OpenWrt/LEDE Project

Welcome to the OpenWrt/LEDE Project bug reporting and issue tracking system

Problems to be reported here are for the OpenWrt/LEDE Project targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt/LEDE Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to lede-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeveritySummaryReported InStatus  desc
22.06.201626FlysprayFeature RequestVery LowLowComment formatting syntax should be documentedTrunkResearching Task Description

Currently the formatting options are not documented anywhere, and I failed to find any documentation with google. There are a few buttons to use, but they seem to be rather limited (e.g. nothing for quotations).

17.04.2017713Base systemBug ReportVery LowLownetifd: substantially more IFUP events are being create...TrunkResearching Task Description

I have noticed that some services reloaded with a procd “interface.*” raw trigger are reloading on a much more frequent cadence (few minutes or so). LEDE 17.01 does not do this. LEDE Trunk does. I can not find an obvious cause in procd. Though procd should not stop-start for reload without a command line change or explicit file under watch. Perhaps netifd commit a03216660797173fbe67866f75564e3fec9c1e8d is generating unusual numbers of IFUP.

procd_add_raw_trigger “interface.*” 2000 /etc/init.d/[script] reload

29.09.20171024PackagesFeature RequestVery LowLowThere is no "LEDE interface" for the Linux interface cr...AllResearching Task Description

Let’s say I want to enable dropbear only in the tun0 interface created by OpenVPN. The dropbear configuration has an “Interface” field where I can make it listen, for example, only on the “wan” or “lan” interfaces. But the tun0 interface has not been created by anything in /etc/config/network and LEDE doesn’t really know about it, so I can’t specify it the dropbear configuration.

Even adding the tun0 interface to a “vpn” network in /etc/config/network using “proto none” fails to do the trick.

13.12.20192673Base systemBug ReportVery LowLowrsn_preauth_interface should be configurableTrunkResearching Task Description

OpenWrt currently automatically uses the client-facing interface ($network_bridge) as rsn_preauth_interface.

https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=package/network/services/hostapd/files/hostapd.sh;h=4bf6a6c9712785f40d059445f80f19d4f2992f4b;hb=HEAD#l554

It would be preferable to be able to configure this manually, since this is the interface where 802.11i preauthentication frames are transmitted over. This should not be mixed with the actual client network.

The hostapd configuration says the following:

# Space separated list of interfaces from which pre-authentication frames are
# accepted (e.g., 'eth0' or 'eth0 wlan0wds0'. This list should include all
# interface that are used for connections to other APs. This could include
# wired interfaces and WDS links. The normal wireless data interface towards
# associated stations (e.g., wlan0) should not be added, since
# pre-authentication is only used with APs other than the currently associated
# one.
#rsn_preauth_interfaces=eth0
24.07.2017927Base systemBug ReportVery LowCriticalSQUASHFS error: xz decompression failedlede-17.01Assigned Task Description

Ubiquiti AirGateway and Bullet M2
LEDE 17.01.2
Lighttpd
PHP7

Runs very well on boot up. Then after some interval ranging from minutes to days, the following typical error occurs, repeated numerous times with differing blocks:
Mon Jul 24 07:09:39 2017 kern.err kernel: [43650.730023] SQUASHFS error: xz decompression failed, data probably corrupt
Mon Jul 24 07:09:39 2017 kern.err kernel: [43650.735459] SQUASHFS error: squashfs_read_data failed to read block 0x1e5d9a

Following this the unit becomes unresponsive, very slow or reboots its self.
Tried on two different devices and get the same result.

Images produced with Imagebuilder with ipv6, usb, ppp, luci removed to give space on flash.

The exact same config on OpenWrt CC (but with php5) gives no problems.

root@BlueWave:~# free

           total       used       free     shared    buffers     cached

Mem: 28176 19956 8220 132 1460 4296
-/+ buffers/cache: 14200 13976
Swap: 0 0 0

root@BlueWave:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 4.8M 4.8M 0 100% /rom
tmpfs 13.8M 132.0K 13.6M 1% /tmp
/dev/mtdblock5 1.4M 508.0K 964.0K 35% /overlay
overlayfs:/overlay 1.4M 508.0K 964.0K 35% /
tmpfs 512.0K 0 512.0K 0% /dev


26.03.20202935Base systemBuild FailureVery LowCriticalx86/geode: cycling reboot with openwrt-x86-geode-gener...TrunkAssigned Task Description

Device problem occurs on booting

[    2.744573] F2FS-fs (sda2): Magic Mismatch, valid(0xf2f52010) - read(0x803646e3)
[    2.752130] F2FS-fs (sda2): Can't find valid F2FS filesystem in 1th superblock
[    2.762100] F2FS-fs (sda2): Magic Mismatch, valid(0xf2f52010) - read(0xd083295c)
[    2.769648] F2FS-fs (sda2): Can't find valid F2FS filesystem in 2th superblock
[    2.777149] List of all partitions:
[    2.780684] 0800           64000 sda
[    2.780689]  driver: sd
[    2.786951]   0801            8192 sda1 d50cf6e8-01
[    2.786955]
[    2.793377]   0802           55296 sda2 d50cf6e8-02
[    2.793380]
[    2.799893] No filesystem could mount root, tried:
[    2.799896]  ext3
[    2.804794]  ext2
[    2.806834]  ext4
[    2.808783]  squashfs
[    2.810733]  f2fs
[    2.813031]
[    2.816579] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-                                                                                                                  block(8,2)
[    2.824874] Kernel Offset: disabled
[    2.828394] Rebooting in 1 seconds..

Software versions of OpenWrt/LEDE release, packages, etc.
nightbuild image @2020-03-26 r12712-556b858

Steps to reproduce
After syncronizing source code with master branch we get fail with x86-*squashfs-combined images.
Size of openwrt-x86-geode-generic-squashfs-combined.img and openwrt-x86-geode-geos-squashfs-combined.img images isn’t
correct (less than expected).
Device never boot with them.

19.02.2017534Base systemBug ReportVery LowHighUSB xHCI deadlock on bootlede-17.01Assigned Task Description

Supply the following if possible:
- Device problem occurs on
VirtualBox x86_64 Version 5.0.32 r112930
- Software versions of LEDE release, packages, etc.
17.01.00rc2
- Steps to reproduce
Create the disk image
Switch from EHCI (the default in a new VM) to xHCI.
Boot the machine
The machine will deadlock soon after initializing the USB ports


25.07.2017931Base systemBug ReportVery LowHighOnboard Bluetooth not working on Raspberry Pi 3 BAllAssigned Task Description

I have tried LEDE 17.01.1 and 17.01.2 and i can’t get bluetooth running on raspberry pi 3.

It will not flash the firmware for the bluetooth controller on rpi3, when device is brought up:

root@LEDE:~# /usr/bin/hciattach /dev/ttyAMA0 bcm43xx 921600 noflow -
bcm43xx_init
Patch not found for BCM43430A1, continue anyway
Set Controller UART speed to 921600 bit/s
Device setup complete

Instead of patch not found it should produce:
Flash firmware /lib/firmware/brcm/BCM43430A1.hcd

I could not find this firmware via opkg, so i used a file from OpenELEC at
https://github.com/OpenELEC/misc-firmware/tree/master/firmware/brcm

This however won’t load and bluetooth is not initialized correctly and unusable:

root@LEDE:~# /usr/bin/hciattach /dev/ttyAMA0 bcm43xx 921600 noflow -
bcm43xx_init
Flash firmware /lib/firmware/brcm/BCM43430A1.hcd
Initialization timed out

 


17.07.20181664Base systemBug ReportVery LowHighUnable to use wan port (dhcp or static ip is not workin...AllAssigned Task Description

Device: Belkin F9K1115 v2
Software version: OpenWrt 18.06.0-rc1, LEDE after r3466-f6907dc

Unable to use wan port on any new software version (last known working LEDE version is r3466-f6907dc).
DHCP is not getting ip address. After setting up static ip address there is no network communication.

30.03.20202949KernelBug ReportVery LowHighWireless not working on bananapi proopenwrt-19.07Assigned Task Description

openwrt install on bananapi pro has no functioning wifi.
No wireless interface, no wireless option in ui, etc...

Supply the following if possible:
- Device problem occurs on: lemaker bananapi pro
- Software versions of OpenWrt/LEDE release, packages, etc. : openwrt-19.07.2 and also 18.06.8
- Steps to reproduce

 flash openwrt to sd card
 boot
 check interfaces via the UI or SSH

I’ve attached syslog & dmesg

suspicious lines:
[ 9.150351] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1
[ 9.159364] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43362-sdio.bin failed with error -2
[ 9.169181] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.222013] firmware brcm!brcmfmac43362-sdio.bin: firmware_loading_store: map pages failed

Might be relevant:
https://github.com/armbian/build/commit/1c3fde7d3b8f97a7acbd41d5513d73990e3c77e9 https://forum.armbian.com/topic/9341-brcmfmac-not-working-after-upgrade-to-armbian-570/

12.02.2017503KernelBuild FailureVery LowMediumBuild fails with CONFIG_KERNEL_GIT_CLONE_URI beig setAllAssigned Task Description

When specifying

CONFIG_KERNEL_GIT_CLONE_URI

a clean build fails, as the system assumes a already downloaded/cloned/packed linux-source is present in dl/ which on a freshly checked out openwrt/lede source isn’t the case yet, when

toolchain/kernel-headers

is about to be built.

The build error looks like:

make[3]: Entering directory `/build/lede.git/toolchain/kernel-headers'
zcat /build/lede.git/dl/linux-4.4.42.tar.gz | tar -C /build/lede.git/build_dir/toolchain-arm_cortex-a9+neon_gcc-6.3.0_glibc-2.24_eabi -xf -
gzip: /build/lede.git/dl/linux-4.4.42.tar.gz: No such file or directory
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors

The issue apparently is located in

include/kernel-defaults.mk

, line 53ff::

  ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"")
    define Kernel/Prepare/Default
        zcat $(DL_DIR)/$(LINUX_SOURCE) | $(TAR) -C $(KERNEL_BUILD_DIR) $(TAR_OPTIONS)
        $(Kernel/Patch)
        $(if $(QUILT),touch $(LINUX_DIR)/.quilt_used)
    endef
  else
    define Kernel/Prepare/Default
        zcat $(DL_DIR)/$(LINUX_SOURCE) | $(TAR) -C $(KERNEL_BUILD_DIR) $(TAR_OPTIONS)
    endef
  endif

For the package

kernel-headers

it just tries to access the not-yet downloaded/cloned/packed linux kernel source archive.

08.04.2017692Base systemBug ReportMediumMediumWLAN AP not working on RasPi (bcm2710 target)TrunkAssigned Task Description

When flashing the brcm2708 / bcm2710 target the WiFi interface gets stuck in “client mode” and the AP will not be able to be brought up.

Some screenshots and a load of discussion here:
https://forum.lede-project.org/t/ap-mode-radio0-in-raspi-3-always-acts-as-a-client-shows-as-wlan0-in-luci/2885

Two more days of tinkering, wifi-up’ing and -down’ing did not bring me further.
I flashed another Pi3 (to exclude a hardware defect) with the same result.

I tried latest snapshot and stable images.
I am happy to help debug – tell me what you need me to do.

Greetings,
–Thomas

22.06.2017863KernelBug ReportMediumMediumath9k failure with AP+11s VIFs ("unsupported hw bitrate...lede-17.01Assigned Task Description

A Gluon user reported the following issue, observed on a TL-WR841N v9 (QCA953x). LEDE version is 17.01.2.

Gluon uses AP+11s VIFs, with multicast_rate set to 12000.

The WLAN became unusable (no connection possible, WLAN LED permantently on) after a few hours of operation. Both VIFs were affected. The system recovered on its own after an hour in this state. Unfortunately, I have no information if beacons were still running in the broken state.

After the recovery, the large number of messages like the following were found in the kernel log:

[40085.953696] ath: phy0: unsupported hw bitrate detected 0x73 using 1 Mbit
[40200.844082] ath: phy0: unsupported hw bitrate detected 0x48 using 1 Mbit
[40281.298039] ------------[ cut here ]------------
[40281.303081] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 ieee80211_rx_napi+0x130/0x8b0 [mac80211]()
[40281.315230] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 100 (0x64)
[40281.325023] Modules linked in: iptable_nat ath9k nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 ipt_REJECT ipt_MASQUERADE ebtable_nat ebtable_filter ebtable_broute ath9k_common xt_time xt_tcpudp xt_state xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_LOG xt_CT nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack mac80211 iptable_mangle iptable_filter ip_tables ebtables ebt_vlan ebt_stp ebt_snat ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_ip6 ebt_ip ebt_dnat ebt_arpreply ebt_arp ebt_among ebt_802_3 br_netfilter ath9k_hw ath em_nbyte em_cmp sch_pie em_meta sch_gred sch_teql act_ipt sch_prio em_text sch_codel sch_red sch_fq sch_sfq sch_dsmark act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_htb sch_hfsc batman_adv libcrc32c cfg80211 compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables dummy veth tun act_police cls_basic sch_tbf sch_ingress gpio_button_hotplug crc16 crc32c_generic crypto_hash
[40281.433128] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.71 #0
[40281.440330] Stack : 803e32a4 00000000 00000001 80440000 8042d1dc 8042ce63 803c48ac 00000000
[40281.440330]    804a378c 00000004 00000000 8180e918 00000000 800a7664 803c9fa8 80430000
[40281.440330]    00000003 00000004 803c83b4 81809d5c 00000000 800a55e0 00000002 00000000
[40281.440330]    8042bf70 801f5300 00000000 00000000 00000000 00000000 00000000 00000000
[40281.440330]    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[40281.440330]    ...
[40281.477351] Call Trace:
[40281.479951] [<800a7664>] vprintk_default+0x24/0x30
[40281.484917] [<800a55e0>] printk+0x2c/0x38
[40281.489077] [<801f5300>] serial8250_get_mctrl+0x30/0x54
[40281.494512] [<80081c60>] warn_slowpath_common+0xa0/0xd0
[40281.499949] [<801a772c>] dump_stack+0x14/0x28
[40281.504473] [<80071ea8>] show_stack+0x50/0x84
[40281.509003] [<80081c60>] warn_slowpath_common+0xa0/0xd0
[40281.514543] [<80e25cf0>] ieee80211_rx_napi+0x130/0x8b0 [mac80211]
[40281.520918] [<80081cbc>] warn_slowpath_fmt+0x2c/0x38
[40281.526158] [<80e25cf0>] ieee80211_rx_napi+0x130/0x8b0 [mac80211]
[40281.532495] [<802623ec>] __build_skb+0x48/0xc8
[40281.537148] [<802625d0>] __netdev_alloc_skb+0xd0/0x148
[40281.542477] [<80060bf4>] handle_int+0x134/0x140
[40281.547181] [<80de8388>] ath9k_cmn_rx_skb_postprocess+0x50/0x168 [ath9k_common]
[40281.554852] [<80e88374>] ath_rx_tasklet+0xee8/0xf4c [ath9k]
[40281.560635] [<8006503c>] __bzero+0xa0/0x164
[40281.565012] [<80e88340>] ath_rx_tasklet+0xeb4/0xf4c [ath9k]
[40281.570828] [<80e851b8>] ath9k_tasklet+0x200/0x28c [ath9k]
[40281.576512] [<80084820>] tasklet_action+0x80/0xc8
[40281.581390] [<800841dc>] __do_softirq+0x250/0x298
[40281.586284] [<800a82bc>] generic_handle_irq+0x24/0x3c
[40281.591540] [<8006a9e0>] plat_irq_dispatch+0xd4/0x10c
[40281.596760] [<80060bf4>] handle_int+0x134/0x140
[40281.601447]
[40281.602992] ---[ end trace f41ea26ed5101c02 ]---

Both the numbers in the “unsupported hw bitrate detected” messages and the status→rate_idx values in the WARNINGs are seemingly random.

25.10.20192567KernelBug ReportVery LowMedium[ATH79] USB speed degradation on WDR4300openwrt-19.07Assigned Task Description

Hello!

I experience huge speed loss on the lastest build (Thu Oct 24 21:58:18 2019) using the ath79 snapshot image builder. I had the same problem on the ~2 weeks earlier build as well, just wanted to have a try on the up to date version now.
Built configuration on both 18.04.6 and 19.07:
PROFILE=tplink_tl-wdr4300-v1 PACKAGES=”block-mount diffutils f2fs-tools kmod-fs-f2fs kmod-mtd-rw kmod-usb-storage luci mailsend-nossl minidlna nfs-kernel-server ppp-mod-pppoe shadow-su transmission-daemon-mbedtls transmission-remote-mbedtls vsftpd usbreset zram-swap -ip6tables -kmod-ip6tables -kmod-ipv6 -kmod-nf-conntrack6 -kmod-nf-ipt6 -libopenssl1.1 -odhcp6c -odhcpd-ipv6only -luci-proto-ipv6 -libip6tc2”

Drive: Kingston DT G3 32GB (old one, better quality with Intel MLC flash)
Firewall: w and w/o flow offload on 19.07
Model: TP-Link WDR4300 v1

File read speeds:
18.06.4 orig vstpd 542M 75s 7,2MB/s
18.06.4 pepe2k vstpd 542M 64s 7,2MB/s
19.07 pepe2k vstpd 542M 543s 1,0MB/s
19.07 pepe2k dd+nc 256M 321s 0,8MB/s

- During the measurement, no root overlay was in use, just a general filesystem was attached
- lower speeds are really close to USB 1.x standard
- measurements took on fresh installations
- the degradation exists if only one drive is attached
- the degradation exists on both filesystem and block level.

I’m using pepe2k’s uboot image (CPU clocked to 600MHz). However I didn’t revert the uboot partition now, I did for a few weeks, nothing has changed.

Let me know if I can help the troubleshooting anyway. Dmesg logs are attached for all mentioned configurations (18.06.4 orig, 18.06.4 pepe2k, 19.07 pepe2k).

Best regards

13.10.2016224Base systemBug ReportVery LowLowwrong source IP when logging to remote IPv6 syslog serv...TrunkAssigned Task Description

Hello,

I’m trying to send log to remote IPv6 syslog server (x:y:z:12::1), but packets received by syslog server are invalid. Instead of public IPv6 address, syslog udp packets are sent with ::1 source IP and therefore ignored by destination server. Logging over IPv4 works ok.

tcpdump log from destination syslog server:
23:34:16.988433 IP6 ::1.38044 > x:y:z:12::1.514: SYSLOG daemon.notice, length: 65

Configuration:

/etc/config/system:

 option log_ip 'x:y:z:12::1'

Device is in the same range as syslog server (x:y:z:12::119/64) and has native IPv6 connectivity. Other services (dropbear, ntp client, snmpd, luci) are running fine over IPv6.

Device is TP-Link WDR3600, running lede reboot-1818-gb81fc29.

18.06.2017853Base systemBug ReportVery LowLowChange dnsmasq domain and local options to listsTrunkAssigned Task Description

On LEDE 17.01 ‘domain’ and ‘local’ options in dnsmasq configuration doesn’t correctly support lists values as per dnsmasq capabilities.

Steps to reproduce

#/etc/config/dhcp
[...]
config dnsmasq
        list domain 'example1.com,192.168.0.0/24'
        list domain 'example2.com,192.168.1.0/24'
        list local '/example1.com/'
        list local '/example2.com/'
[...]

$ uci commit dhcp
$ /etc/init.d/dnsmasq restart

Actual results

#/var/etc/dnsmasq.conf.cfg02411c
[...]
domain=example1.com,192.168.0.0/24 example2.com,192.168.1.0/24
local=/example1.com/ /example2.com/
[...]

Expected results

#/var/etc/dnsmasq.conf.cfg02411c
[...]
domain=example1.com,192.168.0.0/24
domain=example2.com,192.168.1.0/24
local=/example1.com/
local=/example2.com/
[...]

Workaround

Replace append_parm with config_list_foreach here resolve the issue.
I’m attaching a patch for the 17.01 dnsmasq init script but it will break old uci configuration that use ‘option’ instead of ‘list’.
Do you have any suggestion on how to migrate old configuration and set those parameters as lists in uci web interface?

25.11.20171190Base systemFeature RequestVery LowLowNETGEAR WNDR3800 USB LED trigger not work properly!TrunkAssigned Task Description

When I plug USB device in USB port, USB is working。I can copy data to usb device. The USB LED show green。But when the data is copying to usb device, the usb led do not blink, just is always green. I select usb trigger and select usbport hub1 and port1. It does not blink too. It means trigger dont work.

model: NETGEAR WNDR3800
Firmware Version LEDE Reboot SNAPSHOT r5420-332438b / LuCI Master (git-17.328.04231-802d5b6)
Kernel Version 4.9.63

By the way, my device work properly in 15.05.1 and 14.07. When I flash LEGE, it have been found this problem.

02.01.20181252Base systemBug ReportVery LowLowNo IP Assigned to Interface with QMI on Quectel EC-25ATrunkAssigned Task Description

I’m attempting to use QMI on a GL.Inet MiFi equipped with a Quectel EC-25A cellular modem.

When I configure the interface using qmi I am able to connect to the cellular network at the radio layer, however my wwan0 interface is not assigned an IP address. Here’s my configuration from /etc/config/network:

  config interface 'modem'
          option proto 'qmi'
          option ifname 'wwan0'
          option device '/dev/cdc-wdm0'
          option country 'country11'
          option apn 'inet.bell.ca'

And some commands showing the device behaviour. You’ll note that raw_ip needs to be set to Y. I’ve integrated this [patch](https://github.com/bmork/LEDE/commit/10aed12fa587e818e4dc5d0db54545623fbe9b5f) to have qmi.sh set the raw_ip mode when required.

  root@OpenWrt:~# cat /sys/class/net/wwan0/qmi/raw_ip
  Y
  root@OpenWrt:~# ifup modem
  root@OpenWrt:~# uqmi -d /dev/cdc-wdm0 --get-data-status
  "connected"
  root@OpenWrt:~# uqmi -d /dev/cdc-wdm0 --get-current-settings
  {
      "pdp-type": "ipv4",
      "ip-family": "ipv4",
      "mtu": 1500,
      "ipv4": {
          "ip": "100.105.180.51",
          "dns1": "206.47.201.246",
          "dns2": "207.231.231.254",
          "gateway": "100.105.180.52",
          "subnet": "255.255.255.248"
      },
      "ipv6": {
          
      },
      "domain-names": {
          
      }
  }
  root@OpenWrt:~# ifconfig wwan0
  wwan0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
            inet6 addr: fe80::d789:480e:bfc8:2dac/64 Scope:Link
            UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
            RX packets:28 errors:0 dropped:0 overruns:0 frame:0
            TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000 
            RX bytes:5129 (5.0 KiB)  TX bytes:768 (768.0 B)

If I manually use the uqmi command to connect to the cellular network I can then drive the wwan0 interface using dhcp successfully. Here’s my /etc/config/network.

  config interface 'modem'
          option proto 'dhcp'
          option ifname 'wwan0'

And the resulting successful network connection:

  root@OpenWrt:~# ifup modem
  root@OpenWrt:~# ifconfig wwan0
  wwan0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
            inet addr:100.105.180.51  P-t-P:100.105.180.51  Mask:255.255.255.248
            inet6 addr: fe80::d789:480e:bfc8:2dac/64 Scope:Link
            UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
            RX packets:80 errors:0 dropped:0 overruns:0 frame:0
            TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000 
            RX bytes:24102 (23.5 KiB)  TX bytes:16842 (16.4 KiB)
  root@OpenWrt:~# ping -c 1 google.ca
  PING google.ca (172.217.1.163): 56 data bytes
  64 bytes from 172.217.1.163: seq=0 ttl=51 time=29.792 ms
  1. – google.ca ping statistics —

1 packets transmitted, 1 packets received, 0% packet loss

  round-trip min/avg/max = 29.792/29.792/29.792 ms

I believe that for some reason the dhcp client isn’t being run on the wwan0 interface by qmi.sh once it’s online but I’m not able to determine how this is supposed to work. I’m eager to address this issue and submit the resulting patches. Please let me know if you can help.

  root@OpenWrt:~# ping -c 1 8.8.8.8
  PING 8.8.8.8 (8.8.8.8): 56 data bytes
  64 bytes from 8.8.8.8: seq=0 ttl=54 time=31.805 ms
  1. – 8.8.8.8 ping statistics —

1 packets transmitted, 1 packets received, 0% packet loss

  round-trip min/avg/max = 31.805/31.805/31.805 ms
09.07.20181645Base systemFeature RequestVery LowLowNAT reflection/loopback fails with multiple zoneslede-17.01Assigned Task Description

I have multiple internal VLANs, and multiple firewall zones (e.g. a guest network, a DMZ LAN) with separate IP ranges and locked-down routing in between. I’ve found that if I forward a port to a web server in my DMZ zone the ‘NAT Loopback’ option has no effect on hosts outside of that zone (e.g. in my LAN or GuestLAN zones).

LEDE:

# curl https://mywebsite.com curl: (7) Failed to connect to mywebsite.com port 443: Connection refused

On DMZ:

$ curl https://mywebsite.com <html>
<head>
<title>
...

The port forward works fine on hosts outside my network.

I’ve looked into adding custom rules to fix this, since a Linux sysadmin with a little bit of iptables experience, but I’m not having much luck figuring out the LEDE firewall.

Using LEDE Reboot (17.01.4, r3560-79f57e422d) on x86 (QOTOM J1900 embedded PC).

10.09.20181840Base systemBug ReportVery LowLowencryption wep+mixed brokenTrunkAssigned Task Description

In file lib/netifd/netifd-wireless.sh the following code is found:

  # Examples:
  # psk-mixed/tkip    => WPA1+2 PSK, TKIP
  # wpa-psk2/tkip+aes => WPA2 PSK, CCMP+TKIP
  # wpa2/tkip+aes     => WPA2 RADIUS, CCMP+TKIP

  case "$encryption" in
    wpa2*|*psk2*)
      wpa=2
    ;;  
    *mixed*)
      wpa=3
    ;;  
    wpa*|*psk*)
      wpa=1
    ;;  
    *)  
      wpa=0
      wpa_cipher=
    ;;
  esac

There are a few problems here, all relating to the comment and case of “*mixed*”

First and most importantly, setting wpa=3 causes hostapd to *exit* with an error and not bring up any configured ssid on the given radio.

Second, this was found when trying to set wep+mixed, which matches on *mixed* and completely breaks not only the wep setting, but the entire radio config. this should likely be changed to {wpa,psk}-mixed* or something similar to avoid colliding with wep+mixed. This will still leave those settings broken (as wpa=3 appears to be invalid) but at least it won’t improperly break wep+mixed as well.

Lastly, wpa3 is going to be a thing soon, so whatever is expecting wpa=3 is likely wrong and should be updated.

14.05.20192283Base systemBug ReportMediumLowm76: crash when creating an additional monitor interfac...TrunkAssigned Task Description

OpenWrt: b65a270c851ee422f26a0af10c879ebb87cb8f76
mt76: 4.14.108+2019-03-27-a11b6734-1

While debugging an unicast wifi bug, I tried to create a mon0 interface
iw wlan0 interface add mon0 type monitor.

Modules:	mt7603e@830f0000+87a0	mt76@83128000+6060	mac80211@83080000+6a240	iptable_raw@83111000+2e0	iptable_nat@831c5000+340	iptable_mangle@83bd7000+400	iptable_filter@83135000+360	ipt_REJECT@831c3000+3a0	ipt_MASQUERADE@8311f000+280	ipt_ECN@83bca000+560	ip_tables@831c0000+2650	cfg80211@83000000+35fb0	xt_time@83bbd000+6c0	xt_tcpudp@83baa000+6e0	xt_tcpmss@831ac000+400	xt_statistic@8311d000+320	xt_state@83151000+2a0xt_recent@831ae000+1bf0	xt_nat@83bd0000+5e0	xt_multiport@83bd6000+4e0	xt_mark@83134000+280	xt_mac@83bd3000+240	xt_limit@8315f000+480	xt_length@83125000+2a0	xt_hl@83132000+300	xt_helper@83126000+340	xt_ecn@83127000+520	xt_dscp@8313c000+3c0	xt_conntrack@83ba8000+8e0	xt_connmark@8311c000+420	xt_connlimit@83136000+1110	xt_connbytes@83bcd000+620	xt_comment@83117000+1c0	xt_TCPMSS@83bd2000+800	xt_REDIRECT@83bce000+2a0	xt_LOG@83bcc000+280	xt_HL@83bc9000+520	xt_FLOWOFFLOAD@83bc7000+ab0	xt_DSCP@8313b000+5c0	xt_CT@8313d000+9e0	xt_CLASSIFY@83131000+220	x_tables@83bc0000+30f0	nf_reject_ipv4@83130000+780	nf_nat_redirect@8311e000+560	nf_nat_masquerade_ipv4@83bac000+590	nf_conntrack_ipv4@83bb8000+1100	nf_nat_ipv4@83bba000+c70	nf_nat@83120000+2250	nf_log_ipv4@83bad000+dc0	nf_log_common@83116000+980	nf_flow_table_hw@83bbe000+820	nf_flow_table@83ba4000+3310	nf_defrag_ipv4@83153000+3e0	nf_conntrack_rtcache@83112000+8a0	compat@83118000+1700	act_connmark@83113000+850	nf_conntrack@83100000+d2c0	sch_tbf@8314e000+1680	sch_ingress@8314a000+4a0	sch_htb@83ba0000+36d0	sch_hfsc@83158000+39e0	em_u32@831ba000+200	cls_u32@83154000+2330	cls_tcindex@8314c000+15c0	cls_route@831be000+1540	cls_matchall@831a3000+a20	cls_fw@83144000+1000	cls_flow@83148000+1780	cls_basic@831bb000+d00	act_skbedit@831b4000+9f0	act_mirred@831b5000+e50	ifb@831a0000+be0	l2tp_ip@8316e000+1410	l2tp_eth@831a4000+a00	l2tp_netlink@831a6000+1f90	l2tp_core@831a8000+3110	udp_tunnel@83b99000+920	leds_gpio@83b4f000+b20	gpio_button_hotplug@83b50000+1900
<6>[    0.191477] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.197077] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.203431] NET: Registered protocol family 1
<7>[    0.207612] PCI: CLS 0 bytes, default 32
<4>[    0.210849] Crashlog allocated RAM at address 0x3f00000
<6>[    0.217463] workingset: timestamp_bits=30 max_order=14 bucket_order=0
<6>[    0.229138] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.234765] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<6>[    0.254072] io scheduler noop registered
<6>[    0.257804] io scheduler deadline registered (default)
<6>[    0.263580] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
<6>[    0.270756] console [ttyS0] disabled
<6>[    0.274257] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
<6>[    0.282984] console [ttyS0] enabled
<6>[    0.289970] bootconsole [early0] disabled
<3>[    0.298544] cacheinfo: Failed to find cpu0 device node
<4>[    0.303799] cacheinfo: Unable to detect cache hierarchy for CPU 0
<6>[    0.310628] spi-mt7621 10000b00.spi: sys_freq: 193333333
<6>[    0.329261] m25p80 spi0.0: s25fl064k (8192 Kbytes)
<5>[    0.334207] 4 fixed-partitions partitions found on MTD device spi0.0
<5>[    0.340643] Creating 4 MTD partitions on "spi0.0":
<5>[    0.345526] 0x000000000000-0x000000020000 : "boot"
<5>[    0.351255] 0x000000020000-0x0000007c0000 : "firmware"
<5>[    0.359405] 2 tplink-fw partitions found on MTD device firmware
<5>[    0.365482] Creating 2 MTD partitions on "firmware":
<5>[    0.370527] 0x000000000000-0x00000014f3a3 : "kernel"
<5>[    0.376451] 0x00000014f3a4-0x0000007a0000 : "rootfs"
<5>[    0.382277] mtd: device 3 (rootfs) set to be root filesystem
<5>[    0.389534] 1 squashfs-split partitions found on MTD device rootfs
<5>[    0.395888] 0x000000390000-0x0000007a0000 : "rootfs_data"
<5>[    0.402220] 0x0000007c0000-0x0000007d0000 : "config"
<5>[    0.408051] 0x0000007d0000-0x000000800000 : "factory"
<6>[    0.414688] libphy: Fixed MDIO Bus: probed
<6>[    0.431000] rt3050-esw 10110000.esw: link changed 0x00
<6>[    0.437801] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
<6>[    0.447188] NET: Registered protocol family 17
<6>[    0.451831] 8021q: 802.1Q VLAN Support v1.8
<6>[    0.468953] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
<6>[    0.476929] Freeing unused kernel memory: 136K
<4>[    0.481474] This architecture does not have kernel memory protection.
<14>[    1.719920] init: Console is alive
<14>[    1.723707] init: - watchdog -
<5>[    2.267376] random: fast init done
<14>[    3.000227] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<14>[    3.073195] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[    3.091032] init: - preinit -
<6>[    4.256850] rt3050-esw 10110000.esw: link changed 0x00
<5>[    4.687762] random: procd: uninitialized urandom read (4 bytes read)
<13>[    4.780523] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
<12>[    4.822673] urandom-seed: Seed file not found (/etc/urandom.seed)
<14>[    4.918017] procd: - early -
<14>[    4.921055] procd: - watchdog -
<14>[    5.550307] procd: - watchdog -
<14>[    5.553880] procd: - ubus -
<5>[    5.600493] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[    5.667639] random: ubusd: uninitialized urandom read (4 bytes read)
<14>[    5.675598] procd: - init -
<14>[    6.002174] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[    6.011883] l2tp_core: L2TP core driver, V2.0
<6>[    6.017941] l2tp_netlink: L2TP netlink interface
<6>[    6.024375] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
<6>[    6.032295] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
<6>[    6.044769] Mirror/redirect action on
<6>[    6.141161] u32 classifier
<6>[    6.143986]     input device check on
<6>[    6.147693]     Actions configured
<6>[    6.239795] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
<6>[    6.260517] Loading modules backported from Linux version v4.19.23-0-g67d52fae61c1
<6>[    6.268272] Backport generated by backports.git v4.19.23-1-0-g480a925a
<6>[    6.488990] xt_time: kernel timezone is -0000
<6>[    6.514755] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    6.566528] mt76_wmac 10300000.wmac: ASIC revision: 76280001
<6>[    7.593554] mt76_wmac 10300000.wmac: Firmware Version: 20151201
<6>[    7.599575] mt76_wmac 10300000.wmac: Build Time: 20151201183641
<6>[    7.621350] mt76_wmac 10300000.wmac: firmware init done
<6>[    7.728549] rt3050-esw 10110000.esw: link changed 0x01
<7>[    7.792147] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<14>[    7.802137] kmodloader: done loading kernel modules from /etc/modules.d/*
<4>[    9.177342] urandom_read: 6 callbacks suppressed
<5>[    9.177353] random: jshn: uninitialized urandom read (4 bytes read)
<6>[   11.971477] rt3050-esw 10110000.esw: link changed 0x00
<6>[   15.521829] rt3050-esw 10110000.esw: link changed 0x01
<6>[   40.298153] rt3050-esw 10110000.esw: link changed 0x00
<6>[   43.783225] rt3050-esw 10110000.esw: link changed 0x01
<6>[   44.432507] device eth0 entered promiscuous mode
<6>[   50.910274] br-lan: port 1(eth0.1) entered blocking state
<6>[   50.915855] br-lan: port 1(eth0.1) entered disabled state
<6>[   50.921660] device eth0.1 entered promiscuous mode
<6>[   50.939619] br-lan: port 1(eth0.1) entered blocking state
<6>[   50.945176] br-lan: port 1(eth0.1) entered forwarding state
<6>[   51.073380] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.080911] device eth0.1 left promiscuous mode
<6>[   51.085686] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.170750] br-lan: port 1(eth0.1) entered blocking state
<6>[   51.176313] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.182108] device eth0.1 entered promiscuous mode
<6>[   51.234695] br-lan: port 1(eth0.1) entered blocking state
<6>[   51.240185] br-lan: port 1(eth0.1) entered forwarding state
<6>[   54.284409] br-lan: port 2(wlan0) entered blocking state
<6>[   54.290155] br-lan: port 2(wlan0) entered disabled state
<6>[   54.295937] device wlan0 entered promiscuous mode
<6>[   55.227079] br-lan: port 2(wlan0) entered blocking state
<6>[   55.232548] br-lan: port 2(wlan0) entered forwarding state
<6>[   65.499313] device wlan0 left promiscuous mode
<6>[   65.504001] br-lan: port 2(wlan0) entered disabled state
<6>[   67.659749] br-lan: port 2(wlan0) entered blocking state
<6>[   67.665252] br-lan: port 2(wlan0) entered disabled state
<6>[   67.670929] device wlan0 entered promiscuous mode
<6>[   67.675848] br-lan: port 2(wlan0) entered blocking state
<6>[   67.681236] br-lan: port 2(wlan0) entered forwarding state
<6>[   67.687263] br-lan: port 2(wlan0) entered disabled state
<6>[   70.171904] br-lan: port 2(wlan0) entered blocking state
<6>[   70.177326] br-lan: port 2(wlan0) entered forwarding state
<4>[   74.063128] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
<4>[   74.076565] jffs2_build_filesystem(): unlocking the mtd device... 
<4>[   74.076626] done.
<4>[   74.084920] jffs2_build_filesystem(): erasing all blocks after the end marker... 
<5>[   75.341427] random: crng init done
<4>[   89.806667] done.
<5>[   89.808667] jffs2: notice: (2808) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
<4>[   90.097054] overlayfs: upper fs does not support tmpfile.
<6>[95491.758861] device wlan0 left promiscuous mode
<6>[95491.763556] br-lan: port 2(wlan0) entered disabled state
<6>[95496.123525] br-lan: port 2(wlan0) entered blocking state
<6>[95496.128998] br-lan: port 2(wlan0) entered disabled state
<6>[95496.134779] device wlan0 entered promiscuous mode
<6>[95496.139678] br-lan: port 2(wlan0) entered blocking state
<6>[95496.145064] br-lan: port 2(wlan0) entered forwarding state
<6>[95496.151480] br-lan: port 2(wlan0) entered disabled state
<6>[95497.434477] br-lan: port 2(wlan0) entered blocking state
<6>[95497.439926] br-lan: port 2(wlan0) entered forwarding state
<6>[181891.461089] device wlan0 left promiscuous mode
<6>[181891.465866] br-lan: port 2(wlan0) entered disabled state
<6>[181895.862824] br-lan: port 2(wlan0) entered blocking state
<6>[181895.868387] br-lan: port 2(wlan0) entered disabled state
<6>[181895.874262] device wlan0 entered promiscuous mode
<6>[181897.223872] br-lan: port 2(wlan0) entered blocking state
<6>[181897.229417] br-lan: port 2(wlan0) entered forwarding state
<6>[268291.119138] device wlan0 left promiscuous mode
<6>[268291.123910] br-lan: port 2(wlan0) entered disabled state
<6>[268296.605568] br-lan: port 2(wlan0) entered blocking state
<6>[268296.611162] br-lan: port 2(wlan0) entered disabled state
<6>[268296.616932] device wlan0 entered promiscuous mode
<6>[268298.034899] br-lan: port 2(wlan0) entered blocking state
<6>[268298.040440] br-lan: port 2(wlan0) entered forwarding state
<6>[354690.783285] device wlan0 left promiscuous mode
<6>[354690.788153] br-lan: port 2(wlan0) entered disabled state
<6>[354695.110340] br-lan: port 2(wlan0) entered blocking state
<6>[354695.115924] br-lan: port 2(wlan0) entered disabled state
<6>[354695.121790] device wlan0 entered promiscuous mode
<6>[354696.496658] br-lan: port 2(wlan0) entered blocking state
<6>[354696.502208] br-lan: port 2(wlan0) entered forwarding state
<6>[441090.473174] device wlan0 left promiscuous mode
<6>[441090.478041] br-lan: port 2(wlan0) entered disabled state
<6>[441094.831626] br-lan: port 2(wlan0) entered blocking state
<6>[441094.837188] br-lan: port 2(wlan0) entered disabled state
<6>[441094.843056] device wlan0 entered promiscuous mode
<6>[441094.848063] br-lan: port 2(wlan0) entered blocking state
<6>[441094.853538] br-lan: port 2(wlan0) entered forwarding state
<6>[441094.860044] br-lan: port 2(wlan0) entered disabled state
<6>[441096.143580] br-lan: port 2(wlan0) entered blocking state
<6>[441096.149126] br-lan: port 2(wlan0) entered forwarding state
<6>[527490.172730] device wlan0 left promiscuous mode
<6>[527490.177478] br-lan: port 2(wlan0) entered disabled state
<6>[527494.541946] br-lan: port 2(wlan0) entered blocking state
<6>[527494.547517] br-lan: port 2(wlan0) entered disabled state
<6>[527494.553391] device wlan0 entered promiscuous mode
<6>[527495.938895] br-lan: port 2(wlan0) entered blocking state
<6>[527495.944394] br-lan: port 2(wlan0) entered forwarding state
<1>[592589.839671] CPU 0 Unable to handle kernel paging request at virtual address 000002c8, epc == 830af554, ra == 83082384
<4>[592589.850591] Oops[#1]:
<4>[592589.852986] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.108 #0
<4>[592589.859074] task: 803cb430 task.stack: 803c6000
<4>[592589.863748] $ 0   : 00000000 80410000 00000000 00000000
<4>[592589.869140] $ 4   : 00000000 838cbd80 00000000 00000000
<4>[592589.874531] $ 8   : 838cb1c8 82f18516 00000010 43420000
<4>[592589.879922] $12   : 087f0000 00000000 000a9a0e 00000004
<4>[592589.885312] $16   : 838cbd80 00000000 830ecbc0 830ecbc0
<4>[592589.890703] $20   : 83b61bf0 830f73ac 00000001 00000000
<4>[592589.896093] $24   : 00000010 801bcbe0                  
<4>[592589.901484] $28   : 803c6000 83807e18 830ede88 83082384
<4>[592589.906876] Hi    : 005a1ac2
<4>[592589.909878] Lo    : ef14c145
<4>[592589.912889] epc   : 830af554 0x830af554 [mac80211@83080000+0x6a240]
<4>[592589.919330] ra    : 83082384 0x83082384 [mac80211@83080000+0x6a240]
<4>[592589.925764] Status: 1100e403	KERNEL EXL IE 
<4>[592589.930096] Cause : 00800008 (ExcCode 02)
<4>[592589.934243] BadVA : 000002c8
<4>[592589.937246] PrId  : 00019655 (MIPS 24KEc)
<4>[592589.941392] Modules linked in: mt7603e mt76 mac80211 iptable_raw iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY x_tables nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_log_common nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache compat act_connmark nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ifb
<4>[592590.013247]  l2tp_ip l2tp_eth l2tp_netlink l2tp_core udp_tunnel leds_gpio gpio_button_hotplug
<4>[592590.021995] Process swapper (pid: 0, threadinfo=803c6000, task=803cb430, tls=00000000)
<4>[592590.030101] Stack : 83807e7c 0000008a 00000000 838cbd80 838cbd80 83082384 00000050 830ecbc0
<4>[592590.038670]         83b61bf0 830f73ac 830ed4e0 00000000 838cb180 00000000 00000000 830ecbc0
<4>[592590.047239]         83b61bf0 830f73ac 830ed4e0 00000001 830ecbc0 830adb78 00000cfc 0000033f
<4>[592590.055808]         8381b800 00000080 00000000 00000000 00060036 00000000 830ed4e0 83b61bf0
<4>[592590.064376]         00000004 00000003 00000006 830f73f0 83807ee0 80058f30 803dfc40 00000003
<4>[592590.072945]         ...
<4>[592590.075510] Call Trace:
<4>[592590.075556] [<83082384>] 0x83082384 [mac80211@83080000+0x6a240]
<4>[592590.084214] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.090146] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.096068] [<830adb78>] 0x830adb78 [mac80211@83080000+0x6a240]
<4>[592590.102173] [<830f73f0>] 0x830f73f0 [mt7603e@830f0000+0x87a0]
<4>[592590.108088] [<80058f30>] 0x80058f30
<4>[592590.111724] [<830b4d80>] 0x830b4d80 [mac80211@83080000+0x6a240]
<4>[592590.117809] [<80009e70>] 0x80009e70
<4>[592590.121449] [<830f7548>] 0x830f7548 [mt7603e@830f0000+0x87a0]
<4>[592590.127377] [<8002d078>] 0x8002d078
<4>[592590.130998] [<80009e70>] 0x80009e70
<4>[592590.134619] [<80351a20>] 0x80351a20
<4>[592590.138240] [<8005d978>] 0x8005d978
<4>[592590.141866] [<80058f30>] 0x80058f30
<4>[592590.145491] [<80009e70>] 0x80009e70
<4>[592590.149109] 
<4>[592590.150701] Code: 27bdffe8  afbf0014  afb00010 <8c9002c8> 8caa00a4  1080001e  8e090438  8e030044  0123402a 
<4>[592590.160690] 
<4>[592590.162335] ---[ end trace 25bbd90279e222f9 ]---

===================================
25.11.20192632KernelBug ReportVery LowLowIncomplete HNAPT FoE entries, HW flow offloading not wo...TrunkAssigned Task Description

Using current snapshot, HW flow offloading is not working. Hardware flow offloading entries seem to be incomplete. Most of them lack new addresses, ports and MAC addreses. Interestingly, the only entries which are complete are for flows which are reflected by NAT (port forwarding). But packets of these flows also seem to go via the software path, as counters in conntrack keep increasing (I assume that with HW flow offloading accounting should not work.).

Model
ASUS RT-AC65P
Architecture
MediaTek MT7621 ver:1 eco:3
Firmware Version
OpenWrt SNAPSHOT r11583-68fb38548b / LuCI Master git-19.327.83508-5e1253f
Kernel Version
4.14.155

root@OpenWrt:~# cat /sys/kernel/debug/mtk_ppe/all_entry | grep state=[^I]
(302)0x00302|state=UNBIND|type=IPV4_HNAPT|92.119.160.52:57404->217.144.202.174:48022=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100001fc|info2=0x0|vlan1=0|vlan2=0
(3d2)0x003d2|state=UNBIND|type=IPV4_HNAPT|45.88.79.190:53312->217.144.204.173:37185=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100000f8|info2=0x0|vlan1=0|vlan2=0
(3ea)0x003ea|state=UNBIND|type=IPV4_HNAPT|45.88.79.190:54235->217.144.204.173:52164=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100001fb|info2=0x0|vlan1=0|vlan2=0
(456)0x00456|state=UNBIND|type=IPV4_HNAPT|103.79.154.155:29724->217.144.204.173:23=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100001f9|info2=0x0|vlan1=0|vlan2=0
(49e)0x0049e|state=UNBIND|type=IPV4_HNAPT|192.168.1.100:64590->139.59.210.197:443=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100000f6|info2=0x0|vlan1=0|vlan2=0
(4b8)0x004b8|state=UNBIND|type=IPV4_HNAPT|139.59.210.197:443->217.144.XXX.YYY:64592=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100000f6|info2=0x0|vlan1=0|vlan2=0
(52e)0x0052e|state=UNBIND|type=IPV4_HNAPT|185.175.93.105:59022->217.144.205.174:18789=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100000f8|info2=0x0|vlan1=0|vlan2=0
(536)0x00536|state=UNBIND|type=IPV4_HNAPT|192.168.1.100:64041->192.168.1.1:22=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100001fc|info2=0x0|vlan1=0|vlan2=0
(560)0x00560|state=UNBIND|type=IPV4_HNAPT|192.168.1.100:62177->217.144.XXX.YYY:25094=>192.168.1.1:1024->192.168.1.250:94|40:b0:76:3e:c7:7c=>f0:de:f1:07:c3:04|etype=0x0800|info1=0x500001fa|info2=0x7ff020|vlan1=1|vlan2=0
(61a)0x0061a|state=UNBIND|type=IPV4_HNAPT|195.150.8.21:3194->217.144.XXX.YYY:62461=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x500000f7|info2=0x0|vlan1=0|vlan2=0
(69c)0x0069c|state=UNBIND|type=IPV4_HNAPT|192.168.1.100:64591->139.59.210.197:443=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100000f6|info2=0x0|vlan1=0|vlan2=0
(728)0x00728|state=UNBIND|type=IPV4_HNAPT|51.91.212.79:37854->217.144.XXX.YYY:6443=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100000f6|info2=0x0|vlan1=0|vlan2=0
(8c2)0x008c2|state=UNBIND|type=IPV4_HNAPT|185.143.223.185:57177->217.144.204.173:37638=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100000f8|info2=0x0|vlan1=0|vlan2=0
(a8a)0x00a8a|state=UNBIND|type=IPV4_HNAPT|92.118.37.86:44194->217.144.205.210:1656=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100000f9|info2=0x0|vlan1=0|vlan2=0
(ae8)0x00ae8|state=UNBIND|type=IPV4_HNAPT|185.176.221.238:49680->217.144.204.52:60090=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100001fa|info2=0x0|vlan1=0|vlan2=0
(c1e)0x00c1e|state=UNBIND|type=IPV4_HNAPT|45.88.79.190:53312->217.144.204.116:36732=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100001fc|info2=0x0|vlan1=0|vlan2=0
(c58)0x00c58|state=UNBIND|type=IPV4_HNAPT|79.100.86.244:20241->217.144.XXX.YYY:36662=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x500001fc|info2=0x0|vlan1=0|vlan2=0
(c66)0x00c66|state=UNBIND|type=IPV4_HNAPT|94.23.90.20:443->217.144.205.89:54228=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100001fb|info2=0x0|vlan1=0|vlan2=0
(cc8)0x00cc8|state=UNBIND|type=IPV4_HNAPT|192.168.1.250:94->192.168.1.1:1024=>217.144.XXX.YYY:25094->192.168.1.100:62177|40:b0:76:3e:c7:7c=>90:2b:34:35:7d:d5|etype=0x0800|info1=0x500000fa|info2=0x7ff020|vlan1=1|vlan2=0
(dec)0x00dec|state=UNBIND|type=IPV4_HNAPT|45.88.79.190:53312->217.144.204.142:38783=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100000f8|info2=0x0|vlan1=0|vlan2=0
(f28)0x00f28|state=UNBIND|type=IPV4_HNAPT|192.168.1.100:64352->192.168.1.1:80=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100001fc|info2=0x0|vlan1=0|vlan2=0
(f2a)0x00f2a|state=UNBIND|type=IPV4_HNAPT|192.168.1.100:64353->192.168.1.1:80=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100001fc|info2=0x0|vlan1=0|vlan2=0
(f2c)0x00f2c|state=UNBIND|type=IPV4_HNAPT|192.168.1.100:64354->192.168.1.1:80=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100001fc|info2=0x0|vlan1=0|vlan2=0
(f56)0x00f56|state=UNBIND|type=IPV4_HNAPT|192.168.1.100:64351->192.168.1.1:80=>0.0.0.0:0->0.0.0.0:0|00:00:00:00:00:00=>00:00:00:00:00:00|etype=0x0000|info1=0x100001fc|info2=0x0|vlan1=0|vlan2=0
04.03.20202880KernelBug ReportVery LowLowwireless-regdb is outdated and faulty for at least "CH"...openwrt-19.07Assigned Task Description

The wireless-regdb Version 2019.06.03 has faulty Entries for at least “CH” and “LI”.
Some Ranges described for “CH” are even overlapping, which should not be the case AFAIK.

The Entries should actually be about the same as “DE”, fixed in commit 5dd4dbf709d38aab21cba0183cf26510054449f0 (git.kernel.org)

Source: See Link

16.03.20202905KernelBug ReportVery LowLowx86: RTC CMOS support is absent in kernel 5.4 .configTrunkAssigned Task Description

- Device problem occurs on booting

**dmesg | grep rtc**
[    1.041259] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    2.748158] hctosys: unable to open rtc device (rtc0)

**hwclock -rv**
hwclock from util-linux 2.35.1
System Time: 1584361762.617235
Trying to open: /dev/rtc0
Trying to open: /dev/rtc
Trying to open: /dev/misc/rtc
No usable clock interface found.
hwclock: Cannot access the Hardware Clock via any known method.

- Software versions of OpenWrt/LEDE release, packages, etc. Alix 2d13 Geode LX platform

**uname -a**
Linux OpenWrt 5.4.24 #0 Sun Mar 15 20:38:05 2020 i586 GNU/Linux

At ~/openwrt/build_dir/target-i386_pentium_musl/linux-x86_geode/linux-5.4.24/.config we see:

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set

- Steps to reproduce hmm... git clone && make menuconfig
changed: GCC flags -march=geode -mmmx
&& make kernel_menuconfig
changed: CONFIG_MGEODE_LX=y
&& make world

All works fine but /dev/rtc0 is absent

17.09.20192510Base systemBug ReportVery LowVery LowWNDR3700v2, WNDR3800 unable to update from ar71xx-gener...TrunkAssigned Task Description

device

  • WNDR3700v2
  • WNDR3800

Software version of OpenWrt release

  • tested on master branch

Steps to reproduce

  • install openwrt-trunk ar71xx-generic image on device
  • copy openwrt-trunk ath79 image to device
  • sysupgrade from ar71xx-generic to ath79
  • get error message that device is not correct

other

Tried that a month ago. Will add further information as soon as I find time. I would really love to patch this but will need some help. I own both devices and can test.

10.02.2017494Base systemBug ReportVery LowCriticalNETDEV WATCHDOG: ptm0 (): transmit queue 0 timed outAllNew Task Description

I have a VDSL line with Plusnet (UK) - the connection is pppoe - ptm0.101. With the supplied modem/router the line and connection is stable with no disconnects. With LEDE the connection is established and works well until it disconnects (sometimes as early as few minutes other times it stays connected up to an hour). After the disconnect there is no reconnection until a reboot. Restarting wan interface (ifdown wan/ifup wan) or dsl connection (/etc/init.d/dslcontrol stop/start) does not help.

Supply the following if possible:
- Device problem occurs on TP-w8970 and BTHomehub 5A (same crash on both lantiq based devices)
- Software versions of LEDE release, packages, etc. Tested on LEDE RC2, earlier LEDE snapshot from October 2016, Openwrt CC - same symptoms
- Steps to reproduce - VDSL connection on ptm0.101 via pppoe

Here is a trace of the crash (dmesg):

[ 1414.124413] —[ beginning trace ff034b465cdad16b ]— [ 1414.125631] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:303 dev_watchdog+0x1a8/0x2f0()
[ 1414.126471] NETDEV WATCHDOG: ptm0 (): transmit queue 0 timed out
[ 1414.132456] Modules linked in: ltq_ptm_vr9 option iptable_nat ath9k usb_wwan rt2800usb rt2800lib
pppoe nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 l2tp_ppp ipt_REJECT ipt_MASQUERADE ath9k_common
xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_policy xt_nat xt_multiport xt_mark xt_mac
xt_limit xt_length xt_id xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit
xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY usbserial rt2x00usb
rt2x00lib pppox ppp_async nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6
nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack ltq_deu_vr9 iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN
ip_tables crc_itu_t crc_ccitt cdc_acm ath9k_hw ath10k_pci ath10k_core ath mac80211 cfg80211 compat drv_dsl_cpe_api
drv_mei_cpe xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net
ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark
ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6
nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables pppoatm ppp_generic slhc
l2tp_ip6 l2tp_ip l2tp_eth sit l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel ipcomp xfrm4_tunnel xfrm4_mode_tunnel
xfrm4_mode_transport xfrm4_mode_beet esp4 ah4 tunnel4 ip_tunnel tun af_key xfrm_user xfrm_ipcomp xfrm_algo br2684 atm
drv_ifxos echainiv sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac des_generic cbc authenc usb_storage
dwc2 uhci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache aead crypto_null
[ 1414.287462] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.7 #1
[ 1414.293130] Stack : 804b0000 00000001 00000000 00000000 805172b8 80516f43 80489a24 00000000
[ 1414.293130] 80673844 00010000 80510000 805159bc 80515abc 80055664 00000003 80510000
[ 1414.293130] 80491b4c 00000000 8048ff50 80511c44 80515abc 800535b0 00000006 00000001
[ 1414.293130] 00000000 80512000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1414.293130] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1414.293130] ...
[ 1414.328618] Call Trace:
[ 1414.331095] [<800178a8>] show_stack+0×50/0×84 [ 1414.335454] [<8002af48>] warn_slowpath_common+0xa0/0xd0
[ 1414.340670] [<8002afa4>] warn_slowpath_fmt+0x2c/0×38 [ 1414.345636] [<802e637c>] dev_watchdog+0x1a8/0x2f0
[ 1414.350348] [<8005f7b0>] call_timer_fn.isra.5+0×24/0×80 [ 1414.355557] [<8005fa2c>] run_timer_softirq+0x1a4/0×208 [ 1414.360694] [<8002de80>] __do_softirq+0×298/0x2b0
[ 1414.365388] [<80002430>] ret_from_irq+0×0/0×4 [ 1414.369760] [<80013a8c>] r4k_wait_irqoff+0×18/0×20 [ 1414.374528] [<8004ff6c>] cpu_startup_entry+0xa4/0xf8
[ 1414.379508] [<80539bf8>] start_kernel+0×474/0×494 [ 1414.384180]
[ 1414.385631] —[ end trace ff034b465cdad16b ]—

 


26.12.20192695KernelBug ReportVery LowCriticalKernel panic during boot on Gehua ghl-r-001TrunkNew Task Description

See https://github.com/openwrt/openwrt/pull/2483

without this patch the ghl-r-001 cannot be boot.

reproduct in both 19.7-rc2 and git master.

27.10.2016253Base systemBug ReportVery LowHighMulticast over wireless ceases to work properly after a...AllNew Task Description

I am having a problem on a UBNT UAP-LR where, if many clients stay connected the router for a long time, multicast packets will stop being reliably sent to the wireless clients. I can reproduce this with LEDE r1953, but it goes back at least as far as OpenWRT 15.05.1 with kernel 3.18. I can not, however, reproduce it on another network with the same WAP but with only one or two wireless clients.

This originally manifested as IPv6 ceasing to work since the (multicasted) RA packets were not reaching the wireless clients. I used tcpdump on the WAP and determined that the RAs were arriving through the wired interface and leaving through the wireless interface as they should, but tcpdump on the client indicates that a vast majority of the RAs are never received. (Please note that the IPv6 issue is not reproducible with the router running OpenWRT/LEDE and odhcpd, since odhcpd unicasts RAs sent as a response to an RS instead of multicasting them, while it is reproducible when the router is running radvd, for example as pfSense does.)

29.01.20181311Base systemBug ReportVery LowHighprocd: mount /tmp with zramTrunkNew Task Description

Supply the following if possible:
- Device problem occurs on all device
- Software versions of OpenWrt/LEDE: Trunk

If i select this option in menuconfig, At the boot procd mount the wrong size of ram. I have 512mb of ram and procd mount only 11mb of ram. More detail here.
http://lists.infradead.org/pipermail/lede-dev/2018-January/011008.html

https://forum.lede-project.org/t/no-space-left-in-tmp/11000/14


17.07.20181665Base systemBug ReportVery LowHighNetgear r6100 (ar71xx) does not recognize 5Ghz wlan int...openwrt-18.06New Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Problem occurs on Netgear R6100

Software version 18.06 rc2 (also on rc1)

Steps to reproduce:
1) upgrade to 18.06 rc2
2) log in and check for existence of wlan0 & wlan1 (showing both 2.4 & 5 Ghz wifi interfaces are present). OR in LuCI, check that there is radio0 and radio1

Attaching dmesg and logread from boot of 18.06 rc2

10.03.20192176KernelBug ReportMediumHighubiquiti loco xw (AR9342 Rev.2) stops receiving on wire...AllNew Task Description

This bug has been existing as long as the ubiquiti loco xw 5 ghz hardware is around, probably what we are dealing with is a hardware bug in the AR9342 Rev. 2 chip. It is somehow hard to reproduce, but it hits us reliable every couple of hours, sometimes days, running any version of OpenWrt up to todays master branch. It just happened again and this time I decided to check if the bug is actually listed on FS – in addition to creating the usual cron-job executing `iw dev wlan0 scan` every minute. There is even a watchdog in the community libremesh repository designed to catch exactly this bug:
https://github.com/libremesh/lime-packages/blob/master/packages/cotonete/Makefile#L21

So to run into it, here we got 2 ubiquiti nanobeam m5 devices running OpenWrt ar71xx/generic loco-m-xw pointing at each other over a distance of roughly 2km. This link is acceptable, but not perfect and slightly asymmetric.

Device A (worse RX SNR):

Station f0:9f:c2:xx:xx:7a (on wlan0-mesh)
	inactive time:	0 ms
	rx bytes:	1433997029
	rx packets:	8589913
	tx bytes:	23160025785
	tx packets:	15667682
	tx retries:	677924
	tx failed:	0
	rx drop misc:	30076
	signal:  	-76 [-79, -79] dBm
	signal avg:	-74 [-77, -77] dBm
	Toffset:	4887897799 us
	tx bitrate:	43.3 MBit/s MCS 10 short GI
	rx bitrate:	43.3 MBit/s MCS 4 short GI
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18117 seconds

Device B (better RX SNR)

Station fc:ec:da:xx:xx:8c (on wlan0-mesh)
	inactive time:	20 ms
	rx bytes:	23442553203
	rx packets:	16047526
	tx bytes:	1274688573
	tx packets:	8251479
	tx retries:	1337700
	tx failed:	2932
	rx drop misc:	45195
	signal:  	-72 [-79, -73] dBm
	signal avg:	-71 [-78, -73] dBm
	Toffset:	18446744068821653812 us
	tx bitrate:	57.8 MBit/s MCS 11 short GI
	rx bitrate:	43.3 MBit/s MCS 10 short GI
	last ack signal:24 dBm
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18179 seconds

Now it so happens that device A (and always only device A!) becomes deaf after some hours of mostly sending lots of traffic to device B. It will continue to send beacons, but loose all associations. device B will keep trying setting up a link, but it keeps ending up in ‘BLOCKED’ state and dumps using a monitor mode interface show that device A simply doesn’t react at all to any of the frames send by device B. A simple `iw dev wlan0 scan` on device A (which doesn’t give any results) fixes the problem.

The channel seems rather unused otherwise and signal quality only varies by weather conditions. Interestingly this seems to happen on non-DFS channels only. And it happens on Ad-Hoc mode (unencrypted, never tried encrypted) and 802.11s (open ie. setup via `iw` tool as well as with SAE ie. running `wpa_supplicant`) equally. It doesn’t happen on all nodes, but only on those with rather bad signal or at least one far-off neighbor.

Maybe related to FS#1246

I saw this occuring on ubnt nanostation loco m5 XW as well as on all nanobeam m5 variants (which is supposedly compatible with the loco-m-xw image).

ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47

WiFi EEPROM of the devices:

*
00001000  02 02 F0 9F C2 XX XX XX  00 30 3a 31 35 3a 36 64  |.....XXX.0:15:6d|
00001010  3a 64 64 3a 64 65 3a 61  64 00 00 00 00 00 1f 00  |:dd:de:ad.......|
00001020  33 01 00 00 00 00 04 00  00 00 2d 04 03 00 08 ff  |3.........-.....|
00001030  20 01 00 00 00 20 02 00  00 cc cc 0c 00 50 01 50  | .... .......P.P|
00001040  01 50 01 00 00 00 00 00  00 21 00 a4 00 00 00 00  |.P.......!......|
00001050  ff 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001060  0e 0e 03 00 2c e2 00 02  0e 1c e0 e0 00 0c e0 e0  |....,...........|
00001070  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001080  00 00 00 00 00 00 00 00  00 00 70 89 ac 00 00 00  |..........p.....|
00001090  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000010c0  00 00 00 70 ac 70 89 ac  70 89 ac 70 89 ac 22 22  |...p.p..p..p..""|
000010d0  22 22 22 22 22 22 22 22  20 1c 22 22 20 1c 22 22  |"""""""" ."" .""|
000010e0  20 1c 24 24 20 18 16 14  20 16 14 12 20 20 1c 14  | .$$ ... ...  ..|
000010f0  24 24 20 18 16 14 20 16  14 12 20 20 1c 14 24 24  |$$ ... ...  ..$$|
00001100  20 18 16 14 20 16 14 12  20 20 1c 14 22 22 1e 16  | ... ...  ..""..|
00001110  14 12 1e 14 12 10 20 20  1c 14 22 22 1e 16 14 12  |......  ..""....|
00001120  1e 14 12 10 20 20 1c 14  22 22 1e 16 14 12 1e 14  |....  ..""......|
00001130  12 10 20 20 1c 14 11 12  15 17 41 42 45 47 31 32  |..  ......ABEG12|
00001140  35 37 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |57pu..pu..pu..pu|
00001150  ac b8 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |..pu..pu..pu..pu|
*
00001170  ac b8 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |..<|<|<|<|<|<|<||
00001180  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
000011a0  3c 7c 10 01 00 00 22 22  02 00 00 00 00 00 00 00  |<|....""........|
000011b0  00 00 00 00 00 00 44 00  00 00 00 00 00 ff 00 00  |......D.........|
000011c0  00 00 00 00 00 00 00 00  00 00 00 00 ff 0e 0e 03  |................|
000011d0  00 2d e2 00 02 0e 1c 00  00 00 00 00 00 00 00 00  |.-..............|
000011e0  00 00 00 00 00 00 00 00  00 44 44 00 00 00 00 00  |.........DD.....|
000011f0  00 00 00 00 00 00 00 4c  58 68 8c a4 b4 bd cd d9  |.......LXh......|
00001200  00 89 00 00 00 dc 00 89  00 00 00 e0 00 8a 00 00  |................|
00001210  00 e2 00 8b 00 00 00 de  00 8b 00 00 00 de 00 8b  |................|
00001220  00 00 00 dc 00 89 00 00  00 da 00 8b 00 00 00 e0  |................|
00001230  00 89 00 00 00 e4 00 8a  00 00 00 e7 00 8b 00 00  |................|
00001240  00 e6 00 8b 00 00 00 e2  00 8c 00 00 00 e1 00 8c  |................|
00001250  00 00 00 df 00 8b 00 00  00 dd 00 8b 00 00 00 00  |................|
00001260  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00001280  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 4c  |...............L|
00001290  54 68 78 8c a0 b4 c5 4c  54 68 78 8c a0 b4 c5 4c  |Thx....LThx....L|
000012a0  54 68 78 8c a0 b4 c5 26  20 1e 1c 26 20 1e 1c 26  |Thx....& ..& ..&|
000012b0  20 1e 1c 26 20 1e 1c 26  20 1e 1c 26 20 1e 1c 26  | ..& ..& ..& ..&|
000012c0  20 1e 1c 26 20 1e 1c 26  22 20 1e 1c 1a 20 1e 1c  | ..& ..&" ... ..|
000012d0  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
000012e0  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
000012f0  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001300  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001310  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001320  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
00001330  1e 1c 1a 00 00 00 00 26  22 20 1e 1c 1a 20 1e 1c  |.......&" ... ..|
00001340  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
00001350  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
00001360  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001370  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001380  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001390  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
000013a0  1e 1c 1a 00 00 00 00 10  16 18 40 46 48 30 36 38  |..........@FH068|
000013b0  4c 54 68 78 8c a0 b9 cd  4c 54 68 78 8c a0 b9 cd  |LThx....LThx....|
*
000013f0  4c 54 68 78 8c a0 b9 cd  3c 7c 3c 7c 3c 7c 3c 7c  |LThx....<|<|<|<||
00001400  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
00001440  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
01.04.20192216KernelBug ReportVery LowHighath79 - eth0 Spasmodic Link Speed After Driver Changes?...openwrt-19.07New Task Description

I’ve built the latest version of OpenWRT with stock packages and configuration, however, after random amounts of time, all clients lose connectivity because the eth0 link speed drops from the regular 100 Mbps Full Duplex to 10 Mbps Half Duplex, only to reconnect again after a couple of minutes (seconds to mintes, it depends), and do it again at another random time.

[18580.106696] eth0: link up (100Mbps/Full duplex)
[19014.825937] eth0: link up (10Mbps/Half duplex)
[19055.384105] eth0: link up (100Mbps/Full duplex)
[21927.853366] eth0: link up (10Mbps/Half duplex)
[22003.771999] eth0: link up (100Mbps/Full duplex)
[23743.685216] eth0: link down
[23744.723679] eth0: link up (100Mbps/Full duplex)
[23756.242265] eth0: link down
[23757.283590] eth0: link up (100Mbps/Full duplex)
[24075.522397] eth0: link up (10Mbps/Half duplex)
[24090.081802] eth0: link up (100Mbps/Full duplex)
[24100.481809] eth0: link up (10Mbps/Half duplex)
[24166.001178] eth0: link up (100Mbps/Full duplex)
[24500.880989] eth0: link up (10Mbps/Half duplex)

The logs aren’t very useful, it seems. Both syslog and dmesg show the same.

I suspect this started happening after this series of commits (ending with this one) where there were driver changes to the switch, as it didn’t happen before I recompiled a new build with all those newer changes:
https://github.com/openwrt/openwrt/commit/3d93b35f039de86830565420968715b300066475

28.11.20192637Base systemBug ReportHighHighhostapd ubus reload makes OpenWrt as WiFi client very u...TrunkNew Task Description

Commit 60fb4c92b6b0d1582d31e02167b90b424185f3a2 (hostapd: add ubus reload) breaks WiFi client connectivity when for some reason the association does not succeed immediately.

I started seeing this problem on all my Raspberry Pi Zero W devices, where WiFi takes a long time to come up due to the lack of entropy:

[   32.392170] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  104.672670] random: crng init done
[  104.685751] random: 3 urandom warning(s) missed due to ratelimiting
[  105.436537] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

At this point, the Raspberry Pi is associated to the AP, but the DHCP client is not running. This is the output of ifstatus lan:

{
        "up": false,
        "pending": false,
        "available": false,
        "autostart": true,
        "dynamic": false,
        "proto": "dhcp",
        "data": {

        },
        "errors": [
                {
                        "subsystem": "interface",
                        "code": "NO_DEVICE"
                }
        ]
}

Running ifup lan fixes the problem, but this is of course not easy to do on headless devices.

Later I also experienced this problem on a Raspberry Pi 3 A, which does not have the low entropy problem. In this case the delayed association was caused by a power outage, and the Raspberry Pi booted faster than the APs.

12.01.20202730KernelBug ReportVery LowHighTL-WR841N v8 ath79 Link Unstableopenwrt-19.07New Task Description

Probably related to https://bugs.openwrt.org/index.php?do=details&task_id=2216 which was reported almost a year ago. The bug is still not fixed though.

Are there any plans to fix it or will 18.06 be the last stable version for this and probably other devices?

[8451.981464] eth1: link up (100Mbps/Full duplex)
[37071.909045] eth1: link down
[37072.988861] eth1: link up (100Mbps/Full duplex)
[48492.291332] eth1: link up (10Mbps/Half duplex)
[48632.691559] eth1: link up (100Mbps/Full duplex)
[55697.449886] eth1: link down
[55698.491082] eth1: link up (100Mbps/Full duplex)
[62395.095374] eth1: link up (10Mbps/Half duplex)
[62507.411488] eth1: link up (100Mbps/Full duplex)
[62726.853998] eth1: link up (10Mbps/Half duplex)
[62732.053093] eth1: link up (100Mbps/Full duplex)
[71071.460663] eth1: link down
[71072.618285] eth1: link up (100Mbps/Full duplex)
[73435.556373] eth1: link down
[73436.597169] eth1: link up (100Mbps/Full duplex)
[73547.879987] eth1: link up (10Mbps/Half duplex)
[73558.277169] eth1: link up (100Mbps/Full duplex)
[74438.121970] eth1: link down
[74439.162824] eth1: link up (100Mbps/Full duplex)
[75341.889076] eth1: link up (10Mbps/Half duplex)
[75352.290230] eth1: link up (100Mbps/Full duplex)
[76274.772404] eth1: link down
[76275.813134] eth1: link up (100Mbps/Full duplex)

25.02.20202856Base systemBug ReportVery LowHighWifi "dies" (hostapd drops all clients) on some ar71xx ...openwrt-19.07New Task Description

This issue is very strange, i don’t even know if it’s just faulty hardware but i have it happening on multiple devices now

Most affected hardware

  • Nanobridge M5 , in this case transmitting enough data can trigger it almost instantly
  • TL-WR841ND , in this case i had it happen like 3-4 times a year
  • CPE 210 v3 , in this case it happens like each week

For the last one, which is running 19.07 i found on the system log

Tue Feb 25 07:38:58 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED [redacted mac1]
Tue Feb 25 07:38:58 2020 daemon.info hostapd: wlan0: STA [redacted mac1] IEEE 802.11: disassociated due to inactivity
Tue Feb 25 07:38:59 2020 daemon.info hostapd: wlan0: STA [redacted mac1] IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Feb 25 07:41:32 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED [redacted mac2]
Tue Feb 25 07:41:32 2020 daemon.info hostapd: wlan0: STA [redacted mac2] IEEE 802.11: disassociated due to inactivity
Tue Feb 25 07:41:33 2020 daemon.info hostapd: wlan0: STA [redacted mac2] IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Feb 25 07:42:49 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 07:49:55 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 07:55:02 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:00:15 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:05:25 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:10:44 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:16:00 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
16.08.201694Base systemBug ReportVery LowMediumnetifd: PPPoE MTU problemTrunkNew Task Description

When you set the MTU of a ppp interface with proto=pppoe and ifname=nas0 via the mtu option,
the configured mtu will not be set on the ppp interface (what you want), but on the
underlying interface named by ifname (what you normally don’t want to change).

This leeds to log messages like this:


pppd[5641]: Interface nas0 has MTU of 1448 – should be at least 1500.


and MTUs other than what you really want.

example:


desired PPPoE MTU: 1448
actual nas0 MTU: 1448
actual PPPoE MTU: 1440

This issue seems to be related to the commit 7ac29b75319fd69a8a7c0aeea7804d381ec07d3d of netifd.

Regards,
Martin

17.03.2017634Base systemBug ReportMediumMediumFactory flashing fails because LEDE filename is too lon...AllNew Task Description

On a TP-Link TL-WR841N v11, flashing LEDE from the web interface of the stock firmware is not possible.

This is caused by a stupid check that refuses filename longer than 64 chars in the web interface. The check is implemented in javascript and returns a cryptic error message like “Please select a file to upload”, as if no file was selected.

The current naming scheme is quite long:

$ echo ‘lede-17.01.0-r3205-59508e3-ar71xx-generic-tl-wr841-v11-squashfs-factory-eu.bin’ | wc -c
79

Shortening the name like the following would decrease the length below 64 chars, and leave some space for a custom suffix (e.g. using EXTRA_IMAGE_NAME in the Imagebuilder):

$ echo ‘lede-17.01.0-ar71xx-tlwr841v11-squashfs-factory-eu.bin’ | wc -c
55

18.11.20171177Base systemBug ReportVery LowMediumdnsmasq spams syslog on loss of WAN connectionTrunkNew Task Description

Supply the following if possible:
- Device problem occurs on

Observed on an APU2

- Software versions of LEDE release, packages, etc.

DISTRIB_ID='LEDE'
DISTRIB_RELEASE='SNAPSHOT'
DISTRIB_REVISION='r5244-f0c37f6ceb'
DISTRIB_CODENAME='reboot'
DISTRIB_TARGET='x86/64'
DISTRIB_ARCH='x86_64'
DISTRIB_DESCRIPTION='LEDE Reboot SNAPSHOT r5244-f0c37f6ceb'
DISTRIB_TAINTS='no-all busybox'

# opkg list_installed | grep dnsmasq
dnsmasq - 2.78-2

- Steps to reproduce

In my case, I have an upstream service provisioned with pppoe. Occasionally, the pppoe session dies as the ISP does some kind of unannounced maintenance. Since updating recently from a March 2016 build of OpenWrt, when this outage occurs, dnsmasq sends many messages, like this:

Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied
Nov 16 02:03:10 192.168.80.1 dnsmasq[27288]: failed to send packet: Permission denied

nearly 30 per second.

07.09.20181837Base systemBug ReportMediumMediumKernel oops when using wireguard and mangle/fwmarkopenwrt-18.06New Task Description

On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Ethernet interface being the head-unit connected to a VLAN switch.

Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664463] INFO: rcu_sched self-detected stall on CPU
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664907] 	1-...: (5999 ticks this GP) idle=9ee/140000000000001/0 softirq=961867/961867 fqs=2711
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.665571] 	 (t=6000 jiffies g=358062 c=358061 q=4475)
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.665986] NMI backtrace for cpu 1
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666301] CPU: 1 PID: 14102 Comm: kworker/1:0 Not tainted 4.14.63 #0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666775] Hardware name: XXXXXXXXXX
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667240] Workqueue: wg-crypt-XXXXX 0xffffffffa01dbab0 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667891] Call Trace:
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668145]  <IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668372]  0xffffffff8159c6d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668662]  0xffffffff815a0000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668950]  ? 0xffffffff810418d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669251]  0xffffffff815a0060
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669544]  0xffffffff81041924
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669836]  0xffffffff810c22e3
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670128]  0xffffffff810c176f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670421]  ? 0xffffffff8109fe35
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670720]  ? 0xffffffff810a0062
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671020]  0xffffffff810c432a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671309]  0xffffffff810d0f5e
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671599]  0xffffffff810c4c4f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671892]  0xffffffff810c4df6
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672182]  0xffffffff81602392
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672473]  0xffffffff81601a61
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672760]  </IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672994] RIP: 0010:0xffffffff814e7682
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673327] RSP: 0018:ffffc90000cb3a30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673912] RAX: 00000000000001f8 RBX: ffffc90000cb3af8 RCX: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674426] RDX: ffff880077923e00 RSI: 00000000deb48eb9 RDI: ffff88007aa28e68
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674944] RBP: ffffc90000cb3a80 R08: 0000000000000000 R09: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675456] R10: ffff88007aa28e00 R11: 0000000000000001 R12: ffff880077923e00
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675966] R13: ffffc90000cb3a90 R14: ffff8800786e3a00 R15: ffff88007a360000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676484]  0xffffffff814e7a0a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676773]  0xffffffff814e7d89
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677065]  0xffffffff81532536
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677359]  0xffffffffa01800a7 [iptable_mangle@ffffffffa0180000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677845]  0xffffffff814e2966
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678137]  0xffffffff814ed868
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678430]  ? 0xffffffff814ebed0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678725]  0xffffffff814ed897
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679014]  0xffffffff8152b6bb
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679309]  0xffffffffa002145e [udp_tunnel@ffffffffa0021000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679786]  0xffffffffa01ddf81 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680256]  ? 0xffffffff811038aa
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680555]  ? 0xffffffff810c5454
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680854]  0xffffffffa01dbb5a [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681321]  0xffffffff81091cf4
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681613]  0xffffffff8109204b
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681903]  0xffffffff81096d42
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682191]  ? 0xffffffff81091e40
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682487]  ? 0xffffffff81096c30
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682788]  0xffffffff816001ef

Bootlog:

[    0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Wed Aug 15 20:42:39 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f1b2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f1b3000-0x000000007f1fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f1fb000-0x000000007f314fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f315000-0x000000007f324fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f325000-0x000000007f33bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f344000-0x000000007f358fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f359000-0x000000007f359fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f35a000-0x000000007f377fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f378000-0x000000007f37bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f37c000-0x000000007f38afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f38b000-0x000000007f39bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39c000-0x000000007f39dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f39e000-0x000000007f39efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39f000-0x000000007f3ccfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f3cd000-0x000000007f40ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f410000-0x000000007f58efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f6e5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f6e6000-0x000000007f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Medion E1230/E1230, BIOS 208 02/10/2012
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 write-through
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffffffffff400d10]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[    0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[    0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[    0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[    0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[    0.000000] BRK [0x01e0c000, 0x01e0cfff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MEDION)
[    0.000000] ACPI: XSDT 0x000000007F315070 00005C (v01 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007F3236E8 0000F4 (v04 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007F315158 00E58C (v02 MEDION MEDIONAG 00000001 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000007F390F80 000040
[    0.000000] ACPI: APIC 0x000000007F3237E0 000072 (v03 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: SLIC 0x000000007F323858 000176 (v01 MEDION MEDIONAG 00000001 MSFT 00000001)
[    0.000000] ACPI: ECDT 0x000000007F3239D0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x000000007F323A98 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007F323AD8 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x000000007F323B10 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6effff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f1b2fff]
[    0.000000]   node   0: [mem 0x000000007f410000-0x000000007f58efff]
[    0.000000]   node   0: [mem 0x000000007f6e6000-0x000000007f6effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[    0.000000] On node 0 totalpages: 520921
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 516924 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] random: get_random_bytes called from 0xffffffff81cb0b09 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff88007ee00000 s132056 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s132056 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 512744
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2032612K/2083684K available (8200K kernel code, 527K rwdata, 1312K rodata, 1052K init, 420K bss, 51072K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.040000] tsc: Unable to calibrate against PIT
[    0.040000] tsc: using HPET reference calibration
[    0.040000] tsc: Detected 1595.996 MHz processor
[    0.040000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=15959960)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] ACPI: Core revision 20170728
[    0.068326] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.070105] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.070601] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.071425] Disabled fast string operations
[    0.071787] mce: CPU supports 5 MCE banks
[    0.072125] process: using mwait in idle threads
[    0.072500] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.072914] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.073530] Freeing SMP alternatives memory: 28K
[    0.080265] smpboot: Max logical packages: 2
[    0.081106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.190000] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.190000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.190000] ... version:                3
[    0.190000] ... bit width:              40
[    0.190000] ... generic registers:      2
[    0.190000] ... value mask:             000000ffffffffff
[    0.190000] ... max period:             000000007fffffff
[    0.190000] ... fixed-purpose events:   3
[    0.190000] ... event mask:             0000000700000003
[    0.190000] Hierarchical SRCU implementation.
[    0.190000] smp: Bringing up secondary CPUs ...
[    0.190000] x86: Booting SMP configuration:
[    0.190000] .... node  #0, CPUs:      #1
[    0.010000] Disabled fast string operations
[    0.190000]  #2
[    0.010000] Disabled fast string operations
[    0.190386]  #3
[    0.010000] Disabled fast string operations
[    0.193013] smp: Brought up 1 node, 4 CPUs
[    0.193365] smpboot: Total of 4 processors activated (12767.96 BogoMIPS)
[    0.195434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196180] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.197097] NET: Registered protocol family 16
[    0.198390] cpuidle: using governor ladder
[    0.198390] ACPI: bus type PCI registered
[    0.198390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.200004] PCI: Using configuration type 1 for base access
[    0.217580] ACPI: Added _OSI(Module Device)
[    0.217940] ACPI: Added _OSI(Processor Device)
[    0.218293] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218673] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219086] ACPI: EC: EC started
[    0.219370] ACPI: EC: interrupt blocked
[    0.222270] ACPI: \: Used as first EC
[    0.222591] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.223021] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.223763] ACPI: Executed 1 blocks of module-level executable AML code
[    0.240673] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.242268] ACPI: Dynamic OEM Table Load:
[    0.242613] ACPI: SSDT 0xFFFF88007BD5D800 0002E9 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.246636] ACPI: Dynamic OEM Table Load:
[    0.247070] ACPI: SSDT 0xFFFF88007BC81000 0006DB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.254189] ACPI: Dynamic OEM Table Load:
[    0.256660] ACPI: SSDT 0xFFFF88007C6CB000 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.257695] ACPI: Dynamic OEM Table Load:
[    0.260047] ACPI: SSDT 0xFFFF88007C7DE540 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.264783] ACPI: Interpreter enabled
[    0.265199] ACPI: (supports S0 S5)
[    0.265579] ACPI: Using IOAPIC for interrupt routing
[    0.268058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270580] ACPI: GPE 0x02 active on init
[    0.272964] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.305839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305839] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[    0.305839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.306311] PCI host bridge to bus 0000:00
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.306311] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306721] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[    0.310006] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[    0.310006] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[    0.310006] pci 0000:00:02.0: reg 0x14: [io  0xf100-0xf107]
[    0.315634] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.315634] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[    0.315634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.315960] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.315960] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.316454] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.316454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.316867] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.316867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.317285] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.317285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.317706] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.317706] pci 0000:00:1d.0: reg 0x20: [io  0xf0a0-0xf0bf]
[    0.318128] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.318128] pci 0000:00:1d.1: reg 0x20: [io  0xf080-0xf09f]
[    0.318515] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.318515] pci 0000:00:1d.2: reg 0x20: [io  0xf060-0xf07f]
[    0.318938] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.318938] pci 0000:00:1d.3: reg 0x20: [io  0xf040-0xf05f]
[    0.319336] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.319336] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[    0.319336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.320072] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.320513] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.323112] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.323112] pci 0000:00:1f.2: reg 0x10: [io  0xf0f0-0xf0f7]
[    0.323112] pci 0000:00:1f.2: reg 0x14: [io  0xf0e0-0xf0e3]
[    0.323112] pci 0000:00:1f.2: reg 0x18: [io  0xf0d0-0xf0d7]
[    0.323112] pci 0000:00:1f.2: reg 0x1c: [io  0xf0c0-0xf0c3]
[    0.323112] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf02f]
[    0.323112] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[    0.323112] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.323324] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.324155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.324284] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[    0.324284] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x18: [mem 0xdfe11000-0xdfe11fff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x20: [mem 0xdfe10000-0xdfe10fff 64bit]
[    0.324284] pci 0000:02:00.0: supports D1
[    0.324284] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.324922] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.330068] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.330359] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.330469] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.330614] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[    0.332600] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[    0.333006] pci 0000:03:00.0: supports D1 D2
[    0.333011] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.333210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.333620] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.333630] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.333927] pci 0000:04:00.0: [8086:0896] type 00 class 0x028000
[    0.334057] pci 0000:04:00.0: reg 0x10: [mem 0xdfc00000-0xdfc01fff 64bit]
[    0.334763] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.334942] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.335350] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.335528] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.336039] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.336044] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336049] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336053] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.336057] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.336062] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.336066] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[    0.336070] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.336130] pci_bus 0000:00: on NUMA node 0
[    0.337515] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.338262] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.346039] ACPI: EC: interrupt unblocked
[    0.346039] ACPI: EC: event unblocked
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.348684] SCSI subsystem initialized
[    0.349211] libata version 3.00 loaded.
[    0.349211] ACPI: bus type USB registered
[    0.349789] usbcore: registered new interface driver usbfs
[    0.350039] usbcore: registered new interface driver hub
[    0.350749] usbcore: registered new device driver usb
[    0.351384] PCI: Using ACPI for IRQ routing
[    0.351384] PCI: pci_cache_line_size set to 64 bytes
[    0.351384] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f1b3000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f58f000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[    0.352856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.353253] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.355766] clocksource: Switched to clocksource hpet
[    0.356312] pnp: PnP ACPI init
[    0.357109] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.357615] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.357767] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.358214] system 00:01: [io  0x1000-0x1003] has been reserved
[    0.358667] system 00:01: [io  0x1010-0x101f] has been reserved
[    0.359103] system 00:01: [io  0xffff] has been reserved
[    0.359513] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.359952] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.359952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:02: [io  0x06a0-0x06af] has been reserved
[    0.359952] system 00:02: [io  0x06b0-0x06ff] has been reserved
[    0.359952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.359952] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.359952] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:06: [io  0x025d] has been reserved
[    0.359952] system 00:06: [io  0x025c] has been reserved
[    0.359952] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.360167] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.360645] system 00:06: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.361121] system 00:06: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.361592] system 00:06: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.362072] system 00:06: [mem 0xfec28000-0xfec2ffff] has been reserved
[    0.362553] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.363064] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.363263] pnp 00:07: Plug and Play ACPI device, IDs SYN1d1b SYN1d00 SYN0002 PNP0f13 (active)
[    0.363394] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.363524] system 00:09: [io  0x0240-0x0259] has been reserved
[    0.363991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.364879] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[    0.365372] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.365873] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.366363] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.366857] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367408] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.367898] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.368395] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.368805] system 00:0c: [io  0x0400-0x047f] has been reserved
[    0.369252] system 00:0c: [io  0x0500-0x053f] has been reserved
[    0.369693] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.370228] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.370705] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.371182] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.371676] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[    0.372171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372179] pnp: PnP ACPI: found 13 devices
[    0.380957] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.381648] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.381656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.381662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.381681] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.381688] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.381708] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.381726] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.381733] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.381781] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.382273] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.382870] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.383462] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.384060] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.384646] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.385095] pci 0000:00:1c.1: BAR 7: assigned [io  0x3000-0x3fff]
[    0.385545] pci 0000:00:1c.3: BAR 7: assigned [io  0x4000-0x4fff]
[    0.385998] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.386387] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.386830] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.387314] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.387902] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.388285] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.388736] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.389226] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.389817] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.390233] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.390690] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.391180] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.391775] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.392157] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.392608] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.393098] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.393700] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.394103] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.394108] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.394113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394122] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394126] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394131] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394135] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394140] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.394144] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.394149] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.394153] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.394158] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.394162] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.394166] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.394171] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.394175] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.394179] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.394184] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.394188] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.394193] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.394197] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.394202] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394206] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394210] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394215] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394219] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394224] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394458] NET: Registered protocol family 2
[    0.395149] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.395801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.396424] TCP: Hash tables configured (established 16384 bind 16384)
[    0.397028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.397512] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.398146] NET: Registered protocol family 1
[    0.398540] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.401674] PCI: CLS 64 bytes, default 64
[    0.404203] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    0.408673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.411230] io scheduler noop registered
[    0.411556] io scheduler deadline registered (default)
[    0.412180] gpio_it87: Unknown Chip found, Chip 0202 Revision 2
[    0.413720] hv_vmbus: registering driver hv_pci
[    0.414138] hv_vmbus: registering driver hyperv_fb
[    0.414552] intel_idle: MWAIT substates: 0x3020220
[    0.414554] intel_idle: v0.4.1 model 0x36
[    0.415019] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.415333] ACPI: AC Adapter [AC0] (on-line)
[    0.440589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.470262] ACPI: Lid Switch [LID]
[    0.470749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.471442] ACPI: Sleep Button [SLPB]
[    0.471890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.472528] ACPI: Power Button [PWRF]
[    0.474911] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.475996] thermal LNXTHERM:00: registered as thermal_zone0
[    0.476418] ACPI: Thermal Zone [THRM] (63 C)
[    0.477238] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.480090] Non-volatile memory driver v1.3
[    0.483829] loop: module loaded
[    0.484309] Guest personality initialized and is inactive
[    0.484904] VMCI host device registered (name=vmci, major=10, minor=63)
[    0.485403] Initialized host personality
[    0.485993] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[    0.487067] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[    0.488126] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170728/utaddress-247)
[    0.489188] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20170728/utaddress-247)
[    0.490317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.VGA.TCOI) (20170728/utaddress-247)
[    0.491442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.492164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.493231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.495362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.496081] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.497151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.498214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.498935] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.499659] VMware PVSCSI driver - version 1.0.7.0-k
[    0.500186] hv_vmbus: registering driver hv_storvsc
[    0.500738] ahci 0000:00:1f.2: version 3.0
[    0.501106] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.501649] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.502258] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
[    0.504418] scsi host0: ahci
[    0.505055] scsi host1: ahci
[    0.505678] scsi host2: ahci
[    0.506330] scsi host3: ahci
[    0.506778] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[    0.507357] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[    0.507918] ata3: DUMMY
[    0.508159] ata4: DUMMY
[    0.508915] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[    0.509469] hv_vmbus: registering driver hv_netvsc
[    0.509854] Fusion MPT base driver 3.04.20
[    0.510250] Copyright (c) 1999-2008 LSI Corporation
[    0.510709] Fusion MPT SPI Host driver 3.04.20
[    0.511120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.511607] ehci-pci: EHCI PCI platform driver
[    0.512763] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.513192] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.513793] ehci-pci 0000:00:1d.7: debug port 1
[    0.514113] ACPI: Battery Slot [BAT0] (battery present)
[    0.518488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.518522] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[    0.540123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.541063] hub 1-0:1.0: USB hub found
[    0.541418] hub 1-0:1.0: 8 ports detected
[    0.542734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.543221] ohci-pci: OHCI PCI platform driver
[    0.543620] ohci-platform: OHCI generic platform driver
[    0.544568] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.544990] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.546233] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010
[    0.547982] hub 2-0:1.0: USB hub found
[    0.548435] hub 2-0:1.0: 2 ports detected
[    0.549241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.549668] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.550303] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    0.550935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.551899] hub 3-0:1.0: USB hub found
[    0.552349] hub 3-0:1.0: 2 ports detected
[    0.553301] usbcore: registered new interface driver usb-storage
[    0.553955] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.556563] i8042: Detected active multiplexing controller, rev 1.1
[    0.559170] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.559568] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.559965] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.560407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.560808] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.561255] hv_vmbus: registering driver hyperv_keyboard
[    0.561774] rtc_cmos 00:03: RTC can wake from S4
[    0.562370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.562869] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.564393] sdhci: Secure Digital Host Controller Interface driver
[    0.564865] sdhci: Copyright(c) Pierre Ossman
[    0.566006] hidraw: raw HID events driver (C) Jiri Kosina
[    0.566486] hv_vmbus: registering driver hid_hyperv
[    0.566915] usbcore: registered new interface driver usbhid
[    0.567337] usbhid: USB HID core driver
[    0.567684] hv_utils: Registering HyperV Utility Driver
[    0.568088] hv_vmbus: registering driver hv_util
[    0.568454] hv_vmbus: registering driver hv_balloon
[    0.569382] NET: Registered protocol family 10
[    0.570351] Segment Routing with IPv6
[    0.570715] NET: Registered protocol family 17
[    0.571097] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.571999] 8021q: 802.1Q VLAN Support v1.8
[    0.572509] NET: Registered protocol family 40
[    0.573685] microcode: sig=0x30661, pf=0x8, revision=0x10c
[    0.574234] microcode: Microcode Update Driver: v2.2.
[    0.574273] sched_clock: Marking stable (573441123, 0)->(657968060, -84526937)
[    0.575503] registered taskstats version 1
[    0.576740] rtc_cmos 00:03: setting system clock to 2018-09-07 16:15:12 UTC (1536336912)
[    0.584900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.831528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.834278] ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
[    0.834837] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.837583] ata1.00: configured for UDMA/133
[    0.838642] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5
[    0.841240] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.841885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.842433] sd 0:0:0:0: [sda] Write Protect is off
[    0.842862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.843052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.877982]  sda: sda1 sda2
[    0.880409] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.171549] ata2: SATA link down (SStatus 0 SControl 300)
[    1.186977] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[    1.194364] Freeing unused kernel memory: 1052K
[    1.230632] Write protecting the kernel read-only data: 12288k
[    1.235448] Freeing unused kernel memory: 2024K
[    1.252890] Freeing unused kernel memory: 736K
[    1.487895] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[    1.488460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[    1.566812] init: Console is alive
[    1.796421] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    1.821964] pps_core: LinuxPPS API ver. 1 registered
[    1.822364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.823647] PTP clock support registered
[    1.824343] Button Hotplug driver version 0.4.1
[    1.824818] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    1.830753] init: - preinit -
[    1.890124] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.267747] random: jshn: uninitialized urandom read (4 bytes read)
[    2.309827] random: jshn: uninitialized urandom read (4 bytes read)
[    2.316834] random: jshn: uninitialized urandom read (4 bytes read)
[    2.470351] usb 1-7: new high-speed USB device number 4 using ehci-pci
[    2.490506] clocksource: Switched to clocksource tsc
[    2.691721] usb-storage 1-7:1.0: USB Mass Storage device detected
[    2.692832] scsi host4: usb-storage 1-7:1.0
[    3.754161] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.765748] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.433172] urandom_read: 5 callbacks suppressed
[    5.433177] random: jshn: uninitialized urandom read (4 bytes read)
[    5.722679] F2FS-fs (loop0): Mounted with checkpoint version = 1a030d9d
[    5.751832] mount_root: switching to f2fs overlay
[    5.833723] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    5.839672] urandom-seed: Seeding with /etc/urandom.seed
[    5.914891] procd: - early -
[    6.557234] procd: - ubus -
[    6.596946] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.610617] procd: - init -
[    6.950178] kmodloader: loading kernel modules from /etc/modules.d/*
[    6.954303] tun: Universal TUN/TAP device driver, 1.6
[    6.958028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.958547] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.961325] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    6.961834] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.964069] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.426558] Netfilter messages via NETLINK v0.30.
[    7.428839] ip_set: protocol 6
[    7.450984] i2c /dev entries driver
[    7.487885] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    7.488578] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    7.492106] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.492562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.494282] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.898600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.147745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.149259] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000000b000, e8:40:f2:3f:a9:58, XID 00a00000 IRQ 30
[    8.154185] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[    8.155901] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    8.174092] xt_time: kernel timezone is -0000
[    8.411155] Intel(R) Wireless WiFi driver for Linux
[    8.411610] Copyright(c) 2003- 2015 Intel Corporation
[    8.445655] PPP generic driver version 2.4.2
[    8.447497] NET: Registered protocol family 24
[    8.454488] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    8.455168] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUG disabled
[    8.455610] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
[    8.456054] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
[    8.456529] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[    8.501089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.504079] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.792405] r8169 0000:03:00.0 eth0: link down
[   11.792453] r8169 0000:03:00.0 eth0: link down
[   11.903937] random: fast init done
[   13.415479] r8169 0000:03:00.0 eth0: link up
[   30.131354] random: crng init done
18.06.20192328Base systemBug ReportHighMediumAllocate resources to sort out odhcpd/dnsmasq interacti...TrunkNew Task Description

As IPv6 is being adopted, increasingly people are seeing dnsmasq log ‘spam’. See https://bugs.openwrt.org/index.php?do=details&task_id=1492&string=1492&search_name=&type%5B0%5D=&sev%5B0%5D=&pri%5B0%5D=&due%5B0%5D=&reported%5B0%5D=&cat%5B0%5D=&status%5B0%5D=open&percent%5B0%5D=&opened=&dev=&closed=&duedatefrom=&duedateto=&changedfrom=&changedto=&openedfrom=&openedto=&closedfrom=&closedto=

By default under openwrt, dhcpv4 leases are handled by dnsmasq whilst dhcpv6/RA is handled by openwrt’s odhcpd.

odhcpd could handle both v4 & v6 but does not yet have the same configuration flexibility for dhcp options as dnsmasq. I guess this is why no one has been brave enough to switch to odhcpd for ipv4 operations as well as ipv6.

dnsmasq can also handle dhcpv6/RA but not quite as flexibly as odhcpd. dnsmasq will automatically find IP6 prefixes on interfaces and start handling them, whilst openwrt’s strategy with odhcpd is to only handle stuff we tell you to handle, don’t do it automagically.

As dnsmasq is the default resolver for openwrt and the wider LAN, it needs to know about DHCP/hostname allocations. For DHCPv4 this is easy, dnsmasq is controlling them. For DHCPv6 a hosts file (called a statefile in the odhcpd code) is handed to dnsmasq.

By default this host file is not read dynamically, so odhcpd has to signal dnsmasq to re-read the host file (and clear caches etc etc) upon every ipv6 lease change.

This generates a lot of log spam and process startup overhead. There are also questions about service operability during this time.

Effort needs to be put into sorting this out.

Temporary workarounds:

Use ‘hostsdir’ dnsmasq option instead of ‘addn-hosts’ - dnsmasq will dynamically scan changes/additions to hosts in hostsdir whereas addn-hosts needs a SIGHUP. Host deletions cannot be handled by this method, so odhcpd would still need to SIGHUP on lease expiry. It might reduce some of the spam.

Longer term:

Teach dnsmasq to accept hostname updates over an IPC mechanism. ubus? and carry on using odhcpd for ipv6.

Teach dnsmasq to handle ipv6 prefix additions/deletions/handling via an IPC mechanism in the same way as odhcpd. Drop odhcpd and use dnsmasq for everything.

Use odhcpd for everything and use another dns resolver that interfaces nicely with odhcpd.

Why don’t I see this problem: I use dnsmasq to handle ipv6 but I’m lucky enough that this works for me.

This needs fixing/funding to sort it out though.

21.12.20192690Base systemBug ReportMediumMediumImagebuilder: "opkg_install_pkg: Package size mismatch"...AllNew Task Description

The Imagebuilder fails in the following situation:

  • download and unpack the imagebuilder
  • build an image: it works
  • wait a few days/weeks
  • try to build an image again with the same imagebuilder: it fails

It fails quite late during building with lots of errors like this:

   opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   opkg_install_cmd: Cannot install package luci.
   opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   opkg_install_cmd: Cannot install package base-files.
   opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   opkg_install_cmd: Cannot install package busybox.

This happens with stable releases (18.06.5), RC releases (19.07.0-rc2), and with several targets.

It looks like package sizes are somehow kept in a local cache during the first build, and are not updated when building again a few days later. This is strange because the imagebuilder seems to fetch new versions of the Packages.gz files.

Below is the full log.

  $ make image PROFILE=rb-nor-flash-16M"" BIN_DIR="${IMAGEBUILDER_DIR}" EXTRA_IMAGE_NAME="rzn" FILES="files/" PACKAGES="luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr -ppp -ppp-mod-pppoe -kmod-ppp -kmod-pppoe -kmod-pppox"
  
  Building images for ar71xx - MikroTik RouterBoard (16 MB SPI NOR)
  Packages: luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr base-files busybox dnsmasq dropbear firewall fstools ip6tables iptables kernel kmod-ath9k kmod-gpio-button-hotplug kmod-ledtrig-gpio libc libgcc logd mtd netifd odhcp6c odhcpd-ipv6only opkg rbcfg rssileds swconfig uboot-envtools uci uclient-fetch wpad-mini
  
  Downloading http://downloads.openwrt.org/releases/18.06.5/targets/ar71xx/mikrotik/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_core
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/base/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_base
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_luci
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_packages
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/routing/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_routing
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/telephony/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_telephony
  Downloading file:packages/Packages
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/imagebuilder
  
  Installing packages...
  Installing libc (1.1.19-2) to root...
  Installing libgcc (7.3.0-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libgcc_7.3.0-2_mips_24kc.ipk.
  Configuring libgcc.
  Configuring libc.
  Installing kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) to root...
  Configuring kernel.
  Installing luci (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci_git-19.353.67991-868abc1-1_all.ipk
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libubox_2018-07-25-c83a84af-2_mips_24kc.ipk.
  Installing luci-mod-admin-full (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-mod-admin-full_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-en (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-en_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-base (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-base_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-i18n-firewall-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-firewall-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-app-firewall (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-app-firewall_git-19.353.67991-868abc1-1_all.ipk
  Installing base-files (194.2-r7897-9d401013fc) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/base-files_194.2-r7897-9d401013fc_mips_24kc.ipk.
  Installing libuci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libuci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing busybox (1.28.4-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/busybox_1.28.4-3_mips_24kc.ipk.
  Installing dnsmasq (2.80-1.4) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dnsmasq_2.80-1.4_mips_24kc.ipk.
  Installing dropbear (2017.75-7.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dropbear_2017.75-7.1_mips_24kc.ipk.
  Installing firewall (2018-08-13-1c4d5bcd-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/firewall_2018-08-13-1c4d5bcd-1_mips_24kc.ipk.
  Installing fstools (2019-03-28-ff1ded63-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/fstools_2019-03-28-ff1ded63-5_mips_24kc.ipk.
  Installing ip6tables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/ip6tables_1.6.2-3_mips_24kc.ipk.
  Installing kmod-nf-reject6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-reject6_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt6_4.9.198-1_mips_24kc.ipk
  Installing kmod-ipt-core (4.9.198-1) to root...
  Downloading file:packages/kmod-ipt-core_4.9.198-1_mips_24kc.ipk
  Installing kmod-ip6tables (4.9.198-1) to root...
  Downloading file:packages/kmod-ip6tables_4.9.198-1_mips_24kc.ipk
  Installing libip4tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip4tc_1.6.2-3_mips_24kc.ipk.
  Installing libip6tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip6tc_1.6.2-3_mips_24kc.ipk.
  Installing libxtables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libxtables_1.6.2-3_mips_24kc.ipk.
  Installing iptables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/iptables_1.6.2-3_mips_24kc.ipk.
  Package iptables (1.6.2-3) installed in root is up to date.
  Package kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) installed in root is up to date.
  Installing kmod-ath9k (4.9.198+2017-11-01-10) to root...
  Downloading file:packages/kmod-ath9k_4.9.198%2b2017-11-01-10_mips_24kc.ipk
  Installing libnl-tiny (0.1-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libnl-tiny_0.1-5_mips_24kc.ipk.
  Installing kmod-gpio-button-hotplug (4.9.198-2) to root...
  Downloading file:packages/kmod-gpio-button-hotplug_4.9.198-2_mips_24kc.ipk
  Installing kmod-ledtrig-gpio (4.9.198-1) to root...
  Downloading file:packages/kmod-ledtrig-gpio_4.9.198-1_mips_24kc.ipk
  Package libc (1.1.19-2) installed in root is up to date.
  Package libgcc (7.3.0-2) installed in root is up to date.
  Installing logd (2018-02-14-128bc35f-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/logd_2018-02-14-128bc35f-2_mips_24kc.ipk.
  Installing mtd (23) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/mtd_23_mips_24kc.ipk.
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Installing netifd (2019-01-31-a2aba5c7-2.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/netifd_2019-01-31-a2aba5c7-2.1_mips_24kc.ipk.
  Installing odhcp6c (2018-07-14-67ae6a71-15) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcp6c_2018-07-14-67ae6a71-15_mips_24kc.ipk.
  Installing odhcpd-ipv6only (1.15-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcpd-ipv6only_1.15-3_mips_24kc.ipk.
  Installing opkg (2019-06-14-dcbc142e-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/opkg_2019-06-14-dcbc142e-1_mips_24kc.ipk.
  Installing rbcfg (2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rbcfg_2_mips_24kc.ipk.
  Installing rssileds (0.2-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rssileds_0.2-1_mips_24kc.ipk.
  Installing swconfig (11) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/swconfig_11_mips_24kc.ipk.
  Installing uboot-envtools (2018.03-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uboot-envtools_2018.03-1_mips_24kc.ipk.
  Installing uci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing uclient-fetch (2018-11-24-3ba74ebc-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uclient-fetch_2018-11-24-3ba74ebc-1_mips_24kc.ipk.
  Installing wpad-mini (2018-05-21-62566bc2-8) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/wpad-mini_2018-05-21-62566bc2-8_mips_24kc.ipk.
  Configuring kmod-nf-reject6.
  Configuring uboot-envtools.
  Configuring kmod-ledtrig-gpio.
  Configuring rbcfg.
  Configuring luci-app-firewall.
  Configuring kmod-nf-ipt.
  Configuring libxtables.
  Configuring libip4tc.
  Configuring kmod-nf-ipt6.
  Configuring kmod-ipt-core.
  Configuring kmod-ip6tables.
  Configuring fstools.
  Configuring libip6tc.
  Configuring luci-base.
  Configuring luci-mod-admin-full.
  Configuring kmod-gpio-button-hotplug.
  Configuring luci-i18n-firewall-fr.
  Configuring iptables.
  Configuring ip6tables.
  Configuring luci-i18n-base-en.
  Configuring luci-i18n-base-fr.
  Collected errors:
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package luci.
   * opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   * opkg_install_cmd: Cannot install package base-files.
   * opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   * opkg_install_cmd: Cannot install package busybox.
   * opkg_install_pkg: Package size mismatch: dnsmasq is 99783 bytes, expecting 99775 bytes
   * opkg_install_cmd: Cannot install package dnsmasq.
   * opkg_install_pkg: Package size mismatch: dropbear is 86613 bytes, expecting 86610 bytes
   * opkg_install_cmd: Cannot install package dropbear.
   * opkg_install_pkg: Package size mismatch: firewall is 40776 bytes, expecting 40777 bytes
   * opkg_install_cmd: Cannot install package firewall.
   * opkg_install_pkg: Package size mismatch: libnl-tiny is 12953 bytes, expecting 12948 bytes
   * opkg_install_cmd: Cannot install package kmod-ath9k.
   * opkg_install_pkg: Package size mismatch: logd is 10114 bytes, expecting 10111 bytes
   * opkg_install_cmd: Cannot install package logd.
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package mtd.
   * opkg_install_pkg: Package size mismatch: netifd is 62005 bytes, expecting 62004 bytes
   * opkg_install_cmd: Cannot install package netifd.
   * opkg_install_pkg: Package size mismatch: odhcp6c is 23650 bytes, expecting 23646 bytes
   * opkg_install_cmd: Cannot install package odhcp6c.
   * opkg_install_pkg: Package size mismatch: odhcpd-ipv6only is 28830 bytes, expecting 28845 bytes
   * opkg_install_cmd: Cannot install package odhcpd-ipv6only.
   * opkg_install_pkg: Package size mismatch: opkg is 58890 bytes, expecting 58895 bytes
   * opkg_install_cmd: Cannot install package opkg.
   * opkg_install_pkg: Package size mismatch: rssileds is 4056 bytes, expecting 4059 bytes
   * opkg_install_cmd: Cannot install package rssileds.
   * opkg_install_pkg: Package size mismatch: swconfig is 9478 bytes, expecting 9484 bytes
   * opkg_install_cmd: Cannot install package swconfig.
   * opkg_install_pkg: Package size mismatch: uci is 7267 bytes, expecting 7262 bytes
   * opkg_install_cmd: Cannot install package uci.
   * opkg_install_pkg: Package size mismatch: uclient-fetch is 7489 bytes, expecting 7485 bytes
   * opkg_install_cmd: Cannot install package uclient-fetch.
   * opkg_install_pkg: Package size mismatch: wpad-mini is 258733 bytes, expecting 258725 bytes
   * opkg_install_cmd: Cannot install package wpad-mini.
  make[2]: *** [Makefile:153: package_install] Error 255
  make[1]: *** [Makefile:114: _call_image] Error 2
  make: *** [Makefile:193: image] Error 2
29.01.20202781Base systemBug ReportLowMediumArcher C50 v4 Mac80211 Looses Internet Access after 20’...openwrt-19.07New Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Problem Device:
TP-Link Archer C50 (Canadian) v4 + v4.2

Software version:
openwrt 19.07 r10860, default packages versions.

Steps to reproduce:
Setup wireless like below. I’ve intentionally left encryption set to “none” for both radio’s for quick testing but i’ve tested with WPA2 CCMP encryption with no change in results.

config wifi-device ‘radio0’ option type ‘mac80211’ option channel ‘11’ option hwmode ‘11g’ option path ‘platform/10300000.wmac’ option htmode ‘HT20’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio0’ option device ‘radio0’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

config wifi-device ‘radio1’ option type ‘mac80211’ option hwmode ‘11a’ option path ‘pci0000:00/0000:00:00.0/0000:01:00.0’ option htmode ‘VHT80’ option channel ‘112’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio1’ option device ‘radio1’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

Alternative Settings:

htmode ‘HT40’ No change in results
channel ‘1’, ‘6’, ‘11’ No change in results
disassoc_low_ack ‘0’ No change in results

13.07.201650Base systemBug ReportMediumLowNo image or non-verbose output created if image is too ...TrunkNew Task Description

The target/install target does not produce the *squashfs-factory.bin and *squashfs-sysupgrade.bin binaries if the images are too big to fit the selected flash size.
However, make doesn’t say a word to the user but simply does not produce the files. The user has to either check the mtime of the files if they were created earlier or use

make target/install V=s

to derive what’s wrong.
According to jow on IRC this is just an artifact of no way to bypass silent mode. That might be the common explanation but it is still a bug from my POV.

17.08.201697Base systemBug ReportMediumLowdnsmasq doesn't receive updated dns servers when runnin...TrunkNew Task Description

Bind-mounting /tmp/resolv.conf.auto apparently doesn’t forward inotify events arriving from the kernel when resolv.conf.auto was changed (e.g. upstream DNS servers were received by a DHCP client or pppd). Restarting dnsmasq or running it without ujail solves the issue.

17.01.2017395Base systemBug ReportMediumLowmac80211.sh: detect_mac80211 should check available cha...TrunkNew Task Description

This problem was reported by few Netgear R8000 users and I managed to reproduce it. It’s related to the following code:

		vht_cap=$(iw phy "$dev" info | grep -c 'VHT Capabilities')
		cap_5ghz=$(iw phy "$dev" info | grep -c "Band 2")
		[ "$vht_cap" -gt 0 -a "$cap_5ghz" -gt 0 ] && {
			mode_band="a";
			channel="36"
			htmode="VHT80"
		}

Default htmode

The first problem is that even if hardware supports VHT80 it may be not available for every/any current channel. If channel 36 doesn’t support VHT80, for better user experience, it shouldn’t be set in /etc/config/wireless by default. Example:

root@lede:/# iw phy phy2 info
Wiphy phy2
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports roaming.
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 2:
                Capabilities: 0x1062
                        HT20/HT40
                        Static SM Power Save
                        RX HT20 SGI
                        RX HT40 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-23
                VHT Capabilities (0x0c025820):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        short GI (80 MHz)
                        SU Beamformer
                        SU Beamformee
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Frequencies:
                        * 5170 MHz [34] (disabled)
                        * 5180 MHz [36] (20.0 dBm)
                        * 5190 MHz [38] (disabled)
                        * 5200 MHz [40] (20.0 dBm)
                        * 5210 MHz [42] (disabled)
                        * 5220 MHz [44] (20.0 dBm)
                        * 5230 MHz [46] (disabled)
                        * 5240 MHz [48] (20.0 dBm)
                        * 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
                        * 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
                        * 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
                        * 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
                        * 5500 MHz [100] (20.0 dBm) (no IR, radar detection)
                        * 5520 MHz [104] (20.0 dBm) (no IR, radar detection)
                        * 5540 MHz [108] (20.0 dBm) (no IR, radar detection)
                        * 5560 MHz [112] (20.0 dBm) (no IR, radar detection)
                        * 5580 MHz [116] (20.0 dBm) (no IR, radar detection)
                        * 5600 MHz [120] (20.0 dBm) (no IR, radar detection)
                        * 5620 MHz [124] (20.0 dBm) (no IR, radar detection)
                        * 5640 MHz [128] (20.0 dBm) (no IR, radar detection)
                        * 5660 MHz [132] (20.0 dBm) (no IR, radar detection)
                        * 5680 MHz [136] (20.0 dBm) (no IR, radar detection)
                        * 5700 MHz [140] (20.0 dBm) (no IR, radar detection)
                        * 5720 MHz [144] (disabled)
                        * 5745 MHz [149] (disabled)
                        * 5765 MHz [153] (disabled)
                        * 5785 MHz [157] (disabled)
                        * 5805 MHz [161] (disabled)
                        * 5825 MHz [165] (disabled)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 1
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
                 * #{ AP } <= 4,
                   total <= 4, #channels <= 1, STA/AP BI must match
root@lede:/# iw phy phy2 channels
Band 2:
        * 5170 MHz [34] (disabled)
        * 5180 MHz [36] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+
        * 5190 MHz [38] (disabled)
        * 5200 MHz [40] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40-
        * 5210 MHz [42] (disabled)
        * 5220 MHz [44] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+
        * 5230 MHz [46] (disabled)
        * 5240 MHz [48] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40-
        * 5260 MHz [52] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5280 MHz [56] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5300 MHz [60] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5320 MHz [64] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5500 MHz [100] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5520 MHz [104] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5540 MHz [108] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5560 MHz [112] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5580 MHz [116] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5600 MHz [120] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5620 MHz [124] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5640 MHz [128] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5660 MHz [132] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5680 MHz [136] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5700 MHz [140] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5720 MHz [144] (disabled)
        * 5745 MHz [149] (disabled)
        * 5765 MHz [153] (disabled)
        * 5785 MHz [157] (disabled)
        * 5805 MHz [161] (disabled)
        * 5825 MHz [165] (disabled)

as you can see, VHT80 isn’t support on any currently available channel due to regulatory limits.

Default channel

Picking channel 36 blindly is a bad idea as it may not be available. In case of phy0/radio0 on Netgear R8000 only available channels are 149+ due to hardware/board design (see ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000).

root@lede:/# iw phy phy0 info
Wiphy phy0
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports roaming.
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 2:
                Capabilities: 0x1062
                        HT20/HT40
                        Static SM Power Save
                        RX HT20 SGI
                        RX HT40 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-23
                VHT Capabilities (0x0c025820):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        short GI (80 MHz)
                        SU Beamformer
                        SU Beamformee
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Frequencies:
                        * 5170 MHz [34] (disabled)
                        * 5180 MHz [36] (disabled)
                        * 5190 MHz [38] (disabled)
                        * 5200 MHz [40] (disabled)
                        * 5210 MHz [42] (disabled)
                        * 5220 MHz [44] (disabled)
                        * 5230 MHz [46] (disabled)
                        * 5240 MHz [48] (disabled)
                        * 5260 MHz [52] (disabled)
                        * 5280 MHz [56] (disabled)
                        * 5300 MHz [60] (disabled)
                        * 5320 MHz [64] (disabled)
                        * 5500 MHz [100] (disabled)
                        * 5520 MHz [104] (disabled)
                        * 5540 MHz [108] (disabled)
                        * 5560 MHz [112] (disabled)
                        * 5580 MHz [116] (disabled)
                        * 5600 MHz [120] (disabled)
                        * 5620 MHz [124] (disabled)
                        * 5640 MHz [128] (disabled)
                        * 5660 MHz [132] (disabled)
                        * 5680 MHz [136] (disabled)
                        * 5700 MHz [140] (disabled)
                        * 5720 MHz [144] (disabled)
                        * 5745 MHz [149] (20.0 dBm)
                        * 5765 MHz [153] (20.0 dBm)
                        * 5785 MHz [157] (20.0 dBm)
                        * 5805 MHz [161] (20.0 dBm)
                        * 5825 MHz [165] (20.0 dBm)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 1
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
                 * #{ AP } <= 4,
                   total <= 4, #channels <= 1, STA/AP BI must match
root@lede:/# iw phy phy0 channels
Band 2:
        * 5170 MHz [34] (disabled)
        * 5180 MHz [36] (disabled)
        * 5190 MHz [38] (disabled)
        * 5200 MHz [40] (disabled)
        * 5210 MHz [42] (disabled)
        * 5220 MHz [44] (disabled)
        * 5230 MHz [46] (disabled)
        * 5240 MHz [48] (disabled)
        * 5260 MHz [52] (disabled)
        * 5280 MHz [56] (disabled)
        * 5300 MHz [60] (disabled)
        * 5320 MHz [64] (disabled)
        * 5500 MHz [100] (disabled)
        * 5520 MHz [104] (disabled)
        * 5540 MHz [108] (disabled)
        * 5560 MHz [112] (disabled)
        * 5580 MHz [116] (disabled)
        * 5600 MHz [120] (disabled)
        * 5620 MHz [124] (disabled)
        * 5640 MHz [128] (disabled)
        * 5660 MHz [132] (disabled)
        * 5680 MHz [136] (disabled)
        * 5700 MHz [140] (disabled)
        * 5720 MHz [144] (disabled)
        * 5745 MHz [149] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+ VHT80
        * 5765 MHz [153] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40- VHT80
        * 5785 MHz [157] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+ VHT80
        * 5805 MHz [161] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40- VHT80
        * 5825 MHz [165] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz
05.03.2017598Base systemBug ReportMediumLow842nd doesnt flash successful with factory image using ...lede-17.01New Task Description

Device: 842nd v3.1
LEDE: 17.01

Go into recovery tftp mode by pressing first the WPS/Reset button and now connect the power.
The device enters tftp recovery to download via tftp from 192.168.0.66 file (wr842nv3_tp_recovery.bin)

The device *seems* to accept the flash (sorry, no serial to confirm).
On boot, the device doesn’t show leds nor it accepts any packets on ipv6 on any port (ping ff02::1) or ping to 192.168.1.1.

I guess this happens, because the oem flasher doesn’t flash all blocks of the factory image.

To recover from this state:
- flash via tftp recovery
- enter LEDE rescue/recovery
- ssh root@192.168.1.1
- use sysupgrade image

Task:
- confirm this happens also with trunk
- use serial to get more debug

09.03.2017609Base systemFeature RequestMediumLowprocd: implement runlevel 1TrunkNew Task Description

Sysupgrade currently kills processes with SIGKILL if they don’t shut down within 3 seconds after the SIGTERM signal. Some processes (e.g. domoticz) can take longer than 3 seconds to properly shut down. As this can potentially corrupt the sqlite database, it should be avoided.

While talking about this on IRC, it was suggested we should implement an “init 1” equivalent in procd. Adding this ticket as a reminder.

04.05.2017760Base systemBug ReportVery LowLowMQmaker WiTi / mt76x2e / 2.4 GHz / no minstrel sampling...TrunkNew Task Description

very bad performance for all neighbours on r3900

# cat /sys/kernel/debug/ieee80211/phy1/netdev:wlan1/stations/a0:f3:c1:ce:56:80/rc_stats
              best   ____________rate__________    ________statistics________    _____last____    ______sum-of________
mode guard #  rate  [name   idx airtime  max_tp]  [avg(tp) avg(prob) sd(prob)]  [retry|suc|att]  [#success | #attempts]
CCK    LP  1          1.0M  120   10548     0.0       0.0       0.0      0.0       0     0 0             0   0
CCK    LP  1          2.0M  121    5476     0.0       0.0       0.0      0.0       0     0 0             0   0
CCK    LP  1          5.5M  122    2411     2.4       0.0       0.0      0.0       0     0 0             0   0
CCK    LP  1         11.0M  123    1535     4.8       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  1  ABCDP  MCS0     0    1477     4.8       0.0       0.0      0.0       1     0 0             0   0
HT20  LGI  1         MCS1     1     739     9.7       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  1         MCS2     2     493    14.6       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  1         MCS3     3     369    17.0       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  1         MCS4     4     246    24.4       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  1         MCS5     5     185    29.2       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  1         MCS6     6     164    31.7       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  1         MCS7     7     148    34.1       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  2         MCS8    10     739     9.7       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  2         MCS9    11     369    17.0       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  2         MCS10   12     246    24.4       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  2         MCS11   13     185    29.2       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  2         MCS12   14     123    36.6       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  2         MCS13   15      93    43.9       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  2         MCS14   16      82    46.3       0.0       0.0      0.0       0     0 0             0   0
HT20  LGI  2         MCS15   17      74    48.8       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  1         MCS0    30    1329     4.8       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  1         MCS1    31     665     9.7       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  1         MCS2    32     443    14.6       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  1         MCS3    33     332    19.5       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  1         MCS4    34     222    26.8       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  1         MCS5    35     166    31.7       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  1         MCS6    36     148    34.1       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  1         MCS7    37     133    36.6       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  2         MCS8    40     665     9.7       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  2         MCS9    41     332    19.5       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  2         MCS10   42     222    26.8       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  2         MCS11   43     166    31.7       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  2         MCS12   44     111    39.0       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  2         MCS13   45      83    46.3       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  2         MCS14   46      74    48.8       0.0       0.0      0.0       0     0 0             0   0
HT20  SGI  2         MCS15   47      67    51.2       0.0       0.0      0.0       0     0 0             0   0

Total packet count::    ideal 7625      lookaround 407
Average # of aggregated frames per A-MPDU: 1.0

root@witi7:~ :) arping -I wlan1 10.63.102.195
ARPING to 10.63.102.195 from 10.63.140.195 via wlan1
Unicast reply from 10.63.102.195 [a0:f3:c1:ce:56:80] 491.552ms
Unicast reply from 10.63.102.195 [a0:f3:c1:ce:56:80] 600.276ms
Unicast reply from 10.63.102.195 [a0:f3:c1:ce:56:80] 747.811ms
Unicast reply from 10.63.102.195 [a0:f3:c1:ce:56:80] 748.426ms
Unicast reply from 10.63.102.195 [a0:f3:c1:ce:56:80] 511.603ms
Unicast reply from 10.63.102.195 [a0:f3:c1:ce:56:80] 403.993ms
Unicast reply from 10.63.102.195 [a0:f3:c1:ce:56:80] 601.602ms
Unicast reply from 10.63.102.195 [a0:f3:c1:ce:56:80] 371.090ms

root@witi7:~ :) ping -c1 10.63.102.195
PING 10.63.102.195 (10.63.102.195): 56 data bytes
64 bytes from 10.63.102.195: seq=0 ttl=64 time=2414.528 ms

--- 10.63.102.195 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 2414.528/2414.528/2414.528 ms

root@witi7:~ :) iw dev wlan1 station get a0:f3:c1:ce:56:80
Station a0:f3:c1:ce:56:80 (on wlan1)
        inactive time:  150 ms
        rx bytes:       32573998
        rx packets:     63413
        tx bytes:       1038834
        tx packets:     8318
        tx retries:     133088
        tx failed:      8318
        rx drop misc:   30946
        signal:         -60 [-67, -60] dBm
        signal avg:     -59 [-67, -59] dBm
        tx bitrate:     6.5 MBit/s MCS 0
        rx bitrate:     6.5 MBit/s MCS 0
        authorized:     yes
        authenticated:  yes
        associated:     yes
        preamble:       long
        WMM/WME:        yes
        MFP:            no
        TDLS peer:      no
        DTIM period:    0
        beacon interval:250
        connected time: 8652 seconds

# uci show wireless (2.4ghz)
wireless.radio1=wifi-device
wireless.radio1.type='mac80211'
wireless.radio1.country='US'
wireless.radio1.frag='off'
wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
wireless.radio1.chanbw='20'
wireless.radio1.channel='5'
wireless.radio1.distance='100'
wireless.radio1.beacon_int='250'
wireless.radio1.hwmode='11n'
wireless.radio1.htmode='HT20'
wireless.radio1.txpower='23'

wireless.@wifi-iface[2]=wifi-iface
wireless.@wifi-iface[2].device='radio1'
wireless.@wifi-iface[2].network='wlanadhocRADIO1'
wireless.@wifi-iface[2].mode='adhoc'
wireless.@wifi-iface[2].mcast_rate='6000'
wireless.@wifi-iface[2].macaddr='8c:bc:c0:43:c9:09'
wireless.@wifi-iface[2].bssid='02:ca:ff:ee:ba:be'
wireless.@wifi-iface[2].ssid='ffintern.2GHz'

wireless.@wifi-iface[3]=wifi-iface
wireless.@wifi-iface[3].device='radio1'
wireless.@wifi-iface[3].network='wlanRADIO1'
wireless.@wifi-iface[3].encryption='none'
wireless.@wifi-iface[3].mode='ap'
wireless.@wifi-iface[3].macaddr='8e:bc:c0:43:c9:0a'
wireless.@wifi-iface[3].max_inactivity='10'
wireless.@wifi-iface[3].ssid='weimar.freifunk.net'
wireless.@wifi-iface[3].disassoc_low_ack='1'

17.07.2017911OtherFeature RequestVery LowLowProblem with login into private git reposAllNew Task Description

I am not able to use packages from my private git repos which needs login. The system during the build process don’t ask me for login as before.

Here is the verbose log output:

make[3]: Leaving directory `/home/flowtester/caes/platform/package/base-files'
make[3]: Entering directory `/home/flowtester/caes/platform/package-bumblebee/packages/libdevereader'
mkdir -p /home/flowtester/caes/platform/dl
SHELL= flock /home/flowtester/caes/platform/tmp/.libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860.tar.gz.flock -c '          echo "Checking out files from the git repository..."; mkdir -p /home/flowtester/caes/platform/tmp/dl && cd /home/flowtester/caes/platform/tmp/dl && rm -rf libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 && [ \! -d libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 ] && git clone  https://redmine.develict.com/git/devereader libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 && (cd libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 && git checkout daa94e0fad44a000892570665e6c792fd9cad860 && git submodule update --init --recursive) && echo "Packing checkout..." && export TAR_TIMESTAMP=`cd libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 && git log -1 --format='\''@%ct'\''` && rm -rf libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860/.git &&  tar --numeric-owner --owner=0 --group=0 --sort=name ${TAR_TIMESTAMP:+--mtime="$TAR_TIMESTAMP"} -c libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 |     gzip -nc > /home/flowtester/caes/platform/tmp/dl/libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860.tar.gz && mv /home/flowtester/caes/platform/tmp/dl/libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860.tar.gz /home/flowtester/caes/platform/dl/ && rm -rf libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860;     '
Checking out files from the git repository...
Cloning into 'libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860'...
fatal: Authentication failed for 'https://redmine.develict.com/git/devereader/'
make[3]: *** [/home/flowtester/caes/platform/dl/libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860.tar.gz] Error 128
make[3]: Leaving directory `/home/flowtester/caes/platform/package-bumblebee/packages/libdevereader'
make[2]: *** [package/feeds/bumblebee/libdevereader/compile] Error 2
make[2]: Leaving directory `/home/flowtester/caes/platform'
make[1]: *** [/home/flowtester/caes/platform/staging_dir/target-mipsel_24kc_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory `/home/flowtester/caes/platform'
make: *** [world] Error 2

If I try it manually from cli everythings works but not during the prepare process ....


03.09.2017998PackagesBug ReportLowLowpackages: "make packages/X/check" should print warnings...TrunkNew Task Description

Currently, when running “make check” on a single package, it does not print any warning. V=s is needed to see the warnings. The build system should print the warnings in all cases, because that’s what the user asks for!

To reproduce:

$ make package/nlbwmon/check 
 make[1] package/nlbwmon/check
 make[2] -C feeds/packages/net/nlbwmon check
$ make package/nlbwmon/check V=s
make[1]: Entering directory '/tmp/lede'
make[2]: Entering directory '/tmp/lede/feeds/packages/net/nlbwmon'
WARNING: nlbwmon-2017-08-02-32fc0925.tar.xz is missing, please run make download before re-running this check
make[2]: Leaving directory '/tmp/lede/feeds/packages/net/nlbwmon'
make[1]: Leaving directory '/tmp/lede'

The main target make check (without specifying any package) works fine, because it seems to run in verbose mode by default:

$ make check
make[3]: Entering directory '/tmp/lede/tools/gmp'
make[3]: Leaving directory '/tmp/lede/tools/gmp'
...
make[3]: Entering directory '/tmp/lede/package/network/utils/iwinfo'
WARNING: PKG_MIRROR_HASH is missing, set to 7bd294f50f8ec8c0497c5fbe5527f3ae098814cdfeecf4ccf78a2a8937611664
make[3]: Leaving directory '/tmp/lede/package/network/utils/iwinfo'
...

I tried to fix the issue myself but this is way above my understanding of make.

Showing tasks 51 - 100 of 1140 Page 2 of 23 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing