OpenWrt/LEDE Project

Welcome to the OpenWrt Project bug reporting and issue tracking system

Problems to be reported here are for the current OpenWrt and legacy LEDE Project’s targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to openwrt-bugs@infradead.org.

Opened  descIDCategoryTask TypePrioritySeveritySummaryReported InStatus
04.04.20213722KernelBug ReportVery LowLowSoftware flow offloading breaks ECMP routingopenwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

 x86_64 Router

- Software versions of OpenWrt/LEDE release, packages, etc.

 OpenWrt 19.07.7 r11306-c4a6851c72, Linux 4.14.221 #0 SMP Mon Feb 15 15:22:37 2021 x86_64 GNU/Linux

- Steps to reproduce

Hey guys,

I met this issue when I was using ECMP (Equal Cost Multi-Path) routing with software flow offload enabled.

Suppose we have topology:

LAN 1 (192.168.1.0/24) ←—> (eth1: 192.168.1.1/24) OpenWRT (eth2: 192.168.2.1/24) ←—> (192.168.2.51-53/24) Other routers ←—> (192.168.150.0/24) LAN 2

1. Add ECMP routes:

$ ip route add 192.168.150.0/24 nexthop via 192.168.2.51 dev eth2 \
                                nexthop via 192.168.2.52 dev eth2 \
                                nexthop via 192.168.2.53 dev eth2

$ ip route
192.168.150.0/24 
	nexthop via 192.168.2.51 dev eth2 weight 1 
	nexthop via 192.168.2.52 dev eth2 weight 1 
	nexthop via 192.168.2.53 dev eth2 weight 1 

2. Setting multipatch hash policy:

sysctl net.ipv4.fib_multipath_hash_policy=1

3. Initiate TCP connections from LAN 1 (192.168.1.0/24) to LAN 2 (192.168.150.0/24) should succeed. Connections are balanced over 3 next hop routers (192.168.2.51-53).
4. Enable software flow offloading on LuCI.
5. Open a TCP connection from LAN 1 (192.168.1.0/24) to LAN 2 (192.168.150.0/24) will likely be broken because each packet for a single TCP connection could use a different next hop router to get to the destination.

I’m not sure if this is an OpenWRT issue or upstream kernel issue. Any help would be greatly appreciated.

02.04.20213721Base systemBug ReportVery LowMediumcustom "CONFIG_VERSION_DIST" breaks building Edimax ima...TrunkUnconfirmed Task Description

Just ran a custom build for ath79 with setting

CONFIG_VERSION_DIST="Roederer"

finally fails in target/linux/install with

/mnt/hosts/strike/develop/sven/openwrt/freifunk/freifunk-berlin/openwrt/staging_dir/host/bin/edimax_fw_header -M F9J1108v1 -m BR-6679BAC -v Roedererr15865 -n "uImage" -i /mnt/hosts/strike/develop/sven/openwrt/freifunk/freifunk-berlin/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/loader-belkin_f9j1108-v2.uImage -o /mnt/hosts/strike/develop/sven/openwrt/freifunk/freifunk-berlin/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/tmp/roederer-2021.04-1faf8bcb-ath79-generic-belkin_f9j1108-v2-squashfs-factory.bin.uImage
[edimax_fw_header] *** error: 'Roedererr15865' is too long, max firware version length is 13
Makefile:87: recipe for target '/mnt/hosts/strike/develop/sven/openwrt/freifunk/freifunk-berlin/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/tmp/roederer-2021.04-1faf8bcb-ath79-generic-belkin_f9j1108-v2-squashfs-factory.bin' failed
make[5]: *** [/mnt/hosts/strike/develop/sven/openwrt/freifunk/freifunk-berlin/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/tmp/roederer-2021.04-1faf8bcb-ath79-generic-belkin_f9j1108-v2-squashfs-factory.bin] Error 255

So the VERSION_DIST gets suffixed by “r15865” which make it 14 bytes long. With the default “OpenWrt” it will be excatly 13 bytes.

Not sure what’s the best fix:

  • limiting the max length of the CONFIG-option
  • stripping something from the vesion-string provided to the edimax_fw_header command
  • chopping the extra bytes

This was actually seen in OpenWrt-21.02, but the Makefile seems identical to master.
https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/ath79/image/generic.mk;h=f358d44064438c2aad4cf45840dee40f5381b2fe;hb=refs/heads/master#l55

02.04.20213719DocumentationBug ReportVery LowLowOpenwrt image builder instructions for FILES_REMOVE par...openwrt-19.07Unconfirmed Task Description

I’m attempting to use the x86 image builder for 19.07.7
https://downloads.openwrt.org/releases/19.07.7/targets/x86/64/openwrt-imagebuilder-19.07.7-x86-64.Linux-x86_64.tar.xz

There are some instructions in the documentation at:
https://openwrt.org/docs/guide-user/additional-software/imagebuilder

They say to patch the makefile:

 ifneq ($(USER_FILES),)
 	$(MAKE) copy_files
 endif
+
+ifneq ($(FILES_REMOVE),)
+	@echo
+	@echo Remove useless files
+
+	while read filename; do				\
+	    rm -rfv "$(TARGET_DIR)$$filename";	\
+	done < $(FILES_REMOVE);
+endif
+
 	$(MAKE) package_postinst
 	$(MAKE) build_image

But the Makefile layout seems to have changed since the instructions were written so it isn’t clear where to add this.

This is a really handy feature, so I hope the developers will eventually include this to avoid the need to patch the makefile.


01.04.20213717KernelBug ReportVery LowCriticalWRT1900ACS LAN Switch speed on kernel 5.4TrunkUnconfirmed Task Description

Dear, I ‘ve found an issue with DSA and kernel 5.4.
I’m on 21.02 SNAPSHOT.
My upload speed on WAN is only 10 mbps when a device with LAN connection is linked to 10mbps.
When a device 100mbps is connected to switch all speed is 100mbps not 1 gbps
It seems that the upload speed follow the lowest lan speed...

First test is with 10mbps connection on LAN3. –> Test was done from LAN1 to router.
Second test is with a LAN2 device conneted with 100mbps. –> Test was done from LAN1 to router

PS C:\Users\Andrea\Downloads\iperf-3.1.3-win64> .\iperf3.exe -c 192.168.181.1
Connecting to host 192.168.181.1, port 5201
[  4] local 192.168.181.159 port 50593 connected to 192.168.181.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.01   sec   384 KBytes  3.12 Mbits/sec
[  4]   1.01-2.01   sec   640 KBytes  5.26 Mbits/sec
[  4]   2.01-3.01   sec  1.12 MBytes  9.35 Mbits/sec
[  4]   3.01-4.01   sec  1.12 MBytes  9.52 Mbits/sec
[  4]   4.01-5.01   sec  1.12 MBytes  9.41 Mbits/sec
[  4]   5.01-6.00   sec  1.12 MBytes  9.50 Mbits/sec
[  4]   6.00-7.00   sec  1.12 MBytes  9.46 Mbits/sec
[  4]   7.00-8.00   sec  1.12 MBytes  9.41 Mbits/sec
[  4]   8.00-9.01   sec  1.12 MBytes  9.40 Mbits/sec
[  4]   9.01-10.01  sec  1.12 MBytes  9.44 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.01  sec  10.0 MBytes  8.38 Mbits/sec                  sender
[  4]   0.00-10.01  sec  9.81 MBytes  8.23 Mbits/sec                  receiver

iperf Done.
PS C:\Users\Andrea\Downloads\iperf-3.1.3-win64> .\iperf3.exe -c 192.168.181.1 -R
Connecting to host 192.168.181.1, port 5201
Reverse mode, remote host 192.168.181.1 is sending
[  4] local 192.168.181.159 port 50611 connected to 192.168.181.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  95.6 MBytes   802 Mbits/sec
[  4]   1.00-2.00   sec  97.9 MBytes   821 Mbits/sec
[  4]   2.00-3.00   sec   101 MBytes   847 Mbits/sec
[  4]   3.00-4.00   sec   101 MBytes   850 Mbits/sec
[  4]   4.00-5.00   sec   105 MBytes   884 Mbits/sec
[  4]   5.00-6.00   sec  92.3 MBytes   774 Mbits/sec
[  4]   6.00-7.00   sec   105 MBytes   877 Mbits/sec
[  4]   7.00-8.00   sec   102 MBytes   849 Mbits/sec
[  4]   8.00-9.00   sec  99.4 MBytes   836 Mbits/sec
[  4]   9.00-10.00  sec   107 MBytes   894 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec  1006 MBytes   844 Mbits/sec   23             sender
[  4]   0.00-10.00  sec  1006 MBytes   844 Mbits/sec                  receiver

This new test is with latest 19.07 (previous kernel no dsa)

BusyBox v1.30.1 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt 19.07-SNAPSHOT, r11328-81266d9001
 -----------------------------------------------------
root@WRT1900ACS:~# iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.181.159, port 48454
[  5] local 192.168.181.1 port 5201 connected to 192.168.181.159 port 48456
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec   108 MBytes   905 Mbits/sec                  
[  5]   1.00-2.00   sec   109 MBytes   915 Mbits/sec                  
[  5]   2.00-3.00   sec   109 MBytes   914 Mbits/sec                  
[  5]   3.00-4.00   sec   107 MBytes   900 Mbits/sec                  
[  5]   4.00-5.00   sec   108 MBytes   907 Mbits/sec                  
[  5]   5.00-6.00   sec   109 MBytes   912 Mbits/sec                  
[  5]   6.00-7.00   sec   107 MBytes   896 Mbits/sec                  
[  5]   7.00-8.00   sec   109 MBytes   917 Mbits/sec                  
[  5]   8.00-9.00   sec   108 MBytes   905 Mbits/sec                  
[  5]   9.00-10.00  sec   108 MBytes   903 Mbits/sec                  
[  5]  10.00-10.00  sec   293 KBytes   892 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.00  sec  1.06 GBytes   907 Mbits/sec 

I also noticed that with the latest version the switch LEDs flash all together and not only follow where there is communication, but I don’t think this is a problem.

Is this speed issue a bug or I do something wrong? I don’t make any changes to network config from standard. Only changed IP from 192.168.1.1 to 192.168.181.1.

31.03.20213714PackagesBug ReportVery LowHighSlow download speed using Kmod-usb-net-RTL8152openwrt-19.07Unconfirmed Task Description

Problem occurs with TP-Link u300 USB gigalan device chipset RTL8152 connected to usb 2.0 (not tested on 3.0)
too slow download speed on trunk compiled version and 19.07.7 stable to. Upload speed working as expected.
Working fine on 19.07.3

OpenWrt Version 19.07.7 / Trunk

- Steps to reproduce

install last trunk or 19.07.7 problem occurs, going back to 19.07.3 solves the problem
Package Kmod-usb-net-RTL8152

 


30.03.20213712Base systemBug ReportVery LowLowLinksys E8450 mt7915e failureTrunkUnconfirmed Task Description

Supply the following if possible:
- Linksys E8450 / Belking AX3200
- Latest snapshot as of 29.03.2021
- Flash firmware, boot

Looking at `readlog` I see the following:

```
Sun Mar 28 10:16:29 2021 kern.debug kernel: [ 8.144261] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’ Sun Mar 28 10:16:29 2021 kern.debug kernel: [ 8.155943] mt7915e 0000:01:00.0: assign IRQ: got 144
Sun Mar 28 10:16:29 2021 kern.debug kernel: [ 8.161082] pci 0000:00:00.0: enabling bus mastering
Sun Mar 28 10:16:29 2021 kern.info kernel: [ 8.166067] mt7915e 0000:01:00.0: enabling device (0000 → 0002)
Sun Mar 28 10:16:29 2021 kern.debug kernel: [ 8.172151] mt7915e 0000:01:00.0: enabling bus mastering
Sun Mar 28 10:16:29 2021 kern.info kernel: [ 8.209817] mt7622-wmac 18000000.wmac: HW/SW Version: 0x8a108a10, Build Time: 20190801210006a
Sun Mar 28 10:16:29 2021 kern.info kernel: [ 8.209817]
Sun Mar 28 10:16:29 2021 kern.info kernel: [ 8.286383] mt7622-wmac 18000000.wmac: N9 Firmware Version: 2.0, Build Time: 20200131180931
Sun Mar 28 10:16:29 2021 kern.err kernel: [ 12.176986] mt7915e 0000:01:00.0: Firmware is not ready for download
Sun Mar 28 10:16:29 2021 kern.warn kernel: [ 12.183510] mt7915e: probe of 0000:01:00.0 failed with error -5
```

 


29.03.20213711PackagesBuild FailureVery LowLowuqmi documentation errata? pdh on stop-networkTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

So, i was trying to understand how-to disable –autoconnect because i made a mistake, using the wrong APN.

I was following this tutorial:

https://openwrt.org/docs/guide-user/network/wan/wwan/ltedongle

And there is no place where it explains how-to disable autoconnect... I tried to edit the wiki, to add some informations, and to remove that option.. and I couldn’t login using github as a service (error on the openwrt website!

Anyway.. trying to read the documentation of uqmi.. i get this text:

–stop-network <pdh>: Stop network connection (use with option below)

  1. -autoconnect: Disable automatic connect/reconnect

Which makes me wonder, what is pdh?
Well, pdh is not documented.. at least on the whole openwrt website:

https://openwrt.org/docs/guide-user/network/wan/wwan/ltedongle?q=pdh&do=search

i mean this is not a rant, is really, can all this be fixed, so we have better software? :D

thank you guyz, awesome stuff!

29.03.20213710Base systemBug ReportVery LowLowatlantic.ko (Marvell/Aqtion/Aqantia AQC107/108) 10Gbit ...TrunkUnconfirmed Task Description

I have Several ASUS branded PCIe 10Gbit Cards based on the Aquantia Gen2 silicon, Some AQC107 based SFP+ modules and several ipq8074 boards with them. These work fine with the atlantic kernel driver which has been in mainline for some time.

Test build is x86_64 against the 21.02 tagged branch.

The 21.02 tagged branch (and the master, and 19.07) menuconfig for these cards do not appear despite the driver being present in the kernel source tree.

The lspci ID output of the card:

04:00.0 Ethernet controller [0200]: Aquantia Corp. AQC107 NBase-T/IEEE 802.3bz Ethernet Controller [AQtion] [1d6a:d107] (rev 02)
        Subsystem: ASUSTeK Computer Inc. XG-C100C [1043:8741]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at ed440000 (64-bit, non-prefetchable) [size=64K]
        Region 2: Memory at ed450000 (64-bit, non-prefetchable) [size=4K]
        Region 4: Memory at ed000000 (64-bit, non-prefetchable) [size=4M]
        Expansion ROM at ed400000 [disabled] [size=256K]
        Capabilities: [40] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 75.000W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 8GT/s (ok), Width x4 (ok)
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+ NROPrPrP- LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
                         EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
                         FRS- TPHComp- ExtTPHComp-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
                         AtomicOpsCtl: ReqEn-
                LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink+ Retimer- 2Retimers- DRS-
                LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+ EqualizationPhase1+
                         EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] MSI-X: Enable+ Count=32 Masked-
                Vector table: BAR=2 offset=00000000
                PBA: BAR=2 offset=00000200
        Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [c0] Vital Product Data
                Product Name: AQtion
                Read-only fields:
                        [PN] Part number: AquantiaPartNumber
                        [EC] Engineering changes: AquantiaEngineeringChangeLevel
                        [FG] Unknown: 41 71 75 61 6e 74 69 61 46 61 62 72 69 63 47 65 6f 67 72 61 70 68 79
                        [LC] Unknown: 41 71 75 61 6e 74 69 61 4c 6f 63 61 74 69 6f 6e
                        [MN] Manufacture ID: AquantiaManufacturingId
                        [PG] Unknown: 41 71 75 61 6e 74 69 61 50 63 69 47 65 6f 67 72 61 70 68 79
                        [SN] Serial number: AquantiaSerialNumber
                        [V0] Vendor specific: AquantiaVendorSpecificReadOnlyItem0
                        [V1] Vendor specific: AquantiaVendorSpecificReadOnlyItem1
                        [RV] Reserved: checksum good, 0 byte(s) reserved
                Read/write fields:
                        [YA] Asset tag: AquantiaAssetTagIdentifier
                        [V0] Vendor specific: AquantiaVendorSpecificWritableItem0
                        [V1] Vendor specific: AquantiaVendorSpecificWritableItem1
                        [Y0] System specific: AquantiaSystemSpecificWritableItem0
                        [Y1] System specific: AquantiaSystemSpecificWritableItem1
                        [RW] Read-write area: 9 byte(s) free
                End
        Capabilities: [100 v2] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Capabilities: [150 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
        Capabilities: [180 v1] Secondary PCI Express
                LnkCtl3: LnkEquIntrruptEn- PerformEqu-
                LaneErrStat: 0
        Kernel driver in use: atlantic
        Kernel modules: atlantic


[aenertia@fedora build]$ lsmod |grep atlantic
atlantic              229376  0
macsec                 61440  1 atlantic

Within the make kernel_menuconfig selection it is shown as a Y default, tristate flag when the x86_64 target is selected but never appears to get built into the resultant image.

On my comparison systems running RHEL8.3 and Fedora Rawhide - the atlantic kernel module has a dependency on the macsec kernel module - this is mentioned the 5.4 kernel source in the openwrt build tree for 21.02 tag - but seems to be silently dropped/skipped.

I tried several manual .config edits in the kernel build tree to force inclusion of the atlantic and macsec modules without success in the resultant images.
I note that there is a main kmod-macsec config entry in the primary .config buildroot ; but enabling that results in an architecture invalid for target error during kernel compilation. Is there perhaps a double up of the macsec name inside the build tree?

tl;dr Summary of required actions:

*Expose the Atlantic module/option in the main menuconfig buildroot
*Confirm why the atlantic module is set to Y by default, but not resulting in a usable driver in the kernel
*Check that the macsec module which appears to be a dependency for the atlantic driver does not have a naming conflict and/or why selecting it in the main buildroot results in an invalid arch error for x86_64 build target.

Severity ; the atlantic module is increasingly commonly deployed both in server, enthusiast and OEM embedded appliances (ipq80xx is a common pairing) as well as NBaseT SFP+ modules (rebadged by several vendors i.e Mikrotik) to supply NBaseT 10Gbit functionality. It has not been working in the last 2 openwrt releases and should be fixed before 21.02 goes out the door.

 


28.03.20213709Base systemBug ReportVery LowMediumrc.common enabled logic incompleteAllUnconfirmed Task Description

rc.common@enabled checks ‘S’ only

this results in incorrect output on K only init scripts ( umount )

###### poc
$> service

28.03.20213708Base systemBug ReportVery LowMediumrssileds: high CPU loadAllUnconfirmed Task Description

see: CPE210 high cpu load bug still present

Device problem occurs on:

ath79: CPE2xx, CPE5xx, maybe a major - think other devices too.

OpenWrt 19.07 - Steps to reproduce:

Bug is reproducible:
(for measurement did logout LuCI, then ssh & top)

Freifunk images → after FFwizard+reboot → CPU ~35%
→ set rssi (default: wlan0) to wlan0-dhcp2 or wlan0-mesh-2 in /etc/config/system → CPU ~5%

Openwrt stock (19.07.7), firstboot, wifi:
→ AP disabled (default setting) → CPU ~2%
→ AP enabled → CPU ~4%
!!! → AP disabled again → CPU ~20%
→ AP enabled again → CPU ~4%
→ AP + WWAN + Mesh → CPU ~5%
!!! → disabled everything (AP, WWAN, Mesh) → CPU 15-25%
→ enabled only one AP, WWAN or Mesh → CPU ~5%

If rssileds is disabled at boot, high CPU load doesnt occur.

top always shows /usr/sbin/rssileds 2% CPU
→ AP enabled → 0% sys
!!! → AP disabled → 14% sys

top AP disabled:
→ CPU: 4% usr 14% sys 0% nic 81% idle 0% io 0% irq 0% sirq

27.03.20213707KernelBug ReportVery LowCriticalx86_64: linux 5.10 cannot build objtoolTrunkUnconfirmed Task Description

Just use testing kernel version 5.10 on x86_64, run `make menuconfig` and `make V=sc`

Error log:

gcc -Wp,-MD,/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/.builtin-check.o.d -Wp,-MT,/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/builtin-check.o -Werror -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wstrict-aliasing=3 -Wshadow -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89 -O2 -I/home/wong/github/lede-1/staging_dir/host/include -Wall -Wmissing-prototypes -Wstrict-prototypes -g -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/include -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/arch/x86/include/uapi -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/arch/x86/include -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/arch/x86/include -I/home/wong/github/lede-1/staging_dir/host/include/libelf -I/home/wong/github/lede-1/staging_dir/host/include -DINSN_USE_ORC -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/lib -D"BUILD_STR(s)=#s" -c -o /home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/builtin-check.o builtin-check.c
gcc -Wp,-MD,/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/.builtin-orc.o.d -Wp,-MT,/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/builtin-orc.o -Werror -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wstrict-aliasing=3 -Wshadow -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89 -O2 -I/home/wong/github/lede-1/staging_dir/host/include -Wall -Wmissing-prototypes -Wstrict-prototypes -g -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/include -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/arch/x86/include/uapi -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/arch/x86/include -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/arch/x86/include -I/home/wong/github/lede-1/staging_dir/host/include/libelf -I/home/wong/github/lede-1/staging_dir/host/include -DINSN_USE_ORC -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/lib -D"BUILD_STR(s)=#s" -c -o /home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/builtin-orc.o builtin-orc.c
gcc -Wp,-MD,/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/.elf.o.d -Wp,-MT,/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/elf.o -Werror -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wstrict-aliasing=3 -Wshadow -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89 -O2 -I/home/wong/github/lede-1/staging_dir/host/include -Wall -Wmissing-prototypes -Wstrict-prototypes -g -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/include -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/arch/x86/include/uapi -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/arch/x86/include -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/arch/x86/include -I/home/wong/github/lede-1/staging_dir/host/include/libelf -I/home/wong/github/lede-1/staging_dir/host/include -DINSN_USE_ORC -I/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/lib -D"BUILD_STR(s)=#s" -c -o /home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/elf.o elf.c

elf.c: In function ‘read_symbols’:
elf.c:407:8: error: implicit declaration of function ‘gelf_getsymshndx’; did you mean ‘gelf_getsym’? [-Werror=implicit-function-declaration]

407 |   if (!gelf_getsymshndx(symtab->data, shndx_data, i, &sym->sym,
    |        ^~~~~~~~~~~~~~~~
    |        gelf_getsym

cc1: all warnings being treated as errors
make[8]: * [/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/build/Makefile.build:97: /home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/elf.o] Error 1
make[7]:
* [Makefile:59: /home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/tools/objtool/objtool-in.o] Error 2
make[6]: * [Makefile:68: objtool] Error 2
make[5]:
* [Makefile:1935: tools/objtool] Error 2
make[5]: Leaving directory ‘/home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26’ make[4]: * [Makefile:23: /home/wong/github/lede-1/build_dir/target-x86_64_musl/linux-x86_64/linux-5.10.26/.modules] Error 2
make[4]: Leaving directory ‘/home/wong/github/lede-1/target/linux/x86’ make[3]:
* [Makefile:11: compile] Error 2
make[3]: Leaving directory ‘/home/wong/github/lede-1/target/linux’ time: target/linux/compile#32.74#16.77#48.92

  ERROR: target/linux failed to build.
 


24.03.20213705Base systemBug ReportVery LowLowTrunk: WAN via NCM fails silently every 24 hours after ...TrunkUnconfirmed Task Description

Device: BTHH5a - Lantiq XRX200
Build: Trunk 23.03.21
Reproduce: Occurs every 24 hours

I build trunk to help find regressions.

In the last week I noticed NCM fails silently every 24 hours after flashing on a BTHH5a. Lease time is several days. This is new behavior.

I made a shell script to do a ping check on 3 nameservers to detect and restart WAN>

I predict it will fail again tomorrow at 16:36.

Any clues to more debugging from the NCM subsystem?

Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.524923] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.546637] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.555560] printk: console [ttyLTQ0] enabled
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.564285] printk: bootconsole [early0] disabled
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.577617] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.582607] nand: AMD/Spansion S34ML01G1
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.586556] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.594819] Bad block table found at page 65472, version 0x01
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.600883] Bad block table found at page 65408, version 0x01
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    0.605938] 4 fixed-partitions partitions found on MTD device 14000000.flash
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    0.612599] Creating 4 MTD partitions on "14000000.flash":
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    0.618093] 0x000000000000-0x0000000a0000 : "u-boot"
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    0.624987] 0x0000000a0000-0x0000000c0000 : "u-boot-env"
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    0.630969] 0x0000000c0000-0x000000100000 : "unused"
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    0.636457] 0x000000100000-0x000007f80000 : "ubi"
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.645077] libphy: Fixed MDIO Bus: probed
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.659563] NET: Registered protocol family 10
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.667008] Segment Routing with IPv6
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.669336] NET: Registered protocol family 17
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.673908] 8021q: 802.1Q VLAN Support v1.8
Tue Mar 23 15:04:05 2021 kern.err kernel: [    0.683515] pcie-xrx200 1d900000.pcie: failed to get the PCIe PHY
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.795893] libphy: lantiq,xrx200-mdio: probed
Tue Mar 23 15:04:05 2021 kern.warn kernel: [    0.805972] net-xrx200: invalid MAC, using random
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.809940] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:00: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:00, irq=POLL)
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.825543] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:01: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:01, irq=POLL)
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.840996] Intel XWAY PHY11G (xRX v1.2 integrated) 0:11: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:11, irq=POLL)
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.854746] Intel XWAY PHY11G (xRX v1.2 integrated) 0:13: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:13, irq=POLL)
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.868503] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:05: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:05, irq=POLL)
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.014189] PCI host bridge /fpi@10000000/pcie@d900000 ranges:
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.018835] PCI host bridge to bus 0000:01
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.022731] pci_bus 0000:01: root bus resource [mem 0x1c000000-0x1cffffff]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.029597] pci_bus 0000:01: root bus resource [io  0x1d800000-0x1d8fffff]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.036462] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.043247] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.051218] pci 0000:01:00.0: [1bef:0011] type 01 class 0x060000
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.057191] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.075009] pci 0000:01:00.0: ifx_pcie_rc_class_early_fixup+0x0/0x7c took 17350 usecs
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.081558] pci 0000:01:00.0: PME# supported from D0 D3hot
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.090116] pci 0000:01:00.0: bridge configuration invalid ([bus 02-00]), reconfiguring
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.097044] pci 0000:02:00.0: [168c:003c] type 00 class 0x028000
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.102817] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.109583] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.116354] pci 0000:02:00.0: supports D1 D2
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.123637] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.128881] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 02
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.135500] pci 0000:01:00.0: BAR 8: assigned [mem 0x1c000000-0x1c1fffff]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.142270] pci 0000:01:00.0: BAR 9: assigned [mem 0x1c200000-0x1c2fffff pref]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.149488] pci 0000:02:00.0: BAR 0: assigned [mem 0x1c000000-0x1c1fffff 64bit]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.156820] pci 0000:02:00.0: BAR 6: assigned [mem 0x1c200000-0x1c20ffff pref]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.164012] pci 0000:01:00.0: PCI bridge to [bus 02]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.168989] pci 0000:01:00.0:   bridge window [mem 0x1c000000-0x1c1fffff]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.175777] pci 0000:01:00.0:   bridge window [mem 0x1c200000-0x1c2fffff pref]
Tue Mar 23 15:04:05 2021 kern.warn kernel: [    1.183147] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
Tue Mar 23 15:04:05 2021 kern.warn kernel: [    1.189584] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.195879] pcieport 0000:01:00.0: enabling device (0000 -> 0002)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.203464] UBI: auto-attach mtd3
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.205354] ubi0: attaching mtd3
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.357514] ubi0: scanning is finished
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.374033] ubi0: attached mtd3 (name "ubi", size 126 MiB)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.378136] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.385029] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.391699] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.398488] ubi0: good PEBs: 1012, bad PEBs: 0, corrupted PEBs: 0
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.404563] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.411813] ubi0: max/mean erase counter: 1092/814, WL threshold: 4096, image sequence number: 228104625
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.421283] ubi0: available PEBs: 0, total reserved PEBs: 1012, PEBs reserved for bad PEB handling: 20
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.430682] ubi0: background thread "ubi_bgt0d" started, PID 471
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.438869] block ubiblock0_1: created from ubi0:1(rootfs)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.443017] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.457274] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.466953] Freeing unused kernel memory: 1244K
Tue Mar 23 15:04:05 2021 kern.warn kernel: [    1.470098] This architecture does not have kernel memory protection.
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.476515] Run /sbin/init as init process
Tue Mar 23 15:04:05 2021 user.info kernel: [    2.113559] init: Console is alive
Tue Mar 23 15:04:05 2021 user.info kernel: [    2.115960] init: - watchdog -
Tue Mar 23 15:04:05 2021 user.info kernel: [    3.754070] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    3.829501] SCSI subsystem initialized
Tue Mar 23 15:04:05 2021 kern.warn kernel: [    3.842821] dwc2 1e101000.usb: 1e101000.usb supply vusb_d not found, using dummy regulator
Tue Mar 23 15:04:05 2021 kern.warn kernel: [    3.849870] dwc2 1e101000.usb: 1e101000.usb supply vusb_a not found, using dummy regulator
Tue Mar 23 15:04:05 2021 kern.info kernel: [    3.959564] dwc2 1e101000.usb: DWC OTG Controller
Tue Mar 23 15:04:05 2021 kern.info kernel: [    3.962941] dwc2 1e101000.usb: new USB bus registered, assigned bus number 1
Tue Mar 23 15:04:05 2021 kern.info kernel: [    3.969986] dwc2 1e101000.usb: irq 62, io mem 0x1e101000
Tue Mar 23 15:04:05 2021 kern.info kernel: [    3.977039] hub 1-0:1.0: USB hub found
Tue Mar 23 15:04:05 2021 kern.info kernel: [    3.979562] hub 1-0:1.0: 1 port detected
Tue Mar 23 15:04:05 2021 kern.info kernel: [    3.989718] usbcore: registered new interface driver usb-storage
Tue Mar 23 15:04:05 2021 user.info kernel: [    3.995061] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Tue Mar 23 15:04:05 2021 user.info kernel: [    4.012149] init: - preinit -
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    5.519932] random: procd: uninitialized urandom read (4 bytes read)
Tue Mar 23 15:04:05 2021 user.info kernel: [    9.824350] mount_root: loading kmods from internal overlay
Tue Mar 23 15:04:05 2021 user.info kernel: [    9.879272] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Tue Mar 23 15:04:05 2021 user.info kernel: [    9.887320] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.236622] UBIFS (ubi0:2): Mounting in unauthenticated mode
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.241278] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 569
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.367666] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.374123] UBIFS (ubi0:2): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.384034] UBIFS (ubi0:2): FS size: 117411840 bytes (111 MiB, 910 LEBs), journal size 5935104 bytes (5 MiB, 46 LEBs)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.394632] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.401263] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 2E577506-86FB-47CB-851E-14AE2AB00D76, small LPT model
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.413135] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.419837] block: unable to load configuration (fstab: Entry not found)
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.426431] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.432978] block: unable to load configuration (fstab: Entry not found)
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.439565] block: attempting to load /etc/config/fstab
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.451154] block: unable to load configuration (fstab: Entry not found)
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.456712] block: no usable configuration
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.464797] UBIFS (ubi0:2): un-mount UBI device 0
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.468207] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.480193] UBIFS (ubi0:2): Mounting in unauthenticated mode
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.484850] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 572
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.611041] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.617582] UBIFS (ubi0:2): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.627408] UBIFS (ubi0:2): FS size: 117411840 bytes (111 MiB, 910 LEBs), journal size 5935104 bytes (5 MiB, 46 LEBs)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.638017] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.644639] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 2E577506-86FB-47CB-851E-14AE2AB00D76, small LPT model
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.813961] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.819840] block: unable to load configuration (fstab: Entry not found)
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.826434] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.832964] block: unable to load configuration (fstab: Entry not found)
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.839551] block: attempting to load /etc/config/fstab
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.844854] block: unable to load configuration (fstab: Entry not found)
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.851466] block: no usable configuration
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.857203] mount_root: overlay filesystem has not been fully initialized yet
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.864157] mount_root: switching to ubifs overlay
Tue Mar 23 15:04:05 2021 user.warn kernel: [   11.415875] urandom-seed: Seed file not found (/etc/urandom.seed)
Tue Mar 23 15:04:05 2021 user.info kernel: [   11.556254] procd: - early -
Tue Mar 23 15:04:05 2021 user.info kernel: [   11.558063] procd: - watchdog -
Tue Mar 23 15:04:05 2021 user.info kernel: [   12.157149] procd: - watchdog -
Tue Mar 23 15:04:05 2021 user.info kernel: [   12.160252] procd: - ubus -
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   12.418847] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   12.427687] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   12.541381] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Mar 23 15:04:05 2021 user.info kernel: [   12.555210] procd: - init -
Tue Mar 23 15:04:05 2021 user.info kernel: [   13.746957] kmodloader: loading kernel modules from /etc/modules.d/*
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.040327] usbcore: registered new interface driver cdc_wdm
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.046552] Loading modules backported from Linux version v5.10.16-0-gde53befa79cf
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.052743] Backport generated by backports.git v5.10.16-1-0-g21d2a1d2
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.097157] Infineon Technologies DEU driver version 2.0.0
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.103850] IFX DEU DES initialized (multiblock).
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.109222] IFX DEU AES initialized (multiblock).
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.113396] IFX DEU ARC4 initialized (multiblock).
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.117772] IFX DEU SHA1 initialized.
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.121372] IFX DEU MD5 initialized.
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.124987] IFX DEU SHA1_HMAC initialized.
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.129133] IFX DEU MD5_HMAC initialized.
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.144055] usbcore: registered new interface driver ums-alauda
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.151211] usbcore: registered new interface driver ums-cypress
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.158922] usbcore: registered new interface driver ums-datafab
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.166597] usbcore: registered new interface driver ums-freecom
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.173959] usbcore: registered new interface driver ums-isd200
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.181636] usbcore: registered new interface driver ums-jumpshot
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.189448] usbcore: registered new interface driver ums-karma
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.197117] usbcore: registered new interface driver ums-sddr09
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.206962] usbcore: registered new interface driver ums-sddr55
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.215819] usbcore: registered new interface driver ums-usbat
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.234713] usbcore: registered new interface driver usbserial_generic
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.240120] usbserial: USB Serial support registered for generic
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.268689] xt_time: kernel timezone is -0000
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.274568] ath9k_pci_owl_loader 0000:00:0e.0: enabling device (0000 -> 0002)
Tue Mar 23 15:04:05 2021 kern.warn kernel: [   14.290630] ath9k_pci_owl_loader 0000:00:0e.0: Direct firmware load for ath9k-eeprom-pci-0000:00:0e.0.bin failed with error -2
Tue Mar 23 15:04:05 2021 kern.warn kernel: [   14.300675] ath9k_pci_owl_loader 0000:00:0e.0: Falling back to sysfs fallback for: ath9k-eeprom-pci-0000:00:0e.0.bin
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.316437] usbcore: registered new interface driver cdc_eem
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.326150] usbcore: registered new interface driver cdc_ether
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.336612] usbcore: registered new interface driver cdc_ncm
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.344135] usbcore: registered new interface driver cdc_subset
Tue Mar 23 15:04:05 2021 user.info kernel: [   14.595585] urngd: v1.0.2 started.
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.660686] usbcore: registered new interface driver dm9601
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.668101] usbcore: registered new interface driver huawei_cdc_ncm
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.760747] usbcore: registered new interface driver qmi_wwan
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.770211] usbcore: registered new interface driver rndis_host
Tue Mar 23 15:04:05 2021 kern.warn kernel: [   14.839776] ifx_pcie_bios_map_irq port 0 dev 0000:02:00.0 slot 0 pin 1
Tue Mar 23 15:04:05 2021 kern.warn kernel: [   14.845037] ifx_pcie_bios_map_irq dev 0000:02:00.0 irq 144 assigned
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.851345] ath10k 5.10 driver, optimized for CT firmware, probing pci device: 0x3c.
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.860934] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.866193] ath10k_pci 0000:02:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.117981] usb 1-1: new high-speed USB device number 2 using dwc2
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   15.225687] random: crng init done
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   15.227868] random: 6 urandom warning(s) missed due to ratelimiting
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.363300] huawei_cdc_ncm 1-1:1.3: MAC-Address: 0c:5b:8f:27:9a:64
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.368205] huawei_cdc_ncm 1-1:1.3: setting rx_max = 16384
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.377896] huawei_cdc_ncm 1-1:1.3: setting tx_max = 16384
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.385744] huawei_cdc_ncm 1-1:1.3: NDP will be placed at end of frame for this device.
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.392918] huawei_cdc_ncm 1-1:1.3: cdc-wdm0: USB WDM device
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.400019] huawei_cdc_ncm 1-1:1.3 wwan0: register 'huawei_cdc_ncm' at usb-1e101000.usb-1, Huawei CDC NCM device, 0c:5b:8f:27:9a:64
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.411264] usb-storage 1-1:1.4: USB Mass Storage device detected
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.418201] scsi host0: usb-storage 1-1:1.4
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.568599] ath9k_pci_owl_loader 0000:00:0e.0: fixup device configuration
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.587360] pci 0000:00:0e.0: [168c:002d] type 00 class 0x028000
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.592080] pci 0000:00:0e.0: reg 0x10: [mem 0x18000000-0x1800ffff]
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.598448] pci 0000:00:0e.0: PME# supported from D0 D3hot
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.607041] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   16.443600] scsi 0:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   16.633508] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   16.642534] sd 0:0:0:0: [sda] Write Protect is off
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   16.646059] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   16.647179] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Tue Mar 23 15:04:05 2021 kern.info kernel: [   16.677518]  sda: sda1
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   16.687139] sd 0:0:0:0: [sda] Attached SCSI removable disk
Tue Mar 23 15:04:05 2021 kern.info kernel: [   18.862665] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
Tue Mar 23 15:04:05 2021 kern.info kernel: [   18.870614] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 1 testmode 0
Tue Mar 23 15:04:05 2021 kern.info kernel: [   18.884330] ath10k_pci 0000:02:00.0: firmware ver 10.1-ct-8x-__fH-022-ecad3248 api 2 features wmi-10.x,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 1b2a161c
Tue Mar 23 15:04:05 2021 kern.info kernel: [   19.084124] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
Tue Mar 23 15:04:05 2021 kern.warn kernel: [   19.910149] ath10k_pci 0000:02:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
Tue Mar 23 15:04:05 2021 kern.info kernel: [   19.926171] ath10k_pci 0000:02:00.0: wmi print 'P 128 V 8 T 410'
Tue Mar 23 15:04:05 2021 kern.info kernel: [   19.930797] ath10k_pci 0000:02:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
Tue Mar 23 15:04:05 2021 kern.info kernel: [   19.939190] ath10k_pci 0000:02:00.0: wmi print 'alloc rem: 25000 iram: 38944'
Tue Mar 23 15:04:05 2021 kern.info kernel: [   19.992725] ath10k_pci 0000:02:00.0: htt-ver 2.2 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.006953] ath10k_pci 0000:02:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.126420] ath: EEPROM regdomain: 0x833a
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.126431] ath: EEPROM indicates we should expect a country code
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.126447] ath: doing EEPROM country->regdmn map search
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.126456] ath: country maps to regdmn code: 0x37
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.126463] ath: Country alpha2 being used: GB
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.126468] ath: Regpair used: 0x37
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.169539] usbcore: registered new interface driver cdc_mbim
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.196975] usbcore: registered new interface driver option
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.201375] usbserial: USB Serial support registered for GSM modem (1-port)
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.208709] option 1-1:1.0: GSM modem (1-port) converter detected
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.214789] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.221505] option 1-1:1.1: GSM modem (1-port) converter detected
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.227689] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.234373] option 1-1:1.2: GSM modem (1-port) converter detected
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.240580] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.267341] ath9k 0000:00:0e.0: enabling device (0000 -> 0002)
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.278171] ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.285640] ath: EEPROM regdomain: 0x833a
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.285652] ath: EEPROM indicates we should expect a country code
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.285674] ath: doing EEPROM country->regdmn map search
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.285688] ath: country maps to regdmn code: 0x37
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.285699] ath: Country alpha2 being used: GB
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.285708] ath: Regpair used: 0x37
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.306476] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.309393] ieee80211 phy1: Atheros AR9287 Rev:2 mem=0xb8000000, irq=30
Tue Mar 23 15:04:05 2021 user.info kernel: [   20.318838] kmodloader: done loading kernel modules from /etc/modules.d/*
Tue Mar 23 15:04:07 2021 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Tue Mar 23 15:04:07 2021 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: Connected to system UBus
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: started, version 2.84 cachesize 150
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: DNS service limited to local subnets
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: UBus support enabled: connected to system bus
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain test
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain onion
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain localhost
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain local
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain invalid
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain bind
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain lan
Tue Mar 23 15:04:08 2021 daemon.warn dnsmasq[1825]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: read /etc/hosts - 4 addresses
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Tue Mar 23 15:04:09 2021 authpriv.info dropbear[1887]: Not backgrounding
Tue Mar 23 15:04:11 2021 daemon.notice wpa_supplicant[1986]: Successfully initialized wpa_supplicant
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: 8021ad
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: 8021q
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: macvlan
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: veth
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: bridge
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: Network device
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: tunnel
Tue Mar 23 15:04:14 2021 daemon.err block: /dev/ubi0_2 is already mounted on /overlay
Tue Mar 23 15:04:17 2021 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Tue Mar 23 15:04:17 2021 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Tue Mar 23 15:04:17 2021 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Tue Mar 23 15:04:17 2021 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Tue Mar 23 15:04:17 2021 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Tue Mar 23 15:04:17 2021 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Tue Mar 23 15:04:18 2021 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Tue Mar 23 15:04:18 2021 kern.info kernel: [   38.517357] device eth0 entered promiscuous mode
Tue Mar 23 15:04:18 2021 kern.info kernel: [   38.523607] br-lan: port 1(eth0.1) entered blocking state
Tue Mar 23 15:04:18 2021 kern.info kernel: [   38.527689] br-lan: port 1(eth0.1) entered disabled state
Tue Mar 23 15:04:18 2021 kern.info kernel: [   38.533706] device eth0.1 entered promiscuous mode
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'lan' is enabled
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'lan' is setting up now
Tue Mar 23 15:04:18 2021 daemon.debug dnsmasq[1825]: listening on br-lan(#6): 192.168.9.1 port 53
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'lan' is now up
Tue Mar 23 15:04:18 2021 daemon.debug dnsmasq[1825]: listening on lo(#1): 127.0.0.1 port 53
Tue Mar 23 15:04:18 2021 daemon.debug dnsmasq[1825]: listening on lo(#1): ::1 port 53
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'loopback' is enabled
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'loopback' is now up
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'wan' is setting up now
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Network device 'lo' link is up
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Mar 23 15:04:19 2021 daemon.err odhcpd[2208]: Failed to send to ff02::1%lan@br-lan (Permission denied)
Tue Mar 23 15:04:19 2021 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Tue Mar 23 15:04:20 2021 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Tue Mar 23 15:04:20 2021 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878132] ath: EEPROM regdomain: 0x8174
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878196] ath: EEPROM indicates we should expect a country code
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878212] ath: doing EEPROM country->regdmn map search
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878251] ath: country maps to regdmn code: 0x37
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878262] ath: Country alpha2 being used: IE
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878268] ath: Regpair used: 0x37
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878280] ath: regdomain 0x8174 dynamically updated by user
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878538] ath: EEPROM regdomain: 0x8174
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878560] ath: EEPROM indicates we should expect a country code
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878586] ath: doing EEPROM country->regdmn map search
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878657] ath: country maps to regdmn code: 0x37
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878668] ath: Country alpha2 being used: IE
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878674] ath: Regpair used: 0x37
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878686] ath: regdomain 0x8174 dynamically updated by user
Tue Mar 23 15:04:21 2021 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Tue Mar 23 15:04:21 2021 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Tue Mar 23 15:04:23 2021 daemon.notice netifd: wan (2527): sending -> AT
Tue Mar 23 15:04:23 2021 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy wlan1) --> new PHY
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.120562] br-lan: port 2(wlan1) entered blocking state
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.124694] br-lan: port 2(wlan1) entered disabled state
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.130939] device wlan1 entered promiscuous mode
Tue Mar 23 15:04:24 2021 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Mar 23 15:04:24 2021 daemon.notice netifd: wan (2527): sending -> ATZ
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.494055] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.499500] br-lan: port 2(wlan1) entered blocking state
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.504420] br-lan: port 2(wlan1) entered forwarding state
Tue Mar 23 15:04:24 2021 daemon.notice netifd: bridge 'br-lan' link is up
Tue Mar 23 15:04:24 2021 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.526090] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Mar 23 15:04:24 2021 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY
Tue Mar 23 15:04:24 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led wifi
Tue Mar 23 15:04:24 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led dsl
Tue Mar 23 15:04:24 2021 daemon.notice netifd: wan (2527): sending -> ATQ0
Tue Mar 23 15:04:25 2021 daemon.notice netifd: wan (2527): sending -> ATV1
Tue Mar 23 15:04:25 2021 kern.warn kernel: [   45.516706] ath10k_pci 0000:02:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.532563] ath10k_pci 0000:02:00.0: wmi print 'P 128 V 8 T 410'
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.537788] ath10k_pci 0000:02:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.545295] ath10k_pci 0000:02:00.0: wmi print 'alloc rem: 25000 iram: 38944'
Tue Mar 23 15:04:25 2021 kern.warn kernel: [   45.615705] ath10k_pci 0000:02:00.0: pdev param 0 not supported by firmware
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.630004] ath10k_pci 0000:02:00.0: rts threshold -1
Tue Mar 23 15:04:25 2021 kern.warn kernel: [   45.633786] ath10k_pci 0000:02:00.0: set-coverage-class, phyclk: 88  value: 1
Tue Mar 23 15:04:25 2021 daemon.err odhcpd[2208]: Failed to send to ff02::1%lan@br-lan (Address not available)
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.656565] br-lan: port 3(wlan0) entered blocking state
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.660628] br-lan: port 3(wlan0) entered disabled state
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.666544] device wlan0 entered promiscuous mode
Tue Mar 23 15:04:25 2021 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Mar 23 15:04:25 2021 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Tue Mar 23 15:04:25 2021 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ACS
Tue Mar 23 15:04:25 2021 daemon.notice hostapd: wlan0: ACS-STARTED
Tue Mar 23 15:04:25 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led dimmed
Tue Mar 23 15:04:25 2021 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ENABLED
Tue Mar 23 15:04:25 2021 daemon.notice hostapd: wlan1: AP-ENABLED
Tue Mar 23 15:04:26 2021 daemon.notice netifd: wan (2527): sending -> ATE1
Tue Mar 23 15:04:26 2021 daemon.debug dnsmasq[1825]: listening on wlan1(#8): fe80::1a62:2cff:fe27:244a%wlan1 port 53
Tue Mar 23 15:04:26 2021 daemon.debug dnsmasq[1825]: listening on br-lan(#6): fe80::a21b:29ff:fe5b:7faa%br-lan port 53
Tue Mar 23 15:04:26 2021 daemon.notice netifd: wan (2527): sending -> ATS0=0
Tue Mar 23 15:04:26 2021 daemon.info procd: - init complete -
Tue Mar 23 15:04:27 2021 daemon.notice netifd: wan (2527): sending -> AT+CGDCONT=1,"IP","broadband.mymeteor.ie"
Tue Mar 23 15:04:27 2021 daemon.info urandom_seed[3256]: Seed saved (/etc/urandom.seed)
Tue Mar 23 15:04:27 2021 daemon.notice netifd: Network device 'wlan1' link is up
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[1825]: exiting on receipt of SIGTERM
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: Connected to system UBus
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: started, version 2.84 cachesize 150
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: DNS service limited to local subnets
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: UBus support enabled: connected to system bus
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq-dhcp[3330]: DHCP, IP range 192.168.9.100 -- 192.168.9.249, lease time 12h
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain test
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain onion
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain localhost
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain local
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain invalid
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain bind
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain lan
Tue Mar 23 15:04:28 2021 daemon.warn dnsmasq[3330]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: read /etc/hosts - 4 addresses
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq-dhcp[3330]: read /etc/ethers - 0 addresses
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: read /etc/hosts - 4 addresses
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq-dhcp[3330]: read /etc/ethers - 0 addresses
Tue Mar 23 15:04:28 2021 daemon.notice netifd: wan (2527): Configuring modem
Tue Mar 23 15:04:28 2021 daemon.notice netifd: wan (2527): Starting network wan
Tue Mar 23 15:04:28 2021 daemon.notice netifd: wan (2527): Connecting modem
Tue Mar 23 15:04:28 2021 daemon.notice netifd: wan (2527): sending -> AT^NDISDUP=1,1,"broadband.mymeteor.ie"
Tue Mar 23 15:04:29 2021 daemon.notice netifd: wan (2527): Setting up wwan0
Tue Mar 23 15:04:29 2021 daemon.notice netifd: Interface 'wan' is now up
Tue Mar 23 15:04:29 2021 daemon.notice netifd: Network device 'wwan0' link is up
Tue Mar 23 15:04:29 2021 daemon.notice netifd: Network alias 'wwan0' link is up
Tue Mar 23 15:04:29 2021 daemon.notice netifd: Interface 'wan_4' is enabled
Tue Mar 23 15:04:29 2021 daemon.notice netifd: Interface 'wan_4' has link connectivity
Tue Mar 23 15:04:29 2021 daemon.notice netifd: Interface 'wan_4' is setting up now
Tue Mar 23 15:04:30 2021 daemon.info dnsmasq[3330]: read /etc/hosts - 4 addresses
Tue Mar 23 15:04:30 2021 daemon.info dnsmasq[3330]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Tue Mar 23 15:04:30 2021 daemon.info dnsmasq-dhcp[3330]: read /etc/ethers - 0 addresses
Tue Mar 23 15:04:30 2021 daemon.notice netifd: wan_4 (3534): udhcpc: started, v1.33.0
Tue Mar 23 15:04:30 2021 user.notice firewall: Reloading firewall due to ifup of wan (wwan0)
Tue Mar 23 15:04:30 2021 daemon.notice netifd: wan_4 (3534): udhcpc: sending discover
Tue Mar 23 15:04:30 2021 daemon.notice netifd: wan_4 (3534): udhcpc: sending select for 100.70.78.141
Tue Mar 23 15:04:30 2021 daemon.notice netifd: wan_4 (3534): udhcpc: lease of 100.70.78.141 obtained, lease time 518400
Tue Mar 23 15:04:31 2021 daemon.debug dnsmasq[3330]: listening on wwan0(#3): 100.70.78.141 port 53
Tue Mar 23 15:04:31 2021 daemon.notice netifd: Interface 'wan_4' is now up
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: reading /tmp/resolv.conf.d/resolv.conf.auto
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain test
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain onion
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain localhost
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain local
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain invalid
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain bind
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain lan
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using nameserver 159.134.0.11#53
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using nameserver 159.134.0.12#53
Tue Mar 23 15:04:31 2021 daemon.debug dnsmasq[3330]: listening on wwan0(#3): fe80::e5b:8fff:fe27:9a64%wwan0 port 53
Tue Mar 23 15:04:32 2021 user.notice firewall: Reloading firewall due to ifup of wan_4 (wwan0)
Tue Mar 23 16:35:41 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 IEEE 802.11: authenticated
Tue Mar 23 16:35:41 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 IEEE 802.11: associated (aid 1)
Tue Mar 23 16:35:41 2021 daemon.notice hostapd: wlan1: AP-STA-CONNECTED d8:9c:67:ac:c4:b3
Tue Mar 23 16:35:41 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 WPA: pairwise key handshake completed (RSN)
Tue Mar 23 16:35:41 2021 user.info banIP-0.7.5[4021]: start banIP processing (refresh)
Tue Mar 23 16:35:41 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3
Tue Mar 23 16:35:41 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3 JDonnell
Tue Mar 23 16:35:42 2021 daemon.info dnsmasq[3330]: read /etc/hosts - 4 addresses
Tue Mar 23 16:35:42 2021 daemon.info dnsmasq[3330]: read /tmp/hosts/odhcpd - 0 addresses
Tue Mar 23 16:35:42 2021 daemon.info dnsmasq[3330]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Tue Mar 23 16:35:42 2021 daemon.info dnsmasq-dhcp[3330]: read /etc/ethers - 0 addresses
Tue Mar 23 16:35:42 2021 user.info banIP-0.7.5[4021]: IP address '100.70.78.141/30' added to whitelist
Tue Mar 23 16:35:47 2021 daemon.notice hostapd: wlan0: ACS-COMPLETED freq=5500 channel=100
Tue Mar 23 16:35:47 2021 daemon.notice hostapd: wlan0: interface state ACS->HT_SCAN
Tue Mar 23 16:35:50 2021 daemon.notice hostapd: wlan0: interface state HT_SCAN->DFS
Tue Mar 23 16:35:50 2021 daemon.notice hostapd: wlan0: DFS-CAC-START freq=5500 chan=100 sec_chan=1, width=1, seg0=106, seg1=0, cac_time=60s
Tue Mar 23 16:36:07 2021 cron.err crond[2278]: time disparity of 91 minutes detected
Tue Mar 23 16:36:47 2021 daemon.info hostapd: wlan1: STA a4:71:74:e9:90:33 IEEE 802.11: authenticated
Tue Mar 23 16:36:47 2021 daemon.info hostapd: wlan1: STA a4:71:74:e9:90:33 IEEE 802.11: associated (aid 2)
Tue Mar 23 16:36:47 2021 daemon.notice hostapd: wlan1: AP-STA-CONNECTED a4:71:74:e9:90:33
Tue Mar 23 16:36:47 2021 daemon.info hostapd: wlan1: STA a4:71:74:e9:90:33 WPA: pairwise key handshake completed (RSN)
Tue Mar 23 16:36:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.157 a4:71:74:e9:90:33
Tue Mar 23 16:36:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.157 a4:71:74:e9:90:33 HUAWEI_P9
Tue Mar 23 16:36:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.157 a4:71:74:e9:90:33
Tue Mar 23 16:36:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.157 a4:71:74:e9:90:33 HUAWEI_P9
Tue Mar 23 16:36:50 2021 kern.info kernel: [  123.929810] ath10k_pci 0000:02:00.0: mac flush null vif, drop 0 queues 0xffff
Tue Mar 23 16:36:50 2021 daemon.notice hostapd: wlan0: DFS-CAC-COMPLETED success=1 freq=5500 ht_enabled=0 chan_offset=0 chan_width=3 cf1=5530 cf2=0
Tue Mar 23 16:36:51 2021 kern.info kernel: [  124.246614] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Mar 23 16:36:51 2021 kern.info kernel: [  124.252192] br-lan: port 3(wlan0) entered blocking state
Tue Mar 23 16:36:51 2021 kern.info kernel: [  124.256935] br-lan: port 3(wlan0) entered forwarding state
Tue Mar 23 16:36:51 2021 daemon.notice hostapd: wlan0: interface state DFS->ENABLED
Tue Mar 23 16:36:51 2021 daemon.notice hostapd: wlan0: AP-ENABLED
Tue Mar 23 16:36:51 2021 daemon.notice netifd: Network device 'wlan0' link is up
Tue Mar 23 16:36:52 2021 daemon.debug dnsmasq[3330]: listening on wlan0(#9): fe80::1a62:2cff:fe27:244b%wlan0 port 53
Tue Mar 23 16:36:59 2021 daemon.warn dnsmasq[3330]: nameserver 159.134.0.11 refused to do a recursive query
Tue Mar 23 16:39:36 2021 user.info banIP-0.7.5[4021]: 20 IPSets with overall 341200 IPs/Prefixes loaded successfully (BT Home Hub 5A, OpenWrt SNAPSHOT r16313-851dadc257)
Tue Mar 23 16:53:54 2021 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED a4:71:74:e9:90:33
Tue Mar 23 16:53:54 2021 daemon.info hostapd: wlan1: STA a4:71:74:e9:90:33 IEEE 802.11: disassociated
Tue Mar 23 16:53:55 2021 daemon.info hostapd: wlan1: STA a4:71:74:e9:90:33 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Mar 23 20:07:26 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: authenticated
Tue Mar 23 20:07:26 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: associated (aid 1)
Tue Mar 23 20:07:26 2021 daemon.notice hostapd: wlan0: AP-STA-CONNECTED a4:71:74:e9:90:33
Tue Mar 23 20:07:26 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 WPA: pairwise key handshake completed (RSN)
Tue Mar 23 20:07:26 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.157 a4:71:74:e9:90:33
Tue Mar 23 20:07:26 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.157 a4:71:74:e9:90:33 HUAWEI_P9
Tue Mar 23 20:07:26 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.157 a4:71:74:e9:90:33
Tue Mar 23 20:07:26 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.157 a4:71:74:e9:90:33 HUAWEI_P9
Tue Mar 23 20:32:40 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: authenticated
Tue Mar 23 20:32:40 2021 daemon.notice hostapd: wlan0: STA-OPMODE-N_SS-CHANGED 8c:f5:a3:a5:78:02 2
Tue Mar 23 20:32:40 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: associated (aid 2)
Tue Mar 23 20:32:40 2021 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:40 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 WPA: pairwise key handshake completed (RSN)
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02 Galaxy-S7
Tue Mar 23 21:07:34 2021 daemon.notice hostapd: wlan1: STA-OPMODE-MAX-BW-CHANGED d8:9c:67:ac:c4:b3 20
Tue Mar 23 21:08:12 2021 daemon.notice hostapd: wlan1: STA-OPMODE-MAX-BW-CHANGED d8:9c:67:ac:c4:b3 40
Tue Mar 23 21:08:14 2021 daemon.notice hostapd: wlan1: STA-OPMODE-MAX-BW-CHANGED d8:9c:67:ac:c4:b3 20
Tue Mar 23 21:09:34 2021 daemon.notice hostapd: wlan1: STA-OPMODE-MAX-BW-CHANGED d8:9c:67:ac:c4:b3 40
Tue Mar 23 21:09:36 2021 daemon.notice hostapd: wlan1: STA-OPMODE-MAX-BW-CHANGED d8:9c:67:ac:c4:b3 20
Tue Mar 23 21:10:34 2021 daemon.notice hostapd: wlan1: STA-OPMODE-MAX-BW-CHANGED d8:9c:67:ac:c4:b3 40
Tue Mar 23 21:56:43 2021 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 8c:f5:a3:a5:78:02
Tue Mar 23 21:56:43 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: disassociated due to inactivity
Tue Mar 23 21:56:44 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Mar 23 22:05:59 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: authenticated
Tue Mar 23 22:05:59 2021 daemon.notice hostapd: wlan0: STA-OPMODE-N_SS-CHANGED 8c:f5:a3:a5:78:02 2
Tue Mar 23 22:05:59 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: associated (aid 2)
Tue Mar 23 22:05:59 2021 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 8c:f5:a3:a5:78:02
Tue Mar 23 22:05:59 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 WPA: pairwise key handshake completed (RSN)
Tue Mar 23 22:06:00 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Tue Mar 23 22:06:00 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Tue Mar 23 22:06:00 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Tue Mar 23 22:06:00 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02 Galaxy-S7
Tue Mar 23 22:35:41 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3
Tue Mar 23 22:35:41 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3 JDonnell
Wed Mar 24 00:06:56 2021 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED a4:71:74:e9:90:33
Wed Mar 24 00:06:56 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: disassociated
Wed Mar 24 00:06:57 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Wed Mar 24 01:15:07 2021 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 8c:f5:a3:a5:78:02
Wed Mar 24 01:15:07 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: disassociated due to inactivity
Wed Mar 24 01:15:08 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Wed Mar 24 04:08:01 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3
Wed Mar 24 04:08:01 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3 JDonnell
Wed Mar 24 09:39:15 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3
Wed Mar 24 09:39:15 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3 JDonnell
Wed Mar 24 11:53:18 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: authenticated
Wed Mar 24 11:53:18 2021 daemon.notice hostapd: wlan0: STA-OPMODE-N_SS-CHANGED 8c:f5:a3:a5:78:02 2
Wed Mar 24 11:53:18 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: associated (aid 1)
Wed Mar 24 11:53:18 2021 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 8c:f5:a3:a5:78:02
Wed Mar 24 11:53:18 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 WPA: pairwise key handshake completed (RSN)
Wed Mar 24 11:53:22 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Wed Mar 24 11:53:22 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Wed Mar 24 11:53:22 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Wed Mar 24 11:53:22 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Wed Mar 24 11:53:22 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Wed Mar 24 11:53:22 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02 Galaxy-S7
Wed Mar 24 11:53:47 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: authenticated
Wed Mar 24 11:53:47 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: associated (aid 2)
Wed Mar 24 11:53:47 2021 daemon.notice hostapd: wlan0: AP-STA-CONNECTED a4:71:74:e9:90:33
Wed Mar 24 11:53:47 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 WPA: pairwise key handshake completed (RSN)
Wed Mar 24 11:53:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.157 a4:71:74:e9:90:33
Wed Mar 24 11:53:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.157 a4:71:74:e9:90:33 HUAWEI_P9
Wed Mar 24 11:53:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.157 a4:71:74:e9:90:33
Wed Mar 24 11:53:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.157 a4:71:74:e9:90:33 HUAWEI_P9
Wed Mar 24 13:31:24 2021 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED a4:71:74:e9:90:33
Wed Mar 24 13:31:24 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: disassociated
Wed Mar 24 13:31:25 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Wed Mar 24 13:31:33 2021 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED d8:9c:67:ac:c4:b3
Wed Mar 24 13:31:33 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 IEEE 802.11: disassociated
Wed Mar 24 13:31:34 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Wed Mar 24 14:03:29 2021 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 8c:f5:a3:a5:78:02
Wed Mar 24 14:03:29 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: disassociated due to inactivity
Wed Mar 24 14:03:30 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Wed Mar 24 14:08:57 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: authenticated
Wed Mar 24 14:08:57 2021 daemon.notice hostapd: wlan0: STA-OPMODE-N_SS-CHANGED 8c:f5:a3:a5:78:02 2
Wed Mar 24 14:08:57 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: associated (aid 1)
Wed Mar 24 14:08:57 2021 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 8c:f5:a3:a5:78:02
Wed Mar 24 14:08:57 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 WPA: pairwise key handshake completed (RSN)
Wed Mar 24 14:08:58 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Wed Mar 24 14:08:58 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Wed Mar 24 14:08:58 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Wed Mar 24 14:08:58 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02 Galaxy-S7
Wed Mar 24 16:25:29 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 IEEE 802.11: authenticated
Wed Mar 24 16:25:29 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 IEEE 802.11: associated (aid 1)
Wed Mar 24 16:25:29 2021 daemon.notice hostapd: wlan1: AP-STA-CONNECTED d8:9c:67:ac:c4:b3
Wed Mar 24 16:25:29 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 WPA: pairwise key handshake completed (RSN)
Wed Mar 24 16:25:32 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3
Wed Mar 24 16:25:32 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3 JDonnell
Wed Mar 24 16:35:31 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 WPA: group key handshake completed (RSN)
Wed Mar 24 16:36:36 2021 user.notice wan-check:: WAN interface failed. Restarting it.....
Wed Mar 24 16:36:37 2021 daemon.notice netifd: wan (14027): Stopping network wan
Wed Mar 24 16:36:37 2021 daemon.notice netifd: wan_4 (3534): udhcpc: received SIGTERM
Wed Mar 24 16:36:37 2021 daemon.notice netifd: wan_4 (3534): udhcpc: unicasting a release of 100.70.78.141 to 100.70.78.142
Wed Mar 24 16:36:37 2021 daemon.notice netifd: wan_4 (3534): udhcpc: sending release
Wed Mar 24 16:36:37 2021 daemon.notice netifd: wan_4 (3534): udhcpc: entering released state
Wed Mar 24 16:36:37 2021 daemon.notice netifd: wan_4 (3534): Command failed: Permission denied
Wed Mar 24 16:36:38 2021 daemon.notice netifd: Interface 'wan_4' is now down
Wed Mar 24 16:36:38 2021 daemon.debug dnsmasq[3330]: stopped listening on wwan0(#3): 100.70.78.141 port 53
Wed Mar 24 16:36:38 2021 daemon.notice netifd: Network alias '' link is down
Wed Mar 24 16:36:38 2021 daemon.notice netifd: Interface 'wan_4' has link connectivity loss
Wed Mar 24 16:36:38 2021 daemon.notice netifd: Interface 'wan_4' is disabled
Wed Mar 24 16:36:38 2021 daemon.warn dnsmasq[3330]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Wed Mar 24 16:36:39 2021 daemon.notice netifd: wan (14027): sending -> AT^NDISDUP=1,0
23.03.20213703Base systemBug ReportVery LowMediumCan't active Wirelessopenwrt-19.07Unconfirmed Task Description

- Device problem occurs on
Plusnet HomeHub
- Software versions of OpenWrt/LEDE release, packages, etc.
openwrt-19.07.7-lantiq-xrx200-bt_homehub-v5a-squashfs-sysupgrade.bin
- Steps to reproduce
Fresh installation, attempting to create a WAP, radio devices are always shown as inactive (see screenshot).

Have tried opkg update and logread reveals not very much:

Tue Mar 23 12:01:14 2021 daemon.info dnsmasq[1637]: read /etc/hosts - 4 addresses
Tue Mar 23 12:01:14 2021 daemon.info dnsmasq[1637]: read /tmp/hosts/odhcpd - 1 addresses
Tue Mar 23 12:01:14 2021 daemon.info dnsmasq[1637]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Tue Mar 23 12:01:14 2021 daemon.info dnsmasq-dhcp[1637]: read /etc/ethers - 0 addresses
Tue Mar 23 12:01:15 2021 daemon.info dnsmasq-dhcp[1637]: DHCPREQUEST(br-lan) 192.168.0.109 50:dc:e7:2c:46:79
Tue Mar 23 12:01:15 2021 daemon.info dnsmasq-dhcp[1637]: DHCPACK(br-lan) 192.168.0.109 50:dc:e7:2c:46:79
Tue Mar 23 12:13:32 2021 authpriv.info dropbear[1901]: Child connection from 192.168.0.10:62496
Tue Mar 23 12:13:33 2021 authpriv.notice dropbear[1901]: Auth succeeded with blank password for ‘root’ from 192.168.0.10:62496




23.03.20213702KernelBug ReportVery LowVery LowRansmit queue 0 timed out on Netgear R6220openwrt-19.07Unconfirmed Task Description

Device: Netgear R6220
OpenWRT version: 19.07.7 r11306-c4a6851c72
User installed packages: mwan3
Steps to reproduce: unknown, spotted error stack in kernel logs, so I share them.

[22934.015218] ------------[ cut here ]------------
[22934.024448] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:320 0x8038d700
[22934.038516] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
[22934.052393] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet
[22934.193603]  ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
[22934.277184] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.221 #0
[22934.289304] Stack : 00000000 00000000 00000000 87f65240 00000000 00000000 00000000 00000000
[22934.305940]         00000000 00000000 00000000 00000000 00000000 00000001 87c09d60 5326163c
[22934.322575]         87c09df8 00000000 00000000 00006358 00000038 8049e2b8 00000008 00000000
[22934.339205]         00000000 80550000 00043ac0 00000000 87c09d40 00000000 00000000 8050d500
[22934.355830]         8038d700 00000140 00000000 87f65240 00000000 802ae4c0 00000000 806b0000
[22934.372460]         ...
[22934.377324] Call Trace:
[22934.377402] [<8049e2b8>] 0x8049e2b8
[22934.389221] [<8038d700>] 0x8038d700
[22934.396160] [<802ae4c0>] 0x802ae4c0
[22934.403094] [<8000c1a0>] 0x8000c1a0
[22934.410030] [<8000c1a8>] 0x8000c1a8
[22934.416965] [<804870f4>] 0x804870f4
[22934.423891] [<80071e00>] 0x80071e00
[22934.430856] [<8002e798>] 0x8002e798
[22934.437794] [<8038d700>] 0x8038d700
[22934.444739] [<8002e820>] 0x8002e820
[22934.451679] [<8038d700>] 0x8038d700
[22934.458605] [<80099da0>] 0x80099da0
[22934.465544] [<8038d554>] 0x8038d554
[22934.472472] [<80088948>] 0x80088948
[22934.479418] [<80088c04>] 0x80088c04
[22934.486354] [<800794a8>] 0x800794a8
[22934.493285] [<804a50b8>] 0x804a50b8
[22934.500218] [<80033164>] 0x80033164
[22934.507148] [<8025b710>] 0x8025b710
[22934.514086] [<80007488>] 0x80007488
[22934.521012] 
[22934.524149] ---[ end trace f60c0fe92d06a467 ]---
[22934.533372] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
[22934.545708] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000065
[22934.557699] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=070d0000, max=0, ctx=183, dtx=183, fdx=182, next=183
[22934.578691] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=06060000, max=0, calc=1456, drx=1502
[22934.601287] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x45600f0c, 0x10c = 0x80818
[22934.615760] mtk_soc_eth 1e100000.ethernet: reset pse
[22934.631131] mtk_soc_eth 1e100000.ethernet: PPE started
22.03.20213701Base systemBug ReportVery LowHighDropbear in a crash loop TrunkUnconfirmed Task Description

Problem:
When i trying connect router by ssh i see error:

ssh: connect to host 192.168.1.1 port 22: Connection refused

OS / HW:

Model:	TP-Link TL-WR842N v5
Architecture:	MediaTek MT7628AN ver:1 eco:2
Firmware Version:	OpenWrt SNAPSHOT r16217-d7c8ca4d0b / LuCI Master git-21.081.27815-c385df1
Kernel Version:	5.4.105

Logs:

Mon Mar 22 12:04:39 2021 daemon.info procd: Instance dropbear::instance1 s in a crash loop 6 crashes, 0 seconds since last crash

I tried master and openwrt-21.02 branch. Same results.

My config:

CONFIG_TARGET_ramips=y
CONFIG_TARGET_ramips_mt76x8=y
CONFIG_TARGET_ramips_mt76x8_DEVICE_tplink_tl-wr842n-v5=y
CONFIG_BUSYBOX_CUSTOM=y
CONFIG_BUILD_PATENTED=y
CONFIG_BUSYBOX_CONFIG_ARP=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_ALLOW_EXEC is not set
# CONFIG_BUSYBOX_CONFIG_MKSWAP is not set
# CONFIG_BUSYBOX_CONFIG_SWAPOFF is not set
# CONFIG_BUSYBOX_CONFIG_SWAPON is not set
# CONFIG_BUSYBOX_CONFIG_VI is not set
CONFIG_CLEAN_IPKG=y
CONFIG_EXPERIMENTAL=y
# CONFIG_KERNEL_AIO is not set
# CONFIG_KERNEL_CGROUPS is not set
# CONFIG_KERNEL_ELF_CORE is not set
# CONFIG_KERNEL_FANOTIFY is not set
# CONFIG_KERNEL_FHANDLE is not set
# CONFIG_KERNEL_KEYS is not set
# CONFIG_KERNEL_NAMESPACES is not set
# CONFIG_KERNEL_SECCOMP is not set
# CONFIG_KERNEL_SWAP is not set
CONFIG_LIBCURL_COOKIES=y
CONFIG_LIBCURL_FTP=y
CONFIG_LIBCURL_HTTP=y
CONFIG_LIBCURL_NO_SMB="!"
CONFIG_LIBCURL_OPENSSL=y
CONFIG_LIBCURL_PROXY=y
CONFIG_LIBSODIUM_MINIMAL=y
CONFIG_LINUX_5_10=y
CONFIG_LUCI_SRCDIET=y
CONFIG_OPENSSL_ENGINE=y
CONFIG_OPENSSL_PREFER_CHACHA_OVER_GCM=y
CONFIG_OPENSSL_WITH_ASM=y
CONFIG_OPENSSL_WITH_CHACHA_POLY1305=y
CONFIG_OPENSSL_WITH_CMS=y
CONFIG_OPENSSL_WITH_DEPRECATED=y
CONFIG_OPENSSL_WITH_ERROR_MESSAGES=y
CONFIG_OPENSSL_WITH_PSK=y
CONFIG_OPENSSL_WITH_SRP=y
CONFIG_OPENSSL_WITH_TLS13=y
CONFIG_PACKAGE_cgi-io=y
CONFIG_PACKAGE_chat=y
CONFIG_PACKAGE_comgt=y
CONFIG_PACKAGE_curl=y
CONFIG_PACKAGE_htop=y
CONFIG_PACKAGE_ip-tiny=y
CONFIG_PACKAGE_ipset=y
CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
CONFIG_PACKAGE_iptables-mod-ipopt=y
CONFIG_PACKAGE_kmod-ipt-conntrack-extra=y
CONFIG_PACKAGE_kmod-ipt-ipopt=y
CONFIG_PACKAGE_kmod-ipt-ipset=y
CONFIG_PACKAGE_kmod-ipt-raw=y
CONFIG_PACKAGE_kmod-mii=y
CONFIG_PACKAGE_kmod-nfnetlink=y
CONFIG_PACKAGE_kmod-tun=y
CONFIG_PACKAGE_kmod-usb-acm=y
CONFIG_PACKAGE_kmod-usb-net=y
CONFIG_PACKAGE_kmod-usb-net-cdc-ether=y
CONFIG_PACKAGE_kmod-usb-serial=y
CONFIG_PACKAGE_kmod-usb-serial-option=y
CONFIG_PACKAGE_kmod-usb-serial-pl2303=y
CONFIG_PACKAGE_kmod-usb-serial-wwan=y
CONFIG_PACKAGE_libatomic=y
CONFIG_PACKAGE_libcares=y
CONFIG_PACKAGE_libcbor=y
CONFIG_PACKAGE_libcurl=y
CONFIG_PACKAGE_libev=y
CONFIG_PACKAGE_libevdev=y
CONFIG_PACKAGE_libfido2=y
CONFIG_PACKAGE_libipset=y
CONFIG_PACKAGE_libiwinfo-lua=y
CONFIG_PACKAGE_liblua=y
CONFIG_PACKAGE_liblucihttp=y
CONFIG_PACKAGE_liblucihttp-lua=y
CONFIG_PACKAGE_liblzo=y
CONFIG_PACKAGE_libmnl=y
CONFIG_PACKAGE_libncurses=y
CONFIG_PACKAGE_libopenssl=y
CONFIG_PACKAGE_libopenssl-conf=y
CONFIG_PACKAGE_librt=y
CONFIG_PACKAGE_libsodium=y
CONFIG_PACKAGE_libubus-lua=y
CONFIG_PACKAGE_libuci-lua=y
CONFIG_PACKAGE_libudev-zero=y
CONFIG_PACKAGE_libusb-1.0=y
CONFIG_PACKAGE_libustream-openssl=y
# CONFIG_PACKAGE_libustream-wolfssl is not set
# CONFIG_PACKAGE_libwolfssl is not set
CONFIG_PACKAGE_lua=y
CONFIG_PACKAGE_luci=y
CONFIG_PACKAGE_luci-app-firewall=y
CONFIG_PACKAGE_luci-app-opkg=y
CONFIG_PACKAGE_luci-base=y
CONFIG_PACKAGE_luci-compat=y
CONFIG_PACKAGE_luci-lib-base=y
CONFIG_PACKAGE_luci-lib-httpprotoutils=y
CONFIG_PACKAGE_luci-lib-ip=y
CONFIG_PACKAGE_luci-lib-jsonc=y
CONFIG_PACKAGE_luci-lib-nixio=y
CONFIG_PACKAGE_luci-mod-admin-full=y
CONFIG_PACKAGE_luci-mod-network=y
CONFIG_PACKAGE_luci-mod-status=y
CONFIG_PACKAGE_luci-mod-system=y
CONFIG_PACKAGE_luci-proto-3g=y
CONFIG_PACKAGE_luci-proto-ipv6=y
CONFIG_PACKAGE_luci-proto-ppp=y
CONFIG_PACKAGE_luci-theme-bootstrap=y
CONFIG_PACKAGE_nano=y
# CONFIG_PACKAGE_odhcp6c is not set
CONFIG_PACKAGE_odhcpd=y
# CONFIG_PACKAGE_odhcpd-ipv6only is not set
CONFIG_PACKAGE_odhcpd_full_ext_cer_id=0
CONFIG_PACKAGE_openssl-util=y
CONFIG_PACKAGE_rpcd=y
CONFIG_PACKAGE_rpcd-mod-file=y
CONFIG_PACKAGE_rpcd-mod-iwinfo=y
CONFIG_PACKAGE_rpcd-mod-luci=y
CONFIG_PACKAGE_rpcd-mod-rrdns=y
CONFIG_PACKAGE_terminfo=y
CONFIG_PACKAGE_uhttpd=y
CONFIG_PACKAGE_uhttpd-mod-ubus=y
CONFIG_PACKAGE_usb-modeswitch=y
CONFIG_PACKAGE_usbids=y
CONFIG_PACKAGE_usbutils=y
CONFIG_PACKAGE_wpad-basic=y
# CONFIG_PACKAGE_wpad-basic-wolfssl is not set
CONFIG_PACKAGE_zlib=y
CONFIG_STRIP_KERNEL_EXPORTS=y
# CONFIG_TARGET_ROOTFS_INITRAMFS is not set
CONFIG_TESTING_KERNEL=y
CONFIG_USE_MKLIBS=y
# CONFIG_WPA_WOLFSSL is not set
# CONFIG_LIBCURL_FILE is not set

22.03.20213700KernelBug ReportVery LowMediumWARNING: CPU: 0 PID: 840 at backports-5.10.16-1/net/mac...TrunkUnconfirmed Task Description

Supply the following if possible:
- newifiD2
- gcc version 8.4.0 (OpenWrt GCC 8.4.0 r15880-8d8125a43b
[16571.958211] ————[ cut here ]———— [16571.962917] WARNING: CPU: 0 PID: 840 at backports-5.10.16-1/net/mac80211/tx.c:955 ieee80211_proberesp_get+0x9dc/0xa28 [mac80211]
[16571.974474] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD xt_CT pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack_netlink nf_conntrack mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_recent xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY slhc nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip
[16571.974728] ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
[16572.082502] CPU: 0 PID: 840 Comm: mt76-tx phy1 Tainted: G W 5.4.106 #0
[16572.090296] Stack : 8e89bda4 8007d508 806a0000 806a4994 80710000 806a495c 806a3ab0 8e89bc1c
[16572.098631] 80840000 8ff379c4 806eed03 80638c50 00000000 00000001 8e89bbc0 9e4229cd
[16572.106965] 00000000 00000000 80880000 00000000 30232036 000003bb 20202020 2e352020
[16572.115298] 00000000 00000338 00000000 00014246 00000000 80710000 00000000 8ef35b90
[16572.123631] 00000009 0000001b 8e89bda8 8edf8c20 00000000 80342e8c 00000000 80840000
[16572.131964] ...
[16572.134402] Call Trace:
[16572.136863] [<8000b64c>] show_stack+0×30/0×100 [16572.141298] [<8057dd80>] dump_stack+0xa4/0xdc
[16572.145653] [<8002bfe8>] warn+0xc0/0x10c
[16572.149738] [<8002c090>] warn_slowpath_fmt+0x5c/0xac
[16572.154807] [<8ef35b90>] ieee80211_proberesp_get+0x9dc/0xa28 [mac80211]
[16572.161622] —[ end trace 79d7d105bb818706 ]— [16572.667050] ————[ cut here ]———— [16572.671880] WARNING: CPU: 0 PID: 840 at backports-5.10.16-1/net/mac80211/tx.c:955 ieee80211_proberesp_get+0x9dc/0xa28 [mac80211]
[16572.683450] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD xt_CT pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack_netlink nf_conntrack mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_recent xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY slhc nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip
[16572.683640] ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
[16572.791477] CPU: 0 PID: 840 Comm: mt76-tx phy1 Tainted: G W 5.4.106 #0
[16572.799273] Stack : 8e89bda4 8007d508 806a0000 806a4994 80710000 806a495c 806a3ab0 8e89bc1c
[16572.807610] 80840000 8ff379c4 806eed03 80638c50 00000000 00000001 8e89bbc0 9e4229cd
[16572.815944] 00000000 00000000 80880000 00000000 30232036 000003cd 20202020 2e352020
[16572.824277] 00000000 00000338 00000000 000c13b5 00000000 80710000 00000000 8ef35b90
[16572.832608] 00000009 0000001b 8e89bda8 8edf8c20 00000000 80342e8c 00000000 80840000
[16572.840941] ...
[16572.843380] Call Trace:
[16572.845850] [<8000b64c>] show_stack+0×30/0×100 [16572.850290] [<8057dd80>] dump_stack+0xa4/0xdc
[16572.854651] [<8002bfe8>]
warn+0xc0/0x10c
[16572.858737] [<8002c090>] warn_slowpath_fmt+0x5c/0xac
[16572.863851] [<8ef35b90>] ieee80211_proberesp_get+0x9dc/0xa28 [mac80211]
[16572.870681] —[ end trace 79d7d105bb818707 ]— [16572.875324] ————[ cut here ]———— [16572.880024] WARNING: CPU: 0 PID: 840 at backports-5.10.16-1/net/mac80211/tx.c:955 ieee80211_proberesp_get+0x9dc/0xa28 [mac80211]
[16572.891588] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD xt_CT pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack_netlink nf_conntrack mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_recent xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY slhc nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip
[16572.891843] ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
[16572.999618] CPU: 0 PID: 840 Comm: mt76-tx phy1 Tainted: G W 5.4.106 #0
[16573.007411] Stack : 8e89bda4 8007d508 806a0000 806a4994 80710000 806a495c 806a3ab0 8e89bc1c
[16573.015747] 80840000 8ff379c4 806eed03 80638c50 00000000 00000001 8e89bbc0 9e4229cd
[16573.024081] 00000000 00000000 80880000 00000000 30232036 000003df 20202020 2e352020
[16573.032414] 00000000 00000338 00000000 000f40c2 00000000 80710000 00000000 8ef35b90
[16573.040746] 00000009 0000001b 8e89bda8 8edf8c20 00000000 80342e8c 00000000 80840000
[16573.049078] ...
[16573.051517] Call Trace:
[16573.053979] [<8000b64c>] show_stack+0×30/0×100 [16573.058416] [<8057dd80>] dump_stack+0xa4/0xdc
[16573.062770] [<8002bfe8>] __warn+0xc0/0x10c
[16573.066856] [<8002c090>] warn_slowpath_fmt+0x5c/0xac
[16573.071928] [<8ef35b90>] ieee80211_proberesp_get+0x9dc/0xa28 [mac80211]
[16573.078762] —[ end trace 79d7d105bb818708 ]— [16573.083406] ————[ cut here ]————


21.03.20213699Base systemBug ReportVery LowLow MT7620 platform with spi flash has very low read & wri...TrunkUnconfirmed Task Description

Device: Youku YK-L1(in fact I believe in all mt7620, rt3883, rt305x devices)
Software versions: v19.07
Problem: YK-L1 has a 32 MB flash chip and device has very poor flash read and write performance. It will need 10 minutes to format filesystem after install OpenWrt.
Reason: In kernel config file(/target/linux/ramips/mt7620/config-xxx) it defined CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y. But MT7621 and MT7628 do not has this define. So one block is only 4 KB in MT7620 but 64 KB in MT7628/MT7621. MT7628 is much faster than MT7620 in the same spi frequency.
I do not know why we use 4K sectors in these platform because it seems like won’t waste storage space by set block size to 64 KB.

Here is a rt5350 device and we can see erasesize is 4 KB, same as mt7620.
root@OpenWrt:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00020000 00001000 “u-boot” mtd1: 00010000 00001000 “factory” mtd2: 003d0000 00001000 “firmware” mtd3: 0013891e 00001000 “kernel” mtd4: 002976e2 00001000 “rootfs” mtd5: 00039000 00001000 “rootfs_data”

21.03.20213698ToolchainBug ReportVery LowLowx86 EFI image GUID Partition Table (GPT) is corruptTrunkUnconfirmed Task Description

If you use `fdisk` to check an OpenWrt image of x86_64 EFI, you will get an error message:

$ fdisk -l openwrt-x86-64-generic-ext4-combined-efi.img
GPT PMBR size mismatch (246303 != 246334) will be corrected by write.
The backup GPT table is corrupt, but the primary appears OK, so that will be used.
The backup GPT table is not on the end of the device. This problem will be corrected by write.
...
  • No matter what size the image are, the PMBR size is always 31 less than real value.
  • There is no secondary partition table at the end of the image.
  • The Backup LBA (offset of image file: 0×220) and Last usable LBA (0×230) values are wrong.

This doesn’t hurt the boot or the usage of OpenWrt x86. However this is NOT a correct way.

According the git history, these EFI support is introduced in this commit 1963bba. And it disabled the secondary partition table.
In the commit message, this incorret operation is ‘to reduce size’. However, this secondary partition table, which has 33 LBAs, takes only 16.5 KiB. I don’t think 16.5 KiB is worth to ‘save’ for an x86_64 device.
Besides, in the commit message the author said ‘This may cause problems when generate vmdk images or vdi images. We have to pad enough sectors when generate these images.’ So, this ‘reduce size’ operation also has side effects, and is not a good tradeoff.

As a conclusion, I hope this problem can be fixed.

20.03.20213696Base systemBug ReportVery LowLowWindows devices can't get IPv6 from DHCPv6 TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on:

   WRT2300ACM

- Software versions of OpenWrt/LEDE release, packages, etc.

   All the latest versions from trunk.

- Steps to reproduce

  1. Add a Windows device to lan
  2. Set the Lease Time to 4h in Luci
  3. Renew the IPv6 lease in the windows device
  4. The device can’t get an IPv6 (trough DHCP) anymore

More useful information:

  • If you restore the lease time to 12h Windows can get an IPv6 address again.
  • My LG webos TV can get an IPv6 address with the short lease, but my ubuntu machine cannot, same as windows.
  • The information we get from the windows logs is:
    1. Solicit is sent from the interface 11. Status code is 0×0
    2. Message is Invalid and it is discarded
  • The windows device still gets an IPv6 address via RA.
  • In the logs odhcpd shows that it receives the solicitation and responds adequately.
19.03.20213692Base systemBug ReportVery LowLowReduce fw3 warnings when both IPv4 and IPv6 are in useTrunkUnconfirmed Task Description

When the same rule uses both IPv4 and IPv6 addresses, fw3 shows a bunch of warnings.

 * Populating IPv4 filter table
   * Rule 'xxx-UDP'
     ! Skipping due to different family of ip address
     ! Skipping due to different family of ip address
 * Populating IPv6 filter table
   * Rule 'xxx-UDP'
     ! Skipping due to different family of ip address
     ! Skipping due to different family of ip address

I suggest to remove that warning or only show it when the family is specified and it does not match.
There is no reason to show that when family is ‘any’.

With too much noise, an important warning messaged might be missed.

19.03.20213691Base systemBug ReportVery LowLowopkg_download_pkg: Package luci is not available from a...openwrt-19.07Unconfirmed Task Description

Software versions: openwrt-19.07.7-brcm63xx-generic-HG553-squashfs-cfe.bin
Device: Huawei EchoLife HG553

I flashed OpenWrt from vertion 18.06 to 19.07.7 while keeping the configuration.
LuCI stopped working.
When I tried to reinstall it, I saw this message:

# opkg install luci
Collected errors:
 * opkg_download_pkg: Package luci is not available from any configured src.
 * opkg_install_pkg: Failed to download luci. Perhaps you need to run 'opkg update'?
 * opkg_install_cmd: Cannot install package luci.

After flashing to 19.07.7 with clean configuration the problem was gone.

But it is still easily reproducible with:

# opkg update
# opkg install --force-reinstall luci
Removing package luci from root...
[...]
Collected errors:
 * opkg_download_pkg: Package luci is not available from any configured src.
 * opkg_install_pkg: Failed to download luci. Perhaps you need to run 'opkg update'?
 * opkg_install_cmd: Cannot install package luci.

and luci package stays broken after this (which should not happen).

19.03.20213690Base systemBug ReportVery LowMedium6in4 interfaces creation sometimes stuck in an infinite...TrunkUnconfirmed Task Description

Router: Linksys WRT1900AC v2
OpenWrt version: SNAPSHOT r16134-c6652a7c94
netifd version: 2021-01-09-c00c8335-1

I have set up multiple 6in4 interfaces for testing, but sometimes some interface won’t come up.
The system log is flooded with errors like these:

Fri Mar 19 20:32:58 2021 daemon.notice netifd: Interface 'wan6_4' is setting up now
Fri Mar 19 20:32:58 2021 daemon.notice netifd: wan6_4 (13717): Command failed: Unknown error
Fri Mar 19 20:32:58 2021 daemon.notice netifd: Interface 'wan6_4' is now down
Fri Mar 19 20:32:58 2021 daemon.notice netifd: Interface 'wan6_4' is setting up now
Fri Mar 19 20:32:58 2021 daemon.notice netifd: wan6_4 (13770): Command failed: Unknown error
Fri Mar 19 20:32:58 2021 daemon.notice netifd: Interface 'wan6_4' is now down
Fri Mar 19 20:32:58 2021 daemon.notice netifd: Interface 'wan6_4' is setting up now
Fri Mar 19 20:32:58 2021 daemon.notice netifd: wan6_4 (13794): Command failed: Unknown error
Fri Mar 19 20:32:58 2021 daemon.notice netifd: Interface 'wan6_4' is now down
Fri Mar 19 20:32:58 2021 daemon.notice netifd: Interface 'wan6_4' is setting up now
Fri Mar 19 20:32:58 2021 daemon.notice netifd: wan6_4 (13847): Command failed: Unknown error
Fri Mar 19 20:32:58 2021 daemon.notice netifd: Interface 'wan6_4' is now down
Fri Mar 19 20:32:58 2021 daemon.notice netifd: Interface 'wan6_4' is setting up now
Fri Mar 19 20:32:58 2021 daemon.notice netifd: wan6_4 (13871): Command failed: Unknown error
Fri Mar 19 20:32:58 2021 daemon.notice netifd: Interface 'wan6_4' is now down

And it also hogs CPU.

An workaround is manually remove the tunnel with iproute2, then restart the interface:

ip tun del 6in4-wan6_4
ifup wan6_4
18.03.20213689KernelBug ReportVery LowLowBPI R64 MT7622 I2S audio supportTrunkUnconfirmed Task Description

Supply the following if possible:

- Device problem occurs on
Bananapi BPI R64

- Software versions of OpenWrt/LEDE release, packages, etc.
Latest OpenWrt snapshot

- Steps to reproduce
according to forumExternal Link and wikiExternal Link

I have edited the dts file and flash it to emmc, but got error, no alsa device

[    0.723692] i2c-core: driver [wm8960] registered; 
[    0.729266] mt2701-wm8960 sound: ASoC: failed to init link wm8960-codec: -517 
[    0.736405] mt2701-wm8960 sound: mt2701_wm8960_machine_probe snd_soc_register_card fail -517
 


16.03.20213686Base systemBug ReportVery LowCriticalBelkin F9K1115 v2 - boot loop with 21.02 snapshotopenwrt-21.02Unconfirmed Task Description

Boot loop, no communication with the router after upgrade to 21.02 snapshot (tested r15866).

Upgrade from Belkin web UI (factory image) is not working.

Probably migration to the new ath79 architecture is not correct:
- https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=563ece8a85dad24e8c3ce55af51938a4d37405f0 - https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=b403a6e1241c00f509b201ec2ac8ca5f29e1ffd1

16.03.20213685Base systemBug ReportVery LowLowaudio buzzy with 19.07.07openwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

TP-Link TL-WDR3600 v1
USB SoundBlaster
external sd on /mnt/sda1

- Software versions of OpenWrt/LEDE release, packages, etc.

OpenWrt 19.07.7 r11306-c4a6851c72 / LuCI openwrt-19.07 branch git-21.044.30835-34e0d65
# uname -a
Linux b2 4.14.221 #0 Mon Feb 15 15:22:37 2021 mips GNU/Linux
# opkg list | grep -e alsa -e audio -e mpd
alsa-lib - 1.1.8-1
alsa-utils - 1.1.7-1
kmod-usb-audio - 4.14.221-1
libmpdclient - 2.18-1
mpd-mini - 0.21.25-1

# alsactl init
Found hardware: “USB-Audio” “USB Mixer” “USB041e:3249” “” “” Hardware is initialized using a generic method

- Steps to reproduce

alsactl init
alsactl restore ...
start mpd
play song

in addition to the sound there is a choppy buzz. Workaround is to repeat the above.

Setup was fine before upgrade from (19.07.5)

15.03.20213684Base systemBug ReportVery LowLowiPhone regularly takes down wifi for all clientsTrunkUnconfirmed Task Description

I have two APs: ASUS RT-ACRH13 and Linksys EA8300. They are both running OpenWrt 21.02-SNAPSHOT r15879-3b6c93298c. Over the past week, the wifi has gone down regularly for all clients. A network restart or reboot brings wifi back. I have started capturing the system log and I noticed that the random MAC used by my work iPhone (e2:41:65:b2:93:16) is the last client that hostapd logs before things go bad. I have disabled wifi on the iPhone and am now monitoring to see if the problem persists.

RT-ACRH13

Fri Mar 12 21:31:37 2021 daemon.notice hostapd: wlan0: AP-STA-POSSIBLE-PSK-MISMATCH e2:41:65:b2:93:16
Fri Mar 12 21:31:38 2021 kern.warn kernel: [188414.593384] ath10k_ahb a800000.wifi: could not get mac80211 beacon, vdev_id: 0 addr: 70:4d:7b:XX:XX:XX
Fri Mar 12 21:31:38 2021 daemon.notice netifd: Network device 'wlan1' link is down
Fri Mar 12 21:31:38 2021 kern.info kernel: [188414.597425] br-lan: port 3(wlan1) entered disabled state
Fri Mar 12 21:31:38 2021 kern.warn kernel: [188414.695768] ath10k_ahb a800000.wifi: could not get mac80211 beacon, vdev_id: 0 addr: 70:4d:7b:XX:XX:XX
Fri Mar 12 21:31:38 2021 kern.info kernel: [188414.708986] ath10k_ahb a800000.wifi: mac flush null vif, drop 0 queues 0xffff
Fri Mar 12 21:31:38 2021 kern.info kernel: [188414.840904] ath10k_ahb a000000.wifi: mac flush null vif, drop 0 queues 0xffff
Fri Mar 12 21:31:38 2021 daemon.notice netifd: radio0 (8663): Command failed: Not found
Fri Mar 12 21:31:38 2021 daemon.notice netifd: radio1 (8664): Command failed: Not found
Fri Mar 12 21:31:38 2021 kern.warn kernel: [188415.073934] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
Fri Mar 12 21:31:38 2021 kern.warn kernel: [188415.074039] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
Fri Mar 12 21:31:38 2021 daemon.notice netifd: Network device 'wlan0' link is down
Fri Mar 12 21:31:38 2021 kern.info kernel: [188415.083250] br-lan: port 2(wlan0) entered disabled state
Fri Mar 12 21:31:38 2021 kern.warn kernel: [188415.090999] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
Fri Mar 12 21:31:38 2021 kern.warn kernel: [188415.091991] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
Fri Mar 12 21:31:38 2021 kern.info kernel: [188415.102021] br-lan: port 3(wlan1) entered disabled state
Fri Mar 12 21:31:38 2021 daemon.debug dnsmasq[970]: stopped listening on wlan1(#27): fe80::724d:7bff:feXX:XXXX%wlan1 port 53
Fri Mar 12 21:31:38 2021 daemon.debug dnsmasq[970]: stopped listening on wlan0(#26): fe80::724d:7bff:feXX:XXXX%wlan0 port 53
Fri Mar 12 21:31:38 2021 kern.info kernel: [188415.173683] device wlan0 left promiscuous mode
Fri Mar 12 21:31:38 2021 kern.info kernel: [188415.173981] br-lan: port 2(wlan0) entered disabled state
Fri Mar 12 21:31:39 2021 kern.info kernel: [188415.354206] device wlan1 left promiscuous mode
Fri Mar 12 21:31:39 2021 kern.info kernel: [188415.354496] br-lan: port 3(wlan1) entered disabled state
EA8300

Sat Mar 13 17:35:55 2021 daemon.err hostapd: nl80211: kernel reports: key addition failed
Sat Mar 13 17:35:55 2021 daemon.notice hostapd: wlan2: STA-OPMODE-N_SS-CHANGED e2:41:65:b2:93:16 2
Sat Mar 13 17:35:55 2021 daemon.info hostapd: wlan2: STA e2:41:65:b2:93:16 IEEE 802.11: associated (aid 6)
Sat Mar 13 17:35:55 2021 daemon.notice hostapd: wlan2: AP-STA-CONNECTED e2:41:65:b2:93:16
Sat Mar 13 17:35:55 2021 daemon.notice hostapd: wlan1: Prune association for e2:41:65:b2:93:16
Sat Mar 13 17:35:55 2021 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED e2:41:65:b2:93:16
Sat Mar 13 17:36:01 2021 daemon.err hostapd: nl80211: kernel reports: key addition failed
Sat Mar 13 17:36:01 2021 daemon.info hostapd: wlan1: STA e2:41:65:b2:93:16 IEEE 802.11: associated (aid 2)
Sat Mar 13 17:36:01 2021 daemon.notice hostapd: wlan1: AP-STA-CONNECTED e2:41:65:b2:93:16
Sat Mar 13 17:36:01 2021 daemon.notice hostapd: wlan2: Prune association for e2:41:65:b2:93:16
Sat Mar 13 17:36:01 2021 daemon.notice hostapd: wlan2: AP-STA-DISCONNECTED e2:41:65:b2:93:16
Sat Mar 13 17:36:31 2021 daemon.info hostapd: wlan2: STA e2:41:65:b2:93:16 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Sat Mar 13 17:45:36 2021 daemon.info hostapd: wlan2: STA e2:41:65:b2:93:16 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Sat Mar 13 17:46:49 2021 daemon.info hostapd: wlan2: STA e2:41:65:b2:93:16 IEEE 802.11: authenticated
Sat Mar 13 17:46:49 2021 daemon.notice hostapd: wlan2: STA-OPMODE-N_SS-CHANGED e2:41:65:b2:93:16 2
Sat Mar 13 17:46:49 2021 daemon.info hostapd: wlan2: STA e2:41:65:b2:93:16 IEEE 802.11: associated (aid 6)
Sat Mar 13 17:46:49 2021 daemon.notice hostapd: wlan1: Prune association for e2:41:65:b2:93:16
Sat Mar 13 17:46:49 2021 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED e2:41:65:b2:93:16
Sat Mar 13 17:46:58 2021 daemon.info hostapd: wlan2: STA e2:41:65:b2:93:16 IEEE 802.11: deauthenticated due to local deauth request
Sat Mar 13 17:47:19 2021 daemon.info hostapd: wlan1: STA e2:41:65:b2:93:16 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Sat Mar 13 17:48:03 2021 daemon.info hostapd: wlan2: STA e2:41:65:b2:93:16 IEEE 802.11: authenticated
Sat Mar 13 17:48:03 2021 daemon.notice hostapd: wlan2: STA-OPMODE-N_SS-CHANGED e2:41:65:b2:93:16 2
Sat Mar 13 17:48:03 2021 daemon.info hostapd: wlan2: STA e2:41:65:b2:93:16 IEEE 802.11: associated (aid 6)
Sat Mar 13 17:48:03 2021 daemon.notice hostapd: wlan2: AP-STA-POSSIBLE-PSK-MISMATCH e2:41:65:b2:93:16
Sat Mar 13 17:48:04 2021 kern.info kernel: [72106.874123] br-lan: port 4(wlan1) entered disabled state
Sat Mar 13 17:48:04 2021 daemon.notice netifd: Network device 'wlan1' link is down
Sat Mar 13 17:48:04 2021 kern.warn kernel: [72106.912253] ath10k_ahb a000000.wifi: could not get mac80211 beacon, vdev_id: 0 addr: 58:ef:68:XX:XX:XX
Sat Mar 13 17:48:04 2021 kern.info kernel: [72106.933538] ath10k_ahb a000000.wifi: mac flush null vif, drop 0 queues 0xffff
Sat Mar 13 17:48:04 2021 kern.warn kernel: [72106.986914] ath10k_ahb a800000.wifi: could not get mac80211 beacon, vdev_id: 0 addr: 58:ef:68:XX:XX:XX
Sat Mar 13 17:48:04 2021 kern.info kernel: [72106.996480] ath10k_pci 0000:01:00.0: mac flush null vif, drop 0 queues 0xffff
Sat Mar 13 17:48:04 2021 kern.info kernel: [72107.000694] ath10k_ahb a800000.wifi: mac flush null vif, drop 0 queues 0xffff
Sat Mar 13 17:48:05 2021 daemon.notice netifd: radio0 (5235): Command failed: Not found
Sat Mar 13 17:48:05 2021 daemon.notice netifd: radio1 (5236): Command failed: Not found
Sat Mar 13 17:48:05 2021 daemon.notice netifd: radio2 (5237): Command failed: Not found
Sat Mar 13 17:48:05 2021 kern.warn kernel: [72107.622822] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
Sat Mar 13 17:48:05 2021 kern.warn kernel: [72107.622928] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
Sat Mar 13 17:48:05 2021 kern.info kernel: [72107.635916] br-lan: port 4(wlan1) entered disabled state
Sat Mar 13 17:48:05 2021 kern.warn kernel: [72107.640482] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
Sat Mar 13 17:48:05 2021 kern.warn kernel: [72107.640688] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
Sat Mar 13 17:48:05 2021 daemon.notice netifd: Network device 'wlan2' link is down
Sat Mar 13 17:48:05 2021 kern.info kernel: [72107.654594] br-lan: port 3(wlan2) entered disabled state
Sat Mar 13 17:48:05 2021 kern.warn kernel: [72107.659629] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
Sat Mar 13 17:48:05 2021 kern.warn kernel: [72107.659672] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
Sat Mar 13 17:48:05 2021 daemon.notice netifd: Network device 'wlan0' link is down
Sat Mar 13 17:48:05 2021 kern.info kernel: [72107.763341] br-lan: port 2(wlan0) entered disabled state
Sat Mar 13 17:48:05 2021 kern.info kernel: [72107.814720] device wlan1 left promiscuous mode
Sat Mar 13 17:48:05 2021 kern.info kernel: [72107.815010] br-lan: port 4(wlan1) entered disabled state
Sat Mar 13 17:48:05 2021 kern.info kernel: [72107.989304] device wlan2 left promiscuous mode
Sat Mar 13 17:48:05 2021 kern.info kernel: [72107.989350] br-lan: port 3(wlan2) entered disabled state
Sat Mar 13 17:48:06 2021 kern.info kernel: [72108.184159] device wlan0 left promiscuous mode
Sat Mar 13 17:48:06 2021 kern.info kernel: [72108.184445] br-lan: port 2(wlan0) entered disabled state
Sat Mar 13 17:48:06 2021 daemon.debug dnsmasq[880]: stopped listening on wlan2(#19): fe80::5aef:68ff:feXX:XXXX port 53
Sat Mar 13 17:48:06 2021 daemon.debug dnsmasq[880]: stopped listening on wlan1(#20): fe80::5aef:68ff:feXX:XXXX port 53
Sat Mar 13 17:48:06 2021 daemon.debug dnsmasq[880]: stopped listening on wlan0(#18): fe80::58ef:68ff:feXX:XXXX port 53
EA8300

Mon Mar 15 11:45:55 2021 daemon.notice hostapd: wlan1: STA e2:41:65:b2:93:16 IEEE 802.11: did not acknowledge authentication response
Mon Mar 15 11:50:55 2021 daemon.info hostapd: wlan1: STA e2:41:65:b2:93:16 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Mon Mar 15 11:51:17 2021 daemon.info hostapd: wlan1: STA e2:41:65:b2:93:16 IEEE 802.11: authenticated
Mon Mar 15 11:51:17 2021 daemon.info hostapd: wlan1: STA e2:41:65:b2:93:16 IEEE 802.11: associated (aid 5)
Mon Mar 15 11:51:17 2021 daemon.notice hostapd: wlan0: Prune association for e2:41:65:b2:93:16
Mon Mar 15 11:51:17 2021 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED e2:41:65:b2:93:16
Mon Mar 15 11:51:23 2021 daemon.info hostapd: wlan0: STA e2:41:65:b2:93:16 IEEE 802.11: authenticated
Mon Mar 15 11:51:23 2021 daemon.info hostapd: wlan0: STA e2:41:65:b2:93:16 IEEE 802.11: associated (aid 5)
Mon Mar 15 11:51:23 2021 daemon.notice hostapd: wlan0: AP-STA-POSSIBLE-PSK-MISMATCH e2:41:65:b2:93:16
Mon Mar 15 11:51:25 2021 daemon.notice netifd: Network device 'wlan0' link is down
Mon Mar 15 11:51:25 2021 kern.info kernel: [147350.898385] br-lan: port 4(wlan0) entered disabled state
Mon Mar 15 11:51:25 2021 kern.info kernel: [147350.961869] ath10k_pci 0000:01:00.0: mac flush null vif, drop 0 queues 0xffff
Mon Mar 15 11:51:25 2021 kern.warn kernel: [147351.052484] ath10k_ahb a000000.wifi: could not get mac80211 beacon, vdev_id: 0 addr: 58:ef:68:XX:XX:XX
Mon Mar 15 11:51:25 2021 kern.info kernel: [147351.056808] ath10k_ahb a000000.wifi: mac flush null vif, drop 0 queues 0xffff
Mon Mar 15 11:51:25 2021 kern.warn kernel: [147351.224554] ath10k_ahb a800000.wifi: could not get mac80211 beacon, vdev_id: 0 addr: 58:ef:68:XX:XX:XX
Mon Mar 15 11:51:25 2021 kern.info kernel: [147351.263288] ath10k_ahb a800000.wifi: mac flush null vif, drop 0 queues 0xffff
Mon Mar 15 11:51:25 2021 daemon.notice netifd: radio1 (6268): Command failed: Not found
Mon Mar 15 11:51:25 2021 daemon.notice netifd: radio0 (6269): Command failed: Not found
Mon Mar 15 11:51:25 2021 kern.warn kernel: [147351.589027] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
Mon Mar 15 11:51:25 2021 kern.warn kernel: [147351.589150] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
Mon Mar 15 11:51:25 2021 daemon.notice netifd: radio2 (6270): Command failed: Not found
Mon Mar 15 11:51:25 2021 daemon.notice netifd: Network device 'wlan2' link is down
Mon Mar 15 11:51:25 2021 kern.info kernel: [147351.624521] br-lan: port 3(wlan2) entered disabled state
Mon Mar 15 11:51:25 2021 kern.warn kernel: [147351.631381] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
Mon Mar 15 11:51:25 2021 kern.warn kernel: [147351.631479] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
Mon Mar 15 11:51:25 2021 daemon.notice netifd: Network device 'wlan1' link is down
Mon Mar 15 11:51:25 2021 kern.info kernel: [147351.679190] br-lan: port 2(wlan1) entered disabled state
Mon Mar 15 11:51:25 2021 kern.warn kernel: [147351.686048] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
Mon Mar 15 11:51:25 2021 kern.warn kernel: [147351.686183] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
Mon Mar 15 11:51:25 2021 daemon.debug dnsmasq[882]: stopped listening on wlan0(#19): fe80::58ef:68ff:feXX:XXXX%wlan0 port 53
Mon Mar 15 11:51:25 2021 daemon.debug dnsmasq[882]: stopped listening on wlan1(#18): fe80::5aef:68ff:feXX:XXXX%wlan1 port 53
Mon Mar 15 11:51:25 2021 daemon.debug dnsmasq[882]: stopped listening on wlan2(#17): fe80::5aef:68ff:feXX:XXXX%wlan2 port 53
Mon Mar 15 11:51:25 2021 kern.info kernel: [147351.791859] br-lan: port 4(wlan0) entered disabled state
Mon Mar 15 11:51:25 2021 kern.info kernel: [147351.841987] device wlan2 left promiscuous mode
Mon Mar 15 11:51:25 2021 kern.info kernel: [147351.842276] br-lan: port 3(wlan2) entered disabled state
Mon Mar 15 11:51:26 2021 kern.info kernel: [147352.017865] device wlan1 left promiscuous mode
Mon Mar 15 11:51:26 2021 kern.info kernel: [147352.017914] br-lan: port 2(wlan1) entered disabled state
Mon Mar 15 11:51:26 2021 kern.info kernel: [147352.162021] device wlan0 left promiscuous mode
Mon Mar 15 11:51:26 2021 kern.info kernel: [147352.162311] br-lan: port 4(wlan0) entered disabled state
/etc/config/wireless for both

config wifi-device 'radioX'
    option type 'mac80211'
    option hwmode '...' # e.g. 11a
    option path '...'
    option htmode '...' # e.g. VHT80
    option channel '...' # e.g. 149
    option country 'US'
    option txpower '...' # e.g. 23
    option cell_density '0'

config wifi-iface 'default_radioX'
    option device 'radioX'
    option network 'lan'
    option mode 'ap'
    option key 'XXX'
    option ieee80211r '1'
    option ft_psk_generate_local '1'
    option ssid 'XXX'
    option encryption 'psk2+ccmp'
    option ieee80211w '1'
    # https://forum.openwrt.org/t/802-11r-broken-in-recent-master-nl80211-attr-sta-vlan-errors/88888/3
    option ft_over_ds '0'
15.03.20213683Base systemBug ReportVery LowLowjsonfilter yields unreliable resultsopenwrt-19.07Unconfirmed Task Description

- Device is an Arcadyan VGV7510KW22 (o2 Box 6431)
- Box software version is OpenWrt 19.07-SNAPSHOT, r11318-c64742a96e
- Problem shows up in package wireguard_tool which provides script wireguard_watchdog” which uses jsonfilter.
- Short steps to reproduce:

* Use attached file jinp1 as input and run this command:

  jsonfilter -a -e '@[@.proto="wireguard"].interface'  <jout1
  => nothing is output (empty output), which is incorrect

* Now use attached file jinp2, which is jinp1 with lines slighty reordered:

  jsonfilter -a -e '@[@.proto="wireguard"].interface'  <jout2
  => "wgvpn" is output, which is correct, this time.

- Background: Script wireguard_watchdog tries to identify the WireGuard network interfaces.

To this end it runs these commands:
<code>ubus -S call network.interface dump | jsonfilter -e '@.interface[@.up=true]' | jsonfilter -a -e '@[@.proto="wireguard"].interface'</code>
The second jsonfilter call in this line erroneously does not show a result.
 The attached files jinp1, jinp2 contain example input for the 2nd jsonfilter call


13.03.20213682Base systemBug ReportVery LowMediumDFS Scan does not work with R7800 and SnapshotTrunkUnconfirmed Task Description

- Netgear R7800
- OpenWrt SNAPSHOT r16174-9530b9bb78 / LuCI Master git-21.060.51374-cd06e70
- Simply try to activate 160Mhz mode for WLAN0

 

Error is marked below. Start of DFS scan failed. Worked fine in stable 19.07.7

Sat Mar 13 13:56:02 2021 daemon.notice netifd: Network device ‘tap_vpn’ link is up
Sat Mar 13 13:56:02 2021 daemon.notice netifd: Interface ‘VPN’ has link connectivity
Sat Mar 13 13:56:02 2021 daemon.debug dnsmasq[3234]: stopped listening on ifb4eth0.2(#17): fe80::446d:ecff:fe53:d19d port 53
Sat Mar 13 13:56:02 2021 daemon.debug dnsmasq[3234]: listening on tap_vpn(#21): 192.168.177.6 port 53
Sat Mar 13 13:56:02 2021 kern.info kernel: [ 46.882314] br-lan: port 4(wlan1) entered blocking state
Sat Mar 13 13:56:02 2021 kern.info kernel: [ 46.882341] br-lan: port 4(wlan1) entered disabled state
Sat Mar 13 13:56:02 2021 kern.info kernel: [ 46.887211] device wlan1 entered promiscuous mode
Sat Mar 13 13:56:02 2021 daemon.notice hostapd: wlan1: interface state UNINITIALIZED→COUNTRY_UPDATE
Sat Mar 13 13:56:02 2021 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Sat Mar 13 13:56:02 2021 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE→ACS
Sat Mar 13 13:56:02 2021 daemon.notice hostapd: wlan1: ACS-STARTED
Sat Mar 13 13:56:02 2021 daemon.notice hostapd: wlan0: interface state HT_SCAN→DFS
Sat Mar 13 13:56:02 2021 daemon.notice hostapd: wlan0: DFS-CAC-START freq=5180 chan=36 sec_chan=1, width=2, seg0=50, seg1=0, cac_time=60s
Sat Mar 13 13:56:02 2021 daemon.err hostapd: DFS start_dfs_cac() failed, -1
Sat Mar 13 13:56:02 2021 daemon.err hostapd: Interface initialization failed
Sat Mar 13 13:56:02 2021 daemon.notice hostapd: wlan0: interface state DFS→DISABLED
Sat Mar 13 13:56:02 2021 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Mar 13 13:56:02 2021 user.notice SQM: Starting SQM script: piece_of_cake.qos on eth0.2, in: 52000 Kbps, out: 34000 Kbps
Sat Mar 13 13:56:03 2021 daemon.debug dnsmasq[3234]: listening on ifb4eth0.2(#24): fe80::60be:29ff:fe04:e719%ifb4eth0.2 port 53
Sat Mar 13 13:56:04 2021 daemon.debug dnsmasq[3234]: listening on tap_vpn(#21): fe80::5c10:4cff:fe75:60f9%tap_vpn port 53

13.03.20213681Base systemBug ReportVery LowLowramips: mt7601/mt7530 not works autodetection 100Mb spe...TrunkUnconfirmed Task Description

Device Xiaomi Mi Router 4A Gigabit Edition
OpenWrt 21.02-SNAPSHOT r15877-7e1ab3b746

mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode
mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control off

On a four-core ethernet 100Mb cable, it is forcibly connected to 1000Mb and link does not work.

12.03.20213680KernelBug ReportVery LowMediumEA3500 - Command BASTREAM error - Unstable Internet on ...AllUnconfirmed Task Description

I have observed the following issue for over two years with OpenWRT on my EA3500 router.

The issue is only observed to happen with my Samsung Note 8 phone - other devices on the network appear to operate normally. Additionally, the Note 8 works fine on other Wifi networks besides this one.

The phone will connect and operate as normal to the wifi. However, after some time (this could be hours or even minutes), the phone will say, Internet access may not be available and an exclamation point will appear. At this point, loading a website or any internet activity will fail. HOWEVER, on the phone, I can still type 192.168.1.1 and log into the router as normal. In other words, the connection with the outside internet fails, but the local connection seems unaffected. This issue seems to happen most when watching YouTube videos or streaming content like a radio station from the phone, though that could be just the period when most internet activity is occurring and thus when I observe the issue.

I have tried multiple things, including resetting the router, resetting the phone, trying different versions of OpenWRT, etc. This issue persists, however.

I have checked the system log and observed some interesting behaviors - which seem to occur at the point of internet failure on the device:

Fri Mar 12 11:44:48 2021 kern.err kernel: [25993.978963] ieee80211 phy0: Command BASTREAM error 0x1
Fri Mar 12 11:44:49 2021 kern.err kernel: [25994.996054] ieee80211 phy0: Command BASTREAM error 0x1
Fri Mar 12 11:44:50 2021 kern.err kernel: [25996.036069] ieee80211 phy0: Command BASTREAM error 0x1
Fri Mar 12 11:44:51 2021 kern.debug kernel: [25997.085130] ieee80211 phy0: Created a BA stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) : tid 1
Fri Mar 12 11:44:54 2021 kern.debug kernel: [25999.478457] ieee80211 phy0: Deleted BA stream index 0
Fri Mar 12 11:44:54 2021 kern.debug kernel: [25999.484846] ieee80211 phy0: Remove stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:44:54 2021 kern.debug kernel: [25999.500474] ieee80211 phy0: Added a new stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:44:54 2021 kern.debug kernel: [25999.507096] ieee80211 phy0: Started stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:44:54 2021 kern.err kernel: [25999.514897] ieee80211 phy0: Command BASTREAM error 0x1
Fri Mar 12 11:44:55 2021 kern.err kernel: [26000.596149] ieee80211 phy0: Command BASTREAM error 0x1
Fri Mar 12 11:44:56 2021 kern.err kernel: [26001.636171] ieee80211 phy0: Command BASTREAM error 0x1
Fri Mar 12 11:44:58 2021 kern.debug kernel: [26003.716183] ieee80211 phy0: Remove stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:05 2021 kern.debug kernel: [26010.484420] ieee80211 phy0: Added a new stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:05 2021 kern.debug kernel: [26010.491055] ieee80211 phy0: Started stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:05 2021 kern.debug kernel: [26010.502979] ieee80211 phy0: Created a BA stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) : tid 1
Fri Mar 12 11:45:07 2021 kern.debug kernel: [26012.710706] ieee80211 phy0: Deleted BA stream index 0
Fri Mar 12 11:45:07 2021 kern.debug kernel: [26012.716794] ieee80211 phy0: Remove stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:07 2021 kern.debug kernel: [26012.726323] ieee80211 phy0: Added a new stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:07 2021 kern.debug kernel: [26012.732920] ieee80211 phy0: Started stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:07 2021 kern.err kernel: [26012.741222] ieee80211 phy0: Command BASTREAM error 0x1
Fri Mar 12 11:45:08 2021 kern.err kernel: [26013.796387] ieee80211 phy0: Command BASTREAM error 0x1
Fri Mar 12 11:45:09 2021 kern.err kernel: [26014.836398] ieee80211 phy0: Command BASTREAM error 0x1
Fri Mar 12 11:45:11 2021 kern.debug kernel: [26016.916512] ieee80211 phy0: Remove stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:13 2021 kern.debug kernel: [26018.433394] ieee80211 phy0: Added a new stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:13 2021 kern.debug kernel: [26018.440027] ieee80211 phy0: Started stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:13 2021 kern.debug kernel: [26018.453757] ieee80211 phy0: Created a BA stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) : tid 1
Fri Mar 12 11:45:26 2021 kern.debug kernel: [26031.755594] ieee80211 phy0: Deleted BA stream index 0
Fri Mar 12 11:45:26 2021 kern.debug kernel: [26031.762604] ieee80211 phy0: Remove stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:26 2021 kern.debug kernel: [26031.779464] ieee80211 phy0: Added a new stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:26 2021 kern.debug kernel: [26031.786050] ieee80211 phy0: Started stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:26 2021 kern.err kernel: [26031.795750] ieee80211 phy0: Command BASTREAM error 0x1
Fri Mar 12 11:45:27 2021 kern.err kernel: [26032.836729] ieee80211 phy0: Command BASTREAM error 0x1
Fri Mar 12 11:45:28 2021 kern.err kernel: [26033.876747] ieee80211 phy0: Command BASTREAM error 0x1
Fri Mar 12 11:45:30 2021 kern.debug kernel: [26035.956754] ieee80211 phy0: Remove stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:30 2021 kern.debug kernel: [26035.984965] ieee80211 phy0: Added a new stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:30 2021 kern.debug kernel: [26035.991584] ieee80211 phy0: Started stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) 1
Fri Mar 12 11:45:30 2021 kern.debug kernel: [26036.182235] ieee80211 phy0: Created a BA stream for xx:xx:xx:xx:xx:xx (*** NOTE 8 MAC ***) : tid 1

These “BA stream” log entries seem to be exclusively happening for my Samsung Note 8 - the device that experiences the problem. Then, these “Command BASTREAM error 0×1” codes crop up. Soon after, the issue is observed on the device and internet activity ceases - though again, I can still use the web browser on the phone to connect to the router without issue.

Here are my current specs of the device:

Hostname OpenWrt
Model Linksys Audi (EA3500)
Architecture Feroceon 88FR131 rev 1 (v5l)
Firmware Version OpenWrt 19.07.7 r11306-c4a6851c72 / LuCI openwrt-19.07 branch git-21.044.30835-34e0d65
Kernel Version 4.14.221

This problem does not appear to be isolated to this particular device either. I observe that other users with this same device seem to have the same longstanding issue. See Bug #21284, for example.

I would like to find a resolution for this issue because at present the device is essentially unusable for my Note 8.

In the original post I linked above, another user observed, “I also have multiple WiFi devices that regularly use this access point. One’s a Nexus 4 and it works great, never gets these disconnects. The other two devices are Samsung Galaxy phones of different models and they both get the disconnects. Wondering if there’s some corner case behavior those wireless chips are exposing here that the maintainers of the kernel driver didn’t account for.”

I believe this is spot on, because I am getting this issue on a Note8... So it seems to be specific to Samsung.

12.03.20213679Base systemBug ReportVery LowLowFrequent errors "net_ratelimit: 1 callbacks suppressed"...TrunkUnconfirmed Task Description

Netgear R7800 running OpenWrt 21.02-SNAPSHOT, r15874-ceb6869cd9

...
[628349.322294] ath10k_pci 0000:01:00.0: fetch-ind: failed to lookup txq for peer_id 173 tid 0
[639882.834400] net_ratelimit: 2 callbacks suppressed
[639882.834446] ath10k_pci 0000:01:00.0: fetch-ind: failed to lookup txq for peer_id 179 tid 0
...

This goes on and on.

Enabling hostapd debugging reveals that devices get:

IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)

for no good reason, the devices are on and active.

Some devices seem to get disconnected when the above happens and they do not auto reconnect, I have to toggle wifi off/on on the device.

This all started recently, with the move to 21.02 and the recent updates of hostapd/mac80211.

10.03.20213678Base systemBug ReportVery LowCriticalSlow and inconsistent WiFi downloads/uploads on WAC104(...TrunkUnconfirmed Task Description

- Device problem occurs on : Netgear WAC104 / MT7621
- Software versions of OpenWrt: observed on snapshots r16134-c6652a7c9 / r16134-c6652a7c94
- Steps to reproduce : connect any device to wlan0/1 whatever the settings and download/upload data


I ran a few tests between a desktop wired to the device and a laptop connected to it through WiFi. Both are the only hosts of this device, being used a “dumb AP”, with the same hostname for both wlan. The results are always pretty bad and/or inconsistent.

For example, the following are the results of two of these tests, run one after the other:

$ iperf3 -c 192.168.1.12 -t 60 -P 1
Connecting to host 192.168.1.12, port 5201
[  5] local 192.168.1.10 port 48796 connected to 192.168.1.12 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  12.2 MBytes   102 Mbits/sec   14    201 KBytes       
[  5]   1.00-2.00   sec  3.75 MBytes  31.5 Mbits/sec   27   32.5 KBytes       
[  5]   2.00-3.00   sec  0.00 Bytes  0.00 bits/sec   13   14.1 KBytes       
[  5]   3.00-4.00   sec  2.50 MBytes  21.0 Mbits/sec   11   8.48 KBytes       
[  5]   4.00-5.00   sec  0.00 Bytes  0.00 bits/sec   13   4.24 KBytes       
[  5]   5.00-6.00   sec  5.00 MBytes  42.0 Mbits/sec    9   21.2 KBytes       
[  5]   6.00-7.00   sec  1.25 MBytes  10.5 Mbits/sec   11   1.41 KBytes       
[  5]   7.00-8.00   sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]   8.00-9.00   sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]   9.00-10.00  sec  0.00 Bytes  0.00 bits/sec    1   1.00 KBytes       
[  5]  10.00-11.00  sec  0.00 Bytes  0.00 bits/sec    8   3.00 KBytes       
[  5]  11.00-12.00  sec  3.75 MBytes  31.5 Mbits/sec    2   94.3 KBytes       
[  5]  12.00-13.00  sec  7.50 MBytes  62.9 Mbits/sec    0    159 KBytes       
[  5]  13.00-14.00  sec  1.25 MBytes  10.5 Mbits/sec   21   15.5 KBytes       
[  5]  14.00-15.00  sec  2.50 MBytes  21.0 Mbits/sec   10   1.41 KBytes       
[  5]  15.00-16.00  sec  0.00 Bytes  0.00 bits/sec    7   1.41 KBytes       
[  5]  16.00-17.00  sec  3.75 MBytes  31.5 Mbits/sec    4   84.4 KBytes       
[  5]  17.00-18.00  sec  1.25 MBytes  10.5 Mbits/sec   12   1.41 KBytes       
[  5]  18.00-19.00  sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]  19.00-20.00  sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]  20.00-21.00  sec  0.00 Bytes  0.00 bits/sec    1    720 Bytes       
[  5]  21.00-22.00  sec  0.00 Bytes  0.00 bits/sec    0    720 Bytes       
[  5]  22.00-23.00  sec  0.00 Bytes  0.00 bits/sec    0    720 Bytes       
[  5]  23.00-24.00  sec  0.00 Bytes  0.00 bits/sec    0    720 Bytes       
[  5]  24.00-25.00  sec  1.25 MBytes  10.5 Mbits/sec   33   53.5 KBytes       
[  5]  25.00-26.00  sec  6.25 MBytes  52.4 Mbits/sec    0    128 KBytes       
[  5]  26.00-27.00  sec  5.00 MBytes  41.9 Mbits/sec   14   33.8 KBytes       
[  5]  27.00-28.00  sec  0.00 Bytes  0.00 bits/sec   10   1.41 KBytes       
[  5]  28.00-29.00  sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]  29.00-30.00  sec  3.75 MBytes  31.5 Mbits/sec    8   95.8 KBytes       
[  5]  30.00-31.00  sec  6.25 MBytes  52.4 Mbits/sec    6   36.6 KBytes       
[  5]  31.00-32.00  sec  2.50 MBytes  21.0 Mbits/sec   28   7.05 KBytes       
[  5]  32.00-33.00  sec  2.50 MBytes  21.0 Mbits/sec   14   7.05 KBytes       
[  5]  33.00-34.00  sec  0.00 Bytes  0.00 bits/sec    2   1.41 KBytes       
[  5]  34.00-35.00  sec  1.25 MBytes  10.5 Mbits/sec    5   19.7 KBytes       
[  5]  35.00-36.00  sec  6.25 MBytes  52.4 Mbits/sec    0    120 KBytes       
[  5]  36.00-37.00  sec  2.50 MBytes  21.0 Mbits/sec   10   1.41 KBytes       
[  5]  37.00-38.00  sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]  38.00-39.00  sec  3.75 MBytes  31.5 Mbits/sec    6   90.2 KBytes       
[  5]  39.00-40.00  sec  6.25 MBytes  52.4 Mbits/sec    0    148 KBytes       
[  5]  40.00-41.00  sec  6.25 MBytes  52.4 Mbits/sec    0    190 KBytes       
[  5]  41.00-42.00  sec  6.25 MBytes  52.4 Mbits/sec    0    249 KBytes       
[  5]  42.00-43.00  sec  5.00 MBytes  41.9 Mbits/sec    2    156 KBytes       
[  5]  43.00-44.00  sec  7.50 MBytes  62.9 Mbits/sec    0    203 KBytes       
[  5]  44.00-45.00  sec  6.25 MBytes  52.4 Mbits/sec    2    152 KBytes       
[  5]  45.00-46.00  sec  7.50 MBytes  62.9 Mbits/sec    0    196 KBytes       
[  5]  46.00-47.00  sec  6.25 MBytes  52.4 Mbits/sec    0    228 KBytes       
[  5]  47.00-48.00  sec  5.00 MBytes  41.9 Mbits/sec   78    140 KBytes       
[  5]  48.00-49.00  sec  5.00 MBytes  41.9 Mbits/sec    0    173 KBytes       
[  5]  49.00-50.00  sec  0.00 Bytes  0.00 bits/sec    2   1.41 KBytes       
[  5]  50.00-51.00  sec  0.00 Bytes  0.00 bits/sec    1   1.41 KBytes       
[  5]  51.00-52.00  sec  0.00 Bytes  0.00 bits/sec    0   1.41 KBytes       
[  5]  52.00-53.00  sec  10.0 MBytes  84.0 Mbits/sec  172    163 KBytes       
[  5]  53.00-54.00  sec  22.5 MBytes   189 Mbits/sec    0    276 KBytes       
[  5]  54.00-55.00  sec  21.2 MBytes   178 Mbits/sec    2    246 KBytes       
[  5]  55.00-56.00  sec  22.5 MBytes   189 Mbits/sec    2    221 KBytes       
[  5]  56.00-57.00  sec  22.5 MBytes   189 Mbits/sec    0    313 KBytes       
[  5]  57.00-58.00  sec  22.5 MBytes   189 Mbits/sec    0    386 KBytes       
[  5]  58.00-59.00  sec  25.0 MBytes   210 Mbits/sec    2    239 KBytes       
[  5]  59.00-60.00  sec  21.2 MBytes   178 Mbits/sec    2    189 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-60.00  sec   315 MBytes  44.0 Mbits/sec  571             sender
[  5]   0.00-60.00  sec   308 MBytes  43.0 Mbits/sec                  receiver

iperf Done.
$ iperf3 -c 192.168.1.12 -t 60 -P 1
Connecting to host 192.168.1.12, port 5201
[  5] local 192.168.1.10 port 48912 connected to 192.168.1.12 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  44.8 MBytes   376 Mbits/sec   10    723 KBytes       
[  5]   1.00-2.00   sec  22.5 MBytes   189 Mbits/sec   65    110 KBytes       
[  5]   2.00-3.00   sec  20.0 MBytes   168 Mbits/sec    0    236 KBytes       
[  5]   3.00-4.00   sec  21.2 MBytes   178 Mbits/sec    1    243 KBytes       
[  5]   4.00-5.00   sec  21.2 MBytes   178 Mbits/sec    2    211 KBytes       
[  5]   5.00-6.00   sec  20.0 MBytes   168 Mbits/sec    0    291 KBytes       
[  5]   6.00-7.00   sec  21.2 MBytes   178 Mbits/sec    3    148 KBytes       
[  5]   7.00-8.00   sec  20.0 MBytes   168 Mbits/sec    1    194 KBytes       
[  5]   8.00-9.00   sec  22.5 MBytes   189 Mbits/sec    2    156 KBytes       
[  5]   9.00-10.00  sec  20.0 MBytes   168 Mbits/sec    2    197 KBytes       
[  5]  10.00-11.00  sec  20.0 MBytes   168 Mbits/sec    2    192 KBytes       
[  5]  11.00-12.00  sec  21.2 MBytes   178 Mbits/sec    1    173 KBytes       
[  5]  12.00-13.00  sec  21.2 MBytes   178 Mbits/sec    2    173 KBytes       
[  5]  13.00-14.00  sec  23.8 MBytes   199 Mbits/sec    0    288 KBytes       
[  5]  14.00-15.00  sec  26.2 MBytes   220 Mbits/sec    2    188 KBytes       
[  5]  15.00-16.00  sec  21.2 MBytes   178 Mbits/sec    0    286 KBytes       
[  5]  16.00-17.00  sec  22.5 MBytes   189 Mbits/sec    1    257 KBytes       
[  5]  17.00-18.00  sec  20.0 MBytes   168 Mbits/sec    3    195 KBytes       
[  5]  18.00-19.00  sec  26.2 MBytes   220 Mbits/sec    0    308 KBytes       
[  5]  19.00-20.00  sec  26.2 MBytes   220 Mbits/sec    0    395 KBytes       
[  5]  20.00-21.00  sec  23.8 MBytes   199 Mbits/sec    5    163 KBytes       
[  5]  21.00-22.00  sec  22.5 MBytes   189 Mbits/sec    2    116 KBytes       
[  5]  22.00-23.00  sec  22.5 MBytes   189 Mbits/sec    0    252 KBytes       
[  5]  23.00-24.00  sec  22.5 MBytes   189 Mbits/sec   26    256 KBytes       
[  5]  24.00-25.00  sec  23.8 MBytes   199 Mbits/sec    3    230 KBytes       
[  5]  25.00-26.00  sec  22.5 MBytes   189 Mbits/sec    1    197 KBytes       
[  5]  26.00-27.00  sec  23.8 MBytes   199 Mbits/sec    2    235 KBytes       
[  5]  27.00-28.00  sec  22.5 MBytes   189 Mbits/sec    4    127 KBytes       
[  5]  28.00-29.00  sec  22.5 MBytes   189 Mbits/sec    0    259 KBytes       
[  5]  29.00-30.00  sec  25.0 MBytes   210 Mbits/sec    1    252 KBytes       
[  5]  30.00-31.00  sec  22.5 MBytes   189 Mbits/sec    2    245 KBytes       
[  5]  31.00-32.00  sec  23.8 MBytes   199 Mbits/sec    3    225 KBytes       
[  5]  32.00-33.00  sec  23.8 MBytes   199 Mbits/sec    0    321 KBytes       
[  5]  33.00-34.00  sec  22.5 MBytes   189 Mbits/sec    2    257 KBytes       
[  5]  34.00-35.00  sec  23.8 MBytes   199 Mbits/sec    2    191 KBytes       
[  5]  35.00-36.00  sec  20.0 MBytes   168 Mbits/sec    3    112 KBytes       
[  5]  36.00-37.00  sec  22.5 MBytes   189 Mbits/sec    2    124 KBytes       
[  5]  37.00-38.00  sec  22.5 MBytes   189 Mbits/sec    0    259 KBytes       
[  5]  38.00-39.00  sec  23.8 MBytes   199 Mbits/sec    4    219 KBytes       
[  5]  39.00-40.00  sec  20.0 MBytes   168 Mbits/sec    1    232 KBytes       
[  5]  40.00-41.00  sec  21.2 MBytes   178 Mbits/sec    4    163 KBytes       
[  5]  41.00-42.00  sec  21.2 MBytes   178 Mbits/sec    4   94.7 KBytes       
[  5]  42.00-43.00  sec  21.2 MBytes   178 Mbits/sec    0    232 KBytes       
[  5]  43.00-44.00  sec  22.5 MBytes   189 Mbits/sec    1    246 KBytes       
[  5]  44.00-45.00  sec  22.5 MBytes   189 Mbits/sec    2    198 KBytes       
[  5]  45.00-46.00  sec  21.2 MBytes   178 Mbits/sec    2    185 KBytes       
[  5]  46.00-47.00  sec  22.5 MBytes   189 Mbits/sec    0    290 KBytes       
[  5]  47.00-48.00  sec  18.8 MBytes   157 Mbits/sec    5    187 KBytes       
[  5]  48.00-49.00  sec  20.0 MBytes   168 Mbits/sec    2    184 KBytes       
[  5]  49.00-50.00  sec  20.0 MBytes   168 Mbits/sec    2    204 KBytes       
[  5]  50.00-51.00  sec  21.2 MBytes   178 Mbits/sec    0    301 KBytes       
[  5]  51.00-52.00  sec  21.2 MBytes   178 Mbits/sec    3    180 KBytes       
[  5]  52.00-53.00  sec  18.8 MBytes   157 Mbits/sec    8    144 KBytes       
[  5]  53.00-54.00  sec  20.0 MBytes   168 Mbits/sec    1    141 KBytes       
[  5]  54.00-55.00  sec  21.2 MBytes   178 Mbits/sec    2    168 KBytes       
[  5]  55.00-56.00  sec  20.0 MBytes   168 Mbits/sec    2    153 KBytes       
[  5]  56.00-57.00  sec  21.2 MBytes   178 Mbits/sec    0    259 KBytes       
[  5]  57.00-58.00  sec  18.8 MBytes   157 Mbits/sec   11    222 KBytes       
[  5]  58.00-59.00  sec  18.8 MBytes   157 Mbits/sec    1    228 KBytes       
[  5]  59.00-60.00  sec  22.5 MBytes   189 Mbits/sec    5    174 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-60.00  sec  1.30 GBytes   186 Mbits/sec  215             sender
[  5]   0.00-60.00  sec  1.28 GBytes   183 Mbits/sec                  receiver

iperf Done.

Linux kernel buffer output:

root@wac104:~# dmesg
[    0.000000] Linux version 5.4.102 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16134-c6652a7c94)) #0 SMP Sat Mar 6 19:23:48 2021
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Netgear WAC104
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2} total 2
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000]   Normal zone: 288 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] percpu: Embedded 14 pages/cpu s26768 r8192 d22384 u57344
[    0.000000] pcpu-alloc: s26768 r8192 d22384 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Writing ErrCtl register=00020821
[    0.000000] Readback ErrCtl register=00020821
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 120568K/131072K available (6069K kernel code, 205K rwdata, 1292K rodata, 1252K init, 238K bss, 10504K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 256
[    0.000000] random: get_random_bytes called from start_kernel+0x340/0x558 with crng_init=0
[    0.000000] CPU Clock: 880MHz
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000008] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.015485] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
[    0.055787] pid_max: default: 32768 minimum: 301
[    0.065110] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.079507] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.097237] rcu: Hierarchical SRCU implementation.
[    0.107168] smp: Bringing up secondary CPUs ...
[    8.468259] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    8.468268] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    8.468280] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    8.468379] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.144226] Synchronize counters for CPU 1: done.
[    0.203863] smp: Brought up 1 node, 2 CPUs
[    0.216000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.235283] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.248893] pinctrl core: initialized pinctrl subsystem
[    0.260578] NET: Registered protocol family 16
[    0.282226] FPU Affinity set after 4688 emulations
[    0.302292] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    0.323331] clocksource: Switched to clocksource GIC
[    0.334983] NET: Registered protocol family 2
[    0.344920] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.361626] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.376749] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.390741] TCP: Hash tables configured (established 1024 bind 1024)
[    0.403493] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.416382] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.430471] NET: Registered protocol family 1
[    0.439033] PCI: CLS 0 bytes, default 32
[    0.539237] 4 CPUs re-calibrate udelay(lpj = 1163264)
[    0.550861] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[    0.576661] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.588203] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.609861] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.626695] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.638093] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.649403] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.661273] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.677969] printk: console [ttyS0] disabled
[    0.686413] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 15, base_baud = 3125000) is a 16550A
[    0.704353] printk: console [ttyS0] enabled
[    0.720899] printk: bootconsole [early0] disabled
[    0.742962] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388
[    0.757928] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[    0.770591] nand: Macronix MX30LF1G18AC
[    0.778236] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.793324] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
[    0.806362] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[    0.820930] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[    0.835495] Scanning device for bad blocks
[    0.929285] Bad eraseblock 67 at 0x000000860000
[    0.979556] Bad eraseblock 100 at 0x000000c80000
[    1.090848] Bad eraseblock 181 at 0x0000016a0000
[    1.152689] Bad eraseblock 223 at 0x000001be0000
[    2.033868] Bad eraseblock 911 at 0x0000071e0000
[    2.185200] 6 fixed-partitions partitions found on MTD device mt7621-nand
[    2.198719] Creating 6 MTD partitions on "mt7621-nand":
[    2.209139] 0x000000000000-0x000000100000 : "u-boot"
[    2.220628] 0x000000100000-0x000000200000 : "SC PID"
[    2.232144] 0x000000200000-0x000000600000 : "kernel"
[    2.243590] 0x000000600000-0x000002200000 : "ubi"
[    2.254608] 0x000002e00000-0x000002f00000 : "factory"
[    2.266193] 0x000004200000-0x000007e00000 : "reserved"
[    2.279491] libphy: Fixed MDIO Bus: probed
[    2.313633] libphy: mdio: probed
[    2.320337] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.336647] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 16
[    2.355482] mt7621-pci 1e140000.pcie: Parsing DT failed
[    2.369012] NET: Registered protocol family 10
[    2.379392] Segment Routing with IPv6
[    2.386832] NET: Registered protocol family 17
[    2.395766] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.421838] 8021q: 802.1Q VLAN Support v1.8
[    2.432285] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.454738] libphy: dsa slave smi: probed
[    2.463178] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
[    2.481234] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
[    2.499279] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
[    2.517288] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
[    2.535604] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
[    2.553221] DSA: tree 0 setup
[    2.559529] rt2880-pinmux pinctrl: pcie is already enabled
[    2.570481] mt7621-pci 1e140000.pcie: Error applying setting, reverse things back
[    2.585545] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
[    2.600470] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
[    2.715025] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
[    2.726143] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
[    2.836992] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK)
[    2.850865] mt7621-pci 1e140000.pcie: PCIE0 enabled
[    2.860586] mt7621-pci 1e140000.pcie: PCIE2 enabled
[    2.870309] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    2.889040] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[    2.901725] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
[    2.915431] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    2.929132] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.940112] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    2.952113] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.964607] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    2.977165] pci 0000:00:00.0: supports D1
[    2.985155] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.997017] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    3.009033] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    3.021528] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    3.034079] pci 0000:00:01.0: supports D1
[    3.042076] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    3.054863] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.070834] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.087008] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[    3.099041] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    3.112611] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    3.126065] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    3.139612] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    3.150034] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    3.162179] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    3.175711] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    3.190107] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    3.203513] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
[    3.215542] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    3.228169] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    3.241660] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[    3.252095] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
[    3.264239] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff]
[    3.277767] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    3.292166] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    3.305403] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    3.318584] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    3.332463] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    3.345649] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    3.359528] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    3.373059] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[    3.387456] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[    3.400987] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[    3.415384] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
[    3.428920] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
[    3.442452] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
[    3.455991] pci 0000:00:01.0: BAR 7: assigned [io  0x1e161000-0x1e161fff]
[    3.469532] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[    3.484114] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[    3.498506] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.508406] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
[    3.521934] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    3.535466] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    3.549866] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
[    3.563405] pci 0000:00:01.0: PCI bridge to [bus 02]
[    3.573298] pci 0000:00:01.0:   bridge window [io  0x1e161000-0x1e161fff]
[    3.586825] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    3.600356] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[    3.615348] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
[    3.630162] UBI: auto-attach mtd3
[    3.636847] ubi0: attaching mtd3
[    3.923256] ubi0: scanning is finished
[    3.947133] ubi0: attached mtd3 (name "ubi", size 28 MiB)
[    3.957945] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    3.971649] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    3.985172] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    3.999042] ubi0: good PEBs: 220, bad PEBs: 4, corrupted PEBs: 0
[    4.011009] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    4.025402] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1609112511
[    4.043604] ubi0: available PEBs: 0, total reserved PEBs: 220, PEBs reserved for bad PEB handling: 16
[    4.061998] ubi0: background thread "ubi_bgt0d" started, PID 454
[    4.069210] block ubiblock0_0: created from ubi0:0(rootfs)
[    4.084951] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    4.098837] hctosys: unable to open rtc device (rtc0)
[    4.116176] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
[    4.134557] Freeing unused kernel memory: 1252K
[    4.143636] This architecture does not have kernel memory protection.
[    4.156463] Run /sbin/init as init process
[    4.199120] random: fast init done
[    4.629448] init: Console is alive
[    4.636476] init: - watchdog -
[    5.412397] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.513635] usbcore: registered new interface driver usbfs
[    5.524733] usbcore: registered new interface driver hub
[    5.535460] usbcore: registered new device driver usb
[    5.560661] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.579634] init: - preinit -
[    6.335071] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[    6.351194] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    6.368572] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.554386] random: jshn: uninitialized urandom read (4 bytes read)
[    6.672703] random: jshn: uninitialized urandom read (4 bytes read)
[    6.707476] random: jshn: uninitialized urandom read (4 bytes read)
[    6.911188] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[    6.924828] 8021q: adding VLAN 0 to HW filter on device lan1
[   11.164263] UBIFS (ubi0:1): Mounting in unauthenticated mode
[   11.175788] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 578
[   11.259271] UBIFS (ubi0:1): recovery needed
[   11.453234] UBIFS (ubi0:1): recovery completed
[   11.462234] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   11.477831] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   11.497576] UBIFS (ubi0:1): FS size: 21078016 bytes (20 MiB, 166 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
[   11.518183] UBIFS (ubi0:1): reserved for root: 995566 bytes (972 KiB)
[   11.531019] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID C6A4037D-B0B0-4663-BD6C-9AFF40588098, small LPT model
[   11.569131] mount_root: switching to ubifs overlay
[   11.595957] urandom-seed: Seeding with /etc/urandom.seed
[   11.765833] procd: - early -
[   11.771721] procd: - watchdog -
[   12.379375] procd: - watchdog -
[   12.388342] procd: - ubus -
[   12.459882] procd: - init -
[   13.169190] kmodloader: loading kernel modules from /etc/modules.d/*
[   13.232256] Loading modules backported from Linux version v5.10.16-0-gde53befa79cf
[   13.247377] Backport generated by backports.git v5.10.16-1-0-g21d2a1d2
[   13.318238] xt_time: kernel timezone is -0000
[   13.377596] urngd: v1.0.2 started.
[   13.484346] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=20
[   13.495178] pci 0000:00:01.0: enabling device (0004 -> 0007)
[   13.506506] mt7603e 0000:02:00.0: enabling device (0000 -> 0002)
[   13.518705] mt7603e 0000:02:00.0: ASIC revision: 76030010
[   13.576328] random: crng init done
[   13.583135] random: 7 urandom warning(s) missed due to ratelimiting
[   14.148696] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
[   14.159867] mt7603e 0000:02:00.0: Build Time: 20160107100755
[   14.195266] mt7603e 0000:02:00.0: firmware init done
[   14.382380] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.465260] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=18
[   14.476152] pci 0000:00:00.0: enabling device (0004 -> 0007)
[   14.487463] mt76x2e 0000:01:00.0: enabling device (0000 -> 0002)
[   14.499716] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[   15.100161] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
[   15.118144] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[   15.129140] mt76x2e 0000:01:00.0: Build: 1
[   15.137412] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[   15.163402] mt76x2e 0000:01:00.0: Firmware running!
[   15.175128] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   15.211983] PPP generic driver version 2.4.2
[   15.222213] NET: Registered protocol family 24
[   15.258953] kmodloader: done loading kernel modules from /etc/modules.d/*
[   22.713658] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[   22.741566] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[   22.759129] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   22.766735] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[   22.789706] 8021q: adding VLAN 0 to HW filter on device lan1
[   22.804591] br-lan: port 1(lan1) entered blocking state
[   22.815149] br-lan: port 1(lan1) entered disabled state
[   22.835482] device lan1 entered promiscuous mode
[   22.844838] device eth0 entered promiscuous mode
[   22.859793] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.885938] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[   22.900198] 8021q: adding VLAN 0 to HW filter on device lan2
[   22.922694] br-lan: port 2(lan2) entered blocking state
[   22.933241] br-lan: port 2(lan2) entered disabled state
[   22.946267] device lan2 entered promiscuous mode
[   22.966512] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[   22.999138] 8021q: adding VLAN 0 to HW filter on device lan3
[   23.017738] br-lan: port 3(lan3) entered blocking state
[   23.028367] br-lan: port 3(lan3) entered disabled state
[   23.083123] device lan3 entered promiscuous mode
[   23.104261] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[   23.120338] 8021q: adding VLAN 0 to HW filter on device lan4
[   23.135141] br-lan: port 4(lan4) entered blocking state
[   23.145722] br-lan: port 4(lan4) entered disabled state
[   23.157970] device lan4 entered promiscuous mode
[   25.016009] br-lan: port 5(wlan0) entered blocking state
[   25.026756] br-lan: port 5(wlan0) entered disabled state
[   25.037963] device wlan0 entered promiscuous mode
[   25.715599] br-lan: port 6(wlan1) entered blocking state
[   25.726273] br-lan: port 6(wlan1) entered disabled state
[   25.737570] device wlan1 entered promiscuous mode
[   25.747433] br-lan: port 6(wlan1) entered blocking state
[   25.758073] br-lan: port 6(wlan1) entered listening state
[   26.011551] br-lan: port 6(wlan1) entered disabled state
[   27.099911] mt7530 mdio-bus:1f lan3: Link is Up - 1Gbps/Full - flow control rx/tx
[   27.115201] br-lan: port 3(lan3) entered blocking state
[   27.125766] br-lan: port 3(lan3) entered listening state
[   29.275253] br-lan: port 3(lan3) entered learning state
[   31.153066] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   31.166104] br-lan: port 6(wlan1) entered blocking state
[   31.176790] br-lan: port 6(wlan1) entered listening state
[   31.291260] br-lan: port 3(lan3) entered forwarding state
[   31.302029] br-lan: topology change detected, propagating
[   31.313602] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   31.669584] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   31.682780] br-lan: port 5(wlan0) entered blocking state
[   31.693472] br-lan: port 5(wlan0) entered listening state
[   33.371270] br-lan: port 6(wlan1) entered learning state
[   33.883254] br-lan: port 5(wlan0) entered learning state
[   35.387259] br-lan: port 6(wlan1) entered forwarding state
[   35.398200] br-lan: topology change detected, propagating
[   35.899252] br-lan: port 5(wlan0) entered forwarding state
[   35.910185] br-lan: topology change detected, propagating
[   97.659766] mt7530 mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[   97.674752] br-lan: port 2(lan2) entered blocking state
[   97.685231] br-lan: port 2(lan2) entered listening state
[   99.931274] br-lan: port 2(lan2) entered learning state
[  101.947282] br-lan: port 2(lan2) entered forwarding state
root@wac104:~# uname -a
Linux wac104 5.4.102 #0 SMP Sat Mar 6 19:23:48 2021 mips GNU/Linux
root@wac104:~# cat /proc/cpuinfo 
system type		: MediaTek MT7621 ver:1 eco:3
machine			: Netgear WAC104
processor		: 0
cpu model		: MIPS 1004Kc V2.15
BogoMIPS		: 581.63
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 32
extra interrupt vector	: yes
hardware watchpoint	: yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa			: mips1 mips2 mips32r1 mips32r2
ASEs implemented	: mips16 dsp mt
Options implemented	: tlb 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit cdmm perf
shadow register sets	: 1
kscratch registers	: 0
package			: 0
core			: 0
VPE			: 0
VCED exceptions		: not available
VCEI exceptions		: not available

processor		: 1
cpu model		: MIPS 1004Kc V2.15
BogoMIPS		: 581.63
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 32
extra interrupt vector	: yes
hardware watchpoint	: yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa			: mips1 mips2 mips32r1 mips32r2
ASEs implemented	: mips16 dsp mt
Options implemented	: tlb 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit cdmm perf
shadow register sets	: 1
kscratch registers	: 0
package			: 0
core			: 0
VPE			: 1
VCED exceptions		: not available
VCEI exceptions		: not available

I just hope I did not forget any relevant details. The testing I made was more thorough but I did not really what would be more relevant to you. Please let me know if you need more details or if my bug report approach is not relevant enough to see the problem.

10.03.20213677Base systemBug ReportVery LowLowLCP terminated by peer after IPv6 interface config fail...TrunkUnconfirmed Task Description

I have built a custom kernel firmware image for a low memory device (TP-Link TL-WR842N/ND v2) from the current snapshot. As part of my efforts to free memory space I removed IPv6 support from the kernel.

When I connect to the mobile network I receive an IP address and, immediately after, a “LCP terminated by peer” message.

Tue Mar 9 05:17:51 2021 daemon.notice pppd[6962]: Connect: 3g-wan ←→ /dev/ttyACM0
Tue Mar 9 05:17:55 2021 daemon.err pppd[6962]: IPv6 socket creation failed: Address family not supported by protocol
Tue Mar 9 05:17:55 2021 daemon.err pppd[6962]: IPv6 socket creation failed: Address family not supported by protocol
Tue Mar 9 05:17:55 2021 daemon.notice pppd[6962]: local IP address x.x.x.146
Tue Mar 9 05:17:55 2021 daemon.notice pppd[6962]: remote IP address x.x.x.146
Tue Mar 9 05:17:55 2021 daemon.notice pppd[6962]: primary DNS address 8.8.8.8
Tue Mar 9 05:17:55 2021 daemon.notice pppd[6962]: secondary DNS address 8.8.4.4
Tue Mar 9 05:17:55 2021 daemon.info pppd[6962]: LCP terminated by peer
Tue Mar 9 05:17:55 2021 daemon.info pppd[6962]: Connect time 0.0 minutes.

I enabled debug messages for ppp and saw what I believe is the cause of the issue, because of the failed configuration of the IPv6 interfaces we send a interface configuration failure message to the peer:

Tue Mar 9 05:14:09 2021 daemon.debug pppd[6524]: sent [IPV6CP TermReq id=0×2 “Interface configuration failed”]

Shortly thereafter, and quite logically, we receive a termination request from the peer.

Tue Mar 9 05:14:09 2021 daemon.debug pppd[6524]: rcvd [LCP TermReq id=0×3]

I have a few questions about this issue:

- Is there a way for me to work around this issue in config and allow the router to connect using only IPv4
- Is there a way to change this behaviour by default, so that if you don’t have IPv6 support in your build of OpenWrt PPP doesn’t attempt to use IPv6
- Is there a way to improve the quality of the log messages, if we’re sending a termination message to the peer this should probably be reported even when not in debug mode. This is probably more of an upstream issue in pppd itself.

09.03.20213675Base systemBug ReportVery LowMediumgetaddrinfo prefers IPv6 and fails when there is no IPv...openwrt-19.07Unconfirmed Task Description

As stated in the summary, getaddrinfo prefers IPv6 and fails when there is no IPv6 connectivity which causes issues with some functionalities.
For instance, I opened this thread on the forum about collectd network plugin complaining of “getaddrinfo failed: System error” when using a hostname that is resolvable only in IPv4 or an IPv4 address.
IPv6 is deactivated on my entire network (on the router and on the hosts) and this seems to cause that error message.
This is happening on a Linksys WRT1900ACS with OpenWrt 19.07.2 and on a TP-Link Archer C7 v5 with OpenWrt 19.07.7
Apparently, the issue is still relevant even when you do not disable IPv6 specifically. vgaetera (on the forum) tested OpenWrt 19.07.7 x86_64 as a KVM/QEMU guest with mostly default configuration. So, IPv6 is enabled but IPv6 connectivity is missing and the issue persists.

I am not sure if it is also related to getaddrinfo but another issue is when I flash a device with OpenWRT and there is no IPv6 connectivity, I can’t use opkg at all. First I have to manually download full wget and install it and then opkg starts working.

For more details and troubleshooting about this getaddrinfo issue, check : https://forum.openwrt.org/t/collectd-network-plugin-getaddrinfo-failed-system-error/90546

06.03.20213673Base systemBug ReportVery LowMediumCannot flash a recent image on Mikrotik hap liteopenwrt-19.07Unconfirmed Task Description

Using a Mikrotik hap lite
system type : Qualcomm Atheros QCA9533 ver 2 rev 0
machine : MikroTik RouterBOARD RB941-2nD

Using latest releases 19.07.7 for both firmware install image and sysupgrade.

Following the guide, after booting in ram, the command sysupgrade is killed because the memory is getting low. Either using Luci or sysupgrade in ssh.

Here the state of tmpfs :

# df -h
Filesystem                Size      Used Available Use% Mounted on
tmpfs                    13.1M    248.0K     12.9M   2% /tmp
tmpfs                   512.0K         0    512.0K   0% /dev

The state of the rootfs

# du -sh /*
464.0K	/bin
0	/dev
604.0K	/etc
4.0K	/init
3.1M	/lib
0	/mnt
0	/overlay
0	/proc
4.0K	/rom
0	/root
536.0K	/sbin
0	/sys
248.0K	/tmp
4.1M	/usr
0	/var
932.0K	/www

Total = 10M

And the sysupgrade image is 4.1M.

It’s possible to go through the problem after removing some binaries and libraries (wireless is not necessary).

To reproduce, follow the guide. It will fail at step Flash openwrt to mikrotik

05.03.20213666PackagesBug ReportVery LowHighVery low speed WiFi with kmod-rt2800-* packgesAllUnconfirmed Task Description

1. Youku-L1C
2. kmod-rt2800-*
3. Very low speed WiFi with kmod-rt2800-* packages: download 15-20 Mbit/sec, upload 50-80 Mbit/sec. This problem since in 2017 year after add MT76xx chipset support. With 2017 year this problem not resolved. Problem in TX module in this package: very low download speed.

Developers, please resolve and fix this problem.


05.03.20213665PackagesBug ReportVery LowHighBroken work kmod-sdhci-mt7620 packageopenwrt-19.07Unconfirmed Task Description

1. Youku-L1C
2. kmod-sdhci-mt7620
3. Broken work kmod-sdhci-mt7620 package: periodic SD card left to read-only mode. This not fix without reboot device.

 


04.03.20213663Base systemBug ReportVery LowLowReset button performs factory reset on touch on MR200v1openwrt-19.07Unconfirmed Task Description

Using TP-link MR200v1 with OpenWrt 19.07.6, r11278-8055e38794 without any modifications, just a slight touch on a reset button performs a factory reset. It is caused by this line https://github.com/openwrt/openwrt/blob/1d412235a57f3359d1c7bb63bfebce50c56caee6/package/base-files/files/etc/rc.button/reset#L26

Commenting it out and calling `reload_config` resolves the issue. However, if I lose LUCI and SSH access, I can not factory reset the router.

If I understand the script correctly, factory reset should only be performed if the button is pressed for longer than 5 seconds.

For me, it is hard to debug - I can not simply run the script to print what it sees, specifically ACTION and SEEN variables, because it is coupled to the button presses.

Where is the proper place to get help, please?

04.03.20213662Base systemBug ReportVery LowHighParameters aren't passed to kernel modules at bootTrunkUnconfirmed Task Description

I have a D-Link DIR-882 A1 router (MT7621 + 2x MT7615N, 128 MB of RAM, 16 MB of NOR flash) running OpenWrt SNAPSHOT r16087-1d412235a5 (built on March 4, 2021) and I need to pass quirks=0bc2:231a:u parameter to the usb-storage module at boot in order to skip loading of the UAS driver, which is currently broken on the xhci-mtk driver this router uses (as reported here, here, here and on various topics on the OpenWrt Forums), and prevents an external USB 3.0 HDD I have to work with it.

Accordingly to several sources, this should be easily accomplished by writing usb-storage quirks=<vid>:<pid>:u on a single line into /etc/modules.d/usb-storage, however, the specified parameter is ignored and never reaches the kernel module, as running cat /sys/module/usb_storage/parameters/quirks after boot is complete returns empty. I also found this thread, dating back to 2018, with other users having the same issue, and which also seems to confirm that adding the kernel module parameters to the corresponding file under /etc/modules.d is how it’s supposed to work, but it simply doesn’t.

The only workaround I found so far is running echo “0bc2:231a:u” > /sys/module/usb_storage/parameters/quirks after booting, but then I need to physically unplug and re-plug the HDD for the changes to take effect, this also needs to be done every time the router powers on, which is very annoying. Other things I tried includes creating /etc/modprobe.d/usb-storage.conf with options usb-storage quirks=<vid>:<pid>:u and also unloading (and ever completely removing) kmod-usb-storage-uas from the device, but none of that worked.

So, is there any other mechanism for passing parameters to kernel modules at boot time? As far as I searched, /etc/modules.d seems to be the only one, but it’s broken...

03.03.20213658Base systemBug ReportVery LowMediumUpgrade from 19.07.6 to 19.07.7 is only working partial...openwrt-19.07Unconfirmed Task Description

This occurred to me when trying to upgrade one of my “TP-Link TL-WR842N/ND v2” from 19.07.6 to 19.07.7.
I used following file to flash through /cgi-bin/luci/admin/system/flash:
https://downloads.openwrt.org/releases/19.07.7/targets/ath79/generic/openwrt-19.07.7-ath79-generic-tplink_tl-wr842n-v2-squashfs-sysupgrade.bin After the upload, I also checked the checksum:
5e1d205a787e7a698fa228346379d36b3eef9d35507b45137cee544e0e983816

This file seems to contain some kind of partial upgrade. The device is coming up and accessible, but it reports itself as 19.07.6 while using kernel 4.14.221.
Installation of all kernel related modules fail because the opkg/distfeeds.conf references to 19.07.6

03.03.20213657Base systemBug ReportVery LowLowdnsmasq listen on the wrong address after the PPP updat...TrunkUnconfirmed Task Description

With PPP version 2.4.9 dnsmasq would try to listen on remote LL address instead of local LL address which spams the log with
daemon.warn dnsmasq[4528]: failed to create listening socket for xxx::xx:xx:xxx:xxx%pppoe-wan: Address not available

That doesn’t happen anymore after I revert the commit 030bc39c350d301d3cbca4725e845a752c359c5f

 


01.03.20213656Base systemBug ReportVery LowCriticalDGND3700 v2 - Boot loopopenwrt-19.07Unconfirmed Task Description

Boot

01.03.20213654PackagesBug ReportVery LowLowpackage/boot/arm-trusted-firmware-mvebu requires fetchi...TrunkUnconfirmed Task Description

Supply the following if possible:

- Device problem occurs on

Any AArch64 host machine.

- Software versions of OpenWrt/LEDE release, packages, etc.

git HEAD (commit acbea54bc29a22d8fb171bc9da0f1b16fb0ec233)

- Steps to reproduce

 

1. run ‘make menuconfig’ 2. select ‘Marvell EBU Armada’ → 3700P → ‘Marvell Espressobin non-eMMC’ 3. run ‘make’

At some moment it will fail on attempt to fetch Linaro’s build of cross compiler. Which is available only for x86-64 host architecture.

OpenWRT should build own cross compiler instead of relying on external one.


01.03.20213653KernelBug ReportVery LowMediumwireguard is not working - not sending any packetsTrunkUnconfirmed Task Description

I’m using 19.07.7 r11306-c4a6851c72 build on xiaomi mi router 4a gigabit, built by David Betham (it doesn’t affect wireguard, I think).

The problem I’m having is that wireguard is completely not working: although the tunnel is configured, it never sends any traffic to the destination peer.

My wg config:

# wg show
interface: wg0
  public key: Kus59Dar/4ki3/IWM7UVn5uFFco79btQgH9CKCDERF8=
  private key: (hidden)
  listening port: 31833

peer: qEgo8fA/w9pXtBoQnB5/U/jNn30AFxloPV/owjxKj0A=
  endpoint: 185.X.Y.Z:1195
  allowed ips: 10.10.10.0/24
  persistent keepalive: every 15 seconds

Now, I start

tcpdump -i any -f "udp and port 1195"

and ping the remote end tunnel, but not a single ping is returned nor I see a single packet captured by tcpdump. The same config and device were working on some unofficial 17.07.4 build I was using previously.

Kernel used:

# uname -a
Linux coffee 4.14.221 #0 SMP Mon Feb 15 15:22:37 2021 mips GNU/Linux

My software versions are:

kmod-udptunnel4 - 4.14.221-1
kmod-udptunnel6 - 4.14.221-1
kmod-wireguard - 4.14.221+1.0.20200611-2
luci-app-wireguard - git-21.054.03371-3b137b5-1
luci-proto-wireguard - git-21.054.03371-3b137b5-1
wireguard - 1.0.20200611-2
wireguard-tools - 1.0.20191226-1

Please let me know how can I help investigate it further.

28.02.20213652Base systemBug ReportVery LowMediumDir 859 stranger 2.4GHz Wi-Fiopenwrt-19.07Unconfirmed Task Description

I have a dir-859 running Openwrt 19.07.7, this run stable this version and the older’s, but the 2.4GHz Wi-Fi speed in most conditions is capped around 30Mb/s download speed, upload is good, i’ve tryed changing all wireless options in luci, like tx power or channel Bandwidth, but the result is same, i atually using channel 1@20MHz, i have another router TP-LINK TL-WR740N running DD-WRT and it can provide more than 45Mb/s over 2.4GHz@20MHz, and the DD-WRT running on same dir-859 can provide same speed’s than 740n on 2.4GHz, the dir-859 can reach 40Mb/s if i run speedtest on nearest servers, but a toronto server or any server with more latency is capped to around 30Mb/s, and i only have 2.4Ghz devices :/

The dir-859 speedtest on fdcservers.net toronto: https://www.speedtest.net/my-result/a/7089190072.png

The TL-WR740N on same server: https://www.speedtest.net/my-result/a/7089192985.png

tell me the config files or log’s that i have to send.

27.02.20213649KernelBug ReportVery LowMediumSoftware flow offloading breaks IPv6 policy-based routi...TrunkUnconfirmed Task Description

I use ip6tables MARK and iproute2 rule to forward certain traffic to a WireGuard VPN interface.
When software flow offloading is on, IPv6 traffic over VPN no longer works, but IPv4 works fine.
A tcpdump check shows that offloaded IPv6 packets are routed by the main routing table instead of the one specified in ip -6 rule.

Both 5.4 and 5.10 kernel version have this issue.

27.02.20213648Base systemBug ReportVery LowLowBackups contain etc/uhttpd.key twiceopenwrt-19.07Unconfirmed Task Description

Device problem occurs on

- TP-Link Archer C7 v4

Software versions of OpenWrt/LEDE release, packages, etc.

- OpenWrt 19.07.6 r11278-8055e38794 / LuCI openwrt-19.07 branch git-21.050.37945-c33df8f

Steps to reproduce

 

- Log in via SSH - sysupgrade -l
- The listing shows /etc/uhttpd.key twice. A backup created using -b also contains the file twice.

Expected behaviour

The file should only be included once.


27.02.20213646KernelBug ReportVery LowMediumUnable to Swap /proc/swaps does not exist (ramips rt305...openwrt-19.07Unconfirmed Task Description

1)
Device Dlink DIR320 rev.B1
OpenWrt 19.07.7 r11306-c4a6851c72 / LuCI openwrt-19.07 branch git-21.044.30835-34e0d65

2)
Istalled packages:

block-mount
kmod-usb-core
kmod-usb2
kmod-usb-ohci
kmod-usb-storage
kmod-fs-ext4
zram-swap
swap-utils 

3)
How-to:
root@OpenWrt:~# mkswap /dev/sda1
mkswap: /dev/sda1: warning: wiping old swap signature.
Setting up swapspace version 1, size = 511 MiB (535818240 bytes)
no label, UUID=5413e04d-954e-493c-b26d-926a67af1bbc

root@OpenWrt:~# swapon -a
block: failed to swapon /dev/sda1

root@OpenWrt:~# cat /proc/swaps

cat: can't open '/proc/swaps': No such file or directory

So, I think, swap module was accidentally turned off during building firmware, because OpenWRT build version 18.06 works fine!

 


27.02.20213645Base systemBug ReportVery LowHighStateful DHCPv6 bugTrunkUnconfirmed Task Description

If the firmware compiled with the current source code uses Stateful DHCPv6, the IPv6 address cannot be obtained, but the DNS can be obtained. Please fix it.

26.02.20213643Base systemBug ReportVery LowLowiwinfo returns bad dataTrunkUnconfirmed Task Description

OpenWrt 19.07.7 r11306-c4a6851c72 / LuCI openwrt-19.07 branch git-21.054.03371-3b137b5
Device: Netgear R6120

Bad data returned by `iwinfo` for a wireless adapter connected via USB.

root@OpenWrt:~# iwinfo

wlan0     ESSID: "myssid0"
          Access Point: BA:AD:F0:0D:BA:AD
          Mode: Client  Channel: 9 (2.452 GHz)
          Tx-Power: 20 dBm  Link Quality: 51/70
          Signal: -59 dBm  Noise: unknown
          Bit Rate: 52.0 MBit/s
          Encryption: WPA2 PSK (TKIP, CCMP)
          Type: nl80211  HW Mode(s): 802.11bgn
          Hardware: 14C3:7628 14C3:0004 [MediaTek MT76x8]
          TX power offset: none
          Frequency offset: none
          Supports VAPs: yes  PHY name: phy0

wlan1     ESSID: "myssid1"
          Access Point: BA:AD:F0:0D:BA:DD
          Mode: Client  Channel: 44 (5.220 GHz)
          Tx-Power: 20 dBm  Link Quality: 43/70
          Signal: -67 dBm  Noise: unknown
          Bit Rate: 54.0 MBit/s
          Encryption: WPA2 PSK (TKIP, CCMP)
          Type: nl80211  HW Mode(s): 802.11nac
          Hardware: 14C3:7662 14C3:7662 [MediaTek MT76x2E]
          TX power offset: none
          Frequency offset: none
          Supports VAPs: yes  PHY name: phy1

wlan2     ESSID: "myssid2"
          Access Point: BA:AA:AD:F0:00:0D
          Mode: Client  Channel: 9 (2.452 GHz)
          Tx-Power: 20 dBm  Link Quality: 56/70
          Signal: -54 dBm  Noise: unknown
          Bit Rate: 150.0 MBit/s
          Encryption: WPA2 PSK (TKIP, CCMP)
          Type: nl80211  HW Mode(s): 802.11bgn
          Hardware: 14C3:7628 14C3:0004 [MediaTek MT76x8]
          TX power offset: none
          Frequency offset: none
          Supports VAPs: yes  PHY name: phy2

Notice that the same `Hardware` line is returned for `wlan0` and `wlan2` despite different MAC addresses and different `PHY names`.

The wlan2 hardware is the ALFA AWUS036NHA and `lsusb’ identifies it as:

root@OpenWrt:~# lsusb -v | grep ID

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0cf3:9271 Qualcomm Atheros Communications AR9271 802.11n
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

It is worth mentioning that the `wlan2` interface is fully functional.


Showing tasks 51 - 100 of 1150 Page 2 of 23 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing