OpenWrt/LEDE Project

Welcome to the OpenWrt/LEDE Project bug reporting and issue tracking system

Problems to be reported here are for the OpenWrt/LEDE Project targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt/LEDE Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to lede-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeverity  descSummaryReported InStatus
23.01.20192079Base systemBug ReportVery LowCriticalMT7621 - lost RX streamAllUnconfirmed Task Description

Device: TP-LINK RE350 v1
OpenWRT: 18.06-SNAPSHOOT 22.01.2019
Wireless setup:

  config wifi-device 'radio0'
      option type 'mac80211'
      option channel '1'
      option hwmode '11g'
      option path 'pci0000:00/0000:00:00.0/0000:01:00.0'
      option ldpc '1'
      option greenfield '0'
      option diversity '1'
      option htmode 'HT40'
      option country 'PL'
      option log_level '8'
      option disabled '0'
      option legacy_rates '0'
      option noscan '1'
  config wifi-iface
      option device 'radio0'
      option mode 'sta'
      option ssid 'XXX'
      option bssid 'xxx'
      option encryption 'psk2'
      option key 'xxx'
      option disassoc_low_ack '0'
      option network 'wan'
      option disabled '0'
      option wmm '1'
  config wifi-iface
      option device 'radio0'
      option mode 'ap'
      option ssid 'XXX'
      option encryption 'psk2'
      option key 'xxx'
      option disassoc_low_ack '0'
      option network 'lan'
      option disabled '0'
      option wds '1'
      option wmm '1'

Problem and solution:
AP and STA works on Channel 1. STA few seconds after connection to upstream AP losts RX stream.

  Station xx:xx:xx:xx:xx:xx (on wlan0)
      inactive time:  20570 ms
      rx bytes:       222792
      rx packets:     1657
      tx bytes:       1482
      tx packets:     20
      tx retries:     133
      tx failed:      12
      beacon loss:    10
      beacon rx:      756
      rx drop misc:   2
      signal:         -68 [-68, -69] dBm
      signal avg:     -68 [-68, -68] dBm
      beacon signal avg:      188 dBm
      tx bitrate:     43.3 MBit/s MCS 10 short GI
      **rx bitrate:     1.0 MBit/s**
      authorized:     yes
      authenticated:  yes
      associated:     yes
      preamble:       long
      WMM/WME:        yes
      MFP:            no
      TDLS peer:      no
      DTIM period:    2
      beacon interval:100
      short slot time:yes
      connected time: 83 seconds
 


21.01.20192073Base systemBug ReportVery LowCriticalSha1 in firmware-utils/src/sha1.c has TLS or DTLS Vulne...AllUnconfirmed Task Description

Hi,
The sha1 file in openwrt/tools/firmware-utils/src/sha1.c is not fixed and is vulnerable to remote code execution or DoS. The CVE (CVE-2018-0487) and fixed in multiple other repos including ubuntu. (https://people.canonical.com/~ubuntu-security/cve/2018/CVE-2018-0487.html)

01.01.20192040Base systemBug ReportVery LowCriticalgdb 8.2 fails to compile for Raspberry Pi 3B+TrunkUnconfirmed Task Description

- Device problem occurs on
Attempting build for Raspberry Pi 3B+ with gdbserver included

- Software versions of OpenWrt/LEDE release, packages, etc.
commit d3bf5ff9bc7b55b2a3dab93853b33a0cd2c4ca47 (HEAD → master, origin/master, origin/HEAD)
Author: Jonas Gorski jonas.gorski@gmail.com Date: Mon Sep 10 11:42:53 2018 +0200

- Steps to reproduce
(I successfully built and ran it without gdbserver.)
In menuconfig, selected the correct SoC, added Luci, then followed https://openwrt.org/docs/guide-developer/gdb:
“Compiling Tools” - exactly as described.
“Add debugging to a package” - option “Global build settings > Compile packages with debugging info” (whether this is activated or not has no effect on the problem)

gdb compilation for the target fails, see error below.

I reverted 2 last commits to the gdb package, to what it was at this commit:
commit 525b8f06501233414ad6e56fe1134ae82ab28fc2
Author: Rosen Penev rosenp@gmail.com
Date: Wed Jun 6 18:22:26 2018 -0700

using these commands:
cd package/devel
git checkout 525b8f06501 gdb

and the build succeeded. Looks like the updated gdb

.config is attached.


aarch64-openwrt-linux-musl-g++ -x c++ -Os -pipe -mcpu=cortex-a53 -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -iremap/mnt/1TB/ow/openwrt/build_dir/target-aarch64_cortex-a53_musl/gdb-8.2:gdb-8.2 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -I. -I. -I./common -I./config -DLOCALEDIR=”“/usr/share/locale”” -DHAVE_CONFIG_H -I./../include/opcode -I./../opcodes/.. -I./../zlib -I../bfd -I./../bfd -I./../include -I../libdecnumber -I./../libdecnumber -I./gnulib/import -Ibuild-gnulib/import -DTUI=1 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wunused-but-set-variable -Wno-sign-compare -Wno-narrowing -Wno-error=maybe-uninitialized -Wsuggest-override -Wimplicit-fallthrough=3 -Wduplicated-cond -Wformat-nonliteral -c -o aarch64-linux-nat.o -MT aarch64-linux-nat.o -MMD -MP -MF ./.deps/aarch64-linux-nat.Tpo aarch64-linux-nat.c
In file included from nat/aarch64-sve-linux-ptrace.h:23:0,
from aarch64-linux-nat.c:35:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/asm/sigcontext.h:26:8: error: redefinition of ‘struct sigcontext’ struct sigcontext {

In file included from /mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/signal.h:48:0,
from build-gnulib/import/signal.h:52,
from linux-nat.h:23,
from aarch64-linux-nat.c:26:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/bits/signal.h:18:16: note: previous definition of ‘struct sigcontext’ typedef struct sigcontext {

In file included from nat/aarch64-sve-linux-ptrace.h:23:0,
from aarch64-linux-nat.c:35:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/asm/sigcontext.h:63:8: error: redefinition of ‘struct _aarch64_ctx’ struct _aarch64_ctx {

In file included from /mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/signal.h:48:0,
from build-gnulib/import/signal.h:52,
from linux-nat.h:23,
from aarch64-linux-nat.c:26:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/bits/signal.h:29:8: note: previous definition of ‘struct _aarch64_ctx’ struct _aarch64_ctx {

In file included from nat/aarch64-sve-linux-ptrace.h:23:0,
from aarch64-linux-nat.c:35:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/asm/sigcontext.h:70:8: error: redefinition of ‘struct fpsimd_context’ struct fpsimd_context {

In file included from /mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/signal.h:48:0,
from build-gnulib/import/signal.h:52,
from linux-nat.h:23,
from aarch64-linux-nat.c:26:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/bits/signal.h:33:8: note: previous definition of ‘struct fpsimd_context’ struct fpsimd_context {

In file included from nat/aarch64-sve-linux-ptrace.h:23:0,
from aarch64-linux-nat.c:35:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/asm/sigcontext.h:80:8: error: redefinition of ‘struct esr_context’ struct esr_context {

In file included from /mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/signal.h:48:0,
from build-gnulib/import/signal.h:52,
from linux-nat.h:23,
from aarch64-linux-nat.c:26:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/bits/signal.h:39:8: note: previous definition of ‘struct esr_context’ struct esr_context {

In file included from nat/aarch64-sve-linux-ptrace.h:23:0,
from aarch64-linux-nat.c:35:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/asm/sigcontext.h:113:8: error: redefinition of ‘struct extra_context’ struct extra_context {

In file included from /mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/signal.h:48:0,
from build-gnulib/import/signal.h:52,
from linux-nat.h:23,
from aarch64-linux-nat.c:26:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/bits/signal.h:43:8: note: previous definition of ‘struct extra_context’ struct extra_context {

aarch64-linux-nat.c: In function ‘void store_sveregs_to_thread(regcache*)’:
aarch64-linux-nat.c:419:59: error: invalid use of incomplete type ‘struct store_sveregs_to_thread(regcache*)::user_sve_header’ iovec.iov_len = 1)→size;

aarch64-linux-nat.c:419:28: note: forward declaration of ‘struct store_sveregs_to_thread(regcache)::user_sve_header’ iovec.iov_len = 2)→size;

Makefile:1622: recipe for target ‘aarch64-linux-nat.o’ failed

1) struct user_sve_header ) base.get (
2) struct user_sve_header *) base.get (
14.11.20181950KernelBug ReportVery LowCriticalXWAY / BT Home Hub 2B - Wifi Random Disconnects Repeate...AllUnconfirmed Task Description

Very annoying wifi disconnects when connected to WDS-Repeater.
The AP works no disconnects but when connected to repeater random disconnects repeatedly.
Affected firmware release both LEDE 17.X.X and Openwrt 18.X.X

Note: Checked, WDS works fine on Previous Openwrt Releases(BarrierBreaker, ChaosCalmer) on same settings
https://openwrt.org/docs/guide-user/network/wifi/atheroswds

Attaching AP and Repeater Logs:

AP Config:

config wifi-device 'radio0'
	option type 'mac80211'
	option channel '5'
	option hwmode '11ng'
	option path 'pci0000:00/0000:00:0e.0'
	option htmode 'HT20'
	option country 'US'
	option txpower '22'
	option log_level '1'
	option macaddr 'be:b5:1b:b5:70:47'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'MyAP'
	option wds '1'
	option encryption 'psk2+ccmp'
	option key 'password'
	option wmm '1'

Repeater WDS Config:
Network

config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'fdd4:7f11:dd9a::/48'

config interface 'lan'
	option type 'bridge'
	option proto 'dhcp'
	option ifname 'eth1'

config switch
	option name 'switch0'
	option reset '1'
	option enable_vlan '1'

config switch_vlan
	option device 'switch0'
	option vlan '1'
	option vid '1'
	option ports '0 1 2 3 4'

Wireless WDS:

config wifi-device 'radio0'
	option type 'mac80211'
	option channel '5'
	option hwmode '11g'
	option path 'platform/ar934x_wmac'
	option htmode 'HT20'
	option country 'US'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'sta'
	option wds '1'
	option ssid 'MyAP'
	option bssid 'be:b5:1b:b5:70:47'
	option encryption 'psk2+ccmp'
	option key 'password'

config wifi-iface
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'MyAP'
	option encryption 'psk2+ccmp'
	option key 'password'
	option wmm '1'

Repeater WDS Log:

Wed Nov 14 12:26:05 2018 daemon.notice netifd: Network device 'wlan0' link is down
Wed Nov 14 12:26:05 2018 kern.info kernel: [ 5805.077610] br-lan: port 3(wlan0) entered disabled state
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:06 2018 daemon.notice netifd: Network device 'wlan0-1' link is down
Wed Nov 14 12:26:06 2018 kern.info kernel: [ 5806.068825] br-lan: port 2(wlan0-1) entered disabled state
Wed Nov 14 12:26:07 2018 daemon.notice netifd: bridge 'br-lan' link is down
Wed Nov 14 12:26:07 2018 daemon.notice netifd: Interface 'lan' has link connectivity loss
Wed Nov 14 12:26:07 2018 daemon.notice netifd: lan (1163): udhcpc: received SIGTERM
Wed Nov 14 12:26:07 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.220211] wlan0: authenticate with be:b5:1b:b5:70:47
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.243173] wlan0: send auth to be:b5:1b:b5:70:47 (try 1/3)
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.257141] wlan0: authenticated
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.268771] wlan0: associate with be:b5:1b:b5:70:47 (try 1/3)
Wed Nov 14 12:26:09 2018 daemon.notice netifd: Network device 'wlan0' link is up
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.282394] wlan0: RX AssocResp from be:b5:1b:b5:70:47 (capab=0x431 status=0 aid=5)
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.290756] wlan0: associated
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.309766] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.315545] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:09 2018 daemon.notice netifd: bridge 'br-lan' link is up
Wed Nov 14 12:26:09 2018 daemon.notice netifd: Interface 'lan' has link connectivity 
Wed Nov 14 12:26:09 2018 daemon.notice netifd: Interface 'lan' is setting up now
Wed Nov 14 12:26:09 2018 daemon.notice hostapd: wlan0-1: AP-STA-DISCONNECTED 00:00:00:00:00:14
Wed Nov 14 12:26:09 2018 daemon.notice netifd: lan (1293): udhcpc: started, v1.25.1
Wed Nov 14 12:26:09 2018 daemon.notice netifd: lan (1293): udhcpc: sending discover
Wed Nov 14 12:26:09 2018 daemon.notice netifd: lan (1293): udhcpc: sending select for 192.168.1.117
Wed Nov 14 12:26:09 2018 daemon.notice netifd: lan (1293): udhcpc: lease of 192.168.1.117 obtained, lease time 43200
Wed Nov 14 12:26:09 2018 daemon.notice netifd: Interface 'lan' is now up
Wed Nov 14 12:26:10 2018 kern.info kernel: [ 5810.201396] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:10 2018 kern.info kernel: [ 5810.207348] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:10 2018 daemon.notice netifd: Network device 'wlan0-1' link is up
Wed Nov 14 12:26:11 2018 kern.info kernel: [ 5811.308642] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:12 2018 kern.info kernel: [ 5812.198553] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:16 2018 daemon.info hostapd: wlan0-1: STA 00:00:00:00:00:14 IEEE 802.11: authenticated
Wed Nov 14 12:26:16 2018 daemon.info hostapd: wlan0-1: STA 00:00:00:00:00:14 IEEE 802.11: associated (aid 1)
Wed Nov 14 12:26:16 2018 daemon.notice hostapd: wlan0-1: AP-STA-CONNECTED 00:00:00:00:00:14
Wed Nov 14 12:26:16 2018 daemon.info hostapd: wlan0-1: STA 00:00:00:00:00:14 WPA: pairwise key handshake completed (RSN)
Wed Nov 14 12:26:25 2018 daemon.notice netifd: Network device 'wlan0' link is down
Wed Nov 14 12:26:25 2018 kern.info kernel: [ 5825.168505] br-lan: port 3(wlan0) entered disabled state
Wed Nov 14 12:26:25 2018 kern.info kernel: [ 5825.949685] wlan0: authenticate with be:b5:1b:b5:70:47
Wed Nov 14 12:26:25 2018 kern.info kernel: [ 5825.972671] wlan0: send auth to be:b5:1b:b5:70:47 (try 1/3)
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice netifd: Network device 'wlan0-1' link is down
Wed Nov 14 12:26:26 2018 kern.info kernel: [ 5826.168126] br-lan: port 2(wlan0-1) entered disabled state
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 kern.info kernel: [ 5826.788061] wlan0: send auth to be:b5:1b:b5:70:47 (try 2/3)
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 kern.info kernel: [ 5826.988066] wlan0: send auth to be:b5:1b:b5:70:47 (try 3/3)
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.008409] wlan0: authenticated
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.018301] wlan0: associate with be:b5:1b:b5:70:47 (try 1/3)
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.085692] wlan0: RX AssocResp from be:b5:1b:b5:70:47 (capab=0x431 status=0 aid=5)
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.094030] wlan0: associated
Wed Nov 14 12:26:27 2018 daemon.notice netifd: Network device 'wlan0' link is up
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.156807] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.162628] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:27 2018 daemon.notice hostapd: wlan0-1: AP-STA-DISCONNECTED 00:00:00:00:00:14
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.606090] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.612066] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:27 2018 daemon.notice netifd: Network device 'wlan0-1' link is up
Wed Nov 14 12:26:29 2018 kern.info kernel: [ 5829.157978] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:29 2018 kern.info kernel: [ 5829.607947] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:27:02 2018 daemon.notice netifd: Network device 'wlan0' link is down
Wed Nov 14 12:27:02 2018 kern.info kernel: [ 5862.141503] br-lan: port 3(wlan0) entered disabled state
Wed Nov 14 12:27:02 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:27:02 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.517323] ------------[ cut here ]------------
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.522138] WARNING: CPU: 0 PID: 980 at compat-wireless-2017-01-31/net/mac80211/ieee80211_i.h:1011 0x80d84e80 [mac80211@80d80000+0x607a0]()
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.535171] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_coWed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.600905] CPU: 0 PID: 980 Comm: hostapd Not tainted 4.4.153 #0
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] Stack : 803938d8 00000000 00000001 803f0000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  ...
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.644169] Call Trace:[<80071c44>] 0x80071c44
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.648814] [<80071c44>] 0x80071c44
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.652426] [<80081ac8>] 0x80081ac8
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.656035] [<80d84e80>] 0x80d84e80 [mac80211@80d80000+0x607a0]
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.662174] [<80081b80>] 0x80081b80
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.665784] [<80118460>] 0x80118460
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.669414] [<80d84e80>] 0x80d84e80 [mac80211@80d80000+0x607a0]
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.675533] [<80118460>] 0x80118460
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.679174] [<80d9f1cc>] 0x80d9f1cc [mac80211@80d80000+0x607a0]
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.685292] [<80118460>] 0x80118460
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.688933] [<80cda8bc>] 0x80cda8bc [cfg80211@80cc0000+0x36ba0]
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.695047] [<80118460>] 0x80118460
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.698680] [<802a6384>] 0x802a6384
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.702289] [<802a4b94>] 0x802a4b94
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.705911] [<802a60f0>] 0x802a60f0
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.709534] [<802a54d0>] 0x802a54d0
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.713145] [<80400000>] 0x80400000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.716753] [<802a60d8>] 0x802a60d8
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.720376] [<80268dd0>] 0x80268dd0
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.723986] [<802a4d34>] 0x802a4d34
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.727610] [<802682d4>] 0x802682d4
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.731228] [<802a52ac>] 0x802a52ac
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.734829] [<801bd428>] 0x801bd428
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.738447] [<8026cb54>] 0x8026cb54
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.742065] [<8025e448>] 0x8025e448
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.745677] [<8025f860>] 0x8025f860
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.749308] [<8025e448>] 0x8025e448
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.752914] [<802604a4>] 0x802604a4
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.756538] [<80260790>] 0x80260790
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.760162] [<800b2f2c>] 0x800b2f2c
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.763782] [<80062c6c>] 0x80062c6c
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.767401] 
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.768949] ---[ end trace 3926c6523a1013c9 ]---
07.11.20181938Base systemBug ReportVery LowCriticalCONFIG_PKG_ASLR_PIE and CONFIG_USE_MKLIBS are incompati...TrunkUnconfirmed Task Description

I’m building OpenWrt trunk (commit dceee8cc09a54f96dee82a6e95e3e77a6dd7ac13) for Netgear R7800 (though I think, device doesn’t matter here).

It turns out that if both CONFIG_PKG_ASLR_PIE and CONFIG_USE_MKLIBS are turned on, the system renders unusable. In my case, when building with GCC 7, dropbear doesn’t start, and when building with GCC 8, the system doesn’t boot, and the status LED is off.

The culprit is this line: https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=include/rootfs.mk;h=76425c017a8b33340dbcc41cecaf1241352c7dbc;hb=HEAD#l7

      # first find all programs and add them to the mklibs list
      find $(STAGING_DIR_ROOT) -type f -perm /100 -exec \
              file -r -N -F '' {} + | \
              awk ' /executable.*dynamically/ { print $$1 }' > $(TMP_DIR)/mklibs-progs

It should generate the list of executables for mklibs, however, with PIE turned on, most of the executables don’t get into that list. In my config, only fw_printenv gets into the mklibs-progs list. And, because some executables are not on the list, the symbols they need may be stripped off the libraries, rendering these executables unusable.

The reason is that the file command detects PIE executables as shared objects, not as executables. Compare:

  With ASLR off:
  bin/busybox ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-armhf.so.1, with debug_info, not stripped
  With ASLR on:
  bin/busybox ELF 32-bit LSB shared object, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-armhf.so.1, with debug_info, not stripped
  This one single executable displays the same, independently of ASLR state:
  usr/sbin/fw_printenv ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-armhf.so.1, stripped

If CONFIG_PKG_ASLR_PIE=n, all executables are detected properly and get into the mklibs-progs list.

A more proper way should be found to detect executables, as the current one skips PIE executables completely and makes the system unusable, because some of the PIE executables can’t start due to missing symbols in libraries.

I’ve chosen the critical severity, because the system doesn’t work if I set those two config options to y, and this combination isn’t something unusual, because many people would like both increased security and smaller size of the firmware.

11.06.20181586Base systemBug ReportVery LowCriticalDAP-1522 A1 factory to snapshot kernel panic and system...TrunkUnconfirmed Task Description

DAP-1522 A1 stock firmware 1.21 or 1.42 , device page https://openwrt.org/toh/hwdata/d-link/d-link_dap-1522_a1 Flash via GUI or Recovery interface , both the same result/fail.
Since this device is not supported on 17.04.1 https://downloads.lede-project.org/releases/17.01.4/targets/ramips/rt288x/
I try the snapshot from https://downloads.openwrt.org/snapshots/targets/ramips/rt288x/openwrt-ramips-rt288x-dlink_dap-1522-a1-squashfs-factory.bin Checksum ok

Here is the boot log

U-Boot 1.1.3 (Aug 28 2009 - 15:47:01) Build 001--ALPHA_v011

Board: RT2880 DRAM:  32 MB
        twe0 set to <NULL>
        toe0 set to <NULL>
============================================
ASIC -VerB/C (MAC to MAC Mode)
DRAM COMPONENT=256Mbits
DRAM BUS=16BIT
Total memory = 32Mbytes
Date:Aug 28 2009  Time:15:47:01
============================================

Eth0 (10/100-M)



Hit any key to stop autoboot:  0
## Booting image at bc440000 ...
   Image Name:   7zip Linux Kernel
   Created:      1970-01-01   0:00:00 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    -1 Bytes = 4096 MB
   Load Address: 8a000000
   Entry Point:  8a000000
   Uncompressing Kernel Image with LZMA ...
OK

Starting kernel ...

[    0.000000] Linux version 4.14.48 (buildbot@slashdirt-02) (gcc version 7.3.0                                                                 (OpenWrt GCC 7.3.0
r7172-f60301d)) #0 Sat Jun 9 20:39:17 2018
[    0.000000] SoC Type: Ralink RT2880 id:2 rev:0
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001906c (MIPS 4KEc)
[    0.000000] MIPS: machine is D-Link DAP-1522 A1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 08000000 (usable)
[    0.000000] Wasting 1048576 bytes for tracking 32768 unused pages
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 byt                                                                es
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000009ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000009ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000009ffffff]
[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x47c with                                                                 crng_init=0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 40640
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs                                                                2
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 25248K/163840K available (3518K kernel code, 174K rwdata,                                                                 844K rodata, 1216K
init, 214K bss, 138592K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 256
[    0.000000] Failed to request intc memory
[    0.000000] Kernel panic - not syncing: Failed to request resources for ralin                                                                k,rt2880-sysc
[    0.000000] Rebooting in 1 seconds..
[    0.000000] Reboot failed -- System halted

Regards,


16.05.20181550Base systemBug ReportVery LowCriticalUnable to handle kernel paging request causes router to...TrunkUnconfirmed Task Description

- Device problem occurs on
Xiaomi mi router 3G (R3G)

- Software versions of OpenWrt/LEDE release, packages, etc.
Latest trunk (r6893-bfbdeeb) custom build

- Steps to reproduce
Did not notice there is a pattern here.

- The issue
The kernel crash causes the router to reboot. Here are two traces I was able to catch

May 13 07:24:52 router kernel: [82948.434471] CPU 1 Unable to handle kernel paging request at virtual address 07407800, epc == 80136a70, ra == 8013694c
May 13 07:24:52 router kernel: [82948.445103] Oops[#1]:
May 13 07:24:52 router kernel: [82948.447387] CPU: 1 PID: 1977 Comm: kworker/u8:1 Not tainted 4.14.37 #0
May 13 07:24:52 router kernel: [82948.453909] Workqueue: writeback wb_workfn (flush-8:0)
May 13 07:24:52 router kernel: [82948.459046] task: 8ff3ddc0 task.stack: 8dd62000
May 13 07:24:52 router kernel: [82948.463565] $ 0 : 00000000 00000001 00000000 812286b0
May 13 07:24:52 router kernel: [82948.468800] $ 4 : 805aa44c 00000001 00000001 07407800
May 13 07:24:52 router kernel: [82948.474019] $ 8 : 000facb3 000facb2 00000002 00064000
May 13 07:24:52 router kernel: [82948.479248] $12 : 00000009 0004001a fffeffff 00001000
May 13 07:24:52 router kernel: [82948.484473] $16 : 8fc02c00 000001b8 01011200 8022b6f0
May 13 07:24:52 router kernel: [82948.489695] $20 : 8ebb0000 8006a664 8e56d81c 01400000
May 13 07:24:52 router kernel: [82948.494913] $24 : 81196320 00000000
May 13 07:24:52 router kernel: [82948.500133] $28 : 8dd62000 8dd63950 8fd77d40 8013694c
May 13 07:24:52 router kernel: [82948.505351] Hi : 00000000
May 13 07:24:52 router kernel: [82948.508214] Lo : 00840480
May 13 07:24:52 router kernel: [82948.511113] epc : 80136a70 kmalloc+0x1f8/0x2ec
May 13 07:24:52 router kernel: [82948.515887] ra : 8013694c
kmalloc+0xd4/0x2ec
May 13 07:24:52 router kernel: [82948.520568] Status: 11007c03#011KERNEL EXL IE May 13 07:24:52 router kernel: [82948.524750] Cause : 40800008 (ExcCode 02)
May 13 07:24:52 router kernel: [82948.528740] BadVA : 07407800
May 13 07:24:52 router kernel: [82948.531605] PrId : 0001992f (MIPS 1004Kc)
May 13 07:24:52 router kernel: [82948.535679] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 cdc_ether xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack libcrc32c iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport
May 13 07:24:52 router kernel: [82948.606444] ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables vfat fat nls_utf8 nls_iso8859_1 nls_cp437 usb_storage leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii crc32c_generic
May 13 07:24:52 router kernel: [82948.655996] Process kworker/u8:1 (pid: 1977, threadinfo=8dd62000, task=8ff3ddc0, tls=00000000)
May 13 07:24:52 router kernel: [82948.664578] Stack : 01011200 00400000 8006a664 8f0c719c 00000001 00000000 8fd33300 01011200
May 13 07:24:52 router kernel: [82948.672925] 8fe74850 01011200 00000001 00400000 8006a664 8022b6f0 8fe74850 01011200
May 13 07:24:52 router kernel: [82948.681267] 01411200 8fdf9e00 01011200 01411200 8e56d800 800ecd30 8fe74850 01011200
May 13 07:24:52 router kernel: [82948.689609] 01411200 8fdf9d00 01400000 00400000 8006a664 800ecd30 00060000 00000001
May 13 07:24:52 router kernel: [82948.697952] 8dd63a48 8fe74850 00000000 8fe74850 00000001 8fe74850 00000000 8fe74878
May 13 07:24:52 router kernel: [82948.706292] ...
May 13 07:24:52 router kernel: [82948.708733] Call Trace:
May 13 07:24:52 router kernel: [82948.711201] [<80136a70>] __kmalloc+0x1f8/0x2ec
May 13 07:24:52 router kernel: [82948.715643] [<8022b6f0>] alloc_request_size+0x2c/0x7c
May 13 07:24:52 router kernel: [82948.720708] [<800ecd30>] mempool_alloc+0x6c/0×178 May 13 07:24:52 router kernel: [82948.725402] [<8022cf88>] get_request+0×360/0x76c
May 13 07:24:52 router kernel: [82948.730005] [<802303c4>] blk_queue_bio+0x1cc/0×430 May 13 07:24:52 router kernel: [82948.734781] [<8022e3cc>] generic_make_request+0xd8/0×288 May 13 07:24:52 router kernel: [82948.740078] [<8022e6a0>] submit_bio+0×124/0×164 May 13 07:24:52 router kernel: [82948.744663] [<8f1c3014>] ext4_io_submit+0×50/0×64 [ext4]
May 13 07:24:52 router kernel: [82948.749989] [<8f1a5994>] ext4_mark_inode_dirty+0xeac/0×1368 [ext4]
May 13 07:24:52 router kernel: [82948.756166] Code: 32428000 8e020014 00e23821 <8ce20000> 1000002c cc400000 1280ffbc 00000000 8e060010
May 13 07:24:52 router kernel: [82948.765910]
May 13 07:24:52 router kernel: [82948.767638] —[ end trace e8f9893fb33e6a26 ]—

and the second case

May 15 15:52:16 router kernel: [67618.480256] CPU 0 Unable to handle kernel paging request at virtual address 07402800, epc == 80136784, ra == 800ecd30
May 15 15:52:16 router kernel: [67618.490997] Oops[#1]:
May 15 15:52:16 router kernel: [67618.493275] CPU: 0 PID: 14159 Comm: kworker/u8:1 Not tainted 4.14.37 #0
May 15 15:52:16 router kernel: [67618.499875] Workqueue: writeback wb_workfn (flush-8:0)
May 15 15:52:16 router kernel: [67618.504997] task: 8c3276c0 task.stack: 8b656000
May 15 15:52:16 router kernel: [67618.509500] $ 0 : 00000000 00000001 00000000 8121a6c0
May 15 15:52:16 router kernel: [67618.514709] $ 4 : 805aa44c 00000001 00000001 07402800
May 15 15:52:16 router kernel: [67618.519918] $ 8 : 00005ddf 00005dde 8fb9b6a0 00000120
May 15 15:52:16 router kernel: [67618.525127] $12 : 8000001f 00000010 00000124 00000001
May 15 15:52:16 router kernel: [67618.530336] $16 : 8fd4a200 01011200 800ecd30 8b0e0000
May 15 15:52:16 router kernel: [67618.535545] $20 : 00400000 8006a664 8fd4981c 80660000
May 15 15:52:16 router kernel: [67618.540754] $24 : ffffffe0 ffff0000
May 15 15:52:16 router kernel: [67618.545963] $28 : 8b656000 8b657970 8f1c2c24 800ecd30
May 15 15:52:16 router kernel: [67618.551174] Hi : 00000000
May 15 15:52:16 router kernel: [67618.554035] Lo : 008402f0
May 15 15:52:16 router kernel: [67618.556924] epc : 80136784 kmem_cache_alloc+0x13c/0×230 May 15 15:52:16 router kernel: [67618.562323] ra : 800ecd30 mempool_alloc+0x6c/0×178 May 15 15:52:16 router kernel: [67618.567345] Status: 11008403#011KERNEL EXL IE May 15 15:52:16 router kernel: [67618.571515] Cause : 40800008 (ExcCode 02)
May 15 15:52:16 router kernel: [67618.575499] BadVA : 07402800
May 15 15:52:16 router kernel: [67618.578361] PrId : 0001992f (MIPS 1004Kc)
May 15 15:52:16 router kernel: [67618.582431] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 cdc_ether xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack libcrc32c iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport
May 15 15:52:16 router kernel: [67618.653177] ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables vfat fat nls_utf8 nls_iso8859_1 nls_cp437 usb_storage leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii crc32c_generic
May 15 15:52:16 router kernel: [67618.702675] Process kworker/u8:1 (pid: 14159, threadinfo=8b656000, task=8c3276c0, tls=00000000)
May 15 15:52:16 router kernel: [67618.711326] Stack : 8e648b20 8f147e00 8e648b20 01011200 00000001 8022b710 00000002 01011200
May 15 15:52:16 router kernel: [67618.719658] 01411200 8fd49800 01400000 00400000 8006a664 800ecd30 00000001 01011200
May 15 15:52:16 router kernel: [67618.727990] 01411200 8fd49700 01400000 00400000 8006a664 800ecd30 8e330030 8c499000
May 15 15:52:16 router kernel: [67618.736322] 8fd9f000 8b657a2c 01400000 8fd49800 01400000 01400000 8e47fa00 8d44d8f8
May 15 15:52:16 router kernel: [67618.744655] 80660000 80225974 8fd49600 00000100 01400000 8d48d7c0 8e47fa00 8fd49600
May 15 15:52:16 router kernel: [67618.752989] ...
May 15 15:52:16 router kernel: [67618.755425] Call Trace:
May 15 15:52:16 router kernel: [67618.757859] [<80136784>] kmem_cache_alloc+0x13c/0×230 May 15 15:52:16 router kernel: [67618.762897] [<800ecd30>] mempool_alloc+0x6c/0×178 May 15 15:52:16 router kernel: [67618.767596] [<80225974>] bvec_alloc+0xdc/0×154 May 15 15:52:16 router kernel: [67618.772020] [<80225b44>] bio_alloc_bioset+0×158/0×250 May 15 15:52:16 router kernel: [67618.777111] [<8f1c3358>] ext4_bio_write_page+0×320/0x5c4 [ext4]
May 15 15:52:16 router kernel: [67618.783028] [<8f19e3f4>] ext4_convert_inline_data+0×874/0x21a8 [ext4]
May 15 15:52:16 router kernel: [67618.789461] [<8f19e860>] ext4_convert_inline_data+0xce0/0x21a8 [ext4]
May 15 15:52:16 router kernel: [67618.795881] Code: 32228000 8e020014 00e23821 <8ce20000> 1000002d cc400000 1260ffbc 00000000 8e060010
May 15 15:52:16 router kernel: [67618.805607]
May 15 15:52:16 router kernel: [67618.807332] —[ end trace 3b32ff5399a1bc64 ]—


11.05.20181543PackagesBuild FailureVery LowCriticalMany packages in snapshot failing on one build, ok on n...TrunkUnconfirmed Task Description

Snapshot/Packages
Occurs on all architectures apparently at random with faillogs.
After next build some that failed will be ok and some that previously built will fail.
eg submit a PR on https://github.com/openwrt/packages Travis shows fail on dependencies. After next automated build, Travis errors will be different, or if lucky will pass, only to fail again after the next build.
It seems the build system is chasing its tail somehow.

02.04.20181467KernelBug ReportVery LowCriticalieee80211_tx_status: headroom too smallTrunkUnconfirmed Task Description

Latest LEDE on Gateworks Newport GW6300 (octeontx) with Compex WLE900VX ath10k radio. Using 4.14.13 mainline OpenWrt kernel

The syslog is getting spammed with “headroom too small” errors when a monitor wireless interface exists and a station gets connected:

Thu Jan  1 00:52:00 1970 kern.err kernel: [  157.740108] ieee80211_tx_status: headroom too small
Thu Jan  1 00:52:01 1970 kern.err kernel: [  158.764099] ieee80211_tx_status: headroom too small
Thu Jan  1 00:52:02 1970 kern.err kernel: [  159.788129] ieee80211_tx_status: headroom too small

These errors are shown using ath10k and ath10k-ct driver versions (currently using ath10k-ct)

Steps to reproduce:

  1. Create a new monitor wireless interface
    iw phy phy0 interface add mon0 type monitor
    ip l set dev mon0 up
  2. Connect a client to the access point configured radio

Full logread info attached separately

09.03.20181418Base systemBug ReportVery LowCriticalDHCP not discovering certain devices on radio1 (2.4ghz ...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

  Linksys 3200ACM

- Software versions of OpenWrt/LEDE release, packages, etc.

   OpenWrt SNAPSHOT r6365-45fdb12 / LuCI Master (git-18.061.42275-852ec6e)
   Additional Packages:
   openssh-sftp-server    7.6p1-1
   nginx                  1.12.2-1

- Steps to reproduce

   Embedded platform such ESP8266, Wireless Cameras are unable to connect 
   to 2.4Ghz radio1 on 3200ACM with WPA2-CCMP.
   DHCP does not seem to discover these devices although radio1 (mwlwifi) successfully
   authenticates the devices.
  Clients: 4 x ESP8266 (SonOff Switches, FluxLED, etc.), Unbranded Wireless Camera
  1. DHCP Configuration
    config dnsmasq
        option domainneeded '1'
        option localise_queries '1'
        option rebind_protection '1'
        option rebind_localhost '1'
        option local '/lan/'
        option domain 'lan'
        option expandhosts '1'
        option authoritative '1'
        option readethers '1'
        option leasefile '/tmp/dhcp.leases'
        option resolvfile '/tmp/resolv.conf.auto'
        option nonwildcard '1'
        option localservice '1'

    config dhcp 'lan'
        option interface 'lan'
        option start '100'
        option limit '150'
        option leasetime '12h'
        list dhcp_option '6,8.8.8.8,8.8.4.4'

    config dhcp 'wan'
        option interface 'wan'
        option ignore '1'

    config odhcpd 'odhcpd'
        option maindhcp '0'
        option leasefile '/tmp/hosts/odhcpd'
        option leasetrigger '/usr/sbin/odhcpd-update'
        option loglevel '4'

    config host
        option name 'VelopNode1'
        option dns '1'
        option mac '58:ef:xx:xx:xx:xx'
        option ip '192.168.1.151'
        option leasetime 'infinite'

    config host
        option name 'Hikam-0505'
        option dns '1'
        option mac '88:83:5d:xx:xx:xx'
        option ip '192.168.1.200'
        option leasetime 'infinite'

    config host
        option name 'ESP_C0F513'
        option dns '1'
        option mac 'dc:4f:22:xx:xx:xx'
        option ip '192.168.1.235'
        option leasetime 'infinite'
  1. 2.4Ghz radio1 configuration:
    wireless.radio1=wifi-device
    wireless.radio1.type='mac80211'
    wireless.radio1.hwmode='11g'
    wireless.radio1.path='soc/soc:pcie/pci0000:00/0000:00:02.0/0000:02:00.0'
    wireless.radio1.country='US'
    wireless.radio1.channel='11'
    wireless.radio1.htmode='HT20'
    wireless.radio1.legacy_rates='1'
    wireless.radio1.txpower='30'
    root@openwrt:~# uci show wireless.default_radio1
    wireless.default_radio1=wifi-iface
    wireless.default_radio1.device='radio1'
    wireless.default_radio1.network='lan'
    wireless.default_radio1.ssid='SSID'
    wireless.default_radio1.key='PASSWORD'
    wireless.default_radio1.mode='ap'
    wireless.default_radio1.encryption='psk2'

- Logs:

    Sun Mar  4 04:07:41 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:07:41 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:07:50 2018 authpriv.info dropbear[3371]: Child connection from 192.168.1.151:57119
    Sun Mar  4 04:08:07 2018 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:08:07 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: disassociated
    Sun Mar  4 04:08:07 2018 kern.debug kernel: [  105.684705] ieee80211 phy1: staid 3 deleted
    Sun Mar  4 04:08:08 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
    Sun Mar  4 04:08:10 2018 kern.debug kernel: [  107.923936] ieee80211 phy1: staid 2 deleted
    Sun Mar  4 04:08:10 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 2)
    Sun Mar  4 04:08:10 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:08:10 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:08:13 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 3)
    Sun Mar  4 04:08:13 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:08:13 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:08:26 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:08:26 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:08:26 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:08:26 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:08:44 2018 kern.debug kernel: [  141.932637] ieee80211 phy1: staid 2 deleted
    Sun Mar  4 04:08:44 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 2)
    Sun Mar  4 04:08:44 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:08:44 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:08:44 2018 kern.debug kernel: [  142.629431] ieee80211 phy1: staid 3 deleted
    Sun Mar  4 04:08:48 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 3)
    Sun Mar  4 04:08:48 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:08:48 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:09:22 2018 kern.debug kernel: [  180.723186] ieee80211 phy1: staid 3 deleted
    Sun Mar  4 04:09:22 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 3)
    Sun Mar  4 04:09:23 2018 kern.debug kernel: [  181.044324] ieee80211 phy1: staid 2 deleted
    Sun Mar  4 04:09:23 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 2)
    Sun Mar  4 04:09:23 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:09:23 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:09:26 2018 kern.debug kernel: [  184.838938] ieee80211 phy1: staid 3 deleted
    Sun Mar  4 04:09:26 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 3)
    Sun Mar  4 04:09:28 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:09:28 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:09:34 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:09:34 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:09:34 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:09:34 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:09:34 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:09:34 2018 kern.debug kernel: [  191.989466] ieee80211 phy1: staid 3 deleted
    Sun Mar  4 04:09:34 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:10:06 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 3)
    Sun Mar  4 04:10:06 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:10:06 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:10:07 2018 kern.debug kernel: [  225.251038] ieee80211 phy1: staid 2 deleted
    Sun Mar  4 04:10:07 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 2)
    Sun Mar  4 04:10:07 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:10:07 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)

Note: These clients are able to join my alternative access point (Velop Nodes) on same frequency and encryption. They are also

  able to join on factory image(FW_WRT3200ACM_1.0.6.186168_prod) radio1 access point and as well as radio2 in openwrt stipulated build.

More info: https://github.com/kaloz/mwlwifi/issues/278

01.02.20181320KernelBug ReportVery LowCriticalcritical crash and restartTrunkUnconfirmed Task Description

There is a random crash all network stop and the router restart .

I’m using last dev build .

Linksys WRT1900ACS

OpenWrt SNAPSHOT r5985-33e8f7e / LuCI Master (git-18.030.59690-47d1eaa)

Kernel 4.9.77

root@OpenWrt:~# cat /sys/kernel/debug/crashlog
Time: 1517518692.641321
Modules:        pppoe@bf1a6000+1e77     ppp_async@bf1a1000+1911 pppox@bf19d000+567      ppp_generic@bf193000+5218       iptable_nat@bf18a000+451        ipt_REJECT@bf186000+3ea ipt_MASQUERADE@bf182000+332     xt_time@bf17e000+6a6    xt_tcpudp@bf17a000+758       xt_state@bf176000+349   xt_nat@bf172000+59d     xt_multiport@bf16e000+554       xt_mark@bf16a000+320    xt_mac@bf166000+2c7     xt_limit@bf162000+48d   xt_conntrack@bf15e000+958       xt_comment@bf15a000+24b xt_TCPMSS@bf156000+a68       xt_REDIRECT@bf152000+375        xt_LOG@bf14e000+3c3     xt_CT@bf14a000+b55      slhc@bf146000+fd2       nf_reject_ipv4@bf142000+803     nf_nat_redirect@bf13e000+3db    nf_nat_masquerade_ipv4@bf13a000+60d     nf_conntrack_ipv4@bf135000+17e5      nf_nat_ipv4@bf131000+f1e        nf_nat@bf12b000+24c0    nf_log_ipv4@bf127000+c36        nf_defrag_ipv4@bf123000+3bc     nf_conntrack_rtcache@bf11f000+a92       nf_conntrack@bf10b000+e773      iptable_mangle@bf107000+3fc  iptable_filter@bf103000+37c     ip_tables@bf0fd000+2817 crc_ccitt@bf0f9000+42b  mwlwifi@bf0d6000+1b6d5  mac80211@bf068000+5f891 cfg80211@bf02e000+311b5 compat@bf029000+12f5    ip6t_REJECT@bf025000+3ec        nf_reject_ipv6@bf021000+908  nf_log_ipv6@bf01d000+cf7        nf_log_common@bf019000+98f      ip6table_mangle@bf015000+4be    ip6table_filter@bf011000+33e    ip6_tables@bf00b000+2715        x_tables@bf005000+2aac  gpio_button_hotplug@bf000000+1784
<7>[   17.893444] ieee80211 phy0: change: 0x40
<7>[   17.911298] ieee80211 phy1: change: 0x40
<7>[   18.111289] ieee80211 phy0: change: 0x40
<7>[   18.121292] ieee80211 phy1: change: 0x40
<7>[   18.321297] ieee80211 phy1: change: 0x40
<7>[   18.331297] ieee80211 phy0: change: 0x40
<7>[   18.521292] ieee80211 phy1: change: 0x40
<7>[   18.551290] ieee80211 phy0: change: 0x40
<7>[   18.721288] ieee80211 phy1: change: 0x40
<7>[   18.771289] ieee80211 phy0: change: 0x40
<7>[   18.931296] ieee80211 phy1: change: 0x40
<7>[   18.991298] ieee80211 phy0: change: 0x40
<7>[   19.020305] ieee80211 phy1: change: 0x100
<7>[   19.029330] ieee80211 phy1: change: 0x100
<7>[   19.038371] ieee80211 phy1: change: 0x40
<7>[   19.211298] ieee80211 phy0: change: 0x40
<7>[   19.241292] ieee80211 phy1: change: 0x40
<7>[   19.431290] ieee80211 phy0: change: 0x40
<7>[   19.441292] ieee80211 phy1: change: 0x40
<7>[   19.641290] ieee80211 phy1: change: 0x40
<7>[   19.651294] ieee80211 phy0: change: 0x60
<7>[   19.851295] ieee80211 phy1: change: 0x40
<7>[   19.871292] ieee80211 phy0: change: 0x40
<7>[   20.051291] ieee80211 phy1: change: 0x40
<7>[   20.091295] ieee80211 phy0: change: 0x40
<7>[   20.271295] ieee80211 phy1: change: 0x40
<7>[   20.311290] ieee80211 phy0: change: 0x40
<7>[   20.471289] ieee80211 phy1: change: 0x40
<7>[   20.531292] ieee80211 phy0: change: 0x40
<7>[   20.681288] ieee80211 phy1: change: 0x40
<7>[   20.751289] ieee80211 phy0: change: 0x40
<7>[   20.881292] ieee80211 phy1: change: 0x40
<7>[   20.971288] ieee80211 phy0: change: 0x40
<7>[   21.081288] ieee80211 phy1: change: 0x40
<7>[   21.191289] ieee80211 phy0: change: 0x40
<7>[   21.291292] ieee80211 phy1: change: 0x40
<7>[   21.411291] ieee80211 phy0: change: 0x40
<7>[   21.491290] ieee80211 phy1: change: 0x40
<7>[   21.631288] ieee80211 phy0: change: 0x40
<7>[   21.691293] ieee80211 phy1: change: 0x40
<7>[   21.780306] ieee80211 phy1: change: 0x100
<7>[   21.789330] ieee80211 phy1: change: 0x100
<7>[   21.798374] ieee80211 phy1: change: 0x40
<7>[   21.851290] ieee80211 phy0: change: 0x40
<7>[   22.001288] ieee80211 phy1: change: 0x40
<7>[   22.071295] ieee80211 phy0: change: 0x60
<7>[   22.175310] ieee80211 phy0: change: 0x100
<7>[   22.184332] ieee80211 phy0: change: 0x100
<7>[   22.193444] ieee80211 phy0: change: 0x40
<7>[   22.201309] ieee80211 phy1: change: 0x40
<7>[   22.411296] ieee80211 phy1: change: 0x40
<7>[   22.411298] ieee80211 phy0: change: 0x40
<7>[   22.611290] ieee80211 phy1: change: 0x40
<7>[   22.631293] ieee80211 phy0: change: 0x40
<7>[   22.811293] ieee80211 phy1: change: 0x40
<7>[   22.851290] ieee80211 phy0: change: 0x40
<7>[   23.011290] ieee80211 phy1: change: 0x40
<7>[   23.081291] ieee80211 phy0: change: 0x40
<7>[   23.221291] ieee80211 phy1: change: 0x40
<7>[   23.301289] ieee80211 phy0: change: 0x40
<7>[   23.421287] ieee80211 phy1: change: 0x40
<7>[   23.531289] ieee80211 phy0: change: 0x40
<7>[   23.621289] ieee80211 phy1: change: 0x40
<7>[   23.751294] ieee80211 phy0: change: 0x40
<7>[   23.821289] ieee80211 phy1: change: 0x40
<7>[   23.971291] ieee80211 phy0: change: 0x60
<7>[   24.031292] ieee80211 phy1: change: 0x40
<7>[   24.201295] ieee80211 phy0: change: 0x40
<7>[   24.231289] ieee80211 phy1: change: 0x40
<7>[   24.421288] ieee80211 phy0: change: 0x40
<7>[   24.431294] ieee80211 phy1: change: 0x40
<7>[   24.520307] ieee80211 phy1: change: 0x100
<7>[   24.529329] ieee80211 phy1: change: 0x100
<7>[   24.538373] ieee80211 phy1: change: 0x40
<7>[   24.641294] ieee80211 phy0: change: 0x40
<7>[   24.741289] ieee80211 phy1: change: 0x40
<7>[   24.861288] ieee80211 phy0: change: 0x40
<7>[   24.951295] ieee80211 phy1: change: 0x40
<7>[   25.091294] ieee80211 phy0: change: 0x40
<7>[   25.151291] ieee80211 phy1: change: 0x40
<7>[   25.311289] ieee80211 phy0: change: 0x40
<7>[   25.351293] ieee80211 phy1: change: 0x40
<7>[   25.541292] ieee80211 phy0: change: 0x40
<7>[   25.551310] ieee80211 phy1: change: 0x40
<7>[   25.751295] ieee80211 phy1: change: 0x40
<7>[   25.761310] ieee80211 phy0: change: 0x40
<7>[   25.951289] ieee80211 phy1: change: 0x40
<7>[   25.991289] ieee80211 phy0: change: 0x40
<7>[   26.151288] ieee80211 phy1: change: 0x40
<7>[   26.211288] ieee80211 phy0: change: 0x40
<7>[   26.351289] ieee80211 phy1: change: 0x40
<7>[   26.431321] ieee80211 phy0: change: 0x60
<7>[   26.537389] ieee80211 phy0: change: 0x100
<7>[   26.546386] ieee80211 phy0: change: 0x100
<7>[   26.555537] ieee80211 phy0: change: 0x40
<7>[   26.561381] ieee80211 phy1: change: 0x40
<7>[   26.791303] ieee80211 phy1: change: 0x40
<7>[   26.801338] ieee80211 phy0: change: 0x40
<7>[   26.991293] ieee80211 phy1: change: 0x40
<7>[   27.021299] ieee80211 phy0: change: 0x40
<7>[   27.191295] ieee80211 phy1: change: 0x40
<7>[   27.241292] ieee80211 phy0: change: 0x40
<7>[   27.279318] ieee80211 phy1: change: 0x100
<7>[   27.288340] ieee80211 phy1: change: 0x100
<7>[   27.297430] ieee80211 phy1: change: 0x40
<7>[   27.461292] ieee80211 phy0: change: 0x40
<7>[   27.501295] ieee80211 phy1: change: 0x40
<7>[   27.681296] ieee80211 phy0: change: 0x40
<7>[   27.701297] ieee80211 phy1: change: 0x40
<7>[   27.891302] ieee80211 phy0: change: 0x40
<7>[   27.911294] ieee80211 phy1: change: 0x40
<7>[   28.101301] ieee80211 phy0: change: 0x40
<7>[   28.111316] ieee80211 phy1: change: 0x40
<7>[   28.311293] ieee80211 phy1: change: 0x40
<7>[   28.331291] ieee80211 phy0: change: 0x60
<7>[   28.511289] ieee80211 phy1: change: 0x40
<7>[   28.551289] ieee80211 phy0: change: 0x40
<7>[   28.721289] ieee80211 phy1: change: 0x40
<7>[   28.771298] ieee80211 phy0: change: 0x40
<7>[   28.921289] ieee80211 phy1: change: 0x40
<7>[   29.001293] ieee80211 phy0: change: 0x40
<7>[   29.131293] ieee80211 phy1: change: 0x40
<7>[   29.231288] ieee80211 phy0: change: 0x40
<7>[   29.331289] ieee80211 phy1: change: 0x40
<7>[   29.451296] ieee80211 phy0: change: 0x40
<7>[   29.531293] ieee80211 phy1: change: 0x40
<7>[   29.671292] ieee80211 phy0: change: 0x40
<7>[   29.731297] ieee80211 phy1: change: 0x40
<7>[   29.901288] ieee80211 phy0: change: 0x40
<7>[   29.931292] ieee80211 phy1: change: 0x40
<7>[   30.019319] ieee80211 phy1: change: 0x100
<7>[   30.082758] ieee80211 phy1: change: 0x100
<7>[   30.091295] ieee80211 phy1: change: 0x42
<7>[   30.121296] ieee80211 phy0: change: 0x40
<6>[   30.244344] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
<6>[   30.250795] br-lan: port 2(wlan1) entered blocking state
<6>[   30.256146] br-lan: port 2(wlan1) entered forwarding state
<7>[   30.341319] ieee80211 phy0: change: 0x40
<7>[   30.561298] ieee80211 phy0: change: 0x40
<7>[   30.781295] ieee80211 phy0: change: 0x60
<7>[   30.885313] ieee80211 phy0: change: 0x100
<7>[   30.894341] ieee80211 phy0: change: 0x100
<7>[   30.903413] ieee80211 phy0: change: 0x40
<7>[   31.121301] ieee80211 phy0: change: 0x40
<7>[   31.341291] ieee80211 phy0: change: 0x40
<7>[   31.561292] ieee80211 phy0: change: 0x40
<7>[   31.781291] ieee80211 phy0: change: 0x40
<7>[   32.001301] ieee80211 phy0: change: 0x40
<7>[   32.221294] ieee80211 phy0: change: 0x40
<7>[   32.441293] ieee80211 phy0: change: 0x40
<7>[   32.661293] ieee80211 phy0: change: 0x60
<7>[   32.881294] ieee80211 phy0: change: 0x40
<7>[   33.101293] ieee80211 phy0: change: 0x40
<7>[   33.321293] ieee80211 phy0: change: 0x40
<7>[   33.541293] ieee80211 phy0: change: 0x40
<7>[   33.761291] ieee80211 phy0: change: 0x40
<7>[   33.981291] ieee80211 phy0: change: 0x40
<7>[   34.201291] ieee80211 phy0: change: 0x40
<7>[   34.421291] ieee80211 phy0: change: 0x40
<7>[   34.641291] ieee80211 phy0: change: 0x40
<7>[   34.861291] ieee80211 phy0: change: 0x40
<7>[   35.081295] ieee80211 phy0: change: 0x60
<7>[   35.185310] ieee80211 phy0: change: 0x100
<7>[   35.194337] ieee80211 phy0: change: 0x100
<7>[   35.203457] ieee80211 phy0: change: 0x40
<7>[   35.421292] ieee80211 phy0: change: 0x40
<7>[   35.641295] ieee80211 phy0: change: 0x40
<7>[   35.745318] ieee80211 phy0: change: 0x100
<7>[   35.809156] ieee80211 phy0: change: 0x100
<7>[   35.818178] ieee80211 phy0: change: 0x42
<6>[   35.990319] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[   35.996762] br-lan: port 3(wlan0) entered blocking state
<6>[   36.002103] br-lan: port 3(wlan0) entered forwarding state
<6>[  121.174510] xt_conntrack: cannot load conntrack support for proto=10
<6>[  149.624016] xt_conntrack: cannot load conntrack support for proto=10
<6>[  317.781883] xt_conntrack: cannot load conntrack support for proto=10
<1>[70442.763618] Unable to handle kernel NULL pointer dereference at virtual address 0000000c
<1>[70442.771761] pgd = ddddc000
<1>[70442.774477] [0000000c] *pgd=1d23d831, *pte=00000000, *ppte=00000000
<0>[70442.780811] Internal error: Oops: 17 [#1] SMP ARM
<4>[70442.785532] Modules linked in: pppoe ppp_async pppox ppp_generic iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt mwlwifi mac80211 cfg80211 compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables gpio_button_hotplug
<4>[70442.838560] CPU: 1 PID: 1711 Comm: hostapd Not tainted 4.9.77 #0
<4>[70442.844589] Hardware name: Marvell Armada 380/385 (Device Tree)
<4>[70442.850532] task: dec6d300 task.stack: ddd78000
<4>[70442.855092] PC is at mwl_fwcmd_destroy_ba+0x98/0xf4 [mwlwifi]
<4>[70442.860867] LR is at mwl_fwcmd_destroy_ba+0x34/0xf4 [mwlwifi]
<4>[70442.866637] pc : [<bf0dc844>]    lr : [<bf0dc7e0>]    psr: 80000013
<4>[70442.866637] sp : ddd79c80  ip : 00000000  fp : 00000000
<4>[70442.878161] r10: ddde3620  r9 : de38cac0  r8 : de38cac0
<4>[70442.883406] r7 : ddde1620  r6 : ddde2924  r5 : 00000000  r4 : ddd8c000
<4>[70442.889959] r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : 00000000
<4>[70442.896513] Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
<4>[70442.903677] Control: 10c5387d  Table: 1dddc04a  DAC: 00000051
<0>[70442.909445] Process hostapd (pid: 1711, stack limit = 0xddd78210)
<0>[70442.915562] Stack: (0xddd79c80 to 0xddd7a000)
<0>[70442.919937] 9c80: 00000001 ddde1620 dd3c55d8 ddde45e0 ddde0be0 bf0dcbac dd3c55d8 ddde1620
<0>[70442.928150] 9ca0: ddde0be0 df6fbce0 de3d0300 de7d4800 00000014 bf0d7c68 dd3c5000 00000002
<0>[70442.936362] 9cc0: 00000001 dd14f414 de3d0300 de7d4800 00000014 bf06aca4 ddde0be0 df6fb4c0
<0>[70442.944574] 9ce0: dd3c5000 bf06d2e4 00000002 00000002 dd3c5000 ddde0be0 df6fb4c0 bf06e278
<0>[70442.952786] 9d00: dd3c5000 00000000 00000000 dd3c5000 dd14f420 bf06e3c4 df6fb4c0 00000454
<0>[70442.960999] 9d20: dd14f420 bf06e43c ddde0000 df6fb000 ddd79d68 bf03add8 dd14f420 0002000c
<0>[70442.969210] 9d40: ddd79d68 de3d0300 df57a000 bf0296e8 00000000 df57a1fc df57a000 c03d4560
<0>[70442.977423] 9d60: bf05653a 1f5b5000 5a7275f6 00000601 dd14f400 dd14f410 dde5ed80 de7d4800
<0>[70442.985635] 9d80: ddde0000 df6fb000 dd14f400 de3d0300 c03d42d8 ddc99c00 ddd79dcc 00000000
<0>[70442.993847] 9da0: 00000008 c03d38fc c0656b08 de3d0300 de3d0300 c03d42c4 df4ba400 00000028
<0>[70443.002059] 9dc0: de3d0300 c03d3300 ddc99c00 7fffffff 00000000 de3d0300 00000000 ddd79f68
<0>[70443.010270] 9de0: 00000028 ddc99c00 00000000 c03d376c 00000000 c0227e2c 00000028 df7dad00
<0>[70443.018482] 9e00: 00000000 000006af 00000000 00000000 00000001 ddd79f68 00000000 ddd79e8c
<0>[70443.026694] 9e20: df16a000 00000000 c0630fc8 00000000 00000000 c038e534 ddd79f68 c038eac4
<0>[70443.034906] 9e40: 00000000 00000000 00000000 009a0010 00000028 be8f2c1c 00000000 ddd79eb4
<0>[70443.043118] 9e60: df16a000 c038ecbc ddbd30c0 00000000 be8f2c74 009b4030 00004000 00000000
<0>[70443.051330] 9e80: ffffffff ffffffff 00000051 c0654d80 ddd79ecc 00000051 00008933 00000000
<0>[70443.059541] 9ea0: 00000000 be8f2cac 00000020 00000010 00000000 00000000 00000000 00000000
<0>[70443.067753] 9ec0: ffffffff 0000007f 00000000 6e616c77 dd636c80 60000013 df401080 dd636a00
<0>[70443.075965] 9ee0: 00000000 dd636a00 df22d0a0 c00f379c df22d10c 00000007 00000000 00000000
<0>[70443.084177] 9f00: dec6d300 c005af44 ddd79f08 ddd79f08 df401180 df22d080 df178000 00000000
<0>[70443.092390] 9f20: df401580 df178000 df178000 0004094d df22d0a0 df16a000 be8f2c90 00000000
<0>[70443.100601] 9f40: 00000128 c000ef04 ddd78000 00000000 b6f44740 c038f864 00000000 00000000
<0>[70443.108813] 9f60: 00000000 fffffff7 ddd79eac 0000000c 00000001 00000000 00000000 ddd79e54
<0>[70443.117025] 9f80: 00000000 00000006 00000000 00000000 00000000 00000000 00000000 00000000
<0>[70443.125236] 9fa0: b6fbe110 c000ed40 00000000 00000000 00000005 be8f2c90 00000000 00000000
<0>[70443.133449] 9fc0: 00000000 00000000 b6fbe110 00000128 b6f44ef0 00000000 000252b4 b6f44740
<0>[70443.141661] 9fe0: be8f2c38 be8f2c24 b6f95204 b6f946d0 60000010 00000005 ffffffff ffffffff
<4>[70443.149890] [<bf0dc844>] (mwl_fwcmd_destroy_ba [mwlwifi]) from [<bf0dcbac>] (mwl_fwcmd_del_sta_streams+0x98/0x330 [mwlwifi])
<4>[70443.161164] [<bf0dcbac>] (mwl_fwcmd_del_sta_streams [mwlwifi]) from [<bf0d7c68>] (mwl_mac80211_sta_remove+0x38/0x1ec [mwlwifi])
<4>[70443.172740] [<bf0d7c68>] (mwl_mac80211_sta_remove [mwlwifi]) from [<bf06aca4>] (drv_sta_state+0x16c/0x184 [mac80211])
<4>[70443.183433] [<bf06aca4>] (drv_sta_state [mac80211]) from [<bf06d2e4>] (sta_info_move_state+0xbc/0x1d0 [mac80211])
<4>[70443.193775] [<bf06d2e4>] (sta_info_move_state [mac80211]) from [<bf06e278>] (sta_set_sinfo+0x954/0xa80 [mac80211])
<4>[70443.204204] [<bf06e278>] (sta_set_sinfo [mac80211]) from [<bf06e3c4>] (__sta_info_destroy+0x20/0x28 [mac80211])
<4>[70443.214372] [<bf06e3c4>] (__sta_info_destroy [mac80211]) from [<bf06e43c>] (sta_info_destroy_addr_bss+0x2c/0x44 [mac80211])
<4>[70443.225588] [<bf06e43c>] (sta_info_destroy_addr_bss [mac80211]) from [<bf03add8>] (nl80211_del_station+0xe8/0xf0 [cfg80211])
<4>[70443.236868] [<bf03add8>] (nl80211_del_station [cfg80211]) from [<bf0296e8>] (extack_doit+0x2c/0x70 [compat])
<4>[70443.246741] [<bf0296e8>] (extack_doit [compat]) from [<c03d4560>] (genl_rcv_msg+0x288/0x310)
<4>[70443.255216] [<c03d4560>] (genl_rcv_msg) from [<c03d38fc>] (netlink_rcv_skb+0x58/0xb4)
<4>[70443.263080] [<c03d38fc>] (netlink_rcv_skb) from [<c03d42c4>] (genl_rcv+0x20/0x34)
<4>[70443.270593] [<c03d42c4>] (genl_rcv) from [<c03d3300>] (netlink_unicast+0x138/0x1fc)
<4>[70443.278283] [<c03d3300>] (netlink_unicast) from [<c03d376c>] (netlink_sendmsg+0x2f0/0x310)
<4>[70443.286586] [<c03d376c>] (netlink_sendmsg) from [<c038e534>] (sock_sendmsg+0x14/0x24)
<4>[70443.294451] [<c038e534>] (sock_sendmsg) from [<c038eac4>] (___sys_sendmsg+0x184/0x228)
<4>[70443.302403] [<c038eac4>] (___sys_sendmsg) from [<c038f864>] (__sys_sendmsg+0x40/0x64)
<4>[70443.310271] [<c038f864>] (__sys_sendmsg) from [<c000ed40>] (ret_fast_syscall+0x0/0x48)
<0>[70443.318223] Code: e5840010 e5d81004 e5c41014 e598c000 (e59c300c)
<4>[70443.324372] ---[ end trace bf36642614617548 ]---
28.01.20181307Base systemBug ReportVery LowCriticalClearFog initramfs broken AllUnconfirmed Task Description

It appears this has been broken for quite some time, likely before LEDE forked from OpenWrt, as there are CC builds with initrams images working fine (early 2016), however the CC repo no longer compiles a working initrams image, nor does LEDE.

  • The changes causing the issue appear to have occurred between 2016.02.18 and 2016.09.06
    • I have a working OpenWrt initramfs image created 2016.02.17 @14:26:46 UTC which boots w/o issue.
    • This post from the SolidRun forum on 2016.09.06 @ 10:30am (local) verifies boot issues occurring at least as of this date.
      • Xue Liu’s [clockworkbird9] repo is mentioned and a link to his blog is provided, however he either forked OpenWrt prior to the issue originating or fixed whatever was broken.

Unexpected Output

Current LEDE/OpenWrt initramfs image is a mess all around (Compiled 2018.01.25)

   Marvell>> tftpboot lede-mvebu-armada-388-clearfog-pro-initramfs.bin
   Using egiga1 device
   TFTP from server 10.4.50.38; our IP address is 10.4.50.170
   Filename 'lede-mvebu-armada-388-clearfog-pro-initramfs.bin'.
   Load address: 0x2000000
   Loading: #################################################################
	        #################################################################
	        #################################################################
	        2.4 MiB/s
   done
   Bytes transferred = 4690096 (4790b0 hex)
 
   Marvell>> bootm
   Wrong Image Format for bootm command
   ERROR: cant get kernel image!
  • Likely due to these options being removed from menuconfig:
    • Target Images
      • Include kernel in root filesystem
        • include uImage
        • include zImage
        • include FIT
      • Include DTB in root filesystem
    • See Screenshot
      • Left: Old OpenWrt Repo
      • Right: Current LEDE/OpenWrt Repo

Booting a LEDE zImage goes a bit better (...until the kernel panic | Compiled 2018.01.25)

  • This may be expected behavior, as I didn’t realize the zImage is the kernel image.
    Marvell>> tftpboot zImage-Solidrun-Clearfog-A1                 
    Using egiga1 device
    TFTP from server 10.4.50.38; our IP address is 10.4.50.170
    Filename 'zImage-Solidrun-Clearfog-A1'.
    Load address: 0x2000000
    Loading: #################################################################
    	 #################################################################
    	 #################################################################
    	 2.4 MiB/s
    done
    Bytes transferred = 2132324 (208964 hex)
    Marvell>> bootz
 
    Starting kernel ...
 
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Linux version 4.4.14 (thepeople@trabant) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 50140) ) #1 SMP Thu Dec 7 14:50:07 UTC 2017
    [    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [    0.000000] Machine model: SolidRun Clearfog A1
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] PERCPU: Embedded 12 pages/cpu @ef7ce000 s17984 r8192 d22976 u49152
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
    [    0.000000] Kernel command line: 
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Memory: 1032820K/1048576K available (4223K kernel code, 178K rwdata, 1572K rodata, 264K init, 301K bss, 15756K reserved, 0K cma-reserved, 262144K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    [    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc05b1078   (5797 kB)
    [    0.000000]       .init : 0xc05b2000 - 0xc05f4000   ( 264 kB)
    [    0.000000]       .data : 0xc05f4000 - 0xc0620a5c   ( 179 kB)
    [    0.000000]        .bss : 0xc0620a5c - 0xc066c244   ( 302 kB)
    [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
    [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
    [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
    [    0.000000] L2C-310 D prefetch enabled, offset 1 lines
    [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
    [    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
    [    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
    [    0.000000] Switching to timer-based delay loop, resolution 40ns
    [    0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
    [    0.000009] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
    [    0.000106] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
    [    0.000113] pid_max: default: 32768 minimum: 301
    [    0.000148] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000152] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000340] CPU: Testing write buffer coherency: ok
    [    0.000439] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.000465] Setting up static identity map for 0x8280 - 0x82d8
    [    0.000550] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0x4
    [    0.000633] mvebu-pmsu: Initializing Power Management Service Unit
    [    0.001026] Booting CPU 1
    [    0.001190] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.001218] Brought up 2 CPUs
    [    0.001223] SMP: Total of 2 processors activated (100.00 BogoMIPS).
    [    0.001226] CPU: All CPU(s) started in SVC mode.
    [    0.002883] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    [    0.002954] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    [    0.003000] pinctrl core: initialized pinctrl subsystem
    [    0.003380] NET: Registered protocol family 16
    [    0.003837] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [    0.029930] cpuidle: using governor ladder
    [    0.032504] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
    [    0.032512] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
    [    0.060714] SCSI subsystem initialized
    [    0.060995] usbcore: registered new interface driver usbfs
    [    0.061020] usbcore: registered new interface driver hub
    [    0.061042] usbcore: registered new device driver usb
    [    0.061712] clocksource: Switched to clocksource armada_370_xp_clocksource
    [    0.062143] NET: Registered protocol family 2
    [    0.062382] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.062424] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.062484] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.062516] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.062538] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.062619] NET: Registered protocol family 1
    [    0.062981] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.065945] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.065956] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    0.066587] bounce: pool size: 64 pages
    [    0.066594] io scheduler noop registered
    [    0.066599] io scheduler deadline registered (default)
    [    0.066978] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
    [    0.067276] irq: Cannot allocate irq_descs @ IRQ50, assuming pre-allocated
    [    0.067412] irq: Cannot allocate irq_descs @ IRQ82, assuming pre-allocated
    [    0.067660] mv_xor f1060800.xor: Marvell shared XOR driver
    [    0.101937] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
    [    0.102017] mv_xor f1060900.xor: Marvell shared XOR driver
    [    0.141919] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
    [    0.142055] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
    [    0.142889] console [ttyS0] disabled
    [    0.162961] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 15625000) is a 16550A
    [    0.715227] console [ttyS0] enabled
    [    0.738916] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 15625000) is a 16550A
    [    0.748295] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.757374] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
    [    0.766754] scsi host0: ahci-mvebu
    [    0.770314] scsi host1: ahci-mvebu
    [    0.773824] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 45
    [    0.781766] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 45
    [    0.789792] ahci-mvebu f10e0000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.798869] ahci-mvebu f10e0000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
    [    0.808345] scsi host2: ahci-mvebu
    [    0.811918] scsi host3: ahci-mvebu
    [    0.815415] ata3: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x100 irq 46
    [    0.823359] ata4: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x180 irq 46
    [    0.832327] libphy: Fixed MDIO Bus: probed
    [    0.836538] libphy: orion_mdio_bus: probed
    [    0.841803] mvneta f1030000.ethernet eth0: Using hardware mac address 00:50:43:4c:18:3b
    [    0.850637] mvneta f1034000.ethernet eth1: Using random mac address c6:31:9b:9c:a7:67
    [    0.859250] mvneta f1070000.ethernet eth2: Using hardware mac address 00:50:43:ee:18:3b
    [    0.867330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.873879] ehci-pci: EHCI PCI platform driver
    [    0.878359] ehci-platform: EHCI generic platform driver
    [    0.883691] ehci-orion: EHCI orion driver
    [    0.887777] orion-ehci f1058000.usb: EHCI Host Controller
    [    0.893203] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
    [    0.900847] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000
    [    0.921501] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
    [    0.927667] hub 1-0:1.0: USB hub found
    [    0.931437] hub 1-0:1.0: 1 port detected
    [    0.935663] xhci-hcd f10f0000.usb3: xHCI Host Controller
    [    0.940994] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
    [    0.948605] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
    [    0.957170] xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000
    [    0.963146] hub 2-0:1.0: USB hub found
    [    0.966914] hub 2-0:1.0: 1 port detected
    [    0.970927] xhci-hcd f10f0000.usb3: xHCI Host Controller
    [    0.976265] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
    [    0.983796] usb usb3: We dont know the algorithms for LPM for this host, disabling LPM.
    [    0.992105] hub 3-0:1.0: USB hub found
    [    0.995872] hub 3-0:1.0: 1 port detected
    [    0.999930] xhci-hcd f10f8000.usb3: xHCI Host Controller
    [    1.005271] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
    [    1.012863] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
    [    1.021422] xhci-hcd f10f8000.usb3: irq 49, io mem 0xf10f8000
    [    1.027391] hub 4-0:1.0: USB hub found
    [    1.031159] hub 4-0:1.0: 1 port detected
    [    1.035201] xhci-hcd f10f8000.usb3: xHCI Host Controller
    [    1.040528] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
    [    1.048072] usb usb5: We dont know the algorithms for LPM for this host, disabling LPM.
    [    1.056389] hub 5-0:1.0: USB hub found
    [    1.060156] hub 5-0:1.0: 1 port detected
    [    1.064290] usbcore: registered new interface driver usb-storage
    [    1.070460] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
    [    1.078105] i2c /dev entries driver
    [    1.092469] orion_wdt: Initial timeout 171 sec
    [    1.097786] marvell-cesa f1090000.crypto: CESA device successfully registered
    [    1.105445] NET: Registered protocol family 10
    [    1.110382] NET: Registered protocol family 17
    [    1.114870] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
    [    1.127526] Bridge firewalling registered
    [    1.131551] 8021q: 802.1Q VLAN Support v1.8
    [    1.135771] Registering SWP/SWPB emulation handler
    [    1.141319] armada38x-rtc f10a3800.rtc: setting system clock to 1970-06-02 16:51:43 UTC (13193503)
    [    1.141517] ata1: SATA link down (SStatus 0 SControl 300)
    [    1.141542] ata2: SATA link down (SStatus 0 SControl 300)
    [    1.161504] ata4: SATA link down (SStatus 0 SControl 300)
    [   1.166942] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.172389] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
    [    1.179889] Please append a correct "root=" boot option; here are the available partitions:
    [    1.188270] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
    [    1.196553] CPU1: stopping
    [    1.199266] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.14 #1
    [    1.205198] Hardware name: Marvell Armada 380/385 (Device Tree)
    [    1.211142] [<c001fab8>] (unwind_backtrace) from [<c001c420>] (show_stack+0x10/0x14)
    [    1.218909] [<c001c420>] (show_stack) from [<c019f54c>] (dump_stack+0x8c/0xa0)
    [    1.226149] [<c019f54c>] (dump_stack) from [<c001e94c>] (handle_IPI+0x108/0x1a0)
    [    1.233563] [<c001e94c>] (handle_IPI) from [<c0009508>] (gic_handle_irq+0x80/0x94)
    [    1.241151] [<c0009508>] (gic_handle_irq) from [<c000a5f4>] (__irq_svc+0x54/0x70)
    [    1.248650] Exception stack(0xef073f80 to 0xef073fc8)
    [    1.253712] 3f80: 00000001 00000000 00000000 c000b3c0 ef072000 c05f6498 c04fcab4 00000000
    [    1.261909] 3fa0: c05ee224 ef073fd8 00000000 c05f1118 00000000 ef073fd0 c00194cc c00194d0
    [    1.270104] 3fc0: 60000013 ffffffff
    [    1.273600] [<c000a5f4>] (__irq_svc) from [<c00194d0>] (arch_cpu_idle+0x34/0x50)
    [    1.281015] [<c00194d0>] (arch_cpu_idle) from [<c005b324>] (cpu_startup_entry+0x148/0x210)
    [    1.289298] [<c005b324>] (cpu_startup_entry) from [<000095ac>] (0x95ac)
    [    1.295928] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

Current OpenWrt CC initramfs freezes upon loading the kernel (Compiled 2018.01.27)

   Marvell>> tftpboot openwrt-mvebu-armada-388-clearfog-initramfs
   Using egiga1 device
   TFTP from server 10.4.50.38; our IP address is 10.4.50.170
   Filename 'openwrt-mvebu-armada-388-clearfog-initramfs'.
   Load address: 0x2000000
   Loading: #################################################################
	        #################################################################
	        #################################################################
	        2.4 MiB/s
   done
   Bytes transferred = 7925725 (78efdd hex)
 
   Marvell>> bootm
   ## Booting kernel from Legacy Image at 02000000 ...
      Image Name:   ARM OpenWrt Linux-3.18.91
      Created:      2018-01-27   3:22:24 UTC
      Image Type:   ARM Linux Kernel Image (uncompressed)
      Data Size:    7925661 Bytes = 7.6 MiB
      Load Address: 00008000
      Entry Point:  00008000
      Verifying Checksum ... OK
      Loading Kernel Image ... OK
   OK
 
   Starting kernel ...
  • It freezes at this point, with no further output

Expected Output (working initramfs)

r48735 (Compiled 2016.02.17)

    Marvell>> tftpboot openwrt-mvebu-armada-388-clearfog-initramfs
    Using egiga1 device
    TFTP from server 10.4.50.38; our IP address is 10.4.50.170
    Filename 'openwrt-mvebu-armada-388-clearfog-initramfs'.
    Load address: 0x2000000
    Loading: #################################################################
    	  #################################################################
    	  #################################################################
    	  2.4 MiB/s
    done
    Bytes transferred = 3022310 (2e1de6 hex)
 
    Marvell>> bootm
    ## Booting kernel from Legacy Image at 02000000 ...
       Image Name:   ARM OpenWrt Linux-4.1.16
       Created:      2016-02-17  14:26:46 UTC
       Image Type:   ARM Linux Kernel Image (uncompressed)
       Data Size:    3022246 Bytes = 2.9 MiB
       Load Address: 00008000
       Entry Point:  00008000
       Verifying Checksum ... OK
       Loading Kernel Image ... OK
    OK
 
    Starting kernel ...
 
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Linux version 4.1.16 (vlado@b50) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r48723) ) #6 SMP Wed Feb 17 14:59:16 UTC 2016
    [    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [    0.000000] Machine model: SolidRun Clearfog A1
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] PERCPU: Embedded 10 pages/cpu @eefd1000 s11776 r8192 d20992 u40960
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
    [    0.000000] Kernel command line: 
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Memory: 1029820K/1048576K available (3435K kernel code, 138K rwdata, 1228K rodata, 4592K init, 168K bss, 18756K reserved, 0K cma-reserved, 270336K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc0495e9c   (4664 kB)
    [    0.000000]       .init : 0xc0496000 - 0xc0912000   (4592 kB)
    [    0.000000]       .data : 0xc0912000 - 0xc09348dc   ( 139 kB)
    [    0.000000]        .bss : 0xc09348dc - 0xc095e9a4   ( 169 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
    [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
    [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
    [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
    [    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
    [    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x46070001
    [    0.000006] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
    [    0.000016] clocksource armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
    [    0.000157] Calibrating delay loop... 3188.32 BogoMIPS (lpj=15941632)
    [    0.059922] pid_max: default: 32768 minimum: 301
    [    0.059975] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.059980] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.060187] CPU: Testing write buffer coherency: ok
    [    0.060286] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.060311] Setting up static identity map for 0x8280 - 0x82d8
    [    0.060398] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0x4
    [    0.060484] mvebu-pmsu: Initializing Power Management Service Unit
    [    0.060915] Booting CPU 1
    [    0.119940] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.119969] Brought up 2 CPUs
    [    0.119975] SMP: Total of 2 processors activated (6384.02 BogoMIPS).
    [    0.119978] CPU: All CPU(s) started in SVC mode.
    [    0.121764] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    [    0.121843] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    [    0.121875] pinctrl core: initialized pinctrl subsystem
    [    0.122216] NET: Registered protocol family 16
    [    0.122655] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [    0.149929] cpuidle: using governor ladder
    [    0.152518] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
    [    0.152527] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling[    0.180892] Switched to clocksource armada_370_xp_clocksource
    [    0.181354] NET: Registered protocol family 2
    [    0.181626] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.181665] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.181728] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.181766] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.181790] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.181897] NET: Registered protocol family 1
    [    0.202800] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.203086] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.203094] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    0.203620] bounce: pool size: 64 pages
    [    0.203629] io scheduler noop registered
    [    0.203635] io scheduler deadline registered (default)
    [    0.204062] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
    [    0.204398] irq: Cannot allocate irq_descs @ IRQ48, assuming pre-allocated
    [    0.204557] irq: Cannot allocate irq_descs @ IRQ80, assuming pre-allocated
    [    0.204865] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
    [    0.204873] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
    [    0.204878] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
    [    0.204883] pci_bus 0000:00: root bus resource [bus 00-ff]
    [    0.205081] PCI: bus0: Fast back to back transfers disabled
    [    0.205087] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [    0.205094] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [    0.205147] PCI: bus1: Fast back to back transfers enabled
    [    0.205205] PCI: bus2: Fast back to back transfers enabled
    [    0.205227] pci 0000:00:02.0: PCI bridge to [bus 01]
    [    0.205235] pci 0000:00:03.0: PCI bridge to [bus 02]
    [    0.205319] mv_xor f1060800.xor: Marvell shared XOR driver
    [    0.240922] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
    [    0.280920] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
    [    0.280980] mv_xor f1060900.xor: Marvell shared XOR driver
    [    0.320931] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
    [    0.360921] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
    [    0.361040] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
    [    0.361326] console [ttyS0] disabled
    [    0.381355] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 15625000) is a 16550A
    [    0.965181] console [ttyS0] enabled
    [    0.988835] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 15625000) is a 16550A
    [    0.998710] libphy: Fixed MDIO Bus: probed
    [    1.002938] libphy: orion_mdio_bus: probed
    [    1.008077] mvneta f1030000.ethernet eth0: Using hardware mac address 00:50:43:11:03:0d
    [    1.016851] mvneta f1034000.ethernet eth1: Using random mac address fa:fb:df:f9:5e:cc
    [    1.025385] mvneta f1070000.ethernet eth2: Using hardware mac address 00:50:43:0b:03:0d
    [    1.033899] NET: Registered protocol family 10
    [    1.038792] NET: Registered protocol family 17
    [    1.043270] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
    [    1.055917] 8021q: 802.1Q VLAN Support v1.8
    [    1.060127] Registering SWP/SWPB emulation handler
    [    1.065542] hctosys: unable to open rtc device (rtc0)
    [    1.073694] Freeing unused kernel memory: 4592K (c0496000 - c0912000)
    [    1.084136] init: Console is alive
    [    1.092498] usbcore: registered new interface driver usbfs
    [    1.098025] usbcore: registered new interface driver hub
    [    1.103400] usbcore: registered new device driver usb
    [    1.110084] SCSI subsystem initialized
    [    1.114896] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.121693] ehci-platform: EHCI generic platform driver
    [    1.127263] ehci-orion: EHCI orion driver
    [    1.131413] orion-ehci f1058000.usb: EHCI Host Controller
    [    1.136834] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
    [    1.144492] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000
    [    1.160910] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
    [    1.167093] hub 1-0:1.0: USB hub found
    [    1.170862] hub 1-0:1.0: 1 port detected
    [    1.179139] xhci-hcd f10f0000.usb3: xHCI Host Controller
    [    1.184488] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
    [    1.192080] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
    [    1.200644] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
    [    1.206652] hub 2-0:1.0: USB hub found
    [    1.210421] hub 2-0:1.0: 1 port detected
    [    1.214450] xhci-hcd f10f0000.usb3: xHCI Host Controller
    [    1.219779] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
    [    1.227335] usb usb3: We dont know the algorithms for LPM for this host, disabling LPM.
    [    1.235651] hub 3-0:1.0: USB hub found
    [    1.239417] hub 3-0:1.0: 1 port detected
    [    1.243492] xhci-hcd f10f8000.usb3: xHCI Host Controller
    [    1.248823] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
    [    1.256412] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
    [    1.264975] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
    [    1.270975] hub 4-0:1.0: USB hub found
    [    1.274743] hub 4-0:1.0: 1 port detected
    [    1.278759] xhci-hcd f10f8000.usb3: xHCI Host Controller
    [    1.284092] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
    [    1.291620] usb usb5: We dont know the algorithms for LPM for this host, disabling LPM.
    [    1.299925] hub 5-0:1.0: USB hub found
    [    1.303697] hub 5-0:1.0: 1 port detected
    [    1.308557] usbcore: registered new interface driver usb-storage
    [    2.087795] init: - preinit -
    Press the [f] key and hit [enter] to enter failsafe mode
    Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
    [    5.131673] procd: - early -
    [    5.706452] procd: - ubus -
    [    6.710759] random: ubusd urandom read with 0 bits of entropy available
    [    6.717649] procd: - init -
    Please press Enter to activate this console.
    [    6.863841] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [    6.871496] i2c /dev entries driver
    [    6.876831] ip_tables: (C) 2000-2006 Netfilter Core Team
    [    6.884031] nf_conntrack version 0.5.0 (16162 buckets, 64648 max)
    [    7.074295] xt_time: kernel timezone is -0000
    [    7.091235] PPP generic driver version 2.4.2
    [    7.095849] NET: Registered protocol family 24
    [    8.723584] device eth0 entered promiscuous mode
    [    8.728953] br-lan: port 1(eth0) entered forwarding state
    [    8.734388] br-lan: port 1(eth0) entered forwarding state
    [    8.751499] device eth1 entered promiscuous mode
    [    8.756174] br-lan: port 2(eth1) entered forwarding state
    [    8.761615] br-lan: port 2(eth1) entered forwarding state
    [    8.781126] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
    [    9.720913] br-lan: port 1(eth0) entered disabled state
    [    9.726221] br-lan: port 2(eth1) entered disabled state
    [   10.730912] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
    [   10.738772] br-lan: port 1(eth0) entered forwarding state
    [   10.744197] br-lan: port 1(eth0) entered forwarding state
    [   10.750020] mvneta f1034000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
    [   10.757942] br-lan: port 2(eth1) entered forwarding state
    [   10.763366] br-lan: port 2(eth1) entered forwarding state
    [   12.740888] br-lan: port 1(eth0) entered forwarding state
    [   12.760887] br-lan: port 2(eth1) entered forwarding state
 
 
    BusyBox v1.24.1 () built-in shell (ash)
 
      _______                     ________        __
     |       |.-----.-----.-----.|  |  |  |.----.|  |_
     |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
     |_______||   __|_____|__|__||________||__|  |____|
              |__| W I R E L E S S   F R E E D O M
     -----------------------------------------------------
     DESIGNATED DRIVER (Bleeding Edge, r48735)
     -----------------------------------------------------
      * 2 oz. Orange Juice         Combine all juices in a
      * 2 oz. Pineapple Juice      tall glass filled with
      * 2 oz. Grapefruit Juice     ice, stir well.
      * 2 oz. Cranberry Juice
     -----------------------------------------------------
    root@OpenWrt:/#

r49395 (Compiled 2018.01.27 | Xue Liu’s OpenWrt Repo)

   Marvell>> tftpboot openwrt-mvebu-armada-388-clearfog-initramfs
   Using egiga1 device
   TFTP from server 10.4.50.38; our IP address is 10.4.50.170
   Filename 'openwrt-mvebu-armada-388-clearfog-initramfs'.
   Load address: 0x2000000
   Loading: #################################################################
   	  #################################################################
   	  #################################################################
   	  2.4 MiB/s
   done
   Bytes transferred = 3920894 (3bd3fe hex)
   Marvell>> bootm
   ## Booting kernel from Legacy Image at 02000000 ...
      Image Name:   ARM OpenWrt Linux-4.1.23
      Created:      2016-06-30   5:39:05 UTC
      Image Type:   ARM Linux Kernel Image (uncompressed)
      Data Size:    3920830 Bytes = 3.7 MiB
      Load Address: 00008000
      Entry Point:  00008000
      Verifying Checksum ... OK
      Loading Kernel Image ... OK
   OK
 
   Starting kernel ...
 
   [    0.000000] Booting Linux on physical CPU 0x0
   [    0.000000] Linux version 4.1.23 (jw@u17) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 r49395) ) #2 SMP Sat Jan 27 05:52:51 UTC 2018
   [    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
   [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
   [    0.000000] Machine model: SolidRun Clearfog A1
   [    0.000000] Memory policy: Data cache writealloc
   [    0.000000] PERCPU: Embedded 10 pages/cpu @eefd1000 s11776 r8192 d20992 u40960
   [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
   [    0.000000] Kernel command line: 
   [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
   [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
   [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
   [    0.000000] Memory: 1026868K/1048576K available (3435K kernel code, 138K rwdata, 1228K rodata, 7544K init, 168K bss, 21708K reserved, 0K cma-reserved, 270336K highmem)
   [    0.000000] Virtual kernel memory layout:
   [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
   [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
   [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
   [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
   [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
   [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
   [    0.000000]       .text : 0xc0008000 - 0xc0495e9c   (4664 kB)
   [    0.000000]       .init : 0xc0496000 - 0xc0bf4000   (7544 kB)
   [    0.000000]       .data : 0xc0bf4000 - 0xc0c1694c   ( 139 kB)
   [    0.000000]        .bss : 0xc0c1694c - 0xc0c40a24   ( 169 kB)
   [    0.000000] Hierarchical RCU implementation.
   [    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
   [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
   [    0.000000] NR_IRQS:16 nr_irqs:16 16
   [    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
   [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
   [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
   [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
   [    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
   [    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x46070001
   [    0.000006] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
   [    0.000016] clocksource armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
   [    0.000156] Calibrating delay loop... 3188.32 BogoMIPS (lpj=15941632)
   [    0.059921] pid_max: default: 32768 minimum: 301
   [    0.059975] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
   [    0.059980] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
   [    0.060187] CPU: Testing write buffer coherency: ok
   [    0.060287] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
   [    0.060312] Setting up static identity map for 0x8280 - 0x82d8
   [    0.060399] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0x4
   [    0.060486] mvebu-pmsu: Initializing Power Management Service Unit
   [    0.060919] Booting CPU 1
   [    0.119939] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
   [    0.119968] Brought up 2 CPUs
   [    0.119974] SMP: Total of 2 processors activated (6384.02 BogoMIPS).
   [    0.119977] CPU: All CPU(s) started in SVC mode.
   [    0.121712] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
   [    0.121790] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
   [    0.121823] pinctrl core: initialized pinctrl subsystem
   [    0.122159] NET: Registered protocol family 16
   [    0.122595] DMA: preallocated 256 KiB pool for atomic coherent allocations
   [    0.149921] cpuidle: using governor ladder
   [    0.152478] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
   [    0.152487] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling[    0.180937] Switched to clocksource armada_370_xp_clocksource
   [    0.181394] NET: Registered protocol family 2
   [    0.181808] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
   [    0.181846] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
   [    0.181909] TCP: Hash tables configured (established 8192 bind 8192)
   [    0.181945] UDP hash table entries: 512 (order: 2, 16384 bytes)
   [    0.181969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
   [    0.182064] NET: Registered protocol family 1
   [    0.211472] futex hash table entries: 512 (order: 3, 32768 bytes)
   [    0.211907] squashfs: version 4.0 (2009/01/31) Phillip Lougher
   [    0.211916] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
   [    0.212261] bounce: pool size: 64 pages
   [    0.212269] io scheduler noop registered
   [    0.212276] io scheduler deadline registered (default)
   [    0.212708] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
   [    0.213051] irq: Cannot allocate irq_descs @ IRQ48, assuming pre-allocated
   [    0.213206] irq: Cannot allocate irq_descs @ IRQ80, assuming pre-allocated
   [    0.213509] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
   [    0.213517] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
   [    0.213525] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
   [    0.213531] pci_bus 0000:00: root bus resource [bus 00-ff]
   [    0.213721] PCI: bus0: Fast back to back transfers disabled
   [    0.213728] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
   [    0.213734] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
   [    0.213786] PCI: bus1: Fast back to back transfers enabled
   [    0.213847] PCI: bus2: Fast back to back transfers enabled
   [    0.213868] pci 0000:00:02.0: PCI bridge to [bus 01]
   [    0.213876] pci 0000:00:03.0: PCI bridge to [bus 02]
   [    0.213955] mv_xor f1060800.xor: Marvell shared XOR driver
   [    0.251038] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
   [    0.290970] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
   [    0.291030] mv_xor f1060900.xor: Marvell shared XOR driver
   [    0.330964] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
   [    0.370964] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
   [    0.371073] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
   [    0.371364] console [ttyS0] disabled
   [    0.391394] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 15625000) is a 16550A
   [    0.974982] console [ttyS0] enabled
   [    0.998634] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 15625000) is a 16550A
   [    1.008502] libphy: Fixed MDIO Bus: probed
   [    1.012730] libphy: orion_mdio_bus: probed
   [    1.017876] mvneta f1030000.ethernet eth0: Using hardware mac address 00:50:43:5a:07:04
   [    1.026640] mvneta f1034000.ethernet eth1: Using random mac address d6:15:0c:61:68:d9
   [    1.035175] mvneta f1070000.ethernet eth2: Using hardware mac address 00:50:43:0a:07:04
   [    1.043675] NET: Registered protocol family 10
   [    1.048569] NET: Registered protocol family 17
   [    1.053061] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
   [    1.065708] 8021q: 802.1Q VLAN Support v1.8
   [    1.069920] Registering SWP/SWPB emulation handler
   [    1.075317] hctosys: unable to open rtc device (rtc0)
   [    1.084968] Freeing unused kernel memory: 7544K (c0496000 - c0bf4000)
   [    1.095444] init: Console is alive
   [    1.105049] usbcore: registered new interface driver usbfs
   [    1.110581] usbcore: registered new interface driver hub
   [    1.115954] usbcore: registered new device driver usb
   [    1.126902] SCSI subsystem initialized
   [    1.131749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
   [    1.138544] ehci-platform: EHCI generic platform driver
   [    1.144141] ehci-orion: EHCI orion driver
   [    1.148257] orion-ehci f1058000.usb: EHCI Host Controller
   [    1.153689] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
   [    1.161343] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000
   [    1.180940] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
   [    1.187137] hub 1-0:1.0: USB hub found
   [    1.190909] hub 1-0:1.0: 1 port detected
   [    1.199341] xhci-hcd f10f0000.usb3: xHCI Host Controller
   [    1.204699] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
   [    1.212291] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
   [    1.220854] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
   [    1.226864] hub 2-0:1.0: USB hub found
   [    1.230634] hub 2-0:1.0: 1 port detected
   [    1.234670] xhci-hcd f10f0000.usb3: xHCI Host Controller
   [    1.239997] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
   [    1.247530] usb usb3: We dont know the algorithms for LPM for this host, disabling LPM.
   [    1.255845] hub 3-0:1.0: USB hub found
   [    1.259613] hub 3-0:1.0: 1 port detected
   [    1.263710] xhci-hcd f10f8000.usb3: xHCI Host Controller
   [    1.269041] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
   [    1.276630] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
   [    1.285195] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
   [    1.291190] hub 4-0:1.0: USB hub found
   [    1.294958] hub 4-0:1.0: 1 port detected
   [    1.298974] xhci-hcd f10f8000.usb3: xHCI Host Controller
   [    1.304309] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
   [    1.311842] usb usb5: We dont know the algorithms for LPM for this host, disabling LPM.
   [    1.320147] hub 5-0:1.0: USB hub found
   [    1.323921] hub 5-0:1.0: 1 port detected
   [    1.329839] sdhci: Secure Digital Host Controller Interface driver
   [    1.336054] sdhci: Copyright(c) Pierre Ossman
   [    1.340684] sdhci-pltfm: SDHCI platform and OF driver helper
   [    1.347178] usbcore: registered new interface driver usb-storage
   [    1.360572] init: - preinit -
   Press the [f] key and hit [enter] to enter failsafe mode
   Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
   [    4.406424] procd: - early -
   [    4.965685] procd: - ubus -
   [    5.019086] random: ubusd urandom read with 0 bits of entropy available
   [    5.025976] procd: - init -
   Please press Enter to activate this console.
   [    5.196134] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
   [    5.207844] ip6_tables: (C) 2000-2006 Netfilter Core Team
   [    5.215742] i2c /dev entries driver
   [    5.221208] ip_tables: (C) 2000-2006 Netfilter Core Team
   [    5.228628] nf_conntrack version 0.5.0 (16162 buckets, 64648 max)
   [    5.414558] xt_time: kernel timezone is -0000
   [    5.431616] PPP generic driver version 2.4.2
   [    5.436259] NET: Registered protocol family 24
   [    7.114973] device eth0 entered promiscuous mode
   [    7.122099] br-lan: port 1(eth0) entered forwarding state
   [    7.127527] br-lan: port 1(eth0) entered forwarding state
   [    7.148077] device eth1 entered promiscuous mode
   [    7.152853] br-lan: port 2(eth1) entered forwarding state
   [    7.158270] br-lan: port 2(eth1) entered forwarding state
   [    7.173015] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
   [    8.110954] br-lan: port 1(eth0) entered disabled state
   [    8.116262] br-lan: port 2(eth1) entered disabled state
   [    9.120956] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
   [    9.128814] br-lan: port 1(eth0) entered forwarding state
   [    9.134240] br-lan: port 1(eth0) entered forwarding state
   [    9.140957] mvneta f1034000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
   [    9.148813] br-lan: port 2(eth1) entered forwarding state
   [    9.154235] br-lan: port 2(eth1) entered forwarding state
   [   11.130932] br-lan: port 1(eth0) entered forwarding state
   [   11.150930] br-lan: port 2(eth1) entered forwarding state
 
   BusyBox v1.24.2 () built-in shell (ash)
   Enter 'help' for a list of built-in commands.
      _______                     ________        __
    |       |.-----.-----.-----.|  |  |  |.----.|  |_
    |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
    |_______||   __|_____|__|__||________||__|  |____|
             |__| W I R E L E S S   F R E E D O M
    -----------------------------------------------------
    DESIGNATED DRIVER (Bleeding Edge, r49395)
    -----------------------------------------------------
     * 2 oz. Orange Juice         Combine all juices in a
     * 2 oz. Pineapple Juice      tall glass filled with
     * 2 oz. Grapefruit Juice     ice, stir well.
     * 2 oz. Cranberry Juice
    -----------------------------------------------------
   root@OpenWrt:/#
25.01.20181300Base systemBug ReportVery LowCriticalRT-N12+(MT7620N): WLAN not working.TrunkUnconfirmed Task Description

Hello,

Device: RT-N12+
Issue: WLAN is not working properly. When enabled the signal status shows 0db noise 0db. Wireless devices would properly show the SSID however unable to join. Even with No encryption. The system log would even show that radio0 is up.
Steps done:
- Reboot Router
- Re-flash firmware
- Manually set WiFi config: Band 20mhz or 40mhz.
- Toggled between N and Legacy.
- Manually set WiFi channels.
- Tried different encryption.

Additional information:
- I am well aware that this router support is still WIP as stated: https://lede-project.org/toh/hwdata/asus/asus_rt-n12 Basically just putting out this bug report since so far everything seemed fine except for wireless broadcast.
- Used latest snapshot build from downloads page dated: Thu Jan 25 12:07:37 2018

08.11.20171158Base systemBug ReportVery LowCriticalATH10k QCA9880 5 Ghz mixed mode (sta and ap) not possib...TrunkUnconfirmed Task Description
 
Hardware: Archer C7 V2
Software: Trunk (r5280)

Using the 5 Ghz radio in accesspoint mode (mode ap) and client mode (mode sta) at the same time doesnt work.
Only client mode works.
No error messages will be generated.
With version V17.01.4 all is fine (same configuration).

Config details:

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11a'
	option path 'pci0000:01/0000:01:00.0'
	option noscan '1'
	option htmode 'VHT80'
	option multicast_querier '0'
	option igmp_snooping '0'
	option distance '8'
	option log_level '3'
	option compression '1'
	option bursting '1'
	option ff '1'
	option country 'US'
	option txpower '23'
	option channel '112'

config wifi-device 'radio1'
	option type 'mac80211'
	option hwmode '11g'
	option path 'platform/qca955x_wmac'
	option noscan '1'
	option htmode 'HT40'
	option distance '15'
	option multicast_querier '0'
	option igmp_snooping '0'
	option log_level '3'
	option compression '1'
	option bursting '1'
	option ff '1'
	option channel '9'
	option country 'US'
	option txpower '24'
	option disabled '0'

config wifi-iface
	option encryption 'psk2'
	option device 'radio0'
	**option mode 'sta'**
	option bssid '08:96:D7:7B:89:BA'
	option key 'xxxxxxxxxxxxxxxxxxxxxx'
	option multicast_querier '0'
	option igmp_snooping '0'
	option ssid 'Fritz_5Ghz'
	option network 'WWAN WWAN6'

config wifi-iface
	option ssid 'im6shop'
	option device 'radio1'
	option key 'xxxxxxxxxxxxxxxxxxxxxx'
	option multicast_querier '0'
	option igmp_snooping '0'
	option network 'LAN'
	option mode 'ap'
	option encryption 'psk2'

config wifi-iface
	option device 'radio0'
	**option mode 'ap'**
	option key 'xxxxxxxxxxxxxxxxxxxxxx'
	option macfilter 'allow'
	list maclist '78:0C:B8:8A:12:45'
	list maclist '88:32:9B:F6:70:79'
	list maclist 'F0:27:65:7F:7A:19'
	option encryption 'psk2+ccmp'
	option network 'LAN'
	option ssid 'im6shop'

If you need further details, let me know

regards Klaus


02.11.20171139KernelBug ReportVery LowCriticalKernel crashTrunkUnconfirmed Task Description

Router stop working and all network drop requiring a router restart.
TP-Link TL-WDR4300 v1
LEDE Reboot SNAPSHOT r5217-098afa1e1b / LuCI Master (git-17.302.29094-87ec343)
Kernel - 4.9.58

Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.711795] ------------[ cut here ]------------
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.716575] WARNING: CPU: 0 PID: 0 at net/netfilter/nf_conntrack_rtcache.c:199 0x874673e0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.724867] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_netlink nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_string xt_state xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_LOG usbmon ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom umWed Nov  1 20:06:44 2017 kern.warn kernel: [11503.797335]  nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos vfat fat nls_utf8 nls_iso8859_1 nls_cp437 usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.820374] CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.58 #0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.826199] Stack : 804d78fa 00000031 00000000 00000001 804615d4 80461247 8041396c 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.834743]         804d3a40 000000c7 00000003 00000000 02080020 800a9b84 8041919c 80460000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.843287]         00000003 000000c7 8041736c 87c09824 02080020 800d923c 804d78fa 0000004d
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.851832]         00000000 80223000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.860377]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.868922]         ...
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.871414] Call Trace:
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.873905] [<8006b2e8>] show_stack+0x54/0x88
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.878362] [<80080530>] __warn+0xe4/0x118
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.882529] [<800805f8>] warn_slowpath_null+0x1c/0x34
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.887684] [<874673e0>] 0x874673e0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.891231] ---[ end trace 0fa0ed456ba22a7d ]---
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.896865] ------------[ cut here ]------------
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.901621] WARNING: CPU: 0 PID: 0 at net/netfilter/nf_conntrack_rtcache.c:199 0x874673e0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.909943] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_netlink nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_string xt_state xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_LOG usbmon ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom umWed Nov  1 20:06:44 2017 kern.warn kernel: [11503.982364]  nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos vfat fat nls_utf8 nls_iso8859_1 nls_cp437 usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.005412] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.9.58 #0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.012478] Stack : 804d78fa 0000003f 00000000 00000001 804615d4 80461247 8041396c 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.021029]         804d3a40 000000c7 00000003 00000000 02080020 800a9b84 8041919c 80460000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.029575]         00000003 000000c7 8041736c 87c09824 02080020 800d923c 804d78fa 0000004d
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.038119]         804736b0 80223000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.046664]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.055200]         ...
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.057701] Call Trace:
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.060191] [<8006b2e8>] show_stack+0x54/0x88
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.064636] [<80080530>] __warn+0xe4/0x118
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.068811] [<800805f8>] warn_slowpath_null+0x1c/0x34
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.073951] [<874673e0>] 0x874673e0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.077506] ---[ end trace 0fa0ed456ba22a7e ]---
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.150414] ------------[ cut here ]------------
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.155176] WARNING: CPU: 0 PID: 0 at net/netfilter/nf_conntrack_rtcache.c:199 0x874673e0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.163513] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_netlink nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_string xt_state xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_LOG usbmon ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom umWed Nov  1 20:06:44 2017 kern.warn kernel: [11504.235935]  nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos vfat fat nls_utf8 nls_iso8859_1 nls_cp437 usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.258985] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.9.58 #0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.266041] Stack : 804d78fa 0000003f 00000000 00000001 804615d4 80461247 8041396c 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.274584]         804d3a40 000000c7 00000003 00000000 02080020 800a9b84 8041919c 80460000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.283129]         00000003 000000c7 8041736c 87c09824 02080020 800d923c 804d78fa 0000004d
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.291682]         804736b0 80223000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.300237]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.308780]         ...
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.311272] Call Trace:
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.313764] [<8006b2e8>] show_stack+0x54/0x88
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.318220] [<80080530>] __warn+0xe4/0x118
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.322380] [<800805f8>] warn_slowpath_null+0x1c/0x34
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.327535] [<874673e0>] 0x874673e0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.331081] ---[ end trace 0fa0ed456ba22a7f ]---
21.10.20171094Base systemBug ReportVery LowCriticalno connection on any ethernet ports (incl internet) on ...TrunkUnconfirmed Task Description

Yesterday I upgraded the Linksys wrt1200ac from openwrt 15.05.1
to lede-17.01.4. The upgrade was done through a luci web
interface.

After reboot the wan connection was gone, as well as all local
ethernet ports. Wifi continued to work fine. The configuration
seems to have survived the upgrade. I couldn’t find anything
wrong with the configuration.

On the Internet port there were no packets coming in. On the
ethernet port 1 there are bootp/dhcp requests coming from the
router.

Not sure if that is relevant, but reverting back to 15.05.1
didn’t work either: the router is currently completely
inaccessible. I don’t have a serial cable, will probably order
one to try to debrick the thing.

19.10.20171085KernelBug ReportVery LowCriticalStreaming ieee80211 cmd timeouts followed by crashTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: Linksys WRT3200ACM
- Software versions of LEDE release, packages, etc.: LEDE Reboot SNAPSHOT r5096-a29848c / LuCI Master (git-17.260.43176-678c15c)

Router had been up for less than 24 hours from last crash. Started streaming the following errors in syslog:

Thu Oct 19 16:50:41 2017 kern.err kernel: [82666.284359] ieee80211 phy0: cmd 0×9122=UpdateEncryption timed out
Thu Oct 19 16:50:41 2017 kern.err kernel: [82666.290490] ieee80211 phy0: return code: 0×1122 Thu Oct 19 16:50:41 2017 kern.err kernel: [82666.295069] ieee80211 phy0: timeout: 0×1122 Thu Oct 19 16:50:41 2017 kern.err kernel: [82666.299280] wlan0: failed to set key (0, e0:b5:2d:xx:xx:xx) to hardware (-5)
Thu Oct 19 16:50:41 2017 daemon.notice hostapd: wlan0: AP-STA-CONNECTED e0:b5:2d:xx:xx:xx
Thu Oct 19 16:50:45 2017 kern.err kernel: [82670.356504] ieee80211 phy0: cmd 0x801d=MEMAddrAccess timed out
Thu Oct 19 16:50:45 2017 kern.err kernel: [82670.362367] ieee80211 phy0: return code: 0x051d
Thu Oct 19 16:50:45 2017 kern.err kernel: [82670.366924] ieee80211 phy0: timeout: 0x001d
Thu Oct 19 16:50:49 2017 kern.err kernel: [82674.372313] ieee80211 phy0: cmd 0x801d=MEMAddrAccess timed out
Thu Oct 19 16:50:49 2017 kern.err kernel: [82674.378197] ieee80211 phy0: return code: 0x001d
Thu Oct 19 16:50:49 2017 kern.err kernel: [82674.382749] ieee80211 phy0: timeout: 0x001d

Interspersed with these messages were a few:
Thu Oct 19 16:52:43 2017 daemon.notice hostapd: nl80211: nl80211_recv_beacons→nl_recvmsgs failed: -5

These then started showing up:
Thu Oct 19 16:54:56 2017 daemon.notice netifd: wan6 (1414): Command failed: Request timed out

Then a handful of these:
Thu Oct 19 16:56:00 2017 kern.err kernel: [82985.426468] ieee80211 phy0: cmd 0×9143=GetSeqno timed out
Thu Oct 19 16:56:00 2017 kern.err kernel: [82985.431902] ieee80211 phy0: return code: 0×1143 Thu Oct 19 16:56:00 2017 kern.err kernel: [82985.436450] ieee80211 phy0: timeout: 0×1143

Followed by this, including a crash:
Thu Oct 19 16:56:36 2017 kern.err kernel: [83021.558164] wlan0: failed to remove key (0, 78:7e:61:xx:xx:xx) from hardware (-5)
Thu Oct 19 16:56:36 2017 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED e0:b5:2d:2a:89:30
Thu Oct 19 16:56:36 2017 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED dc:41:5f:b9:0d:ba
Thu Oct 19 16:56:40 2017 kern.err kernel: [83025.588715] ieee80211 phy0: cmd 0×9122=UpdateEncryption timed out
Thu Oct 19 16:56:40 2017 kern.err kernel: [83025.594898] ieee80211 phy0: return code: 0×1122 Thu Oct 19 16:56:40 2017 kern.err kernel: [83025.599463] ieee80211 phy0: timeout: 0×1122 Thu Oct 19 16:56:40 2017 kern.err kernel: [83025.603666] wlan0: failed to remove key (0, dc:41:5f:xx:xx:xx) from hardware (-5)
Thu Oct 19 16:56:44 2017 kern.err kernel: [83029.646987] ieee80211 phy0: cmd 0×9125=BAStream timed out
Thu Oct 19 16:56:44 2017 kern.err kernel: [83029.652419] ieee80211 phy0: return code: 0×1125 Thu Oct 19 16:56:44 2017 kern.err kernel: [83029.656973] ieee80211 phy0: timeout: 0×1125 Thu Oct 19 16:56:48 2017 kern.err kernel: [83033.654789] ieee80211 phy0: cmd 0×9125=BAStream timed out
Thu Oct 19 16:56:48 2017 kern.err kernel: [83033.660221] ieee80211 phy0: return code: 0×1125 Thu Oct 19 16:56:48 2017 kern.err kernel: [83033.664769] ieee80211 phy0: timeout: 0×1125 Thu Oct 19 16:56:52 2017 kern.err kernel: [83037.666085] ieee80211 phy0: cmd 0×9125=BAStream timed out
Thu Oct 19 16:56:52 2017 kern.err kernel: [83037.671519] ieee80211 phy0: return code: 0×1125 Thu Oct 19 16:56:52 2017 kern.err kernel: [83037.676066] ieee80211 phy0: timeout: 0×1125

Thu Oct 19 16:56:52 2017 kern.alert kernel: [83037.680345] Unable to handle kernel NULL pointer dereference at virtual address 0000000c
Thu Oct 19 16:56:52 2017 kern.alert kernel: [83037.688494] pgd = d303c000
Thu Oct 19 16:56:53 2017 kern.alert kernel: [83037.691221] [0000000c] *pgd=1369c831, *pte=00000000, *ppte=00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.697545] Internal error: Oops: 17 [#1] SMP ARM
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.702266] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CLASSIFY slhc rfcomm nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipvThu Oct 19 16:56:53 2017 kern.warn kernel: [83037.774820] ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables tun regmap_mmio ecb cmac uhci_hcd ohci_platform ohci_hcd gpio_button_hotplug
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.812372] CPU: 1 PID: 3044 Comm: hostapd Not tainted 4.9.54 #0
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.818403] Hardware name: Marvell Armada 380/385 (Device Tree)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.824346] task: df564e40 task.stack: d3718000
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.828909] PC is at mwl_fwcmd_destroy_ba+0×98/0xf4 [mwlwifi]
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.834683] LR is at mwl_fwcmd_destroy_ba+0×34/0xf4 [mwlwifi]
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.840451] pc : [<bf18a624>] lr : [<bf18a5c0>] psr: 60000013
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.840451] sp : d3719c90 ip : 00000000 fp : 00000000
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.851975] r10: dde78000 r9 : dde78048 r8 : dde78054
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.857220] r7 : ddfc1620 r6 : ddfc2924 r5 : 00000000 r4 : ddcb0000
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.863771] r3 : 00000000 r2 : 00000002 r1 : 00000000 r0 : 00000000
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.870324] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.877487] Control: 10c5387d Table: 1303c04a DAC: 00000051
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.883255] Process hostapd (pid: 3044, stack limit = 0xd3718210)
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.889372] Stack: (0xd3719c90 to 0xd371a000)
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.893745] 9c80: dde78054 00000007 d8008de8 ddfc45e0
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.901957] 9ca0: ddfc0be0 bf18aac8 d8008de8 ddfc1620 ddfc0be0 d3c51e14 d36b9ce0 de7e0000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.910168] 9cc0: 00000014 bf185b94 d8008800 00000002 00000001 d3c51e14 d81f5e40 de7e0000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.918379] 9ce0: 00000014 bf118c98 ddfc0be0 d36b94c0 d8008800 bf11b2dc 00000002 00000002
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.926589] 9d00: d8008800 ddfc0be0 d36b94c0 bf11c270 d8008800 00000000 00000000 d8008800
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.934800] 9d20: d3c51e20 bf11c3bc d36b94c0 00000454 d3c51e20 bf11c434 ddfc0000 d36b9000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.943012] 9d40: d3719d68 bf0e38e4 d3c51e20 0002000c 00000000 bf0ff534 bf108c84 c03c0e1c
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.951223] 9d60: bf0fee9a 80150014 59e7e961 0000068e d3c51e00 d3c51e10 d3c51e14 de7e0000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.959434] 9d80: ddfc0000 d36b9000 d3c51e00 d81f5e40 c03c0b94 d3475c00 d3719dcc 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.967645] 9da0: 00000008 c03c01d0 c0629cb0 d81f5e40 d81f5e40 c03c0b80 df4ba400 00000028
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.975857] 9dc0: d81f5e40 c03bfbd4 d3475c00 7fffffff 00000000 d81f5e40 00000000 d3719f68
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.984068] 9de0: 00000028 d3475c00 00000000 c03c0040 00000000 c021cb0c 00000028 d0851040
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.992278] 9e00: 00000000 00000be4 00000000 00000000 00000001 d3719f68 00000000 d3719e8c
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.000489] 9e20: df30f200 00000000 c0604fc8 00000000 00000000 c0380060 d3719f68 c03805f0
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.008701] 9e40: 00000000 00000000 00000000 00376010 00000028 beadcbec 00000000 d3719eb4
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.016912] 9e60: df30f200 c03807e8 c05ffec0 00000000 beadcc54 0038a030 00004000 c004f000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.025124] 9e80: dfbd2ef0 ffffffff e813b2d8 c0628400 d3719ecc 00000051 00008933 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.033334] 9ea0: 00000000 beadcc8c 00000020 00000010 00000000 00000000 00000000 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.041545] 9ec0: dfbd2ef0 c0605998 c05ffec0 6e616c77 d32552c0 60000013 df569500 d3255080
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.049755] 9ee0: 00000000 d3255080 d0029b20 c00f188c d0029b84 00000007 00000000 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.057966] 9f00: df564e40 c005aae0 d3719f08 d3719f08 df401180 d0029b00 df29dc38 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.066177] 9f20: df401580 df29dc38 df29dc38 00040936 d0029b20 df30f200 beadcc70 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.074388] 9f40: 00000128 c000ef04 d3718000 00000000 b6e9c740 c038138c 00000000 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.082599] 9f60: 00000000 fffffff7 d3719eac 0000000c 00000001 00000000 00000000 d3719e54
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.090809] 9f80: 00000000 00000006 00000000 00000000 00000000 00000000 00000000 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.099021] 9fa0: b6f1610c c000ed40 00000000 00000000 00000005 beadcc70 00000000 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.107231] 9fc0: 00000000 00000000 b6f1610c 00000128 b6e9cef0 00000000 0002516c b6e9c740
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.115443] 9fe0: beadcc18 beadcc04 b6eececc b6eec398 60000010 00000005 00000000 00000000
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.123678] [<bf18a624>] (mwl_fwcmd_destroy_ba [mwlwifi]) from [<bf18aac8>] (mwl_fwcmd_del_sta_streams+0x1d4/0×330 [mwlwifi])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.135037] [<bf18aac8>] (mwl_fwcmd_del_sta_streams [mwlwifi]) from [<bf185b94>] (mwl_mac80211_sta_remove+0×38/0x1c4 [mwlwifi])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.146598] [<bf185b94>] (mwl_mac80211_sta_remove [mwlwifi]) from [<bf118c98>] (drv_sta_state+0x16c/0×184 [mac80211])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.157290] [<bf118c98>] (drv_sta_state [mac80211]) from [<bf11b2dc>] (sta_info_move_state+0xbc/0x1d0 [mac80211])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.167629] [<bf11b2dc>] (sta_info_move_state [mac80211]) from [<bf11c270>] (sta_set_sinfo+0×954/0xa80 [mac80211])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.178054] [<bf11c270>] (sta_set_sinfo [mac80211]) from [<bf11c3bc>] (sta_info_destroy+0×20/0×28 [mac80211])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.188218] [<bf11c3bc>] (
sta_info_destroy [mac80211]) from [<bf11c434>] (sta_info_destroy_addr_bss+0x2c/0×44 [mac80211])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.199429] [<bf11c434>] (sta_info_destroy_addr_bss [mac80211]) from [<bf0e38e4>] (nl80211_del_station+0xe8/0xf0 [cfg80211])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.210711] [<bf0e38e4>] (nl80211_del_station [cfg80211]) from [<c03c0e1c>] (genl_rcv_msg+0×288/0×310)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.220059] [<c03c0e1c>] (genl_rcv_msg) from [<c03c01d0>] (netlink_rcv_skb+0×58/0xb4)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.227922] [<c03c01d0>] (netlink_rcv_skb) from [<c03c0b80>] (genl_rcv+0×20/0×34)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.235436] [<c03c0b80>] (genl_rcv) from [<c03bfbd4>] (netlink_unicast+0×138/0x1fc)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.243124] [<c03bfbd4>] (netlink_unicast) from [<c03c0040>] (netlink_sendmsg+0x2f0/0×310)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.251425] [<c03c0040>] (netlink_sendmsg) from [<c0380060>] (sock_sendmsg+0×14/0×24)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.259287] [<c0380060>] (sock_sendmsg) from [<c03805f0>] (_sys_sendmsg+0×184/0×228)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.267238] [<c03805f0>] (
_sys_sendmsg) from [<c038138c>] (sys_sendmsg+0×40/0×64)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.275104] [<c038138c>] (
sys_sendmsg) from [<c000ed40>] (ret_fast_syscall+0×0/0x3c)
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.283055] Code: e5840010 e5d81004 e5c41014 e598c000 (e59c300c)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.289200] —[ end trace 6c4677423c79f036 ]—

18.10.20171074Base systemBug ReportVery LowCriticalNETDEV WATCHDOG: wlan2 (mwifiex_sdio): transmit queue 1...TrunkUnconfirmed Task Description

- Device problem occurs on: WRT3200ACM
- Software versions of LEDE release, packages, etc.: LEDE Reboot SNAPSHOT r5096-a29848c / LuCI Master (git-17.260.43176-678c15c)
- Steps to reproduce: I’ve been consistently having problems with wlan2 going offline after the router has been up for a day or so, but just stumbled across this in dmesg. I’ll see if I can figure out the circumstances leading to it.

 

[85338.316517] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x1b4/0×234 [85338.324820] NETDEV WATCHDOG: wlan2 (mwifiex_sdio): transmit queue 1 timed out
[85338.331987] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CLASSIFY slhc rfcomm nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack mwifiex_sdio mwifiex iptable_mangle iptable_filter ipt_ECN ip_tables hidp hci_uart crc_ccitt btusb btmrvl_sdio btmrvl btintel bnep bluetooth hid evdev input_core mwlwifi mac80211 cfg80211 compat xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport
[85338.404541] ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables tun regmap_mmio ecb cmac uhci_hcd ohci_platform ohci_hcd gpio_button_hotplug
[85338.442106] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.9.54 #0
[85338.448049] Hardware name: Marvell Armada 380/385 (Device Tree)
[85338.454003] [<c0016010>] (unwind_backtrace) from [<c0012220>] (show_stack+0×10/0×14)
[85338.461782] [<c0012220>] (show_stack) from [<c020c1a0>] (dump_stack+0x7c/0x9c)
[85338.469036] [<c020c1a0>] (dump_stack) from [<c0029218>] (warn+0xbc/0xec)
[85338.475939] [<c0029218>] (
warn) from [<c002927c>] (warn_slowpath_fmt+0×34/0×44)
[85338.483455] [<c002927c>] (warn_slowpath_fmt) from [<c03b6c38>] (dev_watchdog+0x1b4/0×234)
[85338.491661] [<c03b6c38>] (dev_watchdog) from [<c006ffe8>] (call_timer_fn+0×20/0×94)
[85338.499349] [<c006ffe8>] (call_timer_fn) from [<c0070220>] (run_timer_softirq+0x1c4/0×200)
[85338.507650] [<c0070220>] (run_timer_softirq) from [<c002d2b4>] (do_softirq+0xd0/0×204)
[85338.515775] [<c002d2b4>] (
do_softirq) from [<c002d66c>] (irq_exit+0×94/0xb8)
[85338.523029] [<c002d66c>] (irq_exit) from [<c0061e04>] (handle_domain_irq+0×90/0xb4)
[85338.530892] [<c0061e04>] (
handle_domain_irq) from [<c0009428>] (gic_handle_irq+0×50/0×94)
[85338.539277] [<c0009428>] (gic_handle_irq) from [<c0012c8c>] (irq_svc+0x6c/0×90)
[85338.546789] Exception stack(0xdf475f90 to 0xdf475fd8)
[85338.551860] 5f80: 00000001 00000000 00000000 c001b1c0
[85338.560071] 5fa0: 00000000 df474000 c0604fe4 00000002 c05ff168 00000000 df475fe8 00000001
[85338.568282] 5fc0: 00000000 df475fe0 c000f808 c000f80c 60000013 ffffffff
[85338.574925] [<c0012c8c>] (
irq_svc) from [<c000f80c>] (arch_cpu_idle+0x2c/0×38)
[85338.582355] [<c000f80c>] (arch_cpu_idle) from [<c005b154>] (cpu_startup_entry+0xf0/0x19c)
[85338.590567] [<c005b154>] (cpu_startup_entry) from [<000095ac>] (0x95ac)
[85338.597214] —[ end trace 7ee504210e2aead0 ]— [85338.601865] mwifiex_sdio mmc0:0001:1: 8504333 : Tx timeout(#1), bss_type-num = 1-0
[85344.871433] mwifiex_sdio mmc0:0001:1: 8504960 : Tx timeout(#2), bss_type-num = 1-0
[85350.631045] mwifiex_sdio mmc0:0001:1: 8505536 : Tx timeout(#3), bss_type-num = 1-0
[85356.400657] mwifiex_sdio mmc0:0001:1: 8506113 : Tx timeout(#4), bss_type-num = 1-0
[85366.309996] mwifiex_sdio mmc0:0001:1: 8507104 : Tx timeout(#5), bss_type-num = 1-0
[85376.309327] mwifiex_sdio mmc0:0001:1: 8508104 : Tx timeout(#6), bss_type-num = 1-0
[85386.318652] mwifiex_sdio mmc0:0001:1: 8509105 : Tx timeout(#7), bss_type-num = 1-0
[85386.326257] mwifiex_sdio mmc0:0001:1: tx_timeout_cnt exceeds threshold. Triggering card reset!
[85386.356950] mwifiex_sdio mmc0:0001:1: info: shutdown mwifiex...
[85386.362967] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.368924] mwifiex_sdio mmc0:0001:1: Failed to delete mgmt IEs!
[85386.374978] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.380928] mwifiex_sdio mmc0:0001:1: Failed to stop the BSS
[85386.387009] br-lan: port 4(wlan2) entered disabled state
[85386.394495] device wlan2 left promiscuous mode
[85386.398975] br-lan: port 4(wlan2) entered disabled state
[85386.404593] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.410562] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.416507] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.603147] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
[85386.610161] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[85396.707953] mwifiex_sdio mmc0:0001:1: mwifiex_cmd_timeout_func: Timeout cmd id = 0xa9, act = 0×0 [85396.716787] mwifiex_sdio mmc0:0001:1: num_data_h2c_failure = 0
[85396.722652] mwifiex_sdio mmc0:0001:1: num_cmd_h2c_failure = 0
[85396.728423] mwifiex_sdio mmc0:0001:1: is_cmd_timedout = 1
[85396.733842] mwifiex_sdio mmc0:0001:1: num_tx_timeout = 0
[85396.739178] mwifiex_sdio mmc0:0001:1: last_cmd_index = 3
[85396.744512] mwifiex_sdio mmc0:0001:1: last_cmd_id: b3 00 b3 00 b2 00 a9 00 b3 00
[85396.751940] mwifiex_sdio mmc0:0001:1: last_cmd_act: 00 00 00 00 00 00 00 00 00 00
[85396.759457] mwifiex_sdio mmc0:0001:1: last_cmd_resp_index = 2
[85396.765225] mwifiex_sdio mmc0:0001:1: last_cmd_resp_id: b3 80 b3 80 b2 80 b3 80 b3 80
[85396.773093] mwifiex_sdio mmc0:0001:1: last_event_index = 2
[85396.778603] mwifiex_sdio mmc0:0001:1: last_event: 37 00 55 00 43 00 55 00 55 00
[85396.785944] mwifiex_sdio mmc0:0001:1: data_sent=1 cmd_sent=1
[85396.791630] mwifiex_sdio mmc0:0001:1: ps_mode=0 ps_state=0
[85396.797372] mwifiex_sdio mmc0:0001:1: info: _mwifiex_fw_dpc: unregister device

24.05.2017801Base systemBug ReportVery LowCriticalR7800 wifi crashingTrunkUnconfirmed Task Description

- Device problem occurs on: Netgear Nighthawk X4S R7800
- Software versions of LEDE release, packages, etc.: LEDE Reboot SNAPSHOT r4173-5d48dc1146 / LuCI Master (git-17.141.68918-5ca3864)
- Steps to reproduce
Boot device, wait for it to crash within 24hours

The paste ending in Hn was recorder after wifi stopped working and i turned wifi off and on.
The paste ending in Wu happend about 30 minutes after that and could only be resolved by rebooting the device.

 


11.05.2017775Base systemBug ReportVery LowCriticalflashing kirkwood u-boot page not aligned [Zyxel NSA-32...TrunkUnconfirmed Task Description

[code]/e-data/4089-AD8E/tools # flash_erase /dev/mtd0 0 4
Erasing 128 Kibyte @ 60000 – 100 % complete[/code]

now when I flash the LEDE uboot I get this

[code]/e-data/4089-AD8E # nandwrite /dev/mtd0 kirkwood/generic/u-boot-nsa325/u-boot.kwb
Input file is not page aligned Data did not fit into device, due to bad blocks
: Success[/code]

the expected should be
[code]/ # nandwrite /dev/mtd0 /e-data/4089-AD8E/uboot.2016.05-tld-1.nsa325.mtd0.kwb
Writing data to block 0 at offset 0×0 Writing data to block 1 at offset 0×20000 Writing data to block 2 at offset 0×40000 Writing data to block 3 at offset 0×60000[/code]

now I can’t even turn off my device. Hopeful to be resolve asap.

10.02.2017494Base systemBug ReportVery LowCriticalNETDEV WATCHDOG: ptm0 (): transmit queue 0 timed outAllNew Task Description

I have a VDSL line with Plusnet (UK) - the connection is pppoe - ptm0.101. With the supplied modem/router the line and connection is stable with no disconnects. With LEDE the connection is established and works well until it disconnects (sometimes as early as few minutes other times it stays connected up to an hour). After the disconnect there is no reconnection until a reboot. Restarting wan interface (ifdown wan/ifup wan) or dsl connection (/etc/init.d/dslcontrol stop/start) does not help.

Supply the following if possible:
- Device problem occurs on TP-w8970 and BTHomehub 5A (same crash on both lantiq based devices)
- Software versions of LEDE release, packages, etc. Tested on LEDE RC2, earlier LEDE snapshot from October 2016, Openwrt CC - same symptoms
- Steps to reproduce - VDSL connection on ptm0.101 via pppoe

Here is a trace of the crash (dmesg):

[ 1414.124413] —[ beginning trace ff034b465cdad16b ]— [ 1414.125631] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:303 dev_watchdog+0x1a8/0x2f0()
[ 1414.126471] NETDEV WATCHDOG: ptm0 (): transmit queue 0 timed out
[ 1414.132456] Modules linked in: ltq_ptm_vr9 option iptable_nat ath9k usb_wwan rt2800usb rt2800lib
pppoe nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 l2tp_ppp ipt_REJECT ipt_MASQUERADE ath9k_common
xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_policy xt_nat xt_multiport xt_mark xt_mac
xt_limit xt_length xt_id xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit
xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY usbserial rt2x00usb
rt2x00lib pppox ppp_async nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6
nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack ltq_deu_vr9 iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN
ip_tables crc_itu_t crc_ccitt cdc_acm ath9k_hw ath10k_pci ath10k_core ath mac80211 cfg80211 compat drv_dsl_cpe_api
drv_mei_cpe xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net
ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark
ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6
nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables pppoatm ppp_generic slhc
l2tp_ip6 l2tp_ip l2tp_eth sit l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel ipcomp xfrm4_tunnel xfrm4_mode_tunnel
xfrm4_mode_transport xfrm4_mode_beet esp4 ah4 tunnel4 ip_tunnel tun af_key xfrm_user xfrm_ipcomp xfrm_algo br2684 atm
drv_ifxos echainiv sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac des_generic cbc authenc usb_storage
dwc2 uhci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache aead crypto_null
[ 1414.287462] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.7 #1
[ 1414.293130] Stack : 804b0000 00000001 00000000 00000000 805172b8 80516f43 80489a24 00000000
[ 1414.293130] 80673844 00010000 80510000 805159bc 80515abc 80055664 00000003 80510000
[ 1414.293130] 80491b4c 00000000 8048ff50 80511c44 80515abc 800535b0 00000006 00000001
[ 1414.293130] 00000000 80512000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1414.293130] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1414.293130] ...
[ 1414.328618] Call Trace:
[ 1414.331095] [<800178a8>] show_stack+0×50/0×84 [ 1414.335454] [<8002af48>] warn_slowpath_common+0xa0/0xd0
[ 1414.340670] [<8002afa4>] warn_slowpath_fmt+0x2c/0×38 [ 1414.345636] [<802e637c>] dev_watchdog+0x1a8/0x2f0
[ 1414.350348] [<8005f7b0>] call_timer_fn.isra.5+0×24/0×80 [ 1414.355557] [<8005fa2c>] run_timer_softirq+0x1a4/0×208 [ 1414.360694] [<8002de80>] __do_softirq+0×298/0x2b0
[ 1414.365388] [<80002430>] ret_from_irq+0×0/0×4 [ 1414.369760] [<80013a8c>] r4k_wait_irqoff+0×18/0×20 [ 1414.374528] [<8004ff6c>] cpu_startup_entry+0xa4/0xf8
[ 1414.379508] [<80539bf8>] start_kernel+0×474/0×494 [ 1414.384180]
[ 1414.385631] —[ end trace ff034b465cdad16b ]—

 


10.08.201684Base systemBug ReportVery LowCriticalsysntp does not resolves IPv6 when IPv6 only stackTrunkUnconfirmed Task Description

sysntp (busybox ntp) does not resolve IPv6 addresses when the machine is IPv6 stack based only.

proposed solution exist:

https://dev.openwrt.org/attachment/ticket/12167/0001-busybox-make-ntpd-prefer-IPv6-addresses.patch

http://lists.busybox.net/pipermail/busybox/2016-August/084529.html

Already reported in

https://github.com/lede-project/source/issues/249

04.03.20213662Base systemBug ReportVery LowHighParameters aren't passed to kernel modules at bootTrunkUnconfirmed Task Description

I have a D-Link DIR-882 A1 router (MT7621 + 2x MT7615N, 128 MB of RAM, 16 MB of NOR flash) running OpenWrt SNAPSHOT r16087-1d412235a5 (built on March 4, 2021) and I need to pass quirks=0bc2:231a:u parameter to the usb-storage module at boot in order to skip loading of the UAS driver, which is currently broken on the xhci-mtk driver this router uses (as reported here, here, here and on various topics on the OpenWrt Forums), and prevents an external USB 3.0 HDD I have to work with it.

Accordingly to several sources, this should be easily accomplished by writing usb-storage quirks=<vid>:<pid>:u on a single line into /etc/modules.d/usb-storage, however, the specified parameter is ignored and never reaches the kernel module, as running cat /sys/module/usb_storage/parameters/quirks after boot is complete returns empty. I also found this thread, dating back to 2018, with other users having the same issue, and which also seems to confirm that adding the kernel module parameters to the corresponding file under /etc/modules.d is how it’s supposed to work, but it simply doesn’t.

The only workaround I found so far is running echo “0bc2:231a:u” > /sys/module/usb_storage/parameters/quirks after booting, but then I need to physically unplug and re-plug the HDD for the changes to take effect, this also needs to be done every time the router powers on, which is very annoying. Other things I tried includes creating /etc/modprobe.d/usb-storage.conf with options usb-storage quirks=<vid>:<pid>:u and also unloading (and ever completely removing) kmod-usb-storage-uas from the device, but none of that worked.

So, is there any other mechanism for passing parameters to kernel modules at boot time? As far as I searched, /etc/modules.d seems to be the only one, but it’s broken...

27.02.20213645Base systemBug ReportVery LowHighStateful DHCPv6 bugTrunkUnconfirmed Task Description

If the firmware compiled with the current source code uses Stateful DHCPv6, the IPv6 address cannot be obtained, but the DNS can be obtained. Please fix it.

25.02.20213641OtherBug ReportVery LowHighNew D-Link bootloader (for DIR-2660 and possibly others...TrunkUnconfirmed Task Description

It seems that some D-Link devices require additional header values in order to flash it via the recovery and to upgrade existing installs. The older versions of the DIR-2660 A1 could be flashed with the current OpenWrt snapshot.

The latest batch of DIR-2660 devices, and possibly others, come with a new bootloader that requires some additional header fields to be set. Manually changing the headers of the factory and upgrade files, allows them to flash succesfully;

you can edit one your self if you like
add "DIR-2660" text at address 0x40 hex
add "V1.00000" text at address 0x80 hex
add "A1" text at address 0x90 hex
change bytes 0x04 to 0x07 to 00
create crc32 for bytes 0x0 to 0x9F
place result in bytes 0x04 to 0x07

This is discussed in https://forum.openwrt.org/t/d-link-dir-2660-a2/89507/11 and https://forum.openwrt.org/t/dir-2660-dir-1935-dir-882-how-to-safely-install-openwrt/88697/10.

24.02.20213639Base systemBug ReportVery LowHighRepeated failure of wireless interfaces, seemingly rela...TrunkUnconfirmed Task Description

Supply the following if possible:



Model: Linksys WRT3200ACM
Architecture: ARMv7 Processor rev 1 (v7l)
Firmware Version: OpenWrt 19.07.7 r11306-c4a6851c72 / LuCI openwrt-19.07 branch git-21.054.03371-3b137b5
Kernel Version: 4.14.221

In the last four to six days the wireless on my network kept failing (particularly overnight - but that may be less to do with time of day and more to do with lease expiry??). I searched and found that someone else resolved this back in around 2018 by enabling IGMP Snooping and then rebooting their router (https://forum.openwrt.org/t/wifi-up-device-connected-but-no-internet/) - That worked for me but only temporarily. This morning, even though (on LuCI and via SSH) I can see IGMP Snooping is still enabled (LAN interface), the same problem occurred - all the wireless devices can connect to the router but not the Internet. For the moment, rebooting the router fixed it but clearly that’s not a realistic solution.

I have marked this high severity because:

- It looks like a regression
- My kids can't access school via their iPads and are getting marked absent! (like many/most, we're in lockdown)

`/etc/config/network` reads:

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fddf:17c3:6271::/48'

config interface 'lan'
        option type 'bridge'
        option ifname 'eth0.1'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option broadcast '192.168.7.255'
        option ipaddr '192.168.7.1'
        option gateway '****'  <- my WAN static IP
        list dns '1.1.1.1'
        option igmp_snooping '1' <- I set this, which seemed to resolve it, but only for a bit

config interface 'wan'
        option ifname 'eth1.2'
        option proto 'pppoe'
        option password '****'
        option ipv6 'auto'
        option username '****'

config interface 'wan6'
        option ifname 'eth1.2'
        option proto 'dhcpv6'

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '0 1 2 3 5t'

config switch_vlan
        option device 'switch0'
        option vlan '2'
        option ports '4 6t'

config interface 'wwan'
        option proto 'dhcp'
11.02.20213620Base systemBug ReportVery LowHighRemote desktop unusable with software flow offloadingopenwrt-19.07Unconfirmed Task Description

I have latest stable OpenWrt 19.07.6 r11278 installed to my TP-Link TL-WDR4900 v1.
I have a port forward to a Windows RDP or using TeamViewer remote management.
When the Software flow offloading ENABLED, Windows RDP or TeamViewer remote management connection become slow and laggy.

If I disable everything works quickly without lags.

 


10.02.20213617Base systemBug ReportVery LowHighntpd-busybox default doesn't work with /etc/config/syst...openwrt-19.07Unconfirmed Task Description

19.07.4

Specify no busybox options in menuconfig and include an /etc/config/system ntp configuration in buildroot/files/

NTP doesn’t work, even though ntp exists via busybox. If you call ntpd and tell it to query a nameserver directly, it does get a result and set the time.

You must install ntpd, it should automatically work with busybox’s ntpd.

Bringing in ntpd also brings in:

CONFIG_PACKAGE_libmbedtls=y
# CONFIG_LIBMBEDTLS_DEBUG_C is not set
# CONFIG_PACKAGE_libnss is not set
# CONFIG_PACKAGE_libopenssl is not set
CONFIG_PACKAGE_libopenssl=y

#
# Build Options
#
# CONFIG_OPENSSL_OPTIMIZE_SPEED is not set
CONFIG_OPENSSL_WITH_ASM=y
CONFIG_OPENSSL_WITH_DEPRECATED=y
# CONFIG_OPENSSL_NO_DEPRECATED is not set
CONFIG_OPENSSL_WITH_ERROR_MESSAGES=y

#
# Protocol Support
#
CONFIG_OPENSSL_WITH_TLS13=y
# CONFIG_OPENSSL_WITH_DTLS is not set
# CONFIG_OPENSSL_WITH_NPN is not set
CONFIG_OPENSSL_WITH_SRP=y
CONFIG_OPENSSL_WITH_CMS=y

#
# Algorithm Selection
#
# CONFIG_OPENSSL_WITH_EC2M is not set
CONFIG_OPENSSL_WITH_CHACHA_POLY1305=y
CONFIG_OPENSSL_PREFER_CHACHA_OVER_GCM=y
CONFIG_OPENSSL_WITH_PSK=y

#
# Less commonly used build options
#
# CONFIG_OPENSSL_WITH_ARIA is not set
# CONFIG_OPENSSL_WITH_CAMELLIA is not set
# CONFIG_OPENSSL_WITH_IDEA is not set
# CONFIG_OPENSSL_WITH_SEED is not set
# CONFIG_OPENSSL_WITH_SM234 is not set
# CONFIG_OPENSSL_WITH_BLAKE2 is not set
# CONFIG_OPENSSL_WITH_MDC2 is not set
# CONFIG_OPENSSL_WITH_WHIRLPOOL is not set
# CONFIG_OPENSSL_WITH_COMPRESSION is not set
# CONFIG_OPENSSL_WITH_RFC3779 is not set

#
# Engine/Hardware Support
#
CONFIG_OPENSSL_ENGINE=y
# CONFIG_OPENSSL_ENGINE_BUILTIN is not set
# CONFIG_OPENSSL_WITH_GOST is not set
# CONFIG_PACKAGE_libopenssl-afalg_sync is not set
# CONFIG_PACKAGE_libopenssl-conf is not set
# CONFIG_PACKAGE_libopenssl-devcrypto is not set
# CONFIG_PACKAGE_libwolfssl is not set

#
@@ -4161,7 +4082,8 @@ CONFIG_PACKAGE_libmbedtls=y
CONFIG_PACKAGE_libblobmsg-json=y
# CONFIG_PACKAGE_libbsd is not set
# CONFIG_PACKAGE_libcanfestival is not set
# CONFIG_PACKAGE_libcap is not set
CONFIG_PACKAGE_libcap=y
# CONFIG_PACKAGE_libcap-bin is not set
# CONFIG_PACKAGE_libcares is not set
# CONFIG_PACKAGE_libcgroup is not set
# CONFIG_PACKAGE_libcharset is not set
@@ -4232,10 +4154,10 @@ CONFIG_LIBCURL_PROXY=y
# CONFIG_PACKAGE_libev is not set
# CONFIG_PACKAGE_libevdev is not set
CONFIG_PACKAGE_libevent2=y
# CONFIG_PACKAGE_libevent2-core is not set
CONFIG_PACKAGE_libevent2-core=y
# CONFIG_PACKAGE_libevent2-extra is not set
# CONFIG_PACKAGE_libevent2-openssl is not set
# CONFIG_PACKAGE_libevent2-pthreads is not set
CONFIG_PACKAGE_libevent2-pthreads=y
# CONFIG_PACKAGE_libevhtp is not set
# CONFIG_PACKAGE_libexif is not set
# CONFIG_PACKAGE_libexpat is not set
@@ -5294,9 +5216,9 @@ CONFIG_LLDPD_WITH_CUSTOM=y
# CONFIG_PACKAGE_htpdate is not set
# CONFIG_PACKAGE_linuxptp is not set
# CONFIG_PACKAGE_ntp-keygen is not set
# CONFIG_PACKAGE_ntp-utils is not set
CONFIG_PACKAGE_ntp-utils=y
# CONFIG_PACKAGE_ntpclient is not set
# CONFIG_PACKAGE_ntpd is not set
CONFIG_PACKAGE_ntpd=y
# CONFIG_PACKAGE_ntpdate is not set


10.02.20213616Base systemBug ReportVery LowHighLAN peers unreachable after a few hoursTrunkUnconfirmed Task Description

Device: D-Link DIR-882 A1
Version: OpenWrt SNAPSHOT r15710-f5f01bcacd / LuCI Master git-21.029.67968-af1f961

After the router has been booted up for about a day, all LAN peers will become unreachable, but WAN works fine, resulting all LAN applications fail.

I ran a few tests. The Router was 192.168.1.1, a computer assigned 192.168.1.233 and another device 192.168.1.169.

Connection to the router was fine:

> tracert 192.168.1.1
Tracing route to OPENWRT.lan [192.168.1.1]
over a maximum of 30 hops:
  1     2 ms     2 ms     2 ms  OPENWRT.lan [192.168.1.1]
Trace complete.

Connection to itself was fine:

> tracert 192.168.1.233
Tracing route to WINDOWS.lan [192.168.1.233]
over a maximum of 30 hops:
  1    <1 ms    <1 ms    <1 ms  WINDOWS.lan [192.168.1.233]
Trace complete.

Connection to peer failed. It returned the address of itself:

> tracert 192.168.1.169
Tracing route to ANDROID.lan [192.168.1.169]
over a maximum of 30 hops:
  1  WINDOWS.lan [192.168.1.233]  reports: Destination host unreachable.
Trace complete.
> ping 192.168.1.169
Pinging 192.168.1.169 with 32 bytes of data:
Reply from 192.168.1.233: Destination host unreachable.
Reply from 192.168.1.233: Destination host unreachable.
Reply from 192.168.1.233: Destination host unreachable.
Reply from 192.168.1.233: Destination host unreachable.
Ping statistics for 192.168.1.169:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

System reboot can solve the problem temporarily. All LAN applications back online:

> ping 192.168.1.169
Pinging 192.168.1.169 with 32 bytes of data:
Reply from 192.168.1.169: bytes=32 time=4ms TTL=64
Reply from 192.168.1.169: bytes=32 time=5ms TTL=64
Reply from 192.168.1.169: bytes=32 time=4ms TTL=64
Reply from 192.168.1.169: bytes=32 time=4ms TTL=64
Ping statistics for 192.168.1.169:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 4ms, Maximum = 5ms, Average = 4ms
09.02.20213613PackagesBug ReportVery LowHighOverestimated entropy in urgndopenwrt-19.07Unconfirmed Task Description

I was looking at the entropy collected by the jitterentropy library that urngd is using. I’ve filed a bug against the library at https://github.com/smuellerDD/jitterentropy-library/issues/21

What I’m seeing it that is overestimates the amount of entropy collected. On my desktop machine this is at least a factor of 100. I’ve not looked at any of my devices using OpenWRT yet, but I expect it to be worse there.

Urngd has an oversampling factor, which is currently set to 2, meaning the factor is 2 time smaller. The oversampling in urngd currently collects twice as many bytes (64), and then tells the kernel that it contains 32 byte / 256 bit of entropy. The library also supports oversampling itself, it’s a parameter to the jent_entropy_collector_alloc function.

I suggest that you set the oversampling factor to at least 1000.

08.02.20213610PackagesBug ReportVery LowHighqos-scripts: default classifications overrides previous...openwrt-19.07Unconfirmed Task Description

My understanding is, that the default classification is intended to classifiy not yet classified packets. But default classification ignores/overrides all previous classifications set by the CONNMARK restore.

Refering the attached screenshot, the CONNMARK restore with mask 0xf. Later on the default classification masks against 0xf0. That leads to a missmatch between the CONNTRACK restore and the default classification. So all CONNTRACK marked packets will be overriden by the default rules.
Actually that means that the default classification can not be used.


01.02.20213604Base systemBug ReportVery LowHighath9k firmware is 0 bytes on Fritzbox 7430TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on Fritz!box 7430
- Software versions of OpenWrt/LEDE snapshot r15642+2-eb11cd9ea3
- Steps to reproduce

Firmware for wifi ath9k in the directory /lib/firmware/ is 0 bytes.

Changing the parameter -s 0x1e000 to -s 0x1e800 results in the firmware
being created with 4096 bytes.

The ssid is now displayed, but wifi is very unstable and the connection
is quickly lost.

Here, too, the parameter -l 4096 was changed to -l 5120, which means
that the connection remains stable.

The file /etc/hotplug.d/firmware/12-ath9k-eeprom was locally changed to:

/usr/bin/fritz_cal_extract -i 1 -s 0x1e800 -e 0x207 -l 5120 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader")

Attached the completely changed file 12-ath9k-eeprom.

20.01.20213582Base systemBug ReportVery LowHighbad eraseblock causes unreadable factory partition on N...TrunkUnconfirmed Task Description

- Device problem occurs on

Netgear R6800

- Software version of OpenWrt

current snapshot

dmesg of the affected device:

[    0.000000] Linux version 5.4.89 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r15541-e87c0d934c)) #0 SMP Tue Jan 19 12:01:03 2021
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Netgear R6800
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] On node 0 totalpages: 65536
[    0.000000]   Normal zone: 576 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000] percpu: Embedded 14 pages/cpu s26768 r8192 d22384 u57344
[    0.000000] pcpu-alloc: s26768 r8192 d22384 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00011190
[    0.000000] Readback ErrCtl register=00011190
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 250272K/262144K available (6060K kernel code, 204K rwdata, 1288K rodata, 1268K init, 238K bss, 11872K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 256
[    0.000000] random: get_random_bytes called from start_kernel+0x340/0x558 with crng_init=0
[    0.000000] CPU Clock: 880MHz
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000008] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.015488] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
[    0.055815] pid_max: default: 32768 minimum: 301
[    0.065164] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.079568] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.097530] rcu: Hierarchical SRCU implementation.
[    0.107607] smp: Bringing up secondary CPUs ...
[    0.133505] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.133516] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.133528] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.133626] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.144747] Synchronize counters for CPU 1: done.
[    0.224318] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.224327] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.224335] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.224392] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.243222] Synchronize counters for CPU 2: done.
[    0.319738] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.319746] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.319754] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.319814] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.330823] Synchronize counters for CPU 3: done.
[    0.390434] smp: Brought up 1 node, 4 CPUs
[    0.403083] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.422382] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.436204] pinctrl core: initialized pinctrl subsystem
[    0.448120] NET: Registered protocol family 16
[    0.467941] FPU Affinity set after 4688 emulations
[    0.484349] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    0.505771] clocksource: Switched to clocksource GIC
[    0.517235] random: fast init done
[    0.519932] NET: Registered protocol family 2
[    0.533512] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.550071] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.565232] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.579410] TCP: Hash tables configured (established 2048 bind 2048)
[    0.592145] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.605030] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.619125] NET: Registered protocol family 1
[    0.627683] PCI: CLS 0 bytes, default 32
[    0.725705] 4 CPUs re-calibrate udelay(lpj = 1163264)
[    0.737308] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    0.762216] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.773732] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.794941] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.811403] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.822747] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.834003] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.845943] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.862253] printk: console [ttyS0] disabled
[    0.870712] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[    0.888650] printk: console [ttyS0] enabled
[    0.905190] printk: bootconsole [early0] disabled
[    0.926457] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388
[    0.941280] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[    0.953951] nand: Macronix MX30LF1G18AC
[    0.961590] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.976676] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
[    0.989741] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[    1.004308] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[    1.018871] Scanning device for bad blocks
[    1.354795] Bad eraseblock 258 at 0x000002040000
[    2.333921] 7 fixed-partitions partitions found on MTD device mt7621-nand
[    2.347453] Creating 7 MTD partitions on "mt7621-nand":
[    2.357876] 0x000000000000-0x000000100000 : "u-boot"
[    2.369215] 0x000000100000-0x000000200000 : "SC PART_MAP"
[    2.381223] 0x000000200000-0x000000600000 : "kernel"
[    2.392538] 0x000000600000-0x000002e00000 : "ubi"
[    2.403387] 0x000002e00000-0x000004600000 : "reserved0"
[    2.415314] 0x000004600000-0x000004800000 : "factory"
[    2.426712] 0x000004800000-0x000008000000 : "reserved1"
[    2.440236] libphy: Fixed MDIO Bus: probed
[    2.476139] libphy: mdio: probed
[    2.482841] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.498374] mtk_soc_eth 1e100000.ethernet: generated random MAC address fa:25:cd:89:6b:20
[    2.515564] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[    2.533374] i2c-mt7621 1e000900.i2c: clock 100 kHz
[    2.544345] mt7621-pci 1e140000.pcie: Parsing DT failed
[    2.557366] NET: Registered protocol family 10
[    2.567638] Segment Routing with IPv6
[    2.575077] NET: Registered protocol family 17
[    2.584024] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.610098] 8021q: 802.1Q VLAN Support v1.8
[    2.620267] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.645577] libphy: dsa slave smi: probed
[    2.654066] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
[    2.671990] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
[    2.690018] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
[    2.707897] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
[    2.725954] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
[    2.743767] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
[    2.761395] DSA: tree 0 setup
[    2.767651] rt2880-pinmux pinctrl: pcie is already enabled
[    2.778618] mt7621-pci 1e140000.pcie: Error applying setting, reverse things back
[    2.793671] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
[    2.808637] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
[    2.923192] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
[    2.934315] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
[    3.045148] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
[    3.059026] mt7621-pci 1e140000.pcie: PCIE0 enabled
[    3.068744] mt7621-pci 1e140000.pcie: PCIE1 enabled
[    3.078473] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    3.097178] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[    3.109861] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
[    3.123561] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    3.137262] pci_bus 0000:00: root bus resource [bus 00-ff]
[    3.148239] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    3.160249] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    3.172743] pci 0000:00:00.0: reg 0x14: [mem 0x60400000-0x6040ffff]
[    3.185301] pci 0000:00:00.0: supports D1
[    3.193293] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    3.205112] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    3.217129] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    3.229624] pci 0000:00:01.0: reg 0x14: [mem 0x60410000-0x6041ffff]
[    3.242183] pci 0000:00:01.0: supports D1
[    3.250175] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    3.263178] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
[    3.275220] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    3.288923] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[    3.317844] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    3.328268] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    3.340414] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    3.353947] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    3.368342] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    3.381778] pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
[    3.393804] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    3.407503] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[    3.436377] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[    3.446812] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
[    3.458957] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    3.472485] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[    3.486883] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    3.500109] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    3.513290] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    3.527169] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    3.540349] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    3.554228] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    3.567766] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[    3.582164] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[    3.595696] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[    3.610094] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
[    3.623628] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
[    3.637159] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
[    3.650693] pci 0000:00:01.0: BAR 7: assigned [io  0x1e161000-0x1e161fff]
[    3.664233] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[    3.678813] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.688707] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
[    3.702245] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    3.715774] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    3.730177] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit]
[    3.744750] pci 0000:00:01.0: PCI bridge to [bus 02]
[    3.754648] pci 0000:00:01.0:   bridge window [io  0x1e161000-0x1e161fff]
[    3.768175] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    3.781719] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[    3.796709] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
[    3.797818] UBI: auto-attach mtd3
[    3.817037] ubi0: attaching mtd3
[    4.228815] ubi0: scanning is finished
[    4.252554] ubi0: attached mtd3 (name "ubi", size 40 MiB)
[    4.263330] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.277018] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.290537] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.304401] ubi0: good PEBs: 319, bad PEBs: 1, corrupted PEBs: 0
[    4.316361] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    4.330744] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1610490449
[    4.348928] ubi0: available PEBs: 0, total reserved PEBs: 319, PEBs reserved for bad PEB handling: 19
[    4.367314] ubi0: background thread "ubi_bgt0d" started, PID 486
[    4.369678] block ubiblock0_0: created from ubi0:0(rootfs)
[    4.390224] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    4.404092] hctosys: unable to open rtc device (rtc0)
[    4.420757] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    4.439415] Freeing unused kernel memory: 1268K
[    4.448460] This architecture does not have kernel memory protection.
[    4.461282] Run /sbin/init as init process
[    5.015980] init: Console is alive
[    5.023014] init: - watchdog -
[    5.788477] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.889330] usbcore: registered new interface driver usbfs
[    5.900381] usbcore: registered new interface driver hub
[    5.911069] usbcore: registered new device driver usb
[    5.930998] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
[    5.948312] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
[    5.966019] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    5.976632] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[    5.997854] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
[    6.016150] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[    6.028879] hub 1-0:1.0: USB hub found
[    6.036452] hub 1-0:1.0: 2 ports detected
[    6.045096] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    6.055717] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[    6.070642] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[    6.083508] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.100520] hub 2-0:1.0: USB hub found
[    6.108083] hub 2-0:1.0: 1 port detected
[    6.120758] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.146084] init: - preinit -
[    6.801631] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[    6.817788] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    6.834653] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.012235] random: jshn: uninitialized urandom read (4 bytes read)
[    7.081996] random: jshn: uninitialized urandom read (4 bytes read)
[    7.148308] random: jshn: uninitialized urandom read (4 bytes read)
[    7.459020] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[    7.472618] 8021q: adding VLAN 0 to HW filter on device lan1
[   10.538231] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[   10.553186] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
[   11.662660] UBIFS (ubi0:1): Mounting in unauthenticated mode
[   11.674294] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 616
[   11.716258] urandom_read: 6 callbacks suppressed
[   11.716270] random: procd: uninitialized urandom read (4 bytes read)
[   11.757609] UBIFS (ubi0:1): recovery needed
[   11.949230] UBIFS (ubi0:1): recovery completed
[   11.958261] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   11.973860] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   11.993611] UBIFS (ubi0:1): FS size: 32759808 bytes (31 MiB, 258 LEBs), journal size 1650688 bytes (1 MiB, 13 LEBs)
[   12.014396] UBIFS (ubi0:1): reserved for root: 1547326 bytes (1511 KiB)
[   12.027574] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 354D5F9F-B560-4EBC-B79F-1976C57BD526, small LPT model
[   12.065167] mount_root: switching to ubifs overlay
[   12.093230] urandom-seed: Seeding with /etc/urandom.seed
[   12.203684] mt7530 mdio-bus:1f lan1: Link is Down
[   12.231835] procd: - early -
[   12.237737] procd: - watchdog -
[   12.845910] procd: - watchdog -
[   12.856805] procd: - ubus -
[   12.922792] procd: - init -
[   13.697474] urngd: v1.0.2 started.
[   13.746355] kmodloader: loading kernel modules from /etc/modules.d/*
[   13.843832] random: crng init done
[   14.012758] Key type cifs.idmap registered
[   14.180204] Loading modules backported from Linux version v5.8.18-0-gab435ce49bd1
[   14.195181] Backport generated by backports.git v5.8.18-1-0-ga630fd46
[   14.254645] xt_time: kernel timezone is -0000
[   14.320718] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=23
[   14.331525] pci 0000:00:00.0: enabling device (0006 -> 0007)
[   14.342810] mt7615e 0000:01:00.0: enabling device (0000 -> 0002)
[   14.362949] mt7615e 0000:01:00.0: Invalid MAC address, using random address 02:0f:65:aa:94:7b
[   14.385122] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.389324] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=24
[   14.400208] pci 0000:00:01.0: enabling device (0006 -> 0007)
[   14.411687] mt7615e 0000:02:00.0: enabling device (0000 -> 0002)
[   14.438077] mt7615e 0000:02:00.0: Invalid MAC address, using random address 22:3b:71:93:43:43
[   14.470145] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   14.507102] PPP generic driver version 2.4.2
[   14.517369] NET: Registered protocol family 24
[   14.527918] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
[   14.527918] 
[   14.539280] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
[   14.539280] 
[   14.606704] kmodloader: done loading kernel modules from /etc/modules.d/*
[   14.852492] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649
[   14.869935] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649
[   14.935755] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307
[   14.936807] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307
[   21.063778] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[   21.076662] mtk_soc_eth 1e100000.ethernet: PPE table busy
[   21.100322] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[   21.116356] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   21.124458] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[   21.147789] 8021q: adding VLAN 0 to HW filter on device lan1
[   21.163286] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   21.177053] br-lan: port 1(lan1) entered blocking state
[   21.187810] br-lan: port 1(lan1) entered disabled state
[   21.200543] device lan1 entered promiscuous mode
[   21.209932] device eth0 entered promiscuous mode
[   21.254001] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[   21.268901] 8021q: adding VLAN 0 to HW filter on device lan2
[   21.286171] br-lan: port 2(lan2) entered blocking state
[   21.296704] br-lan: port 2(lan2) entered disabled state
[   21.308856] device lan2 entered promiscuous mode
[   21.327955] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[   21.345826] 8021q: adding VLAN 0 to HW filter on device lan3
[   21.362764] br-lan: port 3(lan3) entered blocking state
[   21.373269] br-lan: port 3(lan3) entered disabled state
[   21.385022] device lan3 entered promiscuous mode
[   21.405777] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[   21.420558] 8021q: adding VLAN 0 to HW filter on device lan4
[   21.435572] br-lan: port 4(lan4) entered blocking state
[   21.446096] br-lan: port 4(lan4) entered disabled state
[   21.459275] device lan4 entered promiscuous mode
[   21.488788] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode
[   21.502867] 8021q: adding VLAN 0 to HW filter on device wan
[   24.234221] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[   24.249195] br-lan: port 1(lan1) entered blocking state
[   24.259657] br-lan: port 1(lan1) entered listening state
[   26.313720] br-lan: port 1(lan1) entered learning state
[   28.329713] br-lan: port 1(lan1) entered forwarding state
[   28.341012] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

The dmesg shows a bad eraseblock 258 at 0×000002040000, this results in an unreadably factory partition. Symptoms: unreadable MAC addresses (as shown in the dmesg) and TX power on the radios limited to 6dBm, probably because of unreadable calibration data.

A hexdump of the factory partition shows correct contents, but shifted by 0×20000 bytes.

12.01.20213572Base systemBug ReportVery LowHighath79: ar934x internal switch port 5 missingAllUnconfirmed Task Description

Applies to all versions including master branch,
but only in ath79 target
old ar71xx target does not have the problem

for the internal built-in switch for ar934x series
port 5 of the switch is missing, and therefore physical ports
that are connected to port 5 of the internal switch instead of GMAC0
cannot be used.

Attempting to set a VLAN that includes port 5 never takes effect.

This issue is not noticed for many other ar934x boards with 5 physical ports
because routers with 4 LAN and 1 WAN port use GMAC0 for the WAN port
instead of port 5 of the internal switch.

in ar71xx the driver is
target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c

in ath79 the new driver is
target/linux/generic/files/drivers/net/phy/ar8216.c

for 2 of my AR9341 boards
EAP300 v2 and ENS202EXT
port 5 is missing from swconfig output

ath79 output:

root@OpenWrt:~# swconfig dev switch0 show
Global attributes:
        enable_vlan: 1
        ar8xxx_mib_poll_interval: 500
        ar8xxx_mib_type: 0
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        mirror_monitor_port: 0
        mirror_source_port: 0
        arl_table: address resolution table
Port 0: MAC 88:dc:96:34:64:d4
Port 1: MAC 00:e1:18:b0:01:1f

Port 0:
        mib: MIB counters
RxGoodByte  : 810502 (791.5 KiB)
TxByte      : 505477 (493.6 KiB)

        pvid: 0
        link: port:0 link:up speed:1000baseT full-duplex txflow rxflow
Port 1:
        mib: MIB counters
RxGoodByte  : 493285 (481.7 KiB)
TxByte      : 802608 (783.7 KiB)

        pvid: 1
        link: port:1 link:up speed:100baseT full-duplex auto
Port 2:
        mib: No MIB data
        pvid: 0
        link: port:2 link:down
Port 3:
        mib: No MIB data
        pvid: 0
        link: port:3 link:down
Port 4:
        mib: No MIB data
        pvid: 0
        link: port:4 link:down
VLAN 1:
        vid: 1
        ports: 0t 1

ar71xx output:

root@OpenWrt:/# swconfig dev switch0 show
Global attributes:
        enable_vlan: 1
        mirror_monitor_port: 15
Port 0:
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        pvid: 0
        link: port:0 link:up speed:1000baseT full-duplex txflow rxflow
Port 1:
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        pvid: 2
        link: port:1 link:down
Port 2:
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        pvid: 1
        link: port:2 link:down
Port 3:
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        pvid: 1
        link: port:3 link:down
Port 4:
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        pvid: 1
        link: port:4 link:down
Port 5:
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        pvid: 1
        link: port:5 link:down
VLAN 0:
        vid: 0
        ports: 0t
VLAN 1:
        vid: 1
        ports: 0t 2 3 4 5
VLAN 2:
        vid: 2
        ports: 0t 1

asking for port 5 specifically returns ???

root@OpenWrt:/# swconfig dev switch0 port 5 show
Port 5:
        mib: ???
        pvid: ???
        link: ???
30.12.20203545Base systemBug ReportVery LowHighunusable channels 13, 12 & auto on raspberry pi 3b & ze...openwrt-19.07Unconfirmed Task Description

Channels 13, 12 and auto are unusuable despite a valid CRDA selection (PL).

Lack of functional support for channels 13 & 12 where those are legally available renders OpenWrt unusable as AP/client on raspberry pi 3 & zero w. Both share the same BRCM 43430 driver.

Auto selection is also crippled:
Wed Dec 30 04:16:49 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Configured channel (0) not found from the channel list of current mode (1) IEEE 802.11g
Wed Dec 30 04:16:49 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Hardware does not support configured channel

Both would be a showstopper. OpenWrt on such platforms is often picked for its AP capabilities.

+ iw reg get
global
country PL: DFS-ETSI
        (2400 - 2483 @ 40), (N/A, 20), (N/A)
        (5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
        (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
        (5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
        (5725 - 5875 @ 80), (N/A, 13), (N/A)
        (57000 - 66000 @ 2160), (N/A, 40), (N/A)

+ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='PL'
wireless.radio0.htmode='HT20'
wireless.radio0.channel='11'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='my_ssid'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.key='my_key'
wireless.default_radio0.hidden='1'
wireless.default_radio0.encryption='psk2'
+ uci set 'wireless.radio0.channel=13'
+ uci commit wireless
+ sleep 1
+ logread -f
+ logger start testing channel 13
+ wifi
Wed Dec 30 04:16:41 2020 user.notice root: start testing channel 13
+ sleep 3
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED MAC_ADDRESS_WAS_HERE
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED MAC_ADDRESS_WAS_HERE
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED MAC_ADDRESS_WAS_HERE
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Dec 30 04:16:41 2020 daemon.notice netifd: Network device 'wlan0' link is down
Wed Dec 30 04:16:41 2020 daemon.notice netifd: Interface 'lan' has link connectivity loss
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8589): command failed: No error information (-524)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:42 2020 daemon.notice netifd: Interface 'lan' is now down
Wed Dec 30 04:16:42 2020 daemon.notice netifd: Interface 'lan' is disabled
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8612): command failed: No error information (-524)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8612): command failed: Not supported (-95)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8612): command failed: I/O error (-5)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8612): command failed: Too many open files in system (-23)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Wed Dec 30 04:16:42 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Dec 30 04:16:42 2020 kern.info kernel: [ 8810.101885] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Dec 30 04:16:42 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:42 2020 daemon.err hostapd: Using interface wlan0 with hwaddr MAC_ADDRESS_WAS_HERE and ssid "my_ssid"
Wed Dec 30 04:16:42 2020 daemon.err hostapd: Failed to set beacon parameters
Wed Dec 30 04:16:42 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:42 2020 daemon.err hostapd: Interface initialization failed
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:42 2020 daemon.err hostapd: wlan0: Unable to setup interface.
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Dec 30 04:16:42 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Dec 30 04:16:42 2020 kern.err kernel: [ 8810.195905] ieee80211 phy0: brcmf_cfg80211_start_ap: Set Channel failed: chspec=4109, -52
Wed Dec 30 04:16:43 2020 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x7fb0bb4e60 user_data=0 handler=0x41d078
Wed Dec 30 04:16:43 2020 daemon.notice netifd: radio0 (8612): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 8118 path ()
Wed Dec 30 04:16:43 2020 daemon.notice netifd: radio0 (8612): Device setup failed: HOSTAPD_START_FAILED
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8225]: exiting on receipt of SIGTERM
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: started, version 2.80 cachesize 150
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: DNS service limited to local subnets
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain test
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain onion
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain localhost
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain local
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain invalid
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain bind
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain lan
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: reading /tmp/resolv.conf.auto
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain test
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain onion
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain localhost
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain local
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain invalid
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain bind
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain lan
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using nameserver IP_ADDRESS_WAS_HERE#53
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using nameserver IP_ADDRESS_WAS_HERE#53
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: read /etc/hosts - 4 addresses
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
+ logger end testing channel 13
Wed Dec 30 04:16:44 2020 user.notice root: end testing channel 13
+ kill '%1'
+ pkill -9 logread
+ set -x
+ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='PL'
wireless.radio0.htmode='HT20'
wireless.radio0.channel='13'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='my_ssid'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.key='my_key'
wireless.default_radio0.hidden='1'
wireless.default_radio0.encryption='psk2'
+ uci set 'wireless.radio0.channel=12'
+ uci commit wireless
+ sleep 1
+ logread -f
+ logger start testing channel 12
Wed Dec 30 04:16:45 2020 user.notice root: start testing channel 12
+ wifi
+ sleep 3
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8783): command failed: No error information (-524)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8803): command failed: No error information (-524)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8803): command failed: Not supported (-95)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8803): command failed: I/O error (-5)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8803): command failed: Too many open files in system (-23)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Wed Dec 30 04:16:45 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Dec 30 04:16:45 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:45 2020 daemon.err hostapd: Using interface wlan0 with hwaddr MAC_ADDRESS_WAS_HERE and ssid "my_ssid"
Wed Dec 30 04:16:45 2020 kern.info kernel: [ 8813.087454] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Dec 30 04:16:45 2020 daemon.err hostapd: Failed to set beacon parameters
Wed Dec 30 04:16:45 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:45 2020 daemon.err hostapd: Interface initialization failed
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:45 2020 daemon.err hostapd: wlan0: Unable to setup interface.
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Wed Dec 30 04:16:45 2020 kern.err kernel: [ 8813.180327] ieee80211 phy0: brcmf_cfg80211_start_ap: Set Channel failed: chspec=4108, -52
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Dec 30 04:16:45 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Dec 30 04:16:46 2020 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x7fa178be60 user_data=0 handler=0x41d078
Wed Dec 30 04:16:46 2020 daemon.notice netifd: radio0 (8803): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 8118 path ()
Wed Dec 30 04:16:46 2020 daemon.notice netifd: radio0 (8803): Device setup failed: HOSTAPD_START_FAILED
+ logger end testing channel 12
Wed Dec 30 04:16:48 2020 user.notice root: end testing channel 12
+ kill '%1'
+ pkill -9 logread
+ set -x
+ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='PL'
wireless.radio0.htmode='HT20'
wireless.radio0.channel='12'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='my_ssid'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.key='my_key'
wireless.default_radio0.hidden='1'
wireless.default_radio0.encryption='psk2'
+ uci set 'wireless.radio0.channel=auto'
+ uci commit wireless
+ sleep 1
+ logread -f
+ logger start testing channel auto
Wed Dec 30 04:16:49 2020 user.notice root: start testing channel auto
+ wifi
+ sleep 3
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8880): command failed: No error information (-524)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8900): command failed: No error information (-524)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8900): command failed: Not supported (-95)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8900): command failed: I/O error (-5)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8900): command failed: Too many open files in system (-23)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Wed Dec 30 04:16:49 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Wed Dec 30 04:16:49 2020 kern.info kernel: [ 8817.154489] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Dec 30 04:16:49 2020 kern.err kernel: [ 8817.166683] ieee80211 phy0: brcmf_run_escan: error (-52)
Wed Dec 30 04:16:49 2020 kern.err kernel: [ 8817.173057] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52)
Wed Dec 30 04:16:49 2020 kern.err kernel: [ 8817.184908] ieee80211 phy0: brcmf_run_escan: error (-52)
Wed Dec 30 04:16:49 2020 kern.err kernel: [ 8817.191232] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52)
Wed Dec 30 04:16:49 2020 daemon.err hostapd: ACS: Failed to request initial scan
Wed Dec 30 04:16:49 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Configured channel (0) not found from the channel list of current mode (1) IEEE 802.11g
Wed Dec 30 04:16:49 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Hardware does not support configured channel
Wed Dec 30 04:16:49 2020 daemon.err hostapd: Could not select hw_mode and channel. (-3)
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:49 2020 daemon.err hostapd: wlan0: Unable to setup interface.
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Dec 30 04:16:49 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Dec 30 04:16:50 2020 daemon.notice netifd: radio0 (8900): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 8118 path ()
Wed Dec 30 04:16:50 2020 daemon.notice netifd: radio0 (8900): Device setup failed: HOSTAPD_START_FAILED
+ logger end testing channel auto
Wed Dec 30 04:16:52 2020 user.notice root: end testing channel auto
+ kill '%1'
+ pkill -9 logread
+ set -x
+ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='PL'
wireless.radio0.htmode='HT20'
wireless.radio0.channel='auto'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='my_ssid'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.key='my_key'
wireless.default_radio0.hidden='1'
wireless.default_radio0.encryption='psk2'
+ uci set 'wireless.radio0.channel=11'
+ uci commit wireless
+ sleep 1
+ logread -f
+ logger start testing channel 11
Wed Dec 30 04:16:53 2020 user.notice root: start testing channel 11
+ wifi
+ sleep 3
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8970): command failed: No error information (-524)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8990): command failed: No error information (-524)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8990): command failed: Not supported (-95)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8990): command failed: I/O error (-5)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8990): command failed: Too many open files in system (-23)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Wed Dec 30 04:16:53 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Dec 30 04:16:53 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Dec 30 04:16:53 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:53 2020 daemon.err hostapd: Using interface wlan0 with hwaddr MAC_ADDRESS_WAS_HERE and ssid "my_ssid"
Wed Dec 30 04:16:53 2020 kern.info kernel: [ 8821.268054] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Dec 30 04:16:53 2020 kern.info kernel: [ 8821.429792] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Wed Dec 30 04:16:53 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED
Wed Dec 30 04:16:53 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Network device 'wlan0' link is up
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Interface 'lan' is enabled
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Interface 'lan' is setting up now
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Interface 'lan' is now up
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Dec 30 04:16:54 2020 user.notice firewall: Reloading firewall due to ifup of lan (wlan0)
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[8765]: exiting on receipt of SIGTERM
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: started, version 2.80 cachesize 150
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: DNS service limited to local subnets
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq-dhcp[9156]: DHCP, IP range IP_ADDRESS_WAS_HERE -- IP_ADDRESS_WAS_HERE, lease time 12h
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain test
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain onion
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain localhost
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain local
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain invalid
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain bind
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain lan
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: reading /tmp/resolv.conf.auto
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain test
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain onion
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain localhost
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain local
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain invalid
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain bind
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain lan
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using nameserver IP_ADDRESS_WAS_HERE#53
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using nameserver IP_ADDRESS_WAS_HERE#53
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: read /etc/hosts - 4 addresses
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq-dhcp[9156]: read /etc/ethers - 0 addresses
+ logger end testing channel 11
Wed Dec 30 04:16:56 2020 user.notice root: end testing channel 11
+ kill '%1'
+ pkill -9 logread
+ iw list
Wiphy phy0
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 1:
                Capabilities: 0x1020
                        HT20
                        Static SM Power Save
                        RX HT20 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-7
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (20.0 dBm)
                        * 2442 MHz [7] (20.0 dBm)
                        * 2447 MHz [8] (20.0 dBm)
                        * 2452 MHz [9] (20.0 dBm)
                        * 2457 MHz [10] (20.0 dBm)
                        * 2462 MHz [11] (20.0 dBm)
                        * 2467 MHz [12] (20.0 dBm)
                        * 2472 MHz [13] (20.0 dBm)
                        * 2484 MHz [14] (disabled)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 2
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
        Supported extended features:
                * [ 4WAY_HANDSHAKE_STA_PSK ]: 4-way handshake with PSK in station mode
                * [ 4WAY_HANDSHAKE_STA_1X ]: 4-way handshake with 802.1X in station mode
+ iwlist wlan0 channel
wlan0     13 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
26.12.20203536KernelBug ReportVery LowHighRTL8811AU Wi-Fi stick dont workAllUnconfirmed Task Description

After connecting RTL8811AU to USB, it turns out that OpenWRT cannot handle it. Please add the driver to the official images.


25.12.20203533Base systemBug ReportVery LowHighrelayd can't relay packets between lan pc and the openw...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on MediaTek MT7620A ver:2 eco:6
- Software versions

  URL: https://github.com/openwrt/openwrt.git/trunk
  Relative URL: ^/trunk
  Repository Root: https://github.com/openwrt/openwrt.git
  Repository UUID: 48f6a8c1-d3d8-b121-14bd-ce57b7db7bff
  Revision: 92580

- Steps to reproduce

 1. add wifi client
 2. add relay bridge interface between wlan and lan
 3. the wlan interface get ip 192.168.3.136, the pc in lan get ip 192.168.3.128, the ip of root ap was 192.168.3.1
 4. the pc can ping 192.168.3.1 but can not ping 192.168.3.136


23.12.20203530Base systemBug ReportVery LowHighD-Link DIR-645 not maintaining WLAN connectionopenwrt-19.07Unconfirmed Task Description

- Device problem occurs on
D-Link DIR-645 Rev. A1

- Software versions of OpenWrt/LEDE release, packages, etc.
LEDE 19.07.4

- Steps to reproduce
Setup the wireless connection. After some time the WLAN connection stops working. A restart is necessary to regain WLAN.

Topic is discussed in the forums:
https://forum.lede-project.org/t/d-link-dir-645-wifi-interface-not-maintaining-connection/6277

I am able and willing to provide log files. But I am new to the business of debugging itself. Help and guidance welcome!

Reference links:
https://forum.lede-project.org/t/d-link-dir-645-wifi-interface-not-maintaining-connection/6277 https://forum.openwrt.org/t/assistance-needed-debugging-wlan-d-link-dir-645/18664

14.11.20203450KernelBug ReportVery LowHighAC2100 MT7621 eth0 (mtk_soc_eth): transmit queue 0 time...openwrt-19.07Unconfirmed Task Description

Model Xiaomi Mi Router AC2100
Architecture MediaTek MT7621 ver:1 eco:3
Firmware Version OpenWrt 19.07.4 r11208-ce6496d796 / LuCI openwrt-19.07 branch git-20.247.75781-0d0ab01
Kernel Version 4.14.195

Random BUG, no step to reproduce it exactly
Impact : Outage for few seconds, connectivity lost
Full log attached.

Regards

08.11.20203439Base systemBug ReportVery LowHighCan't connect for WPA2-Enterprise from Windows system.openwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

Device problem occurs on

I can’t connect to network wifi (WPA2-Enterprise) from Windows system. I can connect from Linux and IOS systems.
I tested packages: wpad-mesh-openssl, wpad-openssl, wpad-wolfssl and wpad.

Software versions of OpenWrt/LEDE release, packages, etc

cat /etc/openwrt_release
DISTRIB_ID=’OpenWrt’ DISTRIB_RELEASE=’19.07-SNAPSHOT’ DISTRIB_REVISION=’r11201-f5afa593e7’ DISTRIB_TARGET=’ath79/generic’ DISTRIB_ARCH=’mips_24kc’ DISTRIB_DESCRIPTION=’OpenWrt 19.07-SNAPSHOT r11201-f5afa593e7’ DISTRIB_TAINTS=’’

opkg list-installed
adblock - 4.0.6-3
base-files - 204.2-r11201-f5afa593e7
blkid - 2.34-1
block-mount - 2020-05-12-84269037-1
busybox - 1.30.1-6
ca-bundle - 20200601-1
cgi-io - 19
chat - 2.4.7.git-2019-05-25-3
comgt - 0.32-32
comgt-directip - 0.32-32
comgt-ncm - 0.32-32
coreutils - 8.30-2
coreutils-sort - 8.30-2
ddns-scripts - 2.7.8-13
dnsmasq - 2.80-16.1
dropbear - 2019.78-2
e2fsprogs - 1.44.5-2
ekooneplstat - 20150706
etherwake - 1.09-4
firewall - 2019-11-22-8174814a-2
fstools - 2020-05-12-84269037-1
fwtool - 2
getrandom - 2019-06-16-4df34a4d-3
hostapd-common - 2019-08-08-ca8c2bd2-4
ip-tiny - 5.0.0-2.1
ipset - 7.3-1
iptables - 1.8.3-1
iw - 5.0.1-1
iwinfo - 2019-10-16-07315b6f-1
jshn - 2020-05-25-66195aee-1
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 4.14.195-1-38fe082385c94876bc5af35c67d5656a
kmod-ath - 4.14.195+4.19.137-1-2
kmod-ath9k - 4.14.195+4.19.137-1-2
kmod-ath9k-common - 4.14.195+4.19.137-1-2
kmod-cfg80211 - 4.14.195+4.19.137-1-2
kmod-crypto-aead - 4.14.195-1
kmod-crypto-ccm - 4.14.195-1
kmod-crypto-cmac - 4.14.195-1
kmod-crypto-crc32c - 4.14.195-1
kmod-crypto-ctr - 4.14.195-1
kmod-crypto-des - 4.14.195-1
kmod-crypto-ecb - 4.14.195-1
kmod-crypto-gcm - 4.14.195-1
kmod-crypto-gf128 - 4.14.195-1
kmod-crypto-ghash - 4.14.195-1
kmod-crypto-hash - 4.14.195-1
kmod-crypto-hmac - 4.14.195-1
kmod-crypto-iv - 4.14.195-1
kmod-crypto-manager - 4.14.195-1
kmod-crypto-md4 - 4.14.195-1
kmod-crypto-md5 - 4.14.195-1
kmod-crypto-null - 4.14.195-1
kmod-crypto-pcompress - 4.14.195-1
kmod-crypto-rng - 4.14.195-1
kmod-crypto-seqiv - 4.14.195-1
kmod-crypto-sha256 - 4.14.195-1
kmod-crypto-sha512 - 4.14.195-1
kmod-crypto-wq - 4.14.195-1
kmod-fs-ext4 - 4.14.195-1
kmod-fs-ksmbd - 4.14.195+3.1.3-1
kmod-fs-vfat - 4.14.195-1
kmod-fuse - 4.14.195-1
kmod-gpio-button-hotplug - 4.14.195-3
kmod-ipt-conntrack - 4.14.195-1
kmod-ipt-core - 4.14.195-1
kmod-ipt-ipset - 4.14.195-1
kmod-ipt-nat - 4.14.195-1
kmod-ipt-offload - 4.14.195-1
kmod-ipt-raw - 4.14.195-1
kmod-lib-crc-ccitt - 4.14.195-1
kmod-lib-crc16 - 4.14.195-1
kmod-lib-textsearch - 4.14.195-1
kmod-mac80211 - 4.14.195+4.19.137-1-2
kmod-mii - 4.14.195-1
kmod-nf-conntrack - 4.14.195-1
kmod-nf-conntrack6 - 4.14.195-1
kmod-nf-flow - 4.14.195-1
kmod-nf-ipt - 4.14.195-1
kmod-nf-ipt6 - 4.14.195-1
kmod-nf-nat - 4.14.195-1
kmod-nf-nathelper-extra - 4.14.195-1
kmod-nf-reject - 4.14.195-1
kmod-nf-reject6 - 4.14.195-1
kmod-nfnetlink - 4.14.195-1
kmod-nls-base - 4.14.195-1
kmod-nls-cp437 - 4.14.195-1
kmod-nls-iso8859-1 - 4.14.195-1
kmod-nls-utf8 - 4.14.195-1
kmod-phy-ath79-usb - 4.14.195-1
kmod-ppp - 4.14.195-1
kmod-pppoe - 4.14.195-1
kmod-pppox - 4.14.195-1
kmod-scsi-core - 4.14.195-1
kmod-slhc - 4.14.195-1
kmod-tun - 4.14.195-1
kmod-udptunnel4 - 4.14.195-1
kmod-udptunnel6 - 4.14.195-1
kmod-usb-acm - 4.14.195-1
kmod-usb-core - 4.14.195-1
kmod-usb-ehci - 4.14.195-1
kmod-usb-ledtrig-usbport - 4.14.195-1
kmod-usb-net - 4.14.195-1
kmod-usb-net-cdc-ether - 4.14.195-1
kmod-usb-net-cdc-mbim - 4.14.195-1
kmod-usb-net-cdc-ncm - 4.14.195-1
kmod-usb-net-huawei-cdc-ncm - 4.14.195-1
kmod-usb-net-qmi-wwan - 4.14.195-1
kmod-usb-net-rndis - 4.14.195-1
kmod-usb-net-sierrawireless - 4.14.195-1
kmod-usb-serial - 4.14.195-1
kmod-usb-serial-option - 4.14.195-1
kmod-usb-serial-qualcomm - 4.14.195-1
kmod-usb-serial-sierrawireless - 4.14.195-1
kmod-usb-serial-wwan - 4.14.195-1
kmod-usb-storage - 4.14.195-1
kmod-usb-storage-uas - 4.14.195-1
kmod-usb-wdm - 4.14.195-1
kmod-usb2 - 4.14.195-1
kmod-wireguard - 4.14.195+1.0.20200611-1
ksmbd-server - 3.2.1-1
ksmbd-utils - 3.2.1-1
libblkid1 - 2.34-1
libblobmsg-json - 2020-05-25-66195aee-1
libc - 1.1.24-2
libcomerr0 - 1.44.5-2
libext2fs2 - 1.44.5-2
libgcc1 - 7.5.0-2
libip4tc2 - 1.8.3-1
libip6tc2 - 1.8.3-1
libipset13 - 7.3-1
libiwinfo-lua - 2019-10-16-07315b6f-1
libiwinfo20181126 - 2019-10-16-07315b6f-1
libjson-c2 - 0.12.1-3.1
libjson-script - 2020-05-25-66195aee-1
liblua5.1.5 - 5.1.5-3
liblucihttp-lua - 2019-07-05-a34a17d5-1
liblucihttp0 - 2019-07-05-a34a17d5-1
liblzo2 - 2.10-2
libmbedtls12 - 2.16.8-1
libmnl0 - 1.0.4-2
libncurses6 - 6.1-5
libnl-core200 - 3.4.0-2
libnl-genl200 - 3.4.0-2
libnl-tiny - 0.1-5
libopenssl-conf - 1.1.1g-1
libopenssl1.1 - 1.1.1g-1
libpcap1 - 1.9.1-2.1
libpcre - 8.43-1
libpthread - 1.1.24-2
librt - 1.1.24-2
libss2 - 1.44.5-2
libubox20191228 - 2020-05-25-66195aee-1
libubus-lua - 2019-12-27-041c9d1c-1
libubus20191227 - 2019-12-27-041c9d1c-1
libuci20130104 - 2019-09-01-415f9e48-3
libuclient20160123 - 2020-06-17-51e16ebf-1
libusb-1.0-0 - 1.0.22-2
libustream-openssl20150806 - 2020-03-13-40b563b1-1
libuuid1 - 2.34-1
libwolfssl24 - 4.5.0-stable-1
libxtables12 - 1.8.3-1
logd - 2019-06-16-4df34a4d-3
lua - 5.1.5-3
luci - git-20.247.75781-0d0ab01-1
luci-app-adblock - git-20.247.75781-0d0ab01-1
luci-app-commands - git-20.247.75781-0d0ab01-1
luci-app-ddns - 2.4.9-7
luci-app-ekooneplstat - 20190629
luci-app-firewall - git-20.247.75781-0d0ab01-1
luci-app-ksmbd - git-20.247.75781-0d0ab01-1
luci-app-openvpn - git-20.247.75781-0d0ab01-1
luci-app-opkg - git-20.247.75781-0d0ab01-1
luci-app-p910nd - git-20.247.75781-0d0ab01-1
luci-app-vpnbypass - git-20.247.75781-0d0ab01-19
luci-app-wifischedule - git-20.247.75781-0d0ab01-1
luci-app-wireguard - git-20.247.75781-0d0ab01-1
luci-app-wol - git-20.247.75781-0d0ab01-1
luci-base - git-20.247.75781-0d0ab01-1
luci-compat - git-20.247.75781-0d0ab01-1
luci-i18n-adblock-en - git-20.247.75781-0d0ab01-1
luci-i18n-adblock-pl - git-20.247.75781-0d0ab01-1
luci-i18n-base-en - git-20.247.75781-0d0ab01-1
luci-i18n-base-pl - git-20.247.75781-0d0ab01-1
luci-i18n-commands-en - git-20.247.75781-0d0ab01-1
luci-i18n-commands-pl - git-20.247.75781-0d0ab01-1
luci-i18n-ddns-en - 2.4.9-7
luci-i18n-ddns-pl - 2.4.9-7
luci-i18n-firewall-en - git-20.247.75781-0d0ab01-1
luci-i18n-firewall-pl - git-20.247.75781-0d0ab01-1
luci-i18n-ksmbd-en - git-20.247.75781-0d0ab01-1
luci-i18n-ksmbd-pl - git-20.247.75781-0d0ab01-1
luci-i18n-openvpn-en - git-20.247.75781-0d0ab01-1
luci-i18n-openvpn-pl - git-20.247.75781-0d0ab01-1
luci-i18n-opkg-en - git-20.247.75781-0d0ab01-1
luci-i18n-opkg-pl - git-20.247.75781-0d0ab01-1
luci-i18n-p910nd-en - git-20.247.75781-0d0ab01-1
luci-i18n-p910nd-pl - git-20.247.75781-0d0ab01-1
luci-i18n-vpnbypass-en - git-20.247.75781-0d0ab01-19
luci-i18n-vpnbypass-pl - git-20.247.75781-0d0ab01-19
luci-i18n-wifischedule-en - git-20.247.75781-0d0ab01-1
luci-i18n-wifischedule-pl - git-20.247.75781-0d0ab01-1
luci-i18n-wireguard-en - git-20.247.75781-0d0ab01-1
luci-i18n-wireguard-pl - git-20.247.75781-0d0ab01-1
luci-i18n-wol-en - git-20.247.75781-0d0ab01-1
luci-i18n-wol-pl - git-20.247.75781-0d0ab01-1
luci-lib-ip - git-20.247.75781-0d0ab01-1
luci-lib-ipkg - git-20.247.75781-0d0ab01-1
luci-lib-jsonc - git-20.247.75781-0d0ab01-1
luci-lib-nixio - git-20.247.75781-0d0ab01-1
luci-mod-admin-full - git-20.247.75781-0d0ab01-1
luci-mod-network - git-20.247.75781-0d0ab01-1
luci-mod-status - git-20.247.75781-0d0ab01-1
luci-mod-system - git-20.247.75781-0d0ab01-1
luci-proto-3g - git-20.247.75781-0d0ab01-1
luci-proto-ipv6 - git-20.247.75781-0d0ab01-1
luci-proto-ncm - git-20.247.75781-0d0ab01-1
luci-proto-ppp - git-20.247.75781-0d0ab01-1
luci-proto-qmi - git-20.247.75781-0d0ab01-1
luci-proto-relay - git-20.247.75781-0d0ab01-1
luci-proto-wireguard - git-20.247.75781-0d0ab01-1
luci-ssl-openssl - git-20.247.75781-0d0ab01-1
luci-theme-bootstrap - git-20.247.75781-0d0ab01-1
mbedtls-util - 2.16.8-1
mtd - 24
netifd - 2019-08-05-5e02f944-1
ntfs-3g - 2017.3.23-2-fuseint
odhcpd-ipv6only - 2020-05-03-49e4949c-3
openssh-sftp-server - 8.0p1-1
openssl-util - 1.1.1g-1
openvpn-easy-rsa - 3.0.4-1
openvpn-openssl - 2.4.7-2
openwrt-keyring - 2019-07-25-8080ef34-1
opkg - 2020-05-07-f2166a89-1
p910nd - 0.97-8
port-mirroring - 1.4.4-2
ppp - 2.4.7.git-2019-05-25-3
ppp-mod-pppoe - 2.4.7.git-2019-05-25-3
procd - 2020-03-07-09b9bd82-1
relayd - 2020-04-25-f4d759be-1
rpcd - 2020-05-26-67c8a3fd-1
rpcd-mod-file - 2020-05-26-67c8a3fd-1
rpcd-mod-iwinfo - 2020-05-26-67c8a3fd-1
rpcd-mod-luci - 20191114
rpcd-mod-rrdns - 20170710
screen - 4.8.0-1
swconfig - 12
sysinfo - 20200403
terminfo - 6.1-5
uboot-envtools - 2018.03-3
ubox - 2019-06-16-4df34a4d-3
ubus - 2019-12-27-041c9d1c-1
ubusd - 2019-12-27-041c9d1c-1
uci - 2019-09-01-415f9e48-3
uclient-fetch - 2020-06-17-51e16ebf-1
uhttpd - 2020-03-13-975dce23-1
umbim - 2019-03-11-24f9dc71-1
uqmi - 2019-06-27-1965c713-7
urandom-seed - 1.0-1
urngd - 2020-01-21-c7f7b6b6-1
usb-modeswitch - 2017-12-19-f40f84c2-2
usign - 2020-05-23-f1f65026-1
vpnbypass - 1.3.1-7
wget - 1.20.3-4
wifischedule - 1-2
wireguard-tools - 1.0.20191226-1
wireless-regdb - 2019.06.03-1
wpad-mesh-openssl - 2019-08-08-ca8c2bd2-4
wsdd2 - 2020-05-06-671d040c-1
wwan - 2014-07-17-1
xinetd - 2.3.15-5
zlib - 1.2.11-3

cat /etc/config/wireless
config wifi-device ‘radio1’

  option type 'mac80211'
  option channel '36'
  option hwmode '11a'
  option path 'pci0000:00/0000:00:00.0'
  option htmode 'HT20'
  option country 'PL'


config wifi-iface ‘default_radio1’

  option device 'radio1'
  option network 'lan'
  option mode 'ap'
  option auth_server '192.168.1.X'
  option auth_port '1812'
  option auth_secret password
  option ssid 'name'
  option encryption 'wpa2+ccmp'
  option wpa_disable_eapol_key_retries '1'
  option ieee80211w '2'
  option disassoc_low_ack '0'

Steps to reproduce

Always when I tried connect to wireless network from Windows system I can’t connect to network and I saw below logs:

logread | grep wlan1
Sun Nov 8 21:54:54 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.11: authenticated
Sun Nov 8 21:54:54 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.11: associated (aid 2)
Sun Nov 8 21:54:54 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-STARTED MAC ADDRESS
Sun Nov 8 21:54:54 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
Sun Nov 8 21:54:55 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-STARTED MAC ADDRESS
Sun Nov 8 21:54:55 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
Sun Nov 8 21:54:56 2020 daemon.warn hostapd: wlan1: STA MAC ADDRESS IEEE 802.1X: could not extract EAP-Message from RADIUS message
Sun Nov 8 21:54:56 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-FAILURE2 MAC ADDRESS
Sun Nov 8 21:54:56 2020 daemon.warn hostapd: wlan1: STA MAC ADDRESS IEEE 802.1X: authentication failed - EAP type: 0 (unknown)
Sun Nov 8 21:54:56 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.1X: Supplicant used different EAP type: 1 (Identity)
Sun Nov 8 21:55:01 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.11: deauthenticated due to local deauth request
Sun Nov 8 21:55:03 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.11: authenticated
Sun Nov 8 21:55:03 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.11: associated (aid 2)
Sun Nov 8 21:55:03 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-STARTED MAC ADDRESS
Sun Nov 8 21:55:03 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
Sun Nov 8 21:55:03 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-STARTED MAC ADDRESS
Sun Nov 8 21:55:03 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
Sun Nov 8 21:55:04 2020 daemon.warn hostapd: wlan1: STA MAC ADDRESS IEEE 802.1X: could not extract EAP-Message from RADIUS message
Sun Nov 8 21:55:04 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-FAILURE2 MAC ADDRESS
Sun Nov 8 21:55:04 2020 daemon.warn hostapd: wlan1: STA MAC ADDRESS IEEE 802.1X: authentication failed - EAP type: 0 (unknown)
Sun Nov 8 21:55:04 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.1X: Supplicant used different EAP type: 1 (Identity)
Sun Nov 8 21:55:09 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.11: deauthenticated due to local deauth request

This problem occurred after upgrade openwrt system.

02.11.20203427ToolchainBug ReportVery LowHighImageBuilder images break Xiaomi Redmi 2100TrunkUnconfirmed Task Description

Hi,

I’m building image for my Xiaomi Redmi 2100 using the imagebuilder, but when I flash my router it never comes back and the amber LED is on. I’m building my image this way:
make image PROFILE=xiaomi_redmi-router-ac2100 PACKAGES=”luci -luci-proto-ppp wpad-wolfssl iperf3 ethtool mtr iwinfo kmod-tcp-bbr kmod-mtd-rw libustream-wolfssl ca-bundle -ppp -ppp-mod-pppoe -kmod-pppox -kmod-pppoe -kmod-ppp -wpad-basic-wolfssl” I’m using GitHub actions to automate it, you can check the workflow here: https://github.com/amaumene/xiaomi_redmi-router-ac2100_openwrt_mesh/blob/master/.github/workflows/build-openwrt.yml I’ve restored the original firmware and flashed with the latest snapshot from openwrt.org without any issue. The only error that I can see is this “/home/alex/openwrt-imagebuilder-ramips-mt7621.Linux-x86_64/build_dir/target-mipsel_24kc_musl/root-ramips/lib/functions/procd.sh: line 43: /home/alex/openwrt-imagebuilder-ramips-mt7621.Linux-x86_64/build_dir/target-mipsel_24kc_musl/root-ramips/usr/share/libubox/jshn.sh: No such file or directory”

01.11.20203423Base systemBug ReportVery LowHighNo dependencies installed and configuredTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

root@OpenWrt:~# opkg install luci
Installing luci (git-20.304.73778-5a485f8) to root...
Downloading https://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-20.304.73778-5a485f8_all.ipk Configuring luci.
root@OpenWrt:~# opkg list-installed | grep luci
luci - git-20.304.73778-5a485f8

On a fresh install, no dependencies installed and configured, leading to an non functional Luci instance.

On the lastest snapshots, with my Linksys EA7500 V1.

31.10.20203418Base systemBug ReportVery LowHighLatest build for TL-WR1043ND v2 (ath79) does not boot -...TrunkUnconfirmed Task Description

Device: TL-WR1043ND v2
Software versions: Linux version 5.4.72 (risa@gentoo-vb) (gcc version 9.3.0 (OpenWrt GCC 9.3.0 r14820-5cdc65f6d1)) #0 Sat Oct 31 20:27:47 2020

I am building a the latest snapshot into a custom image by using ImageBuilder, the latest build of r14820-5cdc65f6d1 does not boot, because the `/sbin/init` process misses some libraries. Following is the output from serial console during the failed boot:

U-Boot 1.1.4 (Jun 18 2013 - 15:51:52)

ap135 - Scorpion 1.0DRAM:
sri
Scorpion 1.0
ath_ddr_initial_config(178): (16bit) ddr2 init
tap = 0x00000003
Tap (low, high) = (0x0, 0x1e)
Tap values = (0xf, 0xf, 0xf, 0xf)
64 MB
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x17
flash size 8MB, sector count = 128
Flash:  8 MB
Using default environment

*** Warning *** : PCIe WLAN Module not found !!!
*** Warning *** : PCIe WLAN Module not found !!!
In:    serial
Out:   serial
Err:   serial
Net:   ath_gmac_enet_initialize...
athrs_sgmii_res_cal: cal value = 0xe
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
ath_gmac_enet_initialize: reset mask:c02200
Scorpion  ----> S17 PHY *
athrs17_reg_init: complete
: cfg1 0x80000000 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
eth0 up
athrs17_reg_init_wan done
SGMII in forced mode
athr_gmac_sgmii_setup SGMII done
: cfg1 0x800c0000 cfg2 0x7214
eth1: ba:be:fa:ce:08:41
eth1 up
eth0, eth1
Setting 0x18116290 to 0x50a1a14f
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 5.4.72 (risa@gentoo-vb) (gcc version 9.3.0 (OpenWrt GCC 9.3.0 r14820-5cdc65f6d1)) #0 Sat Oct 31 20:27:47 2020
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] MIPS: machine is TP-Link TL-WR1043ND v2
[    0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16240
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 57408K/65536K available (4753K kernel code, 183K rwdata, 1100K rodata, 1188K init, 196K bss, 8128K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] random: get_random_bytes called from start_kernel+0x32c/0x518 with crng_init=0
[    0.000000] CPU clock: 720.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
[    0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
[    0.008304] Calibrating delay loop... 359.42 BogoMIPS (lpj=718848)
[    0.042895] pid_max: default: 32768 minimum: 301
[    0.047939] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.055731] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.068023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.078401] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.085760] pinctrl core: initialized pinctrl subsystem
[    0.092269] NET: Registered protocol family 16
[    0.125112] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    0.138512] clocksource: Switched to clocksource MIPS
[    0.145000] NET: Registered protocol family 2
[    0.150412] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.159383] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.167556] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.175076] TCP: Hash tables configured (established 1024 bind 1024)
[    0.181978] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.188984] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.196689] NET: Registered protocol family 1
[    0.201403] PCI: CLS 0 bytes, default 32
[    0.209179] workingset: timestamp_bits=14 max_order=14 bucket_order=0
[    0.222121] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.228370] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.253702] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[    0.260356] gpio-export gpio-export: 1 gpio(s) exported
[    0.266791] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.274237] printk: console [ttyS0] disabled
[    0.278880] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A
[    0.288078] printk: console [ttyS0] enabled
[    0.288078] printk: console [ttyS0] enabled
[    0.296983] printk: bootconsole [early0] disabled
[    0.296983] printk: bootconsole [early0] disabled
[    0.326653] spi-nor spi0.0: s25fl064k (8192 Kbytes)
[    0.331659] 3 fixed-partitions partitions found on MTD device spi0.0
[    0.338114] Creating 3 MTD partitions on "spi0.0":
[    0.342997] 0x000000000000-0x000000020000 : "u-boot"
[    0.348955] 0x000000020000-0x0000007f0000 : "firmware"
[    0.356886] 2 tplink-fw partitions found on MTD device firmware
[    0.362955] Creating 2 MTD partitions on "firmware":
[    0.368020] 0x000000000000-0x0000001e7881 : "kernel"
[    0.373908] 0x0000001e7884-0x0000007d0000 : "rootfs"
[    0.379757] mtd: device 3 (rootfs) set to be root filesystem
[    0.387289] 1 squashfs-split partitions found on MTD device rootfs
[    0.393628] 0x0000004b0000-0x0000007d0000 : "rootfs_data"
[    0.399977] 0x0000007f0000-0x000000800000 : "art"
[    0.407475] libphy: Fixed MDIO Bus: probed
[    0.744356] libphy: ag71xx_mdio: probed
[    0.751255] switch0: Atheros AR8327 rev. 4 switch registered on mdio.0
[    1.138505] random: fast init done
[    1.335866] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[    1.346964] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[    1.668297] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[    1.678016] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: sgmii
[    1.684519] i2c /dev entries driver
[    1.690083] NET: Registered protocol family 10
[    1.699644] Segment Routing with IPv6
[    1.703525] NET: Registered protocol family 17
[    1.708120] 8021q: 802.1Q VLAN Support v1.8
[    1.718966] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    1.732581] Freeing unused kernel memory: 1188K
[    1.737201] This architecture does not have kernel memory protection.
[    1.743742] Run /sbin/init as init process
Error loading shared library libubox.so: No such file or directory (needed by /sbin/init)
Error loading shared library libubus.so: No such file or directory (needed by /sbin/init)
Error loading shared library libjson-c.so.5: No such file or directory (needed by /sbin/init)
Error loading shared library libblobmsg_json.so: No such file or directory (needed by /sbin/init)
Error loading shared library libjson_script.so: No such file or directory (needed by /sbin/init)
Error relocating[    2.195702] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00
[    2.204495] Rebooting in 1 seconds..


U-Boot 1.1.4 (Jun 18 2013 - 15:51:52)

The libs are built correctly:

risa@gentoo-vb ~/openwrt/openwrt $ ldd staging_dir/host/bin/ucert
        linux-vdso.so.1 (0x00007ffcd6db2000)
        libubox.so => /home/risa/openwrt/openwrt/staging_dir/host/lib/libubox.so (0x00007f914f60e000)
        libblobmsg_json.so => /home/risa/openwrt/openwrt/staging_dir/host/lib/libblobmsg_json.so (0x00007f914f609000)
        libjson-c.so.5 => /home/risa/openwrt/openwrt/staging_dir/host/lib/libjson-c.so.5 (0x00007f914f5f6000)
        libc.so.6 => /lib64/libc.so.6 (0x00007f914f433000)
        /lib64/ld-linux-x86-64.so.2 (0x00007f914f626000)
risa@gentoo-vb ~/openwrt/openwrt $ ls -la /home/risa/openwrt/openwrt/staging_dir/host/lib/libubox.so
-rwxr-xr-x 1 risa risa 417040 Oct 31 23:25 /home/risa/openwrt/openwrt/staging_dir/host/lib/libubox.so
risa@gentoo-vb ~/openwrt/openwrt $ ls -la /home/risa/openwrt/openwrt/staging_dir/host/lib/libblobmsg_json.so
-rwxr-xr-x 1 risa risa 115704 Oct 31 23:25 /home/risa/openwrt/openwrt/staging_dir/host/lib/libblobmsg_json.so
risa@gentoo-vb ~/openwrt/openwrt $ ls -la /home/risa/openwrt/openwrt/staging_dir/host/lib/libjson-c.so.5
lrwxrwxrwx 1 risa risa 18 Oct 31 23:24 /home/risa/openwrt/openwrt/staging_dir/host/lib/libjson-c.so.5 -> libjson-c.so.5.1.0
risa@gentoo-vb ~/openwrt/openwrt $ ls -la ./staging_dir/target-mips_24kc_musl/usr/lib/libubus.so
-rwxr-xr-x 1 risa risa 146900 Oct 31 23:27 ./staging_dir/target-mips_24kc_musl/usr/lib/libubus.so

but for some reason are not present in the final image built from ImageBuilder.

The image built using the same configuration from the older revision (7190fb2da4) has the size:

-rw-r--r--  1 risa risa 6684973 Sep 20 15:46 openwrt-ath79-generic-tplink_tl-wr1043nd-v2-squashfs-sysupgrade.bin

while the new one built now is much smaller. It looks like some parts are not correctly stored in the image:

-rw-r--r--  1 risa risa 4915501 Oct 31 23:46 openwrt-ath79-generic-tplink_tl-wr1043nd-v2-squashfs-sysupgrade.bin


25.10.20203406KernelBug ReportVery LowHighproblems router ip address TrunkUnconfirmed Task Description

Hello all,

For some time I see that a problem persists when you want to change the ip address to access the router, this cannot be done from the luci web interface.
The following errors occurred after I connected to the web interface and I wanted to access 5ghz wifi from the phone it can no longer connect to wifi.

WRT1900ACS V2

BusyBox v1.31.1 () built-in shell (ash)

_______                     ________        __

| |.—–.—–.—–.| | | |.—-.| |_
| - || _ | -| || | | || _|| _|
|
_|| |_||||||| ||

        |__| W I R E L E S S   F R E E D O M

—————————————————– SuperWRT SNAPSHOT, r14664-156b72b9aa


root@swrt:~#
root@swrt:~# logread -f
Sun Oct 25 04:04:19 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED f4:bf :80:45:b0:96
Sun Oct 25 04:04:41 2020 kern.err kernel: [ 1284.577725] ieee80211 phy0: cmd 0×9 125=BAStream timed out
Sun Oct 25 04:04:41 2020 kern.err kernel: [ 1284.583157] ieee80211 phy0: return code: 0×1125 Sun Oct 25 04:04:41 2020 kern.err kernel: [ 1284.587705] ieee80211 phy0: timeout : 0×1125 Sun Oct 25 04:04:41 2020 kern.debug kernel: [ 1284.591972] ieee80211 phy0: MACRE G_REG_INT_CODE: 0×0000 Sun Oct 25 04:05:01 2020 kern.err kernel: [ 1304.601351] ieee80211 phy0: cmd 0×9122=UpdateEncryption timed out
Sun Oct 25 04:05:01 2020 kern.err kernel: [ 1304.607475] ieee80211 phy0: return code: 0×1122 Sun Oct 25 04:05:01 2020 kern.err kernel: [ 1304.612039] ieee80211 phy0: timeout: 0×1122 Sun Oct 25 04:05:01 2020 kern.err kernel: [ 1304.616246] wlan0: failed to remove key (0, f4:bf:80:45:b0:96) from hardware (-5)
Sun Oct 25 04:05:01 2020 kern.debug kernel: [ 1304.624282] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:05:21 2020 kern.err kernel: [ 1324.621009] ieee80211 phy0: cmd 0×9111=SetNewStation timed out
Sun Oct 25 04:05:21 2020 kern.err kernel: [ 1324.626872] ieee80211 phy0: return code: 0×1111 Sun Oct 25 04:05:21 2020 kern.err kernel: [ 1324.631456] ieee80211 phy0: timeout: 0×1111 Sun Oct 25 04:05:21 2020 daemon.notice hostapd: nl80211: nl80211_recv_beacons→nl_recvmsgs failed: -5
Sun Oct 25 04:05:21 2020 daemon.info hostapd: wlan0: STA f4:bf:80:45:b0:96 IEEE 802.11: deauthenticated due to local deauth request
Sun Oct 25 04:05:21 2020 kern.debug kernel: [ 1324.638249] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:05:41 2020 kern.err kernel: [ 1344.654692] ieee80211 phy0: cmd 0x801c=80211RadioControl timed out
Sun Oct 25 04:05:41 2020 kern.err kernel: [ 1344.660908] ieee80211 phy0: return code: 0x001c
Sun Oct 25 04:05:41 2020 kern.err kernel: [ 1344.665456] ieee80211 phy0: timeout: 0x001c
Sun Oct 25 04:05:41 2020 daemon.notice hostapd: Remove interface ‘wlan0’ Sun Oct 25 04:05:41 2020 daemon.notice hostapd: wlan0: interface state ENABLED→DISABLED
Sun Oct 25 04:05:41 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 00:0
Sun Oct 25 04:05:41 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sun Oct 25 04:05:41 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sun Oct 25 04:05:41 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sun Oct 25 04:05:41 2020 daemon.err collectd[3056]: plugin_read_thread: read-function of the `iwinfo’ plugin took 62.271 seconds, which is above read interval (30.000 seconds). You might want to adjust the `Interval’ or `ReadThreads’ settings.
Sun Oct 25 04:05:41 2020 kern.info kernel: [ 1344.728857] device wlan0 left promiscuous mode
Sun Oct 25 04:05:41 2020 kern.info kernel: [ 1344.733375] br-lan: port 5(wlan0) entered disabled state
Sun Oct 25 04:05:41 2020 kern.debug kernel: [ 1344.769066] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:05:51 2020 daemon.notice netifd: radio0 (5952): Command failed: Request timed out
Sun Oct 25 04:05:55 2020 daemon.err uhttpd[2825]: luci: accepted login on / for root from 192.168.5.153
Sun Oct 25 04:06:01 2020 kern.err kernel: [ 1364.780388] ieee80211 phy0: cmd 0×9125=BAStream timed out
Sun Oct 25 04:06:01 2020 kern.err kernel: [ 1364.785813] ieee80211 phy0: return code: 0×1125 Sun Oct 25 04:06:01 2020 kern.err kernel: [ 1364.790370] ieee80211 phy0: timeout: 0×1125 Sun Oct 25 04:06:01 2020 kern.debug kernel: [ 1364.794609] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:06:21 2020 kern.err kernel: [ 1384.808104] ieee80211 phy0: cmd 0×9122=UpdateEncryption timed out
Sun Oct 25 04:06:21 2020 kern.err kernel: [ 1384.814227] ieee80211 phy0: return code: 0×1122 Sun Oct 25 04:06:21 2020 kern.err kernel: [ 1384.818785] ieee80211 phy0: timeout: 0×1122 Sun Oct 25 04:06:21 2020 kern.err kernel: [ 1384.822987] wlan0: failed to remove key (0, 0053:05) from hardware (-5)
Sun Oct 25 04:06:21 2020 kern.debug kernel: [ 1384.830595] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:06:41 2020 kern.err kernel: [ 1404.841802] ieee80211 phy0: cmd 0×9111=SetNewStation timed out
Sun Oct 25 04:06:41 2020 kern.err kernel: [ 1404.847662] ieee80211 phy0: return code: 0×1111 Sun Oct 25 04:06:41 2020 kern.err kernel: [ 1404.852219] ieee80211 phy0: timeout: 0×1111 Sun Oct 25 04:06:41 2020 kern.debug kernel: [ 1404.856494] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:07:01 2020 kern.err kernel: [ 1424.861434] ieee80211 phy0: cmd 0×9100=BssStart timed out
Sun Oct 25 04:07:01 2020 kern.err kernel: [ 1424.866858] ieee80211 phy0: return code: 0×1100 Sun Oct 25 04:07:01 2020 kern.err kernel: [ 1424.871418] ieee80211 phy0: timeout: 0×1100 Sun Oct 25 04:07:01 2020 kern.debug kernel: [ 1424.875624] ieee80211 phy0: change: 0×40 Sun Oct 25 04:07:01 2020 kern.debug kernel: [ 1424.879573] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:07:21 2020 kern.err kernel: [ 1444.891088] ieee80211 phy0: cmd 0×9114=SetApMode timed out
Sun Oct 25 04:07:21 2020 kern.err kernel: [ 1444.896600] ieee80211 phy0: return code: 0×1114 Sun Oct 25 04:07:21 2020 kern.err kernel: [ 1444.901159] ieee80211 phy0: timeout: 0×1114 Sun Oct 25 04:07:21 2020 kern.debug kernel: [ 1444.905360] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:07:41 2020 kern.err kernel: [ 1464.914770] ieee80211 phy0: cmd 0×8129=LinkAdaptCsMode timed out
Sun Oct 25 04:07:41 2020 kern.err kernel: [ 1464.920810] ieee80211 phy0: return code: 0×0129 Sun Oct 25 04:07:41 2020 kern.err kernel: [ 1464.925358] ieee80211 phy0: timeout: 0×0129 Sun Oct 25 04:07:41 2020 kern.debug kernel: [ 1464.929568] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:08:01 2020 kern.err kernel: [ 1484.928460] ieee80211 phy0: cmd 0×8120=80211hDetectRadar timed out
Sun Oct 25 04:08:01 2020 kern.err kernel: [ 1484.934670] ieee80211 phy0: return code: 0×0120 Sun Oct 25 04:08:01 2020 kern.err kernel: [ 1484.939228] ieee80211 phy0: timeout: 0×0120 Sun Oct 25 04:08:01 2020 kern.debug kernel: [ 1484.943430] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:08:21 2020 kern.err kernel: [ 1504.954202] ieee80211 phy0: cmd 0x810a=SetRfChannel timed out
Sun Oct 25 04:08:21 2020 kern.err kernel: [ 1504.959984] ieee80211 phy0: return code: 0x010a
Sun Oct 25 04:08:21 2020 kern.err kernel: [ 1504.964532] ieee80211 phy0: timeout: 0x010a
Sun Oct 25 04:08:21 2020 kern.debug kernel: [ 1504.968747] ieee80211 phy0: change: 0×100 Sun Oct 25 04:08:21 2020 kern.debug kernel: [ 1504.972773] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:08:42 2020 kern.err kernel: [ 1524.973915] ieee80211 phy0: cmd 0x801c=80211RadioControl timed out
Sun Oct 25 04:08:42 2020 kern.err kernel: [ 1524.980130] ieee80211 phy0: return code: 0x001c
Sun Oct 25 04:08:42 2020 kern.err kernel: [ 1524.984678] ieee80211 phy0: timeout: 0x001c
Sun Oct 25 04:08:42 2020 daemon.notice netifd: Network device ‘wlan0’ link is down
Sun Oct 25 04:08:42 2020 kern.debug kernel: [ 1524.990084] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:09:02 2020 kern.err kernel: [ 1544.989692] ieee80211 phy0: cmd 0×9122=UpdateEncryption timed out
Sun Oct 25 04:09:02 2020 kern.err kernel: [ 1544.995821] ieee80211 phy0: return code: 0×1122 Sun Oct 25 04:09:02 2020 kern.err kernel: [ 1545.000369] ieee80211 phy0: timeout: 0×1122 Sun Oct 25 04:09:02 2020 kern.err kernel: [ 1545.004570] wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-5)
Sun Oct 25 04:09:02 2020 kern.debug kernel: [ 1545.012464] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:09:22 2020 kern.err kernel: [ 1565.023490] ieee80211 phy0: cmd 0×9111=SetNewStation timed out
Sun Oct 25 04:09:22 2020 kern.err kernel: [ 1565.029358] ieee80211 phy0: return code: 0×1111 Sun Oct 25 04:09:22 2020 kern.err kernel: [ 1565.033906] ieee80211 phy0: timeout: 0×1111 Sun Oct 25 04:09:22 2020 kern.debug kernel: [ 1565.038164] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:09:42 2020 kern.err kernel: [ 1585.033299] ieee80211 phy0: cmd 0x801c=80211RadioControl timed out
Sun Oct 25 04:09:42 2020 kern.err kernel: [ 1585.039519] ieee80211 phy0: return code: 0x001c
Sun Oct 25 04:09:42 2020 kern.err kernel: [ 1585.044070] ieee80211 phy0: timeout: 0x001c
Sun Oct 25 04:09:42 2020 kern.debug kernel: [ 1585.048285] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:09:42 2020 daemon.debug dnsmasq[3734]: stopped listening on wlan0(#21): f0d:10d1%wlan0 port 53
Sun Oct 25 04:09:42 2020 daemon.err nlbwmon[5172]: Netlink receive failure: Out of memory
Sun Oct 25 04:09:42 2020 daemon.err nlbwmon[5172]: Unable to dump conntrack: No buffer space available
Sun Oct 25 04:09:42 2020 daemon.err collectd[3056]: plugin_read_thread: read-function of the `iwinfo’ plugin took 238.479 seconds, which is above its read interval (30.000 seconds). You might want to adjust the `Interval’ or `ReadThreads’ settings.
Sun Oct 25 04:09:42 2020 daemon.notice hostapd: wlan1: interface state ENABLED→DISABLED
Sun Oct 25 04:09:42 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sun Oct 25 04:09:42 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sun Oct 25 04:09:42 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sun Oct 25 04:09:42 2020 kern.info kernel: [ 1585.235380] device wlan1 left promiscuous mode
Sun Oct 25 04:09:42 2020 kern.info kernel: [ 1585.239902] br-lan: port 6(wlan1) entered disabled state
Sun Oct 25 04:09:42 2020 kern.debug kernel: [ 1585.304638] ieee80211 phy1: change: 0×40 Sun Oct 25 04:09:42 2020 kern.debug kernel: [ 1585.355285] ieee80211 phy1: change: 0×100 Sun Oct 25 04:09:42 2020 daemon.notice netifd: Network device ‘wlan1’ link is down
Sun Oct 25 04:09:42 2020 daemon.debug dnsmasq[3734]: stopped listening on wlan1(#22): fe:10d0%wlan1 port 53
Sun Oct 25 04:09:42 2020 daemon.notice netifd: radio1 (6077): Command failed: Not found
Sun Oct 25 04:09:47 2020 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy wlan1) –> new PHY
Sun Oct 25 04:09:47 2020 kern.debug kernel: [ 1590.515230] ieee80211 phy1: change: 0xffffffff
Sun Oct 25 04:09:47 2020 kern.info kernel: [ 1590.579817] br-lan: port 5(wlan1) entered blocking state
Sun Oct 25 04:09:47 2020 kern.info kernel: [ 1590.585173] br-lan: port 5(wlan1) entered disabled state
Sun Oct 25 04:09:47 2020 kern.info kernel: [ 1590.590650] device wlan1 entered promiscuous mode
Sun Oct 25 04:09:47 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED→COUNTRY_UPDATE
Sun Oct 25 04:09:47 2020 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy wlan0) –> new PHY
Sun Oct 25 04:09:47 2020 kern.debug kernel: [ 1590.597565] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:09:47 2020 kern.debug kernel: [ 1590.602837] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:10:07 2020 kern.err kernel: [ 1610.599047] ieee80211 phy0: cmd 0×8203=SetRateAdaptationMode timed out
Sun Oct 25 04:10:07 2020 kern.err kernel: [ 1610.605616] ieee80211 phy0: return code: 0×0203 Sun Oct 25 04:10:07 2020 kern.err kernel: [ 1610.610166] ieee80211 phy0: timeout: 0×0203 Sun Oct 25 04:10:07 2020 kern.debug kernel: [ 1610.614369] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:10:07 2020 daemon.err hostapd: Could not set interface wlan0 flags (UP): I/O error
Sun Oct 25 04:10:07 2020 daemon.err hostapd: nl80211: Could not set interface ‘wlan0’ UP
Sun Oct 25 04:10:07 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sun Oct 25 04:10:07 2020 daemon.err hostapd: nl80211 driver initialization failed.
Sun Oct 25 04:10:07 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sun Oct 25 04:10:07 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn’t started
Sun Oct 25 04:10:07 2020 daemon.notice netifd: radio0 (6041): Command failed: Invalid argument
Sun Oct 25 04:10:07 2020 kern.debug kernel: [ 1610.679517] ieee80211 phy1: change: 0×100 Sun Oct 25 04:10:07 2020 kern.debug kernel: [ 1610.692221] ieee80211 phy1: change: 0×42 Sun Oct 25 04:10:07 2020 kern.info kernel: [ 1610.815045] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sun Oct 25 04:10:07 2020 kern.info kernel: [ 1610.821506] br-lan: port 5(wlan1) entered blocking state
Sun Oct 25 04:10:07 2020 kern.info kernel: [ 1610.826854] br-lan: port 5(wlan1) entered forwarding state
Sun Oct 25 04:10:07 2020 daemon.notice netifd: Network device ‘wlan1’ link is up
Sun Oct 25 04:10:07 2020 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE→ENABLED
Sun Oct 25 04:10:07 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sun Oct 25 04:10:08 2020 kern.debug kernel: [ 1611.658311] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:10:08 2020 kern.debug kernel: [ 1611.663573] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:10:28 2020 kern.err kernel: [ 1631.666840] ieee80211 phy0: cmd 0×8203=SetRateAdaptationMode timed out
Sun Oct 25 04:10:28 2020 kern.err kernel: [ 1631.673404] ieee80211 phy0: return code: 0×0203 Sun Oct 25 04:10:28 2020 kern.err kernel: [ 1631.677961] ieee80211 phy0: timeout: 0×0203 Sun Oct 25 04:10:28 2020 kern.debug kernel: [ 1631.682164] ieee80211 phy0: MACREG_REG_INT_CODE: 0×0000 Sun Oct 25 04:10:28 2020 daemon.notice netifd: radio0 (6041): RTNETLINK answers: I/O error
Sun Oct 25 04:10:28 2020 daemon.notice netifd: radio0 (6041): Interface 0 setup failed: IFUP_ERROR
Sun Oct 25 04:10:28 2020 daemon.debug dnsmasq[3734]: listening on wlan1(#25): fe8:10d0%wlan1 port 53

14.10.20203386KernelBug ReportVery LowHighRegression: Broadcom Roboswitch B53TrunkUnconfirmed Task Description

Hi,

in the current trunk version, Broadcom Roboswitch will not work for certain router models. However, in the past it did work.

Building OpenWrt from scratch results in a working switch with v17.01.5 (from 15 Jul 2018 21:25:16) for target profile “Broadcom SOC, BCM43xx Wifi (brcmsmac)”. Building OpenWrt from scratch for v18.06.0 (from 30 Jul 2018 18:44:34) results in the switch not working for the same target. So the problematic commit must have been between 15 Jul 2018 and 30 Jul 2018, and the problem is still present today.


For v17.01.5

# dmesg | grep switch
[    3.596260] bgmac_bcma bcma0:2: Support for Roboswitch not implemented
[    3.683106] b53_common: found switch: BCM5325, rev 4

Despite the message “Roboswitch not implemented” the switch comes up automatically and I can ping other computers connected through the switch.

# swconfig dev switch0 show
Global attributes:
        enable_vlan: 1
        ports: 0x003f
Port 0:
        pvid: 2
        link: port:0 link:down
Port 1:
        pvid: 1
        link: port:1 link:down
Port 2:
        pvid: 1
        link: port:2 link:down
Port 3:
        pvid: 1
        link: port:3 link:up speed:100baseT full-duplex auto
Port 4:
        pvid: 1
        link: port:4 link:down
Port 5:
        pvid: 0
        link: port:5 link:up speed:100baseT full-duplex
VLAN 1:
        ports: 1 2 3 4 5t
VLAN 2:
        ports: 0 5t

For v18.06.0

# dmesg | grep switch
[    4.174603] bgmac_bcma bcma0:2: Support for Roboswitch not implemented
[    4.275337] b53_common: unsupported switch detected (BCM5304/BCM4)
[    4.281640] Broadcom B53 (2) bcma_mdio-0-0:1e: failed to register switch: -22

The switch does not come up and thus I cannot ping.


I tested this for the (unsuported) router Huawei B593u-12. You can find details about the router, logs, etc. under https://openwrt.org/toh/huawei/b593u-12

This also seems to address other routers, e.g. ZTE H218N, see https://forum.openwrt.org/t/b53-failed-to-detect-switch-on-bcm5358/20011

12.10.20203382KernelBug ReportVery LowHighmikrotik: rb-nor-flash-16M-ac-initramfs-kernel.bin does...openwrt-19.07Unconfirmed Task Description

Booting openwrt-19.07.4-ar71xx-mikrotik-rb-nor-flash-16M-ac-initramfs-kernel.bin via tftp. Relevant dmesg chunk at driver load demonstrating that only 2.4GHz interface is detected:

Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.257636] ath: EEPROM regdomain: 0×0 Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.257643] ath: EEPROM indicates default country code should be used
Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.257646] ath: doing EEPROM country→regdmn map search
Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.257659] ath: country maps to regdmn code: 0x3a
Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.257663] ath: Country alpha2 being used: US
Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.257666] ath: Regpair used: 0x3a
Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.274863] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’ Tue Sep 8 07:29:00 2020 kern.info kernel: [ 10.276460] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47

09.10.20203373Base systemBug ReportVery LowHighIPV6 flow offload brokenTrunkUnconfirmed Task Description

Enabling this option makes the ipv6 connection unstable.

Example: connecting to #openwrt-devel from hexchat (Ubuntu) makes you constantly disconnect.
Disabling flow offload makes the connection stable.


23.09.20203358PackagesBug ReportVery LowHighiwinfo.scan ubus call failed with latest uhttpdTrunkUnconfirmed Task Description

With latest uhttpd package (2020-09-18), the wireless scan failed in our MT7688 devices (ramps mt76x8). The original uhttpd (2020-08-05-212f8364) version works before.

The iwinfo.scan is using the nobatch=true flag when calling rpc.declare (luci/modules/luci-base/htdocs/luci-static/resources/network.js:83)

19.09.20203350KernelBug ReportVery LowHighKernel Warning in module mac80211/tx.copenwrt-19.07Unconfirmed Task Description

Hi,

I am using the following with the latest update of openwrt:

Model Netgear R6220
Architecture MediaTek MT7621 ver:1 eco:3
Firmware Version OpenWrt 19.07.4 r11208-ce6496d796 / LuCI openwrt-19.07 branch git-20.260.30581-915a64c
Kernel Version 4.14.195

The problem occured already with 19.07.3 several times, so I upgraded to 19.07.4, but the problem remains.
The wifi module kept crashing and in consequence a part of the wifi devices cannot connect anymore. Sometimes the router
recovers by itself, sometimes not and a reboot is necessary to get wifi working again. It mostly affects the 2,4 GHz band
and not the 5 GHz band, but that might be related which device is renewing DHCP or which ones are not (I am not sure).
A reboot solves the problem, but after some time, the problem occurs again. After the below warning, the router runs without
further problems for 2 days now. So it seems pretty rare. Nevertheless, the same hardware was working fine with 18.x
openwrt for a year at least. No kernel warning at the time. I cannot completely rule out that the HW is broken as it is
of age, as you can see. Any hint on what I should report or test myself is welcome! I can help debug and even install
updates that should fix the problem, if necessary. The router ist just used as an access point - routing is taking
place elsewhere.

Here is the korresponding kernel warning, where I included the immediate log entries before and after:

Thu Sep 17 22:02:05 2020 daemon.notice hostapd: wlan1: DFS-RADAR-DETECTED freq=5680 ht_enabled=1 chan_offset=-1 chan_width=2 cf1=5670 cf2=0
Thu Sep 17 22:02:05 2020 daemon.notice hostapd: wlan1: DFS-NEW-CHANNEL freq=5220 chan=44 sec_chan=1
Thu Sep 17 22:02:05 2020 daemon.info hostapd: wlan1: IEEE 802.11 driver starting channel switch: freq=5220, ht=1, vht_ch=0×0, offset=1, width=2 (40 MHz), cf1=5230, cf2=0
Thu Sep 17 22:02:05 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-STARTED-CHANNEL-SWITCH freq=5220 ht_enabled=1 ch_offset=1 ch_width=40 MHz cf1=5230 cf2=0 dfs=0
Thu Sep 17 22:02:06 2020 daemon.info hostapd: wlan1: IEEE 802.11 driver had channel switch: freq=5220, ht=1, vht_ch=0×0, offset=1, width=2 (40 MHz), cf1=5230, cf2=0
Thu Sep 17 22:02:06 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-CHANNEL-SWITCH freq=5220 ht_enabled=1 ch_offset=1 ch_width=40 MHz cf1=5230 cf2=0 dfs=0
Thu Sep 17 22:02:06 2020 daemon.notice hostapd: wlan1: AP-CSA-FINISHED freq=5220 dfs=0
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.685439] ————[ cut here ]———— Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.694747] WARNING: CPU: 1 PID: 14 at backports-4.19.137-1/net/mac80211/tx.c:4292 0x877acbc4 [mac80211@87780000+0x6cca0]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.716632] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_netlink nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT slhc nfnetlink nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.858467] usbcore nls_base usb_common
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.866285] CPU: 1 PID: 14 Comm: ksoftirqd/1 Not tainted 4.14.195 #0
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.878915] Stack : 00000000 00000000 00000000 86dae9b0 00000000 00000000 00000000 00000000
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.895548] 00000000 00000000 00000000 00000000 00000000 00000001 87c67b70 53261622
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.912178] 87c67c08 00000000 00000000 00006298 00000038 8049c858 00000008 00000000
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.928810] 00000000 80550000 000d37ed 00000000 87c67b50 00000000 00000000 877e7fd0
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.945442] 877acbc4 000010c4 86f0a480 86dae9b0 00000003 802ad210 00000004 806b0004
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.962073] ...
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.966931] Call Trace:
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.966973] [<8049c858>] 0x8049c858
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.978757] [<877acbc4>] 0x877acbc4 [mac80211@87780000+0x6cca0]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.990532] [<802ad210>] 0x802ad210
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7457.997462] [<8000c1a0>] 0x8000c1a0
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.004393] [<8000c1a8>] 0x8000c1a8
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.011325] [<804856b4>] 0x804856b4
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.018260] [<877acbc4>] 0x877acbc4 [mac80211@87780000+0x6cca0]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.030029] [<80072a84>] 0x80072a84
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.036956] [<8002e608>] 0x8002e608
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.043892] [<877acbc4>] 0x877acbc4 [mac80211@87780000+0x6cca0]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.055668] [<8002e6f0>] 0x8002e6f0
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.062600] [<80053b7c>] 0x80053b7c
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.069536] [<877acbc4>] 0x877acbc4 [mac80211@87780000+0x6cca0]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.081310] [<877af408>] 0x877af408 [mac80211@87780000+0x6cca0]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.093086] [<80067ca8>] 0x80067ca8
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.100018] [<80017f6c>] 0x80017f6c
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.106957] [<87777b90>] 0x87777b90 [mt76x02_lib@87770000+0×9700]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.119081] [<877af86c>] 0x877af86c [mac80211@87780000+0x6cca0]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.130870] [<87777bd0>] 0x87777bd0 [mt76x02_lib@87770000+0×9700]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.142999] [<877b65e0>] 0x877b65e0 [mac80211@87780000+0x6cca0]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.154789] [<877b66bc>] 0x877b66bc [mac80211@87780000+0x6cca0]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.166573] [<87774a94>] 0x87774a94 [mt76x02_lib@87770000+0×9700]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.178702] [<800329f4>] 0x800329f4
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.185630] [<804a3658>] 0x804a3658
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.192561] [<8004fd10>] 0x8004fd10
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.199494] [<8004fd10>] 0x8004fd10
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.206420] [<80032cc8>] 0x80032cc8
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.213348] [<8004feb8>] 0x8004feb8
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.220280] [<8049ebd8>] 0x8049ebd8
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.227208] [<8004bf38>] 0x8004bf38
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.234139] [<8004be08>] 0x8004be08
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.241070] [<8004be08>] 0x8004be08
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.248002] [<8004be08>] 0x8004be08
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.254933] [<80006f78>] 0x80006f78
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.261870]
Thu Sep 17 22:02:06 2020 kern.warn kernel: [ 7458.265166] —[ end trace 9a8b15fbb768cb19 ]— Thu Sep 17 22:02:06 2020 daemon.notice hostapd: wlan1: STA 6c:ad:f8:f1:5a:4b IEEE 802.11: did not acknowledge authentication response
Thu Sep 17 22:02:06 2020 daemon.notice hostapd: wlan1: STA 6c:ad:f8:f1:5a:4b IEEE 802.11: did not acknowledge authentication response

14.09.20203338Base systemBug ReportVery LowHighTL-WR841N v13 (ramips) unstable Ethernet and WiFi in 19...openwrt-19.07Unconfirmed Task Description

I am using default build of OpenWRT 19.07.4 for TL-WR841N v13 without any additional packages. I have Ethernet PPPoE from provider, some ethernet and WiFi WPA2 clients. WiFi and Ethernet are unstable: they can disappear for 30-60 seconds without any serious reason. On 18.06.8 there wasn’t those problems. I attached system log. Thanks for help.

Showing tasks 51 - 100 of 1078 Page 2 of 22 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing