OpenWrt/LEDE Project

Welcome to the OpenWrt/LEDE Project bug reporting and issue tracking system

Problems to be reported here are for the OpenWrt/LEDE Project targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt/LEDE Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to lede-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeverity  descSummaryReported InStatus
10.02.20192115KernelBug ReportVery LowCriticalkernel panic with Hardware flow offloading on ubnt-x (M...TrunkUnconfirmed Task Description

hardware ubnt-x (edgerouter-x)
openwrt: OpenWrt SNAPSHOT, r9293-e3311cb

I turn on hardware offload and system went south (hangup). Automatic hard
reset (by kernel itself or because of watchcat)
But syslogd logs to other machine and
this is what I found in logs:

Feb 10 21:04:59 thorgal kernel: [ 6300.830740]  (t=6003 jiffies g=60795 c=60794 q=1375)
Feb 10 21:04:59 thorgal kernel: [ 6300.860492] (detected by 1, t=6006 jiffies, g=60795, c=60794, q=1375)
Feb 10 21:04:59 thorgal kernel: [ 6300.863610] rcu_sched       I
Feb 10 21:04:59 thorgal kernel: [ 6300.884363] Sending NMI from CPU 1 to CPUs 3:
Feb 10 21:04:59 thorgal kernel: [ 6300.897157]     0     8      2 0x00100000
Feb 10 21:04:59 thorgal kernel: [ 6300.919637] Stack : 805b0000 8fc42bc0 8fc5fe30 8fc5fe30 81222380 8fc5fe30 805b0000 81222380
Feb 10 21:04:59 thorgal kernel: [ 6300.936268]         00000003 80086ddc 000912c6 81222380 81222380 8fc5fe30 805b0000 81222380
Feb 10 21:04:59 thorgal kernel: [ 6300.952899]         00000003 805ae1b8 805b6550 80491eec 00000001 8fc5fe30 805b0000 000912c6
Feb 10 21:04:59 thorgal kernel: [ 6300.969530]         81222380 80494e14 00000003 80082e28 805b0000 00000000 8fc5febc 00000001
Feb 10 21:04:59 thorgal kernel: [ 6300.986160]         00000000 812223f4 000912c6 8008732c 8fc42bc0 01c00001 00000001 805b6440
Feb 10 21:04:59 thorgal kernel: [ 6301.002793]         ...
Feb 10 21:04:59 thorgal kernel: [ 6301.007654] Call Trace:
Feb 10 21:04:59 thorgal kernel: [ 6301.012531] [<80491dcc>] __schedule+0x7ac/0x860
Feb 10 21:04:59 thorgal kernel: [ 6301.021543] [<80491eec>] schedule+0x6c/0x84
Feb 10 21:04:59 thorgal kernel: [ 6301.029863] [<80494e14>] schedule_timeout+0x17c/0x1b8
Feb 10 21:04:59 thorgal kernel: [ 6301.039912] [<80083444>] rcu_gp_kthread+0x560/0x950
Feb 10 21:04:59 thorgal kernel: [ 6301.049626] [<8004c1b8>] kthread+0x130/0x144
Feb 10 21:04:59 thorgal kernel: [ 6301.058120] [<8000b0d8>] ret_from_kernel_thread+0x14/0x1c
Feb 10 21:04:59 thorgal kernel: [ 6304.380977] NMI backtrace for cpu 3
Feb 10 21:04:59 thorgal kernel: [ 6304.387914] CPU: 3 PID: 2514 Comm: kworker/3:1 Not tainted 4.14.98 #0
Feb 10 21:04:59 thorgal kernel: [ 6304.400742] Workqueue: events rht_deferred_worker
Feb 10 21:04:59 thorgal kernel: [ 6304.410088] Stack : 8053ac44 8fc15d24 805b0000 8e9f3280 8053acd8 00000003 805b6440 805ae0ac
Feb 10 21:04:59 thorgal kernel: [ 6304.426716]         000000e0 800705fc 8ff0af3c 805b0947 805b0000 00000001 8fc15ce8 53261683
Feb 10 21:04:59 thorgal kernel: [ 6304.443343]         00000000 00000000 00000000 00003c40 00000000 000000dd 00000008 00000000
Feb 10 21:04:59 thorgal kernel: [ 6304.459969]         00000000 805b0000 00061d66 00000000 00000000 00000000 805d0000 00000003
Feb 10 21:04:59 thorgal kernel: [ 6304.476595]         805b6440 805ae0ac 000000e0 805b0000 00000000 802a4378 0000000c 8061000c
Feb 10 21:04:59 thorgal kernel: [ 6304.493222]         ...
Feb 10 21:04:59 thorgal kernel: [ 6304.498076] Call Trace:
Feb 10 21:04:59 thorgal kernel: [ 6304.502943] [<800106c0>] show_stack+0x58/0x100
Feb 10 21:04:59 thorgal kernel: [ 6304.511777] [<80478bfc>] dump_stack+0x9c/0xe0
Feb 10 21:04:59 thorgal kernel: [ 6304.520447] [<8047fa94>] nmi_cpu_backtrace+0xe4/0x108
Feb 10 21:04:59 thorgal kernel: [ 6304.530488] [<8047fb80>] nmi_trigger_cpumask_backtrace+0xc8/0x168
Feb 10 21:04:59 thorgal kernel: [ 6304.542606] [<80084dd8>] rcu_dump_cpu_stacks+0xc4/0x13c
Feb 10 21:04:59 thorgal kernel: [ 6304.552993] [<80084228>] rcu_check_callbacks+0x3b4/0x8b8
Feb 10 21:04:59 thorgal kernel: [ 6304.563560] [<800877a8>] update_process_times+0x34/0x7c
Feb 10 21:04:59 thorgal kernel: [ 6304.573963] [<8009838c>] tick_handle_periodic+0x34/0xd0
Feb 10 21:04:59 thorgal kernel: [ 6304.584364] [<803275e0>] gic_compare_interrupt+0x70/0x80
Feb 10 21:04:59 thorgal kernel: [ 6304.594930] [<80077ba0>] handle_percpu_devid_irq+0xbc/0x1a8
Feb 10 21:04:59 thorgal kernel: [ 6304.606024] [<80071ef0>] generic_handle_irq+0x40/0x58
Feb 10 21:04:59 thorgal kernel: [ 6304.616071] [<8025339c>] gic_handle_local_int+0x9c/0xe8
Feb 10 21:04:59 thorgal kernel: [ 6304.626458] [<8025355c>] gic_irq_dispatch+0x10/0x20
Feb 10 21:04:59 thorgal kernel: [ 6304.636153] [<80071ef0>] generic_handle_irq+0x40/0x58
Feb 10 21:04:59 thorgal kernel: [ 6304.646199] [<80495fcc>] do_IRQ+0x1c/0x2c
Feb 10 21:04:59 thorgal kernel: [ 6304.654166] [<8025252c>] plat_irq_dispatch+0xfc/0x138
Feb 10 21:04:59 thorgal kernel: [ 6304.664209] [<8000b5e8>] except_vec_vi_end+0xb8/0xc4
Feb 10 21:04:59 thorgal kernel: [ 6304.674076] [<8006a94c>] queued_spin_lock_slowpath+0x1dc/0x2e0
Feb 10 21:04:59 thorgal kernel: [ 6304.685677] [<802386ac>] rht_deferred_worker+0x20c/0x4f0
Feb 10 21:04:59 thorgal kernel: [ 6304.696236] [<80046230>] process_one_work+0x258/0x400
Feb 10 21:04:59 thorgal kernel: [ 6304.706276] [<80046728>] worker_thread+0x350/0x5b4
Feb 10 21:04:59 thorgal kernel: [ 6304.715806] [<8004c1b8>] kthread+0x130/0x144
Feb 10 21:04:59 thorgal kernel: [ 6304.724291] [<8000b0d8>] ret_from_kernel_thread+0x14/0x1c
19.02.20192133KernelBug ReportVery LowCriticallan rx performance on IPQ806X (R7800) AllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on R7800
- Software versions of OpenWrt 18.06/Trunk

Firstly ,I found my ps4 download speed only 100mbps,so I’ve run iperf3
The lan rx work in problem ,tx works no problem.
One pair rx only 18mbps ten pair rx only 100mbps but tx can run in 1gbps.

So I change to offical 18.06.2 banch,rx is 400mbps ,tx is 1Gbps. Still in problem.
After I compile trunk banch ,it also WIP as 18.06 banch.

This problem also mentioned in FS#1598

22.02.20192140KernelBug ReportVery LowCriticalKernel hang when replace older uboot with uboot 2019 fo...TrunkUnconfirmed Task Description

Below is the log:

U-Boot 2019.01-00079-g3420a6fc6e-dirty (Feb 19 2019 - 17:19:16 +0800)

Qualcomm Atheros QCA9561 ver 1 rev 0
Model: AP152 Reference Board
DRAM:  128 MiB
Loading Environment from SPI Flash... SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB, mapped at 9f000000
*** Warning - bad CRC, using default environment

In:    uart@18020000
Out:   uart@18020000
Err:   uart@18020000
Net:   
Warning: eth@0x19000000 (eth0) using random MAC address - 56:87:3c:61:9b:50
eth0: eth@0x19000000
Hit any key to stop autoboot:  0 
ap152 # bootm 0x1f060000
## Booting kernel from Legacy Image at 1f060000 ...
   Image Name:   MIPS OpenWrt Linux-4.14.101
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1615030 Bytes = 1.5 MiB
   Load Address: 80060000
   Entry Point:  80060000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
[    0.000000] Linux version 4.14.101 (xxx@xxx-PC) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r8997-488af51f81)) #0 Mon Feb 18 15:11:32 2019
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] MIPS: machine is ROSINSON WR818
[    0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 123184K/131072K available (3777K kernel code, 150K rwdata, 912K rodata, 1232K init, 204K bss, 7888K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] CPU clock: 775.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
[    0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
[    0.008841] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.075897] pid_max: default: 32768 minimum: 301
[    0.081292] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.088805] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100195] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.111385] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.118370] pinctrl core: initialized pinctrl subsystem
[    0.125117] NET: Registered protocol family 16
[    0.152720] clocksource: Switched to clocksource MIPS
[    0.159331] NET: Registered protocol family 2
[    0.164932] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.172894] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.180116] TCP: Hash tables configured (established 1024 bind 1024)
[    0.187461] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.194136] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.201461] NET: Registered protocol family 1
[    0.209168] Crashlog allocated RAM at address 0x3f00000
[    0.216385] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.227688] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.234346] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.253234] io scheduler noop registered
[    0.257682] io scheduler deadline registered (default)
[    0.263810] ar7200-usb-phy usb-phy: phy reset is missing
[    0.271331] pinctrl-single 1804002c.pinmux: 544 pins at pa b804002c size 68
[    0.280201] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.288040] console [ttyS0] disabled
[    0.292122] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 8, base_baud = 1562500) is a 16550A
[    0.301943] console [ttyS0] enabled
[    0.301943] console [ttyS0] enabled
[    0.309500] bootconsole [early0] disabled
[    0.309500] bootconsole [early0] disabled
[    0.332542] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.337492] 5 fixed-partitions partitions found on MTD device spi0.0
[    0.344060] Creating 5 MTD partitions on "spi0.0":
[    0.349014] 0x000000000000-0x000000040000 : "u-boot"
[    0.354834] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.360944] 0x000000050000-0x000000060000 : "factory"
[    0.366831] 0x000000060000-0x000000fe0000 : "firmware"
[    0.374973] 2 uimage-fw partitions found on MTD device firmware
[    0.381090] Creating 2 MTD partitions on "firmware":
[    0.386258] 0x000000000000-0x000000190000 : "kernel"
[    0.392027] 0x000000190000-0x000000f80000 : "rootfs"
[    0.397783] mtd: device 5 (rootfs) set to be root filesystem
[    0.403703] 1 squashfs-split partitions found on MTD device rootfs
[    0.410095] 0x000000440000-0x000000f80000 : "rootfs_data"
[    0.416295] 0x000000ff0000-0x000001000000 : "art"
[    0.422691] libphy: Fixed MDIO Bus: probed
[    0.763078] libphy: ag71xx_mdio: probed
[    0.770036] switch0: Atheros AR8337 rev. 2 switch registered on mdio-bus.0
[    1.424526] ag71xx 19000000.eth: invalid MAC address, using random address
[    1.763882] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
[    1.775479] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:SGMII
[    1.783515] NET: Registered protocol family 10
[    1.791439] Segment Routing with IPv6
[    1.795358] NET: Registered protocol family 17
[    1.799984] 8021q: 802.1Q VLAN Support v1.8
[    1.810014] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    1.824049] Freeing unused kernel memory: 1232K
[    1.828729] This architecture does not have kernel memory protection.

By the way, for the ath79 target(linux-4.14) after I enable CONFIG_MIPS32R2_IRQ_VI options, it works fine.
But still hang in ar71xx(linux-4.9.158).

11.06.20192316KernelBug ReportVery LowCriticalKernel's iptables crash unexpectedlyTrunkWaiting on reporter Task Description

<Xiaomi Mi Router 3G / OpenWrt SNAPSHOT, r10173-6b762dd>
My router sometimes restart unexpectedly with no reason. Here’s the kernel’s crash log (/sys/kernel/debug/crashlog)

<0>[12930.571103] usercopy: kernel memory overwrite attempt detected to c2651000 (kmalloc-2048) (5408 bytes)
<4>[12930.580437] Kernel bug detected[#1]:
<4>[12930.584007] CPU: 2 PID: 28709 Comm: iptables Not tainted 4.14.123 #0
<4>[12930.590333] task: 8186ddc0 task.stack: 81fe4000
<4>[12930.594840] $ 0   : 00000000 00000001 0000005a 00000000
<4>[12930.600054] $ 4   : 8122d33c 8122d33c 81231e78 00007388
<4>[12930.605266] $ 8   : 00000000 00000194 00000008 00000000
<4>[12930.610476] $12   : 00000000 805c0000 0008b6df 00000000
<4>[12930.615697] $16   : c2651000 00001520 00000000 c2652520
<4>[12930.620906] $20   : 006678e0 00001548 00000000 77fca000
<4>[12930.626115] $24   : 00000001 802ab558
<4>[12930.631326] $28   : 81fe4000 81fe5dc0 00000000 80116360
<4>[12930.636539] Hi    : 00000124
<4>[12930.639403] Lo    : 74e58000
<4>[12930.642286] epc   : 80116360 __check_object_size+0x1b0/0x1e0
<4>[12930.647921] ra    : 80116360 __check_object_size+0x1b0/0x1e0
<4>[12930.653549] Status: 11007c03      KERNEL EXL IE
<4>[12930.657721] Cause : 50800024 (ExcCode 09)
<4>[12930.661707] PrId  : 0001992f (MIPS 1004Kc)
<4>[12930.665796] Modules linked in: pppoe ppp_async pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp
<4>[12930.736837]  nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat fuse sch_cake nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter
<4>[12930.808159]  ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip_gre gre ifb ip_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 sha1_generic ecb usb_storage sd_mod scsi_mod ext4 mbcache jbd2 crc32c_generic leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
<4>[12930.835248] Process iptables (pid: 28709, threadinfo=81fe4000, task=8186ddc0, tls=77fd8eb8)
<4>[12930.843554] Stack : 818c0040 8055090c 8055e4c8 c2651000 8054f124 00001520 00000000 00001520
<4>[12930.851887]         c2651000 00667908 805d9980 8ead1c3c 818c0000 818c0040 c264e000 805b0000
<4>[12930.860223]         805b0000 805e0000 00000041 8f1b9c98 805d9980 c264e000 0066a000 81fe5e34
<4>[12930.868560]         8adcd004 006663b0 81840040 805d9980 00000000 00000000 746c6966 00007265
<4>[12930.876894]         00000000 00000000 00000000 00000000 00000000 00000000 00000152 00000000
<4>[12930.885244]         ...
<4>[12930.887733] Call Trace:
<4>[12930.890172] [<80116360>] __check_object_size+0x1b0/0x1e0
<4>[12930.895540] [<8ead1c3c>] xt_copy_counters_from_user+0xac/0x158 [x_tables]
<4>[12930.902322] [<8f1b9c98>] ipt_register_table+0x508/0xdf8 [ip_tables]
<4>[12930.908568] Code: 02003825  0c01d530  24840924 <000c000d> 8fb30028  8fb20024  8fb10020  8fb0001c  03e00008
<4>[12930.918296]
<4>[12930.920137] ---[ end trace 0d59c51a87e12512 ]---
28.11.20192638KernelBug ReportVery LowCriticalNot enough host controller resources for new device sta...AllUnconfirmed Task Description

After connecting the usb hub and two identical e3372h modems, receives the following error:

kern.info kernel: [ 4313.927551] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
kern.info kernel: [ 4313.963934] hub 2-1:1.0: USB hub found
kern.info kernel: [ 4313.968328] hub 2-1:1.0: 4 ports detected
kern.info kernel: [ 4314.107232] usb 1-1: new high-speed USB device number 16 using xhci-mtk
kern.info kernel: [ 4314.309707] hub 1-1:1.0: USB hub found
kern.info kernel: [ 4314.314024] hub 1-1:1.0: 4 ports detected
kern.err kernel: [ 4315.449126] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
kern.info kernel: [ 4323.227134] usb 1-1.1: new high-speed USB device number 19 using xhci-mtk
kern.info kernel: [ 4323.359684] usb-storage 1-1.1:1.0: USB Mass Storage device detected
kern.info kernel: [ 4323.366475] scsi host3: usb-storage 1-1.1:1.0
kern.info kernel: [ 4323.667042] usb 1-1.4: new high-speed USB device number 20 using xhci-mtk
kern.warn kernel: [ 4323.799302] usb 1-1.4: Not enough host controller resources for new device state.
kern.err kernel: [ 4323.806875] usb 1-1.4: can't set config #1, error -12
kern.info kernel: [ 4324.317141] usb 2-1: USB disconnect, device number 2
kern.notice kernel: [ 4324.428273] scsi 3:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
kern.notice kernel: [ 4324.441876] scsi 3:0:0:1: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
kern.notice kernel: [ 4324.469348] sd 3:0:0:1: [sdb] Attached SCSI removable disk
kern.info kernel: [ 4324.667338] usb 2-1: new SuperSpeed USB device number 3 using xhci-mtk
kern.info kernel: [ 4324.703318] hub 2-1:1.0: USB hub found
kern.info kernel: [ 4324.707765] hub 2-1:1.0: 4 ports detected
kern.info kernel: [ 4324.975384] usb 1-1.1: USB disconnect, device number 19
kern.info kernel: [ 4325.377043] usb 1-1.1: new high-speed USB device number 21 using xhci-mtk
kern.warn kernel: [ 4325.508714] usb 1-1.1: Not enough host controller resources for new device state.
kern.err kernel: [ 4325.516294] usb 1-1.1: can't set config #1, error -12
kern.info kernel: [ 4332.655468] usb 1-1.4: USB disconnect, device number 20
kern.info kernel: [ 4333.567032] usb 1-1.4: new high-speed USB device number 22 using xhci-mtk
kern.info kernel: [ 4333.699727] usb-storage 1-1.4:1.0: USB Mass Storage device detected
kern.info kernel: [ 4333.706535] scsi host3: usb-storage 1-1.4:1.0
kern.info kernel: [ 4334.703592] usb 1-1.4: USB disconnect, device number 22
kern.info kernel: [ 4335.106995] usb 1-1.4: new high-speed USB device number 23 using xhci-mtk
kern.warn kernel: [ 4335.238608] usb 1-1.4: Not enough host controller resources for new device state.
kern.err kernel: [ 4335.246174] usb 1-1.4: can't set config #1, error -12
kern.info kernel: [ 4335.254656] usb 1-1.1: USB disconnect, device number 21
kern.info kernel: [ 4335.556999] usb 1-1.1: new high-speed USB device number 24 using xhci-mtk
kern.warn kernel: [ 4335.689333] usb 1-1.1: Not enough host controller resources for new device state.
kern.err kernel: [ 4335.697209] usb 1-1.1: can't set config #1, error -12
kern.info kernel: [ 4338.571247] usb 2-1: USB disconnect, device number 3
kern.info kernel: [ 4338.937429] usb 2-1: new SuperSpeed USB device number 4 using xhci-mtk
kern.info kernel: [ 4338.973068] hub 2-1:1.0: USB hub found
kern.info kernel: [ 4338.977396] hub 2-1:1.0: 4 ports detected
28.11.20192639KernelBug ReportVery LowCriticalkernel oops when visit a invalid virtual addressTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

 youku-l2

- Software versions of OpenWrt/LEDE release, packages, etc.

 snapshot. at 
 Linux OpenWrt 4.14.155 #0 SMP Sun Nov 24 22:17:34 2019 mips GNU/Linux

- Steps to reproduce

 I don't know. but this problem occurs, from the device reboot, after several hours or one or two days, the oops occurs. 
 
BusyBox v1.31.1 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r11591-c5497ebb1c
 -----------------------------------------------------
root@OpenWrt:~# cat /sys/kernel/debug/crashlog
Time: 1574977671.59411
Modules:        pppoe@8ee64000+22f0     ppp_async@8efa2000+1bc0 pppox@8e8de000+58a       ppp_generic@8e9f8000+5c82        nf_conntrack_ipv6@8f094000+15c0 mt76x2e@8f0ec000+2910    mt76x2_common@8f0f0000+2d88      mt76x02_lib@8f150000+a421       mt7603e@8ef30000+96cc    mt76@8e978000+7f5d       mac80211@8e900000+77c89 iptable_nat@8eff6000+3b0                 ipt_REJECT@8f023000+410  ipt_MASQUERADE@8e80b000+2f0     cfg80211@8ef40000+3f4f9          xt_time@8f0ba000+730     xt_tcpudp@8f0b7000+750  xt_state@8f0b4000+310   xt_nat@8f0b0000+650       xt_multiport@8f0a7000+550       xt_mark@8f0a4000+2f0    xt_mac@8f0a0000+2b0      xt_limit@8f09e000+4f0    xt_conntrack@8f07e000+910       xt_comment@8f067000+230          xt_TCPMSS@8e8d7000+b30   xt_REDIRECT@8f09c000+310        xt_LOG@8e8fb000+350              xt_FLOWOFFLOAD@8e8f8000+c30      xt_CT@8e8f5000+ab0      slhc@8f090000+14bb               nf_reject_ipv4@8ef96000+903      nf_nat_redirect@8ef9a000+63b    nf_nat_masquerade_ipv4@8ef9d000+71c       nf_conntrack_ipv4@8f064000+1450 nf_nat_ipv4@8e8b0000+1031                nf_nat@8f080000+3a7c     nf_log_ipv4@8efd5000+df0        nf_flow_table_hw@8e8e5000+920    nf_flow_table@8efb8000+367f      nf_defrag_ipv6@8efb2000+147e    nf_defrag_ipv4@8e8e8000+4b6       nf_conntrack_rtcache@8e8ea000+b10       nf_conntrack@8ef80000+11bca              iptable_mangle@8e8d8000+470      iptable_filter@8f7ed000+3d0     ip_tables@8e8d4000+2bdd  crc_ccitt@8e80e000+42b   compat@8e8d0000+1de4    ledtrig_usbport@8f7e4000+b00             nf_log_ipv6@8e8c6000+10d0        nf_log_common@8f001000+baf      ip6table_mangle@8f76b000+570      ip6table_filter@8f75e000+3d0    ip6_tables@8e8c0000+2ae1        ip6t_REJECT@8efc7000+450  x_tables@8efdc000+38af  nf_reject_ipv6@8eff7000+ac8     leds_gpio@8f794000+bb0   xhci_plat_hcd@8f790000+1650      xhci_pci@8f72e000+c30   xhci_mtk@8f7f2000+1490           xhci_hcd@8f7a0000+16e09  gpio_button_hotplug@8f78e000+1ad0       usbcore@8f7c0000+21591   nls_base@8f734000+1570   usb_common@8ffe1000+a37
<6>[    2.021026] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
<6>[    2.027787] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
<6>[    2.034511] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
<6>[    2.041702] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
<6>[    2.048423] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
<6>[    2.055183] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
<6>[    2.061894] pci 0000:00:00.0: PCI bridge to [bus 01]
<6>[    2.066846] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
<6>[    2.073574] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
<6>[    2.080852] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
<6>[    2.087987] pci 0000:00:01.0: PCI bridge to [bus 02]
<6>[    2.092933] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
<6>[    2.099653] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff pref]
<6>[    2.108218] clocksource: Switched to clocksource GIC
<6>[    2.114767] NET: Registered protocol family 2
<6>[    2.119945] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    2.126839] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
<6>[    2.133270] TCP: Hash tables configured (established 2048 bind 2048)
<6>[    2.139690] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    2.145452] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    2.151946] NET: Registered protocol family 1
<7>[    2.156268] PCI: CLS 0 bytes, default 32
<6>[    2.388167] 4 CPUs re-calibrate udelay(lpj = 2924544)
<4>[    2.394747] Crashlog allocated RAM at address 0x3f00000
<6>[    2.400168] workingset: timestamp_bits=14 max_order=16 bucket_order=2
<6>[    2.414833] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    2.420603] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<5>[    2.431036] random: fast init done
<6>[    2.434139] io scheduler noop registered
<6>[    2.438310] io scheduler deadline registered (default)
<6>[    2.444494] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
<6>[    2.454582] console [ttyS0] disabled
<6>[    2.458130] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
<6>[    2.467147] console [ttyS0] enabled
<6>[    2.474027] bootconsole [early0] disabled
<4>[    2.484276] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
<6>[    2.491904] spi-mt7621 1e000b00.spi: sys_freq: 220000000
<6>[    2.498139] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
<5>[    2.503281] 4 fixed-partitions partitions found on MTD device spi0.0
<5>[    2.509651] Creating 4 MTD partitions on "spi0.0":
<5>[    2.514435] 0x000000000000-0x000000030000 : "u-boot"
<5>[    2.520678] 0x000000030000-0x000000040000 : "u-boot-env"
<5>[    2.527090] 0x000000040000-0x000000050000 : "factory"
<5>[    2.533241] 0x000000050000-0x000001000000 : "firmware"
<5>[    2.539665] 2 uimage-fw partitions found on MTD device firmware
<5>[    2.545569] Creating 2 MTD partitions on "firmware":
<5>[    2.550579] 0x000000000000-0x0000001ffad5 : "kernel"
<5>[    2.556604] 0x0000001ffad5-0x000000fb0000 : "rootfs"
<5>[    2.562721] mtd: device 5 (rootfs) set to be root filesystem
<5>[    2.568570] 1 squashfs-split partitions found on MTD device rootfs
<5>[    2.574736] 0x000000430000-0x000000fb0000 : "rootfs_data"
<6>[    2.582044] libphy: Fixed MDIO Bus: probed
<6>[    2.650253] libphy: mdio: probed
<6>[    4.054512] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
<6>[    4.061238] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 22
<6>[    4.072283] NET: Registered protocol family 10
<6>[    4.078487] Segment Routing with IPv6
<6>[    4.082230] NET: Registered protocol family 17
<6>[    4.086730] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
<6>[    4.099677] 8021q: 802.1Q VLAN Support v1.8
<6>[    4.106481] hctosys: unable to open rtc device (rtc0)
<6>[    4.119110] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
<6>[    4.130502] Freeing unused kernel memory: 1260K
<4>[    4.135030] This architecture does not have kernel memory protection.
<14>[    4.872669] init: Console is alive
<14>[    4.876317] init: - watchdog -
<14>[    5.882569] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<6>[    6.029362] usbcore: registered new interface driver usbfs
<6>[    6.034945] usbcore: registered new interface driver hub
<6>[    6.040467] usbcore: registered new device driver usb
<4>[    6.054247] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
<4>[    6.062995] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
<6>[    6.071955] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
<6>[    6.077277] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
<6>[    6.088345] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
<6>[    6.097519] xhci-mtk 1e1c0000.xhci: irq 21, io mem 0x1e1c0000
<6>[    6.104357] hub 1-0:1.0: USB hub found
<6>[    6.108234] hub 1-0:1.0: 2 ports detected
<6>[    6.112875] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
<6>[    6.118241] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
<6>[    6.125705] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0  SuperSpeed
<6>[    6.132341] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[    6.141347] hub 2-0:1.0: USB hub found
<6>[    6.145168] hub 2-0:1.0: 1 port detected
<14>[    6.154150] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[    6.178545] init: - preinit -
<6>[    7.177582] mtk_soc_eth 1e100000.ethernet: PPE started
<5>[    7.252645] random: procd: uninitialized urandom read (4 bytes read)
<5>[   10.531863] jffs2: notice: (482) jffs2_build_xattr_subsystem: complete building xattr subsystem, 7 of xdatum (3 unchecked, 4 orphan) and 43 of xref (4 dead, 0 orphan) found.
<14>[   10.553355] mount_root: switching to jffs2 overlay
<4>[   10.576616] overlayfs: upper fs does not support tmpfile.
<12>[   10.592158] urandom-seed: Seeding with /etc/urandom.seed
<6>[   10.695023] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
<14>[   10.716965] procd: - early -
<14>[   10.719988] procd: - watchdog -
<14>[   11.368370] procd: - watchdog -
<14>[   11.371872] procd: - ubus -
<5>[   11.397531] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[   11.430071] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[   11.436790] random: ubusd: uninitialized urandom read (4 bytes read)
<14>[   11.444092] procd: - init -
<14>[   12.071546] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[   12.083773] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[   12.097818] Loading modules backported from Linux version v5.4-rc8-0-gaf42d3466bdc
<6>[   12.105474] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51
<6>[   12.114103] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[   12.126620] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
<6>[   12.177575] xt_time: kernel timezone is -0000
<4>[   12.240330] bus=0x1, slot = 0x0, irq=0xff
<6>[   12.244587] mt7603e 0000:01:00.0: ASIC revision: 76030010
<14>[   12.248691] urngd: v1.0.1 started.
<5>[   12.400941] random: crng init done
<5>[   12.404350] random: 6 urandom warning(s) missed due to ratelimiting
<6>[   13.279501] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
<6>[   13.285073] mt7603e 0000:01:00.0: Build Time: 20160107100755
<6>[   13.328226] mt7603e 0000:01:00.0: firmware init done
<7>[   13.500398] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<4>[   13.513858] bus=0x2, slot = 0x1, irq=0xff
<6>[   13.518248] mt76x2e 0000:02:00.0: ASIC revision: 76120044
<6>[   14.269373] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
<6>[   14.279042] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
<6>[   14.284520] mt76x2e 0000:02:00.0: Build: 1
<6>[   14.288650] mt76x2e 0000:02:00.0: Build Time: 201507311614____
<6>[   14.308213] mt76x2e 0000:02:00.0: Firmware running!
<7>[   14.315892] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
<6>[   14.323384] PPP generic driver version 2.4.2
<6>[   14.329343] NET: Registered protocol family 24
<14>[   14.337138] kmodloader: done loading kernel modules from /etc/modules.d/*
<6>[   18.442839] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
<6>[   20.695431] mtk_soc_eth 1e100000.ethernet: PPE started
<6>[   20.705271] br-lan: port 1(eth0.1) entered blocking state
<6>[   20.710862] br-lan: port 1(eth0.1) entered disabled state
<6>[   20.716991] device eth0.1 entered promiscuous mode
<6>[   20.721938] device eth0 entered promiscuous mode
<6>[   20.731335] br-lan: port 1(eth0.1) entered blocking state
<6>[   20.736800] br-lan: port 1(eth0.1) entered forwarding state
<6>[   20.743072] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
<6>[   21.504643] pppoe-wan: renamed from ppp0
<6>[   21.759034] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
<6>[   25.485868] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
<6>[   25.499062] br-lan: port 2(wlan1) entered blocking state
<6>[   25.504430] br-lan: port 2(wlan1) entered disabled state
<6>[   25.510505] device wlan1 entered promiscuous mode
<6>[   25.555437] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[   25.566445] br-lan: port 3(wlan0) entered blocking state
<6>[   25.571826] br-lan: port 3(wlan0) entered disabled state
<6>[   25.577853] device wlan0 entered promiscuous mode
<6>[   25.583186] br-lan: port 3(wlan0) entered blocking state
<6>[   25.588566] br-lan: port 3(wlan0) entered forwarding state
<6>[   26.063776] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[   26.077173] br-lan: port 4(wlan0-1) entered blocking state
<6>[   26.083073] br-lan: port 4(wlan0-1) entered disabled state
<6>[   26.089464] device wlan0-1 entered promiscuous mode
<6>[   26.099208] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
<6>[   26.105510] br-lan: port 4(wlan0-1) entered blocking state
<6>[   26.111095] br-lan: port 4(wlan0-1) entered forwarding state
<6>[   26.662628] br-lan: port 4(wlan0-1) entered disabled state
<6>[   26.669241] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
<6>[   26.676001] br-lan: port 2(wlan1) entered blocking state
<6>[   26.681401] br-lan: port 2(wlan1) entered forwarding state
<6>[   26.695246] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
<6>[   26.703001] br-lan: port 4(wlan0-1) entered blocking state
<6>[   26.708650] br-lan: port 4(wlan0-1) entered forwarding state
<6>[   26.723751] br-lan: port 5(wlan0-2) entered blocking state
<6>[   26.729417] br-lan: port 5(wlan0-2) entered disabled state
<6>[   26.735733] device wlan0-2 entered promiscuous mode
<6>[   26.742641] IPv6: ADDRCONF(NETDEV_UP): wlan0-2: link is not ready
<6>[   26.748867] br-lan: port 5(wlan0-2) entered blocking state
<6>[   26.754465] br-lan: port 5(wlan0-2) entered forwarding state
<6>[   27.177925] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-2: link becomes ready
<1>[159983.016519] CPU 1 Unable to handle kernel paging request at virtual address 07406000, epc == 801317c0, ra == 80131674
<4>[159983.027206] Oops[#1]:
<4>[159983.029559] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.155 #0
<4>[159983.035718] task: 8fc3c100 task.stack: 8fc5c000
<4>[159983.040314] $ 0   : 00000000 00000001 00000000 81266650
<4>[159983.045615] $ 4   : 806061fc 00000001 00000001 07406000
<4>[159983.050915] $ 8   : 000289b4 000289b3 00000000 00000001
<4>[159983.056211] $12   : 00000002 00000000 c0222b40 00009180
<4>[159983.061507] $16   : 8fc02a00 01090220 807a0000 8ea80000
<4>[159983.066803] $20   : 00000018 00000800 00000000 01080020
<4>[159983.072101] $24   : 3b9aca00 80008e2c
<4>[159983.077399] $28   : 8fc5c000 8fc0b9c8 00000000 80131674
<4>[159983.082697] Hi    : 00002665
<4>[159983.085647] Lo    : 94af5487
<4>[159983.088611] epc   : 801317c0 __kmalloc_track_caller+0x20c/0x290
<4>[159983.094591] ra    : 80131674 __kmalloc_track_caller+0xc0/0x290
<4>[159983.100478] Status: 11007c03     KERNEL EXL IE
<4>[159983.104737] Cause : 40800008 (ExcCode 02)
<4>[159983.108810] BadVA : 07406000
<4>[159983.111762] PrId  : 0001992f (MIPS 1004Kc)
<4>[159983.115920] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
<4>[159983.186680] Process swapper/1 (pid: 0, threadinfo=8fc5c000, task=8fc3c100, tls=00000000)
<4>[159983.194820] Stack : 80666658 8eec1e00 00000000 00000000 0000006c 8ee726c0 00000000 01080020
<4>[159983.203242]         8038772c 80383e60 00000000 00000000 284162c7 b901a8c0 fb0000e0 8ee726c0
<4>[159983.211663]         8ee726c0 00000000 00000740 00000018 8ef3cc00 8038772c 00000000 80600000
<4>[159983.220082]         00000004 00000000 00000000 8ef3cc00 8ee726c0 8ef77ab2 8ee726c0 00000018
<4>[159983.228504]         8ef3cc00 00000000 00000000 8e932214 000000e1 806061fc 8fc0bb44 8fc0bb4c
<4>[159983.236932]         ...
<4>[159983.239455] Call Trace:
<4>[159983.241987] [<801317c0>] __kmalloc_track_caller+0x20c/0x290
<4>[159983.247645] [<80383e60>] __kmalloc_reserve.isra.45+0x44/0xac
<4>[159983.253388] [<8038772c>] pskb_expand_head+0x8c/0x328
<4>[159983.258565] [<8e932214>] ieee80211_skb_resize+0x19c/0xde0 [mac80211]
<4>[159983.265045] [<8e932b44>] ieee80211_skb_resize+0xacc/0xde0 [mac80211]
<4>[159983.271514] [<8f080e1c>] nf_xfrm_me_harder+0x830/0xa90 [nf_nat]
<4>[159983.277497] Code: 00000000  8e020014  00e23821 <8ce20000> 10000012  cc400000  10400005  00000000  8e060010
<4>[159983.287311]
<4>[159983.289013] ---[ end trace de892621f972e570 ]---

===================================
Time: 1574977671.67638
root@OpenWrt:~#
 
26.12.20192695KernelBug ReportVery LowCriticalKernel panic during boot on Gehua ghl-r-001TrunkNew Task Description

See https://github.com/openwrt/openwrt/pull/2483

without this patch the ghl-r-001 cannot be boot.

reproduct in both 19.7-rc2 and git master.

26.02.20202863KernelBug ReportVery LowCriticalNo wireless - ath9k: probe of ar934x_wmac failed with e...TrunkUnconfirmed Task Description

TP-Link TL-WDR4300 v1
Atheros AR9344 rev 2
OpenWrt SNAPSHOT r12324-35890514bb

After firmware update the wireless interface stop working and system log display this errors:

[  775.566457] ath: phy2: Unable to initialize hardware; initialization status: -5
[  775.573947] ath9k ar934x_wmac: failed to initialize device
[  775.579593] ath9k: probe of ar934x_wmac failed with error -5
[  775.585511] pci 0000:00:00.0: using irq 40 for pin 1
[  775.594310] ath: phy3: Unable to initialize hardware; initialization status: -5
[  775.601780] ath9k 0000:00:00.0: Failed to initialize device
[  775.607518] ath9k: probe of 0000:00:00.0 failed with error -5

After removing the modules with:

rmmod ath9k
rmmod ath9k_common
rmmod ath9k_hw

And trying to load them back with:

insmod ath9k_common
insmod ath9k_hw
insmod ath9k

This messages show up:

[  837.091531] ath9k: ath9k: Driver unloaded
[  843.290249] ath9k: Unknown symbol ath9k_hw_stop_dma_queue (err 0)
[  843.296516] ath9k: Unknown symbol ath9k_hw_set_txpowerlimit (err 0)
[  843.303090] ath9k: Unknown symbol ath9k_hw_reset_calvalid (err 0)
[  843.309396] ath9k: Unknown symbol ath9k_hw_intrpend (err 0)
[  843.315144] ath9k: Unknown symbol ath9k_cmn_debug_modal_eeprom (err 0)
[  843.321888] ath9k: Unknown symbol ath9k_hw_enable_interrupts (err 0)
[  843.328450] ath9k: Unknown symbol ar9003_hw_bb_watchdog_check (err 0)
[  843.335112] ath9k: Unknown symbol ath9k_cmn_rx_accept (err 0)
[  843.341067] ath9k: Unknown symbol ath9k_hw_reset (err 0)
[  843.346548] ath9k: Unknown symbol ath9k_hw_abort_tx_dma (err 0)
[  843.352673] ath9k: Unknown symbol ath9k_hw_setuptxqueue (err 0)
[  843.358798] ath9k: Unknown symbol ath9k_hw_setuprxdesc (err 0)
[  843.364792] ath9k: Unknown symbol ath9k_hw_startpcureceive (err 0)
[  843.371183] ath9k: Unknown symbol ar9003_paprd_init_table (err 0)
[  843.377475] ath9k: Unknown symbol ath9k_hw_gpio_request_out (err 0)
[  843.383905] ath9k: Unknown symbol ath9k_hw_putrxbuf (err 0)
[  843.389669] ath9k: Unknown symbol ath9k_hw_check_nav (err 0)
[  843.395508] ath9k: Unknown symbol ath9k_hw_setmcastfilter (err 0)
[  843.401901] ath9k: Unknown symbol ath9k_hw_setpower (err 0)
[  843.407683] ath9k: Unknown symbol ath9k_hw_phy_disable (err 0)
[  843.413677] ath9k: Unknown symbol ath9k_cmn_rx_skb_postprocess (err 0)
[  843.420411] ath9k: Unknown symbol ath_dynack_sample_ack_ts (err 0)
[  843.426782] ath9k: Unknown symbol ath9k_cmn_beacon_config_sta (err 0)
[  843.433408] ath9k: Unknown symbol ath9k_hw_check_alive (err 0)
[  843.439430] ath9k: Unknown symbol ath9k_hw_setrxabort (err 0)
[  843.445338] ath9k: Unknown symbol ath9k_hw_txstart (err 0)
[  843.451017] ath9k: Unknown symbol ath9k_hw_gpio_free (err 0)
[  843.456886] ath9k: Unknown symbol ar9003_get_pll_sqsum_dvc (err 0)
[  843.463255] ath9k: Unknown symbol ar9003_is_paprd_enabled (err 0)
[  843.469560] ath9k: Unknown symbol ath9k_hw_set_rx_bufsize (err 0)
[  843.475828] ath9k: Unknown symbol ath9k_hw_updatetxtriglevel (err 0)
[  843.482398] ath9k: Unknown symbol ath9k_hw_beaconinit (err 0)
[  843.488395] ath9k: Unknown symbol ath9k_hw_set_tx_filter (err 0)
[  843.494565] ath9k: Unknown symbol ath9k_hw_settsf64 (err 0)
[  843.500337] ath9k: Unknown symbol ath9k_hw_init_global_settings (err 0)
[  843.507156] ath9k: Unknown symbol ath9k_hw_abortpcurecv (err 0)
[  843.513239] ath9k: Unknown symbol ath9k_hw_update_diag (err 0)
[  843.519285] ath9k: Unknown symbol ath9k_hw_name (err 0)
[  843.524665] ath9k: Unknown symbol ath9k_hw_beaconq_setup (err 0)
[  843.530862] ath9k: Unknown symbol ath9k_cmn_debug_phy_err (err 0)
[  843.537187] ath9k: Unknown symbol ath9k_hw_puttxbuf (err 0)
[  843.542959] ath9k: Unknown symbol ath9k_hw_write_associd (err 0)
[  843.549176] ath9k: Unknown symbol ath_dynack_sample_tx_ts (err 0)
[  843.555487] ath9k: Unknown symbol ath_dynack_reset (err 0)
[  843.561162] ath9k: Unknown symbol ath9k_cmn_debug_recv (err 0)
[  843.567198] ath9k: Unknown symbol ath9k_hw_setup_statusring (err 0)
[  843.573689] ath9k: Unknown symbol ath9k_hw_addrxbuf_edma (err 0)
[  843.579902] ath9k: Unknown symbol ath9k_cmn_debug_base_eeprom (err 0)
[  843.586513] ath9k: Unknown symbol ath9k_cmn_process_rssi (err 0)
[  843.592717] ath9k: Unknown symbol ath9k_cmn_beacon_config_adhoc (err 0)
[  843.599543] ath9k: Unknown symbol ath9k_hw_ani_monitor (err 0)
[  843.605533] ath9k: Unknown symbol ath9k_hw_getrxfilter (err 0)
[  843.611577] ath9k: Unknown symbol ath9k_cmn_debug_stat_rx (err 0)
[  843.617868] ath9k: Unknown symbol ath_dynack_node_init (err 0)
[  843.623865] ath9k: Unknown symbol ath9k_cmn_beacon_config_ap (err 0)
[  843.630416] ath9k: Unknown symbol ath9k_hw_set_tsfadjust (err 0)
[  843.636591] ath9k: Unknown symbol ar9003_hw_bb_watchdog_dbg_info (err 0)
[  843.643492] ath9k: Unknown symbol ar9003_paprd_create_curve (err 0)
[  843.649957] ath9k: Unknown symbol ath9k_hw_gpio_request_in (err 0)
[  843.656303] ath9k: Unknown symbol ath9k_hw_set_sta_beacon_timers (err 0)
[  843.663272] ath9k: Unknown symbol ath9k_hw_gettsf64 (err 0)
[  843.669035] ath9k: Unknown symbol ath9k_hw_rxprocdesc (err 0)
[  843.674939] ath9k: Unknown symbol ath_gen_timer_isr (err 0)
[  843.680700] ath9k: Unknown symbol ath9k_hw_resettxqueue (err 0)
[  843.686831] ath9k: Unknown symbol ath9k_hw_setopmode (err 0)
[  843.692654] ath9k: Unknown symbol ar9003_paprd_populate_single_table (err 0)
[  843.699911] ath9k: Unknown symbol ath9k_hw_process_rxdesc_edma (err 0)
[  843.706654] ath9k: Unknown symbol ath_dynack_node_deinit (err 0)
[  843.712881] ath9k: Unknown symbol ath9k_cmn_init_channels_rates (err 0)
[  843.719713] ath9k: Unknown symbol ath9k_hw_kill_interrupts (err 0)
[  843.726071] ath9k: Unknown symbol ath9k_cmn_reload_chainmask (err 0)
[  843.732658] ath9k: Unknown symbol ath9k_hw_reset_tsf (err 0)
[  843.738508] ath9k: Unknown symbol ath9k_hw_get_txq_props (err 0)
[  843.744679] ath9k: Unknown symbol ath9k_hw_releasetxqueue (err 0)
[  843.750966] ath9k: Unknown symbol ath9k_hw_setrxfilter (err 0)
[  843.757063] ath9k: Unknown symbol ath9k_hw_loadnf (err 0)
[  843.762627] ath9k: Unknown symbol ath9k_hw_gettxbuf (err 0)
[  843.768411] ath9k: Unknown symbol ath9k_hw_gpio_get (err 0)
[  843.774176] ath9k: Unknown symbol ath9k_hw_bstuck_nfcal (err 0)
[  843.780320] ath9k: Unknown symbol ath9k_hw_disable_interrupts (err 0)
[  843.786961] ath9k: Unknown symbol ath9k_cmn_update_txpow (err 0)
[  843.793132] ath9k: Unknown symbol ath9k_hw_computetxtime (err 0)
[  843.799339] ath9k: Unknown symbol ath9k_hw_getchan_noise (err 0)
[  843.805506] ath9k: Unknown symbol ar9003_paprd_enable (err 0)
[  843.811483] ath9k: Unknown symbol ath9k_hw_stopdmarecv (err 0)
[  843.817515] ath9k: Unknown symbol ath9k_cmn_get_hw_crypto_keytype (err 0)
[  843.824477] ath9k: Unknown symbol ath9k_hw_set_interrupts (err 0)
[  843.830764] ath9k: Unknown symbol ath9k_hw_wait (err 0)
[  843.836148] ath9k: Unknown symbol ar9003_paprd_setup_gain_table (err 0)
[  843.842963] ath9k: Unknown symbol ath9k_hw_numtxpending (err 0)
[  843.849079] ath9k: Unknown symbol ath9k_hw_get_tsf_offset (err 0)
[  843.855363] ath9k: Unknown symbol ath9k_cmn_process_rate (err 0)
[  843.861582] ath9k: Unknown symbol ath9k_cmn_init_crypto (err 0)
[  843.867699] ath9k: Unknown symbol ath9k_hw_set_gpio (err 0)
[  843.873444] ath9k: Unknown symbol ath9k_hw_setantenna (err 0)
[  843.879472] ath9k: Unknown symbol ath9k_hw_resume_interrupts (err 0)
[  843.885998] ath9k: Unknown symbol ath9k_hw_deinit (err 0)
[  843.891585] ath9k: Unknown symbol ath9k_cmn_get_channel (err 0)
[  843.897714] ath9k: Unknown symbol ath9k_hw_init (err 0)
[  843.903104] ath9k: Unknown symbol ath9k_hw_set_txq_props (err 0)
[  843.909307] ath9k: Unknown symbol ar9003_paprd_is_done (err 0)
[  864.457183] ath: phy4: Unable to initialize hardware; initialization status: -5
[  864.464617] ath9k ar934x_wmac: failed to initialize device
[  864.470266] ath9k: probe of ar934x_wmac failed with error -5
[  864.476180] pci 0000:00:00.0: using irq 40 for pin 1
[  864.484980] ath: phy5: Unable to initialize hardware; initialization status: -5
[  864.492449] ath9k 0000:00:00.0: Failed to initialize device
[  864.498181] ath9k: probe of 0000:00:00.0 failed with error -5
01.03.20202871KernelBug ReportVery LowCriticalBuffalo WHR-600D fails to initialise RT5592.TrunkUnconfirmed Task Description

This *might* be the same bug as  bug 691  (https://bugs.openwrt.org/index.php?do=details&task_id=691), or at least related.

Rooting around in the junk box I found a dismantled and bricked WHR-600D, not sure why or how it got into that state but I would have been tinkering with it in the Chaos Calmer era so possibly could not get it working at the time.

However I decided it would be a useful upgrade to a WHR-HP-G300N that I have covering a corner of the house - especially as that only has 4MB flash/32MB ram so is not really suitable for modern versions of OpenWRT

But... no dice

I successfully got half a serial console (I think the 600D’s rx pin is hosed) and got an initramfs image booted and flashed 19.07.1 - subsequent to that I compiled trunk from source but the behaviour is the same.

The RT5592 is not initialized - it is not “mis-detected” as a 2.4GHz only interface (although the unused MT7620A WiFi interface *is* detected as phy1).

Boot shows:

[ 8.984703] rt2800pci 0000:01:00.0: loaded eeprom from mtd device “factory” [ 8.998658] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
[ 9.014109] ieee80211 phy0: rt2800_init_eeprom: Error - Invalid RF chipset 0×0000 detected
[ 9.030585] ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to allocate device

then - for phy1

[ 9.050320] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device “factory” [ 9.064801] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
[ 9.080250] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected
[ 9.094676] ieee80211 phy1: Selected rate control algorithm ‘minstrel_ht’

iw list only gives phy1 although I think that is unused/unconnected on this router (AFAICS the two antenna connect only into the RT5592) - I can’t try the images that Mathias Kresin posted in the previous bug report as the links are now dead but I see that the two commits that were made to the WHR-600D and RP-N53 dts files don’t seem to have been accidentally reverted.

Also tried 18.06.7 but that just crashes with:
[ 10.951562] rt2800pci 0000:01:00.0: loaded eeprom from mtd device “factory” [ 10.965533] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
[ 10.980983] ieee80211 phy0: rt2800_init_eeprom: Error - Invalid RF chipset 0×0000 detected
[ 10.997460] ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 11.012574] ————[ cut here ]———— [ 11.021787] WARNING: CPU: 0 PID: 426 at mm/vmalloc.c:1466 0x801b2480()
[ 11.034795] Trying to vfree() nonexistent vm area (8317e000)

Not sure where to take this but happy to supply extra info or try patches if anyone has any ideas.

 


12.04.20202996KernelBug ReportVery LowCriticalnanopi air cannot start in kernel 5.4.31TrunkUnconfirmed Task Description

device: nanopi air
steps:

1. "git check" to get the last trunk
2. "make menuconfig" select the device "nanopi air"
3. then "make" to get the rom and dd it into TF card
4. power on and you will see stop at "Starting kernel ..."

here is my system log:

U-Boot SPL 2020.01 (Apr 09 2020 - 20:09:21 +0000)
DRAM: 512 MiB
Trying to boot from MMC1


U-Boot 2020.01 (Apr 09 2020 - 20:09:21 +0000) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: FriendlyARM NanoPi NEO
DRAM:  512 MiB
MMC:   mmc@1c0f000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   phy interface0

Error: ethernet@1c30000 address not set.
No ethernet found.

starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
Bus usb@1c1d000: USB EHCI 1.00
Bus usb@1c1d400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
scanning bus usb@1c1d000 for devices... 1 USB Device(s) found
scanning bus usb@1c1d400 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
377 bytes read in 2 ms (183.6 KiB/s)
## Executing script at 43100000
3078032 bytes read in 142 ms (20.7 MiB/s)
19497 bytes read in 3 ms (6.2 MiB/s)
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   ARM OpenWrt Linux-5.4.31
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3077968 Bytes = 2.9 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
EHCI failed to shut down host controller.
   Loading Kernel Image
   Using Device Tree in place at 43000000, end 43007c28

Starting kernel ...
15.05.20203099KernelBug ReportVery LowCriticalTP-Link C2600 Kernel 5.4 crashes while accessing invali...TrunkUnconfirmed Task Description

Linux kernel experiences an oops from time to time
- Device: TP-Link Archer C2600
- Kernel Version: 5.4.40
- OpenWRT Version: OpenWrt SNAPSHOT, r13224+16-2308644b0c
- Steps to reproduce: Simply wait. After an unknown amount of time the kernels crashes leading to a reboot.

 


30.06.20203211KernelBug ReportVery LowCriticalwrt1200ac issue with mvneta driver in 5.4 kernel - inte...TrunkUnconfirmed Task Description

wrt1200ac works OK with 4.19.108 kernel. eth1 is the upstream port, eth0 is the 4 local gigabit ports. dmesg reports:

[ 1.098981] 0×000000280000-0×000000900000 : “unused_area” [ 1.105081] libphy: Fixed MDIO Bus: probed
[ 1.109546] libphy: orion_mdio_bus: probed
[ 1.113853] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.122882] mvneta f1070000.ethernet eth0: Using hardware mac address c0:56:27:70:5b:65
[ 1.132447] mvneta f1034000.ethernet eth1: Using random mac address 9e:2e:40:0f:3a:63
[ 1.140510] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.147081] ehci-pci: EHCI PCI platform driver
[ 1.151575] ehci-platform: EHCI generic platform driver
[ 1.156913] ehci-orion: EHCI orion driver
[ 1.161040] orion-ehci f1058000.usb: EHCI Host Controller

Under the 5.4.48 kernel, eth1 doesn’t show up, so no upstream connectivity.

[ 1.208713] orion-mdio f1072004.mdio: IRQ index 0 not found
[ 1.214360] libphy: orion_mdio_bus: probed
[ 1.218622] mv88e6085 f1072004.mdio-mii:00: switch 0×1760 detected: Marvell 88E6176, revision 1
[ 1.389672] libphy: mv88e6xxx SMI: probed
[ 1.395805] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.404784] mvneta f1070000.ethernet eth0: Using hardware mac address c0:56:27:70:5b:65
[ 1.412919] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.419511] ehci-pci: EHCI PCI platform driver
[ 1.424011] ehci-platform: EHCI generic platform driver
[ 1.429356] ehci-orion: EHCI orion driver
[ 1.433476] orion-ehci f1058000.usb: EHCI Host Controller


09.05.20192276OtherBug ReportVery LowCriticalThe path to read temperature in fan_ctrl.sh needs to be...TrunkUnconfirmed Task Description

[openwrt/openwrt.git] / target / linux / mvebu / base-files / sbin / fan_ctrl.sh

CPU_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon2/temp1_input`
DDR_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon1/temp1_input`
WIFI_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon1/temp2_input`

These three paths are wrong, I found these three:
CPU_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon1/temp1_input`
DDR_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon0/temp1_input`
WIFI_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon0/temp2_input`

11.05.20181543PackagesBuild FailureVery LowCriticalMany packages in snapshot failing on one build, ok on n...TrunkUnconfirmed Task Description

Snapshot/Packages
Occurs on all architectures apparently at random with faillogs.
After next build some that failed will be ok and some that previously built will fail.
eg submit a PR on https://github.com/openwrt/packages Travis shows fail on dependencies. After next automated build, Travis errors will be different, or if lucky will pass, only to fail again after the next build.
It seems the build system is chasing its tail somehow.

23.12.20182023PackagesBug ReportVery LowCriticalPPtP not connecting on Xiaomi Mi WiFi R3Gopenwrt-18.06Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on : Xiaomi Mi WiFi R3G (https://openwrt.org/toh/xiaomi/mir3g)
- OpenWrt 18.06.1

Steps to reproduce:

1.opkg update
2.opkg install ppp-mod-pptp
3.opkg install kmod-nf-nathelper-extra
4.opkg install kmod-ipt-raw
5.disabled rebind attack protection from DNS and DHCP
6.added below custom rule on /etc/firewall.user

iptables -t raw -A OUTPUT -p tcp -m tcp --dport 1723 -j CT --helper pptp

7.setup the PPTP in the LUCI
8.reboot

Relevant Logs appearing repetitively:

Sun Dec 23 17:48:01 2018 daemon.notice pppd[22738]: pppd 2.4.7 started by root, uid 0
Sun Dec 23 17:48:02 2018 kern.info kernel: [ 1551.622787] pptp-ISP: renamed from ppp0
Sun Dec 23 17:48:02 2018 daemon.info pppd[22738]: Using interface pptp-ISP Sun Dec 23 17:48:02 2018 daemon.notice pppd[22738]: Connect: pptp-ISP ←→ pptp (red.connect.net.pk)
Sun Dec 23 17:48:03 2018 daemon.notice pppd[22738]: CHAP authentication succeeded
Sun Dec 23 17:48:03 2018 daemon.notice pppd[22738]: Connection terminated.
Sun Dec 23 17:48:03 2018 daemon.warn pppd[22740]: read returned zero, peer has closed
Sun Dec 23 17:48:03 2018 daemon.warn pppd[22740]: read returned zero, peer has closed
Sun Dec 23 17:48:03 2018 daemon.info pppd[22738]: Exit.
Sun Dec 23 17:48:03 2018 daemon.notice netifd: Interface ‘ISP’ is now down
Sun Dec 23 17:48:03 2018 daemon.notice netifd: Interface ‘ISP’ is setting up now
Sun Dec 23 17:48:03 2018 daemon.info pppd[22998]: Plugin pptp.so loaded.
Sun Dec 23 17:48:03 2018 daemon.info pppd[22998]: PPTP plugin version 1.00
Sun Dec 23 17:48:03 2018 daemon.notice pppd[22998]: pppd 2.4.7 started by root, uid 0


21.01.20192070PackagesBug ReportVery LowCriticalbn_wexpand in bn_div.c are not checked for failure and ...openwrt-18.06Unconfirmed Task Description

Hi,
The code in the openwrt/package/network/services/ead/src/tinysrp/bn_div.c should be fixed to check the bn_wexpand return value. The problem exists in multiple other projects including openssl with CVE (CVE-2009-3245)(https://github.com/openssl/openssl/commit/2d9dcd4ff0923347fab727ac90e8526dd65e4e07).

21.01.20192072PackagesBug ReportVery LowCriticalbn_wexpand return value vulnerable to memory leakopenwrt-18.06Unconfirmed Task Description

Hi,
The code in the openwrt/package/network/services/ead/src/tinysrp/bn_div.c should be fixed to check the bn_wexpand return value. The problem exists in multiple other projects including openssl with CVE (CVE-2009-3245)(https://github.com/openssl/openssl/commit/2d9dcd4ff0923347fab727ac90e8526dd65e4e07).

23.01.20192080PackagesBug ReportVery LowCriticalWan IPV6 interface with 6rd protocol reports bad mac ad...openwrt-18.06Unconfirmed Task Description

Device used is BT Home Hub 5 v1.2.
Openwrt release is 18.06.1,
6rd package version is 9-4
ISP is Free (France)

“Wan” interface, IPV4, with Dchp client protocol is up and works fine on physical interface dsl0.836.
Mac address has to be overriden because ISP uses a fixed mac address, different for each Freebox, it’s own dsl modem/box.

“Wan6”, IPV6, interface with 6rd protocol is up but the mac reported in the not the same as those reported in “Wan” interface.

As you could see on the attached capture of the “Interfaces overview”, the mac address reported is the “Wan” IpV4 address !!!

Wan6 interface is up but frames are rejected by ISP because the mac address is not those one expected as for “Wan” interface. Mac address can’t be overriden on these interface.

network config is attached.



Cromagnon31

28.02.20202868PackagesBug ReportVery LowCriticalCLAT/464XLAT stopped working in 19.07.1openwrt-19.07Unconfirmed Task Description

I was using CLAT in an Archer C7 v5 for some testing. Everything worked fine.

I decided then to upgrade to 19.07.1 and everything works fine from the backup that I did from the config, but not the CLAT (464XLAT).

I decided to reflash the unit from scratch and configure everything manually. Same problem, CLAT is not working. I tried even setting the tunnel link to the WAN interface manually in the CLAT interface (advanced settings), instead of the default “unspecified”, played with the firewall settings as well, etc. Nothing resulted.

By the way, even in 18.06.7, which I’m using right now with the CLAT, the CLAT interface doesn’t report any RX/TX or packets. In the same router I’ve installed Collectd and I can see there the traffic being graphed correctly.

So I’m guessing there is some bug there. I’m going to report it as a bug, but just in case someone discovered an easy solution.

I’ve observed that at some point, across numerous tests, a Virtual dynamic interface 464XLAT was created, but it doesn’t allow to edit it, so not sure if this is related. I believe this interface is only created when I’m using PPPoE for the WAN link (I’ve tested 2 scenarios, PPPoE done in the OpenWRT box and PPPoE done in the GPON ONT).

06.05.20203067PackagesBug ReportVery LowCriticaldownload board.bin failureopenwrt-19.07Unconfirmed Task Description

make[3]: Entering directory ‘/home/leo/openwrt/package/firmware/ath10k-ct-firmware’ mkdir -p /home/leo/openwrt/dl
SHELL= flock /home/leo/openwrt/tmp/.ath10k-firmware-d622d160e9f552ead68d9ae81b715422892dc2ef-qca9887-board.bin.flock -c ' /home/leo/openwrt/scripts/download.pl “/home/leo/openwrt/dl” “ath10k-firmware-d622d160e9f552ead68d9ae81b715422892dc2ef-qca9887-board.bin” “cf4df099f6ee05c181f55ce17297a1d32c61d725eb96246fd315ad5587c42426” “board.bin” “@GITHUB/kvalo/ath10k-firmware/d622d160e9f552ead68d9ae81b715422892dc2ef/QCA9887/hw1.0” '
+ curl -f –connect-timeout 20 –retry 5 –location –insecure https://sources.cdn.openwrt.org/board.bin

% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                               Dload  Upload   Total   Spent    Left  Speed
0     0    0     0    0     0      0      0 --:--:--  0:00:02 --:--:--     0

curl: (22) The requested URL returned error: 404
Download failed.
+ curl -f –connect-timeout 20 –retry 5 –location –insecure https://raw.githubusercontent.com/kvalo/ath10k-firmware/d622d160e9f552ead68d9ae81b715422892dc2ef/QCA9887/hw1.0/board.bin

% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                               Dload  Upload   Total   Spent    Left  Speed
0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (7) Failed to connect to raw.githubusercontent.com port 443: Connection refused

Download failed.
+ curl -f –connect-timeout 20 –retry 5 –location –insecure https://raw.githubusercontent.com/kvalo/ath10k-firmware/d622d160e9f552ead68d9ae81b715422892dc2ef/QCA9887/hw1.0/board.bin

% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                               Dload  Upload   Total   Spent    Left  Speed
0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (7) Failed to connect to raw.githubusercontent.com port 443: Connection refused

Download failed.
+ curl -f –connect-timeout 20 –retry 5 –location –insecure https://raw.githubusercontent.com/kvalo/ath10k-firmware/d622d160e9f552ead68d9ae81b715422892dc2ef/QCA9887/hw1.0/board.bin

% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                               Dload  Upload   Total   Spent    Left  Speed
0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (7) Failed to connect to raw.githubusercontent.com port 443: Connection refused

Download failed.
+ curl -f –connect-timeout 20 –retry 5 –location –insecure https://raw.githubusercontent.com/kvalo/ath10k-firmware/d622d160e9f552ead68d9ae81b715422892dc2ef/QCA9887/hw1.0/board.bin

% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                               Dload  Upload   Total   Spent    Left  Speed
0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (7) Failed to connect to raw.githubusercontent.com port 443: Connection refused

Download failed.
+ curl -f –connect-timeout 20 –retry 5 –location –insecure https://raw.githubusercontent.com/kvalo/ath10k-firmware/d622d160e9f552ead68d9ae81b715422892dc2ef/QCA9887/hw1.0/board.bin

% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                               Dload  Upload   Total   Spent    Left  Speed
0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (7) Failed to connect to raw.githubusercontent.com port 443: Connection refused

Download failed.
+ curl -f –connect-timeout 20 –retry 5 –location –insecure https://sources.openwrt.org/board.bin

% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                               Dload  Upload   Total   Spent    Left  Speed
0     0    0     0    0     0      0      0 --:--:--  0:00:01 --:--:--     0

curl: (22) The requested URL returned error: 404 Not Found
Download failed.
+ curl -f –connect-timeout 20 –retry 5 –location –insecure https://mirror2.openwrt.org/sources/board.bin

% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                               Dload  Upload   Total   Spent    Left  Speed
0     0    0     0    0     0      0      0 --:--:--  0:00:01 --:--:--     0

curl: (22) The requested URL returned error: 404 Not Found
Download failed.

14.10.2016227Base systemBug ReportMediumHighVLAN support mismatch between preinit and default netwo...TrunkResearching Task Description

PPPoE is broken on WRT1900ACS

Upgraded from Lede r578 to latest Lede r1814 and PPPOE doesn’t work anymore altough the pppd version and PPPoE version are the same:
- Linksys WRT1900ACS
- LEDE reboot r1814

pppd debug log:

Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Timeout waiting for PADO packets
Unable to complete PPPoE Discovery
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]

While on the same hardware running LEDE r578, the PPPoE module works as expected:

Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Recv PPPOE Discovery V1T1 PADO session 0×0 length 40
dst c2:56:27:ca:d7:d4 src a0:f3:e4:34:d8:21
[service-name] [AC-name acc-aln1.hac] [AC-cookie 75 58 37 a5 ba 3c e4 a5 2a 61 bb 23 92 5c 1b dc]
Send PPPOE Discovery V1T1 PADR session 0×0 length 24
dst a0:f3:e4:34:d8:21 src c2:56:27:ca:d7:d4
[service-name] [AC-cookie 75 58 37 a5 ba 3c e4 a5 2a 61 bb 23 92 5c 1b dc]
Recv PPPOE Discovery V1T1 PADS session 0x30b length 4
dst c2:56:27:ca:d7:d4 src a0:f3:e4:34:d8:21
[service-name]
PADS: Service-Name: ‘’ PPP session is 779
Connected to a0:f3:e4:34:d8:21 via interface eth0
using channel 2
Using interface pppoe-wan
Connect: pppoe-wan ←→ eth0
sent [LCP ConfReq id=0×1 <mru 1492> <magic 0xc6952556>]
rcvd [LCP ConfReq id=0×66 <mru 1492> <auth chap MD5> <magic 0x4cc73648>]
sent [LCP ConfAck id=0×66 <mru 1492> <auth chap MD5> <magic 0x4cc73648>]
rcvd [LCP ConfAck id=0×1 <mru 1492> <magic 0xc6952556>]
sent [LCP EchoReq id=0×0 magic=0xc6952556]
rcvd [CHAP Challenge id=0×1 <7131a44524d1de8f1cd1061cac6d8c071d8bfe7351bc4ea7bd08f56684428475f229ba177a192696ebab32>, name = “acc-aln1.hac”]
sent [CHAP Response id=0×1 <4bb1a418b298790b128ad4d7ef3109ad>, name = “bthomehub@btbroadband.com”]
rcvd [LCP EchoRep id=0×0 magic=0x4cc73648]
rcvd [CHAP Success id=0×1 “CHAP authentication success”]
CHAP authentication succeeded: CHAP authentication success
CHAP authentication succeeded
peer from calling number A0:F3:E4:34:D8:21 authorized
sent [IPCP ConfReq id=0×1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
sent [IPV6CP ConfReq id=0×1 <addr fe80::c595:37d1:3987:1929>]
rcvd [IPV6CP ConfReq id=0x7b <addr fe80::0221:05ff:feb4:8824>]
sent [IPV6CP ConfAck id=0x7b <addr fe80::0221:05ff:feb4:8824>]
rcvd [IPCP ConfReq id=0×38 <addr 172.16.12.12>]
sent [IPCP ConfAck id=0×38 <addr 172.16.12.12>]
rcvd [IPCP ConfNak id=0×1 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
sent [IPCP ConfReq id=0×2 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
rcvd [IPV6CP ConfAck id=0×1 <addr fe80::c595:37d1:3987:1929>]
local LL address fe80::c595:37d1:3987:1929
remote LL address fe80::0221:05ff:feb4:8824
Script /lib/netifd/ppp-up started (pid 2646)
rcvd [IPCP ConfAck id=0×2 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
local IP address 81.146.2.155
remote IP address 172.16.12.12
primary DNS address 81.139.57.100
secondary DNS address 81.139.56.100
ppp.log
secondary DNS address 81.139.56.100
Script /lib/netifd/ppp-up started (pid 2653)
Script /lib/netifd/ppp-up finished (pid 2646), status = 0×9 Script /lib/netifd/ppp-up finished (pid 2653), status = 0×9

27.10.2016253Base systemBug ReportVery LowHighMulticast over wireless ceases to work properly after a...AllNew Task Description

I am having a problem on a UBNT UAP-LR where, if many clients stay connected the router for a long time, multicast packets will stop being reliably sent to the wireless clients. I can reproduce this with LEDE r1953, but it goes back at least as far as OpenWRT 15.05.1 with kernel 3.18. I can not, however, reproduce it on another network with the same WAP but with only one or two wireless clients.

This originally manifested as IPv6 ceasing to work since the (multicasted) RA packets were not reaching the wireless clients. I used tcpdump on the WAP and determined that the RAs were arriving through the wired interface and leaving through the wireless interface as they should, but tcpdump on the client indicates that a vast majority of the RAs are never received. (Please note that the IPv6 issue is not reproducible with the router running OpenWRT/LEDE and odhcpd, since odhcpd unicasts RAs sent as a response to an RS instead of multicasting them, while it is reproducible when the router is running radvd, for example as pfSense does.)

21.11.2016296Base systemBug ReportVery LowHighUbiquiti Bullet M 10/100 ethernet interface comes up as...TrunkUnconfirmed Task Description

For the last month or so, and persisting in r2248, when a Ubiquiti Bullet M is booted through typical Ubiquiti 10/100 passive PoE injector, the interface appears to come up in gigabit mode (see timestamp 18.990274 below), despite being only a 10/100 Mbps interface. Restarting /etc/init.d/network fixes it. I am running batman-adv over the ethernet interface, which may be involved. I will check if it happens when batman-adv is not used on the interface and report in a followup comment.

The dmesg look like this:

[    0.000000] Linux version 4.4.32 (openwrt@hawg) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1439) ) #0 Mon Nov 21 07:14:51 2016
[    0.000000] MyLoader: sysp=00030800, boardp=088201a0, parts=fdeffeff
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7240 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80412320, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=UBNT-BM mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 27616K/32768K available (2990K kernel code, 174K rwdata, 756K rodata, 296K init, 198K bss, 5152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
[    0.000013] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
[    0.007858] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
[    0.080537] pid_max: default: 32768 minimum: 301
[    0.085319] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091915] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102739] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113516] NET: Registered protocol family 16
[    0.120053] MIPS: machine is Ubiquiti Bullet M
[    0.126714] registering PCI controller with io_map_base unset
[    0.357171] PCI host bridge to bus 0000:00
[    0.361273] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.368174] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.373719] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.380486] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.388422] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[    0.388466] pci 0000:00:00.0: fixup device configuration
[    0.395018] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    0.395154] pci 0000:00:00.0: supports D1
[    0.395179] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.395521] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.395573] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    0.402864] pci 0000:00:00.0: using irq 40 for pin 1
[    0.408959] clocksource: Switched to clocksource MIPS
[    0.415845] NET: Registered protocol family 2
[    0.421435] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.428393] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.434796] TCP: Hash tables configured (established 1024 bind 1024)
[    0.441291] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.447126] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.453786] NET: Registered protocol family 1
[    0.458221] PCI: CLS 0 bytes, default 32
[    0.464223] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.470512] Crashlog allocated RAM at address 0x1f00000
[    0.495166] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.501050] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.514332] io scheduler noop registered
[    0.518252] io scheduler deadline registered (default)
[    0.523724] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.530709] console [ttyS0] disabled
[    0.554342] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12187500) is a 16550A
[    0.563020] console [ttyS0] enabled
[    0.570030] bootconsole [early0] disabled
[    0.582486] m25p80 spi0.0: found mx25l6405d, expected m25p80
[    0.588201] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.593207] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.599160] Creating 5 MTD partitions on "spi0.0":
[    0.603978] 0x000000000000-0x000000040000 : "u-boot"
[    0.611975] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.619659] 0x000000050000-0x0000007b0000 : "firmware"
[    0.638850] 2 uimage-fw partitions found on MTD device firmware
[    0.644866] 0x000000050000-0x0000001a0000 : "kernel"
[    0.651748] 0x0000001a0000-0x0000007b0000 : "rootfs"
[    0.658927] mtd: device 4 (rootfs) set to be root filesystem
[    0.664753] 1 squashfs-split partitions found on MTD device rootfs
[    0.671002] 0x000000550000-0x0000007b0000 : "rootfs_data"
[    0.678725] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.685799] 0x0000007f0000-0x000000800000 : "EEPROM"
[    0.713743] libphy: ag71xx_mdio: probed
[    1.302694] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
[    1.312905] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.322158] NET: Registered protocol family 10
[    1.332118] NET: Registered protocol family 17
[    1.336691] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.349583] 8021q: 802.1Q VLAN Support v1.8
[    1.362372] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.372025] Freeing unused kernel memory: 296K (80436000 - 80480000)
[    2.887723] init: Console is alive
[    2.891524] init: - watchdog -
[    4.278153] usbcore: registered new interface driver usbfs
[    4.283867] usbcore: registered new interface driver hub
[    4.289377] usbcore: registered new device driver usb
[    4.301662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.310384] ehci-platform: EHCI generic platform driver
[    4.319460] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.327414] ohci-platform: OHCI generic platform driver
[    4.336259] init: - preinit -
[    5.148878] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.181862] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    7.440590] eth0: link up (100Mbps/Full duplex)
[    7.445184] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.484066] jffs2: notice: (361) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.501955] mount_root: switching to jffs2 overlay
[    8.517794] urandom-seed: Seeding with /etc/urandom.seed
[    8.794632] eth0: link down
[    8.814035] procd: - early -
[    8.817063] procd: - watchdog -
[    9.492101] procd: - ubus -
[    9.545805] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.555498] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.564637] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.574254] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.583375] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.593373] random: ubusd: uninitialized urandom read (4 bytes read, 16 bits of entropy available)
[    9.602738] random: ubusd: uninitialized urandom read (4 bytes read, 16 bits of entropy available)
[    9.612394] procd: - init -
[   10.066368] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[   10.074041] Backport generated by backports.git backports-20160324-9-g0e38f5c
[   10.125220] batman_adv: B.A.T.M.A.N. advanced 2016.4 (compatibility version 15) loaded
[   10.213939] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   10.224958] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[   10.233630] ath: EEPROM regdomain: 0x0
[   10.233647] ath: EEPROM indicates default country code should be used
[   10.233661] ath: doing EEPROM country->regdmn map search
[   10.233689] ath: country maps to regdmn code: 0x3a
[   10.233705] ath: Country alpha2 being used: US
[   10.233718] ath: Regpair used: 0x3a
[   10.248634] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.257391] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   11.870351] random: jshn: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   12.001559] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   18.855427] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.875510] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[   18.990274] eth0: link up (1000Mbps/Full duplex)
[   18.994964] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.330349] batman_adv: bat0: Adding interface: eth0
[   19.335365] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[   19.359419] batman_adv: bat0: Interface activated: eth0
[   19.367077] 8021q: adding VLAN 0 to HW filter on device bat0
[   19.406417] device bat0 entered promiscuous mode
[   19.411309] br-pub: port 1(bat0) entered forwarding state
[   19.416772] br-pub: port 1(bat0) entered forwarding state
[   19.422579] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[   19.870508] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[   20.359133] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[   20.367269] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[   21.412169] br-pub: port 1(bat0) entered forwarding state
[   21.549966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.563679] device wlan0 entered promiscuous mode
[   21.591315] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.597879] br-pub: port 2(wlan0) entered forwarding state
[   21.603541] br-pub: port 2(wlan0) entered forwarding state
[   21.784924] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[   21.912131] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[   22.268273] batman_adv: bat0: Adding interface: mesh0
[   22.273432] batman_adv: bat0: Interface activated: mesh0
[   23.599046] br-pub: port 2(wlan0) entered forwarding state
[   29.369162] batman_adv: bat0: IGMP Querier appeared
[   29.374093] batman_adv: bat0: MLD Querier appeared
[   34.068975] ------------[ cut here ]------------
[   34.073700] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:306 dev_watchdog+0x1dc/0x260()
[   34.082197] NETDEV WATCHDOG: eth0 (ag71xx): transmit queue 0 timed out
[   34.088754] Modules linked in: ath9k ath9k_common mac80211 ath9k_hw ath batman_adv libcrc32c cfg80211 compat ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16
 cryptomgr aead crypto_null crc32c_generic crypto_hash
[   34.112252] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.32 #0
[   34.118013] Stack : 803c8fc4 00000000 00000001 80420000 80413038 80412cc3 803aa67c 00000000
[   34.118013] 	  8048379c 8041135c 00000200 00100000 0000000a 800a71a8 803afce8 80410000
[   34.118013] 	  00000003 8041135c 803ae0f4 8040dc2c 0000000a 800a5124 00000006 00000000
[   34.118013] 	  00000000 801f3100 00000000 00000000 00000000 00000000 00000000 00000000
[   34.118013] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   34.118013] 	  ...
[   34.153969] Call Trace:
[   34.156440] [<80071af0>] show_stack+0x50/0x84
[   34.160843] [<80081870>] warn_slowpath_common+0xa0/0xd0
[   34.166096] [<800818cc>] warn_slowpath_fmt+0x2c/0x38
[   34.171111] [<80290970>] dev_watchdog+0x1dc/0x260
[   34.175854] [<800b0460>] call_timer_fn.isra.5+0x24/0x80
[   34.181125] [<800b06e4>] run_timer_softirq+0x1b4/0x1fc
[   34.186296] [<80083dec>] __do_softirq+0x250/0x298
[   34.191059] [<8006a5d0>] plat_irq_dispatch+0xd4/0x10c
[   34.196134] [<80060830>] ret_from_irq+0x0/0x4
[   34.200526] [<80060a80>] __r4k_wait+0x20/0x40
[   34.204906] [<800a2304>] cpu_startup_entry+0x9c/0xe8
[   34.209934] [<80436bd4>] start_kernel+0x470/0x490
[   34.214656] 
[   34.216159] ---[ end trace ef06a4b3ec78272a ]---
[   34.220810] eth0: tx timeout
[   37.565193] random: nonblocking pool is initialized
[   44.068999] eth0: tx timeout
[   54.069064] eth0: tx timeout
[   64.068993] eth0: tx timeout
[   74.069871] eth0: tx timeout
[   82.660973] batman_adv: bat0: MLD Querier disappeared - multicast optimizations disabled
[   84.070901] eth0: tx timeout
[   92.701961] batman_adv: bat0: MLD Querier appeared
[   94.071717] eth0: tx timeout
[  104.072355] eth0: tx timeout
[  114.072669] eth0: tx timeout
[...]

When I do an /etc/init.d/network restart, the interface recovers to normal function, and I get this in dmesg:

[ 1296.763793] br-pub: port 2(wlan0) entered disabled state
[ 1296.769232] br-pub: port 1(bat0) entered disabled state
[ 1296.808305] device bat0 left promiscuous mode
[ 1296.812986] br-pub: port 1(bat0) entered disabled state
[ 1296.862085] IPv6: ADDRCONF(NETDEV_UP): bat0: link is not ready
[ 1296.879239] device wlan0 left promiscuous mode
[ 1296.883945] br-pub: port 2(wlan0) entered disabled state
[ 1296.904196] batman_adv: bat0: Interface deactivated: mesh0
[ 1296.909752] batman_adv: bat0: Removing interface: mesh0
[ 1296.963462] batman_adv: bat0: Interface deactivated: eth0
[ 1296.993492] eth0: link down
[ 1296.998705] batman_adv: bat0: Removing interface: eth0
[ 1301.629484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1301.649941] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[ 1301.985100] eth0: link up (100Mbps/Full duplex)
[ 1301.989698] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1302.191373] batman_adv: bat0: Adding interface: eth0
[ 1302.196453] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[ 1302.220488] batman_adv: bat0: Interface activated: eth0
[ 1302.228092] 8021q: adding VLAN 0 to HW filter on device bat0
[ 1302.275944] device bat0 entered promiscuous mode
[ 1302.280747] br-pub: port 1(bat0) entered forwarding state
[ 1302.286292] br-pub: port 1(bat0) entered forwarding state
[ 1302.292106] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[ 1302.590333] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[ 1303.213417] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[ 1303.221556] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[ 1304.283452] br-pub: port 1(bat0) entered forwarding state
[ 1304.672382] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1304.782643] device wlan0 entered promiscuous mode
[ 1304.827845] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1304.834479] br-pub: port 2(wlan0) entered forwarding state
[ 1304.840053] br-pub: port 2(wlan0) entered forwarding state
[ 1305.112607] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[ 1305.190600] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[ 1305.692918] batman_adv: bat0: Adding interface: mesh0
[ 1305.698080] batman_adv: bat0: Interface activated: mesh0
[ 1306.833410] br-pub: port 2(wlan0) entered forwarding state
[ 1312.303688] batman_adv: bat0: IGMP Querier appeared
[ 1312.308629] batman_adv: bat0: MLD Querier appeared

If I disconnect the other end of the ethernet cable so that there is no link peer, I do not see the problem (see below):

[    0.000000] Linux version 4.4.32 (openwrt@hawg) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1439) ) #0 Mon Nov 21 07:14:51 2016
[    0.000000] MyLoader: sysp=00000000, boardp=00000000, parts=ffffffff
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7240 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80412320, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=UBNT-BM mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 27616K/32768K available (2990K kernel code, 174K rwdata, 756K rodata, 296K init, 198K bss, 5152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
[    0.000013] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
[    0.007859] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
[    0.080537] pid_max: default: 32768 minimum: 301
[    0.085319] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091915] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113517] NET: Registered protocol family 16
[    0.120061] MIPS: machine is Ubiquiti Bullet M
[    0.126721] registering PCI controller with io_map_base unset
[    0.357179] PCI host bridge to bus 0000:00
[    0.361281] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.368182] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.373728] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.380495] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.388431] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[    0.388474] pci 0000:00:00.0: fixup device configuration
[    0.395026] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    0.395163] pci 0000:00:00.0: supports D1
[    0.395187] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.395530] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.395581] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    0.402872] pci 0000:00:00.0: using irq 40 for pin 1
[    0.408968] clocksource: Switched to clocksource MIPS
[    0.415854] NET: Registered protocol family 2
[    0.421444] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.428402] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.434805] TCP: Hash tables configured (established 1024 bind 1024)
[    0.441299] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.447134] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.453795] NET: Registered protocol family 1
[    0.458229] PCI: CLS 0 bytes, default 32
[    0.464231] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.470521] Crashlog allocated RAM at address 0x1f00000
[    0.495175] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.501058] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.514341] io scheduler noop registered
[    0.518261] io scheduler deadline registered (default)
[    0.523733] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.530718] console [ttyS0] disabled
[    0.554351] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12187500) is a 16550A
[    0.563030] console [ttyS0] enabled
[    0.570040] bootconsole [early0] disabled
[    0.582496] m25p80 spi0.0: found mx25l6405d, expected m25p80
[    0.588212] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.593216] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.599171] Creating 5 MTD partitions on "spi0.0":
[    0.603989] 0x000000000000-0x000000040000 : "u-boot"
[    0.611984] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.619662] 0x000000050000-0x0000007b0000 : "firmware"
[    0.638852] 2 uimage-fw partitions found on MTD device firmware
[    0.644868] 0x000000050000-0x0000001a0000 : "kernel"
[    0.651750] 0x0000001a0000-0x0000007b0000 : "rootfs"
[    0.658926] mtd: device 4 (rootfs) set to be root filesystem
[    0.664753] 1 squashfs-split partitions found on MTD device rootfs
[    0.671004] 0x000000550000-0x0000007b0000 : "rootfs_data"
[    0.678725] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.685800] 0x0000007f0000-0x000000800000 : "EEPROM"
[    0.713752] libphy: ag71xx_mdio: probed
[    1.302703] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
[    1.312917] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.322177] NET: Registered protocol family 10
[    1.332146] NET: Registered protocol family 17
[    1.336720] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.349611] 8021q: 802.1Q VLAN Support v1.8
[    1.362390] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.372040] Freeing unused kernel memory: 296K (80436000 - 80480000)
[    2.887726] init: Console is alive
[    2.891520] init: - watchdog -
[    4.278086] usbcore: registered new interface driver usbfs
[    4.283799] usbcore: registered new interface driver hub
[    4.289318] usbcore: registered new device driver usb
[    4.301475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.310215] ehci-platform: EHCI generic platform driver
[    4.319363] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.327317] ohci-platform: OHCI generic platform driver
[    4.336163] init: - preinit -
[    5.148612] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.181619] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    8.484735] jffs2: notice: (361) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.502585] mount_root: switching to jffs2 overlay
[    8.518273] urandom-seed: Seeding with /etc/urandom.seed
[    8.810840] procd: - early -
[    8.813863] procd: - watchdog -
[    9.487850] procd: - ubus -
[    9.541721] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.551409] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.560553] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.570163] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.579297] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.589333] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.598611] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.608223] procd: - init -
[   10.064115] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[   10.071796] Backport generated by backports.git backports-20160324-9-g0e38f5c
[   10.122372] batman_adv: B.A.T.M.A.N. advanced 2016.4 (compatibility version 15) loaded
[   10.205329] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   10.216362] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[   10.225034] ath: EEPROM regdomain: 0x0
[   10.225051] ath: EEPROM indicates default country code should be used
[   10.225065] ath: doing EEPROM country->regdmn map search
[   10.225093] ath: country maps to regdmn code: 0x3a
[   10.225109] ath: Country alpha2 being used: US
[   10.225122] ath: Regpair used: 0x3a
[   10.240049] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.248689] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   11.861887] random: jshn: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   11.993063] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   18.833441] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.855566] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[   21.215610] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.255512] device wlan0 entered promiscuous mode
[   21.286637] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.293301] br-pub: port 1(wlan0) entered forwarding state
[   21.298864] br-pub: port 1(wlan0) entered forwarding state
[   21.335689] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[   21.541225] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[   21.594616] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[   22.284927] batman_adv: bat0: Adding interface: mesh0
[   22.290148] batman_adv: bat0: Interface activated: mesh0
[   22.297750] 8021q: adding VLAN 0 to HW filter on device bat0
[   22.362868] device bat0 entered promiscuous mode
[   22.367627] br-pub: port 2(bat0) entered forwarding state
[   22.373200] br-pub: port 2(bat0) entered forwarding state
[   22.718089] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[   23.289035] br-pub: port 1(wlan0) entered forwarding state
[   23.309325] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[   23.317459] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[   24.369054] br-pub: port 2(bat0) entered forwarding state
[   29.389161] batman_adv: bat0: IGMP Querier appeared
[   38.069058] random: nonblocking pool is initialized
[   44.920666] eth0: link up (100Mbps/Full duplex)
[   44.925732] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   45.001214] batman_adv: bat0: Adding interface: eth0
[   45.006233] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[   45.030291] batman_adv: bat0: Interface activated: eth0
[   50.459193] batman_adv: bat0: MLD Querier appeared
[   67.509156] batman_adv: bat0: MLD Querier disappeared - multicast optimizations disabled
[   77.549128] batman_adv: bat0: MLD Querier appeared

My LEDE diffconfig looks like this:

CONFIG_TARGET_ar71xx=y
CONFIG_TARGET_ar71xx_generic=y
CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-bullet-m=y
CONFIG_DEVEL=y
CONFIG_BUSYBOX_CUSTOM=y
CONFIG_ALFRED_NEEDS_lua=y
CONFIG_BUILD_LOG=y
CONFIG_BUSYBOX_CONFIG_MESG=y
CONFIG_BUSYBOX_CONFIG_PKILL=y
CONFIG_BUSYBOX_CONFIG_RDATE=y
# CONFIG_BUSYBOX_CONFIG_SHA256SUM is not set
CONFIG_KMOD_BATMAN_ADV_BATMAN_V=y
CONFIG_KMOD_BATMAN_ADV_BLA=y
CONFIG_KMOD_BATMAN_ADV_DAT=y
CONFIG_KMOD_BATMAN_ADV_DEBUGFS=y
CONFIG_KMOD_BATMAN_ADV_MCAST=y
CONFIG_LIBCURL_COOKIES=y
CONFIG_LIBCURL_FILE=y
CONFIG_LIBCURL_FTP=y
CONFIG_LIBCURL_HTTP=y
CONFIG_LIBCURL_NO_SMB="!"
CONFIG_LIBCURL_POLARSSL=y
CONFIG_LIBCURL_PROXY=y
CONFIG_OPENSSL_ENGINE_CRYPTO=y
CONFIG_OPENSSL_WITH_DEPRECATED=y
CONFIG_OPENSSL_WITH_EC=y
CONFIG_OPENSSL_WITH_NPN=y
CONFIG_OPENSSL_WITH_PSK=y
CONFIG_OPENSSL_WITH_SRP=y
CONFIG_PACKAGE_ALFRED_BATHOSTS=y
CONFIG_PACKAGE_ALFRED_VIS=y
CONFIG_PACKAGE_alfred=y
CONFIG_PACKAGE_batctl=y
CONFIG_PACKAGE_bridge=y
CONFIG_PACKAGE_curl=y
CONFIG_PACKAGE_diffutils=y
# CONFIG_PACKAGE_dnsmasq is not set
# CONFIG_PACKAGE_firewall is not set
CONFIG_PACKAGE_horst=y
CONFIG_PACKAGE_iftop=y
# CONFIG_PACKAGE_ip6tables is not set
CONFIG_PACKAGE_iperf3=y
# CONFIG_PACKAGE_iptables is not set
CONFIG_PACKAGE_kmod-batman-adv=y
CONFIG_PACKAGE_kmod-bridge=y
CONFIG_PACKAGE_kmod-crypto-aead=y
CONFIG_PACKAGE_kmod-crypto-crc32c=y
CONFIG_PACKAGE_kmod-crypto-hash=y
CONFIG_PACKAGE_kmod-crypto-manager=y
CONFIG_PACKAGE_kmod-crypto-null=y
CONFIG_PACKAGE_kmod-crypto-pcompress=y
# CONFIG_PACKAGE_kmod-ip6tables is not set
# CONFIG_PACKAGE_kmod-ipt-conntrack is not set
# CONFIG_PACKAGE_kmod-ipt-core is not set
# CONFIG_PACKAGE_kmod-ipt-nat is not set
# CONFIG_PACKAGE_kmod-lib-crc-ccitt is not set
CONFIG_PACKAGE_kmod-lib-crc16=y
CONFIG_PACKAGE_kmod-lib-crc32c=y
CONFIG_PACKAGE_kmod-llc=y
# CONFIG_PACKAGE_kmod-nf-conntrack is not set
# CONFIG_PACKAGE_kmod-nf-conntrack6 is not set
# CONFIG_PACKAGE_kmod-nf-ipt is not set
# CONFIG_PACKAGE_kmod-nf-ipt6 is not set
# CONFIG_PACKAGE_kmod-nf-nat is not set
# CONFIG_PACKAGE_kmod-ppp is not set
CONFIG_PACKAGE_kmod-stp=y
CONFIG_PACKAGE_libcurl=y
# CONFIG_PACKAGE_libip4tc is not set
# CONFIG_PACKAGE_libip6tc is not set
CONFIG_PACKAGE_liblua=y
CONFIG_PACKAGE_libncursesw=y
CONFIG_PACKAGE_libnetsnmp=y
CONFIG_PACKAGE_libopenssl=y
CONFIG_PACKAGE_libpcap=y
CONFIG_PACKAGE_libpcre=y
CONFIG_PACKAGE_libpolarssl=y
CONFIG_PACKAGE_libpopt=y
CONFIG_PACKAGE_libpthread=y
CONFIG_PACKAGE_librt=y
# CONFIG_PACKAGE_libxtables is not set
CONFIG_PACKAGE_lua=y
# CONFIG_PACKAGE_odhcp6c is not set
# CONFIG_PACKAGE_odhcpd is not set
# CONFIG_PACKAGE_ppp is not set
CONFIG_PACKAGE_procps-ng=y
CONFIG_PACKAGE_procps-ng-free=y
CONFIG_PACKAGE_procps-ng-kill=y
CONFIG_PACKAGE_procps-ng-pgrep=y
CONFIG_PACKAGE_procps-ng-pkill=y
CONFIG_PACKAGE_procps-ng-pmap=y
CONFIG_PACKAGE_procps-ng-ps=y
CONFIG_PACKAGE_procps-ng-pwdx=y
CONFIG_PACKAGE_procps-ng-skill=y
CONFIG_PACKAGE_procps-ng-slabtop=y
CONFIG_PACKAGE_procps-ng-snice=y
CONFIG_PACKAGE_procps-ng-tload=y
CONFIG_PACKAGE_procps-ng-top=y
CONFIG_PACKAGE_procps-ng-uptime=y
CONFIG_PACKAGE_procps-ng-vmstat=y
CONFIG_PACKAGE_procps-ng-w=y
CONFIG_PACKAGE_procps-ng-watch=y
CONFIG_PACKAGE_ptp-utils=y
CONFIG_PACKAGE_rsync=y
CONFIG_PACKAGE_snmpd=y
CONFIG_PACKAGE_tcpdump=y
CONFIG_PACKAGE_terminfo=y
CONFIG_PACKAGE_wget=y
CONFIG_PACKAGE_wireless-tools=y
CONFIG_PACKAGE_zlib=y
CONFIG_RSYNC_zlib=y

My uci show looks like this (system and wireless elided):

alfred.alfred=alfred
alfred.alfred.mode='master'
alfred.alfred.batmanif='bat0'
alfred.alfred.start_vis='1'
alfred.alfred.run_facters='1'
alfred.alfred.interface='br-pub'
alfred.alfred.disabled='0'
batman-adv.bat0=mesh
batman-adv.bat0.bridge_loop_avoidance='0'
dropbear.@dropbear[0]=dropbear
dropbear.@dropbear[0].PasswordAuth='on'
dropbear.@dropbear[0].RootPasswordAuth='on'
dropbear.@dropbear[0].Port='22'
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.pub=interface
network.pub.type='bridge'
network.pub.proto='static'
network.pub.ip6assign='60'
network.pub.ifname='bat0'
network.pub.ipaddr='10.11.x.y'
network.pub.netmask='255.255.252.0'
network.pub.gateway='10.11.x.1'
network.pub.dns='10.11.x.1'
network.mesh=interface
network.mesh.mtu='1532'
network.mesh.proto='batadv'
network.mesh.mesh='bat0'
network.meshwire=interface
network.meshwire.proto='batadv'
network.meshwire.mesh='bat0'
network.meshwire.ifname='eth0'
09.03.2017611Base systemBug ReportVery LowHighdnsmasq Ignore resolv file option forget at restartAllUnconfirmed Task Description

If you set up dnsmasq to ignore resolv file it will ignore it until reboot is performed. To make ignore it again the option must be uncheck and apply and then check and apply again.

I have /etc/resolv.conf as a symlink to /tmp/resolv.conf, when the router boots up the contents are the dns offered from dhcp over the wan interface. When the ignore resolv option is checked or unchecked the contens are overwrited to search lan and nameserver 127.0.0.1 but it doesn’t seems to affect as if you uncheck ignore resolv the router resolv names, and when you check again the option it can resolv names even the contents still are search lan and nameserver 127.0.0.1.

I haven’t seen yet any other change that can cause the reboot to make dnsmasq follow resolv file when the option is checked until you uncheck-apply and check-apply.

09.03.2017612Base systemBug ReportVery LowHighWAN to LAN leakage on MT7620 devicesTrunkUnconfirmed Task Description

I am currently testing two MT7620 devices - the ZBT WE826 and the Sanlinking D240. During the first seconds of the boot, I see that packets leak between the WAN and LAN ports. Typically, this results in clients receiving a DHCP reply from my upstream router, rendering the clients without connectivity when the switch is properly initialized. I have also tested with the default firmware and do not see this behavior. Also, if I stop the devices in the bootloader, then packets do not leak until I resume boot again.

In order to try to solve this bug, I have tried to port some (at least to me) missing steps from the bootloader switch code and to the mt7620 switch driver in LEDE. This did not have an effect, at least not on the packet leak. A work-around I have found is to update u-boot and remove the input delay, so that the device will boot immediately. However, this is quite cumbersome to install and not very reliable. I suspect my luck with this work-around is more due to the timing of the DHCP clients in Ubuntu and Windows 10.

Does anyone have any idea as to what could be wrong and where to start looking?

Thanks in advance for any help.

 


17.04.2017714Base systemBug ReportVery LowHighARP/Broadcast does not reach other clients in the same ...AllUnconfirmed Task Description

I have the default bridge with ethernet and WLAN in it. When i try to send data from a client to another, both connected to the same WLAN SSID, it doesn’t work (Destination unreachable).
Wireshark shows that it sends endless ARP requests to Broadcast, but the other clients in that WLAN never get it (and therefore can’t answer). The broadcast gets still delivery to every client connected through Ethernet. If i create a second WLAN SSID (even on the same adapter) and and add it to the bridge, it gets also all broadcast packets from the other WLAN...
So if i put the 2 clients in different WLAN SSIDs or ethernet they get the broadcast from each other, but not when both are connected to the same.

The isolate option is not set in the wireless config.
Archer C5 v1 with latest LEDE snapshot (no difference to 17.01 stable or rc).

19.04.2017717Base systemBug ReportVery LowHighWRT3200ACM USB 3.0 ProblemAllUnconfirmed Task Description

I can´t get my Seagate Expansion Portable 1TB STEA1000400 USB3.0 drive to be be recognized on the USB 3.0 port of the router after a reboot or cold start on WRT3200 but if i remove and hotplug the drive, it is automatically detected and can be mounted.
It happens with images from Openwrt 15.05.1, LEDE 17.01.1 and many snapshots from both projects that i have installed. I have no problem with another usb2.0 drive from Samsung that is installed in another USB2.0 port.

After Cold START or REBOOT

 root@LEDE:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.20 (ag33e33@ubuntu) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3963-7ae58be) ) #0 SMP Wed Apr 12 16:12:18 2017
[    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: Linksys WRT3200ACM
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0646900, node_mem_map dfbf9000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] percpu: Embedded 13 pages/cpu @dfbce000 s22732 r8192 d22324 u53248
[    0.000000] pcpu-alloc: s22732 r8192 d22324 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,128K(u_env),256K(s_env),256K@8064K(devinfo),1920K@8320K(sysdiag),80m@10m(kernel),74m@16m(rootfs),80m@90m(alt_kernel),74m@96m(alt_rootfs),160m@10m(ubifs),-@170m(syscfg)
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512848K/524288K available (4545K kernel code, 180K rwdata, 1244K rodata, 280K init, 310K bss, 11440K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
                   lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0xc0008000 - 0xc0478918   (4547 kB)
                     .init : 0xc05d4000 - 0xc061a000   ( 280 kB)
                     .data : 0xc061a000 - 0xc0647200   ( 181 kB)
                      .bss : 0xc0647200 - 0xc0694a00   ( 310 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000000] Selected CPU frequency (16) unsupported
[    0.000000] Switching to timer-based delay loop, resolution 40ns
[    0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
[    0.000008] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000114] Calibrating local timer... 933.22MHz.
[    0.060032] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.060037] pid_max: default: 32768 minimum: 301
[    0.060076] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.060079] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.060274] CPU: Testing write buffer coherency: ok
[    0.060365] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.060376] Setting up static identity map for 0x8280 - 0x82d8
[    0.060434] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[    0.060494] mvebu-pmsu: Initializing Power Management Service Unit
[    0.060904] Booting CPU 1
[    0.061041] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.061070] Brought up 2 CPUs
[    0.061075] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[    0.061078] CPU: All CPU(s) started in SVC mode.
[    0.062739] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.062790] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.062796] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.062831] pinctrl core: initialized pinctrl subsystem
[    0.063142] NET: Registered protocol family 16
[    0.063575] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.090041] cpuidle: using governor ladder
[    0.090171] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    0.090177] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    0.120467] reg-fixed-voltage xhci0-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/xhci0-vbus-pins, deferring probe
[    0.120607] SCSI subsystem initialized
[    0.120687] libata version 3.00 loaded.
[    0.120790] usbcore: registered new interface driver usbfs
[    0.120815] usbcore: registered new interface driver hub
[    0.120835] usbcore: registered new device driver usb
[    0.121329] clocksource: Switched to clocksource armada_370_xp_clocksource
[    0.121647] NET: Registered protocol family 2
[    0.121869] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.121890] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.121920] TCP: Hash tables configured (established 4096 bind 4096)
[    0.121941] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.121952] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.122009] NET: Registered protocol family 1
[    0.122021] PCI: CLS 0 bytes, default 64
[    0.122803] Crashlog allocated RAM at address 0x3f00000
[    0.122877] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.124945] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.124953] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.125699] io scheduler noop registered
[    0.125703] io scheduler deadline registered (default)
[    0.126071] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    0.126671] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[    0.126679] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    0.126683] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[    0.126687] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.126701] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[    0.126784] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[    0.126859] PCI: bus0: Fast back to back transfers disabled
[    0.126864] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.126870] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.126918] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000
[    0.126933] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref]
[    0.126943] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref]
[    0.127002] pci 0000:01:00.0: supports D1 D2
[    0.127005] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.127068] PCI: bus1: Fast back to back transfers disabled
[    0.127073] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.127132] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000
[    0.127151] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref]
[    0.127162] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref]
[    0.127244] pci 0000:02:00.0: supports D1 D2
[    0.127246] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.127310] PCI: bus2: Fast back to back transfers disabled
[    0.127315] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    0.127384] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
[    0.127390] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
[    0.127396] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.127405] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[    0.127413] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.127418] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe02fffff]
[    0.127425] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[    0.127434] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
[    0.127443] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.127448] pci 0000:00:02.0:   bridge window [mem 0xe0400000-0xe06fffff]
[    0.127646] mv_xor f1060800.xor: Marvell shared XOR driver
[    0.181754] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    0.181840] mv_xor f1060900.xor: Marvell shared XOR driver
[    0.241717] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    0.241857] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.242621] console [ttyS0] disabled
[    0.262683] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A
[    0.983287] console [ttyS0] enabled
[    0.988691] loop: module loaded
[    0.992090] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    1.001176] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    1.010274] scsi host0: ahci-mvebu
[    1.013847] scsi host1: ahci-mvebu
[    1.017348] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[    1.025306] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[    1.033594] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[    1.041369] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[    1.047747] nand: AMD/Spansion S34ML02G2
[    1.051690] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[    1.059379] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
[    1.066556] Bad block table found at page 131008, version 0x01
[    1.072752] Bad block table found at page 130944, version 0x01
[    1.078863] 11 ofpart partitions found on MTD device pxa3xx_nand-0
[    1.085074] Creating 11 MTD partitions on "pxa3xx_nand-0":
[    1.090582] 0x000000000000-0x000000200000 : "u-boot"
[    1.095830] 0x000000200000-0x000000220000 : "u_env"
[    1.100951] 0x000000220000-0x000000260000 : "s_env"
[    1.106089] 0x0000007e0000-0x000000820000 : "devinfo"
[    1.111433] 0x000000820000-0x000000a00000 : "sysdiag"
[    1.116797] 0x000000a00000-0x000005a00000 : "kernel1"
[    1.122301] 0x000001000000-0x000005a00000 : "ubi"
[    1.127404] 0x000005a00000-0x00000aa00000 : "kernel2"
[    1.132905] 0x000006000000-0x00000aa00000 : "rootfs2"
[    1.138362] 0x00000aa00000-0x000010000000 : "syscfg"
[    1.143774] 0x000000260000-0x000000820000 : "unused_area"
[    1.149701] libphy: Fixed MDIO Bus: probed
[    1.154064] libphy: orion_mdio_bus: probed
[    1.158297] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[    1.166962] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:b9:ea:c0
[    1.175959] mvneta f1034000.ethernet eth1: Using random mac address a2:8d:5e:6d:ee:98
[    1.183881] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.190435] ehci-pci: EHCI PCI platform driver
[    1.194928] ehci-platform: EHCI generic platform driver
[    1.200245] ehci-orion: EHCI orion driver
[    1.204336] orion-ehci f1058000.usb: EHCI Host Controller
[    1.209765] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    1.217412] orion-ehci f1058000.usb: irq 37, io mem 0xf1058000
[    1.251329] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    1.257480] hub 1-0:1.0: USB hub found
[    1.261254] hub 1-0:1.0: 1 port detected
[    1.265551] usbcore: registered new interface driver usb-storage
[    1.271723] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[    1.279341] i2c /dev entries driver
[    1.294252] orion_wdt: Initial timeout 171 sec
[    1.298933] sdhci: Secure Digital Host Controller Interface driver
[    1.305146] sdhci: Copyright(c) Pierre Ossman
[    1.362546] ata1: SATA link down (SStatus 0 SControl 300)
[    1.367991] ata2: SATA link down (SStatus 0 SControl 300)
[    1.371354] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[    1.371428] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.377154] marvell-cesa f1090000.crypto: CESA device successfully registered
[    1.377556] NET: Registered protocol family 10
[    1.391590] NET: Registered protocol family 17
[    1.391604] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.391605] 8021q: 802.1Q VLAN Support v1.8
[    1.391661] Registering SWP/SWPB emulation handler
[    1.392791] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.392803] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[    1.392861] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    1.392881] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[    1.393134] hub 2-0:1.0: USB hub found
[    1.393160] hub 2-0:1.0: 1 port detected
[    1.393247] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.393253] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[    1.393292] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.393478] hub 3-0:1.0: USB hub found
[    1.393501] hub 3-0:1.0: 1 port detected
[    1.393820] UBI: auto-attach mtd6
[    1.393824] ubi0: attaching mtd6
[    1.397930] random: fast init done
[    1.401551] mmc0: new high speed SDIO card at address 0001
[    1.593092] ubi0: scanning is finished
[    1.601334] ubi0: attached mtd6 (name "ubi", size 74 MiB)
[    1.606756] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.613664] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.620479] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.627475] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0
[    1.633508] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    1.640759] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1419003487
[    1.649932] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 40
[    1.659197] ubi0: background thread "ubi_bgt0d" started, PID 668
[    1.659208] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    1.659643] block ubiblock0_0: created from ubi0:0(rootfs)
[    1.659645] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    1.659829] mvsw61xx 10.mvsw61xx: Found MV88E6352 at f1072004.mdio-mi:10
[    1.659832] mvsw61xx 10.mvsw61xx: Using direct addressing
[    1.671972] armada38x-rtc f10a3800.rtc: setting system clock to 2101-11-05 12:45:50 UTC (4160637950)
[    1.705850] Waiting 1 sec before mounting root device...
[    1.852932] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.859142] scsi host2: usb-storage 1-1:1.0
[    2.722974] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    2.730260] Freeing unused kernel memory: 280K (c05d4000 - c061a000)
[    2.736655] This architecture does not have kernel memory protection.
[    2.855724] init: Console is alive
[    2.859203] init: - watchdog -
[    2.924338] scsi 2:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
[    3.111498] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.151660] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.159777] sd 2:0:0:0: [sda] Write Protect is off
[    3.164597] sd 2:0:0:0: [sda] Mode Sense: 28 00 00 00
[    3.165152] sd 2:0:0:0: [sda] No Caching mode page found
[    3.170490] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    3.179038]  sda: sda1
[    3.183653] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.188738] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.195221] ohci-platform: OHCI generic platform driver
[    3.200902] uhci_hcd: USB Universal Host Controller Interface driver
[    3.207556] ohci-pci: OHCI PCI platform driver
[    3.212156] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.228593] init: - preinit -
[    3.422394] mvneta f1070000.ethernet tmp0: renamed from eth0
[    3.462586] mvneta f1034000.ethernet eth0: renamed from eth1
[    3.512510] mvneta f1070000.ethernet eth1: renamed from tmp0
[    3.833291] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[    3.840562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.846607] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[    3.854578] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.909798] mount_root: loading kmods from internal overlay
[    5.921475] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    5.929503] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    6.328768] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 806
[    6.357145] UBIFS (ubi0:1): recovery needed
[    6.403932] random: crng init done
[    6.431762] UBIFS (ubi0:1): recovery completed
[    6.436249] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    6.444117] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.454076] UBIFS (ubi0:1): FS size: 61329408 bytes (58 MiB, 483 LEBs), journal size 3047424 bytes (2 MiB, 24 LEBs)
[    6.464556] UBIFS (ubi0:1): reserved for root: 2896739 bytes (2828 KiB)
[    6.471198] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DEE50754-EFFE-4990-A7A6-C97266C9BEF0, small LPT model
[    6.483473] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[    6.493882] block: extroot: not configured
[    6.531369] UBIFS (ubi0:1): un-mount UBI device 0
[    6.536097] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[    6.544028] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 809
[    6.591527] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    6.599392] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.609356] UBIFS (ubi0:1): FS size: 61329408 bytes (58 MiB, 483 LEBs), journal size 3047424 bytes (2 MiB, 24 LEBs)
[    6.619838] UBIFS (ubi0:1): reserved for root: 2896739 bytes (2828 KiB)
[    6.626483] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DEE50754-EFFE-4990-A7A6-C97266C9BEF0, small LPT model
[    6.641627] mount_root: loading kmods from internal overlay
[    6.652909] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[    6.670201] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[    7.078279] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[    7.086484] block: extroot: not configured
[    7.132013] mount_root: switching to ubifs overlay
[    7.176201] ubi1: attaching mtd9
[    7.407547] ubi1: scanning is finished
[    7.415742] ubi1: attached mtd9 (name "syscfg", size 86 MiB)
[    7.421435] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    7.428338] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    7.435155] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[    7.442148] ubi1: good PEBs: 680, bad PEBs: 8, corrupted PEBs: 0
[    7.448177] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    7.455430] ubi1: max/mean erase counter: 6/4, WL threshold: 4096, image sequence number: 1148089792
[    7.464603] ubi1: available PEBs: 0, total reserved PEBs: 680, PEBs reserved for bad PEB handling: 32
[    7.473869] ubi1: background thread "ubi_bgt1d" started, PID 824
[    7.485213] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 828
[    7.537764] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "syscfg"
[    7.545202] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.555161] UBIFS (ubi1:0): FS size: 80375808 bytes (76 MiB, 633 LEBs), journal size 4063232 bytes (3 MiB, 32 LEBs)
[    7.565642] UBIFS (ubi1:0): reserved for root: 3796347 bytes (3707 KiB)
[    7.572287] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A5EAB2F8-92D3-4D0B-A69A-9F6CA9A608B3, small LPT model
[    7.585463] urandom-seed: Seeding with /etc/urandom.seed
[    7.684142] procd: - early -
[    7.687055] procd: - watchdog -
[    8.315049] procd: - ubus -
[    8.371904] procd: - init -
[    8.546612] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.557859] tun: Universal TUN/TAP device driver, 1.6
[    8.562965] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    8.571391] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    8.580401] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.587876] cryptodev: driver 1.8 loaded.
[    8.592340] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[    8.600387] Backport generated by backports.git backports-20160324-13-g24da7d3c
[    8.615059] <<Marvell 802.11ac Wireless Network Driver version 10.3.2.0-20170110>>
[    8.622702] pci 0000:00:01.0: enabling device (0140 -> 0142)
[    8.628443] ieee80211 phy0: priv->iobase0 = e0f80000
[    8.628454] ieee80211 phy0: priv->iobase1 = e1200000
[    8.628463] ieee80211 phy0: priv->pcmd_buf = ddf08000  priv->pphys_cmd_buf = 1df08000
[    8.636458] ieee80211 phy0: fw download start
[    8.699990] ieee80211 phy0: FwSize = 207660 downloaded Size = 207660 curr_iteration 65522
[   12.431324] ieee80211 phy0: fw download complete
[   12.431783] ieee80211 phy0: pcmd = ddf08000
[   12.449817] ieee80211 phy0: firmware version: 0x7080004
[   12.809338] ieee80211 phy0: firmware region code: 10
[   12.851995] ieee80211 phy0: 2G disabled, 5G enabled
[   12.856895] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[   12.862298] pci 0000:00:02.0: enabling device (0140 -> 0142)
[   12.868032] ieee80211 phy1: priv->iobase0 = e1380000
[   12.868043] ieee80211 phy1: priv->iobase1 = e1600000
[   12.868052] ieee80211 phy1: priv->pcmd_buf = dddf0000  priv->pphys_cmd_buf = 1ddf0000
[   12.874418] ieee80211 phy1: fw download start
[   12.939175] ieee80211 phy1: FwSize = 207660 downloaded Size = 207660 curr_iteration 65527
[   14.327325] ieee80211 phy1: fw download complete
[   14.327812] ieee80211 phy1: pcmd = dddf0000
[   14.345344] ieee80211 phy1: firmware version: 0x7080004
[   14.706323] ieee80211 phy1: firmware region code: 10
[   14.750021] ieee80211 phy1: 2G enabled, 5G disabled
[   14.754934] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[   14.762803] u32 classifier
[   14.765522]     input device check on
[   14.769196]     Actions configured
[   14.773037] Mirror/redirect action on
[   14.778285] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[   14.790080] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.799009] mwifiex: rx work enabled, cpus 2
[   14.846998] usbcore: registered new interface driver ums-alauda
[   14.853672] usbcore: registered new interface driver ums-cypress
[   14.860218] usbcore: registered new interface driver ums-datafab
[   14.866723] usbcore: registered new interface driver ums-freecom
[   14.873187] usbcore: registered new interface driver ums-isd200
[   14.879542] usbcore: registered new interface driver ums-jumpshot
[   14.886112] usbcore: registered new interface driver ums-karma
[   14.892282] usbcore: registered new interface driver ums-sddr09
[   14.898499] usbcore: registered new interface driver ums-sddr55
[   14.904752] usbcore: registered new interface driver ums-usbat
[   14.917781] xt_time: kernel timezone is -0000
[   14.925132] PPP generic driver version 2.4.2
[   14.929843] NET: Registered protocol family 24
[   14.935112] kmodloader: done loading kernel modules from /etc/modules.d/*
[   15.469997] mwifiex_sdio mmc0:0001:1: info: FW download over, size 391772 bytes
[   15.831665] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[   15.864262] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x242 error, result=0x2
[   15.871261] mwifiex_sdio mmc0:0001:1: mwifiex_process_cmdresp: cmd 0x242 failed during       initialization
[   15.890625] mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.7.p5)
[   15.898674] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.68.7.p5)
[   16.052347] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[   16.059309] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.065375] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   16.073372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   16.081683] br-lan: port 1(eth0.1) entered blocking state
[   16.087106] br-lan: port 1(eth0.1) entered disabled state
[   16.092675] device eth0.1 entered promiscuous mode
[   16.097485] device eth0 entered promiscuous mode
[   16.103227] br-lan: port 1(eth0.1) entered blocking state
[   16.108650] br-lan: port 1(eth0.1) entered forwarding state
[   16.122758] mvneta f1070000.ethernet eth1: configuring for fixed link mode
[   16.130044] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   16.136169] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   16.144170] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   16.342477] pppoe-wan: renamed from ppp0
[   16.900336] ieee80211 phy1: change: 0xffffffff
[   17.006509] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   17.137396] ieee80211 phy0: change: 0xffffffff
[   17.271596] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.277594] br-lan: port 2(wlan1) entered blocking state
[   17.282955] br-lan: port 2(wlan1) entered disabled state
[   17.288408] device wlan1 entered promiscuous mode
[   17.293166] br-lan: port 2(wlan1) entered blocking state
[   17.298502] br-lan: port 2(wlan1) entered forwarding state
[   17.304255] br-lan: port 2(wlan1) entered disabled state
[   17.309734] br-lan: port 3(wlan0) entered blocking state
[   17.315091] br-lan: port 3(wlan0) entered disabled state
[   17.320543] device wlan0 entered promiscuous mode
[   17.327109] ieee80211 phy0: change: 0x100
[   17.344423] ieee80211 phy0: change: 0x40
[   17.380440] ieee80211 phy1: change: 0x100
[   17.392530] ieee80211 phy1: change: 0x42
[   17.593821] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   17.600257] br-lan: port 2(wlan1) entered blocking state
[   17.605603] br-lan: port 2(wlan1) entered forwarding state
[   17.611269] ieee80211 phy0: change: 0x40
[   17.671185] ieee80211 phy1: change: 0x20
[   17.861365] ieee80211 phy0: change: 0x40
[   17.993370] ieee80211 phy0: change: 0x100
[   18.060535] ieee80211 phy0: change: 0x100
[   18.073629] ieee80211 phy0: change: 0x42
[   18.341340] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   18.347812] br-lan: port 3(wlan0) entered blocking state
[   18.353170] br-lan: port 3(wlan0) entered forwarding state
 root@LEDE:~# lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04e8:1f05 Samsung Electronics Co., Ltd S2 Portable [JMicron] (500GB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

After i remove the cable and hotplug i get this additional lines in DMESG:

 #
[  527.103849] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
[  527.134880] usb-storage 3-1:1.0: USB Mass Storage device detected
[  527.141155] scsi host3: usb-storage 3-1:1.0
[  528.154087] scsi 3:0:0:0: Direct-Access     Seagate  Expansion        1805 PQ: 0 ANSI: 6
[  529.455313] sd 3:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[  529.463210] sd 3:0:0:0: [sdb] Write Protect is off
[  529.468032] sd 3:0:0:0: [sdb] Mode Sense: 33 00 00 08
[  529.473381] sd 3:0:0:0: [sdb] No Caching mode page found
[  529.478724] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  529.499962]  sdb: sdb1 sdb2
[  529.503903] sd 3:0:0:0: [sdb] Attached SCSI disk
[  612.132851] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts:
root@LEDE:~# lsusb
Bus 003 Device 002: ID 0bc2:231b Seagate RSS LLC
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04e8:1f05 Samsung Electronics Co., Ltd S2 Portable [JMicron] (500GB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub 


25.07.2017931Base systemBug ReportVery LowHighOnboard Bluetooth not working on Raspberry Pi 3 BAllAssigned Task Description

I have tried LEDE 17.01.1 and 17.01.2 and i can’t get bluetooth running on raspberry pi 3.

It will not flash the firmware for the bluetooth controller on rpi3, when device is brought up:

root@LEDE:~# /usr/bin/hciattach /dev/ttyAMA0 bcm43xx 921600 noflow -
bcm43xx_init
Patch not found for BCM43430A1, continue anyway
Set Controller UART speed to 921600 bit/s
Device setup complete

Instead of patch not found it should produce:
Flash firmware /lib/firmware/brcm/BCM43430A1.hcd

I could not find this firmware via opkg, so i used a file from OpenELEC at
https://github.com/OpenELEC/misc-firmware/tree/master/firmware/brcm

This however won’t load and bluetooth is not initialized correctly and unusable:

root@LEDE:~# /usr/bin/hciattach /dev/ttyAMA0 bcm43xx 921600 noflow -
bcm43xx_init
Flash firmware /lib/firmware/brcm/BCM43430A1.hcd
Initialization timed out

 


05.11.20171148Base systemBug ReportVery LowHighAR7 images for Fritz!Box 7170 build but do not bootTrunkUnconfirmed Task Description

Hi there,
I’m trying to get the latest LEDE with Kernel 4.9 up and running with an old Fritz!Box 7170 (ar7/EVA).
The images build fine but they are not booting at all.

Is someone able to help? I have tried to collect the “internet knowledge” about this device in this github.
I also found some very old OpenWRT patches (1)(2) for whom I don’t know if they were ever integrated in master.
I’m not a developer myself, so I don’t even know how to integrate patches to try them out.

I also created a forum thread if anyone has some more tips or ideas.

06.11.20171153Base systemFeature RequestVery LowHighConsider security monitoring featuresTrunkUnconfirmed Task Description

I see it as email notification about security events.

Examples of security events:

  • Attempts to bruteforce SSH password.
  • Appear unknown MAC’s in network.
  • Deauthentication attacks on Wi-Fi.

Monitoring is very important part of security.

25.11.20171192Base systemBug ReportVery LowHigh2.4Ghz wifi AP on mt7621 / Afoundry EW1200 doesn't workTrunkUnconfirmed Task Description

Hi LEDE folks!

I’m running the latest snapshot (r5406-5e6792e) of LEDE on an Afoundry EW1200. It’s a vast improvement from the stock firmware - my heartfelt gratitude to the author(s) of the port.

There’s one problem. 5Ghz wifi works fine but 2.4Ghz doesn’t. It detects my 2.4Ghz device and when I hit “scan” in LuCI it returns a list of nearby SSIDs.

But when I try to configure the device as an access point it isn’t visible to any of my devices. I’ve tried various channels / settings but nothing makes a difference.

Steps to reproduce:

1. Install LEDE r5406-5e6792e snapshot (latest at the time of writing) on an Afoundry EW1200
2. Use opkg to install LuCI [NB: I don’t think LuCI is to blame; it’s just the interface I use]
3. In Network/Wireless hit “Scan” for “Generic MAC80211 802.11bgn” and verify it can detect other people’s networks
4. Back in Network/Wireless, hit add (or edit) to configure an access point on that device. Use any settings you like.
5. LuCI shows the AP as running but no other device can detect the SSID it’s broadcasting.

22.01.20181286Base systemBug ReportVery LowHighNetwork startup happens too late with kernel 4.14TrunkUnconfirmed Task Description

Software version: r5917-36f1978a70-x86-64, device: x86-64 PC.

I’ve built 2 versions - one with default kernel 4.9 and another one with kernel 4.14.

The version with kernel 4.9 works fine. Netifd sets up network interfaces, after that another daemons are started.

The version with kernel 4.14 does not work as expected. Another daemons are started before network interface setup. In my case, this prevents the VPN server from working correctly. I have to manually restart VPN service after every reboot. This may potentially affect another software.

I have attached the log files. Please note the startup order as found in the log files:

kernel 4.9: netifd interface setup → block → dropbear → xl2tpd → openvpn
kernel 4.14: block → dropbear → xl2tpd → openvpn → netifd interface setup

I have no idea how a kernel version may affect the startup order. Maybe there is a kind of race condition.


29.01.20181311Base systemBug ReportVery LowHighprocd: mount /tmp with zramTrunkNew Task Description

Supply the following if possible:
- Device problem occurs on all device
- Software versions of OpenWrt/LEDE: Trunk

If i select this option in menuconfig, At the boot procd mount the wrong size of ram. I have 512mb of ram and procd mount only 11mb of ram. More detail here.
http://lists.infradead.org/pipermail/lede-dev/2018-January/011008.html

https://forum.lede-project.org/t/no-space-left-in-tmp/11000/14


01.02.20181317Base systemBug ReportVery LowHighom2p-lc sysupgrade fails silentlyTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on Openmesh om2p-lc
- Software versions of OpenWrt/LEDE release, packages, etc.
LEDE Reboot SNAPSHOT r5360-a8a23ca

- Steps to reproduce
sysupgrade -n /tmp/lede-ar71xx-generic-om2p-squashfs-sysupgrade.bin
Sysupgrade appears to go through the motions but firmware doesn’t upgrade and doesn’t delete config files with the -n switch.
I’ve tried the factory and the sysupgrade file with the same results. This build upgrades as expedted with a tl-mr3420-v2 and tl-wr740n-v4.

Not sure if it’s related but the om-watchdog init script also fails to detect the board type so doesn’t start.
Changing this line in the /etc/init.d/om-watchdog init script gets the watchdog to start which make me think it’s an identification issue.
local board=$(ar71xx_board_name)
change to
local board=$(cat /tmp/sysinfo/board_name)

 


11.02.20181347Base systemBug ReportVery LowHighAsus WL500GP V2 reboots when you`re trying to send fileAllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

I`m using Asus WL500GP V2 with Huawei E3372s with HiLink fw (I tested stick fw too). I`ve tried all LEDE versions. You can reproduce easily, just try to attach file to letter, or send file to cloud. 99% that router will reboot.

16.03.20181437Base systemBug ReportVery LowHighTrunk r6421 not save configuration on ER3.TrunkUnconfirmed Task Description

Problem on ER3 r6421.

Flashing success, but not save configuration. Every time i'm reboot, router roll back to default config.

Here are serial output:

## Loading Linux kernel with entry point: 0xffffffff815efa20 ...
Bootloader: Done loading app on coremask: 0x3
[    0.000000] Linux version 4.14.25 (teq@teqdesk) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6302-0f54d96d24)) #0 SMP Sun Mar 18
[    0.000000] CVMSEG size: 2 cache lines (256 bytes)
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 000d0601 (Cavium Octeon+)
[    0.000000] Checking for the multiply/shift bug... no.
[    0.000000] Checking for the daddiu bug... no.
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 0000000005400000 @ 0000000002a00000 (usable)
[    0.000000]  memory: 0000000007c00000 @ 0000000008200000 (usable)
[    0.000000]  memory: 000000000fc00000 @ 0000000410000000 (usable)
[    0.000000]  memory: 0000000001826e20 @ 0000000001100000 (usable)
[    0.000000] Wasting 243712 bytes for tracking 4352 unused pages
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Using internal Device Tree.
[    0.000000] software IO TLB [mem 0x0398e000-0x0798e000] (64MB) mapped at [800000000398e000-800000000798dfff]
[    0.000000] Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
[    0.000000] Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000000000-0x00000000efffffff]
[    0.000000]   Normal   [mem 0x00000000f0000000-0x000000041fbfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000002925fff]
[    0.000000]   node   0: [mem 0x0000000002a00000-0x0000000007dfffff]
[    0.000000]   node   0: [mem 0x0000000008200000-0x000000000fdfffff]
[    0.000000]   node   0: [mem 0x0000000410000000-0x000000041fbfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000041fbfffff]
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 19 pages/cpu @80000000079f9000 s39344 r8192 d30288 u77824
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 126539
[    0.000000] Kernel command line: mtdparts=phys_mapped_flash:512k(boot0)ro,512k(boot1)ro,64k(eeprom)ro root=/dev/sda2 root0
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Memory: 396916K/513176K available (5086K kernel code, 330K rwdata, 1236K rodata, 1328K init, 16731K bss, 1162)
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 127
[   13.844962] clocksource: OCTEON_CVMCOUNT: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
[   13.855830] Calibrating delay loop (skipped) preset value.. 1000.00 BogoMIPS (lpj=2000000)
[   13.864040] pid_max: default: 32768 minimum: 301
[   13.868767] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[   13.875252] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[   13.882962] Checking for the daddi bug... no.
[   13.888198] Hierarchical SRCU implementation.
[   13.893207] smp: Bringing up secondary CPUs ...
[   13.898265] SMP: Booting CPU01 (CoreId  1)...
[   13.902655] CPU1 revision is: 000d0601 (Cavium Octeon+)
[   13.902885] smp: Brought up 1 node, 2 CPUs
[   13.916204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[   13.925852] futex hash table entries: 512 (order: 4, 65536 bytes)
[   13.932600] NET: Registered protocol family 16
[   13.947309] Not in host mode, PCI Controller not initialized
[   13.968490] SCSI subsystem initialized
[   13.972686] usbcore: registered new interface driver usbfs
[   13.978233] usbcore: registered new interface driver hub
[   13.983653] usbcore: registered new device driver usb
[   13.990959] clocksource: Switched to clocksource OCTEON_CVMCOUNT
[   13.998255] NET: Registered protocol family 2
[   14.003415] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[   14.010447] TCP bind hash table entries: 4096 (order: 5, 131072 bytes)
[   14.016998] TCP: Hash tables configured (established 4096 bind 4096)
[   14.023382] UDP hash table entries: 256 (order: 2, 24576 bytes)
[   14.029247] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[   14.035842] NET: Registered protocol family 1
[   14.041861] Crashlog allocated RAM at address 0x3f00000
[   14.047176] workingset: timestamp_bits=62 max_order=17 bucket_order=0
[   14.065676] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   14.071763] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[   14.086436] io scheduler noop registered
[   14.090468] io scheduler deadline registered (default)
[   14.096184] octeon_gpio 1070000000800.gpio-controller: OCTEON GPIO driver probed.
[   14.103985] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   14.111417] console [ttyS0] disabled
[   14.114893] 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 41, base_baud = 31250000) is a OCTEON
[   14.124683] console [ttyS0] enabled
[   14.124683] console [ttyS0] enabled
[   14.131607] bootconsole [early0] disabled
[   14.131607] bootconsole [early0] disabled
[   14.140285] 1180000000c00.serial: ttyS1 at MMIO 0x1180000000c00 (irq = 42, base_baud = 31250000) is a OCTEON
[   14.150793] octeon_rng octeon_rng: Octeon Random Number Generator
[   14.157467] cacheinfo: Failed to find cpu0 device node
[   14.162685] cacheinfo: Unable to detect cache hierarchy for CPU 0
[   14.175673] loop: module loaded
[   14.179780] of-flash 1f400000.nor: Can't get bank width from device tree
[   14.187061] libphy: mdio_octeon: probed
[   14.191005] [Firmware Warn]: /soc@0/mdio@1180000001800/ethernet-phy@7: Whitelisted compatible string. Please remove
[   14.202182] [Firmware Warn]: /soc@0/mdio@1180000001800/ethernet-phy@6: Whitelisted compatible string. Please remove
[   14.213362] [Firmware Warn]: /soc@0/mdio@1180000001800/ethernet-phy@5: Whitelisted compatible string. Please remove
[   14.224507] mdio_octeon 1180000001800.mdio: Probed
[   14.229932] libphy: Fixed MDIO Bus: probed
[   14.234303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   14.240892] ehci-platform: EHCI generic platform driver
[   14.246401] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   14.252671] ohci-platform: OHCI generic platform driver
[   14.258302] usbcore: registered new interface driver usb-storage
[   14.264425] octeon_wdt: Initial granularity 5 Sec
[   14.273052] Interface 0 has 3 ports (RGMII)
[   14.281525] octeon-hcd 16f0010000000.usbc: Octeon Host Controller
[   14.287752] octeon-hcd 16f0010000000.usbc: new USB bus registered, assigned bus number 1
[   14.295976] octeon-hcd 16f0010000000.usbc: irq 56, io mem 0x00000000
[   14.303455] hub 1-0:1.0: USB hub found
[   14.307394] hub 1-0:1.0: 1 port detected
[   14.311991] octeon-hcd 16f0010000000.usbc: Registered HCD for port 0 on irq 56
[   14.320877] NET: Registered protocol family 10
[   14.327445] Segment Routing with IPv6
[   14.331299] NET: Registered protocol family 17
[   14.335870] 8021q: 802.1Q VLAN Support v1.8
[   14.340407] Bootbus flash: Setting flash for 4MB flash at 0x1f800000
[   14.346967] phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000a7
[   14.357360] Amd/Fujitsu Extended Query Table at 0x0040
[   14.362566]   Amd/Fujitsu Extended Query version 1.1.
[   14.367649] phys_mapped_flash: Swapping erase regions for top-boot CFI table.
[   14.374815] number of CFI chips: 1
[   14.378278] 3 cmdlinepart partitions found on MTD device phys_mapped_flash
[   14.385191] Creating 3 MTD partitions on "phys_mapped_flash":
[   14.390979] 0x000000000000-0x000000080000 : "boot0"
[   14.397066] 0x000000080000-0x000000100000 : "boot1"
[   14.403212] 0x000000100000-0x000000110000 : "eeprom"
[   14.411056] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
[   14.418316] Waiting for root device /dev/sda2...
[   14.694990] usb 1-1: new high-speed USB device number 2 using octeon-hcd
[   15.157589] usb-storage 1-1:1.0: USB Mass Storage device detected
[   15.164285] scsi host0: usb-storage 1-1:1.0
[   16.377528] scsi 0:0:0:0: Direct-Access     SRT      USB              1100 PQ: 0 ANSI: 4
[   16.387726] sd 0:0:0:0: [sda] 15765504 512-byte logical blocks: (8.07 GB/7.52 GiB)
[   16.396124] sd 0:0:0:0: [sda] Write Protect is off
[   16.401790] sd 0:0:0:0: [sda] No Caching mode page found
[   16.407211] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   16.417477]  sda: sda1 sda2
[   16.423799] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   16.435439] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[   16.443711] Freeing unused kernel memory: 1328K
[   16.448300] This architecture does not have kernel memory protection.
[   16.979499] init: Console is alive
[   16.983324] init: - watchdog -
[   17.607797] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[   17.722469] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[   17.740277] init: - preinit -
[   18.930430] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   20.963071] eth0: 1000 Mbps Full duplex, port 0, queue 0
[   20.968484] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.208639] mount_root: rootdisk overlay filesystem has not been formatted yet
sh: mkfs.f2fs: not found
[   22.221786] mount_root: no usable overlay filesystem found, using tmpfs overlay
[   23.377720] random: crng init done
[   23.407105] urandom-seed: Seed file not found (/etc/urandom.seed)
[   23.538293] eth0: Link down
[   23.551669] procd: - early -
[   23.554692] procd: - watchdog -
[   24.221523] procd: - watchdog -
[   24.225235] procd: - ubus -
[   24.364194] procd: - init -
Please press Enter to activate this console.
[   24.943579] kmodloader: loading kernel modules from /etc/modules.d/*
[   24.964605] l2tp_core: L2TP core driver, V2.0
[   24.970234] l2tp_netlink: L2TP netlink interface
[   24.980069] gre: GRE over IPv4 demultiplexor driver
[   24.987409] ip_gre: GRE over IPv4 tunneling driver
[   25.001262] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   25.289771] Netfilter messages via NETLINK v0.30.
[   25.297611] ip_set: protocol 6
[   25.337788] cryptodev: driver 1.9 loaded.
[   25.358006] u32 classifier
[   25.360794]     input device check on
[   25.364596]     Actions configured
[   25.371338] Mirror/redirect action on
[   25.386211] nf_conntrack version 0.5.0 (3584 buckets, 14336 max)
[   25.405328] ip_tables: (C) 2000-2006 Netfilter Core Team
[   25.553490] ctnetlink v0.93: registering with nfnetlink.
[   25.698364] wireguard: WireGuard 0.0.20180304 loaded. See www.wireguard.com for information.
[   25.706931] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   25.765405] xt_time: kernel timezone is -0000
[   25.858495] PPP generic driver version 2.4.2
[   25.865711] PPP MPPE Compression module registered
[   25.872986] NET: Registered protocol family 24
[   25.879616] PPTP driver version 0.8.5
[   25.888062] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   25.896812] kmodloader: done loading kernel modules from /etc/modules.d/*
[   32.622166] br-lan: port 1(eth0) entered blocking state
[   32.627510] br-lan: port 1(eth0) entered disabled state
[   32.633218] device eth0 entered promiscuous mode
[   32.648210] br-lan: port 1(eth0) entered blocking state
[   32.653545] br-lan: port 1(eth0) entered forwarding state
[   32.659197] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   32.700308] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   33.645742] br-lan: port 1(eth0) entered disabled state
[   34.746429] eth0: 1000 Mbps Full duplex, port 0, queue 0
[   34.763064] br-lan: port 1(eth0) entered blocking state
[   34.768376] br-lan: port 1(eth0) entered forwarding state
[   34.807116] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   35.811122] eth1: 1000 Mbps Full duplex, port 1, queue 1
[   35.816578] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   39.261056] MTD: Attempt to mount non-MTD device "/dev/loop0"
27.04.20181520Base systemFeature RequestVery LowHighCOMFAST CF-E380AC Switch 'VLAN' FeaturesTrunkUnconfirmed Task Description

Currently on LEDE version: LEDE Reboot 17.01.4 r3560-79f57e422d / LuCI lede-17.01 branch (git-17.290.79498-d3f0685)

There is no Switch feature under LUCI menu Network. In other words, I’d like to create a VLAN tagging from the main router(which already has VLAN Switch capabilities) to be able to have VLAN capabilities for multiple WLAN Virtual Interfaces.

Is it possible to do this for this AP?
thanks

23.05.20181559Base systemBug ReportVery LowHighSystem fails to start up correctly, with 2 dnsmasq/ujai...TrunkUnconfirmed Task Description

I have noticed frequent problems with OpenWrt trunk: about 30% of the time it doesn’t start up correctly (but it seems to boot OK and dmesg messages seem fine), ps shows two dnsmasq/ujail processes (note: I’ve been using ujail for the past 2+ years, without serious problems other than  FS#878 ).

When OpenWrt gets stuck with 2 dnsmasq/ujail processes, invoking logread produces the error: “Failed to find log object: Not found” multiple times. If I kill the ujail/dnsmasq processes OpenWrt will just reboot (!)

I’ve tested this on two different OpenWrt VMs and on two different systems running VBox 5.1 and 5.2 under Ubuntu.

Here is what a ps looks like when the LEDE VM has booted normally:

root@10.0.3.141's password: 


BusyBox v1.28.3 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r6965-9c0ddafd46
 -----------------------------------------------------
root@OpenWrt:~# ps
  PID USER       VSZ STAT COMMAND
    1 root     13384 S    /sbin/procd
    2 root         0 SW   [kthreadd]
    3 root         0 IW   [kworker/0:0]
    4 root         0 IW<  [kworker/0:0H]
    5 root         0 IW   [kworker/u2:0]
    6 root         0 IW<  [mm_percpu_wq]
    7 root         0 SW   [ksoftirqd/0]
    8 root         0 IW   [rcu_sched]
    9 root         0 IW   [rcu_bh]
   10 root         0 SW   [migration/0]
   11 root         0 SW   [cpuhp/0]
   12 root         0 IW<  [netns]
   13 root         0 IW   [kworker/u2:1]
   17 root         0 IW   [kworker/0:1]
   95 root         0 SW   [oom_reaper]
   96 root         0 IW   [kworker/u2:2]
  232 root         0 IW<  [writeback]
  234 root         0 IW<  [crypto]
  235 root         0 IW<  [kintegrityd]
  237 root         0 IW<  [kblockd]
  304 root         0 IW<  [ata_sff]
  325 root         0 IW<  [watchdogd]
  379 root         0 IW   [kworker/u2:3]
  439 root         0 SW   [kswapd0]
  525 root         0 IW<  [pencrypt]
  527 root         0 IW<  [pdecrypt]
  554 root         0 IW<  [acpi_thermal_pm]
  623 root         0 SW   [scsi_eh_0]
  624 root         0 IW<  [scsi_tmf_0]
  627 root         0 SW   [scsi_eh_1]
  638 root         0 IW<  [scsi_tmf_1]
  641 root         0 SW   [scsi_eh_2]
  642 root         0 IW<  [scsi_tmf_2]
  645 root         0 IW<  [ipv6_addrconf]
  646 root         0 IW   [kworker/u2:4]
  724 root         0 IW<  [kworker/0:1H]
  732 root         0 IW<  [ext4-rsv-conver]
  818 root         0 IW<  [ext4-rsv-conver]
  973 root      9012 S    /sbin/ubusd
  978 root      2744 S    /sbin/askfirst /usr/libexec/login.sh
  979 root      3112 S    /bin/ash --login
 1273 root         0 IW<  [cfg80211]
 1512 root      7064 S    /sbin/logd -S 64
 1743 root     15564 S    /sbin/netifd
 1800 root     11260 S    /usr/sbin/odhcpd
 1860 root      2944 S    /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300 -T 3
 2149 root      3108 S    udhcpc -p /var/run/udhcpc-eth1.pid -s /lib/netifd/dhcp.script -f -t 0 -i eth1 -x hostname:OpenWrt -C -O 121
 2162 root      3108 S    udhcpc -p /var/run/udhcpc-eth2.pid -s /lib/netifd/dhcp.script -f -t 0 -i eth2 -x hostname:OpenWrt -C -O 121
 2169 root      3108 S    udhcpc -p /var/run/udhcpc-vlan40.pid -s /lib/netifd/dhcp.script -f -t 0 -i vlan40 -x hostname:OpenWrt -C -O 121
 2172 root      3108 S    udhcpc -p /var/run/udhcpc-vlan50.pid -s /lib/netifd/dhcp.script -f -t 0 -i vlan50 -x hostname:OpenWrt -C -O 121
 2687 root     10032 S    {dnsmasq} /sbin/ujail -n dnsmasq -u -l -r /dev/null -r /dev/urandom -r /etc/TZ -r /etc/dnsmasq.conf -r /etc/ethers -r /etc/group -r /etc/hosts -r /etc/passwd -r /sbin/hotplug-call 
 2700 dnsmasq  13612 S    /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c -k -x /var/run/dnsmasq/dnsmasq.cfg01411c.pid
 2705 root         0 IW   [kworker/0:2]
 2947 root      7092 S    /usr/sbin/softflowd -d -i eth0 -m 8192 -n 10.0.3.100:2055 -p /var/run/softflowd.pid -c /var/run/softflowd.ctl -v 5 -T full -s 100 -p /var/run/softflowd.pid
 2990 root      7908 S    /usr/lib/ipsec/starter --daemon charon --nofork
 3067 root     78176 S    /usr/lib/ipsec/charon
 3121 root      3112 S<   /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 1.gr.pool.ntp.org -p 0.europe.pool.ntp.org -p 2.europe.pool.ntp.org
 3921 root      3256 S    /bin/sh /usr/sbin/mwan3track wan eth1 online 10.0.3.141 8.8.4.4 208.67.222.222
 4500 root      3256 S    /bin/sh /usr/sbin/mwan3track wan2 eth2 online 10.0.3.70 8.8.8.8 208.67.220.220
 4912 root      3060 S    /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300 -T 3
 4917 root      3112 S    sleep 5
 4922 root      3112 S    sleep 5
 4923 root      3112 S    -ash
 4931 root      3108 R    ps
root@OpenWrt:~# uname -a
Linux OpenWrt 4.14.41 #0 SMP Mon May 21 16:07:48 2018 x86_64 GNU/Linux
root@OpenWrt:~# cat /etc/openwrt_*
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='SNAPSHOT'
DISTRIB_REVISION='r6965-9c0ddafd46'
DISTRIB_TARGET='x86/64'
DISTRIB_ARCH='x86_64'
DISTRIB_DESCRIPTION='OpenWrt SNAPSHOT r6965-9c0ddafd46'
DISTRIB_TAINTS=''
r6965-9c0ddafd46
root@OpenWrt:~#

And here is what ps on the same system (same VM, same /etc/config etc) looks like when it fails to work correctly:

  PID USER       VSZ STAT COMMAND
    1 root     13384 S    /sbin/procd
    2 root         0 SW   [kthreadd]
    3 root         0 IW   [kworker/0:0]
    4 root         0 IW<  [kworker/0:0H]
    5 root         0 IW   [kworker/u2:0]
    6 root         0 IW<  [mm_percpu_wq]
    7 root         0 SW   [ksoftirqd/0]
    8 root         0 IW   [rcu_sched]
    9 root         0 IW   [rcu_bh]
   10 root         0 SW   [migration/0]
   11 root         0 SW   [cpuhp/0]
   12 root         0 IW<  [netns]
   13 root         0 IW   [kworker/u2:1]
   29 root         0 IW   [kworker/0:1]
   75 root         0 SW   [oom_reaper]
   76 root         0 IW   [kworker/u2:2]
  232 root         0 IW<  [writeback]
  233 root         0 IW<  [crypto]
  235 root         0 IW<  [kintegrityd]
  236 root         0 IW<  [kblockd]
  238 root         0 IW<  [ata_sff]
  325 root         0 IW<  [watchdogd]
  438 root         0 SW   [kswapd0]
  524 root         0 IW<  [pencrypt]
  526 root         0 IW<  [pdecrypt]
  545 root         0 IW<  [acpi_thermal_pm]
  622 root         0 SW   [scsi_eh_0]
  623 root         0 IW<  [scsi_tmf_0]
  626 root         0 SW   [scsi_eh_1]
  637 root         0 IW<  [scsi_tmf_1]
  640 root         0 SW   [scsi_eh_2]
  641 root         0 IW<  [scsi_tmf_2]
  644 root         0 IW<  [ipv6_addrconf]
  645 root         0 IW   [kworker/u2:3]
  646 root         0 IW   [kworker/u2:4]
  728 root         0 IW<  [kworker/0:1H]
  732 root         0 IW<  [ext4-rsv-conver]
  818 root         0 IW<  [ext4-rsv-conver]
  973 root      9016 S    /sbin/ubusd
  978 root      2744 S    /sbin/askfirst /usr/libexec/login.sh
  979 root      3112 S    /bin/ash --login
 1269 root         0 IW<  [cfg80211]
 1801 root     11328 S    /usr/sbin/odhcpd
 2697 root     10032 S    {dnsmasq} /sbin/ujail -n dnsmasq -u -l -r /dev/null 
 2705 root     10032 R    {dnsmasq} /sbin/ujail -n dnsmasq -u -l -r /dev/null 
 2759 root      3108 R    ps
28.05.20181568Base systemBug ReportVery LowHighD-Link DIR-645 not maintaining WLAN connectionopenwrt-18.06Unconfirmed Task Description

- Device problem occurs on
D-Link DIR-645 Rev. A1

- Software versions of OpenWrt/LEDE release, packages, etc.
LEDE 17.01.4

- Steps to reproduce
Setup the wireless connection. After some time the WLAN connection stops working. A restart is necessary to regain WLAN.

Topic is discussed in the forums:
https://forum.lede-project.org/t/d-link-dir-645-wifi-interface-not-maintaining-connection/6277

I am able and willing to provide log files. But I am new to the business of debugging itself. Help and guidance welcome!

19.06.20181598Base systemBug ReportVery LowHighregression: network performance on IPQ806X (R7800) has ...openwrt-18.06Unconfirmed Task Description

Device problem occurs on: Netgear R7800
oftware versions of OpenWrt/LEDE release: Latest 18.06 branch revision

I’ve run an iperf3 test, I have records of automated tests that I run every 2 hours that show the usual performance is 380Mbps to bouygues.iperf.fr, however on 18.06 the max attainable is just over 60Mbps in a single threaded test. I need to go to at least 10 threads to get close to 380Mbps.

I reverted to stock and a 17.01 build to verify that there was no issue with the internet connection here, and they all showed the old behaviour.

This speed is unnafected by flow offload being off or on.

 
root@router01:~# iperf3 -c bouygues.iperf.fr -p 5207 -R
Connecting to host bouygues.iperf.fr, port 5207
Reverse mode, remote host bouygues.iperf.fr is sending
[  5] local xxx.xxx.xxx.xxx port 45674 connected to 89.84.1.222 port 5207
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  7.45 MBytes  62.5 Mbits/sec
[  5]   1.00-2.00   sec  7.31 MBytes  61.3 Mbits/sec
[  5]   2.00-3.00   sec  7.63 MBytes  64.0 Mbits/sec
[  5]   3.00-4.00   sec  7.64 MBytes  64.1 Mbits/sec
[  5]   4.00-5.00   sec  7.57 MBytes  63.5 Mbits/sec
[  5]   5.00-6.00   sec  7.63 MBytes  64.0 Mbits/sec
[  5]   6.00-7.00   sec  7.47 MBytes  62.6 Mbits/sec
[  5]   7.00-8.00   sec  7.85 MBytes  65.8 Mbits/sec
[  5]   8.00-9.00   sec  7.77 MBytes  65.2 Mbits/sec
[  5]   9.00-10.00  sec  7.86 MBytes  65.9 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  77.7 MBytes  65.2 Mbits/sec    0             sender
[  5]   0.00-10.00  sec  76.2 MBytes  63.9 Mbits/sec                  receiver

iperf Done.


17.07.20181664Base systemBug ReportVery LowHighUnable to use wan port (dhcp or static ip is not workin...AllAssigned Task Description

Device: Belkin F9K1115 v2
Software version: OpenWrt 18.06.0-rc1, LEDE after r3466-f6907dc

Unable to use wan port on any new software version (last known working LEDE version is r3466-f6907dc).
DHCP is not getting ip address. After setting up static ip address there is no network communication.

17.07.20181665Base systemBug ReportVery LowHighNetgear r6100 (ar71xx) does not recognize 5Ghz wlan int...openwrt-18.06New Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Problem occurs on Netgear R6100

Software version 18.06 rc2 (also on rc1)

Steps to reproduce:
1) upgrade to 18.06 rc2
2) log in and check for existence of wlan0 & wlan1 (showing both 2.4 & 5 Ghz wifi interfaces are present). OR in LuCI, check that there is radio0 and radio1

Attaching dmesg and logread from boot of 18.06 rc2

22.07.20181686Base systemBug ReportVery LowHighMir3g random reboot/freezeTrunkUnconfirmed Task Description

Xiaomi Mi Router 3G r7519-1e83f775a3 / LuCI Master (git-18.199.46142-369553c)

i’m using a mir3g and weekly updating to the latest snapshot but from months i still having the same issue random reboots or in some cases, an amber led and what looks a freeze.

here the interesting parts i’ve found using /etc/syslog for logging (to avoid losing the log each reboot) when the reboots come up:

Fri Jul 20 05:36:04 2018 kern.alert kernel: [42728.145661] CPU 3 Unable to handle kernel paging request at virtual address 0000802f, epc == 8e9b1ae0, ra == 8e9b1994
Fri Jul 20 05:36:04 2018 kern.warn kernel: [42728.156261] Oops[#1]:
                                                                                                                  Fri Jul 20 05:36:07 2018 user.notice dnsmasq: DNS rebinding

...

Sat Jul 21 01:37:35 2018 kern.alert kernel: [72076.004853] CPU 1 Unable to handle kernel paging request at virtual address 07402008, epc == 80118aa0, ra == 8011a1f4
Sat Jul 21 01:37:35 2018 kern.warn kernel: [72076.015740] Oops[#1]:
Sat Jul 21 01:37:35 2018 kern.warn kernel: [72076.018010] CPU: 1 PID: 18600 Comm: nslookup Not tainted 4.14.54 #0
Sat Jul 21 01:37:38 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!

...

Sun Jul 22 04:30:12 2018 kern.alert kernel: [96742.276696] CPU 0 Unable to handle kernel paging request at virtual address 0000802f, epc == 8e991ae0, ra == 8e991994
Sun Jul 22 04:30:12 2018 kern.warn kernel: [96742.287301] Oops[#1]:
Sun Jul 22 04:30:15 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!

any guess to whats happening? i just have a faulty unit?

14.08.20181778Base systemBug ReportVery LowHighrelease 18.06 does not work for recent RouterBoard 450G...openwrt-18.06Unconfirmed Task Description

OpenWrt 18.06. does not work on at least some RB45Gs, because the yaffs2-Image for the kernel in

openwrt-18.06.0-ar71xx-mikrotik-nand-large-squashfs-sysupgrade.bin

seems to be created with a pagesize of 2048, but my recent RB450G contains a NAND-Chip with a pagesize of 4096 (as displayed by the linux-kernel). Flashing this image onto this chip with “nandwrite -o”, inside function platform_nand_pre_upgrade() in file target/linux/ar71xx/base-files/lib/upgrade/platform.sh, screws up oop-data and renders the kernel-nand-partition unbootable, unreadable, unwritable and even unerasable (at least with “mtd erase”).

See attached File cap1.txt for an installation log. The Installation seemed to work just fine, but the device did not bool any more.
See attached File cap2.txt for a log of a netboot-session after that. The kernel showed up 6 new “Bad eraseblock”s and “mtd erase” did not work any more.
After restoring Mikrotik’s RouterOS to the device with their NetInstall-Application, the “bad eraseblock”s were gone, which prooves, that the NAND-Chip is not really defective and the “Bad eraseblock” are erroneous.

There seem to be RouterBoards with different NAND-Chips around: This page:

https://wikidevi.com/wiki/MikroTik_RouterBOARD_450G_%28RB450G%29

states that it is a “Hynix HY27UT084G2A”, but the Linux-Kernel states that
the Chip is from Toshiba. Hence the sysupgrade-procedure should probably prepared
for different yaffs2-page-sizes.

Workaround:

After quite some time, I figures out the following workaround:

  1. Netboot OpenWrt 18-06.
  2. Open the file /lib/upgrade/platform.sh with vi and comment out the nandwrite-call in line 760.
  3. Call sysupgrade as usual –> The Installation will not be bootable, but the kernel-Partition will still be accessable
  4. Netboot OpenWrt 14.07 (because v18.06 lacks yaffs2-kernel-support !)
  5. Manually install the kernel-file with:
mtd erase /dev/mtd5
mkdir /mnt/kernel
mount -t yaffs2 /dev/mtdblock5 /mnt/kernel
cd /mnt/kernel
wget -O kernel http://192.168.88.1:8080/openwrt-18.06.0-ar71xx-mikrotik-vmlinux-lzma.elf
chmod +x kernel
cd /
sync
umount /mnt/kernel

With this procedure I got a working installation.

16.08.20181787Base systemBug ReportVery LowHighiw doesn't support wep with ibss adhocTrunkUnconfirmed Task Description

VoCore2 / OpenWrt SNAPSHOT, r7866-8c91807

Works:

# iw phy phy0 interface add f00 type ibss
# ip link set up f00
# iw dev f00 ibss join foobar 2412
root@tolppaB8D812x67_27402:~# iwinfo f00 info
f00 ESSID: “foobar”

        Access Point: B8:D8:12:67:6B:0A
        Mode: Ad-Hoc  Channel: 1 (2.412 GHz)
        Tx-Power: 0 dBm  Link Quality: unknown/70
        Signal: unknown  Noise: unknown
        Bit Rate: unknown
        Encryption: unknown
        Type: nl80211  HW Mode(s): 802.11bgn
        Hardware: unknown [Generic MAC80211]
        TX power offset: unknown
        Frequency offset: unknown
        Supports VAPs: yes  PHY name: phy0

Does NOT work:

# iw dev f00 ibss join foobar 2412 key d:0:42325d294a
Usage: iw [options] dev <devname> ibss join <SSID> <freq in MHz> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>] [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]

Join the IBSS cell with the given SSID, if it doesn’t exist create
it on the given frequency. When fixed frequency is requested, don’t
join/create a cell on a different frequency. When a fixed BSSID is
requested use that BSSID and do not adopt another cell’s BSSID even
if it has higher TSF and the same SSID. If an IBSS is created, create
it with the specified basic-rates, multicast-rate and beacon-interval.

Options:

  1. -debug enable netlink debugging
23.08.20181806Base systemBug ReportVery LowHighafter rebooting with a device connect, that port doesn'...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Device: Linksys E1700
Running: Trunk, but also tested positive with 17.01

After rebooting the E1700 router, that has a device connected, whos network card has enery saving activated, the link of the port, that the device is connected to, does not come up.

Tested with a Dell laptop with a Realtek PCIe GBE Familiy Controller, the driver options that needed to be deactivated were “Energy Efficient Ethernet” and “Green Ethernet”.
But the problem also happened with various thin clients and printers.

The log or dmesg does not show anything regarding this.


25.08.20181816Base systemBug ReportVery LowHigh D-Link DWR-921 C3’s WWAN connection/LTE modem hangs/st...openwrt-18.06Unconfirmed Task Description

Internet connection stops working, pinging 8.8.8.8 directly from router doesn’t work. It seems to happen most often after 2 days since booting, but I’m pretty sure it had happened very soon after restarting too (restart was done because of this exact problem). Before it happens, everything works perfectly. Nothing like this happens on stock D-Link firmware.

logread output: attached
dmesg output: attached
Both done after I noticed internet is down in the morning, it had to go down at night.

Steps to reproduce:
flash OpenWrt 18.06.0 r7188-b0b5c64c22 / LuCI openwrt-18.06 branch (git-18.210.69179-6df9a57) factory image on DWR-921 C3
configure it the following way (this is exactly all the configuration that was done on the device prior to flashing openwrt):

passwd
uci set network.wwan=interface
uci set network.wwan.proto='qmi'
uci set network.wwan.device='/dev/cdc-wdm0'
uci set network.wwan.apn='internet'
uci set network.wwan.modes='lte'
uci commit network
uci set firewall.@zone[1].network='wan wwan wan6'
uci commit firewall
ifup wwan
opkg update
opkg install luci-proto-qmi
/etc/init.d/uhttpd restart
reboot

wait (2 days should be enough, but no warranties)

My attempts at working around the problem:
ifdown wwan and ifup wwan don’t help, same with restarting wwan in luci, output of uqmi -d /dev/cdc-wdm0 –get-data-status is “disconnected”. uqmi -d /dev/cdc-wdm0 –start-network doesn’t help.

I also tried playing with lte_modem_enable gpio. I’ll try this when the bug materializes again.
internet works ok
I do echo “0” > /sys/class/gpio/lte_modem_enable/value
then echo “1” > /sys/class/gpio/lte_modem_enable/value
internet doesn’t work
logread output:

Fri Aug 24 19:57:21 2018 kern.info kernel: [ 1133.343003] usb 1-1: USB disconnect, device number 2
Fri Aug 24 19:57:21 2018 kern.info kernel: [ 1133.357143] qmi_wwan 1-1:1.4 wwan0: unregister 'qmi_wwan' usb-101c0000.ehci-1, WWAN/QMI device
Fri Aug 24 19:57:21 2018 daemon.notice netifd: Network device 'wwan0' link is down
Fri Aug 24 19:57:21 2018 daemon.notice netifd: Network alias 'wwan0' link is down
Fri Aug 24 19:57:21 2018 daemon.notice netifd: Interface 'wwan_4' has link connectivity loss
Fri Aug 24 19:57:21 2018 daemon.notice netifd: Interface 'wwan_4' is disabled
Fri Aug 24 19:57:21 2018 daemon.notice netifd: wwan_4 (1378): udhcpc: SIOCGIFINDEX: No such device
Fri Aug 24 19:57:21 2018 daemon.notice netifd: wwan_4 (1378): udhcpc: SIOCGIFINDEX: No such device
Fri Aug 24 19:59:02 2018 kern.info kernel: [ 1179.698888] usb 1-1: new high-speed USB device number 3 using ehci-platform
Fri Aug 24 19:59:02 2018 kern.info kernel: [ 1179.846894] qmi_wwan 1-1:1.4: cdc-wdm0: USB WDM device
Fri Aug 24 19:59:02 2018 daemon.notice netifd: Interface 'wwan_4' is enabled
Fri Aug 24 19:59:02 2018 kern.info kernel: [ 1179.912948] qmi_wwan 1-1:1.4 wwan0: register 'qmi_wwan' at usb-101c0000.ehci-1, WWAN/QMI device, mac

ifup wwan, ifdown wwan and ifup wwan

Fri Aug 24 20:01:29 2018 daemon.notice netifd: Interface 'wwan_4' is disabled
Fri Aug 24 20:01:29 2018 daemon.notice netifd: wwan (2431): Stopping network wwan
Fri Aug 24 20:01:34 2018 daemon.notice netifd: Interface 'wwan' is now down
Fri Aug 24 20:01:34 2018 daemon.notice netifd: Interface 'wwan' is setting up now
Fri Aug 24 20:01:52 2018 daemon.notice netifd: wwan (2542): Stopping network wwan
Fri Aug 24 20:01:52 2018 daemon.notice netifd: wwan (2542): Command failed: Permission denied
Fri Aug 24 20:01:52 2018 daemon.notice netifd: Interface 'wwan' is now down
Fri Aug 24 20:01:52 2018 daemon.notice netifd: Interface 'wwan' is setting up now

ifup wwan

Fri Aug 24 20:03:17 2018 daemon.notice netifd: wwan (2765): Stopping network wwan
Fri Aug 24 20:03:17 2018 daemon.notice netifd: wwan (2765): Command failed: Permission denied
Fri Aug 24 20:03:17 2018 daemon.notice netifd: Interface 'wwan' is now down
Fri Aug 24 20:03:17 2018 daemon.notice netifd: Interface 'wwan' is setting up now

ifdown wwan

Fri Aug 24 20:04:06 2018 daemon.notice netifd: wwan (2850): Stopping network wwan
Fri Aug 24 20:04:06 2018 daemon.notice netifd: wwan (2850): Command failed: Permission denied
Fri Aug 24 20:04:06 2018 daemon.notice netifd: Interface 'wwan' is now down

ifup wwan

Fri Aug 24 20:04:22 2018 daemon.notice netifd: Interface 'wwan' is setting up now

few minutes later ifstatus wwan

{
    "up": false,
    "pending": true,
    "available": true,
    "autostart": true,
    "dynamic": false,
    "proto": "qmi",
    "data": {
       
    }
}

stopped wwan in luci

Fri Aug 24 20:08:23 2018 daemon.notice netifd: wwan (3540): Stopping network wwan
Fri Aug 24 20:08:23 2018 daemon.notice netifd: wwan (3540): Command failed: Permission denied
Fri Aug 24 20:08:23 2018 daemon.notice netifd: Interface 'wwan' is now down

started wwan in luci

Fri Aug 24 20:08:53 2018 daemon.notice netifd: Interface 'wwan' is setting up now
Fri Aug 24 20:08:54 2018 daemon.notice netifd: wwan (3631): "No effect"
Fri Aug 24 20:08:54 2018 daemon.notice netifd: wwan (3631): "Failed to connect to service"

internet still not working, I reboot and it works.

27.08.20181820Base systemBug ReportVery LowHigh18.06.0 release not working on Mercury MAC1200R v1 (ar7...openwrt-18.06Unconfirmed Task Description

I’m using TTL to flash in openwrt 18.06 via method on its wiki page, but it fail to boot. Log:

[    2.359088] squashfs: SQUASHFS error: unable to read id index table
[    2.365735] List of all partitions:
[    2.369291] 1f00             128 mtdblock0 [    2.373384]  (driver?)
[    2.375789] 1f01            1335 mtdblock1 [    2.379845]  (driver?)
[    2.382260] 1f02            6665 mtdblock2 [    2.386322]  (driver?)
[    2.388723] 1f03            4096 mtdblock3 [    2.392795]  (driver?)
[    2.395191] 1f04              64 mtdblock4 [    2.399250]  (driver?)
[    2.401663] 1f05            8000 mtdblock5 [    2.405726]  (driver?)
[    2.408120] No filesystem could mount root, tried: [    2.412894]  squashfs
[    2.415195]
[    2.416717] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)
[    2.426288] Rebooting in 1 seconds..

Then I flash back to 17.01.5 and it recovers. I also attached complete bootlog of both versions FYI.

31.08.20181827Base systemBug ReportVery LowHighwhy has uci no package which depends on?AllUnconfirmed Task Description

Hi,
today I did a bad thing, which only could happen, because uci have no package which depends on: I uninstalled which my currently developed clean script uci package and after reboot the router doesnt came up again :D

But why is this main package no refereed anywhere?

Regards,
Thomas

02.09.20181829Base systemBug ReportVery LowHighERROR 'eth0: tx ring full' on BT Home Hub 2BAllUnconfirmed Task Description

Device: BT Home Hub 2B
Software: OpenWrt 18.06.X / LEDE 17.01.X

Never had error ‘eth0: tx ring full’ in Chaos Calmer and Barrier Breaker but now after fresh update my logs are full with error ‘eth0: tx ring full’

AFAIK Looks like driver issue:
Tx ring full errors with HH5a and it was an ethernet driver issue or something at the time when LEDE on HH5a wasn’t fully compatible with SMP.
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=2270fc5947a3cc3b7595ed22468425a4b10ebc30

Kernel Log:

[    0.000000] Linux version 4.4.92 (buildbot@debian8) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3556-46e29bd) ) #0 Mon Oct 16 15:21:43 2017
[    0.000000] SoC: Danube rev 1.5
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019641 (MIPS 24KEc)
[    0.000000] MIPS: machine is BTHOMEHUBV2B - BT Home Hub 2B
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 804704b0, node_mem_map 81007da0
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyLTQ0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00072538
[    0.000000] Readback ErrCtl register=00072538
[    0.000000] Memory: 58788K/65536K available (3884K kernel code, 156K rwdata, 620K rodata, 1212K init, 200K bss, 6748K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 333MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
[    0.000017] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
[    0.007955] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
[    0.050591] pid_max: default: 32768 minimum: 301
[    0.055565] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.062117] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.078972] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.088665] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.094920] pinctrl core: initialized pinctrl subsystem
[    0.102308] NET: Registered protocol family 16
[    0.115040] pinctrl-xway 1e100b10.pinmux: Init done
[    0.121547] dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels: 20
[    0.182342] Can't analyze schedule() prologue at 80009078
[    0.204445] PCI host bridge /fpi@10000000/pci@E105400 ranges:
[    0.210131]  MEM 0x0000000018000000..0x0000000019ffffff
[    0.215421]   IO 0x000000001ae00000..0x000000001affffff
[    0.247772] gpio-stp-xway 1e100bb0.stp: Init done
[    0.253699] usbcore: registered new interface driver usbfs
[    0.259334] usbcore: registered new interface driver hub
[    0.264760] usbcore: registered new device driver usb
[    0.270367] PCI host bridge to bus 0000:00
[    0.274424] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
[    0.281356] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
[    0.288293] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.295145] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.303231] pci 0000:00:0e.0: [168c:ff1d] type 00 class 0x020000
[    0.303324] pci 0000:00:0e.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[    0.303913] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.303989] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[    0.312148] clocksource: Switched to clocksource MIPS
[    0.319606] NET: Registered protocol family 2
[    0.325739] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.332707] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.339089] TCP: Hash tables configured (established 1024 bind 1024)
[    0.345673] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.351495] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.358186] NET: Registered protocol family 1
[    0.362627] PCI: CLS 0 bytes, default 32
[    0.376005] gptu: totally 6 16-bit timers/counters
[    0.380968] gptu: misc_register on minor 63
[    0.385105] gptu: succeeded to request irq 126
[    0.389607] gptu: succeeded to request irq 127
[    0.394120] gptu: succeeded to request irq 128
[    0.398634] gptu: succeeded to request irq 129
[    0.403148] gptu: succeeded to request irq 130
[    0.407662] gptu: succeeded to request irq 131
[    0.418932] lantiq,vmmc 1f103000.vmmc: requested GPIO 511
[    0.424282] lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x03a00000
[    0.432018] Crashlog allocated RAM at address 0x3f00000
[    0.476416] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.482185] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.499017] io scheduler noop registered
[    0.502883] io scheduler deadline registered (default)
[    0.509281] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[    0.518249] console [ttyLTQ0] enabled
[    0.525357] bootconsole [early0] disabled
[    0.534622] lantiq nor flash device: 00080000 at 10000000
[    0.538954] Found: AMD AM29LV400BB
[    0.541851] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank
[    0.547510] number of JEDEC chips: 1
[    0.551021] 5 ofpart partitions found on MTD device ltq_nor
[    0.556369] Creating 5 MTD partitions on "ltq_nor":
[    0.561103] 0x000000000000-0x000000040000 : "uboot"
[    0.572457] 0x000000040000-0x000000050000 : "uboot_env"
[    0.579853] 0x000000050000-0x000000060000 : "rg_conf_1"
[    0.587361] 0x000000060000-0x000000070000 : "rg_conf_2"
[    0.594878] 0x000000070000-0x000000080000 : "rg_conf_factory"
[    0.604299] nand: device found, Manufacturer ID: 0xec, Chip ID: 0x75
[    0.609065] nand: Samsung NAND 32MiB 3,3V 8-bit
[    0.613461] nand: 32 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[    0.620663] Scanning device for bad blocks
[    0.720375] 3 ofpart partitions found on MTD device 14000000.nand-parts
[    0.725486] Creating 3 MTD partitions on "14000000.nand-parts":
[    0.731235] 0x000000000000-0x000000004000 : "art"
[    0.739803] 0x000000004000-0x000000204000 : "kernel"
[    0.747145] 0x000000204000-0x000002000000 : "ubi"
[    0.812043] libphy: ltq_mii: probed
[    0.814549] adm6996: eth0: ADM6996M model PHY found.
[    0.822800] eth0: attached PHY [Infineon ADM6996] (phy_addr=1e180000.etop-ff:00, irq=-1)
[    0.831375] wdt 1f8803f0.watchdog: Init done
[    0.840503] NET: Registered protocol family 10
[    0.856664] NET: Registered protocol family 17
[    0.859717] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.871917] 8021q: 802.1Q VLAN Support v1.8
[    0.883843] UBI: auto-attach mtd7
[    0.885598] ubi0: attaching mtd7
[    1.336604] ubi0: scanning is finished
[    1.361954] ubi0: attached mtd7 (name "ubi", size 29 MiB)
[    1.365889] ubi0: PEB size: 16384 bytes (16 KiB), LEB size: 15872 bytes
[    1.372293] ubi0: min./max. I/O unit sizes: 512/512, sub-page size 256
[    1.378627] ubi0: VID header offset: 256 (aligned 256), data offset: 512
[    1.385133] ubi0: good PEBs: 1919, bad PEBs: 0, corrupted PEBs: 0
[    1.391045] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 92
[    1.397979] ubi0: max/mean erase counter: 51/38, WL threshold: 4096, image sequence number: 568085886
[    1.406930] ubi0: available PEBs: 0, total reserved PEBs: 1919, PEBs reserved for bad PEB handling: 40
[    1.416993] ubi0: background thread "ubi_bgt0d" started, PID 370
[    1.432449] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 372
[    1.446277] UBIFS (ubi0:0): recovery needed
[    1.503907] UBIFS (ubi0:0): recovery completed
[    1.507083] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.514096] UBIFS (ubi0:0): LEB size: 15872 bytes (15 KiB), min./max. I/O unit sizes: 512 bytes/512 bytes
[    1.523377] UBIFS (ubi0:0): FS size: 29474304 bytes (28 MiB, 1857 LEBs), journal size 4031488 bytes (3 MiB, 254 LEBs)
[    1.533674] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[    1.539350] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 826B888B-9DA3-431E-9A6B-20C249A26A8E, small LPT model
[    1.551985] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    1.564257] Freeing unused kernel memory: 1212K
[    1.867673] init: Console is alive
[    1.870177] init: - watchdog -
[    2.421913] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.819449] SCSI subsystem initialized
[    3.732545] dwc2 1e101000.ifxhcd: DWC OTG Controller
[    3.736063] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
[    3.743224] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[    3.750773] hub 1-0:1.0: USB hub found
[    3.753929] hub 1-0:1.0: 1 port detected
[    3.780073] usbcore: registered new interface driver usb-storage
[    3.785942] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.799938] init: - preinit -
[    3.956660] dwc2 1e101000.ifxhcd: Mode Mismatch Interrupt: currently in Host mode
[    3.962665] dwc2 1e101000.ifxhcd: Mode Mismatch Interrupt: currently in Host mode
[    4.152328] usb 1-1: new high-speed USB device number 2 using dwc2
[    4.157465] dwc2 1e101000.ifxhcd: Mode Mismatch Interrupt: currently in Host mode
[    4.164318] dwc2 1e101000.ifxhcd: Mode Mismatch Interrupt: currently in Host mode
[    4.284665] random: procd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[    4.374437] usb-storage 1-1:1.0: USB Mass Storage device detected
[    4.393897] scsi host0: usb-storage 1-1:1.0
[    5.581867] scsi 0:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
[    5.593162] sd 0:0:0:0: [sda] 7907328 512-byte logical blocks: (4.05 GB/3.77 GiB)
[    5.601593] sd 0:0:0:0: [sda] Write Protect is off
[    5.604986] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    5.605816] sd 0:0:0:0: [sda] No Caching mode page found
[    5.610108] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    5.622842]  sda: sda1 sda2
[    5.630553] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    7.527028] mount_root: mounting /dev/root
[    7.539146] mount_root: loading kmods from internal overlay
[    7.617329] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    7.631272] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    7.949318] block: attempting to load /etc/config/fstab
[    7.963471] block: extroot: not configured
[    7.974180] urandom-seed: Seeding with /etc/urandom.seed
[    8.048661] procd: - early -
[    8.052712] procd: - watchdog -
[    8.722006] procd: - watchdog -
[    8.724598] procd: - ubus -
[    8.823854] random: ubusd: uninitialized urandom read (4 bytes read, 99 bits of entropy available)
[    8.915088] random: ubusd: uninitialized urandom read (4 bytes read, 104 bits of entropy available)
[    8.924917] random: ubusd: uninitialized urandom read (4 bytes read, 104 bits of entropy available)
[    8.934829] random: ubusd: uninitialized urandom read (4 bytes read, 104 bits of entropy available)
[    8.948583] random: ubusd: uninitialized urandom read (4 bytes read, 105 bits of entropy available)
[    8.956929] random: ubusd: uninitialized urandom read (4 bytes read, 106 bits of entropy available)
[    8.970312] random: ubusd: uninitialized urandom read (4 bytes read, 106 bits of entropy available)
[    8.982395] random: ubusd: uninitialized urandom read (4 bytes read, 107 bits of entropy available)
[    8.992604] procd: - init -
[    9.112780] random: nonblocking pool is initialized
[    9.697524] EXT4-fs (sda1): recovery complete
[    9.708266] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
[    9.869733] Adding 131068k swap on /dev/sda2.  Priority:-1 extents:1 across:131068k 
[   10.649637] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.705291] NET: Registered protocol family 8
[   10.708230] NET: Registered protocol family 20
[   10.766653] PPP generic driver version 2.4.2
[   10.800662] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.836600] Netfilter messages via NETLINK v0.30.
[   10.867047] ip_set: protocol 6
[   11.102095] IFX MEI Version 5.00.00
[   11.164986] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
[   11.193819] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[   11.200308] Backport generated by backports.git backports-20160324-13-g24da7d3c
[   11.215403] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.241502] ATM1.0.26    ATM (A1) firmware version 0.17
[   11.245278] ifxmips_atm: ATM init succeed
[   11.273765] Infineon Technologies DEU driver version 2.0.0 
[   11.277881] Danube Chip ver. 1.4 detected. 
[   11.304814] IFX DEU DES initialized (multiblock).
[   11.316430] IFX DEU AES initialized (multiblock).
[   11.320088] IFX DEU SHA1 initialized.
[   11.328559] IFX DEU MD5 initialized.
[   11.403678] nf_conntrack version 0.5.0 (937 buckets, 3748 max)
[   11.473797] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[   11.482245] owl-loader 0000:00:0e.0: fixup device configuration
[   11.488672] pci 0000:00:0e.0: [168c:0027] type 00 class 0x028000
[   11.488769] pci 0000:00:0e.0: reg 0x10: [mem 0x18000000-0x1800ffff]
[   11.488914] pci 0000:00:0e.0: PME# supported from D0 D3hot
[   11.489471] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[   11.508762] NET: Registered protocol family 24
[   11.571400] xt_time: kernel timezone is -0000
[   12.299381] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[   12.311148] ath: phy0: eeprom contains invalid mac address: 00:00:00:00:00:00
[   12.316847] ath: phy0: random mac address will be used: 46:96:39:84:34:8f
[   12.325201] ath: EEPROM regdomain: 0x37
[   12.325234] ath: EEPROM indicates we should expect a direct regpair map
[   12.325259] ath: Country alpha2 being used: AW
[   12.325280] ath: Regpair used: 0x37
[   12.337914] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.346954] ieee80211 phy0: Atheros AR9160 MAC/BB Rev:1 AR2133 RF Rev:b0 mem=0xb8000000, irq=30
[   12.408872] kmodloader: done loading kernel modules from /etc/modules.d/*
[   21.036879] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.055493] device eth0 entered promiscuous mode
[   21.072987] device eth0.1 entered promiscuous mode
[   21.087893] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   21.195851] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   22.397238] ath: EEPROM regdomain: 0x8348
[   22.397275] ath: EEPROM indicates we should expect a country code
[   22.397303] ath: doing EEPROM country->regdmn map search
[   22.397330] ath: country maps to regdmn code: 0x3a
[   22.397353] ath: Country alpha2 being used: US
[   22.397374] ath: Regpair used: 0x3a
[   22.397400] ath: regdomain 0x8348 dynamically updated by user
[   22.820387] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.836380] br-lan: port 1(eth0.1) entered forwarding state
[   22.840598] br-lan: port 1(eth0.1) entered forwarding state
[   22.846334] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   22.900283] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   24.844967] br-lan: port 1(eth0.1) entered forwarding state
[   25.327990] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.397359] device wlan0 entered promiscuous mode
[   28.242596] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   28.247775] br-lan: port 2(wlan0) entered forwarding state
[   28.252884] br-lan: port 2(wlan0) entered forwarding state
[   30.330900] br-lan: port 2(wlan0) entered forwarding state
[   32.691560] device wlan0.sta1 entered promiscuous mode
[   32.720871] br-lan: port 3(wlan0.sta1) entered forwarding state
[   32.725417] br-lan: port 3(wlan0.sta1) entered forwarding state
[   34.728242] br-lan: port 3(wlan0.sta1) entered forwarding state
[   39.668604] IPv6: ADDRCONF(NETDEV_UP): nas0: link is not ready
[   63.980800] [DSL_BSP_Showtime 894]: Datarate US intl = 1092666, fast = 0
[   63.986100] enter showtime, cell rate: 0 - 2577, 1 - 2577, xdata addr: 0x82be0000
[   63.993605] IPv6: ADDRCONF(NETDEV_CHANGE): nas0: link becomes ready
[   64.997268] eth0: tx ring full
[   65.968358] pppoe-wan: renamed from ppp0
[ 1751.047399] eth0: tx ring full
[ 1902.521176] eth0: tx ring full
[ 2143.258160] eth0: tx ring full
[ 2146.518662] eth0: tx ring full
[ 2223.428482] eth0: tx ring full
[ 2239.888722] eth0: tx ring full
[ 2243.247973] eth0: tx ring full
[ 2245.054283] eth0: tx ring full
[ 2246.288345] eth0: tx ring full
[ 2249.611091] eth0: tx ring full
[ 2250.455924] eth0: tx ring full
[ 2250.588518] eth0: tx ring full
[ 2258.861419] eth0: tx ring full
[ 2269.827816] eth0: tx ring full
[ 2272.862209] eth0: tx ring full
[ 2425.515514] eth0: tx ring full
[ 2516.783749] eth0: tx ring full
[ 2519.607658] eth0: tx ring full
[ 2601.461745] eth0: tx ring full
[ 2627.816628] eth0: tx ring full
[ 2627.864844] eth0: tx ring full
[ 2673.692438] eth0: tx ring full
[ 2673.762416] eth0: tx ring full
[ 2673.965346] eth0: tx ring full
[ 2674.499868] eth0: tx ring full
[ 2705.647434] eth0: tx ring full
[ 2708.611170] eth0: tx ring full
[ 2723.844603] eth0: tx ring full
[ 2807.813737] eth0: tx ring full
[ 2808.729392] eth0: tx ring full
[ 2816.697257] eth0: tx ring full
[ 2817.261323] eth0: tx ring full
[ 6328.327726] eth0: tx ring full
[ 6328.392700] eth0: tx ring full
[ 6328.861733] eth0: tx ring full
[15735.570622] eth0: tx ring full
[15738.884784] eth0: tx ring full
[15807.460162] eth0: tx ring full
[15808.438141] eth0: tx ring full
[15811.414092] eth0: tx ring full
[15896.230719] eth0: tx ring full
[15898.720603] eth0: tx ring full
[15898.882255] eth0: tx ring full
[15898.970973] eth0: tx ring full
[15899.126641] eth0: tx ring full
[15901.567257] eth0: tx ring full
[15984.121757] eth0: tx ring full
[19100.498356] eth0: tx ring full
[19100.951005] eth0: tx ring full
[19106.852503] eth0: tx ring full
[19116.416185] eth0: tx ring full
[19158.015643] eth0: tx ring full
[19766.978194] eth0: tx ring full
[19767.148348] eth0: tx ring full
[19767.463950] eth0: tx ring full
[19767.699791] eth0: tx ring full
[19769.093434] eth0: tx ring full
[19872.692062] eth0: tx ring full
[19954.218597] eth0: tx ring full
[20011.519744] eth0: tx ring full
[20012.013685] eth0: tx ring full
[20303.519192] eth0: tx ring full
[20303.570231] eth0: tx ring full
[20303.652010] eth0: tx ring full
[20303.971342] eth0: tx ring full
[20304.749457] eth0: tx ring full
[20305.500198] eth0: tx ring full
[20385.854344] eth0: tx ring full
[20385.905612] eth0: tx ring full
[20385.945290] eth0: tx ring full
[20385.990692] eth0: tx ring full
[20386.075070] eth0: tx ring full
[20392.962606] eth0: tx ring full
[22038.952618] eth0: tx ring full
[22039.499593] eth0: tx ring full
[22040.007869] eth0: tx ring full
[22040.189527] eth0: tx ring full
[22040.574095] eth0: tx ring full
[22040.612443] eth0: tx ring full
[22040.926333] eth0: tx ring full
[22659.864758] eth0: tx ring full
[22660.495852] eth0: tx ring full
[23257.228391] eth0: tx ring full
[23257.455571] eth0: tx ring full
[23257.603409] eth0: tx ring full
[23257.858200] eth0: tx ring full
[23258.046592] eth0: tx ring full
[25625.135877] eth0: tx ring full
[27730.082270] eth0: tx ring full
[27947.034117] eth0: tx ring full
[28025.635456] eth0: tx ring full
[28029.978561] eth0: tx ring full
[28112.744005] eth0: tx ring full
[28165.999901] eth0: tx ring full
[28166.173177] eth0: tx ring full
[28441.978538] eth0: tx ring full
[30040.128186] eth0: tx ring full
[30043.621253] eth0: tx ring full
[30045.811829] eth0: tx ring full
[30047.869733] eth0: tx ring full
[30103.293326] eth0: tx ring full
[30197.794092] eth0: tx ring full
[30199.050076] eth0: tx ring full
[30199.087910] eth0: tx ring full
[30199.423788] eth0: tx ring full
[34320.258818] eth0: tx ring full
[34320.377395] eth0: tx ring full
[34421.763795] eth0: tx ring full
[34422.045893] eth0: tx ring full
[34500.449922] eth0: tx ring full
[34500.841984] eth0: tx ring full
[34501.007997] eth0: tx ring full
[34707.465573] eth0: tx ring full
[34757.853116] eth0: tx ring full
[34758.050283] eth0: tx ring full
[34784.592386] eth0: tx ring full
[35146.884188] eth0: tx ring full
[35146.981132] eth0: tx ring full
[35146.988358] eth0: tx ring full
[35146.999077] eth0: tx ring full
[35150.009918] eth0: tx ring full
[36428.384476] eth0: tx ring full
[36428.621859] eth0: tx ring full
[38141.261431] eth0: tx ring full
[42949.938947] eth0: tx ring full
[42950.774024] eth0: tx ring full
[42950.876050] eth0: tx ring full
[42950.943942] eth0: tx ring full
[42951.016924] eth0: tx ring full
[42951.366590] eth0: tx ring full
[42951.465679] eth0: tx ring full
[42951.597091] eth0: tx ring full
[42951.664815] eth0: tx ring full
[42952.438956] eth0: tx ring full
[42952.516928] eth0: tx ring full
[42952.677737] eth0: tx ring full
[42952.726861] eth0: tx ring full
[42952.777372] eth0: tx ring full
[42952.828522] eth0: tx ring full
[42952.910972] eth0: tx ring full
[42952.966874] eth0: tx ring full
[42953.043049] eth0: tx ring full
[42953.086207] eth0: tx ring full
[42953.161355] eth0: tx ring full
[42953.204563] eth0: tx ring full
[42953.283231] eth0: tx ring full
[42953.366556] eth0: tx ring full
[42953.412652] eth0: tx ring full
[42953.458071] eth0: tx ring full
[42959.640264] eth0: tx ring full
[42960.281323] eth0: tx ring full
[42960.367638] eth0: tx ring full
[42960.419640] eth0: tx ring full
[42960.472884] eth0: tx ring full
[42960.514275] eth0: tx ring full
[42964.767985] eth0: tx ring full
[42964.881546] eth0: tx ring full
[43931.097063] pppoe-wan: renamed from ppp0
[43932.265643] eth0: tx ring full
[43932.320769] eth0: tx ring full
[43932.646469] eth0: tx ring full
[43935.744613] eth0: tx ring full
[43936.857861] eth0: tx ring full
[43938.431392] eth0: tx ring full
[43939.592561] eth0: tx ring full
[43944.827019] eth0: tx ring full
[43945.171647] eth0: tx ring full
[43951.549923] eth0: tx ring full
[43959.589918] eth0: tx ring full
[43959.655578] eth0: tx ring full
[43970.269586] eth0: tx ring full
[43987.025093] eth0: tx ring full
[43987.084833] eth0: tx ring full
[43987.159852] eth0: tx ring full
[44000.843294] eth0: tx ring full
[44000.903274] eth0: tx ring full
[44001.027860] eth0: tx ring full
[44028.851443] eth0: tx ring full
[44030.381791] eth0: tx ring full
[44030.440126] eth0: tx ring full
[44030.592628] eth0: tx ring full
[44036.931336] eth0: tx ring full
[44038.468842] eth0: tx ring full
[44038.504444] eth0: tx ring full
[44053.817125] eth0: tx ring full
[44057.927477] eth0: tx ring full
[44058.029306] eth0: tx ring full
[44060.524705] eth0: tx ring full
[44060.564667] eth0: tx ring full
[44060.686983] eth0: tx ring full
[44060.889996] eth0: tx ring full
[44061.908728] eth0: tx ring full
[44062.137966] eth0: tx ring full
[44063.344457] eth0: tx ring full
[44065.908146] eth0: tx ring full
[44068.721678] eth0: tx ring full
[44069.998352] eth0: tx ring full
[44074.904293] eth0: tx ring full
[44076.275575] eth0: tx ring full
[44078.774601] eth0: tx ring full
[44079.733673] eth0: tx ring full
[44079.881001] eth0: tx ring full
[44079.936465] eth0: tx ring full
[44080.897424] eth0: tx ring full
[44081.065809] eth0: tx ring full
[44082.301993] eth0: tx ring full
[44083.516338] eth0: tx ring full
[44083.584709] eth0: tx ring full
[44090.647089] eth0: tx ring full
[44113.244090] eth0: tx ring full
[44115.043025] eth0: tx ring full
[44118.121896] eth0: tx ring full
[44118.173463] eth0: tx ring full
[44119.031389] eth0: tx ring full
[44119.187683] eth0: tx ring full
[44119.249342] eth0: tx ring full
[44119.341213] eth0: tx ring full
[44122.446277] eth0: tx ring full
[44122.533108] eth0: tx ring full
[44129.895672] eth0: tx ring full
[44129.970884] eth0: tx ring full
[44130.052009] eth0: tx ring full
[44131.758292] eth0: tx ring full
[44131.838356] eth0: tx ring full
[44131.857476] eth0: tx ring full
[44131.919245] eth0: tx ring full
[44132.208855] eth0: tx ring full
[44132.268486] eth0: tx ring full
[44133.238833] eth0: tx ring full
[44133.632305] eth0: tx ring full
[44133.734402] eth0: tx ring full
[44134.254265] eth0: tx ring full
[44134.331669] eth0: tx ring full
[44136.437244] eth0: tx ring full
[44137.623479] eth0: tx ring full
[44154.038566] eth0: tx ring full
[44154.224960] eth0: tx ring full
[44154.468457] eth0: tx ring full
[44154.526942] eth0: tx ring full
[44154.604220] eth0: tx ring full
[44157.831404] eth0: tx ring full
[44157.895271] eth0: tx ring full
[44160.213616] eth0: tx ring full
[44164.852913] eth0: tx ring full
[44164.925561] eth0: tx ring full
[44165.046691] eth0: tx ring full
[44175.791876] eth0: tx ring full
[44176.003264] eth0: tx ring full
[44179.011414] eth0: tx ring full
[44179.060776] eth0: tx ring full
[44179.201263] eth0: tx ring full
[44180.631599] eth0: tx ring full
[44180.772604] eth0: tx ring full
[44180.892723] eth0: tx ring full
[44182.629672] eth0: tx ring full
[44182.689600] eth0: tx ring full
[44182.827388] eth0: tx ring full
[44183.375535] eth0: tx ring full
[44184.035557] eth0: tx ring full
[44184.117316] eth0: tx ring full
[44186.884009] eth0: tx ring full
[44189.970561] eth0: tx ring full
[44191.964088] eth0: tx ring full
[44192.056210] eth0: tx ring full
[44194.203009] eth0: tx ring full
[44195.170466] eth0: tx ring full
[44199.248112] eth0: tx ring full
[44199.342721] eth0: tx ring full
[44201.251077] eth0: tx ring full
[44202.152566] eth0: tx ring full
[44202.197567] eth0: tx ring full
[44203.186316] eth0: tx ring full
[44203.367517] eth0: tx ring full
[44203.410356] eth0: tx ring full
[44204.290746] eth0: tx ring full
[44204.363743] eth0: tx ring full
[44204.452740] eth0: tx ring full
[44204.600115] eth0: tx ring full
[44204.835943] eth0: tx ring full
[44204.891838] eth0: tx ring full
[44204.960019] eth0: tx ring full
[44207.703249] eth0: tx ring full
[44207.764557] eth0: tx ring full
[44208.078064] eth0: tx ring full
[44208.220652] eth0: tx ring full
[44208.317662] eth0: tx ring full
[44210.403972] eth0: tx ring full
[44210.812393] eth0: tx ring full
[44211.382622] eth0: tx ring full
[44212.199571] eth0: tx ring full
[44213.240191] eth0: tx ring full
[44222.213585] eth0: tx ring full
[44222.342522] eth0: tx ring full
[44222.591659] eth0: tx ring full
[44224.944630] eth0: tx ring full
[44228.974362] eth0: tx ring full
[44232.074372] eth0: tx ring full
[44232.169398] eth0: tx ring full
[44234.279705] eth0: tx ring full
[44234.990763] eth0: tx ring full
[44235.034239] eth0: tx ring full
[44237.443078] eth0: tx ring full
[44237.498241] eth0: tx ring full
[44238.950094] eth0: tx ring full
[44239.166380] eth0: tx ring full
[44239.209307] eth0: tx ring full
[44241.447317] eth0: tx ring full
[44242.333302] eth0: tx ring full
[44242.438482] eth0: tx ring full
[44242.569456] eth0: tx ring full
[44243.551450] eth0: tx ring full
[44244.838978] eth0: tx ring full
[44245.373908] eth0: tx ring full
[44245.813051] eth0: tx ring full
[44245.961066] eth0: tx ring full
[44246.785065] eth0: tx ring full
[44246.934422] eth0: tx ring full
[44247.953745] eth0: tx ring full
[44248.155734] eth0: tx ring full
[44248.351817] eth0: tx ring full
[44249.150433] eth0: tx ring full
[44251.751469] eth0: tx ring full
[44252.416446] eth0: tx ring full
[44253.567632] eth0: tx ring full
[44253.811640] eth0: tx ring full
[44254.331076] eth0: tx ring full
[44254.512355] eth0: tx ring full
[44254.720964] eth0: tx ring full
[44255.060524] eth0: tx ring full
[44255.127890] eth0: tx ring full
[44255.341410] eth0: tx ring full
[44257.121620] eth0: tx ring full
[44257.522704] eth0: tx ring full
[44257.937704] eth0: tx ring full
[44258.044733] eth0: tx ring full
[44259.710335] eth0: tx ring full
[44260.036279] eth0: tx ring full
[44260.101380] eth0: tx ring full
[44262.128394] eth0: tx ring full
[44262.191577] eth0: tx ring full
[44263.366937] eth0: tx ring full
[44265.131213] eth0: tx ring full
[44265.215646] eth0: tx ring full
[44266.845842] eth0: tx ring full
[44268.178983] eth0: tx ring full
[44269.397868] eth0: tx ring full
[44270.357064] eth0: tx ring full
[44271.942117] eth0: tx ring full
[44273.757873] eth0: tx ring full
[44273.985943] eth0: tx ring full
[44275.192835] eth0: tx ring full
[44275.288859] eth0: tx ring full
[44276.801024] eth0: tx ring full
[44279.229953] eth0: tx ring full
[44279.410629] eth0: tx ring full
[44279.473978] eth0: tx ring full
[44279.540150] eth0: tx ring full
[44279.905535] eth0: tx ring full
[44280.156999] eth0: tx ring full
[44280.295102] eth0: tx ring full
[44281.907118] eth0: tx ring full
[44282.198669] eth0: tx ring full
[44282.263901] eth0: tx ring full
[44282.934479] eth0: tx ring full
[44287.074998] eth0: tx ring full
[44288.402639] eth0: tx ring full
[44289.705923] eth0: tx ring full
[44289.935390] eth0: tx ring full
[44290.079374] eth0: tx ring full
[44290.148217] eth0: tx ring full
[44290.492600] eth0: tx ring full
[44290.886904] eth0: tx ring full
[44291.022995] eth0: tx ring full
[44291.542185] eth0: tx ring full
[44291.609559] eth0: tx ring full
[44291.702125] eth0: tx ring full
[44291.913105] eth0: tx ring full
[44294.118224] eth0: tx ring full
[44294.487795] eth0: tx ring full
[44297.213695] eth0: tx ring full
[44297.273446] eth0: tx ring full
[44297.424169] eth0: tx ring full
[44297.725371] eth0: tx ring full
[44297.964964] eth0: tx ring full
[44298.178107] eth0: tx ring full
[44298.279994] eth0: tx ring full
[44298.341052] eth0: tx ring full
[44298.709637] eth0: tx ring full
[44298.902312] eth0: tx ring full
[44299.107444] eth0: tx ring full
[44303.382071] eth0: tx ring full
[44303.467378] eth0: tx ring full
[44303.881013] eth0: tx ring full
[44304.706256] eth0: tx ring full
[44305.250907] eth0: tx ring full
[44306.923757] eth0: tx ring full
[44307.201797] eth0: tx ring full
[44307.306359] eth0: tx ring full
[44307.571467] eth0: tx ring full
[44308.677420] eth0: tx ring full
[44309.572257] eth0: tx ring full
[44310.354243] eth0: tx ring full
[44310.464527] eth0: tx ring full
[44311.364942] eth0: tx ring full
[44312.279103] eth0: tx ring full
[44312.516491] eth0: tx ring full

Using Lede 17.01.4:

BusyBox v1.25.1 () built-in shell (ash)

     _________
    /        /\      _    ___ ___  ___
   /  LE    /  \    | |  | __|   \| __|
  /    DE  /    \   | |__| _|| |) | _|
 /________/  LE  \  |____|___|___/|___|                      lede-project.org
 \        \   DE /
  \    LE  \    /  -----------------------------------------------------------
   \  DE    \  /    Reboot (17.01.4, r3560-79f57e422d)
    \________\/    -----------------------------------------------------------


Showing tasks 51 - 100 of 1046 Page 2 of 21 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing