OpenWrt/LEDE Project

Welcome to the OpenWrt/LEDE Project bug reporting and issue tracking system

Problems to be reported here are for the OpenWrt/LEDE Project targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt/LEDE Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to lede-bugs@infradead.org.

OpenedIDCategoryTask Type  ascPrioritySeveritySummaryReported InStatus
10.02.2017494Base systemBug ReportVery LowCriticalNETDEV WATCHDOG: ptm0 (): transmit queue 0 timed outAllNew Task Description

I have a VDSL line with Plusnet (UK) - the connection is pppoe - ptm0.101. With the supplied modem/router the line and connection is stable with no disconnects. With LEDE the connection is established and works well until it disconnects (sometimes as early as few minutes other times it stays connected up to an hour). After the disconnect there is no reconnection until a reboot. Restarting wan interface (ifdown wan/ifup wan) or dsl connection (/etc/init.d/dslcontrol stop/start) does not help.

Supply the following if possible:
- Device problem occurs on TP-w8970 and BTHomehub 5A (same crash on both lantiq based devices)
- Software versions of LEDE release, packages, etc. Tested on LEDE RC2, earlier LEDE snapshot from October 2016, Openwrt CC - same symptoms
- Steps to reproduce - VDSL connection on ptm0.101 via pppoe

Here is a trace of the crash (dmesg):

[ 1414.124413] —[ beginning trace ff034b465cdad16b ]— [ 1414.125631] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:303 dev_watchdog+0x1a8/0x2f0()
[ 1414.126471] NETDEV WATCHDOG: ptm0 (): transmit queue 0 timed out
[ 1414.132456] Modules linked in: ltq_ptm_vr9 option iptable_nat ath9k usb_wwan rt2800usb rt2800lib
pppoe nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 l2tp_ppp ipt_REJECT ipt_MASQUERADE ath9k_common
xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_policy xt_nat xt_multiport xt_mark xt_mac
xt_limit xt_length xt_id xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit
xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY usbserial rt2x00usb
rt2x00lib pppox ppp_async nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6
nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack ltq_deu_vr9 iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN
ip_tables crc_itu_t crc_ccitt cdc_acm ath9k_hw ath10k_pci ath10k_core ath mac80211 cfg80211 compat drv_dsl_cpe_api
drv_mei_cpe xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net
ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark
ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6
nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables pppoatm ppp_generic slhc
l2tp_ip6 l2tp_ip l2tp_eth sit l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel ipcomp xfrm4_tunnel xfrm4_mode_tunnel
xfrm4_mode_transport xfrm4_mode_beet esp4 ah4 tunnel4 ip_tunnel tun af_key xfrm_user xfrm_ipcomp xfrm_algo br2684 atm
drv_ifxos echainiv sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac des_generic cbc authenc usb_storage
dwc2 uhci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache aead crypto_null
[ 1414.287462] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.7 #1
[ 1414.293130] Stack : 804b0000 00000001 00000000 00000000 805172b8 80516f43 80489a24 00000000
[ 1414.293130] 80673844 00010000 80510000 805159bc 80515abc 80055664 00000003 80510000
[ 1414.293130] 80491b4c 00000000 8048ff50 80511c44 80515abc 800535b0 00000006 00000001
[ 1414.293130] 00000000 80512000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1414.293130] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1414.293130] ...
[ 1414.328618] Call Trace:
[ 1414.331095] [<800178a8>] show_stack+0×50/0×84 [ 1414.335454] [<8002af48>] warn_slowpath_common+0xa0/0xd0
[ 1414.340670] [<8002afa4>] warn_slowpath_fmt+0x2c/0×38 [ 1414.345636] [<802e637c>] dev_watchdog+0x1a8/0x2f0
[ 1414.350348] [<8005f7b0>] call_timer_fn.isra.5+0×24/0×80 [ 1414.355557] [<8005fa2c>] run_timer_softirq+0x1a4/0×208 [ 1414.360694] [<8002de80>] __do_softirq+0×298/0x2b0
[ 1414.365388] [<80002430>] ret_from_irq+0×0/0×4 [ 1414.369760] [<80013a8c>] r4k_wait_irqoff+0×18/0×20 [ 1414.374528] [<8004ff6c>] cpu_startup_entry+0xa4/0xf8
[ 1414.379508] [<80539bf8>] start_kernel+0×474/0×494 [ 1414.384180]
[ 1414.385631] —[ end trace ff034b465cdad16b ]—

 


11.05.2017775Base systemBug ReportVery LowCriticalflashing kirkwood u-boot page not aligned [Zyxel NSA-32...TrunkUnconfirmed Task Description

[code]/e-data/4089-AD8E/tools # flash_erase /dev/mtd0 0 4
Erasing 128 Kibyte @ 60000 – 100 % complete[/code]

now when I flash the LEDE uboot I get this

[code]/e-data/4089-AD8E # nandwrite /dev/mtd0 kirkwood/generic/u-boot-nsa325/u-boot.kwb
Input file is not page aligned Data did not fit into device, due to bad blocks
: Success[/code]

the expected should be
[code]/ # nandwrite /dev/mtd0 /e-data/4089-AD8E/uboot.2016.05-tld-1.nsa325.mtd0.kwb
Writing data to block 0 at offset 0×0 Writing data to block 1 at offset 0×20000 Writing data to block 2 at offset 0×40000 Writing data to block 3 at offset 0×60000[/code]

now I can’t even turn off my device. Hopeful to be resolve asap.

24.05.2017801Base systemBug ReportVery LowCriticalR7800 wifi crashingTrunkUnconfirmed Task Description

- Device problem occurs on: Netgear Nighthawk X4S R7800
- Software versions of LEDE release, packages, etc.: LEDE Reboot SNAPSHOT r4173-5d48dc1146 / LuCI Master (git-17.141.68918-5ca3864)
- Steps to reproduce
Boot device, wait for it to crash within 24hours

The paste ending in Hn was recorder after wifi stopped working and i turned wifi off and on.
The paste ending in Wu happend about 30 minutes after that and could only be resolved by rebooting the device.

 


18.10.20171074Base systemBug ReportVery LowCriticalNETDEV WATCHDOG: wlan2 (mwifiex_sdio): transmit queue 1...TrunkUnconfirmed Task Description

- Device problem occurs on: WRT3200ACM
- Software versions of LEDE release, packages, etc.: LEDE Reboot SNAPSHOT r5096-a29848c / LuCI Master (git-17.260.43176-678c15c)
- Steps to reproduce: I’ve been consistently having problems with wlan2 going offline after the router has been up for a day or so, but just stumbled across this in dmesg. I’ll see if I can figure out the circumstances leading to it.

 

[85338.316517] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x1b4/0×234 [85338.324820] NETDEV WATCHDOG: wlan2 (mwifiex_sdio): transmit queue 1 timed out
[85338.331987] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CLASSIFY slhc rfcomm nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack mwifiex_sdio mwifiex iptable_mangle iptable_filter ipt_ECN ip_tables hidp hci_uart crc_ccitt btusb btmrvl_sdio btmrvl btintel bnep bluetooth hid evdev input_core mwlwifi mac80211 cfg80211 compat xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport
[85338.404541] ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables tun regmap_mmio ecb cmac uhci_hcd ohci_platform ohci_hcd gpio_button_hotplug
[85338.442106] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.9.54 #0
[85338.448049] Hardware name: Marvell Armada 380/385 (Device Tree)
[85338.454003] [<c0016010>] (unwind_backtrace) from [<c0012220>] (show_stack+0×10/0×14)
[85338.461782] [<c0012220>] (show_stack) from [<c020c1a0>] (dump_stack+0x7c/0x9c)
[85338.469036] [<c020c1a0>] (dump_stack) from [<c0029218>] (warn+0xbc/0xec)
[85338.475939] [<c0029218>] (
warn) from [<c002927c>] (warn_slowpath_fmt+0×34/0×44)
[85338.483455] [<c002927c>] (warn_slowpath_fmt) from [<c03b6c38>] (dev_watchdog+0x1b4/0×234)
[85338.491661] [<c03b6c38>] (dev_watchdog) from [<c006ffe8>] (call_timer_fn+0×20/0×94)
[85338.499349] [<c006ffe8>] (call_timer_fn) from [<c0070220>] (run_timer_softirq+0x1c4/0×200)
[85338.507650] [<c0070220>] (run_timer_softirq) from [<c002d2b4>] (do_softirq+0xd0/0×204)
[85338.515775] [<c002d2b4>] (
do_softirq) from [<c002d66c>] (irq_exit+0×94/0xb8)
[85338.523029] [<c002d66c>] (irq_exit) from [<c0061e04>] (handle_domain_irq+0×90/0xb4)
[85338.530892] [<c0061e04>] (
handle_domain_irq) from [<c0009428>] (gic_handle_irq+0×50/0×94)
[85338.539277] [<c0009428>] (gic_handle_irq) from [<c0012c8c>] (irq_svc+0x6c/0×90)
[85338.546789] Exception stack(0xdf475f90 to 0xdf475fd8)
[85338.551860] 5f80: 00000001 00000000 00000000 c001b1c0
[85338.560071] 5fa0: 00000000 df474000 c0604fe4 00000002 c05ff168 00000000 df475fe8 00000001
[85338.568282] 5fc0: 00000000 df475fe0 c000f808 c000f80c 60000013 ffffffff
[85338.574925] [<c0012c8c>] (
irq_svc) from [<c000f80c>] (arch_cpu_idle+0x2c/0×38)
[85338.582355] [<c000f80c>] (arch_cpu_idle) from [<c005b154>] (cpu_startup_entry+0xf0/0x19c)
[85338.590567] [<c005b154>] (cpu_startup_entry) from [<000095ac>] (0x95ac)
[85338.597214] —[ end trace 7ee504210e2aead0 ]— [85338.601865] mwifiex_sdio mmc0:0001:1: 8504333 : Tx timeout(#1), bss_type-num = 1-0
[85344.871433] mwifiex_sdio mmc0:0001:1: 8504960 : Tx timeout(#2), bss_type-num = 1-0
[85350.631045] mwifiex_sdio mmc0:0001:1: 8505536 : Tx timeout(#3), bss_type-num = 1-0
[85356.400657] mwifiex_sdio mmc0:0001:1: 8506113 : Tx timeout(#4), bss_type-num = 1-0
[85366.309996] mwifiex_sdio mmc0:0001:1: 8507104 : Tx timeout(#5), bss_type-num = 1-0
[85376.309327] mwifiex_sdio mmc0:0001:1: 8508104 : Tx timeout(#6), bss_type-num = 1-0
[85386.318652] mwifiex_sdio mmc0:0001:1: 8509105 : Tx timeout(#7), bss_type-num = 1-0
[85386.326257] mwifiex_sdio mmc0:0001:1: tx_timeout_cnt exceeds threshold. Triggering card reset!
[85386.356950] mwifiex_sdio mmc0:0001:1: info: shutdown mwifiex...
[85386.362967] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.368924] mwifiex_sdio mmc0:0001:1: Failed to delete mgmt IEs!
[85386.374978] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.380928] mwifiex_sdio mmc0:0001:1: Failed to stop the BSS
[85386.387009] br-lan: port 4(wlan2) entered disabled state
[85386.394495] device wlan2 left promiscuous mode
[85386.398975] br-lan: port 4(wlan2) entered disabled state
[85386.404593] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.410562] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.416507] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[85386.603147] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
[85386.610161] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[85396.707953] mwifiex_sdio mmc0:0001:1: mwifiex_cmd_timeout_func: Timeout cmd id = 0xa9, act = 0×0 [85396.716787] mwifiex_sdio mmc0:0001:1: num_data_h2c_failure = 0
[85396.722652] mwifiex_sdio mmc0:0001:1: num_cmd_h2c_failure = 0
[85396.728423] mwifiex_sdio mmc0:0001:1: is_cmd_timedout = 1
[85396.733842] mwifiex_sdio mmc0:0001:1: num_tx_timeout = 0
[85396.739178] mwifiex_sdio mmc0:0001:1: last_cmd_index = 3
[85396.744512] mwifiex_sdio mmc0:0001:1: last_cmd_id: b3 00 b3 00 b2 00 a9 00 b3 00
[85396.751940] mwifiex_sdio mmc0:0001:1: last_cmd_act: 00 00 00 00 00 00 00 00 00 00
[85396.759457] mwifiex_sdio mmc0:0001:1: last_cmd_resp_index = 2
[85396.765225] mwifiex_sdio mmc0:0001:1: last_cmd_resp_id: b3 80 b3 80 b2 80 b3 80 b3 80
[85396.773093] mwifiex_sdio mmc0:0001:1: last_event_index = 2
[85396.778603] mwifiex_sdio mmc0:0001:1: last_event: 37 00 55 00 43 00 55 00 55 00
[85396.785944] mwifiex_sdio mmc0:0001:1: data_sent=1 cmd_sent=1
[85396.791630] mwifiex_sdio mmc0:0001:1: ps_mode=0 ps_state=0
[85396.797372] mwifiex_sdio mmc0:0001:1: info: _mwifiex_fw_dpc: unregister device

19.10.20171085KernelBug ReportVery LowCriticalStreaming ieee80211 cmd timeouts followed by crashTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: Linksys WRT3200ACM
- Software versions of LEDE release, packages, etc.: LEDE Reboot SNAPSHOT r5096-a29848c / LuCI Master (git-17.260.43176-678c15c)

Router had been up for less than 24 hours from last crash. Started streaming the following errors in syslog:

Thu Oct 19 16:50:41 2017 kern.err kernel: [82666.284359] ieee80211 phy0: cmd 0×9122=UpdateEncryption timed out
Thu Oct 19 16:50:41 2017 kern.err kernel: [82666.290490] ieee80211 phy0: return code: 0×1122 Thu Oct 19 16:50:41 2017 kern.err kernel: [82666.295069] ieee80211 phy0: timeout: 0×1122 Thu Oct 19 16:50:41 2017 kern.err kernel: [82666.299280] wlan0: failed to set key (0, e0:b5:2d:xx:xx:xx) to hardware (-5)
Thu Oct 19 16:50:41 2017 daemon.notice hostapd: wlan0: AP-STA-CONNECTED e0:b5:2d:xx:xx:xx
Thu Oct 19 16:50:45 2017 kern.err kernel: [82670.356504] ieee80211 phy0: cmd 0x801d=MEMAddrAccess timed out
Thu Oct 19 16:50:45 2017 kern.err kernel: [82670.362367] ieee80211 phy0: return code: 0x051d
Thu Oct 19 16:50:45 2017 kern.err kernel: [82670.366924] ieee80211 phy0: timeout: 0x001d
Thu Oct 19 16:50:49 2017 kern.err kernel: [82674.372313] ieee80211 phy0: cmd 0x801d=MEMAddrAccess timed out
Thu Oct 19 16:50:49 2017 kern.err kernel: [82674.378197] ieee80211 phy0: return code: 0x001d
Thu Oct 19 16:50:49 2017 kern.err kernel: [82674.382749] ieee80211 phy0: timeout: 0x001d

Interspersed with these messages were a few:
Thu Oct 19 16:52:43 2017 daemon.notice hostapd: nl80211: nl80211_recv_beacons→nl_recvmsgs failed: -5

These then started showing up:
Thu Oct 19 16:54:56 2017 daemon.notice netifd: wan6 (1414): Command failed: Request timed out

Then a handful of these:
Thu Oct 19 16:56:00 2017 kern.err kernel: [82985.426468] ieee80211 phy0: cmd 0×9143=GetSeqno timed out
Thu Oct 19 16:56:00 2017 kern.err kernel: [82985.431902] ieee80211 phy0: return code: 0×1143 Thu Oct 19 16:56:00 2017 kern.err kernel: [82985.436450] ieee80211 phy0: timeout: 0×1143

Followed by this, including a crash:
Thu Oct 19 16:56:36 2017 kern.err kernel: [83021.558164] wlan0: failed to remove key (0, 78:7e:61:xx:xx:xx) from hardware (-5)
Thu Oct 19 16:56:36 2017 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED e0:b5:2d:2a:89:30
Thu Oct 19 16:56:36 2017 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED dc:41:5f:b9:0d:ba
Thu Oct 19 16:56:40 2017 kern.err kernel: [83025.588715] ieee80211 phy0: cmd 0×9122=UpdateEncryption timed out
Thu Oct 19 16:56:40 2017 kern.err kernel: [83025.594898] ieee80211 phy0: return code: 0×1122 Thu Oct 19 16:56:40 2017 kern.err kernel: [83025.599463] ieee80211 phy0: timeout: 0×1122 Thu Oct 19 16:56:40 2017 kern.err kernel: [83025.603666] wlan0: failed to remove key (0, dc:41:5f:xx:xx:xx) from hardware (-5)
Thu Oct 19 16:56:44 2017 kern.err kernel: [83029.646987] ieee80211 phy0: cmd 0×9125=BAStream timed out
Thu Oct 19 16:56:44 2017 kern.err kernel: [83029.652419] ieee80211 phy0: return code: 0×1125 Thu Oct 19 16:56:44 2017 kern.err kernel: [83029.656973] ieee80211 phy0: timeout: 0×1125 Thu Oct 19 16:56:48 2017 kern.err kernel: [83033.654789] ieee80211 phy0: cmd 0×9125=BAStream timed out
Thu Oct 19 16:56:48 2017 kern.err kernel: [83033.660221] ieee80211 phy0: return code: 0×1125 Thu Oct 19 16:56:48 2017 kern.err kernel: [83033.664769] ieee80211 phy0: timeout: 0×1125 Thu Oct 19 16:56:52 2017 kern.err kernel: [83037.666085] ieee80211 phy0: cmd 0×9125=BAStream timed out
Thu Oct 19 16:56:52 2017 kern.err kernel: [83037.671519] ieee80211 phy0: return code: 0×1125 Thu Oct 19 16:56:52 2017 kern.err kernel: [83037.676066] ieee80211 phy0: timeout: 0×1125

Thu Oct 19 16:56:52 2017 kern.alert kernel: [83037.680345] Unable to handle kernel NULL pointer dereference at virtual address 0000000c
Thu Oct 19 16:56:52 2017 kern.alert kernel: [83037.688494] pgd = d303c000
Thu Oct 19 16:56:53 2017 kern.alert kernel: [83037.691221] [0000000c] *pgd=1369c831, *pte=00000000, *ppte=00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.697545] Internal error: Oops: 17 [#1] SMP ARM
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.702266] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CLASSIFY slhc rfcomm nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipvThu Oct 19 16:56:53 2017 kern.warn kernel: [83037.774820] ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables tun regmap_mmio ecb cmac uhci_hcd ohci_platform ohci_hcd gpio_button_hotplug
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.812372] CPU: 1 PID: 3044 Comm: hostapd Not tainted 4.9.54 #0
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.818403] Hardware name: Marvell Armada 380/385 (Device Tree)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.824346] task: df564e40 task.stack: d3718000
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.828909] PC is at mwl_fwcmd_destroy_ba+0×98/0xf4 [mwlwifi]
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.834683] LR is at mwl_fwcmd_destroy_ba+0×34/0xf4 [mwlwifi]
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.840451] pc : [<bf18a624>] lr : [<bf18a5c0>] psr: 60000013
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.840451] sp : d3719c90 ip : 00000000 fp : 00000000
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.851975] r10: dde78000 r9 : dde78048 r8 : dde78054
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.857220] r7 : ddfc1620 r6 : ddfc2924 r5 : 00000000 r4 : ddcb0000
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.863771] r3 : 00000000 r2 : 00000002 r1 : 00000000 r0 : 00000000
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.870324] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83037.877487] Control: 10c5387d Table: 1303c04a DAC: 00000051
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.883255] Process hostapd (pid: 3044, stack limit = 0xd3718210)
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.889372] Stack: (0xd3719c90 to 0xd371a000)
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.893745] 9c80: dde78054 00000007 d8008de8 ddfc45e0
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.901957] 9ca0: ddfc0be0 bf18aac8 d8008de8 ddfc1620 ddfc0be0 d3c51e14 d36b9ce0 de7e0000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.910168] 9cc0: 00000014 bf185b94 d8008800 00000002 00000001 d3c51e14 d81f5e40 de7e0000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.918379] 9ce0: 00000014 bf118c98 ddfc0be0 d36b94c0 d8008800 bf11b2dc 00000002 00000002
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.926589] 9d00: d8008800 ddfc0be0 d36b94c0 bf11c270 d8008800 00000000 00000000 d8008800
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.934800] 9d20: d3c51e20 bf11c3bc d36b94c0 00000454 d3c51e20 bf11c434 ddfc0000 d36b9000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.943012] 9d40: d3719d68 bf0e38e4 d3c51e20 0002000c 00000000 bf0ff534 bf108c84 c03c0e1c
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.951223] 9d60: bf0fee9a 80150014 59e7e961 0000068e d3c51e00 d3c51e10 d3c51e14 de7e0000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.959434] 9d80: ddfc0000 d36b9000 d3c51e00 d81f5e40 c03c0b94 d3475c00 d3719dcc 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.967645] 9da0: 00000008 c03c01d0 c0629cb0 d81f5e40 d81f5e40 c03c0b80 df4ba400 00000028
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.975857] 9dc0: d81f5e40 c03bfbd4 d3475c00 7fffffff 00000000 d81f5e40 00000000 d3719f68
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.984068] 9de0: 00000028 d3475c00 00000000 c03c0040 00000000 c021cb0c 00000028 d0851040
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83037.992278] 9e00: 00000000 00000be4 00000000 00000000 00000001 d3719f68 00000000 d3719e8c
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.000489] 9e20: df30f200 00000000 c0604fc8 00000000 00000000 c0380060 d3719f68 c03805f0
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.008701] 9e40: 00000000 00000000 00000000 00376010 00000028 beadcbec 00000000 d3719eb4
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.016912] 9e60: df30f200 c03807e8 c05ffec0 00000000 beadcc54 0038a030 00004000 c004f000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.025124] 9e80: dfbd2ef0 ffffffff e813b2d8 c0628400 d3719ecc 00000051 00008933 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.033334] 9ea0: 00000000 beadcc8c 00000020 00000010 00000000 00000000 00000000 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.041545] 9ec0: dfbd2ef0 c0605998 c05ffec0 6e616c77 d32552c0 60000013 df569500 d3255080
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.049755] 9ee0: 00000000 d3255080 d0029b20 c00f188c d0029b84 00000007 00000000 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.057966] 9f00: df564e40 c005aae0 d3719f08 d3719f08 df401180 d0029b00 df29dc38 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.066177] 9f20: df401580 df29dc38 df29dc38 00040936 d0029b20 df30f200 beadcc70 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.074388] 9f40: 00000128 c000ef04 d3718000 00000000 b6e9c740 c038138c 00000000 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.082599] 9f60: 00000000 fffffff7 d3719eac 0000000c 00000001 00000000 00000000 d3719e54
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.090809] 9f80: 00000000 00000006 00000000 00000000 00000000 00000000 00000000 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.099021] 9fa0: b6f1610c c000ed40 00000000 00000000 00000005 beadcc70 00000000 00000000
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.107231] 9fc0: 00000000 00000000 b6f1610c 00000128 b6e9cef0 00000000 0002516c b6e9c740
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.115443] 9fe0: beadcc18 beadcc04 b6eececc b6eec398 60000010 00000005 00000000 00000000
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.123678] [<bf18a624>] (mwl_fwcmd_destroy_ba [mwlwifi]) from [<bf18aac8>] (mwl_fwcmd_del_sta_streams+0x1d4/0×330 [mwlwifi])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.135037] [<bf18aac8>] (mwl_fwcmd_del_sta_streams [mwlwifi]) from [<bf185b94>] (mwl_mac80211_sta_remove+0×38/0x1c4 [mwlwifi])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.146598] [<bf185b94>] (mwl_mac80211_sta_remove [mwlwifi]) from [<bf118c98>] (drv_sta_state+0x16c/0×184 [mac80211])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.157290] [<bf118c98>] (drv_sta_state [mac80211]) from [<bf11b2dc>] (sta_info_move_state+0xbc/0x1d0 [mac80211])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.167629] [<bf11b2dc>] (sta_info_move_state [mac80211]) from [<bf11c270>] (sta_set_sinfo+0×954/0xa80 [mac80211])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.178054] [<bf11c270>] (sta_set_sinfo [mac80211]) from [<bf11c3bc>] (sta_info_destroy+0×20/0×28 [mac80211])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.188218] [<bf11c3bc>] (
sta_info_destroy [mac80211]) from [<bf11c434>] (sta_info_destroy_addr_bss+0x2c/0×44 [mac80211])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.199429] [<bf11c434>] (sta_info_destroy_addr_bss [mac80211]) from [<bf0e38e4>] (nl80211_del_station+0xe8/0xf0 [cfg80211])
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.210711] [<bf0e38e4>] (nl80211_del_station [cfg80211]) from [<c03c0e1c>] (genl_rcv_msg+0×288/0×310)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.220059] [<c03c0e1c>] (genl_rcv_msg) from [<c03c01d0>] (netlink_rcv_skb+0×58/0xb4)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.227922] [<c03c01d0>] (netlink_rcv_skb) from [<c03c0b80>] (genl_rcv+0×20/0×34)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.235436] [<c03c0b80>] (genl_rcv) from [<c03bfbd4>] (netlink_unicast+0×138/0x1fc)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.243124] [<c03bfbd4>] (netlink_unicast) from [<c03c0040>] (netlink_sendmsg+0x2f0/0×310)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.251425] [<c03c0040>] (netlink_sendmsg) from [<c0380060>] (sock_sendmsg+0×14/0×24)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.259287] [<c0380060>] (sock_sendmsg) from [<c03805f0>] (_sys_sendmsg+0×184/0×228)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.267238] [<c03805f0>] (
_sys_sendmsg) from [<c038138c>] (sys_sendmsg+0×40/0×64)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.275104] [<c038138c>] (
sys_sendmsg) from [<c000ed40>] (ret_fast_syscall+0×0/0x3c)
Thu Oct 19 16:56:53 2017 kern.emerg kernel: [83038.283055] Code: e5840010 e5d81004 e5c41014 e598c000 (e59c300c)
Thu Oct 19 16:56:53 2017 kern.warn kernel: [83038.289200] —[ end trace 6c4677423c79f036 ]—

21.10.20171094Base systemBug ReportVery LowCriticalno connection on any ethernet ports (incl internet) on ...TrunkUnconfirmed Task Description

Yesterday I upgraded the Linksys wrt1200ac from openwrt 15.05.1
to lede-17.01.4. The upgrade was done through a luci web
interface.

After reboot the wan connection was gone, as well as all local
ethernet ports. Wifi continued to work fine. The configuration
seems to have survived the upgrade. I couldn’t find anything
wrong with the configuration.

On the Internet port there were no packets coming in. On the
ethernet port 1 there are bootp/dhcp requests coming from the
router.

Not sure if that is relevant, but reverting back to 15.05.1
didn’t work either: the router is currently completely
inaccessible. I don’t have a serial cable, will probably order
one to try to debrick the thing.

02.11.20171139KernelBug ReportVery LowCriticalKernel crashTrunkUnconfirmed Task Description

Router stop working and all network drop requiring a router restart.
TP-Link TL-WDR4300 v1
LEDE Reboot SNAPSHOT r5217-098afa1e1b / LuCI Master (git-17.302.29094-87ec343)
Kernel - 4.9.58

Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.711795] ------------[ cut here ]------------
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.716575] WARNING: CPU: 0 PID: 0 at net/netfilter/nf_conntrack_rtcache.c:199 0x874673e0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.724867] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_netlink nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_string xt_state xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_LOG usbmon ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom umWed Nov  1 20:06:44 2017 kern.warn kernel: [11503.797335]  nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos vfat fat nls_utf8 nls_iso8859_1 nls_cp437 usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.820374] CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.58 #0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.826199] Stack : 804d78fa 00000031 00000000 00000001 804615d4 80461247 8041396c 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.834743]         804d3a40 000000c7 00000003 00000000 02080020 800a9b84 8041919c 80460000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.843287]         00000003 000000c7 8041736c 87c09824 02080020 800d923c 804d78fa 0000004d
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.851832]         00000000 80223000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.860377]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.868922]         ...
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.871414] Call Trace:
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.873905] [<8006b2e8>] show_stack+0x54/0x88
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.878362] [<80080530>] __warn+0xe4/0x118
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.882529] [<800805f8>] warn_slowpath_null+0x1c/0x34
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.887684] [<874673e0>] 0x874673e0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.891231] ---[ end trace 0fa0ed456ba22a7d ]---
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.896865] ------------[ cut here ]------------
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.901621] WARNING: CPU: 0 PID: 0 at net/netfilter/nf_conntrack_rtcache.c:199 0x874673e0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11503.909943] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_netlink nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_string xt_state xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_LOG usbmon ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom umWed Nov  1 20:06:44 2017 kern.warn kernel: [11503.982364]  nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos vfat fat nls_utf8 nls_iso8859_1 nls_cp437 usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.005412] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.9.58 #0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.012478] Stack : 804d78fa 0000003f 00000000 00000001 804615d4 80461247 8041396c 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.021029]         804d3a40 000000c7 00000003 00000000 02080020 800a9b84 8041919c 80460000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.029575]         00000003 000000c7 8041736c 87c09824 02080020 800d923c 804d78fa 0000004d
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.038119]         804736b0 80223000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.046664]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.055200]         ...
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.057701] Call Trace:
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.060191] [<8006b2e8>] show_stack+0x54/0x88
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.064636] [<80080530>] __warn+0xe4/0x118
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.068811] [<800805f8>] warn_slowpath_null+0x1c/0x34
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.073951] [<874673e0>] 0x874673e0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.077506] ---[ end trace 0fa0ed456ba22a7e ]---
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.150414] ------------[ cut here ]------------
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.155176] WARNING: CPU: 0 PID: 0 at net/netfilter/nf_conntrack_rtcache.c:199 0x874673e0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.163513] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_netlink nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_string xt_state xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_LOG usbmon ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom umWed Nov  1 20:06:44 2017 kern.warn kernel: [11504.235935]  nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos vfat fat nls_utf8 nls_iso8859_1 nls_cp437 usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.258985] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.9.58 #0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.266041] Stack : 804d78fa 0000003f 00000000 00000001 804615d4 80461247 8041396c 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.274584]         804d3a40 000000c7 00000003 00000000 02080020 800a9b84 8041919c 80460000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.283129]         00000003 000000c7 8041736c 87c09824 02080020 800d923c 804d78fa 0000004d
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.291682]         804736b0 80223000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.300237]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.308780]         ...
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.311272] Call Trace:
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.313764] [<8006b2e8>] show_stack+0x54/0x88
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.318220] [<80080530>] __warn+0xe4/0x118
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.322380] [<800805f8>] warn_slowpath_null+0x1c/0x34
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.327535] [<874673e0>] 0x874673e0
Wed Nov  1 20:06:44 2017 kern.warn kernel: [11504.331081] ---[ end trace 0fa0ed456ba22a7f ]---
08.11.20171158Base systemBug ReportVery LowCriticalATH10k QCA9880 5 Ghz mixed mode (sta and ap) not possib...TrunkUnconfirmed Task Description
 
Hardware: Archer C7 V2
Software: Trunk (r5280)

Using the 5 Ghz radio in accesspoint mode (mode ap) and client mode (mode sta) at the same time doesnt work.
Only client mode works.
No error messages will be generated.
With version V17.01.4 all is fine (same configuration).

Config details:

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11a'
	option path 'pci0000:01/0000:01:00.0'
	option noscan '1'
	option htmode 'VHT80'
	option multicast_querier '0'
	option igmp_snooping '0'
	option distance '8'
	option log_level '3'
	option compression '1'
	option bursting '1'
	option ff '1'
	option country 'US'
	option txpower '23'
	option channel '112'

config wifi-device 'radio1'
	option type 'mac80211'
	option hwmode '11g'
	option path 'platform/qca955x_wmac'
	option noscan '1'
	option htmode 'HT40'
	option distance '15'
	option multicast_querier '0'
	option igmp_snooping '0'
	option log_level '3'
	option compression '1'
	option bursting '1'
	option ff '1'
	option channel '9'
	option country 'US'
	option txpower '24'
	option disabled '0'

config wifi-iface
	option encryption 'psk2'
	option device 'radio0'
	**option mode 'sta'**
	option bssid '08:96:D7:7B:89:BA'
	option key 'xxxxxxxxxxxxxxxxxxxxxx'
	option multicast_querier '0'
	option igmp_snooping '0'
	option ssid 'Fritz_5Ghz'
	option network 'WWAN WWAN6'

config wifi-iface
	option ssid 'im6shop'
	option device 'radio1'
	option key 'xxxxxxxxxxxxxxxxxxxxxx'
	option multicast_querier '0'
	option igmp_snooping '0'
	option network 'LAN'
	option mode 'ap'
	option encryption 'psk2'

config wifi-iface
	option device 'radio0'
	**option mode 'ap'**
	option key 'xxxxxxxxxxxxxxxxxxxxxx'
	option macfilter 'allow'
	list maclist '78:0C:B8:8A:12:45'
	list maclist '88:32:9B:F6:70:79'
	list maclist 'F0:27:65:7F:7A:19'
	option encryption 'psk2+ccmp'
	option network 'LAN'
	option ssid 'im6shop'

If you need further details, let me know

regards Klaus


15.11.20171170KernelBug ReportVery LowCriticalmt7621: kernel errors - rcu_sched detected stalls on CP...AllUnconfirmed Task Description

After the work done for issue  FS#804 , the rcu_sched error seemed to be gone. However, I am now starting to see it again. Usually, at least for me, the error happens when there is large amounts of traffic and I do something with the network. My most reliable way for reproducing the error is as follows:

- Use iperf to flood a router with small packets. Other ways to stress the CPU also work, I for example triggered the error when I added very aggressive logging to the firewall.
- While the router is being flooded, I restarted networking (I am logged in to the router via UART).
- After a couple of network restarts, the error is trigger and the following is written to syslog at some interval:

[ 2251.870000] INFO: rcu_bh detected stalls on CPUs/tasks:
[ 2251.870000] 2-...: (1 GPs behind) idle=ae1/140000000000001/0 softirq=212487/217796 fqs=4380
[ 2251.870000] (detected by 1, t=6002 jiffies, g=-146, c=-147, q=4)
[ 2251.870000] Task dump for CPU 2:
[ 2251.870000] openvpn-mover.s R running 0 2598 1 0×08100004 [ 2251.870000] Stack : 8fa69998 800ebe38 00000000 8fa69998 57512e2b 000001fd 00000000 80035454
[ 2251.870000] 00000000 800edbd4 8fa69998 804b0000 00000000 00000000 00000004 00000000
[ 2251.870000] 00000000 8ea17850 8efc7ec0 800376d4 00000000 00000000 778b8930 00000012
[ 2251.870000] 00000000 004077cd 778d4000 00000000 778d55e8 778d6f7c 00000000 8002b280
[ 2251.870000] ffbffeff ffffffff 00617772 706d742f 00000000 00000000 00000001 800379dc
[ 2251.870000] ...
[ 2251.870000] Call Trace:
[ 2251.870000] [<8000bc88>] __schedule+0×574/0×758

I am also able to sometimes trigger the issue by simply issuing the reboot-command (while the CPU is stressed). I have not applied any traffic shaping to my interface, and I see the error both with kernel 4.4 and 4.9 (i.e., LEDE 17.01 and master). I don’t quite know how to progress in debugging this.

 


25.01.20181300Base systemBug ReportVery LowCriticalRT-N12+(MT7620N): WLAN not working.TrunkUnconfirmed Task Description

Hello,

Device: RT-N12+
Issue: WLAN is not working properly. When enabled the signal status shows 0db noise 0db. Wireless devices would properly show the SSID however unable to join. Even with No encryption. The system log would even show that radio0 is up.
Steps done:
- Reboot Router
- Re-flash firmware
- Manually set WiFi config: Band 20mhz or 40mhz.
- Toggled between N and Legacy.
- Manually set WiFi channels.
- Tried different encryption.

Additional information:
- I am well aware that this router support is still WIP as stated: https://lede-project.org/toh/hwdata/asus/asus_rt-n12 Basically just putting out this bug report since so far everything seemed fine except for wireless broadcast.
- Used latest snapshot build from downloads page dated: Thu Jan 25 12:07:37 2018

28.01.20181307Base systemBug ReportVery LowCriticalClearFog initramfs broken AllUnconfirmed Task Description

It appears this has been broken for quite some time, likely before LEDE forked from OpenWrt, as there are CC builds with initrams images working fine (early 2016), however the CC repo no longer compiles a working initrams image, nor does LEDE.

  • The changes causing the issue appear to have occurred between 2016.02.18 and 2016.09.06
    • I have a working OpenWrt initramfs image created 2016.02.17 @14:26:46 UTC which boots w/o issue.
    • This post from the SolidRun forum on 2016.09.06 @ 10:30am (local) verifies boot issues occurring at least as of this date.
      • Xue Liu’s [clockworkbird9] repo is mentioned and a link to his blog is provided, however he either forked OpenWrt prior to the issue originating or fixed whatever was broken.

Unexpected Output

Current LEDE/OpenWrt initramfs image is a mess all around (Compiled 2018.01.25)

   Marvell>> tftpboot lede-mvebu-armada-388-clearfog-pro-initramfs.bin
   Using egiga1 device
   TFTP from server 10.4.50.38; our IP address is 10.4.50.170
   Filename 'lede-mvebu-armada-388-clearfog-pro-initramfs.bin'.
   Load address: 0x2000000
   Loading: #################################################################
	        #################################################################
	        #################################################################
	        2.4 MiB/s
   done
   Bytes transferred = 4690096 (4790b0 hex)
 
   Marvell>> bootm
   Wrong Image Format for bootm command
   ERROR: cant get kernel image!
  • Likely due to these options being removed from menuconfig:
    • Target Images
      • Include kernel in root filesystem
        • include uImage
        • include zImage
        • include FIT
      • Include DTB in root filesystem
    • See Screenshot
      • Left: Old OpenWrt Repo
      • Right: Current LEDE/OpenWrt Repo

Booting a LEDE zImage goes a bit better (...until the kernel panic | Compiled 2018.01.25)

  • This may be expected behavior, as I didn’t realize the zImage is the kernel image.
    Marvell>> tftpboot zImage-Solidrun-Clearfog-A1                 
    Using egiga1 device
    TFTP from server 10.4.50.38; our IP address is 10.4.50.170
    Filename 'zImage-Solidrun-Clearfog-A1'.
    Load address: 0x2000000
    Loading: #################################################################
    	 #################################################################
    	 #################################################################
    	 2.4 MiB/s
    done
    Bytes transferred = 2132324 (208964 hex)
    Marvell>> bootz
 
    Starting kernel ...
 
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Linux version 4.4.14 (thepeople@trabant) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 50140) ) #1 SMP Thu Dec 7 14:50:07 UTC 2017
    [    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [    0.000000] Machine model: SolidRun Clearfog A1
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] PERCPU: Embedded 12 pages/cpu @ef7ce000 s17984 r8192 d22976 u49152
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
    [    0.000000] Kernel command line: 
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Memory: 1032820K/1048576K available (4223K kernel code, 178K rwdata, 1572K rodata, 264K init, 301K bss, 15756K reserved, 0K cma-reserved, 262144K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    [    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc05b1078   (5797 kB)
    [    0.000000]       .init : 0xc05b2000 - 0xc05f4000   ( 264 kB)
    [    0.000000]       .data : 0xc05f4000 - 0xc0620a5c   ( 179 kB)
    [    0.000000]        .bss : 0xc0620a5c - 0xc066c244   ( 302 kB)
    [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
    [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
    [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
    [    0.000000] L2C-310 D prefetch enabled, offset 1 lines
    [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
    [    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
    [    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
    [    0.000000] Switching to timer-based delay loop, resolution 40ns
    [    0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
    [    0.000009] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
    [    0.000106] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
    [    0.000113] pid_max: default: 32768 minimum: 301
    [    0.000148] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000152] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000340] CPU: Testing write buffer coherency: ok
    [    0.000439] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.000465] Setting up static identity map for 0x8280 - 0x82d8
    [    0.000550] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0x4
    [    0.000633] mvebu-pmsu: Initializing Power Management Service Unit
    [    0.001026] Booting CPU 1
    [    0.001190] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.001218] Brought up 2 CPUs
    [    0.001223] SMP: Total of 2 processors activated (100.00 BogoMIPS).
    [    0.001226] CPU: All CPU(s) started in SVC mode.
    [    0.002883] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    [    0.002954] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    [    0.003000] pinctrl core: initialized pinctrl subsystem
    [    0.003380] NET: Registered protocol family 16
    [    0.003837] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [    0.029930] cpuidle: using governor ladder
    [    0.032504] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
    [    0.032512] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
    [    0.060714] SCSI subsystem initialized
    [    0.060995] usbcore: registered new interface driver usbfs
    [    0.061020] usbcore: registered new interface driver hub
    [    0.061042] usbcore: registered new device driver usb
    [    0.061712] clocksource: Switched to clocksource armada_370_xp_clocksource
    [    0.062143] NET: Registered protocol family 2
    [    0.062382] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.062424] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.062484] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.062516] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.062538] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.062619] NET: Registered protocol family 1
    [    0.062981] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.065945] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.065956] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    0.066587] bounce: pool size: 64 pages
    [    0.066594] io scheduler noop registered
    [    0.066599] io scheduler deadline registered (default)
    [    0.066978] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
    [    0.067276] irq: Cannot allocate irq_descs @ IRQ50, assuming pre-allocated
    [    0.067412] irq: Cannot allocate irq_descs @ IRQ82, assuming pre-allocated
    [    0.067660] mv_xor f1060800.xor: Marvell shared XOR driver
    [    0.101937] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
    [    0.102017] mv_xor f1060900.xor: Marvell shared XOR driver
    [    0.141919] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
    [    0.142055] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
    [    0.142889] console [ttyS0] disabled
    [    0.162961] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 15625000) is a 16550A
    [    0.715227] console [ttyS0] enabled
    [    0.738916] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 15625000) is a 16550A
    [    0.748295] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.757374] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
    [    0.766754] scsi host0: ahci-mvebu
    [    0.770314] scsi host1: ahci-mvebu
    [    0.773824] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 45
    [    0.781766] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 45
    [    0.789792] ahci-mvebu f10e0000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.798869] ahci-mvebu f10e0000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
    [    0.808345] scsi host2: ahci-mvebu
    [    0.811918] scsi host3: ahci-mvebu
    [    0.815415] ata3: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x100 irq 46
    [    0.823359] ata4: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x180 irq 46
    [    0.832327] libphy: Fixed MDIO Bus: probed
    [    0.836538] libphy: orion_mdio_bus: probed
    [    0.841803] mvneta f1030000.ethernet eth0: Using hardware mac address 00:50:43:4c:18:3b
    [    0.850637] mvneta f1034000.ethernet eth1: Using random mac address c6:31:9b:9c:a7:67
    [    0.859250] mvneta f1070000.ethernet eth2: Using hardware mac address 00:50:43:ee:18:3b
    [    0.867330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.873879] ehci-pci: EHCI PCI platform driver
    [    0.878359] ehci-platform: EHCI generic platform driver
    [    0.883691] ehci-orion: EHCI orion driver
    [    0.887777] orion-ehci f1058000.usb: EHCI Host Controller
    [    0.893203] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
    [    0.900847] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000
    [    0.921501] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
    [    0.927667] hub 1-0:1.0: USB hub found
    [    0.931437] hub 1-0:1.0: 1 port detected
    [    0.935663] xhci-hcd f10f0000.usb3: xHCI Host Controller
    [    0.940994] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
    [    0.948605] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
    [    0.957170] xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000
    [    0.963146] hub 2-0:1.0: USB hub found
    [    0.966914] hub 2-0:1.0: 1 port detected
    [    0.970927] xhci-hcd f10f0000.usb3: xHCI Host Controller
    [    0.976265] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
    [    0.983796] usb usb3: We dont know the algorithms for LPM for this host, disabling LPM.
    [    0.992105] hub 3-0:1.0: USB hub found
    [    0.995872] hub 3-0:1.0: 1 port detected
    [    0.999930] xhci-hcd f10f8000.usb3: xHCI Host Controller
    [    1.005271] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
    [    1.012863] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
    [    1.021422] xhci-hcd f10f8000.usb3: irq 49, io mem 0xf10f8000
    [    1.027391] hub 4-0:1.0: USB hub found
    [    1.031159] hub 4-0:1.0: 1 port detected
    [    1.035201] xhci-hcd f10f8000.usb3: xHCI Host Controller
    [    1.040528] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
    [    1.048072] usb usb5: We dont know the algorithms for LPM for this host, disabling LPM.
    [    1.056389] hub 5-0:1.0: USB hub found
    [    1.060156] hub 5-0:1.0: 1 port detected
    [    1.064290] usbcore: registered new interface driver usb-storage
    [    1.070460] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
    [    1.078105] i2c /dev entries driver
    [    1.092469] orion_wdt: Initial timeout 171 sec
    [    1.097786] marvell-cesa f1090000.crypto: CESA device successfully registered
    [    1.105445] NET: Registered protocol family 10
    [    1.110382] NET: Registered protocol family 17
    [    1.114870] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
    [    1.127526] Bridge firewalling registered
    [    1.131551] 8021q: 802.1Q VLAN Support v1.8
    [    1.135771] Registering SWP/SWPB emulation handler
    [    1.141319] armada38x-rtc f10a3800.rtc: setting system clock to 1970-06-02 16:51:43 UTC (13193503)
    [    1.141517] ata1: SATA link down (SStatus 0 SControl 300)
    [    1.141542] ata2: SATA link down (SStatus 0 SControl 300)
    [    1.161504] ata4: SATA link down (SStatus 0 SControl 300)
    [   1.166942] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.172389] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
    [    1.179889] Please append a correct "root=" boot option; here are the available partitions:
    [    1.188270] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
    [    1.196553] CPU1: stopping
    [    1.199266] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.14 #1
    [    1.205198] Hardware name: Marvell Armada 380/385 (Device Tree)
    [    1.211142] [<c001fab8>] (unwind_backtrace) from [<c001c420>] (show_stack+0x10/0x14)
    [    1.218909] [<c001c420>] (show_stack) from [<c019f54c>] (dump_stack+0x8c/0xa0)
    [    1.226149] [<c019f54c>] (dump_stack) from [<c001e94c>] (handle_IPI+0x108/0x1a0)
    [    1.233563] [<c001e94c>] (handle_IPI) from [<c0009508>] (gic_handle_irq+0x80/0x94)
    [    1.241151] [<c0009508>] (gic_handle_irq) from [<c000a5f4>] (__irq_svc+0x54/0x70)
    [    1.248650] Exception stack(0xef073f80 to 0xef073fc8)
    [    1.253712] 3f80: 00000001 00000000 00000000 c000b3c0 ef072000 c05f6498 c04fcab4 00000000
    [    1.261909] 3fa0: c05ee224 ef073fd8 00000000 c05f1118 00000000 ef073fd0 c00194cc c00194d0
    [    1.270104] 3fc0: 60000013 ffffffff
    [    1.273600] [<c000a5f4>] (__irq_svc) from [<c00194d0>] (arch_cpu_idle+0x34/0x50)
    [    1.281015] [<c00194d0>] (arch_cpu_idle) from [<c005b324>] (cpu_startup_entry+0x148/0x210)
    [    1.289298] [<c005b324>] (cpu_startup_entry) from [<000095ac>] (0x95ac)
    [    1.295928] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

Current OpenWrt CC initramfs freezes upon loading the kernel (Compiled 2018.01.27)

   Marvell>> tftpboot openwrt-mvebu-armada-388-clearfog-initramfs
   Using egiga1 device
   TFTP from server 10.4.50.38; our IP address is 10.4.50.170
   Filename 'openwrt-mvebu-armada-388-clearfog-initramfs'.
   Load address: 0x2000000
   Loading: #################################################################
	        #################################################################
	        #################################################################
	        2.4 MiB/s
   done
   Bytes transferred = 7925725 (78efdd hex)
 
   Marvell>> bootm
   ## Booting kernel from Legacy Image at 02000000 ...
      Image Name:   ARM OpenWrt Linux-3.18.91
      Created:      2018-01-27   3:22:24 UTC
      Image Type:   ARM Linux Kernel Image (uncompressed)
      Data Size:    7925661 Bytes = 7.6 MiB
      Load Address: 00008000
      Entry Point:  00008000
      Verifying Checksum ... OK
      Loading Kernel Image ... OK
   OK
 
   Starting kernel ...
  • It freezes at this point, with no further output

Expected Output (working initramfs)

r48735 (Compiled 2016.02.17)

    Marvell>> tftpboot openwrt-mvebu-armada-388-clearfog-initramfs
    Using egiga1 device
    TFTP from server 10.4.50.38; our IP address is 10.4.50.170
    Filename 'openwrt-mvebu-armada-388-clearfog-initramfs'.
    Load address: 0x2000000
    Loading: #################################################################
    	  #################################################################
    	  #################################################################
    	  2.4 MiB/s
    done
    Bytes transferred = 3022310 (2e1de6 hex)
 
    Marvell>> bootm
    ## Booting kernel from Legacy Image at 02000000 ...
       Image Name:   ARM OpenWrt Linux-4.1.16
       Created:      2016-02-17  14:26:46 UTC
       Image Type:   ARM Linux Kernel Image (uncompressed)
       Data Size:    3022246 Bytes = 2.9 MiB
       Load Address: 00008000
       Entry Point:  00008000
       Verifying Checksum ... OK
       Loading Kernel Image ... OK
    OK
 
    Starting kernel ...
 
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Linux version 4.1.16 (vlado@b50) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r48723) ) #6 SMP Wed Feb 17 14:59:16 UTC 2016
    [    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [    0.000000] Machine model: SolidRun Clearfog A1
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] PERCPU: Embedded 10 pages/cpu @eefd1000 s11776 r8192 d20992 u40960
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
    [    0.000000] Kernel command line: 
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Memory: 1029820K/1048576K available (3435K kernel code, 138K rwdata, 1228K rodata, 4592K init, 168K bss, 18756K reserved, 0K cma-reserved, 270336K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc0495e9c   (4664 kB)
    [    0.000000]       .init : 0xc0496000 - 0xc0912000   (4592 kB)
    [    0.000000]       .data : 0xc0912000 - 0xc09348dc   ( 139 kB)
    [    0.000000]        .bss : 0xc09348dc - 0xc095e9a4   ( 169 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
    [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
    [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
    [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
    [    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
    [    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x46070001
    [    0.000006] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
    [    0.000016] clocksource armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
    [    0.000157] Calibrating delay loop... 3188.32 BogoMIPS (lpj=15941632)
    [    0.059922] pid_max: default: 32768 minimum: 301
    [    0.059975] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.059980] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.060187] CPU: Testing write buffer coherency: ok
    [    0.060286] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.060311] Setting up static identity map for 0x8280 - 0x82d8
    [    0.060398] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0x4
    [    0.060484] mvebu-pmsu: Initializing Power Management Service Unit
    [    0.060915] Booting CPU 1
    [    0.119940] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.119969] Brought up 2 CPUs
    [    0.119975] SMP: Total of 2 processors activated (6384.02 BogoMIPS).
    [    0.119978] CPU: All CPU(s) started in SVC mode.
    [    0.121764] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    [    0.121843] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    [    0.121875] pinctrl core: initialized pinctrl subsystem
    [    0.122216] NET: Registered protocol family 16
    [    0.122655] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [    0.149929] cpuidle: using governor ladder
    [    0.152518] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
    [    0.152527] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling[    0.180892] Switched to clocksource armada_370_xp_clocksource
    [    0.181354] NET: Registered protocol family 2
    [    0.181626] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.181665] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.181728] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.181766] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.181790] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.181897] NET: Registered protocol family 1
    [    0.202800] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.203086] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.203094] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    0.203620] bounce: pool size: 64 pages
    [    0.203629] io scheduler noop registered
    [    0.203635] io scheduler deadline registered (default)
    [    0.204062] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
    [    0.204398] irq: Cannot allocate irq_descs @ IRQ48, assuming pre-allocated
    [    0.204557] irq: Cannot allocate irq_descs @ IRQ80, assuming pre-allocated
    [    0.204865] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
    [    0.204873] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
    [    0.204878] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
    [    0.204883] pci_bus 0000:00: root bus resource [bus 00-ff]
    [    0.205081] PCI: bus0: Fast back to back transfers disabled
    [    0.205087] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [    0.205094] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [    0.205147] PCI: bus1: Fast back to back transfers enabled
    [    0.205205] PCI: bus2: Fast back to back transfers enabled
    [    0.205227] pci 0000:00:02.0: PCI bridge to [bus 01]
    [    0.205235] pci 0000:00:03.0: PCI bridge to [bus 02]
    [    0.205319] mv_xor f1060800.xor: Marvell shared XOR driver
    [    0.240922] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
    [    0.280920] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
    [    0.280980] mv_xor f1060900.xor: Marvell shared XOR driver
    [    0.320931] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
    [    0.360921] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
    [    0.361040] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
    [    0.361326] console [ttyS0] disabled
    [    0.381355] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 15625000) is a 16550A
    [    0.965181] console [ttyS0] enabled
    [    0.988835] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 15625000) is a 16550A
    [    0.998710] libphy: Fixed MDIO Bus: probed
    [    1.002938] libphy: orion_mdio_bus: probed
    [    1.008077] mvneta f1030000.ethernet eth0: Using hardware mac address 00:50:43:11:03:0d
    [    1.016851] mvneta f1034000.ethernet eth1: Using random mac address fa:fb:df:f9:5e:cc
    [    1.025385] mvneta f1070000.ethernet eth2: Using hardware mac address 00:50:43:0b:03:0d
    [    1.033899] NET: Registered protocol family 10
    [    1.038792] NET: Registered protocol family 17
    [    1.043270] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
    [    1.055917] 8021q: 802.1Q VLAN Support v1.8
    [    1.060127] Registering SWP/SWPB emulation handler
    [    1.065542] hctosys: unable to open rtc device (rtc0)
    [    1.073694] Freeing unused kernel memory: 4592K (c0496000 - c0912000)
    [    1.084136] init: Console is alive
    [    1.092498] usbcore: registered new interface driver usbfs
    [    1.098025] usbcore: registered new interface driver hub
    [    1.103400] usbcore: registered new device driver usb
    [    1.110084] SCSI subsystem initialized
    [    1.114896] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.121693] ehci-platform: EHCI generic platform driver
    [    1.127263] ehci-orion: EHCI orion driver
    [    1.131413] orion-ehci f1058000.usb: EHCI Host Controller
    [    1.136834] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
    [    1.144492] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000
    [    1.160910] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
    [    1.167093] hub 1-0:1.0: USB hub found
    [    1.170862] hub 1-0:1.0: 1 port detected
    [    1.179139] xhci-hcd f10f0000.usb3: xHCI Host Controller
    [    1.184488] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
    [    1.192080] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
    [    1.200644] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
    [    1.206652] hub 2-0:1.0: USB hub found
    [    1.210421] hub 2-0:1.0: 1 port detected
    [    1.214450] xhci-hcd f10f0000.usb3: xHCI Host Controller
    [    1.219779] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
    [    1.227335] usb usb3: We dont know the algorithms for LPM for this host, disabling LPM.
    [    1.235651] hub 3-0:1.0: USB hub found
    [    1.239417] hub 3-0:1.0: 1 port detected
    [    1.243492] xhci-hcd f10f8000.usb3: xHCI Host Controller
    [    1.248823] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
    [    1.256412] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
    [    1.264975] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
    [    1.270975] hub 4-0:1.0: USB hub found
    [    1.274743] hub 4-0:1.0: 1 port detected
    [    1.278759] xhci-hcd f10f8000.usb3: xHCI Host Controller
    [    1.284092] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
    [    1.291620] usb usb5: We dont know the algorithms for LPM for this host, disabling LPM.
    [    1.299925] hub 5-0:1.0: USB hub found
    [    1.303697] hub 5-0:1.0: 1 port detected
    [    1.308557] usbcore: registered new interface driver usb-storage
    [    2.087795] init: - preinit -
    Press the [f] key and hit [enter] to enter failsafe mode
    Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
    [    5.131673] procd: - early -
    [    5.706452] procd: - ubus -
    [    6.710759] random: ubusd urandom read with 0 bits of entropy available
    [    6.717649] procd: - init -
    Please press Enter to activate this console.
    [    6.863841] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [    6.871496] i2c /dev entries driver
    [    6.876831] ip_tables: (C) 2000-2006 Netfilter Core Team
    [    6.884031] nf_conntrack version 0.5.0 (16162 buckets, 64648 max)
    [    7.074295] xt_time: kernel timezone is -0000
    [    7.091235] PPP generic driver version 2.4.2
    [    7.095849] NET: Registered protocol family 24
    [    8.723584] device eth0 entered promiscuous mode
    [    8.728953] br-lan: port 1(eth0) entered forwarding state
    [    8.734388] br-lan: port 1(eth0) entered forwarding state
    [    8.751499] device eth1 entered promiscuous mode
    [    8.756174] br-lan: port 2(eth1) entered forwarding state
    [    8.761615] br-lan: port 2(eth1) entered forwarding state
    [    8.781126] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
    [    9.720913] br-lan: port 1(eth0) entered disabled state
    [    9.726221] br-lan: port 2(eth1) entered disabled state
    [   10.730912] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
    [   10.738772] br-lan: port 1(eth0) entered forwarding state
    [   10.744197] br-lan: port 1(eth0) entered forwarding state
    [   10.750020] mvneta f1034000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
    [   10.757942] br-lan: port 2(eth1) entered forwarding state
    [   10.763366] br-lan: port 2(eth1) entered forwarding state
    [   12.740888] br-lan: port 1(eth0) entered forwarding state
    [   12.760887] br-lan: port 2(eth1) entered forwarding state
 
 
    BusyBox v1.24.1 () built-in shell (ash)
 
      _______                     ________        __
     |       |.-----.-----.-----.|  |  |  |.----.|  |_
     |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
     |_______||   __|_____|__|__||________||__|  |____|
              |__| W I R E L E S S   F R E E D O M
     -----------------------------------------------------
     DESIGNATED DRIVER (Bleeding Edge, r48735)
     -----------------------------------------------------
      * 2 oz. Orange Juice         Combine all juices in a
      * 2 oz. Pineapple Juice      tall glass filled with
      * 2 oz. Grapefruit Juice     ice, stir well.
      * 2 oz. Cranberry Juice
     -----------------------------------------------------
    root@OpenWrt:/#

r49395 (Compiled 2018.01.27 | Xue Liu’s OpenWrt Repo)

   Marvell>> tftpboot openwrt-mvebu-armada-388-clearfog-initramfs
   Using egiga1 device
   TFTP from server 10.4.50.38; our IP address is 10.4.50.170
   Filename 'openwrt-mvebu-armada-388-clearfog-initramfs'.
   Load address: 0x2000000
   Loading: #################################################################
   	  #################################################################
   	  #################################################################
   	  2.4 MiB/s
   done
   Bytes transferred = 3920894 (3bd3fe hex)
   Marvell>> bootm
   ## Booting kernel from Legacy Image at 02000000 ...
      Image Name:   ARM OpenWrt Linux-4.1.23
      Created:      2016-06-30   5:39:05 UTC
      Image Type:   ARM Linux Kernel Image (uncompressed)
      Data Size:    3920830 Bytes = 3.7 MiB
      Load Address: 00008000
      Entry Point:  00008000
      Verifying Checksum ... OK
      Loading Kernel Image ... OK
   OK
 
   Starting kernel ...
 
   [    0.000000] Booting Linux on physical CPU 0x0
   [    0.000000] Linux version 4.1.23 (jw@u17) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 r49395) ) #2 SMP Sat Jan 27 05:52:51 UTC 2018
   [    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
   [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
   [    0.000000] Machine model: SolidRun Clearfog A1
   [    0.000000] Memory policy: Data cache writealloc
   [    0.000000] PERCPU: Embedded 10 pages/cpu @eefd1000 s11776 r8192 d20992 u40960
   [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
   [    0.000000] Kernel command line: 
   [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
   [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
   [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
   [    0.000000] Memory: 1026868K/1048576K available (3435K kernel code, 138K rwdata, 1228K rodata, 7544K init, 168K bss, 21708K reserved, 0K cma-reserved, 270336K highmem)
   [    0.000000] Virtual kernel memory layout:
   [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
   [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
   [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
   [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
   [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
   [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
   [    0.000000]       .text : 0xc0008000 - 0xc0495e9c   (4664 kB)
   [    0.000000]       .init : 0xc0496000 - 0xc0bf4000   (7544 kB)
   [    0.000000]       .data : 0xc0bf4000 - 0xc0c1694c   ( 139 kB)
   [    0.000000]        .bss : 0xc0c1694c - 0xc0c40a24   ( 169 kB)
   [    0.000000] Hierarchical RCU implementation.
   [    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
   [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
   [    0.000000] NR_IRQS:16 nr_irqs:16 16
   [    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
   [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
   [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
   [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
   [    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
   [    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x46070001
   [    0.000006] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
   [    0.000016] clocksource armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
   [    0.000156] Calibrating delay loop... 3188.32 BogoMIPS (lpj=15941632)
   [    0.059921] pid_max: default: 32768 minimum: 301
   [    0.059975] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
   [    0.059980] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
   [    0.060187] CPU: Testing write buffer coherency: ok
   [    0.060287] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
   [    0.060312] Setting up static identity map for 0x8280 - 0x82d8
   [    0.060399] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0x4
   [    0.060486] mvebu-pmsu: Initializing Power Management Service Unit
   [    0.060919] Booting CPU 1
   [    0.119939] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
   [    0.119968] Brought up 2 CPUs
   [    0.119974] SMP: Total of 2 processors activated (6384.02 BogoMIPS).
   [    0.119977] CPU: All CPU(s) started in SVC mode.
   [    0.121712] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
   [    0.121790] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
   [    0.121823] pinctrl core: initialized pinctrl subsystem
   [    0.122159] NET: Registered protocol family 16
   [    0.122595] DMA: preallocated 256 KiB pool for atomic coherent allocations
   [    0.149921] cpuidle: using governor ladder
   [    0.152478] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
   [    0.152487] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling[    0.180937] Switched to clocksource armada_370_xp_clocksource
   [    0.181394] NET: Registered protocol family 2
   [    0.181808] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
   [    0.181846] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
   [    0.181909] TCP: Hash tables configured (established 8192 bind 8192)
   [    0.181945] UDP hash table entries: 512 (order: 2, 16384 bytes)
   [    0.181969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
   [    0.182064] NET: Registered protocol family 1
   [    0.211472] futex hash table entries: 512 (order: 3, 32768 bytes)
   [    0.211907] squashfs: version 4.0 (2009/01/31) Phillip Lougher
   [    0.211916] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
   [    0.212261] bounce: pool size: 64 pages
   [    0.212269] io scheduler noop registered
   [    0.212276] io scheduler deadline registered (default)
   [    0.212708] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
   [    0.213051] irq: Cannot allocate irq_descs @ IRQ48, assuming pre-allocated
   [    0.213206] irq: Cannot allocate irq_descs @ IRQ80, assuming pre-allocated
   [    0.213509] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
   [    0.213517] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
   [    0.213525] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
   [    0.213531] pci_bus 0000:00: root bus resource [bus 00-ff]
   [    0.213721] PCI: bus0: Fast back to back transfers disabled
   [    0.213728] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
   [    0.213734] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
   [    0.213786] PCI: bus1: Fast back to back transfers enabled
   [    0.213847] PCI: bus2: Fast back to back transfers enabled
   [    0.213868] pci 0000:00:02.0: PCI bridge to [bus 01]
   [    0.213876] pci 0000:00:03.0: PCI bridge to [bus 02]
   [    0.213955] mv_xor f1060800.xor: Marvell shared XOR driver
   [    0.251038] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
   [    0.290970] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
   [    0.291030] mv_xor f1060900.xor: Marvell shared XOR driver
   [    0.330964] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
   [    0.370964] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
   [    0.371073] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
   [    0.371364] console [ttyS0] disabled
   [    0.391394] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 15625000) is a 16550A
   [    0.974982] console [ttyS0] enabled
   [    0.998634] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 15625000) is a 16550A
   [    1.008502] libphy: Fixed MDIO Bus: probed
   [    1.012730] libphy: orion_mdio_bus: probed
   [    1.017876] mvneta f1030000.ethernet eth0: Using hardware mac address 00:50:43:5a:07:04
   [    1.026640] mvneta f1034000.ethernet eth1: Using random mac address d6:15:0c:61:68:d9
   [    1.035175] mvneta f1070000.ethernet eth2: Using hardware mac address 00:50:43:0a:07:04
   [    1.043675] NET: Registered protocol family 10
   [    1.048569] NET: Registered protocol family 17
   [    1.053061] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
   [    1.065708] 8021q: 802.1Q VLAN Support v1.8
   [    1.069920] Registering SWP/SWPB emulation handler
   [    1.075317] hctosys: unable to open rtc device (rtc0)
   [    1.084968] Freeing unused kernel memory: 7544K (c0496000 - c0bf4000)
   [    1.095444] init: Console is alive
   [    1.105049] usbcore: registered new interface driver usbfs
   [    1.110581] usbcore: registered new interface driver hub
   [    1.115954] usbcore: registered new device driver usb
   [    1.126902] SCSI subsystem initialized
   [    1.131749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
   [    1.138544] ehci-platform: EHCI generic platform driver
   [    1.144141] ehci-orion: EHCI orion driver
   [    1.148257] orion-ehci f1058000.usb: EHCI Host Controller
   [    1.153689] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
   [    1.161343] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000
   [    1.180940] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
   [    1.187137] hub 1-0:1.0: USB hub found
   [    1.190909] hub 1-0:1.0: 1 port detected
   [    1.199341] xhci-hcd f10f0000.usb3: xHCI Host Controller
   [    1.204699] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
   [    1.212291] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
   [    1.220854] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
   [    1.226864] hub 2-0:1.0: USB hub found
   [    1.230634] hub 2-0:1.0: 1 port detected
   [    1.234670] xhci-hcd f10f0000.usb3: xHCI Host Controller
   [    1.239997] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
   [    1.247530] usb usb3: We dont know the algorithms for LPM for this host, disabling LPM.
   [    1.255845] hub 3-0:1.0: USB hub found
   [    1.259613] hub 3-0:1.0: 1 port detected
   [    1.263710] xhci-hcd f10f8000.usb3: xHCI Host Controller
   [    1.269041] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
   [    1.276630] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
   [    1.285195] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
   [    1.291190] hub 4-0:1.0: USB hub found
   [    1.294958] hub 4-0:1.0: 1 port detected
   [    1.298974] xhci-hcd f10f8000.usb3: xHCI Host Controller
   [    1.304309] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
   [    1.311842] usb usb5: We dont know the algorithms for LPM for this host, disabling LPM.
   [    1.320147] hub 5-0:1.0: USB hub found
   [    1.323921] hub 5-0:1.0: 1 port detected
   [    1.329839] sdhci: Secure Digital Host Controller Interface driver
   [    1.336054] sdhci: Copyright(c) Pierre Ossman
   [    1.340684] sdhci-pltfm: SDHCI platform and OF driver helper
   [    1.347178] usbcore: registered new interface driver usb-storage
   [    1.360572] init: - preinit -
   Press the [f] key and hit [enter] to enter failsafe mode
   Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
   [    4.406424] procd: - early -
   [    4.965685] procd: - ubus -
   [    5.019086] random: ubusd urandom read with 0 bits of entropy available
   [    5.025976] procd: - init -
   Please press Enter to activate this console.
   [    5.196134] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
   [    5.207844] ip6_tables: (C) 2000-2006 Netfilter Core Team
   [    5.215742] i2c /dev entries driver
   [    5.221208] ip_tables: (C) 2000-2006 Netfilter Core Team
   [    5.228628] nf_conntrack version 0.5.0 (16162 buckets, 64648 max)
   [    5.414558] xt_time: kernel timezone is -0000
   [    5.431616] PPP generic driver version 2.4.2
   [    5.436259] NET: Registered protocol family 24
   [    7.114973] device eth0 entered promiscuous mode
   [    7.122099] br-lan: port 1(eth0) entered forwarding state
   [    7.127527] br-lan: port 1(eth0) entered forwarding state
   [    7.148077] device eth1 entered promiscuous mode
   [    7.152853] br-lan: port 2(eth1) entered forwarding state
   [    7.158270] br-lan: port 2(eth1) entered forwarding state
   [    7.173015] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
   [    8.110954] br-lan: port 1(eth0) entered disabled state
   [    8.116262] br-lan: port 2(eth1) entered disabled state
   [    9.120956] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
   [    9.128814] br-lan: port 1(eth0) entered forwarding state
   [    9.134240] br-lan: port 1(eth0) entered forwarding state
   [    9.140957] mvneta f1034000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
   [    9.148813] br-lan: port 2(eth1) entered forwarding state
   [    9.154235] br-lan: port 2(eth1) entered forwarding state
   [   11.130932] br-lan: port 1(eth0) entered forwarding state
   [   11.150930] br-lan: port 2(eth1) entered forwarding state
 
   BusyBox v1.24.2 () built-in shell (ash)
   Enter 'help' for a list of built-in commands.
      _______                     ________        __
    |       |.-----.-----.-----.|  |  |  |.----.|  |_
    |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
    |_______||   __|_____|__|__||________||__|  |____|
             |__| W I R E L E S S   F R E E D O M
    -----------------------------------------------------
    DESIGNATED DRIVER (Bleeding Edge, r49395)
    -----------------------------------------------------
     * 2 oz. Orange Juice         Combine all juices in a
     * 2 oz. Pineapple Juice      tall glass filled with
     * 2 oz. Grapefruit Juice     ice, stir well.
     * 2 oz. Cranberry Juice
    -----------------------------------------------------
   root@OpenWrt:/#
01.02.20181320KernelBug ReportVery LowCriticalcritical crash and restartTrunkUnconfirmed Task Description

There is a random crash all network stop and the router restart .

I’m using last dev build .

Linksys WRT1900ACS

OpenWrt SNAPSHOT r5985-33e8f7e / LuCI Master (git-18.030.59690-47d1eaa)

Kernel 4.9.77

root@OpenWrt:~# cat /sys/kernel/debug/crashlog
Time: 1517518692.641321
Modules:        pppoe@bf1a6000+1e77     ppp_async@bf1a1000+1911 pppox@bf19d000+567      ppp_generic@bf193000+5218       iptable_nat@bf18a000+451        ipt_REJECT@bf186000+3ea ipt_MASQUERADE@bf182000+332     xt_time@bf17e000+6a6    xt_tcpudp@bf17a000+758       xt_state@bf176000+349   xt_nat@bf172000+59d     xt_multiport@bf16e000+554       xt_mark@bf16a000+320    xt_mac@bf166000+2c7     xt_limit@bf162000+48d   xt_conntrack@bf15e000+958       xt_comment@bf15a000+24b xt_TCPMSS@bf156000+a68       xt_REDIRECT@bf152000+375        xt_LOG@bf14e000+3c3     xt_CT@bf14a000+b55      slhc@bf146000+fd2       nf_reject_ipv4@bf142000+803     nf_nat_redirect@bf13e000+3db    nf_nat_masquerade_ipv4@bf13a000+60d     nf_conntrack_ipv4@bf135000+17e5      nf_nat_ipv4@bf131000+f1e        nf_nat@bf12b000+24c0    nf_log_ipv4@bf127000+c36        nf_defrag_ipv4@bf123000+3bc     nf_conntrack_rtcache@bf11f000+a92       nf_conntrack@bf10b000+e773      iptable_mangle@bf107000+3fc  iptable_filter@bf103000+37c     ip_tables@bf0fd000+2817 crc_ccitt@bf0f9000+42b  mwlwifi@bf0d6000+1b6d5  mac80211@bf068000+5f891 cfg80211@bf02e000+311b5 compat@bf029000+12f5    ip6t_REJECT@bf025000+3ec        nf_reject_ipv6@bf021000+908  nf_log_ipv6@bf01d000+cf7        nf_log_common@bf019000+98f      ip6table_mangle@bf015000+4be    ip6table_filter@bf011000+33e    ip6_tables@bf00b000+2715        x_tables@bf005000+2aac  gpio_button_hotplug@bf000000+1784
<7>[   17.893444] ieee80211 phy0: change: 0x40
<7>[   17.911298] ieee80211 phy1: change: 0x40
<7>[   18.111289] ieee80211 phy0: change: 0x40
<7>[   18.121292] ieee80211 phy1: change: 0x40
<7>[   18.321297] ieee80211 phy1: change: 0x40
<7>[   18.331297] ieee80211 phy0: change: 0x40
<7>[   18.521292] ieee80211 phy1: change: 0x40
<7>[   18.551290] ieee80211 phy0: change: 0x40
<7>[   18.721288] ieee80211 phy1: change: 0x40
<7>[   18.771289] ieee80211 phy0: change: 0x40
<7>[   18.931296] ieee80211 phy1: change: 0x40
<7>[   18.991298] ieee80211 phy0: change: 0x40
<7>[   19.020305] ieee80211 phy1: change: 0x100
<7>[   19.029330] ieee80211 phy1: change: 0x100
<7>[   19.038371] ieee80211 phy1: change: 0x40
<7>[   19.211298] ieee80211 phy0: change: 0x40
<7>[   19.241292] ieee80211 phy1: change: 0x40
<7>[   19.431290] ieee80211 phy0: change: 0x40
<7>[   19.441292] ieee80211 phy1: change: 0x40
<7>[   19.641290] ieee80211 phy1: change: 0x40
<7>[   19.651294] ieee80211 phy0: change: 0x60
<7>[   19.851295] ieee80211 phy1: change: 0x40
<7>[   19.871292] ieee80211 phy0: change: 0x40
<7>[   20.051291] ieee80211 phy1: change: 0x40
<7>[   20.091295] ieee80211 phy0: change: 0x40
<7>[   20.271295] ieee80211 phy1: change: 0x40
<7>[   20.311290] ieee80211 phy0: change: 0x40
<7>[   20.471289] ieee80211 phy1: change: 0x40
<7>[   20.531292] ieee80211 phy0: change: 0x40
<7>[   20.681288] ieee80211 phy1: change: 0x40
<7>[   20.751289] ieee80211 phy0: change: 0x40
<7>[   20.881292] ieee80211 phy1: change: 0x40
<7>[   20.971288] ieee80211 phy0: change: 0x40
<7>[   21.081288] ieee80211 phy1: change: 0x40
<7>[   21.191289] ieee80211 phy0: change: 0x40
<7>[   21.291292] ieee80211 phy1: change: 0x40
<7>[   21.411291] ieee80211 phy0: change: 0x40
<7>[   21.491290] ieee80211 phy1: change: 0x40
<7>[   21.631288] ieee80211 phy0: change: 0x40
<7>[   21.691293] ieee80211 phy1: change: 0x40
<7>[   21.780306] ieee80211 phy1: change: 0x100
<7>[   21.789330] ieee80211 phy1: change: 0x100
<7>[   21.798374] ieee80211 phy1: change: 0x40
<7>[   21.851290] ieee80211 phy0: change: 0x40
<7>[   22.001288] ieee80211 phy1: change: 0x40
<7>[   22.071295] ieee80211 phy0: change: 0x60
<7>[   22.175310] ieee80211 phy0: change: 0x100
<7>[   22.184332] ieee80211 phy0: change: 0x100
<7>[   22.193444] ieee80211 phy0: change: 0x40
<7>[   22.201309] ieee80211 phy1: change: 0x40
<7>[   22.411296] ieee80211 phy1: change: 0x40
<7>[   22.411298] ieee80211 phy0: change: 0x40
<7>[   22.611290] ieee80211 phy1: change: 0x40
<7>[   22.631293] ieee80211 phy0: change: 0x40
<7>[   22.811293] ieee80211 phy1: change: 0x40
<7>[   22.851290] ieee80211 phy0: change: 0x40
<7>[   23.011290] ieee80211 phy1: change: 0x40
<7>[   23.081291] ieee80211 phy0: change: 0x40
<7>[   23.221291] ieee80211 phy1: change: 0x40
<7>[   23.301289] ieee80211 phy0: change: 0x40
<7>[   23.421287] ieee80211 phy1: change: 0x40
<7>[   23.531289] ieee80211 phy0: change: 0x40
<7>[   23.621289] ieee80211 phy1: change: 0x40
<7>[   23.751294] ieee80211 phy0: change: 0x40
<7>[   23.821289] ieee80211 phy1: change: 0x40
<7>[   23.971291] ieee80211 phy0: change: 0x60
<7>[   24.031292] ieee80211 phy1: change: 0x40
<7>[   24.201295] ieee80211 phy0: change: 0x40
<7>[   24.231289] ieee80211 phy1: change: 0x40
<7>[   24.421288] ieee80211 phy0: change: 0x40
<7>[   24.431294] ieee80211 phy1: change: 0x40
<7>[   24.520307] ieee80211 phy1: change: 0x100
<7>[   24.529329] ieee80211 phy1: change: 0x100
<7>[   24.538373] ieee80211 phy1: change: 0x40
<7>[   24.641294] ieee80211 phy0: change: 0x40
<7>[   24.741289] ieee80211 phy1: change: 0x40
<7>[   24.861288] ieee80211 phy0: change: 0x40
<7>[   24.951295] ieee80211 phy1: change: 0x40
<7>[   25.091294] ieee80211 phy0: change: 0x40
<7>[   25.151291] ieee80211 phy1: change: 0x40
<7>[   25.311289] ieee80211 phy0: change: 0x40
<7>[   25.351293] ieee80211 phy1: change: 0x40
<7>[   25.541292] ieee80211 phy0: change: 0x40
<7>[   25.551310] ieee80211 phy1: change: 0x40
<7>[   25.751295] ieee80211 phy1: change: 0x40
<7>[   25.761310] ieee80211 phy0: change: 0x40
<7>[   25.951289] ieee80211 phy1: change: 0x40
<7>[   25.991289] ieee80211 phy0: change: 0x40
<7>[   26.151288] ieee80211 phy1: change: 0x40
<7>[   26.211288] ieee80211 phy0: change: 0x40
<7>[   26.351289] ieee80211 phy1: change: 0x40
<7>[   26.431321] ieee80211 phy0: change: 0x60
<7>[   26.537389] ieee80211 phy0: change: 0x100
<7>[   26.546386] ieee80211 phy0: change: 0x100
<7>[   26.555537] ieee80211 phy0: change: 0x40
<7>[   26.561381] ieee80211 phy1: change: 0x40
<7>[   26.791303] ieee80211 phy1: change: 0x40
<7>[   26.801338] ieee80211 phy0: change: 0x40
<7>[   26.991293] ieee80211 phy1: change: 0x40
<7>[   27.021299] ieee80211 phy0: change: 0x40
<7>[   27.191295] ieee80211 phy1: change: 0x40
<7>[   27.241292] ieee80211 phy0: change: 0x40
<7>[   27.279318] ieee80211 phy1: change: 0x100
<7>[   27.288340] ieee80211 phy1: change: 0x100
<7>[   27.297430] ieee80211 phy1: change: 0x40
<7>[   27.461292] ieee80211 phy0: change: 0x40
<7>[   27.501295] ieee80211 phy1: change: 0x40
<7>[   27.681296] ieee80211 phy0: change: 0x40
<7>[   27.701297] ieee80211 phy1: change: 0x40
<7>[   27.891302] ieee80211 phy0: change: 0x40
<7>[   27.911294] ieee80211 phy1: change: 0x40
<7>[   28.101301] ieee80211 phy0: change: 0x40
<7>[   28.111316] ieee80211 phy1: change: 0x40
<7>[   28.311293] ieee80211 phy1: change: 0x40
<7>[   28.331291] ieee80211 phy0: change: 0x60
<7>[   28.511289] ieee80211 phy1: change: 0x40
<7>[   28.551289] ieee80211 phy0: change: 0x40
<7>[   28.721289] ieee80211 phy1: change: 0x40
<7>[   28.771298] ieee80211 phy0: change: 0x40
<7>[   28.921289] ieee80211 phy1: change: 0x40
<7>[   29.001293] ieee80211 phy0: change: 0x40
<7>[   29.131293] ieee80211 phy1: change: 0x40
<7>[   29.231288] ieee80211 phy0: change: 0x40
<7>[   29.331289] ieee80211 phy1: change: 0x40
<7>[   29.451296] ieee80211 phy0: change: 0x40
<7>[   29.531293] ieee80211 phy1: change: 0x40
<7>[   29.671292] ieee80211 phy0: change: 0x40
<7>[   29.731297] ieee80211 phy1: change: 0x40
<7>[   29.901288] ieee80211 phy0: change: 0x40
<7>[   29.931292] ieee80211 phy1: change: 0x40
<7>[   30.019319] ieee80211 phy1: change: 0x100
<7>[   30.082758] ieee80211 phy1: change: 0x100
<7>[   30.091295] ieee80211 phy1: change: 0x42
<7>[   30.121296] ieee80211 phy0: change: 0x40
<6>[   30.244344] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
<6>[   30.250795] br-lan: port 2(wlan1) entered blocking state
<6>[   30.256146] br-lan: port 2(wlan1) entered forwarding state
<7>[   30.341319] ieee80211 phy0: change: 0x40
<7>[   30.561298] ieee80211 phy0: change: 0x40
<7>[   30.781295] ieee80211 phy0: change: 0x60
<7>[   30.885313] ieee80211 phy0: change: 0x100
<7>[   30.894341] ieee80211 phy0: change: 0x100
<7>[   30.903413] ieee80211 phy0: change: 0x40
<7>[   31.121301] ieee80211 phy0: change: 0x40
<7>[   31.341291] ieee80211 phy0: change: 0x40
<7>[   31.561292] ieee80211 phy0: change: 0x40
<7>[   31.781291] ieee80211 phy0: change: 0x40
<7>[   32.001301] ieee80211 phy0: change: 0x40
<7>[   32.221294] ieee80211 phy0: change: 0x40
<7>[   32.441293] ieee80211 phy0: change: 0x40
<7>[   32.661293] ieee80211 phy0: change: 0x60
<7>[   32.881294] ieee80211 phy0: change: 0x40
<7>[   33.101293] ieee80211 phy0: change: 0x40
<7>[   33.321293] ieee80211 phy0: change: 0x40
<7>[   33.541293] ieee80211 phy0: change: 0x40
<7>[   33.761291] ieee80211 phy0: change: 0x40
<7>[   33.981291] ieee80211 phy0: change: 0x40
<7>[   34.201291] ieee80211 phy0: change: 0x40
<7>[   34.421291] ieee80211 phy0: change: 0x40
<7>[   34.641291] ieee80211 phy0: change: 0x40
<7>[   34.861291] ieee80211 phy0: change: 0x40
<7>[   35.081295] ieee80211 phy0: change: 0x60
<7>[   35.185310] ieee80211 phy0: change: 0x100
<7>[   35.194337] ieee80211 phy0: change: 0x100
<7>[   35.203457] ieee80211 phy0: change: 0x40
<7>[   35.421292] ieee80211 phy0: change: 0x40
<7>[   35.641295] ieee80211 phy0: change: 0x40
<7>[   35.745318] ieee80211 phy0: change: 0x100
<7>[   35.809156] ieee80211 phy0: change: 0x100
<7>[   35.818178] ieee80211 phy0: change: 0x42
<6>[   35.990319] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[   35.996762] br-lan: port 3(wlan0) entered blocking state
<6>[   36.002103] br-lan: port 3(wlan0) entered forwarding state
<6>[  121.174510] xt_conntrack: cannot load conntrack support for proto=10
<6>[  149.624016] xt_conntrack: cannot load conntrack support for proto=10
<6>[  317.781883] xt_conntrack: cannot load conntrack support for proto=10
<1>[70442.763618] Unable to handle kernel NULL pointer dereference at virtual address 0000000c
<1>[70442.771761] pgd = ddddc000
<1>[70442.774477] [0000000c] *pgd=1d23d831, *pte=00000000, *ppte=00000000
<0>[70442.780811] Internal error: Oops: 17 [#1] SMP ARM
<4>[70442.785532] Modules linked in: pppoe ppp_async pppox ppp_generic iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt mwlwifi mac80211 cfg80211 compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables gpio_button_hotplug
<4>[70442.838560] CPU: 1 PID: 1711 Comm: hostapd Not tainted 4.9.77 #0
<4>[70442.844589] Hardware name: Marvell Armada 380/385 (Device Tree)
<4>[70442.850532] task: dec6d300 task.stack: ddd78000
<4>[70442.855092] PC is at mwl_fwcmd_destroy_ba+0x98/0xf4 [mwlwifi]
<4>[70442.860867] LR is at mwl_fwcmd_destroy_ba+0x34/0xf4 [mwlwifi]
<4>[70442.866637] pc : [<bf0dc844>]    lr : [<bf0dc7e0>]    psr: 80000013
<4>[70442.866637] sp : ddd79c80  ip : 00000000  fp : 00000000
<4>[70442.878161] r10: ddde3620  r9 : de38cac0  r8 : de38cac0
<4>[70442.883406] r7 : ddde1620  r6 : ddde2924  r5 : 00000000  r4 : ddd8c000
<4>[70442.889959] r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : 00000000
<4>[70442.896513] Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
<4>[70442.903677] Control: 10c5387d  Table: 1dddc04a  DAC: 00000051
<0>[70442.909445] Process hostapd (pid: 1711, stack limit = 0xddd78210)
<0>[70442.915562] Stack: (0xddd79c80 to 0xddd7a000)
<0>[70442.919937] 9c80: 00000001 ddde1620 dd3c55d8 ddde45e0 ddde0be0 bf0dcbac dd3c55d8 ddde1620
<0>[70442.928150] 9ca0: ddde0be0 df6fbce0 de3d0300 de7d4800 00000014 bf0d7c68 dd3c5000 00000002
<0>[70442.936362] 9cc0: 00000001 dd14f414 de3d0300 de7d4800 00000014 bf06aca4 ddde0be0 df6fb4c0
<0>[70442.944574] 9ce0: dd3c5000 bf06d2e4 00000002 00000002 dd3c5000 ddde0be0 df6fb4c0 bf06e278
<0>[70442.952786] 9d00: dd3c5000 00000000 00000000 dd3c5000 dd14f420 bf06e3c4 df6fb4c0 00000454
<0>[70442.960999] 9d20: dd14f420 bf06e43c ddde0000 df6fb000 ddd79d68 bf03add8 dd14f420 0002000c
<0>[70442.969210] 9d40: ddd79d68 de3d0300 df57a000 bf0296e8 00000000 df57a1fc df57a000 c03d4560
<0>[70442.977423] 9d60: bf05653a 1f5b5000 5a7275f6 00000601 dd14f400 dd14f410 dde5ed80 de7d4800
<0>[70442.985635] 9d80: ddde0000 df6fb000 dd14f400 de3d0300 c03d42d8 ddc99c00 ddd79dcc 00000000
<0>[70442.993847] 9da0: 00000008 c03d38fc c0656b08 de3d0300 de3d0300 c03d42c4 df4ba400 00000028
<0>[70443.002059] 9dc0: de3d0300 c03d3300 ddc99c00 7fffffff 00000000 de3d0300 00000000 ddd79f68
<0>[70443.010270] 9de0: 00000028 ddc99c00 00000000 c03d376c 00000000 c0227e2c 00000028 df7dad00
<0>[70443.018482] 9e00: 00000000 000006af 00000000 00000000 00000001 ddd79f68 00000000 ddd79e8c
<0>[70443.026694] 9e20: df16a000 00000000 c0630fc8 00000000 00000000 c038e534 ddd79f68 c038eac4
<0>[70443.034906] 9e40: 00000000 00000000 00000000 009a0010 00000028 be8f2c1c 00000000 ddd79eb4
<0>[70443.043118] 9e60: df16a000 c038ecbc ddbd30c0 00000000 be8f2c74 009b4030 00004000 00000000
<0>[70443.051330] 9e80: ffffffff ffffffff 00000051 c0654d80 ddd79ecc 00000051 00008933 00000000
<0>[70443.059541] 9ea0: 00000000 be8f2cac 00000020 00000010 00000000 00000000 00000000 00000000
<0>[70443.067753] 9ec0: ffffffff 0000007f 00000000 6e616c77 dd636c80 60000013 df401080 dd636a00
<0>[70443.075965] 9ee0: 00000000 dd636a00 df22d0a0 c00f379c df22d10c 00000007 00000000 00000000
<0>[70443.084177] 9f00: dec6d300 c005af44 ddd79f08 ddd79f08 df401180 df22d080 df178000 00000000
<0>[70443.092390] 9f20: df401580 df178000 df178000 0004094d df22d0a0 df16a000 be8f2c90 00000000
<0>[70443.100601] 9f40: 00000128 c000ef04 ddd78000 00000000 b6f44740 c038f864 00000000 00000000
<0>[70443.108813] 9f60: 00000000 fffffff7 ddd79eac 0000000c 00000001 00000000 00000000 ddd79e54
<0>[70443.117025] 9f80: 00000000 00000006 00000000 00000000 00000000 00000000 00000000 00000000
<0>[70443.125236] 9fa0: b6fbe110 c000ed40 00000000 00000000 00000005 be8f2c90 00000000 00000000
<0>[70443.133449] 9fc0: 00000000 00000000 b6fbe110 00000128 b6f44ef0 00000000 000252b4 b6f44740
<0>[70443.141661] 9fe0: be8f2c38 be8f2c24 b6f95204 b6f946d0 60000010 00000005 ffffffff ffffffff
<4>[70443.149890] [<bf0dc844>] (mwl_fwcmd_destroy_ba [mwlwifi]) from [<bf0dcbac>] (mwl_fwcmd_del_sta_streams+0x98/0x330 [mwlwifi])
<4>[70443.161164] [<bf0dcbac>] (mwl_fwcmd_del_sta_streams [mwlwifi]) from [<bf0d7c68>] (mwl_mac80211_sta_remove+0x38/0x1ec [mwlwifi])
<4>[70443.172740] [<bf0d7c68>] (mwl_mac80211_sta_remove [mwlwifi]) from [<bf06aca4>] (drv_sta_state+0x16c/0x184 [mac80211])
<4>[70443.183433] [<bf06aca4>] (drv_sta_state [mac80211]) from [<bf06d2e4>] (sta_info_move_state+0xbc/0x1d0 [mac80211])
<4>[70443.193775] [<bf06d2e4>] (sta_info_move_state [mac80211]) from [<bf06e278>] (sta_set_sinfo+0x954/0xa80 [mac80211])
<4>[70443.204204] [<bf06e278>] (sta_set_sinfo [mac80211]) from [<bf06e3c4>] (__sta_info_destroy+0x20/0x28 [mac80211])
<4>[70443.214372] [<bf06e3c4>] (__sta_info_destroy [mac80211]) from [<bf06e43c>] (sta_info_destroy_addr_bss+0x2c/0x44 [mac80211])
<4>[70443.225588] [<bf06e43c>] (sta_info_destroy_addr_bss [mac80211]) from [<bf03add8>] (nl80211_del_station+0xe8/0xf0 [cfg80211])
<4>[70443.236868] [<bf03add8>] (nl80211_del_station [cfg80211]) from [<bf0296e8>] (extack_doit+0x2c/0x70 [compat])
<4>[70443.246741] [<bf0296e8>] (extack_doit [compat]) from [<c03d4560>] (genl_rcv_msg+0x288/0x310)
<4>[70443.255216] [<c03d4560>] (genl_rcv_msg) from [<c03d38fc>] (netlink_rcv_skb+0x58/0xb4)
<4>[70443.263080] [<c03d38fc>] (netlink_rcv_skb) from [<c03d42c4>] (genl_rcv+0x20/0x34)
<4>[70443.270593] [<c03d42c4>] (genl_rcv) from [<c03d3300>] (netlink_unicast+0x138/0x1fc)
<4>[70443.278283] [<c03d3300>] (netlink_unicast) from [<c03d376c>] (netlink_sendmsg+0x2f0/0x310)
<4>[70443.286586] [<c03d376c>] (netlink_sendmsg) from [<c038e534>] (sock_sendmsg+0x14/0x24)
<4>[70443.294451] [<c038e534>] (sock_sendmsg) from [<c038eac4>] (___sys_sendmsg+0x184/0x228)
<4>[70443.302403] [<c038eac4>] (___sys_sendmsg) from [<c038f864>] (__sys_sendmsg+0x40/0x64)
<4>[70443.310271] [<c038f864>] (__sys_sendmsg) from [<c000ed40>] (ret_fast_syscall+0x0/0x48)
<0>[70443.318223] Code: e5840010 e5d81004 e5c41014 e598c000 (e59c300c)
<4>[70443.324372] ---[ end trace bf36642614617548 ]---
09.03.20181418Base systemBug ReportVery LowCriticalDHCP not discovering certain devices on radio1 (2.4ghz ...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

  Linksys 3200ACM

- Software versions of OpenWrt/LEDE release, packages, etc.

   OpenWrt SNAPSHOT r6365-45fdb12 / LuCI Master (git-18.061.42275-852ec6e)
   Additional Packages:
   openssh-sftp-server    7.6p1-1
   nginx                  1.12.2-1

- Steps to reproduce

   Embedded platform such ESP8266, Wireless Cameras are unable to connect 
   to 2.4Ghz radio1 on 3200ACM with WPA2-CCMP.
   DHCP does not seem to discover these devices although radio1 (mwlwifi) successfully
   authenticates the devices.
  Clients: 4 x ESP8266 (SonOff Switches, FluxLED, etc.), Unbranded Wireless Camera
  1. DHCP Configuration
    config dnsmasq
        option domainneeded '1'
        option localise_queries '1'
        option rebind_protection '1'
        option rebind_localhost '1'
        option local '/lan/'
        option domain 'lan'
        option expandhosts '1'
        option authoritative '1'
        option readethers '1'
        option leasefile '/tmp/dhcp.leases'
        option resolvfile '/tmp/resolv.conf.auto'
        option nonwildcard '1'
        option localservice '1'

    config dhcp 'lan'
        option interface 'lan'
        option start '100'
        option limit '150'
        option leasetime '12h'
        list dhcp_option '6,8.8.8.8,8.8.4.4'

    config dhcp 'wan'
        option interface 'wan'
        option ignore '1'

    config odhcpd 'odhcpd'
        option maindhcp '0'
        option leasefile '/tmp/hosts/odhcpd'
        option leasetrigger '/usr/sbin/odhcpd-update'
        option loglevel '4'

    config host
        option name 'VelopNode1'
        option dns '1'
        option mac '58:ef:xx:xx:xx:xx'
        option ip '192.168.1.151'
        option leasetime 'infinite'

    config host
        option name 'Hikam-0505'
        option dns '1'
        option mac '88:83:5d:xx:xx:xx'
        option ip '192.168.1.200'
        option leasetime 'infinite'

    config host
        option name 'ESP_C0F513'
        option dns '1'
        option mac 'dc:4f:22:xx:xx:xx'
        option ip '192.168.1.235'
        option leasetime 'infinite'
  1. 2.4Ghz radio1 configuration:
    wireless.radio1=wifi-device
    wireless.radio1.type='mac80211'
    wireless.radio1.hwmode='11g'
    wireless.radio1.path='soc/soc:pcie/pci0000:00/0000:00:02.0/0000:02:00.0'
    wireless.radio1.country='US'
    wireless.radio1.channel='11'
    wireless.radio1.htmode='HT20'
    wireless.radio1.legacy_rates='1'
    wireless.radio1.txpower='30'
    root@openwrt:~# uci show wireless.default_radio1
    wireless.default_radio1=wifi-iface
    wireless.default_radio1.device='radio1'
    wireless.default_radio1.network='lan'
    wireless.default_radio1.ssid='SSID'
    wireless.default_radio1.key='PASSWORD'
    wireless.default_radio1.mode='ap'
    wireless.default_radio1.encryption='psk2'

- Logs:

    Sun Mar  4 04:07:41 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:07:41 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:07:50 2018 authpriv.info dropbear[3371]: Child connection from 192.168.1.151:57119
    Sun Mar  4 04:08:07 2018 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:08:07 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: disassociated
    Sun Mar  4 04:08:07 2018 kern.debug kernel: [  105.684705] ieee80211 phy1: staid 3 deleted
    Sun Mar  4 04:08:08 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
    Sun Mar  4 04:08:10 2018 kern.debug kernel: [  107.923936] ieee80211 phy1: staid 2 deleted
    Sun Mar  4 04:08:10 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 2)
    Sun Mar  4 04:08:10 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:08:10 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:08:13 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 3)
    Sun Mar  4 04:08:13 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:08:13 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:08:26 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:08:26 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:08:26 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:08:26 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:08:44 2018 kern.debug kernel: [  141.932637] ieee80211 phy1: staid 2 deleted
    Sun Mar  4 04:08:44 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 2)
    Sun Mar  4 04:08:44 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:08:44 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:08:44 2018 kern.debug kernel: [  142.629431] ieee80211 phy1: staid 3 deleted
    Sun Mar  4 04:08:48 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 3)
    Sun Mar  4 04:08:48 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:08:48 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:09:22 2018 kern.debug kernel: [  180.723186] ieee80211 phy1: staid 3 deleted
    Sun Mar  4 04:09:22 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 3)
    Sun Mar  4 04:09:23 2018 kern.debug kernel: [  181.044324] ieee80211 phy1: staid 2 deleted
    Sun Mar  4 04:09:23 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 2)
    Sun Mar  4 04:09:23 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:09:23 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:09:26 2018 kern.debug kernel: [  184.838938] ieee80211 phy1: staid 3 deleted
    Sun Mar  4 04:09:26 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 3)
    Sun Mar  4 04:09:28 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:09:28 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:09:34 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:09:34 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:09:34 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:09:34 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:09:34 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:09:34 2018 kern.debug kernel: [  191.989466] ieee80211 phy1: staid 3 deleted
    Sun Mar  4 04:09:34 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: authenticated
    Sun Mar  4 04:10:06 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 3)
    Sun Mar  4 04:10:06 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:10:06 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Sun Mar  4 04:10:07 2018 kern.debug kernel: [  225.251038] ieee80211 phy1: staid 2 deleted
    Sun Mar  4 04:10:07 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx IEEE 802.11: associated (aid 2)
    Sun Mar  4 04:10:07 2018 daemon.notice hostapd: wlan1: AP-STA-CONNECTED dc:4f:22:xx:xx:xx
    Sun Mar  4 04:10:07 2018 daemon.info hostapd: wlan1: STA dc:4f:22:xx:xx:xx WPA: pairwise key handshake completed (RSN)

Note: These clients are able to join my alternative access point (Velop Nodes) on same frequency and encryption. They are also

  able to join on factory image(FW_WRT3200ACM_1.0.6.186168_prod) radio1 access point and as well as radio2 in openwrt stipulated build.

More info: https://github.com/kaloz/mwlwifi/issues/278

02.04.20181467KernelBug ReportVery LowCriticalieee80211_tx_status: headroom too smallTrunkUnconfirmed Task Description

Latest LEDE on Gateworks Newport GW6300 (octeontx) with Compex WLE900VX ath10k radio. Using 4.14.13 mainline OpenWrt kernel

The syslog is getting spammed with “headroom too small” errors when a monitor wireless interface exists and a station gets connected:

Thu Jan  1 00:52:00 1970 kern.err kernel: [  157.740108] ieee80211_tx_status: headroom too small
Thu Jan  1 00:52:01 1970 kern.err kernel: [  158.764099] ieee80211_tx_status: headroom too small
Thu Jan  1 00:52:02 1970 kern.err kernel: [  159.788129] ieee80211_tx_status: headroom too small

These errors are shown using ath10k and ath10k-ct driver versions (currently using ath10k-ct)

Steps to reproduce:

  1. Create a new monitor wireless interface
    iw phy phy0 interface add mon0 type monitor
    ip l set dev mon0 up
  2. Connect a client to the access point configured radio

Full logread info attached separately

16.05.20181550Base systemBug ReportVery LowCriticalUnable to handle kernel paging request causes router to...TrunkUnconfirmed Task Description

- Device problem occurs on
Xiaomi mi router 3G (R3G)

- Software versions of OpenWrt/LEDE release, packages, etc.
Latest trunk (r6893-bfbdeeb) custom build

- Steps to reproduce
Did not notice there is a pattern here.

- The issue
The kernel crash causes the router to reboot. Here are two traces I was able to catch

May 13 07:24:52 router kernel: [82948.434471] CPU 1 Unable to handle kernel paging request at virtual address 07407800, epc == 80136a70, ra == 8013694c
May 13 07:24:52 router kernel: [82948.445103] Oops[#1]:
May 13 07:24:52 router kernel: [82948.447387] CPU: 1 PID: 1977 Comm: kworker/u8:1 Not tainted 4.14.37 #0
May 13 07:24:52 router kernel: [82948.453909] Workqueue: writeback wb_workfn (flush-8:0)
May 13 07:24:52 router kernel: [82948.459046] task: 8ff3ddc0 task.stack: 8dd62000
May 13 07:24:52 router kernel: [82948.463565] $ 0 : 00000000 00000001 00000000 812286b0
May 13 07:24:52 router kernel: [82948.468800] $ 4 : 805aa44c 00000001 00000001 07407800
May 13 07:24:52 router kernel: [82948.474019] $ 8 : 000facb3 000facb2 00000002 00064000
May 13 07:24:52 router kernel: [82948.479248] $12 : 00000009 0004001a fffeffff 00001000
May 13 07:24:52 router kernel: [82948.484473] $16 : 8fc02c00 000001b8 01011200 8022b6f0
May 13 07:24:52 router kernel: [82948.489695] $20 : 8ebb0000 8006a664 8e56d81c 01400000
May 13 07:24:52 router kernel: [82948.494913] $24 : 81196320 00000000
May 13 07:24:52 router kernel: [82948.500133] $28 : 8dd62000 8dd63950 8fd77d40 8013694c
May 13 07:24:52 router kernel: [82948.505351] Hi : 00000000
May 13 07:24:52 router kernel: [82948.508214] Lo : 00840480
May 13 07:24:52 router kernel: [82948.511113] epc : 80136a70 kmalloc+0x1f8/0x2ec
May 13 07:24:52 router kernel: [82948.515887] ra : 8013694c
kmalloc+0xd4/0x2ec
May 13 07:24:52 router kernel: [82948.520568] Status: 11007c03#011KERNEL EXL IE May 13 07:24:52 router kernel: [82948.524750] Cause : 40800008 (ExcCode 02)
May 13 07:24:52 router kernel: [82948.528740] BadVA : 07407800
May 13 07:24:52 router kernel: [82948.531605] PrId : 0001992f (MIPS 1004Kc)
May 13 07:24:52 router kernel: [82948.535679] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 cdc_ether xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack libcrc32c iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport
May 13 07:24:52 router kernel: [82948.606444] ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables vfat fat nls_utf8 nls_iso8859_1 nls_cp437 usb_storage leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii crc32c_generic
May 13 07:24:52 router kernel: [82948.655996] Process kworker/u8:1 (pid: 1977, threadinfo=8dd62000, task=8ff3ddc0, tls=00000000)
May 13 07:24:52 router kernel: [82948.664578] Stack : 01011200 00400000 8006a664 8f0c719c 00000001 00000000 8fd33300 01011200
May 13 07:24:52 router kernel: [82948.672925] 8fe74850 01011200 00000001 00400000 8006a664 8022b6f0 8fe74850 01011200
May 13 07:24:52 router kernel: [82948.681267] 01411200 8fdf9e00 01011200 01411200 8e56d800 800ecd30 8fe74850 01011200
May 13 07:24:52 router kernel: [82948.689609] 01411200 8fdf9d00 01400000 00400000 8006a664 800ecd30 00060000 00000001
May 13 07:24:52 router kernel: [82948.697952] 8dd63a48 8fe74850 00000000 8fe74850 00000001 8fe74850 00000000 8fe74878
May 13 07:24:52 router kernel: [82948.706292] ...
May 13 07:24:52 router kernel: [82948.708733] Call Trace:
May 13 07:24:52 router kernel: [82948.711201] [<80136a70>] __kmalloc+0x1f8/0x2ec
May 13 07:24:52 router kernel: [82948.715643] [<8022b6f0>] alloc_request_size+0x2c/0x7c
May 13 07:24:52 router kernel: [82948.720708] [<800ecd30>] mempool_alloc+0x6c/0×178 May 13 07:24:52 router kernel: [82948.725402] [<8022cf88>] get_request+0×360/0x76c
May 13 07:24:52 router kernel: [82948.730005] [<802303c4>] blk_queue_bio+0x1cc/0×430 May 13 07:24:52 router kernel: [82948.734781] [<8022e3cc>] generic_make_request+0xd8/0×288 May 13 07:24:52 router kernel: [82948.740078] [<8022e6a0>] submit_bio+0×124/0×164 May 13 07:24:52 router kernel: [82948.744663] [<8f1c3014>] ext4_io_submit+0×50/0×64 [ext4]
May 13 07:24:52 router kernel: [82948.749989] [<8f1a5994>] ext4_mark_inode_dirty+0xeac/0×1368 [ext4]
May 13 07:24:52 router kernel: [82948.756166] Code: 32428000 8e020014 00e23821 <8ce20000> 1000002c cc400000 1280ffbc 00000000 8e060010
May 13 07:24:52 router kernel: [82948.765910]
May 13 07:24:52 router kernel: [82948.767638] —[ end trace e8f9893fb33e6a26 ]—

and the second case

May 15 15:52:16 router kernel: [67618.480256] CPU 0 Unable to handle kernel paging request at virtual address 07402800, epc == 80136784, ra == 800ecd30
May 15 15:52:16 router kernel: [67618.490997] Oops[#1]:
May 15 15:52:16 router kernel: [67618.493275] CPU: 0 PID: 14159 Comm: kworker/u8:1 Not tainted 4.14.37 #0
May 15 15:52:16 router kernel: [67618.499875] Workqueue: writeback wb_workfn (flush-8:0)
May 15 15:52:16 router kernel: [67618.504997] task: 8c3276c0 task.stack: 8b656000
May 15 15:52:16 router kernel: [67618.509500] $ 0 : 00000000 00000001 00000000 8121a6c0
May 15 15:52:16 router kernel: [67618.514709] $ 4 : 805aa44c 00000001 00000001 07402800
May 15 15:52:16 router kernel: [67618.519918] $ 8 : 00005ddf 00005dde 8fb9b6a0 00000120
May 15 15:52:16 router kernel: [67618.525127] $12 : 8000001f 00000010 00000124 00000001
May 15 15:52:16 router kernel: [67618.530336] $16 : 8fd4a200 01011200 800ecd30 8b0e0000
May 15 15:52:16 router kernel: [67618.535545] $20 : 00400000 8006a664 8fd4981c 80660000
May 15 15:52:16 router kernel: [67618.540754] $24 : ffffffe0 ffff0000
May 15 15:52:16 router kernel: [67618.545963] $28 : 8b656000 8b657970 8f1c2c24 800ecd30
May 15 15:52:16 router kernel: [67618.551174] Hi : 00000000
May 15 15:52:16 router kernel: [67618.554035] Lo : 008402f0
May 15 15:52:16 router kernel: [67618.556924] epc : 80136784 kmem_cache_alloc+0x13c/0×230 May 15 15:52:16 router kernel: [67618.562323] ra : 800ecd30 mempool_alloc+0x6c/0×178 May 15 15:52:16 router kernel: [67618.567345] Status: 11008403#011KERNEL EXL IE May 15 15:52:16 router kernel: [67618.571515] Cause : 40800008 (ExcCode 02)
May 15 15:52:16 router kernel: [67618.575499] BadVA : 07402800
May 15 15:52:16 router kernel: [67618.578361] PrId : 0001992f (MIPS 1004Kc)
May 15 15:52:16 router kernel: [67618.582431] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 cdc_ether xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack libcrc32c iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport
May 15 15:52:16 router kernel: [67618.653177] ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables vfat fat nls_utf8 nls_iso8859_1 nls_cp437 usb_storage leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii crc32c_generic
May 15 15:52:16 router kernel: [67618.702675] Process kworker/u8:1 (pid: 14159, threadinfo=8b656000, task=8c3276c0, tls=00000000)
May 15 15:52:16 router kernel: [67618.711326] Stack : 8e648b20 8f147e00 8e648b20 01011200 00000001 8022b710 00000002 01011200
May 15 15:52:16 router kernel: [67618.719658] 01411200 8fd49800 01400000 00400000 8006a664 800ecd30 00000001 01011200
May 15 15:52:16 router kernel: [67618.727990] 01411200 8fd49700 01400000 00400000 8006a664 800ecd30 8e330030 8c499000
May 15 15:52:16 router kernel: [67618.736322] 8fd9f000 8b657a2c 01400000 8fd49800 01400000 01400000 8e47fa00 8d44d8f8
May 15 15:52:16 router kernel: [67618.744655] 80660000 80225974 8fd49600 00000100 01400000 8d48d7c0 8e47fa00 8fd49600
May 15 15:52:16 router kernel: [67618.752989] ...
May 15 15:52:16 router kernel: [67618.755425] Call Trace:
May 15 15:52:16 router kernel: [67618.757859] [<80136784>] kmem_cache_alloc+0x13c/0×230 May 15 15:52:16 router kernel: [67618.762897] [<800ecd30>] mempool_alloc+0x6c/0×178 May 15 15:52:16 router kernel: [67618.767596] [<80225974>] bvec_alloc+0xdc/0×154 May 15 15:52:16 router kernel: [67618.772020] [<80225b44>] bio_alloc_bioset+0×158/0×250 May 15 15:52:16 router kernel: [67618.777111] [<8f1c3358>] ext4_bio_write_page+0×320/0x5c4 [ext4]
May 15 15:52:16 router kernel: [67618.783028] [<8f19e3f4>] ext4_convert_inline_data+0×874/0x21a8 [ext4]
May 15 15:52:16 router kernel: [67618.789461] [<8f19e860>] ext4_convert_inline_data+0xce0/0x21a8 [ext4]
May 15 15:52:16 router kernel: [67618.795881] Code: 32228000 8e020014 00e23821 <8ce20000> 1000002d cc400000 1260ffbc 00000000 8e060010
May 15 15:52:16 router kernel: [67618.805607]
May 15 15:52:16 router kernel: [67618.807332] —[ end trace 3b32ff5399a1bc64 ]—


11.06.20181586Base systemBug ReportVery LowCriticalDAP-1522 A1 factory to snapshot kernel panic and system...TrunkUnconfirmed Task Description

DAP-1522 A1 stock firmware 1.21 or 1.42 , device page https://openwrt.org/toh/hwdata/d-link/d-link_dap-1522_a1 Flash via GUI or Recovery interface , both the same result/fail.
Since this device is not supported on 17.04.1 https://downloads.lede-project.org/releases/17.01.4/targets/ramips/rt288x/
I try the snapshot from https://downloads.openwrt.org/snapshots/targets/ramips/rt288x/openwrt-ramips-rt288x-dlink_dap-1522-a1-squashfs-factory.bin Checksum ok

Here is the boot log

U-Boot 1.1.3 (Aug 28 2009 - 15:47:01) Build 001--ALPHA_v011

Board: RT2880 DRAM:  32 MB
        twe0 set to <NULL>
        toe0 set to <NULL>
============================================
ASIC -VerB/C (MAC to MAC Mode)
DRAM COMPONENT=256Mbits
DRAM BUS=16BIT
Total memory = 32Mbytes
Date:Aug 28 2009  Time:15:47:01
============================================

Eth0 (10/100-M)



Hit any key to stop autoboot:  0
## Booting image at bc440000 ...
   Image Name:   7zip Linux Kernel
   Created:      1970-01-01   0:00:00 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    -1 Bytes = 4096 MB
   Load Address: 8a000000
   Entry Point:  8a000000
   Uncompressing Kernel Image with LZMA ...
OK

Starting kernel ...

[    0.000000] Linux version 4.14.48 (buildbot@slashdirt-02) (gcc version 7.3.0                                                                 (OpenWrt GCC 7.3.0
r7172-f60301d)) #0 Sat Jun 9 20:39:17 2018
[    0.000000] SoC Type: Ralink RT2880 id:2 rev:0
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001906c (MIPS 4KEc)
[    0.000000] MIPS: machine is D-Link DAP-1522 A1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 08000000 (usable)
[    0.000000] Wasting 1048576 bytes for tracking 32768 unused pages
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 byt                                                                es
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000009ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000009ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000009ffffff]
[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x47c with                                                                 crng_init=0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 40640
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs                                                                2
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 25248K/163840K available (3518K kernel code, 174K rwdata,                                                                 844K rodata, 1216K
init, 214K bss, 138592K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 256
[    0.000000] Failed to request intc memory
[    0.000000] Kernel panic - not syncing: Failed to request resources for ralin                                                                k,rt2880-sysc
[    0.000000] Rebooting in 1 seconds..
[    0.000000] Reboot failed -- System halted

Regards,


31.07.20181719Base systemBug ReportVery LowCriticalNo wireless interfaces on the UniFi AP AC Lite on the f...openwrt-18.06Unconfirmed Task Description

The same issue as this, but on the final release: https://bugs.openwrt.org/index.php?do=details&task_id=1663&string=unifi&type%5B0%5D=&sev%5B0%5D=&pri%5B0%5D=&due%5B0%5D=&reported%5B0%5D=&cat%5B0%5D=&status%5B0%5D=open&percent%5B0%5D=&opened=&dev=&closed=&duedatefrom=&duedateto=&changedfrom=&changedto=&openedfrom=&openedto=&closedfrom=&closedto=

03.08.20181726Base systemBug ReportVery LowCriticalNetifd lockup when USB LTE modem was restartedopenwrt-18.06Unconfirmed Task Description

OpenWrt 18.06.0, r7188-b0b5c64c22
Device: Xiaomi Mir3G
Modem: Huawei E3372

How to reproduce:
1. Bring up wwan interface
2. Reconnect modem (or echo ‘at^reset’ > /dev/ttyUSB0)
3. See in logs:

Fri Aug  3 16:59:02 2018 kern.info kernel: [  950.710901] usb 1-1: USB disconnect, device number 3
Fri Aug  3 16:59:02 2018 kern.info kernel: [  950.716646] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Fri Aug  3 16:59:02 2018 kern.info kernel: [  950.725206] option 1-1:1.0: device disconnected
Fri Aug  3 16:59:02 2018 kern.info kernel: [  950.730738] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Fri Aug  3 16:59:02 2018 kern.info kernel: [  950.739145] option 1-1:1.1: device disconnected
Fri Aug  3 16:59:02 2018 kern.info kernel: [  950.744808] huawei_cdc_ncm 1-1:1.2 wwan0: unregister 'huawei_cdc_ncm' usb-1e1c0000.xhci-1, Huawei CDC NCM device
Fri Aug  3 16:59:02 2018 daemon.notice netifd: Network device 'wwan0' link is down
Fri Aug  3 16:59:02 2018 daemon.notice netifd: Network alias 'wwan0' link is down
Fri Aug  3 16:59:02 2018 daemon.notice netifd: Interface 'wwan_4' has link connectivity loss
Fri Aug  3 16:59:02 2018 daemon.notice netifd: Interface 'wwan_4' is disabled
Fri Aug  3 16:59:02 2018 daemon.info chronyd[1303]: Source 94.247.111.10 offline
Fri Aug  3 16:59:02 2018 daemon.info chronyd[1303]: Source 195.91.239.8 offline
Fri Aug  3 16:59:02 2018 daemon.info chronyd[1303]: Source 91.207.136.50 offline
Fri Aug  3 16:59:02 2018 daemon.info chronyd[1303]: Source 195.210.189.106 offline
Fri Aug  3 16:59:02 2018 daemon.info chronyd[1303]: Can't synchronise: no selectable sources
Fri Aug  3 16:59:02 2018 daemon.notice netifd: wwan_4 (4421): udhcpc: SIOCGIFINDEX: No such device
Fri Aug  3 16:59:02 2018 daemon.notice netifd: wwan_4 (4421): udhcpc: received SIGTERM
Fri Aug  3 16:59:03 2018 daemon.notice netifd: wwan (4800): Stopping network wwan
Fri Aug  3 16:59:03 2018 daemon.notice netifd: wwan (4800): Can't open device /dev/ttyUSB1.
Fri Aug  3 16:59:03 2018 daemon.notice netifd: wwan (4800): Failed to disconnect
Fri Aug  3 16:59:03 2018 daemon.notice netifd: Interface 'wwan' is now down
Fri Aug  3 16:59:03 2018 daemon.warn dnsmasq[4567]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Aug  3 16:59:09 2018 kern.info kernel: [  957.683961] usb 1-1: new high-speed USB device number 4 using xhci-mtk
Fri Aug  3 16:59:09 2018 kern.info kernel: [  957.867590] option 1-1:1.0: GSM modem (1-port) converter detected
Fri Aug  3 16:59:09 2018 kern.info kernel: [  957.874380] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Fri Aug  3 16:59:09 2018 kern.info kernel: [  957.882334] option 1-1:1.1: GSM modem (1-port) converter detected
Fri Aug  3 16:59:09 2018 kern.info kernel: [  957.889115] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Fri Aug  3 16:59:09 2018 kern.info kernel: [  957.915707] huawei_cdc_ncm 1-1:1.2: resetting NTB format to 16-bit
Fri Aug  3 16:59:09 2018 kern.info kernel: [  957.926799] huawei_cdc_ncm 1-1:1.2: MAC-Address: 00:1e:10:1f:00:00
Fri Aug  3 16:59:09 2018 kern.info kernel: [  957.933038] huawei_cdc_ncm 1-1:1.2: setting rx_max = 16384
Fri Aug  3 16:59:09 2018 kern.info kernel: [  957.938957] huawei_cdc_ncm 1-1:1.2: NDP will be placed at end of frame for this device.
Fri Aug  3 16:59:09 2018 kern.info kernel: [  957.947454] huawei_cdc_ncm 1-1:1.2: cdc-wdm0: USB WDM device
Fri Aug  3 16:59:09 2018 kern.info kernel: [  957.955970] huawei_cdc_ncm 1-1:1.2 wwan0: register 'huawei_cdc_ncm' at usb-1e1c0000.xhci-1, Huawei CDC NCM device, 00:1e:10:1f:00:00
Fri Aug  3 16:59:10 2018 daemon.notice netifd: Interface 'wwan' is setting up now
Fri Aug  3 16:59:10 2018 daemon.notice netifd: wwan (5197): Stopping network wwan
Fri Aug  3 16:59:11 2018 daemon.notice netifd: wwan (5197): sending ->
Fri Aug  3 16:59:15 2018 daemon.notice netifd: Interface 'wwan' is now down

Now ``ifup wwan`` or ``ifdown wwan`` doesn’t do anything until restart of netifd process.

10.08.20181759Base systemBug ReportVery LowCritical SQM fine in 17.01.4, can’t keep up with line speed in ...openwrt-18.06Unconfirmed Task Description

Netgear R7800 running 17.01.4 kept up with my ISP line speed (nominal 250Mbps/15Mbps) when configured to use SQM with cake/piece_of_cake.
In 18.06, it cannot keep up
Possibly the same root cause as issue 1598

DSLreports speed test with SQM enabled in 17.01.4 (223.1/14.71 Mbps):
http://www.dslreports.com/speedtest/29614883

and with 18.06 ( 95.8/14.16 Mbps):
http://www.dslreports.com/speedtest/36981183

root@LEDE:~# cat /etc/config/sqm

config queue 'eth1'
	option qdisc_advanced '0'
	option verbosity '5'
	option upload '15000'
	option linklayer 'ethernet'
	option overhead '18'
	option debug_logging '1'
	option download '232750'
	option interface 'eth0.2'
	option enabled '1'
	option qdisc 'cake'
	option script 'piece_of_cake.qos'

Sample tc output after running the DSLreports speed test

root@LEDE:~# tc -d qdisc
qdisc noqueue 0: dev lo root refcnt 2 
qdisc mq 0: dev eth0 root 
qdisc fq_codel 0: dev eth0 parent :1 limit 10240p flows 1024 quantum 1514 target 5.0ms interval 100.0ms memory_limit 4Mb ecn 
qdisc mq 0: dev eth1 root 
qdisc fq_codel 0: dev eth1 parent :1 limit 10240p flows 1024 quantum 1514 target 5.0ms interval 100.0ms memory_limit 4Mb ecn 
qdisc noqueue 0: dev br-lan root refcnt 2 
qdisc noqueue 0: dev eth1.1 root refcnt 2 
qdisc cake 8012: dev eth0.2 root refcnt 2 bandwidth 15Mbit besteffort triple-isolate split-gso rtt 100.0ms noatm overhead 18 
qdisc ingress ffff: dev eth0.2 parent ffff:fff1 ---------------- 
qdisc noqueue 0: dev br-guest root refcnt 2 
qdisc noqueue 0: dev br-iot root refcnt 2 
qdisc noqueue 0: dev wlan0 root refcnt 2 
qdisc noqueue 0: dev wlan1 root refcnt 2 
qdisc noqueue 0: dev wlan1-1 root refcnt 2 
qdisc noqueue 0: dev wlan1-2 root refcnt 2 
qdisc noqueue 0: dev wlan0-1 root refcnt 2 
qdisc fq_codel 0: dev ovpns0 root refcnt 2 limit 10240p flows 1024 quantum 1500 target 5.0ms interval 100.0ms memory_limit 4Mb ecn 
qdisc fq_codel 0: dev ovpns1 root refcnt 2 limit 10240p flows 1024 quantum 1500 target 5.0ms interval 100.0ms memory_limit 4Mb ecn 
qdisc cake 8013: dev ifb4eth0.2 root refcnt 2 bandwidth 232750Kbit besteffort triple-isolate wash split-gso rtt 100.0ms noatm overhead 18 

root@LEDE:~# tc -s qdisc
qdisc noqueue 0: dev lo root refcnt 2 
 Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
qdisc mq 0: dev eth0 root 
 Sent 351709498 bytes 2034499 pkt (dropped 0, overlimits 0 requeues 65185) 
 backlog 0b 0p requeues 65185
qdisc fq_codel 0: dev eth0 parent :1 limit 10240p flows 1024 quantum 1514 target 5.0ms interval 100.0ms memory_limit 4Mb ecn 
 Sent 351709498 bytes 2034499 pkt (dropped 0, overlimits 0 requeues 65185) 
 backlog 0b 0p requeues 65185
  maxpacket 1514 drop_overlimit 0 new_flow_count 60774 ecn_mark 0
  new_flows_len 0 old_flows_len 0
qdisc mq 0: dev eth1 root 
 Sent 4385184093 bytes 3164614 pkt (dropped 0, overlimits 0 requeues 109126) 
 backlog 0b 0p requeues 109126
qdisc fq_codel 0: dev eth1 parent :1 limit 10240p flows 1024 quantum 1514 target 5.0ms interval 100.0ms memory_limit 4Mb ecn 
 Sent 4385184093 bytes 3164614 pkt (dropped 0, overlimits 0 requeues 109126) 
 backlog 0b 0p requeues 109126
  maxpacket 1514 drop_overlimit 0 new_flow_count 137321 ecn_mark 0
  new_flows_len 0 old_flows_len 0
qdisc noqueue 0: dev br-lan root refcnt 2 
 Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
qdisc noqueue 0: dev eth1.1 root refcnt 2 
 Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
qdisc cake 8012: dev eth0.2 root refcnt 2 bandwidth 15Mbit besteffort triple-isolate split-gso rtt 100.0ms noatm overhead 18 
 Sent 41321462 bytes 92960 pkt (dropped 919, overlimits 39456 requeues 0) 
 backlog 0b 0p requeues 0
 memory used: 194432b of 4Mb
 capacity estimate: 15Mbit
 min/max network layer size:           28 /    1500
 min/max overhead-adjusted size:       46 /    1518
 average network hdr offset:           14

                  Tin 0
  thresh         15Mbit
  target          5.0ms
  interval      100.0ms
  pk_delay        672us
  av_delay        211us
  sp_delay         11us
  backlog            0b
  pkts            93879
  bytes        42712828
  way_inds            6
  way_miss          392
  way_cols            0
  drops             919
  marks               0
  ack_drop            0
  sp_flows            0
  bk_flows            1
  un_flows            0
  max_len         12112
  quantum           457

qdisc ingress ffff: dev eth0.2 parent ffff:fff1 ---------------- 
 Sent 143870988 bytes 121001 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
qdisc noqueue 0: dev br-guest root refcnt 2 
 Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
qdisc noqueue 0: dev br-iot root refcnt 2 
 Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
qdisc noqueue 0: dev wlan0 root refcnt 2 
 Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
qdisc noqueue 0: dev wlan1 root refcnt 2 
 Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
qdisc noqueue 0: dev wlan1-1 root refcnt 2 
 Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
qdisc noqueue 0: dev wlan1-2 root refcnt 2 
 Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
qdisc noqueue 0: dev wlan0-1 root refcnt 2 
 Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
qdisc fq_codel 0: dev ovpns0 root refcnt 2 limit 10240p flows 1024 quantum 1500 target 5.0ms interval 100.0ms memory_limit 4Mb ecn 
 Sent 2015423 bytes 2972 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
  maxpacket 0 drop_overlimit 0 new_flow_count 0 ecn_mark 0
  new_flows_len 0 old_flows_len 0
qdisc fq_codel 0: dev ovpns1 root refcnt 2 limit 10240p flows 1024 quantum 1500 target 5.0ms interval 100.0ms memory_limit 4Mb ecn 
 Sent 228 bytes 3 pkt (dropped 0, overlimits 0 requeues 0) 
 backlog 0b 0p requeues 0
  maxpacket 0 drop_overlimit 0 new_flow_count 0 ecn_mark 0
  new_flows_len 0 old_flows_len 0
qdisc cake 8013: dev ifb4eth0.2 root refcnt 2 bandwidth 232750Kbit besteffort triple-isolate wash split-gso rtt 100.0ms noatm overhead 18 
 Sent 148570176 bytes 120706 pkt (dropped 297, overlimits 622 requeues 0) 
 backlog 0b 0p requeues 0
 memory used: 661056b of 11637500b
 capacity estimate: 232750Kbit
 min/max network layer size:           46 /    1500
 min/max overhead-adjusted size:       64 /    1518
 average network hdr offset:           14

                  Tin 0
  thresh     232750Kbit
  target          5.0ms
  interval      100.0ms
  pk_delay        245us
  av_delay         45us
  sp_delay          4us
  backlog            0b
  pkts           121003
  bytes       149019834
  way_inds            6
  way_miss          384
  way_cols            0
  drops             297
  marks               0
  ack_drop            0
  sp_flows            0
  bk_flows            1
  un_flows            0
  max_len         12112
  quantum          1514
30.08.20181824Base systemBug ReportVery LowCriticalCisco / Meraki MR24 locks up after a day or so using 18...openwrt-18.06Unconfirmed Task Description

Upgrade an MR24 from LEDE 17.01.5 to 18.06.1, and wait a day. Device locks up. WIFI is still advertised, but lan port is no longer pingable.

 


30.09.20181872Base systemBug ReportVery LowCriticalArcher C2600 v1.0 tftp recovery is brokenopenwrt-18.06Unconfirmed Task Description

After i have flashed Openwrt 18.06.1 on my Archer c2600 the tftp recovery dont work anymore. I updated the Openwrt factory image over the web interface. Now i have tried to flash back the original firmware over tftp but it dont work. Im able to start the recovery, and the image is transferred over tftp from my pc, but the router just reboots and load Openwrt again. If i try to flash the Openwrt factory image it also dont work this way anymore. This is a big problem, because somebody would have trouble with the system, he would not be able to recover the router. Also because its not very easy to connect the serial port from the router.


03.10.20181878KernelBug ReportVery LowCriticalFsck privately repaired the file system ext4 on my hdd...openwrt-18.06Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on x86-64
- Software versions of OpenWrt/LEDE release, packages, etc.openwrt18.06 55bbd8
- Steps to reproduce.booting and the log showed:

[ 21.237803] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 21.272692] EXT4-fs (sda9): Errors on filesystem, clearing orphan list.
[ 21.272692]
[ 21.281161] EXT4-fs (sda9): recovery complete
[ 21.317228] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 22.061620] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 22.069917] br-lan: port 1(eth0) entered blocking state
[ 22.075803] br-lan: port 1(eth0) entered forwarding state
[ 22.081750] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 23.607322] EXT4-fs (sda10): 3 orphan inodes deleted
[ 23.612459] EXT4-fs (sda10): recovery complete
[ 23.708324] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 26.560650] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 27.547143] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 27.567936] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 27.674344] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 30.029453] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 30.949532] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 30.969532] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 31.076454] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 33.381486] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 34.252398] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 34.272320] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 34.386849] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 36.883663] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 37.787051] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 37.808077] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 37.914149] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 40.179819] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 41.121988] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 41.143438] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 41.249342] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 45.605695] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 46.626671] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 46.646619] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 46.761479] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 49.141156] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 50.029110] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 50.057517] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 50.171446] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 52.634916] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 53.630485] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 53.651385] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 53.765666] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 56.181064] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 57.106498] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 57.127788] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 57.226070] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 59.531087] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 60.476052] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 60.496576] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 60.602792] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 62.968986] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 63.853172] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 63.873463] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 63.980377] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 66.434813] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 67.379340] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 67.425858] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 67.541354] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 69.678280] F2FS-fs (sdb3): Magic Mismatch, valid(0xf2f52010) - read(0×0)
[ 69.685327] F2FS-fs (sdb3): Can’t find valid F2FS filesystem in 1th superblock
[ 69.693925] F2FS-fs (sdb3): Magic Mismatch, valid(0xf2f52010) - read(0×0)
[ 69.700936] F2FS-fs (sdb3): Can’t find valid F2FS filesystem in 2th superblock
[ 69.708463] F2FS-fs (sdb3): Magic Mismatch, valid(0xf2f52010) - read(0×0)
[ 69.715499] F2FS-fs (sdb3): Can’t find valid F2FS filesystem in 1th superblock
[ 69.723034] F2FS-fs (sdb3): Magic Mismatch, valid(0xf2f52010) - read(0×0)
[ 69.730039] F2FS-fs (sdb3): Can’t find valid F2FS filesystem in 2th superblock
[ 69.978884] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 71.390695] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 71.410966] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 71.517413] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 73.339283] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 74.259796] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 74.279939] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 74.377566] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 76.068444] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 76.960511] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 76.981847] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 77.079687] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 78.675960] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 79.687038] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 79.708336] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 79.806743] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 81.486004] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 82.438683] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 82.460115] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 82.574661] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 84.356267] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 85.274004] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 85.295104] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 85.409756] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 87.105830] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 88.151523] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 88.173126] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 88.269852] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 90.191325] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 91.112146] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 91.132150] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 91.238595] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 93.101835] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 94.013109] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 94.033603] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 94.131548] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 95.877771] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 96.848488] EXT4-fs (sda9): warning: mounting fs with errors, running e2fsck is recommended
[ 96.869262] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 96.975183] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)

then i booted my linuxmint,displayed file system error needs to be fixed


07.11.20181938Base systemBug ReportVery LowCriticalCONFIG_PKG_ASLR_PIE and CONFIG_USE_MKLIBS are incompati...TrunkUnconfirmed Task Description

I’m building OpenWrt trunk (commit dceee8cc09a54f96dee82a6e95e3e77a6dd7ac13) for Netgear R7800 (though I think, device doesn’t matter here).

It turns out that if both CONFIG_PKG_ASLR_PIE and CONFIG_USE_MKLIBS are turned on, the system renders unusable. In my case, when building with GCC 7, dropbear doesn’t start, and when building with GCC 8, the system doesn’t boot, and the status LED is off.

The culprit is this line: https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=include/rootfs.mk;h=76425c017a8b33340dbcc41cecaf1241352c7dbc;hb=HEAD#l7

      # first find all programs and add them to the mklibs list
      find $(STAGING_DIR_ROOT) -type f -perm /100 -exec \
              file -r -N -F '' {} + | \
              awk ' /executable.*dynamically/ { print $$1 }' > $(TMP_DIR)/mklibs-progs

It should generate the list of executables for mklibs, however, with PIE turned on, most of the executables don’t get into that list. In my config, only fw_printenv gets into the mklibs-progs list. And, because some executables are not on the list, the symbols they need may be stripped off the libraries, rendering these executables unusable.

The reason is that the file command detects PIE executables as shared objects, not as executables. Compare:

  With ASLR off:
  bin/busybox ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-armhf.so.1, with debug_info, not stripped
  With ASLR on:
  bin/busybox ELF 32-bit LSB shared object, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-armhf.so.1, with debug_info, not stripped
  This one single executable displays the same, independently of ASLR state:
  usr/sbin/fw_printenv ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-armhf.so.1, stripped

If CONFIG_PKG_ASLR_PIE=n, all executables are detected properly and get into the mklibs-progs list.

A more proper way should be found to detect executables, as the current one skips PIE executables completely and makes the system unusable, because some of the PIE executables can’t start due to missing symbols in libraries.

I’ve chosen the critical severity, because the system doesn’t work if I set those two config options to y, and this combination isn’t something unusual, because many people would like both increased security and smaller size of the firmware.

14.11.20181950KernelBug ReportVery LowCriticalXWAY / BT Home Hub 2B - Wifi Random Disconnects Repeate...AllUnconfirmed Task Description

Very annoying wifi disconnects when connected to WDS-Repeater.
The AP works no disconnects but when connected to repeater random disconnects repeatedly.
Affected firmware release both LEDE 17.X.X and Openwrt 18.X.X

Note: Checked, WDS works fine on Previous Openwrt Releases(BarrierBreaker, ChaosCalmer) on same settings
https://openwrt.org/docs/guide-user/network/wifi/atheroswds

Attaching AP and Repeater Logs:

AP Config:

config wifi-device 'radio0'
	option type 'mac80211'
	option channel '5'
	option hwmode '11ng'
	option path 'pci0000:00/0000:00:0e.0'
	option htmode 'HT20'
	option country 'US'
	option txpower '22'
	option log_level '1'
	option macaddr 'be:b5:1b:b5:70:47'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'MyAP'
	option wds '1'
	option encryption 'psk2+ccmp'
	option key 'password'
	option wmm '1'

Repeater WDS Config:
Network

config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'fdd4:7f11:dd9a::/48'

config interface 'lan'
	option type 'bridge'
	option proto 'dhcp'
	option ifname 'eth1'

config switch
	option name 'switch0'
	option reset '1'
	option enable_vlan '1'

config switch_vlan
	option device 'switch0'
	option vlan '1'
	option vid '1'
	option ports '0 1 2 3 4'

Wireless WDS:

config wifi-device 'radio0'
	option type 'mac80211'
	option channel '5'
	option hwmode '11g'
	option path 'platform/ar934x_wmac'
	option htmode 'HT20'
	option country 'US'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'sta'
	option wds '1'
	option ssid 'MyAP'
	option bssid 'be:b5:1b:b5:70:47'
	option encryption 'psk2+ccmp'
	option key 'password'

config wifi-iface
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'MyAP'
	option encryption 'psk2+ccmp'
	option key 'password'
	option wmm '1'

Repeater WDS Log:

Wed Nov 14 12:26:05 2018 daemon.notice netifd: Network device 'wlan0' link is down
Wed Nov 14 12:26:05 2018 kern.info kernel: [ 5805.077610] br-lan: port 3(wlan0) entered disabled state
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:06 2018 daemon.notice netifd: Network device 'wlan0-1' link is down
Wed Nov 14 12:26:06 2018 kern.info kernel: [ 5806.068825] br-lan: port 2(wlan0-1) entered disabled state
Wed Nov 14 12:26:07 2018 daemon.notice netifd: bridge 'br-lan' link is down
Wed Nov 14 12:26:07 2018 daemon.notice netifd: Interface 'lan' has link connectivity loss
Wed Nov 14 12:26:07 2018 daemon.notice netifd: lan (1163): udhcpc: received SIGTERM
Wed Nov 14 12:26:07 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.220211] wlan0: authenticate with be:b5:1b:b5:70:47
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.243173] wlan0: send auth to be:b5:1b:b5:70:47 (try 1/3)
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.257141] wlan0: authenticated
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.268771] wlan0: associate with be:b5:1b:b5:70:47 (try 1/3)
Wed Nov 14 12:26:09 2018 daemon.notice netifd: Network device 'wlan0' link is up
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.282394] wlan0: RX AssocResp from be:b5:1b:b5:70:47 (capab=0x431 status=0 aid=5)
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.290756] wlan0: associated
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.309766] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.315545] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:09 2018 daemon.notice netifd: bridge 'br-lan' link is up
Wed Nov 14 12:26:09 2018 daemon.notice netifd: Interface 'lan' has link connectivity 
Wed Nov 14 12:26:09 2018 daemon.notice netifd: Interface 'lan' is setting up now
Wed Nov 14 12:26:09 2018 daemon.notice hostapd: wlan0-1: AP-STA-DISCONNECTED 00:00:00:00:00:14
Wed Nov 14 12:26:09 2018 daemon.notice netifd: lan (1293): udhcpc: started, v1.25.1
Wed Nov 14 12:26:09 2018 daemon.notice netifd: lan (1293): udhcpc: sending discover
Wed Nov 14 12:26:09 2018 daemon.notice netifd: lan (1293): udhcpc: sending select for 192.168.1.117
Wed Nov 14 12:26:09 2018 daemon.notice netifd: lan (1293): udhcpc: lease of 192.168.1.117 obtained, lease time 43200
Wed Nov 14 12:26:09 2018 daemon.notice netifd: Interface 'lan' is now up
Wed Nov 14 12:26:10 2018 kern.info kernel: [ 5810.201396] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:10 2018 kern.info kernel: [ 5810.207348] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:10 2018 daemon.notice netifd: Network device 'wlan0-1' link is up
Wed Nov 14 12:26:11 2018 kern.info kernel: [ 5811.308642] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:12 2018 kern.info kernel: [ 5812.198553] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:16 2018 daemon.info hostapd: wlan0-1: STA 00:00:00:00:00:14 IEEE 802.11: authenticated
Wed Nov 14 12:26:16 2018 daemon.info hostapd: wlan0-1: STA 00:00:00:00:00:14 IEEE 802.11: associated (aid 1)
Wed Nov 14 12:26:16 2018 daemon.notice hostapd: wlan0-1: AP-STA-CONNECTED 00:00:00:00:00:14
Wed Nov 14 12:26:16 2018 daemon.info hostapd: wlan0-1: STA 00:00:00:00:00:14 WPA: pairwise key handshake completed (RSN)
Wed Nov 14 12:26:25 2018 daemon.notice netifd: Network device 'wlan0' link is down
Wed Nov 14 12:26:25 2018 kern.info kernel: [ 5825.168505] br-lan: port 3(wlan0) entered disabled state
Wed Nov 14 12:26:25 2018 kern.info kernel: [ 5825.949685] wlan0: authenticate with be:b5:1b:b5:70:47
Wed Nov 14 12:26:25 2018 kern.info kernel: [ 5825.972671] wlan0: send auth to be:b5:1b:b5:70:47 (try 1/3)
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice netifd: Network device 'wlan0-1' link is down
Wed Nov 14 12:26:26 2018 kern.info kernel: [ 5826.168126] br-lan: port 2(wlan0-1) entered disabled state
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 kern.info kernel: [ 5826.788061] wlan0: send auth to be:b5:1b:b5:70:47 (try 2/3)
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 kern.info kernel: [ 5826.988066] wlan0: send auth to be:b5:1b:b5:70:47 (try 3/3)
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.008409] wlan0: authenticated
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.018301] wlan0: associate with be:b5:1b:b5:70:47 (try 1/3)
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.085692] wlan0: RX AssocResp from be:b5:1b:b5:70:47 (capab=0x431 status=0 aid=5)
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.094030] wlan0: associated
Wed Nov 14 12:26:27 2018 daemon.notice netifd: Network device 'wlan0' link is up
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.156807] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.162628] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:27 2018 daemon.notice hostapd: wlan0-1: AP-STA-DISCONNECTED 00:00:00:00:00:14
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.606090] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.612066] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:27 2018 daemon.notice netifd: Network device 'wlan0-1' link is up
Wed Nov 14 12:26:29 2018 kern.info kernel: [ 5829.157978] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:29 2018 kern.info kernel: [ 5829.607947] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:27:02 2018 daemon.notice netifd: Network device 'wlan0' link is down
Wed Nov 14 12:27:02 2018 kern.info kernel: [ 5862.141503] br-lan: port 3(wlan0) entered disabled state
Wed Nov 14 12:27:02 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:27:02 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.517323] ------------[ cut here ]------------
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.522138] WARNING: CPU: 0 PID: 980 at compat-wireless-2017-01-31/net/mac80211/ieee80211_i.h:1011 0x80d84e80 [mac80211@80d80000+0x607a0]()
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.535171] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_coWed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.600905] CPU: 0 PID: 980 Comm: hostapd Not tainted 4.4.153 #0
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] Stack : 803938d8 00000000 00000001 803f0000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  ...
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.644169] Call Trace:[<80071c44>] 0x80071c44
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.648814] [<80071c44>] 0x80071c44
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.652426] [<80081ac8>] 0x80081ac8
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.656035] [<80d84e80>] 0x80d84e80 [mac80211@80d80000+0x607a0]
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.662174] [<80081b80>] 0x80081b80
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.665784] [<80118460>] 0x80118460
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.669414] [<80d84e80>] 0x80d84e80 [mac80211@80d80000+0x607a0]
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.675533] [<80118460>] 0x80118460
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.679174] [<80d9f1cc>] 0x80d9f1cc [mac80211@80d80000+0x607a0]
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.685292] [<80118460>] 0x80118460
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.688933] [<80cda8bc>] 0x80cda8bc [cfg80211@80cc0000+0x36ba0]
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.695047] [<80118460>] 0x80118460
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.698680] [<802a6384>] 0x802a6384
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.702289] [<802a4b94>] 0x802a4b94
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.705911] [<802a60f0>] 0x802a60f0
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.709534] [<802a54d0>] 0x802a54d0
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.713145] [<80400000>] 0x80400000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.716753] [<802a60d8>] 0x802a60d8
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.720376] [<80268dd0>] 0x80268dd0
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.723986] [<802a4d34>] 0x802a4d34
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.727610] [<802682d4>] 0x802682d4
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.731228] [<802a52ac>] 0x802a52ac
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.734829] [<801bd428>] 0x801bd428
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.738447] [<8026cb54>] 0x8026cb54
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.742065] [<8025e448>] 0x8025e448
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.745677] [<8025f860>] 0x8025f860
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.749308] [<8025e448>] 0x8025e448
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.752914] [<802604a4>] 0x802604a4
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.756538] [<80260790>] 0x80260790
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.760162] [<800b2f2c>] 0x800b2f2c
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.763782] [<80062c6c>] 0x80062c6c
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.767401] 
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.768949] ---[ end trace 3926c6523a1013c9 ]---
17.12.20182009DocumentationBug ReportVery LowCriticalNetgear R8000 - Unable to install OpenWRT firmwareopenwrt-18.06Unconfirmed Task Description

Netgear R8000 - Unable to install OpenWRT firmware

https://openwrt.org/toh/netgear/r8000#tab__firmware_downloads

A recently purchased from Amazon Netgear R8000 (Nighthawk X6) refuses to accept the OpenWRT firmware file and there are not directions for an alternate installation method.

Full model from the back:

NETGEAR Nighthawk X6
AC3200 Tri-Band WiFiRouter
Model: R8000
FCCID: PY314200264
Made in Vietnam 272-12664-01

23.12.20182023PackagesBug ReportVery LowCriticalPPtP not connecting on Xiaomi Mi WiFi R3Gopenwrt-18.06Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on : Xiaomi Mi WiFi R3G (https://openwrt.org/toh/xiaomi/mir3g)
- OpenWrt 18.06.1

Steps to reproduce:

1.opkg update
2.opkg install ppp-mod-pptp
3.opkg install kmod-nf-nathelper-extra
4.opkg install kmod-ipt-raw
5.disabled rebind attack protection from DNS and DHCP
6.added below custom rule on /etc/firewall.user

iptables -t raw -A OUTPUT -p tcp -m tcp --dport 1723 -j CT --helper pptp

7.setup the PPTP in the LUCI
8.reboot

Relevant Logs appearing repetitively:

Sun Dec 23 17:48:01 2018 daemon.notice pppd[22738]: pppd 2.4.7 started by root, uid 0
Sun Dec 23 17:48:02 2018 kern.info kernel: [ 1551.622787] pptp-ISP: renamed from ppp0
Sun Dec 23 17:48:02 2018 daemon.info pppd[22738]: Using interface pptp-ISP Sun Dec 23 17:48:02 2018 daemon.notice pppd[22738]: Connect: pptp-ISP ←→ pptp (red.connect.net.pk)
Sun Dec 23 17:48:03 2018 daemon.notice pppd[22738]: CHAP authentication succeeded
Sun Dec 23 17:48:03 2018 daemon.notice pppd[22738]: Connection terminated.
Sun Dec 23 17:48:03 2018 daemon.warn pppd[22740]: read returned zero, peer has closed
Sun Dec 23 17:48:03 2018 daemon.warn pppd[22740]: read returned zero, peer has closed
Sun Dec 23 17:48:03 2018 daemon.info pppd[22738]: Exit.
Sun Dec 23 17:48:03 2018 daemon.notice netifd: Interface ‘ISP’ is now down
Sun Dec 23 17:48:03 2018 daemon.notice netifd: Interface ‘ISP’ is setting up now
Sun Dec 23 17:48:03 2018 daemon.info pppd[22998]: Plugin pptp.so loaded.
Sun Dec 23 17:48:03 2018 daemon.info pppd[22998]: PPTP plugin version 1.00
Sun Dec 23 17:48:03 2018 daemon.notice pppd[22998]: pppd 2.4.7 started by root, uid 0


01.01.20192040Base systemBug ReportVery LowCriticalgdb 8.2 fails to compile for Raspberry Pi 3B+TrunkUnconfirmed Task Description

- Device problem occurs on
Attempting build for Raspberry Pi 3B+ with gdbserver included

- Software versions of OpenWrt/LEDE release, packages, etc.
commit d3bf5ff9bc7b55b2a3dab93853b33a0cd2c4ca47 (HEAD → master, origin/master, origin/HEAD)
Author: Jonas Gorski jonas.gorski@gmail.com Date: Mon Sep 10 11:42:53 2018 +0200

- Steps to reproduce
(I successfully built and ran it without gdbserver.)
In menuconfig, selected the correct SoC, added Luci, then followed https://openwrt.org/docs/guide-developer/gdb:
“Compiling Tools” - exactly as described.
“Add debugging to a package” - option “Global build settings > Compile packages with debugging info” (whether this is activated or not has no effect on the problem)

gdb compilation for the target fails, see error below.

I reverted 2 last commits to the gdb package, to what it was at this commit:
commit 525b8f06501233414ad6e56fe1134ae82ab28fc2
Author: Rosen Penev rosenp@gmail.com
Date: Wed Jun 6 18:22:26 2018 -0700

using these commands:
cd package/devel
git checkout 525b8f06501 gdb

and the build succeeded. Looks like the updated gdb

.config is attached.


aarch64-openwrt-linux-musl-g++ -x c++ -Os -pipe -mcpu=cortex-a53 -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -iremap/mnt/1TB/ow/openwrt/build_dir/target-aarch64_cortex-a53_musl/gdb-8.2:gdb-8.2 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -I. -I. -I./common -I./config -DLOCALEDIR=”“/usr/share/locale”” -DHAVE_CONFIG_H -I./../include/opcode -I./../opcodes/.. -I./../zlib -I../bfd -I./../bfd -I./../include -I../libdecnumber -I./../libdecnumber -I./gnulib/import -Ibuild-gnulib/import -DTUI=1 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wunused-but-set-variable -Wno-sign-compare -Wno-narrowing -Wno-error=maybe-uninitialized -Wsuggest-override -Wimplicit-fallthrough=3 -Wduplicated-cond -Wformat-nonliteral -c -o aarch64-linux-nat.o -MT aarch64-linux-nat.o -MMD -MP -MF ./.deps/aarch64-linux-nat.Tpo aarch64-linux-nat.c
In file included from nat/aarch64-sve-linux-ptrace.h:23:0,
from aarch64-linux-nat.c:35:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/asm/sigcontext.h:26:8: error: redefinition of ‘struct sigcontext’ struct sigcontext {

In file included from /mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/signal.h:48:0,
from build-gnulib/import/signal.h:52,
from linux-nat.h:23,
from aarch64-linux-nat.c:26:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/bits/signal.h:18:16: note: previous definition of ‘struct sigcontext’ typedef struct sigcontext {

In file included from nat/aarch64-sve-linux-ptrace.h:23:0,
from aarch64-linux-nat.c:35:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/asm/sigcontext.h:63:8: error: redefinition of ‘struct _aarch64_ctx’ struct _aarch64_ctx {

In file included from /mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/signal.h:48:0,
from build-gnulib/import/signal.h:52,
from linux-nat.h:23,
from aarch64-linux-nat.c:26:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/bits/signal.h:29:8: note: previous definition of ‘struct _aarch64_ctx’ struct _aarch64_ctx {

In file included from nat/aarch64-sve-linux-ptrace.h:23:0,
from aarch64-linux-nat.c:35:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/asm/sigcontext.h:70:8: error: redefinition of ‘struct fpsimd_context’ struct fpsimd_context {

In file included from /mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/signal.h:48:0,
from build-gnulib/import/signal.h:52,
from linux-nat.h:23,
from aarch64-linux-nat.c:26:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/bits/signal.h:33:8: note: previous definition of ‘struct fpsimd_context’ struct fpsimd_context {

In file included from nat/aarch64-sve-linux-ptrace.h:23:0,
from aarch64-linux-nat.c:35:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/asm/sigcontext.h:80:8: error: redefinition of ‘struct esr_context’ struct esr_context {

In file included from /mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/signal.h:48:0,
from build-gnulib/import/signal.h:52,
from linux-nat.h:23,
from aarch64-linux-nat.c:26:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/bits/signal.h:39:8: note: previous definition of ‘struct esr_context’ struct esr_context {

In file included from nat/aarch64-sve-linux-ptrace.h:23:0,
from aarch64-linux-nat.c:35:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/asm/sigcontext.h:113:8: error: redefinition of ‘struct extra_context’ struct extra_context {

In file included from /mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/signal.h:48:0,
from build-gnulib/import/signal.h:52,
from linux-nat.h:23,
from aarch64-linux-nat.c:26:
/mnt/1TB/ow/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.4.0_musl/include/bits/signal.h:43:8: note: previous definition of ‘struct extra_context’ struct extra_context {

aarch64-linux-nat.c: In function ‘void store_sveregs_to_thread(regcache*)’:
aarch64-linux-nat.c:419:59: error: invalid use of incomplete type ‘struct store_sveregs_to_thread(regcache*)::user_sve_header’ iovec.iov_len = 1)→size;

aarch64-linux-nat.c:419:28: note: forward declaration of ‘struct store_sveregs_to_thread(regcache)::user_sve_header’ iovec.iov_len = 2)→size;

Makefile:1622: recipe for target ‘aarch64-linux-nat.o’ failed

1) struct user_sve_header ) base.get (
2) struct user_sve_header *) base.get (
21.01.20192070PackagesBug ReportVery LowCriticalbn_wexpand in bn_div.c are not checked for failure and ...openwrt-18.06Unconfirmed Task Description

Hi,
The code in the openwrt/package/network/services/ead/src/tinysrp/bn_div.c should be fixed to check the bn_wexpand return value. The problem exists in multiple other projects including openssl with CVE (CVE-2009-3245)(https://github.com/openssl/openssl/commit/2d9dcd4ff0923347fab727ac90e8526dd65e4e07).

21.01.20192072PackagesBug ReportVery LowCriticalbn_wexpand return value vulnerable to memory leakopenwrt-18.06Unconfirmed Task Description

Hi,
The code in the openwrt/package/network/services/ead/src/tinysrp/bn_div.c should be fixed to check the bn_wexpand return value. The problem exists in multiple other projects including openssl with CVE (CVE-2009-3245)(https://github.com/openssl/openssl/commit/2d9dcd4ff0923347fab727ac90e8526dd65e4e07).

21.01.20192073Base systemBug ReportVery LowCriticalSha1 in firmware-utils/src/sha1.c has TLS or DTLS Vulne...AllUnconfirmed Task Description

Hi,
The sha1 file in openwrt/tools/firmware-utils/src/sha1.c is not fixed and is vulnerable to remote code execution or DoS. The CVE (CVE-2018-0487) and fixed in multiple other repos including ubuntu. (https://people.canonical.com/~ubuntu-security/cve/2018/CVE-2018-0487.html)

23.01.20192079Base systemBug ReportVery LowCriticalMT7621 - lost RX streamAllUnconfirmed Task Description

Device: TP-LINK RE350 v1
OpenWRT: 18.06-SNAPSHOOT 22.01.2019
Wireless setup:

  config wifi-device 'radio0'
      option type 'mac80211'
      option channel '1'
      option hwmode '11g'
      option path 'pci0000:00/0000:00:00.0/0000:01:00.0'
      option ldpc '1'
      option greenfield '0'
      option diversity '1'
      option htmode 'HT40'
      option country 'PL'
      option log_level '8'
      option disabled '0'
      option legacy_rates '0'
      option noscan '1'
  config wifi-iface
      option device 'radio0'
      option mode 'sta'
      option ssid 'XXX'
      option bssid 'xxx'
      option encryption 'psk2'
      option key 'xxx'
      option disassoc_low_ack '0'
      option network 'wan'
      option disabled '0'
      option wmm '1'
  config wifi-iface
      option device 'radio0'
      option mode 'ap'
      option ssid 'XXX'
      option encryption 'psk2'
      option key 'xxx'
      option disassoc_low_ack '0'
      option network 'lan'
      option disabled '0'
      option wds '1'
      option wmm '1'

Problem and solution:
AP and STA works on Channel 1. STA few seconds after connection to upstream AP losts RX stream.

  Station xx:xx:xx:xx:xx:xx (on wlan0)
      inactive time:  20570 ms
      rx bytes:       222792
      rx packets:     1657
      tx bytes:       1482
      tx packets:     20
      tx retries:     133
      tx failed:      12
      beacon loss:    10
      beacon rx:      756
      rx drop misc:   2
      signal:         -68 [-68, -69] dBm
      signal avg:     -68 [-68, -68] dBm
      beacon signal avg:      188 dBm
      tx bitrate:     43.3 MBit/s MCS 10 short GI
      **rx bitrate:     1.0 MBit/s**
      authorized:     yes
      authenticated:  yes
      associated:     yes
      preamble:       long
      WMM/WME:        yes
      MFP:            no
      TDLS peer:      no
      DTIM period:    2
      beacon interval:100
      short slot time:yes
      connected time: 83 seconds
 


23.01.20192080PackagesBug ReportVery LowCriticalWan IPV6 interface with 6rd protocol reports bad mac ad...openwrt-18.06Unconfirmed Task Description

Device used is BT Home Hub 5 v1.2.
Openwrt release is 18.06.1,
6rd package version is 9-4
ISP is Free (France)

“Wan” interface, IPV4, with Dchp client protocol is up and works fine on physical interface dsl0.836.
Mac address has to be overriden because ISP uses a fixed mac address, different for each Freebox, it’s own dsl modem/box.

“Wan6”, IPV6, interface with 6rd protocol is up but the mac reported in the not the same as those reported in “Wan” interface.

As you could see on the attached capture of the “Interfaces overview”, the mac address reported is the “Wan” IpV4 address !!!

Wan6 interface is up but frames are rejected by ISP because the mac address is not those one expected as for “Wan” interface. Mac address can’t be overriden on these interface.

network config is attached.



Cromagnon31

10.02.20192115KernelBug ReportVery LowCriticalkernel panic with Hardware flow offloading on ubnt-x (M...TrunkUnconfirmed Task Description

hardware ubnt-x (edgerouter-x)
openwrt: OpenWrt SNAPSHOT, r9293-e3311cb

I turn on hardware offload and system went south (hangup). Automatic hard
reset (by kernel itself or because of watchcat)
But syslogd logs to other machine and
this is what I found in logs:

Feb 10 21:04:59 thorgal kernel: [ 6300.830740]  (t=6003 jiffies g=60795 c=60794 q=1375)
Feb 10 21:04:59 thorgal kernel: [ 6300.860492] (detected by 1, t=6006 jiffies, g=60795, c=60794, q=1375)
Feb 10 21:04:59 thorgal kernel: [ 6300.863610] rcu_sched       I
Feb 10 21:04:59 thorgal kernel: [ 6300.884363] Sending NMI from CPU 1 to CPUs 3:
Feb 10 21:04:59 thorgal kernel: [ 6300.897157]     0     8      2 0x00100000
Feb 10 21:04:59 thorgal kernel: [ 6300.919637] Stack : 805b0000 8fc42bc0 8fc5fe30 8fc5fe30 81222380 8fc5fe30 805b0000 81222380
Feb 10 21:04:59 thorgal kernel: [ 6300.936268]         00000003 80086ddc 000912c6 81222380 81222380 8fc5fe30 805b0000 81222380
Feb 10 21:04:59 thorgal kernel: [ 6300.952899]         00000003 805ae1b8 805b6550 80491eec 00000001 8fc5fe30 805b0000 000912c6
Feb 10 21:04:59 thorgal kernel: [ 6300.969530]         81222380 80494e14 00000003 80082e28 805b0000 00000000 8fc5febc 00000001
Feb 10 21:04:59 thorgal kernel: [ 6300.986160]         00000000 812223f4 000912c6 8008732c 8fc42bc0 01c00001 00000001 805b6440
Feb 10 21:04:59 thorgal kernel: [ 6301.002793]         ...
Feb 10 21:04:59 thorgal kernel: [ 6301.007654] Call Trace:
Feb 10 21:04:59 thorgal kernel: [ 6301.012531] [<80491dcc>] __schedule+0x7ac/0x860
Feb 10 21:04:59 thorgal kernel: [ 6301.021543] [<80491eec>] schedule+0x6c/0x84
Feb 10 21:04:59 thorgal kernel: [ 6301.029863] [<80494e14>] schedule_timeout+0x17c/0x1b8
Feb 10 21:04:59 thorgal kernel: [ 6301.039912] [<80083444>] rcu_gp_kthread+0x560/0x950
Feb 10 21:04:59 thorgal kernel: [ 6301.049626] [<8004c1b8>] kthread+0x130/0x144
Feb 10 21:04:59 thorgal kernel: [ 6301.058120] [<8000b0d8>] ret_from_kernel_thread+0x14/0x1c
Feb 10 21:04:59 thorgal kernel: [ 6304.380977] NMI backtrace for cpu 3
Feb 10 21:04:59 thorgal kernel: [ 6304.387914] CPU: 3 PID: 2514 Comm: kworker/3:1 Not tainted 4.14.98 #0
Feb 10 21:04:59 thorgal kernel: [ 6304.400742] Workqueue: events rht_deferred_worker
Feb 10 21:04:59 thorgal kernel: [ 6304.410088] Stack : 8053ac44 8fc15d24 805b0000 8e9f3280 8053acd8 00000003 805b6440 805ae0ac
Feb 10 21:04:59 thorgal kernel: [ 6304.426716]         000000e0 800705fc 8ff0af3c 805b0947 805b0000 00000001 8fc15ce8 53261683
Feb 10 21:04:59 thorgal kernel: [ 6304.443343]         00000000 00000000 00000000 00003c40 00000000 000000dd 00000008 00000000
Feb 10 21:04:59 thorgal kernel: [ 6304.459969]         00000000 805b0000 00061d66 00000000 00000000 00000000 805d0000 00000003
Feb 10 21:04:59 thorgal kernel: [ 6304.476595]         805b6440 805ae0ac 000000e0 805b0000 00000000 802a4378 0000000c 8061000c
Feb 10 21:04:59 thorgal kernel: [ 6304.493222]         ...
Feb 10 21:04:59 thorgal kernel: [ 6304.498076] Call Trace:
Feb 10 21:04:59 thorgal kernel: [ 6304.502943] [<800106c0>] show_stack+0x58/0x100
Feb 10 21:04:59 thorgal kernel: [ 6304.511777] [<80478bfc>] dump_stack+0x9c/0xe0
Feb 10 21:04:59 thorgal kernel: [ 6304.520447] [<8047fa94>] nmi_cpu_backtrace+0xe4/0x108
Feb 10 21:04:59 thorgal kernel: [ 6304.530488] [<8047fb80>] nmi_trigger_cpumask_backtrace+0xc8/0x168
Feb 10 21:04:59 thorgal kernel: [ 6304.542606] [<80084dd8>] rcu_dump_cpu_stacks+0xc4/0x13c
Feb 10 21:04:59 thorgal kernel: [ 6304.552993] [<80084228>] rcu_check_callbacks+0x3b4/0x8b8
Feb 10 21:04:59 thorgal kernel: [ 6304.563560] [<800877a8>] update_process_times+0x34/0x7c
Feb 10 21:04:59 thorgal kernel: [ 6304.573963] [<8009838c>] tick_handle_periodic+0x34/0xd0
Feb 10 21:04:59 thorgal kernel: [ 6304.584364] [<803275e0>] gic_compare_interrupt+0x70/0x80
Feb 10 21:04:59 thorgal kernel: [ 6304.594930] [<80077ba0>] handle_percpu_devid_irq+0xbc/0x1a8
Feb 10 21:04:59 thorgal kernel: [ 6304.606024] [<80071ef0>] generic_handle_irq+0x40/0x58
Feb 10 21:04:59 thorgal kernel: [ 6304.616071] [<8025339c>] gic_handle_local_int+0x9c/0xe8
Feb 10 21:04:59 thorgal kernel: [ 6304.626458] [<8025355c>] gic_irq_dispatch+0x10/0x20
Feb 10 21:04:59 thorgal kernel: [ 6304.636153] [<80071ef0>] generic_handle_irq+0x40/0x58
Feb 10 21:04:59 thorgal kernel: [ 6304.646199] [<80495fcc>] do_IRQ+0x1c/0x2c
Feb 10 21:04:59 thorgal kernel: [ 6304.654166] [<8025252c>] plat_irq_dispatch+0xfc/0x138
Feb 10 21:04:59 thorgal kernel: [ 6304.664209] [<8000b5e8>] except_vec_vi_end+0xb8/0xc4
Feb 10 21:04:59 thorgal kernel: [ 6304.674076] [<8006a94c>] queued_spin_lock_slowpath+0x1dc/0x2e0
Feb 10 21:04:59 thorgal kernel: [ 6304.685677] [<802386ac>] rht_deferred_worker+0x20c/0x4f0
Feb 10 21:04:59 thorgal kernel: [ 6304.696236] [<80046230>] process_one_work+0x258/0x400
Feb 10 21:04:59 thorgal kernel: [ 6304.706276] [<80046728>] worker_thread+0x350/0x5b4
Feb 10 21:04:59 thorgal kernel: [ 6304.715806] [<8004c1b8>] kthread+0x130/0x144
Feb 10 21:04:59 thorgal kernel: [ 6304.724291] [<8000b0d8>] ret_from_kernel_thread+0x14/0x1c
19.02.20192133KernelBug ReportVery LowCriticallan rx performance on IPQ806X (R7800) AllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on R7800
- Software versions of OpenWrt 18.06/Trunk

Firstly ,I found my ps4 download speed only 100mbps,so I’ve run iperf3
The lan rx work in problem ,tx works no problem.
One pair rx only 18mbps ten pair rx only 100mbps but tx can run in 1gbps.

So I change to offical 18.06.2 banch,rx is 400mbps ,tx is 1Gbps. Still in problem.
After I compile trunk banch ,it also WIP as 18.06 banch.

This problem also mentioned in FS#1598

22.02.20192140KernelBug ReportVery LowCriticalKernel hang when replace older uboot with uboot 2019 fo...TrunkUnconfirmed Task Description

Below is the log:

U-Boot 2019.01-00079-g3420a6fc6e-dirty (Feb 19 2019 - 17:19:16 +0800)

Qualcomm Atheros QCA9561 ver 1 rev 0
Model: AP152 Reference Board
DRAM:  128 MiB
Loading Environment from SPI Flash... SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB, mapped at 9f000000
*** Warning - bad CRC, using default environment

In:    uart@18020000
Out:   uart@18020000
Err:   uart@18020000
Net:   
Warning: eth@0x19000000 (eth0) using random MAC address - 56:87:3c:61:9b:50
eth0: eth@0x19000000
Hit any key to stop autoboot:  0 
ap152 # bootm 0x1f060000
## Booting kernel from Legacy Image at 1f060000 ...
   Image Name:   MIPS OpenWrt Linux-4.14.101
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1615030 Bytes = 1.5 MiB
   Load Address: 80060000
   Entry Point:  80060000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
[    0.000000] Linux version 4.14.101 (xxx@xxx-PC) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r8997-488af51f81)) #0 Mon Feb 18 15:11:32 2019
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] MIPS: machine is ROSINSON WR818
[    0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 123184K/131072K available (3777K kernel code, 150K rwdata, 912K rodata, 1232K init, 204K bss, 7888K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] CPU clock: 775.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
[    0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
[    0.008841] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.075897] pid_max: default: 32768 minimum: 301
[    0.081292] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.088805] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100195] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.111385] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.118370] pinctrl core: initialized pinctrl subsystem
[    0.125117] NET: Registered protocol family 16
[    0.152720] clocksource: Switched to clocksource MIPS
[    0.159331] NET: Registered protocol family 2
[    0.164932] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.172894] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.180116] TCP: Hash tables configured (established 1024 bind 1024)
[    0.187461] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.194136] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.201461] NET: Registered protocol family 1
[    0.209168] Crashlog allocated RAM at address 0x3f00000
[    0.216385] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.227688] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.234346] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.253234] io scheduler noop registered
[    0.257682] io scheduler deadline registered (default)
[    0.263810] ar7200-usb-phy usb-phy: phy reset is missing
[    0.271331] pinctrl-single 1804002c.pinmux: 544 pins at pa b804002c size 68
[    0.280201] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.288040] console [ttyS0] disabled
[    0.292122] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 8, base_baud = 1562500) is a 16550A
[    0.301943] console [ttyS0] enabled
[    0.301943] console [ttyS0] enabled
[    0.309500] bootconsole [early0] disabled
[    0.309500] bootconsole [early0] disabled
[    0.332542] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.337492] 5 fixed-partitions partitions found on MTD device spi0.0
[    0.344060] Creating 5 MTD partitions on "spi0.0":
[    0.349014] 0x000000000000-0x000000040000 : "u-boot"
[    0.354834] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.360944] 0x000000050000-0x000000060000 : "factory"
[    0.366831] 0x000000060000-0x000000fe0000 : "firmware"
[    0.374973] 2 uimage-fw partitions found on MTD device firmware
[    0.381090] Creating 2 MTD partitions on "firmware":
[    0.386258] 0x000000000000-0x000000190000 : "kernel"
[    0.392027] 0x000000190000-0x000000f80000 : "rootfs"
[    0.397783] mtd: device 5 (rootfs) set to be root filesystem
[    0.403703] 1 squashfs-split partitions found on MTD device rootfs
[    0.410095] 0x000000440000-0x000000f80000 : "rootfs_data"
[    0.416295] 0x000000ff0000-0x000001000000 : "art"
[    0.422691] libphy: Fixed MDIO Bus: probed
[    0.763078] libphy: ag71xx_mdio: probed
[    0.770036] switch0: Atheros AR8337 rev. 2 switch registered on mdio-bus.0
[    1.424526] ag71xx 19000000.eth: invalid MAC address, using random address
[    1.763882] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
[    1.775479] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:SGMII
[    1.783515] NET: Registered protocol family 10
[    1.791439] Segment Routing with IPv6
[    1.795358] NET: Registered protocol family 17
[    1.799984] 8021q: 802.1Q VLAN Support v1.8
[    1.810014] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    1.824049] Freeing unused kernel memory: 1232K
[    1.828729] This architecture does not have kernel memory protection.

By the way, for the ath79 target(linux-4.14) after I enable CONFIG_MIPS32R2_IRQ_VI options, it works fine.
But still hang in ar71xx(linux-4.9.158).

25.02.20192145Base systemBug ReportVery LowCriticalNo IPv4 adresses offered on LAN of GL-AR150 if no LAN c...openwrt-18.06Unconfirmed Task Description

This is 100 % reproducible with a fresh and unchanged installation of OpenWRT 18.06.2 on a GL-Inet GL-AR150, and it gave me quite some headache until I found out what’s happening here:

If a LAN cable is plugged during the device’s boot process and one does a DHCP request when it’s ready, the router offers an IPv4 address (as expected) and one can access it on 192.168.1.1. This is also the case for a DHCP request via WLAN, as soon as one does enable it.

If however the device is powered up without a LAN cable being plugged, no IPv4 address will be offered, neither for a LAN nor for a WLAN connection. One can connect to the router via the IPv6 address to be found in /etc/resov.conf (on the client) though, but not via IPv4. This is also the case if a LAN cable is plugged after booting.

Looking at /var/etc/dnsmasq.conf.cfg01411c, it does contain the line

  dhcp-range=set:lan,192.168.1.100,192.168.1.249,255.255.255.0,12h

if a LAN cable has been plugged during bootup, and no such entry if none has been plugged.

This makes the device completely unusable for what I intend to use it ... as this happens with a completely unaltered, fresh installation, I suppose this is no misconfiguration but a bug?

02.04.20192218Base systemBug ReportVery LowCriticalLinksys EA4500 suffers endless reboots: Radio1 (5GHz) c...TrunkUnconfirmed Task Description

One of 5 EA3500’s, each at a different site, keeps crashing and restarting. Both 18.06.2 and Snapshot r9614-b614954 are suffering it at this particular site. I could finally keep it booting up after disabling radio1 (5 GHz). Other 4 sites have no trouble with the same system and wireless configuration.

I can pretty much rule out hardware problems. Just boot up Snapshot r9614-b614954 on an EA4500, whose radio1 (5G) worked on another site. It suffers the same infinite crash/restart sequence. At least 3 different devices worked at different locations, but crash only at this one.

From the serial console: A crash at backports-4.19.23-1/net/mac80211/rx.c:4516 ieee80211_rx_napi+0x1fc/0xa54 [mac80211]

[   22.960919] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.010664] br-lan: port 1(eth0.1) entered blocking state
[   23.016172] br-lan: port 1(eth0.1) entered disabled state
[   23.021848] device eth0.1 entered promiscuous mode
[   23.026687] device eth0 entered promiscuous mode
[   23.110502] br-lan: port 1(eth0.1) entered blocking state
[   23.115976] br-lan: port 1(eth0.1) entered forwarding state
[   23.121730] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   23.191580] mv643xx_eth_port mv643xx_eth_port.1 eth1: link up, 1000 Mb/s, full duplex, flow control disabled
[   23.202650] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   24.009012] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   24.015903] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   24.022546] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   25.052979] 0000:01:00.0: unable to load firmware helper image
[   25.058872] ieee80211 phy0: Cannot start firmware
[   25.063675] ieee80211 phy0: Trying to reload the firmware again
[   25.987785] ieee80211 phy0: 88w8366 v7, 20aa4b891bf2, AP firmware 5.2.8.17
[   26.047574] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.113947] 0000:02:00.0: unable to load firmware helper image
[   26.119821] ieee80211 phy1: Cannot start firmware
[   26.124636] ieee80211 phy1: Trying to reload the firmware again
[   26.511780] ieee80211 phy1: 88w8366 v7, 20aa4b891bf4, AP firmware 5.2.8.17
[   26.565994] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   26.577344] br-lan: port 2(wlan0) entered blocking state
[   26.582745] br-lan: port 2(wlan0) entered disabled state
[   26.588309] device wlan0 entered promiscuous mode
[   26.614795] br-lan: port 3(wlan1) entered blocking state
[   26.620186] br-lan: port 3(wlan1) entered disabled state
[   26.625800] device wlan1 entered promiscuous mode
[   27.137261] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   27.143826] br-lan: port 2(wlan0) entered blocking state
[   27.149170] br-lan: port 2(wlan0) entered forwarding state
[   27.179154] ------------[ cut here ]------------
[   27.183961] WARNING: CPU: 0 PID: 0 at backports-4.19.23-1/net/mac80211/rx.c:4516 ieee80211_rx_napi+0x1fc/0xa54 [mac80211]
[   27.194991] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mwl8k mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 tun gpio_button_hotplug
[   27.254721] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.105 #0
[   27.260669] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[   27.266969] Backtrace: 
[   27.269438] [<c010530c>] (dump_backtrace) from [<c01055f4>] (show_stack+0x18/0x1c)
[   27.277057]  r7:bf1f012c r6:00000000 r5:bf227600 r4:00000000
[   27.282772] [<c01055dc>] (show_stack) from [<c058b880>] (dump_stack+0x20/0x28)
[   27.290036] [<c058b860>] (dump_stack) from [<c01196b0>] (__warn+0xdc/0x108)
[   27.297048] [<c01195d4>] (__warn) from [<c0119794>] (warn_slowpath_null+0x28/0x30)
[   27.304665]  r9:c7104ff0 r8:bf226390 r7:bf226318 r6:c71058a0 r5:c7104bc0 r4:c72be9c0
[   27.312535] [<c011976c>] (warn_slowpath_null) from [<bf1f012c>] (ieee80211_rx_napi+0x1fc/0xa54 [mac80211])
[   27.322376] [<bf1eff30>] (ieee80211_rx_napi [mac80211]) from [<bf1cb68c>] (ieee80211_tasklet_handler+0x64/0xc0 [mac80211])
[   27.333486]  r10:00000000 r9:c7104ff0 r8:bf226390 r7:bf226318 r6:c7104bc0 r5:c7104fe4
[   27.341359]  r4:c72be9c0
[   27.343976] [<bf1cb628>] (ieee80211_tasklet_handler [mac80211]) from [<c011c5dc>] (tasklet_action+0x88/0xd8)
[   27.353865]  r9:00000100 r8:ffffe000 r7:00000000 r6:c082a000 r5:c08085fc r4:00000000
[   27.361664] [<c011c554>] (tasklet_action) from [<c0101464>] (__do_softirq+0xac/0x25c)
[   27.369534]  r7:c082a020 r6:40000006 r5:c082a038 r4:00000006
[   27.375236] [<c01013b8>] (__do_softirq) from [<c011c940>] (irq_exit+0xc8/0x110)
[   27.382594]  r10:00000000 r9:c0801f00 r8:c7805200 r7:00000001 r6:00000000 r5:c0829178
[   27.390458]  r4:00000000
[   27.393022] [<c011c878>] (irq_exit) from [<c01465e4>] (__handle_domain_irq+0x8c/0xa8)
[   27.400893] [<c0146558>] (__handle_domain_irq) from [<c010138c>] (orion_handle_irq+0x74/0xa0)
[   27.409469]  r9:c0801f00 r8:00000001 r7:c085564c r6:c780801c r5:00000400 r4:0000000a
[   27.417263] [<c0101318>] (orion_handle_irq) from [<c01060c8>] (__irq_svc+0x68/0x84)
[   27.424968] Exception stack(0xc0801f00 to 0xc0801f48)
[   27.430044] 1f00: 00000000 00000000 00000000 60000013 00000000 ffffe000 c0803094 c08206e0
[   27.438271] 1f20: c080a852 c065e3e0 00000000 c0801f5c c0801f50 c0801f50 c0102ec0 c05a6814
[   27.446494] 1f40: 60000013 ffffffff
[   27.450004]  r10:00000000 r9:c0800000 r8:c080a852 r7:c0801f34 r6:ffffffff r5:60000013
[   27.457875]  r4:c05a6814
[   27.460441] [<c05a67dc>] (default_idle_call) from [<c013fdb8>] (do_idle+0x84/0x144)
[   27.468154] [<c013fd34>] (do_idle) from [<c01400d8>] (cpu_startup_entry+0x14/0x18)
[   27.475774]  r10:00721c14 r9:c0723a20 r8:c7ffcc80 r7:00000000 r6:c0803020 r5:ffffffff
[   27.483654]  r4:c0809c4c r3:40000013
[   27.487258] [<c01400c4>] (cpu_startup_entry) from [<c05a1660>] (rest_init+0x74/0x94)
[   27.495063] [<c05a15ec>] (rest_init) from [<c0700d3c>] (start_kernel+0x3a0/0x424)
[   27.502595]  r5:ffffffff r4:c08299a0
[   27.506188] [<c070099c>] (start_kernel) from [<00008048>] (0x8048)
[   27.512404] ---[ end trace 351d5fe97981d9fa ]---
09.05.20192276OtherBug ReportVery LowCriticalThe path to read temperature in fan_ctrl.sh needs to be...TrunkUnconfirmed Task Description

[openwrt/openwrt.git] / target / linux / mvebu / base-files / sbin / fan_ctrl.sh

CPU_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon2/temp1_input`
DDR_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon1/temp1_input`
WIFI_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon1/temp2_input`

These three paths are wrong, I found these three:
CPU_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon1/temp1_input`
DDR_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon0/temp1_input`
WIFI_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon0/temp2_input`

11.06.20192316KernelBug ReportVery LowCriticalKernel's iptables crash unexpectedlyTrunkWaiting on reporter Task Description

<Xiaomi Mi Router 3G / OpenWrt SNAPSHOT, r10173-6b762dd>
My router sometimes restart unexpectedly with no reason. Here’s the kernel’s crash log (/sys/kernel/debug/crashlog)

<0>[12930.571103] usercopy: kernel memory overwrite attempt detected to c2651000 (kmalloc-2048) (5408 bytes)
<4>[12930.580437] Kernel bug detected[#1]:
<4>[12930.584007] CPU: 2 PID: 28709 Comm: iptables Not tainted 4.14.123 #0
<4>[12930.590333] task: 8186ddc0 task.stack: 81fe4000
<4>[12930.594840] $ 0   : 00000000 00000001 0000005a 00000000
<4>[12930.600054] $ 4   : 8122d33c 8122d33c 81231e78 00007388
<4>[12930.605266] $ 8   : 00000000 00000194 00000008 00000000
<4>[12930.610476] $12   : 00000000 805c0000 0008b6df 00000000
<4>[12930.615697] $16   : c2651000 00001520 00000000 c2652520
<4>[12930.620906] $20   : 006678e0 00001548 00000000 77fca000
<4>[12930.626115] $24   : 00000001 802ab558
<4>[12930.631326] $28   : 81fe4000 81fe5dc0 00000000 80116360
<4>[12930.636539] Hi    : 00000124
<4>[12930.639403] Lo    : 74e58000
<4>[12930.642286] epc   : 80116360 __check_object_size+0x1b0/0x1e0
<4>[12930.647921] ra    : 80116360 __check_object_size+0x1b0/0x1e0
<4>[12930.653549] Status: 11007c03      KERNEL EXL IE
<4>[12930.657721] Cause : 50800024 (ExcCode 09)
<4>[12930.661707] PrId  : 0001992f (MIPS 1004Kc)
<4>[12930.665796] Modules linked in: pppoe ppp_async pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp
<4>[12930.736837]  nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat fuse sch_cake nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter
<4>[12930.808159]  ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip_gre gre ifb ip_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 sha1_generic ecb usb_storage sd_mod scsi_mod ext4 mbcache jbd2 crc32c_generic leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
<4>[12930.835248] Process iptables (pid: 28709, threadinfo=81fe4000, task=8186ddc0, tls=77fd8eb8)
<4>[12930.843554] Stack : 818c0040 8055090c 8055e4c8 c2651000 8054f124 00001520 00000000 00001520
<4>[12930.851887]         c2651000 00667908 805d9980 8ead1c3c 818c0000 818c0040 c264e000 805b0000
<4>[12930.860223]         805b0000 805e0000 00000041 8f1b9c98 805d9980 c264e000 0066a000 81fe5e34
<4>[12930.868560]         8adcd004 006663b0 81840040 805d9980 00000000 00000000 746c6966 00007265
<4>[12930.876894]         00000000 00000000 00000000 00000000 00000000 00000000 00000152 00000000
<4>[12930.885244]         ...
<4>[12930.887733] Call Trace:
<4>[12930.890172] [<80116360>] __check_object_size+0x1b0/0x1e0
<4>[12930.895540] [<8ead1c3c>] xt_copy_counters_from_user+0xac/0x158 [x_tables]
<4>[12930.902322] [<8f1b9c98>] ipt_register_table+0x508/0xdf8 [ip_tables]
<4>[12930.908568] Code: 02003825  0c01d530  24840924 <000c000d> 8fb30028  8fb20024  8fb10020  8fb0001c  03e00008
<4>[12930.918296]
<4>[12930.920137] ---[ end trace 0d59c51a87e12512 ]---
06.07.20192359Base systemBug ReportVery LowCriticalAble to use channels out of regulatory domain(ES) in 5...TrunkUnconfirmed Task Description

Device: TP-Link Archer C7 v5 (ath79)
Software versions of OpenWrt: latest snapshot https://downloads.openwrt.org/snapshots/targets/ath79/generic/openwrt-ath79-generic-tplink_archer-c7-v5-squashfs-sysupgrade.bin

Anything upper 5700 MHz [140] should be disabled.

iw list:

              [...]
              Frequencies:
                      * 5180 MHz [36] (23.0 dBm)
                      * 5200 MHz [40] (23.0 dBm)
                      * 5220 MHz [44] (23.0 dBm)
                      * 5240 MHz [48] (23.0 dBm)
                      * 5260 MHz [52] (20.0 dBm) (radar detection)
                      * 5280 MHz [56] (20.0 dBm) (radar detection)
                      * 5300 MHz [60] (20.0 dBm) (radar detection)
                      * 5320 MHz [64] (20.0 dBm) (radar detection)
                      * 5500 MHz [100] (26.0 dBm) (radar detection)
                      * 5520 MHz [104] (26.0 dBm) (radar detection)
                      * 5540 MHz [108] (26.0 dBm) (radar detection)
                      * 5560 MHz [112] (26.0 dBm) (radar detection)
                      * 5580 MHz [116] (26.0 dBm) (radar detection)
                      * 5600 MHz [120] (26.0 dBm) (radar detection)
                      * 5620 MHz [124] (26.0 dBm) (radar detection)
                      * 5640 MHz [128] (26.0 dBm) (radar detection)
                      * 5660 MHz [132] (26.0 dBm) (radar detection)
                      * 5680 MHz [136] (26.0 dBm) (radar detection)
                      * 5700 MHz [140] (26.0 dBm) (radar detection)
                      * 5720 MHz [144] (disabled)
                      * 5745 MHz [149] (13.0 dBm)
                      * 5765 MHz [153] (13.0 dBm)
                      * 5785 MHz [157] (13.0 dBm)
                      * 5805 MHz [161] (13.0 dBm)
                      * 5825 MHz [165] (13.0 dBm)
                      * 5845 MHz [169] (13.0 dBm)
                      * 5865 MHz [173] (13.0 dBm)
              [...]
09.07.20192370Base systemBug ReportVery LowCriticalCPE210 V1.1 Brick after update 18.06.04openwrt-18.06Unconfirmed Task Description

Trying to update to the latest version (openwrt-18.06.4-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin) has failed and has entered into safeloader. I put it to your knowledge in case there is a fault in the firmware.

CPE210 V1.1 with openwrt-18.06.2-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin

With a USB serial cable:

“TP-LINK SafeLoader (Build time: Jun 12 2015 - 09:49:53)
CPU: 560MHz AHB: 225MHz DDR: 64MB
Performing LED check.. PASS
Press CTRL+B to enter SafeLoader: 1
Flash Manufacturer: Unknown(0xc8)
Flash Device ID: Unknown(0×4017)
Data flash init failed.
open user-config failed.
open user-config failed.

enet0 port4 up

TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename ‘recovery.bin’.

TFTP error: Starting again.
faddr is 0×0, fsize is 0×0 reserved is 0x83832c86, load_reserved_size is 0×0 WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##Warning: File is unidentiable. Try downloading

TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename ‘vmlinuz’.

TFTP error: Starting again.
faddr is 0×0, fsize is 0×0 reserved is 0×83832206, load_reserved_size is 0×0 WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##ERROR: Can’t download image.

Password”

01.08.20192419Base systemBug ReportVery LowCriticaloverlay reporting wrong sizeTrunkWaiting on reporter Task Description
DEVICE: APU2 X86_64 SNAPSHOT
FIRMWARE USED: http://downloads.openwrt.org/snapshots/targets/x86/64/openwrt-x86-64-combined-squashfs.img.gz
FIRMWARE SHA256: cf0824377d5a8d9832f5e6f60c78f9ae2f6841d4b9cd3c57f9cfdf72e4f47e81
FIRMWARE DATE: Wed Jul 31 18:02:58 2019
FIRMWARE SIZE: 7146.8 KB

BusyBox v1.31.0 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r10641-1d2b2e744e
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:/# df -hT
Filesystem           Type            Size      Used Available Use% Mounted on
/dev/root            squashfs        2.5M      2.5M         0 100% /rom
tmpfs                tmpfs           1.9G     72.0K      1.9G   0% /tmp
/dev/loop0           f2fs          123.5M     65.6M     57.9M  53% /overlay
overlayfs:/overlay   overlay       123.5M     65.6M     57.9M  53% /
/dev/mmcblk0p1       ext4           15.7M      4.3M     11.1M  28% /boot
/dev/mmcblk0p1       ext4           15.7M      4.3M     11.1M  28% /boot
tmpfs                tmpfs         512.0K         0    512.0K   0% /dev
root@OpenWrt:/# find /overlay
/overlay
/overlay/upper
/overlay/upper/boot
/overlay/upper/etc
/overlay/upper/etc/board.json
/overlay/upper/etc/config
/overlay/upper/etc/config/network
/overlay/upper/etc/config/system
/overlay/upper/etc/config/dhcp
/overlay/upper/etc/config/dropbear
/overlay/upper/etc/config/firewall
/overlay/upper/etc/uci-defaults
/overlay/upper/etc/uci-defaults/10_migrate-shadow
/overlay/upper/etc/uci-defaults/12_network-generate-ula
/overlay/upper/etc/uci-defaults/13_fix_group_user
/overlay/upper/etc/uci-defaults/20_migrate-feeds
/overlay/upper/etc/uci-defaults/odhcpd.defaults
/overlay/upper/etc/dropbear
/overlay/upper/etc/dropbear/dropbear_rsa_host_key
/overlay/upper/etc/urandom.seed
/overlay/work
/overlay/work/work
/overlay/.fs_state
root@OpenWrt:/#

05.08.20192428Base systemBug ReportVery LowCriticalath79: sysupgrade will brick devices with RedBoot bootl...TrunkUnconfirmed Task Description

The current code responsible for upgrading devices with sysupgrade image, doesn’t take in to the account that “FIS” partition and “RedBoot config” partition can be on the same erase block. This can cause erasing the “RedBoot config” partition and make the device inoperable. The recovery would involve external SPI programmer or usage of JTAG.

The cause is still assumption so it will need confirmation. Flashing devices with factory image should be safe.

- Device problem occurs on:

   Ubiquiti RouterStation and RouterStation Pro
   jjPlus JA76PF2
   Adtran BSAP1880, BSAP1800 V2 and BSAP1840

- Software versions of OpenWrt release, packages, etc.:

   master and possibly 19.07

- Steps to reproduce

   syupgrade the device
14.11.20192594Base systemBug ReportVery LowCriticalKernel panic when configuring network on mvebu ( Turris...TrunkUnconfirmed Task Description

- Latest snapshot from today
- Does not happen on 18.0.6.x
- Router enters reboot loop

Several ways to trigger bug but it essentially revolves around bringing up a VLAN interface inside a bridge.

Some configuration examples that triggers the bug:

config interface 'lan'
        option type 'bridge'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option delegate '0'
        option igmp_snooping '1'
        option ifname 'lan0 lan1 lan2 lan3 lan4.12'
        option ipaddr '192.168.88.254'


another one:

config interface 'iptv'
        option proto 'none'
        option type 'bridge'
        option ifname 'eth2.12 lan4.12'

The output is:

[   16.828573] device lan3 entered promiscuous mode
[   16.876458] mv88e6085 f1072004.mdio-mii:10 lan4: configuring for phy/gmii link mode
[   16.884237] IPv6: ADDRCONF(NETDEV_UP): lan4: link is not ready
[   16.891531] br-lan: port 5(lan4.12) entered blocking state
[   16.897098] br-lan: port 5(lan4.12) entered disabled state
[   16.904047] device lan4.12 entered promiscuous mode
[   16.908940] device lan4 entered promiscuous mode
[   16.918101] Unable to handle kernel NULL pointer dereference at virtual address 00000518
[   16.926236] pgd = 6295ce7a
[   16.928948] [00000518] *pgd=2da78831, *pte=00000000, *ppte=00000000
[   16.935252] Internal error: Oops: 17 [#1] SMP ARM
[   16.939965] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath pptp pppox ppp_mppe ppp_generic nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_tabs
[   17.011450]  nf_reject_ipv4 nf_nat_rtsp nf_nat_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_conntrack_rtsp nf_conntrack_rtcache nf_conntrack_netlink nf_conntrat
[   17.082567]  nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip_gre gre ifb ip6_udp_tunnel udp_tunnel ip_tunnel autoc
[   17.140899] CPU: 1 PID: 1968 Comm: netifd Not tainted 4.19.82 #0
[   17.146917] Hardware name: Marvell Armada 380/385 (Device Tree)
[   17.152856] PC is at br_vlan_enabled+0x0/0x10
[   17.157224] LR is at dsa_port_vlan_add+0x40/0x88
[   17.161851] pc : [<c06678c0>]    lr : [<c066d100>]    psr: 60000013
[   17.168130] sp : ed5abca0  ip : 00000001  fp : ed5abdb6
[   17.173364] r10: 00000001  r9 : edb93500  r8 : ec1e6800
[   17.178599] r7 : ed5abd04  r6 : ed5abd24  r5 : ee864000  r4 : ee94424c
[   17.185140] r3 : 00000004  r2 : ed5abd04  r1 : 00000000  r0 : 00000000
[   17.191682] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   17.198832] Control: 10c5387d  Table: 2d5c004a  DAC: 00000051
[   17.204590] Process netifd (pid: 1968, stack limit = 0xab1173e4)
[   17.210609] Stack: (0xed5abca0 to 0xed5ac000)
[   17.214976] bca0: ed5abd24 ed5abd04 00000000 00000004 ffffffa1 c0674dbc ffff916c c068efc0
[   17.223173] bcc0: 00000000 ffffffa1 ec1e6800 ed5abd24 ed5abd04 c0674de4 ee937ea0 ec1e6868
[   17.231370] bce0: 00000001 ec7b7840 ec1e6800 ed5abd24 eda5e000 c0674e94 ef3cda40 ffffffff
[   17.239566] bd00: ef08c000 ed5abd04 ed5abd04 c0945001 ec7b7840 ec7b7840 ef1783c0 c066b5bc
[   17.247763] bd20: c0a03db0 ec1e6800 00000001 00000000 00000000 00000000 00010006 00000001
[   17.255959] bd40: 00000000 c0668f64 eeb9c544 00000006 00000001 00000000 eda5e080 00000036
[   17.264156] bd60: ed5abd84 c0148948 ef0f304c ef0f3040 ef0f304c 00000000 00000000 ef1783c0
[   17.272354] bd80: ec7b7840 eda5e000 00000001 00000000 00000006 c066780c ed5abdb6 c0669df0
[   17.280551] bda0: ffffffa1 ee864000 ed5abe23 ed5abe04 00000000 000148ac ef1783c0 ed5abdb6
[   17.288747] bdc0: 00020003 00000008 00001000 01010000 00000000 00000000 c066780c 00020003
[   17.296943] bde0: 00000008 00001000 01010000 00000000 00000000 c066780c ef178418 00000000
[   17.305140] be00: ef1783c0 eda5e000 00000000 00000000 eda5e080 00000036 0003d7a8 c0669f20
[   17.313337] be20: 00ffffe5 edb93000 00000007 00000002 00000000 00000000 00000000 00000000
[   17.321533] be40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c0a03c48
[   17.329730] be60: ec1e6800 ec1e6800 00000000 eda5e000 edb93500 c06595ac 00000000 c012e864
[   17.337928] be80: edb93500 000089a2 edb93000 ed5abef4 c0739a90 ed5abeec 00000000 c05932c0
[   17.346125] bea0: 00e0f13b c0a2b940 ed5abef4 c056bbdc ed5abef4 000000a2 000089a2 c0a2b940
[   17.354323] bec0: ed5abeec c059395c 000089a2 00000051 bed4aba8 c0a2b940 ef0dc300 ed5aa000
[   17.362519] bee0: 00000036 c05506c4 00000000 eed51d01 eea7c410 6c2d7262 00006e61 00000000
[   17.370715] bf00: 00000000 00000013 00000000 00000000 00000000 c0a03c48 bed4aba8 eedff1a0
[   17.378911] bf20: 000089a2 bed4aba8 ef0dc300 c0225788 00000000 eecf97f8 eecf9848 c07ea5a8
[   17.387108] bf40: ed5409c0 00000000 eed51d60 eea7c410 eecf97f8 40000010 ed5409c8 c0214558
[   17.395304] bf60: 00000020 00000000 00000000 ef3cde74 ef0dc300 00000008 000089a2 bed4aba8
[   17.403501] bf80: ef0dc300 ed5aa000 00000036 c022585c 00e20c40 000089a2 b6edb6d8 00000036
[   17.411699] bfa0: c0101204 c0101000 00e20c40 000089a2 00000008 000089a2 bed4aba8 bed4aba0
[   17.419896] bfc0: 00e20c40 000089a2 b6edb6d8 00000036 00e20c78 b6edb6d8 00e20de4 0003d7a8
[   17.428094] bfe0: 0003cd54 bed4ab88 000137c4 b6f5439c 80000010 00000008 00000000 00000000
[   17.436295] [<c06678c0>] (br_vlan_enabled) from [<c066d100>] (dsa_port_vlan_add+0x40/0x88)
[   17.444584] [<c066d100>] (dsa_port_vlan_add) from [<c0674dbc>] (__switchdev_port_obj_add+0x30/0x8c)
[   17.453652] [<c0674dbc>] (__switchdev_port_obj_add) from [<c0674de4>] (__switchdev_port_obj_add+0x58/0x8c)
[   17.463329] [<c0674de4>] (__switchdev_port_obj_add) from [<c0674e94>] (switchdev_port_obj_add_now+0x7c/0xf0)
[   17.473181] [<c0674e94>] (switchdev_port_obj_add_now) from [<c066b5bc>] (br_switchdev_port_vlan_add+0x3c/0x44)
[   17.483207] [<c066b5bc>] (br_switchdev_port_vlan_add) from [<c0668f64>] (__vlan_add+0x50/0x5b4)
[   17.491926] [<c0668f64>] (__vlan_add) from [<c0669df0>] (nbp_vlan_add+0x210/0x244)
[   17.499514] [<c0669df0>] (nbp_vlan_add) from [<c0669f20>] (nbp_vlan_init+0xfc/0x158)
[   17.507278] [<c0669f20>] (nbp_vlan_init) from [<c06595ac>] (br_add_if+0x3c8/0x5ac)
[   17.514868] [<c06595ac>] (br_add_if) from [<c05932c0>] (dev_ifsioc+0x36c/0x390)
[   17.522194] [<c05932c0>] (dev_ifsioc) from [<c059395c>] (dev_ioctl+0x5cc/0x63c)
[   17.529522] [<c059395c>] (dev_ioctl) from [<c05506c4>] (sock_ioctl+0x52c/0x5a8)
[   17.536849] [<c05506c4>] (sock_ioctl) from [<c0225788>] (do_vfs_ioctl+0x828/0x8c8)
[   17.544438] [<c0225788>] (do_vfs_ioctl) from [<c022585c>] (ksys_ioctl+0x34/0x58)
[   17.551851] [<c022585c>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x54)
[   17.559523] Exception stack(0xed5abfa8 to 0xed5abff0)
[   17.564587] bfa0:                   00e20c40 000089a2 00000008 000089a2 bed4aba8 bed4aba0
[   17.572784] bfc0: 00e20c40 000089a2 b6edb6d8 00000036 00e20c78 b6edb6d8 00e20de4 0003d7a8
[   17.580980] bfe0: 0003cd54 bed4ab88 000137c4 b6f5439c
[   17.586044] Code: 18bd8010 e05c0002 13a00001 e8bd8010 (e5d00518) 
[   17.592168] ---[ end trace d312a86e3174f2be ]---
[   17.596800] Kernel panic - not syncing: Fatal exception
[   17.602039] CPU0: stopping
[   17.604755] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G      D           4.19.82 #0
[   17.612167] Hardware name: Marvell Armada 380/385 (Device Tree)
[   17.618108] [<c010ea7c>] (unwind_backtrace) from [<c010a9bc>] (show_stack+0x10/0x14)
[   17.625871] [<c010a9bc>] (show_stack) from [<c0678cd8>] (dump_stack+0x84/0x98)
[   17.633111] [<c0678cd8>] (dump_stack) from [<c010d61c>] (handle_IPI+0xf0/0x19c)
[   17.640442] [<c010d61c>] (handle_IPI) from [<c03ba714>] (gic_handle_irq+0x74/0x78)
[   17.648032] [<c03ba714>] (gic_handle_irq) from [<c0101a0c>] (__irq_svc+0x6c/0x90)
[   17.655529] Exception stack(0xc0a01f30 to 0xc0a01f78)
[   17.660591] 1f20:                                     00000000 0004498c ef6d7304 c0114480
[   17.668788] 1f40: c0a00000 c0a03c6c 00000000 c0a03cac c0944500 00000000 00000000 c0a01f88
[   17.676984] 1f60: c0a0ecc0 c0a01f80 c01082f8 c01082fc 60000013 ffffffff
[   17.683617] [<c0101a0c>] (__irq_svc) from [<c01082fc>] (arch_cpu_idle+0x34/0x38)
[   17.691036] [<c01082fc>] (arch_cpu_idle) from [<c014c598>] (do_idle+0xd8/0x1b4)
[   17.698363] [<c014c598>] (do_idle) from [<c014c8d0>] (cpu_startup_entry+0x18/0x1c)
[   17.705952] [<c014c8d0>] (cpu_startup_entry) from [<c0900df8>] (start_kernel+0x4f4/0x504)
[   17.714149] Rebooting in 3 seconds..

finally I found a configuration that does not put the router in an endless reboot loop but that nevertheless crashes the kernel in the same way when issuing the reboot command:

config interface 'iptv'
        option proto 'none'
        option type 'bridge'
        option ifname 'eth2 eth2.12 lan4 lan4.12'

The above configuration will not crash the kernel on boot, and the iptv interface will be up. but when issuing the reboot command this happens:

root@gateway:/# reboot
root@gateway:/# [  818.621237] br-iptv: port 1(eth2) entered disabled state
[  818.652955] device eth2.12 left promiscuous mode
[  818.657586] device eth2 left promiscuous mode
[  818.662007] br-iptv: port 2(eth2.12) entered disabled state
[  818.704719] br-iptv: port 3(lan4) entered disabled state
[  818.744413] device lan4.12 left promiscuous mode
[  818.749044] device lan4 left promiscuous mode
[  818.753517] br-iptv: port 4(lan4.12) entered disabled state
[  818.759119] Unable to handle kernel NULL pointer dereference at virtual address 00000518
[  818.767236] pgd = 5685c1a5
[  818.769947] [00000518] *pgd=2d74d831, *pte=00000000, *ppte=00000000
[  818.776239] Internal error: Oops: 17 [#1] SMP ARM
[  818.780951] Modules linked in: cifsd ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath pptp pppox ppp_mppe ppp_generic nf_flow_table_ipv6 nf_flow_table_ipv4 nf_fl4
[  818.852080]  nf_tables nf_reject_ipv4 nf_nat_rtsp nf_nat_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_conntrack_rtsp nf_conntrack_rtcache nf_conntrack_netlink t
[  818.922931]  nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip_gre gre ifb ip6_udp_tunnel udp_tunnel ip_tunnel auto]
[  818.983872] CPU: 0 PID: 1975 Comm: netifd Not tainted 4.19.82 #0
[  818.989890] Hardware name: Marvell Armada 380/385 (Device Tree)
[  818.995829] PC is at br_vlan_enabled+0x0/0x10
[  819.000195] LR is at dsa_port_vlan_del+0x48/0x90
[  819.004821] pc : [<c066a284>]    lr : [<c066fb48>]    psr: 60000013
[  819.011101] sp : ed627d60  ip : c0a2d60c  fp : 00000018
[  819.016337] r10: 00000036  r9 : ed4f5380  r8 : eda63500
[  819.021572] r7 : edbb4800  r6 : ed627dac  r5 : ef369800  r4 : eeba764c
[  819.028113] r3 : 00000004  r2 : 00000000  r1 : ed627dac  r0 : 00000000
[  819.034654] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  819.041804] Control: 10c5387d  Table: 2d7b804a  DAC: 00000051
[  819.047561] Process netifd (pid: 1975, stack limit = 0x1b8c3f18)
[  819.053580] Stack: (0xed627d60 to 0xed628000)
[  819.057947] 7d60: ed627dac 00000000 00000000 00000004 ffffffa1 c0678988 00000000 ed627d84
[  819.066144] 7d80: ffffffa1 edbb4800 ed627dac c06789b0 ed627d90 edbb4868 00000001 eda9b880
[  819.074341] 7da0: ed0933c0 c066dfb8 00000000 edbb4800 00000001 00000000 00000000 00000000
[  819.082538] 7dc0: 00010000 00000001 00000000 c066ab54 00000000 edb64c00 00000000 00000001
[  819.090735] 7de0: 00000000 c0a2b980 c0a67a78 00000001 eb3dc000 00000001 edb64c00 edbb4800
[  819.098931] 7e00: 00480020 c0a2b980 edb64c00 00000000 00000018 c05b0ce4 00480020 00000000
[  819.107128] 7e20: 00000000 edbb4800 00480020 ed093448 ed093470 eda63500 eda63500 edbb4800
[  819.115325] 7e40: 00000000 c066adf0 ed747800 ed0933c0 eda63500 c066d12c ed627ef4 eda63500
[  819.123522] 7e60: edbb4800 ed747800 eda63500 c065bbc4 eda63500 eda63000 ed627ef4 c0739c28
[  819.131719] 7e80: ed627eec 00000000 00000036 c065c53c 000089a3 eda63000 ed627ef4 c05947cc
[  819.139916] 7ea0: 00000000 ed627ef4 000000a3 000089a3 ed627ef4 000000a3 000089a3 c0a2b980
[  819.148113] 7ec0: ed627eec c0594e68 000089a3 00000051 be956c30 c0a2b980 ed411180 ed626000
[  819.156309] 7ee0: 00000036 c0551c24 ef6d9040 ee91a501 ee91a540 692d7262 00767470 00000000
[  819.164506] 7f00: 00000000 00000013 00000000 00000000 00000000 c0a03c48 be956c30 eece5360
[  819.172703] 7f20: 000089a3 be956c30 ed411180 c0225788 eb3e8018 ef6d9000 ee954540 00000000
[  819.180900] 7f40: ee91a4c0 ee993180 c0701b6c ffffe000 ed627f8c c068f5f8 ed627f74 2ed94000
[  819.189097] 7f60: c0944b90 a0000193 c0944b90 ed626000 ed411180 00000008 000089a3 be956c30
[  819.197294] 7f80: ed411180 ed626000 00000036 c022585c 00660860 000089a3 b6eb8ca8 00000036
[  819.205490] 7fa0: c0101204 c0101000 00660860 000089a3 00000008 000089a3 be956c30 be956c28
[  819.213687] 7fc0: 00660860 000089a3 b6eb8ca8 00000036 be956cf4 00000018 0063f040 00000018
[  819.221884] 7fe0: 0003cd54 be956c10 000137c4 b6f0339c 60000010 00000008 00000000 00000000
[  819.230085] [<c066a284>] (br_vlan_enabled) from [<c066fb48>] (dsa_port_vlan_del+0x48/0x90)
[  819.238375] [<c066fb48>] (dsa_port_vlan_del) from [<c0678988>] (switchdev_port_obj_del_now+0x2c/0x84)
[  819.247618] [<c0678988>] (switchdev_port_obj_del_now) from [<c06789b0>] (switchdev_port_obj_del_now+0x54/0x84)
[  819.257643] [<c06789b0>] (switchdev_port_obj_del_now) from [<c066dfb8>] (br_switchdev_port_vlan_del+0x3c/0x44)
[  819.267670] [<c066dfb8>] (br_switchdev_port_vlan_del) from [<c066ab54>] (__vlan_del+0x90/0x304)
[  819.276390] [<c066ab54>] (__vlan_del) from [<c066adf0>] (__vlan_flush+0x28/0x44)
[  819.283804] [<c066adf0>] (__vlan_flush) from [<c066d12c>] (nbp_vlan_flush+0x60/0x7c)
[  819.291568] [<c066d12c>] (nbp_vlan_flush) from [<c065bbc4>] (del_nbp+0x154/0x260)
[  819.299069] [<c065bbc4>] (del_nbp) from [<c065c53c>] (br_del_if+0x30/0xdc)
[  819.305963] [<c065c53c>] (br_del_if) from [<c05947cc>] (dev_ifsioc+0x36c/0x390)
[  819.313290] [<c05947cc>] (dev_ifsioc) from [<c0594e68>] (dev_ioctl+0x5cc/0x63c)
[  819.320618] [<c0594e68>] (dev_ioctl) from [<c0551c24>] (sock_ioctl+0x52c/0x5a8)
[  819.327945] [<c0551c24>] (sock_ioctl) from [<c0225788>] (do_vfs_ioctl+0x828/0x8c8)
[  819.335533] [<c0225788>] (do_vfs_ioctl) from [<c022585c>] (ksys_ioctl+0x34/0x58)
[  819.342946] [<c022585c>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x54)
[  819.350618] Exception stack(0xed627fa8 to 0xed627ff0)
[  819.355681] 7fa0:                   00660860 000089a3 00000008 000089a3 be956c30 be956c28
[  819.363878] 7fc0: 00660860 000089a3 b6eb8ca8 00000036 be956cf4 00000018 0063f040 00000018
[  819.372074] 7fe0: 0003cd54 be956c10 000137c4 b6f0339c
[  819.377138] Code: 18bd8010 e05c0002 13a00001 e8bd8010 (e5d00518) 
[  819.383264] ---[ end trace 6cfc8f01d47fa91b ]---
[  819.387891] Kernel panic - not syncing: Fatal exception
[  819.393130] CPU1: stopping
[  819.395844] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D           4.19.82 #0
[  819.403256] Hardware name: Marvell Armada 380/385 (Device Tree)
[  819.409195] [<c010ea7c>] (unwind_backtrace) from [<c010a9bc>] (show_stack+0x10/0x14)
[  819.416959] [<c010a9bc>] (show_stack) from [<c067c6d8>] (dump_stack+0x84/0x98)
[  819.424199] [<c067c6d8>] (dump_stack) from [<c010d61c>] (handle_IPI+0xf0/0x19c)
[  819.431530] [<c010d61c>] (handle_IPI) from [<c03ba714>] (gic_handle_irq+0x74/0x78)
[  819.439119] [<c03ba714>] (gic_handle_irq) from [<c0101a0c>] (__irq_svc+0x6c/0x90)
[  819.446618] Exception stack(0xef091f60 to 0xef091fa8)
[  819.451682] 1f60: 00000000 008028b0 ef6e2304 c0114480 ef090000 c0a03c6c 00000001 c0a03cac
[  819.459879] 1f80: c0944500 00000000 00000000 ef091fb8 c0a0ed00 ef091fb0 c01082f8 c01082fc
[  819.468074] 1fa0: 60000013 ffffffff
[  819.471573] [<c0101a0c>] (__irq_svc) from [<c01082fc>] (arch_cpu_idle+0x34/0x38)
[  819.478991] [<c01082fc>] (arch_cpu_idle) from [<c014c598>] (do_idle+0xd8/0x1b4)
[  819.486319] [<c014c598>] (do_idle) from [<c014c8d0>] (cpu_startup_entry+0x18/0x1c)
[  819.493907] [<c014c8d0>] (cpu_startup_entry) from [<001023ac>] (0x1023ac)
[  819.500711] Rebooting in 3 seconds..

finally I have tried with another port ( lan3 ) and it is the same thing.

for instance:

config interface 'iptv'
        option proto 'none'
        option type 'bridge'
        option ifname 'eth2.12 lan3.12'

results in the following panic on boot:

[   16.893737] mv88e6085 f1072004.mdio-mii:10 lan3: configuring for phy/gmii link mode
[   16.901473] IPv6: ADDRCONF(NETDEV_UP): lan3: link is not ready
[   16.908715] br-iptv: port 2(lan3.12) entered blocking state
[   16.914350] br-iptv: port 2(lan3.12) entered disabled state
[   16.920120] device lan3.12 entered promiscuous mode
[   16.925097] device lan3 entered promiscuous mode
[   16.929731] device eth1 entered promiscuous mode
[   16.936690] Unable to handle kernel NULL pointer dereference at virtual address 00000518
[   16.944816] pgd = c664e7e5
[   16.947529] [00000518] *pgd=2d1bf831, *pte=00000000, *ppte=00000000
[   16.953830] Internal error: Oops: 17 [#1] SMP ARM
[   16.958543] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath pptp pppox ppp_mppe ppp_generic nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_tabs
[   17.030024]  nf_reject_ipv4 nf_nat_rtsp nf_nat_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_conntrack_rtsp nf_conntrack_rtcache nf_conntrack_netlink nf_conntrak
[   17.100876]  nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip_gre gre ifb ip6_udp_tunnel udp_tunnel ip_tunnel autofs4 nls_utc
[   17.158945] CPU: 1 PID: 1975 Comm: netifd Not tainted 4.19.82 #0
[   17.164964] Hardware name: Marvell Armada 380/385 (Device Tree)
[   17.170904] PC is at br_vlan_enabled+0x0/0x10
[   17.175270] LR is at dsa_port_vlan_add+0x40/0x88
[   17.179897] pc : [<c066a284>]    lr : [<c066fab8>]    psr: 60000013
[   17.186177] sp : ed615ca0  ip : 00000001  fp : ed615db6
[   17.191411] r10: 00000001  r9 : edbce500  r8 : ec1a2000
[   17.196646] r7 : ed615d04  r6 : ed615d24  r5 : ef3da000  r4 : ef32b1dc
[   17.203186] r3 : 00000003  r2 : ed615d04  r1 : 00000000  r0 : 00000000
[   17.209728] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   17.216879] Control: 10c5387d  Table: 2d61004a  DAC: 00000051
[   17.222636] Process netifd (pid: 1975, stack limit = 0xc606eb54)
[   17.228656] Stack: (0xed615ca0 to 0xed616000)
[   17.233023] 5ca0: ed615d24 ed615d04 00000000 00000003 ffffffa1 c06787b8 ef05aa80 ee921580
[   17.241220] 5cc0: 00000000 ffffffa1 ec1a2000 ed615d24 ed615d04 c06787e0 c0945000 ec1a2068
[   17.249418] 5ce0: c0a03db0 eb19db40 ec1a2000 ed615d24 ed4b1000 c0678890 ef05aa00 c013dd3c
[   17.257615] 5d00: ef05aa00 ed615d04 ed615d04 c0945001 eb19db40 eb19db40 ed027d80 c066df74
[   17.265812] 5d20: ed615d64 ec1a2000 00000001 00000000 00000000 00000000 00010006 00000001
[   17.274009] 5d40: 00000000 c066b924 ef05aa04 00000006 00000001 00000000 ed4b1080 00000036
[   17.282205] 5d60: ed615d84 c0148948 ef18404c ef184040 ef18404c 00000000 00000000 ed027d80
[   17.290402] 5d80: eb19db40 ed4b1000 00000001 00000000 00000006 c066a1d0 ed615db6 c066c7a8
[   17.298598] 5da0: ffffffa1 ef3da000 ed615e23 ed615e04 00000000 000182a8 ed027d80 ed615db6
[   17.306796] 5dc0: 00020003 00000008 00001000 01010000 00000000 00000000 c066a1d0 00020003
[   17.314992] 5de0: 00000008 00001000 01010000 00000000 00000000 c066a1d0 ed027dd8 00000000
[   17.323190] 5e00: ed027d80 ed4b1000 00000000 00000000 ed4b1080 00000036 0003d7a8 c066c8d8
[   17.331387] 5e20: 00974080 edbce000 00000007 00000002 00000000 00000000 00000000 00000000
[   17.339583] 5e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c0a03c48
[   17.347779] 5e60: ec1a2000 ec1a2000 00000000 ed4b1000 edbce500 c065c328 00000000 c012e864
[   17.355976] 5e80: edbce500 000089a2 edbce000 ed615ef4 c0739c28 ed615eec 00000000 c05947cc
[   17.364172] 5ea0: 01cc615b c0a2b980 ed615ef4 c056d0e8 ed615ef4 000000a2 000089a2 c0a2b980
[   17.372370] 5ec0: ed615eec c0594e68 000089a2 00000051 bedadba8 c0a2b980 ef0ce840 ed614000
[   17.380566] 5ee0: 00000036 c0551c24 00000000 eed52001 eea71410 692d7262 00767470 00000000
[   17.388763] 5f00: 00000000 00000013 00000000 00000000 00000000 c0a03c48 bedadba8 eee3f360
[   17.396960] 5f20: 000089a2 bedadba8 ef0ce840 c0225788 00000000 eecfe880 eecfe8d0 c07eafec
[   17.405156] 5f40: ed631840 00000000 eed52000 eea71410 eecfe880 40000010 ed631848 c0214558
[   17.413352] 5f60: 00000020 00000000 00000000 ee921934 ef0ce840 00000008 000089a2 bedadba8
[   17.421548] 5f80: ef0ce840 ed614000 00000036 c022585c 01cd75c0 000089a2 b6f38c58 00000036
[   17.429745] 5fa0: c0101204 c0101000 01cd75c0 000089a2 00000008 000089a2 bedadba8 bedadba0
[   17.437941] 5fc0: 01cd75c0 000089a2 b6f38c58 00000036 01cd75f8 b6f38c58 01cd7764 0003d7a8
[   17.446139] 5fe0: 0003cd54 bedadb88 000137c4 b6f8339c 60000010 00000008 00000000 00000000
[   17.454340] [<c066a284>] (br_vlan_enabled) from [<c066fab8>] (dsa_port_vlan_add+0x40/0x88)
[   17.462629] [<c066fab8>] (dsa_port_vlan_add) from [<c06787b8>] (__switchdev_port_obj_add+0x30/0x8c)
[   17.471699] [<c06787b8>] (__switchdev_port_obj_add) from [<c06787e0>] (__switchdev_port_obj_add+0x58/0x8c)
[   17.481377] [<c06787e0>] (__switchdev_port_obj_add) from [<c0678890>] (switchdev_port_obj_add_now+0x7c/0xf0)
[   17.491228] [<c0678890>] (switchdev_port_obj_add_now) from [<c066df74>] (br_switchdev_port_vlan_add+0x3c/0x44)
[   17.501254] [<c066df74>] (br_switchdev_port_vlan_add) from [<c066b924>] (__vlan_add+0x50/0x5b4)
[   17.509974] [<c066b924>] (__vlan_add) from [<c066c7a8>] (nbp_vlan_add+0x210/0x244)
[   17.517562] [<c066c7a8>] (nbp_vlan_add) from [<c066c8d8>] (nbp_vlan_init+0xfc/0x158)
[   17.525326] [<c066c8d8>] (nbp_vlan_init) from [<c065c328>] (br_add_if+0x3c8/0x5ac)
[   17.532918] [<c065c328>] (br_add_if) from [<c05947cc>] (dev_ifsioc+0x36c/0x390)
[   17.540245] [<c05947cc>] (dev_ifsioc) from [<c0594e68>] (dev_ioctl+0x5cc/0x63c)
[   17.547572] [<c0594e68>] (dev_ioctl) from [<c0551c24>] (sock_ioctl+0x52c/0x5a8)
[   17.554900] [<c0551c24>] (sock_ioctl) from [<c0225788>] (do_vfs_ioctl+0x828/0x8c8)
[   17.562488] [<c0225788>] (do_vfs_ioctl) from [<c022585c>] (ksys_ioctl+0x34/0x58)
[   17.569902] [<c022585c>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x54)
[   17.577574] Exception stack(0xed615fa8 to 0xed615ff0)
[   17.582637] 5fa0:                   01cd75c0 000089a2 00000008 000089a2 bedadba8 bedadba0
[   17.590835] 5fc0: 01cd75c0 000089a2 b6f38c58 00000036 01cd75f8 b6f38c58 01cd7764 0003d7a8
[   17.599030] 5fe0: 0003cd54 bedadb88 000137c4 b6f8339c
[   17.604095] Code: 18bd8010 e05c0002 13a00001 e8bd8010 (e5d00518) 
[   17.610211] ---[ end trace 9ac484c1994602dc ]---
[   17.614842] Kernel panic - not syncing: Fatal exception
[   17.620079] CPU0: stopping
[   17.622795] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G      D           4.19.82 #0
[   17.630206] Hardware name: Marvell Armada 380/385 (Device Tree)
[   17.636146] [<c010ea7c>] (unwind_backtrace) from [<c010a9bc>] (show_stack+0x10/0x14)
[   17.643910] [<c010a9bc>] (show_stack) from [<c067c6d8>] (dump_stack+0x84/0x98)
[   17.651150] [<c067c6d8>] (dump_stack) from [<c010d61c>] (handle_IPI+0xf0/0x19c)
[   17.658482] [<c010d61c>] (handle_IPI) from [<c03ba714>] (gic_handle_irq+0x74/0x78)
[   17.666071] [<c03ba714>] (gic_handle_irq) from [<c0101a0c>] (__irq_svc+0x6c/0x90)
[   17.673570] Exception stack(0xc0a01f30 to 0xc0a01f78)
[   17.678632] 1f20:                                     00000000 000424d0 ef6d7304 c0114480
[   17.686829] 1f40: c0a00000 c0a03c6c 00000000 c0a03cac c0944500 00000000 00000000 c0a01f88
[   17.695025] 1f60: c0a0ed00 c0a01f80 c01082f8 c01082fc 60000013 ffffffff
[   17.701658] [<c0101a0c>] (__irq_svc) from [<c01082fc>] (arch_cpu_idle+0x34/0x38)
[   17.709076] [<c01082fc>] (arch_cpu_idle) from [<c014c598>] (do_idle+0xd8/0x1b4)
[   17.716403] [<c014c598>] (do_idle) from [<c014c8d0>] (cpu_startup_entry+0x18/0x1c)
[   17.723993] [<c014c8d0>] (cpu_startup_entry) from [<c0900df8>] (start_kernel+0x4f4/0x504)
[   17.732190] Rebooting in 3 seconds..


26.11.20192634Base systemBug ReportVery LowCriticalLuci allows access if root password is cleared and lock...AllUnconfirmed Task Description

Luci doesn’t correctly handle a disabled, empty password for root.
Deleting and disabling the root password makes the luci interface accessible without a password.

Steps to reproduce:
- Delete root password (passwd -d root)
- Lock root password (passwd -l root)
- Try to access Luci

28.11.20192638KernelBug ReportVery LowCriticalNot enough host controller resources for new device sta...AllUnconfirmed Task Description

After connecting the usb hub and two identical e3372h modems, receives the following error:

kern.info kernel: [ 4313.927551] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
kern.info kernel: [ 4313.963934] hub 2-1:1.0: USB hub found
kern.info kernel: [ 4313.968328] hub 2-1:1.0: 4 ports detected
kern.info kernel: [ 4314.107232] usb 1-1: new high-speed USB device number 16 using xhci-mtk
kern.info kernel: [ 4314.309707] hub 1-1:1.0: USB hub found
kern.info kernel: [ 4314.314024] hub 1-1:1.0: 4 ports detected
kern.err kernel: [ 4315.449126] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
kern.info kernel: [ 4323.227134] usb 1-1.1: new high-speed USB device number 19 using xhci-mtk
kern.info kernel: [ 4323.359684] usb-storage 1-1.1:1.0: USB Mass Storage device detected
kern.info kernel: [ 4323.366475] scsi host3: usb-storage 1-1.1:1.0
kern.info kernel: [ 4323.667042] usb 1-1.4: new high-speed USB device number 20 using xhci-mtk
kern.warn kernel: [ 4323.799302] usb 1-1.4: Not enough host controller resources for new device state.
kern.err kernel: [ 4323.806875] usb 1-1.4: can't set config #1, error -12
kern.info kernel: [ 4324.317141] usb 2-1: USB disconnect, device number 2
kern.notice kernel: [ 4324.428273] scsi 3:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
kern.notice kernel: [ 4324.441876] scsi 3:0:0:1: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
kern.notice kernel: [ 4324.469348] sd 3:0:0:1: [sdb] Attached SCSI removable disk
kern.info kernel: [ 4324.667338] usb 2-1: new SuperSpeed USB device number 3 using xhci-mtk
kern.info kernel: [ 4324.703318] hub 2-1:1.0: USB hub found
kern.info kernel: [ 4324.707765] hub 2-1:1.0: 4 ports detected
kern.info kernel: [ 4324.975384] usb 1-1.1: USB disconnect, device number 19
kern.info kernel: [ 4325.377043] usb 1-1.1: new high-speed USB device number 21 using xhci-mtk
kern.warn kernel: [ 4325.508714] usb 1-1.1: Not enough host controller resources for new device state.
kern.err kernel: [ 4325.516294] usb 1-1.1: can't set config #1, error -12
kern.info kernel: [ 4332.655468] usb 1-1.4: USB disconnect, device number 20
kern.info kernel: [ 4333.567032] usb 1-1.4: new high-speed USB device number 22 using xhci-mtk
kern.info kernel: [ 4333.699727] usb-storage 1-1.4:1.0: USB Mass Storage device detected
kern.info kernel: [ 4333.706535] scsi host3: usb-storage 1-1.4:1.0
kern.info kernel: [ 4334.703592] usb 1-1.4: USB disconnect, device number 22
kern.info kernel: [ 4335.106995] usb 1-1.4: new high-speed USB device number 23 using xhci-mtk
kern.warn kernel: [ 4335.238608] usb 1-1.4: Not enough host controller resources for new device state.
kern.err kernel: [ 4335.246174] usb 1-1.4: can't set config #1, error -12
kern.info kernel: [ 4335.254656] usb 1-1.1: USB disconnect, device number 21
kern.info kernel: [ 4335.556999] usb 1-1.1: new high-speed USB device number 24 using xhci-mtk
kern.warn kernel: [ 4335.689333] usb 1-1.1: Not enough host controller resources for new device state.
kern.err kernel: [ 4335.697209] usb 1-1.1: can't set config #1, error -12
kern.info kernel: [ 4338.571247] usb 2-1: USB disconnect, device number 3
kern.info kernel: [ 4338.937429] usb 2-1: new SuperSpeed USB device number 4 using xhci-mtk
kern.info kernel: [ 4338.973068] hub 2-1:1.0: USB hub found
kern.info kernel: [ 4338.977396] hub 2-1:1.0: 4 ports detected
28.11.20192639KernelBug ReportVery LowCriticalkernel oops when visit a invalid virtual addressTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

 youku-l2

- Software versions of OpenWrt/LEDE release, packages, etc.

 snapshot. at 
 Linux OpenWrt 4.14.155 #0 SMP Sun Nov 24 22:17:34 2019 mips GNU/Linux

- Steps to reproduce

 I don't know. but this problem occurs, from the device reboot, after several hours or one or two days, the oops occurs. 
 
BusyBox v1.31.1 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r11591-c5497ebb1c
 -----------------------------------------------------
root@OpenWrt:~# cat /sys/kernel/debug/crashlog
Time: 1574977671.59411
Modules:        pppoe@8ee64000+22f0     ppp_async@8efa2000+1bc0 pppox@8e8de000+58a       ppp_generic@8e9f8000+5c82        nf_conntrack_ipv6@8f094000+15c0 mt76x2e@8f0ec000+2910    mt76x2_common@8f0f0000+2d88      mt76x02_lib@8f150000+a421       mt7603e@8ef30000+96cc    mt76@8e978000+7f5d       mac80211@8e900000+77c89 iptable_nat@8eff6000+3b0                 ipt_REJECT@8f023000+410  ipt_MASQUERADE@8e80b000+2f0     cfg80211@8ef40000+3f4f9          xt_time@8f0ba000+730     xt_tcpudp@8f0b7000+750  xt_state@8f0b4000+310   xt_nat@8f0b0000+650       xt_multiport@8f0a7000+550       xt_mark@8f0a4000+2f0    xt_mac@8f0a0000+2b0      xt_limit@8f09e000+4f0    xt_conntrack@8f07e000+910       xt_comment@8f067000+230          xt_TCPMSS@8e8d7000+b30   xt_REDIRECT@8f09c000+310        xt_LOG@8e8fb000+350              xt_FLOWOFFLOAD@8e8f8000+c30      xt_CT@8e8f5000+ab0      slhc@8f090000+14bb               nf_reject_ipv4@8ef96000+903      nf_nat_redirect@8ef9a000+63b    nf_nat_masquerade_ipv4@8ef9d000+71c       nf_conntrack_ipv4@8f064000+1450 nf_nat_ipv4@8e8b0000+1031                nf_nat@8f080000+3a7c     nf_log_ipv4@8efd5000+df0        nf_flow_table_hw@8e8e5000+920    nf_flow_table@8efb8000+367f      nf_defrag_ipv6@8efb2000+147e    nf_defrag_ipv4@8e8e8000+4b6       nf_conntrack_rtcache@8e8ea000+b10       nf_conntrack@8ef80000+11bca              iptable_mangle@8e8d8000+470      iptable_filter@8f7ed000+3d0     ip_tables@8e8d4000+2bdd  crc_ccitt@8e80e000+42b   compat@8e8d0000+1de4    ledtrig_usbport@8f7e4000+b00             nf_log_ipv6@8e8c6000+10d0        nf_log_common@8f001000+baf      ip6table_mangle@8f76b000+570      ip6table_filter@8f75e000+3d0    ip6_tables@8e8c0000+2ae1        ip6t_REJECT@8efc7000+450  x_tables@8efdc000+38af  nf_reject_ipv6@8eff7000+ac8     leds_gpio@8f794000+bb0   xhci_plat_hcd@8f790000+1650      xhci_pci@8f72e000+c30   xhci_mtk@8f7f2000+1490           xhci_hcd@8f7a0000+16e09  gpio_button_hotplug@8f78e000+1ad0       usbcore@8f7c0000+21591   nls_base@8f734000+1570   usb_common@8ffe1000+a37
<6>[    2.021026] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
<6>[    2.027787] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
<6>[    2.034511] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
<6>[    2.041702] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
<6>[    2.048423] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
<6>[    2.055183] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
<6>[    2.061894] pci 0000:00:00.0: PCI bridge to [bus 01]
<6>[    2.066846] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
<6>[    2.073574] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
<6>[    2.080852] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
<6>[    2.087987] pci 0000:00:01.0: PCI bridge to [bus 02]
<6>[    2.092933] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
<6>[    2.099653] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff pref]
<6>[    2.108218] clocksource: Switched to clocksource GIC
<6>[    2.114767] NET: Registered protocol family 2
<6>[    2.119945] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    2.126839] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
<6>[    2.133270] TCP: Hash tables configured (established 2048 bind 2048)
<6>[    2.139690] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    2.145452] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    2.151946] NET: Registered protocol family 1
<7>[    2.156268] PCI: CLS 0 bytes, default 32
<6>[    2.388167] 4 CPUs re-calibrate udelay(lpj = 2924544)
<4>[    2.394747] Crashlog allocated RAM at address 0x3f00000
<6>[    2.400168] workingset: timestamp_bits=14 max_order=16 bucket_order=2
<6>[    2.414833] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    2.420603] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<5>[    2.431036] random: fast init done
<6>[    2.434139] io scheduler noop registered
<6>[    2.438310] io scheduler deadline registered (default)
<6>[    2.444494] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
<6>[    2.454582] console [ttyS0] disabled
<6>[    2.458130] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
<6>[    2.467147] console [ttyS0] enabled
<6>[    2.474027] bootconsole [early0] disabled
<4>[    2.484276] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
<6>[    2.491904] spi-mt7621 1e000b00.spi: sys_freq: 220000000
<6>[    2.498139] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
<5>[    2.503281] 4 fixed-partitions partitions found on MTD device spi0.0
<5>[    2.509651] Creating 4 MTD partitions on "spi0.0":
<5>[    2.514435] 0x000000000000-0x000000030000 : "u-boot"
<5>[    2.520678] 0x000000030000-0x000000040000 : "u-boot-env"
<5>[    2.527090] 0x000000040000-0x000000050000 : "factory"
<5>[    2.533241] 0x000000050000-0x000001000000 : "firmware"
<5>[    2.539665] 2 uimage-fw partitions found on MTD device firmware
<5>[    2.545569] Creating 2 MTD partitions on "firmware":
<5>[    2.550579] 0x000000000000-0x0000001ffad5 : "kernel"
<5>[    2.556604] 0x0000001ffad5-0x000000fb0000 : "rootfs"
<5>[    2.562721] mtd: device 5 (rootfs) set to be root filesystem
<5>[    2.568570] 1 squashfs-split partitions found on MTD device rootfs
<5>[    2.574736] 0x000000430000-0x000000fb0000 : "rootfs_data"
<6>[    2.582044] libphy: Fixed MDIO Bus: probed
<6>[    2.650253] libphy: mdio: probed
<6>[    4.054512] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
<6>[    4.061238] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 22
<6>[    4.072283] NET: Registered protocol family 10
<6>[    4.078487] Segment Routing with IPv6
<6>[    4.082230] NET: Registered protocol family 17
<6>[    4.086730] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
<6>[    4.099677] 8021q: 802.1Q VLAN Support v1.8
<6>[    4.106481] hctosys: unable to open rtc device (rtc0)
<6>[    4.119110] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
<6>[    4.130502] Freeing unused kernel memory: 1260K
<4>[    4.135030] This architecture does not have kernel memory protection.
<14>[    4.872669] init: Console is alive
<14>[    4.876317] init: - watchdog -
<14>[    5.882569] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<6>[    6.029362] usbcore: registered new interface driver usbfs
<6>[    6.034945] usbcore: registered new interface driver hub
<6>[    6.040467] usbcore: registered new device driver usb
<4>[    6.054247] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
<4>[    6.062995] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
<6>[    6.071955] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
<6>[    6.077277] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
<6>[    6.088345] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
<6>[    6.097519] xhci-mtk 1e1c0000.xhci: irq 21, io mem 0x1e1c0000
<6>[    6.104357] hub 1-0:1.0: USB hub found
<6>[    6.108234] hub 1-0:1.0: 2 ports detected
<6>[    6.112875] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
<6>[    6.118241] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
<6>[    6.125705] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0  SuperSpeed
<6>[    6.132341] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[    6.141347] hub 2-0:1.0: USB hub found
<6>[    6.145168] hub 2-0:1.0: 1 port detected
<14>[    6.154150] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[    6.178545] init: - preinit -
<6>[    7.177582] mtk_soc_eth 1e100000.ethernet: PPE started
<5>[    7.252645] random: procd: uninitialized urandom read (4 bytes read)
<5>[   10.531863] jffs2: notice: (482) jffs2_build_xattr_subsystem: complete building xattr subsystem, 7 of xdatum (3 unchecked, 4 orphan) and 43 of xref (4 dead, 0 orphan) found.
<14>[   10.553355] mount_root: switching to jffs2 overlay
<4>[   10.576616] overlayfs: upper fs does not support tmpfile.
<12>[   10.592158] urandom-seed: Seeding with /etc/urandom.seed
<6>[   10.695023] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
<14>[   10.716965] procd: - early -
<14>[   10.719988] procd: - watchdog -
<14>[   11.368370] procd: - watchdog -
<14>[   11.371872] procd: - ubus -
<5>[   11.397531] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[   11.430071] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[   11.436790] random: ubusd: uninitialized urandom read (4 bytes read)
<14>[   11.444092] procd: - init -
<14>[   12.071546] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[   12.083773] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[   12.097818] Loading modules backported from Linux version v5.4-rc8-0-gaf42d3466bdc
<6>[   12.105474] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51
<6>[   12.114103] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[   12.126620] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
<6>[   12.177575] xt_time: kernel timezone is -0000
<4>[   12.240330] bus=0x1, slot = 0x0, irq=0xff
<6>[   12.244587] mt7603e 0000:01:00.0: ASIC revision: 76030010
<14>[   12.248691] urngd: v1.0.1 started.
<5>[   12.400941] random: crng init done
<5>[   12.404350] random: 6 urandom warning(s) missed due to ratelimiting
<6>[   13.279501] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
<6>[   13.285073] mt7603e 0000:01:00.0: Build Time: 20160107100755
<6>[   13.328226] mt7603e 0000:01:00.0: firmware init done
<7>[   13.500398] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<4>[   13.513858] bus=0x2, slot = 0x1, irq=0xff
<6>[   13.518248] mt76x2e 0000:02:00.0: ASIC revision: 76120044
<6>[   14.269373] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
<6>[   14.279042] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
<6>[   14.284520] mt76x2e 0000:02:00.0: Build: 1
<6>[   14.288650] mt76x2e 0000:02:00.0: Build Time: 201507311614____
<6>[   14.308213] mt76x2e 0000:02:00.0: Firmware running!
<7>[   14.315892] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
<6>[   14.323384] PPP generic driver version 2.4.2
<6>[   14.329343] NET: Registered protocol family 24
<14>[   14.337138] kmodloader: done loading kernel modules from /etc/modules.d/*
<6>[   18.442839] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
<6>[   20.695431] mtk_soc_eth 1e100000.ethernet: PPE started
<6>[   20.705271] br-lan: port 1(eth0.1) entered blocking state
<6>[   20.710862] br-lan: port 1(eth0.1) entered disabled state
<6>[   20.716991] device eth0.1 entered promiscuous mode
<6>[   20.721938] device eth0 entered promiscuous mode
<6>[   20.731335] br-lan: port 1(eth0.1) entered blocking state
<6>[   20.736800] br-lan: port 1(eth0.1) entered forwarding state
<6>[   20.743072] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
<6>[   21.504643] pppoe-wan: renamed from ppp0
<6>[   21.759034] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
<6>[   25.485868] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
<6>[   25.499062] br-lan: port 2(wlan1) entered blocking state
<6>[   25.504430] br-lan: port 2(wlan1) entered disabled state
<6>[   25.510505] device wlan1 entered promiscuous mode
<6>[   25.555437] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[   25.566445] br-lan: port 3(wlan0) entered blocking state
<6>[   25.571826] br-lan: port 3(wlan0) entered disabled state
<6>[   25.577853] device wlan0 entered promiscuous mode
<6>[   25.583186] br-lan: port 3(wlan0) entered blocking state
<6>[   25.588566] br-lan: port 3(wlan0) entered forwarding state
<6>[   26.063776] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[   26.077173] br-lan: port 4(wlan0-1) entered blocking state
<6>[   26.083073] br-lan: port 4(wlan0-1) entered disabled state
<6>[   26.089464] device wlan0-1 entered promiscuous mode
<6>[   26.099208] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
<6>[   26.105510] br-lan: port 4(wlan0-1) entered blocking state
<6>[   26.111095] br-lan: port 4(wlan0-1) entered forwarding state
<6>[   26.662628] br-lan: port 4(wlan0-1) entered disabled state
<6>[   26.669241] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
<6>[   26.676001] br-lan: port 2(wlan1) entered blocking state
<6>[   26.681401] br-lan: port 2(wlan1) entered forwarding state
<6>[   26.695246] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
<6>[   26.703001] br-lan: port 4(wlan0-1) entered blocking state
<6>[   26.708650] br-lan: port 4(wlan0-1) entered forwarding state
<6>[   26.723751] br-lan: port 5(wlan0-2) entered blocking state
<6>[   26.729417] br-lan: port 5(wlan0-2) entered disabled state
<6>[   26.735733] device wlan0-2 entered promiscuous mode
<6>[   26.742641] IPv6: ADDRCONF(NETDEV_UP): wlan0-2: link is not ready
<6>[   26.748867] br-lan: port 5(wlan0-2) entered blocking state
<6>[   26.754465] br-lan: port 5(wlan0-2) entered forwarding state
<6>[   27.177925] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-2: link becomes ready
<1>[159983.016519] CPU 1 Unable to handle kernel paging request at virtual address 07406000, epc == 801317c0, ra == 80131674
<4>[159983.027206] Oops[#1]:
<4>[159983.029559] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.155 #0
<4>[159983.035718] task: 8fc3c100 task.stack: 8fc5c000
<4>[159983.040314] $ 0   : 00000000 00000001 00000000 81266650
<4>[159983.045615] $ 4   : 806061fc 00000001 00000001 07406000
<4>[159983.050915] $ 8   : 000289b4 000289b3 00000000 00000001
<4>[159983.056211] $12   : 00000002 00000000 c0222b40 00009180
<4>[159983.061507] $16   : 8fc02a00 01090220 807a0000 8ea80000
<4>[159983.066803] $20   : 00000018 00000800 00000000 01080020
<4>[159983.072101] $24   : 3b9aca00 80008e2c
<4>[159983.077399] $28   : 8fc5c000 8fc0b9c8 00000000 80131674
<4>[159983.082697] Hi    : 00002665
<4>[159983.085647] Lo    : 94af5487
<4>[159983.088611] epc   : 801317c0 __kmalloc_track_caller+0x20c/0x290
<4>[159983.094591] ra    : 80131674 __kmalloc_track_caller+0xc0/0x290
<4>[159983.100478] Status: 11007c03     KERNEL EXL IE
<4>[159983.104737] Cause : 40800008 (ExcCode 02)
<4>[159983.108810] BadVA : 07406000
<4>[159983.111762] PrId  : 0001992f (MIPS 1004Kc)
<4>[159983.115920] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
<4>[159983.186680] Process swapper/1 (pid: 0, threadinfo=8fc5c000, task=8fc3c100, tls=00000000)
<4>[159983.194820] Stack : 80666658 8eec1e00 00000000 00000000 0000006c 8ee726c0 00000000 01080020
<4>[159983.203242]         8038772c 80383e60 00000000 00000000 284162c7 b901a8c0 fb0000e0 8ee726c0
<4>[159983.211663]         8ee726c0 00000000 00000740 00000018 8ef3cc00 8038772c 00000000 80600000
<4>[159983.220082]         00000004 00000000 00000000 8ef3cc00 8ee726c0 8ef77ab2 8ee726c0 00000018
<4>[159983.228504]         8ef3cc00 00000000 00000000 8e932214 000000e1 806061fc 8fc0bb44 8fc0bb4c
<4>[159983.236932]         ...
<4>[159983.239455] Call Trace:
<4>[159983.241987] [<801317c0>] __kmalloc_track_caller+0x20c/0x290
<4>[159983.247645] [<80383e60>] __kmalloc_reserve.isra.45+0x44/0xac
<4>[159983.253388] [<8038772c>] pskb_expand_head+0x8c/0x328
<4>[159983.258565] [<8e932214>] ieee80211_skb_resize+0x19c/0xde0 [mac80211]
<4>[159983.265045] [<8e932b44>] ieee80211_skb_resize+0xacc/0xde0 [mac80211]
<4>[159983.271514] [<8f080e1c>] nf_xfrm_me_harder+0x830/0xa90 [nf_nat]
<4>[159983.277497] Code: 00000000  8e020014  00e23821 <8ce20000> 10000012  cc400000  10400005  00000000  8e060010
<4>[159983.287311]
<4>[159983.289013] ---[ end trace de892621f972e570 ]---

===================================
Time: 1574977671.67638
root@OpenWrt:~#
 
01.12.20192645Base systemBug ReportVery LowCritical18.06.3 - Broken compatibility with flash on bcm6538 ba...openwrt-18.06Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: Pirelli A226M
- Software versions of OpenWrt/LEDE release: 18.06.3
- Steps to reproduce: just flash a 18.06.3 version or greater and verify the device won’t boot, hanging when it gets to mount local flash. 18.06.1 is working, never tried 18.06.2.

[    1.065798] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[    1.073562] Please append a correct "root=" boot option; here are the available partitions:
[    1.082174] 1f00             128 mtdblock0 [    1.086283]  (driver?)
[    1.088718] 1f01           16128 mtdblock1 [    1.092823]  (driver?)
[    1.095210] 1f02             128 mtdblock2 [    1.099366]  (driver?)
[    1.101798] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
 


26.12.20192695KernelBug ReportVery LowCriticalKernel panic during boot on Gehua ghl-r-001TrunkNew Task Description

See https://github.com/openwrt/openwrt/pull/2483

without this patch the ghl-r-001 cannot be boot.

reproduct in both 19.7-rc2 and git master.

08.01.20202718Base systemBug ReportVery LowCritical/overlay is empty and nothing can be written thereTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

Only on TPLink Archer C7 v5 (current model).
Other models are OK: A7 (”V5”) (also current), C7 V2, C7 V4 (both earlier)

- Software versions of OpenWrt/LEDE release, packages, etc.

Only Trunk has this problem, and only on C7 v5. rc19.07 does *not* have this problem.

- Steps to reproduce

make menuconfig for target C7 V5
load squashfs-factory version in a C7 V5
boot

...and presto, there’s nothing in /overlay. /rom/overlay is populated. I have found no way to write anything on /overlay. Luci can’t save anything either – not even a password.

There’s nothing weird in my make menuconfig config, unless you count python3-light, bind-dig, ca-certificates, etc. as weird. And the other C7 and C7-like models work fine.

 


Showing tasks 1 - 50 of 1068 Page 1 of 221 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing