OpenWrt/LEDE Project

Welcome to the OpenWrt Project bug reporting and issue tracking system

Problems to be reported here are for the current OpenWrt and legacy LEDE Project’s targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to openwrt-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeverity  descSummaryReported InStatus
01.02.20181319KernelBug ReportVery LowLowSupport of PC Engines APU1TrunkUnconfirmed Task Description

Is it possible to use LEDs and GPIOs on PC Engines APU1? APU2 works, but APU1 have not drivers.

01_led and 02_network in x86 platform have a support for APU1 but I am not able to find a kernel module as in apu2 platform.

Thanks for answer, Zbynek Kocur


31.01.20181316Base systemBug ReportVery LowLowkernel, serial line, pl2303 changes breaks ntpd with RA...TrunkUnconfirmed Task Description

kernel time, pl2303, serial line kenel module

Device and Software:

TP-Link 4300v1
OpenWRT 17.01.4, r3560-79f57e422d
Component: kernel, serial line, pl2303

Setup:

ntpd V4.2.6p5 and V4.2.8p10(cross compiled with clock RAWDCF)
reference clock
  server 127.127.8.0-3 mode 5
  RAW DCF77 100/200ms pulses
pl2303 usb to serial adapter (/dev/ttyUSB0)
=> set to 50 Baud by ntpd when opening
DCF77 reciever connected per serial line to pl2303
=> No problem with V12.09 with Attitude Adjustment
   Time decode with dcfd and ntpd works absolutely reliable.
The 100ms/200ms pulses send from the DCF77 reciever code bits "0" and "1".
The length of the signal on the serial RX line is decoded by the ntpd.
One bit per second is send. After 60 seconds the telegram is decoded to the actual time and date.  
 => The puls length hat to be acurately "send" through the pl2303 to the kernel serial line driver into ntpd.

Problem:

Since V15, and also on the latest V17.01.4 the dcfd and ntpd could not decode the dcf telegram.
There always "1" decoded, or the transmission is invalid, due to inconsitency "flapping" bits

Suggestions:

Suspect some changes in the Linux kernel which effects the timne measurement 
or inside the pl2303 driver, so the bits are not corretly decoded (100ms/200ms).

Reproduce/Debug:

I'm able to test new kernel and driver modules on my test environmet
perhaps "setserial" (can't fint it anywhere) can set some serial line parameters

Working well on TP-Link 4300, V12.09:

root@funk:~# ntpq -p
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
*GENERIC(0)      .DCFa.           0 l   24   64  377    0.000   -0.236   0.430
 funk.koelle.... .INIT.          16 u    - 1024    0    0.000    0.000   0.000
+ntps1-0.eecsit. .PPS.            1 u   52   64  177   28.454   -0.638   2.367
+ptbtime2.ptb.de .PTB.            1 u   20   64  377   19.201   -0.495   2.739
+rustime01.rus.u .PZF.            1 u   26   64  377   18.828   -1.042   2.059
+ntp2.rrze.uni-e .GPS.            1 u   32   64  377   19.264   -0.737   2.068
-ntp2.belwue.de  .PZF.            1 u   43   64  377   21.406   -1.818   1.428
-ts-1.rz.rwth-aa .GPS.            1 u   13   64  377   18.941   -1.521   0.810
 LOCAL(0)        .LOCL.          10 l   4d   64    0    0.000    0.000   0.000

root@funk:~# ntpq -c clockv
associd=0 status=00e0 , 14 events, clk_unspec,
device="RAW DCF77 CODE (Conrad DCF77 receiver module)",
timecode="-####--#-#-###----M-S1-4-1--P-----2P1---1212-1-------81---p",
poll=5549, noreply=0, badformat=0, baddata=7, fudgetime1=191.700,
stratum=0, refid=DCFa, flags=0,
refclock_time="de1c9459.00000000  Wed, Jan 31 2018 19:15:37.000",
refclock_status="TIME CODE; (LEAP INDICATION; ANTENNA)",
refclock_format="RAW DCF77 Timecode",
refclock_states="*NOMINAL: 4d+02:30:16 (99.85%); ILLEGAL DATE: 00:08:37 (0.14%); running time: 4d+02:38:53"

</code>

It would be verry nice if someone could have an insight into this problem.

Many thanks

Lars

28.01.20181305PackagesBug ReportVery LowLowNot working UAS driver for usb hdd case ORICO 2599US3-V...TrunkUnconfirmed Task Description

- Xiaomi Mi Router 3G
- OpenWrt/LEDE trunk with kmod-usb-storage-uas package.
- After fresh install trunk version and kmod-usb-storage-uas drivers for USB storage have error:

[  457.174784] scsi host0: uas
[  457.178931] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for disabled endpoint or incorrect stream ring
[  457.188303] xhci-mtk 1e1c0000.xhci: @000000000fded170 0ee20000 00000000 05000000 01058001
[  457.196514] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for disabled endpoint or incorrect stream ring
[  457.205879] xhci-mtk 1e1c0000.xhci: @000000000fded180 0ee20100 00000000 05000000 01078001
[  464.441727] Data buffer not 16 bytes aligned: 8ee2c458
[  464.469820] Data buffer not 16 bytes aligned: 8ee2c0d8
[  464.477079] Data buffer not 16 bytes aligned: 8ee2c368
[  477.979944] scsi 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[  477.987509] scsi 0:0:0:0: tag#0 CDB: opcode=0x12 12 00 00 00 24 00
[  479.029938] scsi host0: uas_eh_bus_reset_handler FAILED to get lock err -16
[  479.036896] scsi 0:0:0:0: Device offlined - not ready after error recovery
 

FULL log

[    0.000000] Linux version 4.9.77 (buildbot@builds) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r5972-74beb6f) ) #0 SMP Sun Jan 28 07:53:50 2018
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Xiaomi Mi Router 3G
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 10000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat 80519c20, node_mem_map 81003000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000] percpu: Embedded 12 pages/cpu @8120f000 s17744 r8192 d23216 u49152
[    0.000000] pcpu-alloc: s17744 r8192 d23216 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Writing ErrCtl register=00022211
[    0.000000] Readback ErrCtl register=00022211
[    0.000000] Memory: 253888K/262144K available (4083K kernel code, 221K rwdata, 920K rodata, 204K init, 272K bss, 8256K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.007796] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.070423] pid_max: default: 32768 minimum: 301
[    0.075160] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.081686] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.095326] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.095339] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.095351] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.095506] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.177455] Synchronize counters for CPU 1:
[    0.177457] done.
[    0.190893] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.190901] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.190910] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.190995] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.269476] Synchronize counters for CPU 2:
[    0.269477] done.
[    0.279363] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.279371] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.279379] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.279472] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.354659] Synchronize counters for CPU 3:
[    0.354660] done.
[    0.360901] Brought up 4 CPUs
[    0.367821] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.377613] futex hash table entries: 1024 (order: 3, 32768 bytes)
[    0.383863] pinctrl core: initialized pinctrl subsystem
[    0.389755] NET: Registered protocol family 16
[    0.403515] FPU Affinity set after 11720 emulations
[    0.449650] pull PCIe RST: RALINK_RSTCTRL = 4000000
[    0.754956] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.760005] ***** Xtal 40MHz *****
[    0.763360] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.768459] Port 0 N_FTS = 1b105000
[    0.771934] Port 1 N_FTS = 1b105000
[    0.775368] Port 2 N_FTS = 1b102800
[    1.930662] PCIE2 no card, disable it(RST&CLK)
[    1.935027]  -> 21007f2
[    1.937422] PCIE0 enabled
[    1.940014] PCIE1 enabled
[    1.942610] PCI host bridge /pcie@1e140000 ranges:
[    1.947395]  MEM 0x0000000060000000..0x000000006fffffff
[    1.952552]   IO 0x000000001e160000..0x000000001e16ffff
[    1.957754] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    2.009324] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    2.015156] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    2.020966] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    2.027884] PCI host bridge to bus 0000:00
[    2.031941] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    2.038727] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    2.044616] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    2.051341] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.059269] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    2.059300] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.059312] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
[    2.059374] pci 0000:00:00.0: supports D1
[    2.059383] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.059617] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    2.059641] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.059656] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
[    2.059705] pci 0000:00:01.0: supports D1
[    2.059713] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    2.060115] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
[    2.060145] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    2.060267] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    2.060466] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.060648] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
[    2.060683] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    2.060728] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.060816] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    2.061016] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    2.061034] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[    2.061093] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    2.067602] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.074545] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    2.081087] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.088015] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    2.094738] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
[    2.101497] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
[    2.108649] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
[    2.115404] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
[    2.122138] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
[    2.128881] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.133788] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    2.140555] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
[    2.147793] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
[    2.154968] pci 0000:00:01.0: PCI bridge to [bus 02]
[    2.159885] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
[    2.166635] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff pref]
[    2.173807] BAR0 at slot 0 = 0
[    2.176821] bus=0x0, slot = 0x0
[    2.179929] BAR0 at slot 1 = 0
[    2.182941] bus=0x0, slot = 0x1
[    2.186059] bus=0x1, slot = 0x0, irq=0xff
[    2.190052] bus=0x2, slot = 0x1, irq=0xff
[    2.195374] clocksource: Switched to clocksource GIC
[    2.201886] NET: Registered protocol family 2
[    2.206991] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    2.213879] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    2.220380] TCP: Hash tables configured (established 2048 bind 2048)
[    2.226740] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.232503] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.238991] NET: Registered protocol family 1
[    2.243310] PCI: CLS 80 bytes, default 32
[    2.475320] 4 CPUs re-calibrate udelay(lpj = 2924544)
[    2.481720] Crashlog allocated RAM at address 0x3f00000
[    2.487253] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[    2.497205] random: fast init done
[    2.503153] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.508957] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.521334] io scheduler noop registered
[    2.525170] io scheduler deadline registered (default)
[    2.530800] gpio-export gpio_export: 1 gpio(s) exported
[    2.536631] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    2.546698] console [ttyS0] disabled
[    2.550247] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
[    2.559239] console [ttyS0] enabled
[    2.566106] bootconsole [early0] disabled
[    2.575604] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[    2.582660] Allocate 16 byte aligned buffer: 80588360
[    2.587709] Enable NFI Clock
[    2.590575] # MTK NAND # : Use HW ECC
[    2.594233] Device not found, ID: c8d1
[    2.597975] Not Support this Device!
[    2.601702] chip_mode=00000001
[    2.604750] Support this Device in MTK table! c8d1
[    2.609710] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
[    2.616186] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
[    2.622507] nand: ESMT NAND 128MiB 3,3V 8-bit
[    2.626855] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    2.634399] Scanning device for bad blocks
[    2.784501] 10 ofpart partitions found on MTD device MT7621-NAND
[    2.790493] Creating 10 MTD partitions on "MT7621-NAND":
[    2.795810] 0x000000000000-0x000000080000 : "Bootloader"
[    2.802545] 0x000000080000-0x0000000c0000 : "Config"
[    2.808805] 0x0000000c0000-0x000000100000 : "Bdata"
[    2.814961] 0x000000100000-0x000000140000 : "Factory"
[    2.821369] 0x000000140000-0x000000180000 : "crash"
[    2.827570] 0x000000180000-0x0000001c0000 : "crash_syslog"
[    2.834259] 0x0000001c0000-0x000000200000 : "reserved0"
[    2.840866] 0x000000200000-0x000000600000 : "kernel_stock"
[    2.847705] 0x000000600000-0x000000a00000 : "kernel"
[    2.853942] 0x000000a00000-0x000007f80000 : "ubi"
[    2.860898] [mtk_nand] probe successfully!
[    2.865771] Signature matched and data read!
[    2.870021] load_fact_bbt success 1023
[    2.874429] libphy: Fixed MDIO Bus: probed
[    2.947980] libphy: mdio: probed
[    4.350751] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[    4.357511] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
[    4.368063] NET: Registered protocol family 10
[    4.374121] NET: Registered protocol family 17
[    4.378695] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.391609] 8021q: 802.1Q VLAN Support v1.8
[    4.398759] UBI: auto-attach mtd9
[    4.402087] ubi0: attaching mtd9
[    4.618462] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
[    5.521109] ubi0: scanning is finished
[    5.541359] ubi0: attached mtd9 (name "ubi", size 117 MiB)
[    5.546892] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    5.553734] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    5.560504] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    5.567456] ubi0: good PEBs: 940, bad PEBs: 0, corrupted PEBs: 0
[    5.573433] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    5.580638] ubi0: max/mean erase counter: 13/8, WL threshold: 4096, image sequence number: 2038926528
[    5.589837] ubi0: available PEBs: 0, total reserved PEBs: 940, PEBs reserved for bad PEB handling: 20
[    5.599059] ubi0: background thread "ubi_bgt0d" started, PID 375
[    5.601341] block ubiblock0_0: created from ubi0:0(rootfs)
[    5.601351] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    5.601368] hctosys: unable to open rtc device (rtc0)
[    5.628756] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    5.636357] Freeing unused kernel memory: 204K
[    5.640789] This architecture does not have kernel memory protection.
[    6.074383] init: Console is alive
[    6.078103] init: - watchdog -
[    6.598228] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    6.689821] usbcore: registered new interface driver usbfs
[    6.695512] usbcore: registered new interface driver hub
[    6.700979] usbcore: registered new device driver usb
[    6.715182] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    6.720568] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[    6.735589] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
[    6.744061] xhci-mtk 1e1c0000.xhci: irq 19, io mem 0x1e1c0000
[    6.750901] hub 1-0:1.0: USB hub found
[    6.754722] hub 1-0:1.0: 2 ports detected
[    6.759206] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    6.764511] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[    6.772203] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.781167] hub 2-0:1.0: USB hub found
[    6.784977] hub 2-0:1.0: 1 port detected
[    6.791578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.815674] init: - preinit -
[    7.225713] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
[    7.959769] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
[   10.669578] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 466
[   10.743280] UBIFS (ubi0:1): recovery needed
[   11.027687] UBIFS (ubi0:1): recovery completed
[   11.032307] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   11.040127] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   11.050019] UBIFS (ubi0:1): FS size: 112754688 bytes (107 MiB, 888 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
[   11.060604] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[   11.067215] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 20B5BE78-6BF9-4D9C-97D0-63EEEE29FCD2, small LPT model
[   11.089886] mount_root: overlay filesystem has not been fully initialized yet
[   11.099816] mount_root: switching to ubifs overlay
[   11.120963] urandom-seed: Seed file not found (/etc/urandom.seed)
[   11.206878] procd: - early -
[   11.209848] procd: - watchdog -
[   11.915518] procd: - watchdog -
[   11.918952] procd: - ubus -
[   11.977423] procd: - init -
[   12.220332] kmodloader: loading kernel modules from /etc/modules.d/*
[   12.230433] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   12.243720] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   12.251747] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   12.260419] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.272071] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[   12.311093] xt_time: kernel timezone is -0000
[   12.364278] mt7603e 0000:01:00.0: ASIC revision: 76030010
[   12.395013] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
[   12.400808] mt7603e 0000:01:00.0: Build Time: 20160107100755
[   12.445412] firmware init done
[   12.617059] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.624541] mt76x2e 0000:02:00.0: ASIC revision: 76120044
[   12.655444] mt76x2e 0000:02:00.0: ROM patch already applied
[   12.662251] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
[   12.667798] mt76x2e 0000:02:00.0: Build: 1
[   12.671877] mt76x2e 0000:02:00.0: Build Time: 201507311614____
[   12.705439] mt76x2e 0000:02:00.0: Firmware running!
[   12.711683] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   12.719726] PPP generic driver version 2.4.2
[   12.725836] NET: Registered protocol family 24
[   12.733132] kmodloader: done loading kernel modules from /etc/modules.d/*
[   19.603555] device eth0 entered promiscuous mode
[   19.610919] br-lan: port 1(eth0.1) entered blocking state
[   19.616476] br-lan: port 1(eth0.1) entered disabled state
[   19.622586] device eth0.1 entered promiscuous mode
[   19.634503] br-lan: port 1(eth0.1) entered blocking state
[   19.639985] br-lan: port 1(eth0.1) entered forwarding state
[   19.646017] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   20.605960] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   22.159899] random: crng init done
[  191.009312] Data buffer not 16 bytes aligned: 8e40c028
[  191.017026] Data buffer not 16 bytes aligned: 8e40c508
[  191.025523] Data buffer not 16 bytes aligned: 8e40c238
[  191.034117] Data buffer not 16 bytes aligned: 8e40c198
[  191.052419] Data buffer not 16 bytes aligned: 8e40c4f8
[  191.066409] Data buffer not 16 bytes aligned: 8e40c278
[  191.081738] Data buffer not 16 bytes aligned: 8e40c1c8
[  191.096954] Data buffer not 16 bytes aligned: 8e40c088
[  191.111147] Data buffer not 16 bytes aligned: 8e40c028
[  191.139460] Data buffer not 16 bytes aligned: 8e40c018
[  191.161243] Data buffer not 16 bytes aligned: 8e40c028
[  191.176451] Data buffer not 16 bytes aligned: 8e40c128
[  191.193724] Data buffer not 16 bytes aligned: 8e40c018
[  191.213324] Data buffer not 16 bytes aligned: 8e40c078
[  191.225880] Data buffer not 16 bytes aligned: 8e40c2a8
[  191.265755] Data buffer not 16 bytes aligned: 8e40c158
[  191.278589] Data buffer not 16 bytes aligned: 8e40c138
[  191.289159] Data buffer not 16 bytes aligned: 8e40c248
[  191.317077] Data buffer not 16 bytes aligned: 8e40c278
[  191.334425] Data buffer not 16 bytes aligned: 8e40c0e8
[  191.350534] Data buffer not 16 bytes aligned: 8e40c0f8
[  283.715442] kmodloader: loading kernel modules from /etc/modules.d/*
[  283.733985] SCSI subsystem initialized
[  283.745511] usbcore: registered new interface driver usb-storage
[  283.751874] kmodloader: done loading kernel modules from /etc/modules.d/*
[  283.816960] kmodloader: loading kernel modules from /etc/modules.d/*
[  283.825496] kmodloader: done loading kernel modules from /etc/modules.d/*
[  313.727224] Data buffer not 16 bytes aligned: 8ee38068
[  313.741091] Data buffer not 16 bytes aligned: 8ee38128
[  313.749533] Data buffer not 16 bytes aligned: 8ee38078
[  313.756765] Data buffer not 16 bytes aligned: 8ee383d8
[  313.785037] Data buffer not 16 bytes aligned: 8ee38128
[  313.795667] Data buffer not 16 bytes aligned: 8ee38258
[  313.805290] Data buffer not 16 bytes aligned: 8ee38418
[  313.813705] Data buffer not 16 bytes aligned: 8ee381a8
[  313.822188] Data buffer not 16 bytes aligned: 8ee380d8
[  313.840545] Data buffer not 16 bytes aligned: 8ee38438
[  313.848969] Data buffer not 16 bytes aligned: 8ee382d8
[  434.295326] kmodloader: loading kernel modules from /etc/modules.d/*
[  434.305009] usbcore: registered new interface driver ums-alauda
[  434.312020] usbcore: registered new interface driver ums-cypress
[  434.319060] usbcore: registered new interface driver ums-datafab
[  434.326131] usbcore: registered new interface driver ums-freecom
[  434.333240] usbcore: registered new interface driver ums-isd200
[  434.340310] usbcore: registered new interface driver ums-jumpshot
[  434.347438] usbcore: registered new interface driver ums-karma
[  434.354646] usbcore: registered new interface driver ums-sddr09
[  434.361748] usbcore: registered new interface driver ums-sddr55
[  434.368806] usbcore: registered new interface driver ums-usbat
[  434.374965] kmodloader: done loading kernel modules from /etc/modules.d/*
[  457.162257] kmodloader: loading kernel modules from /etc/modules.d/*
[  457.174784] scsi host0: uas
[  457.178931] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for disabled endpoint or incorrect stream ring
[  457.188303] xhci-mtk 1e1c0000.xhci: @000000000fded170 0ee20000 00000000 05000000 01058001
[  457.196514] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for disabled endpoint or incorrect stream ring
[  457.205879] xhci-mtk 1e1c0000.xhci: @000000000fded180 0ee20100 00000000 05000000 01078001
[  464.441727] Data buffer not 16 bytes aligned: 8ee2c458
[  464.469820] Data buffer not 16 bytes aligned: 8ee2c0d8
[  464.477079] Data buffer not 16 bytes aligned: 8ee2c368
[  477.979944] scsi 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[  477.987509] scsi 0:0:0:0: tag#0 CDB: opcode=0x12 12 00 00 00 24 00
[  479.029938] scsi host0: uas_eh_bus_reset_handler FAILED to get lock err -16
[  479.036896] scsi 0:0:0:0: Device offlined - not ready after error recovery
[  479.044393] usbcore: registered new interface driver uas
[  479.050016] kmodloader: done loading kernel modules from /etc/modules.d/*
24.01.20181293Base systemBug ReportVery LowLowThe newest trunk source make ar9344 db120 reference boa...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on AR9344 DB120
- The newest version.
- Steps to reproduce

 

## Booting image at 9f680000 ...

 Image Name:   MIPS OpenWrt Linux-4.9.77
 Created:      2018-01-24   6:33:42 UTC
 Image Type:   MIPS Linux Kernel Image (lzma compressed)
 Data Size:    1379382 Bytes =  1.3 MB
 Load Address: 80060000
 Entry Point:  80060000
 Verifying Checksum at 0x9f680040 ...OK
 Uncompressing Kernel Image ... OK

No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 134217728

Starting kernel ...

[ 0.000000] Linux version 4.9.77 () (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r5935-c25d9cb) ) #0 Wed Jan 24 06:33:42 2018
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9344 rev 3
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),64k(mib0),64k(ART),6336k(rootfs.up),1408k(uImage.up),448k(rev) mem=128M rootfstype=squashfs noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 124872K/131072K available (3174K kernel code, 166K rwdata, 792K rodata, 276K init, 213K bss, 6200K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
[ 0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
[ 0.008310] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[ 0.081147] pid_max: default: 32768 minimum: 301
[ 0.086166] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.093213] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.103149] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.113657] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.120688] NET: Registered protocol family 16
[ 0.126898] MIPS: machine is Generic AR71XX/AR724X/AR913X based board
[ 0.149064] clocksource: Switched to clocksource MIPS
[ 0.155465] NET: Registered protocol family 2
[ 0.160930] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.168359] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.175173] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.182033] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.188261] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.195205] NET: Registered protocol family 1
[ 0.203762] Crashlog allocated RAM at address 0x3f00000
[ 0.210313] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.223987] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.230227] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 0.248339] io scheduler noop registered
[ 0.252559] io scheduler deadline registered (default)
[ 0.258371] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.265586] console [ttyS0] disabled
[ 0.289473] serial8250.0: ttyS0 at MMIO 0×18020000 (irq = 11, base_baud = 2500000) is a 16550A
[ 0.298657] console [ttyS0] enabled
[ 0.298657] console [ttyS0] enabled
[ 0.306083] bootconsole [early0] disabled
[ 0.306083] bootconsole [early0] disabled
[ 0.316280] libphy: Fixed MDIO Bus: probed
[ 0.323674] NET: Registered protocol family 10
[ 0.337759] NET: Registered protocol family 17
[ 0.342465] 8021q: 802.1Q VLAN Support v1.8
[ 0.349040] VFS: Cannot open root device “31:02” or unknown-block(31,2): error -6
[ 0.356677] Please append a correct “root=” boot option; here are the available partitions:
[ 0.365163] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)
[ 0.374233] Rebooting in 1 seconds..

19.01.20181284Base systemBug ReportVery LowLowuboot-kirkwood does not speak MMC on Pogoplug v4TrunkUnconfirmed Task Description

Testing on a Pogoplug V4 with the u-boot committed in f5d267df638d7adc6654f4a1a3d7c7557cafd759, there is no MMC support despite that 010-pogoplug_v4.patch includes kirkwood_mmc.c and friends. Boot messages are simply

U-Boot 2017.09 (Jan 19 2018 - 21:51:49 +0000)
Pogoplug V4

SoC:   Kirkwood 88F6281_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  128 MiB
MMC:   
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   egiga0
Error: egiga0 address not set.

On the other hand, the uboot shipped from https://forum.doozan.com/read.php?3,7477,7553 understands MMC. Its boot messages are

U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700)
Pogoplug V4

SoC:   Kirkwood 88F6192_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  128 MiB
MMC:   MVEBU_MMC: 0
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
18.01.20181282KernelBuild FailureVery LowLow"CONFIG_STRIP_KERNEL_EXPORTS" breaks kernel compilation...TrunkUnconfirmed Task Description

Target: brcm2708_bcm2710 (rpi-3)
Affected openwrt revision: git-head (26045049baf646aa2ce3dce78106da5acf4936ea)
(openwrt-17.01 is not affected)

  • Reproducing

git clone https://git.openwrt.org/openwrt/openwrt.git ; cd openwrt
make menuconfig
# Select:
# Target: Broadcom BCM27xx
# Subtarget: BCM2710 64 bit based boards
# Global build settings —> Strip unnecessary exports from the kernel image: Enabled
make -j 1 V=s

  • Build log
make -C /home/torte/openwrt/nfs/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-brcm2708_bcm2710/linux-4.9.76 HOSTCFLAGS="-O2 -I/home/torte/openwrt/nfs/openwrt/staging_dir/host/include  -Wall -Wmissing-prototypes -Wstrict-prototypes" CROSS_COMPILE="aarch64-openwrt-linux-musl-" ARCH="arm64" KBUILD_HAVE_NLS=no KBUILD_BUILD_USER="" KBUILD_BUILD_HOST="" KBUILD_BUILD_TIMESTAMP="Thu Jan 18 10:39:42 2018" KBUILD_BUILD_VERSION="0" HOST_LOADLIBES="-L/home/torte/openwrt/nfs/openwrt/staging_dir/host/lib" CONFIG_SHELL="bash" V=''  cmd_syscalls= KERNELRELEASE=4.9.76 EXTRA_LDSFLAGS="-I/home/torte/openwrt/nfs/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-brcm2708_bcm2710 -include symtab.h" CC="aarch64-openwrt-linux-musl-gcc" modules
make[5]: Entering directory '/home/torte/openwrt/nfs/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-brcm2708_bcm2710/linux-4.9.76'
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  CHK     include/generated/bounds.h
  CHK     include/generated/timeconst.h
  CHK     include/generated/asm-offsets.h
  CALL    scripts/checksyscalls.sh
  LDS     arch/arm64/kernel/vdso/vdso.lds
cc1: fatal error: symtab.h: No such file or directory
compilation terminated.
scripts/Makefile.build:405: recipe for target 'arch/arm64/kernel/vdso/vdso.lds' failed
make[6]: *** [arch/arm64/kernel/vdso/vdso.lds] Error 1
arch/arm64/Makefile:145: recipe for target 'vdso_prepare' failed
make[5]: *** [vdso_prepare] Error 2
  • Details

The option CONFIG_STRIP_KERNEL_EXPORTS adds “-include symtab.h” for all linker script invokations. See openwrt/include/kernel-defaults.mk:

ifdef CONFIG_STRIP_KERNEL_EXPORTS
  KERNEL_MAKEOPTS += \
        EXTRA_LDSFLAGS="-I$(KERNEL_BUILD_DIR) -include symtab.h"
endif

On recent kernels (4.9.x, arm64 build), linker scripts are used to generate “vdso.lds” at the “make modules” stage.
But the file “symtab.h” is generated later (at the install/image generation stage). See openwrt/include/kernel-build.mk:

  $(LINUX_DIR)/.image: $(STAMP_CONFIGURED) $(if $(CONFIG_STRIP_KERNEL_EXPORTS),$(KERNEL_BUILD_DIR)/symtab.h) FORCE
        $(Kernel/CompileImage)
        $(Kernel/CollectDebug)
        touch $$@

As a result, kernel compilation fails.

  • Sidenotes:

- 32bit arm (brcm2708_bcm2708) is not affected, the vdso stuff is generated by normal .c files

- On arm64 4.4 kernels, the vdso stuff is not compiled for reasons, that I don’t know. Anyway, openwrt-17.01 is not affected

02.01.20181252Base systemBug ReportVery LowLowNo IP Assigned to Interface with QMI on Quectel EC-25ATrunkAssigned Task Description

I’m attempting to use QMI on a GL.Inet MiFi equipped with a Quectel EC-25A cellular modem.

When I configure the interface using qmi I am able to connect to the cellular network at the radio layer, however my wwan0 interface is not assigned an IP address. Here’s my configuration from /etc/config/network:

  config interface 'modem'
          option proto 'qmi'
          option ifname 'wwan0'
          option device '/dev/cdc-wdm0'
          option country 'country11'
          option apn 'inet.bell.ca'

And some commands showing the device behaviour. You’ll note that raw_ip needs to be set to Y. I’ve integrated this [patch](https://github.com/bmork/LEDE/commit/10aed12fa587e818e4dc5d0db54545623fbe9b5f) to have qmi.sh set the raw_ip mode when required.

  root@OpenWrt:~# cat /sys/class/net/wwan0/qmi/raw_ip
  Y
  root@OpenWrt:~# ifup modem
  root@OpenWrt:~# uqmi -d /dev/cdc-wdm0 --get-data-status
  "connected"
  root@OpenWrt:~# uqmi -d /dev/cdc-wdm0 --get-current-settings
  {
      "pdp-type": "ipv4",
      "ip-family": "ipv4",
      "mtu": 1500,
      "ipv4": {
          "ip": "100.105.180.51",
          "dns1": "206.47.201.246",
          "dns2": "207.231.231.254",
          "gateway": "100.105.180.52",
          "subnet": "255.255.255.248"
      },
      "ipv6": {
          
      },
      "domain-names": {
          
      }
  }
  root@OpenWrt:~# ifconfig wwan0
  wwan0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
            inet6 addr: fe80::d789:480e:bfc8:2dac/64 Scope:Link
            UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
            RX packets:28 errors:0 dropped:0 overruns:0 frame:0
            TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000 
            RX bytes:5129 (5.0 KiB)  TX bytes:768 (768.0 B)

If I manually use the uqmi command to connect to the cellular network I can then drive the wwan0 interface using dhcp successfully. Here’s my /etc/config/network.

  config interface 'modem'
          option proto 'dhcp'
          option ifname 'wwan0'

And the resulting successful network connection:

  root@OpenWrt:~# ifup modem
  root@OpenWrt:~# ifconfig wwan0
  wwan0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
            inet addr:100.105.180.51  P-t-P:100.105.180.51  Mask:255.255.255.248
            inet6 addr: fe80::d789:480e:bfc8:2dac/64 Scope:Link
            UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
            RX packets:80 errors:0 dropped:0 overruns:0 frame:0
            TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000 
            RX bytes:24102 (23.5 KiB)  TX bytes:16842 (16.4 KiB)
  root@OpenWrt:~# ping -c 1 google.ca
  PING google.ca (172.217.1.163): 56 data bytes
  64 bytes from 172.217.1.163: seq=0 ttl=51 time=29.792 ms
  1. – google.ca ping statistics —

1 packets transmitted, 1 packets received, 0% packet loss

  round-trip min/avg/max = 29.792/29.792/29.792 ms

I believe that for some reason the dhcp client isn’t being run on the wwan0 interface by qmi.sh once it’s online but I’m not able to determine how this is supposed to work. I’m eager to address this issue and submit the resulting patches. Please let me know if you can help.

  root@OpenWrt:~# ping -c 1 8.8.8.8
  PING 8.8.8.8 (8.8.8.8): 56 data bytes
  64 bytes from 8.8.8.8: seq=0 ttl=54 time=31.805 ms
  1. – 8.8.8.8 ping statistics —

1 packets transmitted, 1 packets received, 0% packet loss

  round-trip min/avg/max = 31.805/31.805/31.805 ms
29.12.20171246Base systemBug ReportVery LowLowUbnt Nanostation Loco M2 - WDS link drops out after a f...TrunkUnconfirmed Task Description

Ubnt Nanostation Loco M2 - WDS link drops out after a few hours
I have a pair of Nanostation Loco M2 access points setup as a wireless bridge over a ~1300 foot (~400M) line of sight link.
I have had LEDE 17.01.3, 17.0.4 and OpenWrt SNAPSHOT r5499-575178e / LuCI Master (git-17.343.27587-8e6b1a6).

One is setup as a WDS AP and the other is setup as a WDS Client, after a few hours (4-12 hours?) the link drops out but still says that is connected (if I go to status it shows the other AP as connected but I cannot ping or do anything else across the link).
If I restart the wireless service on the client, the connection comes right back and all is well for a 4-12 hours.
Anyone have any suggestions on where to look? Below are the kernel and system logs for the time period in question:

AP Config files:
/etc/config/network:

config interface 'lan'
	option type 'bridge'
	option ifname 'eth0'
	option proto 'static'
	option netmask '255.255.255.0'
	option ipaddr 'x.x.x.2'
	option gateway 'x.x.x.1'
	option dns 'x.x.x.1'

/etc/config/wireless:

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11g'
	option path 'pci0000:00/0000:00:00.0'
	option channel '1'
	option country 'US'
	option htmode 'HT40'
	option distance '400'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'LAN_bridge'
	option wds '1'
	option key 'SECRET'
	option encryption 'psk2+tkip+ccmp'

Client Config files:
/etc/config/network:

config interface 'lan'
	option type 'bridge'
	option proto 'static'
	option netmask '255.255.255.0'
	option ipaddr 'x.x.x.3'
	option gateway 'x.x.x.1'
	option dns 'x.x.x.1'
	option _orig_ifname 'eth0'
	option _orig_bridge 'true'
	option ifname 'eth0'
	option delegate '0'

/etc/config/wireless:

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11g'
	option path 'pci0000:00/0000:00:00.0'
	option channel '1'
	option htmode 'HT40'
	option country 'US'
	option distance '400'

config wifi-iface
	option ssid 'LAN_bridge'
	option device 'radio0'
	option mode 'sta'
	option bssid 'AP_BSSID'
	option key 'SECRET'
	option wds '1'
	option network 'lan'
	option encryption 'psk2+tkip+ccmp'

AP Syslog:

Sun Nov 26 14:01:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:11:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:21:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:31:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:41:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 14:51:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:01:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:11:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:21:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
**Somewhere in here the link dropped out and I rebooted the client**
Sun Nov 26 15:28:14 2017 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED ClientMAC
Sun Nov 26 15:28:14 2017 kern.info kernel: [1893620.914221] device wlan0.sta1 left promiscuous mode
Sun Nov 26 15:28:14 2017 kern.info kernel: [1893620.919427] br-lan: port 3(wlan0.sta1) entered disabled state
Sun Nov 26 15:28:52 2017 daemon.info hostapd: wlan0: STA ClientMAC IEEE 802.11: authenticated
Sun Nov 26 15:28:52 2017 daemon.info hostapd: wlan0: STA ClientMAC IEEE 802.11: associated (aid 1)
Sun Nov 26 15:28:52 2017 kern.info kernel: [1893659.422460] device wlan0.sta1 entered promiscuous mode
Sun Nov 26 15:28:52 2017 kern.info kernel: [1893659.440920] br-lan: port 3(wlan0.sta1) entered forwarding state
Sun Nov 26 15:28:52 2017 kern.info kernel: [1893659.447086] br-lan: port 3(wlan0.sta1) entered forwarding state
Sun Nov 26 15:28:53 2017 daemon.notice hostapd: wlan0: AP-STA-CONNECTED ClientMAC
Sun Nov 26 15:28:53 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: pairwise key handshake completed (RSN)
Sun Nov 26 15:28:54 2017 kern.info kernel: [1893661.440359] br-lan: port 3(wlan0.sta1) entered forwarding state
Sun Nov 26 15:31:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)
Sun Nov 26 15:41:13 2017 daemon.info hostapd: wlan0: STA ClientMAC WPA: group key handshake completed (RSN)

AP Kernel Log:

[1649563.614654] br-lan: port 1(eth0) entered disabled state
[1649564.612365] eth0: link up (100Mbps/Full duplex)
[1649564.617165] br-lan: port 1(eth0) entered forwarding state
[1649564.622888] br-lan: port 1(eth0) entered forwarding state
[1649566.620738] br-lan: port 1(eth0) entered forwarding state
[1652624.237670] ------------[ cut here ]------------
[1652624.242540] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.254355] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.264049] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.328632] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.335791] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.335791] 	  ...
[1652624.371919] Call Trace:[<80071a8c>] 0x80071a8c
[1652624.376597] [<80071a8c>] 0x80071a8c
[1652624.380290] [<80081888>] 0x80081888
[1652624.383987] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.390133] [<800818e4>] 0x800818e4
[1652624.393854] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.399981] [<80260a14>] 0x80260a14
[1652624.403663] [<80260bf8>] 0x80260bf8
[1652624.407374] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652624.413800] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652624.419701] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652624.425575] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652624.431446] [<80084448>] 0x80084448
[1652624.435130] [<80083e04>] 0x80083e04
[1652624.438821] [<800a8014>] 0x800a8014
[1652624.442508] [<8006a990>] 0x8006a990
[1652624.446194] [<80060bf4>] 0x80060bf4
[1652624.449876] 
[1652624.451557] ---[ end trace 86b60d5fad42c0e7 ]---
[1652624.456661] ------------[ cut here ]------------
[1652624.461517] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.473297] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.482988] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.547552] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.554704] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.554704] 	  ...
[1652624.590833] Call Trace:[<80071a8c>] 0x80071a8c
[1652624.595502] [<80071a8c>] 0x80071a8c
[1652624.599197] [<80081888>] 0x80081888
[1652624.602893] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.609038] [<800818e4>] 0x800818e4
[1652624.612760] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.618896] [<80260a14>] 0x80260a14
[1652624.622578] [<80260bf8>] 0x80260bf8
[1652624.626277] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652624.632718] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652624.638615] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652624.644489] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652624.650366] [<80084448>] 0x80084448
[1652624.654046] [<80083e04>] 0x80083e04
[1652624.657738] [<800a8014>] 0x800a8014
[1652624.661423] [<8006a990>] 0x8006a990
[1652624.665109] [<80060bf4>] 0x80060bf4
[1652624.668791] 
[1652624.670471] ---[ end trace 86b60d5fad42c0e8 ]---
[1652624.675578] ------------[ cut here ]------------
[1652624.680433] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.692211] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.701903] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.766474] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.773641] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.773641] 	  ...
[1652624.809756] Call Trace:[<80071a8c>] 0x80071a8c
[1652624.814426] [<80071a8c>] 0x80071a8c
[1652624.818120] [<80081888>] 0x80081888
[1652624.821816] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.827961] [<800818e4>] 0x800818e4
[1652624.831683] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652624.837810] [<80260a14>] 0x80260a14
[1652624.841493] [<80260bf8>] 0x80260bf8
[1652624.845192] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652624.851632] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652624.857530] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652624.863403] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652624.869275] [<80084448>] 0x80084448
[1652624.872960] [<80083e04>] 0x80083e04
[1652624.876638] [<800a8014>] 0x800a8014
[1652624.880331] [<8006a990>] 0x8006a990
[1652624.884015] [<80060bf4>] 0x80060bf4
[1652624.887697] 
[1652624.889376] ---[ end trace 86b60d5fad42c0e9 ]---
[1652624.894482] ------------[ cut here ]------------
[1652624.899340] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 0x80da5cf0 [mac80211@80d80000+0x60780]()
[1652624.911125] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 113 (0x71)
[1652624.920817] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1652624.985380] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.4.89 #0
[1652624.992546] Stack : 803875b4 00000000 00000001 803e0000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[1652624.992546] 	  ...
[1652625.028662] Call Trace:[<80071a8c>] 0x80071a8c
[1652625.033331] [<80071a8c>] 0x80071a8c
[1652625.037027] [<80081888>] 0x80081888
[1652625.040722] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652625.046868] [<800818e4>] 0x800818e4
[1652625.050589] [<80da5cf0>] 0x80da5cf0 [mac80211@80d80000+0x60780]
[1652625.056714] [<80260a14>] 0x80260a14
[1652625.060410] [<80260bf8>] 0x80260bf8
[1652625.064115] [<80ce8388>] 0x80ce8388 [ath9k_common@80ce8000+0x4800]
[1652625.070555] [<80e677f4>] 0x80e677f4 [ath9k@80e60000+0x16650]
[1652625.076442] [<80e677d4>] 0x80e677d4 [ath9k@80e60000+0x16650]
[1652625.082330] [<80e64a44>] 0x80e64a44 [ath9k@80e60000+0x16650]
[1652625.088198] [<80084448>] 0x80084448
[1652625.091882] [<80083e04>] 0x80083e04
[1652625.095561] [<800a8014>] 0x800a8014
[1652625.099258] [<8006a990>] 0x8006a990
[1652625.102938] [<80060bf4>] 0x80060bf4
[1652625.106607] 
[1652625.108295] ---[ end trace 86b60d5fad42c0ea ]---
[1656961.531085] device wlan0.sta1 left promiscuous mode
[1656961.536375] br-lan: port 3(wlan0.sta1) entered disabled state
[1657000.400508] device wlan0.sta1 entered promiscuous mode
[1657000.416849] br-lan: port 3(wlan0.sta1) entered forwarding state
[1657000.423019] br-lan: port 3(wlan0.sta1) entered forwarding state
[1657002.415840] br-lan: port 3(wlan0.sta1) entered forwarding state
[1729152.802304] eth0: link down
[1729152.805769] br-lan: port 1(eth0) entered disabled state
[1729180.803335] eth0: link up (100Mbps/Full duplex)
[1729180.808173] br-lan: port 1(eth0) entered forwarding state
[1729180.813898] br-lan: port 1(eth0) entered forwarding state
[1729182.811672] br-lan: port 1(eth0) entered forwarding state
[1893620.914221] device wlan0.sta1 left promiscuous mode
[1893620.919427] br-lan: port 3(wlan0.sta1) entered disabled state
[1893659.422460] device wlan0.sta1 entered promiscuous mode
[1893659.440920] br-lan: port 3(wlan0.sta1) entered forwarding state
[1893659.447086] br-lan: port 3(wlan0.sta1) entered forwarding state
[1893661.440359] br-lan: port 3(wlan0.sta1) entered forwarding state
[1894771.793057] device wlan0.sta1 left promiscuous mode
[1894771.798391] br-lan: port 3(wlan0.sta1) entered disabled state
[1894777.535302] device wlan0.sta1 entered promiscuous mode
[1894777.547462] br-lan: port 3(wlan0.sta1) entered forwarding state
[1894777.553631] br-lan: port 3(wlan0.sta1) entered forwarding state
[1894779.546485] br-lan: port 3(wlan0.sta1) entered forwarding state
[1895148.287966] device wlan0.sta1 left promiscuous mode
[1895148.293178] br-lan: port 3(wlan0.sta1) entered disabled state
[1895148.349721] device wlan0 left promiscuous mode
[1895148.354492] br-lan: port 2(wlan0) entered disabled state
[1895150.539163] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1895150.663905] device wlan0 entered promiscuous mode
[1895153.075046] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[1895153.081886] br-lan: port 2(wlan0) entered forwarding state
[1895153.087660] br-lan: port 2(wlan0) entered forwarding state
[1895154.299110] device wlan0.sta1 entered promiscuous mode
[1895154.316512] br-lan: port 3(wlan0.sta1) entered forwarding state
[1895154.322716] br-lan: port 3(wlan0.sta1) entered forwarding state
[1895155.086003] br-lan: port 2(wlan0) entered forwarding state
[1895156.315941] br-lan: port 3(wlan0.sta1) entered forwarding state

Thanks in advance

Aaron Z


22.12.20171239PackagesBug ReportVery LowLowuhttpd package comes with /etc/config/uhttpd file that ...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of LEDE release, packages, etc.
- Steps to reproduce

root@OpenWRT:~# cat /etc/openwrt_release
DISTRIB_ID=’OpenWrt’ DISTRIB_RELEASE=’SNAPSHOT’ DISTRIB_REVISION=’r5601-efa22b1’ DISTRIB_TARGET=’ar71xx/generic’ DISTRIB_ARCH=’mips_24kc’ DISTRIB_DESCRIPTION=’OpenWrt SNAPSHOT r5601-efa22b1’ DISTRIB_TAINTS=’’ root@OpenWRT:~# cat /etc/board.json
{

"model": {
	"id": "tl-wdr4300",
	"name": "TP-Link TL-WDR3600 v1"
},

...

to reproduce:
- install lede
- run lua/luci, modify configuration somehow and save, so that /etc/config/uhttpd is overwritten
- flash corresponding sysupgrade.bin with “[x] keepsettings” - ssh root@OpenWRT.localnet opkg update
- ssh root@OpenWRT.localnet opkg install luci-ssl strace snmpd snmp-mibs lsof rsyslog diffutils vim less

note in output:

Collected errors:
* resolve_conffiles: Existing conffile /etc/config/uhttpd is different from the conffile in the new package. The new conffile will be placed at /etc/config/uhttpd-opkg.
* resolve_conffiles: Existing conffile /etc/config/luci is different from the conffile in the new package. The new conffile will be placed at /etc/config/luci-opkg.

The contents of uhttpd-opkg and uhttpd are quite the same, the lua/luci version being without comments and with ‘quoted’ values (see attached file).

A resolution of “wont fix” would be absolutely acceptable.

Kind regards,
Dominik

21.12.20171237OtherBug ReportVery LowLowsnmpd does not report connected clients correctlyTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of LEDE release, packages, etc.
- Steps to reproduce

 

The commonly used OID 1.3.6.1.2.1.4.22.1.2 does not report a complete list of clients.

Using snmpd 5.7.3-3 on LEDE 17.01.04, ssh in and display a list of connected clients with iwinfo wlan0 assoclist. To query via SNMP from another machine, use snmpwalk -v2c 172.24.32.15 1.3.6.1.2.1.4.22.1.2

mini-snmpd and mini_snmpd both seem to be unavailable as alternatives.

10.12.20171216Base systemFeature RequestVery LowLowkmod-mwlwifi: Driver update to support 802.11r FTTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: WRT1900AC + WRT1900ACS
- Software versions of LEDE release, packages, etc.: TRUNK

Commit 760f7bf1b8af6c899ccb14d47e8b987ed9a62adf on Nov 6th updated the mwlwifi driver to accept and MDIE Beacon parameter from hostapd. I have compiled this version in the 17.01.4 SDK and been running for roughly a month with no issues. Please update the firmware for the next release, if possible.

https://github.com/kaloz/mwlwifi/commit/760f7bf1b8af6c899ccb14d47e8b987ed9a62adf

If there is anything I can provide to help out, please let know!

25.11.20171190Base systemFeature RequestVery LowLowNETGEAR WNDR3800 USB LED trigger not work properly!TrunkAssigned Task Description

When I plug USB device in USB port, USB is working。I can copy data to usb device. The USB LED show green。But when the data is copying to usb device, the usb led do not blink, just is always green. I select usb trigger and select usbport hub1 and port1. It does not blink too. It means trigger dont work.

model: NETGEAR WNDR3800
Firmware Version LEDE Reboot SNAPSHOT r5420-332438b / LuCI Master (git-17.328.04231-802d5b6)
Kernel Version 4.9.63

By the way, my device work properly in 15.05.1 and 14.07. When I flash LEGE, it have been found this problem.

22.11.20171183KernelFeature RequestVery LowLowAdd congestion control for low priority flowsAllUnconfirmed Task Description

Hello,

It would be nice to include package for alternative congestion control mechanisms.

Especially some application can use tcp_lp (low priroriry) to optimise traffic.
Seems a start altought i need to document myself a bit more concerning ledbat state on linux.

Cedric


18.11.20171176Base systemBug ReportVery LowLowthermal thermal_zone0: failed to read out thermal zone ...TrunkUnconfirmed Task Description

Supply the following if possible:

- Device problem occurs on

     TP-Link Archer C2600 v1.0 - https://lede-project.org/toh/hwdata/tp-link/tp-link_archer_c2600

- Software versions of LEDE release, packages, etc.

     LEDE Reboot 17.01.4 r3560-79f57e422d / LuCI lede-17.01 branch (git-17.315.61305-a9bddc4)
     Kernel Version	4.4.92

- Steps to reproduce: N/A

 

Error regarding thermal within kernel log: 56757.023342] thermal thermal_zone0: failed to read out thermal zone (-110)

Appears this issue had a patch supplied in 2015? https://patchwork.kernel.org/patch/5978221/

On Tue, Mar 10, 2015 at 04:06:46PM +0100, Hans de Goede wrote:
> Some temperature sensors only get updated every few seconds and while
> waiting for the first irq reporting a (new) temperature to happen there
> get_temp operand will return -EAGAIN as it does not have any data to report
> yet.
>
> Not logging an error in this case avoids messages like these from showing
> up in dmesg on affected systems:
>
> [ 1.219353] thermal thermal_zone0: failed to read out thermal zone 0
> [ 2.015433] thermal thermal_zone0: failed to read out thermal zone 0
> [ 2.416737] thermal thermal_zone0: failed to read out thermal zone 0
>
> Signed-off-by: Hans de Goede hdegoede@redhat.com

11.11.20171162Base systemBug ReportVery LowLowwpa_supplicant dead loop in fuction wpas_ctrl_msg_queue...TrunkUnconfirmed Task Description

lede-17.01
https://github.com/lede-project/source.git 4c3953ba291abfb1d28b1452b6e519367bf4f242

db120

I am test ath9k Stability. And after 1 day. wpa_supplicant MSG_DUMP loop:

daemon.debug wpa_supplicant[9844]: CTRL: Had to throttle pending event message transmission for (sock 18 gsock -1)

I have two clients device connect ap. Both two clients all report this log. But ap have no any info. And restart wpa_supplicant with wifi. Log is missing.

04.11.20171144Base systemBug ReportVery LowLowOpkg fails with Out of memory on a TP-Link RE450TrunkUnconfirmed Task Description

Hi!

I a problem on my TPLINK RE450 on upgrading of packages. I’m restarting the system and the upgrade is still not possible, console output:

BusyBox v1.25.1 () built-in shell (ash)

     _________
    /        /\      _    ___ ___  ___
   /  LE    /  \    | |  | __|   \| __|
  /    DE  /    \   | |__| _|| |) | _|
 /________/  LE  \  |____|___|___/|___|                      lede-project.org
 \        \   DE /
  \    LE  \    /  -----------------------------------------------------------
   \  DE    \  /    Reboot (17.01.4, r3560-79f57e422d)
    \________\/    -----------------------------------------------------------

root@LEDE:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root                 2560      2560         0 100% /rom
tmpfs                    30332        80     30252   0% /tmp
/dev/mtdblock3            2176       236      1940  11% /overlay
overlayfs:/overlay        2176       236      1940  11% /
tmpfs                      512         0       512   0% /dev
root@LEDE:~# free
             total       used       free     shared    buffers     cached
Mem:         60664      43600      17064         80       2320       6048
-/+ buffers/cache:      35232      25432
Swap:            0          0          0
root@LEDE:~# opkg update
Downloading http://downloads.lede-project.org/releases/17.01.4/targets/ar71xx/generic/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_core
Downloading http://downloads.lede-project.org/releases/17.01.4/targets/ar71xx/generic/packages/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/base/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_base
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/base/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/luci/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_luci
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/luci/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_packages
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/packages/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/routing/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_routing
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/routing/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/telephony/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_telephony
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/telephony/Packages.sig
Signature check passed.
root@LEDE:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root                 2560      2560         0 100% /rom
tmpfs                    30332       568     29764   2% /tmp
/dev/mtdblock3            2176       236      1940  11% /overlay
overlayfs:/overlay        2176       236      1940  11% /
tmpfs                      512         0       512   0% /dev
root@LEDE:~# free
             total       used       free     shared    buffers     cached
Mem:         60664      44804      15860        568       2320       6756
-/+ buffers/cache:      35728      24936
Swap:            0          0          0
root@LEDE:~# opkg list upgradable
root@LEDE:~# opkg list-upgradable
luci-lib-ip - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-theme-bootstrap - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
dnsmasq - 2.78-1 - 2.78-2
luci-app-firewall - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-proto-ppp - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-mod-admin-full - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-base - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-proto-ipv6 - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-lib-nixio - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci-lib-jsonc - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
luci - git-17.290.79498-d3f0685-1 - git-17.298.45605-07e7ff0-1
root@LEDE:~# opkg upgrade luci-base
Upgrading luci-base on root from git-17.290.79498-d3f0685-1 to git-17.298.45605-07e7ff0-1...
Downloading http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/luci/luci-base_git-17.298.45605-07e7ff0-1_mips_24kc.ipk
Collected errors:
 * xsystem: wget: vfork: Out of memory.
 * opkg_download: Failed to download http://downloads.lede-project.org/releases/17.01.4/packages/mips_24kc/luci/luci-base_git-17.298.45605-07e7ff0-1_mips_24kc.ipk, wget returned -1.
 * opkg_install_pkg: Failed to download luci-base. Perhaps you need to run 'opkg update'?
root@LEDE:~#

It looks like there is enough memory availible, where is the problem? Can someone explain it? With a sysctl -w vm.min_free_kbytes=0 the upgrade is possible.


01.11.20171137PackagesBug ReportVery LowLowdnsmasq static hosts configuration should support clien...TrunkUnconfirmed Task Description

By design, dnsmasq does not assume that two requests from the same source MAC address are for the same client if their client-id is different. Put another way, the requester is effectively identified by a <MAC,client-id> pair. This is discussed in the dnsmasq FAQ http://www.thekelleys.org.uk/dnsmasq/docs/FAQ under the question “I’m network booting my machines, and trying to give them static DHCP-assigned addresses...”

As a result, a machine that has been assigned a static address, which first requests an IP address without sending a client-id, and later makes a request with a client-id, will not be given the assigned static IP in response to the subsequent request. (The static IP will bind to the initial <MAC,client-id> pair with the null client-ID.)

To resolve this, one of the following options could be implemented:

  1. Mention the problem in the documentation, and advise the user to append “,id:*” to the MAC address if they run into this issue. (This will cause issues for luci users because this will be considered a malformed MAC address, and luci will refuse to save changes.)
  2. The dnsmasq init script could always insert “,id:*” immediately after the mac address on the generated dhcp-host configuration line.
  3. The dhcp.host entry could be extended with an “allow-any-client-id” or “ignore-client-id” boolean, which, if selected, would cause “,id:*” to be inserted as above.
  4. The dhcp.host entry could be extended with an optional “client-id” field, which would allow an explicit DHCP client-id to be set for the host. That ID could be used instead of or in addition to the existing “mac” entry. Semantics would need to be defined to make sure that the handling is well-defined.

Whichever option is chosen, the documentation should be updated. If an entry is added to the dhcp.host schema, bugs should be filed on other DHCP server packages (e.g.: isc-dhcp-server-ipv4) so that they can also implement the new functionality.

31.10.20171130Base systemBug ReportVery LowLowAdd partial import for settingsTrunkUnconfirmed Task Description

Sometimes it’s very necessary feature. For example after upgrade from OpenWRT to LEDE my router works fine with default settings. But after import my configuration, DNS and DHCP IPv4 not working at all. And it’s hard to determinite what settings responsible for this, because you can only import all or nothing. I suggest add dialog with checkboxes to import configuration process.

24.10.20171110Base systemBug ReportVery LowLowWifi unusable on HG556a using current trunkTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: Huawei ECHOLIFE HG556a Type B
- Software versions of LEDE release, packages, etc: Current Trunk - Powered by LuCI Master (git-17.294.24601-59a4e40) / LEDE Reboot SNAPSHOT r5122-f7a6fd3153

- Steps to reproduce: reboot

I did an update to trunk and made a lede build for the HG556a type B the other day. I have two of these HG556a type B routers both configured as wireless repeaters. I made no changes to the config, I simply wanted the latest security patches installed on my wifi repeaters. The first HG556a connects to a WWAN router that broadcasts 802.11n only, the other WWAN router broadcasts legacy wifi modes and 802.11n. The first works perfectly. The second throws up numerous errors in syslog from boot time, reboot every few hours and repeatedly disconnects from clients and the WWAN router. See syslog below:

Powered by LuCI Master (git-17.294.24601-59a4e40) / LEDE Reboot SNAPSHOT r5122-f7a6fd3153

Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.596484] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.604568] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.604568] 80543fac 00000000 00000004 81f73908 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.604568] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.604568] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.604568] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.604568] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.641077] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.643652] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.648182] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.653588] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.659056] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.665646] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.671458] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.676979] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.683219] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.690367]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.691843] —[ end trace 0902623f520cb0c7 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.698309] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.703376] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.715140] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19932.858376] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.866468] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.866468] 80543fac 00000000 00000004 81f76648 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.866468] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.866468] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.866468] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.866468] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.902968] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.905544] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.910072] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.915479] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.920933] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.927490] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.933304] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.938829] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.945064] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.952230]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.953769] —[ end trace 0902623f520cb0c8 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.958850] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.963902] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19932.975678] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19933.118913] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.126999] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.126999] 80543fac 00000000 00000004 81f76b18 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.126999] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.126999] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.126999] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.126999] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.163508] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.166083] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.170613] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.176018] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.181482] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.188060] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.193877] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.199401] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.205641] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.212796]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.214330] —[ end trace 0902623f520cb0c9 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.219582] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.224643] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.236421] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19933.379658] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.387752] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.387752] 80543fac 00000000 00000004 81e79bc8 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.387752] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.387752] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.387752] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.387752] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.424254] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.426828] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.431359] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.436764] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.442218] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.448774] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.454587] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.460111] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.466350] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.473507]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.474982] —[ end trace 0902623f520cb0ca ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.480524] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.485601] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.497400] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19933.640637] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.648719] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.648719] 80543fac 00000000 00000004 82f334e8 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.648719] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.648719] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.648719] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.648719] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.685231] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.687807] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.692346] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.697751] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.703222] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.709776] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.715590] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.721115] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.727354] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.734503]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.735978] —[ end trace 0902623f520cb0cb ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.741140] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.746190] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.757949] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19933.901184] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.909277] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.909277] 80543fac 00000000 00000004 82f822d8 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.909277] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.909277] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.909277] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.909277] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.945779] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.948307] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.952874] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.958280] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.963731] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.970280] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.976092] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.981608] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.987845] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.994995]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19933.996472] —[ end trace 0902623f520cb0cc ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.001802] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.006851] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.018628] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19934.161867] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.169949] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.169949] 80543fac 00000000 00000004 82f82a68 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.169949] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.169949] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.169949] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.169949] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.206460] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.208989] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.213559] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.218963] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.224427] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.230982] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.236793] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.242310] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.248546] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.255694]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.257173] —[ end trace 0902623f520cb0cd ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.263788] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.268875] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.280640] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19934.423875] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.431969] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.431969] 80543fac 00000000 00000004 82f85598 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.431969] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.431969] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.431969] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.431969] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.468470] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.471043] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.475571] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.480985] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.486443] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.492998] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.498812] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.504334] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.510574] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.517723]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.519198] —[ end trace 0902623f520cb0ce ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.524808] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.529872] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.541651] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19934.684889] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.692972] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.692972] 80543fac 00000000 00000004 832f2f38 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.692972] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.692972] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.692972] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.692972] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.729518] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.732012] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.736580] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.741986] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.747459] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.754014] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.759824] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.765340] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.771598] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.778745]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.780221] —[ end trace 0902623f520cb0cf ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.785086] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.790094] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.801851] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19934.945087] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.953182] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.953182] 80543fac 00000000 00000004 82face88 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.953182] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.953182] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.953182] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.953182] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.989682] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.992210] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19934.996777] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.002184] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.007645] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.014194] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.020006] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.025529] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.031769] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.038926]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.040402] —[ end trace 0902623f520cb0d0 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.045585] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.050620] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.062398] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19935.205636] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.213720] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.213720] 80543fac 00000000 00000004 82facbc8 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.213720] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.213720] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.213720] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.213720] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.250228] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.252758] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.257326] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.262734] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.268204] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.274764] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.280582] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.286105] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.292342] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.299491]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.300968] —[ end trace 0902623f520cb0d1 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.306459] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.311521] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.323280] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19935.466515] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.474607] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.474607] 80543fac 00000000 00000004 82e5fc78 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.474607] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.474607] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.474607] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.474607] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.511109] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.513687] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.518223] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.523627] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.529085] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.535639] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.541450] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.546964] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.553203] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.560352]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.561886] —[ end trace 0902623f520cb0d2 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.566864] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.571907] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.583683] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19935.726919] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.735002] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.735002] 80543fac 00000000 00000004 81cb0438 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.735002] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.735002] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.735002] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.735002] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.771513] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.774086] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.778616] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.784025] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.789498] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.796088] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.801901] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.807424] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.813664] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.820820]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.822353] —[ end trace 0902623f520cb0d3 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.827454] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.832505] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.844268] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19935.987502] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.995596] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.995596] 80543fac 00000000 00000004 82ea0388 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.995596] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.995596] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.995596] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19935.995596] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.032096] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.034672] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.039202] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.044605] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.050060] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.056609] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.062421] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.067946] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.074183] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.081379]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.082854] —[ end trace 0902623f520cb0d4 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.088001] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.093055] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.104833] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19936.248068] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.256152] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.256152] 80543fac 00000000 00000004 81f19178 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.256152] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.256152] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.256152] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.256152] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.292662] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.295236] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.299769] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.305173] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.310640] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.317193] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.323006] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.328528] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.334767] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.341917]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.343392] —[ end trace 0902623f520cb0d5 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.348255] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.353264] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.365024] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19936.508257] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.516351] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.516351] 80543fac 00000000 00000004 81f19388 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.516351] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.516351] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.516351] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.516351] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.552851] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.555426] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.559954] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.565385] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.570846] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.577439] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.583234] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.588753] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.594994] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.602141]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.603617] —[ end trace 0902623f520cb0d6 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.608659] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.613702] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.625478] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19936.768715] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.776800] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.776800] 80543fac 00000000 00000004 82ea09b8 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.776800] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.776800] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.776800] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.776800] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.813310] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.815844] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.820406] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.825814] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.831286] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.837839] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.843652] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.849166] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.855406] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.862554]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.864030] —[ end trace 0902623f520cb0d7 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.869073] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.874115] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19936.885876] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19937.029111] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.037203] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.037203] 80543fac 00000000 00000004 81f19908 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.037203] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.037203] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.037203] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.037203] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.073706] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.076235] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.080803] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.086208] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.091662] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.098218] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.104028] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.109546] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.115783] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.122932]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.124408] —[ end trace 0902623f520cb0d8 ]— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.129917] ————[ cut here ]———— Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.134978] WARNING: CPU: 0 PID: 1399 at backports-2017-10-06/net/mac80211/rx.c:629 ieee80211_rx_napi+0×240/0x97c [mac80211]()
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.146753] Modules linked in: ath9k ath9k_htc ath9k_common pppoe ppp_async option cdc_mbim ath9k_hw ath usb_wwan rndis_host qmi_wwan pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_cTue Oct 24 13:08:04 2017 kern.warn kernel: [19937.289992] CPU: 0 PID: 1399 Comm: wpa_supplicant Tainted: G W 4.4.93 #0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.298075] Stack : 80546d42 00000049 00000000 803f0000 82f116a4 803e6da3 80372ae0 00000577
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.298075] 80543fac 00000000 00000004 82e2f858 00000000 800594cc 8037d094 803e0000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.298075] 00000000 00000000 8037b4a0 82f0f8d4 00000000 800573d0 80546d42 00000072
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.298075] 803e5e50 801bdc00 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.298075] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.298075] ...
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.334586] Call Trace:
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.337114] [<80024f84>] show_stack+0×54/0×88 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.341682] [<80032f00>] warn_slowpath_common+0xa0/0xd0
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.347086] [<80032fb8>] warn_slowpath_null+0×18/0×24 Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.352552] [<82c262e4>] ieee80211_rx_napi+0×240/0x97c [mac80211]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.359107] [<832c7260>] ath_rx_tasklet+0xc24/0xc88 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.364916] [<832c733c>] ath_stoprecv+0×78/0xf34 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.370434] [<832c3230>] ath9k_deinit_device+0x6d0/0×944 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.376670] [<832c503c>] ath9k_calculate_summary_state+0×500/0×600 [ath9k]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.383819]
Tue Oct 24 13:08:04 2017 kern.warn kernel: [19937.385297] —[ end trace 0902623f520cb0d9 ]— Tue Oct 24 13:08:04 2017 daemon.info odhcpd[914]: Using a RA lifetime of 0 seconds on br-lan
Tue Oct 24 13:08:04 2017 daemon.notice hostapd: nl80211: nl80211_recv_beacons→nl_recvmsgs failed: -5
Tue Oct 24 13:10:24 2017 daemon.info hostapd: wlan0-1: STA f0:25:b7:b2:fe:ea IEEE 802.11: authenticated
Tue Oct 24 13:10:24 2017 daemon.info hostapd: wlan0-1: STA f0:25:b7:b2:fe:ea IEEE 802.11: associated (aid 1)
Tue Oct 24 13:10:24 2017 daemon.notice hostapd: wlan0-1: AP-STA-CONNECTED f0:25:b7:b2:fe:ea
Tue Oct 24 13:10:24 2017 daemon.info hostapd: wlan0-1: STA f0:25:b7:b2:fe:ea RADIUS: starting accounting session 747735F6C298AD3B
Tue Oct 24 13:10:24 2017 daemon.info hostapd: wlan0-1: STA f0:25:b7:b2:fe:ea WPA: pairwise key handshake completed (RSN)
Tue Oct 24 13:10:24 2017 daemon.info dnsmasq-dhcp[2988]: DHCPDISCOVER(br-lan) f0:25:b7:b2:fe:ea

 


23.10.20171105Base systemBug ReportVery LowLowtp-link wr840n v4 - wifi disabled when channel is set t...TrunkUnconfirmed Task Description

When I set the wifi channel to ‘auto’, on a tp-link wr840n v4, the wifi interface seems to get disabled.

I’m using “Reboot SNAPSHOT r5122-f7a6fd3”.

If I fix some channel (1 to 11), the wifi connection works normaly.

 


21.10.20171093KernelBug ReportVery LowLowmac80211, PKG_VERSION:=2017-10-06 - kernel.warnTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
Asus RT-AC58U
- Software versions of LEDE release, packages, etc.
Trunk , custom build
- Steps to reproduce
Just use it with 5GHz wlan.

[  394.848355] ------------[ cut here ]------------
[  394.848609] WARNING: CPU: 0 PID: 1294 at backports-2017-10-06/net/wireless/util.c:1143 cfg80211_calculate_bitrate+0x14c/0x1f4 [cfg80211]
[  394.852222] invalid rate bw=2, mcs=6, nss=1
[  394.864381] Modules linked in: pppoe nf_conntrack_ipv6 l2tp_ppp iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT pptp pppox ppp_mppe ppp_async nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt fuse ath10k_pci ath10k_core ath mac80211 cfg80211 compat ledtrig_usbport ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables pppoatm ppp_generic slhc ip_gre gre l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel ip_tunnel tun vfat fat cifs br2684 atm nls_utf8 nls_iso8859_1 nls_cp437
[  394.938351]  sha1_generic md5 md4 cmac usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qca_baldur phy_qca_uniphy phy_qcom_dwc3 ahci ehci_platform sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug ext4 jbd2 mbcache exfat crc32c_generic
[  394.966584] CPU: 0 PID: 1294 Comm: luci Not tainted 4.9.57 #0
[  394.966833] Hardware name: Generic DT based system
[  394.972631] [<c0215670>] (unwind_backtrace) from [<c0211f1c>] (show_stack+0x10/0x14)
[  394.977298] [<c0211f1c>] (show_stack) from [<c0398708>] (dump_stack+0x7c/0x9c)
[  394.985193] [<c0398708>] (dump_stack) from [<c021d864>] (__warn+0xbc/0xec)
[  394.992222] [<c021d864>] (__warn) from [<c021d8c8>] (warn_slowpath_fmt+0x34/0x44)
[  394.999190] [<c021d8c8>] (warn_slowpath_fmt) from [<bf246f98>] (cfg80211_calculate_bitrate+0x14c/0x1f4 [cfg80211])
[  395.006862] [<bf246f98>] (cfg80211_calculate_bitrate [cfg80211]) from [<bf26b52c>] (nl80211_put_sta_rate+0x48/0x1dc [cfg80211])
[  395.017082] [<bf26b52c>] (nl80211_put_sta_rate [cfg80211]) from [<bf25928c>] (nl80211_set_interface+0x6c0/0xd38 [cfg80211])
[  395.028433] [<bf25928c>] (nl80211_set_interface [cfg80211]) from [<bf25e64c>] (nl80211_dump_station+0xec/0x110 [cfg80211])
[  395.039467] [<bf25e64c>] (nl80211_dump_station [cfg80211]) from [<c0528250>] (genl_lock_dumpit+0x24/0x34)
[  395.050481] [<c0528250>] (genl_lock_dumpit) from [<c0525eb0>] (netlink_dump+0xe0/0x250)
[  395.060108] [<c0525eb0>] (netlink_dump) from [<c05263f0>] (__netlink_dump_start+0xdc/0x184)
[  395.067922] [<c05263f0>] (__netlink_dump_start) from [<c0528aec>] (genl_rcv_msg+0x154/0x310)
[  395.076256] [<c0528aec>] (genl_rcv_msg) from [<c0527fbc>] (netlink_rcv_skb+0x58/0xb4)
[  395.084933] [<c0527fbc>] (netlink_rcv_skb) from [<c0528984>] (genl_rcv+0x20/0x34)
[  395.092657] [<c0528984>] (genl_rcv) from [<c05279c0>] (netlink_unicast+0x138/0x1fc)
[  395.100126] [<c05279c0>] (netlink_unicast) from [<c0527e2c>] (netlink_sendmsg+0x2f0/0x310)
[  395.107591] [<c0527e2c>] (netlink_sendmsg) from [<c04e4400>] (sock_sendmsg+0x14/0x24)
[  395.115922] [<c04e4400>] (sock_sendmsg) from [<c04e4990>] (___sys_sendmsg+0x184/0x228)
[  395.123822] [<c04e4990>] (___sys_sendmsg) from [<c04e5728>] (__sys_sendmsg+0x40/0x64)
[  395.131635] [<c04e5728>] (__sys_sendmsg) from [<c020ebc0>] (ret_fast_syscall+0x0/0x3c)
[  395.139886] ---[ end trace 30f0f2b80040b4a7 ]---
 


20.10.20171091PackagesBuild FailureVery LowLowlibiconv-full undefined reference compile-time linking ...TrunkUnconfirmed Task Description

LEDE Trunk using latest commit fbde9ac718409720a937671f3354837223b5db76
Feeds all using latest trunk sources, though that shouldn't affect this
Target is "x86" Generic (also tried x86_64)
Selected GCC 7 for compiler options
.config is attached

Problem discovered when enabling the 'minidlna' package, which has a dependency on 'libiconv-full' - a core LEDE package.

Compilation fails on 'libiconv-full' with undefined reference errors (linking errors) for objects 'aliases_lookup' and 'aliases2_lookup' in "libiconv.so":

make[5]: Entering directory '/home/jstaehle/prem2/depot/lede/build_dir/target-i386_pentium4_musl/libiconv-1.11.1/src'
/bin/sh ../libtool --mode=link i486-openwrt-linux-musl-gcc -L/home/jstaehle/prem2/depot/lede/staging_dir/target-i386_pentium4_musl/usr/lib -L/home/jstaehle/prem2/depot/lede/staging_dir/target-i386_pentium4_musl/lib -L/home/jstaehle/prem2/depot/lede/staging_dir/toolchain-i386_pentium4_gcc-7.2.0_musl/usr/lib -L/home/jstaehle/prem2/depot/lede/staging_dir/toolchain-i386_pentium4_gcc-7.2.0_musl/lib -znow -zrelro  iconv_no_i18n.o ../srclib/libicrt.a ../lib/libiconv.la -o iconv_no_i18n
i486-openwrt-linux-musl-gcc -znow -zrelro iconv_no_i18n.o -o iconv_no_i18n  -L/home/jstaehle/prem2/depot/lede/staging_dir/target-i386_pentium4_musl/usr/lib -L/home/jstaehle/prem2/depot/lede/staging_dir/target-i386_pentium4_musl/lib -L/home/jstaehle/prem2/depot/lede/staging_dir/toolchain-i386_pentium4_gcc-7.2.0_musl/usr/lib -L/home/jstaehle/prem2/depot/lede/staging_dir/toolchain-i386_pentium4_gcc-7.2.0_musl/lib ../srclib/libicrt.a ../lib/.libs/libiconv.so -Wl,--rpath -Wl,/home/jstaehle/prem2/depot/lede/build_dir/target-i386_pentium4_musl/libiconv-1.11.1/lib/.libs
../lib/.libs/libiconv.so: undefined reference to `aliases_lookup'
../lib/.libs/libiconv.so: undefined reference to `aliases2_lookup'
collect2: error: ld returned 1 exit status
Makefile:64: recipe for target 'iconv_no_i18n' failed
make[5]: *** [iconv_no_i18n] Error 1

Full build log is also attached

Tested with a full default configuration and only options enabled being GCC 7 and a modular option for the libiconv-full package, so that should rule out any external influence.

I did find one other reference to this issue on the LEDE forums a few months ago here: LEDE Forums: compilation fails on libiconv-full

17.10.20171071Base systemBug ReportVery LowLowSysupgrade fails when kernel console is disabledTrunkUnconfirmed Task Description

Hardware used:
- Gateworks Ventana imx6 board (GW5200)

Synopsis:

Running sysupgrade with a valid image fails if the kernel console is disabled in u-boot (setenv console ; saveenv; reset)
As soon as sysupgrade starts, the board reboots immediately.

The detected reboot reason displayed is exactly the same in both cases.

Reset cause: WDOG
WDOG1 Reset cause: SFTW
WDOG2 Reset cause: POR

Basically:
- Kernel console enabled (console = ttymxc1) –> sysupgrade runs normally and succeeds
- Kernel console disabled (console = ) –> The board reboots within 1 second as soon as sysupgrade starts

Rationale for disabling kernel console:

- This board exposes 2 UART ports for user applications (ttymxc0, ttymxc1)
- ttymxc1 is shared with the kernel console and needs to be disabled so it does not interfere with the peripheral communication
- Both ports are used in my case (ttymxc0: GPS received ; ttymxc1: Iridium modem)

16.10.20171067Base systemBug ReportVery LowLowmisleading output from busybox nslookup applet (lede va...TrunkUnconfirmed Task Description

LEDE_BOARD=”bcm53xx/generic” LEDE_ARCH=”arm_cortex-a9” LEDE_TAINTS=”no-all busybox” LEDE_RELEASE=”LEDE Reboot SNAPSHOT r5032-9e9696a”

Description: where no query type is provided to nslookup busybox applet, nslookup assumes A + AAAA queries (if the domain argument cannot be converted into a ptr). Then, if the A query succeeds but AAAA fails (for example, no record for an IPv6 address for the given hostname), nslookup returns “Can’t find hostname: No answer”. The “no answer” response looks puzzling. One has to review the the nslookup applet’s source code to understand that there is nothing wrong with the DNS server.

For example:

root@LEDE:~# nslookup cam1 localhost
Server:		localhost
Address:	::1#53

Name:      cam1
Address 1: 192.168.21.14
*** Can't find cam1: No answer

Suggested fix: either add type information in the response, like “type A: X.X.X.X, type AAAA: can’t find hostname: no answer”, or omit the AAAA response if only A record is found.

16.10.20171064Base systemBug ReportVery LowLowWXR-1900DHP Problems with 17.01.2 and 17.01.3 (BCM53xx)TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
Buffalo WXR-1900DHP

- Software versions of LEDE release, packages, etc.
Stable Release 17.01.2 and 17.01.3 both partially functional. (17.01.01 works well, except wifi)
lede-17.01.2-bcm53xx-buffalo-wxr-1900dhp-squashfs.trx
lede-17.01.3-bcm53xx-buffalo-wxr-1900dhp-squashfs.trx

- Steps to reproduce
1. Flash lede-17.01.1-bcm53xx-buffalo-wxr-1900dhp-squashfs.trx
2. Observe working - luci stats on overview page, PPPoE sucessful connection
3. Flash lede-17.01.2-bcm53xx-buffalo-wxr-1900dhp-squashfs.trx via luci (uncheck preserve settings)
4. Observe issues - luci no stats for memory etc, PPPoE fails to connect after setup.

Please let me know what other information or further testing would be useful.

16.10.20171063ToolchainFeature RequestVery LowLowimagebuilder: show IMAGE_SIZE in `make info`TrunkUnconfirmed Task Description

It would be very handy to know the max image size possible for devices.

Instead of parsing e.g. https://lede-project.org/toh/start manually it would be handy to add this capability to all imagebuilders itself.

A Value of 0 could be used as no limitation (as for x86/64).

09.10.20171052Base systemBug ReportVery LowLowdnsmasq hotplug script does not work inside ujailTrunkUnconfirmed Task Description

Testing b73986a8264016883a8a7d666687a340cb810934 on ipq806x (C2600, specifically), using dnsmasq inside ujail fails to run hotplug events because /lib/functions.sh is unavailable inside the jail:

Mon Oct 9 20:13:53 2017 daemon.debug dnsmasq-script[1]: /sbin/hotplug-call: .: line 6: can’t open ‘/lib/functions.sh’ Mon Oct 9 20:13:53 2017 daemon.warn dnsmasq[1]: script process exited with status 2

Unfortunately, the fix is not as simple as adding /lib/functions.sh to the jail mount, as that results in the uninformative

Mon Oct 9 20:15:35 2017 daemon.warn dnsmasq[1]: script process exited with status 1

Suggestions?

05.10.20171040Base systemBug ReportVery LowLowCan't set WiFi HT mode per-SSIDTrunkUnconfirmed Task Description

WZR-600DHP with OpenWrt (Attitude Adjustment) allowed me to set htmode per-SSID. Furthermore, this seems to have worked, since my Nexus 5X (which doesn’t work with HT40 on any channel other than 3) connected to my HT20 SSID, but failed to connect to my HT40 SSID.

LEDE (Reboot / 17.01.2) seems to have moved htmode to a radio-specific option instead, so I have lost this functionality.

29.09.20171024PackagesFeature RequestVery LowLowThere is no "LEDE interface" for the Linux interface cr...AllResearching Task Description

Let’s say I want to enable dropbear only in the tun0 interface created by OpenVPN. The dropbear configuration has an “Interface” field where I can make it listen, for example, only on the “wan” or “lan” interfaces. But the tun0 interface has not been created by anything in /etc/config/network and LEDE doesn’t really know about it, so I can’t specify it the dropbear configuration.

Even adding the tun0 interface to a “vpn” network in /etc/config/network using “proto none” fails to do the trick.

13.09.20171008Base systemBug ReportVery LowLowTeach procd about mounpoint or path dependenciesTrunkUnconfirmed Task Description

So far as I have been able to discern, there is no mechanism for blocking a service’s start until a particular filesystem has been mounted (or directory exists). The motivation is that I run collectd (via luci-statistics, natch) on my router and persist the data sets (rrds) across reboot by having them written to a USB stick. However, early in boot, collectd sometimes (often? always?) manages to come up before the mount completes, and so touches the on-router flash, creating its basedir and datadir and the rrds and so on.

11.09.20171006Base systemFeature RequestVery LowLowStart syslog service(s) before network comes upTrunkUnconfirmed Task Description

Not platform specific.

Seen on LEDE head.

There doesn’t seem to be a reason why syslog service can’t be brought up earlier, such as START=12.

Since it typically runs on an unbound socket, adding or deleting interfaces should have no effect.

This would also allow any configuration (network and otherwise) scripts encountering errors to log them.

11.09.20171005Base systemFeature RequestVery LowLowsysupgrade should stop network serviceTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of LEDE release, packages, etc.
- Steps to reproduce

 

Applicable to all devices using the generic sysupgrade.

Seen on LEDE head.

To reproduce:

scp over a new .img file

upgrade it as “sysupgrade -v xyzzy.img”

While that’s running, you’ll be able to ping the router, but if you do an http connection to it, it will be reset.

What would be simpler would be doing a “/etc/init.d/network stop” just after killing off all services (including web servers).

This would make it easier to add scripting which auto-detects when the upgrade has completed by reconnecting after a reasonable wait (and retrying as necessary).

03.09.2017998PackagesBug ReportLowLowpackages: "make packages/X/check" should print warnings...TrunkNew Task Description

Currently, when running “make check” on a single package, it does not print any warning. V=s is needed to see the warnings. The build system should print the warnings in all cases, because that’s what the user asks for!

To reproduce:

$ make package/nlbwmon/check 
 make[1] package/nlbwmon/check
 make[2] -C feeds/packages/net/nlbwmon check
$ make package/nlbwmon/check V=s
make[1]: Entering directory '/tmp/lede'
make[2]: Entering directory '/tmp/lede/feeds/packages/net/nlbwmon'
WARNING: nlbwmon-2017-08-02-32fc0925.tar.xz is missing, please run make download before re-running this check
make[2]: Leaving directory '/tmp/lede/feeds/packages/net/nlbwmon'
make[1]: Leaving directory '/tmp/lede'

The main target make check (without specifying any package) works fine, because it seems to run in verbose mode by default:

$ make check
make[3]: Entering directory '/tmp/lede/tools/gmp'
make[3]: Leaving directory '/tmp/lede/tools/gmp'
...
make[3]: Entering directory '/tmp/lede/package/network/utils/iwinfo'
WARNING: PKG_MIRROR_HASH is missing, set to 7bd294f50f8ec8c0497c5fbe5527f3ae098814cdfeecf4ccf78a2a8937611664
make[3]: Leaving directory '/tmp/lede/package/network/utils/iwinfo'
...

I tried to fix the issue myself but this is way above my understanding of make.

02.09.2017997WebsiteFeature RequestVery LowLowImplement dark theme (or custom color controls)TrunkUnconfirmed Task Description

regarding website design:
grey text on white background / light blue text on white background

this is a problem in bright viewing environments & LCD panels with poor contrast ratio

Please consider a dark theme option (or custom color controls)


28.08.2017990Base systemBug ReportVery LowLowopenvpn-openssl does not build without deprecated OpenS...TrunkUnconfirmed Task Description

With LEDE HEAD (4b3ffecf2bbbfb8df618314e5bec52659b648fac) and no CONFIG_OPENSSL_WITH_DEPRECATED, I get

ccache_cc -DHAVE_CONFIG_H -I. -I../.. -I../../include  -I../../include -I../../src/compat -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-
mips_24kc_gcc-5.4.0_musl/include/fortify -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include   -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/include   -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/include -DPLUGIN_LIBDIR=\"/usr/lib/openvpn/plugins\"  -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller
-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/tank/openwrt/scratch/builder-usbnetgw/build_dir/target-mips_24kc_musl/openvpn-openssl/openvpn-2.4.3:openvpn-2.4.3 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections  -std=c99 -MT crypto_openssl.o -MD -MP
-MF .deps/crypto_openssl.Tpo -c -o crypto_openssl.o crypto_openssl.c
In file included from syshead.h:182:0,
                 from crypto_openssl.c:35:
/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/sys/poll.h:1:2: warning: #warning redirecting incorrect #include <sys/poll.h> to <poll.h> [-Wcpp]
 #warning redirecting incorrect #include <sys/poll.h> to <poll.h>
  ^
In file included from crypto_openssl.c:44:0:
openssl_compat.h: In function 'RSA_set_flags':
openssl_compat.h:326:12: error: dereferencing pointer to incomplete type 'RSA {aka struct rsa_st}'
         rsa->flags = flags;
            ^
openssl_compat.h: In function 'RSA_get0_key':
openssl_compat.h:346:23: error: dereferencing pointer to incomplete type 'RSA {aka const struct rsa_st}'
         *n = rsa ? rsa->n : NULL;
                       ^
openssl_compat.h: In function 'RSA_set0_key':
openssl_compat.h:380:9: warning: implicit declaration of function 'BN_free' [-Wimplicit-function-declaration]
         BN_free(rsa->n);
         ^
openssl_compat.h: In function 'RSA_bits':
openssl_compat.h:410:16: warning: implicit declaration of function 'BN_num_bits' [-Wimplicit-function-declaration]
     return n ? BN_num_bits(n) : 0;
                ^
openssl_compat.h: In function 'DSA_get0_pqg':
openssl_compat.h:429:23: error: dereferencing pointer to incomplete type 'DSA {aka const struct dsa_st}'
         *p = dsa ? dsa->p : NULL;
                       ^
In file included from crypto_openssl.c:40:0:
openssl_compat.h: In function 'RSA_meth_new':
openssl_compat.h:470:31: error: invalid application of 'sizeof' to incomplete type 'RSA_METHOD {aka struct rsa_meth_st}'
     ALLOC_OBJ_CLEAR(rsa_meth, RSA_METHOD);
                               ^
buffer.h:1014:61: note: in definition of macro 'ALLOC_OBJ'
         check_malloc_return((dptr) = (type *) malloc(sizeof(type))); \
                                                             ^
openssl_compat.h:470:5: note: in expansion of macro 'ALLOC_OBJ_CLEAR'
     ALLOC_OBJ_CLEAR(rsa_meth, RSA_METHOD);
     ^
openssl_compat.h:470:31: error: invalid application of 'sizeof' to incomplete type 'RSA_METHOD {aka struct rsa_meth_st}'
     ALLOC_OBJ_CLEAR(rsa_meth, RSA_METHOD);
                               ^
buffer.h:1020:34: note: in definition of macro 'ALLOC_OBJ_CLEAR'
         memset((dptr), 0, sizeof(type)); \
                                  ^
In file included from crypto_openssl.c:44:0:
openssl_compat.h:471:13: error: dereferencing pointer to incomplete type 'RSA_METHOD {aka struct rsa_meth_st}'
     rsa_meth->name = string_alloc(name, NULL);
             ^
Makefile:672: recipe for target 'crypto_openssl.o' failed
make[7]: *** [crypto_openssl.o] Error 1

This looks to be due to incomplete backports of openssl1.1 changes into 1.0.2l (or earlier 1.0 releases, I’m not sure). In particular, many of these pieces of code are guarded by #ifdef HAVE_... tests which are currently evaluating to false. For example,
HAVE_DSA_GET0_PQG is unset because

<code>
configure:16116: checking for DSA_get0_pqg
configure:16116: ccache_cc -o conftest -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/tank/openwrt/scratch/builder-usbnetgw/build_dir/target-mips_24kc_musl/openvpn-openssl/openvpn-2.4.3:openvpn-2.4.3 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -ffunction-sections -fdata-sections -std=c99 -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/include -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include/fortify -I/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/include -L/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/lib -L/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/lib -L/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/usr/lib -L/tank/openwrt/scratch/builder-usbnetgw/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/lib -znow -zrelro -Wl,–gc-sections conftest.c -L/tank/openwrt/scratch/builder-usbnetgw/staging_dir/target-mips_24kc_musl/usr/lib -lcrypto -lssl >&5
/tmp/cczFWI5b.o: In function `main’:
conftest.c:(.text.startup.main+0×2): undefined reference to `DSA_get0_pqg’ <code>

27.08.2017986Base systemBug ReportVery LowLowARV752DPW missing default switch configTrunkUnconfirmed Task Description

Hi

On the ARV752DPW, with LEDE SNAPSHOT, r4723-4fce22e, and u-boot as linked to in the OpenWRT Wiki [http://www.galax.is/files/802/flash-uboot.bin] luci gives the warning message “Switch has unknown structure”.
The structure should be WAN, 1, 2, 3, 4, CPU.]

Also, swconfig shows that any configuration in (etc(config/network will be loaded on top of a default configuration that already exists at boot time. The switch does not appear to be properly initialized. Is this still supposed to happen in u-boot or should LEDE do this now?

e.g. /etc/config/network with:

...
config switch                                                        
        option name 'switch0'                                        
        option reset '1'                                             
        option enable_vlan '1'                                       
                                                                     
config switch_vlan                
        option device 'switch0'   
        option vlan '1'           
        option ports '1 2 3 4 5t' 
                                  
config switch_vlan                
        option device 'switch0'  
        option vlan '2'          
        option ports '0 5t'      
...

leads to this after reboot:


VLAN 0:
	vid: 0
	ports: 0 5t 
VLAN 1:
	vid: 1
	ports: 1 2 3 4 5t 
VLAN 2:
	vid: 2
	ports: 0 5t 
VLAN 3:
	vid: 3
	ports: 3 5t 
VLAN 4:
	vid: 4
	ports: 4 5t 
VLAN 5:
	vid: 5
	ports: 0 1 2 3 4 
 
27.08.2017985Base systemBug ReportVery LowLowDIR-320 B1 dont save it's settings after power offTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on DIR-320 B1 (NRU)
- Software versions of LEDE release, packages, etc. 17.01.2
- Steps to reproduce

 Just Install LEDE 17.01.2 configure it. And get electrical plug off. Plug in and device settings are default.
25.08.2017980Base systemBug ReportVery LowLowImage Builder trx issue a "WARNING: maxlen exceeds defa...TrunkUnconfirmed Task Description

Hi all!

Downloaded Image Builder lede-imagebuilder-17.01.2-brcm47xx-legacy.Linux-x86_64 and when running it with the following command line:

make image PROFILE="linksys-wrt54gs" 

I get the following error message from “mjn3’s trx replacement - v0.81.1“, several time, every time an image is prepared

WARNING: maxlen exceeds default maximum!  Beware of overwriting nvram!

Here is the listing of the bin/targets/brcm47xx/legacy directory showing that no image exceed the 7,5 MB limit that seems to be hard coded in the trx.c utility source code.

-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:30 lede-17.01.2-brcm47xx-legacy-asus-wl-300g-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:30 lede-17.01.2-brcm47xx-legacy-asus-wl-320gp-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:30 lede-17.01.2-brcm47xx-legacy-asus-wl-330ge-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:30 lede-17.01.2-brcm47xx-legacy-asus-wl-500gp-v1-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:31 lede-17.01.2-brcm47xx-legacy-asus-wl-500gp-v2-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:31 lede-17.01.2-brcm47xx-legacy-asus-wl-500w-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:31 lede-17.01.2-brcm47xx-legacy-asus-wl-520gu-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:31 lede-17.01.2-brcm47xx-legacy-asus-wl-550ge-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:31 lede-17.01.2-brcm47xx-legacy-asus-wl-hdd25-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu    1869 Aug 25 15:34 lede-17.01.2-brcm47xx-legacy-device-linksys-wrt54gs.manifest
-rw-rw-r-- 1 xubuntu xubuntu 3543065 Aug 25 15:31 lede-17.01.2-brcm47xx-legacy-dlink-dwl-3150-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543052 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-edimax-ps1208-mfg-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 4001892 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-huawei-e970-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt150n-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt160n-v1-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt300n-v1-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt300n-v1-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54g3g-em-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54g3g-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54g3gv2-vf-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54g3gv2-vf-squashfs.noheader.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54g-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54gs-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrt54gs-v4-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543072 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-linksys-wrtsl54gs-squashfs.bin
-rw-r--r-- 1 xubuntu xubuntu 3543048 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-motorola-wa840g-squashfs.bin
-rw-r--r-- 1 xubuntu xubuntu 3543048 Aug 25 15:32 lede-17.01.2-brcm47xx-legacy-motorola-we800g-squashfs.bin
-rw-r--r-- 1 xubuntu xubuntu 3543048 Aug 25 15:33 lede-17.01.2-brcm47xx-legacy-motorola-wr850g-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543098 Aug 25 15:33 lede-17.01.2-brcm47xx-legacy-netgear-wgr614-v8-squashfs.chk
-rw-rw-r-- 1 xubuntu xubuntu 3674112 Aug 25 15:33 lede-17.01.2-brcm47xx-legacy-netgear-wgt634u-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu 3543098 Aug 25 15:34 lede-17.01.2-brcm47xx-legacy-netgear-wndr3300-v1-squashfs.chk
-rw-rw-r-- 1 xubuntu xubuntu 3543098 Aug 25 15:34 lede-17.01.2-brcm47xx-legacy-netgear-wnr834b-v2-squashfs.chk
-rw-rw-r-- 1 xubuntu xubuntu 4001792 Aug 25 15:34 lede-17.01.2-brcm47xx-legacy-standard-noloader-gz-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543040 Aug 25 15:34 lede-17.01.2-brcm47xx-legacy-standard-squashfs.trx
-rw-rw-r-- 1 xubuntu xubuntu 3543068 Aug 25 15:34 lede-17.01.2-brcm47xx-legacy-usrobotics-usr5461-squashfs.bin
-rw-rw-r-- 1 xubuntu xubuntu    4375 Aug 25 15:34 sha256sums

Thanx for your support.

Paolo

24.08.2017978Base systemBug ReportVery LowLownetifd: support smaller ipv6 segments than /64TrunkUnconfirmed Task Description

netifd makes the assumption that ipv6 segments will never be any smaller than a /64; it quite often computes things like (1 « (64 - prefix→length)) which obviously won’t work out very well when prefix→length > 64. (Incidentally, it looks like it’s never been tested with prefixes larger than a /32, too, since things like “int32_t current = 0, asize = (1 « (64 - assign→length)) - 1;” will also not work out very well when assign→length ⇐ 32.)

The Linux network stack itself is more than happy to operate with these smaller segments, and odhcpd happily hands out leases. I know SLAAC won’t work on these segments, but that’s no reason to keep netifd from believing in them, IMHO. As it stands, I have several interfaces configured that the ubus-centric tools refuse to believe are set up!

23.08.2017975Base systemBug ReportVery LowLowARV752DPW u-boot partition to small for recent u-bootAllUnconfirmed Task Description

Applies to 17.01.2 and trunk.

/target/linux/lantiq/dts/ARV752DPW.dts defines a uboot partition of 64k and places the firmware partition at 0×00020000.
There is no recent u-boot that would fit into 64k. The u-boot images in the LEDE repo are 192k.
The kernel_address should be 0×00040000 instead.

Sorry, I do not have the resources right now to download the source and create a proper patch. But the attached diff should give you an idea:

13.08.2017958Base systemBug ReportVery LowLowArcher C2600 - high latency over 5GHz wireless & no int...TrunkUnconfirmed Task Description

QCA9980 should have intermediate software queues. Intermediate software queues don’t seem to be working. The reqular mq qdisc is in use for the 5GHz wireless.

A previous build had high latency on the 5 GHz wireless interface. The latency was spiking to 20-50ms with a single client.

 FS#957  is connected to this bug. The router might be unstable because of the other bug.

LEDE commit: df3295f50e54909090846de12f7deb3ff8de6557

 


03.08.2017950Base systemBug ReportVery LowLowcjdns LEDE support for arm_cortex-a15_neon-vfpv4TrunkUnconfirmed Task Description

Something went wrong with compliation?

Target: ipq806xSubtarget: genericPackage architecture: arm_cortex-a15_neon-vfpv4
Linux kokos 4.4.74 #0 SMP Fri Jul 14 21:36:50 2017 armv7l GNU/Linux

dmesg

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.74 (cezary@eko.one.pl) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3101-bce140e) ) #0 SMP Fri Jul 14 21:36:50 2017
[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: TP-Link Archer C2600

cli

root@kokos:~# opkg install cjdns luci-app-cjdns
Installing cjdns (0.17-3) to root...
Downloading http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/arm_cortex-a15_neon-vfpv4/routing/cjdns_0.17-3_arm_cortex-a15_neon-vfpv4.ipk
Installing luci-app-cjdns (1.3-5) to root...
Downloading http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/arm_cortex-a15_neon-vfpv4/routing/luci-app-cjdns_1.3-5_arm_cortex-a15_neon-vfpv4.ipk
Configuring cjdns.
Segmentation fault
Segmentation fault
dkjson: no valid JSON value (reached the end) (try cjdroute --cleanconf)
Segmentation fault
Segmentation fault
dkjson: no valid JSON value (reached the end) (try cjdroute --cleanconf)
Segmentation fault
Segmentation fault
dkjson: no valid JSON value (reached the end) (try cjdroute --cleanconf)
Configuring luci-app-cjdns.
root@kokos:~# cjdroute --cleanconf
Segmentation fault

root@kokos:~# gdb cjdroute
GNU gdb (GDB) 7.11.1
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "arm-openwrt-linux".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from cjdroute...(no debugging symbols found)...done.
(gdb)

01.08.2017944PackagesBug ReportVery LowLowfirewall3 isn't holding iptables lockTrunkUnconfirmed Task Description

I was first thinking that my missing iptables rules are related to the bug  FS#943 . But it looks like firewall3 is not holding the iptables lock via the option “-w”. This is unsafe because multiple iptables process may try to change a table at the same time and thus overwrite the final results of another iptables process.

The -w functionality for iptables-restore can be found in https://git.netfilter.org/iptables/commit/?id=999eaa241212d3952ddff39a99d0d55a74e3639e

19.07.2017915Base systemBug ReportVery LowLowWRT54GS v1.1 Power LED flashes & leds-gpio fails to loa...AllUnconfirmed Task Description

The leds-gpio module fails to load on WRT54GS v1.1 with this error message in the console:
“leds-gpio: probe of leds-gpio failed with error -16” This applies both to OpenWRT 15.05.1 and LEDE 17.01.2 as well as the latest Snapshot.

The nvram variable “boardtype” is 0×0708 on this device.
In leds.c this gets mapped to “bcm47xx_leds_linksys_wrt54g_generic” http://elixir.free-electrons.com/linux/latest/source/arch/mips/bcm47xx/leds.c#L677

With the following layout:

BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),

But this layout is invalid because this board does not have the “SecureEasySetup” WPS button.
GPIO5 is used by the reset button, that is why leds-gpio fails with error -16 (Device or resource busy).

As a quick test I changed the “boardtype” to 0×0101, leds-gpio can then load successfully and the power LED no longer flashes.
That layout is however not correct for the WRT54GS, the actual layout is:

Name	GPIO	Polarity
WLAN	0	Active low
POWER	1	Active high
DMZ	7	Active low

The problem in the source is that “boardtype” 0×0708 is not a unique identifier.
That actually matches several WRT54G v2 > v3.1 devices, and apparently also WRT54GS up to revision 2.1 that has the WPS button.
See the following old bug report for a list: https://lists.openwrt.org/pipermail/openwrt-devel/2014-June/025868.html

So the proper fix would be to introduce the variable “boardflags” as well into the code:
http://elixir.free-electrons.com/linux/latest/source/arch/mips/bcm47xx/board.c#L297

It is also worth noting that the reason the Power LED flickers is due to it’s hardware implementation.
The LED can only be on or flashing, the flashing is done by an oscillator on the board itself.
Ref: https://bugs.lede-project.org/index.php?do=details&task_id=793

17.07.2017911OtherFeature RequestVery LowLowProblem with login into private git reposAllNew Task Description

I am not able to use packages from my private git repos which needs login. The system during the build process don’t ask me for login as before.

Here is the verbose log output:

make[3]: Leaving directory `/home/flowtester/caes/platform/package/base-files'
make[3]: Entering directory `/home/flowtester/caes/platform/package-bumblebee/packages/libdevereader'
mkdir -p /home/flowtester/caes/platform/dl
SHELL= flock /home/flowtester/caes/platform/tmp/.libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860.tar.gz.flock -c '          echo "Checking out files from the git repository..."; mkdir -p /home/flowtester/caes/platform/tmp/dl && cd /home/flowtester/caes/platform/tmp/dl && rm -rf libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 && [ \! -d libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 ] && git clone  https://redmine.develict.com/git/devereader libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 && (cd libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 && git checkout daa94e0fad44a000892570665e6c792fd9cad860 && git submodule update --init --recursive) && echo "Packing checkout..." && export TAR_TIMESTAMP=`cd libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 && git log -1 --format='\''@%ct'\''` && rm -rf libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860/.git &&  tar --numeric-owner --owner=0 --group=0 --sort=name ${TAR_TIMESTAMP:+--mtime="$TAR_TIMESTAMP"} -c libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860 |     gzip -nc > /home/flowtester/caes/platform/tmp/dl/libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860.tar.gz && mv /home/flowtester/caes/platform/tmp/dl/libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860.tar.gz /home/flowtester/caes/platform/dl/ && rm -rf libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860;     '
Checking out files from the git repository...
Cloning into 'libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860'...
fatal: Authentication failed for 'https://redmine.develict.com/git/devereader/'
make[3]: *** [/home/flowtester/caes/platform/dl/libdevereader-1.1.7-daa94e0fad44a000892570665e6c792fd9cad860.tar.gz] Error 128
make[3]: Leaving directory `/home/flowtester/caes/platform/package-bumblebee/packages/libdevereader'
make[2]: *** [package/feeds/bumblebee/libdevereader/compile] Error 2
make[2]: Leaving directory `/home/flowtester/caes/platform'
make[1]: *** [/home/flowtester/caes/platform/staging_dir/target-mipsel_24kc_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory `/home/flowtester/caes/platform'
make: *** [world] Error 2

If I try it manually from cli everythings works but not during the prepare process ....


13.07.2017903Base systemBug ReportVery LowLowPB44 board vsc7385 don't workTrunkUnconfirmed Task Description

use the lede head code ,make the PB44 code, the PB44 borad can work ,but the lan deivice not good. From the log Just fond the vsc7358 switch not work


12.07.2017901Base systemBug ReportVery LowLowUSB not working on MikroTik hAP ac TrunkUnconfirmed Task Description

Only affecting hAP ac / RB962UiGS-5HacT2HnT

Tested with LEDE trunk in April, no relevant commits to device since.

GPIO to control USB power works, and USB controller appears in dmesg on boot. Upon connecting any device, it is not recognised and there are no kernel messages. Same devices work (albeit via internal hub) on Archer C7 v2 using same SoC.

Bug independently verified by another user, not a hardware defect with a single unit.

I am aware of the irony that I contributed the support for this device, and reported USB as working. I was only looking for the controller to be recognised and neglected to test with an actual USB device until after this was merged. My bad. Logging as a bug so that anyone who finds it not working can at least see a record and know to direct their blame towards me :)

06.07.2017890Base systemBug ReportVery LowLowWNDR3400v1 brcmsmac fails to attach phy0 & phy1, error ...TrunkUnconfirmed Task Description

On my Netgear WNDR3400v1, WiFi doesn’t work with the brcmsmac driver, it should.

Here is the error in dmesg upon loading the brcmsmac driver:

[   13.922244] brcmsmac bcma0:1: mfg 4bf core 812 rev 17 class 0 irq 3
[   13.928938] ieee80211 phy0: wl0: brcms_b_attach: Unsupported Broadcom board type (0xb4cf) or revision level (0x0)
[   13.939483] ieee80211 phy0: wl0: brcms_b_attach: failed with err 15
[   13.945869] ieee80211 phy0: wl0: brcms_c_attach: failed with err 15
[   13.952317] ieee80211 phy0: brcmsmac: attach() failed with code 15
[   13.958605] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[   13.964536] brcmsmac bcma1:1: mfg 4bf core 812 rev 23 class 0 irq 6
[   13.971222] bcma: bus1: Switched to core: 0x812
[   13.971613] ieee80211 phy1: wl0: brcms_b_attach: Unsupported Broadcom board type (0xb4cf) or revision level (0x0)
[   13.982136] ieee80211 phy1: wl0: brcms_b_attach: failed with err 15
[   13.988517] ieee80211 phy1: wl0: brcms_c_attach: failed with err 15
[   13.994965] ieee80211 phy1: brcmsmac: attach() failed with code 15
[   14.001311] brcmsmac: brcms_bcma_probe: brcms_attach failed!

It seems it is reading the revision level incorrectly, and refusing to load.

nvram show displays:

boardnum=01
boardtype=0xb4cf
boardrev=0x1100

System Information:

Reboot (SNAPSHOT, r4529-05d6e92)

root@lede:~# cat /etc/openwrt_release 
DISTRIB_ID='LEDE'
DISTRIB_RELEASE='SNAPSHOT'
DISTRIB_REVISION='r4529-05d6e92'
DISTRIB_CODENAME='reboot'
DISTRIB_TARGET='brcm47xx/mips74k'
DISTRIB_ARCH='mipsel_74kc'
DISTRIB_DESCRIPTION='LEDE Reboot SNAPSHOT r4529-05d6e92'
DISTRIB_TAINTS='no-all'

root@lede:~# uname -a
Linux lede 4.4.74 #0 Sun Jul 2 21:10:06 2017 mips GNU/Linux

   
[ logread ]
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    0.000000] Linux version 4.4.74 (buildbot@builds) (gcc version 5.4.0 (LEDE GCC 5.4.0 r4456-d98cafc) ) #0 Sun Jul 2 21:10:06 2017
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] CPU0 revision is: 00019740 (MIPS 74Kc)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcm47xx: Using bcma bus
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcma: bus0: Found chip with id 0x4716, rev 0x01 and package 0x0A
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] Determined physical RAM map:
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] Zone ranges:
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000]   HighMem  empty
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] Movable zone start for each node
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] Early memory node ranges
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 803a64c0, node_mem_map 81000000
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Wed Jul  5 22:22:41 2017 kern.warn kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Wed Jul  5 22:22:41 2017 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    0.000000] Kernel command line:  noinitrd console=ttyS0,115200
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] Memory: 60556K/65536K available (3002K kernel code, 134K rwdata, 696K rodata, 188K init, 294K bss, 4980K reserved, 0K cma-reserved, 0K highmem)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] NR_IRQS:128
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x1F, class 0x0)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x01, class 0x0)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0)
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.000000] bcma: bus0: Found rev 5 PMU (capabilities 0x11242C05)
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.000000] bcma: bus0: Found serial flash
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcma: bus0: Found M25P64 serial flash (size: 8192KiB, blocksize: 0x10000, blocks: 128)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcma: bus0: Early bus registered
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] MIPS: machine is Unknown Board
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] bcm47xx: Setting up vectored interrupts
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 8438235966 ns
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000015] sched_clock: 32 bits at 226MHz, resolution 4ns, wraps every 9481163773ns
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.000088] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.070063] pid_max: default: 32768 minimum: 301
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.070318] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.070345] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.074642] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.074715] futex hash table entries: 256 (order: -1, 3072 bytes)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.076193] NET: Registered protocol family 16
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.099321] clocksource: Switched to clocksource MIPS
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.101966] NET: Registered protocol family 2
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.103621] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.103678] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.103719] TCP: Hash tables configured (established 1024 bind 1024)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.103896] UDP hash table entries: 256 (order: 0, 4096 bytes)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.103944] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.104461] NET: Registered protocol family 1
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.104612] PCI: CLS 0 bytes, default 32
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.113504] bcma: bus0: Using SPROM revision 0 provided by platform.
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.113545] bcma: bus0: PMU resource config unknown or not needed for device 0x4716
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115561] bcma: bus0: Workarounds unknown or not needed for device 0x4716
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115580] bcma: bus0: Initializing MIPS core...
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115601] bcma: bus0: Moved i2s interrupt to oob line 7 instead of 8
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115628] bcma: bus0: set_irq: core 0x0812, irq 3 => 3
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115651] bcma: bus0: set_irq: core 0x082d, irq 4 => 4
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115674] bcma: bus0: set_irq: core 0x0819, irq 5 => 5
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115697] bcma: bus0: set_irq: core 0x0820, irq 6 => 6
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115718] bcma: bus0: set_irq: core 0x0800, irq 2 => 2
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115741] bcma: bus0: set_irq: core 0x0834, irq 0 => 2
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115756] bcma: bus0: IRQ reconfiguration done
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115772] bcma: core 0x0800, irq : 2(S)* 3  4  5  6  D  I 
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115825] bcma: core 0x0812, irq : 2(S)  3* 4  5  6  D  I 
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115869] bcma: core 0x082d, irq : 2(S)  3  4* 5  6  D  I 
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115913] bcma: core 0x082c, irq : 2(S)  3  4  5  6  D  I*
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.115957] bcma: core 0x0819, irq : 2(S)  3  4  5* 6  D  I 
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.116001] bcma: core 0x0820, irq : 2(S)  3  4  5  6* D  I 
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.116045] bcma: core 0x082e, irq : 2(S)  3  4  5  6  D* I 
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.116088] bcma: core 0x080e, irq : 2(S)  3  4  5  6  D  I*
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.116130] bcma: core 0x0834, irq : 2(S)* 3  4  5  6  D  I 
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.116176] bcma: bus0: PCIEcore in host mode found
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.304669] PCI host bridge to bus 0000:00
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.304727] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0bffffff]
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.304756] pci_bus 0000:00: root bus resource [io  0x0100-0x07ff]
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.304785] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.304814] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.304903] pci 0000:00:00.0: [14e4:4716] type 00 class 0x060000
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.304948] bcma: PCI: Fixing up bridge 0000:00:00.0
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.304969] bcma: PCI: Fixing up device 0000:00:00.0
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.305033] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.305073] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x07ffffff 64bit]
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.305187] pci 0000:00:00.0: supports D1 D2
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.305595] pci 0000:00:00.1: [14e4:0000] type 00 class 0x060000
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.305645] bcma: PCI: Fixing up bridge 0000:00:00.1
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.305666] bcma: PCI: Fixing up device 0000:00:00.1
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.305731] pci 0000:00:00.1: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.305770] pci 0000:00:00.1: reg 0x18: [mem 0x00000000-0x07ffffff 64bit]
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.305878] pci 0000:00:00.1: supports D1 D2
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.306355] pci 0000:00:01.0: [14e4:a8d8] type 00 class 0x028000
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.306490] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.306593] bcma: PCI: Fixing up addresses 0000:00:01.0
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.306642] pci 0000:00:01.0: BAR 0: assigned [mem 0x08000000-0x08003fff 64bit]
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.306809] pci 0000:00:01.0: supports D1 D2
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    0.307254] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.308856] bcma: bus0: Bus registered
Wed Jul  5 22:22:41 2017 kern.warn kernel: [    0.310393] Crashlog allocated RAM at address 0x3f00000
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.344150] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.344205] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.349655] io scheduler noop registered
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.349707] io scheduler deadline registered (default)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.350248] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.355394] console [ttyS0] disabled
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.375653] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2, base_baud = 1250000) is a U6_16550A
Wed Jul  5 22:22:41 2017 kern.info kernel: [    0.872455] console [ttyS0] enabled
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    0.989922] 7 bcm47xxpart partitions found on MTD device bcm47xxsflash
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    0.996576] Creating 7 MTD partitions on "bcm47xxsflash":
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    1.002140] 0x000000000000-0x000000040000 : "boot"
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    1.011599] 0x000000040000-0x0000007e0000 : "firmware"
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    1.020126] 0x0000007e0000-0x0000007f0000 : "board_data"
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    1.028709] 0x0000007f0000-0x000000800000 : "nvram"
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    1.036956] 0x00000004001c-0x000000040920 : "loader"
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    1.045355] 0x000000040920-0x00000017dc00 : "linux"
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    1.053621] 0x00000017dc00-0x0000007e0000 : "rootfs"
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    1.061906] mtd: device 6 (rootfs) set to be root filesystem
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    1.067729] 1 squashfs-split partitions found on MTD device rootfs
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    1.074136] 0x000000360000-0x0000007e0000 : "rootfs_data"
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.086521] libphy: Fixed MDIO Bus: probed
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.091101] bgmac_bcma bcma0:2: Found PHY addr: 30 (NOREGS)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.100515] libphy: bcma_mdio mii bus: probed
Wed Jul  5 22:22:41 2017 kern.warn kernel: [    1.104979] bgmac_bcma bcma0:2: Support for Roboswitch not implemented
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.264041] b53_common: found switch: BCM5325, rev 0
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.270621] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.276982] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
Wed Jul  5 22:22:41 2017 kern.warn kernel: [    1.285141] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.291021] bcma: PCI: Fixing up device 0000:00:01.0
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.296150] bcma: bus1: Found chip with id 43224, rev 0x01 and package 0x08
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.303351] bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.312133] bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.321015] bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    1.329246] bcma: bus1: Found rev 6 PMU (capabilities 0x108C2606)
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    1.330088] bcma: bus1: Using SPROM revision 0 provided by platform.
Wed Jul  5 22:22:41 2017 kern.debug kernel: [    1.330132] bcma: bus1: PMU resource config unknown or not needed for device 0xA8D8
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.340850] bcma: bus1: Bus registered
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.346903] NET: Registered protocol family 10
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.357396] NET: Registered protocol family 17
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.362216] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.375148] 8021q: 802.1Q VLAN Support v1.8
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.393155] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
Wed Jul  5 22:22:41 2017 kern.info kernel: [    1.401759] Freeing unused kernel memory: 188K (803c1000 - 803f0000)
Wed Jul  5 22:22:41 2017 user.info kernel: [    3.050931] init: Console is alive
Wed Jul  5 22:22:41 2017 user.info kernel: [    3.054861] init: - watchdog -
Wed Jul  5 22:22:41 2017 user.info kernel: [    4.254646] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.402007] usbcore: registered new interface driver usbfs
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.407764] usbcore: registered new interface driver hub
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.413517] usbcore: registered new device driver usb
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.427524] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.437246] ehci-platform: EHCI generic platform driver
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.442860] ehci-platform ehci-platform.0: EHCI Host Controller
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.449006] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.457485] ehci-platform ehci-platform.0: irq 5, io mem 0x18004000
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.479401] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.487835] hub 1-0:1.0: USB hub found
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.492481] hub 1-0:1.0: 2 ports detected
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.502125] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.510967] ohci-platform: OHCI generic platform driver
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.516448] ohci-platform ohci-platform.0: Generic Platform OHCI controller
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.523735] ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.532182] ohci-platform ohci-platform.0: irq 5, io mem 0x18009000
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.595330] hub 2-0:1.0: USB hub found
Wed Jul  5 22:22:41 2017 kern.info kernel: [    4.600124] hub 2-0:1.0: 2 ports detected
Wed Jul  5 22:22:41 2017 user.info kernel: [    4.608697] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Wed Jul  5 22:22:41 2017 user.info kernel: [    4.626861] init: - preinit -
Wed Jul  5 22:22:41 2017 kern.info kernel: [    5.011347] usb 1-1: new high-speed USB device number 2 using ehci-platform
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    5.263503] random: procd: uninitialized urandom read (4 bytes read, 9 bits of entropy available)
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    6.414938] random: jshn: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    6.608349] random: jshn: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
Wed Jul  5 22:22:41 2017 kern.notice kernel: [    6.731613] random: jshn: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
Wed Jul  5 22:22:41 2017 kern.info kernel: [    7.012119] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Wed Jul  5 22:22:41 2017 kern.info kernel: [    7.018248] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
Wed Jul  5 22:22:41 2017 kern.info kernel: [    8.569470] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Wed Jul  5 22:22:41 2017 kern.info kernel: [    8.576495] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Wed Jul  5 22:22:41 2017 kern.notice kernel: [   10.681655] jffs2: notice: (375) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Wed Jul  5 22:22:41 2017 user.info kernel: [   10.705445] mount_root: switching to jffs2 overlay
Wed Jul  5 22:22:41 2017 user.warn kernel: [   10.759409] urandom-seed: Seeding with /etc/urandom.seed
Wed Jul  5 22:22:41 2017 user.info kernel: [   10.971431] procd: - early -
Wed Jul  5 22:22:41 2017 user.info kernel: [   10.974613] procd: - watchdog -
Wed Jul  5 22:22:41 2017 user.info kernel: [   11.730144] procd: - watchdog -
Wed Jul  5 22:22:41 2017 user.info kernel: [   11.734119] procd: - ubus -
Wed Jul  5 22:22:41 2017 kern.notice kernel: [   11.756070] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
Wed Jul  5 22:22:41 2017 kern.notice kernel: [   11.789743] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
Wed Jul  5 22:22:41 2017 kern.notice kernel: [   11.799846] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
Wed Jul  5 22:22:41 2017 kern.notice kernel: [   11.809088] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
Wed Jul  5 22:22:41 2017 kern.notice kernel: [   11.819720] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
Wed Jul  5 22:22:41 2017 kern.notice kernel: [   11.828937] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
Wed Jul  5 22:22:41 2017 user.info kernel: [   11.840154] procd: - init -
Wed Jul  5 22:22:41 2017 user.info kernel: [   13.039395] kmodloader: loading kernel modules from /etc/modules.d/*
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.065020] tun: Universal TUN/TAP device driver, 1.6
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.070278] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.085691] ip6_tables: (C) 2000-2006 Netfilter Core Team
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.145711] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.153955] Backport generated by backports.git backports-20160324-13-g24da7d3c
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.171588] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.193691] nf_conntrack version 0.5.0 (949 buckets, 3796 max)
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.317055] xt_time: kernel timezone is -0000
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.325369] usbcore: registered new interface driver cdc_ether
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.427171] PPP generic driver version 2.4.2
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.436494] NET: Registered protocol family 24
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.450675] rndis_host 1-1:1.0 usb0: register 'rndis_host' at usb-ehci-platform.0-1, RNDIS device, 02:5b:53:31:37:31
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.461807] usbcore: registered new interface driver rndis_host
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.922244] brcmsmac bcma0:1: mfg 4bf core 812 rev 17 class 0 irq 3
Wed Jul  5 22:22:41 2017 kern.err kernel: [   13.928938] ieee80211 phy0: wl0: brcms_b_attach: Unsupported Broadcom board type (0xb4cf) or revision level (0x0)
Wed Jul  5 22:22:41 2017 kern.err kernel: [   13.939483] ieee80211 phy0: wl0: brcms_b_attach: failed with err 15
Wed Jul  5 22:22:41 2017 kern.err kernel: [   13.945869] ieee80211 phy0: wl0: brcms_c_attach: failed with err 15
Wed Jul  5 22:22:41 2017 kern.err kernel: [   13.952317] ieee80211 phy0: brcmsmac: attach() failed with code 15
Wed Jul  5 22:22:41 2017 kern.err kernel: [   13.958605] brcmsmac: brcms_bcma_probe: brcms_attach failed!
Wed Jul  5 22:22:41 2017 kern.info kernel: [   13.964536] brcmsmac bcma1:1: mfg 4bf core 812 rev 23 class 0 irq 6
Wed Jul  5 22:22:41 2017 kern.debug kernel: [   13.971222] bcma: bus1: Switched to core: 0x812
Wed Jul  5 22:22:41 2017 kern.err kernel: [   13.971613] ieee80211 phy1: wl0: brcms_b_attach: Unsupported Broadcom board type (0xb4cf) or revision level (0x0)
Wed Jul  5 22:22:41 2017 kern.err kernel: [   13.982136] ieee80211 phy1: wl0: brcms_b_attach: failed with err 15
Wed Jul  5 22:22:41 2017 kern.err kernel: [   13.988517] ieee80211 phy1: wl0: brcms_c_attach: failed with err 15
Wed Jul  5 22:22:41 2017 kern.err kernel: [   13.994965] ieee80211 phy1: brcmsmac: attach() failed with code 15
Wed Jul  5 22:22:41 2017 kern.err kernel: [   14.001311] brcmsmac: brcms_bcma_probe: brcms_attach failed!
Wed Jul  5 22:22:41 2017 user.info kernel: [   14.026333] kmodloader: done loading kernel modules from /etc/modules.d/*
Wed Jul  5 22:22:44 2017 user.notice : Added device handler type: tunnel
Wed Jul  5 22:22:44 2017 user.notice : Added device handler type: Network device
Wed Jul  5 22:22:44 2017 user.notice : Added device handler type: bridge
Wed Jul  5 22:22:44 2017 user.notice : Added device handler type: veth
Wed Jul  5 22:22:44 2017 user.notice : Added device handler type: macvlan
Wed Jul  5 22:22:44 2017 user.notice : Added device handler type: 8021ad
Wed Jul  5 22:22:44 2017 user.notice : Added device handler type: 8021q
Wed Jul  5 22:22:47 2017 authpriv.info dropbear[750]: Not backgrounding
Wed Jul  5 22:22:50 2017 kern.info kernel: [   24.261412] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Wed Jul  5 22:22:50 2017 kern.info kernel: [   24.286504] device eth0.1 entered promiscuous mode
Wed Jul  5 22:22:50 2017 kern.info kernel: [   24.291519] device eth0 entered promiscuous mode
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Interface 'lan' is enabled
Wed Jul  5 22:22:50 2017 kern.info kernel: [   24.312573] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Interface 'lan' is setting up now
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Interface 'lan' is now up
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Interface 'loopback' is enabled
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Interface 'loopback' is now up
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Interface 'usb' is enabled
Wed Jul  5 22:22:50 2017 kern.info kernel: [   24.442951] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Interface 'wan' is enabled
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Interface 'wan6' is enabled
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Network device 'lo' link is up
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Interface 'loopback' has link connectivity 
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Network device 'usb0' link is up
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Interface 'usb' has link connectivity 
Wed Jul  5 22:22:50 2017 daemon.notice netifd: Interface 'usb' is setting up now
Wed Jul  5 22:22:50 2017 daemon.notice netifd: usb (844): udhcpc: started, v1.26.2
Wed Jul  5 22:22:51 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Jul  5 22:22:51 2017 daemon.notice netifd: usb (844): udhcpc: sending discover
Wed Jul  5 22:22:51 2017 daemon.notice netifd: Network device 'eth0' link is up
Wed Jul  5 22:22:51 2017 kern.info kernel: [   25.639559] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Wed Jul  5 22:22:51 2017 kern.info kernel: [   25.699543] br-lan: port 1(eth0.1) entered forwarding state
Wed Jul  5 22:22:51 2017 kern.info kernel: [   25.705336] br-lan: port 1(eth0.1) entered forwarding state
Wed Jul  5 22:22:51 2017 kern.info kernel: [   25.711336] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Wed Jul  5 22:22:51 2017 daemon.notice netifd: VLAN 'eth0.1' link is up
Wed Jul  5 22:22:51 2017 daemon.notice netifd: VLAN 'eth0.2' link is up
Wed Jul  5 22:22:51 2017 daemon.notice netifd: Interface 'wan' has link connectivity 
Wed Jul  5 22:22:51 2017 daemon.notice netifd: Interface 'wan' is setting up now
Wed Jul  5 22:22:51 2017 daemon.notice netifd: Interface 'wan6' has link connectivity 
Wed Jul  5 22:22:51 2017 daemon.notice netifd: bridge 'br-lan' link is up
Wed Jul  5 22:22:51 2017 daemon.notice netifd: Interface 'lan' has link connectivity 
Wed Jul  5 22:22:51 2017 kern.info kernel: [   25.764246] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Wed Jul  5 22:22:51 2017 daemon.notice netifd: wan (877): udhcpc: started, v1.26.2
Wed Jul  5 22:22:52 2017 daemon.notice netifd: wan (877): udhcpc: sending discover
Wed Jul  5 22:22:52 2017 daemon.warn odhcpd[706]: DHCPV6 CONFIRM IA_NA from 000437e7143d006c0d83f363f544b6c68c5f on br-lan: not on-link 
Wed Jul  5 22:22:53 2017 kern.info kernel: [   27.699340] br-lan: port 1(eth0.1) entered forwarding state
Wed Jul  5 22:22:54 2017 daemon.err ntpdate[781]: name server cannot be used: Try again (-3)
Wed Jul  5 22:22:54 2017 daemon.notice netifd: usb (844): udhcpc: sending discover
Wed Jul  5 22:22:54 2017 authpriv.info dropbear[909]: Child connection from 192.168.65.102:53976
Wed Jul  5 22:22:55 2017 daemon.notice netifd: wan (877): udhcpc: sending discover
Wed Jul  5 22:22:57 2017 daemon.notice netifd: usb (844): udhcpc: sending discover
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: started, version 2.77 cachesize 150
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: DNS service limited to local subnets
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq-dhcp[947]: DHCP, IP range 192.168.65.100 -- 192.168.65.249, lease time 12h
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain test
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain onion
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain localhost
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain local
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain invalid
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain example.net
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain example.org
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain example.com
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using 3 more local addresses
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: reading /tmp/resolv.conf.auto
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain test
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain onion
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain localhost
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain local
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain invalid
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain example.net
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain example.org
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using local addresses only for domain example.com
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using nameserver 8.8.8.8#53
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using nameserver 8.8.4.4#53
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: using 3 more local addresses
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: read /etc/hosts - 4 addresses
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: read /tmp/hosts/odhcpd - 0 addresses
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq[947]: read /tmp/hosts/dhcp.cfg02411c - 3 addresses
Wed Jul  5 22:22:57 2017 daemon.info dnsmasq-dhcp[947]: read /etc/ethers - 0 addresses
Wed Jul  5 22:22:58 2017 daemon.notice netifd: wan (877): udhcpc: sending discover
Wed Jul  5 22:22:59 2017 daemon.err ntpdate[906]: name server cannot be used: Try again (-3)
Wed Jul  5 22:23:03 2017 daemon.info dnsmasq-dhcp[947]: DHCPDISCOVER(br-lan) 192.168.65.102 3c:97:0e:73:9c:4f 
Wed Jul  5 22:23:03 2017 daemon.info dnsmasq-dhcp[947]: DHCPOFFER(br-lan) 192.168.65.101 3c:97:0e:73:9c:4f 
Wed Jul  5 22:23:03 2017 daemon.info dnsmasq-dhcp[947]: DHCPREQUEST(br-lan) 192.168.65.101 3c:97:0e:73:9c:4f 
Wed Jul  5 22:23:03 2017 daemon.info dnsmasq-dhcp[947]: DHCPACK(br-lan) 192.168.65.101 3c:97:0e:73:9c:4f jessica-mate
Wed Jul  5 22:23:04 2017 daemon.err ntpdate[950]: name server cannot be used: Try again (-3)

[ dmesg ]
[    0.000000] Linux version 4.4.74 (buildbot@builds) (gcc version 5.4.0 (LEDE GCC 5.4.0 r4456-d98cafc) ) #0 Sun Jul 2 21:10:06 2017
[    0.000000] CPU0 revision is: 00019740 (MIPS 74Kc)
[    0.000000] bcm47xx: Using bcma bus
[    0.000000] bcma: bus0: Found chip with id 0x4716, rev 0x01 and package 0x0A
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 803a64c0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 60556K/65536K available (3002K kernel code, 134K rwdata, 696K rodata, 188K init, 294K bss, 4980K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:128
[    0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x1F, class 0x0)
[    0.000000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0)
[    0.000000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0)
[    0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x01, class 0x0)
[    0.000000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0)
[    0.000000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0)
[    0.000000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
[    0.000000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0)
[    0.000000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0)
[    0.000000] bcma: bus0: Found rev 5 PMU (capabilities 0x11242C05)
[    0.000000] bcma: bus0: Found serial flash
[    0.000000] bcma: bus0: Found M25P64 serial flash (size: 8192KiB, blocksize: 0x10000, blocks: 128)
[    0.000000] bcma: bus0: Early bus registered
[    0.000000] MIPS: machine is Unknown Board
[    0.000000] bcm47xx: Setting up vectored interrupts
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 8438235966 ns
[    0.000015] sched_clock: 32 bits at 226MHz, resolution 4ns, wraps every 9481163773ns
[    0.000088] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
[    0.070063] pid_max: default: 32768 minimum: 301
[    0.070318] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070345] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.074642] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.074715] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.076193] NET: Registered protocol family 16
[    0.099321] clocksource: Switched to clocksource MIPS
[    0.101966] NET: Registered protocol family 2
[    0.103621] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.103678] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.103719] TCP: Hash tables configured (established 1024 bind 1024)
[    0.103896] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.103944] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.104461] NET: Registered protocol family 1
[    0.104612] PCI: CLS 0 bytes, default 32
[    0.113504] bcma: bus0: Using SPROM revision 0 provided by platform.
[    0.113545] bcma: bus0: PMU resource config unknown or not needed for device 0x4716
[    0.115561] bcma: bus0: Workarounds unknown or not needed for device 0x4716
[    0.115580] bcma: bus0: Initializing MIPS core...
[    0.115601] bcma: bus0: Moved i2s interrupt to oob line 7 instead of 8
[    0.115628] bcma: bus0: set_irq: core 0x0812, irq 3 => 3
[    0.115651] bcma: bus0: set_irq: core 0x082d, irq 4 => 4
[    0.115674] bcma: bus0: set_irq: core 0x0819, irq 5 => 5
[    0.115697] bcma: bus0: set_irq: core 0x0820, irq 6 => 6
[    0.115718] bcma: bus0: set_irq: core 0x0800, irq 2 => 2
[    0.115741] bcma: bus0: set_irq: core 0x0834, irq 0 => 2
[    0.115756] bcma: bus0: IRQ reconfiguration done
[    0.115772] bcma: core 0x0800, irq : 2(S)* 3  4  5  6  D  I 
[    0.115825] bcma: core 0x0812, irq : 2(S)  3* 4  5  6  D  I 
[    0.115869] bcma: core 0x082d, irq : 2(S)  3  4* 5  6  D  I 
[    0.115913] bcma: core 0x082c, irq : 2(S)  3  4  5  6  D  I*
[    0.115957] bcma: core 0x0819, irq : 2(S)  3  4  5* 6  D  I 
[    0.116001] bcma: core 0x0820, irq : 2(S)  3  4  5  6* D  I 
[    0.116045] bcma: core 0x082e, irq : 2(S)  3  4  5  6  D* I 
[    0.116088] bcma: core 0x080e, irq : 2(S)  3  4  5  6  D  I*
[    0.116130] bcma: core 0x0834, irq : 2(S)* 3  4  5  6  D  I 
[    0.116176] bcma: bus0: PCIEcore in host mode found
[    0.304669] PCI host bridge to bus 0000:00
[    0.304727] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0bffffff]
[    0.304756] pci_bus 0000:00: root bus resource [io  0x0100-0x07ff]
[    0.304785] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.304814] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.304903] pci 0000:00:00.0: [14e4:4716] type 00 class 0x060000
[    0.304948] bcma: PCI: Fixing up bridge 0000:00:00.0
[    0.304969] bcma: PCI: Fixing up device 0000:00:00.0
[    0.305033] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    0.305073] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x07ffffff 64bit]
[    0.305187] pci 0000:00:00.0: supports D1 D2
[    0.305595] pci 0000:00:00.1: [14e4:0000] type 00 class 0x060000
[    0.305645] bcma: PCI: Fixing up bridge 0000:00:00.1
[    0.305666] bcma: PCI: Fixing up device 0000:00:00.1
[    0.305731] pci 0000:00:00.1: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    0.305770] pci 0000:00:00.1: reg 0x18: [mem 0x00000000-0x07ffffff 64bit]
[    0.305878] pci 0000:00:00.1: supports D1 D2
[    0.306355] pci 0000:00:01.0: [14e4:a8d8] type 00 class 0x028000
[    0.306490] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    0.306593] bcma: PCI: Fixing up addresses 0000:00:01.0
[    0.306642] pci 0000:00:01.0: BAR 0: assigned [mem 0x08000000-0x08003fff 64bit]
[    0.306809] pci 0000:00:01.0: supports D1 D2
[    0.307254] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.308856] bcma: bus0: Bus registered
[    0.310393] Crashlog allocated RAM at address 0x3f00000
[    0.344150] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.344205] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.349655] io scheduler noop registered
[    0.349707] io scheduler deadline registered (default)
[    0.350248] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.355394] console [ttyS0] disabled
[    0.375653] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2, base_baud = 1250000) is a U6_16550A
[    0.872455] console [ttyS0] enabled
[    0.989922] 7 bcm47xxpart partitions found on MTD device bcm47xxsflash
[    0.996576] Creating 7 MTD partitions on "bcm47xxsflash":
[    1.002140] 0x000000000000-0x000000040000 : "boot"
[    1.011599] 0x000000040000-0x0000007e0000 : "firmware"
[    1.020126] 0x0000007e0000-0x0000007f0000 : "board_data"
[    1.028709] 0x0000007f0000-0x000000800000 : "nvram"
[    1.036956] 0x00000004001c-0x000000040920 : "loader"
[    1.045355] 0x000000040920-0x00000017dc00 : "linux"
[    1.053621] 0x00000017dc00-0x0000007e0000 : "rootfs"
[    1.061906] mtd: device 6 (rootfs) set to be root filesystem
[    1.067729] 1 squashfs-split partitions found on MTD device rootfs
[    1.074136] 0x000000360000-0x0000007e0000 : "rootfs_data"
[    1.086521] libphy: Fixed MDIO Bus: probed
[    1.091101] bgmac_bcma bcma0:2: Found PHY addr: 30 (NOREGS)
[    1.100515] libphy: bcma_mdio mii bus: probed
[    1.104979] bgmac_bcma bcma0:2: Support for Roboswitch not implemented
[    1.264041] b53_common: found switch: BCM5325, rev 0
[    1.270621] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[    1.276982] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
[    1.285141] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[    1.291021] bcma: PCI: Fixing up device 0000:00:01.0
[    1.296150] bcma: bus1: Found chip with id 43224, rev 0x01 and package 0x08
[    1.303351] bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[    1.312133] bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[    1.321015] bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[    1.329246] bcma: bus1: Found rev 6 PMU (capabilities 0x108C2606)
[    1.330088] bcma: bus1: Using SPROM revision 0 provided by platform.
[    1.330132] bcma: bus1: PMU resource config unknown or not needed for device 0xA8D8
[    1.340850] bcma: bus1: Bus registered
[    1.346903] NET: Registered protocol family 10
[    1.357396] NET: Registered protocol family 17
[    1.362216] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.375148] 8021q: 802.1Q VLAN Support v1.8
[    1.393155] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
[    1.401759] Freeing unused kernel memory: 188K (803c1000 - 803f0000)
[    3.050931] init: Console is alive
[    3.054861] init: - watchdog -
[    4.254646] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.402007] usbcore: registered new interface driver usbfs
[    4.407764] usbcore: registered new interface driver hub
[    4.413517] usbcore: registered new device driver usb
[    4.427524] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.437246] ehci-platform: EHCI generic platform driver
[    4.442860] ehci-platform ehci-platform.0: EHCI Host Controller
[    4.449006] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[    4.457485] ehci-platform ehci-platform.0: irq 5, io mem 0x18004000
[    4.479401] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[    4.487835] hub 1-0:1.0: USB hub found
[    4.492481] hub 1-0:1.0: 2 ports detected
[    4.502125] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.510967] ohci-platform: OHCI generic platform driver
[    4.516448] ohci-platform ohci-platform.0: Generic Platform OHCI controller
[    4.523735] ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
[    4.532182] ohci-platform ohci-platform.0: irq 5, io mem 0x18009000
[    4.595330] hub 2-0:1.0: USB hub found
[    4.600124] hub 2-0:1.0: 2 ports detected
[    4.608697] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.626861] init: - preinit -
[    5.011347] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    5.263503] random: procd: uninitialized urandom read (4 bytes read, 9 bits of entropy available)
[    6.414938] random: jshn: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    6.608349] random: jshn: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    6.731613] random: jshn: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.012119] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.018248] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[    8.569470] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.576495] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   10.681655] jffs2: notice: (375) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   10.705445] mount_root: switching to jffs2 overlay
[   10.759409] urandom-seed: Seeding with /etc/urandom.seed
[   10.971431] procd: - early -
[   10.974613] procd: - watchdog -
[   11.730144] procd: - watchdog -
[   11.734119] procd: - ubus -
[   11.756070] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
[   11.789743] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
[   11.799846] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
[   11.809088] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
[   11.819720] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
[   11.828937] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
[   11.840154] procd: - init -
[   13.039395] kmodloader: loading kernel modules from /etc/modules.d/*
[   13.065020] tun: Universal TUN/TAP device driver, 1.6
[   13.070278] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   13.085691] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   13.145711] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[   13.153955] Backport generated by backports.git backports-20160324-13-g24da7d3c
[   13.171588] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.193691] nf_conntrack version 0.5.0 (949 buckets, 3796 max)
[   13.317055] xt_time: kernel timezone is -0000
[   13.325369] usbcore: registered new interface driver cdc_ether
[   13.427171] PPP generic driver version 2.4.2
[   13.436494] NET: Registered protocol family 24
[   13.450675] rndis_host 1-1:1.0 usb0: register 'rndis_host' at usb-ehci-platform.0-1, RNDIS device, 02:5b:53:31:37:31
[   13.461807] usbcore: registered new interface driver rndis_host
[   13.922244] brcmsmac bcma0:1: mfg 4bf core 812 rev 17 class 0 irq 3
[   13.928938] ieee80211 phy0: wl0: brcms_b_attach: Unsupported Broadcom board type (0xb4cf) or revision level (0x0)
[   13.939483] ieee80211 phy0: wl0: brcms_b_attach: failed with err 15
[   13.945869] ieee80211 phy0: wl0: brcms_c_attach: failed with err 15
[   13.952317] ieee80211 phy0: brcmsmac: attach() failed with code 15
[   13.958605] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[   13.964536] brcmsmac bcma1:1: mfg 4bf core 812 rev 23 class 0 irq 6
[   13.971222] bcma: bus1: Switched to core: 0x812
[   13.971613] ieee80211 phy1: wl0: brcms_b_attach: Unsupported Broadcom board type (0xb4cf) or revision level (0x0)
[   13.982136] ieee80211 phy1: wl0: brcms_b_attach: failed with err 15
[   13.988517] ieee80211 phy1: wl0: brcms_c_attach: failed with err 15
[   13.994965] ieee80211 phy1: brcmsmac: attach() failed with code 15
[   14.001311] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[   14.026333] kmodloader: done loading kernel modules from /etc/modules.d/*
[   24.261412] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.286504] device eth0.1 entered promiscuous mode
[   24.291519] device eth0 entered promiscuous mode
[   24.312573] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   24.442951] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   25.639559] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   25.699543] br-lan: port 1(eth0.1) entered forwarding state
[   25.705336] br-lan: port 1(eth0.1) entered forwarding state
[   25.711336] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   25.764246] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   27.699340] br-lan: port 1(eth0.1) entered forwarding state
[   61.049212] random: nonblocking pool is initialized

00:01.0 Network controller: Broadcom Limited BCM43224/5 Wireless Network Adapter (rev 01)
	Subsystem: Broadcom Limited BCM43224/5 Wireless Network Adapter
	Flags: bus master, fast devsel, latency 0, IRQ 6
	Memory at 08000000 (64-bit, non-prefetchable) [size=16385]
	Memory at <unassigned> (32-bit, non-prefetchable) [size=2]
	Memory at <unassigned> (32-bit, non-prefetchable) [size=2]
	Memory at <unassigned> (32-bit, non-prefetchable) [size=2]
	Memory at <unassigned> (32-bit, non-prefetchable) [size=2]
	Expansion ROM at <unassigned> [disabled] [size=2]
	Capabilities: [40] Power Management version 3
	Capabilities: [58] Vendor Specific Information: Len=78 <?>
	Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [d0] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [13c] Virtual Channel
	Capabilities: [160] Device Serial Number 00-00-00-ff-ff-00-00-00
	Capabilities: [16c] Power Budgeting <?>
	Kernel driver in use: bcma-pci-bridge


25.06.2017868WebsiteBug ReportVery LowLowSnapshot directory contains stray/obsolete directoriesTrunkUnconfirmed Task Description

Please remove obsolete directories in the snapshot directory (packages)

aarch64_armv8-a/
arm_cortex-a53_neon-vfpv4/
arm_cortex-a7/
i386_geode/
powerpc_440/


25.06.2017867Base systemFeature RequestVery LowLowmvebu: Should be split different arches, current (Armad...TrunkUnconfirmed Task Description

The older SoCs such as Armada XP and 370 only supports vfpv3-d16 while 385 and newer does complete vfpv3 and neon. This hampers performance of newer SoCs quite a bit and makes little sense not to split these since we already build vfpv3+neon binaries. While neon-vfpv4 exists, neon-vfpv3 doesn’t and for some reason it’s just called neon in GCC (which translates to arm_cortex-a9_neon in LEDE for this SoC family). Source: https://lists.linaro.org/pipermail/linaro-toolchain/2016-July/005826.html

Showing tasks 1301 - 1350 of 1430 Page 27 of 29<<First - 25 - 26 - 27 - 28 - 29 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing