OpenWrt/LEDE Project

Welcome to the OpenWrt Project bug reporting and issue tracking system

Problems to be reported here are for the current OpenWrt and legacy LEDE Project’s targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to openwrt-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeveritySummary  descReported InStatus
05.12.20203491PackagesBug ReportVery LowLowumDNS fails to compile with GCC10 possible CVETrunkUnconfirmed Task Description

A warning (treated as error) is emitted from GCC10 when compiling umDNS (object at ‘b’ is out of the bounds). This could also turn into a CVE.

[ 40%] Building C object CMakeFiles/umdns-lib.dir/service.c.o
/home/ByteEnable/temp/openwrt-master/staging_dir/toolchain-arm_cortex-a9+vfpv3-d16_gcc-10.2.0_musl_eabi/bin/arm-openwrt-linux-muslgnueabi-gcc   -Os -pipe  -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98=umdns-2020-10-26-59e4fc98 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -I/home/ByteEnable/temp/openwrt-master/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/usr/include -DNDEBUG   -Os -ggdb -Wall -Werror --std=gnu99 -Wmissing-declarations -o CMakeFiles/umdns-lib.dir/service.c.o -c /home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98/service.c
/home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98/service.c: In function 'service_load_blob':
/home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98/service.c:242:10: error: 'strncpy' offset 6 from the object at 'b' is out of the bounds of referenced subobject 'name' with type 'uint8_t[]' {aka 'unsigned char[]'} at offset 6 [-Werror=array-bounds]
  242 |  s->id = strncpy(d_id, blobmsg_name(b), n);
      |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /home/ByteEnable/temp/openwrt-master/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/usr/include/libubus.h:23,
                 from /home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98/service.c:23:
/home/ByteEnable/temp/openwrt-master/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/usr/include/libubox/blobmsg.h:43:10: note: subobject 'name' declared here
   43 |  uint8_t name[];
      |          ^~~~
cc1: all warnings being treated as errors
make[6]: *** [CMakeFiles/umdns-lib.dir/build.make:121: CMakeFiles/umdns-lib.dir/service.c.o] Error 1
make[6]: Leaving directory '/home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98'
make[5]: *** [CMakeFiles/Makefile2:124: CMakeFiles/umdns-lib.dir/all] Error 2
make[5]: Leaving directory '/home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98'
make[4]: *** [Makefile:149: all] Error 2
make[4]: Leaving directory '/home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98'
make[3]: *** [Makefile:50: /home/ByteEnable/temp/openwrt-master/build_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/umdns-2020-10-26-59e4fc98/.built] Error 2
make[3]: Leaving directory '/home/ByteEnable/temp/openwrt-master/package/network/services/umdns'
time: package/network/services/umdns/compile#0.64#0.16#0.00
    ERROR: package/network/services/umdns failed to build.
make[2]: *** [package/Makefile:114: package/network/services/umdns/compile] Error 1
make[2]: Leaving directory '/home/ByteEnable/temp/openwrt-master'
make[1]: *** [package/Makefile:108: /home/ByteEnable/temp/openwrt-master/staging_dir/target-arm_cortex-a9+vfpv3-d16_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/ByteEnable/temp/openwrt-master'
make: *** [/home/ByteEnable/temp/openwrt-master/include/toplevel.mk:242: world] Error 2
17.11.20214140PackagesBug ReportVery LowMediumumdns does not respect legacy queries (not from port 53...TrunkUnconfirmed Task Description

According to Section 6.7 of the RFC, if the query was sent not from port 5353, the responder MUST respond over unicast and, most importantly, to the same port that the query was sent from.

This is what currently prevents

dig -p 5353 @224.0.0.251 <hostname>

from working, since dig is expecting the response on the random port it sent its query from, but umdns, contrary to the specifiation, always sends to port 5353.

09.12.20203500Base systemBug ReportVery LowLowumbim: problem registering to network with Huawei K5150...TrunkUnconfirmed Task Description

Hi!

The problem is that the card registers to network in a weird way and thus the mbim.sh script stops and doesn’t continue attaching to network, ...

The problem has been detected on a Huawei EchoLife HG556a (version C) but seems a general problem.

Also, the problem was with a ID 12d1:1f16 Huawei Technologies Co., Ltd. K5150 LTE modem but I believe that it can happens on other mbim devices as well.

I believe the problem is more related to the fact that the SIM is from a virtual movile operator which is then using the network from the real operator: Orange, but we didn’t test any other SIMs, so we don’t know if this is more general, if needed we could try to get some other SIMs for testing.

The problem is that when we do the network registration with umbim it gives an error, so it stops there, so we tried to remove that check like this:

— mbim.sh.orig 2020-12-04 15:11:47.000000000 +0100
+++ mbim.sh 2020-12-03 16:30:34.000000000 +0100
@@ -99,11 +99,7 @@

      tid=$((tid + 1))
      echo "mbim[$$]" "Register with network"

- umbim $DBG -n -t $tid -d $device registration || {
- echo “mbim[$$]” “Subscriber registration failed” - proto_notify_error “$interface” NO_REGISTRATION
- return 1
- }
+ umbim $DBG -n -t $tid -d $device registration

      tid=$((tid + 1))
      echo "mbim[$$]" "Attach to network"

So that it would continue no matter how the network registration felt, and it worked giving us this log:

Wed Dec 9 11:41:27 2020 daemon.notice netifd: wwan (1405): wwan[1405] Using proto:wwan device:/dev/cdc-wdm0 iface:wwan0 desc:Huawei K5150 composite
Wed Dec 9 11:41:27 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): mbim[1405] Reading capabilities
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): devicetype: 0002 - removable
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): cellularclass: 0001
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): voiceclass: 0001 - no-voice
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): simclass: 0002
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): dataclass: 8000003F
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): smscaps: 0003
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): controlcaps: 0001
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): maxsessions: 0003
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): deviceid: 860112021925542
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): firmwareinfo: V8.1
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): hardwareinfo: CH1K5150M
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): mbim[1405] Checking pin
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): Pin Unlocked
Wed Dec 9 11:41:28 2020 daemon.notice netifd: wwan (1405): mbim[1405] Checking subscriber
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): readystate: 0001 - initialized
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): simiccid: 8934250220007795837F
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): subscriberid: 214035090779583
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): mbim[1405] Register with network
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): nwerror: 0000 - unknown
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): registerstate: 0004 - roaming
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): registermode: 0001 - automatic
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): availabledataclasses: 0020 - lte
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): currentcellularclass: 0001 - gsm
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): provider_id: 21403
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): provider_name: Orange
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): roamingtext: (null)
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): mbim[1405] Attach to network
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): nwerror: 0000 - unknown
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): packetservicestate: 0002 - attached
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): uplinkspeed: 0
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): downlinkspeed: 0
Wed Dec 9 11:41:29 2020 daemon.notice netifd: wwan (1405): mbim[1405] Connect to network
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): sessionid: 0
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): activationstate: 0001 - activated
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): voicecallstate: 0000 - none
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): nwerror: 0000 - unknown
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): iptype: 0003 - ipv4v6
Wed Dec 9 11:41:30 2020 daemon.notice netifd: wwan (1405): mbim[1405] Connected, starting DHCP

Network connection works ok like this and we can access Inet without any problem.

So... either umbim is not exiting with the right exit code, maybe because of that unknown status it says there, or if the exit code is ok, then we should somehow do farder tests and continue like we did, as the connection is good anyway.

This was also tested using latest available snapshot builds with the same results, we have gone back to stable (these logs are from 19.07.4) as the snapshot build was having trouble with the wifi on this router, but the umbim problem and the solution we applied worked the same on snapshot as it does on stable.

If you need any other info, just ask.

Regards.

21.04.20192248PackagesFeature RequestVery LowLowuhttpd: implement ubus event listener via Server-Sent E...TrunkWaiting on reporter Task Description

Usecase:
As a web developer I would benefit from having the possibility to send events from the server to the browser so the browser can react to it dynamically.

The proposed implementation is the leanest possible.

A SSE (Server-Sent Event) is a simple protocol on top of basic http polling to send messages from the http server to the browser for the purpose of instant notifications.
It comes implemented in all major browsers, including mobile.

If paired with `ubus listen` or `ubus monitor`, a seamless integration with the ubus pipeline could be implemented.

We tried to implement it by adding an option in this line of code but got stuck in our lack of corutine mechanisms and how uhttpd works.

The difference with the call and list options is that this one should be long-lived and progressive, preventing the dreaded polling from the web (also, better us of resources, more elegant implementation, etc).

As an example, a very basic implementation of a SSE server in php:

<?php
header('Content-Type: text/event-stream');
header('Cache-Control: no-cache');

echo "data: \"hello world\"" . PHP_EOL;
echo PHP_EOL;
echo "data: \"goodbye world\"" . PHP_EOL;
echo PHP_EOL;
ob_flush();
flush();

An example of a very basic implementation of a SSE client in HTML:

<html>
	<body></body>
	<script>
	var source = new EventSource("demo_sse.php");
	source.onmessage = function(event) {
		document.getElementById("result").innerHTML += event.data + "<br>";
	}; 
	</script>
</html>
02.06.20203144Base systemBug ReportVery LowLowuhttpd: https redirect should be to a configurable host...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: *all*
- Software versions of OpenWrt/LEDE release, packages, etc.: *master ~2 weeks old*
- Steps to reproduce: *see below*

Install luci-ssl. It will configure uhttpd to listen on port 443 and redirect http to https. In particular, it will add to /etc/config/uhttpd:

 option redirect_https '1'

However, the semantics of this redirect are wrong if a non-self-signed certificate is used.

In particular, it is now a boolean option, and always gets the redirect target from the Host: header. That is, it redirects http://192.168.1.1/ to https://192.168.1.1/, and, assuming that openwrt.mydomain.ru resolves to 192.168.1.1, it will also redirect http://openwrt.mydomain.ru/ to https://openwrt.mydomain.ru/.

What I want is a string option that specifies the domain for redirects. I.e., I should be able to set something like this:

 option redirect_https_domain 'openwrt.mydomain.ru'

and then both http://192.168.1.1/ and http://openwrt.mydomain.ru/ and http://anything.that.resolves.to.192.168.1.1.com/ should redirect to https://openwrt.mydomain.ru/.

04.11.20214121Base systemBug ReportVery LowLowuhttpd: checked and used certificate are different in u...TrunkUnconfirmed Task Description

uhttpd init script checks different certificate files then it finally uses in some situations. This causes uhttpd fail to start.

In the init script, there are lines

config_get UHTTPD_KEY  "$cfg" key  /etc/uhttpd.key
config_get UHTTPD_CERT "$cfg" cert /etc/uhttpd.crt

Some checks are performed on UHTTPD_KEY and UHTTPD_CERT and later, there is

append_arg "$cfg" cert "-C"
append_arg "$cfg" key  "-K"

This can cause problem if key or cert option is missing. In the first place, defalt value is used and in the second place, empty string is used.

Deleting key and cert option and restarting uhttpd will pass all checks, new certificate and key will be generated in default location and later, empty certificate and key paths are passed to uhttpd which will fail.

I would like to send PR to fix this but I would like to ask for the best solution. Naive approach would be to just do

append_arg "$cfg" cert "-C" "$UHTTPD_CERT"
append_arg "$cfg" key  "-K" "$UHTTPD_KEY"

So it will fallback to already resolved values and at least don’t fail, if key and cert are both missing.

Unfortunately, this can cause other problems comes with LuCI, where there is easily possible to screw up the upload completely and for example delete the certificate option and keeping the key option.

In this example UHTTPD_KEY will contain new key and UHTTPD_CERT will contain unrelated old certificate, which is wrong and again uhttpd fail to start completely.

After reading the source code of the init script, it seems, that the default fallback values never worked, so it would be safe to do solution like this

config_get UHTTPD_KEY  "$cfg" key
config_get UHTTPD_CERT "$cfg" cert

This is also more robust to wrong configurations from LuCI because at least pure HTTP will be available in most cases.

Default values /etc/uhttpd.key and /etc/uhttpd.crt are still present in default uci config, so nothing should change for anybody and it will just be more robust to wrong configuration from LuCI.

22.12.20171239PackagesBug ReportVery LowLowuhttpd package comes with /etc/config/uhttpd file that ...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of LEDE release, packages, etc.
- Steps to reproduce

root@OpenWRT:~# cat /etc/openwrt_release
DISTRIB_ID=’OpenWrt’ DISTRIB_RELEASE=’SNAPSHOT’ DISTRIB_REVISION=’r5601-efa22b1’ DISTRIB_TARGET=’ar71xx/generic’ DISTRIB_ARCH=’mips_24kc’ DISTRIB_DESCRIPTION=’OpenWrt SNAPSHOT r5601-efa22b1’ DISTRIB_TAINTS=’’ root@OpenWRT:~# cat /etc/board.json
{

"model": {
	"id": "tl-wdr4300",
	"name": "TP-Link TL-WDR3600 v1"
},

...

to reproduce:
- install lede
- run lua/luci, modify configuration somehow and save, so that /etc/config/uhttpd is overwritten
- flash corresponding sysupgrade.bin with “[x] keepsettings” - ssh root@OpenWRT.localnet opkg update
- ssh root@OpenWRT.localnet opkg install luci-ssl strace snmpd snmp-mibs lsof rsyslog diffutils vim less

note in output:

Collected errors:
* resolve_conffiles: Existing conffile /etc/config/uhttpd is different from the conffile in the new package. The new conffile will be placed at /etc/config/uhttpd-opkg.
* resolve_conffiles: Existing conffile /etc/config/luci is different from the conffile in the new package. The new conffile will be placed at /etc/config/luci-opkg.

The contents of uhttpd-opkg and uhttpd are quite the same, the lua/luci version being without comments and with ‘quoted’ values (see attached file).

A resolution of “wont fix” would be absolutely acceptable.

Kind regards,
Dominik

02.01.20213554PackagesBug ReportVery LowLowuhttpd non-English directory displays garbled character...TrunkUnconfirmed Task Description

uhttpd non-English directory displays garbled characters。

Modify uh_file_dirlist function

ustream_printf(cl→us, “Content-Type: text/html\r\n\r\n”);

ustream_printf(cl→us, “Content-Type: text/html; charset=utf-8\r\n\r\n”);

This way all languages can be displayed perfectly!

03.05.20213780Base systemBug ReportVery LowLowuhttpd error "Request Entity Too Large" on luci page af...TrunkUnconfirmed Task Description

Router: WRT1900AC v1 (mamba)
Openwrt: my build, r16521, includes luci-ssl, tvheadend server and dvb driver

Luci page ok at first.
After configuring tvheadend, including accounts, dvb muxes, channels, etc., luci page won’t open anymore. uhttpd error: Request Entity Too Large.
Starts working again after clearing browser cookies. Some of those cookies are set by tvheadend.

02.01.20213559Base systemBug ReportMediumLowuclient-fetch fails to download more than 2 filesAllNew Task Description

uclient-fetch has support for downloading several files:

uclient-fetch URL1 URL2 URL3 ...

However, this only works for the first two URLs. The third and above URLs simply cause uclient-fetch to re-download the second URL again.

In addition, only the first URL is checked for validity. If a subsequent URL is invalid, then the previous URL is re-used:

uclient-fetch http://example.com invalid

This example will download http://example.com twice.

24.02.20202852Base systemBug ReportVery LowLowuclient-fetch (wget) buggy with http-authTrunkUnconfirmed Task Description

When doing a wget (via uclient-fetch) including user/password (http-auth), on my server I see following log from apache2:

172.16.0.1 - - [24/Feb/2020:09:44:51 +0100] “GET xxxxxx.php?mac=AA:BB:CC:DD:EE:FF HTTP/1.1” 401 596 “-” “uclient-fetch” 172.16.0.1 - username [24/Feb/2020:09:44:52 +0100] “GET xxxxxx.php?mac=AA:BB:CC:DD:EE:FF HTTP/1.1” 200 212 “-” “uclient-fetch”

This is reproducable; looks like first a GET without auth, and then a retry incl. auth.

wget from busybox works flawlessly.

26.05.20203125Base systemBug ReportVery LowLowuclibc++ doesn't build when generated file names are to...TrunkUnconfirmed Task Description

I was having trouble building uClibc++ in Openwrt. I figured out that the problem was that the LIBSUP_DEP variable, which is a filename that gets created during the build, was too long for my file system. The name generated was over 150 char long and my fs has a limit of 143. I guess this because I have an encrypted homedir. Anyway, I analyzed the build system of uClibc++, and it seems to vary with the file location for libsupc++.a which is used to extract a bunch of symbols and create the static lib.

I had configured my build to build for a Turris Omnia.

Software versions: master branch of OpenWrt

Steps to reproduce:
1. Configure to build image for Turris Omnia.
2. Build with: `make package/libs/uclibc++/compile -j1 V=sc`

My proposed fix: https://bugs.busybox.net/show_bug.cgi?id=12951

If this patch get’s accepted upstream, we should add a patch to package/libs/uclibc++/patches/ for this.

 


20.09.20181859Base systemBug ReportVery LowLowuclibc++ crashes when trying to splice to empty listTrunkUnconfirmed Task Description

Right now, each program seems to crash which uses splice to move an item to another list (which is empty):

  #include <list>
  
  int main()
  {
  	std::list<int> empty_list;
  	std::list<int> two_item_list;
  
  	two_item_list.push_back(1);
  	two_item_list.push_back(2);
  
  	empty_list.splice(empty_list.end(), two_item_list, two_item_list.begin());
  
  	return 0;
  }

It crashes with:

  4         {
  1: two_item_list = {list_start = 0x1, list_end = 0x77f0d57f <blobmsg_add_field+42>, elements = 2012192832, a = {<No data fields>}}
  2: empty_list = {list_start = 0x0, list_end = 0x77ec51ec <operator new(unsigned int)+44>, elements = 32, a = {<No data fields>}}
  (gdb) n
  151             std::list<int> empty_list;
  1: two_item_list = {list_start = 0x1, list_end = 0x77f0d57f <blobmsg_add_field+42>, elements = 2012192832, a = {<No data fields>}}
  2: empty_list = {list_start = 0x0, list_end = 0x77ec51ec <operator new(unsigned int)+44>, elements = 32, a = {<No data fields>}}
  (gdb) n
  5             std::list<int> two_item_list;
  1: two_item_list = {list_start = 0x1, list_end = 0x77f0d57f <blobmsg_add_field+42>, elements = 2012192832, a = {<No data fields>}}
  2: empty_list = {list_start = 0x77eb0910, list_end = 0x77eb0910, elements = 0, a = {<No data fields>}}
  (gdb) n
  6             two_item_list.push_back(1);
  1: two_item_list = {list_start = 0x77eb0930, list_end = 0x77eb0930, elements = 0, a = {<No data fields>}}
  2: empty_list = {list_start = 0x77eb0910, list_end = 0x77eb0910, elements = 0, a = {<No data fields>}}
  (gdb) n
  7             two_item_list.push_back(2);
  1: two_item_list = {list_start = 0x77eb0950, list_end = 0x77eb0930, elements = 1, a = {<No data fields>}}
  2: empty_list = {list_start = 0x77eb0910, list_end = 0x77eb0910, elements = 0, a = {<No data fields>}}
  (gdb) n
  8             empty_list.splice(empty_list.end(), two_item_list, two_item_list.begin());
  1: two_item_list = {list_start = 0x77eb0950, list_end = 0x77eb0930, elements = 2, a = {<No data fields>}}
  2: empty_list = {list_start = 0x77eb0910, list_end = 0x77eb0910, elements = 0, a = {<No data fields>}}
  (gdb) n
  
  Program received signal SIGSEGV, Segmentation fault.
  std::list<int, std::allocator<int> >::splice (i=..., x=..., position=..., this=0x7ffffb98) at /usr/src/openwrt/staging_dir/target-mips_24kc_musl-1.1.16/usr/include/uClibc++/list:608
  608                             i.link_struct()->previous->next = i.link_struct()->next;

The reported line is

  605                 //Insert at begining special case
  606                 if(position == begin()){
  607 
  608                         i.link_struct()->previous->next = i.link_struct()->next;
  609                         i.link_struct()->next->previous = i.link_struct()->previous;
  610 
  611                         i.link_struct()->previous = 0;
  612                         i.link_struct()->next = position.link_struct();
  613                         position.link_struct()->previous = i.link_struct();
  614 
  615                         list_start = i.link_struct();
  616 
  617                         --x.elements;
  618                         ++elements;
  619                         return;
  620                 }
09.04.20202985Base systemBug ReportVery LowLowuci unbound forward zone portTrunkUnconfirmed Task Description

uci compile two different config options for unbound zone clause based on provided string value for list server.
If port is provided using ‘@’ charactes it assumes it’s a host rather than address and compile option to ' forward-host’.
It should be allow to use ‘@’ character in addition to IP address and compile option to ‘forward-addr’.

config zone

      list zone_name 'myzone.loc.'
      list server '10.1.0.2'
      list server '10.1.0.1'

compiles to

forward-zone:

name: myzone.loc.
forward-addr: 10.1.0.1@53
forward-addr: 10.1.0.2@53

config zone

      list zone_name 'myzone.loc.'
      list server '10.1.0.2@5053'
      list server '10.1.0.1@5053'

compiles to

forward-zone:

name: myzone.loc.
forward-host: 10.1.0.1@5053
forward-host: 10.1.0.2@5053

config zone

      list server '10.1.0.2'
      list server '10.1.0.1'

OpenWrt SNAPSHOT r12784-5562c5add2

02.02.20181321PackagesBug ReportVery LowLowUCI potential invalid memory access when updating exist...TrunkUnconfirmed Task Description

- Software versions

UCI 2018-01-01

- Device problem occurs on

There is a potential memory leak when updating existing section in list.c:709

Return pointer from realloc may not be the same as ptr→s. Due to realloc mechanism, pointers value from ptr→s→options are copied to the ptr→last. However, those pointers (ptr→last→s→options) are pointing back to the ptr→s which has been freed.

Below are steps to reproduce.

- Steps to reproduce

 

Given a config file like that

cat /etc/config/network
config interface wan

Given test codes like that

#include <uci.h>

int main(int argc, const char *argv[])
{
    struct uci_context *uci_ctx = uci_alloc_context();
    struct uci_ptr ptr          = {0};
    ptr.package                 = "network";
    ptr.section                 = "wan";
    ptr.value                   = "interface";
    uci_lookup_ptr(uci_ctx, &ptr, NULL, false);
    uci_set(uci_ctx, &ptr);
    uci_save(uci_ctx, ptr.p);
    uci_commit(uci_ctx, &ptr.p, false);
    uci_free_context(uci_ctx);

    return 0;
}

Runs like that

cd UCI_PROJECT_ROOT
mkdir build
cmake ..
make
valgrind ./test/test_mem_leak_section
.... CTRL-C after a while ....

Here is the output of valgrind before the hotfix below

==1567== Memcheck, a memory error detector
==1567== Copyright (C) 2002-2013, and GNU GPL'd, by Julian Seward et al.
==1567== Using Valgrind-3.10.1 and LibVEX; rerun with -h for copyright info
==1567== Command: ./test/test_mem_leak_section
==1567== 
==1567== Invalid write of size 8
==1567==    at 0x4E3946B: uci_list_del (uci_internal.h:116)
==1567==    by 0x4E3946B: uci_free_element (list.c:71)
==1567==    by 0x4E394F4: uci_free_section (list.c:211)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a850 is 32 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
==1567== Invalid write of size 8
==1567==    at 0x4E3946E: uci_list_del (uci_internal.h:117)
==1567==    by 0x4E3946E: uci_free_element (list.c:71)
==1567==    by 0x4E394F4: uci_free_section (list.c:211)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a858 is 40 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
==1567== Invalid read of size 8
==1567==    at 0x4E394F8: uci_free_section (list.c:210)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a850 is 32 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
==1567== Invalid read of size 4
==1567==    at 0x4E39486: uci_free_option (list.c:97)
==1567==    by 0x4E394F4: uci_free_section (list.c:211)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a878 is 72 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
==1567== Invalid read of size 8
==1567==    at 0x4E39456: uci_free_element (list.c:69)
==1567==    by 0x4E394F4: uci_free_section (list.c:211)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a868 is 56 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
==1567== Invalid read of size 8
==1567==    at 0x4E3945F: uci_free_element (list.c:70)
==1567==    by 0x4E394F4: uci_free_section (list.c:211)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a850 is 32 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
==1567== Invalid free() / delete / delete[] / realloc()
==1567==    at 0x4C2BDEC: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E394F4: uci_free_section (list.c:211)
==1567==    by 0x4E39590: uci_free_package (list.c:243)
==1567==    by 0x4E39C97: uci_free_context (libuci.c:84)
==1567==    by 0x400719: main (test_mem_leak_section.c:12)
==1567==  Address 0x561a850 is 32 bytes inside a block of size 82 free'd
==1567==    at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1567==    by 0x4E3C4FE: uci_realloc (util.c:49)
==1567==    by 0x4E3AC77: uci_set (list.c:709)
==1567==    by 0x400711: main (test_mem_leak_section.c:11)
==1567== 
^C
==1567== 
==1567== HEAP SUMMARY:
==1567==     in use at exit: 973 bytes in 17 blocks
==1567==   total heap usage: 189 allocs, 408,927 frees, 8,483 bytes allocated
==1567== 
==1567== LEAK SUMMARY:
==1567==    definitely lost: 0 bytes in 0 blocks
==1567==    indirectly lost: 0 bytes in 0 blocks
==1567==      possibly lost: 0 bytes in 0 blocks
==1567==    still reachable: 973 bytes in 17 blocks
==1567==         suppressed: 0 bytes in 0 blocks
==1567== Rerun with --leak-check=full to see details of leaked memory
==1567== 
==1567== For counts of detected and suppressed errors, rerun with: -v
==1567== ERROR SUMMARY: 2043783 errors from 7 contexts (suppressed: 0 from 0)

- Hot fix

-			ptr->last = NULL;
-			ptr->last = uci_realloc(ctx, ptr->s, sizeof(struct uci_section));
-			ptr->s = uci_to_section(ptr->last);
-			uci_list_fixup(&ptr->s->e.list);
+			ptr->last = (struct uci_element *) ptr->s;

Please take a look the attachment. It includes my hot fix for this issue and corresponding demo codes as illustrated above.

I am not sure how to “update” the “uci_options” associated to the “uci_section”. So, I simply omit and replace the realloc part.

Tested by valgrind again

valgrind ./test/test_mem_leak_section 
==1749== Memcheck, a memory error detector
==1749== Copyright (C) 2002-2013, and GNU GPL'd, by Julian Seward et al.
==1749== Using Valgrind-3.10.1 and LibVEX; rerun with -h for copyright info
==1749== Command: ./test/test_mem_leak_section
==1749== 
==1749== 
==1749== HEAP SUMMARY:
==1749==     in use at exit: 0 bytes in 0 blocks
==1749==   total heap usage: 392 allocs, 392 frees, 23,574 bytes allocated
==1749== 
==1749== All heap blocks were freed -- no leaks are possible
==1749== 
==1749== For counts of detected and suppressed errors, rerun with: -v
==1749== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)


02.12.20181981Base systemBug ReportVery LowLowUCI import -m failes if invoked multiple times without ...TrunkUnconfirmed Task Description

Hello, I’m using somewhat old LEDE, but this does not seem to make deffierence. Correct me if I’m wrong.
I installed fresh version of UCI:

root@router:~# opkg info uci
Package: uci
Version: 2018-08-11-4c8b4d6e-1
Depends: libc, libuci
Status: install user installed
Section: base
Architecture: mips_24kc
Size: 7166
Filename: uci_2018-08-11-4c8b4d6e-1_mips_24kc.ipk
Description: Utility for the Unified Configuration Interface (UCI)
Installed-Time: 1543713053

Now, the bug.
I have a small test file with some `config`s in it. They’re named.
If I do import multiple times it results if an error.

Here’s my shell log that should to reproduce this issue:

root@router:~# uci commit                           # make sure there're no pending changes
root@router:~# rm -f /etc/config/import-test        # clear the target cofnig file for a clean test
root@router:~# cat import-test                      # dispay the file we're about to import
config host 'a'
	option name 'a'

config host 'b'
	option name 'b'
root@router:~# uci changes                               # demonstrate there're no pending changes
root@router:~# uci -m import import-test < import-test   # invoke the import
root@router:~# uci changes                               # still no changes after first import
root@router:~# uci -m import import-test < import-test   # import import for the second time
root@router:~# uci changes                               # wow, now there are some changes! this is not expected
import-test.a='host'
import-test.b='host'
root@router:~# uci -m import import-test < import-test   # call import for the third time - and it fails with an error
uci: Parse error (option/list command found before the first section) at line 2, byte 1

This looks like a bug to me. Thoughts?

22.01.20202764Base systemBug ReportVery LowHighucert: ucert -A output is invalidTrunkUnconfirmed Task Description

ucert -A generates something that ucert cannot read back.

This happens because ucert -A appears to be appending several libubox “blobs” together, but cert_load() uses libubox’ blob_parse_untrusted() which expects to get a buffer with a single blob inside, and no padding.

Thus a valid ucert file with certificate and signature will be *bigger* than the first blob inside it, and blob_parse_untrusted() in libubox won’t even try to process it.

Since this renders ucert useless, severity is set to high.

This is related to  FS#2762  and FS#2763

22.01.20202763Base systemBug ReportVery LowLowucert: missing tests for certificate chains and ucert -...TrunkUnconfirmed Task Description

ucert is missing test cases for:

ucert -A
ucert -D on the output of ucert -A.

This is very important because it would have flagged the fact that currently ucert -A generates something that ucert will not read back, in fact rendering signed sysupgrade images unusable without sysupgrade -F.

15.09.20192495Base systemBug ReportVery LowLowucert rebuild within SDK segfaults on Debian 10 and Ubu...TrunkNew Task Description

Using the 19.07-SNAPSHOT SDK build Sept 12 (last successful build by the buildbots it looks like), and current openwrt-19.07 branch on the feeds, if doing signed build, the build fails due to ucert segfaulting (this is on Debian 10).

ldd staging_dir/host/bin/ucert shows:

      linux-vdso.so.1 (0x00007ffd03d63000)
      libubox.so => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libubox.so (0x00007ff0db3b0000)
      libblobmsg_json.so => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libblobmsg_json.so (0x00007ff0db3a8000)
      libjson-c.so.2 => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libjson-c.so.2 (0x00007ff0db398000)
      libc.so.6 => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libc.so.6 (0x00007ff0daff8000)
      /lib64/ld-linux-x86-64.so.2 (0x00007ff0db3c8000)

I’m wondering if the problem is due to using host instead SDK libraries.


09.05.20181536Base systemBug ReportVery LowMediumUbus: not creating needed /var/run directoryAllUnconfirmed Task Description

/sbin/init create /tmp/run directory.
ubus uses /var/run directory that’s normally linked to /tmp aka /tmp/run and starts up.

If by accident /var is deleted and the router is rebooted the system hangs forever.
It does not help to create an empty /var directory /var/run is not created by ubus.

Console shows: “procd - early -” and afterwards “procd - ubus -”
The needed directories are created later inside “/etc/rc.d/S10boot” aka “/etc/init.d/boot”

10.07.20203221PackagesBug ReportLowLowubox: validate.c: Link-Local IPv6 with interface ID not...AllNew Task Description

validate.c uses inet_pton for identifying IPv6 addresses [1], and this seems to not understand interface identifiers as used for Link-local IPv6 addresses.

Reproduce:

root@FFF-GW-Adrian:~# /sbin/validate_data host fdff::1
host - fdff::1 = true
root@FFF-GW-Adrian:~# /sbin/validate_data host fe80::1
host - fe80::1 = true
root@FFF-GW-Adrian:~# /sbin/validate_data host fe80::1%br-mesh
host - fe80::1%br-mesh = false

This is a problem practically whenever validata_data is used to check uci values.

For example, it is not possible to use a link-local address for specifying an NTP server:

https://github.com/openwrt/openwrt/blob/master/package/utils/busybox/files/sysntpd#L33

If ‘server:list(host)’ is changed to ‘server:list(string)’ there, it obviously works fine, as it’s just the validation.

[1] https://git.openwrt.org/?p=project/ubox.git;a=blob;f=validate/validate.c;h=e72b8117ecd8b680778b0f5c7637ed6546a7736b;hb=HEAD#l402

19.02.20181374PackagesBug ReportVery LowHighubox: logd memory leak AllUnconfirmed Task Description

I checked the use of memory with `top` command and saw that the logd was consuming memory disproportionately (around 60MB).

```
PID PPID USER STAT VSZ VSZ %CPU COMMAND
971 1 root S 59768 48% 0% /sbin/logd -S 64
```

- There was no remote log configured.
- I was using logread -f for a long time.
- When doing an /etc/init.d/log restart the consumed memory returned to normality.
- ubox version:

```
PKG_SOURCE_DATE:=2017-09-01
PKG_SOURCE_VERSION:=b1bc8d5fb874cdd22701a08d0fb0de4330f86814
PKG_MIRROR_HASH:=b07e750d941d691e2745aa3a058e504966b15d1db5636162dc686bad275eb296
```


19.09.20203346PackagesBuild FailureVery LowMediumUbox invalid memory access (does not build with gcc10)TrunkUnconfirmed Task Description

See: https://git.openwrt.org/?p=project/ubox.git;a=blob;f=kmodloader.c;h=6f06ee3939f2f3e151357d33cfd165603cb40e4d;hb=HEAD#l699

Prints:

In function 'main_insmod',
    inlined from 'main' at /home/openwrt/openwrt-lam/build/archer-c7-v2eu/build_dir/target-mips_24kc_musl/ubox-2019-12-31-0e34af14/kmodloader.c:1062:10:
/home/openwrt/openwrt-lam/build/archer-c7-v2eu/build_dir/target-mips_24kc_musl/ubox-2019-12-31-0e34af14/kmodloader.c:734:13: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
  734 |  options[0] = 0;
      |  ~~~~~~~~~~~^~~
/home/openwrt/openwrt-lam/build/archer-c7-v2eu/build_dir/target-mips_24kc_musl/ubox-2019-12-31-0e34af14/kmodloader.c: In function 'main':
/home/openwrt/openwrt-lam/build/archer-c7-v2eu/build_dir/target-mips_24kc_musl/ubox-2019-12-31-0e34af14/kmodloader.c:727:12: note: at offset 0 to an object with size 0 allocated by 'malloc' here
  727 |  options = malloc(len);
      |            ^~~~~~~~~~~

Fix im using for my builds is attached.

Kind regards
MartB

19.01.20181284Base systemBug ReportVery LowLowuboot-kirkwood does not speak MMC on Pogoplug v4TrunkUnconfirmed Task Description

Testing on a Pogoplug V4 with the u-boot committed in f5d267df638d7adc6654f4a1a3d7c7557cafd759, there is no MMC support despite that 010-pogoplug_v4.patch includes kirkwood_mmc.c and friends. Boot messages are simply

U-Boot 2017.09 (Jan 19 2018 - 21:51:49 +0000)
Pogoplug V4

SoC:   Kirkwood 88F6281_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  128 MiB
MMC:   
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   egiga0
Error: egiga0 address not set.

On the other hand, the uboot shipped from https://forum.doozan.com/read.php?3,7477,7553 understands MMC. Its boot messages are

U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700)
Pogoplug V4

SoC:   Kirkwood 88F6192_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  128 MiB
MMC:   MVEBU_MMC: 0
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
28.03.2017659Base systemBug ReportVery LowLowuboot-kirkwood (at least) fails to build if swig is ins...TrunkUnconfirmed Task Description

Building LEDE head (reboot-3906-g2a2dfb2be7) on a machine without python development headers but with swig in $PATH yields

  HOSTLD  tools/dumpimage
  HOSTCC  tools/mkimage.o
  HOSTLD  tools/mkimage
swig -python -o tools/libfdt_wrap.c lib/libfdt/libfdt.swig
LDFLAGS="" python ./lib/libfdt/setup.py \
        "-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer    -include ./include/libfdt_env.h -idirafterinclude -idirafter./arch/arm/include -I./lib/libfdt -I./tools -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -D_GNU_SOURCE " lib/libfdt/fdt.c lib/libfdt/fdt_ro.c lib/libfdt/fdt_rw.c lib/libfdt/fdt_strerror.c lib/libfdt/fdt_wip.c lib/libfdt/fdt_region.c lib/libfdt/fdt_sw.c tools/libfdt_wrap.c
tools/libfdt_wrap.c:130:21: fatal error: Python.h: No such file or directory
 # include <Python.h>
                     ^
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
tools/Makefile:123: recipe for target 'tools/_libfdt.so' failed
make[5]: *** [tools/_libfdt.so] Error 1
Makefile:1229: recipe for target 'tools' failed
make[4]: *** [tools] Error 2
make[4]: Leaving directory '/tank/openwrt/scratch/builder-nwftest/build_dir/target-arm_xscale_musl_eabi/u-boot-pogo_v4/u-boot-2017.03'

As I don’t believe there are any in-tree consumers of the python libfdt bindings, adding the following patch file, which just removes the test for swig and therefore acts as if it is never present, should do the right thing:

$ cat package/boot/uboot-kirkwood/patches/201-no-python-fdt.patch 
--- u-boot-2017.03/tools/Makefile.orig	2017-03-28 03:11:34.081325904 +0000
+++ u-boot-2017.03/tools/Makefile	2017-03-28 03:13:09.225349051 +0000
@@ -112,10 +112,6 @@
 fit_info-objs   := $(dumpimage-mkimage-objs) fit_info.o
 fit_check_sign-objs   := $(dumpimage-mkimage-objs) fit_check_sign.o
 
-# Build a libfdt Python module if swig is available
-# Use 'sudo apt-get install swig libpython-dev' to enable this
-hostprogs-y += \
-	$(if $(shell which swig 2> /dev/null),_libfdt.so)
 _libfdt.so-sharedobjs += $(LIBFDT_OBJS)
 libfdt:
 
09.10.20192540KernelBug ReportVery LowMediumUBNT-ERX: hwnat = very slow "tls shaking"TrunkUnconfirmed Task Description

OpenWrt SNAPSHOT r11175-700e7a2eb9
UBNT-ERX (ramips)

When hwnat is turn on than no www browsing is possible
due to very, very slow “tls shaking”. This is so slow that
mostly there are timeouts. When hwnat is turn off and just software
offloading is used than it works like a charm.

29.12.20171246Base systemBug ReportVery LowLowUbnt Nanostation Loco M2 - WDS link drops out after a f...TrunkUnconfirmed Task Description

Ubnt Nanostation Loco M2 - WDS link drops out after a few hours
I have a pair of Nanostation Loco M2 access points setup as a wireless bridge over a ~1300 foot (~400M) line of sight link.
I have had LEDE 17.01.3, 17.0.4 and OpenWrt SNAPSHOT r5499-575178e / LuCI Master (git-17.343.27587-8e6b1a6).

One is setup as a WDS AP and the other is setup as a WDS Client, after a few hours (4-12 hours?) the link drops out but still says that is connected (if I go to status it shows the other AP as connected but I cannot ping or do anything else across the link).
If I restart the wireless service on the client, the connection comes right back and all is well for a 4-12 hours.
Anyone have any suggestions on where to look? Below are the kernel and system logs for the time period in question:

AP Config files:
/etc/config/network:

config interface 'lan'
	option type 'bridge'
	option ifname 'eth0'
	option proto 'static'
	option netmask '255.255.255.0'
	option ipaddr 'x.x.x.2'
	option gateway 'x.x.x.1'
	option dns 'x.x.x.1'

/etc/config/wireless:

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11g'
	option path 'pci0000:00/0000:00:00.0'
	option channel '1'
	option country 'US'
	option htmode 'HT40'
	option distance '400'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'LAN_bridge'
	option wds '1'
	option key 'SECRET'
	option encryption 'psk2+tkip+ccmp'

Client Config files:
/etc/config/network:

config interface 'lan'
	option type 'bridge'
	option proto 'static'
	option netmask '255.255.255.0'
	option ipaddr 'x.x.x.3'
	option gateway 'x.x.x.1'
	option dns 'x.x.x.1'
	option _orig_ifname 'eth0'
	option _orig_bridge 'true'
	option ifname 'eth0'
	option delegate '0'

/etc/config/wireless:

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11g'
	option path 'pci0000:00/0000:00:00.0'
	option channel '1'
	option htmode 'HT40'
	option country 'US'
	option distance '400'

config wifi-iface
	option ssid 'LAN_bridge'
	option device 'radio0'
	option mode 'sta'
	option bssid 'AP_BSSID'
	option key 'SECRET'
	option wds '1'
	option network 'lan'
	option encryption 'psk2+tkip+ccmp'

AP Syslog:

Sun Nov 26 14:01:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:11:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:21:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:31:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:41:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:51:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:01:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:11:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:21:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
**Somewhere in here the link dropped out and I rebooted the client**
Sun Nov 26 15:28:14 2017 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED ClientMAC
Sun Nov 26 15:28:14 2017 kern.info kernel: [1893620.914221] device wlan0.sta1 left promiscuous mode
Sun Nov 26 15:28:14 2017 kern.info kernel: [1893620.919427] br-lan: port 3(wlan0.sta1) entered disabled state
Sun Nov 26 15:28:52 2017 daemon.info hostapd: wlan0: STA ClientMAC IEEE 802.11: authenticated
Sun Nov 26 15:28:52 2017 daemon.info hostapd: wlan0: STA ClientMAC IEEE 802.11: associated (aid 1)
Sun Nov 26 15:28:52 2017 kern.info kernel: [1893659.422460] device wlan0.sta1 entered promiscuous mode
Sun Nov 26 15:28:52 2017 kern.info kernel: [1893659.440920] br-lan: port 3(wlan0.sta1) entered forwarding state
Sun Nov 26 15:28:52 2017 kern.info kernel: [1893659.447086] br-lan: port 3(wlan0.sta1) entered forwarding state
Sun Nov 26 15:28:53 2017 daemon.notice hostapd: wlan0: AP-STA-CONNECTED ClientMAC
Sun Nov 26 15:28:53 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: pairwise key handshake completed (RSN)
Sun Nov 26 15:28:54 2017 kern.info kernel: [1893661.440359] br-lan: port 3(wlan0.sta1) entered forwarding state
Sun Nov 26 15:31:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:41:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)

AP Kernel Log:

[1649563.614654] br-lan: port 1(eth0) entered disabled state
[1649564.612365] eth0: link up (100Mbps/Full duplex)
[1649564.617165] br-lan: port 1(eth0) entered forwarding state
[1649564.622888] br-lan: port 1(eth0) entered forwarding state
[1649566.620738] br-lan: port 1(eth0) entered forwarding state
[1652624.237670] ------------[ cut here ]------------
[1652624.242540] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.254355] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.264049] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.328632] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.335791] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  ...
[1652624.371919] Call Trace:[<80071a8c>] 0x80071a8c
[1652624.376597] [<80071a8c>] 0x80071a8c
[1652624.380290] [<80081888>] 0x80081888
[1652624.383987] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.390133] [<800818e4>] 0x800818e4
[1652624.393854] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.399981] [<80260a14>] 0x80260a14
[1652624.403663] [<80260bf8>] 0x80260bf8
[1652624.407374] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652624.413800] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652624.419701] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652624.425575] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652624.431446] [<80084448>] 0x80084448
[1652624.435130] [<80083e04>] 0x80083e04
[1652624.438821] [<800a8014>] 0x800a8014
[1652624.442508] [<8006a990>] 0x8006a990
[1652624.446194] [<80060bf4>] 0x80060bf4
[1652624.449876] 
[1652624.451557] ---[ end trace 86b60d5fad42c0e7 ]---
[1652624.456661] ------------[ cut here ]------------
[1652624.461517] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.473297] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.482988] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.547552] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.554704] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  ...
[1652624.590833] Call Trace:[<80071a8c>] 0x80071a8c
[1652624.595502] [<80071a8c>] 0x80071a8c
[1652624.599197] [<80081888>] 0x80081888
[1652624.602893] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.609038] [<800818e4>] 0x800818e4
[1652624.612760] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.618896] [<80260a14>] 0x80260a14
[1652624.622578] [<80260bf8>] 0x80260bf8
[1652624.626277] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652624.632718] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652624.638615] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652624.644489] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652624.650366] [<80084448>] 0x80084448
[1652624.654046] [<80083e04>] 0x80083e04
[1652624.657738] [<800a8014>] 0x800a8014
[1652624.661423] [<8006a990>] 0x8006a990
[1652624.665109] [<80060bf4>] 0x80060bf4
[1652624.668791] 
[1652624.670471] ---[ end trace 86b60d5fad42c0e8 ]---
[1652624.675578] ------------[ cut here ]------------
[1652624.680433] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.692211] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.701903] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.766474] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.773641] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  ...
[1652624.809756] Call Trace:[<80071a8c>] 0x80071a8c
[1652624.814426] [<80071a8c>] 0x80071a8c
[1652624.818120] [<80081888>] 0x80081888
[1652624.821816] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.827961] [<800818e4>] 0x800818e4
[1652624.831683] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.837810] [<80260a14>] 0x80260a14
[1652624.841493] [<80260bf8>] 0x80260bf8
[1652624.845192] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652624.851632] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652624.857530] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652624.863403] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652624.869275] [<80084448>] 0x80084448
[1652624.872960] [<80083e04>] 0x80083e04
[1652624.876638] [<800a8014>] 0x800a8014
[1652624.880331] [<8006a990>] 0x8006a990
[1652624.884015] [<80060bf4>] 0x80060bf4
[1652624.887697] 
[1652624.889376] ---[ end trace 86b60d5fad42c0e9 ]---
[1652624.894482] ------------[ cut here ]------------
[1652624.899340] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.911125] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.920817] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.985380] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.992546] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  ...
[1652625.028662] Call Trace:[<80071a8c>] 0x80071a8c
[1652625.033331] [<80071a8c>] 0x80071a8c
[1652625.037027] [<80081888>] 0x80081888
[1652625.040722] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652625.046868] [<800818e4>] 0x800818e4
[1652625.050589] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652625.056714] [<80260a14>] 0x80260a14
[1652625.060410] [<80260bf8>] 0x80260bf8
[1652625.064115] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652625.070555] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652625.076442] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652625.082330] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652625.088198] [<80084448>] 0x80084448
[1652625.091882] [<80083e04>] 0x80083e04
[1652625.095561] [<800a8014>] 0x800a8014
[1652625.099258] [<8006a990>] 0x8006a990
[1652625.102938] [<80060bf4>] 0x80060bf4
[1652625.106607] 
[1652625.108295] ---[ end trace 86b60d5fad42c0ea ]---
[1656961.531085] device wlan0.sta1 left promiscuous mode
[1656961.536375] br-lan: port 3(wlan0.sta1) entered disabled state
[1657000.400508] device wlan0.sta1 entered promiscuous mode
[1657000.416849] br-lan: port 3(wlan0.sta1) entered forwarding state
[1657000.423019] br-lan: port 3(wlan0.sta1) entered forwarding state
[1657002.415840] br-lan: port 3(wlan0.sta1) entered forwarding state
[1729152.802304] eth0: link down
[1729152.805769] br-lan: port 1(eth0) entered disabled state
[1729180.803335] eth0: link up (100Mbps/Full duplex)
[1729180.808173] br-lan: port 1(eth0) entered forwarding state
[1729180.813898] br-lan: port 1(eth0) entered forwarding state
[1729182.811672] br-lan: port 1(eth0) entered forwarding state
[1893620.914221] device wlan0.sta1 left promiscuous mode
[1893620.919427] br-lan: port 3(wlan0.sta1) entered disabled state
[1893659.422460] device wlan0.sta1 entered promiscuous mode
[1893659.440920] br-lan: port 3(wlan0.sta1) entered forwarding state
[1893659.447086] br-lan: port 3(wlan0.sta1) entered forwarding state
[1893661.440359] br-lan: port 3(wlan0.sta1) entered forwarding state
[1894771.793057] device wlan0.sta1 left promiscuous mode
[1894771.798391] br-lan: port 3(wlan0.sta1) entered disabled state
[1894777.535302] device wlan0.sta1 entered promiscuous mode
[1894777.547462] br-lan: port 3(wlan0.sta1) entered forwarding state
[1894777.553631] br-lan: port 3(wlan0.sta1) entered forwarding state
[1894779.546485] br-lan: port 3(wlan0.sta1) entered forwarding state
[1895148.287966] device wlan0.sta1 left promiscuous mode
[1895148.293178] br-lan: port 3(wlan0.sta1) entered disabled state
[1895148.349721] device wlan0 left promiscuous mode
[1895148.354492] br-lan: port 2(wlan0) entered disabled state
[1895150.539163] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1895150.663905] device wlan0 entered promiscuous mode
[1895153.075046] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[1895153.081886] br-lan: port 2(wlan0) entered forwarding state
[1895153.087660] br-lan: port 2(wlan0) entered forwarding state
[1895154.299110] device wlan0.sta1 entered promiscuous mode
[1895154.316512] br-lan: port 3(wlan0.sta1) entered forwarding state
[1895154.322716] br-lan: port 3(wlan0.sta1) entered forwarding state
[1895155.086003] br-lan: port 2(wlan0) entered forwarding state
[1895156.315941] br-lan: port 3(wlan0.sta1) entered forwarding state

Thanks in advance

Aaron Z


23.12.20214198Base systemBug ReportVery LowMediumUbnt Bullet M2 XW broken with 21.02+openwrt-21.02Unconfirmed Task Description

OpenWRT 19.07 works (https://downloads.openwrt.org/releases/19.07.8/targets/ath79/generic/openwrt-19.07.8-ath79-generic-ubnt_bullet-m-xw-squashfs-factory.bin)
OpenWrt 21.02 or master doesn’t (tftp flash or sysupgrade)

(need to find my serial cable now)

10.03.20192176KernelBug ReportMediumHighubiquiti loco xw (AR9342 Rev.2) stops receiving on wire...AllNew Task Description

This bug has been existing as long as the ubiquiti loco xw 5 ghz hardware is around, probably what we are dealing with is a hardware bug in the AR9342 Rev. 2 chip. It is somehow hard to reproduce, but it hits us reliable every couple of hours, sometimes days, running any version of OpenWrt up to todays master branch. It just happened again and this time I decided to check if the bug is actually listed on FS – in addition to creating the usual cron-job executing `iw dev wlan0 scan` every minute. There is even a watchdog in the community libremesh repository designed to catch exactly this bug:
https://github.com/libremesh/lime-packages/blob/master/packages/cotonete/Makefile#L21

So to run into it, here we got 2 ubiquiti nanobeam m5 devices running OpenWrt ar71xx/generic loco-m-xw pointing at each other over a distance of roughly 2km. This link is acceptable, but not perfect and slightly asymmetric.

Device A (worse RX SNR):

Station f0:9f:c2:xx:xx:7a (on wlan0-mesh)
	inactive time:	0 ms
	rx bytes:	1433997029
	rx packets:	8589913
	tx bytes:	23160025785
	tx packets:	15667682
	tx retries:	677924
	tx failed:	0
	rx drop misc:	30076
	signal:  	-76 [-79, -79] dBm
	signal avg:	-74 [-77, -77] dBm
	Toffset:	4887897799 us
	tx bitrate:	43.3 MBit/s MCS 10 short GI
	rx bitrate:	43.3 MBit/s MCS 4 short GI
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18117 seconds

Device B (better RX SNR)

Station fc:ec:da:xx:xx:8c (on wlan0-mesh)
	inactive time:	20 ms
	rx bytes:	23442553203
	rx packets:	16047526
	tx bytes:	1274688573
	tx packets:	8251479
	tx retries:	1337700
	tx failed:	2932
	rx drop misc:	45195
	signal:  	-72 [-79, -73] dBm
	signal avg:	-71 [-78, -73] dBm
	Toffset:	18446744068821653812 us
	tx bitrate:	57.8 MBit/s MCS 11 short GI
	rx bitrate:	43.3 MBit/s MCS 10 short GI
	last ack signal:24 dBm
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18179 seconds

Now it so happens that device A (and always only device A!) becomes deaf after some hours of mostly sending lots of traffic to device B. It will continue to send beacons, but loose all associations. device B will keep trying setting up a link, but it keeps ending up in ‘BLOCKED’ state and dumps using a monitor mode interface show that device A simply doesn’t react at all to any of the frames send by device B. A simple `iw dev wlan0 scan` on device A (which doesn’t give any results) fixes the problem.

The channel seems rather unused otherwise and signal quality only varies by weather conditions. Interestingly this seems to happen on non-DFS channels only. And it happens on Ad-Hoc mode (unencrypted, never tried encrypted) and 802.11s (open ie. setup via `iw` tool as well as with SAE ie. running `wpa_supplicant`) equally. It doesn’t happen on all nodes, but only on those with rather bad signal or at least one far-off neighbor.

Maybe related to FS#1246

I saw this occuring on ubnt nanostation loco m5 XW as well as on all nanobeam m5 variants (which is supposedly compatible with the loco-m-xw image).

ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47

WiFi EEPROM of the devices:

*
00001000  02 02 F0 9F C2 XX XX XX  00 30 3a 31 35 3a 36 64  |.....XXX.0:15:6d|
00001010  3a 64 64 3a 64 65 3a 61  64 00 00 00 00 00 1f 00  |:dd:de:ad.......|
00001020  33 01 00 00 00 00 04 00  00 00 2d 04 03 00 08 ff  |3.........-.....|
00001030  20 01 00 00 00 20 02 00  00 cc cc 0c 00 50 01 50  | .... .......P.P|
00001040  01 50 01 00 00 00 00 00  00 21 00 a4 00 00 00 00  |.P.......!......|
00001050  ff 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001060  0e 0e 03 00 2c e2 00 02  0e 1c e0 e0 00 0c e0 e0  |....,...........|
00001070  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001080  00 00 00 00 00 00 00 00  00 00 70 89 ac 00 00 00  |..........p.....|
00001090  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000010c0  00 00 00 70 ac 70 89 ac  70 89 ac 70 89 ac 22 22  |...p.p..p..p..""|
000010d0  22 22 22 22 22 22 22 22  20 1c 22 22 20 1c 22 22  |"""""""" ."" .""|
000010e0  20 1c 24 24 20 18 16 14  20 16 14 12 20 20 1c 14  | .$$ ... ...  ..|
000010f0  24 24 20 18 16 14 20 16  14 12 20 20 1c 14 24 24  |$$ ... ...  ..$$|
00001100  20 18 16 14 20 16 14 12  20 20 1c 14 22 22 1e 16  | ... ...  ..""..|
00001110  14 12 1e 14 12 10 20 20  1c 14 22 22 1e 16 14 12  |......  ..""....|
00001120  1e 14 12 10 20 20 1c 14  22 22 1e 16 14 12 1e 14  |....  ..""......|
00001130  12 10 20 20 1c 14 11 12  15 17 41 42 45 47 31 32  |..  ......ABEG12|
00001140  35 37 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |57pu..pu..pu..pu|
00001150  ac b8 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |..pu..pu..pu..pu|
*
00001170  ac b8 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |..<|<|<|<|<|<|<||
00001180  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
000011a0  3c 7c 10 01 00 00 22 22  02 00 00 00 00 00 00 00  |<|....""........|
000011b0  00 00 00 00 00 00 44 00  00 00 00 00 00 ff 00 00  |......D.........|
000011c0  00 00 00 00 00 00 00 00  00 00 00 00 ff 0e 0e 03  |................|
000011d0  00 2d e2 00 02 0e 1c 00  00 00 00 00 00 00 00 00  |.-..............|
000011e0  00 00 00 00 00 00 00 00  00 44 44 00 00 00 00 00  |.........DD.....|
000011f0  00 00 00 00 00 00 00 4c  58 68 8c a4 b4 bd cd d9  |.......LXh......|
00001200  00 89 00 00 00 dc 00 89  00 00 00 e0 00 8a 00 00  |................|
00001210  00 e2 00 8b 00 00 00 de  00 8b 00 00 00 de 00 8b  |................|
00001220  00 00 00 dc 00 89 00 00  00 da 00 8b 00 00 00 e0  |................|
00001230  00 89 00 00 00 e4 00 8a  00 00 00 e7 00 8b 00 00  |................|
00001240  00 e6 00 8b 00 00 00 e2  00 8c 00 00 00 e1 00 8c  |................|
00001250  00 00 00 df 00 8b 00 00  00 dd 00 8b 00 00 00 00  |................|
00001260  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00001280  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 4c  |...............L|
00001290  54 68 78 8c a0 b4 c5 4c  54 68 78 8c a0 b4 c5 4c  |Thx....LThx....L|
000012a0  54 68 78 8c a0 b4 c5 26  20 1e 1c 26 20 1e 1c 26  |Thx....& ..& ..&|
000012b0  20 1e 1c 26 20 1e 1c 26  20 1e 1c 26 20 1e 1c 26  | ..& ..& ..& ..&|
000012c0  20 1e 1c 26 20 1e 1c 26  22 20 1e 1c 1a 20 1e 1c  | ..& ..&" ... ..|
000012d0  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
000012e0  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
000012f0  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001300  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001310  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001320  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
00001330  1e 1c 1a 00 00 00 00 26  22 20 1e 1c 1a 20 1e 1c  |.......&" ... ..|
00001340  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
00001350  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
00001360  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001370  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001380  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001390  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
000013a0  1e 1c 1a 00 00 00 00 10  16 18 40 46 48 30 36 38  |..........@FH068|
000013b0  4c 54 68 78 8c a0 b9 cd  4c 54 68 78 8c a0 b9 cd  |LThx....LThx....|
*
000013f0  4c 54 68 78 8c a0 b9 cd  3c 7c 3c 7c 3c 7c 3c 7c  |LThx....<|<|<|<||
00001400  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
00001440  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
17.11.20181955Base systemBug ReportVery LowLowUbiquiti EdgeRouter X initramfs-factory.tarTrunkUnconfirmed Task Description

On https://openwrt.org/toh/ubiquiti/ubiquiti_edgerouter_x_er-x_ka there is an explanation of how to install OpenWRT on an EdgeRouter X using the tools that are standard installed on it and are used by Ubiquiti to upgrade the firmware. It seems as part of the build process a openwrt-ramips-mt7621-ubnt-erx-initramfs-factory.tar file is generated that can be used for that. But it seems you can not download it from the official site, you need to build it yourself. On the official site is an openwrt-18.06.1-ramips-mt7621-ubnt-erx-initramfs-kernel.bin file. I think that file can be used for installing using tftp, but it can’t be used with the Ubiquiti tools. Can the initramfs-factory.tar be made available to download?

21.11.2016296Base systemBug ReportVery LowHighUbiquiti Bullet M 10/100 ethernet interface comes up as...TrunkUnconfirmed Task Description

For the last month or so, and persisting in r2248, when a Ubiquiti Bullet M is booted through typical Ubiquiti 10/100 passive PoE injector, the interface appears to come up in gigabit mode (see timestamp 18.990274 below), despite being only a 10/100 Mbps interface. Restarting /etc/init.d/network fixes it. I am running batman-adv over the ethernet interface, which may be involved. I will check if it happens when batman-adv is not used on the interface and report in a followup comment.

The dmesg look like this:

[    0.000000] Linux version 4.4.32 (openwrt@hawg) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1439) ) #0 Mon Nov 21 07:14:51 2016
[    0.000000] MyLoader: sysp=00030800, boardp=088201a0, parts=fdeffeff
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7240 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80412320, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=UBNT-BM mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 27616K/32768K available (2990K kernel code, 174K rwdata, 756K rodata, 296K init, 198K bss, 5152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
[    0.000013] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
[    0.007858] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
[    0.080537] pid_max: default: 32768 minimum: 301
[    0.085319] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091915] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102739] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113516] NET: Registered protocol family 16
[    0.120053] MIPS: machine is Ubiquiti Bullet M
[    0.126714] registering PCI controller with io_map_base unset
[    0.357171] PCI host bridge to bus 0000:00
[    0.361273] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.368174] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.373719] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.380486] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.388422] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[    0.388466] pci 0000:00:00.0: fixup device configuration
[    0.395018] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    0.395154] pci 0000:00:00.0: supports D1
[    0.395179] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.395521] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.395573] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    0.402864] pci 0000:00:00.0: using irq 40 for pin 1
[    0.408959] clocksource: Switched to clocksource MIPS
[    0.415845] NET: Registered protocol family 2
[    0.421435] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.428393] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.434796] TCP: Hash tables configured (established 1024 bind 1024)
[    0.441291] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.447126] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.453786] NET: Registered protocol family 1
[    0.458221] PCI: CLS 0 bytes, default 32
[    0.464223] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.470512] Crashlog allocated RAM at address 0x1f00000
[    0.495166] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.501050] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.514332] io scheduler noop registered
[    0.518252] io scheduler deadline registered (default)
[    0.523724] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.530709] console [ttyS0] disabled
[    0.554342] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12187500) is a 16550A
[    0.563020] console [ttyS0] enabled
[    0.570030] bootconsole [early0] disabled
[    0.582486] m25p80 spi0.0: found mx25l6405d, expected m25p80
[    0.588201] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.593207] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.599160] Creating 5 MTD partitions on "spi0.0":
[    0.603978] 0x000000000000-0x000000040000 : "u-boot"
[    0.611975] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.619659] 0x000000050000-0x0000007b0000 : "firmware"
[    0.638850] 2 uimage-fw partitions found on MTD device firmware
[    0.644866] 0x000000050000-0x0000001a0000 : "kernel"
[    0.651748] 0x0000001a0000-0x0000007b0000 : "rootfs"
[    0.658927] mtd: device 4 (rootfs) set to be root filesystem
[    0.664753] 1 squashfs-split partitions found on MTD device rootfs
[    0.671002] 0x000000550000-0x0000007b0000 : "rootfs_data"
[    0.678725] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.685799] 0x0000007f0000-0x000000800000 : "EEPROM"
[    0.713743] libphy: ag71xx_mdio: probed
[    1.302694] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
[    1.312905] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.322158] NET: Registered protocol family 10
[    1.332118] NET: Registered protocol family 17
[    1.336691] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.349583] 8021q: 802.1Q VLAN Support v1.8
[    1.362372] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.372025] Freeing unused kernel memory: 296K (80436000 - 80480000)
[    2.887723] init: Console is alive
[    2.891524] init: - watchdog -
[    4.278153] usbcore: registered new interface driver usbfs
[    4.283867] usbcore: registered new interface driver hub
[    4.289377] usbcore: registered new device driver usb
[    4.301662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.310384] ehci-platform: EHCI generic platform driver
[    4.319460] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.327414] ohci-platform: OHCI generic platform driver
[    4.336259] init: - preinit -
[    5.148878] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.181862] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    7.440590] eth0: link up (100Mbps/Full duplex)
[    7.445184] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.484066] jffs2: notice: (361) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.501955] mount_root: switching to jffs2 overlay
[    8.517794] urandom-seed: Seeding with /etc/urandom.seed
[    8.794632] eth0: link down
[    8.814035] procd: - early -
[    8.817063] procd: - watchdog -
[    9.492101] procd: - ubus -
[    9.545805] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.555498] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.564637] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.574254] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.583375] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.593373] random: ubusd: uninitialized urandom read (4 bytes read, 16 bits of entropy available)
[    9.602738] random: ubusd: uninitialized urandom read (4 bytes read, 16 bits of entropy available)
[    9.612394] procd: - init -
[   10.066368] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[   10.074041] Backport generated by backports.git backports-20160324-9-g0e38f5c
[   10.125220] batman_adv: B.A.T.M.A.N. advanced 2016.4 (compatibility version 15) loaded
[   10.213939] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   10.224958] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[   10.233630] ath: EEPROM regdomain: 0x0
[   10.233647] ath: EEPROM indicates default country code should be used
[   10.233661] ath: doing EEPROM country->regdmn map search
[   10.233689] ath: country maps to regdmn code: 0x3a
[   10.233705] ath: Country alpha2 being used: US
[   10.233718] ath: Regpair used: 0x3a
[   10.248634] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.257391] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   11.870351] random: jshn: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   12.001559] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   18.855427] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.875510] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[   18.990274] eth0: link up (1000Mbps/Full duplex)
[   18.994964] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.330349] batman_adv: bat0: Adding interface: eth0
[   19.335365] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[   19.359419] batman_adv: bat0: Interface activated: eth0
[   19.367077] 8021q: adding VLAN 0 to HW filter on device bat0
[   19.406417] device bat0 entered promiscuous mode
[   19.411309] br-pub: port 1(bat0) entered forwarding state
[   19.416772] br-pub: port 1(bat0) entered forwarding state
[   19.422579] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[   19.870508] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[   20.359133] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[   20.367269] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[   21.412169] br-pub: port 1(bat0) entered forwarding state
[   21.549966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.563679] device wlan0 entered promiscuous mode
[   21.591315] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.597879] br-pub: port 2(wlan0) entered forwarding state
[   21.603541] br-pub: port 2(wlan0) entered forwarding state
[   21.784924] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[   21.912131] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[   22.268273] batman_adv: bat0: Adding interface: mesh0
[   22.273432] batman_adv: bat0: Interface activated: mesh0
[   23.599046] br-pub: port 2(wlan0) entered forwarding state
[   29.369162] batman_adv: bat0: IGMP Querier appeared
[   29.374093] batman_adv: bat0: MLD Querier appeared
[   34.068975] ------------[ cut here ]------------
[   34.073700] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:306 dev_watchdog+0x1dc/0x260()
[   34.082197] NETDEV WATCHDOG: eth0 (ag71xx): transmit queue 0 timed out
[   34.088754] Modules linked in: ath9k ath9k_common mac80211 ath9k_hw ath batman_adv libcrc32c cfg80211 compat ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16
 cryptomgr aead crypto_null crc32c_generic crypto_hash
[   34.112252] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.32 #0
[   34.118013] Stack : 803c8fc4 00000000 00000001 80420000 80413038 80412cc3 803aa67c 00000000
[   34.118013] 	  8048379c 8041135c 00000200 00100000 0000000a 800a71a8 803afce8 80410000
[   34.118013] 	  00000003 8041135c 803ae0f4 8040dc2c 0000000a 800a5124 00000006 00000000
[   34.118013] 	  00000000 801f3100 00000000 00000000 00000000 00000000 00000000 00000000
[   34.118013] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   34.118013] 	  ...
[   34.153969] Call Trace:
[   34.156440] [<80071af0>] show_stack+0x50/0x84
[   34.160843] [<80081870>] warn_slowpath_common+0xa0/0xd0
[   34.166096] [<800818cc>] warn_slowpath_fmt+0x2c/0x38
[   34.171111] [<80290970>] dev_watchdog+0x1dc/0x260
[   34.175854] [<800b0460>] call_timer_fn.isra.5+0x24/0x80
[   34.181125] [<800b06e4>] run_timer_softirq+0x1b4/0x1fc
[   34.186296] [<80083dec>] __do_softirq+0x250/0x298
[   34.191059] [<8006a5d0>] plat_irq_dispatch+0xd4/0x10c
[   34.196134] [<80060830>] ret_from_irq+0x0/0x4
[   34.200526] [<80060a80>] __r4k_wait+0x20/0x40
[   34.204906] [<800a2304>] cpu_startup_entry+0x9c/0xe8
[   34.209934] [<80436bd4>] start_kernel+0x470/0x490
[   34.214656] 
[   34.216159] ---[ end trace ef06a4b3ec78272a ]---
[   34.220810] eth0: tx timeout
[   37.565193] random: nonblocking pool is initialized
[   44.068999] eth0: tx timeout
[   54.069064] eth0: tx timeout
[   64.068993] eth0: tx timeout
[   74.069871] eth0: tx timeout
[   82.660973] batman_adv: bat0: MLD Querier disappeared - multicast optimizations disabled
[   84.070901] eth0: tx timeout
[   92.701961] batman_adv: bat0: MLD Querier appeared
[   94.071717] eth0: tx timeout
[  104.072355] eth0: tx timeout
[  114.072669] eth0: tx timeout
[...]

When I do an /etc/init.d/network restart, the interface recovers to normal function, and I get this in dmesg:

[ 1296.763793] br-pub: port 2(wlan0) entered disabled state
[ 1296.769232] br-pub: port 1(bat0) entered disabled state
[ 1296.808305] device bat0 left promiscuous mode
[ 1296.812986] br-pub: port 1(bat0) entered disabled state
[ 1296.862085] IPv6: ADDRCONF(NETDEV_UP): bat0: link is not ready
[ 1296.879239] device wlan0 left promiscuous mode
[ 1296.883945] br-pub: port 2(wlan0) entered disabled state
[ 1296.904196] batman_adv: bat0: Interface deactivated: mesh0
[ 1296.909752] batman_adv: bat0: Removing interface: mesh0
[ 1296.963462] batman_adv: bat0: Interface deactivated: eth0
[ 1296.993492] eth0: link down
[ 1296.998705] batman_adv: bat0: Removing interface: eth0
[ 1301.629484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1301.649941] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[ 1301.985100] eth0: link up (100Mbps/Full duplex)
[ 1301.989698] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1302.191373] batman_adv: bat0: Adding interface: eth0
[ 1302.196453] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[ 1302.220488] batman_adv: bat0: Interface activated: eth0
[ 1302.228092] 8021q: adding VLAN 0 to HW filter on device bat0
[ 1302.275944] device bat0 entered promiscuous mode
[ 1302.280747] br-pub: port 1(bat0) entered forwarding state
[ 1302.286292] br-pub: port 1(bat0) entered forwarding state
[ 1302.292106] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[ 1302.590333] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[ 1303.213417] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[ 1303.221556] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[ 1304.283452] br-pub: port 1(bat0) entered forwarding state
[ 1304.672382] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1304.782643] device wlan0 entered promiscuous mode
[ 1304.827845] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1304.834479] br-pub: port 2(wlan0) entered forwarding state
[ 1304.840053] br-pub: port 2(wlan0) entered forwarding state
[ 1305.112607] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[ 1305.190600] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[ 1305.692918] batman_adv: bat0: Adding interface: mesh0
[ 1305.698080] batman_adv: bat0: Interface activated: mesh0
[ 1306.833410] br-pub: port 2(wlan0) entered forwarding state
[ 1312.303688] batman_adv: bat0: IGMP Querier appeared
[ 1312.308629] batman_adv: bat0: MLD Querier appeared

If I disconnect the other end of the ethernet cable so that there is no link peer, I do not see the problem (see below):

[    0.000000] Linux version 4.4.32 (openwrt@hawg) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1439) ) #0 Mon Nov 21 07:14:51 2016
[    0.000000] MyLoader: sysp=00000000, boardp=00000000, parts=ffffffff
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7240 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80412320, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=UBNT-BM mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 27616K/32768K available (2990K kernel code, 174K rwdata, 756K rodata, 296K init, 198K bss, 5152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
[    0.000013] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
[    0.007859] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
[    0.080537] pid_max: default: 32768 minimum: 301
[    0.085319] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091915] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113517] NET: Registered protocol family 16
[    0.120061] MIPS: machine is Ubiquiti Bullet M
[    0.126721] registering PCI controller with io_map_base unset
[    0.357179] PCI host bridge to bus 0000:00
[    0.361281] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.368182] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.373728] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.380495] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.388431] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[    0.388474] pci 0000:00:00.0: fixup device configuration
[    0.395026] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    0.395163] pci 0000:00:00.0: supports D1
[    0.395187] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.395530] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.395581] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    0.402872] pci 0000:00:00.0: using irq 40 for pin 1
[    0.408968] clocksource: Switched to clocksource MIPS
[    0.415854] NET: Registered protocol family 2
[    0.421444] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.428402] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.434805] TCP: Hash tables configured (established 1024 bind 1024)
[    0.441299] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.447134] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.453795] NET: Registered protocol family 1
[    0.458229] PCI: CLS 0 bytes, default 32
[    0.464231] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.470521] Crashlog allocated RAM at address 0x1f00000
[    0.495175] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.501058] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.514341] io scheduler noop registered
[    0.518261] io scheduler deadline registered (default)
[    0.523733] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.530718] console [ttyS0] disabled
[    0.554351] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12187500) is a 16550A
[    0.563030] console [ttyS0] enabled
[    0.570040] bootconsole [early0] disabled
[    0.582496] m25p80 spi0.0: found mx25l6405d, expected m25p80
[    0.588212] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.593216] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.599171] Creating 5 MTD partitions on "spi0.0":
[    0.603989] 0x000000000000-0x000000040000 : "u-boot"
[    0.611984] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.619662] 0x000000050000-0x0000007b0000 : "firmware"
[    0.638852] 2 uimage-fw partitions found on MTD device firmware
[    0.644868] 0x000000050000-0x0000001a0000 : "kernel"
[    0.651750] 0x0000001a0000-0x0000007b0000 : "rootfs"
[    0.658926] mtd: device 4 (rootfs) set to be root filesystem
[    0.664753] 1 squashfs-split partitions found on MTD device rootfs
[    0.671004] 0x000000550000-0x0000007b0000 : "rootfs_data"
[    0.678725] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.685800] 0x0000007f0000-0x000000800000 : "EEPROM"
[    0.713752] libphy: ag71xx_mdio: probed
[    1.302703] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
[    1.312917] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.322177] NET: Registered protocol family 10
[    1.332146] NET: Registered protocol family 17
[    1.336720] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.349611] 8021q: 802.1Q VLAN Support v1.8
[    1.362390] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.372040] Freeing unused kernel memory: 296K (80436000 - 80480000)
[    2.887726] init: Console is alive
[    2.891520] init: - watchdog -
[    4.278086] usbcore: registered new interface driver usbfs
[    4.283799] usbcore: registered new interface driver hub
[    4.289318] usbcore: registered new device driver usb
[    4.301475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.310215] ehci-platform: EHCI generic platform driver
[    4.319363] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.327317] ohci-platform: OHCI generic platform driver
[    4.336163] init: - preinit -
[    5.148612] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.181619] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    8.484735] jffs2: notice: (361) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.502585] mount_root: switching to jffs2 overlay
[    8.518273] urandom-seed: Seeding with /etc/urandom.seed
[    8.810840] procd: - early -
[    8.813863] procd: - watchdog -
[    9.487850] procd: - ubus -
[    9.541721] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.551409] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.560553] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.570163] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.579297] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.589333] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.598611] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
[    9.608223] procd: - init -
[   10.064115] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[   10.071796] Backport generated by backports.git backports-20160324-9-g0e38f5c
[   10.122372] batman_adv: B.A.T.M.A.N. advanced 2016.4 (compatibility version 15) loaded
[   10.205329] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   10.216362] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[   10.225034] ath: EEPROM regdomain: 0x0
[   10.225051] ath: EEPROM indicates default country code should be used
[   10.225065] ath: doing EEPROM country->regdmn map search
[   10.225093] ath: country maps to regdmn code: 0x3a
[   10.225109] ath: Country alpha2 being used: US
[   10.225122] ath: Regpair used: 0x3a
[   10.240049] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.248689] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   11.861887] random: jshn: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   11.993063] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[   18.833441] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.855566] IPv6: ADDRCONF(NETDEV_UP): br-pub: link is not ready
[   21.215610] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.255512] device wlan0 entered promiscuous mode
[   21.286637] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.293301] br-pub: port 1(wlan0) entered forwarding state
[   21.298864] br-pub: port 1(wlan0) entered forwarding state
[   21.335689] IPv6: ADDRCONF(NETDEV_CHANGE): br-pub: link becomes ready
[   21.541225] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[   21.594616] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[   22.284927] batman_adv: bat0: Adding interface: mesh0
[   22.290148] batman_adv: bat0: Interface activated: mesh0
[   22.297750] 8021q: adding VLAN 0 to HW filter on device bat0
[   22.362868] device bat0 entered promiscuous mode
[   22.367627] br-pub: port 2(bat0) entered forwarding state
[   22.373200] br-pub: port 2(bat0) entered forwarding state
[   22.718089] batman_adv: bat0: bridge_loop_avoidance: Changing from: enabled to: disabled
[   23.289035] br-pub: port 1(wlan0) entered forwarding state
[   23.309325] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[   23.317459] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[   24.369054] br-pub: port 2(bat0) entered forwarding state
[   29.389161] batman_adv: bat0: IGMP Querier appeared
[   38.069058] random: nonblocking pool is initialized
[   44.920666] eth0: link up (100Mbps/Full duplex)
[   44.925732] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   45.001214] batman_adv: bat0: Adding interface: eth0
[   45.006233] batman_adv: bat0: The MTU of interface eth0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the
 performance. Setting the MTU to 1532 would solve the problem.
[   45.030291] batman_adv: bat0: Interface activated: eth0
[   50.459193] batman_adv: bat0: MLD Querier appeared
[   67.509156] batman_adv: bat0: MLD Querier disappeared - multicast optimizations disabled
[   77.549128] batman_adv: bat0: MLD Querier appeared

My LEDE diffconfig looks like this:

CONFIG_TARGET_ar71xx=y
CONFIG_TARGET_ar71xx_generic=y
CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-bullet-m=y
CONFIG_DEVEL=y
CONFIG_BUSYBOX_CUSTOM=y
CONFIG_ALFRED_NEEDS_lua=y
CONFIG_BUILD_LOG=y
CONFIG_BUSYBOX_CONFIG_MESG=y
CONFIG_BUSYBOX_CONFIG_PKILL=y
CONFIG_BUSYBOX_CONFIG_RDATE=y
# CONFIG_BUSYBOX_CONFIG_SHA256SUM is not set
CONFIG_KMOD_BATMAN_ADV_BATMAN_V=y
CONFIG_KMOD_BATMAN_ADV_BLA=y
CONFIG_KMOD_BATMAN_ADV_DAT=y
CONFIG_KMOD_BATMAN_ADV_DEBUGFS=y
CONFIG_KMOD_BATMAN_ADV_MCAST=y
CONFIG_LIBCURL_COOKIES=y
CONFIG_LIBCURL_FILE=y
CONFIG_LIBCURL_FTP=y
CONFIG_LIBCURL_HTTP=y
CONFIG_LIBCURL_NO_SMB="!"
CONFIG_LIBCURL_POLARSSL=y
CONFIG_LIBCURL_PROXY=y
CONFIG_OPENSSL_ENGINE_CRYPTO=y
CONFIG_OPENSSL_WITH_DEPRECATED=y
CONFIG_OPENSSL_WITH_EC=y
CONFIG_OPENSSL_WITH_NPN=y
CONFIG_OPENSSL_WITH_PSK=y
CONFIG_OPENSSL_WITH_SRP=y
CONFIG_PACKAGE_ALFRED_BATHOSTS=y
CONFIG_PACKAGE_ALFRED_VIS=y
CONFIG_PACKAGE_alfred=y
CONFIG_PACKAGE_batctl=y
CONFIG_PACKAGE_bridge=y
CONFIG_PACKAGE_curl=y
CONFIG_PACKAGE_diffutils=y
# CONFIG_PACKAGE_dnsmasq is not set
# CONFIG_PACKAGE_firewall is not set
CONFIG_PACKAGE_horst=y
CONFIG_PACKAGE_iftop=y
# CONFIG_PACKAGE_ip6tables is not set
CONFIG_PACKAGE_iperf3=y
# CONFIG_PACKAGE_iptables is not set
CONFIG_PACKAGE_kmod-batman-adv=y
CONFIG_PACKAGE_kmod-bridge=y
CONFIG_PACKAGE_kmod-crypto-aead=y
CONFIG_PACKAGE_kmod-crypto-crc32c=y
CONFIG_PACKAGE_kmod-crypto-hash=y
CONFIG_PACKAGE_kmod-crypto-manager=y
CONFIG_PACKAGE_kmod-crypto-null=y
CONFIG_PACKAGE_kmod-crypto-pcompress=y
# CONFIG_PACKAGE_kmod-ip6tables is not set
# CONFIG_PACKAGE_kmod-ipt-conntrack is not set
# CONFIG_PACKAGE_kmod-ipt-core is not set
# CONFIG_PACKAGE_kmod-ipt-nat is not set
# CONFIG_PACKAGE_kmod-lib-crc-ccitt is not set
CONFIG_PACKAGE_kmod-lib-crc16=y
CONFIG_PACKAGE_kmod-lib-crc32c=y
CONFIG_PACKAGE_kmod-llc=y
# CONFIG_PACKAGE_kmod-nf-conntrack is not set
# CONFIG_PACKAGE_kmod-nf-conntrack6 is not set
# CONFIG_PACKAGE_kmod-nf-ipt is not set
# CONFIG_PACKAGE_kmod-nf-ipt6 is not set
# CONFIG_PACKAGE_kmod-nf-nat is not set
# CONFIG_PACKAGE_kmod-ppp is not set
CONFIG_PACKAGE_kmod-stp=y
CONFIG_PACKAGE_libcurl=y
# CONFIG_PACKAGE_libip4tc is not set
# CONFIG_PACKAGE_libip6tc is not set
CONFIG_PACKAGE_liblua=y
CONFIG_PACKAGE_libncursesw=y
CONFIG_PACKAGE_libnetsnmp=y
CONFIG_PACKAGE_libopenssl=y
CONFIG_PACKAGE_libpcap=y
CONFIG_PACKAGE_libpcre=y
CONFIG_PACKAGE_libpolarssl=y
CONFIG_PACKAGE_libpopt=y
CONFIG_PACKAGE_libpthread=y
CONFIG_PACKAGE_librt=y
# CONFIG_PACKAGE_libxtables is not set
CONFIG_PACKAGE_lua=y
# CONFIG_PACKAGE_odhcp6c is not set
# CONFIG_PACKAGE_odhcpd is not set
# CONFIG_PACKAGE_ppp is not set
CONFIG_PACKAGE_procps-ng=y
CONFIG_PACKAGE_procps-ng-free=y
CONFIG_PACKAGE_procps-ng-kill=y
CONFIG_PACKAGE_procps-ng-pgrep=y
CONFIG_PACKAGE_procps-ng-pkill=y
CONFIG_PACKAGE_procps-ng-pmap=y
CONFIG_PACKAGE_procps-ng-ps=y
CONFIG_PACKAGE_procps-ng-pwdx=y
CONFIG_PACKAGE_procps-ng-skill=y
CONFIG_PACKAGE_procps-ng-slabtop=y
CONFIG_PACKAGE_procps-ng-snice=y
CONFIG_PACKAGE_procps-ng-tload=y
CONFIG_PACKAGE_procps-ng-top=y
CONFIG_PACKAGE_procps-ng-uptime=y
CONFIG_PACKAGE_procps-ng-vmstat=y
CONFIG_PACKAGE_procps-ng-w=y
CONFIG_PACKAGE_procps-ng-watch=y
CONFIG_PACKAGE_ptp-utils=y
CONFIG_PACKAGE_rsync=y
CONFIG_PACKAGE_snmpd=y
CONFIG_PACKAGE_tcpdump=y
CONFIG_PACKAGE_terminfo=y
CONFIG_PACKAGE_wget=y
CONFIG_PACKAGE_wireless-tools=y
CONFIG_PACKAGE_zlib=y
CONFIG_RSYNC_zlib=y

My uci show looks like this (system and wireless elided):

alfred.alfred=alfred
alfred.alfred.mode='master'
alfred.alfred.batmanif='bat0'
alfred.alfred.start_vis='1'
alfred.alfred.run_facters='1'
alfred.alfred.interface='br-pub'
alfred.alfred.disabled='0'
batman-adv.bat0=mesh
batman-adv.bat0.bridge_loop_avoidance='0'
dropbear.@dropbear[0]=dropbear
dropbear.@dropbear[0].PasswordAuth='on'
dropbear.@dropbear[0].RootPasswordAuth='on'
dropbear.@dropbear[0].Port='22'
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.pub=interface
network.pub.type='bridge'
network.pub.proto='static'
network.pub.ip6assign='60'
network.pub.ifname='bat0'
network.pub.ipaddr='10.11.x.y'
network.pub.netmask='255.255.252.0'
network.pub.gateway='10.11.x.1'
network.pub.dns='10.11.x.1'
network.mesh=interface
network.mesh.mtu='1532'
network.mesh.proto='batadv'
network.mesh.mesh='bat0'
network.meshwire=interface
network.meshwire.proto='batadv'
network.meshwire.mesh='bat0'
network.meshwire.ifname='eth0'
18.05.20203109Base systemBug ReportVery LowCriticalUBIFS failure/crash on BT HomeHub 2B: __nand_correct_da...openwrt-19.07Unconfirmed Task Description

Device: BT HomeHub Version 2B (Lantiq XWAY)

Software: 19.07.3 downloaded from:

https://downloads.openwrt.org/releases/19.07.3/targets/lantiq/xway/openwrt-19.07.3-lantiq-xway-bt_homehub-v2b-squashfs-sysupgrade.bin

After an hour or so of usage, the router reboots itself with a corrupted filesystem. I’ve attached the log to this bug report. The log contains:

__nand_correct_data: uncorrectable ECC error

so I think there might be a link with the similar problem that the BT HomeHub Version 5A had a long time ago, as per:

https://bugs.openwrt.org/index.php?do=details&task_id=245 (”Lede won’t boot on HHB5”)

and

http://openwrt.ebilan.co.uk/viewtopic.php?f=7&t=133#p1022 (post by Mathias Kresin / mkresin who fixed the problem with the Home Hub 5A)

This bug may also be related to:

https://bugs.openwrt.org/index.php?do=details&task_id=1842

(I think that this bug may affect every release since 18.06.0)

28.03.20192208KernelBug ReportVery LowMediumUAS support for USB3.0 drivesopenwrt-19.07Unconfirmed Task Description

UAS module is loaded fine on Linksys WRT3200ACM with openwrt 18.06 but when plugging a USB 3.0 drive (for example a USB 3.0 external HDD) it does not load in the right way and device ends using driver usb-storage, which prevents of using device at full speed.

Steps to reproduce: Plug a USB 3.0 external HDD to USB 3.0 port of any openwrt 18.06 device and check speed when copying a file to the external HDD, it should be around 100+ MBps

Any needed additional info can be found at this forum question: https://forum.openwrt.org/t/usb3-0-hdd-issues/34031/13


22.07.20203242Base systemBug ReportVery LowHighUAS not working - All devices with USB3.0 affectedAllUnconfirmed Task Description

USB controller “f10f8000.usb3” is preventing UAS from working on OpenWRT devices, as dmesg states:

[ 1.830001] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 1.860632] usb 3-1: USB controller f10f8000.usb3 does not support streams, which are required by the UAS driver.
[ 1.870949] usb 3-1: Please try an other USB controller if you wish to use UAS.
[ 1.878291] usb-storage 3-1:1.0: USB Mass Storage device detected

Checked in OpenWRT 18.04 and 19.03 with Linksys WRT3200ACM and Turris Omnia. This impacts USB3.0 speeds.

To reproduce just hook up a USB3.0 HDD to a OpenWRT device on the USB3.0 port and see dmesg.

Is it possible to try another controller or fix f10f8000.usb3?

14.06.20192320OtherBug ReportVery LowLowu-Boot OpenWrt 18.06.2 on sama5d31 Unimplemented compre...TrunkUnconfirmed Task Description

Hi,
after building 18.06.2 OpenWrt version and his nand flash u-boot (U-Boot 2017.03-linux4sam_5.8 (Jan 30 2019 - 12:21:02 +0000)) when u-boot try to uncompress lzma kernel image the following error is reached

 

Uncompressing Kernel Image ... Unimplemented compression type 3

the log:

AT91Bootstrap 3.8.10 (Tue Jun 11 17:58:40 UTC 2019)

NAND: ONFI flash detected
NAND: Manufacturer ID: 0x2c Chip ID: 0xda
NAND: Page Bytes: 2048, Spare Bytes: 64
NAND: ECC Correctability Bits: 4, ECC Sector Bytes: 512
NAND: Disable On-Die ECC
NAND: Initialize PMECC params, cap: 4, sector: 512
NAND: Image: Copy 0xa0000 bytes from 0×40000 to 0x26f00000
NAND: Done to load image
<debug_uart>

U-Boot 2017.03-linux4sam_5.8 (Jan 30 2019 - 12:21:02 +0000)

CPU: SAMA5D31
Crystal frequency: 12 MHz CPU clock : 528 MHz Master clock : 132 MHz DRAM: 256 MiB
NAND: 256 MiB
MMC: Atmel mci: 0, Atmel mci: 1
In: serial@ffffee00
Out: serial@ffffee00
Err: serial@ffffee00
Net:
Error: ethernet@f0028000 address not set.
No ethernet found.
Hit any key to stop autoboot: 0

NAND read: device 0 offset 0×180000, size 0×80000 524288 bytes read: OK

NAND read: device 0 offset 0×200000, size 0×600000 6291456 bytes read: OK
## Booting kernel from Legacy Image at 22000000 ...

 Image Name:   ARM OpenWrt Linux-4.9.152
 Image Type:   ARM Linux Kernel Image (lzma compressed)
 Data Size:    3016433 Bytes = 2.9 MiB
 Load Address: 20008000
 Entry Point:  20008000
 Verifying Checksum ... OK

## Flattened Device Tree blob at 21000000

 Booting using the fdt blob at 0x21000000
 Uncompressing Kernel Image ... Unimplemented compression type 3

Checking into u-boot (make menuconfig) seems that lzma cannot be set , only LZ4 is provided.

Also the option to change compression type of the kernel do not work. I try to switch from default (gzip) to LZ4 but kernel uimage is always lzma compressed.

Could you provide some hint to unlock the situation ?

Another strange things is :

Error: ethernet@f0028000 address not set.
No ethernet found.

f0028000 is memory address of GMAC that is not provided in sama5d31 SoC but the curious is the next No ethernet found.

Does it mean that nor EMAC was found ?

Thanks in advance
Best
Fabio


06.08.20181745Base systemBug ReportVery LowMediumtxpower config not applied on ath9kTrunkUnconfirmed Task Description

TP-Link TL-MR22U v1
OpenWrt SNAPSHOT r7410-d3a7587 4.9.111

add secondary wifi usb device with AR9271 chipset
configure txpower on primary ath9k interface to some value other than maximum reported
make configurations of secondary device
apply configurations or run command from console: wifi

first interface is set again to max txpower

this issue seems to exist since barrier breaker!

29.08.20181822Base systemBug ReportVery LowMediumTx-Power is alway 0 dBmAllUnconfirmed Task Description

Model HiWiFi HC5661A
Architecture MediaTek MT7628AN ver:1 eco:2
https://downloads.openwrt.org/releases/18.06.1/targets/ramips/mt76x8/openwrt-18.06.1-ramips-mt76x8-hc5661a-squashfs-sysupgrade.bin

can not set tx-power,whether through Luci or iw command, it is always zero.

Model HiWiFi HC5962 also has this problem.
https://downloads.openwrt.org/releases/18.06.1/targets/ramips/mt7621/openwrt-18.06.1-ramips-mt7621-hc5962-squashfs-sysupgrade.bin

20.08.20213983Base systemBug ReportVery LowLowTX Power 2.4GHZ StuckTrunkUnconfirmed Task Description

I’m having a problem with TXPower with my MediaTek 2.4GHz radio on my R6220 Netgear unit flashed with the latest version of OpenWRT, changing the TX power down to 1 dBm all the way down from 20 has no effect on range or RX power seen by devices. The 5GHz radio does not have this problem, and changing the Tx power has a significant effect on both real world range and signal in dBm. I have tried downgrading software with no luck. Any ideas?

- On both 18.06 and 19.07, tried rolling back.
- Tried reflashing to new OS with no luck
- Netgear R6220
- 2.4GHz Radio with TX Power Issues: MediaTek MT7603E 802.11bgn
- 5GHz Radio That Works Fine: MediaTek MT76x2E 802.11acn

Let me know if I can provide more info.

- Aidan

07.09.2016162Base systemBug ReportVery LowLowTwo issues with libuclient-openssl in luci-sslTrunkUnconfirmed Task Description

1: RC4 and 3DES are used when both have security issues. Actually the latter also is true of mbedtls/polarssl.

2: Only TLS 1.2 is supported. This makes multiple clients unable to connect.

BTW, I got this working after modifying the Makefile to luci-ssl to depend on libustream-openssl instead. No idea what the situation is but so far it works without a problem.

27.11.20192636Base systemBug ReportVery LowMediumTurris Onmia: sysupgrade is brokenTrunkUnconfirmed Task Description

I just found that a sysupgrade fails on mvebu_cortexa9 → Turris Omnia using
“OpenWrt SNAPSHOT, r11595-5d2a900163”

Steps to reproduce:
- install OpenWrt master (r11595-5d2a900163) via medkit; hold reset-button on powerup till 4 LEDs are flashing
- wait till OpenWrt is installed
- login
- “cd /tmp” - “wget http://downloads.openwrt.org/snapshots/targets/mvebu/cortexa9/openwrt-mvebu-cortexa9-cznic_turris-omnia-sysupgrade.img.gz” - “sysupgrade -n openwrt-mvebu-cortexa9-cznic_turris-omnia-sysupgrade.img.gz” - following output will come up


root@OpenWrt:/tmp# sysupgrade -n /tmp/openwrt-mvebu-cortexa9-cznic_turris-omnia-
sysupgrade.img.gz
zcat: write error: Broken pipe
zcat: write: Broken pipe
Unable to determine upgrade device
Image check failed.
23.01.20192078KernelBug ReportVery LowLowtty noisy from /etc/hotplug.d/net/10-ar922x-led-fix TrunkUnconfirmed Task Description

Hi,

I think it is just a coding style issue,
but makes tty output noisy when procd debug level selected (3 or 4 for me).

noise examples:


cat: can't open '/sys/devices/virtual/ieee80211/phy*/name': No such file or directory
sh: add: unknown operand

# or

cat: can't open '/sys/devices/virtual/ieee80211/phy*/name': No such file or directory
sh: remove: unknown operand

# times depends on how many hotplug event happened

demo patch below



https://github.com/openwrt/openwrt/blob/master/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix

- phyname=$(cat $phydir/phy*/name)
+ phyname=$(cat $phydir/phy*/name 2>/dev/null)

- [ -z $phyname -o $ACTION != "add" ] && exit 0
+ [ 0 != $? -o -z "$phyname" -o "$ACTION" != "add" ] && exit 0

- [ $phyname -a $ACTION = "add" ] && {
+ [ ! -z "$phyname" -a "$ACTION" == "add" ] && {


10.06.20203170Base systemBug ReportVery LowLowtty features or permissions incompatible with tmuxTrunkUnconfirmed Task Description

replicated :

on x86_64 VM: LEDE, 18.06.x, 19.07.x, snapshot
mips Malta VM (be): snapshot

on serial (-nographic) and graphic terminal

tmux does not show input/output but works

replicate:
- install tmux
- run tmux
- input/output is send to tmux , visible via a ssh connected tmux instance (which works fine)

“hotfix”:
start screen then start tmux and tmux functions as expected

ticket: https://github.com/openwrt/packages/issues/5721

 


24.03.20213705Base systemBug ReportVery LowLowTrunk: WAN via NCM fails silently every 24 hours after ...TrunkUnconfirmed Task Description

Device: BTHH5a - Lantiq XRX200
Build: Trunk 23.03.21
Reproduce: Occurs every 24 hours

I build trunk to help find regressions.

In the last week I noticed NCM fails silently every 24 hours after flashing on a BTHH5a. Lease time is several days. This is new behavior.

I made a shell script to do a ping check on 3 nameservers to detect and restart WAN>

I predict it will fail again tomorrow at 16:36.

Any clues to more debugging from the NCM subsystem?

Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.524923] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.546637] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.555560] printk: console [ttyLTQ0] enabled
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.564285] printk: bootconsole [early0] disabled
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.577617] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.582607] nand: AMD/Spansion S34ML01G1
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.586556] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.594819] Bad block table found at page 65472, version 0x01
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.600883] Bad block table found at page 65408, version 0x01
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    0.605938] 4 fixed-partitions partitions found on MTD device 14000000.flash
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    0.612599] Creating 4 MTD partitions on "14000000.flash":
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    0.618093] 0x000000000000-0x0000000a0000 : "u-boot"
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    0.624987] 0x0000000a0000-0x0000000c0000 : "u-boot-env"
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    0.630969] 0x0000000c0000-0x000000100000 : "unused"
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    0.636457] 0x000000100000-0x000007f80000 : "ubi"
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.645077] libphy: Fixed MDIO Bus: probed
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.659563] NET: Registered protocol family 10
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.667008] Segment Routing with IPv6
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.669336] NET: Registered protocol family 17
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.673908] 8021q: 802.1Q VLAN Support v1.8
Tue Mar 23 15:04:05 2021 kern.err kernel: [    0.683515] pcie-xrx200 1d900000.pcie: failed to get the PCIe PHY
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.795893] libphy: lantiq,xrx200-mdio: probed
Tue Mar 23 15:04:05 2021 kern.warn kernel: [    0.805972] net-xrx200: invalid MAC, using random
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.809940] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:00: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:00, irq=POLL)
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.825543] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:01: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:01, irq=POLL)
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.840996] Intel XWAY PHY11G (xRX v1.2 integrated) 0:11: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:11, irq=POLL)
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.854746] Intel XWAY PHY11G (xRX v1.2 integrated) 0:13: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:13, irq=POLL)
Tue Mar 23 15:04:05 2021 kern.info kernel: [    0.868503] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:05: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:05, irq=POLL)
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.014189] PCI host bridge /fpi@10000000/pcie@d900000 ranges:
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.018835] PCI host bridge to bus 0000:01
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.022731] pci_bus 0000:01: root bus resource [mem 0x1c000000-0x1cffffff]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.029597] pci_bus 0000:01: root bus resource [io  0x1d800000-0x1d8fffff]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.036462] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.043247] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.051218] pci 0000:01:00.0: [1bef:0011] type 01 class 0x060000
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.057191] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.075009] pci 0000:01:00.0: ifx_pcie_rc_class_early_fixup+0x0/0x7c took 17350 usecs
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.081558] pci 0000:01:00.0: PME# supported from D0 D3hot
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.090116] pci 0000:01:00.0: bridge configuration invalid ([bus 02-00]), reconfiguring
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.097044] pci 0000:02:00.0: [168c:003c] type 00 class 0x028000
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.102817] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.109583] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.116354] pci 0000:02:00.0: supports D1 D2
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.123637] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.128881] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 02
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.135500] pci 0000:01:00.0: BAR 8: assigned [mem 0x1c000000-0x1c1fffff]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.142270] pci 0000:01:00.0: BAR 9: assigned [mem 0x1c200000-0x1c2fffff pref]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.149488] pci 0000:02:00.0: BAR 0: assigned [mem 0x1c000000-0x1c1fffff 64bit]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.156820] pci 0000:02:00.0: BAR 6: assigned [mem 0x1c200000-0x1c20ffff pref]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.164012] pci 0000:01:00.0: PCI bridge to [bus 02]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.168989] pci 0000:01:00.0:   bridge window [mem 0x1c000000-0x1c1fffff]
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.175777] pci 0000:01:00.0:   bridge window [mem 0x1c200000-0x1c2fffff pref]
Tue Mar 23 15:04:05 2021 kern.warn kernel: [    1.183147] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
Tue Mar 23 15:04:05 2021 kern.warn kernel: [    1.189584] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.195879] pcieport 0000:01:00.0: enabling device (0000 -> 0002)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.203464] UBI: auto-attach mtd3
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.205354] ubi0: attaching mtd3
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.357514] ubi0: scanning is finished
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.374033] ubi0: attached mtd3 (name "ubi", size 126 MiB)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.378136] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.385029] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.391699] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.398488] ubi0: good PEBs: 1012, bad PEBs: 0, corrupted PEBs: 0
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.404563] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.411813] ubi0: max/mean erase counter: 1092/814, WL threshold: 4096, image sequence number: 228104625
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.421283] ubi0: available PEBs: 0, total reserved PEBs: 1012, PEBs reserved for bad PEB handling: 20
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.430682] ubi0: background thread "ubi_bgt0d" started, PID 471
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.438869] block ubiblock0_1: created from ubi0:1(rootfs)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    1.443017] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.457274] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.466953] Freeing unused kernel memory: 1244K
Tue Mar 23 15:04:05 2021 kern.warn kernel: [    1.470098] This architecture does not have kernel memory protection.
Tue Mar 23 15:04:05 2021 kern.info kernel: [    1.476515] Run /sbin/init as init process
Tue Mar 23 15:04:05 2021 user.info kernel: [    2.113559] init: Console is alive
Tue Mar 23 15:04:05 2021 user.info kernel: [    2.115960] init: - watchdog -
Tue Mar 23 15:04:05 2021 user.info kernel: [    3.754070] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    3.829501] SCSI subsystem initialized
Tue Mar 23 15:04:05 2021 kern.warn kernel: [    3.842821] dwc2 1e101000.usb: 1e101000.usb supply vusb_d not found, using dummy regulator
Tue Mar 23 15:04:05 2021 kern.warn kernel: [    3.849870] dwc2 1e101000.usb: 1e101000.usb supply vusb_a not found, using dummy regulator
Tue Mar 23 15:04:05 2021 kern.info kernel: [    3.959564] dwc2 1e101000.usb: DWC OTG Controller
Tue Mar 23 15:04:05 2021 kern.info kernel: [    3.962941] dwc2 1e101000.usb: new USB bus registered, assigned bus number 1
Tue Mar 23 15:04:05 2021 kern.info kernel: [    3.969986] dwc2 1e101000.usb: irq 62, io mem 0x1e101000
Tue Mar 23 15:04:05 2021 kern.info kernel: [    3.977039] hub 1-0:1.0: USB hub found
Tue Mar 23 15:04:05 2021 kern.info kernel: [    3.979562] hub 1-0:1.0: 1 port detected
Tue Mar 23 15:04:05 2021 kern.info kernel: [    3.989718] usbcore: registered new interface driver usb-storage
Tue Mar 23 15:04:05 2021 user.info kernel: [    3.995061] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Tue Mar 23 15:04:05 2021 user.info kernel: [    4.012149] init: - preinit -
Tue Mar 23 15:04:05 2021 kern.notice kernel: [    5.519932] random: procd: uninitialized urandom read (4 bytes read)
Tue Mar 23 15:04:05 2021 user.info kernel: [    9.824350] mount_root: loading kmods from internal overlay
Tue Mar 23 15:04:05 2021 user.info kernel: [    9.879272] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Tue Mar 23 15:04:05 2021 user.info kernel: [    9.887320] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.236622] UBIFS (ubi0:2): Mounting in unauthenticated mode
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.241278] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 569
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.367666] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.374123] UBIFS (ubi0:2): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.384034] UBIFS (ubi0:2): FS size: 117411840 bytes (111 MiB, 910 LEBs), journal size 5935104 bytes (5 MiB, 46 LEBs)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.394632] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.401263] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 2E577506-86FB-47CB-851E-14AE2AB00D76, small LPT model
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.413135] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.419837] block: unable to load configuration (fstab: Entry not found)
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.426431] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.432978] block: unable to load configuration (fstab: Entry not found)
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.439565] block: attempting to load /etc/config/fstab
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.451154] block: unable to load configuration (fstab: Entry not found)
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.456712] block: no usable configuration
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.464797] UBIFS (ubi0:2): un-mount UBI device 0
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.468207] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.480193] UBIFS (ubi0:2): Mounting in unauthenticated mode
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.484850] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 572
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.611041] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.617582] UBIFS (ubi0:2): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.627408] UBIFS (ubi0:2): FS size: 117411840 bytes (111 MiB, 910 LEBs), journal size 5935104 bytes (5 MiB, 46 LEBs)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.638017] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   10.644639] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 2E577506-86FB-47CB-851E-14AE2AB00D76, small LPT model
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.813961] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.819840] block: unable to load configuration (fstab: Entry not found)
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.826434] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.832964] block: unable to load configuration (fstab: Entry not found)
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.839551] block: attempting to load /etc/config/fstab
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.844854] block: unable to load configuration (fstab: Entry not found)
Tue Mar 23 15:04:05 2021 user.err kernel: [   10.851466] block: no usable configuration
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.857203] mount_root: overlay filesystem has not been fully initialized yet
Tue Mar 23 15:04:05 2021 user.info kernel: [   10.864157] mount_root: switching to ubifs overlay
Tue Mar 23 15:04:05 2021 user.warn kernel: [   11.415875] urandom-seed: Seed file not found (/etc/urandom.seed)
Tue Mar 23 15:04:05 2021 user.info kernel: [   11.556254] procd: - early -
Tue Mar 23 15:04:05 2021 user.info kernel: [   11.558063] procd: - watchdog -
Tue Mar 23 15:04:05 2021 user.info kernel: [   12.157149] procd: - watchdog -
Tue Mar 23 15:04:05 2021 user.info kernel: [   12.160252] procd: - ubus -
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   12.418847] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   12.427687] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   12.541381] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Mar 23 15:04:05 2021 user.info kernel: [   12.555210] procd: - init -
Tue Mar 23 15:04:05 2021 user.info kernel: [   13.746957] kmodloader: loading kernel modules from /etc/modules.d/*
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.040327] usbcore: registered new interface driver cdc_wdm
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.046552] Loading modules backported from Linux version v5.10.16-0-gde53befa79cf
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.052743] Backport generated by backports.git v5.10.16-1-0-g21d2a1d2
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.097157] Infineon Technologies DEU driver version 2.0.0
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.103850] IFX DEU DES initialized (multiblock).
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.109222] IFX DEU AES initialized (multiblock).
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.113396] IFX DEU ARC4 initialized (multiblock).
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.117772] IFX DEU SHA1 initialized.
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.121372] IFX DEU MD5 initialized.
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.124987] IFX DEU SHA1_HMAC initialized.
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   14.129133] IFX DEU MD5_HMAC initialized.
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.144055] usbcore: registered new interface driver ums-alauda
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.151211] usbcore: registered new interface driver ums-cypress
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.158922] usbcore: registered new interface driver ums-datafab
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.166597] usbcore: registered new interface driver ums-freecom
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.173959] usbcore: registered new interface driver ums-isd200
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.181636] usbcore: registered new interface driver ums-jumpshot
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.189448] usbcore: registered new interface driver ums-karma
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.197117] usbcore: registered new interface driver ums-sddr09
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.206962] usbcore: registered new interface driver ums-sddr55
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.215819] usbcore: registered new interface driver ums-usbat
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.234713] usbcore: registered new interface driver usbserial_generic
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.240120] usbserial: USB Serial support registered for generic
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.268689] xt_time: kernel timezone is -0000
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.274568] ath9k_pci_owl_loader 0000:00:0e.0: enabling device (0000 -> 0002)
Tue Mar 23 15:04:05 2021 kern.warn kernel: [   14.290630] ath9k_pci_owl_loader 0000:00:0e.0: Direct firmware load for ath9k-eeprom-pci-0000:00:0e.0.bin failed with error -2
Tue Mar 23 15:04:05 2021 kern.warn kernel: [   14.300675] ath9k_pci_owl_loader 0000:00:0e.0: Falling back to sysfs fallback for: ath9k-eeprom-pci-0000:00:0e.0.bin
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.316437] usbcore: registered new interface driver cdc_eem
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.326150] usbcore: registered new interface driver cdc_ether
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.336612] usbcore: registered new interface driver cdc_ncm
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.344135] usbcore: registered new interface driver cdc_subset
Tue Mar 23 15:04:05 2021 user.info kernel: [   14.595585] urngd: v1.0.2 started.
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.660686] usbcore: registered new interface driver dm9601
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.668101] usbcore: registered new interface driver huawei_cdc_ncm
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.760747] usbcore: registered new interface driver qmi_wwan
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.770211] usbcore: registered new interface driver rndis_host
Tue Mar 23 15:04:05 2021 kern.warn kernel: [   14.839776] ifx_pcie_bios_map_irq port 0 dev 0000:02:00.0 slot 0 pin 1
Tue Mar 23 15:04:05 2021 kern.warn kernel: [   14.845037] ifx_pcie_bios_map_irq dev 0000:02:00.0 irq 144 assigned
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.851345] ath10k 5.10 driver, optimized for CT firmware, probing pci device: 0x3c.
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.860934] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
Tue Mar 23 15:04:05 2021 kern.info kernel: [   14.866193] ath10k_pci 0000:02:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.117981] usb 1-1: new high-speed USB device number 2 using dwc2
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   15.225687] random: crng init done
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   15.227868] random: 6 urandom warning(s) missed due to ratelimiting
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.363300] huawei_cdc_ncm 1-1:1.3: MAC-Address: 0c:5b:8f:27:9a:64
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.368205] huawei_cdc_ncm 1-1:1.3: setting rx_max = 16384
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.377896] huawei_cdc_ncm 1-1:1.3: setting tx_max = 16384
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.385744] huawei_cdc_ncm 1-1:1.3: NDP will be placed at end of frame for this device.
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.392918] huawei_cdc_ncm 1-1:1.3: cdc-wdm0: USB WDM device
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.400019] huawei_cdc_ncm 1-1:1.3 wwan0: register 'huawei_cdc_ncm' at usb-1e101000.usb-1, Huawei CDC NCM device, 0c:5b:8f:27:9a:64
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.411264] usb-storage 1-1:1.4: USB Mass Storage device detected
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.418201] scsi host0: usb-storage 1-1:1.4
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.568599] ath9k_pci_owl_loader 0000:00:0e.0: fixup device configuration
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.587360] pci 0000:00:0e.0: [168c:002d] type 00 class 0x028000
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.592080] pci 0000:00:0e.0: reg 0x10: [mem 0x18000000-0x1800ffff]
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.598448] pci 0000:00:0e.0: PME# supported from D0 D3hot
Tue Mar 23 15:04:05 2021 kern.info kernel: [   15.607041] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   16.443600] scsi 0:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   16.633508] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   16.642534] sd 0:0:0:0: [sda] Write Protect is off
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   16.646059] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   16.647179] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Tue Mar 23 15:04:05 2021 kern.info kernel: [   16.677518]  sda: sda1
Tue Mar 23 15:04:05 2021 kern.notice kernel: [   16.687139] sd 0:0:0:0: [sda] Attached SCSI removable disk
Tue Mar 23 15:04:05 2021 kern.info kernel: [   18.862665] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
Tue Mar 23 15:04:05 2021 kern.info kernel: [   18.870614] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 1 testmode 0
Tue Mar 23 15:04:05 2021 kern.info kernel: [   18.884330] ath10k_pci 0000:02:00.0: firmware ver 10.1-ct-8x-__fH-022-ecad3248 api 2 features wmi-10.x,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 1b2a161c
Tue Mar 23 15:04:05 2021 kern.info kernel: [   19.084124] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
Tue Mar 23 15:04:05 2021 kern.warn kernel: [   19.910149] ath10k_pci 0000:02:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
Tue Mar 23 15:04:05 2021 kern.info kernel: [   19.926171] ath10k_pci 0000:02:00.0: wmi print 'P 128 V 8 T 410'
Tue Mar 23 15:04:05 2021 kern.info kernel: [   19.930797] ath10k_pci 0000:02:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
Tue Mar 23 15:04:05 2021 kern.info kernel: [   19.939190] ath10k_pci 0000:02:00.0: wmi print 'alloc rem: 25000 iram: 38944'
Tue Mar 23 15:04:05 2021 kern.info kernel: [   19.992725] ath10k_pci 0000:02:00.0: htt-ver 2.2 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.006953] ath10k_pci 0000:02:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.126420] ath: EEPROM regdomain: 0x833a
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.126431] ath: EEPROM indicates we should expect a country code
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.126447] ath: doing EEPROM country->regdmn map search
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.126456] ath: country maps to regdmn code: 0x37
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.126463] ath: Country alpha2 being used: GB
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.126468] ath: Regpair used: 0x37
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.169539] usbcore: registered new interface driver cdc_mbim
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.196975] usbcore: registered new interface driver option
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.201375] usbserial: USB Serial support registered for GSM modem (1-port)
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.208709] option 1-1:1.0: GSM modem (1-port) converter detected
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.214789] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.221505] option 1-1:1.1: GSM modem (1-port) converter detected
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.227689] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.234373] option 1-1:1.2: GSM modem (1-port) converter detected
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.240580] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.267341] ath9k 0000:00:0e.0: enabling device (0000 -> 0002)
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.278171] ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.285640] ath: EEPROM regdomain: 0x833a
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.285652] ath: EEPROM indicates we should expect a country code
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.285674] ath: doing EEPROM country->regdmn map search
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.285688] ath: country maps to regdmn code: 0x37
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.285699] ath: Country alpha2 being used: GB
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.285708] ath: Regpair used: 0x37
Tue Mar 23 15:04:05 2021 kern.debug kernel: [   20.306476] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Tue Mar 23 15:04:05 2021 kern.info kernel: [   20.309393] ieee80211 phy1: Atheros AR9287 Rev:2 mem=0xb8000000, irq=30
Tue Mar 23 15:04:05 2021 user.info kernel: [   20.318838] kmodloader: done loading kernel modules from /etc/modules.d/*
Tue Mar 23 15:04:07 2021 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Tue Mar 23 15:04:07 2021 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: Connected to system UBus
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: started, version 2.84 cachesize 150
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: DNS service limited to local subnets
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: UBus support enabled: connected to system bus
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain test
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain onion
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain localhost
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain local
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain invalid
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain bind
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: using only locally-known addresses for domain lan
Tue Mar 23 15:04:08 2021 daemon.warn dnsmasq[1825]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: read /etc/hosts - 4 addresses
Tue Mar 23 15:04:08 2021 daemon.info dnsmasq[1825]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Tue Mar 23 15:04:09 2021 authpriv.info dropbear[1887]: Not backgrounding
Tue Mar 23 15:04:11 2021 daemon.notice wpa_supplicant[1986]: Successfully initialized wpa_supplicant
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: 8021ad
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: 8021q
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: macvlan
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: veth
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: bridge
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: Network device
Tue Mar 23 15:04:11 2021 user.notice : Added device handler type: tunnel
Tue Mar 23 15:04:14 2021 daemon.err block: /dev/ubi0_2 is already mounted on /overlay
Tue Mar 23 15:04:17 2021 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Tue Mar 23 15:04:17 2021 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Tue Mar 23 15:04:17 2021 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Tue Mar 23 15:04:17 2021 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Tue Mar 23 15:04:17 2021 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Tue Mar 23 15:04:17 2021 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Tue Mar 23 15:04:18 2021 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Tue Mar 23 15:04:18 2021 kern.info kernel: [   38.517357] device eth0 entered promiscuous mode
Tue Mar 23 15:04:18 2021 kern.info kernel: [   38.523607] br-lan: port 1(eth0.1) entered blocking state
Tue Mar 23 15:04:18 2021 kern.info kernel: [   38.527689] br-lan: port 1(eth0.1) entered disabled state
Tue Mar 23 15:04:18 2021 kern.info kernel: [   38.533706] device eth0.1 entered promiscuous mode
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'lan' is enabled
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'lan' is setting up now
Tue Mar 23 15:04:18 2021 daemon.debug dnsmasq[1825]: listening on br-lan(#6): 192.168.9.1 port 53
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'lan' is now up
Tue Mar 23 15:04:18 2021 daemon.debug dnsmasq[1825]: listening on lo(#1): 127.0.0.1 port 53
Tue Mar 23 15:04:18 2021 daemon.debug dnsmasq[1825]: listening on lo(#1): ::1 port 53
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'loopback' is enabled
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'loopback' is now up
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'wan' is setting up now
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Network device 'lo' link is up
Tue Mar 23 15:04:18 2021 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Mar 23 15:04:19 2021 daemon.err odhcpd[2208]: Failed to send to ff02::1%lan@br-lan (Permission denied)
Tue Mar 23 15:04:19 2021 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Tue Mar 23 15:04:20 2021 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Tue Mar 23 15:04:20 2021 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878132] ath: EEPROM regdomain: 0x8174
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878196] ath: EEPROM indicates we should expect a country code
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878212] ath: doing EEPROM country->regdmn map search
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878251] ath: country maps to regdmn code: 0x37
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878262] ath: Country alpha2 being used: IE
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878268] ath: Regpair used: 0x37
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878280] ath: regdomain 0x8174 dynamically updated by user
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878538] ath: EEPROM regdomain: 0x8174
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878560] ath: EEPROM indicates we should expect a country code
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878586] ath: doing EEPROM country->regdmn map search
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878657] ath: country maps to regdmn code: 0x37
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878668] ath: Country alpha2 being used: IE
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878674] ath: Regpair used: 0x37
Tue Mar 23 15:04:20 2021 kern.debug kernel: [   40.878686] ath: regdomain 0x8174 dynamically updated by user
Tue Mar 23 15:04:21 2021 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Tue Mar 23 15:04:21 2021 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Tue Mar 23 15:04:23 2021 daemon.notice netifd: wan (2527): sending -> AT
Tue Mar 23 15:04:23 2021 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy wlan1) --> new PHY
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.120562] br-lan: port 2(wlan1) entered blocking state
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.124694] br-lan: port 2(wlan1) entered disabled state
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.130939] device wlan1 entered promiscuous mode
Tue Mar 23 15:04:24 2021 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Mar 23 15:04:24 2021 daemon.notice netifd: wan (2527): sending -> ATZ
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.494055] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.499500] br-lan: port 2(wlan1) entered blocking state
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.504420] br-lan: port 2(wlan1) entered forwarding state
Tue Mar 23 15:04:24 2021 daemon.notice netifd: bridge 'br-lan' link is up
Tue Mar 23 15:04:24 2021 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Mar 23 15:04:24 2021 kern.info kernel: [   44.526090] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Mar 23 15:04:24 2021 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY
Tue Mar 23 15:04:24 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led wifi
Tue Mar 23 15:04:24 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led dsl
Tue Mar 23 15:04:24 2021 daemon.notice netifd: wan (2527): sending -> ATQ0
Tue Mar 23 15:04:25 2021 daemon.notice netifd: wan (2527): sending -> ATV1
Tue Mar 23 15:04:25 2021 kern.warn kernel: [   45.516706] ath10k_pci 0000:02:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.532563] ath10k_pci 0000:02:00.0: wmi print 'P 128 V 8 T 410'
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.537788] ath10k_pci 0000:02:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.545295] ath10k_pci 0000:02:00.0: wmi print 'alloc rem: 25000 iram: 38944'
Tue Mar 23 15:04:25 2021 kern.warn kernel: [   45.615705] ath10k_pci 0000:02:00.0: pdev param 0 not supported by firmware
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.630004] ath10k_pci 0000:02:00.0: rts threshold -1
Tue Mar 23 15:04:25 2021 kern.warn kernel: [   45.633786] ath10k_pci 0000:02:00.0: set-coverage-class, phyclk: 88  value: 1
Tue Mar 23 15:04:25 2021 daemon.err odhcpd[2208]: Failed to send to ff02::1%lan@br-lan (Address not available)
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.656565] br-lan: port 3(wlan0) entered blocking state
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.660628] br-lan: port 3(wlan0) entered disabled state
Tue Mar 23 15:04:25 2021 kern.info kernel: [   45.666544] device wlan0 entered promiscuous mode
Tue Mar 23 15:04:25 2021 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Mar 23 15:04:25 2021 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Tue Mar 23 15:04:25 2021 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ACS
Tue Mar 23 15:04:25 2021 daemon.notice hostapd: wlan0: ACS-STARTED
Tue Mar 23 15:04:25 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led dimmed
Tue Mar 23 15:04:25 2021 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ENABLED
Tue Mar 23 15:04:25 2021 daemon.notice hostapd: wlan1: AP-ENABLED
Tue Mar 23 15:04:26 2021 daemon.notice netifd: wan (2527): sending -> ATE1
Tue Mar 23 15:04:26 2021 daemon.debug dnsmasq[1825]: listening on wlan1(#8): fe80::1a62:2cff:fe27:244a%wlan1 port 53
Tue Mar 23 15:04:26 2021 daemon.debug dnsmasq[1825]: listening on br-lan(#6): fe80::a21b:29ff:fe5b:7faa%br-lan port 53
Tue Mar 23 15:04:26 2021 daemon.notice netifd: wan (2527): sending -> ATS0=0
Tue Mar 23 15:04:26 2021 daemon.info procd: - init complete -
Tue Mar 23 15:04:27 2021 daemon.notice netifd: wan (2527): sending -> AT+CGDCONT=1,"IP","broadband.mymeteor.ie"
Tue Mar 23 15:04:27 2021 daemon.info urandom_seed[3256]: Seed saved (/etc/urandom.seed)
Tue Mar 23 15:04:27 2021 daemon.notice netifd: Network device 'wlan1' link is up
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[1825]: exiting on receipt of SIGTERM
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: Connected to system UBus
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: started, version 2.84 cachesize 150
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: DNS service limited to local subnets
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: UBus support enabled: connected to system bus
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq-dhcp[3330]: DHCP, IP range 192.168.9.100 -- 192.168.9.249, lease time 12h
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain test
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain onion
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain localhost
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain local
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain invalid
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain bind
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain lan
Tue Mar 23 15:04:28 2021 daemon.warn dnsmasq[3330]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: read /etc/hosts - 4 addresses
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq-dhcp[3330]: read /etc/ethers - 0 addresses
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: read /etc/hosts - 4 addresses
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq[3330]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Tue Mar 23 15:04:28 2021 daemon.info dnsmasq-dhcp[3330]: read /etc/ethers - 0 addresses
Tue Mar 23 15:04:28 2021 daemon.notice netifd: wan (2527): Configuring modem
Tue Mar 23 15:04:28 2021 daemon.notice netifd: wan (2527): Starting network wan
Tue Mar 23 15:04:28 2021 daemon.notice netifd: wan (2527): Connecting modem
Tue Mar 23 15:04:28 2021 daemon.notice netifd: wan (2527): sending -> AT^NDISDUP=1,1,"broadband.mymeteor.ie"
Tue Mar 23 15:04:29 2021 daemon.notice netifd: wan (2527): Setting up wwan0
Tue Mar 23 15:04:29 2021 daemon.notice netifd: Interface 'wan' is now up
Tue Mar 23 15:04:29 2021 daemon.notice netifd: Network device 'wwan0' link is up
Tue Mar 23 15:04:29 2021 daemon.notice netifd: Network alias 'wwan0' link is up
Tue Mar 23 15:04:29 2021 daemon.notice netifd: Interface 'wan_4' is enabled
Tue Mar 23 15:04:29 2021 daemon.notice netifd: Interface 'wan_4' has link connectivity
Tue Mar 23 15:04:29 2021 daemon.notice netifd: Interface 'wan_4' is setting up now
Tue Mar 23 15:04:30 2021 daemon.info dnsmasq[3330]: read /etc/hosts - 4 addresses
Tue Mar 23 15:04:30 2021 daemon.info dnsmasq[3330]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Tue Mar 23 15:04:30 2021 daemon.info dnsmasq-dhcp[3330]: read /etc/ethers - 0 addresses
Tue Mar 23 15:04:30 2021 daemon.notice netifd: wan_4 (3534): udhcpc: started, v1.33.0
Tue Mar 23 15:04:30 2021 user.notice firewall: Reloading firewall due to ifup of wan (wwan0)
Tue Mar 23 15:04:30 2021 daemon.notice netifd: wan_4 (3534): udhcpc: sending discover
Tue Mar 23 15:04:30 2021 daemon.notice netifd: wan_4 (3534): udhcpc: sending select for 100.70.78.141
Tue Mar 23 15:04:30 2021 daemon.notice netifd: wan_4 (3534): udhcpc: lease of 100.70.78.141 obtained, lease time 518400
Tue Mar 23 15:04:31 2021 daemon.debug dnsmasq[3330]: listening on wwan0(#3): 100.70.78.141 port 53
Tue Mar 23 15:04:31 2021 daemon.notice netifd: Interface 'wan_4' is now up
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: reading /tmp/resolv.conf.d/resolv.conf.auto
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain test
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain onion
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain localhost
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain local
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain invalid
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain bind
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using only locally-known addresses for domain lan
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using nameserver 159.134.0.11#53
Tue Mar 23 15:04:31 2021 daemon.info dnsmasq[3330]: using nameserver 159.134.0.12#53
Tue Mar 23 15:04:31 2021 daemon.debug dnsmasq[3330]: listening on wwan0(#3): fe80::e5b:8fff:fe27:9a64%wwan0 port 53
Tue Mar 23 15:04:32 2021 user.notice firewall: Reloading firewall due to ifup of wan_4 (wwan0)
Tue Mar 23 16:35:41 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 IEEE 802.11: authenticated
Tue Mar 23 16:35:41 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 IEEE 802.11: associated (aid 1)
Tue Mar 23 16:35:41 2021 daemon.notice hostapd: wlan1: AP-STA-CONNECTED d8:9c:67:ac:c4:b3
Tue Mar 23 16:35:41 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 WPA: pairwise key handshake completed (RSN)
Tue Mar 23 16:35:41 2021 user.info banIP-0.7.5[4021]: start banIP processing (refresh)
Tue Mar 23 16:35:41 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3
Tue Mar 23 16:35:41 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3 JDonnell
Tue Mar 23 16:35:42 2021 daemon.info dnsmasq[3330]: read /etc/hosts - 4 addresses
Tue Mar 23 16:35:42 2021 daemon.info dnsmasq[3330]: read /tmp/hosts/odhcpd - 0 addresses
Tue Mar 23 16:35:42 2021 daemon.info dnsmasq[3330]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Tue Mar 23 16:35:42 2021 daemon.info dnsmasq-dhcp[3330]: read /etc/ethers - 0 addresses
Tue Mar 23 16:35:42 2021 user.info banIP-0.7.5[4021]: IP address '100.70.78.141/30' added to whitelist
Tue Mar 23 16:35:47 2021 daemon.notice hostapd: wlan0: ACS-COMPLETED freq=5500 channel=100
Tue Mar 23 16:35:47 2021 daemon.notice hostapd: wlan0: interface state ACS->HT_SCAN
Tue Mar 23 16:35:50 2021 daemon.notice hostapd: wlan0: interface state HT_SCAN->DFS
Tue Mar 23 16:35:50 2021 daemon.notice hostapd: wlan0: DFS-CAC-START freq=5500 chan=100 sec_chan=1, width=1, seg0=106, seg1=0, cac_time=60s
Tue Mar 23 16:36:07 2021 cron.err crond[2278]: time disparity of 91 minutes detected
Tue Mar 23 16:36:47 2021 daemon.info hostapd: wlan1: STA a4:71:74:e9:90:33 IEEE 802.11: authenticated
Tue Mar 23 16:36:47 2021 daemon.info hostapd: wlan1: STA a4:71:74:e9:90:33 IEEE 802.11: associated (aid 2)
Tue Mar 23 16:36:47 2021 daemon.notice hostapd: wlan1: AP-STA-CONNECTED a4:71:74:e9:90:33
Tue Mar 23 16:36:47 2021 daemon.info hostapd: wlan1: STA a4:71:74:e9:90:33 WPA: pairwise key handshake completed (RSN)
Tue Mar 23 16:36:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.157 a4:71:74:e9:90:33
Tue Mar 23 16:36:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.157 a4:71:74:e9:90:33 HUAWEI_P9
Tue Mar 23 16:36:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.157 a4:71:74:e9:90:33
Tue Mar 23 16:36:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.157 a4:71:74:e9:90:33 HUAWEI_P9
Tue Mar 23 16:36:50 2021 kern.info kernel: [  123.929810] ath10k_pci 0000:02:00.0: mac flush null vif, drop 0 queues 0xffff
Tue Mar 23 16:36:50 2021 daemon.notice hostapd: wlan0: DFS-CAC-COMPLETED success=1 freq=5500 ht_enabled=0 chan_offset=0 chan_width=3 cf1=5530 cf2=0
Tue Mar 23 16:36:51 2021 kern.info kernel: [  124.246614] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Mar 23 16:36:51 2021 kern.info kernel: [  124.252192] br-lan: port 3(wlan0) entered blocking state
Tue Mar 23 16:36:51 2021 kern.info kernel: [  124.256935] br-lan: port 3(wlan0) entered forwarding state
Tue Mar 23 16:36:51 2021 daemon.notice hostapd: wlan0: interface state DFS->ENABLED
Tue Mar 23 16:36:51 2021 daemon.notice hostapd: wlan0: AP-ENABLED
Tue Mar 23 16:36:51 2021 daemon.notice netifd: Network device 'wlan0' link is up
Tue Mar 23 16:36:52 2021 daemon.debug dnsmasq[3330]: listening on wlan0(#9): fe80::1a62:2cff:fe27:244b%wlan0 port 53
Tue Mar 23 16:36:59 2021 daemon.warn dnsmasq[3330]: nameserver 159.134.0.11 refused to do a recursive query
Tue Mar 23 16:39:36 2021 user.info banIP-0.7.5[4021]: 20 IPSets with overall 341200 IPs/Prefixes loaded successfully (BT Home Hub 5A, OpenWrt SNAPSHOT r16313-851dadc257)
Tue Mar 23 16:53:54 2021 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED a4:71:74:e9:90:33
Tue Mar 23 16:53:54 2021 daemon.info hostapd: wlan1: STA a4:71:74:e9:90:33 IEEE 802.11: disassociated
Tue Mar 23 16:53:55 2021 daemon.info hostapd: wlan1: STA a4:71:74:e9:90:33 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Mar 23 20:07:26 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: authenticated
Tue Mar 23 20:07:26 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: associated (aid 1)
Tue Mar 23 20:07:26 2021 daemon.notice hostapd: wlan0: AP-STA-CONNECTED a4:71:74:e9:90:33
Tue Mar 23 20:07:26 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 WPA: pairwise key handshake completed (RSN)
Tue Mar 23 20:07:26 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.157 a4:71:74:e9:90:33
Tue Mar 23 20:07:26 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.157 a4:71:74:e9:90:33 HUAWEI_P9
Tue Mar 23 20:07:26 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.157 a4:71:74:e9:90:33
Tue Mar 23 20:07:26 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.157 a4:71:74:e9:90:33 HUAWEI_P9
Tue Mar 23 20:32:40 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: authenticated
Tue Mar 23 20:32:40 2021 daemon.notice hostapd: wlan0: STA-OPMODE-N_SS-CHANGED 8c:f5:a3:a5:78:02 2
Tue Mar 23 20:32:40 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: associated (aid 2)
Tue Mar 23 20:32:40 2021 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:40 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 WPA: pairwise key handshake completed (RSN)
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Tue Mar 23 20:32:44 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02 Galaxy-S7
Tue Mar 23 21:07:34 2021 daemon.notice hostapd: wlan1: STA-OPMODE-MAX-BW-CHANGED d8:9c:67:ac:c4:b3 20
Tue Mar 23 21:08:12 2021 daemon.notice hostapd: wlan1: STA-OPMODE-MAX-BW-CHANGED d8:9c:67:ac:c4:b3 40
Tue Mar 23 21:08:14 2021 daemon.notice hostapd: wlan1: STA-OPMODE-MAX-BW-CHANGED d8:9c:67:ac:c4:b3 20
Tue Mar 23 21:09:34 2021 daemon.notice hostapd: wlan1: STA-OPMODE-MAX-BW-CHANGED d8:9c:67:ac:c4:b3 40
Tue Mar 23 21:09:36 2021 daemon.notice hostapd: wlan1: STA-OPMODE-MAX-BW-CHANGED d8:9c:67:ac:c4:b3 20
Tue Mar 23 21:10:34 2021 daemon.notice hostapd: wlan1: STA-OPMODE-MAX-BW-CHANGED d8:9c:67:ac:c4:b3 40
Tue Mar 23 21:56:43 2021 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 8c:f5:a3:a5:78:02
Tue Mar 23 21:56:43 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: disassociated due to inactivity
Tue Mar 23 21:56:44 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Mar 23 22:05:59 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: authenticated
Tue Mar 23 22:05:59 2021 daemon.notice hostapd: wlan0: STA-OPMODE-N_SS-CHANGED 8c:f5:a3:a5:78:02 2
Tue Mar 23 22:05:59 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: associated (aid 2)
Tue Mar 23 22:05:59 2021 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 8c:f5:a3:a5:78:02
Tue Mar 23 22:05:59 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 WPA: pairwise key handshake completed (RSN)
Tue Mar 23 22:06:00 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Tue Mar 23 22:06:00 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Tue Mar 23 22:06:00 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Tue Mar 23 22:06:00 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02 Galaxy-S7
Tue Mar 23 22:35:41 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3
Tue Mar 23 22:35:41 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3 JDonnell
Wed Mar 24 00:06:56 2021 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED a4:71:74:e9:90:33
Wed Mar 24 00:06:56 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: disassociated
Wed Mar 24 00:06:57 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Wed Mar 24 01:15:07 2021 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 8c:f5:a3:a5:78:02
Wed Mar 24 01:15:07 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: disassociated due to inactivity
Wed Mar 24 01:15:08 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Wed Mar 24 04:08:01 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3
Wed Mar 24 04:08:01 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3 JDonnell
Wed Mar 24 09:39:15 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3
Wed Mar 24 09:39:15 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3 JDonnell
Wed Mar 24 11:53:18 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: authenticated
Wed Mar 24 11:53:18 2021 daemon.notice hostapd: wlan0: STA-OPMODE-N_SS-CHANGED 8c:f5:a3:a5:78:02 2
Wed Mar 24 11:53:18 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: associated (aid 1)
Wed Mar 24 11:53:18 2021 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 8c:f5:a3:a5:78:02
Wed Mar 24 11:53:18 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 WPA: pairwise key handshake completed (RSN)
Wed Mar 24 11:53:22 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Wed Mar 24 11:53:22 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Wed Mar 24 11:53:22 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Wed Mar 24 11:53:22 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Wed Mar 24 11:53:22 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Wed Mar 24 11:53:22 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02 Galaxy-S7
Wed Mar 24 11:53:47 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: authenticated
Wed Mar 24 11:53:47 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: associated (aid 2)
Wed Mar 24 11:53:47 2021 daemon.notice hostapd: wlan0: AP-STA-CONNECTED a4:71:74:e9:90:33
Wed Mar 24 11:53:47 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 WPA: pairwise key handshake completed (RSN)
Wed Mar 24 11:53:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.157 a4:71:74:e9:90:33
Wed Mar 24 11:53:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.157 a4:71:74:e9:90:33 HUAWEI_P9
Wed Mar 24 11:53:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.157 a4:71:74:e9:90:33
Wed Mar 24 11:53:47 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.157 a4:71:74:e9:90:33 HUAWEI_P9
Wed Mar 24 13:31:24 2021 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED a4:71:74:e9:90:33
Wed Mar 24 13:31:24 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: disassociated
Wed Mar 24 13:31:25 2021 daemon.info hostapd: wlan0: STA a4:71:74:e9:90:33 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Wed Mar 24 13:31:33 2021 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED d8:9c:67:ac:c4:b3
Wed Mar 24 13:31:33 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 IEEE 802.11: disassociated
Wed Mar 24 13:31:34 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Wed Mar 24 14:03:29 2021 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 8c:f5:a3:a5:78:02
Wed Mar 24 14:03:29 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: disassociated due to inactivity
Wed Mar 24 14:03:30 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Wed Mar 24 14:08:57 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: authenticated
Wed Mar 24 14:08:57 2021 daemon.notice hostapd: wlan0: STA-OPMODE-N_SS-CHANGED 8c:f5:a3:a5:78:02 2
Wed Mar 24 14:08:57 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 IEEE 802.11: associated (aid 1)
Wed Mar 24 14:08:57 2021 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 8c:f5:a3:a5:78:02
Wed Mar 24 14:08:57 2021 daemon.info hostapd: wlan0: STA 8c:f5:a3:a5:78:02 WPA: pairwise key handshake completed (RSN)
Wed Mar 24 14:08:58 2021 daemon.info dnsmasq-dhcp[3330]: DHCPDISCOVER(br-lan) 8c:f5:a3:a5:78:02
Wed Mar 24 14:08:58 2021 daemon.info dnsmasq-dhcp[3330]: DHCPOFFER(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Wed Mar 24 14:08:58 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02
Wed Mar 24 14:08:58 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.117 8c:f5:a3:a5:78:02 Galaxy-S7
Wed Mar 24 16:25:29 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 IEEE 802.11: authenticated
Wed Mar 24 16:25:29 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 IEEE 802.11: associated (aid 1)
Wed Mar 24 16:25:29 2021 daemon.notice hostapd: wlan1: AP-STA-CONNECTED d8:9c:67:ac:c4:b3
Wed Mar 24 16:25:29 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 WPA: pairwise key handshake completed (RSN)
Wed Mar 24 16:25:32 2021 daemon.info dnsmasq-dhcp[3330]: DHCPREQUEST(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3
Wed Mar 24 16:25:32 2021 daemon.info dnsmasq-dhcp[3330]: DHCPACK(br-lan) 192.168.9.186 d8:9c:67:ac:c4:b3 JDonnell
Wed Mar 24 16:35:31 2021 daemon.info hostapd: wlan1: STA d8:9c:67:ac:c4:b3 WPA: group key handshake completed (RSN)
Wed Mar 24 16:36:36 2021 user.notice wan-check:: WAN interface failed. Restarting it.....
Wed Mar 24 16:36:37 2021 daemon.notice netifd: wan (14027): Stopping network wan
Wed Mar 24 16:36:37 2021 daemon.notice netifd: wan_4 (3534): udhcpc: received SIGTERM
Wed Mar 24 16:36:37 2021 daemon.notice netifd: wan_4 (3534): udhcpc: unicasting a release of 100.70.78.141 to 100.70.78.142
Wed Mar 24 16:36:37 2021 daemon.notice netifd: wan_4 (3534): udhcpc: sending release
Wed Mar 24 16:36:37 2021 daemon.notice netifd: wan_4 (3534): udhcpc: entering released state
Wed Mar 24 16:36:37 2021 daemon.notice netifd: wan_4 (3534): Command failed: Permission denied
Wed Mar 24 16:36:38 2021 daemon.notice netifd: Interface 'wan_4' is now down
Wed Mar 24 16:36:38 2021 daemon.debug dnsmasq[3330]: stopped listening on wwan0(#3): 100.70.78.141 port 53
Wed Mar 24 16:36:38 2021 daemon.notice netifd: Network alias '' link is down
Wed Mar 24 16:36:38 2021 daemon.notice netifd: Interface 'wan_4' has link connectivity loss
Wed Mar 24 16:36:38 2021 daemon.notice netifd: Interface 'wan_4' is disabled
Wed Mar 24 16:36:38 2021 daemon.warn dnsmasq[3330]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Wed Mar 24 16:36:39 2021 daemon.notice netifd: wan (14027): sending -> AT^NDISDUP=1,0
13.09.20203336Base systemBug ReportVery LowLowtrunk: generic/pending-5.4/770-11-net-ethernet-mtk_eth_...TrunkUnconfirmed Task Description

On current trunk the following file has a truncated extension

generic/pending-5.4/770-11-net-ethernet-mtk_eth_soc-avoid-rearming-interrupt-if.pa

the initial commit of this file

16.03.20181437Base systemBug ReportVery LowHighTrunk r6421 not save configuration on ER3.TrunkUnconfirmed Task Description

Problem on ER3 r6421.

Flashing success, but not save configuration. Every time i'm reboot, router roll back to default config.

Here are serial output:

## Loading Linux kernel with entry point: 0xffffffff815efa20 ...
Bootloader: Done loading app on coremask: 0x3
[    0.000000] Linux version 4.14.25 (teq@teqdesk) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6302-0f54d96d24)) #0 SMP Sun Mar 18
[    0.000000] CVMSEG size: 2 cache lines (256 bytes)
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 000d0601 (Cavium Octeon+)
[    0.000000] Checking for the multiply/shift bug... no.
[    0.000000] Checking for the daddiu bug... no.
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 0000000005400000 @ 0000000002a00000 (usable)
[    0.000000]  memory: 0000000007c00000 @ 0000000008200000 (usable)
[    0.000000]  memory: 000000000fc00000 @ 0000000410000000 (usable)
[    0.000000]  memory: 0000000001826e20 @ 0000000001100000 (usable)
[    0.000000] Wasting 243712 bytes for tracking 4352 unused pages
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Using internal Device Tree.
[    0.000000] software IO TLB [mem 0x0398e000-0x0798e000] (64MB) mapped at [800000000398e000-800000000798dfff]
[    0.000000] Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
[    0.000000] Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000000000-0x00000000efffffff]
[    0.000000]   Normal   [mem 0x00000000f0000000-0x000000041fbfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000002925fff]
[    0.000000]   node   0: [mem 0x0000000002a00000-0x0000000007dfffff]
[    0.000000]   node   0: [mem 0x0000000008200000-0x000000000fdfffff]
[    0.000000]   node   0: [mem 0x0000000410000000-0x000000041fbfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000041fbfffff]
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 19 pages/cpu @80000000079f9000 s39344 r8192 d30288 u77824
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 126539
[    0.000000] Kernel command line: mtdparts=phys_mapped_flash:512k(boot0)ro,512k(boot1)ro,64k(eeprom)ro root=/dev/sda2 root0
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Memory: 396916K/513176K available (5086K kernel code, 330K rwdata, 1236K rodata, 1328K init, 16731K bss, 1162)
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 127
[   13.844962] clocksource: OCTEON_CVMCOUNT: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
[   13.855830] Calibrating delay loop (skipped) preset value.. 1000.00 BogoMIPS (lpj=2000000)
[   13.864040] pid_max: default: 32768 minimum: 301
[   13.868767] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[   13.875252] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[   13.882962] Checking for the daddi bug... no.
[   13.888198] Hierarchical SRCU implementation.
[   13.893207] smp: Bringing up secondary CPUs ...
[   13.898265] SMP: Booting CPU01 (CoreId  1)...
[   13.902655] CPU1 revision is: 000d0601 (Cavium Octeon+)
[   13.902885] smp: Brought up 1 node, 2 CPUs
[   13.916204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[   13.925852] futex hash table entries: 512 (order: 4, 65536 bytes)
[   13.932600] NET: Registered protocol family 16
[   13.947309] Not in host mode, PCI Controller not initialized
[   13.968490] SCSI subsystem initialized
[   13.972686] usbcore: registered new interface driver usbfs
[   13.978233] usbcore: registered new interface driver hub
[   13.983653] usbcore: registered new device driver usb
[   13.990959] clocksource: Switched to clocksource OCTEON_CVMCOUNT
[   13.998255] NET: Registered protocol family 2
[   14.003415] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[   14.010447] TCP bind hash table entries: 4096 (order: 5, 131072 bytes)
[   14.016998] TCP: Hash tables configured (established 4096 bind 4096)
[   14.023382] UDP hash table entries: 256 (order: 2, 24576 bytes)
[   14.029247] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[   14.035842] NET: Registered protocol family 1
[   14.041861] Crashlog allocated RAM at address 0x3f00000
[   14.047176] workingset: timestamp_bits=62 max_order=17 bucket_order=0
[   14.065676] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   14.071763] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[   14.086436] io scheduler noop registered
[   14.090468] io scheduler deadline registered (default)
[   14.096184] octeon_gpio 1070000000800.gpio-controller: OCTEON GPIO driver probed.
[   14.103985] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   14.111417] console [ttyS0] disabled
[   14.114893] 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 41, base_baud = 31250000) is a OCTEON
[   14.124683] console [ttyS0] enabled
[   14.124683] console [ttyS0] enabled
[   14.131607] bootconsole [early0] disabled
[   14.131607] bootconsole [early0] disabled
[   14.140285] 1180000000c00.serial: ttyS1 at MMIO 0x1180000000c00 (irq = 42, base_baud = 31250000) is a OCTEON
[   14.150793] octeon_rng octeon_rng: Octeon Random Number Generator
[   14.157467] cacheinfo: Failed to find cpu0 device node
[   14.162685] cacheinfo: Unable to detect cache hierarchy for CPU 0
[   14.175673] loop: module loaded
[   14.179780] of-flash 1f400000.nor: Can't get bank width from device tree
[   14.187061] libphy: mdio_octeon: probed
[   14.191005] [Firmware Warn]: /soc@0/mdio@1180000001800/ethernet-phy@7: Whitelisted compatible string. Please remove
[   14.202182] [Firmware Warn]: /soc@0/mdio@1180000001800/ethernet-phy@6: Whitelisted compatible string. Please remove
[   14.213362] [Firmware Warn]: /soc@0/mdio@1180000001800/ethernet-phy@5: Whitelisted compatible string. Please remove
[   14.224507] mdio_octeon 1180000001800.mdio: Probed
[   14.229932] libphy: Fixed MDIO Bus: probed
[   14.234303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   14.240892] ehci-platform: EHCI generic platform driver
[   14.246401] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   14.252671] ohci-platform: OHCI generic platform driver
[   14.258302] usbcore: registered new interface driver usb-storage
[   14.264425] octeon_wdt: Initial granularity 5 Sec
[   14.273052] Interface 0 has 3 ports (RGMII)
[   14.281525] octeon-hcd 16f0010000000.usbc: Octeon Host Controller
[   14.287752] octeon-hcd 16f0010000000.usbc: new USB bus registered, assigned bus number 1
[   14.295976] octeon-hcd 16f0010000000.usbc: irq 56, io mem 0x00000000
[   14.303455] hub 1-0:1.0: USB hub found
[   14.307394] hub 1-0:1.0: 1 port detected
[   14.311991] octeon-hcd 16f0010000000.usbc: Registered HCD for port 0 on irq 56
[   14.320877] NET: Registered protocol family 10
[   14.327445] Segment Routing with IPv6
[   14.331299] NET: Registered protocol family 17
[   14.335870] 8021q: 802.1Q VLAN Support v1.8
[   14.340407] Bootbus flash: Setting flash for 4MB flash at 0x1f800000
[   14.346967] phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000a7
[   14.357360] Amd/Fujitsu Extended Query Table at 0x0040
[   14.362566]   Amd/Fujitsu Extended Query version 1.1.
[   14.367649] phys_mapped_flash: Swapping erase regions for top-boot CFI table.
[   14.374815] number of CFI chips: 1
[   14.378278] 3 cmdlinepart partitions found on MTD device phys_mapped_flash
[   14.385191] Creating 3 MTD partitions on "phys_mapped_flash":
[   14.390979] 0x000000000000-0x000000080000 : "boot0"
[   14.397066] 0x000000080000-0x000000100000 : "boot1"
[   14.403212] 0x000000100000-0x000000110000 : "eeprom"
[   14.411056] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
[   14.418316] Waiting for root device /dev/sda2...
[   14.694990] usb 1-1: new high-speed USB device number 2 using octeon-hcd
[   15.157589] usb-storage 1-1:1.0: USB Mass Storage device detected
[   15.164285] scsi host0: usb-storage 1-1:1.0
[   16.377528] scsi 0:0:0:0: Direct-Access     SRT      USB              1100 PQ: 0 ANSI: 4
[   16.387726] sd 0:0:0:0: [sda] 15765504 512-byte logical blocks: (8.07 GB/7.52 GiB)
[   16.396124] sd 0:0:0:0: [sda] Write Protect is off
[   16.401790] sd 0:0:0:0: [sda] No Caching mode page found
[   16.407211] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   16.417477]  sda: sda1 sda2
[   16.423799] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   16.435439] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[   16.443711] Freeing unused kernel memory: 1328K
[   16.448300] This architecture does not have kernel memory protection.
[   16.979499] init: Console is alive
[   16.983324] init: - watchdog -
[   17.607797] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[   17.722469] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[   17.740277] init: - preinit -
[   18.930430] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   20.963071] eth0: 1000 Mbps Full duplex, port 0, queue 0
[   20.968484] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.208639] mount_root: rootdisk overlay filesystem has not been formatted yet
sh: mkfs.f2fs: not found
[   22.221786] mount_root: no usable overlay filesystem found, using tmpfs overlay
[   23.377720] random: crng init done
[   23.407105] urandom-seed: Seed file not found (/etc/urandom.seed)
[   23.538293] eth0: Link down
[   23.551669] procd: - early -
[   23.554692] procd: - watchdog -
[   24.221523] procd: - watchdog -
[   24.225235] procd: - ubus -
[   24.364194] procd: - init -
Please press Enter to activate this console.
[   24.943579] kmodloader: loading kernel modules from /etc/modules.d/*
[   24.964605] l2tp_core: L2TP core driver, V2.0
[   24.970234] l2tp_netlink: L2TP netlink interface
[   24.980069] gre: GRE over IPv4 demultiplexor driver
[   24.987409] ip_gre: GRE over IPv4 tunneling driver
[   25.001262] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   25.289771] Netfilter messages via NETLINK v0.30.
[   25.297611] ip_set: protocol 6
[   25.337788] cryptodev: driver 1.9 loaded.
[   25.358006] u32 classifier
[   25.360794]     input device check on
[   25.364596]     Actions configured
[   25.371338] Mirror/redirect action on
[   25.386211] nf_conntrack version 0.5.0 (3584 buckets, 14336 max)
[   25.405328] ip_tables: (C) 2000-2006 Netfilter Core Team
[   25.553490] ctnetlink v0.93: registering with nfnetlink.
[   25.698364] wireguard: WireGuard 0.0.20180304 loaded. See www.wireguard.com for information.
[   25.706931] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   25.765405] xt_time: kernel timezone is -0000
[   25.858495] PPP generic driver version 2.4.2
[   25.865711] PPP MPPE Compression module registered
[   25.872986] NET: Registered protocol family 24
[   25.879616] PPTP driver version 0.8.5
[   25.888062] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   25.896812] kmodloader: done loading kernel modules from /etc/modules.d/*
[   32.622166] br-lan: port 1(eth0) entered blocking state
[   32.627510] br-lan: port 1(eth0) entered disabled state
[   32.633218] device eth0 entered promiscuous mode
[   32.648210] br-lan: port 1(eth0) entered blocking state
[   32.653545] br-lan: port 1(eth0) entered forwarding state
[   32.659197] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   32.700308] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   33.645742] br-lan: port 1(eth0) entered disabled state
[   34.746429] eth0: 1000 Mbps Full duplex, port 0, queue 0
[   34.763064] br-lan: port 1(eth0) entered blocking state
[   34.768376] br-lan: port 1(eth0) entered forwarding state
[   34.807116] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   35.811122] eth1: 1000 Mbps Full duplex, port 1, queue 1
[   35.816578] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   39.261056] MTD: Attempt to mount non-MTD device "/dev/loop0"
12.10.20203381Base systemBug ReportVery LowLowTrunk don't initialize pci cards at mt7621TrunkUnconfirmed Task Description

Trunk does not initialize pci adapter cards properly.

I’m using unielec mt7621 board with kind of Atheros miniPCIe cards? in this test installed AR9287 adapter.

Here is lspci and part of dmesg output from 19.07.4:

root@OpenWrt:~# lspci -v
02:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
        Subsystem: Qualcomm Atheros Device 30a4
        Flags: fast devsel, IRQ 255
        Memory at 60200000 (64-bit, non-prefetchable) [disabled] [size=64K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [60] Express Legacy Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Virtual Channel
        Capabilities: [160] Device Serial Number 00-15-17-ff-ff-24-14-12
        Capabilities: [170] Power Budgeting <?>

[    2.261556] pci 0000:02:00.0: [168c:002e] type 00 class 0x028000
[    2.261628] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    2.261756] pci 0000:02:00.0: supports D1
[    2.261764] pci 0000:02:00.0: PME# supported from D0 D1 D3hot

Here is lspci and part of dmesg output from trunk:

02:00.0 Ethernet controller: Qualcomm Atheros AR5008 Wireless Network Adapter (rev 01)
        Flags: fast devsel, IRQ 255
        Memory at 60200000 (64-bit, non-prefetchable) [disabled] [size=64K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [60] Express Legacy Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Virtual Channel
        Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
        Capabilities: [170] Power Budgeting <?>

[    1.604742] pci 0000:02:00.0: [168c:ff1c] type 00 class 0x020000
[    1.610801] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    1.617717] pci 0000:02:00.0: supports D1
[    1.621723] pci 0000:02:00.0: PME# supported from D0 D1 D3hot

You may see the the trunk cannot see correct PCI ID and some pci parameters like device serial numbers. Also any wifi modules does not work (mac80211, etc).


27.01.20213598PackagesBug ReportVery LowLowTrival Relay (trelay) should set up the relayed port in...openwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
VirtIO NIC - Software versions of OpenWrt/LEDE release, packages, etc.
OpenWrt 19.07.6 r11278
kmod-trelay - 4.14.215+0.1-2

- Steps to reproduce
Set up trival relay, /etc/config/trelay:

config trelay
option enabled 1
option dev1 eth0
option dev2 wlan0

The relay works only if eth0 is put in promiscuous mode. This can be easily handled by updating /etc/init.d/trelay to set it up automatically:

ip link set dev “$dev1” up
ip link set dev “$dev1” promisc on
ip link set dev “$dev2” up


09.05.20203079Base systemBug ReportVery LowHighTraceback when booting OpenWrt 19.07.2 on Netgear r7500...TrunkUnconfirmed Task Description

My Netgear r7500v2 running OpenWrt 19.07.2 always shows the following traceback when booting up.

[ 31.917130] ————[ cut here ]———— [ 31.917192] WARNING: CPU: 1 PID: 1938 at backports-4.19.98-1/net/wireless/util.c:1147 0xbf2e3d88 [cfg80211@bf2df000+0×37000]
[ 31.920831] invalid rate bw=0, mcs=15, nss=4
[ 31.932143] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT wireguard slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip6_udp_tunnel udp_tunnel uas usb_storage f2fs ext4 mbcache jbd2 crc32c_generic crc32_generic leds_gpio xhci_plat_hcd
[ 31.985373] xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug
[ 32.007657] CPU: 1 PID: 1938 Comm: hostapd Not tainted 4.14.171 #0
[ 32.025242] Hardware name: Generic DT based system
[ 32.031323] Function entered at [<c030f1c4>] from [<c030b390>]
[ 32.036095] Function entered at [<c030b390>] from [<c07c0664>]
[ 32.041911] Function entered at [<c07c0664>] from [<c031fa98>]
[ 32.047727] Function entered at [<c031fa98>] from [<c031faf8>]
[ 32.053544] Function entered at [<c031faf8>] from [<bf2e3d88>]
[ 32.059386] Function entered at [<bf2e3d88>] from [<bf2f17dc>]
[ 32.065179] Function entered at [<bf2f17dc>] from [<bf2fe5f4>]
[ 32.070992] Function entered at [<bf2fe5f4>] from [<bf2ff1e8>]
[ 32.076806] Function entered at [<bf2ff1e8>] from [<bf332ad0>]
[ 32.082632] Function entered at [<bf332ad0>] from [<bf332b60>]
[ 32.088438] Function entered at [<bf332b60>] from [<bf332bf8>]
[ 32.094255] Function entered at [<bf332bf8>] from [<bf2ed678>]
[ 32.100071] Function entered at [<bf2ed678>] from [<c06e190c>]
[ 32.105887] Function entered at [<c06e190c>] from [<c06e0128>]
[ 32.111702] Function entered at [<c06e0128>] from [<c06e0900>]
[ 32.117517] Function entered at [<c06e0900>] from [<c06df938>]
[ 32.123334] Function entered at [<c06df938>] from [<c06dfd54>]
[ 32.129150] Function entered at [<c06dfd54>] from [<c0689c18>]
[ 32.134967] Function entered at [<c0689c18>] from [<c068a480>]
[ 32.140782] Function entered at [<c068a480>] from [<c0307b60>]
[ 32.146678] —[ end trace 97f7e93c858c392e ]—

28.01.20213601OtherBug ReportVery LowLowtplink-safeloader: Unexpected firmware offset when read...TrunkUnconfirmed Task Description

I was trying to return to oem firmware for TL-WPA8630P V2.1 by following the instructions at https://openwrt.org/toh/tp-link/tp-link_tl-wpa8630p_v2#reverting_to_stock

When running tplink-safeloader it fails with the error message:

DEBUG: can not find fwuphdr
Error can not read the partition table (fwup-ptn): Success

I think the problem is that the firmware offset is “wrong” in tplink-safeloader or in the firmware file.

Here’s what the firmware file looks like:

00000000  fb b0 40 4b 3d ef 81 6e  ed 61 ac 42 7a 7a 86 e4  |..@K=..n.a.Bzz..|
00000010  00 6d 79 d7 3f 4e 45 57  00 00 00 28 00 64 de 8f  |.my.?NEW...(.d..|
00000020  00 6d 22 8f 00 00 00 00  00 64 de 53 c8 cb b9 c0  |.m"......d.S....|
00000030  25 21 80 2a d0 c6 39 eb  17 c6 73 64 00 64 de 53  |%!.*..9...sd.d.S|
00000040  0b a1 cb 12 8c 9e 34 9e  40 9d c8 9d 92 a5 03 cd  |......4.@.......|
00000050  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
00001050  66 77 75 70 2d 70 74 6e  20 6f 73 2d 69 6d 61 67  |fwup-ptn os-imag|
00001060  65 20 62 61 73 65 20 30  78 30 31 30 30 30 20 73  |e base 0x01000 s|

Ie, “fwup-ptn” is at 0×1050 while tplink-safeloader seems to look at 0×1014:

size_t firmware_offset = 0x1014;

I changed firmware_offset to 0×1050 and recompiled tplink-safeloader, then it works (but I don’t know if the output firmware is correct or not).

- Steps to reproduce

1. Get the firmware file from https://www.tp-link.com/en/support/download/tl-wpa8630p/v2.1/#Firmware 2. Extract the firmware archive
3. Run “tplink-safeloader -z wpa8630pv2_uk-up-ver2-1-0-P1-20171117-rel42724-APPLC.bin -o oem-sysupgrade.bin”

07.07.20213919Base systemBug ReportVery LowLowTPLink RE450 wrong DTSTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on:
TPLink RE450 v2

- Software versions of OpenWrt/LEDE release, packages, etc.
openwrt snapshot 21.02

- Steps to reproduce
install basic firmware, check for available space, which is <500kB even if the firmware is 5MB and the device has 8MB flash.

Apparently wrong dts here: https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts in particular:

partition@630000 {
	label = "config";
	reg = <0x630000 **0x020000**>;
	read-only;
};
art: partition@7f0000 {
	label = "art";
	reg = <0x7f0000 0x010000>;
	read-only;
};

should be changed to:

partition@630000 {
	label = "config";
	reg = <0x630000 **0x01c0000**>;
	read-only;
};
art: partition@7f0000 {
	label = "art";
	reg = <0x7f0000 0x010000>;
	read-only;
};
 


Showing tasks 151 - 200 of 1430 Page 4 of 29<<First - 2 - 3 - 4 - 5 - 6 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing