 00 dc 00 89 00 00  00 da 00 8b 00 00 00 e0  |................|
00001230  00 89 00 00 00 e4 00 8a  00 00 00 e7 00 8b 00 00  |................|
00001240  00 e6 00 8b 00 00 00 e2  00 8c 00 00 00 e1 00 8c  |................|
00001250  00 00 00 df 00 8b 00 00  00 dd 00 8b 00 00 00 00  |................|
00001260  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00001280  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 4c  |...............L|
00001290  54 68 78 8c a0 b4 c5 4c  54 68 78 8c a0 b4 c5 4c  |Thx....LThx....L|
000012a0  54 68 78 8c a0 b4 c5 26  20 1e 1c 26 20 1e 1c 26  |Thx....& ..& ..&|
000012b0  20 1e 1c 26 20 1e 1c 26  20 1e 1c 26 20 1e 1c 26  | ..& ..& ..& ..&|
000012c0  20 1e 1c 26 20 1e 1c 26  22 20 1e 1c 1a 20 1e 1c  | ..& ..&" ... ..|
000012d0  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
000012e0  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
000012f0  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001300  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001310  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001320  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
00001330  1e 1c 1a 00 00 00 00 26  22 20 1e 1c 1a 20 1e 1c  |.......&" ... ..|
00001340  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
00001350  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
00001360  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001370  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001380  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001390  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
000013a0  1e 1c 1a 00 00 00 00 10  16 18 40 46 48 30 36 38  |..........@FH068|
000013b0  4c 54 68 78 8c a0 b9 cd  4c 54 68 78 8c a0 b9 cd  |LThx....LThx....|
*
000013f0  4c 54 68 78 8c a0 b9 cd  3c 7c 3c 7c 3c 7c 3c 7c  |LThx....<|<|<|<||
00001400  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
00001440  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
18.06.20192328Base systemBug ReportLowMediumAllocate resources to sort out odhcpd/dnsmasq interacti...TrunkNew Task Description

As IPv6 is being adopted, increasingly people are seeing dnsmasq log ‘spam’. See https://bugs.openwrt.org/index.php?do=details&task_id=1492&string=1492&search_name=&type%5B0%5D=&sev%5B0%5D=&pri%5B0%5D=&due%5B0%5D=&reported%5B0%5D=&cat%5B0%5D=&status%5B0%5D=open&percent%5B0%5D=&opened=&dev=&closed=&duedatefrom=&duedateto=&changedfrom=&changedto=&openedfrom=&openedto=&closedfrom=&closedto=

By default under openwrt, dhcpv4 leases are handled by dnsmasq whilst dhcpv6/RA is handled by openwrt’s odhcpd.

odhcpd could handle both v4 & v6 but does not yet have the same configuration flexibility for dhcp options as dnsmasq. I guess this is why no one has been brave enough to switch to odhcpd for ipv4 operations as well as ipv6.

dnsmasq can also handle dhcpv6/RA but not quite as flexibly as odhcpd. dnsmasq will automatically find IP6 prefixes on interfaces and start handling them, whilst openwrt’s strategy with odhcpd is to only handle stuff we tell you to handle, don’t do it automagically.

As dnsmasq is the default resolver for openwrt and the wider LAN, it needs to know about DHCP/hostname allocations. For DHCPv4 this is easy, dnsmasq is controlling them. For DHCPv6 a hosts file (called a statefile in the odhcpd code) is handed to dnsmasq.

By default this host file is not read dynamically, so odhcpd has to signal dnsmasq to re-read the host file (and clear caches etc etc) upon every ipv6 lease change.

This generates a lot of log spam and process startup overhead. There are also questions about service operability during this time.

Effort needs to be put into sorting this out.

Temporary workarounds:

Use ‘hostsdir’ dnsmasq option instead of ‘addn-hosts’ - dnsmasq will dynamically scan changes/additions to hosts in hostsdir whereas addn-hosts needs a SIGHUP. Host deletions cannot be handled by this method, so odhcpd would still need to SIGHUP on lease expiry. It might reduce some of the spam.

Longer term:

Teach dnsmasq to accept hostname updates over an IPC mechanism. ubus? and carry on using odhcpd for ipv6.

Teach dnsmasq to handle ipv6 prefix additions/deletions/handling via an IPC mechanism in the same way as odhcpd. Drop odhcpd and use dnsmasq for everything.

Use odhcpd for everything and use another dns resolver that interfaces nicely with odhcpd.

Why don’t I see this problem: I use dnsmasq to handle ipv6 but I’m lucky enough that this works for me.

This needs fixing/funding to sort it out though.

15.09.20192495Base systemBug ReportVery LowLowucert rebuild within SDK segfaults on Debian 10 and Ubu...TrunkNew Task Description

Using the 19.07-SNAPSHOT SDK build Sept 12 (last successful build by the buildbots it looks like), and current openwrt-19.07 branch on the feeds, if doing signed build, the build fails due to ucert segfaulting (this is on Debian 10).

ldd staging_dir/host/bin/ucert shows:

      linux-vdso.so.1 (0x00007ffd03d63000)
      libubox.so => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libubox.so (0x00007ff0db3b0000)
      libblobmsg_json.so => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libblobmsg_json.so (0x00007ff0db3a8000)
      libjson-c.so.2 => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libjson-c.so.2 (0x00007ff0db398000)
      libc.so.6 => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libc.so.6 (0x00007ff0daff8000)
      /lib64/ld-linux-x86-64.so.2 (0x00007ff0db3c8000)

I’m wondering if the problem is due to using host instead SDK libraries.


09.10.20192541KernelBug ReportMediumLowHardware offloading causes some flows to fail to be NAT...openwrt-19.07New Task Description

Just after a reboot, some flows are not NATed: packets from a machine in the LAN are sent to the WAN port with a private source IP address.

This is on a Linksys RE6500 (ramips mt7621) running openwrt 19.07-SNAPSHOT r10578-b3d70f628.
It is configured with flow_offloading and flow_offloading_hw.

Here is a tcpdump capture showing the problem on the WAN port (172.23.184.0/24 is my LAN address space):

root@openwrt:~# tcpdump -n -i eth0.20 net 172.23.184.0/24
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0.20, link-type EN10MB (Ethernet), capture size 262144 bytes
18:51:21.756552 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 112
18:51:22.651556 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148
18:51:26.681032 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 768
18:51:27.771654 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148

Here is what conntrack -L says:

udp      17 55 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=93 bytes=20412 [UNREPLIED] src=91.224.XX.YY dst=172.23.184.119 sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Notice the second dst= that shows the private IP address of the LAN machine.

After restarting the firewall, the flow is correctly NAT-ed and conntrack -L shows the correct entry (193.33.ZZ.WW is my public IP address):

udp      17 175 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=4 bytes=704 [UNREPLIED] src=91.224.XX.YY dst=193.33.ZZ.WW sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Note: when I only enable flow_offloading, the issue does not appear anymore, so this really seems to be an issue with the hw offloading integration in the firewall.

21.12.20192690Base systemBug ReportMediumMediumImagebuilder: "opkg_install_pkg: Package size mismatch"...AllNew Task Description

The Imagebuilder fails in the following situation:

  • download and unpack the imagebuilder
  • build an image: it works
  • wait a few days/weeks
  • try to build an image again with the same imagebuilder: it fails

It fails quite late during building with lots of errors like this:

   opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   opkg_install_cmd: Cannot install package luci.
   opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   opkg_install_cmd: Cannot install package base-files.
   opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   opkg_install_cmd: Cannot install package busybox.

This happens with stable releases (18.06.5), RC releases (19.07.0-rc2), and with several targets.

It looks like package sizes are somehow kept in a local cache during the first build, and are not updated when building again a few days later. This is strange because the imagebuilder seems to fetch new versions of the Packages.gz files.

Below is the full log.

  $ make image PROFILE=rb-nor-flash-16M"" BIN_DIR="${IMAGEBUILDER_DIR}" EXTRA_IMAGE_NAME="rzn" FILES="files/" PACKAGES="luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr -ppp -ppp-mod-pppoe -kmod-ppp -kmod-pppoe -kmod-pppox"
  
  Building images for ar71xx - MikroTik RouterBoard (16 MB SPI NOR)
  Packages: luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr base-files busybox dnsmasq dropbear firewall fstools ip6tables iptables kernel kmod-ath9k kmod-gpio-button-hotplug kmod-ledtrig-gpio libc libgcc logd mtd netifd odhcp6c odhcpd-ipv6only opkg rbcfg rssileds swconfig uboot-envtools uci uclient-fetch wpad-mini
  
  Downloading http://downloads.openwrt.org/releases/18.06.5/targets/ar71xx/mikrotik/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_core
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/base/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_base
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_luci
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_packages
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/routing/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_routing
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/telephony/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_telephony
  Downloading file:packages/Packages
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/imagebuilder
  
  Installing packages...
  Installing libc (1.1.19-2) to root...
  Installing libgcc (7.3.0-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libgcc_7.3.0-2_mips_24kc.ipk.
  Configuring libgcc.
  Configuring libc.
  Installing kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) to root...
  Configuring kernel.
  Installing luci (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci_git-19.353.67991-868abc1-1_all.ipk
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libubox_2018-07-25-c83a84af-2_mips_24kc.ipk.
  Installing luci-mod-admin-full (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-mod-admin-full_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-en (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-en_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-base (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-base_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-i18n-firewall-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-firewall-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-app-firewall (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-app-firewall_git-19.353.67991-868abc1-1_all.ipk
  Installing base-files (194.2-r7897-9d401013fc) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/base-files_194.2-r7897-9d401013fc_mips_24kc.ipk.
  Installing libuci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libuci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing busybox (1.28.4-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/busybox_1.28.4-3_mips_24kc.ipk.
  Installing dnsmasq (2.80-1.4) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dnsmasq_2.80-1.4_mips_24kc.ipk.
  Installing dropbear (2017.75-7.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dropbear_2017.75-7.1_mips_24kc.ipk.
  Installing firewall (2018-08-13-1c4d5bcd-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/firewall_2018-08-13-1c4d5bcd-1_mips_24kc.ipk.
  Installing fstools (2019-03-28-ff1ded63-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/fstools_2019-03-28-ff1ded63-5_mips_24kc.ipk.
  Installing ip6tables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/ip6tables_1.6.2-3_mips_24kc.ipk.
  Installing kmod-nf-reject6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-reject6_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt6_4.9.198-1_mips_24kc.ipk
  Installing kmod-ipt-core (4.9.198-1) to root...
  Downloading file:packages/kmod-ipt-core_4.9.198-1_mips_24kc.ipk
  Installing kmod-ip6tables (4.9.198-1) to root...
  Downloading file:packages/kmod-ip6tables_4.9.198-1_mips_24kc.ipk
  Installing libip4tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip4tc_1.6.2-3_mips_24kc.ipk.
  Installing libip6tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip6tc_1.6.2-3_mips_24kc.ipk.
  Installing libxtables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libxtables_1.6.2-3_mips_24kc.ipk.
  Installing iptables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/iptables_1.6.2-3_mips_24kc.ipk.
  Package iptables (1.6.2-3) installed in root is up to date.
  Package kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) installed in root is up to date.
  Installing kmod-ath9k (4.9.198+2017-11-01-10) to root...
  Downloading file:packages/kmod-ath9k_4.9.198%2b2017-11-01-10_mips_24kc.ipk
  Installing libnl-tiny (0.1-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libnl-tiny_0.1-5_mips_24kc.ipk.
  Installing kmod-gpio-button-hotplug (4.9.198-2) to root...
  Downloading file:packages/kmod-gpio-button-hotplug_4.9.198-2_mips_24kc.ipk
  Installing kmod-ledtrig-gpio (4.9.198-1) to root...
  Downloading file:packages/kmod-ledtrig-gpio_4.9.198-1_mips_24kc.ipk
  Package libc (1.1.19-2) installed in root is up to date.
  Package libgcc (7.3.0-2) installed in root is up to date.
  Installing logd (2018-02-14-128bc35f-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/logd_2018-02-14-128bc35f-2_mips_24kc.ipk.
  Installing mtd (23) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/mtd_23_mips_24kc.ipk.
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Installing netifd (2019-01-31-a2aba5c7-2.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/netifd_2019-01-31-a2aba5c7-2.1_mips_24kc.ipk.
  Installing odhcp6c (2018-07-14-67ae6a71-15) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcp6c_2018-07-14-67ae6a71-15_mips_24kc.ipk.
  Installing odhcpd-ipv6only (1.15-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcpd-ipv6only_1.15-3_mips_24kc.ipk.
  Installing opkg (2019-06-14-dcbc142e-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/opkg_2019-06-14-dcbc142e-1_mips_24kc.ipk.
  Installing rbcfg (2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rbcfg_2_mips_24kc.ipk.
  Installing rssileds (0.2-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rssileds_0.2-1_mips_24kc.ipk.
  Installing swconfig (11) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/swconfig_11_mips_24kc.ipk.
  Installing uboot-envtools (2018.03-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uboot-envtools_2018.03-1_mips_24kc.ipk.
  Installing uci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing uclient-fetch (2018-11-24-3ba74ebc-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uclient-fetch_2018-11-24-3ba74ebc-1_mips_24kc.ipk.
  Installing wpad-mini (2018-05-21-62566bc2-8) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/wpad-mini_2018-05-21-62566bc2-8_mips_24kc.ipk.
  Configuring kmod-nf-reject6.
  Configuring uboot-envtools.
  Configuring kmod-ledtrig-gpio.
  Configuring rbcfg.
  Configuring luci-app-firewall.
  Configuring kmod-nf-ipt.
  Configuring libxtables.
  Configuring libip4tc.
  Configuring kmod-nf-ipt6.
  Configuring kmod-ipt-core.
  Configuring kmod-ip6tables.
  Configuring fstools.
  Configuring libip6tc.
  Configuring luci-base.
  Configuring luci-mod-admin-full.
  Configuring kmod-gpio-button-hotplug.
  Configuring luci-i18n-firewall-fr.
  Configuring iptables.
  Configuring ip6tables.
  Configuring luci-i18n-base-en.
  Configuring luci-i18n-base-fr.
  Collected errors:
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package luci.
   * opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   * opkg_install_cmd: Cannot install package base-files.
   * opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   * opkg_install_cmd: Cannot install package busybox.
   * opkg_install_pkg: Package size mismatch: dnsmasq is 99783 bytes, expecting 99775 bytes
   * opkg_install_cmd: Cannot install package dnsmasq.
   * opkg_install_pkg: Package size mismatch: dropbear is 86613 bytes, expecting 86610 bytes
   * opkg_install_cmd: Cannot install package dropbear.
   * opkg_install_pkg: Package size mismatch: firewall is 40776 bytes, expecting 40777 bytes
   * opkg_install_cmd: Cannot install package firewall.
   * opkg_install_pkg: Package size mismatch: libnl-tiny is 12953 bytes, expecting 12948 bytes
   * opkg_install_cmd: Cannot install package kmod-ath9k.
   * opkg_install_pkg: Package size mismatch: logd is 10114 bytes, expecting 10111 bytes
   * opkg_install_cmd: Cannot install package logd.
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package mtd.
   * opkg_install_pkg: Package size mismatch: netifd is 62005 bytes, expecting 62004 bytes
   * opkg_install_cmd: Cannot install package netifd.
   * opkg_install_pkg: Package size mismatch: odhcp6c is 23650 bytes, expecting 23646 bytes
   * opkg_install_cmd: Cannot install package odhcp6c.
   * opkg_install_pkg: Package size mismatch: odhcpd-ipv6only is 28830 bytes, expecting 28845 bytes
   * opkg_install_cmd: Cannot install package odhcpd-ipv6only.
   * opkg_install_pkg: Package size mismatch: opkg is 58890 bytes, expecting 58895 bytes
   * opkg_install_cmd: Cannot install package opkg.
   * opkg_install_pkg: Package size mismatch: rssileds is 4056 bytes, expecting 4059 bytes
   * opkg_install_cmd: Cannot install package rssileds.
   * opkg_install_pkg: Package size mismatch: swconfig is 9478 bytes, expecting 9484 bytes
   * opkg_install_cmd: Cannot install package swconfig.
   * opkg_install_pkg: Package size mismatch: uci is 7267 bytes, expecting 7262 bytes
   * opkg_install_cmd: Cannot install package uci.
   * opkg_install_pkg: Package size mismatch: uclient-fetch is 7489 bytes, expecting 7485 bytes
   * opkg_install_cmd: Cannot install package uclient-fetch.
   * opkg_install_pkg: Package size mismatch: wpad-mini is 258733 bytes, expecting 258725 bytes
   * opkg_install_cmd: Cannot install package wpad-mini.
  make[2]: *** [Makefile:153: package_install] Error 255
  make[1]: *** [Makefile:114: _call_image] Error 2
  make: *** [Makefile:193: image] Error 2
26.12.20192695KernelBug ReportVery LowCriticalKernel panic during boot on Gehua ghl-r-001TrunkNew Task Description

See https://github.com/openwrt/openwrt/pull/2483

without this patch the ghl-r-001 cannot be boot.

reproduct in both 19.7-rc2 and git master.

29.01.20202781Base systemBug ReportLowMediumArcher C50 v4 Mac80211 Looses Internet Access after 20’...openwrt-19.07New Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Problem Device:
TP-Link Archer C50 (Canadian) v4 + v4.2

Software version:
openwrt 19.07 r10860, default packages versions.

Steps to reproduce:
Setup wireless like below. I’ve intentionally left encryption set to “none” for both radio’s for quick testing but i’ve tested with WPA2 CCMP encryption with no change in results.

config wifi-device ‘radio0’ option type ‘mac80211’ option channel ‘11’ option hwmode ‘11g’ option path ‘platform/10300000.wmac’ option htmode ‘HT20’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio0’ option device ‘radio0’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

config wifi-device ‘radio1’ option type ‘mac80211’ option hwmode ‘11a’ option path ‘pci0000:00/0000:00:00.0/0000:01:00.0’ option htmode ‘VHT80’ option channel ‘112’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio1’ option device ‘radio1’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

Alternative Settings:

htmode ‘HT40’ No change in results
channel ‘1’, ‘6’, ‘11’ No change in results
disassoc_low_ack ‘0’ No change in results

25.02.20202856Base systemBug ReportVery LowHighWifi "dies" (hostapd drops all clients) on some ar71xx ...openwrt-19.07New Task Description

This issue is very strange, i don’t even know if it’s just faulty hardware but i have it happening on multiple devices now

Most affected hardware

  • Nanobridge M5 , in this case transmitting enough data can trigger it almost instantly
  • TL-WR841ND , in this case i had it happen like 3-4 times a year
  • CPE 210 v3 , in this case it happens like each week

For the last one, which is running 19.07 i found on the system log

Tue Feb 25 07:38:58 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED [redacted mac1]
Tue Feb 25 07:38:58 2020 daemon.info hostapd: wlan0: STA [redacted mac1] IEEE 802.11: disassociated due to inactivity
Tue Feb 25 07:38:59 2020 daemon.info hostapd: wlan0: STA [redacted mac1] IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Feb 25 07:41:32 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED [redacted mac2]
Tue Feb 25 07:41:32 2020 daemon.info hostapd: wlan0: STA [redacted mac2] IEEE 802.11: disassociated due to inactivity
Tue Feb 25 07:41:33 2020 daemon.info hostapd: wlan0: STA [redacted mac2] IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Feb 25 07:42:49 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 07:49:55 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 07:55:02 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:00:15 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:05:25 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:10:44 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:16:00 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
08.05.20203070Base systemBug ReportMediumLowkmod-cryptodev: WARNING: possible circular locking depe...TrunkNew Task Description

OpenWrt master r13174-73fa1aba94 on octeon with kernel 5.4

[   70.971145] 
[   70.972662] ======================================================
[   70.978843] WARNING: possible circular locking dependency detected
[   70.985029] 5.4.39 #0 Not tainted
[   70.988348] ------------------------------------------------------
[   70.994531] unbound/2895 is trying to acquire lock:
[   70.999414] 800000041baeb868 (&pcr->fcrypt.sem){+.+.}, at: crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.009267] 
[   71.009267] but task is already holding lock:
[   71.015103] 800000041b911468 (&ses_new->sem){+.+.}, at: crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.024691] 
[   71.024691] which lock already depends on the new lock.
[   71.024691] 
[   71.032866] 
[   71.032866] the existing dependency chain (in reverse order) is:
[   71.040347] 
[   71.040347] -> #1 (&ses_new->sem){+.+.}:
[   71.045773]        lock_acquire+0xe0/0x220
[   71.049888]        __mutex_lock+0x94/0x628
[   71.054001]        crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.060365]        crypto_get_session_by_sid+0x1e4/0x12b8 [cryptodev]
[   71.066806]
[   71.066806] -> #0 (&pcr->fcrypt.sem){+.+.}:
[   71.072485]        check_noncircular+0x1a8/0x260
[   71.077110]        __lock_acquire+0x12f8/0x19f8
[   71.081648]        lock_acquire+0xe0/0x220
[   71.085754]        __mutex_lock+0x94/0x628
[   71.089862]        crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.096226]        crypto_get_session_by_sid+0x6cc/0x12b8 [cryptodev]
[   71.102666]
[   71.102666] other info that might help us debug this:
[   71.102666]
[   71.110668]  Possible unsafe locking scenario:
[   71.110668]
[   71.116588]        CPU0                    CPU1
[   71.121119]        ----                    ----
[   71.125650]   lock(&ses_new->sem);
[   71.129058]                                lock(&pcr->fcrypt.sem);
[   71.135242]                                lock(&ses_new->sem);
[   71.141165]   lock(&pcr->fcrypt.sem);
[   71.144834]
[   71.144834]  *** DEADLOCK ***
[   71.144834]
[   71.150756] 1 lock held by unbound/2895:
[   71.154681]  #0: 800000041b911468 (&ses_new->sem){+.+.}, at: crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.164700]
[   71.164700] stack backtrace:
[   71.169067] CPU: 1 PID: 2895 Comm: unbound Not tainted 5.4.39 #0
[   71.175075] Stack : ffffffff82790000 0000000000000000 0000000010108ce0 ed34220aed96997f
[   71.183091]         ed34220aed96997f 0000000000000000 800000041bb976f8 ffffffff837d0000
[   71.191106]         0000000000000000 0000000000000001 0000000000000000 ffffffff811ac4bc
[   71.199118]         6e626f756e64204e 0000000000000000 ffffffffffffffff 0000000000000010
[   71.207132]         0000000000000000 ffffffff81b40000 fffe000000000000 ffffffff81bc0000
[   71.215145]         0000000000000000 0000000000000000 ffffffff81b40000 0000000000000000
[   71.223158]         800000041f2e6200 0000000000000000 ffffffff81597628 1e00000010734ac7
[   71.231173]         0000000000000001 800000041bb94000 800000041bb976f0 47500c0a872e7996
[   71.239186]         ffffffff81865d8c 0000000000000000 800000041bb97828 ed34220aed96997f
[   71.247198]         ffffffff81b40bf7 ffffffff81865c54 ffffffff8111d4c8 ffffffff81a42a50
[   71.255213]         ...
[   71.257668] Call Trace:
[   71.260136] [<ffffffff8111d4c8>] show_stack+0x40/0x128
[   71.265288] [<ffffffff81865d8c>] dump_stack+0xe4/0x150
[   71.270444] [<ffffffff8119fb58>] check_noncircular+0x1a8/0x260
[   71.276289] [<ffffffff811a2d38>] __lock_acquire+0x12f8/0x19f8
[   71.282046] [<ffffffff811a3d80>] lock_acquire+0xe0/0x220
[   71.287374] [<ffffffff8188532c>] __mutex_lock+0x94/0x628
[   71.292706] [<ffffffffc02a7638>] crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.300290] [<ffffffffc02a7cc4>] crypto_get_session_by_sid+0x6cc/0x12b8 [cryptodev]
01.06.20203140Base systemBug ReportVery LowLowsysupgrade spews lost of errors on x86_64TrunkNew Task Description

This is on an x86_64 build of master from last Monday (circa 6e8b689).

The exact hardware is a Supermicro SYS-5018D-FN8T, 32GB of DRAM, 512GB of NVMe.

I built a new master today (8d2c031f) and scp’d it onto /tmp/ of my router. Then did a “sysupgrade /tmp/...” of that:

root@OpenWrt:/# ifdown wan
root@OpenWrt:/# 
root@OpenWrt:/# 
root@OpenWrt:/# sysupgrade /tmp/openwrt-r13360\+64-4661b05390-x86-64-generic-squashfs-combined-efi.img 
Image metadata not found
Reading partition table from bootdisk...
cat: write error: Broken pipe
Reading partition table from image...
Saving config files...
Commencing upgrade. Closing all shell sessions.
Watchdog handover: fd=7
- watchdog -
killall: telnetd: no process killed
killall: dropbear: no process kiSending TERM to remaining processes ... ntpd sh snmpd dhcpd ipset-dns collectd lldpd lldpd smartd named sleep ubusd askfirst urngd netifd rngd crond lighttpd sshd syslog-ng 
Sending KILL to remaining processes ... 
Switching to ramdisk...
Performing system upgrade...
Reading partition table from bootdisk...
dd: warning: partial read (8192 bytes); suggest iflag=fullblock
0+63 records in
0+63 records out
1101824 bytes (1.1 MB, 1.1 MiB) copied, 0.00492347 s, 224 MB/s
Reading partition table from image...
Writing image to /dev/nvme0n1p1...
cat: write error: Broken pipe
40959+0 records in
19+1 records out
20971008 bytes (21 MB, 20 MiB) copied, 0.0963313 s, 218 MB/s
Writing image to /dev/nvme0n1p2...
462847+0 records in
225+1 records out
236977664 bytes (237 MB, 226 MiB) copied, 0.810288 s, 292 MB/s
Writing new UUID to /dev/nvme0n1...
4+0 records in
4+0 records out
cat: write error: Broken pipe
4 bytes copied, 0.00439713 s, 0.9 k[ 2308.927159] F2FS-fs (nvme0n1p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
B/s
[ 2308.945667] F2FS-fs (nvme0n1p1): Can't find valid F2FS filesystem in 1th superblock
[ 2308.963141] F2FS-fs (nvme0n1p1): Magic Mismatch, valid(0xf2f52010) - read(0x6020601)
[ 2308.980487] F2FS-fs (nvme0n1p1): Can't find valid F2FS filesystem in 2th superblock
Upgrading bootloader on /dev/nvme0n1...
touch: /tmp/boot/grub/upgraded: No such file or directory
Upgrade completed
Rebooting system...
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[ 2310.852582] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20190816/nsprepkg-96)
[ 2310.881404] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20190816/nsprepkg-96)
[ 2311.080235] reboot: Restarting system
[ 2311.093088] reboot: machine restart

Note that on reboot, dmesg says:

...
May 31 16:43:17 OpenWrt kernel: [    3.721825] Copyright (c) 1999-2008 LSI Corporation
May 31 16:43:17 OpenWrt kernel: [    3.724539] nvme nvme0: 7/0/0 default/read/poll queues
May 31 16:43:17 OpenWrt kernel: [    3.732035] Fusion MPT SPI Host driver 3.04.20
May 31 16:43:17 OpenWrt kernel: [    3.752418] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 31 16:43:17 OpenWrt kernel: [    3.753680] GPT:Primary header thinks Alt. header is not at the end of the disk.
May 31 16:43:17 OpenWrt kernel: [    3.764418] ehci-pci: EHCI PCI platform driver
May 31 16:43:17 OpenWrt kernel: [    3.777281] GPT:504894 != 1000215215
May 31 16:43:17 OpenWrt kernel: [    3.787218] ehci-pci 0000:00:1a.0: EHCI Host Controller
May 31 16:43:17 OpenWrt kernel: [    3.795949] GPT:Alternate GPT header not at the end of the disk.
May 31 16:43:17 OpenWrt kernel: [    3.795950] GPT:504894 != 1000215215
May 31 16:43:17 OpenWrt kernel: [    3.806441] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
May 31 16:43:17 OpenWrt kernel: [    3.817622] GPT: Use GNU Parted to correct GPT errors.
May 31 16:43:17 OpenWrt kernel: [    3.817629]  nvme0n1: p1 p2 p128
...

but I don’t know if that’s related or not.

10.07.20203221PackagesBug ReportLowLowubox: validate.c: Link-Local IPv6 with interface ID not...AllNew Task Description

validate.c uses inet_pton for identifying IPv6 addresses [1], and this seems to not understand interface identifiers as used for Link-local IPv6 addresses.

Reproduce:

root@FFF-GW-Adrian:~# /sbin/validate_data host fdff::1
host - fdff::1 = true
root@FFF-GW-Adrian:~# /sbin/validate_data host fe80::1
host - fe80::1 = true
root@FFF-GW-Adrian:~# /sbin/validate_data host fe80::1%br-mesh
host - fe80::1%br-mesh = false

This is a problem practically whenever validata_data is used to check uci values.

For example, it is not possible to use a link-local address for specifying an NTP server:

https://github.com/openwrt/openwrt/blob/master/package/utils/busybox/files/sysntpd#L33

If ‘server:list(host)’ is changed to ‘server:list(string)’ there, it obviously works fine, as it’s just the validation.

[1] https://git.openwrt.org/?p=project/ubox.git;a=blob;f=validate/validate.c;h=e72b8117ecd8b680778b0f5c7637ed6546a7736b;hb=HEAD#l402

20.09.20203353PackagesBug ReportVery LowMediumiproute2 compilation fails due to dynsyms syntax errorTrunkNew Task Description

Building master:

files="e_bpf.c em_canid.c em_cmp.c em_ipset.c em_ipt.c em_meta.c em_nbyte.c em_u32.c f_basic.c f_bpf.c f_cgroup.c f_flow.c f_flower.c f_fw.c f_matchall.c f_route.c f_rsvp.c f_tcindex.c f_u32.c m_action.c m_bpf.c m_connmark.c m_csum.c
m_ct.c m_ctinfo.c m_ematch.c m_estimator.c m_gact.c m_gate.c m_ife.c m_ipt.c m_mirred.c m_mpls.c m_nat.c m_pedit.c m_police.c m_sample.c m_simple.c m_skbedit.c m_skbmod.c m_tunnel_key.c m_vlan.c m_xt_old.c p_eth.c p_icmp.c p_ip.c p_ip
6.c p_tcp.c p_udp.c q_atm.c q_cake.c q_cbq.c q_cbs.c q_choke.c q_clsact.c q_codel.c q_drr.c q_dsmark.c q_etf.c q_ets.c q_fifo.c q_fq.c q_fq_codel.c q_fq_pie.c q_gred.c q_hfsc.c q_hhf.c q_htb.c q_ingress.c q_mqprio.c q_multiq.c q_netem
.c q_pie.c q_plug.c q_prio.c q_qfq.c q_red.c q_rr.c q_sfb.c q_sfq.c q_skbprio.c q_taprio.c q_tbf.c static-syms.c tc.c tc_cbq.c tc_class.c tc_core.c tc_estimator.c tc_exec.c tc_filter.c tc_monitor.c tc_qdisc.c tc_red.c tc_stab.c tc_uti
l.c" ; \
echo "{" > dynsyms.list ; \
for s in `grep -B 3 '\<dlsym' $files | sed -n '/snprintf/{s:.*"\([^"]*\)".*:\1:;s:%s::;p}'` ; do \
        sed -n '/'$s'[^ ]* =/{s:.* \([^ ]*'$s'[^ ]*\) .*:\1;:;p}' $files ; \
done >> dynsyms.list ; \
echo "show_stats; print_nl; print_tm; parse_rtattr; parse_rtattr_flags; get_u32; matches; addattr_l; addattr_nest; addattr_nest_end; };" >> dynsyms.list
    CC       m_xt.so
In file included from ../include/uapi/linux/netfilter_ipv4/ip_tables.h:21,
                 from m_xt.c:19:
../include/uapi/linux/if.h:134: warning: "IFF_VOLATILE" redefined
 #define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\

In file included from m_xt.c:16:
/home/user/dev/openwrt/staging_dir/toolchain-mips_24kc_gcc-8.4.0_musl/include/net/if.h:48: note: this is the location of the previous definition
 #define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST| \

    CC       emp_ematch.tab.o
/home/user/dev/openwrt/staging_dir/toolchain-mips_24kc_gcc-8.4.0_musl/lib/gcc/mips-openwrt-linux-musl/8.4.0/../../../../mips-openwrt-linux-musl/bin/ld:dynsyms.list:0: syntax error in dynamic list
collect2: error: ld returned 1 exit status
make[5]: *** [Makefile:174: m_xt.so] Error 1

The dynsyms file contains:

$ cat ./build_dir/target-mips_24kc_musl/linux-ath79_generic/iproute2-tc/iproute2-5.8.0/tc/dynsyms.list
{
bpf_action_util;
connmark_action_util;
csum_action_util;
ct_action_util;
ctinfo_action_util;
gact_action_util;
gate_action_util;
ife_action_util;
ipt_action_util;
mirred_action_util;
mpls_action_util;
nat_action_util;
pedit_action_util;
police_action_util;
sample_action_util;
simple_action_util;
skbedit_action_util;
skbmod_action_util;
tunnel_key_action_util;
vlan_action_util;
ipt_action_util;
canid_ematch_util;
cmp_ematch_util;
ipset_ematch_util;
ipt_ematch_util;
meta_ematch_util;
nbyte_ematch_util;
u32_ematch_util;
p_pedit_eth;
p_pedit_icmp;
p_pedit_ip;
p_pedit_ip6;
p_pedit_tcp;
p_pedit_udp;
atm_qdisc_util;
cake_qdisc_util;
cbq_qdisc_util;
cbs_qdisc_util;
choke_qdisc_util;
clsact_qdisc_util;
codel_qdisc_util;
drr_qdisc_util;
dsmark_qdisc_util;
etf_qdisc_util;
ets_qdisc_util;
bfifo_qdisc_util;
pfifo_qdisc_util;
pfifo_head_drop_qdisc_util;
pfifo_fast_qdisc_util;
fq_qdisc_util;
fq_codel_qdisc_util;
fq_pie_qdisc_util;
gred_qdisc_util;
hfsc_qdisc_util;
hhf_qdisc_util;
htb_qdisc_util;
ingress_qdisc_util;
mqprio_qdisc_util;
multiq_qdisc_util;
netem_qdisc_util;
pie_qdisc_util;
plug_qdisc_util;
prio_qdisc_util;
qfq_qdisc_util;
red_qdisc_util;
rr_qdisc_util;
sfb_qdisc_util;
sfq_qdisc_util;
skbprio_qdisc_util;
taprio_qdisc_util;
tbf_qdisc_util;
basic_filter_util;
bpf_filter_util;
cgroup_filter_util;
flow_filter_util;
flower_filter_util;
fw_filter_util;
matchall_filter_util;
route_filter_util;
rsvp_filter_util;
rsvp6_filter_util;
tcindex_filter_util;
u32_filter_util;
bpf_exec_util;
show_stats; print_nl; print_tm; parse_rtattr; parse_rtattr_flags; get_u32; matches; addattr_l; addattr_nest; addattr_nest_end; };
 


01.01.20213552Base systemBug ReportMediumLowLinksys RE6500 bootloops with latest snapshotsTrunkNew Task Description

The RE6500 was working fine on an old 19.07 snapshot: OpenWrt 19.07-SNAPSHOT r10578-b3d70f628b

I sysupgraded to latest snapshot and it does not come up. Judging from the LEDs, it seems to bootloop.

Booting the latest snapshot initramfs through TFTP works. I sysupgraded again from the initramfs, and it still bootloops.

Possibly related to FS#3539. I will try to get a serial output to see what happens.

02.01.20213559Base systemBug ReportMediumLowuclient-fetch fails to download more than 2 filesAllNew Task Description

uclient-fetch has support for downloading several files:

uclient-fetch URL1 URL2 URL3 ...

However, this only works for the first two URLs. The third and above URLs simply cause uclient-fetch to re-download the second URL again.

In addition, only the first URL is checked for validity. If a subsequent URL is invalid, then the previous URL is re-used:

uclient-fetch http://example.com invalid

This example will download http://example.com twice.

09.03.2017609Base systemFeature RequestMediumLowprocd: implement runlevel 1TrunkNew Task Description

Sysupgrade currently kills processes with SIGKILL if they don’t shut down within 3 seconds after the SIGTERM signal. Some processes (e.g. domoticz) can take longer than 3 seconds to properly shut down. As this can potentially corrupt the sqlite database, it should be avoided.

While talking about this on IRC, it was suggested we should implement an “init 1” equivalent in procd. Adding this ticket as a reminder.

17.07.2017911OtherFeature RequestVery LowLowProblem with login into private git reposAllNew Task Description

I am not able to use packages from my private git repos which needs login. The system during the build process don’t ask me for login as before.

Here is the verbose log output:

make[3]: Leaving directory `/home/flowtester/caes/platform/package/base-files'
make[3]: Entering directory `/home/flowtester/caes/platform/package-bumblebee/packages/libdevereader'
mkdir -p /home/flowtester/caes/platform/dl
SHELL= flock /home/flowtester/caes/platform/tmp/.libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860.tar.gz.flock -c '          echo "Checking out files from the git repository..."; mkdir -p /home/flowtester/caes/platform/tmp/dl && cd /home/flowtester/caes/platform/tmp/dl && rm -rf libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 && [ \! -d libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 ] && git clone  https://redmine.develict.com/git/devereader libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 && (cd libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 && git checkout daa94e0fad44a000892570665e6c792fd9cad860 && git submodule update --init --recursive) && echo "Packing checkout..." && export TAR_TIMESTAMP=`cd libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 && git log -1 --format='\''@%ct'\''` && rm -rf libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860/.git &&  tar --numeric-owner --owner=0 --group=0 --sort=name ${TAR_TIMESTAMP:+--mtime="$TAR_TIMESTAMP"} -c libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 |     gzip -nc > /home/flowtester/caes/platform/tmp/dl/libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860.tar.gz && mv /home/flowtester/caes/platform/tmp/dl/libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860.tar.gz /home/flowtester/caes/platform/dl/ && rm -rf libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860;     '
Checking out files from the git repository...
Cloning into 'libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860'...
fatal: Authentication failed for 'https://redmine.develict.com/git/devereader/'
make[3]: *** [/home/flowtester/caes/platform/dl/libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860.tar.gz] Error 128
make[3]: Leaving directory `/home/flowtester/caes/platform/package-bumblebee/packages/libdevereader'
make[2]: *** [package/feeds/bumblebee/libdevereader/compile] Error 2
make[2]: Leaving directory `/home/flowtester/caes/platform'
make[1]: *** [/home/flowtester/caes/platform/staging_dir/target-mipsel_24kc_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory `/home/flowtester/caes/platform'
make: *** [world] Error 2

If I try it manually from cli everythings works but not during the prepare process ....


10.08.201684Base systemBug ReportVery LowCriticalsysntp does not resolves IPv6 when IPv6 only stackTrunkUnconfirmed Task Description

sysntp (busybox ntp) does not resolve IPv6 addresses when the machine is IPv6 stack based only.

proposed solution exist:

https://dev.openwrt.org/attachment/ticket/12167/0001-busybox-make-ntpd-prefer-IPv6-addresses.patch

http://lists.busybox.net/pipermail/busybox/2016-August/084529.html

Already reported in

https://github.com/lede-project/source/issues/249

24.08.2016115Base systemBug ReportVery LowMediumWWAN-connections using 3g with HUAWEI ME909u-521 unstab...TrunkUnconfirmed Task Description

Actually, I am trying to stabilize wwan (3g actually; LTE later on) using pppd with my HUAWEI ME909u-521,
because either my MT7620-based router locks up during boot already; or after short period of real usage.
During night, when router is almost idle, just some watchdog date sent via wwan, no problem.

First trace of a possible problem was this msg in logread:
daemon.notice netifd: wwan (1676): Error setting WWAN mode!

Wich is expected, as in /lib/netifd/proto/3g.sh:

...

                      elif echo "$cardinfo" | grep -qi huawei; then
                              case "$service" in
                                      umts_only) CODE="14,2";;
                                      gprs_only) CODE="13,1";;
                                      *) CODE="2,2";;
                              esac
                              export MODE="AT^SYSCFG=${CODE},3FFFFFFF,2,4"    #####Will not work !!!!! Switching USB-Stick to 3g-preferred ?

...
...

                      [ -n "$MODE" ] && gcom -d "$device" -s /etc/gcom/setmode.gcom

Will not work, because the ME909u-521 rejects AT^SYSCFG . However, AT^SYSCFGEX will work, but having different syntax.
MODE=”AT^SYSCFG=${CODE},3FFFFFFF,2,4” will be effective for simpler modems.

/etc/gcom/setmode.gcom returns exit 1; but this error is not checked in 3g.sh

Not shure, whether this is the reason for my problems; however, reason of concern, as high speed modems
are more and more common.
Willing to participate in testing/debugging.

For details regarding my modem, consult
HUAWEI ME909u-521 LTE LGA Module AT Command Interface Specification
http://www.paoli.cz/out/media/HUAWEI_ME909u-521_LTE_LGA_Module_AT_Command_Interface_Specification-V100R001_02.pdf

30.08.2016126KernelBug ReportVery LowMediumkernel panic on brcm47xx (netgear wgt634u) when routing...TrunkUnconfirmed Task Description

With LEDE version reboot-1444-g1bb914d, when pulling data through the WAN interface to the LAN interface at a sufficiently high speed, e.g. on a Raspberry Pi connected by ethernet to a LAN port, and the WAN interface connected to a gigabit internet service and issuing a command like:

curl https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.7.2.tar.xz > /dev/null

From the pi, I see something like:

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  9 86.2M    9 7977k    0     0  1834k      0  0:00:48  0:00:04  0:00:44 1835k[  352.295252] smsc95xx 1-1.1:1.0 eth0: link down
  9 86.2M    9 7977k    0     0  1255k      0  0:01:10  0:00:06  0:01:04 1155k[  353.959380] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  9 86.2M    9 7977k    0     0  43292      0  0:34:48  0:03:08  0:31:40     0

or

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  8 86.2M    8 7440k    0     0  1478k      0  0:00:59  0:00:05  0:00:54 1478k[ 1100.164849] smsc95xx 1-1.1:1.0 eth0: link down
  8 86.2M    8 7440k    0     0  1232k      0  0:01:11  0:00:06  0:01:05 1300k[ 1101.836954] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  8 86.2M    8 7440k    0     0   740k      0  0:01:59  0:00:10  0:01:49     0

Where the “link down” is the WGT634U panic’ing and rebooting. The panic on the WGT634U looks like this:

[  171.966841] CPU 0 Unable to handle kernel paging request at virtual address 008224d8, epc == 80077ecc, ra == 801d8100
[  171.977700] Oops[#1]:
[  171.980093] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.1.20 #0
[  171.986265] task: 8181e008 ti: 8182a000 task.ti: 8182a000
[  171.991711] $ 0   : 00000000 1000b800 008224d8 b41c479b
[  171.997140] $ 4   : 008224d8 00010000 80361ef8 00000000
[  172.002557] $ 8   : 81018b14 8101da14 00100100 dceb27b8
[  172.007983] $12   : ffffffff 00000001 ffffff80 000042c6
[  172.013400] $16   : b41c479b 00000001 81b450a8 81b7d260
[  172.018817] $20   : 803b5dcc 00000002 00000008 0000000a
[  172.024235] $24   : 00000000 80072b24                  
[  172.029653] $28   : 8182a000 8182bdb8 00000100 801d8100
[  172.035083] Hi    : 00000000
[  172.038026] Lo    : 0000006c
[  172.041036] epc   : 80077ecc put_compound_page+0x78/0x240
[  172.046547] ra    : 801d8100 skb_release_data+0xa8/0x10c
[  172.051920] Status: 1000b803 KERNEL EXL IE 
[  172.056254] Cause : 00800008
[  172.059194] BadVA : 008224d8
[  172.062144] PrId  : 00029007 (Broadcom BMIPS3300)
[  172.066891] Modules linked in: pppoe ppp_async iptable_nat ath5k ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_id xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables leds_gpio ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common ssb_hcd
[  172.132913] Process ksoftirqd/0 (pid: 3, threadinfo=8182a000, task=8181e008, tls=00000000)
[  172.141213] Stack : 1000b803 00000000 0000006c b41c479b 81b45080 801d8100 00000000 0000012c
          00000001 801e7d60 81becb60 81b7d260 81b7d260 80335b3c 81bece60 801d818c
          80360000 803623e0 81becb60 80335b3c 803623e0 801e63d8 8182be10 8182be10
          00000001 00000002 803b5dd0 00000001 803b5dd4 00000003 803b0000 80024fec
          81841048 80361100 819bb770 80007664 80364510 8181e008 80362898 04208040
          ...
[  172.178058] Call Trace:
[  172.180640] [<80077ecc>] put_compound_page+0x78/0x240
[  172.185822] [<801d8100>] skb_release_data+0xa8/0x10c
[  172.190895] [<801d818c>] __kfree_skb+0x28/0xb4
[  172.195466] [<801e63d8>] net_tx_action+0xd8/0x140
[  172.200329] [<80024fec>] __do_softirq+0x184/0x2b0
[  172.205184] [<80025140>] run_ksoftirqd+0x28/0x80
[  172.209953] [<8003bae0>] smpboot_thread_fn+0x148/0x178
[  172.215246] [<80039390>] kthread+0xdc/0xe8
[  172.219459] [<800010a8>] ret_from_kernel_thread+0x14/0x1c
[  172.224921] 
[  172.226470] 
Code: 30840001  0204100a  00402021 <8c420000> 000211c2  30420001  10400018  00000000  8e020000 
[  172.237022] ---[ end trace 89a3318b662df6d8 ]---
[  172.250536] Kernel panic - not syncing: Fatal exception in interrupt
[  172.262338] Rebooting in 3 seconds..

or

[ 1317.958261] Unhandled kernel unaligned access[#1]:
[ 1317.963173] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.1.20 #0
[ 1317.969349] task: 8181e008 ti: 8182a000 task.ti: 8182a000
[ 1317.974795] $ 0   : 00000000 1000b801 00000001 00200000
[ 1317.980232] $ 4   : 647b394a 00010000 00018da4 00000000
[ 1317.985658] $ 8   : 8181e040 b1e1b104 00000017 40000000
[ 1317.991085] $12   : 500018dd 00000000 00000000 010102f2
[ 1317.996510] $16   : 80e4d1e0 00000001 80e4d208 81acb0e0
[ 1318.001936] $20   : 803b5dcc 00000002 00000008 0000000a
[ 1318.007362] $24   : 00000010 8001ead0                  
[ 1318.012789] $28   : 8182a000 8182bdd0 00000100 801d8100
[ 1318.018220] Hi    : 00000001
[ 1318.021160] Lo    : 00000001
[ 1318.024169] epc   : 80078474 put_page+0x0/0x4c
[ 1318.028732] ra    : 801d8100 skb_release_data+0xa8/0x10c
[ 1318.034104] Status: 1000b803 KERNEL EXL IE 
[ 1318.038439] Cause : 00800010
[ 1318.041380] BadVA : 647b394a
[ 1318.044330] PrId  : 00029007 (Broadcom BMIPS3300)
[ 1318.049076] Modules linked in: pppoe ppp_async iptable_nat ath5k ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_id xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables leds_gpio ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common ssb_hcd
[ 1318.115124] Process ksoftirqd/0 (pid: 3, threadinfo=8182a000, task=8181e008, tls=00000000)
[ 1318.123424] Stack : 00000000 80c60c94 00db35c0 626a006e ff330000 81acb0e0 81acb0e0 80335b3c
          80c28260 801d818c 80360000 8004f368 00000018 0000000a 803623e0 801e63d8
          8182be10 8182be10 80361100 00000002 803b5dd0 00000001 803b5dd4 00000013
          803b0000 80024fec 80364510 80361100 80360000 8000736c 80364510 8181e008
          80362898 04208040 00018da4 80360000 80310000 803b5dcc 803615a0 803114f4
          ...
[ 1318.160295] Call Trace:
[ 1318.162885] [<80078474>] put_page+0x0/0x4c
[ 1318.167108] [<801d8100>] skb_release_data+0xa8/0x10c
[ 1318.172182] [<801d818c>] __kfree_skb+0x28/0xb4
[ 1318.176752] [<801e63d8>] net_tx_action+0xd8/0x140
[ 1318.181614] [<80024fec>] __do_softirq+0x184/0x2b0
[ 1318.186471] [<80025140>] run_ksoftirqd+0x28/0x80
[ 1318.191238] [<8003bae0>] smpboot_thread_fn+0x148/0x178
[ 1318.196530] [<80039390>] kthread+0xdc/0xe8
[ 1318.200744] [<800010a8>] ret_from_kernel_thread+0x14/0x1c
[ 1318.206200] 
[ 1318.207747] 
Code: 00003021  0801e0ce  24a57888 <8c820000> 3042c000  10400003  00801821  0801df95  00000000 
[ 1318.218397] ---[ end trace 2502a626803fb4b9 ]---
[ 1318.231740] Kernel panic - not syncing: Fatal exception in interrupt
[ 1318.243362] Rebooting in 3 seconds..

This looks similar to: https://dev.openwrt.org/ticket/11091

02.09.2016133Base systemBug ReportVery LowLowNetgear r8000 cannot use 802.1x encryptionTrunkUnconfirmed Task Description

Github issue #305 reported by https://github.com/Halry

My android phone can’t connect to it.(tested on nexus 6p and samsung s7 edge)
Sun Aug 28 16:28:46 2016 daemon.debug hostapd: wlan2: STA 94:fe:22:11:22:33 IEEE 802.1X: Sending EAP Packet (identifier 247)
Sun Aug 28 16:28:46 2016 daemon.debug hostapd: wlan2: STA 94:fe:22:11:22:33 WPA: sending 1/4 msg of 4-Way Handshake
Sun Aug 28 16:28:46 2016 daemon.debug hostapd: wlan2: STA 94:fe:22:11:22:33 WPA: received EAPOL-Key frame (2/4 Pairwise)
Sun Aug 28 16:28:46 2016 daemon.debug hostapd: wlan2: STA 94:fe:22:11:22:33 WPA: sending 3/4 msg of 4-Way Handshake
Sun Aug 28 16:28:46 2016 daemon.info hostapd: wlan2: STA 94:fe:22:11:22:33 IEEE 802.11: disassociated
Sun Aug 28 16:28:46 2016 daemon.debug hostapd: wlan2: STA 94:fe:22:11:22:33 WPA: event 2 notification
Sun Aug 28 16:29:00 2016 daemon.info hostapd: wlan1: STA 94:fe:22:11:22:33 IEEE 802.11: associated
Sun Aug 28 16:29:00 2016 daemon.info hostapd: wlan1: STA 94:fe:22:11:22:33 IEEE 802.11: disassociated
Sun Aug 28 16:29:11 2016 daemon.info hostapd: wlan1: STA 94:fe:22:11:22:33 IEEE 802.11: associated
Sun Aug 28 16:29:11 2016 daemon.info hostapd: wlan1: STA 94:fe:22:11:22:33 IEEE 802.11: disassociated

However,Windows can connect to it.

Here are some my nexus 6p’s dmesg:
CFG80211-ERROR wl_cfg80211_disconnect:Reason 17

05.09.2016160Base systemBug ReportVery LowLowusb-serial (pl2303) failures on mt7621 dlink dir860l-b1TrunkUnconfirmed Task Description
git describe
reboot-1497-ga810e77

with diffconfig:

CONFIG_TARGET_ramips=y
CONFIG_TARGET_ramips_mt7621=y
CONFIG_TARGET_ramips_mt7621_DEVICE_dir-860l-b1=y
CONFIG_DEVEL=y
CONFIG_BUILD_LOG=y
CONFIG_PACKAGE_ip=y
CONFIG_PACKAGE_kmod-usb-core=y
CONFIG_PACKAGE_kmod-usb-ohci=y
CONFIG_PACKAGE_kmod-usb-ohci-pci=y
CONFIG_PACKAGE_kmod-usb-serial=y
CONFIG_PACKAGE_kmod-usb-serial-ftdi=y
CONFIG_PACKAGE_kmod-usb-serial-pl2303=y
CONFIG_PACKAGE_kmod-usb2=y
CONFIG_PACKAGE_kmod-usb2-pci=y
CONFIG_PACKAGE_kmod-usb3=y
CONFIG_PACKAGE_screen=y

screen starts, but doesn’t work. The usb-relevant dmesg’s are:

[    4.550000] usbcore: registered new interface driver usbfs
[    4.560000] usbcore: registered new interface driver hub
[    4.570000] usbcore: registered new device driver usb
[    4.580000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.620000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.670000] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[    4.720000] hub 1-0:1.0: USB hub found
[    4.740000] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[    4.760000] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.770000] hub 2-0:1.0: USB hub found
[    5.260000] usb 1-1: new full-speed USB device number 2 using xhci-mtk
[    5.410000] usb 1-1: no of_node; not parsing pinctrl DT
[   10.150000] usbcore: registered new interface driver usbserial
[   10.160000] usbcore: registered new interface driver usbserial_generic
[   10.180000] usbserial: USB Serial support registered for generic
[   10.220000] usbcore: registered new interface driver ftdi_sio
[   10.240000] usbserial: USB Serial support registered for FTDI USB Serial Device
[   10.260000] usbcore: registered new interface driver pl2303
[   10.270000] usbserial: USB Serial support registered for pl2303
[   10.290000] pl2303 ttyUSB0: no of_node; not parsing pinctrl DT
[   10.290000] usb 1-1: pl2303 converter now attached to ttyUSB0
[  871.510000] pl2303 ttyUSB0: pl2303_get_line_request - failed: -145
[  871.620000] pl2303 ttyUSB0: pl2303_set_line_request - failed: -145
[  871.840000] pl2303 ttyUSB0: pl2303_set_control_lines - failed: -145

Screen also throws an error (which gets blanked out, but is captured by the serial console):

# screen /dev/ttyUSB0 115200
/dev/null/utmp: Not a directory
07.09.2016162Base systemBug ReportVery LowLowTwo issues with libuclient-openssl in luci-sslTrunkUnconfirmed Task Description

1: RC4 and 3DES are used when both have security issues. Actually the latter also is true of mbedtls/polarssl.

2: Only TLS 1.2 is supported. This makes multiple clients unable to connect.

BTW, I got this working after modifying the Makefile to luci-ssl to depend on libustream-openssl instead. No idea what the situation is but so far it works without a problem.

17.09.2016181Base systemBug ReportVery LowMediumChanging TX power doesn't nothing (MediaTek MT7628AN ve...TrunkUnconfirmed Task Description

Hello,

As I said, if I change the TX power from 0 dBm to 20 dBm doesn’t nothing. There isn’t any visible change in tx power. I tested other powers too (5, 8, 15,..).

It is a Xiaomi Nano (lite).

SoC Type: MediaTek MT7628AN ver:1 eco:2
MIPS: machine is MiWiFi Nano
Linux version 4.4.19 (-) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1444) ) #0 Fri Aug 26 15:03:40 2016.

21.11.2016295KernelBug ReportVery LowHighath10k_pci 0001:01:00.0: SWBA overrun on vdevTrunkUnconfirmed Task Description

Supply the following if possible:

- TP-LINK c2600 v1.1
- LEDE Reboot r2244
- after some hours, the network device produce the below stacktrace.

[61789.980553] ————[ cut here ]———— [61789.980600] WARNING: CPU: 0 PID: 3 at net/core/dev.c:4837 net_rx_action+0×154/0x2e4()
[61789.984240] Modules linked in: pppoe ppp_async iptable_nat pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY ts_kmp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink nf_conntrack iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt br_netfilter em_cmp sch_teql em_nbyte sch_htb sch_pie sch_gred sch_dsmark cls_basic act_ipt sch_prio em_text
[61790.061568] sch_codel sch_tbf sch_sfq em_meta act_police sch_fq sch_red act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_hfsc sch_ingress ath10k_pci ath10k_core ath mac80211 cfg80211 compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables ifb ip6_tunnel tunnel6 tun snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore
[61790.130320] usb_storage uhci_hcd f2fs ext4 jbd2 mbcache crc32c_generic crypto_hash leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform ehci_hcd sd_mod ahci_platform libahci_platform libahci libata scsi_mod gpio_button_hotplug usbcore nls_base usb_common
[61790.158798] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.4.30 #0
[61790.159062] Hardware name: Qualcomm (Flattened Device Tree)
[61790.165160] [<c02207f4>] (unwind_backtrace) from [<c021d2e4>] (show_stack+0×14/0×20)
[61790.170534] [<c021d2e4>] (show_stack) from [<c03b82a4>] (dump_stack+0x8c/0xa0)
[61790.178521] [<c03b82a4>] (dump_stack) from [<c0228aec>] (warn_slowpath_common+0xa4/0xd0)
[61790.185550] [<c0228aec>] (warn_slowpath_common) from [<c0228bcc>] (warn_slowpath_null+0x1c/0×24)
[61790.193798] [<c0228bcc>] (warn_slowpath_null) from [<c050bcd0>] (net_rx_action+0×154/0x2e4)
[61790.202568] [<c050bcd0>] (net_rx_action) from [<c022bc90>] (do_softirq+0xdc/0×230)
[61790.210636] [<c022bc90>] (
do_softirq) from [<c022be18>] (run_ksoftirqd+0×34/0×64)
[61790.218626] [<c022be18>] (run_ksoftirqd) from [<c0246784>] (smpboot_thread_fn+0×190/0x1b8)
[61790.226006] [<c0246784>] (smpboot_thread_fn) from [<c02438e4>] (kthread+0xf8/0×100)
[61790.234335] [<c02438e4>] (kthread) from [<c0209cb8>] (ret_from_fork+0×14/0x3c)
[61790.241951] —[ end trace bbf62e8dea16c714 ]— [61790.250226] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 1, skipped old beacon

21.11.2016296Base systemBug ReportVery LowHighUbiquiti Bullet M 10/100 ethernet interface comes up as...TrunkUnconfirmed Task Description

For the last month or so, and persisting in r2248, when a Ubiquiti Bullet M is booted through typical Ubiquiti 10/100 passive PoE injector, the interface appears to come up in gigabit mode (see timestamp 18.990274 below), despite being only a 10/100 Mbps interface. Restarting /etc/init.d/network fixes it. I am running batman-adv over the ethernet interface, which may be involved. I will check if it happens when batman-adv is not used on the interface and report in a followup comment.

The dmesg look like this:

[    0.000000] Linux version 4.4.32 (openwrt@hawg) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1439) ) #0 Mon Nov 21 07:14:51 2016
[    0.000000] MyLoader: sysp=00030800, boardp=088201a0, parts=fdeffeff
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7240 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80412320, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=UBNT-BM mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 27616K/32768K available (2990K kernel code, 174K rwdata, 756K rodata, 296K init, 198K bss, 5152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
[    0.000013] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
[    0.007858] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
[    0.080537] pid_max: default: 32768 minimum: 301
[    0.085319] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091915] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102739] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113516] NET: Registered protocol family 16
[    0.120053] MIPS: machine is Ubiquiti Bullet M
[    0.126714] registering PCI controller with io_map_base unset
[    0.357171] PCI host bridge to bus 0000:00
[    0.361273] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.368174] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.373719] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.380486] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.388422] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[    0.388466] pci 0000:00:00.0: fixup device configuration
[    0.395018] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    0.395154] pci 0000:00:00.0: supports D1
[    0.395179] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.395521] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.395573] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    0.402864] pci 0000:00:00.0: using irq 40 for pin 1
[    0.408959] clocksource: Switched to clocksource MIPS
[    0.415845] NET: Registered protocol family 2
[    0.421435] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.428393] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.434796] TCP: Hash tables configured (established 1024 bind 1024)
[    0.441291] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.447126] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.453786] NET: Registered protocol family 1
[    0.458221] PCI: CLS 0 bytes, default 32
[    0.464223] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.470512] Crashlog allocated RAM at address 0x1f00000
[    0.495166] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.501050] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.514332] io scheduler noop registered
[    0.518252] io scheduler deadline registered (default)
[    0.523724] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.530709] console [ttyS0] disabled
[    0.554342] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12187500) is a 16550A
[    0.563020] console [ttyS0] enabled
[    0.570030] bootconsole [early0] disabled
[    0.582486] m25p80 spi0.0: found mx25l6405d, expected m25p80
[    0.588201] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.593207] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.599160] Creating 5 MTD partitions on "spi0.0":
[    0.603978] 0x000000000000-0x000000040000 : "u-boot"
[    0.611975] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.619659] 0x000000050000-0x0000007b0000 : "firmware"
[    0.638850] 2 uimage-fw partitions found on MTD device firmware
[    0.644866] 0x000000050000-0x0000001a0000 : "kernel"
[    0.651748] 0x0000001a0000-0x0000007b0000 : "rootfs"
[    0.658927] mtd: device 4 (rootfs) set to be root filesystem
[    0.664753] 1 squashfs-split partitions found on MTD device rootfs
[    0.671002] 0x000000550000-0x0000007b0000 : "rootfs_data"
[    0.678725] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.685799] 0x0000007f0000-0x000000800000 : "EEPROM"
[    0.713743] libphy: ag71xx_mdio: probed
[    1.302694] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
[    1.312905] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.322158] NET: Registered protocol family 10
[    1.332118] NET: Registered protocol family 17
[    1.336691] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.349583] 8021q: 802.1Q VLAN Support v1.8
[    1.362372] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.372025] Freeing unused kernel memory: 296K (80436000 - 80480000)
[    2.887723] init: Console is alive
[    2.891524] init: - watchdog -
[    4.278153] usbcore: registered new interface driver usbfs
[    4.283867] usbcore: registered new interface driver hub
[    4.289377] usbcore: registered new device driver usb
[    4.301662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.310384] ehci-platform: EHCI generic platform driver
[    4.319460] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.327414] ohci-platform: OHCI generic platform driver
[    4.336259] init: - preinit -
[    5.148878] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.181862] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    7.440590] eth0: link up (100Mbps/Full duplex)
[    7.445184] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.484066] jffs2: notice: (361) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.501955] mount_root: switching to jffs2 overlay
[    8.517794] urandom-seed: Seeding with /etc/urandom.seed
[    8.794632] eth0: link down
[    8.814035] procd: - early -
[    8.817063] procd: - watchdog -
[    9.492101] procd: - ubus -
[    9.545805] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.555498] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.564637] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.574254] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.583375] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.593373] random: ubusd: uninitialized urandom read (4 bytes read, 16 bits of entropy available)
[    9.602738] random: ubusd: uninitialized urandom read (4 bytes read, 16 bits of entropy available)
[    9.612394] procd: - init -
[   10.066368] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[   10.074041] Backport generated by backports.git backports-20160324-9-g0e38f5c
[   10.125220] batman_adv: B.A.T.M.A.N. advanced 2016.4 (compatibility version 15) loaded
[   10.213939] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   10.224958] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[   10.233630] ath: EEPROM regdomain: 0x0
[   10.233647] ath: EEPROM indicates default country code should be used
[   10.233661] ath: doing EEPROM country->regdmn map search
[   10.233689] ath: country maps to regdmn code: 0x3a
[   10.233705] ath: Country alpha2 being used: US
[   10.233718] ath: Regpair used: 0x3a
[   10.248634] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.257391] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   11.870351] random: jshn: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   12.001559] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   18.855427] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.875510] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[   18.990274] eth0: link up (1000Mbps/Full duplex)
[   18.994964] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.330349] batman_adv: bat0: Adding interface: eth0
[   19.335365] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[   19.359419] batman_adv: bat0: Interface activated: eth0
[   19.367077] 8021q: adding VLAN 0 to HW filter on device bat0
[   19.406417] device bat0 entered promiscuous mode
[   19.411309] br-pub: port 1(bat0) entered forwarding state
[   19.416772] br-pub: port 1(bat0) entered forwarding state
[   19.422579] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[   19.870508] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[   20.359133] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[   20.367269] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[   21.412169] br-pub: port 1(bat0) entered forwarding state
[   21.549966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.563679] device wlan0 entered promiscuous mode
[   21.591315] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.597879] br-pub: port 2(wlan0) entered forwarding state
[   21.603541] br-pub: port 2(wlan0) entered forwarding state
[   21.784924] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[   21.912131] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[   22.268273] batman_adv: bat0: Adding interface: mesh0
[   22.273432] batman_adv: bat0: Interface activated: mesh0
[   23.599046] br-pub: port 2(wlan0) entered forwarding state
[   29.369162] batman_adv: bat0: IGMP Querier appeared
[   29.374093] batman_adv: bat0: MLD Querier appeared
[   34.068975] ------------[ cut here ]------------
[   34.073700] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:306 dev_watchdog+0x1dc/0x260()
[   34.082197] NETDEV WATCHDOG: eth0 (ag71xx): transmit queue 0 timed out
[   34.088754] Modules linked in: ath9k ath9k_common mac80211 ath9k_hw ath batman_adv libcrc32c cfg80211 compat ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16
 cryptomgr aead crypto_null crc32c_generic crypto_hash
[   34.112252] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.32 #0
[   34.118013] Stack : 803c8fc4 00000000 00000001 80420000 80413038 80412cc3 803aa67c 00000000
[   34.118013] 	  8048379c 8041135c 00000200 00100000 0000000a 800a71a8 803afce8 80410000
[   34.118013] 	  00000003 8041135c 803ae0f4 8040dc2c 0000000a 800a5124 00000006 00000000
[   34.118013] 	  00000000 801f3100 00000000 00000000 00000000 00000000 00000000 00000000
[   34.118013] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   34.118013] 	  ...
[   34.153969] Call Trace:
[   34.156440] [<80071af0>] show_stack+0x50/0x84
[   34.160843] [<80081870>] warn_slowpath_common+0xa0/0xd0
[   34.166096] [<800818cc>] warn_slowpath_fmt+0x2c/0x38
[   34.171111] [<80290970>] dev_watchdog+0x1dc/0x260
[   34.175854] [<800b0460>] call_timer_fn.isra.5+0x24/0x80
[   34.181125] [<800b06e4>] run_timer_softirq+0x1b4/0x1fc
[   34.186296] [<80083dec>] __do_softirq+0x250/0x298
[   34.191059] [<8006a5d0>] plat_irq_dispatch+0xd4/0x10c
[   34.196134] [<80060830>] ret_from_irq+0x0/0x4
[   34.200526] [<80060a80>] __r4k_wait+0x20/0x40
[   34.204906] [<800a2304>] cpu_startup_entry+0x9c/0xe8
[   34.209934] [<80436bd4>] start_kernel+0x470/0x490
[   34.214656] 
[   34.216159] ---[ end trace ef06a4b3ec78272a ]---
[   34.220810] eth0: tx timeout
[   37.565193] random: nonblocking pool is initialized
[   44.068999] eth0: tx timeout
[   54.069064] eth0: tx timeout
[   64.068993] eth0: tx timeout
[   74.069871] eth0: tx timeout
[   82.660973] batman_adv: bat0: MLD Querier disappeared - multicast optimizations disabled
[   84.070901] eth0: tx timeout
[   92.701961] batman_adv: bat0: MLD Querier appeared
[   94.071717] eth0: tx timeout
[  104.072355] eth0: tx timeout
[  114.072669] eth0: tx timeout
[...]

When I do an /etc/init.d/network restart, the interface recovers to normal function, and I get this in dmesg:

[ 1296.763793] br-pub: port 2(wlan0) entered disabled state
[ 1296.769232] br-pub: port 1(bat0) entered disabled state
[ 1296.808305] device bat0 left promiscuous mode
[ 1296.812986] br-pub: port 1(bat0) entered disabled state
[ 1296.862085] IPv6: ADDRCONF(NETDEV_UP): bat0: link is not ready
[ 1296.879239] device wlan0 left promiscuous mode
[ 1296.883945] br-pub: port 2(wlan0) entered disabled state
[ 1296.904196] batman_adv: bat0: Interface deactivated: mesh0
[ 1296.909752] batman_adv: bat0: Removing interface: mesh0
[ 1296.963462] batman_adv: bat0: Interface deactivated: eth0
[ 1296.993492] eth0: link down
[ 1296.998705] batman_adv: bat0: Removing interface: eth0
[ 1301.629484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1301.649941] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[ 1301.985100] eth0: link up (100Mbps/Full duplex)
[ 1301.989698] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1302.191373] batman_adv: bat0: Adding interface: eth0
[ 1302.196453] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[ 1302.220488] batman_adv: bat0: Interface activated: eth0
[ 1302.228092] 8021q: adding VLAN 0 to HW filter on device bat0
[ 1302.275944] device bat0 entered promiscuous mode
[ 1302.280747] br-pub: port 1(bat0) entered forwarding state
[ 1302.286292] br-pub: port 1(bat0) entered forwarding state
[ 1302.292106] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[ 1302.590333] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[ 1303.213417] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[ 1303.221556] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[ 1304.283452] br-pub: port 1(bat0) entered forwarding state
[ 1304.672382] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1304.782643] device wlan0 entered promiscuous mode
[ 1304.827845] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1304.834479] br-pub: port 2(wlan0) entered forwarding state
[ 1304.840053] br-pub: port 2(wlan0) entered forwarding state
[ 1305.112607] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[ 1305.190600] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[ 1305.692918] batman_adv: bat0: Adding interface: mesh0
[ 1305.698080] batman_adv: bat0: Interface activated: mesh0
[ 1306.833410] br-pub: port 2(wlan0) entered forwarding state
[ 1312.303688] batman_adv: bat0: IGMP Querier appeared
[ 1312.308629] batman_adv: bat0: MLD Querier appeared

If I disconnect the other end of the ethernet cable so that there is no link peer, I do not see the problem (see below):

[    0.000000] Linux version 4.4.32 (openwrt@hawg) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1439) ) #0 Mon Nov 21 07:14:51 2016
[    0.000000] MyLoader: sysp=00000000, boardp=00000000, parts=ffffffff
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7240 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80412320, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=UBNT-BM mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 27616K/32768K available (2990K kernel code, 174K rwdata, 756K rodata, 296K init, 198K bss, 5152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
[    0.000013] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
[    0.007859] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
[    0.080537] pid_max: default: 32768 minimum: 301
[    0.085319] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091915] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113517] NET: Registered protocol family 16
[    0.120061] MIPS: machine is Ubiquiti Bullet M
[    0.126721] registering PCI controller with io_map_base unset
[    0.357179] PCI host bridge to bus 0000:00
[    0.361281] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.368182] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.373728] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.380495] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.388431] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[    0.388474] pci 0000:00:00.0: fixup device configuration
[    0.395026] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    0.395163] pci 0000:00:00.0: supports D1
[    0.395187] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.395530] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.395581] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    0.402872] pci 0000:00:00.0: using irq 40 for pin 1
[    0.408968] clocksource: Switched to clocksource MIPS
[    0.415854] NET: Registered protocol family 2
[    0.421444] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.428402] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.434805] TCP: Hash tables configured (established 1024 bind 1024)
[    0.441299] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.447134] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.453795] NET: Registered protocol family 1
[    0.458229] PCI: CLS 0 bytes, default 32
[    0.464231] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.470521] Crashlog allocated RAM at address 0x1f00000
[    0.495175] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.501058] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.514341] io scheduler noop registered
[    0.518261] io scheduler deadline registered (default)
[    0.523733] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.530718] console [ttyS0] disabled
[    0.554351] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12187500) is a 16550A
[    0.563030] console [ttyS0] enabled
[    0.570040] bootconsole [early0] disabled
[    0.582496] m25p80 spi0.0: found mx25l6405d, expected m25p80
[    0.588212] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.593216] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.599171] Creating 5 MTD partitions on "spi0.0":
[    0.603989] 0x000000000000-0x000000040000 : "u-boot"
[    0.611984] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.619662] 0x000000050000-0x0000007b0000 : "firmware"
[    0.638852] 2 uimage-fw partitions found on MTD device firmware
[    0.644868] 0x000000050000-0x0000001a0000 : "kernel"
[    0.651750] 0x0000001a0000-0x0000007b0000 : "rootfs"
[    0.658926] mtd: device 4 (rootfs) set to be root filesystem
[    0.664753] 1 squashfs-split partitions found on MTD device rootfs
[    0.671004] 0x000000550000-0x0000007b0000 : "rootfs_data"
[    0.678725] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.685800] 0x0000007f0000-0x000000800000 : "EEPROM"
[    0.713752] libphy: ag71xx_mdio: probed
[    1.302703] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
[    1.312917] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.322177] NET: Registered protocol family 10
[    1.332146] NET: Registered protocol family 17
[    1.336720] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.349611] 8021q: 802.1Q VLAN Support v1.8
[    1.362390] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.372040] Freeing unused kernel memory: 296K (80436000 - 80480000)
[    2.887726] init: Console is alive
[    2.891520] init: - watchdog -
[    4.278086] usbcore: registered new interface driver usbfs
[    4.283799] usbcore: registered new interface driver hub
[    4.289318] usbcore: registered new device driver usb
[    4.301475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.310215] ehci-platform: EHCI generic platform driver
[    4.319363] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.327317] ohci-platform: OHCI generic platform driver
[    4.336163] init: - preinit -
[    5.148612] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.181619] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    8.484735] jffs2: notice: (361) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.502585] mount_root: switching to jffs2 overlay
[    8.518273] urandom-seed: Seeding with /etc/urandom.seed
[    8.810840] procd: - early -
[    8.813863] procd: - watchdog -
[    9.487850] procd: - ubus -
[    9.541721] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.551409] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.560553] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.570163] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.579297] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.589333] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.598611] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.608223] procd: - init -
[   10.064115] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[   10.071796] Backport generated by backports.git backports-20160324-9-g0e38f5c
[   10.122372] batman_adv: B.A.T.M.A.N. advanced 2016.4 (compatibility version 15) loaded
[   10.205329] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   10.216362] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[   10.225034] ath: EEPROM regdomain: 0x0
[   10.225051] ath: EEPROM indicates default country code should be used
[   10.225065] ath: doing EEPROM country->regdmn map search
[   10.225093] ath: country maps to regdmn code: 0x3a
[   10.225109] ath: Country alpha2 being used: US
[   10.225122] ath: Regpair used: 0x3a
[   10.240049] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.248689] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   11.861887] random: jshn: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   11.993063] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   18.833441] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.855566] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[   21.215610] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.255512] device wlan0 entered promiscuous mode
[   21.286637] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.293301] br-pub: port 1(wlan0) entered forwarding state
[   21.298864] br-pub: port 1(wlan0) entered forwarding state
[   21.335689] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[   21.541225] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[   21.594616] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[   22.284927] batman_adv: bat0: Adding interface: mesh0
[   22.290148] batman_adv: bat0: Interface activated: mesh0
[   22.297750] 8021q: adding VLAN 0 to HW filter on device bat0
[   22.362868] device bat0 entered promiscuous mode
[   22.367627] br-pub: port 2(bat0) entered forwarding state
[   22.373200] br-pub: port 2(bat0) entered forwarding state
[   22.718089] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[   23.289035] br-pub: port 1(wlan0) entered forwarding state
[   23.309325] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[   23.317459] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[   24.369054] br-pub: port 2(bat0) entered forwarding state
[   29.389161] batman_adv: bat0: IGMP Querier appeared
[   38.069058] random: nonblocking pool is initialized
[   44.920666] eth0: link up (100Mbps/Full duplex)
[   44.925732] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   45.001214] batman_adv: bat0: Adding interface: eth0
[   45.006233] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[   45.030291] batman_adv: bat0: Interface activated: eth0
[   50.459193] batman_adv: bat0: MLD Querier appeared
[   67.509156] batman_adv: bat0: MLD Querier disappeared - multicast optimizations disabled
[   77.549128] batman_adv: bat0: MLD Querier appeared

My LEDE diffconfig looks like this:

CONFIG_TARGET_ar71xx=y
CONFIG_TARGET_ar71xx_generic=y
CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-bullet-m=y
CONFIG_DEVEL=y
CONFIG_BUSYBOX_CUSTOM=y
CONFIG_ALFRED_NEEDS_lua=y
CONFIG_BUILD_LOG=y
CONFIG_BUSYBOX_CONFIG_MESG=y
CONFIG_BUSYBOX_CONFIG_PKILL=y
CONFIG_BUSYBOX_CONFIG_RDATE=y
# CONFIG_BUSYBOX_CONFIG_SHA256SUM is not set
CONFIG_KMOD_BATMAN_ADV_BATMAN_V=y
CONFIG_KMOD_BATMAN_ADV_BLA=y
CONFIG_KMOD_BATMAN_ADV_DAT=y
CONFIG_KMOD_BATMAN_ADV_DEBUGFS=y
CONFIG_KMOD_BATMAN_ADV_MCAST=y
CONFIG_LIBCURL_COOKIES=y
CONFIG_LIBCURL_FILE=y
CONFIG_LIBCURL_FTP=y
CONFIG_LIBCURL_HTTP=y
CONFIG_LIBCURL_NO_SMB="!"
CONFIG_LIBCURL_POLARSSL=y
CONFIG_LIBCURL_PROXY=y
CONFIG_OPENSSL_ENGINE_CRYPTO=y
CONFIG_OPENSSL_WITH_DEPRECATED=y
CONFIG_OPENSSL_WITH_EC=y
CONFIG_OPENSSL_WITH_NPN=y
CONFIG_OPENSSL_WITH_PSK=y
CONFIG_OPENSSL_WITH_SRP=y
CONFIG_PACKAGE_ALFRED_BATHOSTS=y
CONFIG_PACKAGE_ALFRED_VIS=y
CONFIG_PACKAGE_alfred=y
CONFIG_PACKAGE_batctl=y
CONFIG_PACKAGE_bridge=y
CONFIG_PACKAGE_curl=y
CONFIG_PACKAGE_diffutils=y
# CONFIG_PACKAGE_dnsmasq is not set
# CONFIG_PACKAGE_firewall is not set
CONFIG_PACKAGE_horst=y
CONFIG_PACKAGE_iftop=y
# CONFIG_PACKAGE_ip6tables is not set
CONFIG_PACKAGE_iperf3=y
# CONFIG_PACKAGE_iptables is not set
CONFIG_PACKAGE_kmod-batman-adv=y
CONFIG_PACKAGE_kmod-bridge=y
CONFIG_PACKAGE_kmod-crypto-aead=y
CONFIG_PACKAGE_kmod-crypto-crc32c=y
CONFIG_PACKAGE_kmod-crypto-hash=y
CONFIG_PACKAGE_kmod-crypto-manager=y
CONFIG_PACKAGE_kmod-crypto-null=y
CONFIG_PACKAGE_kmod-crypto-pcompress=y
# CONFIG_PACKAGE_kmod-ip6tables is not set
# CONFIG_PACKAGE_kmod-ipt-conntrack is not set
# CONFIG_PACKAGE_kmod-ipt-core is not set
# CONFIG_PACKAGE_kmod-ipt-nat is not set
# CONFIG_PACKAGE_kmod-lib-crc-ccitt is not set
CONFIG_PACKAGE_kmod-lib-crc16=y
CONFIG_PACKAGE_kmod-lib-crc32c=y
CONFIG_PACKAGE_kmod-llc=y
# CONFIG_PACKAGE_kmod-nf-conntrack is not set
# CONFIG_PACKAGE_kmod-nf-conntrack6 is not set
# CONFIG_PACKAGE_kmod-nf-ipt is not set
# CONFIG_PACKAGE_kmod-nf-ipt6 is not set
# CONFIG_PACKAGE_kmod-nf-nat is not set
# CONFIG_PACKAGE_kmod-ppp is not set
CONFIG_PACKAGE_kmod-stp=y
CONFIG_PACKAGE_libcurl=y
# CONFIG_PACKAGE_libip4tc is not set
# CONFIG_PACKAGE_libip6tc is not set
CONFIG_PACKAGE_liblua=y
CONFIG_PACKAGE_libncursesw=y
CONFIG_PACKAGE_libnetsnmp=y
CONFIG_PACKAGE_libopenssl=y
CONFIG_PACKAGE_libpcap=y
CONFIG_PACKAGE_libpcre=y
CONFIG_PACKAGE_libpolarssl=y
CONFIG_PACKAGE_libpopt=y
CONFIG_PACKAGE_libpthread=y
CONFIG_PACKAGE_librt=y
# CONFIG_PACKAGE_libxtables is not set
CONFIG_PACKAGE_lua=y
# CONFIG_PACKAGE_odhcp6c is not set
# CONFIG_PACKAGE_odhcpd is not set
# CONFIG_PACKAGE_ppp is not set
CONFIG_PACKAGE_procps-ng=y
CONFIG_PACKAGE_procps-ng-free=y
CONFIG_PACKAGE_procps-ng-kill=y
CONFIG_PACKAGE_procps-ng-pgrep=y
CONFIG_PACKAGE_procps-ng-pkill=y
CONFIG_PACKAGE_procps-ng-pmap=y
CONFIG_PACKAGE_procps-ng-ps=y
CONFIG_PACKAGE_procps-ng-pwdx=y
CONFIG_PACKAGE_procps-ng-skill=y
CONFIG_PACKAGE_procps-ng-slabtop=y
CONFIG_PACKAGE_procps-ng-snice=y
CONFIG_PACKAGE_procps-ng-tload=y
CONFIG_PACKAGE_procps-ng-top=y
CONFIG_PACKAGE_procps-ng-uptime=y
CONFIG_PACKAGE_procps-ng-vmstat=y
CONFIG_PACKAGE_procps-ng-w=y
CONFIG_PACKAGE_procps-ng-watch=y
CONFIG_PACKAGE_ptp-utils=y
CONFIG_PACKAGE_rsync=y
CONFIG_PACKAGE_snmpd=y
CONFIG_PACKAGE_tcpdump=y
CONFIG_PACKAGE_terminfo=y
CONFIG_PACKAGE_wget=y
CONFIG_PACKAGE_wireless-tools=y
CONFIG_PACKAGE_zlib=y
CONFIG_RSYNC_zlib=y

My uci show looks like this (system and wireless elided):

alfred.alfred=alfred
alfred.alfred.mode='master'
alfred.alfred.batmanif='bat0'
alfred.alfred.start_vis='1'
alfred.alfred.run_facters='1'
alfred.alfred.interface='br-pub'
alfred.alfred.disabled='0'
batman-adv.bat0=mesh
batman-adv.bat0.bridge_loop_avoidance='0'
dropbear.@dropbear[0]=dropbear
dropbear.@dropbear[0].PasswordAuth='on'
dropbear.@dropbear[0].RootPasswordAuth='on'
dropbear.@dropbear[0].Port='22'
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.pub=interface
network.pub.type='bridge'
network.pub.proto='static'
network.pub.ip6assign='60'
network.pub.ifname='bat0'
network.pub.ipaddr='10.11.x.y'
network.pub.netmask='255.255.252.0'
network.pub.gateway='10.11.x.1'
network.pub.dns='10.11.x.1'
network.mesh=interface
network.mesh.mtu='1532'
network.mesh.proto='batadv'
network.mesh.mesh='bat0'
network.meshwire=interface
network.meshwire.proto='batadv'
network.meshwire.mesh='bat0'
network.meshwire.ifname='eth0'
09.12.2016329Base systemBug ReportVery LowLowAR9341 needs analog switch resetTrunkUnconfirmed Task Description

This is a bug report for the AR9341 SOC on LEDE trunk reboot-2445-gee5a6c1.

I have builded a custom firmware for a unsupported device based on the Atheros DB120 reference board.

The analog port of the ethernet switch needs to be resetted before it can operate.

Part of bootlog without analog reset:

[    2.179262] ag71xx-mdio.1: unknown phy id 'ffff:ffff'

Br-lan is not intialized due no analog switch reset.

Part of bootlog with analog reset:

[    2.059037] ag71xx-mdio.1: Found an AR934X built-in switch

And br-lan is initialized and networking is working fine.

A reset is performed by the function ath79_register_eth (defined in dev-eth.c):

ath79_device_reset_set(AR934X_RESET_ETH_SWITCH);
ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH);

However, no analog reset is performed, for example:

ath79_device_reset_set(AR934X_RESET_ETH_SWITCH);
ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH);

ath79_device_reset_set(AR934X_RESET_ETH_SWITCH_ANALOG);
ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH_ANALOG);

Omitting the analog reset does not break the DB120 builds because the analog reset is already performed by ar934x_nfc_hw_reset in dev-nfc.c.

An easy fix is to do a analog reset in the device’s mach file. However, for the sake of consistency and autism, the reset should be performed by ath79_register_eth in dev_eth.c and not by ar934x_nfc_hw_reset in dev_nfc.c. My AR9341 device doesn’t even use a NAND flash.

12.12.2016331Base systemBug ReportVery LowLowmac80211 / warning / ieee80211_ibss_leave / r2449TrunkUnconfirmed Task Description

spotted on TP-Link 4900 v1 with LEDE r2449 (selfcompiled):

[ 2860.974569] ------------[ cut here ]------------
[ 2860.979191] WARNING: at compat-wireless-2016-10-08/net/mac80211/ibss.c:1082
[ 2860.986142] Modules linked in: ath9k ath9k_common iptable_nat ath9k_hw ath snd_usb_audio nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda snd_usbmidi_lib nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack macvlan iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables compat em_nbyte sch_dsmark sch_pie sch_codel sch_gred sch_htb em_cmp cls_basic act_ipt sch_red sch_prio em_meta act_police em_text sch_tbf sch_sfq sch_fq act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_hfsc sch_ingress ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables ipip tunnel4 ip_tunnel tun snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd soundcore nls_utf8 zram lz4_decompress lz4_compress lzo_compress lzo_decompress zsmalloc usb_storage gpio_keys leds_gpio ehci_fsl ehci_platform ehci_hcd scsi_mod fsl_mph_dr_of mbcache button_hotplug input_core usbcore nls_base usb_common crc16 crc32c_generic crypto_hash [last unloaded: sd_mod]
[ 2861.124825] CPU: 0 PID: 8624 Comm: kworker/u2:0 Not tainted 4.4.36 #0
[ 2861.131337] Workqueue: phy1 ieee80211_ibss_leave [mac80211]
[ 2861.136903] task: c783b840 ti: c68a4000 task.ti: c68a4000
[ 2861.142292] NIP: c99ab128 LR: c99ab354 CTR: 00000000
[ 2861.147247] REGS: c68a5b10 TRAP: 0700   Not tainted  (4.4.36)
[ 2861.152982] MSR: 00029000 <CE,EE,ME>  CR: 28072422  XER: 20000000
[ 2861.159082]
[ 2861.159082] GPR00: c99ab004 c68a5bc0 c783b840 00000000 c68a5bf4 00000000 00000001 00000000
[ 2861.159082] GPR08: c724b114 00000001 c99f97f6 00000000 000000ff 00000000 c003c474 c790bfe0
[ 2861.159082] GPR16: c6f0f070 00000fff 00000fff c70b2138 c6ae5800 c6e30b40 00000000 00000087
[ 2861.159082] GPR24: 00000000 c68a5c68 c724b114 00000000 c6e30b40 c6e7a3d8 c6f25420 c6f0f070
[ 2861.188805] NIP [c99ab128] ieee80211_get_vht_mask_from_cap+0x1964/0x1c64 [mac80211]
[ 2861.196468] LR [c99ab354] ieee80211_get_vht_mask_from_cap+0x1b90/0x1c64 [mac80211]
[ 2861.204025] Call Trace:
[ 2861.206481] [c68a5bc0] [c99ab004] ieee80211_get_vht_mask_from_cap+0x1840/0x1c64 [mac80211] (unreliable)
[ 2861.215884] [c68a5c60] [c99ab414] ieee80211_get_vht_mask_from_cap+0x1c50/0x1c64 [mac80211]
[ 2861.224156] [c68a5d30] [c99ab9d0] ieee80211_ibss_rx_queued_mgmt+0x264/0x370 [mac80211]
[ 2861.232081] [c68a5e20] [c99acc44] ieee80211_ibss_leave+0x768/0x1770 [mac80211]
[ 2861.239307] [c68a5e80] [c00379f8] process_one_work+0x208/0x380
[ 2861.245135] [c68a5ea0] [c0037de0] worker_thread+0x270/0x48c
[ 2861.250704] [c68a5ef0] [c003c53c] kthread+0xc8/0xcc
[ 2861.255580] [c68a5f40] [c000cb3c] ret_from_kernel_thread+0x5c/0x64
[ 2861.261752] --- interrupt: 0 at   (null)
[ 2861.261752]     LR =   (null)
[ 2861.268618] Instruction dump:
[ 2861.271578] 38810034 387e0510 7f984800 419e024c 4bf410ed 2f830000 40be0030 3d40c9a0
[ 2861.279336] 394a97f6 3b600001 892a0003 69290001 <0f090000> 2f890000 41be01d0 39200001
[ 2861.287267] ---[ end trace a37b58c3292c2cbf ]---

13.01.2017385Base systemBug ReportVery LowLowrampis / JFFS2-problem / Xiaomi Miwifi mini / r2919 / w...TrunkUnconfirmed Task Description

after flashing r2919 i can see strange message with dmesg:

root@lede:~  dmesg | grep -i jffs
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.638380] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    9.908794] jffs2: Node at 0x00000044 with length 0x00001044 would run over the end of the erase block
[    9.918337] jffs2: Perhaps the file system was created with the wrong erase size?
[    9.926009] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000048: 0x1044 instead
[    9.935697] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000004c: 0x586d instead
[    9.945403] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000050: 0x0002 instead
[    9.955094] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000054: 0x0002 instead
[    9.964797] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000058: 0x81a4 instead
[    9.974488] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000060: 0xd8a2 instead
[    9.984190] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000064: 0x9ad1 instead
[    9.993881] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000068: 0x9ad2 instead
[   10.003587] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000006c: 0x9ad2 instead
[   10.013278] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000074: 0x1000 instead
[   10.022959] jffs2: Further such events for this erase block will not be printed
[   11.479386] jffs2: notice: (377) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   11.496420] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   11.525523] jffs2: Node at 0x00000044 with length 0x00001044 would run over the end of the erase block
[   11.535100] jffs2: Perhaps the file system was created with the wrong erase size?
[   11.542896] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000048: 0x1044 instead
[   11.552600] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000004c: 0x586d instead
[   11.562304] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000050: 0x0002 instead
[   11.571994] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000054: 0x0002 instead
[   11.581696] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000058: 0x81a4 instead
[   11.591387] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000060: 0xd8a2 instead
[   11.601089] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000064: 0x9ad1 instead
[   11.610780] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000068: 0x9ad2 instead
[   11.620481] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000006c: 0x9ad2 instead
[   11.630173] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000074: 0x1000 instead
[   11.639854] jffs2: Further such events for this erase block will not be printed
[   13.095966] jffs2: notice: (374) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   14.064922] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   14.086950] mount_root: switching to jffs2 overlay
root@lede:~  

beside that, it seems that the device is working:

root@lede:~  df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 3.5M      3.5M         0 100% /rom
tmpfs                    61.5M      1.1M     60.4M   2% /tmp
/dev/mtdblock6           10.8M    796.0K     10.0M   7% /overlay
overlayfs:/overlay       10.8M    796.0K     10.0M   7% /
tmpfs                   512.0K         0    512.0K   0% /dev
tmpfs                     2.0M         0      2.0M   0% /coredumps
13.01.2017386Base systemBug ReportVery LowLowConfig option "list channels" doesn't workTrunkUnconfirmed Task Description

Hi,

the option “list channels” is not working.

Patch which implements the function: https://patchwork.ozlabs.org/patch/536533/

LEDE version: SNAPSHOT r2790-08d73bf

Device: Archer C5

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11a'
	option path 'pci0000:01/0000:01:00.0'
	option country 'DE'
	option htmode 'VHT80'
	option txpower '12'
	option channel 'auto'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'yyy'
	option encryption 'psk2+ccmp'
	option key 'xxx'
	option disabled '1'

config wifi-device 'radio1'
	option type 'mac80211'
	option hwmode '11g'
	option path 'platform/qca955x_wmac'
	option channel 'auto'
	option country 'DE'
	option txpower '20'
	option htmode 'HT40'
	list channels 13
        list channels 12

config wifi-iface 'default_radio1'
	option device 'radio1'
	option network 'lan'
	option mode 'ap'
	option encryption 'psk2+ccmp'
	option key 'xxx'
	option ssid 'yyy'


Ends with a 2.4GHz wlan which is not
visible and iwinfo shows the following information:

Mode: Master Channel: unknown (2.407 GHz)

root@lede:~# iwinfo wlan1 freqlist
  2.412 GHz (Channel 1)
  2.417 GHz (Channel 2)
  2.422 GHz (Channel 3)
  2.427 GHz (Channel 4)
  2.432 GHz (Channel 5)
  2.437 GHz (Channel 6)
  2.442 GHz (Channel 7)
  2.447 GHz (Channel 8)
  2.452 GHz (Channel 9)
  2.457 GHz (Channel 10)
  2.462 GHz (Channel 11)
  2.467 GHz (Channel 12)
  2.472 GHz (Channel 13)

A part of the syslog with a bunch of error messages is attached.

Fell free to ask, if something is missing.

15.01.2017389Base systemBug ReportVery LowLowodhcpd relay mode is blocked by firewall by defaultTrunkUnconfirmed Task Description

odhcpd currently won’t work when put in relay mode if followed the manual naively. Turns out this is because firewall blocks incoming traffic to DHCPv6 server (port 547) from external DHCPv6 servers (port 547) from WAN zone by default. It may be a good idea to allow this out of the box, though I’m unsure if there are any security complications from this – I’m a newcomer to IPv6. Replies come with the source global IPv6 address of DHCPv6 server to the global IPv6 address of the router, so it’s difficult to make a more constrained rule without hardcoding them or at least the prefix.

Example rule which fixes relay mode:

config rule
	option enabled '1'
	option target 'ACCEPT'
	option src 'wan'
	option proto 'udp'
	option dest_port '547'
	option name 'Allow DHCPv6 Relay'
	option family 'ipv6'
	option src_port '547'

LEDE revision: 3e7b894ac08b56343e6e449a38fdb2be7b02a127

17.01.2017394Base systemBug ReportVery LowLowPPPoE/802.1Q issues on Linksys WRT1900ACSTrunkUnconfirmed Task Description

Device: Linksys WRT1900ACS
LEDE commit: b9a408c2b49ccfa0e906bda00ef77f4002e401fd

diffconfig:
CONFIG_TARGET_mvebu=y
CONFIG_TARGET_mvebu_DEVICE_linksys-wrt1900acs=y
CONFIG_TARGET_BOARD=”mvebu” CONFIG_LIBSODIUM_MINIMAL=y
CONFIG_PACKAGE_dnscrypt-proxy=y
CONFIG_PACKAGE_dnscrypt-proxy-resolvers=y
CONFIG_PACKAGE_libsodium=y

I have an ISP that requires PPPoE on vlan 201 with 802.1Q tags (CenturyLink fiber). On OpenWRT 15.05.1 and on earlier versions of LEDE (not sure about an exact revision, but maybe October/November timeframe) I could simply define my wan interface in /etc/config/network like this and it just worked:

```
config interface ‘wan’

  option ifname 'eth0.201'
  option proto 'pppoe'
  option username 'user@provider'
  option password 'password'

```

I can’t find any way to make this work on recent versions of LEDE. I’ve tried new builds at least every few weeks, but none have worked for the past few months. I’ve tried configuring the switch_vlan section by adding a ‘t’ after the appropriate switch port to enable tagging, I’ve tried defining a new interface and then using that as the wan ifname, and I’ve tried the command line `ip link` and `ppp` invocations that work on every other linux system I’ve tried, but I can’t find anything that works on recent versions of LEDE.

On other linux systems I can do roughly the following and it works:

```
ip link add link eth0 name eth0.201 type vlan id 201
ip link set eth0.201 up
pppd call centurylink
```

where /etc/ppp/peers/centurylink and /etc/ppp/chap-secrets looks like this:
```
> cat /etc/ppp/peers/centurylink
plugin rp-pppoe.so

eth0.201
name “user@provider” usepeerdns
persist
defaultroute
hide-password
noauth

cat /etc/ppp/chap-secrets
#USERNAME PROVIDER PASSWORD IPADDRESS
user@provider * password
```

I’ve tried using tcpdump to capture what’s happening and on other systems (Ubuntu 16.10, Debian Jessie, pfsense) I see an 802.1Q tag, but I don’t see that on LEDE. That might be expected though because it seems totally possible that the switch itself is doing the 802.1Q stuff and tcpdump doesn’t see the actual packets sent over the wire. I have no idea if that’s the case, though. I guess I could also try this on OpenWRT as well, but I haven’t taken the time to do that yet.

The only other difference I’ve seen is that by default LEDE doesn’t send a Host-Uniq tag, but even if I set the host_uniq uci config it doesn’t fix things. Regardless of what I do I see logs that look like this:

```
Tue Jan 17 01:55:26 2017 daemon.notice netifd: Interface ‘wan’ is now down
Tue Jan 17 01:55:26 2017 daemon.notice netifd: Interface ‘wan’ is disabled
Tue Jan 17 01:55:26 2017 daemon.notice netifd: Interface ‘wan’ has link connectivity loss
Tue Jan 17 01:55:26 2017 kern.info kernel: [23415.581135] mvneta f1034000.ethernet eth0: configuring for fixed link mode
Tue Jan 17 01:55:26 2017 kern.info kernel: [23415.588150] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Tue Jan 17 01:55:26 2017 kern.info kernel: [23415.594095] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Tue Jan 17 01:55:26 2017 daemon.notice netifd: Interface ‘wan’ is enabled
Tue Jan 17 01:55:26 2017 daemon.notice netifd: Network device ‘eth0’ link is up
Tue Jan 17 01:55:26 2017 daemon.notice netifd: VLAN ‘eth0.201’ link is up
Tue Jan 17 01:55:26 2017 daemon.notice netifd: Interface ‘wan’ has link connectivity
Tue Jan 17 01:55:26 2017 daemon.notice netifd: Interface ‘wan’ is setting up now
Tue Jan 17 01:55:26 2017 kern.info kernel: [23415.602431] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Jan 17 01:55:26 2017 daemon.info pppd[2263]: Plugin rp-pppoe.so loaded.
Tue Jan 17 01:55:26 2017 daemon.info pppd[2263]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Tue Jan 17 01:55:26 2017 daemon.notice pppd[2263]: pppd 2.4.7 started by root, uid 0
...
Tue Jan 17 01:55:41 2017 daemon.warn pppd[2263]: Timeout waiting for PADO packets
Tue Jan 17 01:55:41 2017 daemon.err pppd[2263]: Unable to complete PPPoE Discovery
Tue Jan 17 01:55:41 2017 daemon.info pppd[2263]: Exit.
```

A sample /etc/config/network looks like this:
```
config interface ‘loopback’

      option ifname 'lo'
      option proto 'static'
      option ipaddr '127.0.0.1'
      option netmask '255.0.0.0'

config globals ‘globals’

      option ula_prefix 'fd25:2a59:2a7b::/48'

config interface ‘lan’

      option type 'bridge'
      option ifname 'eth1'
      option proto 'static'
      option ipaddr '192.168.2.1'
      option netmask '255.255.255.0'
      option ip6assign '60'

config interface ‘wan’

  option ifname 'eth0.201'
  option proto 'pppoe'
  option username 'user@provider'
  option password 'password'

config switch

      option name 'switch0'
      option reset '1'
      option enable_vlan '1'

config switch_vlan

      option device 'switch0'
      option vlan '1'
      option ports '0 1 2 3 6'

config switch_vlan

      option device 'switch0'
      option vlan '2'
      option ports '4 5'

config interface ‘guest’

      option _orig_ifname 'wlan1'
      option _orig_bridge 'false'
      option proto 'static'
      option ipaddr '192.168.3.1'
      option netmask '255.255.255.0'

```

Interestingly, OpenWRT has exactly the same version of ppp and rp-pppoe (2.4.7 and 3.8p, respectively) so it seems like there’s something else in play and my guess is it’s related to vlan tagging, but I don’t seem to have the same issue as FS#227 which mentions both PPPoE and vlan config, but it is quite difficult to follow the discussion there so maybe I’m missing something.

18.01.2017400PackagesBug ReportVery LowLowodhcpd: lease file persistence per RFC2131 S-2.1 and S-...TrunkUnconfirmed Task Description

RFC2131 DHCPv4 expects that the DHCP leases and other configuration results are in persistent storage. For small embedded routers during a machine reboot, it has been accepted that read-write memory is RAM (not flash) and persistence may not be entirely upheld. That being said, odhcpd has no means to maintain the lease information even through an application only restart (example ifup event). The lease file odhcpd writes is not used to seed odhcpd, if it is restarted. (1) an interface reconnect that causes odhcpd to restart destroys the lease record, even if the network resumes as previously configured. (2) even if odhcpd lease file is directed to persistent storage (USB drive) it is not used to resume leases.

24.01.2017427Base systemBug ReportVery LowMediumSwitch broken with WRT3200ACM (removes wifi adapters an...TrunkUnconfirmed Task Description

- Device problem occurs on:

WRT3200ACM

- Software versions of LEDE release, packages, etc.:

master tree (and v17.01), bisected to f24ffb901e0408917748773b883841eca52eea05.

- Steps to reproduce

* Flash a recent LEDE snapshot on the WRT3200ACM (and factory reset),
* enable wifi (2 or 5 Gz) → Wifi works
* disable wifi → errors in the dmesg about not being able to set a feature (can’t remember the exact error)
* re-enable wifi → errors in the dmesg saying that the adapter does not exist. This gets shouted in the dmesg every 5 seconds

A reboot doesn’t fix the issue. I need to downgrade the firmware prior to f24ffb901e0408917748773b883841eca52eea05 and factory reset to get the wifi adapters back.

For the Vlan bridge, symptoms are easier to detect:
* create a new adapter bridged on eth0.100 eth1.100
* no traffic goes through it. An snapshot before f24ffb901 used to work
(the setup is the Free french provider which has a vlan between the modem and the TV adapter over VLAN 100. So the LEDE box should act like a pass-through here only)

I bisected to the commit mentioned above (which, to me seems suspicious given that the driver is for mvsw61xx and the switch in the WRT3200ACM is MV88E6352, so a different generation). I don’t have enough knowledge of the chip to understand why this fails, but I don’t feel confident enough to simply send a PR with the revert.

Reverting f24ffb901e on top of master makes the Wifi and VLAN back to normal.


28.01.2017441Base systemBug ReportVery LowLowKernel crash: eth0 (ag71xx): transmit queue 0 timed outTrunkUnconfirmed Task Description

Device: TL-WR1043ND v1
LEDE: snapshot r3189-12db207

During a simultaneous bidirectional iperf load test, after about 20 minutes, the kernel crashes. I reproduced this several times:

Server 1 ←–> 1043ND ←–> Laptop via wireless N

LEDE is using a default setup. Only changes:
* Setting wireless encryption to psk with password
* Setting a DNAT rule for server 1 to be able reach the iperf server on the Laptop

This bug was actually discovered while testing fixes for  FS#13  - Ath9k AP stays up for connected clients but doesn’t show in scan on new ones

Serial console ouput:

[ 1294.022551] ------------[ cut here ]------------
[ 1294.027247] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:306 dev_watchdog+0x1dc/0x260()
[ 1294.035754] NETDEV WATCHDOG: eth0 (ag71xx): transmit queue 0 timed out
[ 1294.042319] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nn
[ 1294.106287] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.45 #0
[ 1294.112066] Stack : 803e4844 00000000 00000001 80440000 8042f1dc 8042ee63 803c5e64 00000000
          804a378c 8042d4fc 00000200 00100000 0000000a 800a7618 803cb554 80430000
          00000003 8042d4fc 803c9960 81809e34 0000000a 800a5594 00000006 00000000
          00000000 801f5400 00000000 00000000 00000000 00000000 00000000 00000000
          00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
          ...
[ 1294.148122] Call Trace:
[ 1294.150617] [<800a7618>] vprintk_default+0x24/0x30
[ 1294.155474] [<800a5594>] printk+0x2c/0x38
[ 1294.159515] [<801f5400>] wait_for_xmitr+0x84/0xcc
[ 1294.164289] [<80081c3c>] warn_slowpath_common+0xa0/0xd0
[ 1294.169564] [<801a72dc>] dump_stack+0x14/0x28
[ 1294.173975] [<80071eb0>] show_stack+0x50/0x84
[ 1294.178376] [<80081c3c>] warn_slowpath_common+0xa0/0xd0
[ 1294.183661] [<8028ef3c>] dev_watchdog+0x1dc/0x260
[ 1294.188408] [<80081c98>] warn_slowpath_fmt+0x2c/0x38
[ 1294.193450] [<8028ef3c>] dev_watchdog+0x1dc/0x260
[ 1294.198191] [<8028ed60>] dev_watchdog+0x0/0x260
[ 1294.202782] [<800b08d0>] call_timer_fn.isra.5+0x24/0x80
[ 1294.208051] [<800b0b54>] run_timer_softirq+0x1b4/0x1fc
[ 1294.213248] [<800a89f0>] handle_irq_event_percpu+0x154/0x188
[ 1294.218960] [<800841b8>] __do_softirq+0x250/0x298
[ 1294.223721] [<800abdac>] handle_percpu_irq+0x50/0x80
[ 1294.228746] [<8006a9e0>] plat_irq_dispatch+0xd4/0x10c
[ 1294.233848] [<80060bf4>] handle_int+0x134/0x140
[ 1294.238400] 
[ 1294.239904] ---[ end trace 17bad011a41ccba7 ]---
[ 1294.244567] eth0: tx timeout
[ 1299.022570] eth0: tx timeout
[ 1304.022581] eth0: tx timeout
[ 1309.022588] eth0: tx timeout

The eth0: tx timeout line is repeated every 5 seconds.


01.02.2017449Base systemBug ReportVery LowLowrelayd can cause dropped packets if client has /proc/sy...TrunkUnconfirmed Task Description

DEVICE: N/A (can be reproduced on any system running relayd)
LEDE version: N/A (can be reproduced on a VM running debian with relayd installed)

Steps to reproduce:

* Run relayd on a system (aka router)with two interfaces.
* Run a stock Ubuntu-16.04 system (aka client) connected to the managed interface.
* Run another system (aka server) on the other interface of relayd system.
* Have server ping client and watch connectivity drop out periodically.
* Have client ping server and watch connectivity drop out periodically.

Our fix for the problem need two changes:

* Add arptables rules to system to handle kernel level arp requests properly via mangling the source address in the arp requests
* Modify relayd to send the correct src addr in the arp requests that it generates.

Our changes to relayd are here:

* https://github.com/troth/relayd/commit/c8d895ee71be59262f01c3fdf50f307ebf1593e7

From commit message for my fix:

    Add option to set arp src addr for managed interfaces.
    
    Relayd will send arp requests out a managed interface like this:
    
        Who has 192.168.1.40, tell 192.168.2.1
    
    In most cases, this works, but some clients will not send a reply (on
    linux, client will not reply if /proc/sys/net/ipv4/conf/*/rp_filter is
    set to 1, which happens to be the default on ubuntu-16.04).
    
    Add '-s' option to tell relayd to use the specified addr as the arp src
    addr for managed interfaces. The arp requests would then look like:
    
        Who has 192.168.1.40, tell 192.168.1.100
    
    for which the client properly sends a reply.
    
    The symptoms of the problem manifest as dropped packets due to the
    kernel marking the arp entry for the client as FAILED due to lack of
    responses to the arp requests. Eventually (10-30 seconds later), the arp
    table is updated and connectivity is restored.
04.02.2017461Base systemBug ReportVery LowMediumMass Cascade of DHCP ULA Prefix Assignments with DHCP-P...AllUnconfirmed Task Description

Here is one that gets a bit ugly. Lets say we chain a bunch of LEDE based routers together. Lets also enable a nice numbering system in IP4 and IP6. Lets enable DHCP-PD through the network, because our ISP was generous with a /56. The IP4 is only static and is easy to control, see table below. Its tedious, but easy. The problem is in parallel the IP6 addresses compound in the ULA region. Each router DHCP-PD the ULA above it, and gets its own ULA from Global settings in Network UCI. There seems no easy way to control this mass cascade of ULA, and get good fail over.

Ideal Requirements:
(1) If router above is unavailable, then next tier router uses ULA (network global UCI) to begin assigning addresses to clients and subnets.
(2) If router above is available, then next tier router expires its self-generated ULA and subnets, and gets ULA from delegation above to then re-delegate to subnets.
(*) Bonus: make some parts optional

IP4 WAN Name Serves Subnet
(NAT) Router-1 172.16.0.1/24
172.16.0.2 Router-2A 172.17.0.1/24
172.17.0.2 Router-3A 172.24.0.1/24
172.17.0.3 Router-3B 172.25.0.1/24
172.16.0.3 Router-2B 172.18.0.1/24

IP6 Roots Name Serves Subnet Delegates Subnet
2001:db8/56 Router-1 2001:db8::1/64 2001:db8:0:10/60
fd00:ac10/48 fd00:ac10::1/64 2001:db8:0:20/60

                                                fd00:ac10:0:10/60
                                                fd00:ac10:0:20/60

2001:db8:0:10/60 Router-2A 2001:db8:0:10::1/64 2001:db8:0:14/62
fd00:ac10:0:10/60 fd00:ac10:0:10::1/64 2001:db8:0:18/62
fd00:ac11/48 fd00:ac11::1/64 fd00:ac10:0:14/62

                                                fd00:ac10:0:18/62
                                                fd00:ac11:0:14/62
                                                fd00:ac11:0:18/62

* please, i don’t want to type more. see how the ULA prefixes just keep multiplying.
** ‘172.16’ = ‘ac10’

04.02.2017463Base systemBug ReportVery LowLowup/down on a usbnet interfaces fails to reassign ULA ad...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: anything running usbnet
- Software versions of LEDE release, packages, etc: head
- Steps to reproduce:

Install the usbnet package, enable a usb0 device in /etc/config/network

(in my case this is a c.h.i.p, but most hackerboards except the pi do usbnet)

config interface ‘usb0’

      option ifname 'usb0'            
      option proto 'static'                 
      option ipaddr '172.26.97.200'
      option netmask '255.255.255.255'
      option ip6assign '64'           
      option ip6class 'local' 

So long as the chip beats the router to booting, this gives it an ipv4 and ipv6 ULA out of the pool.

Reboot the device on the other side. The kernel deregisters and registers the usbnet driver, and netifd assigns the ipv4 address again.

However the ip6 subnet that was assigned from the ula does not come back. Haven’t tried it with a public address.

ifup/ifdown does not work and the ifstatus usb0 does not show any ipv6 addresses assigned.

07.02.2017479Base systemBug ReportVery LowLowSoftethervpn results in ReAlloc error after vpnbridge i...TrunkUnconfirmed Task Description

On a mostly vanilla Atmel at91sam9g20-ek with 32MB of RAM, we are seeing a couple of errors using the current package software version + patches.

Overall, it may be the cross compilation process, overlay or something else entirely.

1. If the vpnbridge is already started, a NAND-WAIT stacktrace results if the binary is executed to instantiate a second instance.

root@lede:/usr/libexec/softethervpn# /usr/bin/env LANG=en_US.UTF-8 vpncmd
[  241.880000] 
[  241.880000] =================================
[  241.880000] [ INFO: inconsistent lock state ]
[  241.880000] 4.4.36 #0 Not tainted
[  241.880000] ---------------------------------
[  241.880000] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
[  241.880000] kswapd0/155 [HC0[0]:SC0[0]:HE1:SE1] takes:
[  241.880000]  (&f->sem){+.+.?.}, at: [<c012949c>] jffs2_do_clear_inode+0x28/0x114
[  241.880000] {RECLAIM_FS-ON-W} state was registered at:
[  241.880000]   [<c005047c>] lockdep_trace_alloc+0xf8/0x118
[  241.880000]   [<c00b5610>] kmem_cache_alloc+0x28/0x144
[  241.880000]   [<c01261d8>] jffs2_alloc_inode_cache+0x1c/0x28
[  241.880000]   [<c01293a4>] jffs2_do_read_inode+0x13c/0x20c
[  241.880000]   [<c012fe58>] jffs2_iget+0x74/0x324
[  241.880000]   [<c0130830>] jffs2_do_fill_super+0x190/0x274
[  241.880000]   [<c0130e98>] jffs2_fill_super+0xf4/0x144
[  241.880000]   [<c01d1528>] mount_mtd_aux+0x80/0x10c
[  241.880000]   [<c01d1630>] mount_mtd_nr+0x7c/0x94
[  241.880000]   [<c01d17f8>] mount_mtd+0x1b0/0x210
[  241.880000]   [<c01309d4>] jffs2_mount+0x1c/0x28
[  241.880000]   [<c00bbbe4>] mount_fs+0x1c/0xac
[  241.880000]   [<c00d6418>] vfs_kern_mount+0x5c/0x12c
[  241.880000]   [<c00d9e68>] do_mount+0xa04/0xbc8
[  241.880000]   [<c00da270>] SyS_mount+0x7c/0xa8
[  241.880000]   [<c0009660>] ret_fast_syscall+0x0/0x1c
[  241.880000] irq event stamp: 45867
[  241.880000] hardirqs last  enabled at (45867): [<c001508c>] _raw_spin_unlock_irq+0x2c/0x6c
[  241.880000] hardirqs last disabled at (45866): [<c0014e88>] _raw_spin_lock_irq+0x28/0x70
[  241.880000] softirqs last  enabled at (45450): [<c0024088>] __do_softirq+0x208/0x2a4
[  241.880000] softirqs last disabled at (45431): [<c0024488>] irq_exit+0xa4/0xec
[  241.880000] 
[  241.880000] other info that might help us debug this:
[  241.880000]  Possible unsafe locking scenario:
[  241.880000] 
[  241.880000]        CPU0
[  241.880000]        ----
[  241.880000]   lock(&f->sem);
[  241.880000]   <Interrupt>
[  241.880000]     lock(&f->sem);
[  241.880000] 
[  241.880000]  *** DEADLOCK ***
[  241.880000] 
[  241.880000] 2 locks held by kswapd0/155:
[  241.880000]  #0:  (shrinker_rwsem){++++..}, at: [<c0090034>] shrink_slab.part.1.constprop.7+0x30/0x230
[  241.880000]  #1:  (&type->s_umount_key#32){.+.+..}, at: [<c00bb3ec>] trylock_super+0x1c/0x60
[  241.880000] 
[  241.880000] stack backtrace:
[  241.880000] CPU: 0 PID: 155 Comm: kswapd0 Not tainted 4.4.36 #0
[  241.880000] Hardware name: Atmel AT91SAM9
[  241.880000] Backtrace: 
[  241.880000] [<c0019798>] (dump_backtrace) from [<c0019994>] (show_stack+0x18/0x1c)
[  241.880000]  r7:0000000a r6:c38af4c0 r5:c38af0c0 r4:c068f314
[  241.880000] [<c001997c>] (show_stack) from [<c016fdd8>] (dump_stack+0x20/0x28)
[  241.880000] [<c016fdb8>] (dump_stack) from [<c004d144>] (print_usage_bug.part.11+0x228/0x290)
[  241.880000] [<c004cf1c>] (print_usage_bug.part.11) from [<c004d5b0>] (mark_lock+0x404/0x63c)
[  241.880000]  r8:c004c558 r7:c38af0c0 r6:c38af4c0 r5:00000008 r4:0000000a
[  241.880000] [<c004d1ac>] (mark_lock) from [<c004e638>] (__lock_acquire+0x97c/0x198c)
[  241.880000]  r10:c38af0c0 r9:c0667044 r8:c38af4c0 r7:00000001 r6:00000002 r5:c3675704
[  241.880000]  r4:0000025d r3:00000004
[  241.880000] [<c004dcbc>] (__lock_acquire) from [<c004fdcc>] (lock_acquire+0x7c/0x9c)
[  241.880000]  r10:00000042 r9:c334c4c4 r8:c38af0c0 r7:c0ccdd8c r6:00000001 r5:60000013
[  241.880000]  r4:00000000
[  241.880000] [<c004fd50>] (lock_acquire) from [<c0011580>] (mutex_lock_nested+0x50/0x39c)
[  241.880000]  r6:c334d000 r5:c334d000 r4:c36756d0
[  241.880000] [<c0011530>] (mutex_lock_nested) from [<c012949c>] (jffs2_do_clear_inode+0x28/0x114)
[  241.880000]  r10:00000042 r9:c334c4c4 r8:c334c000 r7:00000058 r6:c334d000 r5:c334d000
[  241.880000]  r4:c36756d0
[  241.880000] [<c0129474>] (jffs2_do_clear_inode) from [<c012fde0>] (jffs2_evict_inode+0x34/0x38)
[  241.880000]  r7:00000058 r6:c044ba88 r5:c334d000 r4:c3675730
[  241.880000] [<c012fdac>] (jffs2_evict_inode) from [<c00d1a7c>] (evict+0xac/0x164)
[  241.880000]  r5:c367580c r4:c3675730
[  241.880000] [<c00d19d0>] (evict) from [<c00d1b6c>] (dispose_list+0x38/0x44)
[  241.880000]  r7:00000058 r6:00000063 r5:00000006 r4:c392dd58
[  241.880000] [<c00d1b34>] (dispose_list) from [<c00d2e1c>] (prune_icache_sb+0x4c/0x5c)
[  241.880000]  r5:00000006 r4:c392dd58
[  241.880000] [<c00d2dd0>] (prune_icache_sb) from [<c00bb570>] (super_cache_scan+0x140/0x184)
[  241.880000]  r5:00000000 r4:c392ddd8
[  241.880000] [<c00bb430>] (super_cache_scan) from [<c00901b0>] (shrink_slab.part.1.constprop.7+0x1ac/0x230)
[  241.880000]  r10:00000601 r9:00000000 r8:00000000 r7:00000400 r6:00000062 r5:c334c4c4
[  241.880000]  r4:000000a5
[  241.880000] [<c0090004>] (shrink_slab.part.1.constprop.7) from [<c0092318>] (shrink_zone+0x5f0/0x640)
[  241.880000]  r10:00000004 r9:00000117 r8:c04da918 r7:00000000 r6:00000000 r5:c392ded4
[  241.880000]  r4:c04da6fc
[  241.880000] [<c0091d28>] (shrink_zone) from [<c0092c8c>] (kswapd+0x4ac/0x668)
[  241.880000]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c04da6fc
[  241.880000]  r4:c04da6fc
[  241.880000] [<c00927e0>] (kswapd) from [<c003d1b4>] (kthread+0xe4/0xfc)
[  241.880000]  r10:00000000 r9:00000000 r8:00000000 r7:c00927e0 r6:c04da6fc r5:00000000
[  241.880000]  r4:c3950780
[  241.880000] [<c003d0d0>] (kthread) from [<c00096ec>] (ret_from_fork+0x14/0x28)
[  241.880000]  r7:00000000 r6:00000000 r5:c003d0d0 r4:c3950780

2. If the vpnbridge is instantiated only once, and the vpn client is to be executed, a realloc error occurs:

 /usr/bin/env LANG=en_US.UTF-8 ./vpnclient 
Fatal Error: InternalReAlloc: error: realloc() failed.


Aborted

This is on 4.4.36 LEDE trunk with a FS that looks like:

Filesystem                Size      Used Available Use% Mounted on
/dev/root                 7.4M      7.4M         0 100% /rom
tmpfs                    25.3M      2.7M     22.6M  11% /tmp
tmpfs                    25.3M     44.0K     25.2M   0% /tmp/root
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/mtdblock2           50.0M      2.2M     47.8M   4% /overlay
overlayfs:/overlay       50.0M      2.2M     47.8M   4% /

Any assistance would be helpful.


09.02.2017488Base systemBug ReportVery LowMediumdynamic VLAN doesn't work on ath10kopenwrt-19.07Unconfirmed Task Description

Dynamic vlan config on ath10k seems not to work. Same config on ath9k works fine.

Config:

config wifi-device  radio0
        option type     mac80211
        option channel  36
        option hwmode   11a
        option path     'pci0000:01/0000:01:00.0'
        option htmode   VHT80
[...]

config wifi-iface
        option device   radio0
        option network  vlan1
        option mode     ap
[...]
        option dynamic_vlan     '1'
        option 'vlan_tagged_interface' 'eth1'
        option 'vlan_bridge' 'br-vlan'
        option 'vlan_naming' '0'

Log:

Thu Feb  9 15:54:37 2017 daemon.err hostapd: WPA initialization for VLAN 1 failed (-1)
Thu Feb  9 15:54:37 2017 daemon.err hostapd: WPA deinit of wlan0.1 failed
Thu Feb  9 15:54:37 2017 daemon.debug hostapd: wlan0: STA ac:22:0b:a1:c7:6b IEEE 802.11: could not add dynamic VLAN interface for vlan=1
11.02.2017499Base systemBug ReportVery LowLowWiFi client mode leaves router inaccessible if upstream...TrunkUnconfirmed Task Description

This bug was originally reported to the OpenWrt team and there is a discussion of it in their mailing list. Luiz Angelo Daros de Luca suggested reporting here (and switching to LEDE, which I will do).

I have a TP-Link TL-MR3020 v1.9 with Chaos Calmer 15.05.01. I’m using it to provide a WiFi access point to my phone/tablet while I travel, and it’s acting as a WiFi client for the various hostels I visit.

If you configure it as a wifi client with a wwan interface using the LuCI scan/join wizard, and then you configure a wifi access point on the same radio, the router works as expected and when you connect to the router’s AP, you get Internet via the client connection.

However, if you move out of range of the network the router is a client of, or if it goes down, when you power off the OpenWrt router and power back on, the access point won’t come up.

The AP will only come up if the client network you configured is also working; so you have no way to connect to the router over wifi, and no way to reconfigure the router, if that client network is down or out of range.

This is a particular problem for a travel router because it will often move it out of range of the original upstream network, and you may only have a wifi-capable device with which to reconfigure it.

The Ethernet port on the router does remain active, so I can tell it does actually boot. It’s just the radio that doesn’t come up. I managed to get back in range of a network once, and the router worked as expected.

It doesn’t matter whether the AP or client connection are configured first or second on the radio interface, and, unticking “bring up on boot” for the wwan interface has no effect on the behaviour.

Steps to reproduce: Connect the router to a wifi network as a client using the Join wizard. Add a wifi master-mode access point on the same radio interface. Verify you can access the Internet by joining the router’s new master AP. Reboot the router with the original network it was a client of turned off. Notice the router’s AP you configured never comes up.

Expected behaviour: The master access point of the router should always come up, regardless of the availability of the client network.

The OpenWRT team will not fix it, but had some explanation as to why it is happening. IMO, it’s still a very frustrating bug and most users would expect the behaviour I did.

12.02.2017500Base systemBug ReportVery LowLowfirewall3: missing targets with IPv6 NATopenwrt-18.06Unconfirmed Task Description

When the kmod-ipt-nat6 package is installed, running /etc/init.d/firewall reload or /etc/init.d/firewall restart produces warnings that targets are missing:

 * Populating IPv6 nat table
   * Zone 'lan'
Warning: fw3_ipt_rule_append(): Can't find target 'prerouting_lan_rule'
Warning: fw3_ipt_rule_append(): Can't find target 'postrouting_lan_rule'
   * Zone 'wan'
Warning: fw3_ipt_rule_append(): Can't find target 'prerouting_wan_rule'
Warning: fw3_ipt_rule_append(): Can't find target 'postrouting_wan_rule'
Warning: fw3_ipt_rule_append(): Can't find target 'prerouting_rule'
Warning: fw3_ipt_rule_append(): Can't find target 'postrouting_rule'

I tested this on an Archer C7 v2 running LEDE 17.01.0rc2.

13.02.2017506Base systemBug ReportVery LowMediumBT Home Hub 5: 5g WiFi jumps to channel 36 and stops wo...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on BT Home Hub 5
- Software versions of LEDE release, packages, r3425-f28eef4 and previous versions
- Steps to reproduce

It can be after a few hours, if WiFi 5g radio0 Qualcomm Atheros QCA9880 802.11nac (radio0) is configured to a Band B channel, it jumps to Channel 36 even though there is no apparent interference.
This appears to happen more frequently overnight during long periods of inactivity. Whilst the device is being used it does not happen.

After it does make the jump, if I stop and restart the device (using luci disable/enable) the device stops, but it fails to restart. Attempts to change the channel and re-enable the device also do not help.

It requires a reboot to restore service.

 


14.02.2017514Base systemBug ReportVery LowLowAny files copied to flash gone after reboot17.01.0-rc2 ...TrunkUnconfirmed Task Description

PCEngines Alix with lede-17.01.0-rc2-r3131-42f3c1f-x86-geode-combined-squashfs.img

Boots fine.

Any software installed or files copied to flash disappear after reboot.

However LAN ethernet IP address is (usually)remembered but did get reset on one occasion.
But WiFi config of a USB dongle is always lost.

The board has a Lexar 16GB UDMA7 CF card. This config works fine with OpenWrt CC.

Reflashing, changing the flash card etc makes no difference.

16.02.2017521Base systemBug ReportVery LowLowkernel warning in mac802 11 / ibss_leave / r3472TrunkUnconfirmed Task Description

it is a “TP-LINK TL-WR1043ND”.

[46258.340310] ------------[ cut here ]------------
[46258.345255] WARNING: CPU: 0 PID: 10086 at compat-wireless-2017-01-31/net/mac80211/ibss.c:1082 ieee80211_get_vht_mask_from_cap+0x1a50/0x1b90 [mac80211]()
[46258.359026] Modules linked in: ath9k ath9k_common ath9k_hw ath nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack macvlan iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables compat em_nbyte sch_dsmark sch_pie sch_codel sch_gred em_cmp cls_basic act_ipt sch_red sch_prio em_meta act_police em_text sch_sfq sch_fq act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress ledtrig_usbport ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 zram lz4_decompress lz4_compress lzo_compress lzo_decompress zsmalloc usb_storage ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc16 crc32c_generic crypto_hash [last unloaded: crc_ccitt]
[46258.487331] CPU: 0 PID: 10086 Comm: kworker/u2:0 Not tainted 4.4.47 #0
[46258.494018] Workqueue: phy0 ieee80211_ibss_leave [mac80211]
[46258.499637] Stack : 80e34b40 80e34b40 00000001 800a7590 818ee5bc 80410d63 803aa280 00002766
[46258.499637]    803d4ab4 809dfab4 80410000 800a550c 00000001 800a7590 803af978 80410000
[46258.499637]    00000003 809dfab4 80410000 80095528 00000001 809dfaec 00000000 801f3b30
[46258.499637]    00000001 801f3b00 80f13acc 80e12300 80e12200 70687930 00000000 00000000
[46258.499637]    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[46258.499637]    ...
[46258.535670] Call Trace:
[46258.538143] [<80071e10>] show_stack+0x50/0x84
[46258.542555] [<80081b9c>] warn_slowpath_common+0xa0/0xd0
[46258.547819] [<80081c54>] warn_slowpath_null+0x18/0x24
[46258.553014] [<80f1268c>] ieee80211_get_vht_mask_from_cap+0x1a50/0x1b90 [mac80211]
[46258.560637]
[46258.562148] ---[ end trace eb9418c3bbf97ef5 ]---


uci config is:

wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.country='US'
wireless.radio0.channel='11'
wireless.radio0.frag='off'
wireless.radio0.noscan='1'
wireless.radio0.path='platform/ath9k'
wireless.radio0.hwmode='11ng'
wireless.radio0.ht_capab='SHORT-GI-40' 'DSSS_CCK-40'
wireless.radio0.htmode='HT20'
wireless.radio0.beacon_int='250'
wireless.@wifi-iface[0]=wifi-iface
wireless.@wifi-iface[0].device='radio0'
wireless.@wifi-iface[0].network='wlan'
wireless.@wifi-iface[0].mode='adhoc'
wireless.@wifi-iface[0].bssid='02:ca:ff:ee:00:11'
wireless.@wifi-iface[0].ssid='bb'
wireless.@wifi-iface[0].mcast_rate='6000'
wireless.@wifi-iface[0].macaddr='64:70:02:5c:1b:3c'
16.02.2017522Base systemBug ReportVery LowLowsudden wifi-restarts when client connects / r3439 on TP...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of LEDE release, packages, etc.
- Steps to reproduce

 
Thu Feb 16 13:31:57 2017 daemon.info hostapd: wlan1-1: STA 00:1e:65:94:22:52 IEEE 802.11: authenticated
Thu Feb 16 13:31:57 2017 daemon.info hostapd: wlan1-1: STA 00:1e:65:94:22:52 IEEE 802.11: associated (aid 2)
Thu Feb 16 13:31:57 2017 daemon.notice hostapd: wlan1-1: AP-STA-CONNECTED 00:1e:65:94:22:52
Thu Feb 16 13:31:58 2017 authpriv.info dropbear[4509]: Child connection from fe80::21e:65ff:fe94:2252%br-mastergate:32784
Thu Feb 16 13:32:01 2017 authpriv.notice dropbear[4509]: Password auth succeeded for 'root' from fe80::21e:65ff:fe94:2252%br-mastergate:32784
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.773904] ath: EEPROM regdomain: 0x8348
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.773917] ath: EEPROM indicates we should expect a country code
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.773924] ath: doing EEPROM country->regdmn map search
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.773930] ath: country maps to regdmn code: 0x3a
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.773936] ath: Country alpha2 being used: US
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.773942] ath: Regpair used: 0x3a
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.773948] ath: regdomain 0x8348 dynamically updated by user
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.774020] ath: EEPROM regdomain: 0x8348
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.774025] ath: EEPROM indicates we should expect a country code
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.774031] ath: doing EEPROM country->regdmn map search
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.774038] ath: country maps to regdmn code: 0x3a
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.774043] ath: Country alpha2 being used: US
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.774048] ath: Regpair used: 0x3a
Thu Feb 16 13:32:03 2017 kern.debug kernel: [ 8201.774054] ath: regdomain 0x8348 dynamically updated by user
Thu Feb 16 13:32:04 2017 kern.debug kernel: [ 8202.852253] ath: EEPROM regdomain: 0x8348
Thu Feb 16 13:32:04 2017 kern.debug kernel: [ 8202.852266] ath: EEPROM indicates we should expect a country code
Thu Feb 16 13:32:04 2017 kern.debug kernel: [ 8202.852273] ath: doing EEPROM country->regdmn map search
Thu Feb 16 13:32:04 2017 kern.debug kernel: [ 8202.852279] ath: country maps to regdmn code: 0x3a
Thu Feb 16 13:32:04 2017 kern.debug kernel: [ 8202.852286] ath: Country alpha2 being used: US
Thu Feb 16 13:32:04 2017 kern.debug kernel: [ 8202.852291] ath: Regpair used: 0x3a
Thu Feb 16 13:32:04 2017 kern.debug kernel: [ 8202.852298] ath: regdomain 0x8348 dynamically updated by user
Thu Feb 16 13:32:04 2017 kern.debug kernel: [ 8202.852368] ath: EEPROM regdomain: 0x8348
Thu Feb 16 13:32:04 2017 kern.debug kernel: [ 8202.852373] ath: EEPROM indicates we should expect a country code
Thu Feb 16 13:32:04 2017 kern.debug kernel: [ 8202.852380] ath: doing EEPROM country->regdmn map search
Thu Feb 16 13:32:04 2017 kern.debug kernel: [ 8202.852386] ath: country maps to regdmn code: 0x3a
Thu Feb 16 13:32:04 2017 kern.debug kernel: [ 8202.852391] ath: Country alpha2 being used: US
[...]
Thu Feb 16 13:32:12 2017 kern.debug kernel: [ 8210.413158] ath: doing EEPROM country->regdmn map search
Thu Feb 16 13:32:12 2017 kern.debug kernel: [ 8210.413165] ath: country maps to regdmn code: 0x3a
Thu Feb 16 13:32:12 2017 kern.debug kernel: [ 8210.413171] ath: Country alpha2 being used: US
Thu Feb 16 13:32:12 2017 kern.debug kernel: [ 8210.413176] ath: Regpair used: 0x3a
Thu Feb 16 13:32:12 2017 kern.debug kernel: [ 8210.413183] ath: regdomain 0x8348 dynamically updated by user
Thu Feb 16 13:32:12 2017 kern.debug kernel: [ 8210.413254] ath: EEPROM regdomain: 0x8348
Thu Feb 16 13:32:12 2017 kern.debug kernel: [ 8210.413259] ath: EEPROM indicates we should expect a country code
Thu Feb 16 13:32:12 2017 kern.debug kernel: [ 8210.413265] ath: doing EEPROM country->regdmn map search
Thu Feb 16 13:32:12 2017 kern.debug kernel: [ 8210.413272] ath: country maps to regdmn code: 0x3a
Thu Feb 16 13:32:12 2017 kern.debug kernel: [ 8210.413277] ath: Country alpha2 being used: US
Thu Feb 16 13:32:12 2017 kern.debug kernel: [ 8210.413282] ath: Regpair used: 0x3a
Thu Feb 16 13:32:12 2017 kern.debug kernel: [ 8210.413288] ath: regdomain 0x8348 dynamically updated by user
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491093] ath: EEPROM regdomain: 0x8348
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491106] ath: EEPROM indicates we should expect a country code
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491113] ath: doing EEPROM country->regdmn map search
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491120] ath: country maps to regdmn code: 0x3a
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491126] ath: Country alpha2 being used: US
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491131] ath: Regpair used: 0x3a
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491138] ath: regdomain 0x8348 dynamically updated by user
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491210] ath: EEPROM regdomain: 0x8348
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491215] ath: EEPROM indicates we should expect a country code
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491221] ath: doing EEPROM country->regdmn map search
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491227] ath: country maps to regdmn code: 0x3a
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491232] ath: Country alpha2 being used: US
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491237] ath: Regpair used: 0x3a
Thu Feb 16 13:32:13 2017 kern.debug kernel: [ 8211.491243] ath: regdomain 0x8348 dynamically updated by user
Thu Feb 16 13:32:16 2017 daemon.notice hostapd: wlan0-1: interface state ENABLED->DISABLED
Thu Feb 16 13:32:16 2017 daemon.notice hostapd: wlan0-1: AP-DISABLED 
Thu Feb 16 13:32:16 2017 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING 
Thu Feb 16 13:32:16 2017 daemon.notice hostapd: nl80211: deinit ifname=wlan0-1 disabled_11b_rates=0
Thu Feb 16 13:32:16 2017 daemon.notice netifd: Network device 'wlan0-1' link is down
Thu Feb 16 13:32:16 2017 daemon.notice netifd: Network alias 'wlan0-1' link is down
Thu Feb 16 13:32:16 2017 daemon.notice netifd: Interface 'wlan' has link connectivity loss
Thu Feb 16 13:32:16 2017 daemon.notice hostapd: wlan1-1: interface state ENABLED->DISABLED
Thu Feb 16 13:32:16 2017 daemon.notice hostapd: wlan1-1: AP-STA-DISCONNECTED 00:1e:65:94:22:52
Thu Feb 16 13:32:16 2017 daemon.notice hostapd: wlan1-1: AP-STA-DISCONNECTED c0:c9:76:09:0c:e0
Thu Feb 16 13:32:16 2017 daemon.notice hostapd: wlan1-1: AP-DISABLED 
Thu Feb 16 13:32:16 2017 daemon.notice hostapd: wlan1-1: CTRL-EVENT-TERMINATING 
Thu Feb 16 13:32:16 2017 daemon.notice hostapd: nl80211: deinit ifname=wlan1-1 disabled_11b_rates=0
Thu Feb 16 13:32:16 2017 daemon.notice netifd: Network device 'wlan1-1' link is down
Thu Feb 16 13:32:16 2017 daemon.notice netifd: Network alias 'wlan1-1' link is down
Thu Feb 16 13:32:16 2017 daemon.notice netifd: Interface 'wlanRADIO1' has link connectivity loss
Thu Feb 16 13:32:16 2017 daemon.info olsrd[5562]: Removing interface wlan1
Thu Feb 16 13:32:16 2017 daemon.err olsrd[5562]: OLSR: sendto IPv4 'Network unreachable' on interface wlan1
Thu Feb 16 13:32:16 2017 daemon.notice netifd: Network device 'wlan1' link is down
Thu Feb 16 13:32:16 2017 daemon.notice netifd: Interface 'wlanadhocRADIO1' has link connectivity loss
[...]

maybe this is a side-effect of may changed regdb, but it was till now never an issue:

root@F36-stube:~ :) iw reg get
global
country US: DFS-UNSET
	(2400 - 2494 @ 40), (N/A, 30), (N/A)
	(4910 - 5895 @ 40), (N/A, 30), (N/A)

phy#1
country US: DFS-UNSET
	(2400 - 2494 @ 40), (N/A, 30), (N/A)
	(4910 - 5895 @ 40), (N/A, 30), (N/A)

phy#0
country US: DFS-UNSET
	(2400 - 2494 @ 40), (N/A, 30), (N/A)
	(4910 - 5895 @ 40), (N/A, 30), (N/A)


27.02.2017563Base systemBug ReportVery LowLowcake qdisc high cpu usage on tp-link 841nTrunkUnconfirmed Task Description

So, I had this crazy idea to just make cake the default qdisk after seeing the battlemesh presentation. Now we are seeing high spikes in CPU usage after some time - the peaks appear to be of periodic nature. I only have some nmeter plots (basically vmstat/sar with dots - it’s a busybox applet) - the high load immediatly vanishes after switching the qdiscs back to fq_codel.

I’ve seen this on 2 841n routers one only using ap+ibss mode the other having wan+lan+ap+ibss+tap interfaces with cake running. Both also run a bridge for the AP.

Is the high system cpu usage expacted behavoir? cake qdisc is just using defaults:

This script does the activation:

# cat /etc/hotplug.d/iface/00-cake-qdisc 
#!/bin/sh

case "$ACTION" in
                ifup)
                grep -q '^sch_cake' '/proc/modules' && {
                        command -V tc > /dev/null || return 
                        tc qdisc replace dev "$DEVICE" root cake
                }
        ;;
esac
# vim: set filetype=sh ai noet ts=4 sw=4 sts=4 :

The results (1 line = 1 second):

root@weimarnetz-188:~ :) nmeter '%40c wlan: %[nbr-vap] ibss: %[nwlan0]'

cake 

SSSSSSSSUii............................. wlan:  8856  756 ibss:  4026 9162
SSSSSSSSSSSSSSSSSSSSU................... wlan:   44k 1736 ibss:  8726  49k
SSSSSSSi................................ wlan:   58k 2130 ibss:  5974  62k
SSSUUUUi................................ wlan:   58k 1296 ibss:   15k  68k
SSSSSSSSi............................... wlan:   49k 2532 ibss:  5298  53k
SSSSSSSSSSiii........................... wlan:   45k 2082 ibss:  8282  49k
SSSSSSSSSSSSSSSSSSSSSSU................. wlan:   39k 1794 ibss:   14k  45k
SSSSSSSSSSSSSSUi........................ wlan:   34k 2112 ibss:   11k  29k
SSSSSSSSSSSSSSSSSSSSSUUi................ wlan:   47k 2172 ibss:  7614  60k
U....................................... wlan:   58k 2934 ibss:  7496  61k
SSUi.................................... wlan:   53k 1944 ibss:  9.8k  58k
SSSSSSSSSSSSSSSSSSU..................... wlan:   47k 1698 ibss:  6552  51k
SSSSSSSSSSSSSUi......................... wlan:   57k 2704 ibss:  9.9k  62k
UUUiii.................................. wlan:   57k 1512 ibss:  8956  63k
SSSSSSSSSSSSSSSSSSSSSSSSii.............. wlan:   77k 4010 ibss:   17k  85k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSUii wlan:  6400  318 ibss:   450 6784
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSi wlan:   47k 1296 ibss:   12k  55k
SUUii................................... wlan:   49k 2542 ibss:  5604  53k
SSSSSSSSUUi............................. wlan:   56k 2354 ibss:   10k  62k
SSSSSSSSSSSSSSSSSSSSSi.................. wlan:   58k 1926 ibss:   11k  64k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSi wlan:   59k 2464 ibss:   22k  67k
SSSSSSSSSSSSSSUi........................ wlan:   41k  972 ibss:   10k  50k
SUi..................................... wlan:   44k 2132 ibss:  6310  47k
SUUi.................................... wlan:   52k 1642 ibss:   11k  58k
SSSSSSSSSSSSSSSSSSSSSSUi................ wlan:   54k 3826 ibss:   11k  60k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSUi wlan:   44k 1482 ibss:  6580  48k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSi.......... wlan:   32k 2396 ibss:  9732  38k
SSSSSSSSSSSSSSSSUUi..................... wlan:   18k 1164 ibss:  6888  20k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSUi... wlan:   37k  864 ibss:   13k  46k
SSSSSSSSSSSi............................ wlan:   57k 2112 ibss:  4166  60k
SSi..................................... wlan:   56k 1746 ibss:   11k  62k
SSSSSSSSSSSSSSSSSSSSi................... wlan:   43k  28k ibss:   39k  48k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSUU....... wlan:   15k  18k ibss:   25k  21k
SSSSSSSSSSSSSSSSUiiii................... wlan:   42k 255k ibss:  261k  52k
SUiiii.................................. wlan:   39k 393k ibss:  398k  54k
SSSSSSSSSSSSSSSSSSSSSSSSiii............. wlan:   26k 244k ibss:  251k  33k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSii........ wlan:   44k  86k ibss:   93k  54k
SSSSSSSSSSSSSSSSSSSSSSSSSSSUUii......... wlan:   27k  33k ibss:   41k  33k
SSSSSUiii............................... wlan:   54k  36k ibss:   40k  60k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSii wlan:   30k  46k ibss:   52k  35k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSi wlan:   23k  13k ibss:   20k  26k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSUii.... wlan:   53k  31k ibss:   40k  66k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSU......... wlan:   31k  18k ibss:   29k  35k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSi wlan:   13k 1262 ibss:  8370  16k
SSSSSSSSSSSSUi.......................... wlan:   46k  35k ibss:   54k  63k
SU...................................... wlan:   53k  87k ibss:   93k  59k
SSSSSSSSSSUUi........................... wlan:   43k  23k ibss:   32k  50k
SSSUUUiii............................... wlan:   46k 164k ibss:  172k  54k
SSSSSSSSSUiii........................... wlan:   48k 245k ibss:  250k  59k
SSSSSSSSSSSSSSS......................... wlan:   38k 5959 ibss:   10k  44k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSi wlan:   38k 1838 ibss:  9944  41k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSi wlan:   25k 1344 ibss:  2774  25k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS wlan:   43k 2442 ibss:   10k  44k
SSSSSSSSSSSSSSSSSSSSUUii................ wlan:   59k 1968 ibss:   11k  73k
Si...................................... wlan:   60k 2354 ibss:   10k  67k
SU...................................... wlan:   57k 1680 ibss:   11k  63k
Siii.................................... wlan:   51k 3560 ibss:  8042  54k
SSSSSSSSSSSi............................ wlan:   50k 1080 ibss:   14k  58k
SSSSSSSSSSSSSUU......................... wlan:   53k 2548 ibss:   13k  59k
SSSSSSSSSSSSi........................... wlan:   46k 2309 ibss:  9093  52k
SSSSSSSSSSSSSSSSSSSSi................... wlan:   83k 3816 ibss:   14k  91k
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSi........ wlan:   25k 3210 ibss:  5668  26k
SSSSSSSSSSSSSSSSSSSSSSSUii.............. wlan:   53k 2478 ibss:   11k  59k
SSSSSSSSSSSSSSSSSSSSSSSSSUi............. wlan:   15k 1308 ibss:  8142  20k
SSUUii.................................. wlan:   799  607 ibss:   11k 5339
SUi..................................... wlan:  1449 1436 ibss:   11k 9399
SSSSSSSSSSSSSSSSSSSSSSSSSSSSU........... wlan:   240 2738 ibss:   10k 3224
SSSSSSSSSU.............................. wlan:   132   66 ibss:   10k 4804
UUi..................................... wlan:   320  347 ibss:   11k 6020


-----> fq_codel 

S....................................... wlan:     0    0 ibss:  8664 3682
SSSSSSSSSU.............................. wlan:     0    0 ibss:  9022 6566
SS...................................... wlan:   703 6076 ibss:   14k 3565
S....................................... wlan:  2971 1862 ibss:  8554 7219
SUi..................................... wlan:     0    0 ibss:  7810 3732
SSUUi................................... wlan:     0    0 ibss:  8440 2920
SSii.................................... wlan:  1449 1436 ibss:   10k 7771
Ui...................................... wlan:     0    0 ibss:  8068 3258
Ui...................................... wlan:     0    0 ibss:  7910 3614
SSUi.................................... wlan:   252  185 ibss:   12k 5022
SUi..................................... wlan:  4742 1368 ibss:  9.8k  10k
SU...................................... wlan:     0    0 ibss:   11k 4646
Ui...................................... wlan:     0    0 ibss:   15k 5802
SS...................................... wlan:     0    0 ibss:  6918 3742
SU...................................... wlan:   122 2576 ibss:  4978  404
SSUii................................... wlan:     0    0 ibss:  8856 5890
SU...................................... wlan:  1449 1436 ibss:  6598 4791
SU...................................... wlan:    41   54 ibss:  4234 2101
UUii.................................... wlan:     0    0 ibss:   12k 5438
SUi..................................... wlan:   280  239 ibss:  7599 1644
U....................................... wlan:     0    0 ibss:  5962 3606
U....................................... wlan:     0    0 ibss:   10k 5502
SU...................................... wlan:     0    0 ibss:   14k 7486
Ui...................................... wlan:     0    0 ibss:   14k 5030
SU...................................... wlan:     0    0 ibss:  7930 4702
Ui...................................... wlan:   799  606 ibss:   10k 5400
SSSSSSSSSSSSSU.......................... wlan:  1449 1436 ibss:  9936 5653
S....................................... wlan:     0    0 ibss:  5818 2964
SU...................................... wlan:     0    0 ibss:   11k 7547
SU...................................... wlan:   252  185 ibss:  6264 3875
Ui...................................... wlan:  4159  995 ibss:  8313 8409
U....................................... wlan:     0    0 ibss:  3912 1240
SU...................................... wlan:     0    0 ibss:  4600 3784
S....................................... wlan:   122 2604 ibss:  9706 3374
SUUUi................................... wlan:     0    0 ibss:   13k 6328
U....................................... wlan:     0    0 ibss:   10k 6940
ii...................................... wlan:  1504 1589 ibss:  8605 4736
SUUi.................................... wlan:   108    0 ibss:   13k 8516
SUi..................................... wlan:  5241  28k ibss:   32k 9431
SSUUi................................... wlan:  9.7k  24k ibss:   33k  14k
SUi..................................... wlan:   743  456 ibss:   14k 7591
U....................................... wlan:     0    0 ibss:  2212 2732
SSSSSSSSSSU............................. wlan:     0    0 ibss:  9750 6434
........................................ wlan:  4585  492 ibss:  4616 6971
SUi..................................... wlan:   326 1155 ibss:   11k 4874
Si...................................... wlan:     0    0 ibss:  2330  214
Si...................................... wlan:  4336 3047 ibss:   18k  11k
SUi..................................... wlan:   100    0 ibss:  9838 5264
S....................................... wlan:     0    0 ibss:   14k 6298
SSSU.................................... wlan:   644  511 ibss:  6719 4294
SUii.................................... wlan:     0    0 ibss:   13k 6274
S....................................... wlan:     0    0 ibss:  6822 1738
U....................................... wlan:     0    0 ibss:  4790 1730
Ui...................................... wlan:   124  110 ibss:  5518 3544
SU...................................... wlan:   229   42 ibss:  8218 4972
Si...................................... wlan:  1000  607 ibss:  4750 2432
........................................ wlan:  1650 1436 ibss:  8372 5635
UUi..................................... wlan:   201    0 ibss:  9418 5422
Ui...................................... wlan:     0    0 ibss:   14k 7438
SSUi.................................... wlan:  3268 1862 ibss:   14k 9690
SUU..................................... wlan:     0  108 ibss:  9030 4918
SSi..................................... wlan:    80  108 ibss:  9442 5162
Ui...................................... wlan:    41   54 ibss:  9768 4757
Sii..................................... wlan:    58  104 ibss:  5570 3562
UU...................................... wlan:     0    0 ibss:  7098 4134
SU...................................... wlan:     0    0 ibss:  8142 2818
S....................................... wlan:  2941 2271 ibss:  7081 6303
SUi..................................... wlan:   315    0 ibss:  8524 3738
Ui...................................... wlan:  1309  757 ibss:   10k 7143
SUU..................................... wlan:  1450  428 ibss:  7150 5470
SUi..................................... wlan:  3187 8952 ibss:   16k 7107
U....................................... wlan:  4559 2197 ibss:  7959 8811
Ui...................................... wlan:  5564 2171 ibss:  8323 9118
i....................................... wlan:   11k  41k ibss:   50k  18k
root@weimarnetz-188:~ 8( cat /tmp/sysinfo/model 
TP-Link TL-WR841N/ND v11
root@weimarnetz-188:~ :) cat /etc/os-release 
NAME="weimarnetz"
VERSION="SNAPSHOT, Reboot"
ID="weimarnetz"
ID_LIKE="lede openwrt"
PRETTY_NAME="weimarnetz Reboot SNAPSHOT"
VERSION_ID="snapshot"
HOME_URL="http://lede-project.org/"
BUG_URL="http://bugs.lede-project.org/"
SUPPORT_URL="http://forum.lede-project.org/"
BUILD_ID="v0.10.0-dirty+lede-r3598-eb09d79c16"
LEDE_BOARD="ar71xx/generic"
LEDE_ARCH="mips_24kc"
LEDE_TAINTS="no-all busybox"
LEDE_DEVICE_MANUFACTURER="LEDE"
LEDE_DEVICE_MANUFACTURER_URL="http://lede-project.org/"
LEDE_DEVICE_PRODUCT="weimarnetz"
LEDE_DEVICE_REVISION="v0"
LEDE_RELEASE="weimarnetz Reboot SNAPSHOT v0.10.0-dirty+lede-r3598-eb09d79c16"

(this is basically stock release just with a versioning patch and the symbols added:

CONFIG_KERNEL_KALLSYMS=y
CONFIG_BUSYBOX_CUSTOM=y
CONFIG_BUSYBOX_CONFIG_MKSWAP=n
CONFIG_BUSYBOX_CONFIG_SWAPONOFF=n
CONFIG_BUSYBOX_CONFIG_MKPASSWD=y
CONFIG_BUSYBOX_CONFIG_ARPING=y
CONFIG_BUSYBOX_CONFIG_NMETER=y
CONFIG_PACKAGE_MAC80211_MESH=n
CONFIG_TARGET_SQUASHFS_BLOCK_SIZE=256
CONFIG_STRIP_KERNEL_EXPORTS=y
Showing tasks 51 - 100 of 1115 Page 2 of 23 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing