OpenWrt/LEDE Project

Welcome to the OpenWrt/LEDE Project bug reporting and issue tracking system

Problems to be reported here are for the OpenWrt/LEDE Project targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt/LEDE Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to lede-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeveritySummaryReported InStatus  desc
27.12.20192698Base systemBug ReportVery LowMediumnetifd DFS-delayed wireless interfaces not correctly ha...TrunkRequires testing Task Description

Found on TP-Link Archer C7 v4 on master (commit db992e7b53 - 5 days ago).

When having 3 interfaces on channel requiring radar scan (DFS), only the main interface is shown - see logs, where radio0 wifi should have 3 interfaces wlan0-lan, wlan0-guest and wlan0-admin, but only wlan0-lan is shown. Due to DFS scan it comes up after a minute after `/etc/init.d/network start` is executed.

Configuration:

  • 2 wifis: 2,4GHz (radio1) + 5GHz (radio0)
  • each band has 3 SSIDs (domaci-soukroma, domaci, domaci-admin), each one’s interface assigned to one bridge - lan, guest and admin, respectively.

Called `ubus call network.wireless status`, received result:

  • wlan0-lan exists
  • wlan0-guest and wlan0-admin not recognised
  • wlan1-lan, wlan1-guest, wlan1-admin exist

Expected result:

  • wlan0-guest and wlan0-admin recognised

Configuration, logread (produced by `/sbin/netifd -d 15 -l 7`), `ubus network.device status` and `ubus network.wireless status` attached (removed IP and MAC addresses).

06.02.2017472Base systemBug ReportVery LowMedium6to4 support with 1:1 natTrunkWaiting on reporter Task Description

One-to-one NAT means you have LAN address on interface and its mapped 1:1 to external ip addresses.
You can have incoming connections.

In such configuration “ipaddr” must be specified in 6to4 protocol section.
But due to bug this addr is submitted as local address for tunnel creation.
It does not work.

I fixed this with the following patch to /lib/netifd/proto/6to4.sh

48,53c48,53
< [ -z “$ipaddr” ] && {
< if ! network_get_ipaddr ipaddr “$wanif”; then
< proto_notify_error “$cfg” “NO_WAN_ADDRESS” < return
< fi
< }

if ! network_get_ipaddr ipladdr “$wanif”; then
> proto_notify_error “$cfg” “NO_WAN_ADDRESS”
return
> fi
>
> [ -z “$ipaddr” ] && ipaddr=$ipladdr
76c76
< json_add_string local “$ipaddr”

json_add_string local “$ipladdr”

I suggest you integrate this patch or do something similar yourself.

19.10.20171076PackagesBug ReportVery LowHighBugs about QCA9886AllWaiting on reporter Task Description

Supply the following if possible:
- Device problem occurs on archer-c58-v1
- Software versions of LEDE release is the latest master version, and other versions have same bug.

  I noticed the memory is leaking after connected serveral devices with QCA9886,

that will cause system crash in the end. Before leaking, WIFI can work fine, but when memory is leaking, WIFI can not work anymore.

  My OS is latest lede(mac80211 version is backports-2017-10-06), 

and the board can work with QSDK.

  If you need more detail information, please let me know.
 


07.04.20181473OtherBug ReportVery LowLowUSB connects then disconnects later in bootTrunkWaiting on reporter Task Description

The Device that this problem occurs on is Netgear WNDR3700v3. I’m using 17.01.04 release of openwrt.
Long story made short, the issue is that USB connects, then later in startup of the router it disconnects and when fully booted it can’t be seen using ‘fdisk -l’ nor can it be mounted (/dev/sda1)...

Installed packages are the ones included in the build + usb-core and its dependencies.

To reproduce this issue:

1.Do standard setup the router ( setup wan, setup lan, switch wifi on).
2.Install packages required for usb functionality.
3.Insert usb and reboot.

You will see during boot that usb light flashes few times and then after boot stops flashing/working. That can be confirmed by dmesg.

[    0.000000] Linux version 4.4.92 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3104-41de9a2) ) #0 Tue Oct 17 17:46:20 2017
[    0.000000] CPU0 revision is: 00019740 (MIPS 74Kc)
[    0.000000] bcm47xx: Using bcma bus
[    0.000000] bcma: bus0: Found chip with id 0x4716, rev 0x01 and package 0x0A
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 8034e4c0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 60940K/65536K available (2979K kernel code, 134K rwdata, 368K rodata, 156K init, 294K bss, 4596K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:128
[    0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x1F, class 0x0)
[    0.000000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0)
[    0.000000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0)
[    0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x01, class 0x0)
[    0.000000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0) 
[    0.000000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0)
[    0.000000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
[    0.000000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0)
[    0.000000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0)
[    0.000000] bcma: bus0: Found rev 5 PMU (capabilities 0x11242C05)
[    0.000000] bcma: bus0: Found serial flash
[    0.000000] bcma: bus0: Found M25P64 serial flash (size: 8192KiB, blocksize: 0x10000, blocks: 128)
[    0.000000] bcma: bus0: Early bus registered
[    0.000000] MIPS: machine is Unknown Board
[    0.000000] bcm47xx: Setting up vectored interrupts
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7963585194 ns
[    0.000015] sched_clock: 32 bits at 240MHz, resolution 4ns, wraps every 8947848189ns
[    0.000083] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
[    0.070033] pid_max: default: 32768 minimum: 301
[    0.070283] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070311] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.074095] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.074144] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.075341] NET: Registered protocol family 16
[    0.076346] Can't analyze schedule() prologue at 800077c8
[    0.095859] clocksource: Switched to clocksource MIPS
[    0.097957] NET: Registered protocol family 2
[    0.099548] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.099608] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.099647] TCP: Hash tables configured (established 1024 bind 1024)
[    0.099818] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.099865] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.100398] NET: Registered protocol family 1
[    0.100494] PCI: CLS 0 bytes, default 32
[    0.515000] bcma: bus0: Using SPROM revision 8 provided by platform.
[    0.515042] bcma: bus0: PMU resource config unknown or not needed for device 0x4716
[    0.517109] bcma: bus0: Workarounds unknown or not needed for device 0x4716
[    0.517134] bcma: bus0: Initializing MIPS core...
[    0.517163] bcma: bus0: set_irq: core 0x0812, irq 3 => 3
[    0.517186] bcma: bus0: set_irq: core 0x082d, irq 4 => 4
[    0.517207] bcma: bus0: set_irq: core 0x0819, irq 5 => 5
[    0.517229] bcma: bus0: set_irq: core 0x0820, irq 6 => 6
[    0.517249] bcma: bus0: set_irq: core 0x0800, irq 2 => 2
[    0.517269] bcma: bus0: set_irq: core 0x0834, irq 2 => 2
[    0.517284] bcma: bus0: IRQ reconfiguration done
[    0.517300] bcma: core 0x0800, irq : 2(S)* 3  4  5  6  D  I
[    0.517350] bcma: core 0x0812, irq : 2(S)  3* 4  5  6  D  I
[    0.517392] bcma: core 0x082d, irq : 2(S)  3  4* 5  6  D  I
[    0.517433] bcma: core 0x082c, irq : 2(S)  3  4  5  6  D  I*
[    0.517475] bcma: core 0x0819, irq : 2(S)  3  4  5* 6  D  I
[    0.517517] bcma: core 0x0820, irq : 2(S)  3  4  5  6* D  I
[    0.517558] bcma: core 0x082e, irq : 2(S)  3  4  5  6  D* I
[    0.517599] bcma: core 0x080e, irq : 2(S)  3  4  5  6  D  I*
[    0.517639] bcma: core 0x0834, irq : 2(S)* 3  4  5  6  D  I
[    0.517683] bcma: bus0: PCIEcore in host mode found
[    0.701176] PCI host bridge to bus 0000:00
[    0.701231] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0bffffff]
[    0.701260] pci_bus 0000:00: root bus resource [io  0x0100-0x07ff]
[    0.701289] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.701318] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.701400] pci 0000:00:00.0: [14e4:4716] type 00 class 0x060000
[    0.701443] bcma: PCI: Fixing up bridge 0000:00:00.0
[    0.701464] bcma: PCI: Fixing up device 0000:00:00.0
[    0.701528] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    0.701568] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x07ffffff 64bit]
[    0.701674] pci 0000:00:00.0: supports D1 D2
[    0.702056] pci 0000:00:00.1: [14e4:0000] type 00 class 0x060000
[    0.702103] bcma: PCI: Fixing up bridge 0000:00:00.1
[    0.702124] bcma: PCI: Fixing up device 0000:00:00.1
[    0.702187] pci 0000:00:00.1: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    0.702227] pci 0000:00:00.1: reg 0x18: [mem 0x00000000-0x07ffffff 64bit]
[    0.702325] pci 0000:00:00.1: supports D1 D2
[    0.702763] pci 0000:00:01.0: [14e4:4331] type 00 class 0x028000
[    0.702894] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    0.702991] bcma: PCI: Fixing up addresses 0000:00:01.0
[    0.703037] pci 0000:00:01.0: BAR 0: assigned [mem 0x08000000-0x08003fff 64bit]
[    0.703200] pci 0000:00:01.0: supports D1 D2
[    0.703605] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.705142] bcma: bus0: Bus registered
[    0.706323] Crashlog allocated RAM at address 0x3f00000
[    0.737420] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.737451] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.742243] io scheduler noop registered
[    0.742278] io scheduler deadline registered (default)
[    0.742710] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.747752] console [ttyS0] disabled
[    0.767993] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2, base_baud = 1250000) is a U6_16550A
[    1.271345] console [ttyS0] enabled
[    1.383454] 7 bcm47xxpart partitions found on MTD device bcm47xxsflash
[    1.390163] Creating 7 MTD partitions on "bcm47xxsflash":
[    1.395669] 0x000000000000-0x000000040000 : "boot"
[    1.404675] 0x000000040000-0x0000007e0000 : "firmware"
[    1.412942] 0x0000007e0000-0x0000007f0000 : "board_data"
[    1.421384] 0x0000007f0000-0x000000800000 : "nvram"
[    1.429424] 0x00000004001c-0x00000004091c : "loader"
[    1.437592] 0x00000004091c-0x000000166000 : "linux"
[    1.445531] 0x000000166000-0x0000007e0000 : "rootfs"
[    1.453634] mtd: device 6 (rootfs) set to be root filesystem
[    1.459556] 1 squashfs-split partitions found on MTD device rootfs
[    1.465900] 0x0000003a0000-0x0000007e0000 : "rootfs_data"
[    1.477763] libphy: Fixed MDIO Bus: probed
[    1.482172] bgmac_bcma bcma0:2: Found PHY addr: 30 (NOREGS)
[    1.491131] libphy: bcma_mdio mii bus: probed
[    1.495592] bgmac_bcma bcma0:2: Support for Roboswitch not implemented
[    1.656300] b53_common: found switch: BCM53115, rev 8
[    1.662752] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[    1.669147] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
[    1.677188] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[    1.682952] bcma: PCI: Fixing up device 0000:00:01.0
[    1.688087] bcma: change PCIe max read request size from 512 to 128
[    1.694521] bcma: bus1: Found chip with id 0x4331, rev 0x02 and package 0x08
[    1.701786] bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
[    1.710541] bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0)
[    1.719387] bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0)
[    1.727658] bcma: bus1: Found rev 10 PMU (capabilities 0x108C260A)
[    1.727690] bcma: bus1: SPROM offset 0x800
[    1.851848] bcma: bus1: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
[    2.046785] bcma: bus1: Using SPROM revision 9 provided by platform.
[    2.046829] bcma: bus1: PMU resource config unknown or not needed for device 0x4331
[    2.057502] bcma: bus1: Bus registered
[    2.063308] NET: Registered protocol family 10
[    2.072711] NET: Registered protocol family 17
[    2.077480] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.090356] 8021q: 802.1Q VLAN Support v1.8
[    2.104187] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
[    2.112500] Freeing unused kernel memory: 156K
[    3.754063] init: Console is alive
[    3.758057] init: - watchdog -
[    4.878998] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.017988] usbcore: registered new interface driver usbfs
[    5.023754] usbcore: registered new interface driver hub
[    5.029472] usbcore: registered new device driver usb
[    5.042546] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.051645] ehci-platform: EHCI generic platform driver
[    5.057233] ehci-platform ehci-platform.0: EHCI Host Controller
[    5.063363] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[    5.071819] ehci-platform ehci-platform.0: irq 5, io mem 0x18004000
[    5.095922] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[    5.104198] hub 1-0:1.0: USB hub found
[    5.108771] hub 1-0:1.0: 2 ports detected
[    5.117596] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.126043] ohci-platform: OHCI generic platform driver
[    5.131512] ohci-platform ohci-platform.0: Generic Platform OHCI controller
[    5.138753] ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
[    5.147160] ohci-platform ohci-platform.0: irq 5, io mem 0x18009000
[    5.211640] hub 2-0:1.0: USB hub found
[    5.216336] hub 2-0:1.0: 2 ports detected
[    5.224214] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.242340] init: - preinit -
[    5.608070] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    5.864264] random: procd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
[    5.889247] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.865937] bgmac_bcma bcma0:2 eth0: Link is Up - 1Gbps/Full - flow control off
[    7.873468] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.273926] jffs2: notice: (342) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   10.303649] mount_root: loading kmods from internal overlay
[   10.724352] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   11.373272] SCSI subsystem initialized
[   11.419230] uhci_hcd: USB Universal Host Controller Interface driver
[   11.454632] usb-storage 1-1:1.0: USB Mass Storage device detected
[   11.462745] scsi host0: usb-storage 1-1:1.0
[   11.468012] usbcore: registered new interface driver usb-storage
[   11.475786] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   11.882238] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   11.892225] block: extroot: not configured
[   11.897883] mount_root: switching to jffs2 overlay
[   11.912369] urandom-seed: Seeding with /etc/urandom.seed
[   12.092045] procd: - early -
[   12.095211] procd: - watchdog -
[   12.831439] scsi 0:0:0:0: Direct-Access     FLASH    Drive SM_USB20   3000 PQ: 0 ANSI: 0 CCS
[   12.845660] sd 0:0:0:0: [sda] 3932160 512-byte logical blocks: (2.01 GB/1.88 GiB)
[   12.866047] sd 0:0:0:0: [sda] Write Protect is off
[   12.871009] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[   12.872568] sd 0:0:0:0: [sda] No Caching mode page found
[   12.878114] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   12.900092]  sda: sda1 sda2
[   12.912389] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   13.408590] procd: - watchdog -
[   13.413238] procd: - ubus -
[   13.575271] random: ubusd: uninitialized urandom read (4 bytes read, 49 bits of entropy available)
[   13.589064] random: ubusd: uninitialized urandom read (4 bytes read, 49 bits of entropy available)
[   13.599754] random: ubusd: uninitialized urandom read (4 bytes read, 49 bits of entropy available)
[   13.609582] random: ubusd: uninitialized urandom read (4 bytes read, 49 bits of entropy available)
[   13.621827] random: ubusd: uninitialized urandom read (4 bytes read, 49 bits of entropy available)
[   13.631285] random: ubusd: uninitialized urandom read (4 bytes read, 49 bits of entropy available)
[   13.641747] random: ubusd: uninitialized urandom read (4 bytes read, 51 bits of entropy available)
[   13.652513] random: ubusd: uninitialized urandom read (4 bytes read, 51 bits of entropy available)
[   13.664938] procd: - init -
[   14.978977] kmodloader: loading kernel modules from /etc/modules.d/*
[   14.994949] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   15.021509] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[   15.029742] Backport generated by backports.git backports-20160324-13-g24da7d3c
[   15.042765] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.063214] nf_conntrack version 0.5.0 (954 buckets, 3816 max)
[   15.125836] xt_time: kernel timezone is -0000
[   15.219516] PPP generic driver version 2.4.2
[   15.229060] NET: Registered protocol family 24
[   15.251342] b43-phy0: Broadcom 4716 WLAN found (core revision 17)
[   15.258525] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 5
[   15.264740] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2056, Revision 7, Version 0
[   15.273031] b43-phy1: Broadcom 4331 WLAN found (core revision 29)
[   15.279362] bcma: bus1: Switched to core: 0x812
[   15.286208] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.306006] b43-phy1: Found PHY: Analog 9, Type 7 (HT), Revision 1
[   15.312319] b43-phy1: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
[   15.319890] b43-phy1 warning: 5 GHz band is unsupported on this PHY
[   15.340847] Broadcom 43xx driver loaded [ Features: NL ]
[   15.350173] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   15.476055] kmodloader: done loading kernel modules from /etc/modules.d/*
[   17.239669] random: jshn: uninitialized urandom read (4 bytes read, 81 bits of entropy available)
[   27.045316] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.094907] device eth0.1 entered promiscuous mode
[   27.099903] device eth0 entered promiscuous mode
[   27.140638] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   27.388545] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   28.346008] bgmac_bcma bcma0:2 eth0: Link is Up - 1Gbps/Full - flow control off
[   28.353541] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   28.530202] br-lan: port 1(eth0.1) entered forwarding state
[   28.536077] br-lan: port 1(eth0.1) entered forwarding state
[   28.541946] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   28.616063] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   30.535925] br-lan: port 1(eth0.1) entered forwarding state
[   32.126060] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   32.134511] usb 1-1: USB disconnect, device number 2
[   32.437880] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.478559] device wlan0 entered promiscuous mode
[   32.546447] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   32.553223] br-lan: port 2(wlan0) entered forwarding state
[   32.559023] br-lan: port 2(wlan0) entered forwarding state
[   34.555927] br-lan: port 2(wlan0) entered forwarding state
[   37.215918] random: nonblocking pool is initialized
22.07.20181684Base systemBug ReportVery LowLow18.06.0-rc2 dos not save settings when applyed ramips/r...TrunkWaiting on reporter Task Description

D-Link DIR-615 D but using a D2 version
18.06.0-rc2 but 17.01.5 is working fine!
OpenWrt 18.06.0-rc2 r7141-e4d0ee5af5

I have a issue with Luci or maybe is issue with ramips/rt305x device’s but when i go to apply settings in the webgui and reboot my d-link it goes back to the default openwrt settings however 17.01.5 is working fine no issue here but 18.06.0-rc2 is a no no unless i manual change them in the SSH/SCP folder.

Just to be clear when save&apply is ok but once reboot or turn off by the mains power it resolves into default settings.

25.07.20181692PackagesBug ReportVery LowMediumDDNS seems to not use ca-certificatesTrunkWaiting on reporter Task Description

On 18.06 rc2 I have to type “IGNORE” in the “Path to ca-file” field. Otherwise I always get this error:

Wed Jul 25 23:31:21 2018 user.err ddns-scripts[1745]: myddns_ipv4: cURL Error: ‘77’ Wed Jul 25 23:31:22 2018 user.warn ddns-scripts[1745]: myddns_ipv4: Transfer failed - retry 1/0 in 60 seconds

The ca-certificates package is installed. On 18.06 rc1 I got not this error.

10.08.20181765Base systemBug ReportVery LowMediumdnsmasq-full fails to listen on dhcp socket after reboo...openwrt-19.07Waiting on reporter Task Description

When I restart my router, dnsmasq comes up and works for IPv6, but fails to serve out dhcp for ipv4.

Supply the following if possible:
- Device problem occurs on

Ubiquiti Edgerouter Lite

- Software versions of OpenWrt/LEDE release, packages, etc.

OpenWrt 18.06.0, r7188-b0b5c64c22
dnsmasq-full - 2.80test3-1

- Steps to reproduce

Reboot the router. When it comes up just after reboot, it fails to respond to DHCP requests. lsof shows that it’s not listening on port 67, and does not have /tmp/dhcp.leases open:

root@junction:~# lsof -p 1792 -P
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
dnsmasq 1792 dnsmasq cwd DIR 0,15 3488 1166 /
dnsmasq 1792 dnsmasq rtd DIR 0,15 3488 1166 /
dnsmasq 1792 dnsmasq txt REG 7,0 349744 1526 /usr/sbin/dnsmasq
dnsmasq 1792 dnsmasq mem REG 7,0 16776 189 /usr/lib/libmnl.so.0.2.0
dnsmasq 1792 dnsmasq mem REG 8,2 117320 1033 /lib/libgcc_s.so.1
dnsmasq 1792 dnsmasq mem REG 8,2 25440 1114 /lib/libubus.so
dnsmasq 1792 dnsmasq mem REG 8,2 46168 1029 /lib/libubox.so
dnsmasq 1792 dnsmasq mem REG 7,0 466112 696 /usr/lib/libgmp.so.10.3.2
dnsmasq 1792 dnsmasq mem REG 7,0 206656 702 /usr/lib/libhogweed.so.4.3
dnsmasq 1792 dnsmasq mem REG 7,0 231888 704 /usr/lib/libnettle.so.6.3
dnsmasq 1792 dnsmasq mem REG 7,0 22232 216 /usr/lib/libnfnetlink.so.0.2.0
dnsmasq 1792 dnsmasq mem REG 7,0 111864 561 /usr/lib/libnetfilter_conntrack.so.3.6.0
dnsmasq 1792 dnsmasq mem REG 8,2 650896 1012 /lib/libc.so
dnsmasq 1792 dnsmasq mem REG 0,14 23 713 /tmp/TZ
dnsmasq 1792 dnsmasq 0u CHR 1,3 0t0 1226 /dev/null
dnsmasq 1792 dnsmasq 1u CHR 1,3 0t0 1226 /dev/null
dnsmasq 1792 dnsmasq 2u CHR 1,3 0t0 1226 /dev/null
dnsmasq 1792 dnsmasq 3u netlink 0t0 3561 ROUTE
dnsmasq 1792 dnsmasq 4u IPv4 3568 0t0 UDP junction:53
dnsmasq 1792 dnsmasq 5u IPv4 3569 0t0 TCP junction:53 (LISTEN)
dnsmasq 1792 dnsmasq 6u IPv4 3570 0t0 UDP localhost:53
dnsmasq 1792 dnsmasq 7u IPv4 3571 0t0 TCP localhost:53 (LISTEN)
dnsmasq 1792 dnsmasq 8u IPv6 3572 0t0 UDP localhost:53
dnsmasq 1792 dnsmasq 9u IPv6 3573 0t0 TCP localhost:53 (LISTEN)
dnsmasq 1792 dnsmasq 10r FIFO 0,8 0t0 3574 pipe
dnsmasq 1792 dnsmasq 11w FIFO 0,8 0t0 3574 pipe
dnsmasq 1792 dnsmasq 12u unix 0x800000041d16ca00 0t0 3576 type=DGRAM
dnsmasq 1792 dnsmasq 13u a_inode 0,9 0 14 [eventpoll]
dnsmasq 1792 dnsmasq 14r FIFO 0,8 0t0 3598 pipe
dnsmasq 1792 dnsmasq 15w FIFO 0,8 0t0 3598 pipe
dnsmasq 1792 dnsmasq 16u unix 0x800000041d16d900 0t0 3599 type=STREAM
dnsmasq 1792 dnsmasq 21u IPv6 3729 0t0 UDP fe80::822a:a8ff:fe4c:9dc1:53
dnsmasq 1792 dnsmasq 22u IPv6 3730 0t0 TCP fe80::822a:a8ff:fe4c:9dc1:53 (LISTEN)
dnsmasq 1792 dnsmasq 26u IPv6 3745 0t0 UDP fd90:79d3:5065:f00d::1:53
dnsmasq 1792 dnsmasq 27u IPv6 3746 0t0 TCP fd90:79d3:5065:f00d::1:53 (LISTEN)
dnsmasq 1792 dnsmasq 35u IPv6 6049 0t0 UDP cpe-2606-A000-1100-DB-0-0-0-1.dyn6.twc.com:53
dnsmasq 1792 dnsmasq 36u IPv6 6050 0t0 TCP cpe-2606-A000-1100-DB-0-0-0-1.dyn6.twc.com:53 (LISTEN)

...if I then restart it with “/etc/init.d/dnsmasq restart”, it comes up properly. The router

COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
dnsmasq 6861 dnsmasq cwd DIR 0,15 3488 1166 /
dnsmasq 6861 dnsmasq rtd DIR 0,15 3488 1166 /
dnsmasq 6861 dnsmasq txt REG 7,0 349744 1526 /usr/sbin/dnsmasq
dnsmasq 6861 dnsmasq mem REG 7,0 16776 189 /usr/lib/libmnl.so.0.2.0
dnsmasq 6861 dnsmasq mem REG 8,2 117320 1033 /lib/libgcc_s.so.1
dnsmasq 6861 dnsmasq mem REG 8,2 25440 1114 /lib/libubus.so
dnsmasq 6861 dnsmasq mem REG 8,2 46168 1029 /lib/libubox.so
dnsmasq 6861 dnsmasq mem REG 7,0 466112 696 /usr/lib/libgmp.so.10.3.2
dnsmasq 6861 dnsmasq mem REG 7,0 206656 702 /usr/lib/libhogweed.so.4.3
dnsmasq 6861 dnsmasq mem REG 7,0 231888 704 /usr/lib/libnettle.so.6.3
dnsmasq 6861 dnsmasq mem REG 7,0 22232 216 /usr/lib/libnfnetlink.so.0.2.0
dnsmasq 6861 dnsmasq mem REG 7,0 111864 561 /usr/lib/libnetfilter_conntrack.so.3.6.0
dnsmasq 6861 dnsmasq mem REG 8,2 650896 1012 /lib/libc.so
dnsmasq 6861 dnsmasq mem REG 0,14 23 713 /tmp/TZ
dnsmasq 6861 dnsmasq 0u CHR 1,3 0t0 1226 /dev/null
dnsmasq 6861 dnsmasq 1u CHR 1,3 0t0 1226 /dev/null
dnsmasq 6861 dnsmasq 2u CHR 1,3 0t0 1226 /dev/null
dnsmasq 6861 dnsmasq 3u REG 0,14 0 806 /tmp/dhcp.leases
dnsmasq 6861 dnsmasq 4u IPv4 10060 0t0 UDP *:bootps
dnsmasq 6861 dnsmasq 5u netlink 0t0 10061 ROUTE
dnsmasq 6861 dnsmasq 6u IPv4 10063 0t0 UDP junction:domain
dnsmasq 6861 dnsmasq 7u IPv4 10064 0t0 TCP junction:domain (LISTEN)
dnsmasq 6861 dnsmasq 8u IPv4 10065 0t0 UDP localhost:domain
dnsmasq 6861 dnsmasq 9u IPv4 10066 0t0 TCP localhost:domain (LISTEN)
dnsmasq 6861 dnsmasq 10u IPv6 10067 0t0 UDP fe80::822a:a8ff:fe4c:9dc1:domain
dnsmasq 6861 dnsmasq 11u IPv6 10068 0t0 TCP fe80::822a:a8ff:fe4c:9dc1:domain (LISTEN)
dnsmasq 6861 dnsmasq 12u IPv6 10069 0t0 UDP fd90:79d3:5065:f00d::1:domain
dnsmasq 6861 dnsmasq 13u IPv6 10070 0t0 TCP fd90:79d3:5065:f00d::1:domain (LISTEN)
dnsmasq 6861 dnsmasq 14u IPv6 10071 0t0 UDP cpe-2606-A000-1100-DB-0-0-0-1.dyn6.twc.com:domain
dnsmasq 6861 dnsmasq 15u IPv6 10072 0t0 TCP cpe-2606-A000-1100-DB-0-0-0-1.dyn6.twc.com:domain (LISTEN)
dnsmasq 6861 dnsmasq 16u IPv6 10073 0t0 UDP localhost:domain
dnsmasq 6861 dnsmasq 17u IPv6 10074 0t0 TCP localhost:domain (LISTEN)
dnsmasq 6861 dnsmasq 18r FIFO 0,8 0t0 10075 pipe
dnsmasq 6861 dnsmasq 19w FIFO 0,8 0t0 10075 pipe
dnsmasq 6861 dnsmasq 20u unix 0x800000041c446300 0t0 10077 type=DGRAM
dnsmasq 6861 dnsmasq 21u a_inode 0,9 0 14 [eventpoll]
dnsmasq 6861 dnsmasq 22r FIFO 0,8 0t0 10078 pipe
dnsmasq 6861 dnsmasq 23w FIFO 0,8 0t0 10078 pipe
dnsmasq 6861 dnsmasq 24u unix 0x800000041c445e00 0t0 10079 type=STREAM

When I restart the daemon, I see these messages in the log as well:

Fri Aug 10 09:46:50 2018 daemon.info dnsmasq-dhcp[6861]: DHCP, IP range 192.168.1.100 – 192.168.1.249, lease time 12h
Fri Aug 10 09:46:50 2018 daemon.info dnsmasq-dhcp[6861]: DHCP, sockets bound exclusively to interface br-lan

...but they are absent when the daemon starts on a clean boot.

Attaching my /etc/config/dhcp, and the output from logread.

15.08.20181781Base systemBug ReportVery LowMedium"/sbin/block detect" reports improper uuid for raid par...AllWaiting on reporter Task Description

This bug is device independent (I think).

As a result of this bug, /etc/config/fstab may contain damaged content, and also block mount may fail.

‘block detect’ reports bad uuid for /dev/sda1 (and others) mixing inside uuid of raid volume with outside of the partitions.
Bug is ‘block detect’ showing the same uuid for /dev/sda1 and /dev/md1 while they are different, as you can observe in /sbin/blkid output at the middle of output below.

Important: /sbin/blkid from busybox may have same/similar bug as its reporting even different uuid. The standalone /usr/sbin/blkid works properly (shown in the middle of below) and should be basis for comparison.

root@bee:/tmp# block detect
config 'global'
        option  anon_swap       '0'
        option  anon_mount      '0'
        option  auto_swap       '1'
        option  auto_mount      '1'
        option  delay_root      '5'
        option  check_fs        '0'

config 'mount'
        option  target  '/mnt/sda1'
        option  uuid    '48f38899-5efb-4477-adca-bf11d81df99f'
        option  enabled '0'

config 'mount'
        option  target  '/mnt/sdb1'
        option  uuid    '48f38899-5efb-4477-adca-bf11d81df99f'
        option  enabled '0'

config 'mount'
        option  target  '/mnt/md1'
        option  uuid    '48f38899-5efb-4477-adca-bf11d81df99f'
        option  enabled '0'


root@bee:/tmp# which blkid
/usr/sbin/blkid
root@bee:/tmp# blkid
/dev/mtdblock5: TYPE="squashfs"
/dev/sda1: UUID="8b2d137c-4973-133d-6de4-7e91c4a4cdb0" TYPE="linux_raid_member" PARTUUID="f6eb912c-6ef7-4b8b-90d7-3ccc4e05d0c3"
/dev/sdb1: UUID="8b2d137c-4973-133d-6de4-7e91c4a4cdb0" TYPE="linux_raid_member" PARTUUID="731a8023-5734-463e-8866-46ea97a3f928"
/dev/md1: LABEL="OVERLAYROOT" UUID="48f38899-5efb-4477-adca-bf11d81df99f" TYPE="ext4"


root@bee:/tmp# /sbin/blkid
/dev/md1: LABEL="OVERLAYROOT" UUID="48f38899-5efb-4477-adca-bf11d81df99f" TYPE="ext4"
/dev/sda1: UUID="7c132d8b-3d13-7349-917e-e46db0cda4c4" TYPE="linux_raid_member"
/dev/sdb1: UUID="7c132d8b-3d13-7349-917e-e46db0cda4c4" TYPE="linux_raid_member"
25.10.20181906PackagesBug ReportVery LowLowStatic lease doesn't work sometimesTrunkWaiting on reporter Task Description

Device: Xiaomi mi wifi mini
OpenWRT: SNAPSHOT r8377-70315fe144

If i reboot router or turn on it at the same time with PC static lease doesn’t work.

cat /etc/config/dhcp

config dnsmasq
        option domainneeded '1'
        option boguspriv '1'
        option filterwin2k '1'
        option localise_queries '1'
        option rebind_protection '1'
        option local '/[REDACTED]/'
        option domain '[REDACTED]'
        option expandhosts '1'
        option authoritative '1'
        option leasefile '/tmp/dhcp.leases'
        option nonwildcard '1'
        option localservice '0'
        option noresolv '1'
        list server '::1#5453'
        list server '127.0.0.1#5453'
        list rebind_domain '/[REDACTED]/'
        list server '[REDACTED]'
        option cachesize '1024'

config dhcp 'lan'
        option interface 'lan'
        option start '100'
        option limit '150'
        option leasetime '24h'
        option dhcpv6 'server'
        option ra 'server'

config dhcp 'wan'
        option interface 'wan'
        option ignore '1'

config odhcpd 'odhcpd'
        option maindhcp '0'
        option leasefile '/tmp/hosts/odhcpd'
        option leasetrigger '/usr/sbin/odhcpd-update'
        option loglevel '4'

config srvhost
[REDACTED]

config host
        option name 'wks1'
        option mac '60:a4:4c:ce:65:ac'
        option ip '172.16.9.10'

config domain
[REDACTED]

logread -e dnsmasq-dhcp

Thu Oct 25 07:43:05 2018 daemon.info dnsmasq-dhcp[1780]: DHCP, IP range 172.16.9.100 -- 172.16.9.249, lease time 1d
Thu Oct 25 07:43:19 2018 daemon.info dnsmasq-dhcp[1780]: DHCPDISCOVER(br-lan) 172.16.9.10 60:a4:4c:ce:65:ac
Thu Oct 25 07:43:19 2018 daemon.info dnsmasq-dhcp[1780]: DHCPOFFER(br-lan) 172.16.9.211 60:a4:4c:ce:65:ac
Thu Oct 25 07:43:19 2018 daemon.info dnsmasq-dhcp[1780]: DHCPREQUEST(br-lan) 172.16.9.211 60:a4:4c:ce:65:ac
Thu Oct 25 07:43:19 2018 daemon.info dnsmasq-dhcp[1780]: DHCPACK(br-lan) 172.16.9.211 60:a4:4c:ce:65:ac wks1

config.seed

CONFIG_TARGET_ramips=y
CONFIG_TARGET_ramips_mt7620=y
CONFIG_TARGET_ramips_mt7620_DEVICE_miwifi-mini=y
CONFIG_GETDNS_ENABLE_STUB_ONLY=y
CONFIG_LIBCURL_COOKIES=y
CONFIG_LIBCURL_FILE=y
CONFIG_LIBCURL_FTP=y
CONFIG_LIBCURL_HTTP=y
CONFIG_LIBCURL_NO_SMB="!"
CONFIG_LIBCURL_OPENSSL=y
CONFIG_LIBCURL_PROXY=y
CONFIG_OPENSSL_WITH_DEPRECATED=y
CONFIG_OPENSSL_WITH_EC=y
CONFIG_OPENSSL_WITH_NPN=y
CONFIG_OPENSSL_WITH_PSK=y
CONFIG_OPENSSL_WITH_SRP=y
CONFIG_PACKAGE_bind-dig=y
CONFIG_PACKAGE_bind-libs=y
CONFIG_PACKAGE_ca-bundle=y
CONFIG_PACKAGE_ca-certificates=y
CONFIG_PACKAGE_curl=y
CONFIG_PACKAGE_ddns-scripts=y
CONFIG_PACKAGE_ddns-scripts_cloudflare.com-v4=y
# CONFIG_PACKAGE_dnsmasq is not set
CONFIG_PACKAGE_dnsmasq-full=y
CONFIG_PACKAGE_dnsmasq_full_auth=y
CONFIG_PACKAGE_dnsmasq_full_conntrack=y
CONFIG_PACKAGE_dnsmasq_full_dhcp=y
CONFIG_PACKAGE_dnsmasq_full_dhcpv6=y
CONFIG_PACKAGE_dnsmasq_full_dnssec=y
CONFIG_PACKAGE_dnsmasq_full_ipset=y
CONFIG_PACKAGE_dnsmasq_full_noid=y
CONFIG_PACKAGE_getdns=y
CONFIG_PACKAGE_gre=y
CONFIG_PACKAGE_ip-full=y
CONFIG_PACKAGE_ipset=y
CONFIG_PACKAGE_kmod-gre=y
CONFIG_PACKAGE_kmod-gre6=y
CONFIG_PACKAGE_kmod-ip6-tunnel=y
CONFIG_PACKAGE_kmod-ipt-ipset=y
CONFIG_PACKAGE_kmod-iptunnel=y
CONFIG_PACKAGE_kmod-iptunnel6=y
CONFIG_PACKAGE_kmod-nf-conntrack-netlink=y
CONFIG_PACKAGE_kmod-nfnetlink=y
CONFIG_PACKAGE_kmod-udptunnel4=y
CONFIG_PACKAGE_kmod-udptunnel6=y
CONFIG_PACKAGE_kmod-wireguard=y
CONFIG_PACKAGE_libcurl=y
CONFIG_PACKAGE_libgmp=y
CONFIG_PACKAGE_libipset=y
CONFIG_PACKAGE_libmnl=y
CONFIG_PACKAGE_libnetfilter-conntrack=y
CONFIG_PACKAGE_libnettle=y
CONFIG_PACKAGE_libnfnetlink=y
CONFIG_PACKAGE_libopenssl=y
CONFIG_PACKAGE_libyaml=y
CONFIG_PACKAGE_resolveip=y
CONFIG_PACKAGE_stubby=y
CONFIG_PACKAGE_wireguard=y
CONFIG_PACKAGE_wireguard-tools=y
CONFIG_PACKAGE_zlib=y
08.11.20181940Base systemBug ReportVery LowLowCrash at at net/sched/sch_generic.cTrunkWaiting on reporter Task Description

It’s my first Bugreport here, so don’t blame me please using the wrong formatting or something.

Happend on a Xiaomi Mi Router 3G
Architecture: MediaTek MT7621 ver:1 eco:3
Firmware: OpenWrt SNAPSHOT r8121-9f0cb13 / LuCI Master (git-18.264.24000-89a4fdd)
Kernel Version: 4.14.71
Uptime: 21d 11h 4m 2s

~~~ Full Kern Log

[    0.000000] Linux version 4.14.71 (buildbot@crazyhorse) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r8121-9f0cb13)) #0 SMP Sun Sep 23 15:45:08 2018
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Xiaomi Mi Router 3G
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 10000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat 805c8280, node_mem_map 81003000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000] random: get_random_bytes called from start_kernel+0x90/0x4ac with crng_init=0
[    0.000000] percpu: Embedded 14 pages/cpu @81210000 s26256 r8192 d22896 u57344
[    0.000000] pcpu-alloc: s26256 r8192 d22896 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Writing ErrCtl register=0000b000
[    0.000000] Readback ErrCtl register=0000b000
[    0.000000] Memory: 253140K/262144K available (4646K kernel code, 241K rwdata, 1032K rodata, 212K init, 282K bss, 9004K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 256
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.007814] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.073975] pid_max: default: 32768 minimum: 301
[    0.078746] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.085253] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.094058] Hierarchical SRCU implementation.
[    0.099230] smp: Bringing up secondary CPUs ...
[    0.116621] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.116631] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.116643] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.116781] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.163977] Synchronize counters for CPU 1: done.
[    0.210735] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.210744] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.210754] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.210824] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.255104] Synchronize counters for CPU 2: done.
[    0.297768] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.297775] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.297784] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.297857] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.340281] Synchronize counters for CPU 3: done.
[    0.370143] smp: Brought up 1 node, 4 CPUs
[    0.377934] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.387726] futex hash table entries: 1024 (order: 3, 32768 bytes)
[    0.394028] pinctrl core: initialized pinctrl subsystem
[    0.400632] NET: Registered protocol family 16
[    0.414353] FPU Affinity set after 11720 emulations
[    0.415225] pull PCIe RST: RALINK_RSTCTRL = 4000000
[    0.720474] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.725520] ***** Xtal 40MHz *****
[    0.728878] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.733977] Port 0 N_FTS = 1b105000
[    0.737446] Port 1 N_FTS = 1b105000
[    0.740888] Port 2 N_FTS = 1b102800
[    1.896122] PCIE2 no card, disable it(RST&CLK)
[    1.900485]  -> 21007f2
[    1.902887] PCIE0 enabled
[    1.905476] PCIE1 enabled
[    1.908080] PCI host bridge /pcie@1e140000 ranges:
[    1.912860]  MEM 0x0000000060000000..0x000000006fffffff
[    1.918010]   IO 0x000000001e160000..0x000000001e16ffff
[    1.923209] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
[    1.939229] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.945101] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.950815] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.958511] PCI host bridge to bus 0000:00
[    1.962551] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    1.969378] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    1.975232] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    1.981991] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.989880] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    1.989921] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.989934] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
[    1.990001] pci 0000:00:00.0: supports D1
[    1.990010] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.990257] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    1.990297] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.990317] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
[    1.990379] pci 0000:00:01.0: supports D1
[    1.990389] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    1.990865] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
[    1.990921] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    1.991051] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.991264] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.991535] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
[    1.991599] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    1.991644] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.991740] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.991961] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    1.992035] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[    1.992102] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    1.998615] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.005547] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    2.012088] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.019018] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    2.025749] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
[    2.032501] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
[    2.039657] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
[    2.046417] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
[    2.053137] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
[    2.059887] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.064802] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    2.071560] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
[    2.078806] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
[    2.085980] pci 0000:00:01.0: PCI bridge to [bus 02]
[    2.090887] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
[    2.097639] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff pref]
[    2.106379] clocksource: Switched to clocksource GIC
[    2.112935] NET: Registered protocol family 2
[    2.118037] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    2.124921] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    2.131345] TCP: Hash tables configured (established 2048 bind 2048)
[    2.137749] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.143515] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.149965] NET: Registered protocol family 1
[    2.154283] PCI: CLS 0 bytes, default 32
[    2.386331] 4 CPUs re-calibrate udelay(lpj = 2924544)
[    2.392750] Crashlog allocated RAM at address 0x3f00000
[    2.398126] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[    2.408447] random: fast init done
[    2.414592] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.420435] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.433456] io scheduler noop registered
[    2.437354] io scheduler deadline registered (default)
[    2.443388] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    2.452695] console [ttyS0] disabled
[    2.456243] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
[    2.465254] console [ttyS0] enabled
[    2.472128] bootconsole [early0] disabled
[    2.480843] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    2.487749] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[    2.494804] Enable NFI Clock
[    2.497788] # MTK NAND # : Use HW ECC
[    2.501453] Device not found, ID: c8d1
[    2.505177] Not Support this Device! 
[    2.508922] chip_mode=00000001
[    2.511961] Support this Device in MTK table! c8d1 
[    2.516931] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
[    2.523390] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
[    2.529727] nand: ESMT NAND 128MiB 3,3V 8-bit
[    2.534064] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    2.541634] Scanning device for bad blocks
[    2.691286] 10 fixed-partitions partitions found on MTD device MT7621-NAND
[    2.698146] Creating 10 MTD partitions on "MT7621-NAND":
[    2.703441] 0x000000000000-0x000000080000 : "Bootloader"
[    2.709741] 0x000000080000-0x0000000c0000 : "Config"
[    2.715570] 0x0000000c0000-0x000000100000 : "Bdata"
[    2.721345] 0x000000100000-0x000000140000 : "Factory"
[    2.727279] 0x000000140000-0x000000180000 : "crash"
[    2.732950] 0x000000180000-0x0000001c0000 : "crash_syslog"
[    2.739379] 0x0000001c0000-0x000000200000 : "reserved0"
[    2.745415] 0x000000200000-0x000000600000 : "kernel_stock"
[    2.751846] 0x000000600000-0x000000a00000 : "kernel"
[    2.757731] 0x000000a00000-0x000007f80000 : "ubi"
[    2.764193] [mtk_nand] probe successfully!
[    2.769046] Signature matched and data read!
[    2.773293] load_fact_bbt success 1023
[    2.777691] libphy: Fixed MDIO Bus: probed
[    2.848976] libphy: mdio: probed
[    4.252654] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[    4.259343] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
[    4.270147] NET: Registered protocol family 10
[    4.275976] Segment Routing with IPv6
[    4.279792] NET: Registered protocol family 17
[    4.284271] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.297188] 8021q: 802.1Q VLAN Support v1.8
[    4.304363] UBI: auto-attach mtd9
[    4.307728] ubi0: attaching mtd9
[    4.566981] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
[    5.418406] ubi0: scanning is finished
[    5.438343] ubi0: attached mtd9 (name "ubi", size 117 MiB)
[    5.443821] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    5.450711] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    5.457490] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    5.464415] ubi0: good PEBs: 940, bad PEBs: 0, corrupted PEBs: 0
[    5.470413] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    5.477622] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1784382385
[    5.486733] ubi0: available PEBs: 0, total reserved PEBs: 940, PEBs reserved for bad PEB handling: 20
[    5.495944] ubi0: background thread "ubi_bgt0d" started, PID 393
[    5.497988] block ubiblock0_0: created from ubi0:0(rootfs)
[    5.498003] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    5.498024] hctosys: unable to open rtc device (rtc0)
[    5.498402] usb_vbus: disabling
[    5.529115] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    5.536798] Freeing unused kernel memory: 212K
[    5.541236] This architecture does not have kernel memory protection.
[    6.078086] init: Console is alive
[    6.081728] init: - watchdog -
[    6.597857] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    6.687477] usbcore: registered new interface driver usbfs
[    6.693032] usbcore: registered new interface driver hub
[    6.698523] usbcore: registered new device driver usb
[    6.713079] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
[    6.722073] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    6.727437] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[    6.746528] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
[    6.755015] xhci-mtk 1e1c0000.xhci: irq 19, io mem 0x1e1c0000
[    6.761822] hub 1-0:1.0: USB hub found
[    6.765649] hub 1-0:1.0: 2 ports detected
[    6.768204] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
[    6.776055] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    6.781400] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[    6.788889] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0  SuperSpeed
[    6.795493] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.804431] hub 2-0:1.0: USB hub found
[    6.808278] hub 2-0:1.0: 1 port detected
[    6.815186] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.836707] init: - preinit -
[    7.585842] mtk_soc_eth 1e100000.ethernet: PPE started
[    7.661226] random: procd: uninitialized urandom read (4 bytes read)
[   10.797221] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 487
[   10.871665] UBIFS (ubi0:1): recovery needed
[   11.060011] UBIFS (ubi0:1): recovery completed
[   11.064605] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   11.072423] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   11.082321] UBIFS (ubi0:1): FS size: 112373760 bytes (107 MiB, 885 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
[   11.092902] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[   11.099504] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID A4B934E8-BA84-4B25-81EB-59E2F9F66052, small LPT model
[   11.118119] mount_root: switching to ubifs overlay
[   11.149135] urandom-seed: Seeding with /etc/urandom.seed
[   11.241923] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[   11.256885] procd: - early -
[   11.259863] procd: - watchdog -
[   11.916529] procd: - watchdog -
[   11.919980] procd: - ubus -
[   11.995998] random: ubusd: uninitialized urandom read (4 bytes read)
[   12.008017] random: ubusd: uninitialized urandom read (4 bytes read)
[   12.014790] random: ubusd: uninitialized urandom read (4 bytes read)
[   12.022084] procd: - init -
[   12.377269] kmodloader: loading kernel modules from /etc/modules.d/*
[   12.387736] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   12.395726] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   12.406986] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[   12.450736] xt_time: kernel timezone is -0000
[   12.469714] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.504522] bus=0x1, slot = 0x0, irq=0xff
[   12.508826] mt7603e 0000:01:00.0: ASIC revision: 76030010
[   12.517576] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
[   12.523148] mt7603e 0000:01:00.0: Build Time: 20160107100755
[   12.566403] firmware init done
[   12.737316] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.744906] bus=0x2, slot = 0x1, irq=0xff
[   12.749208] mt76x2e 0000:02:00.0: ASIC revision: 76120044
[   12.777141] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
[   12.886775] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
[   12.892265] mt76x2e 0000:02:00.0: Build: 1
[   12.896406] mt76x2e 0000:02:00.0: Build Time: 201507311614____
[   12.916417] mt76x2e 0000:02:00.0: Firmware running!
[   12.922909] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   12.929866] kmodloader: done loading kernel modules from /etc/modules.d/*
[   13.578599] urandom_read: 5 callbacks suppressed
[   13.578614] random: jshn: uninitialized urandom read (4 bytes read)
[   18.396574] mtk_soc_eth 1e100000.ethernet: PPE started
[   18.407897] device eth0 entered promiscuous mode
[   18.414814] br-lan: port 1(eth0.1) entered blocking state
[   18.420300] br-lan: port 1(eth0.1) entered disabled state
[   18.426874] device eth0.1 entered promiscuous mode
[   18.436415] br-lan: port 1(eth0.1) entered blocking state
[   18.441835] br-lan: port 1(eth0.1) entered forwarding state
[   18.447972] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   18.469826] br-lan: port 2(eth0.2) entered blocking state
[   18.475262] br-lan: port 2(eth0.2) entered disabled state
[   18.481435] device eth0.2 entered promiscuous mode
[   18.486718] br-lan: port 2(eth0.2) entered blocking state
[   18.492173] br-lan: port 2(eth0.2) entered forwarding state
[   19.388952] random: crng init done
[   19.400056] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   20.215037] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.224019] br-lan: port 3(wlan0) entered blocking state
[   20.229395] br-lan: port 3(wlan0) entered disabled state
[   20.235114] device wlan0 entered promiscuous mode
[   20.240017] br-lan: port 3(wlan0) entered blocking state
[   20.245318] br-lan: port 3(wlan0) entered forwarding state
[   20.451077] br-lan: port 3(wlan0) entered disabled state
[   20.786187] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   20.793049] br-lan: port 3(wlan0) entered blocking state
[   20.798490] br-lan: port 3(wlan0) entered forwarding state
[   21.259926] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   21.270249] br-lan: port 4(wlan1) entered blocking state
[   21.275580] br-lan: port 4(wlan1) entered disabled state
[   21.281579] device wlan1 entered promiscuous mode
[   21.286660] br-lan: port 4(wlan1) entered blocking state
[   21.291999] br-lan: port 4(wlan1) entered forwarding state
[   21.416558] br-lan: port 4(wlan1) entered disabled state
[  101.519124] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  101.525916] br-lan: port 4(wlan1) entered blocking state
[  101.531221] br-lan: port 4(wlan1) entered forwarding state
[1380778.703917] ------------[ cut here ]------------
[1380778.708749] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:320 dev_watchdog+0x1ac/0x324
[1380778.717174] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
[1380778.724293] Modules linked in: nf_conntrack_ipv6 mt76x2e mt7603e mt76 mac80211 iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ip_tables cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT x_tables nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_log_common nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack compat ledtrig_usbport leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1380778.781588] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.71 #0
[1380778.787741] Stack : 00000000 8fe0b240 805a0000 8006f7e4 805d0000 805663c0 00000000 00000000
[1380778.796251]         80530e88 8fc09dc4 805a2dbc 805a2947 8052bfb8 00000001 8fc09d68 1cc282a7
[1380778.804756]         00000000 00000000 80600000 00006120 00000000 0000013a 00000008 00000000
[1380778.813259]         00000000 805a0000 000bed14 00000000 00000000 00000000 805d0000 80379fb8
[1380778.821763]         00000009 00000140 00000000 8fe0b240 00000001 8029cdf8 00000000 80600000
[1380778.830268]         ...
[1380778.832876] Call Trace:
[1380778.835506] [<80010670>] show_stack+0x58/0x100
[1380778.840122] [<8046c27c>] dump_stack+0x9c/0xe0
[1380778.844636] [<8002e408>] __warn+0xe0/0x114
[1380778.848886] [<8002e46c>] warn_slowpath_fmt+0x30/0x3c
[1380778.854002] [<80379fb8>] dev_watchdog+0x1ac/0x324
[1380778.858873] [<80086754>] call_timer_fn.isra.3+0x24/0x84
[1380778.864247] [<80086970>] run_timer_softirq+0x1bc/0x248
[1380778.869555] [<80489740>] __do_softirq+0x128/0x2ec
[1380778.874416] [<80032b34>] irq_exit+0xac/0xc8
[1380778.878774] [<8024b3fc>] plat_irq_dispatch+0xfc/0x138
[1380778.883976] [<8000b5e8>] except_vec_vi_end+0xb8/0xc4
[1380778.889089] [<8000cfb0>] r4k_wait_irqoff+0x1c/0x24
[1380778.894054] [<8006685c>] do_idle+0xe4/0x168
[1380778.898390] [<80066ad8>] cpu_startup_entry+0x24/0x2c
[1380778.903508] [<805cbbf8>] start_kernel+0x48c/0x4ac
[1380778.908470] ---[ end trace c8dd6f0a0de2551e ]---
[1380778.913251] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
[1380778.919606] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000065
[1380778.925787] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=0ea00000, max=0, ctx=515, dtx=515, fdx=514, next=515
[1380778.936459] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=0e190000, max=0, calc=2503, drx=2505
[1380778.950217] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[1380778.963338] mtk_soc_eth 1e100000.ethernet: PPE started

I hope this helps to find it. Otherwise just close it.

Greetings

21.03.20192196Base systemBug ReportVery LowMediumblock info confuses mount pointsAllWaiting on reporter Task Description

I’ve encountered a bug in /sbin/block.

If multiple block devices paths share the same prefix e.g. /dev/mmcblk0p1 and /dev/mmcblk0p10 the commands block info confuses them.
In my case /dev/mmcblk0p1 is a boot partition and /dev/mmcblk0p10 is a data partition.
There are a bunch of other partitions, which I’ll omit for the sake clarity in the following example.

/etc/config/fstab:

config 'global'
        option  anon_swap       '0'
        option  anon_mount      '0'
        option  auto_swap       '1'
        option  auto_mount      '1'
        option  delay_root      '5'
        option  check_fs        '0'

config 'mount'
        option  target  '/data'
        option  device  '/dev/mmcblk0p10'
        option  fstype  'ext4'
        option  enabled '1'

config 'mount'
        option  device  '/dev/mmcblk0p1'
        option  target  '/uboot'
        option  fstype  'vfat'
        option  options 'rw,sync'
        option  enabled '1'
...

After boot the output of mount looks like this:

root@foobar:~# mount
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
/dev/mmcblk0p10 on /data type ext4 (rw,relatime,data=ordered)
/dev/mmcblk0p1 on /uboot type vfat (rw,sync,relatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
...

At least everything is mounted in the right place.
If I do a block info I get:

root@foobar:~# block info
/dev/mmcblk0p1: UUID="0037-0032" LABEL="" VERSION="FAT16" MOUNT="/data" TYPE="vfat"
/dev/mmcblk0p10: UUID="d8dff841-edc4-4094-ae68-f6f0596c2277" VERSION="1.0" MOUNT="/data" TYPE="ext4"
...

Which is a little bit odd, as /dev/mmcblk0p1 is clearly not mounted under /data.

I did some digging in the sources and found the culprit in block.c:find_mount_point.
In line 646 in block.c:

*pos = '\0';
devname = tmp;
if (!strncmp(block, devname, len)) { // <- problem
	point = strdup(cpoint);
	break;
}

block is the parameter passed to find_mount_point, len is the string length of block and devname is a block device name read from /proc/self/mountinfo.
If the string in block is a prefix of the string in devname, !strncmp will always be true as, therefore the mount point in this line will be returned to caller.
In my case the line for /dev/mmcblk0p10 is encountered first, therefore /data is returned as mountpoint for both /dev/mmcblk0p10 and /dev/mmcblk0p1.

Since the idea here is to look for an exactly equal string I would suggest to compare the string length as well as calling strncmp.
See the attached patch for my temporary solution.

As a last remark: I could not determine if this affects other functionalities of /sbin/block as well,
but since find_mount_point is also called during umounting this might be more than just a display bug.

21.04.20192248PackagesFeature RequestVery LowLowuhttpd: implement ubus event listener via Server-Sent E...TrunkWaiting on reporter Task Description

Usecase:
As a web developer I would benefit from having the possibility to send events from the server to the browser so the browser can react to it dynamically.

The proposed implementation is the leanest possible.

A SSE (Server-Sent Event) is a simple protocol on top of basic http polling to send messages from the http server to the browser for the purpose of instant notifications.
It comes implemented in all major browsers, including mobile.

If paired with `ubus listen` or `ubus monitor`, a seamless integration with the ubus pipeline could be implemented.

We tried to implement it by adding an option in this line of code but got stuck in our lack of corutine mechanisms and how uhttpd works.

The difference with the call and list options is that this one should be long-lived and progressive, preventing the dreaded polling from the web (also, better us of resources, more elegant implementation, etc).

As an example, a very basic implementation of a SSE server in php:

<?php
header('Content-Type: text/event-stream');
header('Cache-Control: no-cache');

echo "data: \"hello world\"" . PHP_EOL;
echo PHP_EOL;
echo "data: \"goodbye world\"" . PHP_EOL;
echo PHP_EOL;
ob_flush();
flush();

An example of a very basic implementation of a SSE client in HTML:

<html>
	<body></body>
	<script>
	var source = new EventSource("demo_sse.php");
	source.onmessage = function(event) {
		document.getElementById("result").innerHTML += event.data + "<br>";
	}; 
	</script>
</html>
31.05.20192303Base systemBug ReportVery LowLowwpad-mesh crashes with encryption enabledTrunkWaiting on reporter Task Description

device is wdr3600

DISTRIB_ID=’OpenWrt’ DISTRIB_RELEASE=’18.06.2’ DISTRIB_REVISION=’r7676-cddd7b4c77’ DISTRIB_TARGET=’ar71xx/generic’ DISTRIB_ARCH=’mips_24kc’ DISTRIB_DESCRIPTION=’OpenWrt 18.06.2 r7676-cddd7b4c77’ DISTRIB_TAINTS=’’ r7676-cddd7b4c77

the rom is built with package builder:
PROFILE=tl-wdr3600-v1 PACKAGES=”luci luci-app-sqm conntrack kmod-usb2 kmod-usb-storage block-mount kmod-fs-ext4 e2fsprogs badblocks openssh-sftp-server luci-app-ddns libustream-openssl luci-app-openvpn openvpn-openssl -wpad-mini wpad-mesh-wolfssl”

my log is full of:
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.369096] ————[ cut here ]———— Fri May 31 10:15:26 2019 kern.warn kernel: [15298.373874] WARNING: CPU: 0 PID: 9955 at backports-2017-11-01/net/mac80211/wpa.c:431 0×87708734 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.385196] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_netlink nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY slhc nfnetlink nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat sch_cake nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.457266] sch_hfsc sch_ingress ledtrig_usbport ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ifb tun usb_storage ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc16 crc32c_generic crypto_hash
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.484154] CPU: 0 PID: 9955 Comm: kworker/u2:1 Tainted: G W 4.9.152 #0
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.492028] Workqueue: phy1 0x876ec0a0 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.498054] Stack : 00000123 863d3af8 877cade0 800a931c 00000000 00000000 00000000 00000000
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.506616] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.515169] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.523713] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.532259] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.540812] ...
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.543314] Call Trace:
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.545666] [<800a931c>] 0x800a931c
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.549209] [<8006ad4c>] 0x8006ad4c
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.552762] [<8006ad4c>] 0x8006ad4c
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.556319] [<8007fd84>] 0x8007fd84
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.559868] [<87708734>] 0×87708734 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.565911] [<8007fe20>] 0x8007fe20
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.569458] [<87708734>] 0×87708734 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.575519] [<876e8ef8>] 0x876e8ef8 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.581343] [<87727ee0>] 0x87727ee0 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.587439] [<8772ab3c>] 0x8772ab3c [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.593621] [<876e96e4>] 0x876e96e4 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.599368] [<87717930>] 0×87717930 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.605451] [<876e97a8>] 0x876e97a8 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.611215] [<80065ea0>] 0x80065ea0
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.614822] [<87717490>] 0×87717490 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.620903] [<876e9e1c>] 0x876e9e1c [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.626721] [<876ea320>] 0x876ea320 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.632529] [<876ea410>] 0x876ea410 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.638353] [<87729fcc>] 0x87729fcc [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.644409] [<87727250>] 0×87727250 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.650470] [<8772bcc4>] 0x8772bcc4 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.656499] [<8027eb6c>] 0x8027eb6c
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.660132] [<8772d630>] 0x8772d630 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.666162] [<802ad588>] 0x802ad588
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.669702] [<80450000>] 0×80450000 Fri May 31 10:15:26 2019 kern.warn kernel: [15298.673256] [<80082e74>] 0x80082e74
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.676808] [<8008274c>] 0x8008274c
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.680384] [<876ec15c>] 0x876ec15c [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.686137] [<80082940>] 0×80082940 Fri May 31 10:15:26 2019 kern.warn kernel: [15298.689697] [<876ec088>] 0x876ec088 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.695462] [<800829f8>] 0x800829f8
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.699010] [<87682e5c>] 0x87682e5c [ath9k_hw@87680000+0×51020]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.705047] [<876ec16c>] 0x876ec16c [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.710847] [<80092c70>] 0x80092c70
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.714427] [<800927f0>] 0x800927f0
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.718005] [<80093a7c>] 0x80093a7c
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.721542] [<80093788>] 0×80093788 Fri May 31 10:15:26 2019 kern.warn kernel: [15298.725094] [<80093788>] 0×80093788 Fri May 31 10:15:26 2019 kern.warn kernel: [15298.728651] [<80098220>] 0×80098220 Fri May 31 10:15:26 2019 kern.warn kernel: [15298.732204] [<80098144>] 0×80098144 Fri May 31 10:15:26 2019 kern.warn kernel: [15298.735759] [<80065ef8>] 0x80065ef8
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.739305]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.740822] —[ end trace 07a56879b3fe468f ]—

And wifi connectivity on radio0 is gone. There is another router on the mesh (WR740v4 with openwrt 18.06.2). I have tried with wpad-mesh-openssl but results were the same.

This mesh was configured about one week ago and was working fine for a few days, but since yesterday is show this behaviour. A reboot on this router does not solve the problem.

Configuration is as follows:
/etc/config/network:

config interface 'lan'
        option type 'bridge'
        option ifname 'eth0.1'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '10.10.0.1'

/etc/config/wireless:

config wifi-device 'radio0'
        option type 'mac80211'
        option hwmode '11g'
        option path 'platform/ar934x_wmac'
        option country 'BR'
        option legacy_rates '1'
        option txpower '17'
        option channel '9'
        option htmode 'HT40'
        option disabled 0

config wifi-iface 'default_radio0'
        option device 'radio0'
        option ifname 'wlan0'
        option network 'lan'
        option mode 'ap'
        option ssid 'AP'
        option wds '0'
        option encryption 'psk2/aes'
        option key 'password'
        option wpa_disable_eapol_key_retries '1'
        option disabled 0

config wifi-iface 'mesh0'
        option network 'lan'
        option ifname 'mesh0'
        option device 'radio0'
        option mode 'mesh'
        option mesh_id 'meshid'
        option encryption 'psk2/aes'
        option key 'password'
        option mesh_fwding '1'
        option disabled 0
11.06.20192316KernelBug ReportVery LowCriticalKernel's iptables crash unexpectedlyTrunkWaiting on reporter Task Description

<Xiaomi Mi Router 3G / OpenWrt SNAPSHOT, r10173-6b762dd>
My router sometimes restart unexpectedly with no reason. Here’s the kernel’s crash log (/sys/kernel/debug/crashlog)

<0>[12930.571103] usercopy: kernel memory overwrite attempt detected to c2651000 (kmalloc-2048) (5408 bytes)
<4>[12930.580437] Kernel bug detected[#1]:
<4>[12930.584007] CPU: 2 PID: 28709 Comm: iptables Not tainted 4.14.123 #0
<4>[12930.590333] task: 8186ddc0 task.stack: 81fe4000
<4>[12930.594840] $ 0   : 00000000 00000001 0000005a 00000000
<4>[12930.600054] $ 4   : 8122d33c 8122d33c 81231e78 00007388
<4>[12930.605266] $ 8   : 00000000 00000194 00000008 00000000
<4>[12930.610476] $12   : 00000000 805c0000 0008b6df 00000000
<4>[12930.615697] $16   : c2651000 00001520 00000000 c2652520
<4>[12930.620906] $20   : 006678e0 00001548 00000000 77fca000
<4>[12930.626115] $24   : 00000001 802ab558
<4>[12930.631326] $28   : 81fe4000 81fe5dc0 00000000 80116360
<4>[12930.636539] Hi    : 00000124
<4>[12930.639403] Lo    : 74e58000
<4>[12930.642286] epc   : 80116360 __check_object_size+0x1b0/0x1e0
<4>[12930.647921] ra    : 80116360 __check_object_size+0x1b0/0x1e0
<4>[12930.653549] Status: 11007c03      KERNEL EXL IE
<4>[12930.657721] Cause : 50800024 (ExcCode 09)
<4>[12930.661707] PrId  : 0001992f (MIPS 1004Kc)
<4>[12930.665796] Modules linked in: pppoe ppp_async pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp
<4>[12930.736837]  nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat fuse sch_cake nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter
<4>[12930.808159]  ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip_gre gre ifb ip_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 sha1_generic ecb usb_storage sd_mod scsi_mod ext4 mbcache jbd2 crc32c_generic leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
<4>[12930.835248] Process iptables (pid: 28709, threadinfo=81fe4000, task=8186ddc0, tls=77fd8eb8)
<4>[12930.843554] Stack : 818c0040 8055090c 8055e4c8 c2651000 8054f124 00001520 00000000 00001520
<4>[12930.851887]         c2651000 00667908 805d9980 8ead1c3c 818c0000 818c0040 c264e000 805b0000
<4>[12930.860223]         805b0000 805e0000 00000041 8f1b9c98 805d9980 c264e000 0066a000 81fe5e34
<4>[12930.868560]         8adcd004 006663b0 81840040 805d9980 00000000 00000000 746c6966 00007265
<4>[12930.876894]         00000000 00000000 00000000 00000000 00000000 00000000 00000152 00000000
<4>[12930.885244]         ...
<4>[12930.887733] Call Trace:
<4>[12930.890172] [<80116360>] __check_object_size+0x1b0/0x1e0
<4>[12930.895540] [<8ead1c3c>] xt_copy_counters_from_user+0xac/0x158 [x_tables]
<4>[12930.902322] [<8f1b9c98>] ipt_register_table+0x508/0xdf8 [ip_tables]
<4>[12930.908568] Code: 02003825  0c01d530  24840924 <000c000d> 8fb30028  8fb20024  8fb10020  8fb0001c  03e00008
<4>[12930.918296]
<4>[12930.920137] ---[ end trace 0d59c51a87e12512 ]---
12.11.20192593Base systemBug ReportVery LowHighno AC wifi with ath10k on 19.07-rc1openwrt-19.07Waiting on reporter Task Description

- Archer C7, Netgear R7800
- 19.07-RC1 default
- install image, configure wifi, try to connect, in my case i’m getting 300Mbps rate, others report as low as up to 54 (legacy only)

 

R7800 report: https://forum.openwrt.org/t/openwrt-19-07-0-first-release-candidate/48040/33

Archer C7 v2 report: https://forum.openwrt.org/t/openwrt-19-07-rc1-archer-c7-v2-5g-wifi-died-after-trying-to-change-channels/48182/7

the situation is the same with intree 4.9.200 driver or any of the latest backports installed on client PC

29.11.20192641KernelBug ReportVery LowMediumDevice file for USB does not appear /dev/ttyUSB*openwrt-19.07Waiting on reporter Task Description

With new version 19.07.0rc I could not make my USB cellular (3g) modem dongle to work due to it simply no any serial device like /dev/ttyUSB* file appear with insertion.
In kernel log it appears report about new device insertion and nothing happenings after.
I made several attempts, with ‘modeswitch’ or without and several other ‘mods’ the result is the same no any /dev/ttyUSB*
With other version it was not such problem it appeared exactly three /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 es well as on my Ubuntu 19.04 And Ubuntu 16.04 Ubuntu 18.04

Both router and dongle are USB-2
Actually router is Asus RT-N16
and modem dongle is Alcatel One Touch X090S

P.S. I need this one to be solved to report other bugs. :)

01.12.20192644Base systemBug ReportVery LowLowdnsmasq-full: Cannot satisfy dependenciesopenwrt-19.07Waiting on reporter Task Description

Environment:
arch: mips
model: TP-link WDR4300
Openwrt: 19.07.0-rc1

Description:
I probably overlooked but hit the following issue where unable to install dnsmasq-full. Actually downloading only already gives the following warning and wonder if I can/should force-install:

# opkg install dnsmasq-full --download-only
Downloading http://downloads.openwrt.org/releases/19.07.0-rc1/packages/mips_24kc/base/dnsmasq-full_2.80-14_mips_24kc.ipk
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for dnsmasq-full:
 * 	kernel (= 4.14.151-1-342af9e4f67b3447c53216ab8e3b12a1)
 * opkg_install_cmd: Cannot install package dnsmasq-full.
03.12.20192650Base systemBug ReportVery LowLowr7800 19.07-rc2 unable to change channel for ACopenwrt-19.07Waiting on reporter Task Description

- Device problem occurs on - Linux r7800 4.14.156 #0 SMP Sat Nov 30 15:52:33 2019 armv7l GNU/Linux
- Software versions of OpenWrt/LEDE release - 19.07-rc2

in Luci when change channel number change actually never gets committed, when do manually in /etc/config/wireless and then reboot router comes up with 5GHz network disabled, after changing back to default channel 36 5GHz network is usable again.

please provide steps to collect log

in dmesg only:

(wlan0) entered blocking state
(wlan0) entered disabled state
   
08.01.20202717Base systemBug ReportVery LowMediumYouku YK-L1C (MT7620A): WLAN stops working periodicallyTrunkWaiting on reporter Task Description

Device: Youku YK-L1C
PCB: MTO-WR976N V1.0
Chip: MT7620A ver:2 eco:6
CPU0 revision: 00019650 (MIPS 24KEc)
MIPS: YOUKU YK1

With several OpenWRT versions starting from 2018 (when I bought the router), WLAN periodically stops working after a week or after a month. Wired Ethernet ports remain working. WLAN restart does not help.

Kernel log suggests to file a bug report on rt2x00.serialmonkey.com but the site is not functioning.

The trail of the kernel log:

[ 34.827909] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[ 35.428393] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[ 35.458300] IPv6: ADDRCONF(NETDEV_UP): wlan0-2: link is not ready
[ 36.064758] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-2: link becomes ready
[ 36.097912] IPv6: ADDRCONF(NETDEV_UP): wlan0-3: link is not ready
[ 36.699145] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-3: link becomes ready
[ 49.518071] random: crng init done
[ 4837.370372] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[ 5834.538102] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[ 5834.556560] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[ 5834.574974] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[60224.028009] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[83621.461506] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[83993.491441] mtk_soc_eth 10100000.ethernet eth0: port 1 link up (100Mbps/Full duplex)
[84062.284581] device wlan0 left promiscuous mode
[84062.293643] br-lan: port 2(wlan0) entered disabled state
[84062.621840] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[84063.227188] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[84067.508458] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[84067.575677] br-lan: port 2(wlan0) entered blocking state
[84067.586360] br-lan: port 2(wlan0) entered disabled state
[84067.597335] device wlan0 entered promiscuous mode
[84074.967563] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[84074.980512] br-lan: port 2(wlan0) entered blocking state
[84074.991139] br-lan: port 2(wlan0) entered forwarding state
[84075.018713] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[84076.101273] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[84076.128677] IPv6: ADDRCONF(NETDEV_UP): wlan0-2: link is not ready
[84077.809446] IPv6: ADDRCONF(NETDEV_UP): wlan0-3: link is not ready
[84078.043454] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-2: link becomes ready
[84079.829418] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-3: link becomes ready
[84079.869727] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2
[84079.869727] Please file bug report to http://rt2x00.serialmonkey.com

18.01.20202748Base systemBug ReportVery LowMediumPrinter no more receiving IP address since 19.07.0openwrt-19.07Waiting on reporter Task Description

Dear community,
Previously I had OpenWRT 18.06.5 in use and my printer (HP LaserJet Pro 400 M475dw) was connecting fine over 2.4 GHz WiFi and obtained an IP address of defined DHCP static leases.
I went to 19.07.0 by starting from scratch on the same Netgear R7800 hardware. Everything works fine except for the mentioned printer.
It connects to WiFi and is shown in the list of associated stations, but it doesn’t receive an IP. The syslog prints following two lines about every minute:
Sat Jan 18 13:12:19 2020 daemon.info dnsmasq-dhcp[20788]: DHCPDISCOVER(wlan1) 34:23:87:xx:xx:xx
Sat Jan 18 13:12:19 2020 daemon.info dnsmasq-dhcp[20788]: DHCPOFFER(wlan1) 192.168.1.128 34:23:87:xx:xx:xx

What I’ve tried so far:
- enable/disable static leases: same behavior
- enable/disable KRACK countermeasures: same behavior
- require/optional/disable 802.11w Management Frame Protection: with require and even with optional the printer would not connect to WiFi at all
- factory reset printer and try again: no difference

Additional info:
- I have no WPA3 packets installed or activated - just default firmware image obtained from OpenWRT. Only additional packet is luci-ssl (+dependencies)
- all other devices that connect to 2.4 GHz or 5 GHz get their IP addresses. Those are mobile phones, laptops, tablets, TV’s, Chromecast, vacuum robot...
- As well no problem with physically connected devices like NAS, VoIP phone base, home automation system
- Printer display shows WiFi is connected but IP is set to 169.254.60.37
- It doesn’t look like a WiFi issue, more like something is different with the DHCP server between 18.06.5 and 19.07.0

04.04.20202962Base systemBug ReportVery LowVery LowGlobal section not createdTrunkWaiting on reporter Task Description

If I build on masters by disabling IPv6 support, the Globals section in “network” config file is not created.

- The problem occurs on Linksys WRT3200ACM (Rango), but I suppose it is independent of the hardware.
- I am currently building on master and this is where I noticed the problem.
- Download the code, update and install the packages, access menuconfig. Disable IPv6 support. Save the configuration, build and flash the

 firmware on the device. Check the file /etc/config/network.

Although the Globals section contains ula_prefix, it also contains packet_steering, which is not related to IPv6 support.
The workaround is to manually create the Globals section and add the option for packet_steering.

24.08.20203301PackagesBug ReportVery LowLowCannot satisfy dependency on iptables-mod-tproxyopenwrt-19.07Waiting on reporter Task Description

One example is iptables-mod-tproxy. It is available in 19.07.0, but not in 19.07.1. This causes dependency issue when installing some packages.
How to reproduce:

# opkg install shadowsocks-libev-ss-rules
Installing shadowsocks-libev-ss-rules (3.2.5-5) to root...
Downloading http://downloads.openwrt.org/releases/19.07.1/packages/aarch64_cortex-a53/packages/shadowsocks-libev-ss-rules_3.2.5-5_aarch64_cortex-a53.ipk
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for shadowsocks-libev-ss-rules:
 *      iptables-mod-tproxy
 * opkg_install_cmd: Cannot install package shadowsocks-libev-ss-rules.

I reproduced it on aarch64_coretex_a53, but I see it’s missing for other platforms like a72 and x86_64, too.

It was reported here: https://github.com/openwrt/packages/issues/11457 But was closed and the maintainer said it belongs here.

14.10.2016227Base systemBug ReportMediumHighVLAN support mismatch between preinit and default netwo...TrunkResearching Task Description

PPPoE is broken on WRT1900ACS

Upgraded from Lede r578 to latest Lede r1814 and PPPOE doesn’t work anymore altough the pppd version and PPPoE version are the same:
- Linksys WRT1900ACS
- LEDE reboot r1814

pppd debug log:

Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Timeout waiting for PADO packets
Unable to complete PPPoE Discovery
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]

While on the same hardware running LEDE r578, the PPPoE module works as expected:

Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Recv PPPOE Discovery V1T1 PADO session 0×0 length 40
dst c2:56:27:ca:d7:d4 src a0:f3:e4:34:d8:21
[service-name] [AC-name acc-aln1.hac] [AC-cookie 75 58 37 a5 ba 3c e4 a5 2a 61 bb 23 92 5c 1b dc]
Send PPPOE Discovery V1T1 PADR session 0×0 length 24
dst a0:f3:e4:34:d8:21 src c2:56:27:ca:d7:d4
[service-name] [AC-cookie 75 58 37 a5 ba 3c e4 a5 2a 61 bb 23 92 5c 1b dc]
Recv PPPOE Discovery V1T1 PADS session 0x30b length 4
dst c2:56:27:ca:d7:d4 src a0:f3:e4:34:d8:21
[service-name]
PADS: Service-Name: ‘’ PPP session is 779
Connected to a0:f3:e4:34:d8:21 via interface eth0
using channel 2
Using interface pppoe-wan
Connect: pppoe-wan ←→ eth0
sent [LCP ConfReq id=0×1 <mru 1492> <magic 0xc6952556>]
rcvd [LCP ConfReq id=0×66 <mru 1492> <auth chap MD5> <magic 0x4cc73648>]
sent [LCP ConfAck id=0×66 <mru 1492> <auth chap MD5> <magic 0x4cc73648>]
rcvd [LCP ConfAck id=0×1 <mru 1492> <magic 0xc6952556>]
sent [LCP EchoReq id=0×0 magic=0xc6952556]
rcvd [CHAP Challenge id=0×1 <7131a44524d1de8f1cd1061cac6d8c071d8bfe7351bc4ea7bd08f56684428475f229ba177a192696ebab32>, name = “acc-aln1.hac”]
sent [CHAP Response id=0×1 <4bb1a418b298790b128ad4d7ef3109ad>, name = “bthomehub@btbroadband.com”]
rcvd [LCP EchoRep id=0×0 magic=0x4cc73648]
rcvd [CHAP Success id=0×1 “CHAP authentication success”]
CHAP authentication succeeded: CHAP authentication success
CHAP authentication succeeded
peer from calling number A0:F3:E4:34:D8:21 authorized
sent [IPCP ConfReq id=0×1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
sent [IPV6CP ConfReq id=0×1 <addr fe80::c595:37d1:3987:1929>]
rcvd [IPV6CP ConfReq id=0x7b <addr fe80::0221:05ff:feb4:8824>]
sent [IPV6CP ConfAck id=0x7b <addr fe80::0221:05ff:feb4:8824>]
rcvd [IPCP ConfReq id=0×38 <addr 172.16.12.12>]
sent [IPCP ConfAck id=0×38 <addr 172.16.12.12>]
rcvd [IPCP ConfNak id=0×1 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
sent [IPCP ConfReq id=0×2 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
rcvd [IPV6CP ConfAck id=0×1 <addr fe80::c595:37d1:3987:1929>]
local LL address fe80::c595:37d1:3987:1929
remote LL address fe80::0221:05ff:feb4:8824
Script /lib/netifd/ppp-up started (pid 2646)
rcvd [IPCP ConfAck id=0×2 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
local IP address 81.146.2.155
remote IP address 172.16.12.12
primary DNS address 81.139.57.100
secondary DNS address 81.139.56.100
ppp.log
secondary DNS address 81.139.56.100
Script /lib/netifd/ppp-up started (pid 2653)
Script /lib/netifd/ppp-up finished (pid 2646), status = 0×9 Script /lib/netifd/ppp-up finished (pid 2653), status = 0×9

22.06.201626FlysprayFeature RequestVery LowLowComment formatting syntax should be documentedTrunkResearching Task Description

Currently the formatting options are not documented anywhere, and I failed to find any documentation with google. There are a few buttons to use, but they seem to be rather limited (e.g. nothing for quotations).

17.04.2017713Base systemBug ReportVery LowLownetifd: substantially more IFUP events are being create...TrunkResearching Task Description

I have noticed that some services reloaded with a procd “interface.*” raw trigger are reloading on a much more frequent cadence (few minutes or so). LEDE 17.01 does not do this. LEDE Trunk does. I can not find an obvious cause in procd. Though procd should not stop-start for reload without a command line change or explicit file under watch. Perhaps netifd commit a03216660797173fbe67866f75564e3fec9c1e8d is generating unusual numbers of IFUP.

procd_add_raw_trigger “interface.*” 2000 /etc/init.d/[script] reload

29.09.20171024PackagesFeature RequestVery LowLowThere is no "LEDE interface" for the Linux interface cr...AllResearching Task Description

Let’s say I want to enable dropbear only in the tun0 interface created by OpenVPN. The dropbear configuration has an “Interface” field where I can make it listen, for example, only on the “wan” or “lan” interfaces. But the tun0 interface has not been created by anything in /etc/config/network and LEDE doesn’t really know about it, so I can’t specify it the dropbear configuration.

Even adding the tun0 interface to a “vpn” network in /etc/config/network using “proto none” fails to do the trick.

18.11.20192614KernelBug ReportVery LowHighath10k 5 GHz connectivity issues for some client device...openwrt-19.07Researching Task Description

* - Device problem occurs on TP-Link Archer C2600.

* - Software version of OpenWrt 19.07-rc1 and older 19.07.

* - From the first version, which I tested after the release of 19.07, I have a problem with 5GHz radio / Wi-Fi. On two devices: LG OLED B8 55 “OTT and Cyfrowy Polsat STB OTT does not work internet. Both devices connect to the network, but do not have access to the Internet. In the connection diagnostics on the TV, the message pops up that it is a DNS error. On 2.4 GHz Wi-Fi everything is fine.

* - I have reverted to the 18.06 to fix the problem for now.


13.12.20192673Base systemBug ReportVery LowLowrsn_preauth_interface should be configurableTrunkResearching Task Description

OpenWrt currently automatically uses the client-facing interface ($network_bridge) as rsn_preauth_interface.

https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=package/network/services/hostapd/files/hostapd.sh;h=4bf6a6c9712785f40d059445f80f19d4f2992f4b;hb=HEAD#l554

It would be preferable to be able to configure this manually, since this is the interface where 802.11i preauthentication frames are transmitted over. This should not be mixed with the actual client network.

The hostapd configuration says the following:

# Space separated list of interfaces from which pre-authentication frames are
# accepted (e.g., 'eth0' or 'eth0 wlan0wds0'. This list should include all
# interface that are used for connections to other APs. This could include
# wired interfaces and WDS links. The normal wireless data interface towards
# associated stations (e.g., wlan0) should not be added, since
# pre-authentication is only used with APs other than the currently associated
# one.
#rsn_preauth_interfaces=eth0
08.04.2017692Base systemBug ReportMediumMediumWLAN AP not working on RasPi (bcm2710 target)TrunkAssigned Task Description

When flashing the brcm2708 / bcm2710 target the WiFi interface gets stuck in “client mode” and the AP will not be able to be brought up.

Some screenshots and a load of discussion here:
https://forum.lede-project.org/t/ap-mode-radio0-in-raspi-3-always-acts-as-a-client-shows-as-wlan0-in-luci/2885

Two more days of tinkering, wifi-up’ing and -down’ing did not bring me further.
I flashed another Pi3 (to exclude a hardware defect) with the same result.

I tried latest snapshot and stable images.
I am happy to help debug – tell me what you need me to do.

Greetings,
–Thomas

14.05.20192283Base systemBug ReportMediumLowm76: crash when creating an additional monitor interfac...TrunkAssigned Task Description

OpenWrt: b65a270c851ee422f26a0af10c879ebb87cb8f76
mt76: 4.14.108+2019-03-27-a11b6734-1

While debugging an unicast wifi bug, I tried to create a mon0 interface
iw wlan0 interface add mon0 type monitor.

Modules:	mt7603e@830f0000+87a0	mt76@83128000+6060	mac80211@83080000+6a240	iptable_raw@83111000+2e0	iptable_nat@831c5000+340	iptable_mangle@83bd7000+400	iptable_filter@83135000+360	ipt_REJECT@831c3000+3a0	ipt_MASQUERADE@8311f000+280	ipt_ECN@83bca000+560	ip_tables@831c0000+2650	cfg80211@83000000+35fb0	xt_time@83bbd000+6c0	xt_tcpudp@83baa000+6e0	xt_tcpmss@831ac000+400	xt_statistic@8311d000+320	xt_state@83151000+2a0xt_recent@831ae000+1bf0	xt_nat@83bd0000+5e0	xt_multiport@83bd6000+4e0	xt_mark@83134000+280	xt_mac@83bd3000+240	xt_limit@8315f000+480	xt_length@83125000+2a0	xt_hl@83132000+300	xt_helper@83126000+340	xt_ecn@83127000+520	xt_dscp@8313c000+3c0	xt_conntrack@83ba8000+8e0	xt_connmark@8311c000+420	xt_connlimit@83136000+1110	xt_connbytes@83bcd000+620	xt_comment@83117000+1c0	xt_TCPMSS@83bd2000+800	xt_REDIRECT@83bce000+2a0	xt_LOG@83bcc000+280	xt_HL@83bc9000+520	xt_FLOWOFFLOAD@83bc7000+ab0	xt_DSCP@8313b000+5c0	xt_CT@8313d000+9e0	xt_CLASSIFY@83131000+220	x_tables@83bc0000+30f0	nf_reject_ipv4@83130000+780	nf_nat_redirect@8311e000+560	nf_nat_masquerade_ipv4@83bac000+590	nf_conntrack_ipv4@83bb8000+1100	nf_nat_ipv4@83bba000+c70	nf_nat@83120000+2250	nf_log_ipv4@83bad000+dc0	nf_log_common@83116000+980	nf_flow_table_hw@83bbe000+820	nf_flow_table@83ba4000+3310	nf_defrag_ipv4@83153000+3e0	nf_conntrack_rtcache@83112000+8a0	compat@83118000+1700	act_connmark@83113000+850	nf_conntrack@83100000+d2c0	sch_tbf@8314e000+1680	sch_ingress@8314a000+4a0	sch_htb@83ba0000+36d0	sch_hfsc@83158000+39e0	em_u32@831ba000+200	cls_u32@83154000+2330	cls_tcindex@8314c000+15c0	cls_route@831be000+1540	cls_matchall@831a3000+a20	cls_fw@83144000+1000	cls_flow@83148000+1780	cls_basic@831bb000+d00	act_skbedit@831b4000+9f0	act_mirred@831b5000+e50	ifb@831a0000+be0	l2tp_ip@8316e000+1410	l2tp_eth@831a4000+a00	l2tp_netlink@831a6000+1f90	l2tp_core@831a8000+3110	udp_tunnel@83b99000+920	leds_gpio@83b4f000+b20	gpio_button_hotplug@83b50000+1900
<6>[    0.191477] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.197077] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.203431] NET: Registered protocol family 1
<7>[    0.207612] PCI: CLS 0 bytes, default 32
<4>[    0.210849] Crashlog allocated RAM at address 0x3f00000
<6>[    0.217463] workingset: timestamp_bits=30 max_order=14 bucket_order=0
<6>[    0.229138] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.234765] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<6>[    0.254072] io scheduler noop registered
<6>[    0.257804] io scheduler deadline registered (default)
<6>[    0.263580] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
<6>[    0.270756] console [ttyS0] disabled
<6>[    0.274257] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
<6>[    0.282984] console [ttyS0] enabled
<6>[    0.289970] bootconsole [early0] disabled
<3>[    0.298544] cacheinfo: Failed to find cpu0 device node
<4>[    0.303799] cacheinfo: Unable to detect cache hierarchy for CPU 0
<6>[    0.310628] spi-mt7621 10000b00.spi: sys_freq: 193333333
<6>[    0.329261] m25p80 spi0.0: s25fl064k (8192 Kbytes)
<5>[    0.334207] 4 fixed-partitions partitions found on MTD device spi0.0
<5>[    0.340643] Creating 4 MTD partitions on "spi0.0":
<5>[    0.345526] 0x000000000000-0x000000020000 : "boot"
<5>[    0.351255] 0x000000020000-0x0000007c0000 : "firmware"
<5>[    0.359405] 2 tplink-fw partitions found on MTD device firmware
<5>[    0.365482] Creating 2 MTD partitions on "firmware":
<5>[    0.370527] 0x000000000000-0x00000014f3a3 : "kernel"
<5>[    0.376451] 0x00000014f3a4-0x0000007a0000 : "rootfs"
<5>[    0.382277] mtd: device 3 (rootfs) set to be root filesystem
<5>[    0.389534] 1 squashfs-split partitions found on MTD device rootfs
<5>[    0.395888] 0x000000390000-0x0000007a0000 : "rootfs_data"
<5>[    0.402220] 0x0000007c0000-0x0000007d0000 : "config"
<5>[    0.408051] 0x0000007d0000-0x000000800000 : "factory"
<6>[    0.414688] libphy: Fixed MDIO Bus: probed
<6>[    0.431000] rt3050-esw 10110000.esw: link changed 0x00
<6>[    0.437801] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
<6>[    0.447188] NET: Registered protocol family 17
<6>[    0.451831] 8021q: 802.1Q VLAN Support v1.8
<6>[    0.468953] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
<6>[    0.476929] Freeing unused kernel memory: 136K
<4>[    0.481474] This architecture does not have kernel memory protection.
<14>[    1.719920] init: Console is alive
<14>[    1.723707] init: - watchdog -
<5>[    2.267376] random: fast init done
<14>[    3.000227] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<14>[    3.073195] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[    3.091032] init: - preinit -
<6>[    4.256850] rt3050-esw 10110000.esw: link changed 0x00
<5>[    4.687762] random: procd: uninitialized urandom read (4 bytes read)
<13>[    4.780523] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
<12>[    4.822673] urandom-seed: Seed file not found (/etc/urandom.seed)
<14>[    4.918017] procd: - early -
<14>[    4.921055] procd: - watchdog -
<14>[    5.550307] procd: - watchdog -
<14>[    5.553880] procd: - ubus -
<5>[    5.600493] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[    5.667639] random: ubusd: uninitialized urandom read (4 bytes read)
<14>[    5.675598] procd: - init -
<14>[    6.002174] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[    6.011883] l2tp_core: L2TP core driver, V2.0
<6>[    6.017941] l2tp_netlink: L2TP netlink interface
<6>[    6.024375] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
<6>[    6.032295] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
<6>[    6.044769] Mirror/redirect action on
<6>[    6.141161] u32 classifier
<6>[    6.143986]     input device check on
<6>[    6.147693]     Actions configured
<6>[    6.239795] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
<6>[    6.260517] Loading modules backported from Linux version v4.19.23-0-g67d52fae61c1
<6>[    6.268272] Backport generated by backports.git v4.19.23-1-0-g480a925a
<6>[    6.488990] xt_time: kernel timezone is -0000
<6>[    6.514755] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    6.566528] mt76_wmac 10300000.wmac: ASIC revision: 76280001
<6>[    7.593554] mt76_wmac 10300000.wmac: Firmware Version: 20151201
<6>[    7.599575] mt76_wmac 10300000.wmac: Build Time: 20151201183641
<6>[    7.621350] mt76_wmac 10300000.wmac: firmware init done
<6>[    7.728549] rt3050-esw 10110000.esw: link changed 0x01
<7>[    7.792147] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<14>[    7.802137] kmodloader: done loading kernel modules from /etc/modules.d/*
<4>[    9.177342] urandom_read: 6 callbacks suppressed
<5>[    9.177353] random: jshn: uninitialized urandom read (4 bytes read)
<6>[   11.971477] rt3050-esw 10110000.esw: link changed 0x00
<6>[   15.521829] rt3050-esw 10110000.esw: link changed 0x01
<6>[   40.298153] rt3050-esw 10110000.esw: link changed 0x00
<6>[   43.783225] rt3050-esw 10110000.esw: link changed 0x01
<6>[   44.432507] device eth0 entered promiscuous mode
<6>[   50.910274] br-lan: port 1(eth0.1) entered blocking state
<6>[   50.915855] br-lan: port 1(eth0.1) entered disabled state
<6>[   50.921660] device eth0.1 entered promiscuous mode
<6>[   50.939619] br-lan: port 1(eth0.1) entered blocking state
<6>[   50.945176] br-lan: port 1(eth0.1) entered forwarding state
<6>[   51.073380] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.080911] device eth0.1 left promiscuous mode
<6>[   51.085686] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.170750] br-lan: port 1(eth0.1) entered blocking state
<6>[   51.176313] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.182108] device eth0.1 entered promiscuous mode
<6>[   51.234695] br-lan: port 1(eth0.1) entered blocking state
<6>[   51.240185] br-lan: port 1(eth0.1) entered forwarding state
<6>[   54.284409] br-lan: port 2(wlan0) entered blocking state
<6>[   54.290155] br-lan: port 2(wlan0) entered disabled state
<6>[   54.295937] device wlan0 entered promiscuous mode
<6>[   55.227079] br-lan: port 2(wlan0) entered blocking state
<6>[   55.232548] br-lan: port 2(wlan0) entered forwarding state
<6>[   65.499313] device wlan0 left promiscuous mode
<6>[   65.504001] br-lan: port 2(wlan0) entered disabled state
<6>[   67.659749] br-lan: port 2(wlan0) entered blocking state
<6>[   67.665252] br-lan: port 2(wlan0) entered disabled state
<6>[   67.670929] device wlan0 entered promiscuous mode
<6>[   67.675848] br-lan: port 2(wlan0) entered blocking state
<6>[   67.681236] br-lan: port 2(wlan0) entered forwarding state
<6>[   67.687263] br-lan: port 2(wlan0) entered disabled state
<6>[   70.171904] br-lan: port 2(wlan0) entered blocking state
<6>[   70.177326] br-lan: port 2(wlan0) entered forwarding state
<4>[   74.063128] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
<4>[   74.076565] jffs2_build_filesystem(): unlocking the mtd device... 
<4>[   74.076626] done.
<4>[   74.084920] jffs2_build_filesystem(): erasing all blocks after the end marker... 
<5>[   75.341427] random: crng init done
<4>[   89.806667] done.
<5>[   89.808667] jffs2: notice: (2808) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
<4>[   90.097054] overlayfs: upper fs does not support tmpfile.
<6>[95491.758861] device wlan0 left promiscuous mode
<6>[95491.763556] br-lan: port 2(wlan0) entered disabled state
<6>[95496.123525] br-lan: port 2(wlan0) entered blocking state
<6>[95496.128998] br-lan: port 2(wlan0) entered disabled state
<6>[95496.134779] device wlan0 entered promiscuous mode
<6>[95496.139678] br-lan: port 2(wlan0) entered blocking state
<6>[95496.145064] br-lan: port 2(wlan0) entered forwarding state
<6>[95496.151480] br-lan: port 2(wlan0) entered disabled state
<6>[95497.434477] br-lan: port 2(wlan0) entered blocking state
<6>[95497.439926] br-lan: port 2(wlan0) entered forwarding state
<6>[181891.461089] device wlan0 left promiscuous mode
<6>[181891.465866] br-lan: port 2(wlan0) entered disabled state
<6>[181895.862824] br-lan: port 2(wlan0) entered blocking state
<6>[181895.868387] br-lan: port 2(wlan0) entered disabled state
<6>[181895.874262] device wlan0 entered promiscuous mode
<6>[181897.223872] br-lan: port 2(wlan0) entered blocking state
<6>[181897.229417] br-lan: port 2(wlan0) entered forwarding state
<6>[268291.119138] device wlan0 left promiscuous mode
<6>[268291.123910] br-lan: port 2(wlan0) entered disabled state
<6>[268296.605568] br-lan: port 2(wlan0) entered blocking state
<6>[268296.611162] br-lan: port 2(wlan0) entered disabled state
<6>[268296.616932] device wlan0 entered promiscuous mode
<6>[268298.034899] br-lan: port 2(wlan0) entered blocking state
<6>[268298.040440] br-lan: port 2(wlan0) entered forwarding state
<6>[354690.783285] device wlan0 left promiscuous mode
<6>[354690.788153] br-lan: port 2(wlan0) entered disabled state
<6>[354695.110340] br-lan: port 2(wlan0) entered blocking state
<6>[354695.115924] br-lan: port 2(wlan0) entered disabled state
<6>[354695.121790] device wlan0 entered promiscuous mode
<6>[354696.496658] br-lan: port 2(wlan0) entered blocking state
<6>[354696.502208] br-lan: port 2(wlan0) entered forwarding state
<6>[441090.473174] device wlan0 left promiscuous mode
<6>[441090.478041] br-lan: port 2(wlan0) entered disabled state
<6>[441094.831626] br-lan: port 2(wlan0) entered blocking state
<6>[441094.837188] br-lan: port 2(wlan0) entered disabled state
<6>[441094.843056] device wlan0 entered promiscuous mode
<6>[441094.848063] br-lan: port 2(wlan0) entered blocking state
<6>[441094.853538] br-lan: port 2(wlan0) entered forwarding state
<6>[441094.860044] br-lan: port 2(wlan0) entered disabled state
<6>[441096.143580] br-lan: port 2(wlan0) entered blocking state
<6>[441096.149126] br-lan: port 2(wlan0) entered forwarding state
<6>[527490.172730] device wlan0 left promiscuous mode
<6>[527490.177478] br-lan: port 2(wlan0) entered disabled state
<6>[527494.541946] br-lan: port 2(wlan0) entered blocking state
<6>[527494.547517] br-lan: port 2(wlan0) entered disabled state
<6>[527494.553391] device wlan0 entered promiscuous mode
<6>[527495.938895] br-lan: port 2(wlan0) entered blocking state
<6>[527495.944394] br-lan: port 2(wlan0) entered forwarding state
<1>[592589.839671] CPU 0 Unable to handle kernel paging request at virtual address 000002c8, epc == 830af554, ra == 83082384
<4>[592589.850591] Oops[#1]:
<4>[592589.852986] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.108 #0
<4>[592589.859074] task: 803cb430 task.stack: 803c6000
<4>[592589.863748] $ 0   : 00000000 80410000 00000000 00000000
<4>[592589.869140] $ 4   : 00000000 838cbd80 00000000 00000000
<4>[592589.874531] $ 8   : 838cb1c8 82f18516 00000010 43420000
<4>[592589.879922] $12   : 087f0000 00000000 000a9a0e 00000004
<4>[592589.885312] $16   : 838cbd80 00000000 830ecbc0 830ecbc0
<4>[592589.890703] $20   : 83b61bf0 830f73ac 00000001 00000000
<4>[592589.896093] $24   : 00000010 801bcbe0                  
<4>[592589.901484] $28   : 803c6000 83807e18 830ede88 83082384
<4>[592589.906876] Hi    : 005a1ac2
<4>[592589.909878] Lo    : ef14c145
<4>[592589.912889] epc   : 830af554 0x830af554 [mac80211@83080000+0x6a240]
<4>[592589.919330] ra    : 83082384 0x83082384 [mac80211@83080000+0x6a240]
<4>[592589.925764] Status: 1100e403	KERNEL EXL IE 
<4>[592589.930096] Cause : 00800008 (ExcCode 02)
<4>[592589.934243] BadVA : 000002c8
<4>[592589.937246] PrId  : 00019655 (MIPS 24KEc)
<4>[592589.941392] Modules linked in: mt7603e mt76 mac80211 iptable_raw iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY x_tables nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_log_common nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache compat act_connmark nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ifb
<4>[592590.013247]  l2tp_ip l2tp_eth l2tp_netlink l2tp_core udp_tunnel leds_gpio gpio_button_hotplug
<4>[592590.021995] Process swapper (pid: 0, threadinfo=803c6000, task=803cb430, tls=00000000)
<4>[592590.030101] Stack : 83807e7c 0000008a 00000000 838cbd80 838cbd80 83082384 00000050 830ecbc0
<4>[592590.038670]         83b61bf0 830f73ac 830ed4e0 00000000 838cb180 00000000 00000000 830ecbc0
<4>[592590.047239]         83b61bf0 830f73ac 830ed4e0 00000001 830ecbc0 830adb78 00000cfc 0000033f
<4>[592590.055808]         8381b800 00000080 00000000 00000000 00060036 00000000 830ed4e0 83b61bf0
<4>[592590.064376]         00000004 00000003 00000006 830f73f0 83807ee0 80058f30 803dfc40 00000003
<4>[592590.072945]         ...
<4>[592590.075510] Call Trace:
<4>[592590.075556] [<83082384>] 0x83082384 [mac80211@83080000+0x6a240]
<4>[592590.084214] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.090146] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.096068] [<830adb78>] 0x830adb78 [mac80211@83080000+0x6a240]
<4>[592590.102173] [<830f73f0>] 0x830f73f0 [mt7603e@830f0000+0x87a0]
<4>[592590.108088] [<80058f30>] 0x80058f30
<4>[592590.111724] [<830b4d80>] 0x830b4d80 [mac80211@83080000+0x6a240]
<4>[592590.117809] [<80009e70>] 0x80009e70
<4>[592590.121449] [<830f7548>] 0x830f7548 [mt7603e@830f0000+0x87a0]
<4>[592590.127377] [<8002d078>] 0x8002d078
<4>[592590.130998] [<80009e70>] 0x80009e70
<4>[592590.134619] [<80351a20>] 0x80351a20
<4>[592590.138240] [<8005d978>] 0x8005d978
<4>[592590.141866] [<80058f30>] 0x80058f30
<4>[592590.145491] [<80009e70>] 0x80009e70
<4>[592590.149109] 
<4>[592590.150701] Code: 27bdffe8  afbf0014  afb00010 <8c9002c8> 8caa00a4  1080001e  8e090438  8e030044  0123402a 
<4>[592590.160690] 
<4>[592590.162335] ---[ end trace 25bbd90279e222f9 ]---

===================================
13.10.2016224Base systemBug ReportVery LowLowwrong source IP when logging to remote IPv6 syslog serv...TrunkAssigned Task Description

Hello,

I’m trying to send log to remote IPv6 syslog server (x:y:z:12::1), but packets received by syslog server are invalid. Instead of public IPv6 address, syslog udp packets are sent with ::1 source IP and therefore ignored by destination server. Logging over IPv4 works ok.

tcpdump log from destination syslog server:
23:34:16.988433 IP6 ::1.38044 > x:y:z:12::1.514: SYSLOG daemon.notice, length: 65

Configuration:

/etc/config/system:

 option log_ip 'x:y:z:12::1'

Device is in the same range as syslog server (x:y:z:12::119/64) and has native IPv6 connectivity. Other services (dropbear, ntp client, snmpd, luci) are running fine over IPv6.

Device is TP-Link WDR3600, running lede reboot-1818-gb81fc29.

12.02.2017503KernelBuild FailureVery LowMediumBuild fails with CONFIG_KERNEL_GIT_CLONE_URI beig setAllAssigned Task Description

When specifying

CONFIG_KERNEL_GIT_CLONE_URI

a clean build fails, as the system assumes a already downloaded/cloned/packed linux-source is present in dl/ which on a freshly checked out openwrt/lede source isn’t the case yet, when

toolchain/kernel-headers

is about to be built.

The build error looks like:

make[3]: Entering directory `/build/lede.git/toolchain/kernel-headers'
zcat /build/lede.git/dl/linux-4.4.42.tar.gz | tar -C /build/lede.git/build_dir/toolchain-arm_cortex-a9+neon_gcc-6.3.0_glibc-2.24_eabi -xf -
gzip: /build/lede.git/dl/linux-4.4.42.tar.gz: No such file or directory
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors

The issue apparently is located in

include/kernel-defaults.mk

, line 53ff::

  ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"")
    define Kernel/Prepare/Default
        zcat $(DL_DIR)/$(LINUX_SOURCE) | $(TAR) -C $(KERNEL_BUILD_DIR) $(TAR_OPTIONS)
        $(Kernel/Patch)
        $(if $(QUILT),touch $(LINUX_DIR)/.quilt_used)
    endef
  else
    define Kernel/Prepare/Default
        zcat $(DL_DIR)/$(LINUX_SOURCE) | $(TAR) -C $(KERNEL_BUILD_DIR) $(TAR_OPTIONS)
    endef
  endif

For the package

kernel-headers

it just tries to access the not-yet downloaded/cloned/packed linux kernel source archive.

18.06.2017853Base systemBug ReportVery LowLowChange dnsmasq domain and local options to listsTrunkAssigned Task Description

On LEDE 17.01 ‘domain’ and ‘local’ options in dnsmasq configuration doesn’t correctly support lists values as per dnsmasq capabilities.

Steps to reproduce

#/etc/config/dhcp
[...]
config dnsmasq
        list domain 'example1.com,192.168.0.0/24'
        list domain 'example2.com,192.168.1.0/24'
        list local '/example1.com/'
        list local '/example2.com/'
[...]

$ uci commit dhcp
$ /etc/init.d/dnsmasq restart

Actual results

#/var/etc/dnsmasq.conf.cfg02411c
[...]
domain=example1.com,192.168.0.0/24 example2.com,192.168.1.0/24
local=/example1.com/ /example2.com/
[...]

Expected results

#/var/etc/dnsmasq.conf.cfg02411c
[...]
domain=example1.com,192.168.0.0/24
domain=example2.com,192.168.1.0/24
local=/example1.com/
local=/example2.com/
[...]

Workaround

Replace append_parm with config_list_foreach here resolve the issue.
I’m attaching a patch for the 17.01 dnsmasq init script but it will break old uci configuration that use ‘option’ instead of ‘list’.
Do you have any suggestion on how to migrate old configuration and set those parameters as lists in uci web interface?

25.07.2017931Base systemBug ReportVery LowHighOnboard Bluetooth not working on Raspberry Pi 3 BAllAssigned Task Description

I have tried LEDE 17.01.1 and 17.01.2 and i can’t get bluetooth running on raspberry pi 3.

It will not flash the firmware for the bluetooth controller on rpi3, when device is brought up:

root@LEDE:~# /usr/bin/hciattach /dev/ttyAMA0 bcm43xx 921600 noflow -
bcm43xx_init
Patch not found for BCM43430A1, continue anyway
Set Controller UART speed to 921600 bit/s
Device setup complete

Instead of patch not found it should produce:
Flash firmware /lib/firmware/brcm/BCM43430A1.hcd

I could not find this firmware via opkg, so i used a file from OpenELEC at
https://github.com/OpenELEC/misc-firmware/tree/master/firmware/brcm

This however won’t load and bluetooth is not initialized correctly and unusable:

root@LEDE:~# /usr/bin/hciattach /dev/ttyAMA0 bcm43xx 921600 noflow -
bcm43xx_init
Flash firmware /lib/firmware/brcm/BCM43430A1.hcd
Initialization timed out

 


25.11.20171190Base systemFeature RequestVery LowLowNETGEAR WNDR3800 USB LED trigger not work properly!TrunkAssigned Task Description

When I plug USB device in USB port, USB is working。I can copy data to usb device. The USB LED show green。But when the data is copying to usb device, the usb led do not blink, just is always green. I select usb trigger and select usbport hub1 and port1. It does not blink too. It means trigger dont work.

model: NETGEAR WNDR3800
Firmware Version LEDE Reboot SNAPSHOT r5420-332438b / LuCI Master (git-17.328.04231-802d5b6)
Kernel Version 4.9.63

By the way, my device work properly in 15.05.1 and 14.07. When I flash LEGE, it have been found this problem.

02.01.20181252Base systemBug ReportVery LowLowNo IP Assigned to Interface with QMI on Quectel EC-25ATrunkAssigned Task Description

I’m attempting to use QMI on a GL.Inet MiFi equipped with a Quectel EC-25A cellular modem.

When I configure the interface using qmi I am able to connect to the cellular network at the radio layer, however my wwan0 interface is not assigned an IP address. Here’s my configuration from /etc/config/network:

  config interface 'modem'
          option proto 'qmi'
          option ifname 'wwan0'
          option device '/dev/cdc-wdm0'
          option country 'country11'
          option apn 'inet.bell.ca'

And some commands showing the device behaviour. You’ll note that raw_ip needs to be set to Y. I’ve integrated this [patch](https://github.com/bmork/LEDE/commit/10aed12fa587e818e4dc5d0db54545623fbe9b5f) to have qmi.sh set the raw_ip mode when required.

  root@OpenWrt:~# cat /sys/class/net/wwan0/qmi/raw_ip
  Y
  root@OpenWrt:~# ifup modem
  root@OpenWrt:~# uqmi -d /dev/cdc-wdm0 --get-data-status
  "connected"
  root@OpenWrt:~# uqmi -d /dev/cdc-wdm0 --get-current-settings
  {
      "pdp-type": "ipv4",
      "ip-family": "ipv4",
      "mtu": 1500,
      "ipv4": {
          "ip": "100.105.180.51",
          "dns1": "206.47.201.246",
          "dns2": "207.231.231.254",
          "gateway": "100.105.180.52",
          "subnet": "255.255.255.248"
      },
      "ipv6": {
          
      },
      "domain-names": {
          
      }
  }
  root@OpenWrt:~# ifconfig wwan0
  wwan0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
            inet6 addr: fe80::d789:480e:bfc8:2dac/64 Scope:Link
            UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
            RX packets:28 errors:0 dropped:0 overruns:0 frame:0
            TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000 
            RX bytes:5129 (5.0 KiB)  TX bytes:768 (768.0 B)

If I manually use the uqmi command to connect to the cellular network I can then drive the wwan0 interface using dhcp successfully. Here’s my /etc/config/network.

  config interface 'modem'
          option proto 'dhcp'
          option ifname 'wwan0'

And the resulting successful network connection:

  root@OpenWrt:~# ifup modem
  root@OpenWrt:~# ifconfig wwan0
  wwan0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
            inet addr:100.105.180.51  P-t-P:100.105.180.51  Mask:255.255.255.248
            inet6 addr: fe80::d789:480e:bfc8:2dac/64 Scope:Link
            UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
            RX packets:80 errors:0 dropped:0 overruns:0 frame:0
            TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000 
            RX bytes:24102 (23.5 KiB)  TX bytes:16842 (16.4 KiB)
  root@OpenWrt:~# ping -c 1 google.ca
  PING google.ca (172.217.1.163): 56 data bytes
  64 bytes from 172.217.1.163: seq=0 ttl=51 time=29.792 ms
  1. – google.ca ping statistics —

1 packets transmitted, 1 packets received, 0% packet loss

  round-trip min/avg/max = 29.792/29.792/29.792 ms

I believe that for some reason the dhcp client isn’t being run on the wwan0 interface by qmi.sh once it’s online but I’m not able to determine how this is supposed to work. I’m eager to address this issue and submit the resulting patches. Please let me know if you can help.

  root@OpenWrt:~# ping -c 1 8.8.8.8
  PING 8.8.8.8 (8.8.8.8): 56 data bytes
  64 bytes from 8.8.8.8: seq=0 ttl=54 time=31.805 ms
  1. – 8.8.8.8 ping statistics —

1 packets transmitted, 1 packets received, 0% packet loss

  round-trip min/avg/max = 31.805/31.805/31.805 ms
17.07.20181664Base systemBug ReportVery LowHighUnable to use wan port (dhcp or static ip is not workin...AllAssigned Task Description

Device: Belkin F9K1115 v2
Software version: OpenWrt 18.06.0-rc1, LEDE after r3466-f6907dc

Unable to use wan port on any new software version (last known working LEDE version is r3466-f6907dc).
DHCP is not getting ip address. After setting up static ip address there is no network communication.

10.09.20181840Base systemBug ReportVery LowLowencryption wep+mixed brokenTrunkAssigned Task Description

In file lib/netifd/netifd-wireless.sh the following code is found:

  # Examples:
  # psk-mixed/tkip    => WPA1+2 PSK, TKIP
  # wpa-psk2/tkip+aes => WPA2 PSK, CCMP+TKIP
  # wpa2/tkip+aes     => WPA2 RADIUS, CCMP+TKIP

  case "$encryption" in
    wpa2*|*psk2*)
      wpa=2
    ;;  
    *mixed*)
      wpa=3
    ;;  
    wpa*|*psk*)
      wpa=1
    ;;  
    *)  
      wpa=0
      wpa_cipher=
    ;;
  esac

There are a few problems here, all relating to the comment and case of “*mixed*”

First and most importantly, setting wpa=3 causes hostapd to *exit* with an error and not bring up any configured ssid on the given radio.

Second, this was found when trying to set wep+mixed, which matches on *mixed* and completely breaks not only the wep setting, but the entire radio config. this should likely be changed to {wpa,psk}-mixed* or something similar to avoid colliding with wep+mixed. This will still leave those settings broken (as wpa=3 appears to be invalid) but at least it won’t improperly break wep+mixed as well.

Lastly, wpa3 is going to be a thing soon, so whatever is expecting wpa=3 is likely wrong and should be updated.

25.10.20192567KernelBug ReportVery LowMedium[ATH79] USB speed degradation on WDR4300openwrt-19.07Assigned Task Description

Hello!

I experience huge speed loss on the lastest build (Thu Oct 24 21:58:18 2019) using the ath79 snapshot image builder. I had the same problem on the ~2 weeks earlier build as well, just wanted to have a try on the up to date version now.
Built configuration on both 18.04.6 and 19.07:
PROFILE=tplink_tl-wdr4300-v1 PACKAGES=”block-mount diffutils f2fs-tools kmod-fs-f2fs kmod-mtd-rw kmod-usb-storage luci mailsend-nossl minidlna nfs-kernel-server ppp-mod-pppoe shadow-su transmission-daemon-mbedtls transmission-remote-mbedtls vsftpd usbreset zram-swap -ip6tables -kmod-ip6tables -kmod-ipv6 -kmod-nf-conntrack6 -kmod-nf-ipt6 -libopenssl1.1 -odhcp6c -odhcpd-ipv6only -luci-proto-ipv6 -libip6tc2”

Drive: Kingston DT G3 32GB (old one, better quality with Intel MLC flash)
Firewall: w and w/o flow offload on 19.07
Model: TP-Link WDR4300 v1

File read speeds:
18.06.4 orig vstpd 542M 75s 7,2MB/s
18.06.4 pepe2k vstpd 542M 64s 7,2MB/s
19.07 pepe2k vstpd 542M 543s 1,0MB/s
19.07 pepe2k dd+nc 256M 321s 0,8MB/s

- During the measurement, no root overlay was in use, just a general filesystem was attached
- lower speeds are really close to USB 1.x standard
- measurements took on fresh installations
- the degradation exists if only one drive is attached
- the degradation exists on both filesystem and block level.

I’m using pepe2k’s uboot image (CPU clocked to 600MHz). However I didn’t revert the uboot partition now, I did for a few weeks, nothing has changed.

Let me know if I can help the troubleshooting anyway. Dmesg logs are attached for all mentioned configurations (18.06.4 orig, 18.06.4 pepe2k, 19.07 pepe2k).

Best regards

16.03.20202905KernelBug ReportVery LowLowx86: RTC CMOS support is absent in kernel 5.4 .configTrunkAssigned Task Description

- Device problem occurs on booting

**dmesg | grep rtc**
[    1.041259] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    2.748158] hctosys: unable to open rtc device (rtc0)

**hwclock -rv**
hwclock from util-linux 2.35.1
System Time: 1584361762.617235
Trying to open: /dev/rtc0
Trying to open: /dev/rtc
Trying to open: /dev/misc/rtc
No usable clock interface found.
hwclock: Cannot access the Hardware Clock via any known method.

- Software versions of OpenWrt/LEDE release, packages, etc. Alix 2d13 Geode LX platform

**uname -a**
Linux OpenWrt 5.4.24 #0 Sun Mar 15 20:38:05 2020 i586 GNU/Linux

At ~/openwrt/build_dir/target-i386_pentium_musl/linux-x86_geode/linux-5.4.24/.config we see:

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set

- Steps to reproduce hmm... git clone && make menuconfig
changed: GCC flags -march=geode -mmmx
&& make kernel_menuconfig
changed: CONFIG_MGEODE_LX=y
&& make world

All works fine but /dev/rtc0 is absent

13.07.201650Base systemBug ReportMediumLowNo image or non-verbose output created if image is too ...TrunkNew Task Description

The target/install target does not produce the *squashfs-factory.bin and *squashfs-sysupgrade.bin binaries if the images are too big to fit the selected flash size.
However, make doesn’t say a word to the user but simply does not produce the files. The user has to either check the mtime of the files if they were created earlier or use

make target/install V=s

to derive what’s wrong.
According to jow on IRC this is just an artifact of no way to bypass silent mode. That might be the common explanation but it is still a bug from my POV.

17.08.201697Base systemBug ReportMediumLowdnsmasq doesn't receive updated dns servers when runnin...TrunkNew Task Description

Bind-mounting /tmp/resolv.conf.auto apparently doesn’t forward inotify events arriving from the kernel when resolv.conf.auto was changed (e.g. upstream DNS servers were received by a DHCP client or pppd). Restarting dnsmasq or running it without ujail solves the issue.

17.01.2017395Base systemBug ReportMediumLowmac80211.sh: detect_mac80211 should check available cha...TrunkNew Task Description

This problem was reported by few Netgear R8000 users and I managed to reproduce it. It’s related to the following code:

		vht_cap=$(iw phy "$dev" info | grep -c 'VHT Capabilities')
		cap_5ghz=$(iw phy "$dev" info | grep -c "Band 2")
		[ "$vht_cap" -gt 0 -a "$cap_5ghz" -gt 0 ] && {
			mode_band="a";
			channel="36"
			htmode="VHT80"
		}

Default htmode

The first problem is that even if hardware supports VHT80 it may be not available for every/any current channel. If channel 36 doesn’t support VHT80, for better user experience, it shouldn’t be set in /etc/config/wireless by default. Example:

root@lede:/# iw phy phy2 info
Wiphy phy2
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports roaming.
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 2:
                Capabilities: 0x1062
                        HT20/HT40
                        Static SM Power Save
                        RX HT20 SGI
                        RX HT40 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-23
                VHT Capabilities (0x0c025820):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        short GI (80 MHz)
                        SU Beamformer
                        SU Beamformee
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Frequencies:
                        * 5170 MHz [34] (disabled)
                        * 5180 MHz [36] (20.0 dBm)
                        * 5190 MHz [38] (disabled)
                        * 5200 MHz [40] (20.0 dBm)
                        * 5210 MHz [42] (disabled)
                        * 5220 MHz [44] (20.0 dBm)
                        * 5230 MHz [46] (disabled)
                        * 5240 MHz [48] (20.0 dBm)
                        * 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
                        * 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
                        * 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
                        * 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
                        * 5500 MHz [100] (20.0 dBm) (no IR, radar detection)
                        * 5520 MHz [104] (20.0 dBm) (no IR, radar detection)
                        * 5540 MHz [108] (20.0 dBm) (no IR, radar detection)
                        * 5560 MHz [112] (20.0 dBm) (no IR, radar detection)
                        * 5580 MHz [116] (20.0 dBm) (no IR, radar detection)
                        * 5600 MHz [120] (20.0 dBm) (no IR, radar detection)
                        * 5620 MHz [124] (20.0 dBm) (no IR, radar detection)
                        * 5640 MHz [128] (20.0 dBm) (no IR, radar detection)
                        * 5660 MHz [132] (20.0 dBm) (no IR, radar detection)
                        * 5680 MHz [136] (20.0 dBm) (no IR, radar detection)
                        * 5700 MHz [140] (20.0 dBm) (no IR, radar detection)
                        * 5720 MHz [144] (disabled)
                        * 5745 MHz [149] (disabled)
                        * 5765 MHz [153] (disabled)
                        * 5785 MHz [157] (disabled)
                        * 5805 MHz [161] (disabled)
                        * 5825 MHz [165] (disabled)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 1
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
                 * #{ AP } <= 4,
                   total <= 4, #channels <= 1, STA/AP BI must match
root@lede:/# iw phy phy2 channels
Band 2:
        * 5170 MHz [34] (disabled)
        * 5180 MHz [36] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+
        * 5190 MHz [38] (disabled)
        * 5200 MHz [40] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40-
        * 5210 MHz [42] (disabled)
        * 5220 MHz [44] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+
        * 5230 MHz [46] (disabled)
        * 5240 MHz [48] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40-
        * 5260 MHz [52] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5280 MHz [56] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5300 MHz [60] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5320 MHz [64] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5500 MHz [100] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5520 MHz [104] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5540 MHz [108] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5560 MHz [112] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5580 MHz [116] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5600 MHz [120] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5620 MHz [124] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5640 MHz [128] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5660 MHz [132] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5680 MHz [136] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5700 MHz [140] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5720 MHz [144] (disabled)
        * 5745 MHz [149] (disabled)
        * 5765 MHz [153] (disabled)
        * 5785 MHz [157] (disabled)
        * 5805 MHz [161] (disabled)
        * 5825 MHz [165] (disabled)

as you can see, VHT80 isn’t support on any currently available channel due to regulatory limits.

Default channel

Picking channel 36 blindly is a bad idea as it may not be available. In case of phy0/radio0 on Netgear R8000 only available channels are 149+ due to hardware/board design (see ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000).

root@lede:/# iw phy phy0 info
Wiphy phy0
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports roaming.
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 2:
                Capabilities: 0x1062
                        HT20/HT40
                        Static SM Power Save
                        RX HT20 SGI
                        RX HT40 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-23
                VHT Capabilities (0x0c025820):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        short GI (80 MHz)
                        SU Beamformer
                        SU Beamformee
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Frequencies:
                        * 5170 MHz [34] (disabled)
                        * 5180 MHz [36] (disabled)
                        * 5190 MHz [38] (disabled)
                        * 5200 MHz [40] (disabled)
                        * 5210 MHz [42] (disabled)
                        * 5220 MHz [44] (disabled)
                        * 5230 MHz [46] (disabled)
                        * 5240 MHz [48] (disabled)
                        * 5260 MHz [52] (disabled)
                        * 5280 MHz [56] (disabled)
                        * 5300 MHz [60] (disabled)
                        * 5320 MHz [64] (disabled)
                        * 5500 MHz [100] (disabled)
                        * 5520 MHz [104] (disabled)
                        * 5540 MHz [108] (disabled)
                        * 5560 MHz [112] (disabled)
                        * 5580 MHz [116] (disabled)
                        * 5600 MHz [120] (disabled)
                        * 5620 MHz [124] (disabled)
                        * 5640 MHz [128] (disabled)
                        * 5660 MHz [132] (disabled)
                        * 5680 MHz [136] (disabled)
                        * 5700 MHz [140] (disabled)
                        * 5720 MHz [144] (disabled)
                        * 5745 MHz [149] (20.0 dBm)
                        * 5765 MHz [153] (20.0 dBm)
                        * 5785 MHz [157] (20.0 dBm)
                        * 5805 MHz [161] (20.0 dBm)
                        * 5825 MHz [165] (20.0 dBm)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 1
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
                 * #{ AP } <= 4,
                   total <= 4, #channels <= 1, STA/AP BI must match
root@lede:/# iw phy phy0 channels
Band 2:
        * 5170 MHz [34] (disabled)
        * 5180 MHz [36] (disabled)
        * 5190 MHz [38] (disabled)
        * 5200 MHz [40] (disabled)
        * 5210 MHz [42] (disabled)
        * 5220 MHz [44] (disabled)
        * 5230 MHz [46] (disabled)
        * 5240 MHz [48] (disabled)
        * 5260 MHz [52] (disabled)
        * 5280 MHz [56] (disabled)
        * 5300 MHz [60] (disabled)
        * 5320 MHz [64] (disabled)
        * 5500 MHz [100] (disabled)
        * 5520 MHz [104] (disabled)
        * 5540 MHz [108] (disabled)
        * 5560 MHz [112] (disabled)
        * 5580 MHz [116] (disabled)
        * 5600 MHz [120] (disabled)
        * 5620 MHz [124] (disabled)
        * 5640 MHz [128] (disabled)
        * 5660 MHz [132] (disabled)
        * 5680 MHz [136] (disabled)
        * 5700 MHz [140] (disabled)
        * 5720 MHz [144] (disabled)
        * 5745 MHz [149] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+ VHT80
        * 5765 MHz [153] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40- VHT80
        * 5785 MHz [157] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+ VHT80
        * 5805 MHz [161] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40- VHT80
        * 5825 MHz [165] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz
09.03.2017609Base systemFeature RequestMediumLowprocd: implement runlevel 1TrunkNew Task Description

Sysupgrade currently kills processes with SIGKILL if they don’t shut down within 3 seconds after the SIGTERM signal. Some processes (e.g. domoticz) can take longer than 3 seconds to properly shut down. As this can potentially corrupt the sqlite database, it should be avoided.

While talking about this on IRC, it was suggested we should implement an “init 1” equivalent in procd. Adding this ticket as a reminder.

17.03.2017634Base systemBug ReportMediumMediumFactory flashing fails because LEDE filename is too lon...AllNew Task Description

On a TP-Link TL-WR841N v11, flashing LEDE from the web interface of the stock firmware is not possible.

This is caused by a stupid check that refuses filename longer than 64 chars in the web interface. The check is implemented in javascript and returns a cryptic error message like “Please select a file to upload”, as if no file was selected.

The current naming scheme is quite long:

$ echo ‘lede-17.01.0-r3205-59508e3-ar71xx-generic-tl-wr841-v11-squashfs-factory-eu.bin’ | wc -c
79

Shortening the name like the following would decrease the length below 64 chars, and leave some space for a custom suffix (e.g. using EXTRA_IMAGE_NAME in the Imagebuilder):

$ echo ‘lede-17.01.0-ar71xx-tlwr841v11-squashfs-factory-eu.bin’ | wc -c
55

18.11.20181958PackagesBug ReportMediumLowuqmi: unicode characters in SMS confuse uqmiTrunkNew Task Description

When using uqmi –get-message the message ends up truncated in case it contains unicode characters like german umlauts.

10.03.20192176KernelBug ReportMediumHighubiquiti loco xw (AR9342 Rev.2) stops receiving on wire...AllNew Task Description

This bug has been existing as long as the ubiquiti loco xw 5 ghz hardware is around, probably what we are dealing with is a hardware bug in the AR9342 Rev. 2 chip. It is somehow hard to reproduce, but it hits us reliable every couple of hours, sometimes days, running any version of OpenWrt up to todays master branch. It just happened again and this time I decided to check if the bug is actually listed on FS – in addition to creating the usual cron-job executing `iw dev wlan0 scan` every minute. There is even a watchdog in the community libremesh repository designed to catch exactly this bug:
https://github.com/libremesh/lime-packages/blob/master/packages/cotonete/Makefile#L21

So to run into it, here we got 2 ubiquiti nanobeam m5 devices running OpenWrt ar71xx/generic loco-m-xw pointing at each other over a distance of roughly 2km. This link is acceptable, but not perfect and slightly asymmetric.

Device A (worse RX SNR):

Station f0:9f:c2:xx:xx:7a (on wlan0-mesh)
	inactive time:	0 ms
	rx bytes:	1433997029
	rx packets:	8589913
	tx bytes:	23160025785
	tx packets:	15667682
	tx retries:	677924
	tx failed:	0
	rx drop misc:	30076
	signal:  	-76 [-79, -79] dBm
	signal avg:	-74 [-77, -77] dBm
	Toffset:	4887897799 us
	tx bitrate:	43.3 MBit/s MCS 10 short GI
	rx bitrate:	43.3 MBit/s MCS 4 short GI
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18117 seconds

Device B (better RX SNR)

Station fc:ec:da:xx:xx:8c (on wlan0-mesh)
	inactive time:	20 ms
	rx bytes:	23442553203
	rx packets:	16047526
	tx bytes:	1274688573
	tx packets:	8251479
	tx retries:	1337700
	tx failed:	2932
	rx drop misc:	45195
	signal:  	-72 [-79, -73] dBm
	signal avg:	-71 [-78, -73] dBm
	Toffset:	18446744068821653812 us
	tx bitrate:	57.8 MBit/s MCS 11 short GI
	rx bitrate:	43.3 MBit/s MCS 10 short GI
	last ack signal:24 dBm
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18179 seconds

Now it so happens that device A (and always only device A!) becomes deaf after some hours of mostly sending lots of traffic to device B. It will continue to send beacons, but loose all associations. device B will keep trying setting up a link, but it keeps ending up in ‘BLOCKED’ state and dumps using a monitor mode interface show that device A simply doesn’t react at all to any of the frames send by device B. A simple `iw dev wlan0 scan` on device A (which doesn’t give any results) fixes the problem.

The channel seems rather unused otherwise and signal quality only varies by weather conditions. Interestingly this seems to happen on non-DFS channels only. And it happens on Ad-Hoc mode (unencrypted, never tried encrypted) and 802.11s (open ie. setup via `iw` tool as well as with SAE ie. running `wpa_supplicant`) equally. It doesn’t happen on all nodes, but only on those with rather bad signal or at least one far-off neighbor.

Maybe related to FS#1246

I saw this occuring on ubnt nanostation loco m5 XW as well as on all nanobeam m5 variants (which is supposedly compatible with the loco-m-xw image).

ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47

WiFi EEPROM of the devices:

*
00001000  02 02 F0 9F C2 XX XX XX  00 30 3a 31 35 3a 36 64  |.....XXX.0:15:6d|
00001010  3a 64 64 3a 64 65 3a 61  64 00 00 00 00 00 1f 00  |:dd:de:ad.......|
00001020  33 01 00 00 00 00 04 00  00 00 2d 04 03 00 08 ff  |3.........-.....|
00001030  20 01 00 00 00 20 02 00  00 cc cc 0c 00 50 01 50  | .... .......P.P|
00001040  01 50 01 00 00 00 00 00  00 21 00 a4 00 00 00 00  |.P.......!......|
00001050  ff 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001060  0e 0e 03 00 2c e2 00 02  0e 1c e0 e0 00 0c e0 e0  |....,...........|
00001070  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001080  00 00 00 00 00 00 00 00  00 00 70 89 ac 00 00 00  |..........p.....|
00001090  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000010c0  00 00 00 70 ac 70 89 ac  70 89 ac 70 89 ac 22 22  |...p.p..p..p..""|
000010d0  22 22 22 22 22 22 22 22  20 1c 22 22 20 1c 22 22  |"""""""" ."" .""|
000010e0  20 1c 24 24 20 18 16 14  20 16 14 12 20 20 1c 14  | .$$ ... ...  ..|
000010f0  24 24 20 18 16 14 20 16  14 12 20 20 1c 14 24 24  |$$ ... ...  ..$$|
00001100  20 18 16 14 20 16 14 12  20 20 1c 14 22 22 1e 16  | ... ...  ..""..|
00001110  14 12 1e 14 12 10 20 20  1c 14 22 22 1e 16 14 12  |......  ..""....|
00001120  1e 14 12 10 20 20 1c 14  22 22 1e 16 14 12 1e 14  |....  ..""......|
00001130  12 10 20 20 1c 14 11 12  15 17 41 42 45 47 31 32  |..  ......ABEG12|
00001140  35 37 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |57pu..pu..pu..pu|
00001150  ac b8 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |..pu..pu..pu..pu|
*
00001170  ac b8 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |..<|<|<|<|<|<|<||
00001180  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
000011a0  3c 7c 10 01 00 00 22 22  02 00 00 00 00 00 00 00  |<|....""........|
000011b0  00 00 00 00 00 00 44 00  00 00 00 00 00 ff 00 00  |......D.........|
000011c0  00 00 00 00 00 00 00 00  00 00 00 00 ff 0e 0e 03  |................|
000011d0  00 2d e2 00 02 0e 1c 00  00 00 00 00 00 00 00 00  |.-..............|
000011e0  00 00 00 00 00 00 00 00  00 44 44 00 00 00 00 00  |.........DD.....|
000011f0  00 00 00 00 00 00 00 4c  58 68 8c a4 b4 bd cd d9  |.......LXh......|
00001200  00 89 00 00 00 dc 00 89  00 00 00 e0 00 8a 00 00  |................|
00001210  00 e2 00 8b 00 00 00 de  00 8b 00 00 00 de 00 8b  |................|
00001220  00 00 00 dc 00 89 00 00  00 da 00 8b 00 00 00 e0  |................|
00001230  00 89 00 00 00 e4 00 8a  00 00 00 e7 00 8b 00 00  |................|
00001240  00 e6 00 8b 00 00 00 e2  00 8c 00 00 00 e1 00 8c  |................|
00001250  00 00 00 df 00 8b 00 00  00 dd 00 8b 00 00 00 00  |................|
00001260  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00001280  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 4c  |...............L|
00001290  54 68 78 8c a0 b4 c5 4c  54 68 78 8c a0 b4 c5 4c  |Thx....LThx....L|
000012a0  54 68 78 8c a0 b4 c5 26  20 1e 1c 26 20 1e 1c 26  |Thx....& ..& ..&|
000012b0  20 1e 1c 26 20 1e 1c 26  20 1e 1c 26 20 1e 1c 26  | ..& ..& ..& ..&|
000012c0  20 1e 1c 26 20 1e 1c 26  22 20 1e 1c 1a 20 1e 1c  | ..& ..&" ... ..|
000012d0  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
000012e0  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
000012f0  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001300  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001310  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001320  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
00001330  1e 1c 1a 00 00 00 00 26  22 20 1e 1c 1a 20 1e 1c  |.......&" ... ..|
00001340  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
00001350  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
00001360  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001370  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001380  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001390  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
000013a0  1e 1c 1a 00 00 00 00 10  16 18 40 46 48 30 36 38  |..........@FH068|
000013b0  4c 54 68 78 8c a0 b9 cd  4c 54 68 78 8c a0 b9 cd  |LThx....LThx....|
*
000013f0  4c 54 68 78 8c a0 b9 cd  3c 7c 3c 7c 3c 7c 3c 7c  |LThx....<|<|<|<||
00001400  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
00001440  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
09.10.20192541KernelBug ReportMediumLowHardware offloading causes some flows to fail to be NAT...openwrt-19.07New Task Description

Just after a reboot, some flows are not NATed: packets from a machine in the LAN are sent to the WAN port with a private source IP address.

This is on a Linksys RE6500 (ramips mt7621) running openwrt 19.07-SNAPSHOT r10578-b3d70f628.
It is configured with flow_offloading and flow_offloading_hw.

Here is a tcpdump capture showing the problem on the WAN port (172.23.184.0/24 is my LAN address space):

root@openwrt:~# tcpdump -n -i eth0.20 net 172.23.184.0/24
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0.20, link-type EN10MB (Ethernet), capture size 262144 bytes
18:51:21.756552 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 112
18:51:22.651556 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148
18:51:26.681032 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 768
18:51:27.771654 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148

Here is what conntrack -L says:

udp      17 55 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=93 bytes=20412 [UNREPLIED] src=91.224.XX.YY dst=172.23.184.119 sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Notice the second dst= that shows the private IP address of the LAN machine.

After restarting the firewall, the flow is correctly NAT-ed and conntrack -L shows the correct entry (193.33.ZZ.WW is my public IP address):

udp      17 175 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=4 bytes=704 [UNREPLIED] src=91.224.XX.YY dst=193.33.ZZ.WW sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Note: when I only enable flow_offloading, the issue does not appear anymore, so this really seems to be an issue with the hw offloading integration in the firewall.

21.12.20192690Base systemBug ReportMediumMediumImagebuilder: "opkg_install_pkg: Package size mismatch"...AllNew Task Description

The Imagebuilder fails in the following situation:

  • download and unpack the imagebuilder
  • build an image: it works
  • wait a few days/weeks
  • try to build an image again with the same imagebuilder: it fails

It fails quite late during building with lots of errors like this:

   opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   opkg_install_cmd: Cannot install package luci.
   opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   opkg_install_cmd: Cannot install package base-files.
   opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   opkg_install_cmd: Cannot install package busybox.

This happens with stable releases (18.06.5), RC releases (19.07.0-rc2), and with several targets.

It looks like package sizes are somehow kept in a local cache during the first build, and are not updated when building again a few days later. This is strange because the imagebuilder seems to fetch new versions of the Packages.gz files.

Below is the full log.

  $ make image PROFILE=rb-nor-flash-16M"" BIN_DIR="${IMAGEBUILDER_DIR}" EXTRA_IMAGE_NAME="rzn" FILES="files/" PACKAGES="luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr -ppp -ppp-mod-pppoe -kmod-ppp -kmod-pppoe -kmod-pppox"
  
  Building images for ar71xx - MikroTik RouterBoard (16 MB SPI NOR)
  Packages: luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr base-files busybox dnsmasq dropbear firewall fstools ip6tables iptables kernel kmod-ath9k kmod-gpio-button-hotplug kmod-ledtrig-gpio libc libgcc logd mtd netifd odhcp6c odhcpd-ipv6only opkg rbcfg rssileds swconfig uboot-envtools uci uclient-fetch wpad-mini
  
  Downloading http://downloads.openwrt.org/releases/18.06.5/targets/ar71xx/mikrotik/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_core
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/base/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_base
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_luci
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_packages
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/routing/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_routing
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/telephony/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_telephony
  Downloading file:packages/Packages
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/imagebuilder
  
  Installing packages...
  Installing libc (1.1.19-2) to root...
  Installing libgcc (7.3.0-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libgcc_7.3.0-2_mips_24kc.ipk.
  Configuring libgcc.
  Configuring libc.
  Installing kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) to root...
  Configuring kernel.
  Installing luci (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci_git-19.353.67991-868abc1-1_all.ipk
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libubox_2018-07-25-c83a84af-2_mips_24kc.ipk.
  Installing luci-mod-admin-full (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-mod-admin-full_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-en (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-en_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-base (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-base_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-i18n-firewall-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-firewall-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-app-firewall (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-app-firewall_git-19.353.67991-868abc1-1_all.ipk
  Installing base-files (194.2-r7897-9d401013fc) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/base-files_194.2-r7897-9d401013fc_mips_24kc.ipk.
  Installing libuci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libuci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing busybox (1.28.4-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/busybox_1.28.4-3_mips_24kc.ipk.
  Installing dnsmasq (2.80-1.4) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dnsmasq_2.80-1.4_mips_24kc.ipk.
  Installing dropbear (2017.75-7.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dropbear_2017.75-7.1_mips_24kc.ipk.
  Installing firewall (2018-08-13-1c4d5bcd-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/firewall_2018-08-13-1c4d5bcd-1_mips_24kc.ipk.
  Installing fstools (2019-03-28-ff1ded63-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/fstools_2019-03-28-ff1ded63-5_mips_24kc.ipk.
  Installing ip6tables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/ip6tables_1.6.2-3_mips_24kc.ipk.
  Installing kmod-nf-reject6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-reject6_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt6_4.9.198-1_mips_24kc.ipk
  Installing kmod-ipt-core (4.9.198-1) to root...
  Downloading file:packages/kmod-ipt-core_4.9.198-1_mips_24kc.ipk
  Installing kmod-ip6tables (4.9.198-1) to root...
  Downloading file:packages/kmod-ip6tables_4.9.198-1_mips_24kc.ipk
  Installing libip4tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip4tc_1.6.2-3_mips_24kc.ipk.
  Installing libip6tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip6tc_1.6.2-3_mips_24kc.ipk.
  Installing libxtables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libxtables_1.6.2-3_mips_24kc.ipk.
  Installing iptables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/iptables_1.6.2-3_mips_24kc.ipk.
  Package iptables (1.6.2-3) installed in root is up to date.
  Package kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) installed in root is up to date.
  Installing kmod-ath9k (4.9.198+2017-11-01-10) to root...
  Downloading file:packages/kmod-ath9k_4.9.198%2b2017-11-01-10_mips_24kc.ipk
  Installing libnl-tiny (0.1-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libnl-tiny_0.1-5_mips_24kc.ipk.
  Installing kmod-gpio-button-hotplug (4.9.198-2) to root...
  Downloading file:packages/kmod-gpio-button-hotplug_4.9.198-2_mips_24kc.ipk
  Installing kmod-ledtrig-gpio (4.9.198-1) to root...
  Downloading file:packages/kmod-ledtrig-gpio_4.9.198-1_mips_24kc.ipk
  Package libc (1.1.19-2) installed in root is up to date.
  Package libgcc (7.3.0-2) installed in root is up to date.
  Installing logd (2018-02-14-128bc35f-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/logd_2018-02-14-128bc35f-2_mips_24kc.ipk.
  Installing mtd (23) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/mtd_23_mips_24kc.ipk.
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Installing netifd (2019-01-31-a2aba5c7-2.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/netifd_2019-01-31-a2aba5c7-2.1_mips_24kc.ipk.
  Installing odhcp6c (2018-07-14-67ae6a71-15) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcp6c_2018-07-14-67ae6a71-15_mips_24kc.ipk.
  Installing odhcpd-ipv6only (1.15-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcpd-ipv6only_1.15-3_mips_24kc.ipk.
  Installing opkg (2019-06-14-dcbc142e-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/opkg_2019-06-14-dcbc142e-1_mips_24kc.ipk.
  Installing rbcfg (2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rbcfg_2_mips_24kc.ipk.
  Installing rssileds (0.2-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rssileds_0.2-1_mips_24kc.ipk.
  Installing swconfig (11) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/swconfig_11_mips_24kc.ipk.
  Installing uboot-envtools (2018.03-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uboot-envtools_2018.03-1_mips_24kc.ipk.
  Installing uci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing uclient-fetch (2018-11-24-3ba74ebc-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uclient-fetch_2018-11-24-3ba74ebc-1_mips_24kc.ipk.
  Installing wpad-mini (2018-05-21-62566bc2-8) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/wpad-mini_2018-05-21-62566bc2-8_mips_24kc.ipk.
  Configuring kmod-nf-reject6.
  Configuring uboot-envtools.
  Configuring kmod-ledtrig-gpio.
  Configuring rbcfg.
  Configuring luci-app-firewall.
  Configuring kmod-nf-ipt.
  Configuring libxtables.
  Configuring libip4tc.
  Configuring kmod-nf-ipt6.
  Configuring kmod-ipt-core.
  Configuring kmod-ip6tables.
  Configuring fstools.
  Configuring libip6tc.
  Configuring luci-base.
  Configuring luci-mod-admin-full.
  Configuring kmod-gpio-button-hotplug.
  Configuring luci-i18n-firewall-fr.
  Configuring iptables.
  Configuring ip6tables.
  Configuring luci-i18n-base-en.
  Configuring luci-i18n-base-fr.
  Collected errors:
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package luci.
   * opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   * opkg_install_cmd: Cannot install package base-files.
   * opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   * opkg_install_cmd: Cannot install package busybox.
   * opkg_install_pkg: Package size mismatch: dnsmasq is 99783 bytes, expecting 99775 bytes
   * opkg_install_cmd: Cannot install package dnsmasq.
   * opkg_install_pkg: Package size mismatch: dropbear is 86613 bytes, expecting 86610 bytes
   * opkg_install_cmd: Cannot install package dropbear.
   * opkg_install_pkg: Package size mismatch: firewall is 40776 bytes, expecting 40777 bytes
   * opkg_install_cmd: Cannot install package firewall.
   * opkg_install_pkg: Package size mismatch: libnl-tiny is 12953 bytes, expecting 12948 bytes
   * opkg_install_cmd: Cannot install package kmod-ath9k.
   * opkg_install_pkg: Package size mismatch: logd is 10114 bytes, expecting 10111 bytes
   * opkg_install_cmd: Cannot install package logd.
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package mtd.
   * opkg_install_pkg: Package size mismatch: netifd is 62005 bytes, expecting 62004 bytes
   * opkg_install_cmd: Cannot install package netifd.
   * opkg_install_pkg: Package size mismatch: odhcp6c is 23650 bytes, expecting 23646 bytes
   * opkg_install_cmd: Cannot install package odhcp6c.
   * opkg_install_pkg: Package size mismatch: odhcpd-ipv6only is 28830 bytes, expecting 28845 bytes
   * opkg_install_cmd: Cannot install package odhcpd-ipv6only.
   * opkg_install_pkg: Package size mismatch: opkg is 58890 bytes, expecting 58895 bytes
   * opkg_install_cmd: Cannot install package opkg.
   * opkg_install_pkg: Package size mismatch: rssileds is 4056 bytes, expecting 4059 bytes
   * opkg_install_cmd: Cannot install package rssileds.
   * opkg_install_pkg: Package size mismatch: swconfig is 9478 bytes, expecting 9484 bytes
   * opkg_install_cmd: Cannot install package swconfig.
   * opkg_install_pkg: Package size mismatch: uci is 7267 bytes, expecting 7262 bytes
   * opkg_install_cmd: Cannot install package uci.
   * opkg_install_pkg: Package size mismatch: uclient-fetch is 7489 bytes, expecting 7485 bytes
   * opkg_install_cmd: Cannot install package uclient-fetch.
   * opkg_install_pkg: Package size mismatch: wpad-mini is 258733 bytes, expecting 258725 bytes
   * opkg_install_cmd: Cannot install package wpad-mini.
  make[2]: *** [Makefile:153: package_install] Error 255
  make[1]: *** [Makefile:114: _call_image] Error 2
  make: *** [Makefile:193: image] Error 2
08.05.20203070Base systemBug ReportMediumLowkmod-cryptodev: WARNING: possible circular locking depe...TrunkNew Task Description

OpenWrt master r13174-73fa1aba94 on octeon with kernel 5.4

[   70.971145] 
[   70.972662] ======================================================
[   70.978843] WARNING: possible circular locking dependency detected
[   70.985029] 5.4.39 #0 Not tainted
[   70.988348] ------------------------------------------------------
[   70.994531] unbound/2895 is trying to acquire lock:
[   70.999414] 800000041baeb868 (&pcr->fcrypt.sem){+.+.}, at: crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.009267] 
[   71.009267] but task is already holding lock:
[   71.015103] 800000041b911468 (&ses_new->sem){+.+.}, at: crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.024691] 
[   71.024691] which lock already depends on the new lock.
[   71.024691] 
[   71.032866] 
[   71.032866] the existing dependency chain (in reverse order) is:
[   71.040347] 
[   71.040347] -> #1 (&ses_new->sem){+.+.}:
[   71.045773]        lock_acquire+0xe0/0x220
[   71.049888]        __mutex_lock+0x94/0x628
[   71.054001]        crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.060365]        crypto_get_session_by_sid+0x1e4/0x12b8 [cryptodev]
[   71.066806]
[   71.066806] -> #0 (&pcr->fcrypt.sem){+.+.}:
[   71.072485]        check_noncircular+0x1a8/0x260
[   71.077110]        __lock_acquire+0x12f8/0x19f8
[   71.081648]        lock_acquire+0xe0/0x220
[   71.085754]        __mutex_lock+0x94/0x628
[   71.089862]        crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.096226]        crypto_get_session_by_sid+0x6cc/0x12b8 [cryptodev]
[   71.102666]
[   71.102666] other info that might help us debug this:
[   71.102666]
[   71.110668]  Possible unsafe locking scenario:
[   71.110668]
[   71.116588]        CPU0                    CPU1
[   71.121119]        ----                    ----
[   71.125650]   lock(&ses_new->sem);
[   71.129058]                                lock(&pcr->fcrypt.sem);
[   71.135242]                                lock(&ses_new->sem);
[   71.141165]   lock(&pcr->fcrypt.sem);
[   71.144834]
[   71.144834]  *** DEADLOCK ***
[   71.144834]
[   71.150756] 1 lock held by unbound/2895:
[   71.154681]  #0: 800000041b911468 (&ses_new->sem){+.+.}, at: crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.164700]
[   71.164700] stack backtrace:
[   71.169067] CPU: 1 PID: 2895 Comm: unbound Not tainted 5.4.39 #0
[   71.175075] Stack : ffffffff82790000 0000000000000000 0000000010108ce0 ed34220aed96997f
[   71.183091]         ed34220aed96997f 0000000000000000 800000041bb976f8 ffffffff837d0000
[   71.191106]         0000000000000000 0000000000000001 0000000000000000 ffffffff811ac4bc
[   71.199118]         6e626f756e64204e 0000000000000000 ffffffffffffffff 0000000000000010
[   71.207132]         0000000000000000 ffffffff81b40000 fffe000000000000 ffffffff81bc0000
[   71.215145]         0000000000000000 0000000000000000 ffffffff81b40000 0000000000000000
[   71.223158]         800000041f2e6200 0000000000000000 ffffffff81597628 1e00000010734ac7
[   71.231173]         0000000000000001 800000041bb94000 800000041bb976f0 47500c0a872e7996
[   71.239186]         ffffffff81865d8c 0000000000000000 800000041bb97828 ed34220aed96997f
[   71.247198]         ffffffff81b40bf7 ffffffff81865c54 ffffffff8111d4c8 ffffffff81a42a50
[   71.255213]         ...
[   71.257668] Call Trace:
[   71.260136] [<ffffffff8111d4c8>] show_stack+0x40/0x128
[   71.265288] [<ffffffff81865d8c>] dump_stack+0xe4/0x150
[   71.270444] [<ffffffff8119fb58>] check_noncircular+0x1a8/0x260
[   71.276289] [<ffffffff811a2d38>] __lock_acquire+0x12f8/0x19f8
[   71.282046] [<ffffffff811a3d80>] lock_acquire+0xe0/0x220
[   71.287374] [<ffffffff8188532c>] __mutex_lock+0x94/0x628
[   71.292706] [<ffffffffc02a7638>] crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.300290] [<ffffffffc02a7cc4>] crypto_get_session_by_sid+0x6cc/0x12b8 [cryptodev]
Showing tasks 1 - 50 of 1032 Page 1 of 211 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing