OpenWrt/LEDE Project

Welcome to the OpenWrt/LEDE Project bug reporting and issue tracking system

Problems to be reported here are for the OpenWrt/LEDE Project targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt/LEDE Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to lede-bugs@infradead.org.

OpenedIDCategory  ascTask TypePrioritySeveritySummaryReported InStatus
02.01.20213559Base systemBug ReportMediumLowuclient-fetch fails to download more than 2 filesAllNew Task Description

uclient-fetch has support for downloading several files:

uclient-fetch URL1 URL2 URL3 ...

However, this only works for the first two URLs. The third and above URLs simply cause uclient-fetch to re-download the second URL again.

In addition, only the first URL is checked for validity. If a subsequent URL is invalid, then the previous URL is re-used:

uclient-fetch http://example.com invalid

This example will download http://example.com twice.

01.01.20213552Base systemBug ReportMediumLowLinksys RE6500 bootloops with latest snapshotsTrunkNew Task Description

The RE6500 was working fine on an old 19.07 snapshot: OpenWrt 19.07-SNAPSHOT r10578-b3d70f628b

I sysupgraded to latest snapshot and it does not come up. Judging from the LEDs, it seems to bootloop.

Booting the latest snapshot initramfs through TFTP works. I sysupgraded again from the initramfs, and it still bootloops.

Possibly related to FS#3539. I will try to get a serial output to see what happens.

30.12.20203545Base systemBug ReportVery LowHighunusable channels 13, 12 & auto on raspberry pi 3b & ze...openwrt-19.07Unconfirmed Task Description

Channels 13, 12 and auto are unusuable despite a valid CRDA selection (PL).

Lack of functional support for channels 13 & 12 where those are legally available renders OpenWrt unusable as AP/client on raspberry pi 3 & zero w. Both share the same BRCM 43430 driver.

Auto selection is also crippled:
Wed Dec 30 04:16:49 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Configured channel (0) not found from the channel list of current mode (1) IEEE 802.11g
Wed Dec 30 04:16:49 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Hardware does not support configured channel

Both would be a showstopper. OpenWrt on such platforms is often picked for its AP capabilities.

+ iw reg get
global
country PL: DFS-ETSI
        (2400 - 2483 @ 40), (N/A, 20), (N/A)
        (5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
        (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
        (5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
        (5725 - 5875 @ 80), (N/A, 13), (N/A)
        (57000 - 66000 @ 2160), (N/A, 40), (N/A)

+ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='PL'
wireless.radio0.htmode='HT20'
wireless.radio0.channel='11'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='my_ssid'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.key='my_key'
wireless.default_radio0.hidden='1'
wireless.default_radio0.encryption='psk2'
+ uci set 'wireless.radio0.channel=13'
+ uci commit wireless
+ sleep 1
+ logread -f
+ logger start testing channel 13
+ wifi
Wed Dec 30 04:16:41 2020 user.notice root: start testing channel 13
+ sleep 3
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED MAC_ADDRESS_WAS_HERE
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED MAC_ADDRESS_WAS_HERE
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED MAC_ADDRESS_WAS_HERE
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Dec 30 04:16:41 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Dec 30 04:16:41 2020 daemon.notice netifd: Network device 'wlan0' link is down
Wed Dec 30 04:16:41 2020 daemon.notice netifd: Interface 'lan' has link connectivity loss
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8589): command failed: No error information (-524)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:42 2020 daemon.notice netifd: Interface 'lan' is now down
Wed Dec 30 04:16:42 2020 daemon.notice netifd: Interface 'lan' is disabled
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8612): command failed: No error information (-524)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8612): command failed: Not supported (-95)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8612): command failed: I/O error (-5)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Wed Dec 30 04:16:42 2020 daemon.notice netifd: radio0 (8612): command failed: Too many open files in system (-23)
Wed Dec 30 04:16:42 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Wed Dec 30 04:16:42 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Dec 30 04:16:42 2020 kern.info kernel: [ 8810.101885] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Dec 30 04:16:42 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:42 2020 daemon.err hostapd: Using interface wlan0 with hwaddr MAC_ADDRESS_WAS_HERE and ssid "my_ssid"
Wed Dec 30 04:16:42 2020 daemon.err hostapd: Failed to set beacon parameters
Wed Dec 30 04:16:42 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:42 2020 daemon.err hostapd: Interface initialization failed
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:42 2020 daemon.err hostapd: wlan0: Unable to setup interface.
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Dec 30 04:16:42 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Wed Dec 30 04:16:42 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Dec 30 04:16:42 2020 kern.err kernel: [ 8810.195905] ieee80211 phy0: brcmf_cfg80211_start_ap: Set Channel failed: chspec=4109, -52
Wed Dec 30 04:16:43 2020 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x7fb0bb4e60 user_data=0 handler=0x41d078
Wed Dec 30 04:16:43 2020 daemon.notice netifd: radio0 (8612): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 8118 path ()
Wed Dec 30 04:16:43 2020 daemon.notice netifd: radio0 (8612): Device setup failed: HOSTAPD_START_FAILED
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8225]: exiting on receipt of SIGTERM
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: started, version 2.80 cachesize 150
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: DNS service limited to local subnets
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain test
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain onion
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain localhost
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain local
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain invalid
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain bind
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain lan
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: reading /tmp/resolv.conf.auto
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain test
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain onion
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain localhost
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain local
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain invalid
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain bind
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using local addresses only for domain lan
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using nameserver IP_ADDRESS_WAS_HERE#53
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: using nameserver IP_ADDRESS_WAS_HERE#53
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: read /etc/hosts - 4 addresses
Wed Dec 30 04:16:43 2020 daemon.info dnsmasq[8765]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
+ logger end testing channel 13
Wed Dec 30 04:16:44 2020 user.notice root: end testing channel 13
+ kill '%1'
+ pkill -9 logread
+ set -x
+ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='PL'
wireless.radio0.htmode='HT20'
wireless.radio0.channel='13'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='my_ssid'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.key='my_key'
wireless.default_radio0.hidden='1'
wireless.default_radio0.encryption='psk2'
+ uci set 'wireless.radio0.channel=12'
+ uci commit wireless
+ sleep 1
+ logread -f
+ logger start testing channel 12
Wed Dec 30 04:16:45 2020 user.notice root: start testing channel 12
+ wifi
+ sleep 3
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8783): command failed: No error information (-524)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8803): command failed: No error information (-524)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8803): command failed: Not supported (-95)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8803): command failed: I/O error (-5)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Wed Dec 30 04:16:45 2020 daemon.notice netifd: radio0 (8803): command failed: Too many open files in system (-23)
Wed Dec 30 04:16:45 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Wed Dec 30 04:16:45 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Dec 30 04:16:45 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:45 2020 daemon.err hostapd: Using interface wlan0 with hwaddr MAC_ADDRESS_WAS_HERE and ssid "my_ssid"
Wed Dec 30 04:16:45 2020 kern.info kernel: [ 8813.087454] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Dec 30 04:16:45 2020 daemon.err hostapd: Failed to set beacon parameters
Wed Dec 30 04:16:45 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:45 2020 daemon.err hostapd: Interface initialization failed
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:45 2020 daemon.err hostapd: wlan0: Unable to setup interface.
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Wed Dec 30 04:16:45 2020 kern.err kernel: [ 8813.180327] ieee80211 phy0: brcmf_cfg80211_start_ap: Set Channel failed: chspec=4108, -52
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Dec 30 04:16:45 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Wed Dec 30 04:16:45 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Dec 30 04:16:46 2020 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x7fa178be60 user_data=0 handler=0x41d078
Wed Dec 30 04:16:46 2020 daemon.notice netifd: radio0 (8803): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 8118 path ()
Wed Dec 30 04:16:46 2020 daemon.notice netifd: radio0 (8803): Device setup failed: HOSTAPD_START_FAILED
+ logger end testing channel 12
Wed Dec 30 04:16:48 2020 user.notice root: end testing channel 12
+ kill '%1'
+ pkill -9 logread
+ set -x
+ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='PL'
wireless.radio0.htmode='HT20'
wireless.radio0.channel='12'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='my_ssid'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.key='my_key'
wireless.default_radio0.hidden='1'
wireless.default_radio0.encryption='psk2'
+ uci set 'wireless.radio0.channel=auto'
+ uci commit wireless
+ sleep 1
+ logread -f
+ logger start testing channel auto
Wed Dec 30 04:16:49 2020 user.notice root: start testing channel auto
+ wifi
+ sleep 3
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8880): command failed: No error information (-524)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8900): command failed: No error information (-524)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8900): command failed: Not supported (-95)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8900): command failed: I/O error (-5)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Wed Dec 30 04:16:49 2020 daemon.notice netifd: radio0 (8900): command failed: Too many open files in system (-23)
Wed Dec 30 04:16:49 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Wed Dec 30 04:16:49 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Wed Dec 30 04:16:49 2020 kern.info kernel: [ 8817.154489] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Dec 30 04:16:49 2020 kern.err kernel: [ 8817.166683] ieee80211 phy0: brcmf_run_escan: error (-52)
Wed Dec 30 04:16:49 2020 kern.err kernel: [ 8817.173057] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52)
Wed Dec 30 04:16:49 2020 kern.err kernel: [ 8817.184908] ieee80211 phy0: brcmf_run_escan: error (-52)
Wed Dec 30 04:16:49 2020 kern.err kernel: [ 8817.191232] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52)
Wed Dec 30 04:16:49 2020 daemon.err hostapd: ACS: Failed to request initial scan
Wed Dec 30 04:16:49 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Configured channel (0) not found from the channel list of current mode (1) IEEE 802.11g
Wed Dec 30 04:16:49 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Hardware does not support configured channel
Wed Dec 30 04:16:49 2020 daemon.err hostapd: Could not select hw_mode and channel. (-3)
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:49 2020 daemon.err hostapd: wlan0: Unable to setup interface.
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Dec 30 04:16:49 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Wed Dec 30 04:16:49 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Dec 30 04:16:50 2020 daemon.notice netifd: radio0 (8900): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 8118 path ()
Wed Dec 30 04:16:50 2020 daemon.notice netifd: radio0 (8900): Device setup failed: HOSTAPD_START_FAILED
+ logger end testing channel auto
Wed Dec 30 04:16:52 2020 user.notice root: end testing channel auto
+ kill '%1'
+ pkill -9 logread
+ set -x
+ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='PL'
wireless.radio0.htmode='HT20'
wireless.radio0.channel='auto'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='my_ssid'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.key='my_key'
wireless.default_radio0.hidden='1'
wireless.default_radio0.encryption='psk2'
+ uci set 'wireless.radio0.channel=11'
+ uci commit wireless
+ sleep 1
+ logread -f
+ logger start testing channel 11
Wed Dec 30 04:16:53 2020 user.notice root: start testing channel 11
+ wifi
+ sleep 3
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8970): command failed: No error information (-524)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8990): command failed: No error information (-524)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw dev wlan0 del
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8990): command failed: Not supported (-95)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna_gain 0
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8990): command failed: I/O error (-5)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Wed Dec 30 04:16:53 2020 daemon.notice netifd: radio0 (8990): command failed: Too many open files in system (-23)
Wed Dec 30 04:16:53 2020 user.notice mac80211: Failed command: iw phy phy0 interface add wlan0 type __ap
Wed Dec 30 04:16:53 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Dec 30 04:16:53 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Dec 30 04:16:53 2020 daemon.warn hostapd: wlan0: Could not connect to kernel driver
Wed Dec 30 04:16:53 2020 daemon.err hostapd: Using interface wlan0 with hwaddr MAC_ADDRESS_WAS_HERE and ssid "my_ssid"
Wed Dec 30 04:16:53 2020 kern.info kernel: [ 8821.268054] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Dec 30 04:16:53 2020 kern.info kernel: [ 8821.429792] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Wed Dec 30 04:16:53 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED
Wed Dec 30 04:16:53 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Network device 'wlan0' link is up
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Interface 'lan' is enabled
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Interface 'lan' is setting up now
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Interface 'lan' is now up
Wed Dec 30 04:16:53 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Dec 30 04:16:54 2020 user.notice firewall: Reloading firewall due to ifup of lan (wlan0)
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[8765]: exiting on receipt of SIGTERM
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: started, version 2.80 cachesize 150
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: DNS service limited to local subnets
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq-dhcp[9156]: DHCP, IP range IP_ADDRESS_WAS_HERE -- IP_ADDRESS_WAS_HERE, lease time 12h
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain test
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain onion
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain localhost
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain local
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain invalid
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain bind
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain lan
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: reading /tmp/resolv.conf.auto
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain test
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain onion
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain localhost
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain local
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain invalid
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain bind
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using local addresses only for domain lan
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using nameserver IP_ADDRESS_WAS_HERE#53
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: using nameserver IP_ADDRESS_WAS_HERE#53
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: read /etc/hosts - 4 addresses
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq[9156]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Wed Dec 30 04:16:55 2020 daemon.info dnsmasq-dhcp[9156]: read /etc/ethers - 0 addresses
+ logger end testing channel 11
Wed Dec 30 04:16:56 2020 user.notice root: end testing channel 11
+ kill '%1'
+ pkill -9 logread
+ iw list
Wiphy phy0
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 1:
                Capabilities: 0x1020
                        HT20
                        Static SM Power Save
                        RX HT20 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-7
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (20.0 dBm)
                        * 2442 MHz [7] (20.0 dBm)
                        * 2447 MHz [8] (20.0 dBm)
                        * 2452 MHz [9] (20.0 dBm)
                        * 2457 MHz [10] (20.0 dBm)
                        * 2462 MHz [11] (20.0 dBm)
                        * 2467 MHz [12] (20.0 dBm)
                        * 2472 MHz [13] (20.0 dBm)
                        * 2484 MHz [14] (disabled)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 2
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
        Supported extended features:
                * [ 4WAY_HANDSHAKE_STA_PSK ]: 4-way handshake with PSK in station mode
                * [ 4WAY_HANDSHAKE_STA_1X ]: 4-way handshake with 802.1X in station mode
+ iwlist wlan0 channel
wlan0     13 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
29.12.20203544Base systemBug ReportVery LowCritical5GHz band of several ath10k devices are completely unus...TrunkUnconfirmed Task Description

- Device: Custom router board with mini PCIE slots
- Software version: OpenWrt SNAPSHOT r0-7e4585e
- Steps to reproduce:
* Git clone https://github.com/openwrt/openwrt then build with default configuration + enable ath10k & fw.
* Install an ath10k card (tested: QCA9880, QCA6174) on router board, and flash image to device.
* Run `iw list` and every 5GHz band is disabled.

Changing country code via LuCI and `iw reg set` won’t help.

Using ath10k-ct won’t help as well.

ath9k is not affected.

Logs are in attachments.

27.12.20203539Base systemBug ReportVery LowLowramips/mt7620 snapshot does not bootTrunkUnconfirmed Task Description

It’s happening on
- ramips/mt7620 D-Link DWR 960 with the snapshot of 2020/12/26
- r14281 from 2020/08/26 is working good.

- Steps to reproduce:

Install the factory image onto the stock firmware - or - install the sysupgrade onto the running r14281.

- Findings:

The snapshot version is booted when attempting to get into JBOOT but doesn’t come up automatically.

Please guide/advise. Thank you.
Thomas

- Console output:

1. Regular/Working:
CDG56CDL_0T3 Jboot B972
JRecovery Version R1.2 2016/11/15 14:11
spi device id: ef 40 18 0 0 (40180000)
SPI FLASH: W25Q128FV 16M
.
....................
Starting kernel @ 80000000 ...

2. Bricked state, regular boot:
CDG56CDL_0T3 Jboot B972
JRecovery Version R1.2 2016/11/15 14:11
spi device id: ef 40 18 0 0 (40180000)
SPI FLASH: W25Q128FV 16M
.
.<nothing from here>

3. Bricked state, booting into JBOOT (Hold reset button, power on)
CDG56CDL_0T3 Jboot B972
JRecovery Version R1.2 2016/11/15 14:11
spi device id: ef 40 18 0 0 (40180000)
SPI FLASH: W25Q128FV 16M
.
Reset button had been pressed. <Release Reset button here>
....................
Starting kernel @ 80000000 ...
and the snapshot is booted

4. JBOOT in working state:

CDG56CDL_0T3 Jboot B972
JRecovery Version R1.2 2016/11/15 14:11
spi device id: ef 40 18 0 0 (40180000)
SPI FLASH: W25Q128FV 16M
.
Reset button had been pressed.
Reset button had been pressed
IP = 192.168.123.254 NA = XX:XX:XX:XX:XX:XX

mtd layout on working r14281 (2020/08/26):
root@OpenWrt:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00010000 00001000 “jboot” mtd1: 00fe0000 00001000 “firmware” mtd2: 001fc82e 00001000 “kernel” mtd3: 00de37d2 00001000 “rootfs” mtd4: 00b4d000 00001000 “rootfs_data” mtd5: 00010000 00001000 “config” root@OpenWrt:~#

26.12.20203537Base systemBug ReportVery LowLowramips-mt7621: rcu_sched self-detected stall on CPUopenwrt-19.07Unconfirmed Task Description

Model: UBNT-ERX
Architecture: MediaTek MT7621 ver:1 eco:3
Firmware Version: OpenWrt 19.07.5 r11257-5090152ae3 / LuCI openwrt-19.07 branch git-20.341.57626-51f55b5
Kernel Version: 4.14.209

Dec 26 04:25:15 portcullis kernel: [ 2585.035949] INFO: rcu_sched self-detected stall on CPU
Dec 26 04:25:15 portcullis kernel: [ 2585.046207] #0111-...: (1 GPs behind) idle=fa2/140000000000001/0 softirq=140901/140903 fqs=2999
Dec 26 04:25:15 portcullis kernel: [ 2585.055938] INFO: rcu_sched detected stalls on CPUs/tasks:
Dec 26 04:25:15 portcullis kernel: [ 2585.063154] #011 (t=6002 jiffies g=43502 c=43501 q=1838)
Dec 26 04:25:15 portcullis kernel: [ 2585.084122] NMI backtrace for cpu 1
Dec 26 04:25:15 portcullis kernel: [ 2585.091055] CPU: 1 PID: 6770 Comm: kworker/1:1 Not tainted 4.14.209 #0
Dec 26 04:25:15 portcullis kernel: [ 2585.104071] Workqueue: events_power_efficient 0x8f270cac [nf_flow_table@8f270000+0x3370]
Dec 26 04:25:15 portcullis kernel: [ 2585.120162] Stack : 00000000 00000000 804d7568 8fc0bd24 00000000 00000000 00000000 00000000
Dec 26 04:25:15 portcullis kernel: [ 2585.136792]         00000000 00000000 00000000 00000000 00000000 00000001 8fc0bce0 53261630
Dec 26 04:25:15 portcullis kernel: [ 2585.153422]         8fc0bd78 00000000 00000000 00003ff0 00000038 8049da98 00000007 00000000
Dec 26 04:25:15 portcullis kernel: [ 2585.170054]         00000000 80550000 00019687 00000000 8fc0bcc0 00000000 00000000 00000001
Dec 26 04:25:15 portcullis kernel: [ 2585.186686]         80554500 8054c0cc 000000e0 80550000 00000003 802ae190 00000004 806b0004
Dec 26 04:25:15 portcullis kernel: [ 2585.203314]         ...
Dec 26 04:25:15 portcullis kernel: [ 2585.208170] Call Trace:
Dec 26 04:25:15 portcullis kernel: [ 2585.208185] [<8049da98>] 0x8049da98
Dec 26 04:25:15 portcullis kernel: [ 2585.219960] [<802ae190>] 0x802ae190
Dec 26 04:25:15 portcullis kernel: [ 2585.226888] [<8000c1a0>] 0x8000c1a0
Dec 26 04:25:15 portcullis kernel: [ 2585.233814] [<8000c1a8>] 0x8000c1a8
Dec 26 04:25:15 portcullis kernel: [ 2585.240741] [<804868d4>] 0x804868d4
Dec 26 04:25:15 portcullis kernel: [ 2585.247669] [<80072c54>] 0x80072c54
Dec 26 04:25:15 portcullis kernel: [ 2585.254594] [<8048d8f4>] 0x8048d8f4
Dec 26 04:25:15 portcullis kernel: [ 2585.261522] [<80008f30>] 0x80008f30
Dec 26 04:25:15 portcullis kernel: [ 2585.268451] [<80008f30>] 0x80008f30
Dec 26 04:25:15 portcullis kernel: [ 2585.275376] [<8048d9e0>] 0x8048d9e0
Dec 26 04:25:15 portcullis kernel: [ 2585.282304] [<80086558>] 0x80086558
Dec 26 04:25:15 portcullis kernel: [ 2585.289233] [<800859a8>] 0x800859a8
Dec 26 04:25:15 portcullis kernel: [ 2585.296175] [<8f270000>] 0x8f270000 [nf_flow_table@8f270000+0x3370]
Dec 26 04:25:15 portcullis kernel: [ 2585.308690] [<8f270000>] 0x8f270000 [nf_flow_table@8f270000+0x3370]
Dec 26 04:25:15 portcullis kernel: [ 2585.321147] [<80089118>] 0x80089118
Dec 26 04:25:15 portcullis kernel: [ 2585.328076] [<8009a168>] 0x8009a168
Dec 26 04:25:15 portcullis kernel: [ 2585.335003] [<80332644>] 0x80332644
Dec 26 04:25:15 portcullis kernel: [ 2585.341930] [<80079328>] 0x80079328
Dec 26 04:25:15 portcullis kernel: [ 2585.348859] [<800735e0>] 0x800735e0
Dec 26 04:25:15 portcullis kernel: [ 2585.355785] [<8025bd98>] 0x8025bd98
Dec 26 04:25:15 portcullis kernel: [ 2585.362712] [<8025bc44>] 0x8025bc44
Dec 26 04:25:15 portcullis kernel: [ 2585.369641] [<8025be04>] 0x8025be04
Dec 26 04:25:15 portcullis kernel: [ 2585.376569] [<800735e0>] 0x800735e0
Dec 26 04:25:15 portcullis kernel: [ 2585.383494] [<804a475c>] 0x804a475c
Dec 26 04:25:15 portcullis kernel: [ 2585.390421] [<8025b4c0>] 0x8025b4c0
Dec 26 04:25:15 portcullis kernel: [ 2585.397362] [<80007488>] 0x80007488
Dec 26 04:25:15 portcullis kernel: [ 2585.404285]
Dec 26 04:25:15 portcullis kernel: [ 2585.407315] #0111-...: (1 GPs behind) idle=fa2/140000000000001/0 softirq=140901/140903 fqs=2999
Dec 26 04:25:15 portcullis kernel: [ 2585.424318] #011(detected by 2, t=6038 jiffies, g=43502, c=43501, q=1838)
Dec 26 04:25:15 portcullis kernel: [ 2585.437422] Sending NMI from CPU 2 to CPUs 1:
Dec 26 04:25:15 portcullis kernel: [ 2585.446128] NMI backtrace for cpu 1
Dec 26 04:25:15 portcullis kernel: [ 2585.453060] CPU: 1 PID: 6770 Comm: kworker/1:1 Not tainted 4.14.209 #0
Dec 26 04:25:15 portcullis kernel: [ 2585.466048] Workqueue: events_power_efficient 0x8f270cac [nf_flow_table@8f270000+0x3370]
Dec 26 04:25:15 portcullis kernel: [ 2585.482140] task: 8f056c60 task.stack: 8fe7e000
Dec 26 04:25:15 portcullis kernel: [ 2585.491139] $ 0   : 00000000 00000001 00000000 00000000
Dec 26 04:25:15 portcullis kernel: [ 2585.501534] $ 4   : 00000006 00080000 00036fb8 00036fb8
Dec 26 04:25:15 portcullis kernel: [ 2585.511929] $ 8   : 0000ffff ffff0000 00000002 fffffffe
Dec 26 04:25:15 portcullis kernel: [ 2585.522324] $12   : 80553530 00000040 ffffffff 00000206
Dec 26 04:25:15 portcullis kernel: [ 2585.532719] $16   : 8f3a297c 81224320 8054c1e8 00080000
Dec 26 04:25:15 portcullis kernel: [ 2585.543114] $20   : 805ab344 8f3a297c 80550000 8056dba0
Dec 26 04:25:15 portcullis kernel: [ 2585.553511] $24   : 3b9aca00 00000000
Dec 26 04:25:15 portcullis kernel: [ 2585.563911] $28   : 8fe7e000 8fe7fdc8 8f270000 8006be90
Dec 26 04:25:15 portcullis kernel: [ 2585.574324] Hi    : 00000133
Dec 26 04:25:15 portcullis kernel: [ 2585.580041] Lo    : 33333380
Dec 26 04:25:15 portcullis kernel: [ 2585.585760] epc   : 8006bf2c 0x8006bf2c
Dec 26 04:25:15 portcullis kernel: [ 2585.593380] ra    : 8006be90 0x8006be90
Dec 26 04:25:15 portcullis kernel: [ 2585.600997] Status: 11007c03#011KERNEL EXL IE
Dec 26 04:25:15 portcullis kernel: [ 2585.609320] Cause : 50800400 (ExcCode 00)
Dec 26 04:25:15 portcullis kernel: [ 2585.617285] PrId  : 0001992f (MIPS 1004Kc)
Dec 26 04:25:15 portcullis kernel: [ 2585.625423] CPU: 1 PID: 6770 Comm: kworker/1:1 Not tainted 4.14.209 #0
Dec 26 04:25:15 portcullis kernel: [ 2585.638413] Workqueue: events_power_efficient 0x8f270cac [nf_flow_table@8f270000+0x3370]
Dec 26 04:25:15 portcullis kernel: [ 2585.654499] Stack : 00000000 00000000 804d7568 8fc0bd64 00000000 00000000 00000000 00000000
Dec 26 04:25:15 portcullis kernel: [ 2585.671127]         00000000 00000000 00000000 00000000 00000000 00000001 8fc0bd20 53261630
Dec 26 04:25:15 portcullis kernel: [ 2585.687754]         8fc0bdb8 00000000 00000000 00004c50 00000038 8049da98 00000007 00000000
Dec 26 04:25:15 portcullis kernel: [ 2585.704382]         00000000 80550000 0009bdcd 00000000 8fc0bd00 00000000 00000000 00000001
Dec 26 04:25:15 portcullis kernel: [ 2585.721009]         804dee64 8053f420 804dca54 80550000 00000003 802ae190 00000004 806b0004
Dec 26 04:25:15 portcullis kernel: [ 2585.737636]         ...
Dec 26 04:25:15 portcullis kernel: [ 2585.742490] Call Trace:
Dec 26 04:25:15 portcullis kernel: [ 2585.742501] [<8049da98>] 0x8049da98
Dec 26 04:25:15 portcullis kernel: [ 2585.754275] [<802ae190>] 0x802ae190
Dec 26 04:25:15 portcullis kernel: [ 2585.761202] [<8000c1a0>] 0x8000c1a0
Dec 26 04:25:15 portcullis kernel: [ 2585.768130] [<8000c1a8>] 0x8000c1a8
Dec 26 04:25:15 portcullis kernel: [ 2585.775054] [<804868d4>] 0x804868d4
Dec 26 04:25:15 portcullis kernel: [ 2585.781981] [<8000c264>] 0x8000c264
Dec 26 04:25:15 portcullis kernel: [ 2585.788910] [<8048d8d4>] 0x8048d8d4
Dec 26 04:25:15 portcullis kernel: [ 2585.795835] [<80009044>] 0x80009044
Dec 26 04:25:15 portcullis kernel: [ 2585.802763] [<80009054>] 0x80009054
Dec 26 04:25:15 portcullis kernel: [ 2585.809714] [<80059f4c>] 0x80059f4c
Dec 26 04:25:15 portcullis kernel: [ 2585.816642] [<800a1740>] 0x800a1740
Dec 26 04:25:15 portcullis kernel: [ 2585.823569] [<80085e60>] 0x80085e60
Dec 26 04:25:15 portcullis kernel: [ 2585.830501] [<80011860>] 0x80011860
Dec 26 04:25:15 portcullis kernel: [ 2585.837450] [<8f270000>] 0x8f270000 [nf_flow_table@8f270000+0x3370]
Dec 26 04:25:15 portcullis kernel: [ 2585.849909] [<80074180>] 0x80074180
Dec 26 04:25:15 portcullis kernel: [ 2585.856849] [<8f270000>] 0x8f270000 [nf_flow_table@8f270000+0x3370]
Dec 26 04:25:15 portcullis kernel: [ 2585.869309] [<800742b4>] 0x800742b4
Dec 26 04:25:15 portcullis kernel: [ 2585.876241] [<80074358>] 0x80074358
Dec 26 04:25:15 portcullis kernel: [ 2585.883167] [<80332644>] 0x80332644
Dec 26 04:25:15 portcullis kernel: [ 2585.890095] [<80078510>] 0x80078510
Dec 26 04:25:15 portcullis kernel: [ 2585.897024] [<800735e0>] 0x800735e0
Dec 26 04:25:15 portcullis kernel: [ 2585.903949] [<800735e0>] 0x800735e0
Dec 26 04:25:15 portcullis kernel: [ 2585.910876] [<8025bd98>] 0x8025bd98
Dec 26 04:25:15 portcullis kernel: [ 2585.917803] [<8025bc44>] 0x8025bc44
Dec 26 04:25:15 portcullis kernel: [ 2585.924730] [<8025be04>] 0x8025be04
Dec 26 04:25:15 portcullis kernel: [ 2585.931658] [<800735e0>] 0x800735e0
Dec 26 04:25:15 portcullis kernel: [ 2585.938586] [<804a475c>] 0x804a475c
Dec 26 04:25:15 portcullis kernel: [ 2585.945512] [<8025b4c0>] 0x8025b4c0
Dec 26 04:25:15 portcullis kernel: [ 2585.952450] [<80007488>] 0x80007488
Dec 26 04:25:15 portcullis kernel: [ 2585.959376]
25.12.20203534Base systemBug ReportVery LowLowZBT-WE826 (16M) zram-swapopenwrt-19.07Unconfirmed Task Description

I build
openwrt-ramips-mt7620-zbt-we826-16M-squashfs-sysupgrade.bin
from v19.07.5

If I enable
kmod-zram
zram-swap
then /tmp partition creates as zram, but the size of /tmp less then 16M - the sysupgrade.bin image size.

So run

sysupgrade

impossible, and upgrade system via web-GUI impossible too.

Without kmod-zram - all right.

25.12.20203533Base systemBug ReportVery LowHighrelayd can't relay packets between lan pc and the openw...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on MediaTek MT7620A ver:2 eco:6
- Software versions

  URL: https://github.com/openwrt/openwrt.git/trunk
  Relative URL: ^/trunk
  Repository Root: https://github.com/openwrt/openwrt.git
  Repository UUID: 48f6a8c1-d3d8-b121-14bd-ce57b7db7bff
  Revision: 92580

- Steps to reproduce

 1. add wifi client
 2. add relay bridge interface between wlan and lan
 3. the wlan interface get ip 192.168.3.136, the pc in lan get ip 192.168.3.128, the ip of root ap was 192.168.3.1
 4. the pc can ping 192.168.3.1 but can not ping 192.168.3.136


23.12.20203530Base systemBug ReportVery LowHighD-Link DIR-645 not maintaining WLAN connectionopenwrt-19.07Unconfirmed Task Description

- Device problem occurs on
D-Link DIR-645 Rev. A1

- Software versions of OpenWrt/LEDE release, packages, etc.
LEDE 19.07.4

- Steps to reproduce
Setup the wireless connection. After some time the WLAN connection stops working. A restart is necessary to regain WLAN.

Topic is discussed in the forums:
https://forum.lede-project.org/t/d-link-dir-645-wifi-interface-not-maintaining-connection/6277

I am able and willing to provide log files. But I am new to the business of debugging itself. Help and guidance welcome!

Reference links:
https://forum.lede-project.org/t/d-link-dir-645-wifi-interface-not-maintaining-connection/6277 https://forum.openwrt.org/t/assistance-needed-debugging-wlan-d-link-dir-645/18664

23.12.20203528Base systemBug ReportVery LowLowrpcd may crash during list setTrunkUnconfirmed Task Description

The root cause of this bug is the same as for bug #3126:
https://bugs.openwrt.org/index.php?do=details&task_id=3126

Description
It is possible to crash rpcd using uci set method.
To do it we need to set a nonempty list to an empty string and make any other operation with the same section.
For example, change the value of any other option.

The bug is not fixed on the latest version(s) of rpcd/uci.
Successfully reproduced on OpenWrt release 19.07 (VirtualBox).
The bug can be reproduced on any device since it is not hardware dependent.

Steps to reproduce
On clean(after firstboot) openwrt release 19.07 run:

ubus call uci set '{"config":"firewall","section":"cfg02dc81","type":"zone","values":{"network":"","name":"iptv"}}}'

After that rpcd may crash.

Since the bug doesn’t have 100% reproduce you may use such command in a loop to catch crash.

cp /rom/etc/config/firewall /etc/config/firewall && ubus call uci set '{"config":"firewall","section":"cfg02dc81","type":"zone","values":{"network":"","name":"iptv"}}}' && ps | grep rpcd

Technical cause
If we set any value to list in UCI via rpcd it deletes the list first and then sets the provided value.
Since we provide an empty string it tries to delete this section once more. As it is already deleted it should be ignored.
However, due to the fact that flags in ptr were not cleared after calling to uci_delete, uci_set “think” that option exists and try to delete it.
Since the pointer to option is null uci_expand_ptr returns the pointer to section instead of an option. So that local section representation will be freed.
Any of the next operations on the same section may crash rpcd, because we get into use-after-free situation.

Proposed fix
Add cleaning of uci_ptr flag for the list after calling to uci_delete in rpc_uci_merge_set.
Please see attached patch.

Also, consider clearing ptr flags in uci_delete along with setting ptr to null for the local representation of section/option.


23.12.20203526Base systemBug ReportVery LowLowdnsmasq AAAA filtering supportTrunkUnconfirmed Task Description

In the IPv4 system, OpenWRT dnsmasq may return AAAA (IPv6) records that degrades the resolution speed. I’ve made the patch (based on someone else code) for the dnsmasq service that resolves the issue. It introduced the new “option filter_aaaa” for the config file, that effectively filters out any IPv6 records forwarding etc.

Kindly ask to integrate it to the base repo. Optionally - make this available via the menuconfig option.

13.12.20203514Base systemBug ReportVery LowMediumSamba 3.6 makefile missing nls.mk includeopenwrt-19.07Unconfirmed Task Description

Prerequisites:
Device problem occurs on: Any
Software versions: OpenWrt 19.07.4, Samba 3.6.25

Steps to reproduce:
Build samba36-server build log collected (BUILD_LOG=1)
Check samba build log for iconv

expected:
libiconv has been successfully located and linked against.

actual:
libiconv hasn’t been found

configure: WARNING: Sufficient support for iconv function was not found.
    Install libiconv from http://freshmeat.net/projects/libiconv/ for better charset compatibility!

The problem is in samba36 Makefile, nls.mk include is not added

11.12.20203512Base systemBug ReportVery LowLowwifi sta cannot re-connect if upstream wifi change pass...TrunkUnconfirmed Task Description

mt76x8

first I change password in upstream wifi (ssid=X-WRT_9B84)
and my mt76x8 device lost wifi connection
then I change the password back again
expecting the mt76x8 re-connect to upstream wifi
but not

the mt76x8 logread -f:

Fri Dec 11 19:22:40 2020 kern.info kernel: [92023.412533] wlan0: deauthenticated from xx:xx:xx:e1:9b:86 (Reason: 3=DEAUTH_LEAVING)
Fri Dec 11 19:22:40 2020 daemon.notice netifd: Network device ‘wlan0’ link is down
Fri Dec 11 19:22:40 2020 daemon.notice netifd: Interface ‘wwan’ has link connectivity loss
Fri Dec 11 19:22:40 2020 daemon.notice wpa_supplicant[10521]: wlan0: CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:e1:9b:86 reason=3
Fri Dec 11 19:22:40 2020 daemon.notice netifd: wwan (11438): udhcpc: received SIGTERM
Fri Dec 11 19:22:40 2020 daemon.notice netifd: wwan (11438): udhcpc: unicasting a release of 192.168.15.145 to 192.168.15.1
Fri Dec 11 19:22:40 2020 daemon.notice netifd: wwan (11438): udhcpc: sending release
Fri Dec 11 19:22:40 2020 daemon.notice netifd: wwan (11438): udhcpc: entering released state
Fri Dec 11 19:22:40 2020 daemon.notice netifd: wwan (11438): Command failed: Permission denied
Fri Dec 11 19:22:40 2020 daemon.notice netifd: Interface ‘wwan’ is now down
Fri Dec 11 19:22:40 2020 daemon.debug dnsmasq[11344]: stopped listening on wlan0(#20): 192.168.15.145 port 53
Fri Dec 11 19:22:40 2020 daemon.notice netifd: Interface ‘wwan’ is disabled
Fri Dec 11 19:22:40 2020 daemon.notice netifd: Interface ‘wwan’ is enabled
Fri Dec 11 19:22:40 2020 daemon.info dnsmasq[11344]: reading /tmp/resolv.conf.d/resolv.conf.auto
Fri Dec 11 19:22:40 2020 daemon.info dnsmasq[11344]: using only locally-known addresses for domain test
Fri Dec 11 19:22:40 2020 daemon.info dnsmasq[11344]: using only locally-known addresses for domain onion
Fri Dec 11 19:22:40 2020 daemon.info dnsmasq[11344]: using only locally-known addresses for domain localhost
Fri Dec 11 19:22:40 2020 daemon.info dnsmasq[11344]: using only locally-known addresses for domain local
Fri Dec 11 19:22:40 2020 daemon.info dnsmasq[11344]: using only locally-known addresses for domain invalid
Fri Dec 11 19:22:40 2020 daemon.info dnsmasq[11344]: using only locally-known addresses for domain bind
Fri Dec 11 19:22:40 2020 daemon.info dnsmasq[11344]: using only locally-known addresses for domain lan
Fri Dec 11 19:22:40 2020 daemon.info dnsmasq[11344]: using nameserver fe80::2efd:a1ff:fe03:9d91%eth0.1#53
Fri Dec 11 19:22:40 2020 daemon.info dnsmasq[11344]: using nameserver 192.168.16.1#53
Fri Dec 11 19:22:41 2020 daemon.notice netifd: Network device ‘wlan0-1’ link is down
Fri Dec 11 19:22:41 2020 daemon.notice netifd: Interface ‘lanap’ has link connectivity loss
Fri Dec 11 19:22:46 2020 daemon.notice netifd: Network device ‘wlan0-1’ link is up
Fri Dec 11 19:22:46 2020 daemon.notice netifd: Interface ‘lanap’ has link connectivity
Fri Dec 11 19:24:25 2020 daemon.notice wpa_supplicant[10521]: wlan0: SME: Trying to authenticate with xx:xx:xx:e1:9b:86 (SSID=’X-WRT_9B84’ freq=2462 MHz)
Fri Dec 11 19:24:25 2020 daemon.notice wpa_supplicant[10521]: wlan0: SME: Authentication request to the driver failed
Fri Dec 11 19:24:25 2020 kern.info kernel: [92127.874903] wlan0: authenticate with xx:xx:xx:e1:9b:86
Fri Dec 11 19:24:25 2020 daemon.notice netifd: Network device ‘wlan0-1’ link is down
Fri Dec 11 19:24:25 2020 daemon.notice netifd: Interface ‘lanap’ has link connectivity loss
Fri Dec 11 19:24:26 2020 daemon.notice wpa_supplicant[10521]: wlan0: SME: Trying to authenticate with xx:xx:xx:e1:9b:86 (SSID=’X-WRT_9B84’ freq=2462 MHz)
Fri Dec 11 19:24:26 2020 kern.info kernel: [92129.339747] wlan0: authenticate with xx:xx:xx:e1:9b:86
Fri Dec 11 19:24:26 2020 kern.info kernel: [92129.369148] wlan0: send auth to xx:xx:xx:e1:9b:86 (try 1/3)
Fri Dec 11 19:24:26 2020 daemon.notice wpa_supplicant[10521]: wlan0: Trying to associate with xx:xx:xx:e1:9b:86 (SSID=’X-WRT_9B84’ freq=2462 MHz)
Fri Dec 11 19:24:26 2020 kern.info kernel: [92129.387006] wlan0: authenticated
Fri Dec 11 19:24:26 2020 kern.info kernel: [92129.397573] wlan0: associate with xx:xx:xx:e1:9b:86 (try 1/3)
Fri Dec 11 19:24:26 2020 kern.info kernel: [92129.417213] wlan0: RX AssocResp from xx:xx:xx:e1:9b:86 (capab=0×431 status=0 aid=1)
Fri Dec 11 19:24:26 2020 kern.info kernel: [92129.432615] wlan0: associated
Fri Dec 11 19:24:26 2020 daemon.notice netifd: Network device ‘wlan0’ link is up
Fri Dec 11 19:24:26 2020 daemon.notice netifd: Interface ‘wwan’ has link connectivity
Fri Dec 11 19:24:26 2020 daemon.notice netifd: Interface ‘wwan’ is setting up now
Fri Dec 11 19:24:26 2020 daemon.notice wpa_supplicant[10521]: wlan0: Associated with xx:xx:xx:e1:9b:86
Fri Dec 11 19:24:26 2020 daemon.notice wpa_supplicant[10521]: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
Fri Dec 11 19:24:26 2020 daemon.notice netifd: wwan (11770): udhcpc: started, v1.31.1
Fri Dec 11 19:24:26 2020 daemon.notice netifd: wwan (11770): udhcpc: sending discover
Fri Dec 11 19:24:29 2020 daemon.notice netifd: wwan (11770): udhcpc: sending discover
Fri Dec 11 19:24:30 2020 daemon.notice netifd: Network device ‘wlan0’ link is down
Fri Dec 11 19:24:30 2020 daemon.notice netifd: Interface ‘wwan’ has link connectivity loss
Fri Dec 11 19:24:30 2020 kern.info kernel: [92133.436716] wlan0: deauthenticated from xx:xx:xx:e1:9b:86 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
Fri Dec 11 19:24:30 2020 daemon.notice wpa_supplicant[10521]: wlan0: CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:e1:9b:86 reason=15
Fri Dec 11 19:24:30 2020 daemon.notice wpa_supplicant[10521]: wlan0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
Fri Dec 11 19:24:30 2020 daemon.notice wpa_supplicant[10521]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid=”X-WRT_9B84” auth_failures=1 duration=10 reason=WRONG_KEY
Fri Dec 11 19:24:30 2020 daemon.notice netifd: wwan (11770): udhcpc: received SIGTERM
Fri Dec 11 19:24:30 2020 daemon.notice netifd: wwan (11770): udhcpc: entering released state
Fri Dec 11 19:24:30 2020 daemon.notice netifd: wwan (11770): Command failed: Permission denied
Fri Dec 11 19:24:30 2020 daemon.notice netifd: Interface ‘wwan’ is now down
Fri Dec 11 19:24:30 2020 daemon.notice netifd: Interface ‘wwan’ is disabled
Fri Dec 11 19:24:30 2020 daemon.notice netifd: Interface ‘wwan’ is enabled
Fri Dec 11 19:24:34 2020 daemon.notice netifd: Network device ‘wlan0-1’ link is up
Fri Dec 11 19:24:34 2020 daemon.notice netifd: Interface ‘lanap’ has link connectivity
Fri Dec 11 19:24:41 2020 daemon.notice wpa_supplicant[10521]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid=”X-WRT_9B84” Fri Dec 11 19:24:41 2020 daemon.notice wpa_supplicant[10521]: wlan0: SME: Trying to authenticate with xx:xx:xx:e1:9b:86 (SSID=’X-WRT_9B84’ freq=2462 MHz)
Fri Dec 11 19:24:41 2020 daemon.notice wpa_supplicant[10521]: wlan0: SME: Authentication request to the driver failed
Fri Dec 11 19:24:41 2020 kern.info kernel: [92144.477289] wlan0: authenticate with xx:xx:xx:e1:9b:86
Fri Dec 11 19:24:41 2020 daemon.notice wpa_supplicant[10521]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid=”X-WRT_9B84” auth_failures=2 duration=20 reason=CONN_FAILED
Fri Dec 11 19:24:41 2020 daemon.notice netifd: Network device ‘wlan0-1’ link is down
Fri Dec 11 19:24:41 2020 daemon.notice netifd: Interface ‘lanap’ has link connectivity loss
Fri Dec 11 19:24:46 2020 daemon.notice netifd: Network device ‘wlan0-1’ link is up
Fri Dec 11 19:24:46 2020 daemon.notice netifd: Interface ‘lanap’ has link connectivity
Fri Dec 11 19:25:02 2020 daemon.notice wpa_supplicant[10521]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid=”X-WRT_9B84” Fri Dec 11 19:25:02 2020 daemon.notice wpa_supplicant[10521]: wlan0: SME: Trying to authenticate with xx:xx:xx:e1:9b:86 (SSID=’X-WRT_9B84’ freq=2462 MHz)
Fri Dec 11 19:25:02 2020 daemon.notice wpa_supplicant[10521]: wlan0: SME: Authentication request to the driver failed
Fri Dec 11 19:25:02 2020 daemon.notice wpa_supplicant[10521]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid=”X-WRT_9B84” auth_failures=3 duration=30 reason=CONN_FAILED
Fri Dec 11 19:25:02 2020 kern.info kernel: [92165.400213] wlan0: authenticate with xx:xx:xx:e1:9b:86
Fri Dec 11 19:25:02 2020 daemon.notice netifd: Network device ‘wlan0-1’ link is down
Fri Dec 11 19:25:02 2020 daemon.notice netifd: Interface ‘lanap’ has link connectivity loss
Fri Dec 11 19:25:04 2020 daemon.notice netifd: Network device ‘wlan0-1’ link is up
Fri Dec 11 19:25:04 2020 daemon.notice netifd: Interface ‘lanap’ has link connectivity

09.12.20203500Base systemBug ReportVery LowLowumbim: problem registering to network with Huawei K5150...TrunkUnconfirmed Task Description

Hi!

The problem is that the card registers to network in a weird way and thus the mbim.sh script stops and doesn’t continue attaching to network, ...

The problem has been detected on a Huawei EchoLife HG556a (version C) but seems a general problem.

Also, the problem was with a ID 12d1:1f16 Huawei Technologies Co., Ltd. K5150 LTE modem but I believe that it can happens on other mbim devices as well.

I believe the problem is more related to the fact that the SIM is from a virtual movile operator which is then using the network from the real operator: Orange, but we didn’t test any other SIMs, so we don’t know if this is more general, if needed we could try to get some other SIMs for testing.

The problem is that when we do the network registration with umbim it gives an error, so it stops there, so we tried to remove that check like this:

— mbim.sh.orig 2020-12-04 15:11:47.000000000 +0100
+++ mbim.sh 2020-12-03 16:30:34.000000000 +0100
@@ -99,11 +99,7 @@

      tid=$((tid + 1))
      echo "mbim[$$]" "Register with network"

- umbim $DBG -n -t $tid -d $device registration || {
- echo “mbim[$$]” “Subscriber registration failed” - proto_notify_error “$interface” NO_REGISTRATION
- return 1
- }
+ umbim $DBG -n -t $tid -d $device registration

      tid=$((tid + 1))
      echo "mbim[$$]" "Attach to network"

So that it would continue no matter how the network registration felt, and it worked giving us this log:

Wed Dec 9 11:41:27 2020 daemon.notice netifd: wwan (1405): wwan[1405] Using proto:wwan device:/dev/cdc-wdm0 iface:wwan0 desc:Huawei K5150 composite
Wed Dec 9 11:41:27 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): mbim[1405] Reading capabilities
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): devicetype: 0002 - removable
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): cellularclass: 0001
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): voiceclass: 0001 - no-voice
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): simclass: 0002
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): dataclass: 8000003F
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): smscaps: 0003
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): controlcaps: 0001
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): maxsessions: 0003
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): deviceid: 860112021925542
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): firmwareinfo: V8.1
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): hardwareinfo: CH1K5150M
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): mbim[1405] Checking pin
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): Pin Unlocked
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): mbim[1405] Checking subscriber
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): readystate: 0001 - initialized
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): simiccid: 8934250220007795837F
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): subscriberid: 214035090779583
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): mbim[1405] Register with network
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): nwerror: 0000 - unknown
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): registerstate: 0004 - roaming
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): registermode: 0001 - automatic
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): availabledataclasses: 0020 - lte
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): currentcellularclass: 0001 - gsm
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): provider_id: 21403
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): provider_name: Orange
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): roamingtext: (null)
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): mbim[1405] Attach to network
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): nwerror: 0000 - unknown
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): packetservicestate: 0002 - attached
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): uplinkspeed: 0
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): downlinkspeed: 0
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): mbim[1405] Connect to network
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): sessionid: 0
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): activationstate: 0001 - activated
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): voicecallstate: 0000 - none
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): nwerror: 0000 - unknown
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): iptype: 0003 - ipv4v6
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): mbim[1405] Connected, starting DHCP

Network connection works ok like this and we can access Inet without any problem.

So... either umbim is not exiting with the right exit code, maybe because of that unknown status it says there, or if the exit code is ok, then we should somehow do farder tests and continue like we did, as the connection is good anyway.

This was also tested using latest available snapshot builds with the same results, we have gone back to stable (these logs are from 19.07.4) as the snapshot build was having trouble with the wifi on this router, but the umbim problem and the solution we applied worked the same on snapshot as it does on stable.

If you need any other info, just ask.

Regards.

09.12.20203499Base systemBug ReportVery LowLow[netifd] no way to monitor the real state of a connecti...TrunkUnconfirmed Task Description

The current ModemManager integration in netifd is not fully operational right now, and usually requires an additional management script on top of it to properly reconnect the modems under certain scenarios.

The simplest and most common use case is the following:
* The network interface configured for “modemmanager” protocol is ifup-ed.
* netifd runs the connection start procedure in the protocol handler and the modem gets connected.
* Some time passes, and the network operator decides to disconnect the connection (network-initiated disconnection).
* ModemManager detects the disconnection, reports the bearer objects a “disconnected” and the modem back to only “registered”.
* netifd still thinks the interface is up, and reports it as up everywhere.

See e.g. https://github.com/openwrt/packages/issues/14096

What would be the best way to solve this issue?

Is there currently any way to extend the protocol handler in a way that allows some polling inside netifd to ensure the interface is still up? Would that be a big change? Any other solution suggested?

 


08.12.20203496Base systemBug ReportVery LowMediumtc -s qdisc crashes when a RED queue is in use:TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
all
- Software versions of OpenWrt/LEDE release, packages, etc.

current trunk and 19.x.x series

- Steps to reproduce

 

attach red qdisc to an interface, then run `tc -s qdisc` and see segfault

```
ip link add type veth
tc qdisc add dev veth0 root red limit 150000 min 5000 max 10000 avpkt 500 bandwidth 1000kbit probability 1.0
tc -s qdisc
qdisc noqueue 0: dev lo root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 0: dev eth0 root refcnt 2 limit 10240p flows 1024 quantum 1514 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
Sent 4673809 bytes 6135 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0

maxpacket 1414 drop_overlimit 0 new_flow_count 16 ecn_mark 0
new_flows_len 0 old_flows_len 0

qdisc noqueue 0: dev br-lan root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc hfsc 1: dev eth0.1 root refcnt 2 default 3
Sent 762564 bytes 569 pkt (dropped 1, overlimits 7 requeues 0)
backlog 0b 0p requeues 0
Segmentation fault
root@OpenWrt:~#
```

08.12.20203495Base systemBug ReportVery LowMediumkmod-sched should include additional qdiscs: qfq, drr, ...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

all devices

- Software versions of OpenWrt/LEDE release, packages, etc.

current release 19.x.x and trunk

- Steps to reproduce

 

install kmod-sched see that it does not have a full set of qdiscs which reduces the utility of targeted high-interactivity scheduling designs such as:

https://raw.githubusercontent.com/dlakelan/routerperf/master/SimpleHFSCgamerscript.sh

The most important ones in my mind are:

qfq: an important weighted queue discipline which lets you balance bandwidth within another class, so it’s useful to place below a HFSC class to balance the users within the class in a purposefully weighted *unfair* way. it’s more efficient than drr so if a choice needs to be made between the two for size reasons, qfq is preferable

drr: does similar thing to above but less computationally efficient... probably not needed if qfq can be provided

sfb: this can be a better qdisc if you are trying to do fair queueing on UDP streams which do not respond to signalling the way TCP does, this will tend to delete packets from the “heavy” streams.

Overall it’s important for good custom queueing to have all of the following qdiscs in my opinion:

hfsc, red, cake, qfq, bfifo, pfifo, sfb

08.12.20203493Base systemBug ReportVery LowLowhotplug firmware scripts run twice for each device, for...TrunkUnconfirmed Task Description

Test device: ath79 mikrotik wap-g on snapshot r15165-66d12ce667

Reproduce:
Modify /etc/hotplug.d/firmware/*, or called settings to log to a file:

root@OpenWrt:~# grep -r hotplug.log /etc/hotplug.d/firmware/
/etc/hotplug.d/firmware/10-ath9k-eeprom:        echo "$(date +%s): 10-ath9k-eeprom $ACTION" >> /tmp/hotplug.log
/etc/hotplug.d/firmware/11-ath10k-caldata:              echo "$(date +%s): 11-ath10k-eeprom $ACTION" >> /tmp/hotplug.log
root@OpenWrt:~# grep -r hotplug.log /lib/functions/caldata.sh 
        echo "$(date +%s): caldata sysfsload_from_file $ACTION" >> /tmp/hotplug.log
root@OpenWrt:~# cat /tmp/hotplug.log 
1607349214: caldata sysfsload_from_file add
1607349214: 11-ath10k-eeprom add
1607349214: caldata sysfsload_from_file remove
1607349214: 11-ath10k-eeprom remove
1607349218: 10-ath9k-eeprom add
1607349218: caldata sysfsload_from_file add
1607349219: 10-ath9k-eeprom remove
1607349219: caldata sysfsload_from_file remove
08.12.20203492Base systemBug ReportVery LowMediumsysupgrade from CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y los...TrunkUnconfirmed Task Description

Test device: ath79 mikrotik wap-g on snapshot r15165-66d12ce667

Reproduce

  1. sysupgrade
  2. change settings
  3. sysupgrade: settings lost

without CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y

  • settings are found and restored on sysupgrade (after the initial 4K_SECTORS=y to 4K_SECTORS=n upgrade)
  • lose write access for routerboot soft_config (which explicitly requires CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y, as Openwrt partial erase target/linux/generic/pending-5.4/411-mtd-partial_eraseblock_write.patch had a merge error which was rendering devices unbootable at the time.)
  • faster sysupgrade erase/write time: 45s → 26s

https://github.com/openwrt/openwrt/pull/3094#issuecomment-667557585 https://github.com/openwrt/openwrt/pull/3037#issuecomment-669332233

target/linux/generic/pending-5.4/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch stopped functioning with linux 4.19
Now all partitions have a 4K erase block if CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
This causes mount_root to fail to find upgrade settings where the image is expecting 64K blocksize.

grep --binary-files=text -E 'overlay|upgrade|reboot|mount' ath79_mikrotik_wap-g_sysupgrade_loses_settings 
[    8.892059] mount_root: switching to jffs2 overlay
[    8.899647] overlayfs: upper fs does not support tmpfile.
Mon Dec  7 13:25:31 UTC 2020 upgrade: Sending TERM to remaining processes ... logd hostapd wpa_supplicant netifd odhcpd ntpd dnsmasq ubusd askfirst urngd
Mon Dec  7 13:25:34 UTC 2020 upgrade: Sending KILL to remaining processes ...
Mon Dec  7 13:25:35 UTC 2020 upgrade: Switching to ramdisk...
Mon Dec  7 13:25:38 UTC 2020 upgrade: Performing system upgrade...
Appending jffs2 data from /tmp/sysupgrade.tgz to firmware..
Mon Dec  7 13:26:21 UTC 2020 upgrade: Upgrade completed
Mon Dec  7 13:26:22 UTC 2020 upgrade: Rebooting system...
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[  175.677595] reboot: Restarting system
[    8.611437] mount_root: no usable overlay filesystem found, using tmpfs overlay
[  117.356605] overlayfs: upper fs does not support tmpfile.

./package/base-files/files/lib/preinit/80_mount_root:do_mount_root() {

do_mount_root() {
        mount_root
        boot_run_hook preinit_mount_root
        [ -f /sysupgrade.tgz ] && {
                echo "- config restore -"
                cp /etc/passwd /etc/group /etc/shadow /tmp
                cd /
                tar xzf /sysupgrade.tgz
                missing_lines /tmp/passwd /etc/passwd >> /etc/passwd
                missing_lines /tmp/group /etc/group >> /etc/group
                missing_lines /tmp/shadow /etc/shadow >> /etc/shadow
                rm /tmp/passwd /tmp/group /tmp/shadow
                # Prevent configuration corruption on a power loss
                sync
        }
}

https://git.openwrt.org/?p=project/fstools.git;a=blob;f=mount_root.c;

  61         case FS_NONE:
  62                 ULOG_WARN("no usable overlay filesystem found, using tmpfs overlay\n");
  63                 return ramoverlay();
30.11.20203482Base systemBug ReportVery LowLowWNDR3700 - config changes do not survive reboot after '...openwrt-19.07Unconfirmed Task Description

Issue occurs on WNDR3700 v1
Image used openwrt-19.07.4-ath79-generic-netgear_wndr3700-squashfs-sysupgrade.bin

Steps:

1, Flash the above sysupgrade image.
2, Configure luci as required, all settings are saved as expected and survive any number of reboots as expected.
3, Use luci System/Backup Flash Firmware/Reset to Defaults (Perform Reset) to clear the current configuration.
4, Post reset any changes applied to config/settings within luci no longer survive a reboot. The luci configuration returns to the default post-flash position after each reboot.

Issue is reproducible.

Workaround is to reflash and avoid using the reset functionality.

27.11.20203479Base systemBug ReportVery LowLowpadlock-aes and padlock-sha 2 modules could not be prob...TrunkUnconfirmed Task Description

- x86_64
- master latest

 

Hello all, Why not load the following two modules?

```
[ 6.997819] kmodloader: 2 modules could not be probed
[ 7.001255] kmodloader: - padlock-aes - 0
[ 7.004138] kmodloader: - padlock-sha - 0
```

27.11.20203478Base systemBug ReportVery LowLowfw3: multiple weekdays are not parsed correctlyTrunkUnconfirmed Task Description

Observed on a R7800 running a master snapshot build.

To reproduce, create and apply a firewall traffic rule in Luci (https://openwrt.lan/cgi-bin/luci/admin/network/firewall/rules) with multiple weekdays selected under `Time Restrictions`. It will create an iptables rule with only the first weekday set.

Patch linked.

26.11.20203474Base systemBug ReportVery LowMedium802.11r - Fast transitioning not working for 2nd SSIDopenwrt-19.07Unconfirmed Task Description

Description:

I have 3 WIFI access points (2x Netgear WNDR4300, 1x Netgear WNDR3700v2) running 19.07.4 r11208-ce6496d796. Each of those APs has a 2.4 and a 5 GHz band. For each of the 2 radios I have defined 2 SSIDs: Home-net and Guest-net.

So each AP has a total of 4 WIFI interfaces:

  • Home-net @ 2.4 GHz
  • Home-net @ 5 GHz
  • Guest-net @ 2.4 GHz
  • Guest-net @ 5 GHz

All the WIFI interfaces of the same SSID are bridged together into a separate VLAN.

802.11r is configured identically on all 4 WIFI interfaces. I'm using a very simple FT config that generates the keys locally based on the pre-shared key and I let most of the required settings to be generated automatically.

Now, my problem is that fast-transitioning works for the Home-net, but not for the Guest-net.
Home-net roaming is really working great and as expected. I can fast-transition between the radio cells of the same AP (2.4GHz ⇔ 5GHz) as well as fast-transition between the cells of the different APs.

However fast-transitioning of the Guest-net on the other hand is not working at all. Even though it is essentially using the same configuration as the Home-net.
I already tried to provide explicit values for some of the relevant, generated 802.11r settings like NASID and Mobility-Domain, but that does not seem to make any difference.
I also did a test to see what happens, if I delete the 2 working Home-net interfaces. Well, once they are deleted, fast transitioning via the 2 remaining Guest-net interfaces started to work. I could easily roam between the 2.4 and 5 GHz networks of the modified AP.
Given the fact that the previously defunct Guest-net network becomes functional tells me that my network configuration and my 802.11r configuration are not the problem here.

How to reproduce:

precondition: a dual band AP with 19.07.04
1. set up 2 wifi networks for each radio
2. enable hostapd debug mode for both radios
3. connect with a mobile device to the first SSID and try to roam between the bands
4. check the systemlog for FT messages
result: fast transitioning is working for the first SSID
5. connect with a mobile device to the second SSID and try to roam between the bands
6. check the systemlog for FT messages
result: fast transitioning is not working for the second SSID
expected result: fast transitioning is working for both/all SSIDs.

wireless config

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11g'
	option path 'platform/ar934x_wmac'
	option country 'DE'
	option legacy_rates '0'
	option htmode 'HT20'
	option log_level '1'
	option channel '11'
	option txpower '17'

config wifi-device 'radio1'
	option type 'mac80211'
	option hwmode '11a'
	option path 'pci0000:00/0000:00:00.0'
	option country 'DE'
	option legacy_rates '0'
	option htmode 'HT40'
	option log_level '1'
	option channel '36'    

## home-net 2.4 GHz
config wifi-iface 'default_radio0'
	option device 'radio0'
	option mode 'ap'
	option network 'WIFI-HOME'
	option encryption 'psk2+ccmp'
	option key '***redacted***'
	option ssid 'home-net'
	option macfilter 'allow'
	list maclist '***redacted***'
	option wpa_disable_eapol_key_retries '1'
	option ieee80211r '1'
	option ft_psk_generate_local '1'
	option ft_over_ds '0'
	option max_inactivity '30'

## home-net 5 GHz
config wifi-iface 'default_radio1'
	option device 'radio1'
	option mode 'ap'
	option network 'WIFI-HOME'
	option encryption 'psk2+ccmp'
	option key '***redacted***'
	option ssid 'home-net'
	option macfilter 'allow'
	list maclist '***redacted***'
	option wpa_disable_eapol_key_retries '1'
	option ieee80211r '1'
	option ft_psk_generate_local '1'
	option ft_over_ds '0'
	option max_inactivity '30'

## guest-net 2.4 GHz
config wifi-iface 'wifinet2'
	option device 'radio0'
	option mode 'ap'
	option network 'WIFI-GUEST'
	option encryption 'psk2+ccmp'
	option key '***redacted***'
	option ssid 'guest-net'
	option wpa_disable_eapol_key_retries '1'
	option ieee80211r '1'
	option ft_psk_generate_local '1'
	option ft_over_ds '0'
	option max_inactivity '30'

## guest-net 5 GHz
config wifi-iface 'wifinet3'
	option device 'radio1'
	option mode 'ap'
	option network 'WIFI-GUEST'
	option encryption 'psk2+ccmp'
	option key '***redacted***'
	option ssid 'guest-net'
	option wpa_disable_eapol_key_retries '1'
	option ieee80211r '1'
	option ft_psk_generate_local '1'
	option ft_over_ds '0'
	option max_inactivity '30'
25.11.20203473Base systemBug ReportVery LowMediumNo wireless in snapshots build for Arcadyan VGV7519 (Ex...AllUnconfirmed Task Description

After a clean flash of arcadyan_vgv7519-nor-squashfs-sysupgrade.bin (from snapshots), wireless is not available. (I also tried a flash with config saved from 19.07.4, to no avail.)

dmesg|grep -i phy
[    0.734676] libphy: Fixed MDIO Bus: probed
[    0.909272] libphy: lantiq,xrx200-mdio: probed
[    0.922043] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:00: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:00, irq=POLL)
[    0.937033] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:01: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:01, irq=POLL)
[    0.952413] Intel XWAY PHY11G (xRX v1.2 integrated) 0:11: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:11, irq=POLL)
[    0.966123] Intel XWAY PHY11G (xRX v1.2 integrated) 0:13: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:13, irq=POLL)
[    0.979874] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:05: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:05, irq=POLL)
logread|grep -i phy (in the case of the saved config files attempt)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.791228] 8021q: 802.1Q VLAN Support v1.8
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.910188] libphy: lantiq,xrx200-mdio: probed
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.923156] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:00: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:00, irq=POLL)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.938044] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:01: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:01, irq=POLL)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.953528] Intel XWAY PHY11G (xRX v1.2 integrated) 0:11: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:11, irq=POLL)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.967276] Intel XWAY PHY11G (xRX v1.2 integrated) 0:13: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:13, irq=POLL)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.980984] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:05: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:05, irq=POLL)
Mon Nov 23 03:14:04 2020 daemon.notice procd: /etc/rc.d/S96led: Skipping trigger 'phy0radio' for led 'wifi' due to missing kernel module
Mon Nov 23 03:14:10 2020 daemon.notice netifd: radio0 (1813): Could not find PHY for device 'radio0'
iw dev
Nothing.

Complete logread:

Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.000000] Linux version 5.4.77 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r15003-b19a684f46)) #0 SMP Mon Nov 23 03:13:46 2020
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] SoC: xRX200 rev 1.2
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] printk: bootconsole [early0] enabled
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] MIPS: machine is KPN Experiabox V8
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] User-defined physical RAM map overwrite
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] Detected 1 available secondary CPU(s)
Mon Nov 23 03:13:54 2020 kern.warn kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Mon Nov 23 03:13:54 2020 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] Zone ranges:
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003dfffff]
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] Movable zone start for each node
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] Early memory node ranges
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003dfffff]
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003dfffff]
Mon Nov 23 03:13:54 2020 kern.debug kernel: [    0.000000] On node 0 totalpages: 15872
Mon Nov 23 03:13:54 2020 kern.debug kernel: [    0.000000]   Normal zone: 140 pages used for memmap
Mon Nov 23 03:13:54 2020 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Mon Nov 23 03:13:54 2020 kern.debug kernel: [    0.000000]   Normal zone: 15872 pages, LIFO batch:3
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] percpu: Embedded 14 pages/cpu s26256 r8192 d22896 u57344
Mon Nov 23 03:13:54 2020 kern.debug kernel: [    0.000000] pcpu-alloc: s26256 r8192 d22896 u57344 alloc=14*4096
Mon Nov 23 03:13:54 2020 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 15732
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.000000] Kernel command line: console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] Writing ErrCtl register=000542c1
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] Readback ErrCtl register=000542c1
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] Memory: 53308K/63488K available (6116K kernel code, 220K rwdata, 1568K rodata, 1232K init, 223K bss, 10180K reserved, 0K cma-reserved)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] NR_IRQS: 256
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x33c/0x554 with crng_init=0
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] CPU Clock: 500MHz
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.000010] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.007899] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.045978] pid_max: default: 32768 minimum: 301
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.050906] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.058106] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.069511] rcu: Hierarchical SRCU implementation.
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.075117] smp: Bringing up secondary CPUs ...
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.079577] smp: Brought up 1 node, 1 CPU
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.090218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.099887] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.106941] pinctrl core: initialized pinctrl subsystem
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.115960] NET: Registered protocol family 16
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.130227] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.141032] pinctrl-xway 1e100b10.pinmux: Init done
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.147089] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.157889] PCI host bridge /fpi@10000000/pci@e105400 ranges:
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.163582]  MEM 0x0000000018000000..0x0000000019ffffff
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.168824]   IO 0x000000001ae00000..0x000000001affffff
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.238851] gpio-stp-xway 1e100bb0.stp: Init done
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.244995] usbcore: registered new interface driver usbfs
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.250533] usbcore: registered new interface driver hub
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.255889] usbcore: registered new device driver usb
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.261350] PCI host bridge to bus 0000:00
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.265381] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.272286] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.279228] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.286082] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.296506] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Mon Nov 23 03:13:54 2020 kern.warn kernel: [    0.303132] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.323141] clocksource: Switched to clocksource MIPS
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.329824] NET: Registered protocol family 2
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.335424] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.343770] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.351439] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.358543] TCP: Hash tables configured (established 1024 bind 1024)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.365154] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.371648] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.379109] NET: Registered protocol family 1
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.383420] PCI: CLS 0 bytes, default 32
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.391758] gptu: totally 6 16-bit timers/counters
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.396700] gptu: misc_register on minor 63
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.400857] gptu: succeeded to request irq 126
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.405346] gptu: succeeded to request irq 127
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.409875] gptu: succeeded to request irq 128
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.414393] gptu: succeeded to request irq 129
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.418942] gptu: succeeded to request irq 130
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.423391] gptu: succeeded to request irq 131
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.431143] lantiq,vmmc 1f107000.vmmc: requested GPIO 465
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.436499] lantiq,vmmc 1f107000.vmmc: requested GPIO 493
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.441958] lantiq,vmmc 1f107000.vmmc: requested GPIO 492
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.447385] lantiq,vmmc 1f107000.vmmc: reserved 1MB at 0x(ptrval)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.461342] workingset: timestamp_bits=14 max_order=14 bucket_order=0
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.477733] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.483484] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.517676] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.533412] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.542344] printk: console [ttyLTQ0] enabled
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.551062] printk: bootconsole [early0] disabled
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.566445] lantiq nor flash device: 00800000 at 10000000
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.570694] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.580041] Amd/Fujitsu Extended Query Table at 0x0040
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.585164]   Amd/Fujitsu Extended Query version 1.1.
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.590192] number of CFI chips: 1
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.593591] lantiq nor flash device: 00800000 at 14800000
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.599123] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.608579] Amd/Fujitsu Extended Query Table at 0x0040
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.613712]   Amd/Fujitsu Extended Query version 1.1.
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.618739] number of CFI chips: 1
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.622132] Concatenating MTD devices:
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.625873] (0): "ltq_nor"
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.628570] (1): "ltq_nor"
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.631267] into device "10000000.flash"
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.635251] 4 fixed-partitions partitions found on MTD device 10000000.flash
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.642246] Creating 4 MTD partitions on "10000000.flash":
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.647738] 0x000000040000-0x000000050000 : "board_config"
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.654630] 0x000000000000-0x000000040000 : "uboot"
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.659661] 0x000000060000-0x000000070000 : "u-boot-env"
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.665055] 0x000000080000-0x000001000000 : "firmware"
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.700596] 2 uimage-fw partitions found on MTD device firmware
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.705179] 0x000000080000-0x0000002f5827 : "kernel"
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.711562] 0x0000002f5827-0x000001000000 : "rootfs"
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.716506] mtd: device 5 (rootfs) set to be root filesystem
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.720862] 1 squashfs-split partitions found on MTD device rootfs
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    0.726984] 0x0000006e0000-0x000001000000 : "rootfs_data"
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.735315] libphy: Fixed MDIO Bus: probed
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.745628] NET: Registered protocol family 10
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.771547] Segment Routing with IPv6
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.773876] NET: Registered protocol family 17
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.778381] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.791228] 8021q: 802.1Q VLAN Support v1.8
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.910188] libphy: lantiq,xrx200-mdio: probed
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.923156] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:00: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:00, irq=POLL)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.938044] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:01: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:01, irq=POLL)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.953528] Intel XWAY PHY11G (xRX v1.2 integrated) 0:11: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:11, irq=POLL)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.967276] Intel XWAY PHY11G (xRX v1.2 integrated) 0:13: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:13, irq=POLL)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    0.980984] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:05: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:05, irq=POLL)
Mon Nov 23 03:13:54 2020 kern.info kernel: [    1.005124] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Mon Nov 23 03:13:54 2020 kern.info kernel: [    1.015063] Freeing unused kernel memory: 1232K
Mon Nov 23 03:13:54 2020 kern.warn kernel: [    1.018148] This architecture does not have kernel memory protection.
Mon Nov 23 03:13:54 2020 kern.info kernel: [    1.024640] Run /sbin/init as init process
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    1.207160] random: fast init done
Mon Nov 23 03:13:54 2020 user.info kernel: [    1.841692] init: Console is alive
Mon Nov 23 03:13:54 2020 user.info kernel: [    1.844188] init: - watchdog -
Mon Nov 23 03:13:54 2020 user.info kernel: [    3.361918] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Mon Nov 23 03:13:54 2020 kern.warn kernel: [    3.509736] dwc2 1e101000.usb: 1e101000.usb supply vusb_d not found, using dummy regulator
Mon Nov 23 03:13:54 2020 kern.warn kernel: [    3.516849] dwc2 1e101000.usb: 1e101000.usb supply vusb_a not found, using dummy regulator
Mon Nov 23 03:13:54 2020 kern.info kernel: [    3.627039] dwc2 1e101000.usb: DWC OTG Controller
Mon Nov 23 03:13:54 2020 kern.info kernel: [    3.630367] dwc2 1e101000.usb: new USB bus registered, assigned bus number 1
Mon Nov 23 03:13:54 2020 kern.info kernel: [    3.637484] dwc2 1e101000.usb: irq 62, io mem 0x1e101000
Mon Nov 23 03:13:54 2020 kern.info kernel: [    3.644619] hub 1-0:1.0: USB hub found
Mon Nov 23 03:13:54 2020 kern.info kernel: [    3.647624] hub 1-0:1.0: 1 port detected
Mon Nov 23 03:13:54 2020 kern.warn kernel: [    3.652011] dwc2 1e106000.usb: 1e106000.usb supply vusb_d not found, using dummy regulator
Mon Nov 23 03:13:54 2020 kern.warn kernel: [    3.659420] dwc2 1e106000.usb: 1e106000.usb supply vusb_a not found, using dummy regulator
Mon Nov 23 03:13:54 2020 kern.info kernel: [    3.771226] dwc2 1e106000.usb: DWC OTG Controller
Mon Nov 23 03:13:54 2020 kern.info kernel: [    3.774532] dwc2 1e106000.usb: new USB bus registered, assigned bus number 2
Mon Nov 23 03:13:54 2020 kern.info kernel: [    3.781676] dwc2 1e106000.usb: irq 91, io mem 0x1e106000
Mon Nov 23 03:13:54 2020 kern.info kernel: [    3.788431] hub 2-0:1.0: USB hub found
Mon Nov 23 03:13:54 2020 kern.info kernel: [    3.791400] hub 2-0:1.0: 1 port detected
Mon Nov 23 03:13:54 2020 user.info kernel: [    3.797483] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Mon Nov 23 03:13:54 2020 user.info kernel: [    3.807766] init: - preinit -
Mon Nov 23 03:13:54 2020 kern.info kernel: [    5.024086] lantiq,xrx200-net 1e108000.eth eth0: port 0 got link
Mon Nov 23 03:13:54 2020 kern.info kernel: [    5.028815] lantiq,xrx200-net 1e108000.eth eth0: port 1 got link
Mon Nov 23 03:13:54 2020 kern.info kernel: [    5.044466] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mon Nov 23 03:13:54 2020 kern.notice kernel: [    5.060857] random: procd: uninitialized urandom read (4 bytes read)
Mon Nov 23 03:13:54 2020 kern.warn kernel: [    9.367899] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
Mon Nov 23 03:13:54 2020 kern.warn kernel: [    9.373863] jffs2_build_filesystem(): unlocking the mtd device...
Mon Nov 23 03:13:54 2020 kern.warn kernel: [    9.373873] done.
Mon Nov 23 03:13:54 2020 kern.warn kernel: [    9.381761] jffs2_build_filesystem(): erasing all blocks after the end marker...
Mon Nov 23 03:13:54 2020 kern.notice kernel: [   49.115043] random: crng init done
Mon Nov 23 03:13:54 2020 kern.warn kernel: [   96.696911] done.
Mon Nov 23 03:13:54 2020 kern.notice kernel: [   96.697431] jffs2: notice: (571) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mon Nov 23 03:13:54 2020 user.info kernel: [   96.715741] mount_root: overlay filesystem has not been fully initialized yet
Mon Nov 23 03:13:54 2020 user.info kernel: [   96.727497] mount_root: switching to jffs2 overlay
Mon Nov 23 03:13:54 2020 kern.warn kernel: [   96.737984] overlayfs: upper fs does not support tmpfile.
Mon Nov 23 03:13:54 2020 user.warn kernel: [   97.752199] urandom-seed: Seed file not found (/etc/urandom.seed)
Mon Nov 23 03:13:54 2020 kern.info kernel: [   97.921968] lantiq,xrx200-net 1e108000.eth eth0: port 0 lost link
Mon Nov 23 03:13:54 2020 kern.info kernel: [   97.926867] lantiq,xrx200-net 1e108000.eth eth0: port 1 lost link
Mon Nov 23 03:13:54 2020 user.info kernel: [   97.948737] procd: - early -
Mon Nov 23 03:13:54 2020 user.info kernel: [   97.950373] procd: - watchdog -
Mon Nov 23 03:13:54 2020 user.info kernel: [   98.654037] procd: - watchdog -
Mon Nov 23 03:13:54 2020 user.info kernel: [   98.656427] procd: - ubus -
Mon Nov 23 03:13:54 2020 user.info kernel: [   98.747826] procd: - init -
Mon Nov 23 03:13:54 2020 user.info kernel: [  100.091733] kmodloader: loading kernel modules from /etc/modules.d/*
Mon Nov 23 03:13:54 2020 kern.info kernel: [  100.111212] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
Mon Nov 23 03:13:54 2020 kern.warn kernel: [  100.143295] Lantiq TAPI device driver, version 3.13.0.2, (c) 2001-2010 Lantiq Deutschland GmbH
Mon Nov 23 03:13:54 2020 kern.info kernel: [  100.171091] NET: Registered protocol family 8
Mon Nov 23 03:13:54 2020 kern.info kernel: [  100.174009] NET: Registered protocol family 20
Mon Nov 23 03:13:54 2020 kern.info kernel: [  100.203101] PPP generic driver version 2.4.2
Mon Nov 23 03:13:54 2020 kern.info kernel: [  100.269147] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG
Mon Nov 23 03:13:54 2020 kern.warn kernel: [  100.292204]
Mon Nov 23 03:13:54 2020 kern.warn kernel: [  100.292204]
Mon Nov 23 03:13:54 2020 kern.warn kernel: [  100.292204] Lantiq CPE API Driver version: DSL CPE API V4.17.18.6
Mon Nov 23 03:13:54 2020 kern.warn kernel: [  100.309878]
Mon Nov 23 03:13:54 2020 kern.warn kernel: [  100.309878] Predefined debug level: 3
Mon Nov 23 03:13:54 2020 kern.info kernel: [  100.355200] Loading modules backported from Linux version v5.8-0-gbcf876870b95
Mon Nov 23 03:13:54 2020 kern.info kernel: [  100.361102] Backport generated by backports.git v5.8-1-0-g79400d9e
Mon Nov 23 03:13:54 2020 kern.warn kernel: [  100.399144] Lantiq MIPS34KEc MPS driver, version 2.2.2.5, (c) 2006-2010 Lantiq Deutschland GmbH
Mon Nov 23 03:13:54 2020 kern.info kernel: [  100.406543] request_timer(2, 0x000001AE, 1)...
Mon Nov 23 03:13:54 2020 kern.warn kernel: [  100.406570] successful!
Mon Nov 23 03:13:54 2020 kern.warn kernel: [  100.413726] Lantiq VMMC device driver, version 1.9.0.3, (c) 2006-2010 Lantiq Deutschland GmbH
Mon Nov 23 03:13:54 2020 kern.info kernel: [  100.463598] Infineon Technologies DEU driver version 2.0.0
Mon Nov 23 03:13:54 2020 kern.notice kernel: [  100.483578] IFX DEU DES initialized (multiblock).
Mon Nov 23 03:13:54 2020 kern.notice kernel: [  100.499561] IFX DEU AES initialized (multiblock).
Mon Nov 23 03:13:54 2020 kern.notice kernel: [  100.507583] IFX DEU ARC4 initialized (multiblock).
Mon Nov 23 03:13:54 2020 kern.notice kernel: [  100.515193] IFX DEU SHA1 initialized.
Mon Nov 23 03:13:54 2020 kern.notice kernel: [  100.519242] IFX DEU MD5 initialized.
Mon Nov 23 03:13:54 2020 kern.notice kernel: [  100.527206] IFX DEU SHA1_HMAC initialized.
Mon Nov 23 03:13:54 2020 kern.notice kernel: [  100.530270] IFX DEU MD5_HMAC initialized.
Mon Nov 23 03:13:54 2020 kern.info kernel: [  100.561278] NET: Registered protocol family 24
Mon Nov 23 03:13:54 2020 kern.info kernel: [  100.595534] xt_time: kernel timezone is -0000
Mon Nov 23 03:13:54 2020 user.info kernel: [  100.951830] urngd: v1.0.2 started.
Mon Nov 23 03:13:54 2020 user.info kernel: [  100.968507] kmodloader: done loading kernel modules from /etc/modules.d/*
Mon Nov 23 03:13:55 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mon Nov 23 03:13:55 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: Connected to system UBus
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: started, version 2.82 cachesize 150
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: DNS service limited to local subnets
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: UBus support enabled: connected to system bus
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: using only locally-known addresses for domain test
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: using only locally-known addresses for domain onion
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: using only locally-known addresses for domain localhost
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: using only locally-known addresses for domain local
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: using only locally-known addresses for domain invalid
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: using only locally-known addresses for domain bind
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: using only locally-known addresses for domain lan
Mon Nov 23 03:13:55 2020 daemon.warn dnsmasq[1180]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: read /etc/hosts - 4 addresses
Mon Nov 23 03:13:55 2020 daemon.info dnsmasq[1180]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Mon Nov 23 03:13:56 2020 authpriv.info dropbear[1242]: Not backgrounding
Mon Nov 23 03:13:59 2020 daemon.notice wpa_supplicant[1351]: Successfully initialized wpa_supplicant
Mon Nov 23 03:14:00 2020 user.notice : Added device handler type: 8021ad
Mon Nov 23 03:14:00 2020 user.notice : Added device handler type: 8021q
Mon Nov 23 03:14:00 2020 user.notice : Added device handler type: macvlan
Mon Nov 23 03:14:00 2020 user.notice : Added device handler type: veth
Mon Nov 23 03:14:00 2020 user.notice : Added device handler type: bridge
Mon Nov 23 03:14:00 2020 user.notice : Added device handler type: Network device
Mon Nov 23 03:14:00 2020 user.notice : Added device handler type: tunnel
Mon Nov 23 03:14:04 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led wifi
Mon Nov 23 03:14:04 2020 daemon.notice procd: /etc/rc.d/S96led: Skipping trigger 'phy0radio' for led 'wifi' due to missing kernel module
Mon Nov 23 03:14:04 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led dsl
Mon Nov 23 03:14:04 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led internet
Mon Nov 23 03:14:09 2020 kern.info kernel: [  122.615654] br-lan: port 1(eth0.1) entered blocking state
Mon Nov 23 03:14:09 2020 kern.info kernel: [  122.619838] br-lan: port 1(eth0.1) entered disabled state
Mon Nov 23 03:14:09 2020 kern.info kernel: [  122.625605] device eth0.1 entered promiscuous mode
Mon Nov 23 03:14:09 2020 kern.info kernel: [  122.629887] device eth0 entered promiscuous mode
Mon Nov 23 03:14:09 2020 daemon.notice netifd: Interface 'lan' is enabled
Mon Nov 23 03:14:09 2020 daemon.notice netifd: Interface 'lan' is setting up now
Mon Nov 23 03:14:09 2020 daemon.debug dnsmasq[1180]: listening on br-lan(#3): 192.168.1.1 port 53
Mon Nov 23 03:14:09 2020 daemon.notice netifd: Interface 'lan' is now up
Mon Nov 23 03:14:09 2020 daemon.debug dnsmasq[1180]: listening on lo(#1): 127.0.0.1 port 53
Mon Nov 23 03:14:09 2020 daemon.debug dnsmasq[1180]: listening on lo(#1): ::1 port 53
Mon Nov 23 03:14:09 2020 daemon.notice netifd: Interface 'loopback' is enabled
Mon Nov 23 03:14:09 2020 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Nov 23 03:14:09 2020 daemon.notice netifd: Interface 'loopback' is now up
Mon Nov 23 03:14:09 2020 daemon.notice netifd: Network device 'lo' link is up
Mon Nov 23 03:14:09 2020 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Nov 23 03:14:10 2020 daemon.err odhcpd[1487]: Failed to send to ff02::1%lan@br-lan (Address not available)
Mon Nov 23 03:14:10 2020 daemon.notice netifd: radio0 (1813): Could not find PHY for device 'radio0'
Mon Nov 23 03:14:10 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Nov 23 03:14:12 2020 daemon.notice netifd: radio0 (1894): WARNING: Variable 'data' does not exist or is not an array/object
Mon Nov 23 03:14:12 2020 kern.info kernel: [  125.659311] lantiq,xrx200-net 1e108000.eth eth0: port 1 got link
Mon Nov 23 03:14:12 2020 kern.info kernel: [  125.664066] lantiq,xrx200-net 1e108000.eth eth0: port 0 got link
Mon Nov 23 03:14:12 2020 kern.info kernel: [  125.670008] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mon Nov 23 03:14:12 2020 kern.info kernel: [  125.677034] br-lan: port 1(eth0.1) entered blocking state
Mon Nov 23 03:14:12 2020 kern.info kernel: [  125.681625] br-lan: port 1(eth0.1) entered forwarding state
Mon Nov 23 03:14:12 2020 kern.info kernel: [  125.687896] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Mon Nov 23 03:14:12 2020 daemon.notice netifd: Network device 'eth0' link is up
Mon Nov 23 03:14:12 2020 daemon.notice netifd: VLAN 'eth0.1' link is up
Mon Nov 23 03:14:12 2020 daemon.notice netifd: bridge 'br-lan' link is up
Mon Nov 23 03:14:12 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Nov 23 03:14:12 2020 daemon.info procd: - init complete -
Mon Nov 23 03:14:12 2020 daemon.err odhcpd[1487]: Failed to send to fe80::6de2:7636:91b2:91e3%lan@br-lan (Address not available)
Mon Nov 23 03:14:13 2020 daemon.err odhcpd[1487]: Failed to send to ff02::1%lan@br-lan (Address not available)
Mon Nov 23 03:14:14 2020 daemon.info urandom_seed[1999]: Seed saved (/etc/urandom.seed)
Mon Nov 23 03:14:14 2020 daemon.debug dnsmasq[1180]: listening on br-lan(#3): fd94:6b41:b150::1 port 53
Mon Nov 23 03:14:14 2020 daemon.debug dnsmasq[1180]: listening on br-lan(#3): fe80::9e80:dfff:feb2:ce6a%br-lan port 53
Mon Nov 23 03:14:14 2020 daemon.debug dnsmasq[1180]: listening on eth0(#2): fe80::9e80:dfff:feb2:ce6a%eth0 port 53
Mon Nov 23 03:14:15 2020 user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override
Mon Nov 23 03:14:15 2020 daemon.info dnsmasq[1180]: read /etc/hosts - 4 addresses
Mon Nov 23 03:14:15 2020 daemon.info dnsmasq[1180]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Mon Nov 23 03:14:17 2020 user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override
Mon Nov 23 03:14:18 2020 daemon.info dnsmasq[1180]: read /etc/hosts - 4 addresses
Mon Nov 23 03:14:18 2020 daemon.info dnsmasq[1180]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Mon Nov 23 03:15:17 2020 authpriv.info dropbear[2286]: Child connection from 192.168.1.5:49934
Mon Nov 23 03:15:20 2020 authpriv.notice dropbear[2286]: Auth succeeded with blank password for 'root' from 192.168.1.5:49934


25.11.20203472Base systemBug ReportVery LowLowbrcmfmac: can't handle firmware responsesTrunkUnconfirmed Task Description

Device: ASUS RT-AC88U
OpenWrt: trunk as of 25th November 2020
Firmware: BCM43664/4 wl0: Nov 5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
Firmware: BCM43664/4 wl0: Jan 30 2019 17:31:05 version 10.10.122.303 (r666429 WLTEST) FWID 01-3569d737
Firmware: BCM43664/4 wl0: Aug 23 2016 17:19:51 version 10.10.69.69 (r625687) FWID 01-8438621f

brcmfmac can’t seem to handle firmware responses. Here’s the relevant path from the bootlog:

[   11.280145] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
[   11.503465] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.asus,rt-ac88u.txt failed with error -2
[   11.514615] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
[   13.870099] ieee80211 phy0: brcmf_msgbuf_query_dcmd: Timeout on response for query command
[   13.878396] ieee80211 phy0: brcmf_c_preinit_dcmds: Retrieving cur_etheraddr failed, -5
[   13.886344] ieee80211 phy0: brcmf_bus_started: failed: -5
[   13.891769] ieee80211 phy0: brcmf_attach: dongle is not responding: err=-5
[   16.350348] pci_bus 0001:01: 1-byte config write to 0001:01:00.0 offset 0x3c may corrupt adjacent RW1C bits
[   16.360143] pci 0001:00:00.0: enabling device (0140 -> 0142)
[   16.365816] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   16.375505] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   16.385188] brcmfmac 0001:01:00.0: enabling device (0140 -> 0142)
[   16.391296] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   16.400978] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   16.580152] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
[   16.591812] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.asus,rt-ac88u.txt failed with error -2
[   16.602960] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
[   16.713759] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   16.952788] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
[   16.961624] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   16.972888] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43664/4 wl0: Nov  5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
[  132.622766] ieee80211 phy1: brcmf_cfg80211_get_channel: chanspec failed (-52)
23.11.20203469Base systemBug ReportVery LowLowDevice stops passing broadcast packets to wireless inte...TrunkUnconfirmed Task Description

Device problem occurs on + Software versions of OpenWrt/LEDE release, packages, etc:

D-Link DIR-882 device with a recent build from trunk. It has the MediaTek MT7621A SoC inside.

Steps to reproduce:

I have a strange problem with my openwrt device.

When it freshly boots all is working fine. After 24H (quite on the spot) there seems to be no more broadcast traffic going to the wireless interfaces. I have confirmed this with ARP and mDNS packets. A restart of the bridge (in luci or via /etc/init.d/network restart resolves this for another 24H.

I know another user with the same device and he also confirmed the issue. We made a monitoring script to make ARP requests and were able to observe the recurring behavior.

To reproduce, ‘nping -arp’ an ip on the wifi interface from a device on the wired interface. Wait for uptime to reach 24H, see if there are ARP requests responses from the wifi device.With some time, entries in ARP caches expire and this also manifests as inability to ping devices in the LAN between interfaces.

Issue doesn’t happen when target is in the wired interface. Issue does happen when target is in the wireless interface regardless if the source is the same interface of another one.

I have just a default config. Didn’t add any fancy routing or anything. Just configured wifi networks.

Once I was away from home and it was in the malfunctioning state for over 24H, it then switched back to working state. I only had the chance to test this once so it is just a theory but it might be toggling between good and bad states every 24H.

Possibly related (but no solution): https://forum.openwrt.org/t/clients-in-same-wlan-cant-reach-each-other/2501 Based on the topic above I tried to disable `multicast_to_unicast` feature on the bridge but it didn’t make a difference.

Happy to provide additional details if needed, Arik.

23.11.20203468Base systemBug ReportVery LowLowFriendlyElec NanoPi R2S mmc_host clock errorTrunkUnconfirmed Task Description

- FriendlyElec NanoPi R2S
- OpenWrt latest release

 

[ 0.198279] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available yet, deferred probing
[ 0.200603] dwc3 ff600000.dwc3: Failed to get clk ‘ref’: -2

[ 35.824776] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 35.878229] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[ 36.037807] dwmmc_rockchip ff500000.dwmmc: Successfully tuned phase to 190
[ 44.388814] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 44.548904] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[ 44.590737] dwmmc_rockchip ff500000.dwmmc: All phases work, using default phase 0.
[ 45.361969] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 45.520553] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[ 45.558426] dwmmc_rockchip ff500000.dwmmc: All phases work, using default phase 0.
[ 55.906843] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 56.087807] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[ 56.125748] dwmmc_rockchip ff500000.dwmmc: All phases work, using default phase 0.


16.11.20203456Base systemBug ReportVery LowLowtl-wdr3600 2,4ghz wireless not work 40Mhz channel and m...AllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
TL WDR3600 v1
- Software versions of OpenWrt/LEDE release, packages, etc.
OpenWrt 19.07.4 r11208-ce6496d796 / LuCI openwrt-19.07 branch git-20.313.59566-7460e9d
kmod-cfg80211 - 4.14.195+4.19.137-1-2
kmod-mac80211 - 4.14.195+4.19.137-1-2
Generic 802.11bgn

root@OpenWrt:~# iw phy phy0 info
Wiphy phy0
        max # scan SSIDs: 4
        max scan IEs length: 2257 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports AP-side u-APSD.
        Device supports T-DLS.
        Available Antennas: TX 0x3 RX 0x3
        Configured Antennas: TX 0x3 RX 0x3
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * monitor
                 * mesh point
                 * P2P-client
                 * P2P-GO
                 * outside context of a BSS
        Band 1:
                Capabilities: 0x11ef
                        RX LDPC
                        HT20/HT40
                        SM Power Save disabled
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 1-stream
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 8 usec (0x06)
                HT TX/RX MCS rate indexes supported: 0-15
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (20.0 dBm)
                        * 2442 MHz [7] (20.0 dBm)
                        * 2447 MHz [8] (20.0 dBm)
                        * 2452 MHz [9] (20.0 dBm)
                        * 2457 MHz [10] (20.0 dBm)
                        * 2462 MHz [11] (20.0 dBm)
                        * 2467 MHz [12] (20.0 dBm)
                        * 2472 MHz [13] (20.0 dBm)
                        * 2484 MHz [14] (disabled)
        valid interface combinations:
                 * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1,
                   total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz }

        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing
        Supported extended features:
                * [ RRM ]: RRM
                * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
                * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
                * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs

- Steps to reproduce

Connect to a wifi without encryption

root@OpenWrt:~# cat /var/run/wpa_supplicant-wlan0.conf

country=IT
network={
        scan_ssid=1
        ssid="free-WiFi"
        key_mgmt=NONE
        beacon_int=100
}

multiple disconnections have occurred and the 40 Mhz channel size does not work but only 20 Mhz even though I select “40ht” in the settings, but the parameter is ignored

[ 9310.919517] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[ 9310.942108] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[ 9310.949574] wlan0: authenticated
[ 9310.958118] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[ 9310.967484] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[ 9310.975528] wlan0: associated
[ 9310.980545] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[14386.169903] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[14386.192135] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[14386.221460] wlan0: authenticated
[14386.258393] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[14386.268632] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[14386.276858] wlan0: associated
[150814.159420] wlan0: cannot understand ECSA IE operating class, 4, ignoring
[150814.166639] wlan0: AP aa:bb:cc:dd:ee:ff tries to chanswitch to same channel, ignore
[152268.305454] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[152268.327706] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[152268.464092] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 2/3)
[152268.584729] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 3/3)
[152268.724110] wlan0: authentication with aa:bb:cc:dd:ee:ff timed out
[152270.325114] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[152270.347410] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[152270.447867] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 2/3)
[152270.550270] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 3/3)
[152270.646190] wlan0: authentication with aa:bb:cc:dd:ee:ff timed out
[152272.215055] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[152272.237313] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[152272.244860] wlan0: authenticated
[152272.254162] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[152272.263364] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[152272.271469] wlan0: associated
[155444.244711] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[155444.266922] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[155444.350695] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 2/3)
[155444.415256] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 3/3)
[155444.500674] wlan0: authentication with aa:bb:cc:dd:ee:ff timed out
[155448.144033] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[155448.166261] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[155448.179452] wlan0: authenticated
[155448.193209] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[155448.203713] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[155448.211780] wlan0: associated
[169407.360674] wlan0: cannot understand ECSA IE operating class, 4, ignoring
[169407.367880] wlan0: AP aa:bb:cc:dd:ee:ff tries to chanswitch to same channel, ignore
[180804.557552] wlan0: cannot understand ECSA IE operating class, 4, ignoring
[181313.033648] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[181313.055903] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[181313.209864] wlan0: authenticated
[181313.222629] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[181313.256578] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[181313.264725] wlan0: associated
[183301.022778] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[183301.044996] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[183301.067456] wlan0: authenticated
[183301.138782] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[183301.155290] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[183301.163425] wlan0: associated
[185525.016165] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[185525.038608] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[185525.060327] wlan0: authenticated
[185525.105330] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[185525.115047] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[185525.123140] wlan0: associated
[185969.001341] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[185969.023612] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[185969.149850] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 2/3)
[185969.259845] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 3/3)
[185969.381172] wlan0: authentication with aa:bb:cc:dd:ee:ff timed out
[185970.980914] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[185971.003176] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[185971.019374] wlan0: authenticated
[185971.049820] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[185971.060003] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[185971.068073] wlan0: associated
[186860.996960] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[186861.019228] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[186861.043203] wlan0: authenticated
[186861.075375] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[186861.090284] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[186861.098418] wlan0: associated
[186868.836153] wlan0: deauthenticating from aa:bb:cc:dd:ee:ff by local choice (Reason: 3=DEAUTH_LEAVING)
[186870.049178] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[186871.506366] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[186871.528653] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[186871.544687] wlan0: authenticated
[186871.594551] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[186871.613869] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[186871.621999] wlan0: associated
[186871.626962] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[187310.993064] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[187311.015717] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[187311.111429] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 2/3)
[187311.233939] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 3/3)
[187311.353993] wlan0: authenticated
[187311.361174] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[187311.382512] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[187311.390594] wlan0: associated
[187757.053230] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[187757.075521] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[187757.088849] wlan0: authenticated
[187757.139109] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[187757.149248] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[187757.157302] wlan0: associated
[188670.468838] wlan0: cannot understand ECSA IE operating class, 4, ignoring
[188670.475883] wlan0: AP aa:bb:cc:dd:ee:ff tries to chanswitch to same channel, ignore
[189088.021521] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[189088.043814] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[189088.169749] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 2/3)
[189088.299751] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 3/3)
[189088.359034] wlan0: authentication with aa:bb:cc:dd:ee:ff timed out
[189089.971099] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[189089.993326] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[189090.009912] wlan0: authenticated
[189090.039699] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[189090.049231] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[189090.057352] wlan0: associated
[189093.870846] wlan0: deauthenticating from aa:bb:cc:dd:ee:ff by local choice (Reason: 3=DEAUTH_LEAVING)
[189095.520884] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[189096.970549] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[189096.992821] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[189097.006463] wlan0: authenticated
[189097.048873] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[189097.059923] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[189097.067986] wlan0: associated
[189097.073072] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[189534.976401] wlan0: authenticate with 92:36:6d:93:99:85
[189534.998671] wlan0: send auth to 92:36:6d:93:99:85 (try 1/3)
[189535.094182] wlan0: send auth to 92:36:6d:93:99:85 (try 2/3)
[189535.183706] wlan0: send auth to 92:36:6d:93:99:85 (try 3/3)
[189535.271126] wlan0: authentication with 92:36:6d:93:99:85 timed out
[189536.446534] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[189536.468847] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[189536.495448] wlan0: authenticated
[189536.535539] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[189536.554540] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[189536.562656] wlan0: associated
[201274.903601] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[201274.925850] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[201275.042060] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 2/3)
[201275.162035] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 3/3)
[201275.292501] wlan0: authentication with aa:bb:cc:dd:ee:ff timed out
[201276.883507] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[201276.905711] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[201276.932138] wlan0: authenticated
[201276.942689] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[201276.952788] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[201276.960847] wlan0: associated
[237811.689601] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[237811.712053] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[237811.738528] wlan0: authenticated
[237811.778333] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[237811.796957] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[237811.805098] wlan0: associated
[237819.383155] wlan0: deauthenticating from aa:bb:cc:dd:ee:ff by local choice (Reason: 3=DEAUTH_LEAVING)
[237820.815792] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[237822.219411] wlan0: authenticate with aa:bb:cc:dd:ee:ff
[237822.241683] wlan0: send auth to aa:bb:cc:dd:ee:ff (try 1/3)
[237822.283742] wlan0: authenticated
[237822.297883] wlan0: associate with aa:bb:cc:dd:ee:ff (try 1/3)
[237822.310358] wlan0: RX AssocResp from aa:bb:cc:dd:ee:ff (capab=0x401 status=0 aid=1)
[237822.318491] wlan0: associated
[237822.325975] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
16.11.20203455Base systemBug ReportVery LowLowtl-wdr3600 5ghz wireless multiple disconnection in clie...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
TL WDR3600 v1
- Software versions of OpenWrt/LEDE release, packages, etc.
OpenWrt 19.07.4 r11208-ce6496d796 / LuCI openwrt-19.07 branch git-20.313.59566-7460e9d
kmod-ath9k - 4.14.195+4.19.137-1-2 (Atheros AR9580 802.11an)

root@OpenWrt:~# iw phy phy1 info
Wiphy phy1
        max # scan SSIDs: 4
        max scan IEs length: 2261 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports AP-side u-APSD.
        Device supports T-DLS.
        Available Antennas: TX 0x3 RX 0x3
        Configured Antennas: TX 0x3 RX 0x3
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * monitor
                 * mesh point
                 * P2P-client
                 * P2P-GO
                 * outside context of a BSS
        Band 2:
                Capabilities: 0x11ef
                        RX LDPC
                        HT20/HT40
                        SM Power Save disabled
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 1-stream
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 8 usec (0x06)
                HT TX/RX MCS rate indexes supported: 0-15
                Frequencies:
                        * 5180 MHz [36] (19.0 dBm)
                        * 5200 MHz [40] (19.0 dBm)
                        * 5220 MHz [44] (19.0 dBm)
                        * 5240 MHz [48] (19.0 dBm)
                        * 5260 MHz [52] (19.0 dBm) (radar detection)
                        * 5280 MHz [56] (19.0 dBm) (radar detection)
                        * 5300 MHz [60] (19.0 dBm) (radar detection)
                        * 5320 MHz [64] (19.0 dBm) (radar detection)
                        * 5500 MHz [100] (19.0 dBm) (radar detection)
                        * 5520 MHz [104] (19.0 dBm) (radar detection)
                        * 5540 MHz [108] (19.0 dBm) (radar detection)
                        * 5560 MHz [112] (19.0 dBm) (radar detection)
                        * 5580 MHz [116] (19.0 dBm) (radar detection)
                        * 5600 MHz [120] (19.0 dBm) (radar detection)
                        * 5620 MHz [124] (19.0 dBm) (radar detection)
                        * 5640 MHz [128] (19.0 dBm) (radar detection)
                        * 5660 MHz [132] (19.0 dBm) (radar detection)
                        * 5680 MHz [136] (19.0 dBm) (radar detection)
                        * 5700 MHz [140] (19.0 dBm) (radar detection)
                        * 5745 MHz [149] (13.0 dBm)
                        * 5765 MHz [153] (13.0 dBm)
                        * 5785 MHz [157] (13.0 dBm)
                        * 5805 MHz [161] (13.0 dBm)
                        * 5825 MHz [165] (13.0 dBm)
        valid interface combinations:
                 * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1,
                   total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz }

        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing
        Supported extended features:
                * [ RRM ]: RRM
                * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
                * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
                * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs

- Steps to reproduce

Connect to a wifi without encryption

root@OpenWrt:~# cat /var/run/wpa_supplicant-wlan0.conf

country=IT
network={
        scan_ssid=1
        ssid="free-WiFi"
        key_mgmt=NONE
        beacon_int=100
}

multiple disconnection

see attach file

16.11.20203454Base systemBug ReportVery LowMediumNetgear WNDR3800 VLAN switch broken 19.07.4openwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

With the latest release of OpenWrt (19.07.4) using a VLAN > 16 fails. It’s rather strange as this was a problem years ago with the RTL8366s switch on these devices. I verified the firmware is reporting itself as 19.07.4 (I wondered if the files got mixed up and I was using some 18.xx version due to issues with the download site, but that is not the case).

As long as the VLAN/VID are below 16 everything works properly, but for a VLAN > 16 (regardless of whether one keeps the VLAN ⇐ 16 and only sets the VID to the actual VLAN (e.g. to match a switch into which the WNDR3800 is plugged).
For now I’ve just been disabling the switch and configuring software VLAN and letting the other switch sort out tagging/untagging.

I did some experimenting and it looks like the switch config has had some kind of weird regression.

I don’t have a spare device (and am not set up for developing / building OpenWrt at the moment), so this is more of placeholder bug until someone with resources (device / time / etc) can work on it.

On a separate note: is GitHub login deliberately disabled, or is it only me that’s having logging in with GitHub – basically is this deliberate/known or should I file a separate bug for that?

14.11.20203452Base systemBug ReportVery LowLowcan't conntect to dropbear using OpenSSH 8.4openwrt-19.07Unconfirmed Task Description

Can’t connect to dropbear after upgrading to Fedora 33

Using: OpenSSH_8.4p1, OpenSSL 1.1.1h FIPS 22 Sep 2020

Adding “PubkeyAcceptedKeyTypes=+ssh-dss” to $.ssh/config Hosts section solves the issue.

May be related to this: https://superuser.com/questions/1016989/ssh-dsa-keys-no-longer-work-for-password-less-authentication

13.11.20203449Base systemBug ReportVery LowLowfailsafe packet sent to udp/4919 does not match interfa...AllUnconfirmed Task Description

Tested on Netgear EX3700 with OpenWrt 19.07.2 r10947-65030d81f3, but also applies to trunk.

During preinit the interface is configured with failsafe ip address and physical mac, so packets are sent out with sender address that may not be the same configured for the interface. This may result in conficts with other devices in the network.

It is possibile to disable those messages by setting CONFIG_TARGET_PREINIT_SHOW_NETMSG and CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG, but the latter is not set in default config. It would be safer to disable messages by default.


12.11.20203446Base systemBug ReportVery LowLowNo WAN on EA7500 V1 since snapshots of November 9th 202...TrunkUnconfirmed Task Description
# logread
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    0.000000] Linux version 5.4.75 (redalert@megadef) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r14926-41b867165d)) #0 SMP Thu Nov 12 17:21:55 2020
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] CPU: div instructions available: patching division code
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] OF: fdt: Machine model: Linksys EA7500 V1 WiFi Router
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] Memory policy: Data cache writealloc
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.000000] On node 0 totalpages: 57344
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.000000]   Normal zone: 504 pages used for memmap
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.000000]   Normal zone: 57344 pages, LIFO batch:15
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s30156 r8192 d23092 u61440
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.000000] pcpu-alloc: s30156 r8192 d23092 u61440 alloc=15*4096
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 56840
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=16
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs ubi.mtd=16,2048 ubi.block=0,0 root=/dev/ubiblock0_0 rootwait ro
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] Memory: 217252K/229376K available (5928K kernel code, 191K rwdata, 1508K rodata, 1024K init, 228K bss, 12124K reserved, 0K cma-reserved, 0K highmem)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x340/0x4e8 with crng_init=0
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000007] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000020] Switching to timer-based delay loop, resolution 160ns
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000244] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000263] pid_max: default: 32768 minimum: 301
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000459] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.000477] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.001497] CPU: Testing write buffer coherency: ok
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.002672] Setting up static identity map for 0x42300000 - 0x42300060
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.002849] rcu: Hierarchical SRCU implementation.
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.003359] smp: Bringing up secondary CPUs ...
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.005273] smp: Brought up 1 node, 2 CPUs
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.005289] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.005299] CPU: All CPU(s) started in SVC mode.
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.015520] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.015679] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.015706] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.015872] pinctrl core: initialized pinctrl subsystem
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.017039] NET: Registered protocol family 16
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.017352] DMA: preallocated 256 KiB pool for atomic coherent allocations
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.018694] cpuidle: using governor ladder
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.018761] cpuidle: using governor menu
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.050126] usbcore: registered new interface driver usbfs
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.050215] usbcore: registered new interface driver hub
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.050298] usbcore: registered new device driver usb
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.050370] pps_core: LinuxPPS API ver. 1 registered
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.050382] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.050421] PTP clock support registered
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    0.051184] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.052451] clocksource: Switched to clocksource dg_timer
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.053351] thermal_sys: Registered thermal governor 'step_wise'
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.055755] NET: Registered protocol family 2
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.056325] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.056367] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.056402] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.056435] TCP: Hash tables configured (established 2048 bind 2048)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.056538] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.056570] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.056794] NET: Registered protocol family 1
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.056848] PCI: CLS 0 bytes, default 64
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.058196] workingset: timestamp_bits=14 max_order=16 bucket_order=2
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.065135] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.065151] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    0.104920] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    0.105068] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    0.105180] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.105450] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.105477] qcom-pcie 1b500000.pci: Parsing ranges property...
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.105523] qcom-pcie 1b500000.pci:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.105561] qcom-pcie 1b500000.pci:   MEM 0x08000000..0x0fdfffff -> 0x08000000
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.327873] qcom-pcie 1b500000.pci: Link up
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.328043] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.328069] pci_bus 0000:00: root bus resource [bus 00-ff]
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.328090] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.328106] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.328124] pci_bus 0000:00: scanning bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.328171] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.328337] pci 0000:00:00.0: supports D1
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.328355] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.328378] pci 0000:00:00.0: PME# disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.332215] pci_bus 0000:00: fixups for bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.332239] PCI: bus0: Fast back to back transfers disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.332259] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.332391] pci_bus 0000:01: scanning bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.332581] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.333077] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.334319] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.334367] pci 0000:01:00.0: PME# disabled
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.334629] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.338410] pci_bus 0000:01: fixups for bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.338486] PCI: bus1: Fast back to back transfers disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.338503] pci_bus 0000:01: bus scan returning with max=01
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.338522] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.338542] pci_bus 0000:00: bus scan returning with max=ff
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.338576] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.338602] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.338739] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.338764] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.338957] pcieport 0000:00:00.0: assign IRQ: got 35
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.339722] pcieport 0000:00:00.0: AER: enabled with IRQ 36
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    0.340298] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    0.340429] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    0.340549] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.340803] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.340825] qcom-pcie 1b700000.pci: Parsing ranges property...
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.340869] qcom-pcie 1b700000.pci:    IO 0x31e00000..0x31efffff -> 0x31e00000
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.340904] qcom-pcie 1b700000.pci:   MEM 0x2e000000..0x31dfffff -> 0x2e000000
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.569952] qcom-pcie 1b700000.pci: Link up
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.570104] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.570123] pci_bus 0001:00: root bus resource [bus 00-ff]
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.570140] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.570157] pci_bus 0001:00: scanning bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.570199] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.570344] pci 0001:00:00.0: supports D1
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.570360] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.570377] pci 0001:00:00.0: PME# disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.574283] pci_bus 0001:00: fixups for bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.574306] PCI: bus0: Fast back to back transfers disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.574324] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.574444] pci_bus 0001:01: scanning bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.574618] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.574971] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.576115] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.576160] pci 0001:01:00.0: PME# disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.580137] pci_bus 0001:01: fixups for bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.580209] PCI: bus1: Fast back to back transfers disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.580224] pci_bus 0001:01: bus scan returning with max=01
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.580242] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.580260] pci_bus 0001:00: bus scan returning with max=ff
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.580288] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.580312] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.580437] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.580459] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.580644] pcieport 0001:00:00.0: assign IRQ: got 37
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.581356] pcieport 0001:00:00.0: AER: enabled with IRQ 38
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    0.581945] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    0.582067] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda_phy not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    0.582174] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda_refclk not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.582456] qcom-pcie 1b900000.pci: host bridge /soc/pci@1b900000 ranges:
Thu Nov 12 20:20:17 2020 kern.debug kernel: [    0.582480] qcom-pcie 1b900000.pci: Parsing ranges property...
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.582520] qcom-pcie 1b900000.pci:    IO 0x35e00000..0x35efffff -> 0x35e00000
Thu Nov 12 20:20:17 2020 kern.info kernel: [    0.582555] qcom-pcie 1b900000.pci:   MEM 0x32000000..0x35dfffff -> 0x32000000
Thu Nov 12 20:20:17 2020 kern.info kernel: [    1.733889] qcom-pcie 1b900000.pci: Phy link never came up
Thu Nov 12 20:20:17 2020 kern.err kernel: [    1.735949] qcom-pcie 1b900000.pci: cannot initialize host
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    1.736350] qcom-pcie: probe of 1b900000.pci failed with error -110
Thu Nov 12 20:20:17 2020 kern.info kernel: [    1.738663] L2 @ QSB rate. Forcing new rate.
Thu Nov 12 20:20:17 2020 kern.info kernel: [    1.738884] L2 @ 384000 KHz
Thu Nov 12 20:20:17 2020 kern.info kernel: [    1.739066] CPU0 @ 800000 KHz
Thu Nov 12 20:20:17 2020 kern.info kernel: [    1.739078] CPU1 @ QSB rate. Forcing new rate.
Thu Nov 12 20:20:17 2020 kern.info kernel: [    1.739207] CPU1 @ 384000 KHz
Thu Nov 12 20:20:17 2020 kern.info kernel: [    1.742989] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Thu Nov 12 20:20:17 2020 kern.info kernel: [    1.745190] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Thu Nov 12 20:20:17 2020 kern.info kernel: [    1.745982] msm_serial 16340000.serial: msm_serial: detected port #0
Thu Nov 12 20:20:17 2020 kern.info kernel: [    1.746034] msm_serial 16340000.serial: uartclk = 7372800
Thu Nov 12 20:20:17 2020 kern.info kernel: [    1.746108] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 39, base_baud = 460800) is a MSM
Thu Nov 12 20:20:17 2020 kern.info kernel: [    1.746147] msm_serial: console setup on port #0
Thu Nov 12 20:20:17 2020 kern.info kernel: [    2.598600] printk: console [ttyMSM0] enabled
Thu Nov 12 20:20:17 2020 kern.info kernel: [    2.603666] msm_serial: driver initialized
Thu Nov 12 20:20:17 2020 kern.info kernel: [    2.612949] loop: module loaded
Thu Nov 12 20:20:17 2020 kern.info kernel: [    2.614525] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
Thu Nov 12 20:20:17 2020 kern.info kernel: [    2.614905] nand: AMD/Spansion S34MS01G2
Thu Nov 12 20:20:17 2020 kern.info kernel: [    2.621496] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.625701] 19 fixed-partitions partitions found on MTD device qcom_nand.0
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.632885] Creating 19 MTD partitions on "qcom_nand.0":
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.639648] 0x000000000000-0x000000040000 : "SBL1"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.646611] 0x000000040000-0x000000180000 : "MIBIB"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.652707] 0x000000180000-0x0000002c0000 : "SBL2"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.657466] 0x0000002c0000-0x000000540000 : "SBL3"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.660067] random: fast init done
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.668425] 0x000000540000-0x000000660000 : "DDRCONFIG"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.671232] 0x000000660000-0x000000780000 : "SSD"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.675496] 0x000000780000-0x000000a00000 : "TZ"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.682461] 0x000000a00000-0x000000c80000 : "RPM"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.687549] 0x000000c80000-0x000000dc0000 : "art"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.690515] 0x000000dc0000-0x000000ec0000 : "APPSBL"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.694071] 0x000000ec0000-0x000000f00000 : "u_env"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.697830] 0x000000f00000-0x000000f40000 : "s_env"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.702437] 0x000000f40000-0x000000f80000 : "devinfo"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.707346] 0x000000f80000-0x000003780000 : "kernel1"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.778212] 0x000001280000-0x000003780000 : "rootfs1"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.839660] 0x000003780000-0x000005f80000 : "kernel2"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.905980] 0x000003a80000-0x000005f80000 : "rootfs2"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.967364] 0x000005f80000-0x000006080000 : "sysdiag"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.969950] 0x000006080000-0x000008000000 : "syscfg"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [    2.995820] random: crng init done
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.025346] libphy: ipq8064_mdio_bus: probed
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.046052] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.874960] libphy: Fixed MDIO Bus: probed
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.875635] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.877958] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    3.885510] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.892332] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.898184] ipq806x-gmac-dwmac 37200000.ethernet: 	DWMAC1000
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.905635] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.911378] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.919194] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.927063] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.932906] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.940198] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.947056] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.954586] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.961549] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.967809] ipq806x-gmac-dwmac 37200000.ethernet: device MAC address 16:6b:c5:27:96:cf
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.977394] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.984217] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
Thu Nov 12 20:20:17 2020 kern.warn kernel: [    3.991539] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
Thu Nov 12 20:20:17 2020 kern.info kernel: [    3.998261] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
Thu Nov 12 20:20:17 2020 kern.info kernel: [    4.004362] ipq806x-gmac-dwmac 37400000.ethernet: 	DWMAC1000
Thu Nov 12 20:20:17 2020 kern.info kernel: [    4.011723] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [    4.017627] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [    4.025344] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
Thu Nov 12 20:20:17 2020 kern.info kernel: [    4.033247] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [    4.038979] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [    4.046430] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
Thu Nov 12 20:20:17 2020 kern.info kernel: [    4.053210] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
Thu Nov 12 20:20:17 2020 kern.info kernel: [    4.060683] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
Thu Nov 12 20:20:17 2020 kern.info kernel: [    4.067800] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.073978] ipq806x-gmac-dwmac 37400000.ethernet: device MAC address 9e:eb:13:3b:0b:e2
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.083647] i2c /dev entries driver
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.092666] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.093946] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.101615] sdhci: Secure Digital Host Controller Interface driver
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.108348] sdhci: Copyright(c) Pierre Ossman
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.114561] sdhci-pltfm: SDHCI platform and OF driver helper
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.121247] NET: Registered protocol family 10
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.127167] Segment Routing with IPv6
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.128988] NET: Registered protocol family 17
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.133980] 8021q: 802.1Q VLAN Support v1.8
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.137039] Registering SWP/SWPB emulation handler
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.162913] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.179360] s1a: Bringing 0uV into 1050000-1050000uV
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.179618] s1a: supplied by regulator-dummy
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.183623] s1b: Bringing 0uV into 1050000-1050000uV
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.187842] s1b: supplied by regulator-dummy
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.192706] s2a: Bringing 0uV into 800000-800000uV
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.197112] s2a: supplied by regulator-dummy
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.201594] s2b: Bringing 0uV into 800000-800000uV
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.206134] s2b: supplied by regulator-dummy
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.219101] ubi0: attaching mtd16
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.490681] ubi0: scanning is finished
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.500858] ubi0: attached mtd16 (name "rootfs2", size 37 MiB)
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.500879] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.505655] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.512431] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.519365] ubi0: good PEBs: 296, bad PEBs: 0, corrupted PEBs: 0
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.526120] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.532311] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1587269547
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.539420] ubi0: available PEBs: 0, total reserved PEBs: 296, PEBs reserved for bad PEB handling: 20
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.549474] block ubiblock0_0: created from ubi0:0(rootfs)
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.549699] ubi0: background thread "ubi_bgt0d" started, PID 68
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    4.557818] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.557825] hctosys: unable to open rtc device (rtc0)
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.595247] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.598547] Freeing unused kernel memory: 1024K
Thu Nov 12 20:20:18 2020 kern.info kernel: [    4.624007] Run /sbin/init as init process
Thu Nov 12 20:20:18 2020 user.info kernel: [    5.035502] init: Console is alive
Thu Nov 12 20:20:18 2020 user.info kernel: [    5.035628] init: - watchdog -
Thu Nov 12 20:20:18 2020 user.info kernel: [    5.736018] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Nov 12 20:20:18 2020 kern.info kernel: [    5.781420] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Nov 12 20:20:18 2020 kern.notice kernel: [    5.790883] SCSI subsystem initialized
Thu Nov 12 20:20:18 2020 kern.debug kernel: [    5.801179] libata version 3.00 loaded.
Thu Nov 12 20:20:18 2020 kern.info kernel: [    5.804896] ehci-fsl: Freescale EHCI Host controller driver
Thu Nov 12 20:20:18 2020 kern.info kernel: [    5.805433] ehci-platform: EHCI generic platform driver
Thu Nov 12 20:20:18 2020 kern.info kernel: [    5.812489] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Nov 12 20:20:18 2020 kern.info kernel: [    5.815365] ohci-platform: OHCI generic platform driver
Thu Nov 12 20:20:18 2020 kern.err kernel: [    5.822823] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [    5.825847] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [    5.831752] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [    5.837897] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [    5.848168] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [    5.849458] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [    5.855256] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [    5.861265] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [    5.868640] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
Thu Nov 12 20:20:18 2020 kern.err kernel: [    5.966345] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.065308] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.065371] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.069909] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.077404] xhci-hcd xhci-hcd.0.auto: irq 42, io mem 0x11000000
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.087837] hub 1-0:1.0: USB hub found
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.092573] hub 1-0:1.0: 1 port detected
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.096629] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.100429] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.105784] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.113833] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.120284] hub 2-0:1.0: USB hub found
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.128199] hub 2-0:1.0: 1 port detected
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.131944] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.135835] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.141174] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.148691] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x10000000
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.158581] hub 3-0:1.0: USB hub found
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.163965] hub 3-0:1.0: 1 port detected
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.167892] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.171773] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.177133] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.185338] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.191568] hub 4-0:1.0: USB hub found
Thu Nov 12 20:20:18 2020 kern.info kernel: [    6.199559] hub 4-0:1.0: 1 port detected
Thu Nov 12 20:20:18 2020 user.info kernel: [    6.204241] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Nov 12 20:20:18 2020 user.info kernel: [    6.213441] init: - preinit -
Thu Nov 12 20:20:18 2020 kern.info kernel: [    8.398449] dwmac1000: Master AXI performs any burst length
Thu Nov 12 20:20:18 2020 kern.info kernel: [    8.398497] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
Thu Nov 12 20:20:18 2020 kern.info kernel: [    8.402930] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Thu Nov 12 20:20:18 2020 kern.info kernel: [    8.411005] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Thu Nov 12 20:20:18 2020 kern.info kernel: [    8.419977] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
Thu Nov 12 20:20:18 2020 kern.info kernel: [    8.427983] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Thu Nov 12 20:20:18 2020 kern.info kernel: [    8.435504] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Thu Nov 12 20:20:18 2020 kern.notice kernel: [   12.626695] UBIFS (ubi0:1): Mounting in unauthenticated mode
Thu Nov 12 20:20:18 2020 kern.notice kernel: [   12.627905] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 164
Thu Nov 12 20:20:18 2020 kern.notice kernel: [   12.936033] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Thu Nov 12 20:20:18 2020 kern.notice kernel: [   12.936082] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Thu Nov 12 20:20:18 2020 kern.notice kernel: [   12.942981] UBIFS (ubi0:1): FS size: 29966336 bytes (28 MiB, 236 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
Thu Nov 12 20:20:18 2020 kern.notice kernel: [   12.952754] UBIFS (ubi0:1): reserved for root: 1415383 bytes (1382 KiB)
Thu Nov 12 20:20:18 2020 kern.notice kernel: [   12.963088] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 8931B579-257A-4616-9377-4EBA30E90C6A, small LPT model
Thu Nov 12 20:20:18 2020 user.info kernel: [   12.983506] mount_root: overlay filesystem has not been fully initialized yet
Thu Nov 12 20:20:18 2020 user.info kernel: [   12.983846] mount_root: switching to ubifs overlay
Thu Nov 12 20:20:18 2020 user.warn kernel: [   13.327651] urandom-seed: Seed file not found (/etc/urandom.seed)
Thu Nov 12 20:20:18 2020 kern.info kernel: [   13.385488] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
Thu Nov 12 20:20:18 2020 user.info kernel: [   13.446916] procd: - early -
Thu Nov 12 20:20:18 2020 user.info kernel: [   13.447111] procd: - watchdog -
Thu Nov 12 20:20:18 2020 user.info kernel: [   14.025072] procd: - watchdog -
Thu Nov 12 20:20:18 2020 user.info kernel: [   14.025689] procd: - ubus -
Thu Nov 12 20:20:18 2020 user.info kernel: [   14.185163] procd: - init -
Thu Nov 12 20:20:18 2020 user.info kernel: [   14.698780] urngd: v1.0.2 started.
Thu Nov 12 20:20:18 2020 user.info kernel: [   14.731909] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Nov 12 20:20:18 2020 kern.info kernel: [   14.739808] Loading modules backported from Linux version v5.8-0-gbcf876870b95
Thu Nov 12 20:20:18 2020 kern.info kernel: [   14.739832] Backport generated by backports.git v5.8-1-0-g79400d9e
Thu Nov 12 20:20:18 2020 kern.info kernel: [   14.754926] xt_time: kernel timezone is -0000
Thu Nov 12 20:20:18 2020 kern.info kernel: [   14.785169] PPP generic driver version 2.4.2
Thu Nov 12 20:20:18 2020 kern.info kernel: [   14.786097] NET: Registered protocol family 24
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   14.804480] ath10k_pci 0000:01:00.0: assign IRQ: got 35
Thu Nov 12 20:20:18 2020 kern.info kernel: [   14.804503] ath10k 5.4 driver, optimized for CT firmware, probing pci device: 0x40.
Thu Nov 12 20:20:18 2020 kern.err kernel: [   14.804569] ath10k_mac_create, priv_size: 868  hw: 0563494e  hw->priv: d6ed336d
Thu Nov 12 20:20:18 2020 kern.info kernel: [   14.812241] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   14.818405] ath10k_pci 0000:01:00.0: enabling bus mastering
Thu Nov 12 20:20:18 2020 kern.info kernel: [   14.818989] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Thu Nov 12 20:20:18 2020 kern.info kernel: [   15.944067] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
Thu Nov 12 20:20:18 2020 kern.info kernel: [   15.944106] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Thu Nov 12 20:20:18 2020 kern.info kernel: [   15.954537] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9980-fW-13-10af6a005 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 4a0fa880
Thu Nov 12 20:20:18 2020 kern.info kernel: [   16.025610] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 08fa09f2
Thu Nov 12 20:20:18 2020 kern.warn kernel: [   17.214899] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
Thu Nov 12 20:20:18 2020 kern.warn kernel: [   17.218003] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Thu Nov 12 20:20:18 2020 kern.warn kernel: [   17.220318] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
Thu Nov 12 20:20:18 2020 kern.info kernel: [   17.300815] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
Thu Nov 12 20:20:18 2020 kern.info kernel: [   17.300854] ath10k_pci 0000:01:00.0: wmi print 'free: 31080 iram: 23092 sram: 9596'
Thu Nov 12 20:20:18 2020 kern.info kernel: [   17.598372] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   17.695172] ath: EEPROM regdomain sanitized
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   17.695191] ath: EEPROM regdomain: 0x64
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   17.695202] ath: EEPROM indicates we should expect a direct regpair map
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   17.695224] ath: Country alpha2 being used: 00
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   17.695235] ath: Regpair used: 0x64
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   17.700236] ath10k_pci 0001:01:00.0: assign IRQ: got 37
Thu Nov 12 20:20:18 2020 kern.info kernel: [   17.700274] ath10k 5.4 driver, optimized for CT firmware, probing pci device: 0x40.
Thu Nov 12 20:20:18 2020 kern.err kernel: [   17.700402] ath10k_mac_create, priv_size: 868  hw: c2d04b42  hw->priv: 21a5082f
Thu Nov 12 20:20:18 2020 kern.info kernel: [   17.707602] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   17.714152] ath10k_pci 0001:01:00.0: enabling bus mastering
Thu Nov 12 20:20:18 2020 kern.info kernel: [   17.714675] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Thu Nov 12 20:20:18 2020 kern.info kernel: [   18.449176] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
Thu Nov 12 20:20:18 2020 kern.info kernel: [   18.449209] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Thu Nov 12 20:20:18 2020 kern.info kernel: [   18.459477] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9980-fW-13-10af6a005 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 4a0fa880
Thu Nov 12 20:20:18 2020 kern.info kernel: [   18.531268] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 08fa09f2
Thu Nov 12 20:20:18 2020 kern.warn kernel: [   19.721533] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
Thu Nov 12 20:20:18 2020 kern.warn kernel: [   19.724719] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Thu Nov 12 20:20:18 2020 kern.warn kernel: [   19.726958] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
Thu Nov 12 20:20:18 2020 kern.info kernel: [   19.805298] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
Thu Nov 12 20:20:18 2020 kern.info kernel: [   19.805359] ath10k_pci 0001:01:00.0: wmi print 'free: 31080 iram: 23092 sram: 9596'
Thu Nov 12 20:20:18 2020 kern.info kernel: [   20.079050] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   20.174331] ath: EEPROM regdomain sanitized
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   20.174350] ath: EEPROM regdomain: 0x64
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   20.174361] ath: EEPROM indicates we should expect a direct regpair map
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   20.174385] ath: Country alpha2 being used: 00
Thu Nov 12 20:20:18 2020 kern.debug kernel: [   20.174394] ath: Regpair used: 0x64
Thu Nov 12 20:20:18 2020 user.info kernel: [   20.188134] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Nov 12 20:20:18 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Nov 12 20:20:18 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: Connected to system UBus
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: started, version 2.82 cachesize 150
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: DNS service limited to local subnets
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: UBus support enabled: connected to system bus
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain test
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain onion
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain localhost
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain local
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain invalid
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain bind
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain lan
Thu Nov 12 20:20:18 2020 daemon.warn dnsmasq[859]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: read /etc/hosts - 4 addresses
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Nov 12 20:20:18 2020 authpriv.info dropbear[921]: Not backgrounding
Thu Nov 12 20:20:19 2020 daemon.notice wpa_supplicant[1030]: Successfully initialized wpa_supplicant
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: 8021ad
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: 8021q
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: macvlan
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: veth
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: bridge
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: Network device
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: tunnel
Thu Nov 12 20:20:21 2020 kern.info kernel: [   25.425459] dwmac1000: Master AXI performs any burst length
Thu Nov 12 20:20:21 2020 kern.info kernel: [   25.425509] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
Thu Nov 12 20:20:21 2020 kern.info kernel: [   25.429857] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Thu Nov 12 20:20:21 2020 kern.info kernel: [   25.438023] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Thu Nov 12 20:20:21 2020 kern.info kernel: [   25.446946] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
Thu Nov 12 20:20:21 2020 kern.info kernel: [   25.454066] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Thu Nov 12 20:20:21 2020 kern.info kernel: [   25.457497] br-lan: port 1(eth1.1) entered blocking state
Thu Nov 12 20:20:21 2020 kern.info kernel: [   25.471284] br-lan: port 1(eth1.1) entered disabled state
Thu Nov 12 20:20:21 2020 kern.info kernel: [   25.476838] device eth1.1 entered promiscuous mode
Thu Nov 12 20:20:21 2020 kern.info kernel: [   25.481921] device eth1 entered promiscuous mode
Thu Nov 12 20:20:21 2020 kern.info kernel: [   25.488315] br-lan: port 1(eth1.1) entered blocking state
Thu Nov 12 20:20:21 2020 kern.info kernel: [   25.491389] br-lan: port 1(eth1.1) entered forwarding state
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'lan' is enabled
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'lan' is setting up now
Thu Nov 12 20:20:21 2020 daemon.debug dnsmasq[859]: listening on br-lan(#7): 192.168.50.1 port 53
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'lan' is now up
Thu Nov 12 20:20:21 2020 daemon.notice netifd: bridge 'br-lan' link is up
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Nov 12 20:20:21 2020 daemon.notice netifd: VLAN 'eth1.1' link is up
Thu Nov 12 20:20:21 2020 daemon.debug dnsmasq[859]: listening on lo(#1): 127.0.0.1 port 53
Thu Nov 12 20:20:21 2020 daemon.debug dnsmasq[859]: listening on lo(#1): ::1 port 53
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'loopback' is enabled
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'loopback' is now up
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Network device 'eth1' link is up
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Network device 'lo' link is up
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Nov 12 20:20:22 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Nov 12 20:20:22 2020 daemon.notice procd: /etc/rc.d/S99bootcount: Boot count sucessfully reset to zero.
Thu Nov 12 20:20:22 2020 daemon.info procd: - init complete -
Thu Nov 12 20:20:22 2020 daemon.info urandom_seed[1487]: Seed saved (/etc/urandom.seed)
Thu Nov 12 20:20:22 2020 kern.info kernel: [   26.474577] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Thu Nov 12 20:20:22 2020 kern.info kernel: [   26.475583] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Nov 12 20:20:22 2020 daemon.err odhcpd[1138]: Failed to send to ff02::1%lan@br-lan (Address not available)
Thu Nov 12 20:20:24 2020 daemon.debug dnsmasq[859]: listening on br-lan(#7): fd5c:7678:93f2::1 port 53
Thu Nov 12 20:20:24 2020 daemon.debug dnsmasq[859]: listening on eth1(#3): fe80::9ceb:13ff:fe3b:be2%eth1 port 53
Thu Nov 12 20:20:24 2020 daemon.debug dnsmasq[859]: listening on br-lan(#7): fe80::1691:82ff:fe83:c98%br-lan port 53
Thu Nov 12 20:20:25 2020 authpriv.info dropbear[1589]: Child connection from 192.168.50.218:55112
Thu Nov 12 20:20:25 2020 authpriv.notice dropbear[1589]: Auth succeeded with blank password for 'root' from 192.168.50.218:55112
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[859]: exiting on receipt of SIGTERM
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: Connected to system UBus
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: started, version 2.82 cachesize 150
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: DNS service limited to local subnets
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: UBus support enabled: connected to system bus
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq-dhcp[1639]: DHCP, IP range 192.168.50.100 -- 192.168.50.249, lease time 12h
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain test
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain onion
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain localhost
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain local
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain invalid
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain bind
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain lan
Thu Nov 12 20:20:27 2020 daemon.warn dnsmasq[1639]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: read /etc/hosts - 4 addresses
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq-dhcp[1639]: read /etc/ethers - 0 addresses
Thu Nov 12 20:20:32 2020 daemon.info dnsmasq[1639]: read /etc/hosts - 4 addresses
Thu Nov 12 20:20:32 2020 daemon.info dnsmasq[1639]: read /tmp/hosts/odhcpd - 1 addresses
Thu Nov 12 20:20:32 2020 daemon.info dnsmasq[1639]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Nov 12 20:20:32 2020 daemon.info dnsmasq-dhcp[1639]: read /etc/ethers - 0 addresses
# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 16:6b:c5:27:96:cf brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether 9e:eb:13:3b:0b:e2 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::9ceb:13ff:fe3b:be2/64 scope link 
       valid_lft forever preferred_lft forever
5: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 14:91:82:83:0c:99 brd ff:ff:ff:ff:ff:ff
6: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 14:91:82:83:0c:9a brd ff:ff:ff:ff:ff:ff
7: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether 14:91:82:83:0c:98 brd ff:ff:ff:ff:ff:ff
    inet 192.168.50.1/24 brd 192.168.50.255 scope global br-lan
       valid_lft forever preferred_lft forever
    inet6 fd5c:7678:93f2::1/60 scope global 
       valid_lft forever preferred_lft forever
    inet6 fe80::1691:82ff:fe83:c98/64 scope link 
       valid_lft forever preferred_lft forever
8: eth1.1@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether 14:91:82:83:0c:98 brd ff:ff:ff:ff:ff:ff
# cat /etc/config/network 

config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'fd5c:7678:93f2::/48'

config interface 'lan'
	option type 'bridge'
	option ifname 'eth1.1'
	option proto 'static'
	option ipaddr '192.168.50.1'
	option netmask '255.255.255.0'
	option ip6assign '60'

config device 'lan_eth1_1_dev'
	option name 'eth1.1'
	option macaddr 'xxxxx'

config interface 'wan'
	option ifname 'eth0.2'
	option proto 'dhcp'

config device 'wan_eth0_2_dev'
	option name 'eth0.2'
	option macaddr 'xxxxx'

config interface 'wan6'
	option ifname 'eth0.2'
	option proto 'dhcpv6'

config switch
	option name 'switch0'
	option reset '1'
	option enable_vlan '1'

config switch_vlan
	option device 'switch0'
	option vlan '1'
	option ports '2 3 4 5 6t'

config switch_vlan
	option device 'switch0'
	option vlan '2'
	option ports '1 0t'


12.11.20203444Base systemBug ReportVery LowLow dwc3 ff600000.dwc3: Failed to get clk 'ref': -2TrunkUnconfirmed Task Description

- NanoPi R2S
- openwrt master latest

Kernel log
[ 0.200674] dwc3 ff600000.dwc3: Failed to get clk ‘ref’: -2
[ 0.202048] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
[ 0.202890] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
[ 0.218328] dwc2 ff580000.usb: DWC OTG Controller
[ 0.218785] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
[ 0.219454] dwc2 ff580000.usb: irq 27, io mem 0xff580000


11.11.20203442Base systemBug ReportVery LowLowBuild fails on WSL / WSL2TrunkUnconfirmed Task Description

* Install WSL2 on Windows 10
* Install Ubuntu
* Confirm `$PATH` has paths with spaces:
```
$ echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/mnt/c/Program Files/WindowsApps/CanonicalGroupLimited.UbuntuonWindows_2004.2020.812.0_x6479rhkp1fndgsc:/mnt/c/WINDOWS/system32:/mnt/c/WINDOWS:/mnt/c/WINDOWS/System32/Wbem:/mnt/c/WINDOWS/System32/WindowsPowerShell/v1.0/:/mnt/c/WINDOWS/System32/OpenSSH/:/mnt/c/Program Files/PuTTY/:/mnt/c/Users/Owner/AppData/Local/Microsoft/WindowsApps:/mnt/c/Users/Owner/AppData/Local/Programs/Microsoft VS Code/bin:/snap/bin
```
Follow https://github.com/openwrt/openwrt/blob/master/README.md directions to prep environment and build openwrt After many minutes/hours of building, observe `make` fails due to an issue with path: This was the command:
find /home/ubuntu/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/root-ipq806x/ -mindepth 1 -execdir touch -hcd “@1587126718” “{}” + The was the error:
find: The relative path ‘Files/WindowsApps/CanonicalGroupLimited.UbuntuonWindows_1804.2020.5.0_x64
79rhkp1fndgsc’ is included in the PATH environment variable, which is insecure in combination with the -execdir action of find. Please remove that entry from $PATH

Workarounds:
Remove all paths from $PATH that have spaces

Other links:
https://github.com/microsoft/WSL/discussions/5099 https://github.com/microsoft/WSL/issues/6208

10.11.20203441Base systemBug ReportVery LowLowMenuconfig misbehaviour: wpad-mesh-wolfssl disappears d...openwrt-19.07Unconfirmed Task Description

Premise:

I am on OpenWrt 19.07.4 and menuconfig is behaving weirdly in a case.
I was trying to document how to select wpad-mesh-wolfssl and deselect wpad-basic for LibreMesh compilation and found something that looks like a bug in some Config.in file used by menuconfig.
Original bug reported on LibreMesh issues list here:
https://github.com/libremesh/lime-web/issues/125

Getting there:

Selecting at the same time wpad-basic and wpad-mesh-wolfssl causes a clash of files installation in the compilation process. For this reason the deselection of wpad-basic has been suggested in LibreMesh compilation instructions.

wpad-mesh-wolfssl can be selected in menuconfig and wpad-basic deselected, until here everything ok.

Issue:

Then when closing and opening again menuconfig, wpad-mesh-wolfssl is not visible.

Screenshot: https://user-images.githubusercontent.com/1329018/98670652-4877ca80-2353-11eb-9d7f-96b5c5d718fd.png

But when wpad-basic (or something else) is selected, wpad-mesh-wolfssl appears and is actually selected (as it should be).

Screenshot: https://user-images.githubusercontent.com/1329018/98670749-7230f180-2353-11eb-9d44-2d6a9bcb3c78.png

The wpad-mesh-wolfssl package is categorized as being inside wpad-mesh-openssl, which makes no sense.

Screenshot: https://user-images.githubusercontent.com/1329018/98670837-9b518200-2353-11eb-8cf0-f490182b4ee2.png

And all of this happens even if the definitions of wpad-basic, wpad-mesh-openssl and wpad-mesh-wolfssl are substantially identical (extracted from https://github.com/openwrt/openwrt/blob/openwrt-19.07/package/network/services/hostapd/Makefile ):

wpad-basic

[identical part removed]
VARIANT:=wpad-basic

wpad-mesh-openssl

[identical part removed]
DEPENDS+=@PACKAGE_kmod-cfg80211 @(!TARGET_uml||BROKEN)
PROVIDES+=wpa-supplicant-mesh wpad-mesh
DEPENDS+=+libopenssl
VARIANT:=wpad-mesh-openssl

wpad-mesh-wolfssl

[identical part removed]
DEPENDS+=@PACKAGE_kmod-cfg80211 @(!TARGET_uml||BROKEN)
PROVIDES+=wpa-supplicant-mesh wpad-mesh
DEPENDS+=+libwolfssl
VARIANT:=wpad-mesh-wolfssl

This looks like a bug in some of the Config.in files used by make menuconfig.
Just to support this, I exchanged the order in which wpad-mesh-openssl and wpad-mesh-wolfssl are defined in `tmp/.config-package.in` and now wpad-mesh-wolfssl and wpad-mesh-openssl are at the same hierarchical level. There’s clearly a bug around.

Thanks!


09.11.20203440Base systemBug ReportVery LowMedium3G stick not found on rebootopenwrt-19.07Unconfirmed Task Description

Hi !

I’m using a Huwei E160E 3G dongle with Openwrt 19.07.4. I configured 3G connexion following this guide : https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle

All works OK as long as I do not reboot the router. After reboot 3g interface says “Error : network device is not present”

I have to ssh and do network restart to get it working again. As a workaround I added sleep 30; /etc/init.d/network restart to /etc/rc.local

According to dmesg I would think the 3g stick is detected after networking start. The log is in attachment.

I tested on two routers : Gl.inet AR-150 and TP-Link Tl-WR3600. Both had the same behavior.

Please let me know if I can help.

Kind Regards,

Ed.

 


08.11.20203439Base systemBug ReportVery LowHighCan't connect for WPA2-Enterprise from Windows system.openwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

Device problem occurs on

I can’t connect to network wifi (WPA2-Enterprise) from Windows system. I can connect from Linux and IOS systems.
I tested packages: wpad-mesh-openssl, wpad-openssl, wpad-wolfssl and wpad.

Software versions of OpenWrt/LEDE release, packages, etc

cat /etc/openwrt_release
DISTRIB_ID=’OpenWrt’ DISTRIB_RELEASE=’19.07-SNAPSHOT’ DISTRIB_REVISION=’r11201-f5afa593e7’ DISTRIB_TARGET=’ath79/generic’ DISTRIB_ARCH=’mips_24kc’ DISTRIB_DESCRIPTION=’OpenWrt 19.07-SNAPSHOT r11201-f5afa593e7’ DISTRIB_TAINTS=’’

opkg list-installed
adblock - 4.0.6-3
base-files - 204.2-r11201-f5afa593e7
blkid - 2.34-1
block-mount - 2020-05-12-84269037-1
busybox - 1.30.1-6
ca-bundle - 20200601-1
cgi-io - 19
chat - 2.4.7.git-2019-05-25-3
comgt - 0.32-32
comgt-directip - 0.32-32
comgt-ncm - 0.32-32
coreutils - 8.30-2
coreutils-sort - 8.30-2
ddns-scripts - 2.7.8-13
dnsmasq - 2.80-16.1
dropbear - 2019.78-2
e2fsprogs - 1.44.5-2
ekooneplstat - 20150706
etherwake - 1.09-4
firewall - 2019-11-22-8174814a-2
fstools - 2020-05-12-84269037-1
fwtool - 2
getrandom - 2019-06-16-4df34a4d-3
hostapd-common - 2019-08-08-ca8c2bd2-4
ip-tiny - 5.0.0-2.1
ipset - 7.3-1
iptables - 1.8.3-1
iw - 5.0.1-1
iwinfo - 2019-10-16-07315b6f-1
jshn - 2020-05-25-66195aee-1
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 4.14.195-1-38fe082385c94876bc5af35c67d5656a
kmod-ath - 4.14.195+4.19.137-1-2
kmod-ath9k - 4.14.195+4.19.137-1-2
kmod-ath9k-common - 4.14.195+4.19.137-1-2
kmod-cfg80211 - 4.14.195+4.19.137-1-2
kmod-crypto-aead - 4.14.195-1
kmod-crypto-ccm - 4.14.195-1
kmod-crypto-cmac - 4.14.195-1
kmod-crypto-crc32c - 4.14.195-1
kmod-crypto-ctr - 4.14.195-1
kmod-crypto-des - 4.14.195-1
kmod-crypto-ecb - 4.14.195-1
kmod-crypto-gcm - 4.14.195-1
kmod-crypto-gf128 - 4.14.195-1
kmod-crypto-ghash - 4.14.195-1
kmod-crypto-hash - 4.14.195-1
kmod-crypto-hmac - 4.14.195-1
kmod-crypto-iv - 4.14.195-1
kmod-crypto-manager - 4.14.195-1
kmod-crypto-md4 - 4.14.195-1
kmod-crypto-md5 - 4.14.195-1
kmod-crypto-null - 4.14.195-1
kmod-crypto-pcompress - 4.14.195-1
kmod-crypto-rng - 4.14.195-1
kmod-crypto-seqiv - 4.14.195-1
kmod-crypto-sha256 - 4.14.195-1
kmod-crypto-sha512 - 4.14.195-1
kmod-crypto-wq - 4.14.195-1
kmod-fs-ext4 - 4.14.195-1
kmod-fs-ksmbd - 4.14.195+3.1.3-1
kmod-fs-vfat - 4.14.195-1
kmod-fuse - 4.14.195-1
kmod-gpio-button-hotplug - 4.14.195-3
kmod-ipt-conntrack - 4.14.195-1
kmod-ipt-core - 4.14.195-1
kmod-ipt-ipset - 4.14.195-1
kmod-ipt-nat - 4.14.195-1
kmod-ipt-offload - 4.14.195-1
kmod-ipt-raw - 4.14.195-1
kmod-lib-crc-ccitt - 4.14.195-1
kmod-lib-crc16 - 4.14.195-1
kmod-lib-textsearch - 4.14.195-1
kmod-mac80211 - 4.14.195+4.19.137-1-2
kmod-mii - 4.14.195-1
kmod-nf-conntrack - 4.14.195-1
kmod-nf-conntrack6 - 4.14.195-1
kmod-nf-flow - 4.14.195-1
kmod-nf-ipt - 4.14.195-1
kmod-nf-ipt6 - 4.14.195-1
kmod-nf-nat - 4.14.195-1
kmod-nf-nathelper-extra - 4.14.195-1
kmod-nf-reject - 4.14.195-1
kmod-nf-reject6 - 4.14.195-1
kmod-nfnetlink - 4.14.195-1
kmod-nls-base - 4.14.195-1
kmod-nls-cp437 - 4.14.195-1
kmod-nls-iso8859-1 - 4.14.195-1
kmod-nls-utf8 - 4.14.195-1
kmod-phy-ath79-usb - 4.14.195-1
kmod-ppp - 4.14.195-1
kmod-pppoe - 4.14.195-1
kmod-pppox - 4.14.195-1
kmod-scsi-core - 4.14.195-1
kmod-slhc - 4.14.195-1
kmod-tun - 4.14.195-1
kmod-udptunnel4 - 4.14.195-1
kmod-udptunnel6 - 4.14.195-1
kmod-usb-acm - 4.14.195-1
kmod-usb-core - 4.14.195-1
kmod-usb-ehci - 4.14.195-1
kmod-usb-ledtrig-usbport - 4.14.195-1
kmod-usb-net - 4.14.195-1
kmod-usb-net-cdc-ether - 4.14.195-1
kmod-usb-net-cdc-mbim - 4.14.195-1
kmod-usb-net-cdc-ncm - 4.14.195-1
kmod-usb-net-huawei-cdc-ncm - 4.14.195-1
kmod-usb-net-qmi-wwan - 4.14.195-1
kmod-usb-net-rndis - 4.14.195-1
kmod-usb-net-sierrawireless - 4.14.195-1
kmod-usb-serial - 4.14.195-1
kmod-usb-serial-option - 4.14.195-1
kmod-usb-serial-qualcomm - 4.14.195-1
kmod-usb-serial-sierrawireless - 4.14.195-1
kmod-usb-serial-wwan - 4.14.195-1
kmod-usb-storage - 4.14.195-1
kmod-usb-storage-uas - 4.14.195-1
kmod-usb-wdm - 4.14.195-1
kmod-usb2 - 4.14.195-1
kmod-wireguard - 4.14.195+1.0.20200611-1
ksmbd-server - 3.2.1-1
ksmbd-utils - 3.2.1-1
libblkid1 - 2.34-1
libblobmsg-json - 2020-05-25-66195aee-1
libc - 1.1.24-2
libcomerr0 - 1.44.5-2
libext2fs2 - 1.44.5-2
libgcc1 - 7.5.0-2
libip4tc2 - 1.8.3-1
libip6tc2 - 1.8.3-1
libipset13 - 7.3-1
libiwinfo-lua - 2019-10-16-07315b6f-1
libiwinfo20181126 - 2019-10-16-07315b6f-1
libjson-c2 - 0.12.1-3.1
libjson-script - 2020-05-25-66195aee-1
liblua5.1.5 - 5.1.5-3
liblucihttp-lua - 2019-07-05-a34a17d5-1
liblucihttp0 - 2019-07-05-a34a17d5-1
liblzo2 - 2.10-2
libmbedtls12 - 2.16.8-1
libmnl0 - 1.0.4-2
libncurses6 - 6.1-5
libnl-core200 - 3.4.0-2
libnl-genl200 - 3.4.0-2
libnl-tiny - 0.1-5
libopenssl-conf - 1.1.1g-1
libopenssl1.1 - 1.1.1g-1
libpcap1 - 1.9.1-2.1
libpcre - 8.43-1
libpthread - 1.1.24-2
librt - 1.1.24-2
libss2 - 1.44.5-2
libubox20191228 - 2020-05-25-66195aee-1
libubus-lua - 2019-12-27-041c9d1c-1
libubus20191227 - 2019-12-27-041c9d1c-1
libuci20130104 - 2019-09-01-415f9e48-3
libuclient20160123 - 2020-06-17-51e16ebf-1
libusb-1.0-0 - 1.0.22-2
libustream-openssl20150806 - 2020-03-13-40b563b1-1
libuuid1 - 2.34-1
libwolfssl24 - 4.5.0-stable-1
libxtables12 - 1.8.3-1
logd - 2019-06-16-4df34a4d-3
lua - 5.1.5-3
luci - git-20.247.75781-0d0ab01-1
luci-app-adblock - git-20.247.75781-0d0ab01-1
luci-app-commands - git-20.247.75781-0d0ab01-1
luci-app-ddns - 2.4.9-7
luci-app-ekooneplstat - 20190629
luci-app-firewall - git-20.247.75781-0d0ab01-1
luci-app-ksmbd - git-20.247.75781-0d0ab01-1
luci-app-openvpn - git-20.247.75781-0d0ab01-1
luci-app-opkg - git-20.247.75781-0d0ab01-1
luci-app-p910nd - git-20.247.75781-0d0ab01-1
luci-app-vpnbypass - git-20.247.75781-0d0ab01-19
luci-app-wifischedule - git-20.247.75781-0d0ab01-1
luci-app-wireguard - git-20.247.75781-0d0ab01-1
luci-app-wol - git-20.247.75781-0d0ab01-1
luci-base - git-20.247.75781-0d0ab01-1
luci-compat - git-20.247.75781-0d0ab01-1
luci-i18n-adblock-en - git-20.247.75781-0d0ab01-1
luci-i18n-adblock-pl - git-20.247.75781-0d0ab01-1
luci-i18n-base-en - git-20.247.75781-0d0ab01-1
luci-i18n-base-pl - git-20.247.75781-0d0ab01-1
luci-i18n-commands-en - git-20.247.75781-0d0ab01-1
luci-i18n-commands-pl - git-20.247.75781-0d0ab01-1
luci-i18n-ddns-en - 2.4.9-7
luci-i18n-ddns-pl - 2.4.9-7
luci-i18n-firewall-en - git-20.247.75781-0d0ab01-1
luci-i18n-firewall-pl - git-20.247.75781-0d0ab01-1
luci-i18n-ksmbd-en - git-20.247.75781-0d0ab01-1
luci-i18n-ksmbd-pl - git-20.247.75781-0d0ab01-1
luci-i18n-openvpn-en - git-20.247.75781-0d0ab01-1
luci-i18n-openvpn-pl - git-20.247.75781-0d0ab01-1
luci-i18n-opkg-en - git-20.247.75781-0d0ab01-1
luci-i18n-opkg-pl - git-20.247.75781-0d0ab01-1
luci-i18n-p910nd-en - git-20.247.75781-0d0ab01-1
luci-i18n-p910nd-pl - git-20.247.75781-0d0ab01-1
luci-i18n-vpnbypass-en - git-20.247.75781-0d0ab01-19
luci-i18n-vpnbypass-pl - git-20.247.75781-0d0ab01-19
luci-i18n-wifischedule-en - git-20.247.75781-0d0ab01-1
luci-i18n-wifischedule-pl - git-20.247.75781-0d0ab01-1
luci-i18n-wireguard-en - git-20.247.75781-0d0ab01-1
luci-i18n-wireguard-pl - git-20.247.75781-0d0ab01-1
luci-i18n-wol-en - git-20.247.75781-0d0ab01-1
luci-i18n-wol-pl - git-20.247.75781-0d0ab01-1
luci-lib-ip - git-20.247.75781-0d0ab01-1
luci-lib-ipkg - git-20.247.75781-0d0ab01-1
luci-lib-jsonc - git-20.247.75781-0d0ab01-1
luci-lib-nixio - git-20.247.75781-0d0ab01-1
luci-mod-admin-full - git-20.247.75781-0d0ab01-1
luci-mod-network - git-20.247.75781-0d0ab01-1
luci-mod-status - git-20.247.75781-0d0ab01-1
luci-mod-system - git-20.247.75781-0d0ab01-1
luci-proto-3g - git-20.247.75781-0d0ab01-1
luci-proto-ipv6 - git-20.247.75781-0d0ab01-1
luci-proto-ncm - git-20.247.75781-0d0ab01-1
luci-proto-ppp - git-20.247.75781-0d0ab01-1
luci-proto-qmi - git-20.247.75781-0d0ab01-1
luci-proto-relay - git-20.247.75781-0d0ab01-1
luci-proto-wireguard - git-20.247.75781-0d0ab01-1
luci-ssl-openssl - git-20.247.75781-0d0ab01-1
luci-theme-bootstrap - git-20.247.75781-0d0ab01-1
mbedtls-util - 2.16.8-1
mtd - 24
netifd - 2019-08-05-5e02f944-1
ntfs-3g - 2017.3.23-2-fuseint
odhcpd-ipv6only - 2020-05-03-49e4949c-3
openssh-sftp-server - 8.0p1-1
openssl-util - 1.1.1g-1
openvpn-easy-rsa - 3.0.4-1
openvpn-openssl - 2.4.7-2
openwrt-keyring - 2019-07-25-8080ef34-1
opkg - 2020-05-07-f2166a89-1
p910nd - 0.97-8
port-mirroring - 1.4.4-2
ppp - 2.4.7.git-2019-05-25-3
ppp-mod-pppoe - 2.4.7.git-2019-05-25-3
procd - 2020-03-07-09b9bd82-1
relayd - 2020-04-25-f4d759be-1
rpcd - 2020-05-26-67c8a3fd-1
rpcd-mod-file - 2020-05-26-67c8a3fd-1
rpcd-mod-iwinfo - 2020-05-26-67c8a3fd-1
rpcd-mod-luci - 20191114
rpcd-mod-rrdns - 20170710
screen - 4.8.0-1
swconfig - 12
sysinfo - 20200403
terminfo - 6.1-5
uboot-envtools - 2018.03-3
ubox - 2019-06-16-4df34a4d-3
ubus - 2019-12-27-041c9d1c-1
ubusd - 2019-12-27-041c9d1c-1
uci - 2019-09-01-415f9e48-3
uclient-fetch - 2020-06-17-51e16ebf-1
uhttpd - 2020-03-13-975dce23-1
umbim - 2019-03-11-24f9dc71-1
uqmi - 2019-06-27-1965c713-7
urandom-seed - 1.0-1
urngd - 2020-01-21-c7f7b6b6-1
usb-modeswitch - 2017-12-19-f40f84c2-2
usign - 2020-05-23-f1f65026-1
vpnbypass - 1.3.1-7
wget - 1.20.3-4
wifischedule - 1-2
wireguard-tools - 1.0.20191226-1
wireless-regdb - 2019.06.03-1
wpad-mesh-openssl - 2019-08-08-ca8c2bd2-4
wsdd2 - 2020-05-06-671d040c-1
wwan - 2014-07-17-1
xinetd - 2.3.15-5
zlib - 1.2.11-3

cat /etc/config/wireless
config wifi-device ‘radio1’

  option type 'mac80211'
  option channel '36'
  option hwmode '11a'
  option path 'pci0000:00/0000:00:00.0'
  option htmode 'HT20'
  option country 'PL'


config wifi-iface ‘default_radio1’

  option device 'radio1'
  option network 'lan'
  option mode 'ap'
  option auth_server '192.168.1.X'
  option auth_port '1812'
  option auth_secret password
  option ssid 'name'
  option encryption 'wpa2+ccmp'
  option wpa_disable_eapol_key_retries '1'
  option ieee80211w '2'
  option disassoc_low_ack '0'

Steps to reproduce

Always when I tried connect to wireless network from Windows system I can’t connect to network and I saw below logs:

logread | grep wlan1
Sun Nov 8 21:54:54 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.11: authenticated
Sun Nov 8 21:54:54 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.11: associated (aid 2)
Sun Nov 8 21:54:54 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-STARTED MAC ADDRESS
Sun Nov 8 21:54:54 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
Sun Nov 8 21:54:55 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-STARTED MAC ADDRESS
Sun Nov 8 21:54:55 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
Sun Nov 8 21:54:56 2020 daemon.warn hostapd: wlan1: STA MAC ADDRESS IEEE 802.1X: could not extract EAP-Message from RADIUS message
Sun Nov 8 21:54:56 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-FAILURE2 MAC ADDRESS
Sun Nov 8 21:54:56 2020 daemon.warn hostapd: wlan1: STA MAC ADDRESS IEEE 802.1X: authentication failed - EAP type: 0 (unknown)
Sun Nov 8 21:54:56 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.1X: Supplicant used different EAP type: 1 (Identity)
Sun Nov 8 21:55:01 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.11: deauthenticated due to local deauth request
Sun Nov 8 21:55:03 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.11: authenticated
Sun Nov 8 21:55:03 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.11: associated (aid 2)
Sun Nov 8 21:55:03 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-STARTED MAC ADDRESS
Sun Nov 8 21:55:03 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
Sun Nov 8 21:55:03 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-STARTED MAC ADDRESS
Sun Nov 8 21:55:03 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
Sun Nov 8 21:55:04 2020 daemon.warn hostapd: wlan1: STA MAC ADDRESS IEEE 802.1X: could not extract EAP-Message from RADIUS message
Sun Nov 8 21:55:04 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-FAILURE2 MAC ADDRESS
Sun Nov 8 21:55:04 2020 daemon.warn hostapd: wlan1: STA MAC ADDRESS IEEE 802.1X: authentication failed - EAP type: 0 (unknown)
Sun Nov 8 21:55:04 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.1X: Supplicant used different EAP type: 1 (Identity)
Sun Nov 8 21:55:09 2020 daemon.info hostapd: wlan1: STA MAC ADDRESS IEEE 802.11: deauthenticated due to local deauth request

This problem occurred after upgrade openwrt system.

07.11.20203438Base systemBug ReportVery LowLowWiTi Board reboot failureTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on WiTi Board 512MB
- Software versions of OpenWrt/LEDE release, packages, etc. Al versions
- Steps to reproduce = Reboot from luci or command line

Issue with device not rebooting when instructed and hanging. At the moment i have to edit the following patch.

304-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch

From

--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1103,6 +1103,7 @@ static const struct flash_info spi_nor_i
 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
@@ -1272,11 +1273,12 @@ static const struct flash_info spi_nor_i
 	{ },
 };
 

To

--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1103,6 +1103,7 @@ static const struct flash_info spi_nor_i
 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_READ_OP) },
+	{ "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
@@ -1272,11 +1273,12 @@ static const struct flash_info spi_nor_i
 	{ },
 };

Can this be fixed/added to source?

07.11.20203437Base systemBug ReportVery LowLowWiTi Board flash sizeTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on WiTi Board 512MB
- Software versions of OpenWrt/LEDE release, packages, etc. All release versions
- Steps to reproduce = None

 

Witi Board 512MB version has a flash size of 32mb, there maybe some 512mb versions with 16mb flash but the 2 i have are both 32mb spi flash. Can someone add this to source? At the moment i have to edit the .dtsi file and mt7621.mk file to reflect the correct image and flash size.

WITI.dtsi

from

			partition@50000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x50000 0xfb0000>;

to

			partition@50000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x50000 0x1fb0000>;

mt7621.mk

From

define Device/mqmaker_witi-512m
  DTS := WITI-512M
  IMAGE_SIZE := $(ralink_default_fw_size_16M)
  DEVICE_TITLE := MQmaker WiTi (512MB RAM)
  DEVICE_PACKAGES := \
	kmod-ata-core kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620 kmod-usb3 \
	kmod-usb-ledtrig-usbport wpad-basic
endef
TARGET_DEVICES += mqmaker_witi-512m

To

define Device/mqmaker_witi-512m
  DTS := WITI-512M
  IMAGE_SIZE := $(ralink_default_fw_size_32M)
  DEVICE_TITLE := MQmaker WiTi (512MB RAM)
  DEVICE_PACKAGES := \
	kmod-ata-core kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620 kmod-usb3 \
	kmod-usb-ledtrig-usbport wpad-basic
endef
TARGET_DEVICES += mqmaker_witi-512m

Thank you

05.11.20203435Base systemBug ReportVery LowLowRK3328 rk_gmac-dwmac ff540000.ethernet: phy regulator ...TrunkUnconfirmed Task Description

- OpenWrt master latest
[ 0.201033] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available yet, deferred probing
[ 0.203284] dwc3 ff600000.dwc3: Failed to get clk ‘ref’: -2

 


02.11.20203424Base systemBug ReportVery LowLowError loading shared library libmount.so.1: No such fil...TrunkUnconfirmed Task Description

root@OpenWrt# lsblk
Error loading shared library libmount.so.1: No such file or directory (needed by /usr/bin/lsblk)
Error relocating /usr/bin/lsblk: mnt_free_iter: symbol not found
Error relocating /usr/bin/lsblk: mnt_new_iter: symbol not found
Error relocating /usr/bin/lsblk: mnt_table_find_srcpath: symbol not found
Error relocating /usr/bin/lsblk: mnt_table_find_devno: symbol not found
Error relocating /usr/bin/lsblk: mnt_new_table: symbol not found
Error relocating /usr/bin/lsblk: mnt_table_set_cache: symbol not found
Error relocating /usr/bin/lsblk: mnt_unref_table: symbol not found
Error relocating /usr/bin/lsblk: mnt_table_parse_swaps: symbol not found
Error relocating /usr/bin/lsblk: mnt_fs_get_target: symbol not found
Error relocating /usr/bin/lsblk: mnt_fs_match_source: symbol not found
Error relocating /usr/bin/lsblk: mnt_table_set_parser_errcb: symbol not found
Error relocating /usr/bin/lsblk: mnt_unref_cache: symbol not found
Error relocating /usr/bin/lsblk: mnt_init_debug: symbol not found
Error relocating /usr/bin/lsblk: mnt_table_set_iter: symbol not found
Error relocating /usr/bin/lsblk: mnt_fs_get_root: symbol not found
Error relocating /usr/bin/lsblk: mnt_new_cache: symbol not found
Error relocating /usr/bin/lsblk: mnt_table_parse_mtab: symbol not found
Error relocating /usr/bin/lsblk: mnt_table_next_fs: symbol not found


01.11.20203423Base systemBug ReportVery LowHighNo dependencies installed and configuredTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

root@OpenWrt:~# opkg install luci
Installing luci (git-20.304.73778-5a485f8) to root...
Downloading https://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-20.304.73778-5a485f8_all.ipk Configuring luci.
root@OpenWrt:~# opkg list-installed | grep luci
luci - git-20.304.73778-5a485f8

On a fresh install, no dependencies installed and configured, leading to an non functional Luci instance.

On the lastest snapshots, with my Linksys EA7500 V1.

01.11.20203422Base systemBug ReportVery LowMediumopkg_conf_parse_file: Duplicate src declarationTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

# opkg update

Collected errors:
* opkg_conf_parse_file: Duplicate src declaration (openwrt_kmods https://downlo ads.openwrt.org/snapshots/targets/ipq806x/generic/kmods/5.4.73-1-24a37ca31562e56 7dd0b002baba9b704)

# vi /etc/opkg/distfeeds.conf

src/gz openwrt_core https://downloads.openwrt.org/snapshots/targets/ipq806x/generic/packages src/gz openwrt_kmods https://downloads.openwrt.org/snapshots/targets/ipq806x/generic/kmods/5.4.73-1-24a37ca31562e567dd0b002baba9b704 src/gz openwrt_base https://downloads.openwrt.org/snapshots/packages/arm_cortex-a15_neon-vfpv4/base src/gz openwrt_kmods https://downloads.openwrt.org/snapshots/targets/ipq806x/generic/kmods/5.4.73-1-24a37ca31562e567dd0b002baba9b704 src/gz openwrt_freifunk https://downloads.openwrt.org/snapshots/packages/arm_cortex-a15_neon-vfpv4/freifunk src/gz openwrt_luci https://downloads.openwrt.org/snapshots/packages/arm_cortex-a15_neon-vfpv4/luci src/gz openwrt_packages https://downloads.openwrt.org/snapshots/packages/arm_cortex-a15_neon-vfpv4/packages src/gz openwrt_routing https://downloads.openwrt.org/snapshots/packages/arm_cortex-a15_neon-vfpv4/routing src/gz openwrt_telephony https://downloads.openwrt.org/snapshots/packages/arm_cortex-a15_neon-vfpv4/telephony

uname -a
Linux OpenWrt 5.4.73 #0 SMP Sun Nov 1 13:44:06 2020 armv7l GNU/Linux

01.11.20203421Base systemBug ReportVery LowMediumnetifd: tries to claim VAP device before it's createdTrunkUnconfirmed Task Description

This is obviously a general issue but the problem was reported on Netgear RT6220. There are two 5 GHz (radio1, non-DFS channel) VAPs and five VAPs in total. Netifd debug log is attached.

When netifd tries to claim second 5 GHz VAP (wl1-gst) it fails with error message:

device_claim(447): claim Network device wl1-gst failed: -1

It seems that the second VAP had not been (yet) created by hostapd when netifd tried to claim it as if it lacked a proper synchronization with hostapd.

As a result:

  • wl1-gst device is never added as bridge member,
  • it permanently stays in “down” state:
# ubus call network.device status '{ "name": "wl1-gst" }'
{
	"external": true,
	"present": true,
	"type": "Network device",
	"up": false,
	"carrier": true,
	"statistics": {
                ...
	}
}
  • the second 5 GHz VAP is pretty much useless.

There’s no easy way to workaround this since each wifi reload command triggers the same routine.

Is it possible to fix netifd without a major rewrite? It seems that to consider each VAP ready as soon as hostapd is started, which is obviously not the case.

The problem was originally reported in FS#2698 but the workaround in https://github.com/openwrt/openwrt/pull/2848 treats only some symptoms. The root cause is still unaddressed.


31.10.20203418Base systemBug ReportVery LowHighLatest build for TL-WR1043ND v2 (ath79) does not boot -...TrunkUnconfirmed Task Description

Device: TL-WR1043ND v2
Software versions: Linux version 5.4.72 (risa@gentoo-vb) (gcc version 9.3.0 (OpenWrt GCC 9.3.0 r14820-5cdc65f6d1)) #0 Sat Oct 31 20:27:47 2020

I am building a the latest snapshot into a custom image by using ImageBuilder, the latest build of r14820-5cdc65f6d1 does not boot, because the `/sbin/init` process misses some libraries. Following is the output from serial console during the failed boot:

U-Boot 1.1.4 (Jun 18 2013 - 15:51:52)

ap135 - Scorpion 1.0DRAM:
sri
Scorpion 1.0
ath_ddr_initial_config(178): (16bit) ddr2 init
tap = 0x00000003
Tap (low, high) = (0x0, 0x1e)
Tap values = (0xf, 0xf, 0xf, 0xf)
64 MB
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x17
flash size 8MB, sector count = 128
Flash:  8 MB
Using default environment

*** Warning *** : PCIe WLAN Module not found !!!
*** Warning *** : PCIe WLAN Module not found !!!
In:    serial
Out:   serial
Err:   serial
Net:   ath_gmac_enet_initialize...
athrs_sgmii_res_cal: cal value = 0xe
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
ath_gmac_enet_initialize: reset mask:c02200
Scorpion  ----> S17 PHY *
athrs17_reg_init: complete
: cfg1 0x80000000 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
eth0 up
athrs17_reg_init_wan done
SGMII in forced mode
athr_gmac_sgmii_setup SGMII done
: cfg1 0x800c0000 cfg2 0x7214
eth1: ba:be:fa:ce:08:41
eth1 up
eth0, eth1
Setting 0x18116290 to 0x50a1a14f
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 5.4.72 (risa@gentoo-vb) (gcc version 9.3.0 (OpenWrt GCC 9.3.0 r14820-5cdc65f6d1)) #0 Sat Oct 31 20:27:47 2020
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] MIPS: machine is TP-Link TL-WR1043ND v2
[    0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16240
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 57408K/65536K available (4753K kernel code, 183K rwdata, 1100K rodata, 1188K init, 196K bss, 8128K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] random: get_random_bytes called from start_kernel+0x32c/0x518 with crng_init=0
[    0.000000] CPU clock: 720.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
[    0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
[    0.008304] Calibrating delay loop... 359.42 BogoMIPS (lpj=718848)
[    0.042895] pid_max: default: 32768 minimum: 301
[    0.047939] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.055731] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.068023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.078401] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.085760] pinctrl core: initialized pinctrl subsystem
[    0.092269] NET: Registered protocol family 16
[    0.125112] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    0.138512] clocksource: Switched to clocksource MIPS
[    0.145000] NET: Registered protocol family 2
[    0.150412] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.159383] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.167556] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.175076] TCP: Hash tables configured (established 1024 bind 1024)
[    0.181978] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.188984] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.196689] NET: Registered protocol family 1
[    0.201403] PCI: CLS 0 bytes, default 32
[    0.209179] workingset: timestamp_bits=14 max_order=14 bucket_order=0
[    0.222121] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.228370] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.253702] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[    0.260356] gpio-export gpio-export: 1 gpio(s) exported
[    0.266791] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.274237] printk: console [ttyS0] disabled
[    0.278880] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A
[    0.288078] printk: console [ttyS0] enabled
[    0.288078] printk: console [ttyS0] enabled
[    0.296983] printk: bootconsole [early0] disabled
[    0.296983] printk: bootconsole [early0] disabled
[    0.326653] spi-nor spi0.0: s25fl064k (8192 Kbytes)
[    0.331659] 3 fixed-partitions partitions found on MTD device spi0.0
[    0.338114] Creating 3 MTD partitions on "spi0.0":
[    0.342997] 0x000000000000-0x000000020000 : "u-boot"
[    0.348955] 0x000000020000-0x0000007f0000 : "firmware"
[    0.356886] 2 tplink-fw partitions found on MTD device firmware
[    0.362955] Creating 2 MTD partitions on "firmware":
[    0.368020] 0x000000000000-0x0000001e7881 : "kernel"
[    0.373908] 0x0000001e7884-0x0000007d0000 : "rootfs"
[    0.379757] mtd: device 3 (rootfs) set to be root filesystem
[    0.387289] 1 squashfs-split partitions found on MTD device rootfs
[    0.393628] 0x0000004b0000-0x0000007d0000 : "rootfs_data"
[    0.399977] 0x0000007f0000-0x000000800000 : "art"
[    0.407475] libphy: Fixed MDIO Bus: probed
[    0.744356] libphy: ag71xx_mdio: probed
[    0.751255] switch0: Atheros AR8327 rev. 4 switch registered on mdio.0
[    1.138505] random: fast init done
[    1.335866] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[    1.346964] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[    1.668297] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[    1.678016] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: sgmii
[    1.684519] i2c /dev entries driver
[    1.690083] NET: Registered protocol family 10
[    1.699644] Segment Routing with IPv6
[    1.703525] NET: Registered protocol family 17
[    1.708120] 8021q: 802.1Q VLAN Support v1.8
[    1.718966] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    1.732581] Freeing unused kernel memory: 1188K
[    1.737201] This architecture does not have kernel memory protection.
[    1.743742] Run /sbin/init as init process
Error loading shared library libubox.so: No such file or directory (needed by /sbin/init)
Error loading shared library libubus.so: No such file or directory (needed by /sbin/init)
Error loading shared library libjson-c.so.5: No such file or directory (needed by /sbin/init)
Error loading shared library libblobmsg_json.so: No such file or directory (needed by /sbin/init)
Error loading shared library libjson_script.so: No such file or directory (needed by /sbin/init)
Error relocating[    2.195702] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00
[    2.204495] Rebooting in 1 seconds..


U-Boot 1.1.4 (Jun 18 2013 - 15:51:52)

The libs are built correctly:

risa@gentoo-vb ~/openwrt/openwrt $ ldd staging_dir/host/bin/ucert
        linux-vdso.so.1 (0x00007ffcd6db2000)
        libubox.so => /home/risa/openwrt/openwrt/staging_dir/host/lib/libubox.so (0x00007f914f60e000)
        libblobmsg_json.so => /home/risa/openwrt/openwrt/staging_dir/host/lib/libblobmsg_json.so (0x00007f914f609000)
        libjson-c.so.5 => /home/risa/openwrt/openwrt/staging_dir/host/lib/libjson-c.so.5 (0x00007f914f5f6000)
        libc.so.6 => /lib64/libc.so.6 (0x00007f914f433000)
        /lib64/ld-linux-x86-64.so.2 (0x00007f914f626000)
risa@gentoo-vb ~/openwrt/openwrt $ ls -la /home/risa/openwrt/openwrt/staging_dir/host/lib/libubox.so
-rwxr-xr-x 1 risa risa 417040 Oct 31 23:25 /home/risa/openwrt/openwrt/staging_dir/host/lib/libubox.so
risa@gentoo-vb ~/openwrt/openwrt $ ls -la /home/risa/openwrt/openwrt/staging_dir/host/lib/libblobmsg_json.so
-rwxr-xr-x 1 risa risa 115704 Oct 31 23:25 /home/risa/openwrt/openwrt/staging_dir/host/lib/libblobmsg_json.so
risa@gentoo-vb ~/openwrt/openwrt $ ls -la /home/risa/openwrt/openwrt/staging_dir/host/lib/libjson-c.so.5
lrwxrwxrwx 1 risa risa 18 Oct 31 23:24 /home/risa/openwrt/openwrt/staging_dir/host/lib/libjson-c.so.5 -> libjson-c.so.5.1.0
risa@gentoo-vb ~/openwrt/openwrt $ ls -la ./staging_dir/target-mips_24kc_musl/usr/lib/libubus.so
-rwxr-xr-x 1 risa risa 146900 Oct 31 23:27 ./staging_dir/target-mips_24kc_musl/usr/lib/libubus.so

but for some reason are not present in the final image built from ImageBuilder.

The image built using the same configuration from the older revision (7190fb2da4) has the size:

-rw-r--r--  1 risa risa 6684973 Sep 20 15:46 openwrt-ath79-generic-tplink_tl-wr1043nd-v2-squashfs-sysupgrade.bin

while the new one built now is much smaller. It looks like some parts are not correctly stored in the image:

-rw-r--r--  1 risa risa 4915501 Oct 31 23:46 openwrt-ath79-generic-tplink_tl-wr1043nd-v2-squashfs-sysupgrade.bin


31.10.20203417Base systemBug ReportVery LowMedium /etc/config/luci seems to be corrupt, unable to find s...openwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

OpenWRT 19.07.4 on xRX200 rev 1.2 (BT Home Hub 5A) with all packages up to date.
After running the router for a while I’ll try to login to the page and get this error:
/usr/lib/lua/luci/dispatcher.lua:426: /etc/config/luci seems to be corrupt, unable to find section ‘main’

This would normally be accompanied with the 5GHz channel set to 149 (which is a paid-for channel in the UK).
Checking /etc/config/luci looks fine to me and sometimes service rcpd restart works but other times it leaves Luci in an unusable state.

30.10.20203414Base systemBug ReportVery LowMediumNetwork crashopenwrt-19.07Unconfirmed Task Description

Model Xiaomi Mi Router 3G
Architecture MediaTek MT7621 ver:1 eco:3
Firmware Version OpenWrt 19.07.3 r11063-85e04e9f46 / LuCI openwrt-19.07 branch git-20.136.49537-fb2f363

2 wireguard tunnels, average load 0.7, constantly transferring around 50Mbps. What to do?

[11093.040136] ————[ cut here ]———— [11093.044786] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:320 0x8038ba10
[11093.051827] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
[11093.058754] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY wireguard slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet
[11093.130344] ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip_gre gre ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
[11093.177365] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.180 #0
[11093.183431] Stack : 00000000 00000000 00000000 8fe9f540 00000000 00000000 00000000 00000000
[11093.191767] 00000000 00000000 00000000 00000000 00000000 00000001 8fc0bd60 1cc28254
[11093.200102] 8fc0bdf8 00000000 00000000 00006480 00000038 8049c0d8 00000008 00000000
[11093.208454] 00000000 80550000 0002b4d5 00000000 8fc0bd40 00000000 00000000 8050ae44
[11093.216791] 8038ba10 00000140 00000001 8fe9f540 00000000 802accb0 00000004 806b0004
[11093.225127] ...
[11093.227562] Call Trace:
[11093.227577] [<8049c0d8>] 0x8049c0d8
[11093.233476] [<8038ba10>] 0x8038ba10
[11093.236946] [<802accb0>] 0x802accb0
[11093.240418] [<8000c1a0>] 0x8000c1a0
[11093.243889] [<8000c1a8>] 0x8000c1a8
[11093.247357] [<80484f34>] 0x80484f34
[11093.250830] [<80071a90>] 0x80071a90
[11093.254301] [<8002e608>] 0x8002e608
[11093.257770] [<8038ba10>] 0x8038ba10
[11093.261244] [<8002e690>] 0x8002e690
[11093.264714] [<800550e8>] 0x800550e8
[11093.268183] [<8038ba10>] 0x8038ba10
[11093.271656] [<80099940>] 0×80099940 [11093.275127] [<8038b864>] 0x8038b864
[11093.278596] [<8008850c>] 0x8008850c
[11093.282067] [<8005f1fc>] 0x8005f1fc
[11093.285536] [<800887c8>] 0x800887c8
[11093.289004] [<800790f8>] 0x800790f8
[11093.292481] [<804a2ed8>] 0x804a2ed8
[11093.295955] [<80032fb4>] 0x80032fb4
[11093.299422] [<8025a2f0>] 0x8025a2f0
[11093.302894] [<80007488>] 0×80007488 [11093.306362]
[11093.307906] —[ end trace 1eeab0d01990d637 ]— [11093.312528] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
[11093.318683] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000065
[11093.324685] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=0ebc0000, max=0, ctx=639, dtx=639, fdx=638, next=639
[11093.335184] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=0df60000, max=0, calc=1798, drx=1799
[11093.347900] mtk_soc_eth 1e100000.ethernet: 0×100 = 0x6060000c, 0x10c = 0×80818 [11093.360558] mtk_soc_eth 1e100000.ethernet: PPE started
[36804.131736] conntrack: generic helper won’t handle protocol 47. Please consider loading the specific helper module.
[51119.838502] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
[51119.844705] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000065
[51119.850717] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=0de70000, max=0, ctx=2403, dtx=2403, fdx=2402, next=2403
[51119.861557] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=0bc40000, max=0, calc=2683, drx=2684
[51119.874059] mtk_soc_eth 1e100000.ethernet: 0×100 = 0x6060000c, 0x10c = 0×80818 [51119.886726] mtk_soc_eth 1e100000.ethernet: PPE started
[89229.695179] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
[89229.701380] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000065
[89229.707395] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=0ed30000, max=0, ctx=836, dtx=836, fdx=835, next=836
[89229.717886] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=0bf30000, max=0, calc=3466, drx=3467
[89229.730663] mtk_soc_eth 1e100000.ethernet: 0×100 = 0x6060000c, 0x10c = 0×80818 [89229.743335] mtk_soc_eth 1e100000.ethernet: PPE started
[113529.605540] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
[113529.611808] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000065
[113529.617908] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=0bf30000, max=0, ctx=2724, dtx=2724, fdx=2723, next=2724
[113529.628843] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=0bde0000, max=0, calc=3154, drx=3155
[113529.641841] mtk_soc_eth 1e100000.ethernet: 0×100 = 0x6060000c, 0x10c = 0×80818 [113529.654635] mtk_soc_eth 1e100000.ethernet: PPE started

27.10.20203411Base systemBug ReportVery LowMediumThe firewall refuses any connection when i add more tha...openwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

And the DHCP Server doesn’t work any more!

My route is below:

主机名 OpenWrt
型号 UBNT-ERX
架构 MediaTek MT7621 ver:1 eco:3
固件版本 OpenWrt 19.07.4 r11208-ce6496d796 / LuCI openwrt-19.07 branch git-20.247.75781-0d0ab01
内核版本 4.14.195
本地时间 2020-10-27 10:04:52

27.10.20203410Base systemBug ReportVery LowMediumbusybox ip cannot show all IPv6 routing table but localopenwrt-19.07Unconfirmed Task Description

In OpenWrt 19.07.4, ip from busybox can modify IPv6 routes in any table but it cannot show them. ip-full does not have any issues any issues:

# busybox ip -6 route add fdac:9818:b256:fe::6 dev wireguard table 22
# busybox ip -6 route show table 22
# ip -6 route show table 22 # ip form ip-full
fdac:9818:b256:fe::6 dev wireguard metric 1024 pref medium

It is not target specific. Tested with x86_64 and ath79

Showing tasks 51 - 100 of 1078 Page 2 of 22 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing