OpenWrt/LEDE Project

Welcome to the OpenWrt/LEDE Project bug reporting and issue tracking system

Problems to be reported here are for the OpenWrt/LEDE Project targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt/LEDE Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to lede-bugs@infradead.org.

OpenedIDCategory  ascTask TypePrioritySeveritySummaryReported InStatus
05.11.20171148Base systemBug ReportVery LowHighAR7 images for Fritz!Box 7170 build but do not bootTrunkUnconfirmed Task Description

Hi there,
I’m trying to get the latest LEDE with Kernel 4.9 up and running with an old Fritz!Box 7170 (ar7/EVA).
The images build fine but they are not booting at all.

Is someone able to help? I have tried to collect the “internet knowledge” about this device in this github.
I also found some very old OpenWRT patches (1)(2) for whom I don’t know if they were ever integrated in master.
I’m not a developer myself, so I don’t even know how to integrate patches to try them out.

I also created a forum thread if anyone has some more tips or ideas.

06.11.20171153Base systemFeature RequestVery LowHighConsider security monitoring featuresTrunkUnconfirmed Task Description

I see it as email notification about security events.

Examples of security events:

  • Attempts to bruteforce SSH password.
  • Appear unknown MAC’s in network.
  • Deauthentication attacks on Wi-Fi.

Monitoring is very important part of security.

25.11.20171192Base systemBug ReportVery LowHigh2.4Ghz wifi AP on mt7621 / Afoundry EW1200 doesn't workTrunkUnconfirmed Task Description

Hi LEDE folks!

I’m running the latest snapshot (r5406-5e6792e) of LEDE on an Afoundry EW1200. It’s a vast improvement from the stock firmware - my heartfelt gratitude to the author(s) of the port.

There’s one problem. 5Ghz wifi works fine but 2.4Ghz doesn’t. It detects my 2.4Ghz device and when I hit “scan” in LuCI it returns a list of nearby SSIDs.

But when I try to configure the device as an access point it isn’t visible to any of my devices. I’ve tried various channels / settings but nothing makes a difference.

Steps to reproduce:

1. Install LEDE r5406-5e6792e snapshot (latest at the time of writing) on an Afoundry EW1200
2. Use opkg to install LuCI [NB: I don’t think LuCI is to blame; it’s just the interface I use]
3. In Network/Wireless hit “Scan” for “Generic MAC80211 802.11bgn” and verify it can detect other people’s networks
4. Back in Network/Wireless, hit add (or edit) to configure an access point on that device. Use any settings you like.
5. LuCI shows the AP as running but no other device can detect the SSID it’s broadcasting.

22.01.20181286Base systemBug ReportVery LowHighNetwork startup happens too late with kernel 4.14TrunkUnconfirmed Task Description

Software version: r5917-36f1978a70-x86-64, device: x86-64 PC.

I’ve built 2 versions - one with default kernel 4.9 and another one with kernel 4.14.

The version with kernel 4.9 works fine. Netifd sets up network interfaces, after that another daemons are started.

The version with kernel 4.14 does not work as expected. Another daemons are started before network interface setup. In my case, this prevents the VPN server from working correctly. I have to manually restart VPN service after every reboot. This may potentially affect another software.

I have attached the log files. Please note the startup order as found in the log files:

kernel 4.9: netifd interface setup → block → dropbear → xl2tpd → openvpn
kernel 4.14: block → dropbear → xl2tpd → openvpn → netifd interface setup

I have no idea how a kernel version may affect the startup order. Maybe there is a kind of race condition.


29.01.20181311Base systemBug ReportVery LowHighprocd: mount /tmp with zramTrunkNew Task Description

Supply the following if possible:
- Device problem occurs on all device
- Software versions of OpenWrt/LEDE: Trunk

If i select this option in menuconfig, At the boot procd mount the wrong size of ram. I have 512mb of ram and procd mount only 11mb of ram. More detail here.
http://lists.infradead.org/pipermail/lede-dev/2018-January/011008.html

https://forum.lede-project.org/t/no-space-left-in-tmp/11000/14


01.02.20181317Base systemBug ReportVery LowHighom2p-lc sysupgrade fails silentlyTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on Openmesh om2p-lc
- Software versions of OpenWrt/LEDE release, packages, etc.
LEDE Reboot SNAPSHOT r5360-a8a23ca

- Steps to reproduce
sysupgrade -n /tmp/lede-ar71xx-generic-om2p-squashfs-sysupgrade.bin
Sysupgrade appears to go through the motions but firmware doesn’t upgrade and doesn’t delete config files with the -n switch.
I’ve tried the factory and the sysupgrade file with the same results. This build upgrades as expedted with a tl-mr3420-v2 and tl-wr740n-v4.

Not sure if it’s related but the om-watchdog init script also fails to detect the board type so doesn’t start.
Changing this line in the /etc/init.d/om-watchdog init script gets the watchdog to start which make me think it’s an identification issue.
local board=$(ar71xx_board_name)
change to
local board=$(cat /tmp/sysinfo/board_name)

 


11.02.20181347Base systemBug ReportVery LowHighAsus WL500GP V2 reboots when you`re trying to send fileAllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

I`m using Asus WL500GP V2 with Huawei E3372s with HiLink fw (I tested stick fw too). I`ve tried all LEDE versions. You can reproduce easily, just try to attach file to letter, or send file to cloud. 99% that router will reboot.

16.03.20181437Base systemBug ReportVery LowHighTrunk r6421 not save configuration on ER3.TrunkUnconfirmed Task Description

Problem on ER3 r6421.

Flashing success, but not save configuration. Every time i'm reboot, router roll back to default config.

Here are serial output:

## Loading Linux kernel with entry point: 0xffffffff815efa20 ...
Bootloader: Done loading app on coremask: 0x3
[    0.000000] Linux version 4.14.25 (teq@teqdesk) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6302-0f54d96d24)) #0 SMP Sun Mar 18
[    0.000000] CVMSEG size: 2 cache lines (256 bytes)
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 000d0601 (Cavium Octeon+)
[    0.000000] Checking for the multiply/shift bug... no.
[    0.000000] Checking for the daddiu bug... no.
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 0000000005400000 @ 0000000002a00000 (usable)
[    0.000000]  memory: 0000000007c00000 @ 0000000008200000 (usable)
[    0.000000]  memory: 000000000fc00000 @ 0000000410000000 (usable)
[    0.000000]  memory: 0000000001826e20 @ 0000000001100000 (usable)
[    0.000000] Wasting 243712 bytes for tracking 4352 unused pages
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Using internal Device Tree.
[    0.000000] software IO TLB [mem 0x0398e000-0x0798e000] (64MB) mapped at [800000000398e000-800000000798dfff]
[    0.000000] Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
[    0.000000] Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000000000-0x00000000efffffff]
[    0.000000]   Normal   [mem 0x00000000f0000000-0x000000041fbfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000002925fff]
[    0.000000]   node   0: [mem 0x0000000002a00000-0x0000000007dfffff]
[    0.000000]   node   0: [mem 0x0000000008200000-0x000000000fdfffff]
[    0.000000]   node   0: [mem 0x0000000410000000-0x000000041fbfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000041fbfffff]
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 19 pages/cpu @80000000079f9000 s39344 r8192 d30288 u77824
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 126539
[    0.000000] Kernel command line: mtdparts=phys_mapped_flash:512k(boot0)ro,512k(boot1)ro,64k(eeprom)ro root=/dev/sda2 root0
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Memory: 396916K/513176K available (5086K kernel code, 330K rwdata, 1236K rodata, 1328K init, 16731K bss, 1162)
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 127
[   13.844962] clocksource: OCTEON_CVMCOUNT: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
[   13.855830] Calibrating delay loop (skipped) preset value.. 1000.00 BogoMIPS (lpj=2000000)
[   13.864040] pid_max: default: 32768 minimum: 301
[   13.868767] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[   13.875252] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[   13.882962] Checking for the daddi bug... no.
[   13.888198] Hierarchical SRCU implementation.
[   13.893207] smp: Bringing up secondary CPUs ...
[   13.898265] SMP: Booting CPU01 (CoreId  1)...
[   13.902655] CPU1 revision is: 000d0601 (Cavium Octeon+)
[   13.902885] smp: Brought up 1 node, 2 CPUs
[   13.916204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[   13.925852] futex hash table entries: 512 (order: 4, 65536 bytes)
[   13.932600] NET: Registered protocol family 16
[   13.947309] Not in host mode, PCI Controller not initialized
[   13.968490] SCSI subsystem initialized
[   13.972686] usbcore: registered new interface driver usbfs
[   13.978233] usbcore: registered new interface driver hub
[   13.983653] usbcore: registered new device driver usb
[   13.990959] clocksource: Switched to clocksource OCTEON_CVMCOUNT
[   13.998255] NET: Registered protocol family 2
[   14.003415] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[   14.010447] TCP bind hash table entries: 4096 (order: 5, 131072 bytes)
[   14.016998] TCP: Hash tables configured (established 4096 bind 4096)
[   14.023382] UDP hash table entries: 256 (order: 2, 24576 bytes)
[   14.029247] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[   14.035842] NET: Registered protocol family 1
[   14.041861] Crashlog allocated RAM at address 0x3f00000
[   14.047176] workingset: timestamp_bits=62 max_order=17 bucket_order=0
[   14.065676] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   14.071763] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[   14.086436] io scheduler noop registered
[   14.090468] io scheduler deadline registered (default)
[   14.096184] octeon_gpio 1070000000800.gpio-controller: OCTEON GPIO driver probed.
[   14.103985] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   14.111417] console [ttyS0] disabled
[   14.114893] 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 41, base_baud = 31250000) is a OCTEON
[   14.124683] console [ttyS0] enabled
[   14.124683] console [ttyS0] enabled
[   14.131607] bootconsole [early0] disabled
[   14.131607] bootconsole [early0] disabled
[   14.140285] 1180000000c00.serial: ttyS1 at MMIO 0x1180000000c00 (irq = 42, base_baud = 31250000) is a OCTEON
[   14.150793] octeon_rng octeon_rng: Octeon Random Number Generator
[   14.157467] cacheinfo: Failed to find cpu0 device node
[   14.162685] cacheinfo: Unable to detect cache hierarchy for CPU 0
[   14.175673] loop: module loaded
[   14.179780] of-flash 1f400000.nor: Can't get bank width from device tree
[   14.187061] libphy: mdio_octeon: probed
[   14.191005] [Firmware Warn]: /soc@0/mdio@1180000001800/ethernet-phy@7: Whitelisted compatible string. Please remove
[   14.202182] [Firmware Warn]: /soc@0/mdio@1180000001800/ethernet-phy@6: Whitelisted compatible string. Please remove
[   14.213362] [Firmware Warn]: /soc@0/mdio@1180000001800/ethernet-phy@5: Whitelisted compatible string. Please remove
[   14.224507] mdio_octeon 1180000001800.mdio: Probed
[   14.229932] libphy: Fixed MDIO Bus: probed
[   14.234303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   14.240892] ehci-platform: EHCI generic platform driver
[   14.246401] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   14.252671] ohci-platform: OHCI generic platform driver
[   14.258302] usbcore: registered new interface driver usb-storage
[   14.264425] octeon_wdt: Initial granularity 5 Sec
[   14.273052] Interface 0 has 3 ports (RGMII)
[   14.281525] octeon-hcd 16f0010000000.usbc: Octeon Host Controller
[   14.287752] octeon-hcd 16f0010000000.usbc: new USB bus registered, assigned bus number 1
[   14.295976] octeon-hcd 16f0010000000.usbc: irq 56, io mem 0x00000000
[   14.303455] hub 1-0:1.0: USB hub found
[   14.307394] hub 1-0:1.0: 1 port detected
[   14.311991] octeon-hcd 16f0010000000.usbc: Registered HCD for port 0 on irq 56
[   14.320877] NET: Registered protocol family 10
[   14.327445] Segment Routing with IPv6
[   14.331299] NET: Registered protocol family 17
[   14.335870] 8021q: 802.1Q VLAN Support v1.8
[   14.340407] Bootbus flash: Setting flash for 4MB flash at 0x1f800000
[   14.346967] phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000a7
[   14.357360] Amd/Fujitsu Extended Query Table at 0x0040
[   14.362566]   Amd/Fujitsu Extended Query version 1.1.
[   14.367649] phys_mapped_flash: Swapping erase regions for top-boot CFI table.
[   14.374815] number of CFI chips: 1
[   14.378278] 3 cmdlinepart partitions found on MTD device phys_mapped_flash
[   14.385191] Creating 3 MTD partitions on "phys_mapped_flash":
[   14.390979] 0x000000000000-0x000000080000 : "boot0"
[   14.397066] 0x000000080000-0x000000100000 : "boot1"
[   14.403212] 0x000000100000-0x000000110000 : "eeprom"
[   14.411056] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
[   14.418316] Waiting for root device /dev/sda2...
[   14.694990] usb 1-1: new high-speed USB device number 2 using octeon-hcd
[   15.157589] usb-storage 1-1:1.0: USB Mass Storage device detected
[   15.164285] scsi host0: usb-storage 1-1:1.0
[   16.377528] scsi 0:0:0:0: Direct-Access     SRT      USB              1100 PQ: 0 ANSI: 4
[   16.387726] sd 0:0:0:0: [sda] 15765504 512-byte logical blocks: (8.07 GB/7.52 GiB)
[   16.396124] sd 0:0:0:0: [sda] Write Protect is off
[   16.401790] sd 0:0:0:0: [sda] No Caching mode page found
[   16.407211] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   16.417477]  sda: sda1 sda2
[   16.423799] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   16.435439] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[   16.443711] Freeing unused kernel memory: 1328K
[   16.448300] This architecture does not have kernel memory protection.
[   16.979499] init: Console is alive
[   16.983324] init: - watchdog -
[   17.607797] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[   17.722469] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[   17.740277] init: - preinit -
[   18.930430] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   20.963071] eth0: 1000 Mbps Full duplex, port 0, queue 0
[   20.968484] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.208639] mount_root: rootdisk overlay filesystem has not been formatted yet
sh: mkfs.f2fs: not found
[   22.221786] mount_root: no usable overlay filesystem found, using tmpfs overlay
[   23.377720] random: crng init done
[   23.407105] urandom-seed: Seed file not found (/etc/urandom.seed)
[   23.538293] eth0: Link down
[   23.551669] procd: - early -
[   23.554692] procd: - watchdog -
[   24.221523] procd: - watchdog -
[   24.225235] procd: - ubus -
[   24.364194] procd: - init -
Please press Enter to activate this console.
[   24.943579] kmodloader: loading kernel modules from /etc/modules.d/*
[   24.964605] l2tp_core: L2TP core driver, V2.0
[   24.970234] l2tp_netlink: L2TP netlink interface
[   24.980069] gre: GRE over IPv4 demultiplexor driver
[   24.987409] ip_gre: GRE over IPv4 tunneling driver
[   25.001262] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   25.289771] Netfilter messages via NETLINK v0.30.
[   25.297611] ip_set: protocol 6
[   25.337788] cryptodev: driver 1.9 loaded.
[   25.358006] u32 classifier
[   25.360794]     input device check on
[   25.364596]     Actions configured
[   25.371338] Mirror/redirect action on
[   25.386211] nf_conntrack version 0.5.0 (3584 buckets, 14336 max)
[   25.405328] ip_tables: (C) 2000-2006 Netfilter Core Team
[   25.553490] ctnetlink v0.93: registering with nfnetlink.
[   25.698364] wireguard: WireGuard 0.0.20180304 loaded. See www.wireguard.com for information.
[   25.706931] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   25.765405] xt_time: kernel timezone is -0000
[   25.858495] PPP generic driver version 2.4.2
[   25.865711] PPP MPPE Compression module registered
[   25.872986] NET: Registered protocol family 24
[   25.879616] PPTP driver version 0.8.5
[   25.888062] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   25.896812] kmodloader: done loading kernel modules from /etc/modules.d/*
[   32.622166] br-lan: port 1(eth0) entered blocking state
[   32.627510] br-lan: port 1(eth0) entered disabled state
[   32.633218] device eth0 entered promiscuous mode
[   32.648210] br-lan: port 1(eth0) entered blocking state
[   32.653545] br-lan: port 1(eth0) entered forwarding state
[   32.659197] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   32.700308] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   33.645742] br-lan: port 1(eth0) entered disabled state
[   34.746429] eth0: 1000 Mbps Full duplex, port 0, queue 0
[   34.763064] br-lan: port 1(eth0) entered blocking state
[   34.768376] br-lan: port 1(eth0) entered forwarding state
[   34.807116] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   35.811122] eth1: 1000 Mbps Full duplex, port 1, queue 1
[   35.816578] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   39.261056] MTD: Attempt to mount non-MTD device "/dev/loop0"
27.04.20181520Base systemFeature RequestVery LowHighCOMFAST CF-E380AC Switch 'VLAN' FeaturesTrunkUnconfirmed Task Description

Currently on LEDE version: LEDE Reboot 17.01.4 r3560-79f57e422d / LuCI lede-17.01 branch (git-17.290.79498-d3f0685)

There is no Switch feature under LUCI menu Network. In other words, I’d like to create a VLAN tagging from the main router(which already has VLAN Switch capabilities) to be able to have VLAN capabilities for multiple WLAN Virtual Interfaces.

Is it possible to do this for this AP?
thanks

23.05.20181559Base systemBug ReportVery LowHighSystem fails to start up correctly, with 2 dnsmasq/ujai...TrunkUnconfirmed Task Description

I have noticed frequent problems with OpenWrt trunk: about 30% of the time it doesn’t start up correctly (but it seems to boot OK and dmesg messages seem fine), ps shows two dnsmasq/ujail processes (note: I’ve been using ujail for the past 2+ years, without serious problems other than  FS#878 ).

When OpenWrt gets stuck with 2 dnsmasq/ujail processes, invoking logread produces the error: “Failed to find log object: Not found” multiple times. If I kill the ujail/dnsmasq processes OpenWrt will just reboot (!)

I’ve tested this on two different OpenWrt VMs and on two different systems running VBox 5.1 and 5.2 under Ubuntu.

Here is what a ps looks like when the LEDE VM has booted normally:

root@10.0.3.141's password: 


BusyBox v1.28.3 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r6965-9c0ddafd46
 -----------------------------------------------------
root@OpenWrt:~# ps
  PID USER       VSZ STAT COMMAND
    1 root     13384 S    /sbin/procd
    2 root         0 SW   [kthreadd]
    3 root         0 IW   [kworker/0:0]
    4 root         0 IW<  [kworker/0:0H]
    5 root         0 IW   [kworker/u2:0]
    6 root         0 IW<  [mm_percpu_wq]
    7 root         0 SW   [ksoftirqd/0]
    8 root         0 IW   [rcu_sched]
    9 root         0 IW   [rcu_bh]
   10 root         0 SW   [migration/0]
   11 root         0 SW   [cpuhp/0]
   12 root         0 IW<  [netns]
   13 root         0 IW   [kworker/u2:1]
   17 root         0 IW   [kworker/0:1]
   95 root         0 SW   [oom_reaper]
   96 root         0 IW   [kworker/u2:2]
  232 root         0 IW<  [writeback]
  234 root         0 IW<  [crypto]
  235 root         0 IW<  [kintegrityd]
  237 root         0 IW<  [kblockd]
  304 root         0 IW<  [ata_sff]
  325 root         0 IW<  [watchdogd]
  379 root         0 IW   [kworker/u2:3]
  439 root         0 SW   [kswapd0]
  525 root         0 IW<  [pencrypt]
  527 root         0 IW<  [pdecrypt]
  554 root         0 IW<  [acpi_thermal_pm]
  623 root         0 SW   [scsi_eh_0]
  624 root         0 IW<  [scsi_tmf_0]
  627 root         0 SW   [scsi_eh_1]
  638 root         0 IW<  [scsi_tmf_1]
  641 root         0 SW   [scsi_eh_2]
  642 root         0 IW<  [scsi_tmf_2]
  645 root         0 IW<  [ipv6_addrconf]
  646 root         0 IW   [kworker/u2:4]
  724 root         0 IW<  [kworker/0:1H]
  732 root         0 IW<  [ext4-rsv-conver]
  818 root         0 IW<  [ext4-rsv-conver]
  973 root      9012 S    /sbin/ubusd
  978 root      2744 S    /sbin/askfirst /usr/libexec/login.sh
  979 root      3112 S    /bin/ash --login
 1273 root         0 IW<  [cfg80211]
 1512 root      7064 S    /sbin/logd -S 64
 1743 root     15564 S    /sbin/netifd
 1800 root     11260 S    /usr/sbin/odhcpd
 1860 root      2944 S    /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300 -T 3
 2149 root      3108 S    udhcpc -p /var/run/udhcpc-eth1.pid -s /lib/netifd/dhcp.script -f -t 0 -i eth1 -x hostname:OpenWrt -C -O 121
 2162 root      3108 S    udhcpc -p /var/run/udhcpc-eth2.pid -s /lib/netifd/dhcp.script -f -t 0 -i eth2 -x hostname:OpenWrt -C -O 121
 2169 root      3108 S    udhcpc -p /var/run/udhcpc-vlan40.pid -s /lib/netifd/dhcp.script -f -t 0 -i vlan40 -x hostname:OpenWrt -C -O 121
 2172 root      3108 S    udhcpc -p /var/run/udhcpc-vlan50.pid -s /lib/netifd/dhcp.script -f -t 0 -i vlan50 -x hostname:OpenWrt -C -O 121
 2687 root     10032 S    {dnsmasq} /sbin/ujail -n dnsmasq -u -l -r /dev/null -r /dev/urandom -r /etc/TZ -r /etc/dnsmasq.conf -r /etc/ethers -r /etc/group -r /etc/hosts -r /etc/passwd -r /sbin/hotplug-call 
 2700 dnsmasq  13612 S    /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c -k -x /var/run/dnsmasq/dnsmasq.cfg01411c.pid
 2705 root         0 IW   [kworker/0:2]
 2947 root      7092 S    /usr/sbin/softflowd -d -i eth0 -m 8192 -n 10.0.3.100:2055 -p /var/run/softflowd.pid -c /var/run/softflowd.ctl -v 5 -T full -s 100 -p /var/run/softflowd.pid
 2990 root      7908 S    /usr/lib/ipsec/starter --daemon charon --nofork
 3067 root     78176 S    /usr/lib/ipsec/charon
 3121 root      3112 S<   /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 1.gr.pool.ntp.org -p 0.europe.pool.ntp.org -p 2.europe.pool.ntp.org
 3921 root      3256 S    /bin/sh /usr/sbin/mwan3track wan eth1 online 10.0.3.141 8.8.4.4 208.67.222.222
 4500 root      3256 S    /bin/sh /usr/sbin/mwan3track wan2 eth2 online 10.0.3.70 8.8.8.8 208.67.220.220
 4912 root      3060 S    /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300 -T 3
 4917 root      3112 S    sleep 5
 4922 root      3112 S    sleep 5
 4923 root      3112 S    -ash
 4931 root      3108 R    ps
root@OpenWrt:~# uname -a
Linux OpenWrt 4.14.41 #0 SMP Mon May 21 16:07:48 2018 x86_64 GNU/Linux
root@OpenWrt:~# cat /etc/openwrt_*
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='SNAPSHOT'
DISTRIB_REVISION='r6965-9c0ddafd46'
DISTRIB_TARGET='x86/64'
DISTRIB_ARCH='x86_64'
DISTRIB_DESCRIPTION='OpenWrt SNAPSHOT r6965-9c0ddafd46'
DISTRIB_TAINTS=''
r6965-9c0ddafd46
root@OpenWrt:~#

And here is what ps on the same system (same VM, same /etc/config etc) looks like when it fails to work correctly:

  PID USER       VSZ STAT COMMAND
    1 root     13384 S    /sbin/procd
    2 root         0 SW   [kthreadd]
    3 root         0 IW   [kworker/0:0]
    4 root         0 IW<  [kworker/0:0H]
    5 root         0 IW   [kworker/u2:0]
    6 root         0 IW<  [mm_percpu_wq]
    7 root         0 SW   [ksoftirqd/0]
    8 root         0 IW   [rcu_sched]
    9 root         0 IW   [rcu_bh]
   10 root         0 SW   [migration/0]
   11 root         0 SW   [cpuhp/0]
   12 root         0 IW<  [netns]
   13 root         0 IW   [kworker/u2:1]
   29 root         0 IW   [kworker/0:1]
   75 root         0 SW   [oom_reaper]
   76 root         0 IW   [kworker/u2:2]
  232 root         0 IW<  [writeback]
  233 root         0 IW<  [crypto]
  235 root         0 IW<  [kintegrityd]
  236 root         0 IW<  [kblockd]
  238 root         0 IW<  [ata_sff]
  325 root         0 IW<  [watchdogd]
  438 root         0 SW   [kswapd0]
  524 root         0 IW<  [pencrypt]
  526 root         0 IW<  [pdecrypt]
  545 root         0 IW<  [acpi_thermal_pm]
  622 root         0 SW   [scsi_eh_0]
  623 root         0 IW<  [scsi_tmf_0]
  626 root         0 SW   [scsi_eh_1]
  637 root         0 IW<  [scsi_tmf_1]
  640 root         0 SW   [scsi_eh_2]
  641 root         0 IW<  [scsi_tmf_2]
  644 root         0 IW<  [ipv6_addrconf]
  645 root         0 IW   [kworker/u2:3]
  646 root         0 IW   [kworker/u2:4]
  728 root         0 IW<  [kworker/0:1H]
  732 root         0 IW<  [ext4-rsv-conver]
  818 root         0 IW<  [ext4-rsv-conver]
  973 root      9016 S    /sbin/ubusd
  978 root      2744 S    /sbin/askfirst /usr/libexec/login.sh
  979 root      3112 S    /bin/ash --login
 1269 root         0 IW<  [cfg80211]
 1801 root     11328 S    /usr/sbin/odhcpd
 2697 root     10032 S    {dnsmasq} /sbin/ujail -n dnsmasq -u -l -r /dev/null 
 2705 root     10032 R    {dnsmasq} /sbin/ujail -n dnsmasq -u -l -r /dev/null 
 2759 root      3108 R    ps
17.07.20181664Base systemBug ReportVery LowHighUnable to use wan port (dhcp or static ip is not workin...AllAssigned Task Description

Device: Belkin F9K1115 v2
Software version: OpenWrt 18.06.0-rc1, LEDE after r3466-f6907dc

Unable to use wan port on any new software version (last known working LEDE version is r3466-f6907dc).
DHCP is not getting ip address. After setting up static ip address there is no network communication.

22.07.20181686Base systemBug ReportVery LowHighMir3g random reboot/freezeTrunkUnconfirmed Task Description

Xiaomi Mi Router 3G r7519-1e83f775a3 / LuCI Master (git-18.199.46142-369553c)

i’m using a mir3g and weekly updating to the latest snapshot but from months i still having the same issue random reboots or in some cases, an amber led and what looks a freeze.

here the interesting parts i’ve found using /etc/syslog for logging (to avoid losing the log each reboot) when the reboots come up:

Fri Jul 20 05:36:04 2018 kern.alert kernel: [42728.145661] CPU 3 Unable to handle kernel paging request at virtual address 0000802f, epc == 8e9b1ae0, ra == 8e9b1994
Fri Jul 20 05:36:04 2018 kern.warn kernel: [42728.156261] Oops[#1]:
                                                                                                                  Fri Jul 20 05:36:07 2018 user.notice dnsmasq: DNS rebinding

...

Sat Jul 21 01:37:35 2018 kern.alert kernel: [72076.004853] CPU 1 Unable to handle kernel paging request at virtual address 07402008, epc == 80118aa0, ra == 8011a1f4
Sat Jul 21 01:37:35 2018 kern.warn kernel: [72076.015740] Oops[#1]:
Sat Jul 21 01:37:35 2018 kern.warn kernel: [72076.018010] CPU: 1 PID: 18600 Comm: nslookup Not tainted 4.14.54 #0
Sat Jul 21 01:37:38 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!

...

Sun Jul 22 04:30:12 2018 kern.alert kernel: [96742.276696] CPU 0 Unable to handle kernel paging request at virtual address 0000802f, epc == 8e991ae0, ra == 8e991994
Sun Jul 22 04:30:12 2018 kern.warn kernel: [96742.287301] Oops[#1]:
Sun Jul 22 04:30:15 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!

any guess to whats happening? i just have a faulty unit?

16.08.20181787Base systemBug ReportVery LowHighiw doesn't support wep with ibss adhocTrunkUnconfirmed Task Description

VoCore2 / OpenWrt SNAPSHOT, r7866-8c91807

Works:

# iw phy phy0 interface add f00 type ibss
# ip link set up f00
# iw dev f00 ibss join foobar 2412
root@tolppaB8D812x67_27402:~# iwinfo f00 info
f00 ESSID: “foobar”

        Access Point: B8:D8:12:67:6B:0A
        Mode: Ad-Hoc  Channel: 1 (2.412 GHz)
        Tx-Power: 0 dBm  Link Quality: unknown/70
        Signal: unknown  Noise: unknown
        Bit Rate: unknown
        Encryption: unknown
        Type: nl80211  HW Mode(s): 802.11bgn
        Hardware: unknown [Generic MAC80211]
        TX power offset: unknown
        Frequency offset: unknown
        Supports VAPs: yes  PHY name: phy0

Does NOT work:

# iw dev f00 ibss join foobar 2412 key d:0:42325d294a
Usage: iw [options] dev <devname> ibss join <SSID> <freq in MHz> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>] [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]

Join the IBSS cell with the given SSID, if it doesn’t exist create
it on the given frequency. When fixed frequency is requested, don’t
join/create a cell on a different frequency. When a fixed BSSID is
requested use that BSSID and do not adopt another cell’s BSSID even
if it has higher TSF and the same SSID. If an IBSS is created, create
it with the specified basic-rates, multicast-rate and beacon-interval.

Options:

  1. -debug enable netlink debugging
23.08.20181806Base systemBug ReportVery LowHighafter rebooting with a device connect, that port doesn'...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Device: Linksys E1700
Running: Trunk, but also tested positive with 17.01

After rebooting the E1700 router, that has a device connected, whos network card has enery saving activated, the link of the port, that the device is connected to, does not come up.

Tested with a Dell laptop with a Realtek PCIe GBE Familiy Controller, the driver options that needed to be deactivated were “Energy Efficient Ethernet” and “Green Ethernet”.
But the problem also happened with various thin clients and printers.

The log or dmesg does not show anything regarding this.


31.08.20181827Base systemBug ReportVery LowHighwhy has uci no package which depends on?AllUnconfirmed Task Description

Hi,
today I did a bad thing, which only could happen, because uci have no package which depends on: I uninstalled which my currently developed clean script uci package and after reboot the router doesnt came up again :D

But why is this main package no refereed anywhere?

Regards,
Thomas

02.09.20181829Base systemBug ReportVery LowHighERROR 'eth0: tx ring full' on BT Home Hub 2BAllUnconfirmed Task Description

Device: BT Home Hub 2B
Software: OpenWrt 18.06.X / LEDE 17.01.X

Never had error ‘eth0: tx ring full’ in Chaos Calmer and Barrier Breaker but now after fresh update my logs are full with error ‘eth0: tx ring full’

AFAIK Looks like driver issue:
Tx ring full errors with HH5a and it was an ethernet driver issue or something at the time when LEDE on HH5a wasn’t fully compatible with SMP.
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=2270fc5947a3cc3b7595ed22468425a4b10ebc30

Kernel Log:

[    0.000000] Linux version 4.4.92 (buildbot@debian8) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3556-46e29bd) ) #0 Mon Oct 16 15:21:43 2017
[    0.000000] SoC: Danube rev 1.5
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019641 (MIPS 24KEc)
[    0.000000] MIPS: machine is BTHOMEHUBV2B - BT Home Hub 2B
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 804704b0, node_mem_map 81007da0
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyLTQ0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00072538
[    0.000000] Readback ErrCtl register=00072538
[    0.000000] Memory: 58788K/65536K available (3884K kernel code, 156K rwdata, 620K rodata, 1212K init, 200K bss, 6748K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 333MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
[    0.000017] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
[    0.007955] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
[    0.050591] pid_max: default: 32768 minimum: 301
[    0.055565] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.062117] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.078972] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.088665] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.094920] pinctrl core: initialized pinctrl subsystem
[    0.102308] NET: Registered protocol family 16
[    0.115040] pinctrl-xway 1e100b10.pinmux: Init done
[    0.121547] dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels: 20
[    0.182342] Can't analyze schedule() prologue at 80009078
[    0.204445] PCI host bridge /fpi@10000000/pci@E105400 ranges:
[    0.210131]  MEM 0x0000000018000000..0x0000000019ffffff
[    0.215421]   IO 0x000000001ae00000..0x000000001affffff
[    0.247772] gpio-stp-xway 1e100bb0.stp: Init done
[    0.253699] usbcore: registered new interface driver usbfs
[    0.259334] usbcore: registered new interface driver hub
[    0.264760] usbcore: registered new device driver usb
[    0.270367] PCI host bridge to bus 0000:00
[    0.274424] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
[    0.281356] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
[    0.288293] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.295145] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.303231] pci 0000:00:0e.0: [168c:ff1d] type 00 class 0x020000
[    0.303324] pci 0000:00:0e.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[    0.303913] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.303989] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[    0.312148] clocksource: Switched to clocksource MIPS
[    0.319606] NET: Registered protocol family 2
[    0.325739] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.332707] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.339089] TCP: Hash tables configured (established 1024 bind 1024)
[    0.345673] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.351495] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.358186] NET: Registered protocol family 1
[    0.362627] PCI: CLS 0 bytes, default 32
[    0.376005] gptu: totally 6 16-bit timers/counters
[    0.380968] gptu: misc_register on minor 63
[    0.385105] gptu: succeeded to request irq 126
[    0.389607] gptu: succeeded to request irq 127
[    0.394120] gptu: succeeded to request irq 128
[    0.398634] gptu: succeeded to request irq 129
[    0.403148] gptu: succeeded to request irq 130
[    0.407662] gptu: succeeded to request irq 131
[    0.418932] lantiq,vmmc 1f103000.vmmc: requested GPIO 511
[    0.424282] lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x03a00000
[    0.432018] Crashlog allocated RAM at address 0x3f00000
[    0.476416] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.482185] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.499017] io scheduler noop registered
[    0.502883] io scheduler deadline registered (default)
[    0.509281] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[    0.518249] console [ttyLTQ0] enabled
[    0.525357] bootconsole [early0] disabled
[    0.534622] lantiq nor flash device: 00080000 at 10000000
[    0.538954] Found: AMD AM29LV400BB
[    0.541851] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank
[    0.547510] number of JEDEC chips: 1
[    0.551021] 5 ofpart partitions found on MTD device ltq_nor
[    0.556369] Creating 5 MTD partitions on "ltq_nor":
[    0.561103] 0x000000000000-0x000000040000 : "uboot"
[    0.572457] 0x000000040000-0x000000050000 : "uboot_env"
[    0.579853] 0x000000050000-0x000000060000 : "rg_conf_1"
[    0.587361] 0x000000060000-0x000000070000 : "rg_conf_2"
[    0.594878] 0x000000070000-0x000000080000 : "rg_conf_factory"
[    0.604299] nand: device found, Manufacturer ID: 0xec, Chip ID: 0x75
[    0.609065] nand: Samsung NAND 32MiB 3,3V 8-bit
[    0.613461] nand: 32 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[    0.620663] Scanning device for bad blocks
[    0.720375] 3 ofpart partitions found on MTD device 14000000.nand-parts
[    0.725486] Creating 3 MTD partitions on "14000000.nand-parts":
[    0.731235] 0x000000000000-0x000000004000 : "art"
[    0.739803] 0x000000004000-0x000000204000 : "kernel"
[    0.747145] 0x000000204000-0x000002000000 : "ubi"
[    0.812043] libphy: ltq_mii: probed
[    0.814549] adm6996: eth0: ADM6996M model PHY found.
[    0.822800] eth0: attached PHY [Infineon ADM6996] (phy_addr=1e180000.etop-ff:00, irq=-1)
[    0.831375] wdt 1f8803f0.watchdog: Init done
[    0.840503] NET: Registered protocol family 10
[    0.856664] NET: Registered protocol family 17
[    0.859717] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.871917] 8021q: 802.1Q VLAN Support v1.8
[    0.883843] UBI: auto-attach mtd7
[    0.885598] ubi0: attaching mtd7
[    1.336604] ubi0: scanning is finished
[    1.361954] ubi0: attached mtd7 (name "ubi", size 29 MiB)
[    1.365889] ubi0: PEB size: 16384 bytes (16 KiB), LEB size: 15872 bytes
[    1.372293] ubi0: min./max. I/O unit sizes: 512/512, sub-page size 256
[    1.378627] ubi0: VID header offset: 256 (aligned 256), data offset: 512
[    1.385133] ubi0: good PEBs: 1919, bad PEBs: 0, corrupted PEBs: 0
[    1.391045] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 92
[    1.397979] ubi0: max/mean erase counter: 51/38, WL threshold: 4096, image sequence number: 568085886
[    1.406930] ubi0: available PEBs: 0, total reserved PEBs: 1919, PEBs reserved for bad PEB handling: 40
[    1.416993] ubi0: background thread "ubi_bgt0d" started, PID 370
[    1.432449] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 372
[    1.446277] UBIFS (ubi0:0): recovery needed
[    1.503907] UBIFS (ubi0:0): recovery completed
[    1.507083] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.514096] UBIFS (ubi0:0): LEB size: 15872 bytes (15 KiB), min./max. I/O unit sizes: 512 bytes/512 bytes
[    1.523377] UBIFS (ubi0:0): FS size: 29474304 bytes (28 MiB, 1857 LEBs), journal size 4031488 bytes (3 MiB, 254 LEBs)
[    1.533674] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[    1.539350] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 826B888B-9DA3-431E-9A6B-20C249A26A8E, small LPT model
[    1.551985] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    1.564257] Freeing unused kernel memory: 1212K
[    1.867673] init: Console is alive
[    1.870177] init: - watchdog -
[    2.421913] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.819449] SCSI subsystem initialized
[    3.732545] dwc2 1e101000.ifxhcd: DWC OTG Controller
[    3.736063] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
[    3.743224] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[    3.750773] hub 1-0:1.0: USB hub found
[    3.753929] hub 1-0:1.0: 1 port detected
[    3.780073] usbcore: registered new interface driver usb-storage
[    3.785942] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.799938] init: - preinit -
[    3.956660] dwc2 1e101000.ifxhcd: Mode Mismatch Interrupt: currently in Host mode
[    3.962665] dwc2 1e101000.ifxhcd: Mode Mismatch Interrupt: currently in Host mode
[    4.152328] usb 1-1: new high-speed USB device number 2 using dwc2
[    4.157465] dwc2 1e101000.ifxhcd: Mode Mismatch Interrupt: currently in Host mode
[    4.164318] dwc2 1e101000.ifxhcd: Mode Mismatch Interrupt: currently in Host mode
[    4.284665] random: procd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[    4.374437] usb-storage 1-1:1.0: USB Mass Storage device detected
[    4.393897] scsi host0: usb-storage 1-1:1.0
[    5.581867] scsi 0:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
[    5.593162] sd 0:0:0:0: [sda] 7907328 512-byte logical blocks: (4.05 GB/3.77 GiB)
[    5.601593] sd 0:0:0:0: [sda] Write Protect is off
[    5.604986] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    5.605816] sd 0:0:0:0: [sda] No Caching mode page found
[    5.610108] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    5.622842]  sda: sda1 sda2
[    5.630553] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    7.527028] mount_root: mounting /dev/root
[    7.539146] mount_root: loading kmods from internal overlay
[    7.617329] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    7.631272] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    7.949318] block: attempting to load /etc/config/fstab
[    7.963471] block: extroot: not configured
[    7.974180] urandom-seed: Seeding with /etc/urandom.seed
[    8.048661] procd: - early -
[    8.052712] procd: - watchdog -
[    8.722006] procd: - watchdog -
[    8.724598] procd: - ubus -
[    8.823854] random: ubusd: uninitialized urandom read (4 bytes read, 99 bits of entropy available)
[    8.915088] random: ubusd: uninitialized urandom read (4 bytes read, 104 bits of entropy available)
[    8.924917] random: ubusd: uninitialized urandom read (4 bytes read, 104 bits of entropy available)
[    8.934829] random: ubusd: uninitialized urandom read (4 bytes read, 104 bits of entropy available)
[    8.948583] random: ubusd: uninitialized urandom read (4 bytes read, 105 bits of entropy available)
[    8.956929] random: ubusd: uninitialized urandom read (4 bytes read, 106 bits of entropy available)
[    8.970312] random: ubusd: uninitialized urandom read (4 bytes read, 106 bits of entropy available)
[    8.982395] random: ubusd: uninitialized urandom read (4 bytes read, 107 bits of entropy available)
[    8.992604] procd: - init -
[    9.112780] random: nonblocking pool is initialized
[    9.697524] EXT4-fs (sda1): recovery complete
[    9.708266] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
[    9.869733] Adding 131068k swap on /dev/sda2.  Priority:-1 extents:1 across:131068k 
[   10.649637] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.705291] NET: Registered protocol family 8
[   10.708230] NET: Registered protocol family 20
[   10.766653] PPP generic driver version 2.4.2
[   10.800662] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.836600] Netfilter messages via NETLINK v0.30.
[   10.867047] ip_set: protocol 6
[   11.102095] IFX MEI Version 5.00.00
[   11.164986] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
[   11.193819] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[   11.200308] Backport generated by backports.git backports-20160324-13-g24da7d3c
[   11.215403] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.241502] ATM1.0.26    ATM (A1) firmware version 0.17
[   11.245278] ifxmips_atm: ATM init succeed
[   11.273765] Infineon Technologies DEU driver version 2.0.0 
[   11.277881] Danube Chip ver. 1.4 detected. 
[   11.304814] IFX DEU DES initialized (multiblock).
[   11.316430] IFX DEU AES initialized (multiblock).
[   11.320088] IFX DEU SHA1 initialized.
[   11.328559] IFX DEU MD5 initialized.
[   11.403678] nf_conntrack version 0.5.0 (937 buckets, 3748 max)
[   11.473797] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[   11.482245] owl-loader 0000:00:0e.0: fixup device configuration
[   11.488672] pci 0000:00:0e.0: [168c:0027] type 00 class 0x028000
[   11.488769] pci 0000:00:0e.0: reg 0x10: [mem 0x18000000-0x1800ffff]
[   11.488914] pci 0000:00:0e.0: PME# supported from D0 D3hot
[   11.489471] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[   11.508762] NET: Registered protocol family 24
[   11.571400] xt_time: kernel timezone is -0000
[   12.299381] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[   12.311148] ath: phy0: eeprom contains invalid mac address: 00:00:00:00:00:00
[   12.316847] ath: phy0: random mac address will be used: 46:96:39:84:34:8f
[   12.325201] ath: EEPROM regdomain: 0x37
[   12.325234] ath: EEPROM indicates we should expect a direct regpair map
[   12.325259] ath: Country alpha2 being used: AW
[   12.325280] ath: Regpair used: 0x37
[   12.337914] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.346954] ieee80211 phy0: Atheros AR9160 MAC/BB Rev:1 AR2133 RF Rev:b0 mem=0xb8000000, irq=30
[   12.408872] kmodloader: done loading kernel modules from /etc/modules.d/*
[   21.036879] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.055493] device eth0 entered promiscuous mode
[   21.072987] device eth0.1 entered promiscuous mode
[   21.087893] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   21.195851] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   22.397238] ath: EEPROM regdomain: 0x8348
[   22.397275] ath: EEPROM indicates we should expect a country code
[   22.397303] ath: doing EEPROM country->regdmn map search
[   22.397330] ath: country maps to regdmn code: 0x3a
[   22.397353] ath: Country alpha2 being used: US
[   22.397374] ath: Regpair used: 0x3a
[   22.397400] ath: regdomain 0x8348 dynamically updated by user
[   22.820387] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.836380] br-lan: port 1(eth0.1) entered forwarding state
[   22.840598] br-lan: port 1(eth0.1) entered forwarding state
[   22.846334] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   22.900283] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   24.844967] br-lan: port 1(eth0.1) entered forwarding state
[   25.327990] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.397359] device wlan0 entered promiscuous mode
[   28.242596] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   28.247775] br-lan: port 2(wlan0) entered forwarding state
[   28.252884] br-lan: port 2(wlan0) entered forwarding state
[   30.330900] br-lan: port 2(wlan0) entered forwarding state
[   32.691560] device wlan0.sta1 entered promiscuous mode
[   32.720871] br-lan: port 3(wlan0.sta1) entered forwarding state
[   32.725417] br-lan: port 3(wlan0.sta1) entered forwarding state
[   34.728242] br-lan: port 3(wlan0.sta1) entered forwarding state
[   39.668604] IPv6: ADDRCONF(NETDEV_UP): nas0: link is not ready
[   63.980800] [DSL_BSP_Showtime 894]: Datarate US intl = 1092666, fast = 0
[   63.986100] enter showtime, cell rate: 0 - 2577, 1 - 2577, xdata addr: 0x82be0000
[   63.993605] IPv6: ADDRCONF(NETDEV_CHANGE): nas0: link becomes ready
[   64.997268] eth0: tx ring full
[   65.968358] pppoe-wan: renamed from ppp0
[ 1751.047399] eth0: tx ring full
[ 1902.521176] eth0: tx ring full
[ 2143.258160] eth0: tx ring full
[ 2146.518662] eth0: tx ring full
[ 2223.428482] eth0: tx ring full
[ 2239.888722] eth0: tx ring full
[ 2243.247973] eth0: tx ring full
[ 2245.054283] eth0: tx ring full
[ 2246.288345] eth0: tx ring full
[ 2249.611091] eth0: tx ring full
[ 2250.455924] eth0: tx ring full
[ 2250.588518] eth0: tx ring full
[ 2258.861419] eth0: tx ring full
[ 2269.827816] eth0: tx ring full
[ 2272.862209] eth0: tx ring full
[ 2425.515514] eth0: tx ring full
[ 2516.783749] eth0: tx ring full
[ 2519.607658] eth0: tx ring full
[ 2601.461745] eth0: tx ring full
[ 2627.816628] eth0: tx ring full
[ 2627.864844] eth0: tx ring full
[ 2673.692438] eth0: tx ring full
[ 2673.762416] eth0: tx ring full
[ 2673.965346] eth0: tx ring full
[ 2674.499868] eth0: tx ring full
[ 2705.647434] eth0: tx ring full
[ 2708.611170] eth0: tx ring full
[ 2723.844603] eth0: tx ring full
[ 2807.813737] eth0: tx ring full
[ 2808.729392] eth0: tx ring full
[ 2816.697257] eth0: tx ring full
[ 2817.261323] eth0: tx ring full
[ 6328.327726] eth0: tx ring full
[ 6328.392700] eth0: tx ring full
[ 6328.861733] eth0: tx ring full
[15735.570622] eth0: tx ring full
[15738.884784] eth0: tx ring full
[15807.460162] eth0: tx ring full
[15808.438141] eth0: tx ring full
[15811.414092] eth0: tx ring full
[15896.230719] eth0: tx ring full
[15898.720603] eth0: tx ring full
[15898.882255] eth0: tx ring full
[15898.970973] eth0: tx ring full
[15899.126641] eth0: tx ring full
[15901.567257] eth0: tx ring full
[15984.121757] eth0: tx ring full
[19100.498356] eth0: tx ring full
[19100.951005] eth0: tx ring full
[19106.852503] eth0: tx ring full
[19116.416185] eth0: tx ring full
[19158.015643] eth0: tx ring full
[19766.978194] eth0: tx ring full
[19767.148348] eth0: tx ring full
[19767.463950] eth0: tx ring full
[19767.699791] eth0: tx ring full
[19769.093434] eth0: tx ring full
[19872.692062] eth0: tx ring full
[19954.218597] eth0: tx ring full
[20011.519744] eth0: tx ring full
[20012.013685] eth0: tx ring full
[20303.519192] eth0: tx ring full
[20303.570231] eth0: tx ring full
[20303.652010] eth0: tx ring full
[20303.971342] eth0: tx ring full
[20304.749457] eth0: tx ring full
[20305.500198] eth0: tx ring full
[20385.854344] eth0: tx ring full
[20385.905612] eth0: tx ring full
[20385.945290] eth0: tx ring full
[20385.990692] eth0: tx ring full
[20386.075070] eth0: tx ring full
[20392.962606] eth0: tx ring full
[22038.952618] eth0: tx ring full
[22039.499593] eth0: tx ring full
[22040.007869] eth0: tx ring full
[22040.189527] eth0: tx ring full
[22040.574095] eth0: tx ring full
[22040.612443] eth0: tx ring full
[22040.926333] eth0: tx ring full
[22659.864758] eth0: tx ring full
[22660.495852] eth0: tx ring full
[23257.228391] eth0: tx ring full
[23257.455571] eth0: tx ring full
[23257.603409] eth0: tx ring full
[23257.858200] eth0: tx ring full
[23258.046592] eth0: tx ring full
[25625.135877] eth0: tx ring full
[27730.082270] eth0: tx ring full
[27947.034117] eth0: tx ring full
[28025.635456] eth0: tx ring full
[28029.978561] eth0: tx ring full
[28112.744005] eth0: tx ring full
[28165.999901] eth0: tx ring full
[28166.173177] eth0: tx ring full
[28441.978538] eth0: tx ring full
[30040.128186] eth0: tx ring full
[30043.621253] eth0: tx ring full
[30045.811829] eth0: tx ring full
[30047.869733] eth0: tx ring full
[30103.293326] eth0: tx ring full
[30197.794092] eth0: tx ring full
[30199.050076] eth0: tx ring full
[30199.087910] eth0: tx ring full
[30199.423788] eth0: tx ring full
[34320.258818] eth0: tx ring full
[34320.377395] eth0: tx ring full
[34421.763795] eth0: tx ring full
[34422.045893] eth0: tx ring full
[34500.449922] eth0: tx ring full
[34500.841984] eth0: tx ring full
[34501.007997] eth0: tx ring full
[34707.465573] eth0: tx ring full
[34757.853116] eth0: tx ring full
[34758.050283] eth0: tx ring full
[34784.592386] eth0: tx ring full
[35146.884188] eth0: tx ring full
[35146.981132] eth0: tx ring full
[35146.988358] eth0: tx ring full
[35146.999077] eth0: tx ring full
[35150.009918] eth0: tx ring full
[36428.384476] eth0: tx ring full
[36428.621859] eth0: tx ring full
[38141.261431] eth0: tx ring full
[42949.938947] eth0: tx ring full
[42950.774024] eth0: tx ring full
[42950.876050] eth0: tx ring full
[42950.943942] eth0: tx ring full
[42951.016924] eth0: tx ring full
[42951.366590] eth0: tx ring full
[42951.465679] eth0: tx ring full
[42951.597091] eth0: tx ring full
[42951.664815] eth0: tx ring full
[42952.438956] eth0: tx ring full
[42952.516928] eth0: tx ring full
[42952.677737] eth0: tx ring full
[42952.726861] eth0: tx ring full
[42952.777372] eth0: tx ring full
[42952.828522] eth0: tx ring full
[42952.910972] eth0: tx ring full
[42952.966874] eth0: tx ring full
[42953.043049] eth0: tx ring full
[42953.086207] eth0: tx ring full
[42953.161355] eth0: tx ring full
[42953.204563] eth0: tx ring full
[42953.283231] eth0: tx ring full
[42953.366556] eth0: tx ring full
[42953.412652] eth0: tx ring full
[42953.458071] eth0: tx ring full
[42959.640264] eth0: tx ring full
[42960.281323] eth0: tx ring full
[42960.367638] eth0: tx ring full
[42960.419640] eth0: tx ring full
[42960.472884] eth0: tx ring full
[42960.514275] eth0: tx ring full
[42964.767985] eth0: tx ring full
[42964.881546] eth0: tx ring full
[43931.097063] pppoe-wan: renamed from ppp0
[43932.265643] eth0: tx ring full
[43932.320769] eth0: tx ring full
[43932.646469] eth0: tx ring full
[43935.744613] eth0: tx ring full
[43936.857861] eth0: tx ring full
[43938.431392] eth0: tx ring full
[43939.592561] eth0: tx ring full
[43944.827019] eth0: tx ring full
[43945.171647] eth0: tx ring full
[43951.549923] eth0: tx ring full
[43959.589918] eth0: tx ring full
[43959.655578] eth0: tx ring full
[43970.269586] eth0: tx ring full
[43987.025093] eth0: tx ring full
[43987.084833] eth0: tx ring full
[43987.159852] eth0: tx ring full
[44000.843294] eth0: tx ring full
[44000.903274] eth0: tx ring full
[44001.027860] eth0: tx ring full
[44028.851443] eth0: tx ring full
[44030.381791] eth0: tx ring full
[44030.440126] eth0: tx ring full
[44030.592628] eth0: tx ring full
[44036.931336] eth0: tx ring full
[44038.468842] eth0: tx ring full
[44038.504444] eth0: tx ring full
[44053.817125] eth0: tx ring full
[44057.927477] eth0: tx ring full
[44058.029306] eth0: tx ring full
[44060.524705] eth0: tx ring full
[44060.564667] eth0: tx ring full
[44060.686983] eth0: tx ring full
[44060.889996] eth0: tx ring full
[44061.908728] eth0: tx ring full
[44062.137966] eth0: tx ring full
[44063.344457] eth0: tx ring full
[44065.908146] eth0: tx ring full
[44068.721678] eth0: tx ring full
[44069.998352] eth0: tx ring full
[44074.904293] eth0: tx ring full
[44076.275575] eth0: tx ring full
[44078.774601] eth0: tx ring full
[44079.733673] eth0: tx ring full
[44079.881001] eth0: tx ring full
[44079.936465] eth0: tx ring full
[44080.897424] eth0: tx ring full
[44081.065809] eth0: tx ring full
[44082.301993] eth0: tx ring full
[44083.516338] eth0: tx ring full
[44083.584709] eth0: tx ring full
[44090.647089] eth0: tx ring full
[44113.244090] eth0: tx ring full
[44115.043025] eth0: tx ring full
[44118.121896] eth0: tx ring full
[44118.173463] eth0: tx ring full
[44119.031389] eth0: tx ring full
[44119.187683] eth0: tx ring full
[44119.249342] eth0: tx ring full
[44119.341213] eth0: tx ring full
[44122.446277] eth0: tx ring full
[44122.533108] eth0: tx ring full
[44129.895672] eth0: tx ring full
[44129.970884] eth0: tx ring full
[44130.052009] eth0: tx ring full
[44131.758292] eth0: tx ring full
[44131.838356] eth0: tx ring full
[44131.857476] eth0: tx ring full
[44131.919245] eth0: tx ring full
[44132.208855] eth0: tx ring full
[44132.268486] eth0: tx ring full
[44133.238833] eth0: tx ring full
[44133.632305] eth0: tx ring full
[44133.734402] eth0: tx ring full
[44134.254265] eth0: tx ring full
[44134.331669] eth0: tx ring full
[44136.437244] eth0: tx ring full
[44137.623479] eth0: tx ring full
[44154.038566] eth0: tx ring full
[44154.224960] eth0: tx ring full
[44154.468457] eth0: tx ring full
[44154.526942] eth0: tx ring full
[44154.604220] eth0: tx ring full
[44157.831404] eth0: tx ring full
[44157.895271] eth0: tx ring full
[44160.213616] eth0: tx ring full
[44164.852913] eth0: tx ring full
[44164.925561] eth0: tx ring full
[44165.046691] eth0: tx ring full
[44175.791876] eth0: tx ring full
[44176.003264] eth0: tx ring full
[44179.011414] eth0: tx ring full
[44179.060776] eth0: tx ring full
[44179.201263] eth0: tx ring full
[44180.631599] eth0: tx ring full
[44180.772604] eth0: tx ring full
[44180.892723] eth0: tx ring full
[44182.629672] eth0: tx ring full
[44182.689600] eth0: tx ring full
[44182.827388] eth0: tx ring full
[44183.375535] eth0: tx ring full
[44184.035557] eth0: tx ring full
[44184.117316] eth0: tx ring full
[44186.884009] eth0: tx ring full
[44189.970561] eth0: tx ring full
[44191.964088] eth0: tx ring full
[44192.056210] eth0: tx ring full
[44194.203009] eth0: tx ring full
[44195.170466] eth0: tx ring full
[44199.248112] eth0: tx ring full
[44199.342721] eth0: tx ring full
[44201.251077] eth0: tx ring full
[44202.152566] eth0: tx ring full
[44202.197567] eth0: tx ring full
[44203.186316] eth0: tx ring full
[44203.367517] eth0: tx ring full
[44203.410356] eth0: tx ring full
[44204.290746] eth0: tx ring full
[44204.363743] eth0: tx ring full
[44204.452740] eth0: tx ring full
[44204.600115] eth0: tx ring full
[44204.835943] eth0: tx ring full
[44204.891838] eth0: tx ring full
[44204.960019] eth0: tx ring full
[44207.703249] eth0: tx ring full
[44207.764557] eth0: tx ring full
[44208.078064] eth0: tx ring full
[44208.220652] eth0: tx ring full
[44208.317662] eth0: tx ring full
[44210.403972] eth0: tx ring full
[44210.812393] eth0: tx ring full
[44211.382622] eth0: tx ring full
[44212.199571] eth0: tx ring full
[44213.240191] eth0: tx ring full
[44222.213585] eth0: tx ring full
[44222.342522] eth0: tx ring full
[44222.591659] eth0: tx ring full
[44224.944630] eth0: tx ring full
[44228.974362] eth0: tx ring full
[44232.074372] eth0: tx ring full
[44232.169398] eth0: tx ring full
[44234.279705] eth0: tx ring full
[44234.990763] eth0: tx ring full
[44235.034239] eth0: tx ring full
[44237.443078] eth0: tx ring full
[44237.498241] eth0: tx ring full
[44238.950094] eth0: tx ring full
[44239.166380] eth0: tx ring full
[44239.209307] eth0: tx ring full
[44241.447317] eth0: tx ring full
[44242.333302] eth0: tx ring full
[44242.438482] eth0: tx ring full
[44242.569456] eth0: tx ring full
[44243.551450] eth0: tx ring full
[44244.838978] eth0: tx ring full
[44245.373908] eth0: tx ring full
[44245.813051] eth0: tx ring full
[44245.961066] eth0: tx ring full
[44246.785065] eth0: tx ring full
[44246.934422] eth0: tx ring full
[44247.953745] eth0: tx ring full
[44248.155734] eth0: tx ring full
[44248.351817] eth0: tx ring full
[44249.150433] eth0: tx ring full
[44251.751469] eth0: tx ring full
[44252.416446] eth0: tx ring full
[44253.567632] eth0: tx ring full
[44253.811640] eth0: tx ring full
[44254.331076] eth0: tx ring full
[44254.512355] eth0: tx ring full
[44254.720964] eth0: tx ring full
[44255.060524] eth0: tx ring full
[44255.127890] eth0: tx ring full
[44255.341410] eth0: tx ring full
[44257.121620] eth0: tx ring full
[44257.522704] eth0: tx ring full
[44257.937704] eth0: tx ring full
[44258.044733] eth0: tx ring full
[44259.710335] eth0: tx ring full
[44260.036279] eth0: tx ring full
[44260.101380] eth0: tx ring full
[44262.128394] eth0: tx ring full
[44262.191577] eth0: tx ring full
[44263.366937] eth0: tx ring full
[44265.131213] eth0: tx ring full
[44265.215646] eth0: tx ring full
[44266.845842] eth0: tx ring full
[44268.178983] eth0: tx ring full
[44269.397868] eth0: tx ring full
[44270.357064] eth0: tx ring full
[44271.942117] eth0: tx ring full
[44273.757873] eth0: tx ring full
[44273.985943] eth0: tx ring full
[44275.192835] eth0: tx ring full
[44275.288859] eth0: tx ring full
[44276.801024] eth0: tx ring full
[44279.229953] eth0: tx ring full
[44279.410629] eth0: tx ring full
[44279.473978] eth0: tx ring full
[44279.540150] eth0: tx ring full
[44279.905535] eth0: tx ring full
[44280.156999] eth0: tx ring full
[44280.295102] eth0: tx ring full
[44281.907118] eth0: tx ring full
[44282.198669] eth0: tx ring full
[44282.263901] eth0: tx ring full
[44282.934479] eth0: tx ring full
[44287.074998] eth0: tx ring full
[44288.402639] eth0: tx ring full
[44289.705923] eth0: tx ring full
[44289.935390] eth0: tx ring full
[44290.079374] eth0: tx ring full
[44290.148217] eth0: tx ring full
[44290.492600] eth0: tx ring full
[44290.886904] eth0: tx ring full
[44291.022995] eth0: tx ring full
[44291.542185] eth0: tx ring full
[44291.609559] eth0: tx ring full
[44291.702125] eth0: tx ring full
[44291.913105] eth0: tx ring full
[44294.118224] eth0: tx ring full
[44294.487795] eth0: tx ring full
[44297.213695] eth0: tx ring full
[44297.273446] eth0: tx ring full
[44297.424169] eth0: tx ring full
[44297.725371] eth0: tx ring full
[44297.964964] eth0: tx ring full
[44298.178107] eth0: tx ring full
[44298.279994] eth0: tx ring full
[44298.341052] eth0: tx ring full
[44298.709637] eth0: tx ring full
[44298.902312] eth0: tx ring full
[44299.107444] eth0: tx ring full
[44303.382071] eth0: tx ring full
[44303.467378] eth0: tx ring full
[44303.881013] eth0: tx ring full
[44304.706256] eth0: tx ring full
[44305.250907] eth0: tx ring full
[44306.923757] eth0: tx ring full
[44307.201797] eth0: tx ring full
[44307.306359] eth0: tx ring full
[44307.571467] eth0: tx ring full
[44308.677420] eth0: tx ring full
[44309.572257] eth0: tx ring full
[44310.354243] eth0: tx ring full
[44310.464527] eth0: tx ring full
[44311.364942] eth0: tx ring full
[44312.279103] eth0: tx ring full
[44312.516491] eth0: tx ring full

Using Lede 17.01.4:

BusyBox v1.25.1 () built-in shell (ash)

     _________
    /        /\      _    ___ ___  ___
   /  LE    /  \    | |  | __|   \| __|
  /    DE  /    \   | |__| _|| |) | _|
 /________/  LE  \  |____|___|___/|___|                      lede-project.org
 \        \   DE /
  \    LE  \    /  -----------------------------------------------------------
   \  DE    \  /    Reboot (17.01.4, r3560-79f57e422d)
    \________\/    -----------------------------------------------------------


13.09.20181844Base systemBug ReportVery LowHighR7800 ipv6 connectivityTrunkUnconfirmed Task Description

Hello,

ipv6 does not work properly on my Netgear R7800. I am running OpenWrt 18.6.1. The device gets a ipv6 address assigned, but I cannot ping any ipv6 address. Furthermore, I get the following error:
# ping6 google.de
PING google.de (2607:f8b0:4000:817::2003): 56 data bytes
ping6: sendto: Permission denied

After running the command
# tcpdump -i eth0 -vv
for some time, ipv6 connectivity works, I am able to ping an ipv6 address, also pinging from another host and establishing v6 connections is working.
# ping6 google.de
PING google.de (2607:f8b0:4000:817::2003): 56 data bytes
64 bytes from 2607:f8b0:4000:817::2003: seq=0 ttl=51 time=118.360 ms
64 bytes from 2607:f8b0:4000:817::2003: seq=1 ttl=51 time=118.626 ms

However, after some time, this is not working anymore and I have to restart the tcpdump command.

This must be a device specific issue, since my other Netgear Router (WNDR3700) running 18.06.1 is working flawlessly.


07.10.20181883Base systemBug ReportVery LowHighWAN interface VLAN not working on AVM FRITZ!Box 4040TrunkUnconfirmed Task Description

WAN interface of AVM FRITZ!Box 4040 is on eth1. To gain internet connectivity the ISP requires VLAN tagging with ID 7. But while I can send packets through interface eth1, I cannot through eth1.7.

Affected device: https://openwrt.org/toh/hwdata/avm/avm_fritz_box_4040 Affected versions: All I have tested, that is: 18.06.1 and the snapshot available today.

I haven’t seen any disturbing firewall rules and it still doesn’t work after flushing iptables completely.

Steps to reproduce:

- flash OpenWrt 18.06.1 to FRITZ!Box 4040
- change WAN ifname to eth1.7
- connect WAN port to laptop or monitoring device with Wireshark or similar
- send something via eth1.7, e.g. ping, but dhcp or pppd are sending stuff anyway

What happens:

Monitoring device does not see pings, dhcp, pppoe or other packets that go through eth1.7. It received when sending via eth1 directly (untagged). When sniffing via tcpdump on the router, it looks like the packets are send, but they are actually not going over the wire.

What should happen:

VLAN tagged packets are send properly (so PPPoE discovery succeeds in the end).

It was advised to open this bug report in the following forum thread. There is also some more information including configuration dumps. https://forum.openwrt.org/t/vlan-configuration-for-telekom/21841

13.10.20181893Base systemBug ReportVery LowHighRouting/NAT Offloading now working with VoIP/IPTV VLANsTrunkUnconfirmed Task Description

I’m using the latest build OpenWrt 18.06.1 r7258-5eb055306f / LuCI openwrt-18.06 branch (git-18.284.42397-55ebe88)

With ZBT-WG3526 (16M), MediaTek MT7621 ver:1 eco:3.

I’ve VLANs for VoIP and IPTV.

If I enable Routing/NAT Offloading (tried both options (software and hardware), it looks that this feature doesn’t allows the VoIP and IPTV traffic to work as it was doing previously.+

I know this is experimental and may be still needs some more testing, etc., but I just wanted to let the developers know about this issue, in case, they haven’t realized it.

29.10.20181917Base systemBug ReportVery LowHighMT7621 hw offloading crashingTrunkUnconfirmed Task Description

I’m using the latest build OpenWrt 18.06.1 r7258-5eb055306f / LuCI openwrt-18.06 branch (git-18.284.42397-55ebe88)

With ZBT-WG3526 (16M), MediaTek MT7621 ver:1 eco:3.

Using HW offloading makes systems unstable after less than 24 hours.

I’ve tested it during several days. Now using SW offloading seems to be working ok.

I’ve posted traces here:

https://forum.openwrt.org/t/mt7621-offloading-reboots/24043

01.11.20181922Base systemBug ReportVery LowHighBuilding on mac os 10.13.6 fails due to perl issues wit...TrunkUnconfirmed Task Description

Attempting to build latest OpenWrt firmware for NETGEAR R7800 (arm-openwrt-linux-musl) fails with Perl errors about dynamic module loading:

/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/hostpkg/usr/bin/perl5.28.0 files/perlconfig.pl -Dowrt:target_cc='arm-openwrt-linux-muslgnueabi-gcc' -Dowrt:gccversion="7.3.0" -Dowrt:target_cross='arm-openwrt-linux-muslgnueabi-' -Dowrt:cflags='-O2 -pipe -mcpu=cortex-a9 -mfpu=vfp3 -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -I/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/usr/include -I/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/include -I/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-7.3.0_musl_eabi/usr/include -I/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-7.3.0_musl_eabi/include/fortify -I/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-7.3.0_musl_eabi/include' -Dowrt:ldflags='-L/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/usr/lib -L/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/lib -L/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-7.3.0_musl_eabi/usr/lib -L/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-7.3.0_musl_eabi/lib -znow -zrelro' -Dowrt:libc="musl" -Dowrt:ipv6=undef -Dowrt:threads=no -Dowrt:staging_dir='/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi' -Dowrt:host_perl_prefix='/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/hostpkg/usr' files/version.config files/base.config files/arm.config files/architecture.config files/signal.config files/threads.config files/libc.config files/misc.config > /Volumes/OpenWrt/NETGEAR_R7800/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/perl/perl-5.28.0/config.sh
Can't load module List::Util, dynamic loading not available in this perl.
  (You may need to build a new perl executable which either supports
  dynamic loading or has the List::Util module statically linked into it.)
 at files/perlconfig.pl line 229.
Compilation failed in require at files/perlconfig.pl line 229.
BEGIN failed--compilation aborted at files/perlconfig.pl line 229.
make[3]: *** [/Volumes/OpenWrt/NETGEAR_R7800/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/perl/perl-5.28.0/.configured_68b329da9893e34099c7d8ad5cb9c940] Error 255
make[3]: Leaving directory `/Volumes/OpenWrt/NETGEAR_R7800/feeds/packages/lang/perl'
time: package/feeds/packages/perl/compile#0.25#0.13#0.66
make[2]: *** [package/feeds/packages/perl/compile] Error 2
make[2]: Leaving directory `/Volumes/OpenWrt/NETGEAR_R7800'
make[1]: *** [/Volumes/OpenWrt/NETGEAR_R7800/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory `/Volumes/OpenWrt/NETGEAR_R7800'
make: *** [world] Error 2
15.11.20181952Base systemBug ReportVery LowHighwifi with hidden ssid and mac-filter doesn't work on IO...AllUnconfirmed Task Description

on tp-link_tl-wr842nd_v1 18.06 and 18.06.1

If hidden ssid and mac-filter is enabled, IOS 12 doesn't able to connect on this wifi network.

But if ssid broadcast is running with mac-filter enabled or ssid broadcast hidden and mac-filter disabled, then it works.

15.11.20181953Base systemBug ReportVery LowHighAsus RT N56U 5GHz radio doesn't work if 2.4GHz radio is...TrunkUnconfirmed Task Description

Version: 18.06.1
Asus RT N56U

When the 2.4GHz radio is enabled, the 5GHz radio does not function when both are set to US country code.

Steps to reproduce:
Set up radio 1 and radio 2 with US country codes.
Reboot.
Only the 2.4GHz radio will work.
If you disable the 2.4GHz and reboot, the 5GHz will work.

Any additional info you thinks is important:
Tried all workarounds listed.
More information about a bug in the original firmware fixed in Padavan’s firmware related to the 5GHz radio can be found here:
https://dev.archive.openwrt.org/ticket/17659.html#comment:23

Workaround:
Set the 2.4GHz radio country code to World (00) and reboot. Leave the 5GHz on US. Now both radios work.

24.12.20182024Base systemBug ReportVery LowHighsysupgrade silently does nothing in case of active swap...TrunkUnconfirmed Task Description

Trying sysupgrade on my ZBT WE1026, with SD-Card installed, and swap file active on it, silently does not succeed.

However, as I am using ‘sysupgrade -v -n -f /tmp/some_pars.tar.gz /tmp/fw.bin’ the files from some_pars.tar.gz are applied to unmodified system, resulting in inconsistencies.

Doing swapoff before
sysupgrade fixed my problem.

sysupgrade should at least issue an error message, when it does not succeed.
As I suspect, that unsuccessful umount of my block device with swap-file open is the culprit.


05.02.20192101Base systemBug ReportVery LowHighWDS bridge and PPPoE MTU problemAllUnconfirmed Task Description

Device: Netgear R7800
This issue is not present with original Netgear firmware and is not present with LEDE 17 (older kernel).

Preface:
I have very strange issue with interfaces MTU and it looks to be introduced with newer kernel (4.14).

My network is attached as a png:
1. my ISP uses VDSL, i just have a PPPoE (MTU=1492) on the ethernet interface through the ISP modem
2. all other internal clients and routers interfaces have MTU=1500

Ping from R7800 to 1.1.1.1 with 2000 packet size and fragmentation allowed = success
Ping from ArcherC7v2 to R7800 with 2000 packet size and fragmentation allowed = success
Ping from PC1 to R7800 with 2000 packet size and fragmentation allowed = success
Ping from PC2 to R7800 with 2000 packet size and fragmentation allowed = success
Ping from PC1 to 1.1.1.1 with 2000 packet size and fragmentation allowed = failure
Ping from PC2 to 1.1.1.1 with 2000 packet size and fragmentation allowed = success

Now the fun part:
Ping from PC1 to 1.1.1.1 with 1473 packet size and fragmentation allowed = failure
Ping from PC1 to 1.1.1.1 with 1472 packet size (1492-20) and fragmentation allowed = success

It seems a WDS (4addr) problem combined with PPPoE being at MTU=1492 at this point, but:
Ping from ArcherC7v2 to 1.1.1.1 with 2000 packet size and fragmentation allowed = success

I’ve messed up with MTU on all the interfaces, the only thing that fix the issue is setting the br-lan interface of the R7800 to MTU=1491, as soon as the bridge has MTU>1491 the pings fail.

R7800 network config

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '1 2 3 4 6t'

config switch_vlan
        option device 'switch0'
        option vlan '2'
        option ports '5 0t'

config interface 'lan'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option stp '1'
        option mtu '1500'
        option ifname 'eth1.1'

config interface 'TIM_FTTC'
        option proto 'pppoe'
        option ifname 'eth0.2'
        option username '***'
        option password '***'
        option ipv6 'auto'
        option metric '1'
        option peerdns '0'
        option keepalive '5 6'

R7800 wireless config

config wifi-device 'radio0'
        option type 'mac80211'
        option hwmode '11a'
        option path 'soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0'
        option htmode 'VHT80'
        option channel '136'
        option txpower '23'
        option country 'US'
        option legacy_rates '0'
        option noscan '1'

config wifi-iface 'default_radio0'
        option device 'radio0'
        option mode 'ap'
        option ssid '***'
        option encryption 'psk2+ccmp'
        option key '***'
        option wps_pushbutton '0'
        option network 'lan'
        option wds '1'

ArcherC7v2 network config

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '1 2 3 4 6t'

config switch_vlan
        option device 'switch0'
        option vlan '2'
        option ports '5 0t'

config interface 'lan'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.2'
        option netmask '255.255.255.0'
        option stp '1'
        option mtu '1500'
        option ifname 'eth1.1'

ArcherC7v2 wireless config

config wifi-device 'radio0'
        option type 'mac80211'
        option channel '36'
        option hwmode '11a'
        option path 'pci0000:01/0000:01:00.0'
        option htmode 'VHT80'
        option txpower '23'
        option country 'US'
        option legacy_rates '0'
        option noscan '1'

config wifi-iface 'default_radio0'
        option device 'radio0'
        option mode 'sta'
        option wds '1'
        option ssid '***'
        option encryption 'psk2+ccmp'
        option key '***'
        option wps_pushbutton '0'
        option network 'lan'

WAN zone on firewall on R7800 has

option mtu_fix '1'
23.02.20192141Base systemBug ReportVery LowHighOn router Linksys EA6350v3, Luci shows missing port on ...TrunkUnconfirmed Task Description

Hi!

I am using OpenWRT development from Feb21 on my Linksys EA6350v3 router. So far, everything works fine, however I am trying to setup the WAN port with a VLAN, but if I access: Luci → Network → Switch it only displays the CPU port and the 4 LAN ports, the WAN port is not displayed, but if I access the router via SSH, then the port is there on swconfig:

root@wl:~# swconfig dev switch0 show
Global attributes:

enable_vlan: 1
enable_mirror_rx: 0
enable_mirror_tx: 0
mirror_monitor_port: 0
mirror_source_port: 0
linkdown: ???

Port 0:

mib: Port 0 MIB counters

RxBroad : 722
RxPause : 0
RxMulti : 2898
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 34565
Rx128Byte : 717134
Rx256Byte : 12692
Rx512Byte : 7510
Rx1024Byte : 7809
Rx1518Byte : 141976
RxMaxByte : 193165
RxTooLong : 0
RxGoodByte : 573563874
RxBadByte : 0
RxOverFlow : 0
Filtered : 4
TxBroad : 3813
TxPause : 0
TxMulti : 73600
TxUnderRun : 0
Tx64Byte : 62619
Tx128Byte : 115302
Tx256Byte : 15655
Tx512Byte : 41091
Tx1024Byte : 34454
Tx1518Byte : 2869708
TxMaxByte : 0
TxOverSize : 0
TxByte : 4378564661
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0

pvid: 1
link: port:0 link:up speed:1000baseT full-duplex txflow rxflow 

Port 1:

mib: Port 1 MIB counters

RxBroad : 10
RxPause : 0
RxMulti : 126
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 40
Rx128Byte : 534
Rx256Byte : 313
Rx512Byte : 38
Rx1024Byte : 18
Rx1518Byte : 15
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 141761
RxBadByte : 0
RxOverFlow : 0
Filtered : 13
TxBroad : 180
TxPause : 0
TxMulti : 367
TxUnderRun : 0
Tx64Byte : 335
Tx128Byte : 362
Tx256Byte : 279
Tx512Byte : 216
Tx1024Byte : 29
Tx1518Byte : 52
TxMaxByte : 0
TxOverSize : 0
TxByte : 274900
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0

pvid: 1
link: port:1 link:down

Port 2:

mib: Port 2 MIB counters

RxBroad : 0
RxPause : 0
RxMulti : 0
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 0
Rx128Byte : 0
Rx256Byte : 0
Rx512Byte : 0
Rx1024Byte : 0
Rx1518Byte : 0
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 0
RxBadByte : 0
RxOverFlow : 0
Filtered : 0
TxBroad : 4419
TxPause : 0
TxMulti : 76469
TxUnderRun : 0
Tx64Byte : 46240
Tx128Byte : 1084
Tx256Byte : 2641
Tx512Byte : 28047
Tx1024Byte : 2915
Tx1518Byte : 1
TxMaxByte : 0
TxOverSize : 0
TxByte : 18438433
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0

pvid: 1
link: port:2 link:up speed:100baseT full-duplex txflow rxflow auto

Port 3:

mib: Port 3 MIB counters

RxBroad : 0
RxPause : 0
RxMulti : 0
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 0
Rx128Byte : 0
Rx256Byte : 0
Rx512Byte : 0
Rx1024Byte : 0
Rx1518Byte : 0
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 0
RxBadByte : 0
RxOverFlow : 0
Filtered : 0
TxBroad : 4419
TxPause : 0
TxMulti : 76469
TxUnderRun : 0
Tx64Byte : 46240
Tx128Byte : 1084
Tx256Byte : 2641
Tx512Byte : 28047
Tx1024Byte : 2915
Tx1518Byte : 1
TxMaxByte : 0
TxOverSize : 0
TxByte : 18438433
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0

pvid: 1
link: port:3 link:up speed:1000baseT full-duplex auto

Port 4:

mib: Port 4 MIB counters

RxBroad : 3765
RxPause : 0
RxMulti : 73151
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 62113
Rx128Byte : 115122
Rx256Byte : 15386
Rx512Byte : 40931
Rx1024Byte : 34440
Rx1518Byte : 2869706
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 4378395323
RxBadByte : 0
RxOverFlow : 0
Filtered : 11
TxBroad : 379
TxPause : 0
TxMulti : 2755
TxUnderRun : 0
Tx64Byte : 34306
Tx128Byte : 717333
Tx256Byte : 12274
Tx512Byte : 7258
Tx1024Byte : 7735
Tx1518Byte : 335099
TxMaxByte : 0
TxOverSize : 0
TxByte : 569081244
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0

pvid: 1
link: port:4 link:up speed:1000baseT full-duplex txflow rxflow auto

Port 5:

mib: Port 5 MIB counters

RxBroad : 38
RxPause : 0
RxMulti : 323
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 526
Rx128Byte : 312
Rx256Byte : 54
Rx512Byte : 205
Rx1024Byte : 23
Rx1518Byte : 30
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 217499
RxBadByte : 0
RxOverFlow : 0
Filtered : 9
TxBroad : 348
TxPause : 0
TxMulti : 259
TxUnderRun : 0
Tx64Byte : 344
Tx128Byte : 406
Tx256Byte : 200
Tx512Byte : 199
Tx1024Byte : 20
Tx1518Byte : 13
TxMaxByte : 0
TxOverSize : 0
TxByte : 194389
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0

pvid: 1
link: port:5 link:down

VLAN 1:

vid: 1
ports: 0 1 2 3 4 5 

VLAN 2:

vid: 2
ports: 0t 5t 

root@wl:~#

So the firmware knows there is an additional port in the switch, it’s just Luci that does not display it.

For extra info, here’s the OpenWRT version I am running:

BusyBox v1.30.1 () built-in shell (ash)

_______                     ________        __

| |.—–.—–.—–.| | | |.—-.| |_
| - || _ | -| || | | || _|| _|
|
_|| |_||||||| ||

        |__| W I R E L E S S   F R E E D O M

—————————————————– OpenWrt SNAPSHOT, r9414-2d13945


Thanks in advance for your help with this, very appreciated.


29.03.20192209Base systemBug ReportVery LowHighInconsistent behaviour of HOST_CONFIGURE_CMD vs CONFIGU...TrunkUnconfirmed Task Description

Target checks via:

if [ -x $(CONFIGURE_CMD) ]; then

yet host does:

if [ -x configure ]; then

So trying to use this, will fail for the target, but not for the host.

CONFIGURE_CMD = ./buildtools/bin/waf configure
HOST_CONFIGURE_CMD = ./buildtools/bin/waf configure

This results in

./buildtools/bin/waf: binary operator expected

for the target.

The check is flawed in both cases, the host does not check for the custom configure command and the target is doing a file check only, so you have to ensure the actual “configure” argument is first in the CONFIGURE_ARGS.

CONFIGURE_ARGS:=configure $(CONFIGURE_ARGS)

This is confusing and both cases should work similar and check for CONFIGURE_CMD and maybe we should add a CONFIGURE_CMD_ARGS variable, that can hold custom arguments.

03.04.20192220Base systemBug ReportVery LowHighath10k NEW kernel thread crash in CT htt firmware - ath...TrunkUnconfirmed Task Description

OpenWrt SNAPSHOT, r9754-fbe2e7d15e
Trunk Pulled April 1st.
Archer C7v2

Unclear how to reproduce, just happens.

Supplying init logs and kernel trace logs:

[ 31.099086] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x3c.
[ 31.108127] PCI: Enabling device 0000:00:00.0 (0000 → 0002)
[ 31.116173] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 31.389333] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:00:00.0.txt failed with error -2
[ 31.400044] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 31.491602] firmware ath10k!fwcfg-pci-0000:00:00.0.txt: firmware_loading_store: map pages failed
[ 31.500774] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[ 31.511656] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 31.687486] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 31.696848] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[ 31.707378] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 31.949406] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-5.bin failed with error -2
[ 31.960559] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 32.095183] firmware ath10k!QCA988X!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 32.104800] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-2.bin failed with error -2
[ 32.115944] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 32.291783] firmware ath10k!QCA988X!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 32.301402] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[ 32.312279] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 32.487841] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 32.497209] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
[ 32.508092] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 32.684408] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
[ 32.693770] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
[ 32.704646] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 32.879819] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
[ 32.889172] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
[ 32.900050] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 33.076143] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
[ 33.089091] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 33.098473] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 33.110860] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-fW-022-883e26a8 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT crc32 7a67ce60
[ 33.219987] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 33.230599] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 33.382851] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 33.392104] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 34.332647] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[ 34.350100] ath10k_pci 0000:00:00.0: wmi print ‘P 128 V 8 T 410’ [ 34.356422] ath10k_pci 0000:00:00.0: wmi print ‘msdu-desc: 1424 sw-crypt: 0 ct-sta: 0’ [ 34.364543] ath10k_pci 0000:00:00.0: wmi print ‘alloc rem: 24680 iram: 26872’ [ 34.432688] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[ 34.445504] ath10k_pci 0000:00:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0×10000000 [ 34.579131] ath: EEPROM regdomain: 0×0 [ 34.579137] ath: EEPROM indicates default country code should be used
[ 34.579140] ath: doing EEPROM country→regdmn map search
[ 34.579152] ath: country maps to regdmn code: 0x3a
[ 34.579158] ath: Country alpha2 being used: US
[ 34.579161] ath: Regpair used: 0x3a
[ 34.652355] ath: EEPROM regdomain: 0×0 [ 34.652362] ath: EEPROM indicates default country code should be used
[ 34.652365] ath: doing EEPROM country→regdmn map search
[ 34.652378] ath: country maps to regdmn code: 0x3a
[ 34.652383] ath: Country alpha2 being used: US
[ 34.652386] ath: Regpair used: 0x3a
[ 34.669837] ieee80211 phy1: Selected rate control algorithm ‘minstrel_ht’ [ 34.671315] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=12 50893 seconds later: [50893.910674] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50893.961879] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.015322] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.064267] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.115474] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.166670] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.217864] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.269072] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.320275] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.371474] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.422686] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.473885] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.525096] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.576362] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.627495] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.678696] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.732123] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.781096] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.834596] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.883493] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[50894.934705] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50894.985904] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
...repeats...
[50896.978515] ath10k_pci 0000:00:00.0: wmi command 36954 timeout, restarting hardware
[50896.986336] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50897.033922] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
...repeats...
[50900.018475] ath10k_pci 0000:00:00.0: wmi command 40859 timeout, restarting hardware
[50900.026455] ath10k_pci 0000:00:00.0: failed to send wmi nop: -11
[50900.032989] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request: -143
[50900.048476] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 87385a00 vdev: 0 addr: 50:f5:da:36:35:2c
[50900.059639] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 85914a00 vdev: 0 addr: ac:bc:32:b4:c4:d7
[50900.070766] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 86c43400 vdev: 1 addr: 32:b5:c2:96:62:fd
[50900.081883] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 86e1f000 vdev: 0 addr: 30:b5:c2:96:62:fd
[50900.093145] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[50900.355684] ieee80211 phy0: Hardware restart was requested
[50900.361749] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 1: -143
[50900.369442] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 1: -143
[50901.941908] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[50901.959432] ath10k_pci 0000:00:00.0: wmi print ‘P 128 V 8 T 410’ [50901.965928] ath10k_pci 0000:00:00.0: wmi print ‘msdu-desc: 1424 sw-crypt: 0 ct-sta: 0’ [50901.974101] ath10k_pci 0000:00:00.0: wmi print ‘alloc rem: 24680 iram: 26872’ [50902.043511] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[50902.058893] ath10k_pci 0000:00:00.0: set-coverage-class, phyclk: 88 value: 0
[50902.079716] ath10k_pci 0000:00:00.0: device successfully recovered
[50902.086147] ath10k_pci 0000:00:00.0: Invalid state: 3 in ath10k_htt_tx_32, warning will not be repeated.
[50902.086152] ————[ cut here ]———— [50902.086232] WARNING: CPU: 0 PID: 4533 at /home/vagrant/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/ath10k-ct-2019-03-25-2e917efb/ath10k-4.19/htt_tx.c:1253 ath10k_convert_hw_rate_to_rate_info+0×190/0xae4 [ath10k_core]
[50902.086235] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TRACE xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ECN ip6table_raw ip_tables crc_ccitt compat sch_cake nf_conntrack
[50902.086394] sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb tun ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[50902.086515] CPU: 0 PID: 4533 Comm: kworker/0:1 Not tainted 4.14.109 #0
[50902.086640] Workqueue: events_freezable ieee80211_alloc_hw_nm [mac80211]
[50902.086644] Stack : 00000009 000004e5 87d58468 800b2878 804aeb00 87c07cb4 85da4ddc 80501947
[50902.086665] 804aac3c 87c07c8c 80500000 800b36d4 87d58468 00000000 87c07c68 dabdb416
[50902.086684] 00000000 00000000 00000000 00000000 00000004 8040f32c 00000001 68775f6e
[50902.086702] 735f6672 80500000 000001be 65657a61 00000000 00000000 87154274 87124968
[50902.086721] 00000009 000004e5 87d58468 8723cbf0 00000000 00000000 00000000 80650000
[50902.086739] ...
[50902.086745] Call Trace:
[50902.086767] [<8006a90c>] show_stack+0×58/0×100 [50902.086791] [<80084fa0>]
warn+0xe4/0×118 [50902.086802] [<80085064>] warn_slowpath_null+0x1c/0×28 [50902.086866] [<87124968>] ath10k_convert_hw_rate_to_rate_info+0×190/0xae4 [ath10k_core]
[50902.086896] [<87103d04>] 0x87103d04
[50902.086913] —[ end trace db720eb818c982c2 ]— [50902.086925] ath10k_pci 0000:00:00.0: failed to transmit packet, dropping: -19
[50902.086938] ath10k_pci 0000:00:00.0: failed to submit frame: -19
[50902.086945] ath10k_pci 0000:00:00.0: failed to push frame: -19
[50902.086967] ath10k_pci 0000:00:00.0: failed to transmit packet, dropping: -19
[50902.086977] ath10k_pci 0000:00:00.0: failed to submit frame: -19
[50902.086984] ath10k_pci 0000:00:00.0: failed to push frame: -19
[50902.097084] ath10k_pci 0000:00:00.0: failed to transmit packet, dropping: -19
...repeats...
[55789.947757] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55789.998968] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
55792.860153] ath10k_pci 0000:00:00.0: wmi command 36893 timeout, restarting hardware
[55792.867970] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55792.875741] ath10k_pci 0000:00:00.0: failed to delete peer b0:19:c6:64:f9:69 for vdev 0: -11
[55792.884453] ath10k_pci 0000:00:00.0: found sta peer b0:19:c6:64:f9:69 (ptr 86e1f600 id 33) entry on vdev 0 after it was supposedly removed
[55792.897563] ————[ cut here ]———— [55792.902662] WARNING: CPU: 0 PID: 2420 at backports-4.19.23-1/net/mac80211/sta_info.c:1004 sta_set_sinfo+0xbac/0xc58 [mac80211]
[55792.914415] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TRACE xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ECN ip6table_raw ip_tables crc_ccitt compat sch_cake nf_conntrack
[55792.986359] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55792.986485] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55793.003634] sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb tun ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[55793.062374] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55793.070938] CPU: 0 PID: 2420 Comm: hostapd Tainted: G W 4.14.109 #0
[55793.078506] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55793.086883] Stack : 80520000 804d84a4 00000000 00000000 804aeb00 85da1b04 87dd02dc 80501947
[55793.095767] 804aacd0 00000974 80653670 000003ec 85da1cb4 00000001 85da1ab8 b78f71e9
[55793.104653] 00000000 00000000 80650000 00012a38 00000000 00000000 00000008 00000000
[55793.114085] 000002ce 861a1102 000002cc 00000000 80000000 00000000 87064a04 87007c2c
[55793.123006] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55793.131158] 00000009 000003ec 85da1cb4 87ff8800 00000002 802697c4 00000000 80650000
[55793.139658] ...
[55793.142953] Call Trace:
[55793.145468] [<8006a90c>] show_stack+0×58/0×100 [55793.149997] [<80084fa0>] warn+0xe4/0×118 [55793.154512] [<80085064>] warn_slowpath_null+0x1c/0×28 [55793.160292] [<87007c2c>] sta_set_sinfo+0xbac/0xc58 [mac80211]
[55793.166181] [<87007db8>] sta_info_destroy_addr_bss+0×38/0×60 [mac80211]
[55793.173452] [<8778f17c>] cfg80211_check_station_change+0x1be0/0x2c54 [cfg80211]
[55793.180959] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55793.188700] —[ end trace db720eb818c982c3 ]— [55793.224635] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55793.275831] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
...
[55796.220118] ath10k_pci 0000:00:00.0: wmi command 36954 timeout, restarting hardware
[55796.245481] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55796.296663] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55796.317807] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 8561b600 vdev: 0 addr: 50:f5:da:36:35:2c
[55796.328987] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 85322c00 vdev: 0 addr: ac:bc:32:b4:c4:d7
[55796.340121] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 834fb200 vdev: 1 addr: 32:b5:c2:96:62:fd
[55796.351253] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 834fb000 vdev: 0 addr: 30:b5:c2:96:62:fd
[55796.860635] irq 15: nobody cared (try booting with the “irqpoll” option)
[55796.867447] CPU: 0 PID: 15620 Comm: kworker/u2:0 Tainted: G W 4.14.109 #0
[55796.875540] Workqueue: ath10k_wq ath10k_core_create [ath10k_core]
[55796.881718] Stack : ffffffff 00000003 80653ae0 800b2878 804aeb00 87c07cc4 86e123dc 80501947
[55796.890201] 804aac3c 87c07c9c 80500000 800b36d4 80653ae0 00000000 87c07c78 86c8eb6e
[55796.898683] 00000000 00000000 00000000 000151c0 00000000 00000000 00000008 00000000
[55796.907167] 00000323 80500000 00000322 00000000 00000000 8050b6a4 0000000f 00011000
[55796.915650] ffffffff 00000003 80653ae0 80506ae8 00000000 802697c4 00000000 80650000
[55796.924134] ...
[55796.926615] Call Trace:
[55796.929112] [<8006a90c>] show_stack+0×58/0×100 [55796.933620] [<800b6f6c>]
report_bad_irq.isra.0+0×54/0xf0
[55796.939179] [<800b72f4>] note_interrupt+0×284/0×330 [55796.944142] [<800b488c>] handle_irq_event_percpu+0x4c/0×64 [55796.949706] [<800b48e0>] handle_irq_event+0x3c/0x6c
[55796.954650] [<800b7ca4>] handle_level_irq+0×110/0×154 [55796.959772] [<800b3d90>] generic_handle_irq+0×38/0×50 [55796.964903] [<802d4750>] ar724x_pci_irq_handler+0xa4/0xdc
[55796.970376] [<800b3d90>] generic_handle_irq+0×38/0×50 [55796.975502] [<80219354>] ath79_intc_irq_handler+0×94/0xec
[55796.980981] [<800b3d90>] generic_handle_irq+0×38/0×50 [55796.986117] [<804144d4>] do_IRQ+0x1c/0x2c
[55796.990185] [<80219260>] plat_irq_dispatch+0xc0/0×120 [55796.995306] [<800658d8>] handle_int+0×138/0×144 [55796.999900] [<80219260>] plat_irq_dispatch+0xc0/0×120 [55797.005018] handlers:
[55797.007333] [<877134a0>] ath10k_pci_irq_msi_fw_mask [ath10k_pci]
[55797.013420] Disabling IRQ #15
[55797.285000] ieee80211 phy0: Hardware restart was requested
[55800.300248] ath10k_pci 0000:00:00.0: bss channel survey timed out
[55801.740207] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[55801.850097] ath10k_pci 0000:00:00.0: wmi print ‘P 128 V 8 T 410’ [55801.856213] ath10k_pci 0000:00:00.0: wmi print ‘msdu-desc: 1424 sw-crypt: 0 ct-sta: 0’ [55801.864353] ath10k_pci 0000:00:00.0: wmi print ‘alloc rem: 24680 iram: 26872’ [55802.950176] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[55808.120391] ath10k_pci 0000:00:00.0: device successfully recovered
[55808.126726] net_ratelimit: 79 callbacks suppressed
[55808.126736] ath10k_pci 0000:00:00.0: failed to transmit packet, dropping: -19
[55808.126748] ath10k_pci 0000:00:00.0: failed to submit frame: -19
[55808.126756] ath10k_pci 0000:00:00.0: failed to push frame: -19
[55808.126771] ath10k_pci 0000:00:00.0: failed to transmit packet, dropping: -19
[55808.126780] ath10k_pci 0000:00:00.0: failed to submit frame: -19
[55808.126787] ath10k_pci 0000:00:00.0: failed to push frame: -19
[55808.560031] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55808.567607] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55808.575152] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55808.670084] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55808.677616] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55808.790161] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55808.797700] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55808.890070] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55808.897614] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.000079] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.007588] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.110035] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.117559] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.125363] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.220094] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.227789] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.330097] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.337638] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.440112] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.447645] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.550389] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon
[55809.557931] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[55809.660388] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon


06.04.20192226Base systemBug ReportVery LowHighzyxel P-2812HNU-F1 initramfs has been broken with LZMA:...AllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

zyxel P-2812HNU-F1

- Software versions of OpenWrt/LEDE release, packages, etc.

since r47026 up to the latest trunk

- Steps to reproduce
boot with serial connection stop autoboot, load initramfs, boot from ram get error

- Reason it is important

initramfs is needed for a first install.

- Posible solution
include/configs/p2812hnufx.h
probably needs:
#define CONFIG_SYS_BOOTM_LEN 0×1000000 /* 16 MB */

like in this commit for a similar modem
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=ea12a80276c0aca680d67515e7f651e2cef3f3ee

- error logs
“recent” trunk snapshot(I threw away the last compiled version for it still gave the same error)

ROM VER: 1.0.5
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt5 (Nov 18 2014 - 19:54:01)
SPL: initializing NAND flash
SPL: checking U-Boot image
SPL: loading U-Boot to RAM
SPL: decompressing U-Boot with LZO
SPL: jumping to U-Boot


U-Boot 2013.10-openwrt5 (Nov 18 2014 - 19:54:01) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NAND
DRAM:  128 MiB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0
P-2812HNU-Fx # tftpboot openwrt-lantiq-xrx200-zyxel_p-2812hnu-f1-initramfs-kernel.bin
ltq_phy: addr 0, link 1, speed 1000, duplex 1
ltq_phy: addr 1, link 0, speed 10, duplex 0
ltq_phy: addr 17, link 0, speed 10, duplex 0
ltq_phy: addr 19, link 0, speed 10, duplex 0
ltq_phy: addr 5, link 0, speed 10, duplex 0
Using ltq-eth device
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'openwrt-lantiq-xrx200-zyxel_p-2812hnu-f1-initramfs-kernel.bin'.
Load address: 0x81000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ######################################
done
Bytes transferred = 6183929 (5e5bf9 hex)
P-2812HNU-Fx # bootm $fileaddr
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   MIPS OpenWrt Linux-4.14.103
   Created:      2019-02-27  11:12:48 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    6183865 Bytes = 5.9 MiB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... LZMA: uncompress or overwrite error 7 - must RESET b
ROM VER: 1.0.5
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt5 (Nov 18 2014 - 19:54:01)

last known working version

ROM VER: 1.0.5
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt5 (Nov 18 2014 - 19:54:01)
SPL: initializing NAND flash
SPL: checking U-Boot image
SPL: loading U-Boot to RAM
SPL: decompressing U-Boot with LZO
SPL: jumping to U-Boot


U-Boot 2013.10-openwrt5 (Nov 18 2014 - 19:54:01) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NAND
DRAM:  128 MiB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0
P-2812HNU-Fx # tftpboot openwrt-lantiq-xrx200-P2812HNUF1-uImage-initramfs
ltq_phy: addr 0, link 0, speed 10, duplex 0
ltq_phy: addr 1, link 0, speed 10, duplex 0
ltq_phy: addr 17, link 0, speed 10, duplex 0
ltq_phy: addr 19, link 0, speed 10, duplex 0
ltq_phy: addr 5, link 0, speed 10, duplex 0
Using ltq-eth device
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'openwrt-lantiq-xrx200-P2812HNUF1-uImage-initramfs'.
Load address: 0x81000000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
ltq_phy: addr 0, link 1, speed 1000, duplex 1
ltq_phy: addr 1, link 0, speed 10, duplex 0
ltq_phy: addr 17, link 0, speed 10, duplex 0
ltq_phy: addr 19, link 0, speed 10, duplex 0
ltq_phy: addr 5, link 0, speed 10, duplex 0
Using ltq-eth device
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'openwrt-lantiq-xrx200-P2812HNUF1-uImage-initramfs'.
Load address: 0x81000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ##########
         1.6 MiB/s
done
Bytes transferred = 4707233 (47d3a1 hex)
P-2812HNU-Fx # bootm $fileaddr
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   MIPS OpenWrt Linux-3.18.11
   Created:      2015-04-25   1:54:58 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    4707169 Bytes = 4.5 MiB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.18.11 (sylwek@WRT) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r44945) ) #2 Sat Apr 25 03:54:35 CEST 2015
[    0.000000] SoC: VR9 rev 1.1
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019555 (MIPS 34Kc)
[    0.000000] MIPS: machine is P2812HNUF1 - ZyXEL P-2812HNU-F1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00021000
[    0.000000] Readback ErrCtl register=00021000
[    0.000000] Memory: 121772K/131072K available (3506K kernel code, 149K rwdata, 1036K rodata, 3160K init, 206K bss, 9300K reserved)
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 500MHz
[    0.000000] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[    0.032000] pid_max: default: 32768 minimum: 301
[    0.036000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.044000] pinctrl core: initialized pinctrl subsystem
[    0.048000] NET: Registered protocol family 16
[    0.056000] pinctrl-xway 1e100b10.pinmux: Init done
[    0.060000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[    0.164000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[    0.168000] PCI host bridge /fpi@10000000/pci@E105400 ranges:
[    0.172000]  MEM 0x0000000018000000..0x0000000019ffffff
[    0.176000]   IO 0x000000001ae00000..0x000000001affffff
[    0.188000] gpio-stp-xway 1e100bb0.stp: Init done
[    0.192000] usbcore: registered new interface driver usbfs
[    0.196000] usbcore: registered new interface driver hub
[    0.200000] usbcore: registered new device driver usb
[    0.204000] PCI host bridge to bus 0000:00
[    0.208000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
[    0.212000] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    0.216000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.220000] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[    0.224000] Switched to clocksource MIPS
[    0.228000] NET: Registered protocol family 2
[    0.232000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.240000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.248000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.252000] TCP: reno registered
[    0.256000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.260000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.268000] NET: Registered protocol family 1
[    5.124000] gptu: totally 6 16-bit timers/counters
[    5.132000] gptu: misc_register on minor 63
[    5.136000] gptu: succeeded to request irq 126
[    5.140000] gptu: succeeded to request irq 127
[    5.144000] gptu: succeeded to request irq 128
[    5.148000] gptu: succeeded to request irq 129
[    5.152000] gptu: succeeded to request irq 130
[    5.156000] gptu: succeeded to request irq 131
[    5.164000] ralink,eeprom ralink_eep: using RT3062.eeprom as eeprom
[    5.168000] phy-xrx200 gphy-xrx200: requesting lantiq/vr9_phy11g_a1x.bin
[    5.176000] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 6A60000
[    5.184000] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 6A60000
[    5.288000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    5.296000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.304000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.312000] msgmni has been set to 237
[    5.316000] io scheduler noop registered
[    5.320000] io scheduler deadline registered (default)
[    5.328000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[    5.336000] console [ttyLTQ0] enabled
[    5.336000] console [ttyLTQ0] enabled
[    5.344000] bootconsole [early0] disabled
[    5.344000] bootconsole [early0] disabled
[    5.352000] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[    5.352000] nand: Samsung NAND 128MiB 3,3V 8-bit
[    5.352000] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[    5.368000] Scanning device for bad blocks
[    5.424000] Bad eraseblock 591 at 0x0000049e0000
[    5.428000] Bad eraseblock 616 at 0x000004d00000
[    5.464000] 4 ofpart partitions found on MTD device 10000000.nand-parts
[    5.468000] Creating 4 MTD partitions on "10000000.nand-parts":
[    5.476000] 0x000000000000-0x000000040000 : "uboot"
[    5.480000] 0x000000040000-0x000000060000 : "uboot-env"
[    5.488000] 0x000000060000-0x000000260000 : "kernel"
[    5.492000] 0x000000260000-0x000008000000 : "ubi"
[    5.600000] libphy: lantiq,xrx200-mdio: probed
[    5.620000] net-xrx200: invalid MAC, using random
[    5.688000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:00, irq=-1)
[    5.756000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:01, irq=-1)
[    5.824000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
[    5.892000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
[    5.960000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:05, irq=-1)
[    5.968000] wdt 1f8803f0.watchdog: Init done
[    5.972000] TCP: cubic registered
[    5.976000] NET: Registered protocol family 17
[    5.980000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    5.992000] Bridge firewalling registered
[    5.996000] 8021q: 802.1Q VLAN Support v1.8
[    6.004000] UBI error: ubi_auto_attach: no valid UBI magic found [    6.016000] Freeing unused kernel memory: 3160K (8049a000 - 807b0000)
[    6.036000] init: failed to symlink /tmp -> /var
[    6.040000] init: Console is alive
[    6.048000] init: - watchdog -
[    6.076000] dwc2 1e101000.ifxhcd: requested GPIO 489
[    6.936000] dwc2 1e101000.ifxhcd: DWC OTG Controller
[    6.936000] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
[    6.944000] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[    6.952000] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
[    6.952000] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
[    6.964000] hub 1-0:1.0: USB hub found
[    6.968000] hub 1-0:1.0: 1 port detected
[    7.832000] dwc2 1e106000.ifxhcd: DWC OTG Controller
[    7.832000] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
[    7.840000] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
[    7.848000] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
[    7.848000] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
[    7.860000] hub 2-0:1.0: USB hub found
[    7.864000] hub 2-0:1.0: 1 port detected
[    8.048000] init: - preinit -
[    8.160000] random: procd urandom read with 31 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    9.688000] eth0: port 0 got link
[   11.280000] procd: - early -
[   11.280000] procd: - watchdog -
[   11.852000] procd: - ubus -
[   12.864000] procd: - init -
Please press Enter to activate this console.
[   13.884000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH

[   13.908000] NET: Registered protocol family 10
[   13.916000] NET: Registered protocol family 8
[   13.920000] NET: Registered protocol family 20
[   13.932000] PPP generic driver version 2.4.2
[   13.940000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   13.964000] MEI CPE Driver, Version 1.2.0

[   13.964000] (c) Copyright 2009, Infineon Technologies AG
### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###


Lantiq CPE API Driver version: DSL CPE API V4.11.4
[   13.988000]
[   13.988000] Predefined debug level: 2
[   14.000000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
[   14.004000] Backport generated by backports.git backports-20150129-0-gdd4a670
[   14.016000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.028000] Infineon Technologies DEU driver version 2.0.0
[   14.032000] IFX DEU DES initialized (multiblock).
[   14.036000] IFX DEU AES initialized (multiblock).
[   14.040000] IFX DEU ARC4 initialized (multiblock).
[   14.044000] IFX DEU SHA1 initialized.
[   14.048000] IFX DEU MD5 initialized.
[   14.052000] IFX DEU SHA1_HMAC initialized.
[   14.056000] IFX DEU MD5_HMAC initialized.
[   14.068000] nf_conntrack version 0.5.0 (1952 buckets, 7808 max)
[   14.092000] NET: Registered protocol family 24
[   14.116000] xt_time: kernel timezone is -0000
[   14.140000] cfg80211: Calling CRDA to update world regulatory domain
[   14.164000] cfg80211: World regulatory domain updated:
[   14.168000] cfg80211:  DFS Master region: unset
[   14.172000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   14.180000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   14.188000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   14.196000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   14.204000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   14.212000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   14.220000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   14.232000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   14.240000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   14.328000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[   14.332000] rt2800pci 0000:00:0e.0: failed to load eeprom property
[   14.336000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
[   14.348000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected
[   14.356000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected
ioctl ATM_SETESI: No such device
[   20.824000] PTM 1.0.27    PTM (E1) firmware version 0.30
[   20.828000] ifxmips_ptm: PTM init succeed
[   22.760000] device eth0.1 entered promiscuous mode
[   22.764000] device eth0 entered promiscuous mode
[   22.776000] br-lan: port 1(eth0.1) entered forwarding state
[   22.780000] br-lan: port 1(eth0.1) entered forwarding state
[   24.784000] br-lan: port 1(eth0.1) entered forwarding state
[   31.808000] random: nonblocking pool is initialized



BusyBox v1.23.2 (2015-04-25 03:40:56 CEST) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 CHAOS CALMER (Bleeding Edge, r45578)
 -----------------------------------------------------
  * 1 1/2 oz Gin            Shake with a glassful
  * 1/4 oz Triple Sec       of broken ice and pour
  * 3/4 oz Lime Juice       unstrained into a goblet.
  * 1 1/2 oz Orange Juice
  * 1 tsp. Grenadine Syrup
 -----------------------------------------------------
root@OpenWrt:/#
17.04.20192240Base systemBug ReportVery LowHighLantiq: AVM FRITZ!Box 7320 only one ETH port is workingAllUnconfirmed Task Description

Router has 2 ethernet ports, but the only first one is working.

16.07.20192390Base systemBug ReportVery LowHighIssues with PowerLAN devicesTrunkUnconfirmed Task Description

Since switching my WNDR3700v1 from Netgear’s firmware to OpenWrt 18.06.2 r7676-cddd7b4c77, I am experiencing the following issues:

1) PowerLAN adapters and network devices connected through it are only seen by the router if the first PowerLAN adapter is connected through a crossover cable. With the manufacturer’s firmware, it was possible to connect the adapter by standard ethernet cable.

2) A printer connected through PowerLAN does not get assigned an IP4 network address, even though I have defined a static address for it in the DHCP section of OpenWrt; (it does get an IPv6 address though). The missing IP4 network address prevents the scanner part of the printer from sending scans to a network folder on my NAS connected through ethernet cable to the router. This issue also did not exist with the original Netgear firmware.

 


24.08.20192462Base systemBug ReportVery LowHighwrt32x WIFI was breaking on 2 sec I did not get full co...AllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on wrt32x
- Software versions of OpenWrt 19.07

I tested these images on wrt32x and wrt3600, but unfortunately I gave up there was a problem on wrt32x WIFI was breaking the computer and in the relayd wrt3600 → wrt32x the maximum speed on the bridge is 10Mb. I do not observe this for version 18.06 (images downloaded from eko.one.pl). And after disconnection I did not get full connection speed of 866.7 Mb / s to the router. Although I will say that options 19.07 in Lucia look encouraging.

15.09.20192496Base systemBug ReportVery LowHighWPA3-SAE can't be enabled on mt76 deviceTrunkUnconfirmed Task Description

Device: Netgear EX2700

Version: OpenWrt 19.07-SNAPSHOT r10532-cf3b50377e / LuCI openwrt-19.07 branch (git-19.256.45060-8a2f1c7)

Steps to reproduce: Enable WPA3 or WPA3-Mixed Mode via LuCI.

Result:
Wifi won’t come up. Works fine with WPA2.

Sun Sep 15 20:08:18 2019 kern.info kernel: [ 1638.740004] device wlan0 left promiscuous mode
Sun Sep 15 20:08:18 2019 kern.info kernel: [ 1638.740123] br-lan: port 2(wlan0) entered disabled state
Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED
Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING
Sun Sep 15 20:08:18 2019 daemon.notice netifd: Network device 'wlan0-1' link is down
Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.020561] br-guest: port 2(wlan0-1) entered disabled state
Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.023338] device wlan0-1 left promiscuous mode
Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.023357] br-guest: port 2(wlan0-1) entered disabled state
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0-1 from bridge br-guest: No such device
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0 from bridge br-lan: Invalid argument
Sun Sep 15 20:08:19 2019 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Sun Sep 15 20:08:19 2019 daemon.notice netifd: radio0 (1867): command failed: Not supported (-122)
Sun Sep 15 20:08:19 2019 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Sun Sep 15 20:08:19 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sun Sep 15 20:08:21 2019 kern.info kernel: [ 1639.912716] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start
Sun Sep 15 20:08:21 2019 kern.info kernel: [ 1639.913245] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.824164] ieee80211 phy0: rt2800_loft_iq_calibration: Info - LOFT Calibration Done!
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.828164] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start!
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.842569] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 0, phase=3f)
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.843488] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start!
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.857895] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= 0, phase= 2)
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.857931] ieee80211 phy0: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done!
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.871433] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=1, Ph_rx=-6
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.881694] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=0, Ph_rx=2
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.888849] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894441] br-lan: port 2(wlan0) entered blocking state
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894456] br-lan: port 2(wlan0) entered disabled state
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894799] device wlan0 entered promiscuous mode
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Sun Sep 15 20:08:22 2019 daemon.err hostapd: Using interface wlan0 with hwaddr XX:XX:XX:XX:XX:XX and ssid "HOME"
Sun Sep 15 20:08:22 2019 daemon.err hostapd: Interface initialization failed
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994731] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994904] br-lan: port 2(wlan0) entered blocking state
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994914] br-lan: port 2(wlan0) entered forwarding state
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Sun Sep 15 20:08:22 2019 daemon.err hostapd: wlan0: Unable to setup interface.
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING
Sun Sep 15 20:08:22 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0-1 wasn't started
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sun Sep 15 20:08:22 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1642.002616] device wlan0 left promiscuous mode
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1642.002723] br-lan: port 2(wlan0) entered disabled state
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x77d76c60 user_data=0 handler=0x46a4f5
Sun Sep 15 20:08:22 2019 daemon.notice netifd: radio0 (1867): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 1120 path ()
Sun Sep 15 20:08:22 2019 daemon.notice netifd: radio0 (1867): Device setup failed: HOSTAPD_START_FAILED


11.11.20192591Base systemBug ReportVery LowHighInternet drop out on LAN wget YouTube on Fritz!Box 4040TrunkUnconfirmed Task Description

Recently I’ve upgraded from a Buffalo WZR-HP-AG300H to a Fritz!Box 4040. My download speed doubled on my 400Mbit cable connection but since then I do experience as well a lot of instabilities where my previous setup was 100% stable. The OpenWrt router runs behind a DS-lite cable router (Fritz!Box 6591).

Just by watching a YouTube video (e.g. music) or by downloading with wget some files (e.g. Linux Iso images) via the LAN interface, OpenWrt on the Fritz!Box 4040 will randomly drop the internet connection completely. It disconnects the router, no ping with IPv4 or IPv6 is possible then anymore from my machine. Strangely I can access the web interface only via Wifi to reboot the router. The lost connection doesn’t come back after some time, the router requires a reboot.

If I avoid YouTube/wget, the OpenWrt router runs quite well when just doing normal internet browsing and running a web server behind the OpenWrt router.

In the log files I do not see any special hint what might cause the drop outs. I’ve tested multiple different setups already, ordered a second Fritz!Box 4040 to exclude a hardware issue, tested with 2 different cable routers, did a factory reset, flashed the latest OpenWrt snapshot (plus added luci) and used the standard configs, nothing seems to help. I assume that it is related somehow to IPv6. There are other users with the Fritz!Box 4040 that do not experience these issues, but they use it only with IPv4. As I have DS-lite, I need to use IPv6 to avoid the 6to4 tunneling on the cable router.

- Fritz!Box 4040
- OpenWrt 18.06.4 + Dev Snapshot 2019-11-10
- IPv4 and IPv6 incl. Prefix delegation to LAN interface
- Watch YouTube videos or download files with wget

For reference, I did a post on the forum: https://forum.openwrt.org/t/fritz-box-4040-drops-out-internet-connection-if-watching-youtube-from-lan/46753

12.11.20192593Base systemBug ReportVery LowHighno AC wifi with ath10k on 19.07-rc1openwrt-19.07Waiting on reporter Task Description

- Archer C7, Netgear R7800
- 19.07-RC1 default
- install image, configure wifi, try to connect, in my case i’m getting 300Mbps rate, others report as low as up to 54 (legacy only)

 

R7800 report: https://forum.openwrt.org/t/openwrt-19-07-0-first-release-candidate/48040/33

Archer C7 v2 report: https://forum.openwrt.org/t/openwrt-19-07-rc1-archer-c7-v2-5g-wifi-died-after-trying-to-change-channels/48182/7

the situation is the same with intree 4.9.200 driver or any of the latest backports installed on client PC

30.11.20192643Base systemBug ReportVery LowHighEspressoBin: Internal error: synchronous parity or ECC ...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)

- Software versions of OpenWrt/LEDE release, packages, etc.

11595-g5d2a900163

- Steps to reproduce

Boot and wait about an hour. Here are a series of kernel panics:

[ 4228.773060] Internal error: synchronous parity or ECC error: 86000018 [#1] SMP
[ 4228.777653] Modules linked in: ath9k ath9k_common xt_connlimit nf_conncount iptable_nat ipt_MASQUERADE ath9k_hw ath xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_NETMAP xt_FLOWOFFLOAD xt_CT 
nf_nat_ipv4 nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_recent xt_quota xt_pkttype xt_owner xt_multiport xt_mark xt
_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_condition xt_comment xt_bpf xt_addrtype xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY ts_kmp ts_fsm ts_bm nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_raw iptabl
e_mangle iptable_filter ipt_ECN ip_tables compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables
[ 4228.850958]  nf_reject_ipv6 tun gpio_button_hotplug
[ 4228.855992] Process kworker/1:2 (pid: 594, stack limit = 0x00000000a141aece)
[ 4228.863262] CPU: 1 PID: 594 Comm: kworker/1:2 Not tainted 4.19.85 #0
[ 4228.869776] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
[ 4228.876450] Workqueue:            (null) (events)
[ 4228.881258] pstate: 80400085 (Nzcv daIf +PAN -UAO)
[ 4228.886204] pc : kthread_data+0x8/0x40
[ 4228.890035] lr : wq_worker_sleeping+0xc/0xb0
[ 4228.894410] sp : ffffff8009463d60
[ 4228.897819] x29: ffffff8009463d60 x28: 0000000000000000 
[ 4228.903281] x27: 0000000000000000 x26: ffffff80080b5318 
[ 4228.908746] x25: 0000000000000000 x24: ffffffc03e479a18 
[ 4228.914213] x23: ffffff8008868738 x22: ffffff800884e018 
[ 4228.919678] x21: ffffff8008853500 x20: ffffffc03e479500 
[ 4228.925146] x19: ffffffc03ffdd500 x18: 0000000000000000 
[ 4228.930609] x17: 0000000000000000 x16: 0000000000000000 
[ 4228.936076] x15: 0000000000000000 x14: 0000000000000000 
[ 4228.941541] x13: 0000000000000002 x12: 0000000000000001 
[ 4228.947006] x11: ffffffc03ffd94d0 x10: 00000000000007c0 
[ 4228.952472] x9 : ffffffc03e13d668 x8 : ffffff80088a9b08 
[ 4228.957937] x7 : 0000000000000000 x6 : 00000000050ebc0a 
[ 4228.963404] x5 : 0000000000000004 x4 : 0000000000000002 
[ 4228.968869] x3 : 00000000fffffff9 x2 : 0000000800000000 
[ 4228.974335] x1 : 0000000000000001 x0 : ffffffc03e479500 
[ 4228.979797] Call trace:
[ 4228.982331]  kthread_data+0x8/0x40
[ 4228.985813]  wq_worker_sleeping+0xc/0xb0
[ 4228.989859]  __schedule+0x140/0x570
[ 4228.993436]  schedule+0x58/0x80
[ 4228.996656]  worker_thread+0x370/0x468
[ 4229.000513]  kthread+0x110/0x120
[ 4229.003829]  ret_from_fork+0x10/0x1c
[ 4229.007521] Code: d65f03c0 d503201f a9be7bfd 910003fd (f9000bf3) 
[ 4229.013769] ---[ end trace 4f1be3f746ce5030 ]---
[ 4229.024169] Kernel panic - not syncing: Fatal exception
[ 4229.026728] SMP: stopping secondary CPUs
[ 4229.030757] Kernel Offset: disabled
[ 4229.034342] CPU features: 0x0,00002008
[ 4229.038186] Memory Limit: none
[ 4229.044024] Rebooting in 3 seconds..
[ 3676.038431] Internal error: synchronous parity or ECC error: 86000018 [#1] SMP
[ 3676.043028] Modules linked in: ath9k ath9k_common xt_connlimit nf_conncount iptable_nat ipt_MASQUERADE ath9k_hw ath xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_NETMAP xt_FLOWOFFLOAD xt_CT 
nf_nat_ipv4 nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_recent xt_quota xt_pkttype xt_owner xt_multiport xt_mark xt
_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_condition xt_comment xt_bpf xt_addrtype xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY ts_kmp ts_fsm ts_bm nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_raw iptabl
e_mangle iptable_filter ipt_ECN ip_tables compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables
[ 3676.116317]  nf_reject_ipv6 tun gpio_button_hotplug
[ 3676.121338] Process kworker/0:1 (pid: 41, stack limit = 0x000000008b9ea8ea)
[ 3676.128509] CPU: 0 PID: 41 Comm: kworker/0:1 Not tainted 4.19.85 #0
[ 3676.134953] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
[ 3676.141596] Workqueue:            (null) (events)
[ 3676.146426] pstate: 60400085 (nZCv daIf +PAN -UAO)
[ 3676.151361] pc : update_cfs_group+0x0/0xb0
[ 3676.155565] lr : dequeue_task_fair+0x440/0x960
[ 3676.160130] sp : ffffff8008a23cf0
[ 3676.163535] x29: ffffff8008a23cf0 x28: ffffffc03ffcd500 
[ 3676.169001] x27: ffffffc0043a5e80 x26: ffffff80088523f0 
[ 3676.174466] x25: afb504000afb5041 x24: ffffff80088c85c0 
[ 3676.179932] x23: 00000357e4f6aec0 x22: ffffff800884e018 
[ 3676.185397] x21: 0000000000000009 x20: ffffffc0043a5f40 
[ 3676.190863] x19: ffffffc03ffcd580 x18: 0000000000000000 
[ 3676.196329] x17: 0000000000000000 x16: 0000000000000000 
[ 3676.201793] x15: 0000000000000000 x14: 0000000000000000 
[ 3676.207259] x13: 0000000000000000 x12: 0000000000000000 
[ 3676.212726] x11: 0000000000000000 x10: 00000000000007c0 
[ 3676.218191] x9 : ffffffc0042eea68 x8 : ffffff80088a9b08 
[ 3676.223657] x7 : 0000000000000001 x6 : 00000000050e6eea 
[ 3676.229122] x5 : 00000000000000e8 x4 : ffffffc0043a3ff0 
[ 3676.234587] x3 : ffffffc03ffcdef8 x2 : ffffffc0043a5f70 
[ 3676.240053] x1 : 0000000000000001 x0 : ffffffc0043a5f40 
[ 3676.245519] Call trace:
[ 3676.248032]  update_cfs_group+0x0/0xb0
[ 3676.251887]  deactivate_task+0x6c/0x80
[ 3676.255740]  __schedule+0x10c/0x570
[ 3676.259321]  schedule+0x58/0x80
[ 3676.262546]  worker_thread+0x370/0x468
[ 3676.266400]  kthread+0x110/0x120
[ 3676.269715]  ret_from_fork+0x10/0x1c
[ 3676.273393] Code: a9425bf5 a8c37bfd d65f03c0 d503201f (f9404407) 
[ 3676.279660] ---[ end trace fa914749a4dc6031 ]---
[ 3676.285581] Kernel panic - not syncing: Fatal exception
[ 3676.289785] SMP: stopping secondary CPUs
[ 3676.293816] Kernel Offset: disabled
[ 3676.297399] CPU features: 0x0,00002008
[ 3676.301249] Memory Limit: none
[ 3676.304922] Rebooting in 3 seconds..
[12929.680240] Internal error: synchronous parity or ECC error: 86000018 [#1] SMP
[12929.684836] Modules linked in: ath9k ath9k_common xt_connlimit nf_conncount iptable_nat ipt_MASQUERADE ath9k_hw ath xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_NETMAP xt_FLOWOFFLOAD xt_CT nf_nat_ipv4 nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_recent xt_quota xt_pkttype xt_owner xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_condition xt_comment xt_bpf xt_addrtype xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY ts_kmp ts_fsm ts_bm nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables
[12929.758123]  nf_reject_ipv6 tun gpio_button_hotplug
[12929.763145] Process kworker/0:0 (pid: 5, stack limit = 0x00000000f766a017)
[12929.770227] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 4.19.85 #0
[12929.776582] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
[12929.783224] Workqueue:            (null) (events)
[12929.788054] pstate: 80400085 (Nzcv daIf +PAN -UAO)
[12929.792990] pc : __schedule+0x348/0x570
[12929.796923] lr : __schedule+0x2d0/0x570
[12929.800862] sp : ffffff800804bd90
[12929.804268] x29: ffffff800804bd90 x28: 0000000000000000 
[12929.809733] x27: ffffffc03ffccef0 x26: ffffffc03ffccea0 
[12929.815199] x25: 0000000000000000 x24: ffffffc00427af10 
[12929.820664] x23: ffffff8008666460 x22: ffffff800884e018 
[12929.826129] x21: ffffffc00427de80 x20: ffffffc00427aa00 
[12929.831595] x19: ffffffc03ffcd500 x18: 0000000000000000 
[12929.837061] x17: 0000000000000000 x16: 0000000000000000 
[12929.842526] x15: 0000000000000000 x14: 0000000000000000 
[12929.847992] x13: 0000000000000002 x12: 0000000000000000 
[12929.853458] x11: ffffffc03ffc94d0 x10: 00000000000007c0 
[12929.858924] x9 : ffffffc004230168 x8 : ffffff80088a9b08 
[12929.864388] x7 : 0000000000000000 x6 : 000000199ea477c6 
[12929.869855] x5 : 000000000000030f x4 : 00000bc26cff1000 
[12929.875320] x3 : ffffffc03ffcdef8 x2 : ffffffc03ffcdef8 
[12929.880785] x1 : ffffffc03ffcdef8 x0 : 0000000000000008 
[12929.886251] Call trace:
[12929.888764]  __schedule+0x348/0x570
[12929.892348]  schedule+0x58/0x80
[12929.895575]  worker_thread+0x370/0x468
[12929.899428]  kthread+0x110/0x120
[12929.902742]  ret_from_fork+0x10/0x1c
[12929.906418] Code: b5fffeb7 d4210000 f9800291 c85f7e80 (927ef800) 
[12929.912686] ---[ end trace 5f4e2dd5c1da7acd ]---
[12929.918593] Kernel panic - not syncing: Fatal exception
[12929.922812] SMP: stopping secondary CPUs
[12929.926844] Kernel Offset: disabled
[12929.930426] CPU features: 0x0,00002008
[12929.934277] Memory Limit: none
[12929.937946] Rebooting in 3 seconds..
01.12.20192647Base systemBug ReportVery LowHighEA6350v3 (IPQ4018) memory usage climbs until processes ...openwrt-19.07Unconfirmed Task Description

Device is Linksys EA6350v3

Issue occurs on 19.07 rc1, 19.07 rc2 and snapshot r11595 (snapshot version is by memory, but pretty sure that’s what I had on it).

Information for this bug report is based on 19.07 rc2 with the following packages installed for future potential use, but most not in use:
luci-app-sqm luci-proto-wireguard luci-app-wireguard ca-bundle curl https_dns_proxy luci-app-https_dns_proxy luci-app-statistics luci-app-samba kmod-usb-printer p910nd luci-app-p910nd diffutils minidlna luci-app-minidlna

Note: sqm, wireguard, https_dns_proxy, samba, usb printer, p910nd server, and minidlna are NOT in use. These are just the typical packages I add to my
router for future use.

Steps to reproduce:
Problem occurs after router runs for a few hours. EA6350v3 is set up as a wired access point for an EdgeRouter X (also on 19.07 rc2). The Edgerouter provides sqm and DNS and DHCP for LAN, guest and IOT VLANs. There are ~3 “Guest” 2.4 G wifi clients (a smart switch, an IP camera, a DEEBOT vacuum); the IOT VLAN is mapped to a physical port with an Ooma Telo plugged in (I know - I need to map the guest devices to IOT wifi someday...). The LAN is mapped to a physical port with a Roku 3 plugged in and to normal wifi. There are another ~4 or 5 5GHz wifi clients on the LAN wifi (a laptop, a couple Amazon Echo’s, a Google Home Mini, a Samsung Orbit Android phone) and a 2.4G LG Android phone on the 2.4 GHz wifi. CPU loading is quite low.

Memory usage starts out rather high (~100MB, climbs and climbs, eventually drops, climbs again, repeats. Eventually (a day or two) processes start getting killed to free up memory and things start dying. I have an EA8500 setup almost identically as a second AP in the house, and it’s memory usage sits around 50 MB versus 100MB to 200+MB for the EA6350v3. Something’s just not right...

The final message in the logs that repeats until processes begin to get killed is:

kern.warn kernel: [15897.905286] ath10k_ahb a000000.wifi: failed to increase tx pending count: -16, dropping

But the weird memory usage pattern precedes this message in the logs.

I’ve attached memory usage graphs and system and kernel logs from 19.07 rc2 to illustrate the problem. rc1 and snapshot behaved the same. This post also has logs showing processes getting killed if that helps diagnose: https://forum.openwrt.org/t/ipq4018-linksys-ea6350v3-wifi-dead-after-24-48-hrs/49080/3?u=eginnc

09.01.20202719Base systemBug ReportVery LowHighBuffalo WBMR-HP-G300H: DSL does not connect at all with...openwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: Buffalo WBMR-HP-G300H
- Software versions of OpenWrt/LEDE release, packages, etc.: OpenWRT 19.07, kmod-ltq-adsl-ar9-fw-a 0.1-1, which shows up as 4.4.4.0.0.1 in dsl_control status.
- Steps to reproduce:

1. Get an ADSL line from Rostelecom.
2. Upgrade the router to OpenWRT 19.07.
3. Reboot.

Result: DSL does not connect. In /etc/init.d/dsl_control status, it goes through all phases, then briefly shows as “Up”, but then the “dsl0” interface is not created, and the following lines are logged in dmesg:

 [   56.597766] [DSL_BSP_Showtime 914]: Datarate US intl = 1024000, fast = 0
 [   56.603091] [DSL_BSP_Showtime 934]: no hookup from ATM driver to set cell rate

The error does not exist with the 4.5.4.9.1.1 firmware obtained from unofficial sources. The bug has been submitted through the affected ADSL line with the unofficial firmware.

Status:

# /etc/init.d/dsl_control status
ATU-C Vendor ID: Broadcom 161.149
ATU-C System Vendor ID: 00,00,00,00,00,00,00,00
Chipset: Ifx-AR9
Firmware Version: 4.5.4.9.1.1
API Version: 3.24.4.4
XTSE Capabilities: 0×4, 0×0, 0×0, 0×0, 0×0, 0×0, 0×0, 0×0 Annex: A
Line Mode: G.992.1 (ADSL)
Profile:
Line State: UP [0×801: showtime_tc_sync]
Forward Error Correction Seconds (FECS): Near: 413342 / Far: 0
Errored seconds (ES): Near: 0 / Far: 0
Severely Errored Seconds (SES): Near: 0 / Far: 0
Loss of Signal Seconds (LOSS): Near: 0 / Far: 0
Unavailable Seconds (UAS): Near: 253 / Far: 253
Header Error Code Errors (HEC): Near: 0 / Far: 0
Non Pre-emtive CRC errors (CRC_P): Near: / Far:
Pre-emtive CRC errors (CRCP_P): Near: / Far:
Power Management Mode: L0 - Synchronized
Latency [Interleave Delay]: 8.0 ms [Interleave] 8.0 ms [Interleave]
Data Rate: Down: 9.952 Mb/s / Up: 1.024 Mb/s
Line Attenuation (LATN): Down: 32.2 dB / Up: 19.5 dB
Signal Attenuation (SATN): Down: 32.6 dB / Up: 19.5 dB
Noise Margin (SNR): Down: 6.1 dB / Up: 13.0 dB
Aggregate Transmit Power (ACTATP): Down: 20.0 dB / Up: 12.3 dB
Max. Attainable Data Rate (ATTNDR): Down: 8.848 Mb/s / Up: 1.204 Mb/s
Line Uptime Seconds: 1164
Line Uptime: 19m 24s

(yes, very bad line)

Config:

config atm-bridge ‘atm’

option vpi '1'
option encaps 'llc'
option payload 'bridged'
option nameprefix 'dsl'
option vci '50'
option unit '0'
option atmdev '0'

config dsl ‘dsl’

option annex 'a'
option firmware '/lib/firmware/dsl_ar9_firmware_adsl_a-04.05.04.09.01.01.bin'

config interface ‘wan’

option ifname 'dsl0'
option proto 'pppoe'
option ipv6 '1'
option username 'censored'
list dns '8.8.8.8'
list dns '8.8.4.4'
option peerdns '0'
option keepalive '60 5'
option password 'censored'
15.01.20202739Base systemBug ReportVery LowHighArbitrary File CreationAllUnconfirmed Task Description

There is no restriction on the path of the system log file(logread),which lead to overwritten important file,such as /etc/passwd. if /etc/passwd was overwritened,it will cause a denial of service. when a router was infected, The only way to fix is flash firmware.

In the background, function External Linkstart_service_file will deal the system logging request and use logread` to save log in specified file.

 PROG=/sbin/logread  
    
    start_service_file()                                                              
    {                                                                                 
            PIDCOUNT="$(( ${PIDCOUNT} + 1))"                                          
            local pid_file="/var/run/logread.${PIDCOUNT}.pid"                         
                                                                                      
            [ "$2" = 0 ] || {                                                         
                    echo "validation failed"                                          
                    return 1                                                          
            }                                                                         
            [ -z "${log_file}" ] && return                                            
                                                                                      
            mkdir -p "$(dirname "${log_file}")"                                       
                                                                                      
            procd_open_instance                                                       
            procd_set_param command "$PROG" -f -F "$log_file" -p "$pid_file"          
            [ -n "${log_size}" ] && procd_append_param command -S "$log_size"         
            procd_close_instance                                                      
    }   

POC

1. set the path of sustem log and buffer size

In System → logging page,System log buffer sizeset to 1KiB ,Write system log to file set to /etc/passwd. At the end , clicking “Save & Apply” button.

2. reboot or wait a moment

In order to produce some log to overwriten /etc/passwd , it need to reboot OpenWrt (the fasest way ) or wait a monent.

3. result

Denial of service: the LuCi web page display “Dad Gateway”. the same time , the internet was offline.

22.01.20202764Base systemBug ReportVery LowHighucert: ucert -A output is invalidTrunkUnconfirmed Task Description

ucert -A generates something that ucert cannot read back.

This happens because ucert -A appears to be appending several libubox “blobs” together, but cert_load() uses libubox’ blob_parse_untrusted() which expects to get a buffer with a single blob inside, and no padding.

Thus a valid ucert file with certificate and signature will be *bigger* than the first blob inside it, and blob_parse_untrusted() in libubox won’t even try to process it.

Since this renders ucert useless, severity is set to high.

This is related to  FS#2762  and FS#2763

30.01.20202783Base systemBug ReportVery LowHighTP-Link Archer A7 v5 can't be flashet via tftpopenwrt-19.07Unconfirmed Task Description

Device: TP-Link Archer A7 (RU) Ver 5.0
Software: OpenWRT 19.07.0

I just bought this router. And I trying to flash it with openwrt-19.07.0-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin trough tftp.
In wireshark I clearly see that file was downloaded. But router didn’t flashed.
I tried to flash snapshot image wtih same result.
I checked sha256 sums and it matches.

When I reproduced same steps with original TP-Link update image it worked well. Seems like something prevents router from flashing OpenWRT image.

30.01.20202785Base systemBug ReportVery LowHighkernel loading during netboot fails on mikrotik devicesopenwrt-19.07Unconfirmed Task Description

Devices tested:

  • Mikrotik rb433
  • Mikrotik rb435g

Software version: Using the v19.07.1 tag.

Issue: There are a few packages, whose are leading the ramdisk “unbbotable”, more precise the device is not able to load the kernel. First this happened by kmod-scsi-core , I thought it must be some kernel-related issue. Afterthat I realised that either I enable the aforementioned kernel-module, or the libraries called libpcre and libpci, the boot procedure will stop at:

Gateway: 192.168.1.254
transfer started ................................... transfer ok, time=2.61s
setting up elf image... OK
jumping to kernel code OpenWrt kernel loader for AR7XXX/AR9XXX
Copyright (C) 2011 Gabor Juhos juhosg@openwrt.org Decompressing kernel... done!
Starting kernel at 80060000...

Compiling these packages only as a module results a nice bootable image. Firstly I thought that maybe my ramdisk is too large, but it is about only 4,5 MB - previously using older trunk I was able to boot up images over 5 MByte.
I have pasted the config file to the ticket. If you switch libpcre and libpci to M instead of * it will boot.

This issue was not there before, using the image built from 18.06.

31.01.20202791Base systemBug ReportVery LowHighIPv6 router advertisments lost after upgrade to 19.07openwrt-19.07Unconfirmed Task Description

I’ve just upgraded my linksys wrt-1200ac from 18.06.4 to 19.07.0

I’ve got a more-or-less out-of-the-box configuration with wired and wireless clients all connected to the ‘br-lan’ bridge. My ISP provides native IPv6. I’ve got odhcpd-ip6only installed, and a mixture of clients, some using SLAAC and some using DHCPv6.

When a wireless client that is configured for SLAAC (e.g. an android phone) connects, it sends an IPv6 router solicitation to ff02::1 and receives a router advertisement on its fe80::<something> address. That still works fine. But the client never receives any further router adverts, so the route times out after 1800 seconds and IPv6 connectivity is lost.

This is *only* going wrong with wireless clients: tcpdump on a wired client shows router adverts arriving on ff02::1 every few minutes. But tcpdump on a wireless client shows no router adverts after the initial one.

I’ve retested with 18.06.4 and the problem does not exist in that version.

16.02.20202835Base systemBug ReportVery LowHighMT7621: Clients disconnects.openwrt-19.07Unconfirmed Task Description

Hi! I have MT7621 and when to router connected more than 10 peoples router start disconnecting some peoples(have two networks guest and main on 2,4).

There is my settings:
config wifi-iface ‘default_radio0’ option device ‘radio0’ option network ‘lan’ option mode ‘ap’ option wpa_disable_eapol_key_retries ‘1’ option key ‘WIFIPASS’ option ssid ‘WIFINAME’ option encryption ‘psk2+ccmp’ option disassoc_low_ack ‘0’ (guest network have same settings)

Other info:
Newifi-D2
MediaTek MT7621 ver:1 eco:3
OpenWrt 19.07.1 r10911-c155900f66 / LuCI openwrt-19.07 branch git-20.045.27998-49999e9

I also noticed that before the client is disconnected from the network, it will lose the Internet.

 

Issue on github: https://github.com/openwrt/mt76/issues/358

Many peoples with Newifi3 D2 have same problem(in github links and more details).

PLEASE, FIX IT!

18.02.20202844Base systemBug ReportVery LowHighath10k on archer C7 v2: high latencyopenwrt-19.07Unconfirmed Task Description

On my Archer C7 v2, since the upgrade from 18.06 to 19.07, I sometimes get very high latency on my 5 GHz wifi network:

This is when pinging a wireless client from the router itself.

ping 192.168.12.167
PING 192.168.12.167 (192.168.12.167): 56 data bytes
64 bytes from 192.168.12.167: seq=0 ttl=64 time=1.334 ms
64 bytes from 192.168.12.167: seq=1 ttl=64 time=2.002 ms
64 bytes from 192.168.12.167: seq=2 ttl=64 time=1004.448 ms
64 bytes from 192.168.12.167: seq=3 ttl=64 time=4.342 ms
64 bytes from 192.168.12.167: seq=4 ttl=64 time=1.072 ms
64 bytes from 192.168.12.167: seq=5 ttl=64 time=2.074 ms
64 bytes from 192.168.12.167: seq=6 ttl=64 time=2.505 ms
64 bytes from 192.168.12.167: seq=7 ttl=64 time=1.059 ms
64 bytes from 192.168.12.167: seq=8 ttl=64 time=1.746 ms
64 bytes from 192.168.12.167: seq=9 ttl=64 time=1.176 ms
64 bytes from 192.168.12.167: seq=10 ttl=64 time=1.086 ms
64 bytes from 192.168.12.167: seq=11 ttl=64 time=1.072 ms
64 bytes from 192.168.12.167: seq=12 ttl=64 time=815.290 ms
64 bytes from 192.168.12.167: seq=13 ttl=64 time=1004.417 ms
64 bytes from 192.168.12.167: seq=14 ttl=64 time=4.294 ms
64 bytes from 192.168.12.167: seq=15 ttl=64 time=4.520 ms
64 bytes from 192.168.12.167: seq=16 ttl=64 time=1003.250 ms
64 bytes from 192.168.12.167: seq=17 ttl=64 time=3.125 ms
64 bytes from 192.168.12.167: seq=18 ttl=64 time=1.019 ms
64 bytes from 192.168.12.167: seq=19 ttl=64 time=2.066 ms
^C
--- 192.168.12.167 ping statistics ---
20 packets transmitted, 20 packets received, 0% packet loss
round-trip min/avg/max = 1.019/193.094/1004.448 ms

The upgrade to 19.07.1 didn’t solve the issue. What (temporarily) seem to work is to restart the wlan0 interface. After a few hours the problem comes back. The client is very close to the AP (less than 3 meters, although there is a floor between). Signal quality is reported as very good.

Station 54:60:09:d3:e4:d6 (on wlan0)
        inactive time:  540 ms
        rx bytes:       1082546
        rx packets:     6294
        tx bytes:       15523400
        tx packets:     11636
        tx retries:     0
        tx failed:      1
        rx drop misc:   0
        signal:         -66 [-76, -68, -71] dBm
        signal avg:     -62 [-72, -64, -67] dBm
        tx bitrate:     390.0 MBit/s VHT-MCS 8 80MHz short GI VHT-NSS 1
        rx bitrate:     390.0 MBit/s VHT-MCS 8 80MHz short GI VHT-NSS 1
        rx duration:    422088 us
        last ack signal:-95 dBm
        authorized:     yes
        authenticated:  yes
        associated:     yes
        preamble:       long
        WMM/WME:        yes
        MFP:            no
        TDLS peer:      no
        DTIM period:    2
        beacon interval:100
        short slot time:yes
        connected time: 447 seconds

I am using stock 19.07.1 firmware. I also tried changing the regulatory domain from CA to US but it didn’t help.
I will now try with the non-ct driver and firmware to see if it helps, as it worked fine on 18.06 which didn’t include the -ct firmware by default.

cat /etc/config/wireless

config wifi-device 'radio0'
        option type 'mac80211'
        option hwmode '11a'
        option path 'pci0000:00/0000:00:00.0'
        option htmode 'VHT80'
        option noscan '1'
        option country 'US'
        option channel '149'

config wifi-iface 'default_radio0'
        option device 'radio0'
        option key 'removed'
        option network 'lan'
        option mode 'ap'
        option ssid 'myssid5'
        option encryption 'psk2+ccmp'

config wifi-device 'radio1'
        option type 'mac80211'
        option channel '11'
        option hwmode '11g'
        option path 'platform/ahb/ahb:apb/18100000.wmac'
        option noscan '1'
#       option country 'CA'
        option htmode 'HT40'
        option require_mode 'g'

config wifi-iface 'default_radio1'
        option device 'radio1'
        option network 'lan'
        option mode 'ap'
        option ssid 'myssid'
        option encryption 'psk2+ccmp'
        option key 'removed'
        option ieee80211w '1'
21.02.20202847Base systemBug ReportVery LowHighbetween ath79-master-r12157-a1cfe0dcbb and ath79-master...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
Netgear WNDR3700v2

- Software versions of OpenWrt/LEDE release, packages, etc.

between ath79-master-r12157-a1cfe0dcbb and ath79-master-r12259 including the rename from wndr3700v2 to wndr3700-v2 OpenWrt lost its capability to detect the two radios.

- Steps to reproduce

 


root@router:/tmp# cat /etc/banner

_______                     ________        __

| |.—–.—–.—–.| | | |.—-.| |_
| - || _ | -| || | | || _|| _|
|
_|| |_||||||| ||

        |__| W I R E L E S S   F R E E D O M

—————————————————– OpenWrt SNAPSHOT, r12157-a1cfe0dcbb


root@router:/tmp# dmesg
[ 0.000000] Linux version 4.19.98 (moeller@work-horse) (gcc version 8.3.0 (OpenWrt GCC 8.3.0 r12053-9e799f3eee)) #0 Fri Jan 31 22:29:40 2020
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[ 0.000000] MIPS: machine is Netgear WNDR3700v2
[ 0.000000] SoC: Atheros AR7161 rev 2
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0×0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0×0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0×0000000000000000-0x0000000003ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] Normal zone: 144 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] random: get_random_bytes called from start_kernel+0×98/0x4a8 with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 57516K/65536K available (4327K kernel code, 176K rwdata, 1020K rodata, 1188K init, 206K bss, 8020K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 51
[ 0.000000] CPU clock: 680.000 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5621354254 ns
[ 0.000008] sched_clock: 32 bits at 340MHz, resolution 2ns, wraps every 6316128254ns
[ 0.007800] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
[ 0.074071] pid_max: default: 32768 minimum: 301
[ 0.078916] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.085519] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.096880] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.106751] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.112960] pinctrl core: initialized pinctrl subsystem
[ 0.119019] NET: Registered protocol family 16
[ 0.428745] PCI host bridge /ahb/apb/pcie-controller@17010000 ranges:
[ 0.435198] MEM 0×0000000010000000..0x0000000016ffffff
[ 0.440426] IO 0×0000000000000000..0×0000000000000000 [ 0.463018] PCI host bridge to bus 0000:00
[ 0.467126] pci_bus 0000:00: root bus resource [mem 0×10000000-0x16ffffff]
[ 0.474044] pci_bus 0000:00: root bus resource [io 0×0000]
[ 0.479604] pci_bus 0000:00: root bus resource [??? 0×00000000 flags 0×0]
[ 0.486385] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.494769] pci 0000:00:11.0: [168c:ff1d] type 00 class 0×020000 [ 0.494800] pci 0000:00:11.0: reg 0×10: [mem 0×00000000-0x0000ffff]
[ 0.495095] pci 0000:00:12.0: [168c:ff1d] type 00 class 0×020000 [ 0.495122] pci 0000:00:12.0: reg 0×10: [mem 0×00000000-0x0000ffff]
[ 0.495679] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.495708] pci 0000:00:11.0: BAR 0: assigned [mem 0×10000000-0x1000ffff]
[ 0.502528] pci 0000:00:12.0: BAR 0: assigned [mem 0×10010000-0x1001ffff]
[ 0.512297] clocksource: Switched to clocksource MIPS
[ 0.518346] NET: Registered protocol family 2
[ 0.523491] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[ 0.531183] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.538204] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.544573] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.551058] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.556944] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.563492] NET: Registered protocol family 1
[ 0.567890] PCI: CLS 0 bytes, default 32
[ 0.570473] Crashlog allocated RAM at address 0x3f00000
[ 0.576987] workingset: timestamp_bits=14 max_order=14 bucket_order=0
[ 0.589206] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.595083] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 0.615469] io scheduler noop registered
[ 0.619388] io scheduler deadline registered (default)
[ 0.625206] ar7100-usb-phy 18030000.usb-phy: phy reset is missing
[ 0.632106] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.639111] console [ttyS0] disabled
[ 0.642766] 18020000.uart: ttyS0 at MMIO 0×18020000 (irq = 10, base_baud = 10625000) is a 16550A
[ 0.651550] console [ttyS0] enabled
[ 0.658520] bootconsole [early0] disabled
[ 0.672685] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.677766] 4 fixed-partitions partitions found on MTD device spi0.0
[ 0.684156] Creating 4 MTD partitions on “spi0.0”:
[ 0.688944] 0×000000000000-0×000000050000 : “u-boot” [ 0.694662] 0×000000050000-0×000000070000 : “u-boot-env” [ 0.700642] 0×000000070000-0x000000ff0000 : “firmware” [ 0.709051] 2 netgear-fw partitions found on MTD device firmware
[ 0.715111] Creating 2 MTD partitions on “firmware”:
[ 0.720073] 0×000000000000-0x0000001c4440 : “kernel” [ 0.725799] 0x0000001c4440-0x000000f80000 : “rootfs” [ 0.731378] mtd: device 4 (rootfs) set to be root filesystem
[ 0.738413] 1 squashfs-split partitions found on MTD device rootfs
[ 0.744648] 0x0000007b0000-0x000000f80000 : “rootfs_data” [ 0.750780] 0x000000ff0000-0×000001000000 : “art” [ 0.756658] Realtek RTL8366S ethernet switch driver version 0.2.2
[ 0.762862] rtl8366s rtl8366s: cannot find mdio node phandle
[ 0.768528] rtl8366s rtl8366s: using GPIO pins 5 (SDA) and 7 (SCK)
[ 0.774813] rtl8366s rtl8366s: RTL8366 ver. 1 chip found
[ 0.826529] libphy: rtl8366s: probed
[ 0.831545] libphy: Fixed MDIO Bus: probed
[ 1.184018] ag71xx 19000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 1.193617] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[ 1.533893] ag71xx 1a000000.eth: connected to PHY at rtl8366s:04 [uid=001cc960, driver=Generic PHY]
[ 1.543585] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: rgmii
[ 1.552067] NET: Registered protocol family 10
[ 1.561269] Segment Routing with IPv6
[ 1.565090] NET: Registered protocol family 17
[ 1.569586] 8021q: 802.1Q VLAN Support v1.8
[ 1.585516] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 1.596158] Freeing unused kernel memory: 1188K
[ 1.600682] This architecture does not have kernel memory protection.
[ 1.607138] Run /sbin/init as init process
[ 2.582308] random: fast init done
[ 2.807119] init: Console is alive
[ 2.810741] init: - watchdog -
[ 6.241610] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.383455] usbcore: registered new interface driver usbfs
[ 6.389022] usbcore: registered new interface driver hub
[ 6.394453] usbcore: registered new device driver usb
[ 6.430284] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 6.445010] SCSI subsystem initialized
[ 6.453749] ehci-platform: EHCI generic platform driver
[ 7.058167] ehci-platform 1b000000.usb: EHCI Host Controller
[ 7.063869] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
[ 7.071783] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000
[ 7.102319] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
[ 7.109300] hub 1-0:1.0: USB hub found
[ 7.113454] hub 1-0:1.0: 2 ports detected
[ 7.120810] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 7.128705] ohci-platform: OHCI generic platform driver
[ 7.134182] ohci-platform 1c000000.usb: Generic Platform OHCI controller
[ 7.140911] ohci-platform 1c000000.usb: new USB bus registered, assigned bus number 2
[ 7.148855] ohci-platform 1c000000.usb: irq 14, io mem 0x1c000000
[ 7.227154] hub 2-0:1.0: USB hub found
[ 7.231244] hub 2-0:1.0: 2 ports detected
[ 7.239911] usbcore: registered new interface driver usb-storage
[ 7.246968] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 7.257068] init: - preinit -
[ 7.952485] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 8.224006] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 8.239044] scsi host0: usb-storage 1-1:1.0
[ 8.607425] random: procd: uninitialized urandom read (4 bytes read)
[ 9.217736] random: jshn: uninitialized urandom read (4 bytes read)
[ 9.313323] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.01 PQ: 0 ANSI: 2
[ 9.324268] sd 0:0:0:0: [sda] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 9.435234] sd 0:0:0:0: [sda] Write Protect is off
[ 9.440027] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 9.441159] sd 0:0:0:0: [sda] No Caching mode page found
[ 9.446536] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.467635] sda: sda1 sda2
[ 9.485172] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 9.512732] random: jshn: uninitialized urandom read (4 bytes read)
[ 9.803851] random: jshn: uninitialized urandom read (4 bytes read)
[ 9.855143] random: jshn: uninitialized urandom read (4 bytes read)
[ 9.937787] random: jshn: uninitialized urandom read (4 bytes read)
[ 10.734464] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.792658] eth0: link up (1000Mbps/Full duplex)
[ 11.797336] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.002121] mount_root: loading kmods from internal overlay
[ 21.065763] kmodloader: loading kernel modules from etc/modules-boot.d/*
[ 21.074086] kmodloader: done loading kernel modules from
etc/modules-boot.d/*
[ 22.067245] jffs2: notice: (573) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (3 unchecked, 1 orphan) and 38 of xref (1 dead, 0 orphan) found.
[ 22.083539] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 22.104478] block: extroot: not configured
[ 22.493615] jffs2: notice: (571) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (3 unchecked, 1 orphan) and 38 of xref (1 dead, 0 orphan) found.
[ 22.512972] mount_root: loading kmods from internal overlay
[ 22.571532] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 22.586940] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 23.297496] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 23.311711] block: extroot: not configured
[ 23.317033] mount_root: switching to jffs2 overlay
[ 23.391179] overlayfs: upper fs does not support tmpfile.
[ 23.402971] urandom-seed: Seeding with /etc/urandom.seed
[ 23.506382] eth0: link down
[ 23.522968] procd: - early -
[ 23.525956] procd: - watchdog -
[ 24.224357] procd: - watchdog -
[ 24.227866] procd: - ubus -
[ 24.305816] urandom_read: 2 callbacks suppressed
[ 24.305823] random: ubusd: uninitialized urandom read (4 bytes read)
[ 24.321238] random: ubusd: uninitialized urandom read (4 bytes read)
[ 24.330097] procd: - init -
[ 25.653767] kmodloader: loading kernel modules from /etc/modules.d/*
[ 25.815614] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 25.855111] tun: Universal TUN/TAP device driver, 1.6
[ 25.878662] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 25.922686] gre: GRE over IPv4 demultiplexor driver
[ 25.944224] ip_gre: GRE over IPv4 tunneling driver
[ 26.291706] Mirror/redirect action on
[ 26.325462] u32 classifier
[ 26.328171] input device check on
[ 26.331822] Actions configured
[ 26.380723] Loading modules backported from Linux version v5.4-rc8-0-gaf42d3466bdc
[ 26.388336] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51
[ 26.401462] urngd: v1.0.2 started.
[ 26.492389] usbcore: registered new interface driver usbserial_generic
[ 26.498978] usbserial: USB Serial support registered for generic
[ 26.558787] wireguard: WireGuard 0.0.20200128 loaded. See www.wireguard.com for information.
[ 26.567273] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved.
[ 26.778103] xt_time: kernel timezone is -0000
[ 26.798642] ath9k_pci_owl_loader 0000:00:11.0: enabling device (0000 → 0002)
[ 26.806040] ath9k_pci_owl_loader 0000:00:12.0: enabling device (0000 → 0002)
[ 26.824088] ath9k_pci_owl_loader 0000:00:12.0: fixup device configuration
[ 26.832789] ath9k_pci_owl_loader 0000:00:11.0: fixup device configuration
[ 26.861449] pci 0000:00:12.0: [168c:0029] type 00 class 0×028000 [ 26.861487] pci 0000:00:12.0: reg 0×10: [mem 0×10010000-0x1001ffff]
[ 26.861542] pci 0000:00:12.0: PME# supported from D0 D3hot
[ 26.862141] pci 0000:00:12.0: BAR 0: assigned [mem 0×10010000-0x1001ffff]
[ 26.877545] pci 0000:00:11.0: [168c:0029] type 00 class 0×028000 [ 26.877582] pci 0000:00:11.0: reg 0×10: [mem 0×10000000-0x1000ffff]
[ 26.877638] pci 0000:00:11.0: PME# supported from D0 D3hot
[ 26.878247] pci 0000:00:11.0: BAR 0: assigned [mem 0×10000000-0x1000ffff]
[ 27.066477] random: crng init done
[ 27.156340] PPP generic driver version 2.4.2
[ 27.183974] PPP MPPE Compression module registered
[ 27.199611] NET: Registered protocol family 24
[ 27.218213] PPTP driver version 0.8.5
[ 27.368426] ath9k 0000:00:12.0: enabling device (0000 → 0002)
[ 27.408317] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[ 27.416965] ath: EEPROM regdomain: 0×0 [ 27.416971] ath: EEPROM indicates default country code should be used
[ 27.416974] ath: doing EEPROM country→regdmn map search
[ 27.416984] ath: country maps to regdmn code: 0x3a
[ 27.416989] ath: Country alpha2 being used: US
[ 27.416992] ath: Regpair used: 0x3a
[ 27.433820] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’ [ 27.435348] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0010000, irq=19
[ 27.442114] ath9k 0000:00:11.0: enabling device (0000 → 0002)
[ 27.584297] ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
[ 27.592914] ath: EEPROM regdomain: 0×0 [ 27.592920] ath: EEPROM indicates default country code should be used
[ 27.592923] ath: doing EEPROM country→regdmn map search
[ 27.592933] ath: country maps to regdmn code: 0x3a
[ 27.592938] ath: Country alpha2 being used: US
[ 27.592940] ath: Regpair used: 0x3a
[ 27.607441] ieee80211 phy1: Selected rate control algorithm ‘minstrel_ht’ [ 27.608985] ieee80211 phy1: Atheros AR9280 Rev:2 mem=0xb0000000, irq=18
[ 27.702755] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 44.364371] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
[ 44.414576] Adding 976560k swap on /dev/sda1. Priority:-2 extents:1 across:976560k
[ 48.643400] eth0: link up (1000Mbps/Full duplex)
[ 48.648969] br-lan: port 1(eth0) entered blocking state
[ 48.654275] br-lan: port 1(eth0) entered disabled state
[ 48.659807] device eth0 entered promiscuous mode
[ 48.692372] br-lan: port 1(eth0) entered blocking state
[ 48.697596] br-lan: port 1(eth0) entered forwarding state
[ 48.703176] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 48.790578] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 48.835679] IPv6: ADDRCONF(NETDEV_UP): eth1.2: link is not ready
[ 48.951180] IPv6: ADDRCONF(NETDEV_UP): eth1.7: link is not ready
[ 49.712398] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 51.437743] eth1: link up (1000Mbps/Full duplex)
[ 51.513573] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 51.582425] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.2: link becomes ready
[ 51.589118] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.7: link becomes ready
[ 54.282504] ath: EEPROM regdomain: 0×8114 [ 54.286516] ath: EEPROM indicates we should expect a country code
[ 54.292634] ath: doing EEPROM country→regdmn map search
[ 54.297928] ath: country maps to regdmn code: 0×37 [ 54.302722] ath: Country alpha2 being used: DE
[ 54.307157] ath: Regpair used: 0×37 [ 54.310630] ath: regdomain 0×8114 dynamically updated by user
[ 54.316523] ath: EEPROM regdomain: 0×8114 [ 54.320516] ath: EEPROM indicates we should expect a country code
[ 54.326609] ath: doing EEPROM country→regdmn map search
[ 54.331904] ath: country maps to regdmn code: 0×37 [ 54.336698] ath: Country alpha2 being used: DE
[ 54.341125] ath: Regpair used: 0×37 [ 54.344620] ath: regdomain 0×8114 dynamically updated by user
[ 54.836482] pppoe-wan: renamed from ppp0
[ 57.427192] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 57.492852] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 57.616731] br-lan: port 2(wlan0) entered blocking state
[ 57.622045] br-lan: port 2(wlan0) entered disabled state
[ 57.627773] device wlan0 entered promiscuous mode
[ 57.632654] br-lan: port 2(wlan0) entered blocking state
[ 57.637986] br-lan: port 2(wlan0) entered forwarding state
[ 57.693619] br-lan: port 3(wlan1) entered blocking state
[ 57.698935] br-lan: port 3(wlan1) entered disabled state
[ 57.704667] device wlan1 entered promiscuous mode
[ 58.525536] br-lan: port 2(wlan0) entered disabled state
[ 58.531209] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 58.537780] br-lan: port 3(wlan1) entered blocking state
[ 58.543145] br-lan: port 3(wlan1) entered forwarding state
[ 58.750884] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 58.757483] br-lan: port 2(wlan0) entered blocking state
[ 58.762856] br-lan: port 2(wlan0) entered forwarding state
[84181.737818] pppoe-wan: renamed from ppp0
[144550.658055] pppoe-wan: renamed from ppp0
[159913.299297] eth1: link down
[159918.352853] IPv6: ADDRCONF(NETDEV_UP): eth1.7: link is not ready
[159919.249344] eth1: link up (1000Mbps/Full duplex)
[159919.251734] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.7: link becomes ready
[159923.807531] eth1: link down
[159924.830488] eth1: link up (1000Mbps/Full duplex)
[159931.219728] eth1: link down
[159936.244722] IPv6: ADDRCONF(NETDEV_UP): eth1.7: link is not ready
[159950.979373] eth1: link up (1000Mbps/Full duplex)
[159950.982129] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.7: link becomes ready
[160110.252218] pppoe-wan: renamed from ppp0
[246512.671046] pppoe-wan: renamed from ppp0
[260793.131776] pppoe-wan: renamed from ppp0
[347195.313169] pppoe-wan: renamed from ppp0
[433596.980231] pppoe-wan: renamed from ppp0
[449177.428433] pppoe-wan: renamed from ppp0
[535580.336441] pppoe-wan: renamed from ppp0
root@router:~#

BusyBox v1.31.1 () built-in shell (ash)

_______                     ________        __

| |.—–.—–.—–.| | | |.—-.| |_
| - || _ | -| || | | || _|| _|
|
_|| |_||||||| ||

        |__| W I R E L E S S   F R E E D O M

—————————————————– OpenWrt SNAPSHOT, r12259-2f1cc5c3d5


root@router:~# dmesg
[ 0.000000] Linux version 4.19.101 (moeller@work-horse) (gcc version 8.3.0 (OpenWrt GCC 8.3.0 r12053-9e799f3eee)) #0 Tue Feb 18 15:10:31 2020
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[ 0.000000] MIPS: machine is Netgear WNDR3700 v2
[ 0.000000] SoC: Atheros AR7161 rev 2
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0×0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0×0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0×0000000000000000-0x0000000003ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] Normal zone: 144 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] random: get_random_bytes called from start_kernel+0×98/0x4a8 with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 57452K/65536K available (4336K kernel code, 180K rwdata, 1020K rodata, 1240K init, 206K bss, 8084K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 51
[ 0.000000] CPU clock: 680.000 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5621354254 ns
[ 0.000008] sched_clock: 32 bits at 340MHz, resolution 2ns, wraps every 6316128254ns
[ 0.007802] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
[ 0.074072] pid_max: default: 32768 minimum: 301
[ 0.078916] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.085519] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.096900] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.106767] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.112979] pinctrl core: initialized pinctrl subsystem
[ 0.119049] NET: Registered protocol family 16
[ 0.428873] PCI host bridge /ahb/apb/pcie-controller@17010000 ranges:
[ 0.435329] MEM 0×0000000010000000..0x0000000016ffffff
[ 0.440561] IO 0×0000000000000000..0×0000000000000000 [ 0.463724] PCI host bridge to bus 0000:00
[ 0.467827] pci_bus 0000:00: root bus resource [mem 0×10000000-0x16ffffff]
[ 0.474747] pci_bus 0000:00: root bus resource [io 0×0000]
[ 0.480307] pci_bus 0000:00: root bus resource [??? 0×00000000 flags 0×0]
[ 0.487093] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.495479] pci 0000:00:11.0: [168c:ff1d] type 00 class 0×020000 [ 0.495512] pci 0000:00:11.0: reg 0×10: [mem 0×00000000-0x0000ffff]
[ 0.495815] pci 0000:00:12.0: [168c:ff1d] type 00 class 0×020000 [ 0.495841] pci 0000:00:12.0: reg 0×10: [mem 0×00000000-0x0000ffff]
[ 0.496401] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.496430] pci 0000:00:11.0: BAR 0: assigned [mem 0×10000000-0x1000ffff]
[ 0.503258] pci 0000:00:12.0: BAR 0: assigned [mem 0×10010000-0x1001ffff]
[ 0.513082] clocksource: Switched to clocksource MIPS
[ 0.519172] NET: Registered protocol family 2
[ 0.524330] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[ 0.532014] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.539035] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.545408] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.551886] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.557771] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.564323] NET: Registered protocol family 1
[ 0.568729] PCI: CLS 0 bytes, default 32
[ 0.571378] Crashlog allocated RAM at address 0x3f00000
[ 0.577915] workingset: timestamp_bits=14 max_order=14 bucket_order=0
[ 0.590375] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.596252] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 0.616936] io scheduler noop registered
[ 0.620852] io scheduler deadline registered (default)
[ 0.626692] ar7100-usb-phy 18030000.usb-phy: phy reset is missing
[ 0.633681] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.640613] console [ttyS0] disabled
[ 0.644274] 18020000.uart: ttyS0 at MMIO 0×18020000 (irq = 10, base_baud = 10625000) is a 16550A
[ 0.653058] console [ttyS0] enabled
[ 0.660028] bootconsole [early0] disabled
[ 0.674536] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.679618] 4 fixed-partitions partitions found on MTD device spi0.0
[ 0.686021] Creating 4 MTD partitions on “spi0.0”:
[ 0.690808] 0×000000000000-0×000000050000 : “u-boot” [ 0.696550] 0×000000050000-0×000000070000 : “u-boot-env” [ 0.702548] 0×000000070000-0x000000ff0000 : “firmware” [ 0.711065] 2 netgear-fw partitions found on MTD device firmware
[ 0.717127] Creating 2 MTD partitions on “firmware”:
[ 0.722090] 0×000000000000-0x0000001c5440 : “kernel” [ 0.727837] 0x0000001c5440-0x000000f80000 : “rootfs” [ 0.733518] mtd: device 4 (rootfs) set to be root filesystem
[ 0.740540] 1 squashfs-split partitions found on MTD device rootfs
[ 0.746771] 0x0000007e0000-0x000000f80000 : “rootfs_data” [ 0.752926] 0x000000ff0000-0×000001000000 : “art” [ 0.758843] Realtek RTL8366S ethernet switch driver version 0.2.2
[ 0.765052] rtl8366s rtl8366s: cannot find mdio node phandle
[ 0.770719] rtl8366s rtl8366s: using GPIO pins 5 (SDA) and 7 (SCK)
[ 0.777005] rtl8366s rtl8366s: RTL8366 ver. 1 chip found
[ 0.827344] libphy: rtl8366s: probed
[ 0.833038] libphy: Fixed MDIO Bus: probed
[ 1.184827] ag71xx 19000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 1.194429] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[ 1.534679] ag71xx 1a000000.eth: connected to PHY at rtl8366s:04 [uid=001cc960, driver=Generic PHY]
[ 1.544386] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: rgmii
[ 1.552885] NET: Registered protocol family 10
[ 1.562197] Segment Routing with IPv6
[ 1.566017] NET: Registered protocol family 17
[ 1.570511] 8021q: 802.1Q VLAN Support v1.8
[ 1.587431] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 1.598222] Freeing unused kernel memory: 1240K
[ 1.602744] This architecture does not have kernel memory protection.
[ 1.609207] Run /sbin/init as init process
[ 2.583093] random: fast init done
[ 2.802168] init: Console is alive
[ 2.805875] init: - watchdog -
[ 6.090295] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.231212] usbcore: registered new interface driver usbfs
[ 6.236831] usbcore: registered new interface driver hub
[ 6.242219] usbcore: registered new device driver usb
[ 6.281739] SCSI subsystem initialized
[ 6.292568] usbcore: registered new interface driver usb-storage
[ 6.299577] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.309264] init: - preinit -
[ 8.224350] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.466243] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.754611] random: jshn: uninitialized urandom read (4 bytes read)
[ 9.618495] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.752825] urandom_read: 4 callbacks suppressed
[ 9.752833] random: procd: uninitialized urandom read (4 bytes read)
[ 10.673421] eth0: link up (1000Mbps/Full duplex)
[ 10.678056] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.006729] mount_root: loading kmods from internal overlay
[ 20.070104] kmodloader: loading kernel modules from etc/modules-boot.d/*
[ 20.078087] kmodloader: done loading kernel modules from
etc/modules-boot.d/*
[ 20.858277] jffs2_scan_eraseblock(): End of filesystem marker found at 0×30000 [ 20.865541] jffs2_build_filesystem(): unlocking the mtd device...
[ 20.865544] done.
[ 20.873637] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 78.939877] done.
[ 78.949323] jffs2: notice: (558) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 78.965200] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 78.972247] block: unable to load configuration (fstab: Entry not found)
[ 78.979108] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[ 78.985665] block: unable to load configuration (fstab: Entry not found)
[ 78.992448] block: attempting to load /etc/config/fstab
[ 79.062790] block: extroot: not configured
[ 79.566994] jffs2: notice: (556) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 80.268686] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 80.275845] block: unable to load configuration (fstab: Entry not found)
[ 80.282637] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[ 80.289201] block: unable to load configuration (fstab: Entry not found)
[ 80.296055] block: attempting to load /etc/config/fstab
[ 80.301752] block: extroot: not configured
[ 80.307978] mount_root: overlay filesystem has not been fully initialized yet
[ 80.321266] mount_root: switching to jffs2 overlay
[ 80.389579] overlayfs: upper fs does not support tmpfile.
[ 83.093791] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 83.182093] eth0: link down
[ 83.196988] procd: - early -
[ 83.199968] procd: - watchdog -
[ 83.834517] procd: - watchdog -
[ 83.837950] procd: - ubus -
[ 83.904783] random: ubusd: uninitialized urandom read (4 bytes read)
[ 83.912132] random: ubusd: uninitialized urandom read (4 bytes read)
[ 83.919702] procd: - init -
[ 84.893323] kmodloader: loading kernel modules from /etc/modules.d/*
[ 85.045275] tun: Universal TUN/TAP device driver, 1.6
[ 85.069431] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 85.119219] gre: GRE over IPv4 demultiplexor driver
[ 85.139270] ip_gre: GRE over IPv4 tunneling driver
[ 85.484432] Mirror/redirect action on
[ 85.511393] u32 classifier
[ 85.514167] input device check on
[ 85.517816] Actions configured
[ 85.563375] Loading modules backported from Linux version v5.4-rc8-0-gaf42d3466bdc
[ 85.570932] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51
[ 85.594056] urngd: v1.0.2 started.
[ 85.779351] usbcore: registered new interface driver usbserial_generic
[ 85.786017] usbserial: USB Serial support registered for generic
[ 85.834097] wireguard: WireGuard 0.0.20200215 loaded. See www.wireguard.com for information.
[ 85.842525] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved.
[ 86.062495] xt_time: kernel timezone is -0000
[ 86.197742] random: crng init done
[ 86.337283] PPP generic driver version 2.4.2
[ 86.361591] PPP MPPE Compression module registered
[ 86.378734] NET: Registered protocol family 24
[ 86.408191] PPTP driver version 0.8.5
[ 86.566705] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 104.504191] eth0: link up (1000Mbps/Full duplex)
[ 104.509789] br-lan: port 1(eth0) entered blocking state
[ 104.515094] br-lan: port 1(eth0) entered disabled state
[ 104.520630] device eth0 entered promiscuous mode
[ 104.604615] br-lan: port 1(eth0) entered blocking state
[ 104.609845] br-lan: port 1(eth0) entered forwarding state
[ 104.615450] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 104.663301] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 104.708562] IPv6: ADDRCONF(NETDEV_UP): eth1.2: link is not ready
[ 104.808242] IPv6: ADDRCONF(NETDEV_UP): eth1.7: link is not ready
[ 105.553190] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 106.773996] eth1: link up (1000Mbps/Full duplex)
[ 106.851719] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 106.911421] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.2: link becomes ready
[ 106.918175] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.7: link becomes ready
[ 108.903192] pppoe-wan: renamed from ppp0
root@router:~#

Note, the lack of anything related to the ath9K driver in the second dmesg.

Following the instructions on External Linkhttps://openwrt.org/docs/guide-user/network/wifi/basic to regenerate the wireless configuration:
rm -f /etc/config/wireless
wifi config

resulted in an empty /etc/config/wireless:
root@router:~# ls -all /etc/config/wireless
-rw-r–r– 1 root root 0 Feb 21 23:12 /etc/config/wireless
root@ router:~# cat /etc/config/wireless

Due to the rename of the platform from wndr3700v2 to wndr3700-v2 the build config had to be edited (recreated by a new run of menuconfig).

Let me know if I can do anything to help get this debugged.

25.02.20202856Base systemBug ReportVery LowHighWifi "dies" (hostapd drops all clients) on some ar71xx ...openwrt-19.07New Task Description

This issue is very strange, i don’t even know if it’s just faulty hardware but i have it happening on multiple devices now

Most affected hardware

  • Nanobridge M5 , in this case transmitting enough data can trigger it almost instantly
  • TL-WR841ND , in this case i had it happen like 3-4 times a year
  • CPE 210 v3 , in this case it happens like each week

For the last one, which is running 19.07 i found on the system log

Tue Feb 25 07:38:58 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED [redacted mac1]
Tue Feb 25 07:38:58 2020 daemon.info hostapd: wlan0: STA [redacted mac1] IEEE 802.11: disassociated due to inactivity
Tue Feb 25 07:38:59 2020 daemon.info hostapd: wlan0: STA [redacted mac1] IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Feb 25 07:41:32 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED [redacted mac2]
Tue Feb 25 07:41:32 2020 daemon.info hostapd: wlan0: STA [redacted mac2] IEEE 802.11: disassociated due to inactivity
Tue Feb 25 07:41:33 2020 daemon.info hostapd: wlan0: STA [redacted mac2] IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Feb 25 07:42:49 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 07:49:55 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 07:55:02 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:00:15 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:05:25 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:10:44 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:16:00 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
10.03.20202893Base systemBug ReportVery LowHighEthernet port not receiving data on Ubiquiti LiteAP ac ...TrunkUnconfirmed Task Description

Hi,

The Ubiquiti LiteAP ac (LAP-120) does not receive incoming packets via eth0 with the latest snapshot (OpenWrt SNAPSHOT, r12498-2a18840cc7):

root@OpenWrt:/# ifconfig 
br-lan    Link encap:Ethernet  HWaddr B4:FB:E4:FA:FA:FA
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fdaa:a708:e003::1/60 Scope:Global
          inet6 addr: fe80::b6fb:e4ff:fefa:fafa/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:4420 (4.3 KiB)

eth0      Link encap:Ethernet  HWaddr B4:FB:E4:FA:FA:FA  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:49 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:6622 (6.4 KiB)
          Interrupt:4

It works correctly with latest stable, 19.07.2.

Using tcpdump on the connected computer I see outgoing traffic from the device, but incoming traffic does not reach the device.

The device correctly detects link changes, but different link speeds make no difference:

[ 1536.519019] eth0: link down
[ 1536.522824] br-lan: port 1(eth0) entered disabled state
[ 1537.561807] eth0: link up (1000Mbps/Full duplex)
[ 1537.566554] br-lan: port 1(eth0) entered blocking state
[ 1537.571932] br-lan: port 1(eth0) entered forwarding state
[ 1541.719009] eth0: link down
[ 1541.722824] br-lan: port 1(eth0) entered disabled state
[ 1542.761703] eth0: link up (100Mbps/Half duplex)
[ 1542.766359] br-lan: port 1(eth0) entered blocking state
[ 1542.771738] br-lan: port 1(eth0) entered forwarding state
[ 1545.879008] eth0: link down
[ 1545.882820] br-lan: port 1(eth0) entered disabled state
[ 1546.921800] eth0: link up (10Mbps/Half duplex)
[ 1546.926365] br-lan: port 1(eth0) entered blocking state
[ 1546.931744] br-lan: port 1(eth0) entered forwarding state

Please find attached dmesg outputs for both snapshot (snap) and 19.07.2 (19072).

13.03.20202901Base systemBug ReportVery LowHighFlow offload not working properly in case of IPv6 (NAT6...openwrt-19.07Unconfirmed Task Description

Linksys WRT32X with NAT6 configuration.

On latest 19.07 branch r10959

With the flow_offload feature turned on, nat6 is not working properly.
The first (or several) TCP packets seemed to be fine but later packets were not properly transmitted. The connection was soon closed.

(In case of accessing ipv6.google.com, the browser would freeze. And the curl would freeze after receiving a portion of the HTML content.)

In the meantime, ICMPv6 worked normally.

After removing the FLOWOFFLOAD ip6tables record, everything is fine.
After inserting the `-m conntrack –cstate RELATED,ESTABLISHED -j ACCEPT` before the FLOWOFFLOAD everything is also fine.

IPv4 part looked normal even if flow_offload is on.

NAT6 worked on older versions like 18.04 branch with flow_offload enabled.

17.03.20202906Base systemBug ReportVery LowHighAdding v4 Static routes without selecting 'Advanced' Ta...openwrt-19.07Unconfirmed Task Description

Using Openwrt 19.07.2 release;
On TP-Link c2600 & N750(wdr4300 v1.4)

Observed behavior:

Adding a static v4 route i.e 172.16.253.0 via 172.16.253.254 in the Luci Static route page succesfully adds the route, and by default appears to select the local route table. However viewing the routes list in status or via ip r s on cli does not show the entry.

Work-Around:

Ensure that a different table is selected in the 'Advanced tab' then go back in and add it to the correct appropriate route table.



Expected behaviour:

Adding a static route add's it to the system route table irrespective of needing to switch into advanced tab and select a non-default route table first.


Showing tasks 51 - 100 of 1029 Page 2 of 21 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing