OpenWrt/LEDE Project

Welcome to the OpenWrt/LEDE Project bug reporting and issue tracking system

Problems to be reported here are for the OpenWrt/LEDE Project targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt/LEDE Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to lede-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeverity  descSummaryReported InStatus
30.03.20192211Base systemBug ReportVery LowLowIncrease UniElec U7621-06-256M-16M SPI frequency to 50M...TrunkUnconfirmed Task Description

According to the datasheet, the flash chip on the UniElec U7621-06-256M-16M board, MX25L12805D, is rated to support 33MHz for READ instructions and 50MHz for FAST_READ instructions.

31.03.20192213Base systemBug ReportVery LowLowLow 2.4 GHz throughput and TX level on XD3200TrunkUnconfirmed Task Description

Device: Yuncore XD3200
Version: OpenWrt 18.06.2
Steps to reproduce: Turn on 2.4 GHz radio and measure the TX signal level and data transfer speed.

Linkt to forum post with more info

“While I’m only getting 18-22MBit (TCP, AP>Client) with the XD3200, the UAP-AC-LITE is stable at 38-45MBit, with the ‘stock’ XD3200 QSDK firmware and proprietary atheros driver I’m getting stable 39-41MBit.

Client readings (AP SNR):
XD3200: -53 dBm
XD3200 QSDK: -41dBm
UAP-AC-LITE: -37dBm

AP readings (Client SNR):
XD3200: -48 dBm / -95 dBm (SNR 47)
XD3200 QSDK: -34 dBm / -95 dBm (SNR 61)
UAP-AC-LITE: -37 dBm / -95 dBm (SNR 58)”

31.03.20192214Base systemBug ReportVery LowLowblock-mount: wrong processing orderTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
x86 based release
- Software versions of OpenWrt/LEDE release, packages, etc.
OpenWRT 18.06.2
- Steps to reproduce

/etc/config/fstab:

config global
        option anon_swap '0'
        option anon_mount '0'
        option auto_swap '1'
        option auto_mount '1'
        option delay_root '5'
        option check_fs '0'

config mount
        option target '/mnt/sda1'
        option uuid '57f8f4bc-abf4-655f-bf67-946fc0f9f25b'
        option enabled '0'

config mount
        option target '/mnt/sda2'
        option uuid '57f8f4bc-abf4-655f-bf67-946fc0f9f25b'
        option enabled '0'

config swap
        option uuid '76a17421-4317-40d4-b62e-d6510627334e'
        option label 'swap'
        option enabled '1'
        option device '/dev/sda4'

config mount
        option uuid '84eefd86-9cd3-463a-aa70-6ac876fd4432'
        option label 'home'
        option device '/dev/sda5'
        option fstype 'ext4'
        option target '/home'
        option enabled '1'
        option enabled_fsck '1'
        option options 'rw,sync,delalloc,block_validity'

config mount
        option uuid '439af06e-a586-4ded-9ab6-7703aff9853f'
        option label 'srv'
        option device '/dev/sda6'
        option fstype 'ext4'
        option target '/srv'
        option enabled '1'
        option enabled_fsck '1'
        option options 'rw,sync,delalloc,block_validity'

config mount
        option uuid '041c1481-07b9-48ac-b89c-46da429872b9'
        option label 'setup'
        option device '/dev/sda7'
        option fstype 'ext4'
        option target '/etc/setup'
        option enabled '1'
        option enabled_fsck '1'
        option options 'rw,sync,delalloc,block_validity'

config mount
        option uuid '8c9aea45-352f-4428-8805-a69445d4b1a4'
        option label 'ext'
        option device '/dev/sda8'
        option fstype 'ext4'
        option options 'rw,sync'
        option target '/srv/ext'
        option enabled_fsck '1'
        option enabled '0'

# uci show fstab

fstab.@global[0]=global
fstab.@global[0].anon_swap='0'
fstab.@global[0].anon_mount='0'
fstab.@global[0].auto_swap='1'
fstab.@global[0].auto_mount='1'
fstab.@global[0].delay_root='5'
fstab.@global[0].check_fs='0'
fstab.@mount[0]=mount
fstab.@mount[0].target='/mnt/sda1'
fstab.@mount[0].uuid='57f8f4bc-abf4-655f-bf67-946fc0f9f25b'
fstab.@mount[0].enabled='0'
fstab.@mount[1]=mount
fstab.@mount[1].target='/mnt/sda2'
fstab.@mount[1].uuid='57f8f4bc-abf4-655f-bf67-946fc0f9f25b'
fstab.@mount[1].enabled='0'
fstab.@swap[0]=swap
fstab.@swap[0].uuid='76a17421-4317-40d4-b62e-d6510627334e'
fstab.@swap[0].label='swap'
fstab.@swap[0].enabled='1'
fstab.@swap[0].device='/dev/sda4'
fstab.@mount[2]=mount
fstab.@mount[2].uuid='84eefd86-9cd3-463a-aa70-6ac876fd4432'
fstab.@mount[2].label='home'
fstab.@mount[2].device='/dev/sda5'
fstab.@mount[2].fstype='ext4'
fstab.@mount[2].target='/home'
fstab.@mount[2].enabled='1'
fstab.@mount[2].enabled_fsck='1'
fstab.@mount[2].options='rw,sync,delalloc,block_validity'
fstab.@mount[3]=mount
fstab.@mount[3].uuid='439af06e-a586-4ded-9ab6-7703aff9853f'
fstab.@mount[3].label='srv'
fstab.@mount[3].device='/dev/sda6'
fstab.@mount[3].fstype='ext4'
fstab.@mount[3].target='/srv'
fstab.@mount[3].enabled='1'
fstab.@mount[3].enabled_fsck='1'
fstab.@mount[3].options='rw,sync,delalloc,block_validity'
fstab.@mount[4]=mount
fstab.@mount[4].uuid='041c1481-07b9-48ac-b89c-46da429872b9'
fstab.@mount[4].label='setup'
fstab.@mount[4].device='/dev/sda7'
fstab.@mount[4].fstype='ext4'
fstab.@mount[4].target='/etc/setup'
fstab.@mount[4].enabled='1'
fstab.@mount[4].enabled_fsck='1'
fstab.@mount[4].options='rw,sync,delalloc,block_validity'
fstab.@mount[5]=mount
fstab.@mount[5].uuid='8c9aea45-352f-4428-8805-a69445d4b1a4'
fstab.@mount[5].label='ext'
fstab.@mount[5].device='/dev/sda8'
fstab.@mount[5].fstype='ext4'
fstab.@mount[5].options='rw,sync'
fstab.@mount[5].target='/srv/ext'
fstab.@mount[5].enabled_fsck='1'
fstab.@mount[5].enabled='1'

/dev/sda8 ⇒ /srv/ext is mounted before /dev/sda6 ⇒ /srv

# block info

/dev/sda1: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" VERSION="1.0" MOUNT="/boot" TYPE="ext4"
/dev/sda2: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" VERSION="1.0" MOUNT="/" TYPE="ext4"
/dev/sda4: UUID="76a17421-4317-40d4-b62e-d6510627334e" LABEL="swap" VERSION="1" TYPE="swap"
/dev/sda5: UUID="84eefd86-9cd3-463a-aa70-6ac876fd4432" LABEL="home" VERSION="1.0" MOUNT="/home" TYPE="ext4"
/dev/sda6: UUID="439af06e-a586-4ded-9ab6-7703aff9853f" LABEL="srv" VERSION="1.0" MOUNT="/srv" TYPE="ext4"
/dev/sda7: UUID="041c1481-07b9-48ac-b89c-46da429872b9" LABEL="setup" VERSION="1.0" MOUNT="/etc/setup" TYPE="ext4"
/dev/sda8: UUID="8c9aea45-352f-4428-8805-a69445d4b1a4" LABEL="ext" VERSION="1.0" MOUNT="/srv/ext" TYPE="ext4"

# mount

/dev/root on / type ext4 (rw,noatime,block_validity,delalloc,barrier,user_xattr)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/sda1 on /boot type ext4 (rw,noatime,block_validity,delalloc,barrier,user_xattr)
/dev/sda1 on /boot type ext4 (rw,noatime,block_validity,delalloc,barrier,user_xattr)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
/dev/sda7 on /etc/setup type ext4 (rw,sync,relatime,data=ordered)
/dev/sda5 on /home type ext4 (rw,sync,relatime,data=ordered)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
/dev/sda8 on /srv/ext type ext4 (rw,sync,relatime,data=ordered)
/dev/sda6 on /srv type ext4 (rw,sync,relatime,data=ordered)

# df -h

Filesystem                Size      Used Available Use% Mounted on
/dev/root                 7.9G     11.1M      7.8G   0% /
tmpfs                   121.8M     60.0K    121.7M   0% /tmp
/dev/sda1               256.0M      3.6M    247.3M   1% /boot
/dev/sda1               256.0M      3.6M    247.3M   1% /boot
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/sda7               975.9M      1.3M    907.4M   0% /etc/setup
/dev/sda5                 1.9G      1.5M      1.8G   0% /home
/dev/sda8                 2.6G      4.1M      2.5G   0% /srv/ext
/dev/sda6                 2.6G      4.1M      2.5G   0% /srv

Mounted manually with good order:

/dev/root on / type ext4 (rw,noatime,block_validity,delalloc,barrier,user_xattr)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/sda1 on /boot type ext4 (rw,noatime,block_validity,delalloc,barrier,user_xattr)
/dev/sda1 on /boot type ext4 (rw,noatime,block_validity,delalloc,barrier,user_xattr)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
/dev/sda7 on /etc/eynola type ext4 (rw,sync,relatime,data=ordered)
/dev/sda5 on /home type ext4 (rw,sync,relatime,data=ordered)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
/dev/sda6 on /srv type ext4 (rw,relatime,data=ordered)
/dev/sda8 on /srv/ext type ext4 (rw,relatime,data=ordered)

Filesystem                Size      Used Available Use% Mounted on
/dev/root                 7.9G     11.1M      7.8G   0% /
tmpfs                   121.8M     64.0K    121.7M   0% /tmp
/dev/sda1               256.0M      3.6M    247.3M   1% /boot
/dev/sda1               256.0M      3.6M    247.3M   1% /boot
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/sda7               975.9M      1.3M    907.4M   0% /etc/eynola
/dev/sda5                 1.9G      1.5M      1.8G   0% /home
/dev/sda6                 2.6G      4.1M      2.5G   0% /srv
/dev/sda8               975.9M      1.3M    907.4M   0% /srv/ext

and then /dev/sda6 is available through /srv and /dev/sda8 through /srv/ext

I tried the following things in /etc/config/fstab for sda6 and sda8

  only specify mount[x].uuid=
  only specify mount[x].device=
  only specify mount[x].label=
  inverse config mount section order between sda6 and sda8

but sda8 is always mounted before sda6

In which order are processed the mount order from the /etc/config/fstab ?
It does not seems to follow the mount[$idx] order.

Kind Regards

02.04.20192217Base systemBug ReportVery LowLowGet all zero Mac address when tagged port VLAN between ...TrunkUnconfirmed Task Description
 
I have two routers running the latest OpenWrt master trunk version. The first works as router(with dhcp/dns) and another works as pure AP(without dns/dhcp). So far it works fine.

Because I need a guest wifi network, so I added one vlan setting between router and AP with port tagged(VLAN-ID=17), after that, the AP device can not get correct routers’s MAC address(it’s all ZERO!)

The arp command shows output as following:


root@OpenWrt:/tmp# arp
IP address       HW type     Flags       HW address            Mask     Device
192.168.10.1     0x1         0x0         00:00:00:00:00:00     *        eth0.1
192.168.10.206   0x1         0x2         3c:xx:xx:xx:xx:e3     *        eth0.1
root@OpenWrt:/tmp# uname -a
Linux OpenWrt 4.14.107 #0 SMP Mon Mar 25 10:09:12 2019 mips GNU/Linux`

After I give it the corrct MAC address with ‘ip neigh’ command, it also fails when ping to gateway.

root@OpenWrt:/tmp# ip neigh change   192.168.10.1 lladdr 1C:xx:xx:xx:9B:xx nud permanent dev eth0.1
root@OpenWrt:/tmp# arp
IP address       HW type     Flags       HW address            Mask     Device
192.168.10.1     0x1         0x6         1c:xx:xx:xx:9b:xx     *        eth0.1
192.168.10.206   0x1         0x2         3c:xx:xx:xx:xx:e3     *        eth0.1

root@OpenWrt:/tmp# ping 192.168.10.1
PING 192.168.10.1 (192.168.10.1): 56 data bytes
^C
--- 192.168.10.1 ping statistics ---
10 packets transmitted, 0 packets received, 100% packet loss

My router type is newifi d2 and TL-WR2041n.
I am sure that it works fine with vlan-guest-network setting in previous version of OpenWrt.


04.04.20192221PackagesBuild FailureVery LowLowbuilding grub on 32 bit host failsTrunkUnconfirmed Task Description

The build for x86 stops at the following step:

make[8]: Entering directory '/home/lars/opennet/git/firmware/openwrt/build_dir/hostpkg/grub-2.02/grub-core'
i486-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -I. -I..  -Wall -W  -DGRUB_MACHINE_PCBIOS=1 -DGRUB_MACHINE=I386_PC -m32 -nostdinc -isystem /home/lars/opennet/git/firmware/openwrt/staging_dir/toolchain-i386_pentium4_gcc-7.4.0_musl/lib/gcc/i486-openwrt-linux-musl/7.4.0/include -I../include -I../include -DGRUB_FILE=\"lib/i386/relocator64.S\" -I. -I. -I.. -I.. -I../include -I../include -I../grub-core/lib/libgcrypt-grub/src/    -I/home/lars/opennet/git/firmware/openwrt/staging_dir/host/include -I/home/lars/opennet/git/firmware/openwrt/staging_dir/hostpkg/include -I/home/lars/opennet/git/firmware/openwrt/staging_dir/target-i386_pentium4_musl/host/include -D_FILE_OFFSET_BITS=64 -g  -m32 -msoft-float -DGRUB_FILE=\"lib/i386/relocator64.S\" -I. -I. -I.. -I.. -I../include -I../include -I../grub-core/lib/libgcrypt-grub/src/ -DASM_FILE=1    -O2 -I/home/lars/opennet/git/firmware/openwrt/staging_dir/host/include -I/home/lars/opennet/git/firmware/openwrt/staging_dir/hostpkg/include -I/home/lars/opennet/git/firmware/openwrt/staging_dir/target-i386_pentium4_musl/host/include -MT lib/i386/relocator_module-relocator64.o -MD -MP -MF lib/i386/.deps-core/relocator_module-relocator64.Tpo -c -o lib/i386/relocator_module-relocator64.o `test -f 'lib/i386/relocator64.S' || echo './'`lib/i386/relocator64.S
lib/i386/relocator64.S: Assembler messages:
lib/i386/relocator64.S:66: Error: unknown pseudo-op: `.code64'
lib/i386/relocator64.S:74: Error: bad register name `%rax'
lib/i386/relocator64.S:98: Error: bad register name `%rax'
lib/i386/relocator64.S:132: Error: bad register name `%rip)'
make[8]: *** [Makefile:28991: lib/i386/relocator_module-relocator64.o] Error 1
make[8]: Leaving directory '/home/lars/opennet/git/firmware/openwrt/build_dir/hostpkg/grub-2.02/grub-core'

The build host is a 32 bit Linux system.
This does not seem to happen on a 64 bit build host.

05.04.20192224Base systemBug ReportVery LowLowIf all WiFi networks are disabled, their names are not ...openwrt-18.06Unconfirmed Task Description

On the web interface, if no wireless network is enabled, only “Wireless is disabled” is shown for all wireless networks on the “Wireless” page, in the “Wireless overview” list. No network names and/or modes are shown.

If there is only a single wireless network configured, there is no problem to identify it to enable. But if there are more than a single network (for example, two APs and one client), and you need to selectively enable just one of them, you need to enter “Edit” step by step to find the appropriate network.

If at least one network is enabled, “Wireless is disabled” is shown for each disabled network as well as their names/modes.

Please modify the code to show all network names/modes even if all of them are disabled. It makes sense to always use the same list format, regardless of wireless adapter is enabled or disabled.

09.04.20192231Base systemBug ReportVery LowLowfstools: PREINIT calling of block extroot doesn't ackno...TrunkUnconfirmed Task Description

Extroot overlay mount fails on my ZyXEL NBG6817.

I can confirm this bug on both the latest stable 18.06.2, and the snapshot from the 4th of April.

 

When PREINIT calls ‘block extroot’, block fails to load the custom fstab from the eMMC ext4 overlay mounted at /tmp/overlay:

[...]
Thu Apr  4 12:01:51 2019 user.info kernel: [    3.508150] init: - preinit -
Thu Apr  4 12:01:51 2019 kern.info kernel: [    8.592387] EXT4-fs (loop0): recovery complete
Thu Apr  4 12:01:51 2019 kern.info kernel: [    8.595484] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
Thu Apr  4 12:01:51 2019 user.info kernel: [    8.598875] mount_root: loading kmods from internal overlay
Thu Apr  4 12:01:51 2019 user.info kernel: [    8.649260] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Thu Apr  4 12:01:51 2019 user.info kernel: [    8.663223] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Thu Apr  4 12:01:51 2019 user.info kernel: [   10.119972] block: attempting to load /etc/config/fstab
Thu Apr  4 12:01:51 2019 user.err kernel: [   10.120211] block: unable to load configuration (fstab: Entry not found)
Thu Apr  4 12:01:51 2019 user.err kernel: [   10.124238] block: no usable configuration
Thu Apr  4 12:01:51 2019 user.info kernel: [   10.132103] mount_root: switching to ext4 overlay
Thu Apr  4 12:01:51 2019 user.info kernel: [   10.292110] procd: - early -
Thu Apr  4 12:01:51 2019 user.info kernel: [   10.292264] procd: - watchdog -
Thu Apr  4 12:01:51 2019 user.info kernel: [   10.988093] procd: - watchdog -
Thu Apr  4 12:01:51 2019 user.info kernel: [   10.988475] procd: - ubus -
Thu Apr  4 12:01:51 2019 user.info kernel: [   11.046160] procd: - init -
[...]

Unrelated dmesg entries omitted, full log here:
https://gist.github.com/knuddelknoedel/2985ce7777a0263fbc22a02f8ef5307c

Custom modules are loaded with the correct overlay /tmp/overlay/upper prefix by libfstools, however the forked ‘block extroot’ process behaves differently when searching for /etc/config/fstab configuration.

Steps to reproduce:

  1. Flash any current openwrt sysupgrade image on a device where the rootfs+overlay don’t reside on MTD storage
  2. Configure an appropriate /overlay uci fstab extroot entry as specified in the respective wiki documentation
  3. Reboot

Further notes: adding /etc/config/fstab with the desired /overlay entry to the sysupgrade squashfs image before flashing allows block to successfully find the uci fstab config, however the mounting of the therein configured /overlay mount still fails.

13.04.20192235Base systemBug ReportVery LowLowWhen filtering the packages list in LuCI then adding or...openwrt-18.06Unconfirmed Task Description

Observed the issue on Archer C7 v2 running 18.06.01

When filtering the package list in LuCI then adding or removing a packages, the filter is reset, and the user has to filter again if they want to add or remove more packages.

Let’s say that you want to add ddns support. So you filter by “ddns” and you get a lit of the packages that match the filter. When you install one of them, the filter is reset and the full list of the packages is displayed, so you have to apply the filter again if you want to ad more packages.

The same happens when you remove packages.

Ideal situation is that the filter doesn’t reset, and that the scroll position through the list isn’t maintained as well.


15.04.20192239Base systemBug ReportVery LowLowInternet LED on W8970 Not Working (18.06-SNAPSHOT r7737...openwrt-18.06Unconfirmed Task Description

I compiled from sources 18.06-SNAPSHOT r7737-6ac061f319 and internet LED not working properly. When i restart router it’s not working. The trigger is set to netdev and the device is set to pppoe-wan.

config led 'led_internet'
        option name 'internet'
        option sysfs 'tdw89x0:green:internet'
        option trigger 'netdev'
        option mode 'link tx rx'
        option dev 'pppoe-wan'
        option default '0'

If i restart led service (/etc/init.d/led start) it works ok, but if i restart the network interfaces pppoe-wan the diode goes out until i restart again the led service.


18.04.20192241Base systemBug ReportVery LowLowRegression for dnsmasq config option add_wan_fqdnTrunkUnconfirmed Task Description

When dnsmasq’s init script is invoked via the boot process, the UCI config option add_wan_fqdn is no longer effective. The content of /tmp/hosts/dhcp.<sect> only contains:

# auto-generated config file from /etc/config/dhcp

If dnsmasq is restarted after the network is up, it works as expected.

This is caused by commit ecd954d5302b2d135005ca68c206bb2d544b0bde, which adds some conditions to the service triggers, one being the ignore option must be disabled.
The add_wan_fqdn option only takes effect when the ignore option is enabled.

The commit message suggests the condition was added in reverse:

if the value of the ignore option is set to 0, then the corresponding interface trigger is not installed. Otherwise, if the ignore option value is 1, then procd_add_interface_trigger is called which adds the interface trigger.

I’ve confirmed that reversing the condition fixes the problem, and have attached a patch for this.

21.04.20192248PackagesFeature RequestVery LowLowuhttpd: implement ubus event listener via Server-Sent E...TrunkWaiting on reporter Task Description

Usecase:
As a web developer I would benefit from having the possibility to send events from the server to the browser so the browser can react to it dynamically.

The proposed implementation is the leanest possible.

A SSE (Server-Sent Event) is a simple protocol on top of basic http polling to send messages from the http server to the browser for the purpose of instant notifications.
It comes implemented in all major browsers, including mobile.

If paired with `ubus listen` or `ubus monitor`, a seamless integration with the ubus pipeline could be implemented.

We tried to implement it by adding an option in this line of code but got stuck in our lack of corutine mechanisms and how uhttpd works.

The difference with the call and list options is that this one should be long-lived and progressive, preventing the dreaded polling from the web (also, better us of resources, more elegant implementation, etc).

As an example, a very basic implementation of a SSE server in php:

<?php
header('Content-Type: text/event-stream');
header('Cache-Control: no-cache');

echo "data: \"hello world\"" . PHP_EOL;
echo PHP_EOL;
echo "data: \"goodbye world\"" . PHP_EOL;
echo PHP_EOL;
ob_flush();
flush();

An example of a very basic implementation of a SSE client in HTML:

<html>
	<body></body>
	<script>
	var source = new EventSource("demo_sse.php");
	source.onmessage = function(event) {
		document.getElementById("result").innerHTML += event.data + "<br>";
	}; 
	</script>
</html>
23.04.20192250Base systemBug ReportVery LowLowNo wireless interface on D-Link DSL-2740B F1TrunkUnconfirmed Task Description

- Device problem occurs on D-Link DSL-2740B F1
- Software versions of OpenWrt/LEDE: OpenWrt 18.06.3 and Trunk

After flashing openwrt there are no wireless interfaces.
More info at:
https://forum.openwrt.org/t/openwrt-18-06-1-dont-show-wifi-wireless-network-and-dont-work/23482/31 https://forum.openwrt.org/t/lost-wireless-option-in-network-panel-after-reset-of-dsl-2740b/27618

[    0.000000] Linux version 4.14.111 (massy@massy-linux) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r9885-524810ce6d)) #0 Thu Apr 18 20:34:19 2019
[    0.000000] Detected Broadcom 0x6328 CPU revision b0
[    0.000000] CPU frequency is 320 MHz
[    0.000000] 64MB of RAM installed
[    0.000000] board_bcm963xx: Boot address 0xb8000000
[    0.000000] board_bcm963xx: CFE version: 1.0.37-106.5
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0002a075 (Broadcom BMIPS4350)
[    0.000000] board: board name: AW4339U
[    0.000000] MIPS: machine is D-Link DSL-2740B/DSL-2741B rev F1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[    0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]  Normal  [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]  node  0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 804e6f20, node_mem_map 81005720
[    0.000000]  Normal zone: 128 pages used for memmap
[    0.000000]  Normal zone: 0 pages reserved
[    0.000000]  Normal zone: 16384 pages, LIFO batch:3
[    0.000000] random: get_random_bytes called from start_kernel+0x80/0x480 with crng_init=0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc:
[li]0[/li]
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 58348K/65536K available (3856K kernel code, 184K rwdata, 920K rodata, 1304K init, 207K bss, 7188K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 256
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945377789 ns
[    0.000018] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421772796ns
[    0.008126] Calibrating delay loop... 319.74 BogoMIPS (lpj=639488)
[    0.050493] pid_max: default: 32768 minimum: 301
[    0.055750] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.062606] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.078151] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.088199] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.094661] pinctrl core: initialized pinctrl subsystem
[    0.101164] NET: Registered protocol family 16
[    0.352138] registering PCI controller with io_map_base unset
[    0.397311] PCI host bridge to bus 0000:00
[    0.401573] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x10ffffff]
[    0.408636] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.415622] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.422610] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.430822] pci 0000:00:00.0: [14e4:6328] type 01 class 0x060400
[    0.430966] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.431429] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.440015] pci 0000:01:00.0: [168c:ff1c] type 00 class 0x020000
[    0.440110] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    0.440312] pci 0000:01:00.0: supports D1
[    0.440331] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[    0.440765] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.440802] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[    0.440868] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[    0.447901] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f0ffff 64bit]
[    0.455441] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.460538] pci 0000:00:00.0:  bridge window [mem 0x10f00000-0x10ffffff]
[    0.468904] clocksource: Switched to clocksource MIPS
[    0.476851] NET: Registered protocol family 2
[    0.483129] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.490419] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.497017] TCP: Hash tables configured (established 1024 bind 1024)
[    0.504119] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.510235] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.517260] NET: Registered protocol family 1
[    0.521862] pci 0000:01:00.0: invalid calibration data
[    0.527166] PCI: CLS 0 bytes, default 16
[    0.541917] Crashlog allocated RAM at address 0x3f00000
[    0.551270] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[    0.570122] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.576154] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.614846] io scheduler noop registered
[    0.618908] io scheduler deadline registered (default)
[    0.625678] bcm6328-pinctrl 10000080.pin-controller: registered at mmio b0000080
[    0.634782] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[    0.641659] 10000100.serial: ttyS0 at MMIO 0x10000100 (irq = 36, base_baud = 1562500) is a bcm63xx_uart
[    0.651409] console [ttyS0] enabled
[    0.658560] bootconsole [early0] disabled
[    0.684650] m25p80 spi1.0: mx25l6405d (8192 Kbytes)
[    0.690467] 4 fixed-partitions partitions found on MTD device spi1.0
[    0.697027] Creating 4 MTD partitions on "spi1.0":
[    0.701962] 0x000000000000-0x000000010000 : "cfe"
[    0.708498] 0x000000010000-0x0000007d0000 : "linux"
[    0.719371] parser_imagetag: rootfs: CFE image tag found at 0x0 with version 6, board type AW4339U
[    0.728645] parser_imagetag: Partition 0 is kernel offset 100 and length 1948a4
[    0.736161] parser_imagetag: Partition 1 is rootfs offset 1949a4 and length 62b65c
[    0.743949] parser_imagetag: Spare partition is offset 560004 and length 25fffc
[    0.751546] 2 bcm963xx-imagetag partitions found on MTD device linux
[    0.758100] Creating 2 MTD partitions on "linux":
[    0.762943] 0x000000000100-0x0000001949a4 : "kernel"
[    0.769911] 0x0000001949a4-0x0000007c0000 : "rootfs"
[    0.776600] mtd: device 3 (rootfs) set to be root filesystem
[    0.786344] 1 squashfs-split partitions found on MTD device rootfs
[    0.792769] 0x000000560000-0x0000007c0000 : "rootfs_data"
[    0.800013] 0x0000007d0000-0x0000007e0000 : "cal_data"
[    0.806986] 0x0000007e0000-0x000000800000 : "nvram"
[    0.815813] libphy: Fixed MDIO Bus: probed
[    0.861967] b53_common: found switch: BCM63xx, rev 0
[    0.867705] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.879137] NET: Registered protocol family 10
[    0.898611] Segment Routing with IPv6
[    0.902586] NET: Registered protocol family 17
[    0.907252] 8021q: 802.1Q VLAN Support v1.8
[    0.921452] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    0.946284] Freeing unused kernel memory: 1304K
[    0.950952] This architecture does not have kernel memory protection.
[    0.968954] random: fast init done
[    2.161318] init: Console is alive
[    2.165205] init: - watchdog -
[    4.118171] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.300774] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.310078] init: - preinit -
[    5.753281] random: jshn: uninitialized urandom read (4 bytes read)
[    5.853839] random: jshn: uninitialized urandom read (4 bytes read)
[    6.104203] random: jshn: uninitialized urandom read (4 bytes read)
[    7.158715] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.164974] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[    7.171876] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[    7.180372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[    7.313446] urandom_read: 2 callbacks suppressed
[    7.313460] random: procd: uninitialized urandom read (4 bytes read)
[    8.161072] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  10.778473] jffs2: notice: (364) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (2 unchecked, 1 orphan) and 3 of xref (1 dead, 0 orphan) found.
[  10.798238] mount_root: switching to jffs2 overlay
[  10.870423] overlayfs: upper fs does not support tmpfile.
[  10.892702] urandom-seed: Seeding with /etc/urandom.seed
[  11.134674] procd: - early -
[  11.137979] procd: - watchdog -
[  11.893798] procd: - watchdog -
[  11.897578] procd: - ubus -
[  12.039719] random: ubusd: uninitialized urandom read (4 bytes read)
[  12.153115] random: ubusd: uninitialized urandom read (4 bytes read)
[  12.160660] random: ubusd: uninitialized urandom read (4 bytes read)
[  12.170116] procd: - init -
[  12.762559] kmodloader: loading kernel modules from /etc/modules.d/*
[  12.783453] tun: Universal TUN/TAP device driver, 1.6
[  12.920841] gre: GRE over IPv4 demultiplexor driver
[  12.931260] ip_gre: GRE over IPv4 tunneling driver
[  12.960508] ip6_tables: (C) 2000-2006 Netfilter Core Team
[  12.981808] Mirror/redirect action on
[  13.010683] u32 classifier
[  13.013531]    input device check on
[  13.017267]    Actions configured
[  13.055615] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[  13.099776] Loading modules backported from Linux version v4.19.32-0-g3a2156c839c7
[  13.107613] Backport generated by backports.git v4.19.32-1-0-g1c4f7569
[  13.137507] ip_tables: (C) 2000-2006 Netfilter Core Team
[  13.621957] xt_time: kernel timezone is -0000
[  13.928446] PPP generic driver version 2.4.2
[  13.951839] PPP MPPE Compression module registered
[  13.965547] NET: Registered protocol family 24
[  14.252600] kmodloader: done loading kernel modules from /etc/modules.d/*
[  17.533085] random: crng init done
[  17.536535] random: 1 urandom warning(s) missed due to ratelimiting
[  33.485194] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[  33.509892] br-lan: port 1(eth0.1) entered blocking state
[  33.515487] br-lan: port 1(eth0.1) entered disabled state
[  33.521654] device eth0.1 entered promiscuous mode
[  33.526610] device eth0 entered promiscuous mode
[  33.583926] br-lan: port 1(eth0.1) entered blocking state
[  33.589518] br-lan: port 1(eth0.1) entered forwarding state
[  33.595584] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[  34.498177] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
25.04.20192258PackagesBug ReportVery LowLowtcpdump: bus error on 18.06.2openwrt-18.06Waiting on reporter Task Description

Hey,

On a Mikrotik RB450G (mips_24kc) running OpenWRT 18.06.2, when I try to run tcpdump I get a Bus error. Output from strace:

root@firewall:~# strace tcpdump
execve("/usr/sbin/tcpdump", ["tcpdump"], 0x7fb548b0 /* 13 vars */) = 0
set_thread_area(0x77c57dc0)             = 0
set_tid_address(0x77c50d28)             = 2843
open("/etc/ld-musl-mips-sf.path", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib/libpcap.so.1", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/local/lib/libpcap.so.1", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libpcap.so.1", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fcntl64(3, F_SETFD, FD_CLOEXEC)         = 0
fstat64(3, {st_mode=S_IFREG|0644, st_size=62976, ...}) = 0
read(3, "\177ELF\1\2\1\0\0\0\0\0\0\0\0\0\0\3\0\10\0\0\0\1\0\0=\360\0\0\0004"..., 936) = 936
mmap2(NULL, 245760, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x77b70000
mmap2(0x77baa000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x2a000) = 0x77baa000
--- SIGBUS {si_signo=SIGBUS, si_code=BUS_ADRERR, si_addr=0x77bab4b8} ---
+++ killed by SIGBUS +++
Bus error
root@firewall:~# 

Something dodgy with the pcap library?

04.05.20192267WebsiteFeature RequestVery LowLowdownloads.openwrt.org: Upgrade from Debian 8 to 9, offe...TrunkUnconfirmed Task Description

The webserver on downloads.openwrt.org currently only offers AES, Camellia and 3DES ciphersuites for HTTPS connections, since the server is running Debian 8, nginx 1.6.2 and OpenSSL 1.0.1t.

An upgrade to Debian 9 with nginx 1.10.3 and OpenSSL 1.1.0j would be appreciated since this would enable the webserver to offer ChaCha20 ciphersuites, which offer a huge performance increase for embedded devices without AES-NI or similar hardware acceleration for AES.

06.05.20192268PackagesBug ReportVery LowLow[dnsmasq/odhcpd] uninstalling dnsmasq is deleting setti...openwrt-18.06Unconfirmed Task Description

utilising odhcpd for ipv4/6 queries led to uninstalling dnsmsaq from the system and in due course the file /etc/config/dhcp got wiped. Said file however holds the settings for odhcpd as well and thus is expected to be retained.

Since the /etc/config/dhcp holds the settings for both, dnsmasq and odhcpd, it should not be wiped if either packages gets uninstalled.

 


06.05.20192272Base systemBug ReportVery LowLowSlow throughput from LAN to WANTrunkUnconfirmed Task Description

Supply the following if possible:
- TP-Link Archer A7
- Snapshot
- Connect via Wireless. Place WAN port in VLAN 1 (LAN) and connect WAN port to internet router LAN side. Throughput is fine. Move WAN port to VLAN 2 (WAN) with the same configuration and throughput drops to ~150mbps.

08.05.20192275Base systemBug ReportVery LowLowDropbear: compilation fails with Elliptic curve cryptog...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
at least on
x86
x86_64
Generic
and
Broadcom BCM47xx/53xx (MIPS)
Generic
Linksys E3000 v1

- Software versions of OpenWrt/LEDE release, packages, etc.
Openwrt master (commit bc85640cdc9de180da00fde1532584abf19db365)
- Steps to reproduce
build OpenWRT with Dropbear/ECC enabled

 

See attached txt for full error log. It looks like a missing library.

14.05.20192283Base systemBug ReportMediumLowm76: crash when creating an additional monitor interfac...TrunkAssigned Task Description

OpenWrt: b65a270c851ee422f26a0af10c879ebb87cb8f76
mt76: 4.14.108+2019-03-27-a11b6734-1

While debugging an unicast wifi bug, I tried to create a mon0 interface
iw wlan0 interface add mon0 type monitor.

Modules:	mt7603e@830f0000+87a0	mt76@83128000+6060	mac80211@83080000+6a240	iptable_raw@83111000+2e0	iptable_nat@831c5000+340	iptable_mangle@83bd7000+400	iptable_filter@83135000+360	ipt_REJECT@831c3000+3a0	ipt_MASQUERADE@8311f000+280	ipt_ECN@83bca000+560	ip_tables@831c0000+2650	cfg80211@83000000+35fb0	xt_time@83bbd000+6c0	xt_tcpudp@83baa000+6e0	xt_tcpmss@831ac000+400	xt_statistic@8311d000+320	xt_state@83151000+2a0xt_recent@831ae000+1bf0	xt_nat@83bd0000+5e0	xt_multiport@83bd6000+4e0	xt_mark@83134000+280	xt_mac@83bd3000+240	xt_limit@8315f000+480	xt_length@83125000+2a0	xt_hl@83132000+300	xt_helper@83126000+340	xt_ecn@83127000+520	xt_dscp@8313c000+3c0	xt_conntrack@83ba8000+8e0	xt_connmark@8311c000+420	xt_connlimit@83136000+1110	xt_connbytes@83bcd000+620	xt_comment@83117000+1c0	xt_TCPMSS@83bd2000+800	xt_REDIRECT@83bce000+2a0	xt_LOG@83bcc000+280	xt_HL@83bc9000+520	xt_FLOWOFFLOAD@83bc7000+ab0	xt_DSCP@8313b000+5c0	xt_CT@8313d000+9e0	xt_CLASSIFY@83131000+220	x_tables@83bc0000+30f0	nf_reject_ipv4@83130000+780	nf_nat_redirect@8311e000+560	nf_nat_masquerade_ipv4@83bac000+590	nf_conntrack_ipv4@83bb8000+1100	nf_nat_ipv4@83bba000+c70	nf_nat@83120000+2250	nf_log_ipv4@83bad000+dc0	nf_log_common@83116000+980	nf_flow_table_hw@83bbe000+820	nf_flow_table@83ba4000+3310	nf_defrag_ipv4@83153000+3e0	nf_conntrack_rtcache@83112000+8a0	compat@83118000+1700	act_connmark@83113000+850	nf_conntrack@83100000+d2c0	sch_tbf@8314e000+1680	sch_ingress@8314a000+4a0	sch_htb@83ba0000+36d0	sch_hfsc@83158000+39e0	em_u32@831ba000+200	cls_u32@83154000+2330	cls_tcindex@8314c000+15c0	cls_route@831be000+1540	cls_matchall@831a3000+a20	cls_fw@83144000+1000	cls_flow@83148000+1780	cls_basic@831bb000+d00	act_skbedit@831b4000+9f0	act_mirred@831b5000+e50	ifb@831a0000+be0	l2tp_ip@8316e000+1410	l2tp_eth@831a4000+a00	l2tp_netlink@831a6000+1f90	l2tp_core@831a8000+3110	udp_tunnel@83b99000+920	leds_gpio@83b4f000+b20	gpio_button_hotplug@83b50000+1900
<6>[    0.191477] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.197077] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.203431] NET: Registered protocol family 1
<7>[    0.207612] PCI: CLS 0 bytes, default 32
<4>[    0.210849] Crashlog allocated RAM at address 0x3f00000
<6>[    0.217463] workingset: timestamp_bits=30 max_order=14 bucket_order=0
<6>[    0.229138] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.234765] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<6>[    0.254072] io scheduler noop registered
<6>[    0.257804] io scheduler deadline registered (default)
<6>[    0.263580] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
<6>[    0.270756] console [ttyS0] disabled
<6>[    0.274257] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
<6>[    0.282984] console [ttyS0] enabled
<6>[    0.289970] bootconsole [early0] disabled
<3>[    0.298544] cacheinfo: Failed to find cpu0 device node
<4>[    0.303799] cacheinfo: Unable to detect cache hierarchy for CPU 0
<6>[    0.310628] spi-mt7621 10000b00.spi: sys_freq: 193333333
<6>[    0.329261] m25p80 spi0.0: s25fl064k (8192 Kbytes)
<5>[    0.334207] 4 fixed-partitions partitions found on MTD device spi0.0
<5>[    0.340643] Creating 4 MTD partitions on "spi0.0":
<5>[    0.345526] 0x000000000000-0x000000020000 : "boot"
<5>[    0.351255] 0x000000020000-0x0000007c0000 : "firmware"
<5>[    0.359405] 2 tplink-fw partitions found on MTD device firmware
<5>[    0.365482] Creating 2 MTD partitions on "firmware":
<5>[    0.370527] 0x000000000000-0x00000014f3a3 : "kernel"
<5>[    0.376451] 0x00000014f3a4-0x0000007a0000 : "rootfs"
<5>[    0.382277] mtd: device 3 (rootfs) set to be root filesystem
<5>[    0.389534] 1 squashfs-split partitions found on MTD device rootfs
<5>[    0.395888] 0x000000390000-0x0000007a0000 : "rootfs_data"
<5>[    0.402220] 0x0000007c0000-0x0000007d0000 : "config"
<5>[    0.408051] 0x0000007d0000-0x000000800000 : "factory"
<6>[    0.414688] libphy: Fixed MDIO Bus: probed
<6>[    0.431000] rt3050-esw 10110000.esw: link changed 0x00
<6>[    0.437801] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
<6>[    0.447188] NET: Registered protocol family 17
<6>[    0.451831] 8021q: 802.1Q VLAN Support v1.8
<6>[    0.468953] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
<6>[    0.476929] Freeing unused kernel memory: 136K
<4>[    0.481474] This architecture does not have kernel memory protection.
<14>[    1.719920] init: Console is alive
<14>[    1.723707] init: - watchdog -
<5>[    2.267376] random: fast init done
<14>[    3.000227] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<14>[    3.073195] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[    3.091032] init: - preinit -
<6>[    4.256850] rt3050-esw 10110000.esw: link changed 0x00
<5>[    4.687762] random: procd: uninitialized urandom read (4 bytes read)
<13>[    4.780523] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
<12>[    4.822673] urandom-seed: Seed file not found (/etc/urandom.seed)
<14>[    4.918017] procd: - early -
<14>[    4.921055] procd: - watchdog -
<14>[    5.550307] procd: - watchdog -
<14>[    5.553880] procd: - ubus -
<5>[    5.600493] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[    5.667639] random: ubusd: uninitialized urandom read (4 bytes read)
<14>[    5.675598] procd: - init -
<14>[    6.002174] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[    6.011883] l2tp_core: L2TP core driver, V2.0
<6>[    6.017941] l2tp_netlink: L2TP netlink interface
<6>[    6.024375] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
<6>[    6.032295] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
<6>[    6.044769] Mirror/redirect action on
<6>[    6.141161] u32 classifier
<6>[    6.143986]     input device check on
<6>[    6.147693]     Actions configured
<6>[    6.239795] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
<6>[    6.260517] Loading modules backported from Linux version v4.19.23-0-g67d52fae61c1
<6>[    6.268272] Backport generated by backports.git v4.19.23-1-0-g480a925a
<6>[    6.488990] xt_time: kernel timezone is -0000
<6>[    6.514755] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    6.566528] mt76_wmac 10300000.wmac: ASIC revision: 76280001
<6>[    7.593554] mt76_wmac 10300000.wmac: Firmware Version: 20151201
<6>[    7.599575] mt76_wmac 10300000.wmac: Build Time: 20151201183641
<6>[    7.621350] mt76_wmac 10300000.wmac: firmware init done
<6>[    7.728549] rt3050-esw 10110000.esw: link changed 0x01
<7>[    7.792147] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<14>[    7.802137] kmodloader: done loading kernel modules from /etc/modules.d/*
<4>[    9.177342] urandom_read: 6 callbacks suppressed
<5>[    9.177353] random: jshn: uninitialized urandom read (4 bytes read)
<6>[   11.971477] rt3050-esw 10110000.esw: link changed 0x00
<6>[   15.521829] rt3050-esw 10110000.esw: link changed 0x01
<6>[   40.298153] rt3050-esw 10110000.esw: link changed 0x00
<6>[   43.783225] rt3050-esw 10110000.esw: link changed 0x01
<6>[   44.432507] device eth0 entered promiscuous mode
<6>[   50.910274] br-lan: port 1(eth0.1) entered blocking state
<6>[   50.915855] br-lan: port 1(eth0.1) entered disabled state
<6>[   50.921660] device eth0.1 entered promiscuous mode
<6>[   50.939619] br-lan: port 1(eth0.1) entered blocking state
<6>[   50.945176] br-lan: port 1(eth0.1) entered forwarding state
<6>[   51.073380] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.080911] device eth0.1 left promiscuous mode
<6>[   51.085686] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.170750] br-lan: port 1(eth0.1) entered blocking state
<6>[   51.176313] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.182108] device eth0.1 entered promiscuous mode
<6>[   51.234695] br-lan: port 1(eth0.1) entered blocking state
<6>[   51.240185] br-lan: port 1(eth0.1) entered forwarding state
<6>[   54.284409] br-lan: port 2(wlan0) entered blocking state
<6>[   54.290155] br-lan: port 2(wlan0) entered disabled state
<6>[   54.295937] device wlan0 entered promiscuous mode
<6>[   55.227079] br-lan: port 2(wlan0) entered blocking state
<6>[   55.232548] br-lan: port 2(wlan0) entered forwarding state
<6>[   65.499313] device wlan0 left promiscuous mode
<6>[   65.504001] br-lan: port 2(wlan0) entered disabled state
<6>[   67.659749] br-lan: port 2(wlan0) entered blocking state
<6>[   67.665252] br-lan: port 2(wlan0) entered disabled state
<6>[   67.670929] device wlan0 entered promiscuous mode
<6>[   67.675848] br-lan: port 2(wlan0) entered blocking state
<6>[   67.681236] br-lan: port 2(wlan0) entered forwarding state
<6>[   67.687263] br-lan: port 2(wlan0) entered disabled state
<6>[   70.171904] br-lan: port 2(wlan0) entered blocking state
<6>[   70.177326] br-lan: port 2(wlan0) entered forwarding state
<4>[   74.063128] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
<4>[   74.076565] jffs2_build_filesystem(): unlocking the mtd device... 
<4>[   74.076626] done.
<4>[   74.084920] jffs2_build_filesystem(): erasing all blocks after the end marker... 
<5>[   75.341427] random: crng init done
<4>[   89.806667] done.
<5>[   89.808667] jffs2: notice: (2808) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
<4>[   90.097054] overlayfs: upper fs does not support tmpfile.
<6>[95491.758861] device wlan0 left promiscuous mode
<6>[95491.763556] br-lan: port 2(wlan0) entered disabled state
<6>[95496.123525] br-lan: port 2(wlan0) entered blocking state
<6>[95496.128998] br-lan: port 2(wlan0) entered disabled state
<6>[95496.134779] device wlan0 entered promiscuous mode
<6>[95496.139678] br-lan: port 2(wlan0) entered blocking state
<6>[95496.145064] br-lan: port 2(wlan0) entered forwarding state
<6>[95496.151480] br-lan: port 2(wlan0) entered disabled state
<6>[95497.434477] br-lan: port 2(wlan0) entered blocking state
<6>[95497.439926] br-lan: port 2(wlan0) entered forwarding state
<6>[181891.461089] device wlan0 left promiscuous mode
<6>[181891.465866] br-lan: port 2(wlan0) entered disabled state
<6>[181895.862824] br-lan: port 2(wlan0) entered blocking state
<6>[181895.868387] br-lan: port 2(wlan0) entered disabled state
<6>[181895.874262] device wlan0 entered promiscuous mode
<6>[181897.223872] br-lan: port 2(wlan0) entered blocking state
<6>[181897.229417] br-lan: port 2(wlan0) entered forwarding state
<6>[268291.119138] device wlan0 left promiscuous mode
<6>[268291.123910] br-lan: port 2(wlan0) entered disabled state
<6>[268296.605568] br-lan: port 2(wlan0) entered blocking state
<6>[268296.611162] br-lan: port 2(wlan0) entered disabled state
<6>[268296.616932] device wlan0 entered promiscuous mode
<6>[268298.034899] br-lan: port 2(wlan0) entered blocking state
<6>[268298.040440] br-lan: port 2(wlan0) entered forwarding state
<6>[354690.783285] device wlan0 left promiscuous mode
<6>[354690.788153] br-lan: port 2(wlan0) entered disabled state
<6>[354695.110340] br-lan: port 2(wlan0) entered blocking state
<6>[354695.115924] br-lan: port 2(wlan0) entered disabled state
<6>[354695.121790] device wlan0 entered promiscuous mode
<6>[354696.496658] br-lan: port 2(wlan0) entered blocking state
<6>[354696.502208] br-lan: port 2(wlan0) entered forwarding state
<6>[441090.473174] device wlan0 left promiscuous mode
<6>[441090.478041] br-lan: port 2(wlan0) entered disabled state
<6>[441094.831626] br-lan: port 2(wlan0) entered blocking state
<6>[441094.837188] br-lan: port 2(wlan0) entered disabled state
<6>[441094.843056] device wlan0 entered promiscuous mode
<6>[441094.848063] br-lan: port 2(wlan0) entered blocking state
<6>[441094.853538] br-lan: port 2(wlan0) entered forwarding state
<6>[441094.860044] br-lan: port 2(wlan0) entered disabled state
<6>[441096.143580] br-lan: port 2(wlan0) entered blocking state
<6>[441096.149126] br-lan: port 2(wlan0) entered forwarding state
<6>[527490.172730] device wlan0 left promiscuous mode
<6>[527490.177478] br-lan: port 2(wlan0) entered disabled state
<6>[527494.541946] br-lan: port 2(wlan0) entered blocking state
<6>[527494.547517] br-lan: port 2(wlan0) entered disabled state
<6>[527494.553391] device wlan0 entered promiscuous mode
<6>[527495.938895] br-lan: port 2(wlan0) entered blocking state
<6>[527495.944394] br-lan: port 2(wlan0) entered forwarding state
<1>[592589.839671] CPU 0 Unable to handle kernel paging request at virtual address 000002c8, epc == 830af554, ra == 83082384
<4>[592589.850591] Oops[#1]:
<4>[592589.852986] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.108 #0
<4>[592589.859074] task: 803cb430 task.stack: 803c6000
<4>[592589.863748] $ 0   : 00000000 80410000 00000000 00000000
<4>[592589.869140] $ 4   : 00000000 838cbd80 00000000 00000000
<4>[592589.874531] $ 8   : 838cb1c8 82f18516 00000010 43420000
<4>[592589.879922] $12   : 087f0000 00000000 000a9a0e 00000004
<4>[592589.885312] $16   : 838cbd80 00000000 830ecbc0 830ecbc0
<4>[592589.890703] $20   : 83b61bf0 830f73ac 00000001 00000000
<4>[592589.896093] $24   : 00000010 801bcbe0                  
<4>[592589.901484] $28   : 803c6000 83807e18 830ede88 83082384
<4>[592589.906876] Hi    : 005a1ac2
<4>[592589.909878] Lo    : ef14c145
<4>[592589.912889] epc   : 830af554 0x830af554 [mac80211@83080000+0x6a240]
<4>[592589.919330] ra    : 83082384 0x83082384 [mac80211@83080000+0x6a240]
<4>[592589.925764] Status: 1100e403	KERNEL EXL IE 
<4>[592589.930096] Cause : 00800008 (ExcCode 02)
<4>[592589.934243] BadVA : 000002c8
<4>[592589.937246] PrId  : 00019655 (MIPS 24KEc)
<4>[592589.941392] Modules linked in: mt7603e mt76 mac80211 iptable_raw iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY x_tables nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_log_common nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache compat act_connmark nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ifb
<4>[592590.013247]  l2tp_ip l2tp_eth l2tp_netlink l2tp_core udp_tunnel leds_gpio gpio_button_hotplug
<4>[592590.021995] Process swapper (pid: 0, threadinfo=803c6000, task=803cb430, tls=00000000)
<4>[592590.030101] Stack : 83807e7c 0000008a 00000000 838cbd80 838cbd80 83082384 00000050 830ecbc0
<4>[592590.038670]         83b61bf0 830f73ac 830ed4e0 00000000 838cb180 00000000 00000000 830ecbc0
<4>[592590.047239]         83b61bf0 830f73ac 830ed4e0 00000001 830ecbc0 830adb78 00000cfc 0000033f
<4>[592590.055808]         8381b800 00000080 00000000 00000000 00060036 00000000 830ed4e0 83b61bf0
<4>[592590.064376]         00000004 00000003 00000006 830f73f0 83807ee0 80058f30 803dfc40 00000003
<4>[592590.072945]         ...
<4>[592590.075510] Call Trace:
<4>[592590.075556] [<83082384>] 0x83082384 [mac80211@83080000+0x6a240]
<4>[592590.084214] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.090146] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.096068] [<830adb78>] 0x830adb78 [mac80211@83080000+0x6a240]
<4>[592590.102173] [<830f73f0>] 0x830f73f0 [mt7603e@830f0000+0x87a0]
<4>[592590.108088] [<80058f30>] 0x80058f30
<4>[592590.111724] [<830b4d80>] 0x830b4d80 [mac80211@83080000+0x6a240]
<4>[592590.117809] [<80009e70>] 0x80009e70
<4>[592590.121449] [<830f7548>] 0x830f7548 [mt7603e@830f0000+0x87a0]
<4>[592590.127377] [<8002d078>] 0x8002d078
<4>[592590.130998] [<80009e70>] 0x80009e70
<4>[592590.134619] [<80351a20>] 0x80351a20
<4>[592590.138240] [<8005d978>] 0x8005d978
<4>[592590.141866] [<80058f30>] 0x80058f30
<4>[592590.145491] [<80009e70>] 0x80009e70
<4>[592590.149109] 
<4>[592590.150701] Code: 27bdffe8  afbf0014  afb00010 <8c9002c8> 8caa00a4  1080001e  8e090438  8e030044  0123402a 
<4>[592590.160690] 
<4>[592590.162335] ---[ end trace 25bbd90279e222f9 ]---

===================================
15.05.20192285Base systemBug ReportVery LowLowKERNEL_IN_UBI=0 is ineffective in image-commands.mkopenwrt-18.06Assigned Task Description

device: marvell kirkwood 88f6281
system: openwrt 18.06.2

I want to get a *.factory.bin without kernel, but it is ineffective to set KERNEL_IN_UBI=0 in openwrt-18.06.2/target/linux/kirkwood/image/Makefile.

I got the wrong place in openwrt-18.06.2/include/image-commands.mk, line:177, it should be

$(if $(filter $(KERNEL_IN_UBI), 1), –kernel $(IMAGE_KERNEL))

Maybe it is the same wrong in line 176, but i’m not sure, because i don’t find where UBOOTENV_IN_UBI is used.

16.05.20192287Base systemBug ReportVery LowLowJumbo frames not working on MT7530TrunkUnconfirmed Task Description
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='SNAPSHOT'
DISTRIB_REVISION='r9992-86fd8cb'
DISTRIB_TARGET='ramips/mt7620'
DISTRIB_ARCH='mipsel_24kc'
DISTRIB_DESCRIPTION='OpenWrt SNAPSHOT r9992-86fd8cb'
DISTRIB_TAINTS=''
system type		: MediaTek MT7620A ver:2 eco:6
machine			: Edimax BR-6478AC v2
processor		: 0
cpu model		: MIPS 24KEc V5.0
BogoMIPS		: 385.84
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 32
extra interrupt vector	: yes
hardware watchpoint	: yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa			: mips1 mips2 mips32r1 mips32r2
ASEs implemented	: mips16 dsp
Options implemented	: tlb 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit nan_legacy nan_2008 perf
shadow register sets	: 1
kscratch registers	: 0
package			: 0
core			: 0
VCED exceptions		: not available
VCEI exceptions		: not available
root@ap-02:~# ifconfig eth0 mtu 1500
root@ap-02:~# ifconfig eth0 mtu 1501
ifconfig: SIOCSIFMTU: Invalid argument
root@ap-02:~# ifconfig eth0 mtu 9000
ifconfig: SIOCSIFMTU: Invalid argument
root@ap-02:~# ifconfig eth0 mtu 1400
root@ap-02:~# 

Should support 9k frames (https://files.iczoom.com/hjiczoom/images/public/basicproduct/1478829119360_MT7530W.pdf)

24.05.20192292KernelFeature RequestVery LowLowSupport AWS ENA NICTrunkUnconfirmed Task Description

Hi,

it’s possible to provide the ena kernel driver as separat module/package? The latest generation of EC2 requires the usage of ENA and this driver is inside the official linux long time ago.

Kernel Module: https://github.com/torvalds/linux/tree/master/drivers/net/ethernet/amazon/ena

ENA documentation: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/enhanced-networking-ena.html

29.05.20192298PackagesBug ReportVery LowLowigmpproxy should restart on WAN ifup instead of using a...openwrt-18.06Unconfirmed Task Description

I’m using igmpproxy for IPTV on openwrt-18.06.2-ar71xx-generic-tl-wr1043nd-v1-squashfs-sysupgrade.bin

In the past I’ve been bitten by a version of this bug:

https://dev.archive.openwrt.org/ticket/20443#

Basically igmpproxy will not always start or continue to work when the wan network does ifup/ifdown.

I solved it with the solution listed there:

““” /etc/hotplug.d/iface/40-igmpproxy with this content

#!/bin/sh
[ “$INTERFACE” = wan ] && [ “$ACTION” = ifup ] && /etc/init.d/igmpproxy restart

and run

/etc/init.d/igmpproxy disable
““”

That seems like a better default, maybe even restarting on any ifup and not just wan, to make it fullproof against weirder setups with interfaces named differently.

31.05.20192303Base systemBug ReportVery LowLowwpad-mesh crashes with encryption enabledTrunkWaiting on reporter Task Description

device is wdr3600

DISTRIB_ID=’OpenWrt’ DISTRIB_RELEASE=’18.06.2’ DISTRIB_REVISION=’r7676-cddd7b4c77’ DISTRIB_TARGET=’ar71xx/generic’ DISTRIB_ARCH=’mips_24kc’ DISTRIB_DESCRIPTION=’OpenWrt 18.06.2 r7676-cddd7b4c77’ DISTRIB_TAINTS=’’ r7676-cddd7b4c77

the rom is built with package builder:
PROFILE=tl-wdr3600-v1 PACKAGES=”luci luci-app-sqm conntrack kmod-usb2 kmod-usb-storage block-mount kmod-fs-ext4 e2fsprogs badblocks openssh-sftp-server luci-app-ddns libustream-openssl luci-app-openvpn openvpn-openssl -wpad-mini wpad-mesh-wolfssl”

my log is full of:
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.369096] ————[ cut here ]———— Fri May 31 10:15:26 2019 kern.warn kernel: [15298.373874] WARNING: CPU: 0 PID: 9955 at backports-2017-11-01/net/mac80211/wpa.c:431 0×87708734 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.385196] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_netlink nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY slhc nfnetlink nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat sch_cake nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.457266] sch_hfsc sch_ingress ledtrig_usbport ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ifb tun usb_storage ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc16 crc32c_generic crypto_hash
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.484154] CPU: 0 PID: 9955 Comm: kworker/u2:1 Tainted: G W 4.9.152 #0
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.492028] Workqueue: phy1 0x876ec0a0 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.498054] Stack : 00000123 863d3af8 877cade0 800a931c 00000000 00000000 00000000 00000000
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.506616] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.515169] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.523713] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.532259] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.540812] ...
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.543314] Call Trace:
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.545666] [<800a931c>] 0x800a931c
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.549209] [<8006ad4c>] 0x8006ad4c
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.552762] [<8006ad4c>] 0x8006ad4c
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.556319] [<8007fd84>] 0x8007fd84
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.559868] [<87708734>] 0×87708734 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.565911] [<8007fe20>] 0x8007fe20
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.569458] [<87708734>] 0×87708734 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.575519] [<876e8ef8>] 0x876e8ef8 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.581343] [<87727ee0>] 0x87727ee0 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.587439] [<8772ab3c>] 0x8772ab3c [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.593621] [<876e96e4>] 0x876e96e4 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.599368] [<87717930>] 0×87717930 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.605451] [<876e97a8>] 0x876e97a8 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.611215] [<80065ea0>] 0x80065ea0
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.614822] [<87717490>] 0×87717490 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.620903] [<876e9e1c>] 0x876e9e1c [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.626721] [<876ea320>] 0x876ea320 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.632529] [<876ea410>] 0x876ea410 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.638353] [<87729fcc>] 0x87729fcc [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.644409] [<87727250>] 0×87727250 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.650470] [<8772bcc4>] 0x8772bcc4 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.656499] [<8027eb6c>] 0x8027eb6c
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.660132] [<8772d630>] 0x8772d630 [mac80211@87700000+0x5fc20]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.666162] [<802ad588>] 0x802ad588
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.669702] [<80450000>] 0×80450000 Fri May 31 10:15:26 2019 kern.warn kernel: [15298.673256] [<80082e74>] 0x80082e74
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.676808] [<8008274c>] 0x8008274c
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.680384] [<876ec15c>] 0x876ec15c [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.686137] [<80082940>] 0×80082940 Fri May 31 10:15:26 2019 kern.warn kernel: [15298.689697] [<876ec088>] 0x876ec088 [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.695462] [<800829f8>] 0x800829f8
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.699010] [<87682e5c>] 0x87682e5c [ath9k_hw@87680000+0×51020]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.705047] [<876ec16c>] 0x876ec16c [ath9k@876e0000+0×16370]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.710847] [<80092c70>] 0x80092c70
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.714427] [<800927f0>] 0x800927f0
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.718005] [<80093a7c>] 0x80093a7c
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.721542] [<80093788>] 0×80093788 Fri May 31 10:15:26 2019 kern.warn kernel: [15298.725094] [<80093788>] 0×80093788 Fri May 31 10:15:26 2019 kern.warn kernel: [15298.728651] [<80098220>] 0×80098220 Fri May 31 10:15:26 2019 kern.warn kernel: [15298.732204] [<80098144>] 0×80098144 Fri May 31 10:15:26 2019 kern.warn kernel: [15298.735759] [<80065ef8>] 0x80065ef8
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.739305]
Fri May 31 10:15:26 2019 kern.warn kernel: [15298.740822] —[ end trace 07a56879b3fe468f ]—

And wifi connectivity on radio0 is gone. There is another router on the mesh (WR740v4 with openwrt 18.06.2). I have tried with wpad-mesh-openssl but results were the same.

This mesh was configured about one week ago and was working fine for a few days, but since yesterday is show this behaviour. A reboot on this router does not solve the problem.

Configuration is as follows:
/etc/config/network:

config interface 'lan'
        option type 'bridge'
        option ifname 'eth0.1'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '10.10.0.1'

/etc/config/wireless:

config wifi-device 'radio0'
        option type 'mac80211'
        option hwmode '11g'
        option path 'platform/ar934x_wmac'
        option country 'BR'
        option legacy_rates '1'
        option txpower '17'
        option channel '9'
        option htmode 'HT40'
        option disabled 0

config wifi-iface 'default_radio0'
        option device 'radio0'
        option ifname 'wlan0'
        option network 'lan'
        option mode 'ap'
        option ssid 'AP'
        option wds '0'
        option encryption 'psk2/aes'
        option key 'password'
        option wpa_disable_eapol_key_retries '1'
        option disabled 0

config wifi-iface 'mesh0'
        option network 'lan'
        option ifname 'mesh0'
        option device 'radio0'
        option mode 'mesh'
        option mesh_id 'meshid'
        option encryption 'psk2/aes'
        option key 'password'
        option mesh_fwding '1'
        option disabled 0
31.05.20192305KernelBug ReportVery LowLowmt76: kernel panic when using mkfs.ext2 on usb drive.TrunkAssigned Task Description

Device: MT7621 Xiaomi Mi Router 3G
Version: OpenWrt SNAPSHOT, r10114+2-a1210f8
Steps to reproduce:
Run

mkfs.ext2 -L data /dev/sda2

Can reproduce consistently. The hard drive is powered from an external power supply so it’s not an electrical issue.

<0>[  608.342771] usercopy: kernel memory exposure attempt detected from c0d173c1 (kmalloc-256) (71 bytes)
<4>[  608.352010] Kernel bug detected[#1]:
<4>[  608.355602] CPU: 0 PID: 2505 Comm: dropbear Not tainted 4.14.121 #0
<4>[  608.361842] task: 8fdeea40 task.stack: 8b21a000
<4>[  608.366346] $ 0   : 00000000 00000001 00000058 00000000
<4>[  608.371558] $ 4   : 8121133c 8121133c 81215e78 00006990
<4>[  608.376766] $ 8   : 00000000 0000015b 00000007 00000000
<4>[  608.381975] $12   : 00000000 80590000 00053af3 00000000
<4>[  608.387183] $16   : c0d173c1 00000047 00000001 c0d17408
<4>[  608.392392] $20   : 8dbbfe00 8b21be3c 8b21bdf0 c0d17000
<4>[  608.397601] $24   : 00000003 802a2780                  
<4>[  608.402810] $28   : 8b21a000 8b21bd38 006b1029 80115df0
<4>[  608.408019] Hi    : 00000124
<4>[  608.410880] Lo    : 74e58000
<4>[  608.413763] epc   : 80115df0 __check_object_size+0x1b0/0x1e0
<4>[  608.419395] ra    : 80115df0 __check_object_size+0x1b0/0x1e0
<4>[  608.425022] Status: 11008403	KERNEL EXL IE 
<4>[  608.429192] Cause : 50800024 (ExcCode 09)
<4>[  608.433179] PrId  : 0001992f (MIPS 1004Kc)
<4>[  608.437250] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat fuse ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 nfsv4 nfsd nfs rpcsec_gss_krb5 auth_rpcgss oid_registry tun loop vfat fat lockd sunrpc grace dns_resolver
<4>[  608.508454]  dm_mirror dm_region_hash dm_log dm_crypt dm_mod dax nls_utf8 nls_iso8859_1 nls_cp437 sha1_generic md5 hmac ecb des_generic cts cbc usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common crc32c_generic
<4>[  608.535207] Process dropbear (pid: 2505, threadinfo=8b21a000, task=8fdeea40, tls=77fd2eb8)
<4>[  608.543426] Stack : 00000000 80522e50 80517aa4 c0d173c1 80521640 00000047 00000000 00000047
<4>[  608.551758]         c0d173c1 c0d17000 000013c6 80292008 7fa9f4fc 7fa9f47c 00000000 00000000
<4>[  608.560089]         8dbbfe00 c0d17000 7fffffff 006b1029 00010000 00000000 00000000 c0d17000
<4>[  608.568421]         8dbbfe68 80294e84 8b21bdb8 8b21bdbc 8b21bdc0 8b21bdc4 00000001 00000000
<4>[  608.576752]         006b102b 006b102a 8dbbff74 0000137f c0d19258 00000000 00000000 8b21bea0
<4>[  608.585084]         ...
<4>[  608.587519] Call Trace:
<4>[  608.589961] [<80115df0>] __check_object_size+0x1b0/0x1e0
<4>[  608.595268] [<80292008>] copy_from_read_buf+0x90/0x1b0
<4>[  608.600384] [<80294e84>] n_tty_read+0x6f4/0x8b4
<4>[  608.604895] [<8028dd78>] tty_read+0xac/0x11c
<4>[  608.609153] [<8011a89c>] __vfs_read+0x28/0x158
<4>[  608.613576] [<8011aa9c>] vfs_read+0xd0/0x17c
<4>[  608.617828] [<8011b01c>] SyS_read+0x58/0xc4
<4>[  608.622004] [<80019578>] syscall_common+0x34/0x58
<4>[  608.626690] Code: 02003825  0c01d530  24842e5c <000c000d> 8fb30028  8fb20024  8fb10020  8fb0001c  03e00008 
<4>[  608.636415] 
<4>[  608.638435] ---[ end trace 1fd93e66459e17ad ]---
08.06.20192314Base systemBug ReportVery LowLowRandom crashes on ZBT-WG3526 (16M) and OpenWrt 18.06.2 ...openwrt-18.06Waiting on reporter Task Description

Supply the following if possible:
- Device problem occurs on
ZBT-WG3526 (16M)
https://openwrt.org/toh/hwdata/zbt/zbt_wg3526_16m

- Software versions of OpenWrt/LEDE release, packages, etc.
Firmware
http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt7621/openwrt-18.06.2-ramips-mt7621-zbt-wg3526-16M-squashfs-sysupgrade.bin

- Steps to reproduce
Not known

I’ve attached the full list of installed packages and the crashlog I managed to recover. Possible relevant highlight below from the crashlog.

Also attached is the backup archive generated, with sensitive bits redacted (ie passwords)

I love OpenWrt and can’t wait to have a non crashing router.

If anything else is needed please let me know.

Thanks!


11.06.20192315Base systemBug ReportVery LowLowUnaligned Instructions on AR71XX TargetsTrunkUnconfirmed Task Description

To reproduce install wpad-openssl-mesh
Enable wireless mesh

echo 2 > /sys/kernel/debug/mips/unaligned_action && sleep 10 && echo 0 >  /sys/kernel/debug/mips/unaligned_action

Kernel Stack Trace

[  344.065508] Call Trace:
[  344.068111] [<870d9b7c>] mesh_rx_plink_frame+0xed0/0x139c [mac80211]
[  344.074626] Code: 96c40002  9646000c  00451026 <96c30004> 9645000e  00862026  00441025  00651826  00431025
[  344.084628]
[  344.086166] CPU: 0 PID: 5 Comm: kworker/u2:0 Not tainted 4.14.123 #0
[  344.092833] Workqueue: phy1 ieee80211_ibss_leave [mac80211]
[  344.098609] task: 87c25600 task.stack: 87c3a000
[  344.103319] $ 0   : 00000000 00000001 00000000 00000000
[  344.108656] $ 4   : 00000000 0000c46e 000067a5 00000000
[  344.114057] $ 8   : 86e25464 00000001 00000004 873811e8
[  344.119433] $12   : ffffffff 00000000 00b00000 00000000
[  344.124806] $16   : 804f0000 8773f078 87315460 8773f082
[  344.130155] $20   : 8773f094 8773f0a9 000000b3 870e89e8
[  344.135485] $24   : 804ef040 870de528
[  344.140915] $28   : 87c3a000 87c3bcb8 870e8a14 870da454
[  344.146279] Hi    : 0004e2ca
[  344.149300] Lo    : b0250b0d
[  344.152383] epc   : 870da988 mesh_rx_path_sel_frame+0x658/0xb08 [mac80211]
[  344.159527] ra    : 870da454 mesh_rx_path_sel_frame+0x124/0xb08 [mac80211]
[  344.166543] Status: 1100dc03 KERNEL EXL IE
[  344.170825] Cause : 00800010 (ExcCode 04)
[  344.174894] BadVA : 8773f0a9
[  344.177829] PrId  : 0001974c (MIPS 74Kc)
[  344.181881] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp ath9k_hw ath qmi_wwan pptp pppox ppp_mppe ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY wireguard usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat cdc_wdm sch_cake nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc
[  344.254146]  em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport cryptodev xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip_gre gre ifb l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel ip_tunnel tun shortcut_fe_ipv6 shortcut_fe algif_skcipher algif_hash af_alg sha1_generic ecb authenc ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common mii aead cryptomgr crypto_null
[  344.326861]  crypto_hash
[  344.329502] Process kworker/u2:0 (pid: 5, threadinfo=87c3a000, task=87c25600, tls=00000000)
[  344.338022] Stack : 0000002f 870ac7f0 00000000 20000009 00000000 00000000 00000000 00000041
[  344.346622]         8717a780 804f0000 87315460 00000041 87380bc0 870b2d30 8717a780 8717a780
[  344.355242]         000000a0 00000000 00000000 802d09dc 8773f092 00000021 00000000 00000000
[  344.363839]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  344.372380]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  344.380888]         ...
[  344.383382] Call Trace:
[  344.386011] [<870da988>] mesh_rx_path_sel_frame+0x658/0xb08 [mac80211]
[  344.392801] [<870d5bb4>] ieee80211_mesh_rx_queued_mgmt+0x15c/0x164 [mac80211]
[  344.400279] [<87097164>] ieee80211_ibss_leave+0x80c/0x1888 [mac80211]
[  344.406922] [<870d5cd0>] ieee80211_mesh_work+0x114/0x2cc [mac80211]
[  344.413498] [<8009d280>] process_one_work+0x1f8/0x428
[  344.418706] [<8009d630>] worker_thread+0x180/0x548
[  344.423692] [<800a3a04>] kthread+0x134/0x13c
[  344.428075] [<80066db8>] ret_from_kernel_thread+0x14/0x1c
[  344.433622] Code: 26950015  2695001b  964508a0 <96a20000> 96a40002  964608a2  00451026  96a30004  964508a4
[  344.443591]
[  344.445124] CPU: 0 PID: 5 Comm: kworker/u2:0 Not tainted 4.14.123 #0
[  344.451809] Workqueue: phy1 ieee80211_ibss_leave [mac80211]
[  344.457609] task: 87c25600 task.stack: 87c3a000
[  344.462251] $ 0   : 00000000 00000001 0000c46e 00000000
[  344.467638] $ 4   : 00000000 0000c46e 000067a5 00000000
[  344.472982] $ 8   : 86e25464 00000001 00000004 873811e8
[  344.478319] $12   : ffffffff 00000000 00b00000 00000000
[  344.483642] $16   : 804f0000 8773f078 87315460 8773f082
[  344.489022] $20   : 8773f094 8773f0a9 000000b3 870e89e8
[  344.494355] $24   : 804ef040 870de528
[  344.499779] $28   : 87c3a000 87c3bcb8 870e8a14 870da454
[  344.505182] Hi    : 0004e2ca
[  344.508135] Lo    : b0250b0d
[  344.511216] epc   : 870da98c mesh_rx_path_sel_frame+0x65c/0xb08 [mac80211]
[  344.518315] ra    : 870da454 mesh_rx_path_sel_frame+0x124/0xb08 [mac80211]
[  344.525377] Status: 1100dc03 KERNEL EXL IE
[  344.529667] Cause : 00800010 (ExcCode 04)
[  344.533773] BadVA : 8773f0ab
[  344.536702] PrId  : 0001974c (MIPS 74Kc)
[  344.540711] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp ath9k_hw ath qmi_wwan pptp pppox ppp_mppe ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY wireguard usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat cdc_wdm sch_cake nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc
[  344.613009]  em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport cryptodev xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip_gre gre ifb l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel ip_tunnel tun shortcut_fe_ipv6 shortcut_fe algif_skcipher algif_hash af_alg sha1_generic ecb authenc ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common mii aead cryptomgr crypto_null
[  344.685675]  crypto_hash
[  344.688299] Process kworker/u2:0 (pid: 5, threadinfo=87c3a000, task=87c25600, tls=00000000)
[  344.696835] Stack : 0000002f 870ac7f0 00000000 20000009 00000000 00000000 00000000 00000041
[  344.705438]         8717a780 804f0000 87315460 00000041 87380bc0 870b2d30 8717a780 8717a780
[  344.714011]         000000a0 00000000 00000000 802d09dc 8773f092 00000021 00000000 00000000
[  344.722611]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  344.731207]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  344.739750]         ...
14.06.20192320OtherBug ReportVery LowLowu-Boot OpenWrt 18.06.2 on sama5d31 Unimplemented compre...TrunkUnconfirmed Task Description

Hi,
after building 18.06.2 OpenWrt version and his nand flash u-boot (U-Boot 2017.03-linux4sam_5.8 (Jan 30 2019 - 12:21:02 +0000)) when u-boot try to uncompress lzma kernel image the following error is reached

 

Uncompressing Kernel Image ... Unimplemented compression type 3

the log:

AT91Bootstrap 3.8.10 (Tue Jun 11 17:58:40 UTC 2019)

NAND: ONFI flash detected
NAND: Manufacturer ID: 0x2c Chip ID: 0xda
NAND: Page Bytes: 2048, Spare Bytes: 64
NAND: ECC Correctability Bits: 4, ECC Sector Bytes: 512
NAND: Disable On-Die ECC
NAND: Initialize PMECC params, cap: 4, sector: 512
NAND: Image: Copy 0xa0000 bytes from 0×40000 to 0x26f00000
NAND: Done to load image
<debug_uart>

U-Boot 2017.03-linux4sam_5.8 (Jan 30 2019 - 12:21:02 +0000)

CPU: SAMA5D31
Crystal frequency: 12 MHz CPU clock : 528 MHz Master clock : 132 MHz DRAM: 256 MiB
NAND: 256 MiB
MMC: Atmel mci: 0, Atmel mci: 1
In: serial@ffffee00
Out: serial@ffffee00
Err: serial@ffffee00
Net:
Error: ethernet@f0028000 address not set.
No ethernet found.
Hit any key to stop autoboot: 0

NAND read: device 0 offset 0×180000, size 0×80000 524288 bytes read: OK

NAND read: device 0 offset 0×200000, size 0×600000 6291456 bytes read: OK
## Booting kernel from Legacy Image at 22000000 ...

 Image Name:   ARM OpenWrt Linux-4.9.152
 Image Type:   ARM Linux Kernel Image (lzma compressed)
 Data Size:    3016433 Bytes = 2.9 MiB
 Load Address: 20008000
 Entry Point:  20008000
 Verifying Checksum ... OK

## Flattened Device Tree blob at 21000000

 Booting using the fdt blob at 0x21000000
 Uncompressing Kernel Image ... Unimplemented compression type 3

Checking into u-boot (make menuconfig) seems that lzma cannot be set , only LZ4 is provided.

Also the option to change compression type of the kernel do not work. I try to switch from default (gzip) to LZ4 but kernel uimage is always lzma compressed.

Could you provide some hint to unlock the situation ?

Another strange things is :

Error: ethernet@f0028000 address not set.
No ethernet found.

f0028000 is memory address of GMAC that is not provided in sama5d31 SoC but the curious is the next No ethernet found.

Does it mean that nor EMAC was found ?

Thanks in advance
Best
Fabio


18.06.20192327Base systemBug ReportMediumLow/boot mounted multiple timesTrunkNew Task Description

Supply the following if possible:
- Device problem occurs on- seen on x86 APU2 - may be others.
- Software versions of OpenWrt master
- Steps to reproduce - boot system

root@Router:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 14080 14080 0 100% /rom
tmpfs 2011892 156 2011736 0% /tmp
/dev/loop0 246016 15140 161244 9% /overlay
overlayfs:/overlay 246016 15140 161244 9% /
/dev/sda1 16112 4172 11616 26% /boot
/dev/sda1 16112 4172 11616 26% /boot
tmpfs 512 0 512 0% /dev
root@Router:/etc/config# block info
/dev/loop0: UUID=”cbbd153a-60b0-40e0-800e-b79833957b9f” VERSION=”1.12” MOUNT=”/overlay” TYPE=”f2fs” /dev/sda1: UUID=”57f8f4bc-abf4-655f-bf67-946fc0f9f25b” VERSION=”1.0” MOUNT=”/boot” TYPE=”ext4” /dev/sda2: UUID=”b9caa0dd-b7eb255f-2c2775da-3aa40e49” VERSION=”4.0” MOUNT=”/rom” TYPE=”squashfs” /dev/sda3: UUID=”e92b8416-fe49-409b-a4cf-c71476027159” VERSION=”1.12” MOUNT=”/mnt/sda3” TYPE=”f2fs” root@Router:/etc/config# cat /etc/config/fstab

config global

option anon_swap '0'
option anon_mount '0'
option auto_swap '1'
option auto_mount '1'
option delay_root '5'
option check_fs '1'

config mount

option target '/mnt/loop0'
option uuid 'dd87006a-ba8e-44f4-a40b-f2cb6181dc4e'
option enabled '0'

config mount

option target '/mnt/sda1'
option uuid '57f8f4bc-abf4-655f-bf67-946fc0f9f25b'
option enabled '0'

config mount

option target '/mnt/sda2'
option uuid '8a1c0748-3d6b7bd1-0192e5c4-7fe0165c'
option enabled '0'

config mount

option target '/mnt/sda3'
option uuid 'e92b8416-fe49-409b-a4cf-c71476027159'
option enabled '1'

root@Router:/etc/config# uname -a
Linux Router 4.14.126 #0 SMP Tue Jun 18 09:45:23 2019 x86_64 GNU/Linux


19.06.20192331Base systemFeature RequestVery LowLowPackage request: libbpf packageTrunkUnconfirmed Task Description

Needed for many types of eBPF usage: https://github.com/libbpf/libbpf

26.06.20192341Base systemFeature RequestVery LowLowFeature Request: nslookup - support SRV queriesAllUnconfirmed Task Description

Could support for SRV requests be added to the patch https://github.com/openwrt/openwrt/blob/master/package/utils/busybox/patches/230-add_nslookup_lede.patch

Currently I am working on setting up a service for freifunk which uses SRV records. Unfortunately I have to install bind-host and all it’s dependencies to make the DNS query. It would be great if the built-in busybox nslookup supported this.

@jow- seems to have done a bit of work on nslookup in the past.

Any support would be appreciated.

P

27.06.20192342Base systemBug ReportVery LowLowmt7621 "PCIE2 no card" error at cold bootTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

root@OpenWrt:~# cat /etc/*-release
NAME="OpenWrt"
VERSION="SNAPSHOT"
ID="openwrt"
ID_LIKE="lede openwrt"
PRETTY_NAME="OpenWrt SNAPSHOT"
VERSION_ID="snapshot"
HOME_URL="https://openwrt.org/"
BUG_URL="https://bugs.openwrt.org/"
SUPPORT_URL="https://forum.openwrt.org/"
BUILD_ID="r10327-a0e5ca4f35"
LEDE_BOARD="ramips/mt7621"
LEDE_ARCH="mipsel_24kc"
LEDE_TAINTS=""
LEDE_DEVICE_MANUFACTURER="OpenWrt"
LEDE_DEVICE_MANUFACTURER_URL="https://openwrt.org/"
LEDE_DEVICE_PRODUCT="Generic"
LEDE_DEVICE_REVISION="v0"
LEDE_RELEASE="OpenWrt SNAPSHOT r10327-a0e5ca4f35"

- Software versions of OpenWrt/LEDE release, packages, etc.

root@OpenWrt:~# opkg list-installed
base-files - 200-r10327-a0e5ca4f35
block-mount - 2019-03-28-ff1ded63-5
busybox - 1.31.0-1
dnsmasq - 2.80-13
dropbear - 2019.78-2
firewall - 2019-01-02-70f8785b-2
fstools - 2019-03-28-ff1ded63-5
fwtool - 1
getrandom - 2019-06-16-4df34a4d-2
hostapd-common - 2018-12-02-c2c6c01b-6
htop - 2.2.0-2
ip6tables - 1.8.2-3
iperf3 - 3.6-1
iptables - 1.8.2-3
iptables-mod-conntrack-extra - 1.8.2-3
iptables-mod-ipopt - 1.8.2-3
iw-full - 5.0.1-1
jshn - 2019-06-16-ecf56174-1
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 4.14.129-1-2c88b7be5bf978d41a9f6038dabdd3b4
kmod-ata-ahci - 4.14.129-1
kmod-ata-core - 4.14.129-1
kmod-cfg80211 - 4.14.129+4.19.32-1-2
kmod-crypto-crc32c - 4.14.129-1
kmod-crypto-hash - 4.14.129-1
kmod-fs-ext4 - 4.14.129-1
kmod-gpio-button-hotplug - 4.14.129-2
kmod-ifb - 4.14.129-1
kmod-ip6tables - 4.14.129-1
kmod-ipt-conntrack - 4.14.129-1
kmod-ipt-conntrack-extra - 4.14.129-1
kmod-ipt-core - 4.14.129-1
kmod-ipt-ipopt - 4.14.129-1
kmod-ipt-nat - 4.14.129-1
kmod-ipt-offload - 4.14.129-1
kmod-ipt-raw - 4.14.129-1
kmod-leds-gpio - 4.14.129-1
kmod-lib-crc-ccitt - 4.14.129-1
kmod-lib-crc16 - 4.14.129-1
kmod-mac80211 - 4.14.129+4.19.32-1-2
kmod-mmc - 4.14.129-1
kmod-mt76 - 4.14.129+2019-06-25-d680ab01-1
kmod-mt76-core - 4.14.129+2019-06-25-d680ab01-1
kmod-mt7603 - 4.14.129+2019-06-25-d680ab01-1
kmod-mt76x02-common - 4.14.129+2019-06-25-d680ab01-1
kmod-mt76x2 - 4.14.129+2019-06-25-d680ab01-1
kmod-mt76x2-common - 4.14.129+2019-06-25-d680ab01-1
kmod-nf-conntrack - 4.14.129-1
kmod-nf-conntrack6 - 4.14.129-1
kmod-nf-flow - 4.14.129-1
kmod-nf-ipt - 4.14.129-1
kmod-nf-ipt6 - 4.14.129-1
kmod-nf-nat - 4.14.129-1
kmod-nf-reject - 4.14.129-1
kmod-nf-reject6 - 4.14.129-1
kmod-nls-base - 4.14.129-1
kmod-ppp - 4.14.129-1
kmod-pppoe - 4.14.129-1
kmod-pppox - 4.14.129-1
kmod-sched-cake - 4.14.129+2019-03-12-057c7388-1
kmod-sched-core - 4.14.129-1
kmod-scsi-core - 4.14.129-1
kmod-sdhci-mt7620 - 4.14.129-1
kmod-slhc - 4.14.129-1
kmod-usb-core - 4.14.129-1
kmod-usb-storage - 4.14.129-1
kmod-usb-storage-uas - 4.14.129-1
kmod-usb3 - 4.14.129-1
libblobmsg-json - 2019-06-16-ecf56174-1
libc - 1.1.22-1
libelf1 - 0.176-2
libgcc1 - 7.4.0-1
libip4tc0 - 1.8.2-3
libip6tc0 - 1.8.2-3
libiwinfo-lua - 2019-06-12-1372f47e-1
libiwinfo20181126 - 2019-06-12-1372f47e-1
libjson-c4 - 0.13.1-1
libjson-script - 2019-06-16-ecf56174-1
libkmod - 20-1
liblua5.1.5 - 5.1.5-3
liblucihttp-lua - 2019-06-05-91c01c3c-1
liblucihttp0 - 2019-06-05-91c01c3c-1
libmnl0 - 1.0.4-2
libncurses6 - 6.1-4
libnl-tiny - 0.1-5
libpci - 3.6.2-3
libpthread - 1.1.22-1
librt - 1.1.22-1
libubox20170601 - 2019-06-16-ecf56174-1
libubus-lua - 2018-10-06-221ce7e7-1
libubus20170705 - 2018-10-06-221ce7e7-1
libuci20130104 - 2019-05-17-f199b961-3
libuclient20160123 - 2019-05-30-3b3e368d-1
libusb-1.0-0 - 1.0.22-2
libxtables12 - 1.8.2-3
logd - 2019-06-16-4df34a4d-2
lua - 5.1.5-3
luci - git-19.175.17568-86fd703-1
luci-app-firewall - git-19.175.17568-86fd703-1
luci-app-opkg - git-19.175.17568-86fd703-1
luci-app-samba - git-19.175.17568-86fd703-1
luci-app-sqm - 1.3.0-1
luci-base - f138fc93-1
luci-lib-ip - git-19.175.17568-86fd703-1
luci-lib-jsonc - git-19.175.17568-86fd703-1
luci-lib-nixio - git-19.175.17568-86fd703-1
luci-mod-admin-full - git-19.175.17568-86fd703-1
luci-mod-network - git-19.175.17568-86fd703-1
luci-mod-status - git-19.175.17568-86fd703-1
luci-mod-system - git-19.175.17568-86fd703-1
luci-proto-ipv6 - git-19.175.17568-86fd703-1
luci-proto-ppp - git-19.175.17568-86fd703-1
luci-theme-bootstrap - git-19.175.17568-86fd703-1
luci-wrtbwmon - v0.8.3
mtd - 24
nano - 4.3-1
netifd - 2019-06-15-9932ed02-1
odhcp6c - 2019-01-11-d2e247d8-16
odhcpd-ipv6only - 2019-05-17-41a74cba-3
openwrt-keyring - 2018-05-18-103a32e9-1
opkg - 2019-06-14-dcbc142e-1
pciutils - 3.6.2-3
ppp - 2.4.7.git-2019-05-25-2
ppp-mod-pppoe - 2.4.7.git-2019-05-25-2
procd - 2019-05-30-ade00ca5-1
rpcd - 2019-06-05-89bfaa42-2
rpcd-mod-rrdns - 20170710
samba36-server - 3.6.25-14
sqm-scripts - 1.3.0-1
swconfig - 12
tc - 5.0.0-2
terminfo - 6.1-4
ubi-utils - 2.0.2-1
ubox - 2019-06-16-4df34a4d-2
ubus - 2018-10-06-221ce7e7-1
ubusd - 2018-10-06-221ce7e7-1
uci - 2019-05-17-f199b961-3
uclient-fetch - 2019-05-30-3b3e368d-1
uhttpd - 2019-06-16-91fcac34-3
urandom-seed - 1.0-1
urngd - 2019-06-17-c057e177-1
usbutils - 007-10
usign - 2015-07-04-ef641914-1
wireless-regdb - 2017-10-20-4343d359
wpad-mini - 2018-12-02-c2c6c01b-6
wrtbwmon - 0.36
zlib - 1.2.11-3

- Steps to reproduce

I have UniElec U7621-06 router with 3 miniPCIe slots. PCIE2 slot gets not detected when the device boots from cold boot.
When I reboot the device from LuCi (warm boot) it works fine.

root@OpenWrt:~# lspci
00:00.0 PCI bridge: Device 0e8d:0801 (rev 01)
00:01.0 PCI bridge: Device 0e8d:0801 (rev 01)
00:02.0 PCI bridge: Device 0e8d:0801 (rev 01)
01:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
02:00.0 Network controller: MEDIATEK Corp. Device 7612
03:00.0 Network controller: MEDIATEK Corp. Device 7602
29.06.20192344KernelFeature RequestVery LowLowadd VRF supportAllUnconfirmed Task Description

https://www.kernel.org/doc/Documentation/networking/vrf.txt

Virtual Routing and Forwarding (VRF) would appear to be a perfect companion for a router device, considering its benefits

* higher priority ip rules (Policy Based Routing, PBR)
* iproute2 supports the vrf
* unix socket routing
* impacts only Layer 3 and above so L2 tools (e.g., LLDP) are not affected
* VRF devices allow VRFs to be nested within namespaces

Unfortunately, support for VRF is currently absent from the OpenWRT repo in all version.

 


03.07.20192353Base systemBug ReportVery LowLowCPU: 0 PID: 11550 Comm: kworker/u2:3 Not tainted 4.14.1...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on MT7620 and MT7621 ( zbt 3526 / zbt 826)
- Software version: trunk LuCI Master (f138fc93) / OpenWrt SNAPSHOT r10374-fdd0a8d491
- Steps to reproduce: is happening after a while, strange as it was everywhere happening .. maybe it was related to keepalaive ?

 

installed mwan3 & tried to restart, but funny as all of the routers got this crash message.

Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.490007] ------------[ cut here ]------------
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.494765] WARNING: CPU: 0 PID: 11550 at net/netfilter/core.c:393 __nf_unregister_net_hook+0x84/0x330
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.504344] Modules linked in: rt2800soc rt2800mmio rt2800lib pppoe ppp_async option usb_wwan rt2x00soc rt2x00mmio rt2x00lib pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY usbserial ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_rtsp nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.600916]  nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtsp nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda macvlan iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat br_netfilter sch_cake nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.698070]  ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 nfsv4 nfsv3 nfs ip_gre gre ifb ip_tunnel tun vfat fat lockd sunrpc grace dns_resolver dm_mirror dm_region_hash dm_log dm_crypt dm_mod dax nls_utf8 nls_iso8859_1 nls_cp437 sha1_generic ecb usb_storage sd_mod scsi_mod ext4 mbcache jbd2 crc16 cryptomgr aead crypto_null crc32c_generic crypto_hash mmc_block mtk_sd mmc_core leds_gpio ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.490007] ------------[ cut here ]------------
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.494765] WARNING: CPU: 0 PID: 11550 at net/netfilter/core.c:393 __nf_unregister_net_hook+0x84/0x330
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.504344] Modules linked in: rt2800soc rt2800mmio rt2800lib pppoe ppp_async option usb_wwan rt2x00soc rt2x00mmio rt2x00lib pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY usbserial ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_rtsp nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.600916]  nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtsp nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda macvlan iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat br_netfilter sch_cake nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.698070]  ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 nfsv4 nfsv3 nfs ip_gre gre ifb ip_tunnel tun vfat fat lockd sunrpc grace dns_resolver dm_mirror dm_region_hash dm_log dm_crypt dm_mod dax nls_utf8 nls_iso8859_1 nls_cp437 sha1_generic ecb usb_storage sd_mod scsi_mod ext4 mbcache jbd2 crc16 cryptomgr aead crypto_null crc32c_generic crypto_hash mmc_block mtk_sd mmc_core leds_gpio ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.775586] CPU: 0 PID: 11550 Comm: kworker/u2:3 Not tainted 4.14.131 #0
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.782475] Workqueue: netns cleanup_net
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.786480] Stack : 8030d148 00000189 00000002 8005c208 804a8c98 00000000 00000001 80f76994
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.795046]         804a4c9c 8639dcc4 80500000 8005d0f4 00000002 80f76995 8639dca0 1b26b88a
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.803624]         00000000 00000000 00000000 00011da0 00000000 00000ab2 00000008 00000000
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.812182]         00000000 80500000 000bf08b 00000000 00000000 00000009 00000000 804ccb2c
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.820740]         8030d148 00000189 00000002 802c5d00 00000003 80247508 00000000 80550000
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.829299]         ...
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.831797] Call Trace:
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.834315] [<8000f0b0>] show_stack+0x58/0x100
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.838876] [<8002ad90>] __warn+0xe4/0x13c
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.843869] [<8002ae78>] warn_slowpath_null+0x1c/0x34
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.849817] [<8030d148>] __nf_unregister_net_hook+0x84/0x330
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.855616] [<8030d488>] nf_unregister_net_hooks+0x38/0x5c
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.861283] [<802c4bf4>] ops_exit_list.isra.11+0x58/0xa8
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.866709] [<802c5d60>] cleanup_net+0x1ac/0x2d0
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.871461] [<800408b4>] process_one_work+0x26c/0x418
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.876618] [<80040d80>] worker_thread+0x320/0x56c
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.881537] [<80046c64>] kthread+0x134/0x148
Wed Jul  3 15:36:08 2019 kern.warn kernel: [46645.885899] [<80009a98>] ret_from_kernel_thread+0x14/0x1c


09.07.20192371KernelBug ReportVery LowLowMulticast/IGMP/DSA IssuesTrunkUnconfirmed Task Description

- Device problem occurs on

Linksys WRT3200ACM

- Software versions of OpenWrt/LEDE release, packages, etc.

Latest trunk (with 4.19 kernel)

I have enabled DSA in my router with the kernel version 4.14, and it worked well, but since the kernel was bumped to 4.19 DSA has been giving some issues, namely:

- When I add a interface, for example a DHCP client and select for the interface wan.12 OpenWRT crashes and bootloops until it reboots to the last system. After some testing I found out that if I added a interface connected to wan and thern connect the mentioned DHCP client interface to wan.12 the system doesn’t crash

-When I have the system working and connect a IPTV STB to the lan interface, with the exact configuration as in kernel 4.14 the TV works for a while but then image stops. After some testing found out that only the channel that stopped wouldn’t work, while other channels worked, until they stopped working (the same issue as the first channel) and it goes on and on and on until either something (I don’t know what) times out or I restart the router.

This only happened after the kernel 4.14 bump, and I believe this issue also happens with Turris omnia devices.
If you need I’m currently able to test patches as you need.
My question is, Is this a OpenWRT bug or a device drive issue that must be reported to the kernel develp team?
Either way I’m posting the same in the forums.

10.07.20192372PackagesBug ReportVery LowLow[netifd] error code language semantics misleadsAllUnconfirmed Task Description

I would have preferred to submit a patch but my coding skills are not up to speed/standard...

Trying to debug a PPPoE issue it was not possible to utilize –verbose with ifup || ifdown since it would appear not being implemented. Thus started to look at what LuCI has on display when stopping || starting the WAN iface via LuCI:

Unknown error (USER_REQUEST)

Whilst USER_REQUEST would seem logical as being manually initiated by the user the Unknown error however led me down the garden path until having traced its source

https://openwrt-devel.openwrt.narkive.com/piBGMKkc/patch-ppp-detailed-last-error-support

To my understanding

https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=package/network/services/ppp/files/ppp.sh;h=b553effd889e7662f366793665c789ed0d0c0ff2;hb=refs/heads/openwrt-master#l64

*) echo "UNKNOWN_ERROR" ;;

gets tagged to any of the potential error codes (1 - 21), even to

0) echo "OK" ;;

Which could introduce some sort of confusion to a simple minded user (being me).

0) echo "OK" ;;
5) echo "USER_REQUEST" ;;

would not appear to warrant an error tag at all. And the remainder, except 21, would appear to be rather specific than to be labelled as Unknown error.

Perhaps

*) echo "UNKNOWN_ERROR" ;;

is meant to be anything else that is not covered by codes 1 - 21 but that is not how it turns out on (LuCI) display.

I would thus humbly suggest to sort non-errors from actual errors and not tag the Unknown error to any of the specific error codes. It may help others that find themselves in a similar situation.


Whilst not being part of the topic but in a way related perhaps implementing

--verbose

for ifup || ifdown might go a long way in debugging connectivity issues.

11.07.20192381Base systemBug ReportVery LowLowHostname variable is missing for the same machine on di...openwrt-18.06New Task Description

Hello,

an older Asus eeePC was just connected to the router using cable. Seconds later the wireless connection became alive as well.
On the DHCP leases I can see the 1 sec older entry for the wired connection, but shows no hostname.
The wireless connection’s lease will expire 1 second later and has the hostname variable.
Is this function broken by design?

Regards

14.07.20192384KernelBug ReportVery LowLowAsus WL500GP V2 crashopenwrt-18.06Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on - Asus WL500GP V2;
- Software versions of OpenWrt/LEDE - OpenWrt 18.06.4, r7808-ef686b7292
- Steps to reproduce - I’m not sure, just a higher load and utilizing the wireless connection. For example I’m loading the LuCi realtime graphs in the browser and start downloading a file from the local network.

I’m attaching a crashlog obtained via `cat /sys/kernel/debug/crashlog`. There seems to be a hint for the problem:

<4>[461295.961960] Unhandled kernel unaligned access[#1]:
<4>[461295.967070] CPU: 0 PID: 1299 Comm: irq/5-b43 Not tainted 4.14.131 #0
<4>[461295.973745] task: 80e62680 task.stack: 80e6c000
<4>[461295.978525] $ 0   : 00000000 1000f800 00000001 00000000
<4>[461295.984061] $ 4   : ea1d3f8d 00000022 40005000 00000000
<4>[461295.989598] $ 8   : 80abebd8 00000000 00000002 00000057
<4>[461295.995136] $12   : 0000be9e 00008cc6 00001f00 00000000
<4>[461296.000673] $16   : 00000000 80abf50c 80abf4e0 80e5cd80
<4>[461296.006210] $20   : 00000001 80d77c80 00000000 8041b944
<4>[461296.011747] $24   : 00000000 8024d010
<4>[461296.017285] $28   : 80e6c000 80e6d930 80420000 80262264
<4>[461296.022823] Hi    : 00000000
<4>[461296.025899] Lo    : 002457e0
<4>[461296.028984] epc   : 80262e70 0x80262e70
<4>[461296.033055] ra    : 80262264 0x80262264
<4>[461296.037115] Status: 1000f803     KERNEL EXL IE
<4>[461296.041563] Cause : 00800010 (ExcCode 04)
<4>[461296.045807] BadVA : ea1d3fa1
<4>[461296.048884] PrId  : 00029029 (Broadcom BMIPS3300)
15.07.20192388Base systemBug ReportVery LowLowntfs-3g causes NTFS error message when trying to mount ...TrunkUnconfirmed Task Description

Archer C7 V2, running release 18.06.01

Having kmod-fs-ntfs and ntfs-3g packages installed. When I try to mount a FAT32 partition using the following command:

mount -o "rw,sync" "$(blkid --uuid 8457-AE8F)" "/TSH"

I get the following error (twice)

Failed to mount '/dev/sda1': Invalid argument
The device '/dev/sda1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
NTFS signature is missing.
Failed to mount '/dev/sda1': Invalid argument
The device '/dev/sda1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

(The volume still mounts though).

After investigation, it appears that ntfs-3g is the cause of the problem. Removing it (even while keeping kmod-fs-ntfs installed) seems to stop the error message form showing when mounting the partition.

 


20.07.20192393KernelBug ReportVery LowLowkernel error - net/sched/sch_generic.c:320 dev_watchdog...TrunkUnconfirmed Task Description

Model: ZBT-WG3526 (32M)
Architecture: MediaTek MT7621 ver:1 eco:3
Firmware Version: OpenWrt SNAPSHOT r10497-f1875e902d / LuCI Master (git-19.193.31361-7c9d845)
Kernel Version: 4.14.132
version: LuCI Master (git-19.193.31361-7c9d845) / OpenWrt SNAPSHOT r10497-f1875e902d

getting this per day around 2-3 times :( but snce a longer while ...) not sure, if already reported, and not sure, if that is maybe a problem of QOS ?

sch_generic.c

QOS is installed via:
#traffic shaping:
#############################
opkg install tc luci-app-sqm sqm-scripts kmod-sched-cake

Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.719599] ------------[ cut here ]------------
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.724269] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:320 dev_watchdog+0x1ac/0x324
Fri Jul 19 05:58:52 2019 kern.info kernel: [49182.732539] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.739475] Modules linked in: pppoe ppp_async option usb_wwan pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY usbserial ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_rtsp nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.810045]  nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtsp nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conntrack macvlan iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat br_netfilter sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.881294]  ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 nfsv4 nfsv3 nfs ip_gre gre ifb ip_tunnel tun vfat fat lockd sunrpc grace dns_resolver dm_mirror dm_region_hash dm_log dm_crypt dm_mod dax nls_utf8 nls_iso8859_1 nls_cp437 sha1_generic ecb usb_storage ext4 mbcache jbd2 crc32c_generic mmc_block mtk_sd mmc_core leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd ahci libahci libata sd_mod scsi_mod gpio_button_hotplug usbcore nls_base usb_common
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.927764] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.132 #0
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.933840] Stack : 00000000 8ff4b540 80600000 80078ecc 80630000 805c9bd8 00000000 00000000
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.942181]         80592d40 8fc0ddc4 8fc3cb0c 80606a47 8058db40 00000001 8fc0dd68 ac07f59d
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.950522]         00000000 00000000 80780000 00008e08 00000000 0000019e 00000008 00000000
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.958863]         00000000 80610000 000e2814 00000000 00000000 00000000 80630000 805c3a38
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.967196]         803c7118 00000140 00000002 8ff4b540 00000000 802e6cb8 00000008 80770008
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.975534]         ...
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.977976] Call Trace:
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.980445] [<8000c8d0>] show_stack+0x58/0x100
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.984897] [<804c57ac>] dump_stack+0x9c/0xe0
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.989243] [<8002f9b8>] __warn+0xe0/0x138
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.993323] [<8002fa40>] warn_slowpath_fmt+0x30/0x3c
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49182.998279] [<803c7118>] dev_watchdog+0x1ac/0x324
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49183.002966] [<8008ff4c>] call_timer_fn.isra.25+0x24/0x84
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49183.008254] [<80090208>] run_timer_softirq+0x1bc/0x248
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49183.013393] [<804e2a08>] __do_softirq+0x128/0x2ec
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49183.018085] [<80034664>] irq_exit+0xac/0xc8
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49183.022270] [<802947b0>] plat_irq_dispatch+0xfc/0x138
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49183.027299] [<80007588>] except_vec_vi_end+0xb8/0xc4
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49183.032243] [<80008f50>] r4k_wait_irqoff+0x1c/0x24
Fri Jul 19 05:58:52 2019 kern.warn kernel: [49183.037115] ---[ end trace fde9f407bd307871 ]---
Fri Jul 19 05:58:52 2019 kern.err kernel: [49183.041793] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
Fri Jul 19 05:58:52 2019 kern.info kernel: [49183.048004] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000065
Fri Jul 19 05:58:52 2019 kern.info kernel: [49183.054073] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=0eb30000, max=0, ctx=3427, dtx=3427, fdx=3426, next=3427
Fri Jul 19 05:58:52 2019 kern.info kernel: [49183.064951] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=0e2c0000, max=0, calc=3019, drx=3020
Fri Jul 19 05:58:53 2019 kern.info kernel: [49183.078139] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
Fri Jul 19 05:58:53 2019 kern.info kernel: [49183.091357] mtk_soc_eth 1e100000.ethernet: PPE started

 
22.07.20192396Base systemBug ReportVery LowLowClients become isolated via hairpin_mode=0 after DFS ra...TrunkUnconfirmed Task Description

Summary: After a while clients become isolated, even though "isolate clients" is not enabled. The DFS radar deteion somehow leads to hairpin_mode being set to 0.

Devices:
Tested on several TP-Link Archer C7 rev 5 devices. All exhibit the same behavior.

Build:
Running trunk e05310b9 from 2019-07-12.
Configured with wpad-basic.

Configuration:
The devices are configured with the ath10k 5GHz radio on frequencies requireing DFS.
"Isolate clients" is disabled in LuCI.
There are two SSIDs on each radio brdiging into br-lan and br-guest.

Steps to reproduce:
At startup the device works and all clients can see each other.
The file /sys/devices/virtual/net/br-lan/lower_wlan0/brport/hairpin_mode contains "1" as expected.

Every now and then (normally several days) there is a "DFS-RADAR-DETECTED" event in the log. The hostapd immediately starts to move to a new frequency as expected. One minute later the interface comes back up and clients reassociate, again as expected.

At this point clients are no longer able to reach each other. The effect is as if the "isolate clients" was enabled. Looking at the /sys/.../brport/hairpin_mode file of the radio interface it now contains "0".

The log around that time is:

un Jul 21 20:02:43 2019 daemon.notice hostapd: wlan0: DFS-RADAR-DETECTED freq=5520 ht_enabled=0 chan_offset=0 chan_width=3 cf1=5530 cf2=0
Sun Jul 21 20:02:43 2019 daemon.notice hostapd: wlan0: DFS-NEW-CHANNEL freq=5260 chan=52 sec_chan=1
Sun Jul 21 20:02:43 2019 daemon.warn hostapd: DFS failed to schedule CSA (-22) - trying fallback
Sun Jul 21 20:02:43 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Sun Jul 21 20:02:43 2019 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 58:c5:cb:cd:95:5d
Sun Jul 21 20:02:43 2019 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED c8:f7:33:d6:b7:5d
Sun Jul 21 20:02:43 2019 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED d8:9c:67:75:4a:c5
Sun Jul 21 20:02:43 2019 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 94:b8:6d:04:cc:8e
Sun Jul 21 20:02:43 2019 daemon.notice netifd: Network device 'wlan0-1' link is down
Sun Jul 21 20:02:43 2019 kern.info kernel: [193131.259734] br-guest: port 3(wlan0-1) entered disabled state
Sun Jul 21 20:02:43 2019 kern.info kernel: [193131.268551] device wlan0-1 left promiscuous mode
Sun Jul 21 20:02:43 2019 kern.info kernel: [193131.273453] br-guest: port 3(wlan0-1) entered disabled state
Sun Jul 21 20:02:43 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0-1 from bridge br-guest: No such device
Sun Jul 21 20:02:43 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sun Jul 21 20:02:43 2019 kern.info kernel: [193131.354845] device wlan0 left promiscuous mode
Sun Jul 21 20:02:43 2019 kern.info kernel: [193131.359702] br-lan: port 2(wlan0) entered disabled state
Sun Jul 21 20:02:43 2019 daemon.notice netifd: Network device 'wlan0' link is down
Sun Jul 21 20:02:43 2019 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sun Jul 21 20:02:44 2019 kern.warn kernel: [193132.555691] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
Sun Jul 21 20:02:44 2019 kern.info kernel: [193132.573394] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
Sun Jul 21 20:02:44 2019 kern.info kernel: [193132.579989] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
Sun Jul 21 20:02:44 2019 kern.info kernel: [193132.588382] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24632 iram: 26408'
Sun Jul 21 20:02:44 2019 kern.warn kernel: [193132.657322] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
Sun Jul 21 20:02:44 2019 kern.info kernel: [193132.673165] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sun Jul 21 20:02:44 2019 kern.info kernel: [193132.685679] br-lan: port 2(wlan0) entered blocking state
Sun Jul 21 20:02:44 2019 kern.info kernel: [193132.691285] br-lan: port 2(wlan0) entered disabled state
Sun Jul 21 20:02:44 2019 kern.info kernel: [193132.697181] device wlan0 entered promiscuous mode
Sun Jul 21 20:02:44 2019 daemon.notice hostapd: wlan0: interface state DISABLED->COUNTRY_UPDATE
Sun Jul 21 20:02:44 2019 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->HT_SCAN
Sun Jul 21 20:02:44 2019 daemon.notice hostapd: wlan0: interface state HT_SCAN->DFS
Sun Jul 21 20:02:44 2019 daemon.notice hostapd: wlan0: DFS-CAC-START freq=5260 chan=52 sec_chan=1, width=1, seg0=58, seg1=0, cac_time=60s
Sun Jul 21 20:03:46 2019 daemon.notice hostapd: wlan0: DFS-CAC-COMPLETED success=1 freq=5260 ht_enabled=0 chan_offset=0 chan_width=3 cf1=5290 cf2=0
Sun Jul 21 20:03:46 2019 daemon.err hostapd: Using interface wlan0 with hwaddr b0:be:76:f4:c2:ad and ssid "MP 5GHz"
Sun Jul 21 20:03:46 2019 kern.info kernel: [193194.981050] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sun Jul 21 20:03:46 2019 kern.info kernel: [193194.988086] br-lan: port 2(wlan0) entered blocking state
Sun Jul 21 20:03:46 2019 kern.info kernel: [193194.993690] br-lan: port 2(wlan0) entered forwarding state
Sun Jul 21 20:03:46 2019 daemon.notice netifd: Network device 'wlan0' link is up
Sun Jul 21 20:03:46 2019 kern.info kernel: [193195.005990] br-guest: port 3(wlan0-1) entered blocking state
Sun Jul 21 20:03:46 2019 kern.info kernel: [193195.012050] br-guest: port 3(wlan0-1) entered disabled state
Sun Jul 21 20:03:46 2019 kern.info kernel: [193195.018539] device wlan0-1 entered promiscuous mode
Sun Jul 21 20:03:46 2019 kern.info kernel: [193195.040940] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
Sun Jul 21 20:03:46 2019 kern.info kernel: [193195.047485] br-guest: port 3(wlan0-1) entered blocking state
Sun Jul 21 20:03:46 2019 kern.info kernel: [193195.053432] br-guest: port 3(wlan0-1) entered forwarding state
Sun Jul 21 20:03:46 2019 daemon.err hostapd: Using interface wlan0-1 with hwaddr b2:be:76:f4:c2:ad and ssid "MPGuest 5GHz"
Sun Jul 21 20:03:46 2019 daemon.notice hostapd: wlan0: interface state DFS->ENABLED
Sun Jul 21 20:03:46 2019 daemon.notice hostapd: wlan0: AP-ENABLED
Sun Jul 21 20:03:46 2019 kern.info kernel: [193195.110775] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready

Iniital analysis:
I found that of the programs compiled in my build only netifd and hostapd writes to the hairpin_mode file.
I instrumented those two programs to log when they write to hairpin mode. At startup only netifd writes a "1" to the hairpin_mode file for the bridge port.

No writes are made to the hairpin_mode file at the time of failure. Since it takes several days for the DFS radar detection to fire I have not yet checked if e.g. hostapd or netifd removes and re-adds the interfaces to the bridge without restoring the hairpin_mode. Maybe someone knows?

From looking at the logs and the code I am not sure if hostapd, netifd or both thinks they are responsible for managing the bridging of the interfaces.

24.07.20192401Base systemBug ReportVery LowLowlantiq: xway: OpenWrt 18.06.x: U-boot_nor: U-Boot hangs...TrunkUnconfirmed Task Description

Device problem occurs on (tested): Alice IAD 4421 (o2 Box 4421), EasyBox803, SpeeportW504_A

Software versions of OpenWrt/LEDE: OpenWrt 18.06.x to trunk, U-boot_nor

Steps to reproduce: flash u-boot_nor trunk and OpenWrt

→ U-Boot hangs at: “Uncompressing Kernel Image …“

→ since OpenWrt 18.06.0 → U-Boot hangs at: “Uncompressing Kernel Image …“
U-Boot LEDE 17.01.6 works but there is none: → scroll bottom

Workaround:
build U-bootgit checkout v17.01.6make menuconfig → look for bootloader

→ or try working: U-Boot_LEDE_17.01.6_2013.10-openwrt4_nor (only tftpput missing)

Trials:
→ tested U-boot_nor (OpenWrt 18.06.x till trunk) on Easybox803
→ tested U-boot_nor v17.01.6 on Alice IAD 4421 (o2 Box 4421), Easybox803, SpeeportW504_A
→ checked U-boot: printenv → kernel_addr=0xB0050000 does match adress OpenWrt has to be flashed to
→ checked/compared size of U-boot: 17.01.6 and 18.06.x almost same

Conclusion:
Is it possible to get working U-boots to → http://downloads.openwrt.org/releases/17.01.6/targets/lantiq/xway/ till bug is fixed or if there is no fix?

25.07.20192402Base systemBug ReportVery LowLowTL-WDR3600 random rebootsTrunkUnconfirmed Task Description

OpenWrt SNAPSHOT, r10368-17ae3eb9ff
Linux OpenWrt 4.14.131 #0 Sun Jun 30 08:16:08 2019 mips GNU/Linux

25.07.20192407Base systemBug ReportVery LowLowwdr3600 5ghz wireless keeps cutting outTrunkUnconfirmed Task Description

Supply the following if possible:

- Device problem occurs on
TL WDR3600 v1

- Software versions of OpenWrt/LEDE release, packages, etc.
Powered by LuCI Master (git-19.204.23774-bd44189) / OpenWrt SNAPSHOT r10574-273b803623 (also tried with 18.06.01 & 02 & 04)
Atheros AR9580

- Steps to reproduce

 

Set up Wireless 5g to Canada, N mode, auto channel, auto power, 20 Mhz width.

wireless wlan1 will not associate.

root@OpenWrt:~# iwinfo wlan1 info
wlan1 ESSID: “Wrigley5”

        Access Point: E8:DE:27:FF:9F:99
        Mode: Master  Channel: 149 (5.745 GHz)
        Tx-Power: 19 dBm  Link Quality: unknown/70
        Signal: unknown  Noise: -95 dBm
        Bit Rate: unknown
        Encryption: WPA2 PSK (CCMP)
        Type: nl80211  HW Mode(s): 802.11an
        Hardware: 168C:0033 168C:A120 [Atheros AR9580]
        TX power offset: none
        Frequency offset: none
        Supports VAPs: yes  PHY name: phy1
26.07.20192410Base systemBug ReportVery LowLowTD-W8980: Kernel panic - not syncing: Fatal exception i...TrunkUnconfirmed Task Description

A few times to day the ADSL2+ connection is unable to reconnect because something in the driver seems unable to work again, I have an older router (cisco) and it reconnects whitout any trouble.

Restarting the interface with the br2684ctl init script causes a kernel panic.

DEVICE="TP-Link TD-W8980"   
VERSION="18.06.4"
BUILD_ID="r7808-ef686b7292"
LEDE_BOARD="lantiq/xrx200"
LEDE_ARCH="mips_24kc"
Fri Jul 26 19:53:54 2019 daemon.notice pppd[32180]: pppd 2.4.7 started by root, uid 0
Fri Jul 26 19:53:54 2019 daemon.debug pppd[32180]: Send PPPOE Discovery V1T1 PADI session 0x0 length 4
Fri Jul 26 19:53:54 2019 daemon.debug pppd[32180]:  dst ff:ff:ff:ff:ff:ff  src 30:b5:c2:9d:c4:7e
Fri Jul 26 19:53:54 2019 daemon.debug pppd[32180]:  [service-name]
Fri Jul 26 19:53:59 2019 daemon.debug pppd[32180]: Send PPPOE Discovery V1T1 PADI session 0x0 length 4
Fri Jul 26 19:53:59 2019 daemon.debug pppd[32180]:  dst ff:ff:ff:ff:ff:ff  src 30:b5:c2:9d:c4:7e
Fri Jul 26 19:53:59 2019 daemon.debug pppd[32180]:  [service-name]
Fri Jul 26 19:54:04 2019 daemon.debug pppd[32180]: Send PPPOE Discovery V1T1 PADI session 0x0 length 4
Fri Jul 26 19:54:04 2019 daemon.debug pppd[32180]:  dst ff:ff:ff:ff:ff:ff  src 30:b5:c2:9d:c4:7e
Fri Jul 26 19:54:04 2019 daemon.debug pppd[32180]:  [service-name]
Fri Jul 26 19:54:09 2019 daemon.warn pppd[32180]: Timeout waiting for PADO packets
Fri Jul 26 19:54:09 2019 daemon.err pppd[32180]: Unable to complete PPPoE Discovery
Fri Jul 26 19:54:09 2019 daemon.info pppd[32180]: Exit.
root@OpenWrt:~# /etc/init.d/br2684ctl
[...]
[  888.844371] CPU 0 Unable to h
andle kernel paging request at virtual address 0000000c, epc == 82cce5b0, ra == 819e07a0
[  888.853829] Oops[#1]:
[  888.856086] CPU: 0 PID: 3338 Comm: sh Not tainted 4.9.184 #0
[  888.861738] task: 83a88bc0 task.stack: 81534000
[  888.866255] $ 0   : 00000000 7f8bfef0 80a08b40 82cce5a0
[  888.871476] $ 4   : 8271dc00 80a08b40 0000f6be 00000001
[  888.876697] $ 8   : 83806000 00001ff0 8003256c 7f8bfe64
[  888.881920] $12   : 7f8c0058 00000000 00000000 774b42c0
[  888.887145] $16   : 00000000 00000001 819e6b88 00000000
[  888.892365] $20   : 00000001 819e6b9c 0000000f 819e0000
[  888.897587] $24   : 0045bbe4 00000000                  
[  888.902809] $28   : 81534000 83807eb0 00000001 819e07a0
[  888.908034] Hi    : 00000018
[  888.910903] Lo    : 00000002
[  888.913857] epc   : 82cce5b0 0x82cce5b0 [br2684@82cce000+0x19f0]
[  888.919803] ra    : 819e07a0 0x819e07a0 [ltq_atm_vr9@819e0000+0x6e00]
[  888.926227] Status: 1100ff02 KERNEL EXL 
[  888.930145] Cause : 00800008 (ExcCode 02)
[  888.934147] BadVA : 0000000c
[  888.937023] PrId  : 00019556 (MIPS 34Kc)
[  888.940933] Modules linked in: ltq_atm_vr9 ath9k ath9k_common ath9k_hw ath pppoe nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY pppox ppp_async owl_loader nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink ltq_deu_vr9 iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat fuse sch_cake act_connmark nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress drv_dsl_cpe_api ledtrig_usbport drv_mei_cpe xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables nfsv4 nfsv3 pppoatm ppp_generic slhc
 nfsd nfs ifb rpcsec_gss_krb5 auth_rpcgss oid_registry tun lockd sunrpc grace autofs4 dns_resolver br2684 atm exportfs drv_ifxos sha1_generic md5 hmac ecb des_generic cts cbc usb_storage uhci_hcd ohci_platform ohci_hcd sd_mod scsi_mod ext4 jbd2 mbcache crc32c_generic dwc2 gpio_button_hotplug
Process sh (pid: 3338, threadinfo=81534000, task=83a88bc0, tls=774b5dc0)
[  889.090467] Stack : 00000000 805288a0 00000000 80075714 00000011 819e07a0 8383a354 8108fb80
[  889.098820]         8383a354 00000000 00020000 819e1d30 8052f3f8 00000000 00000001 00407b39
[  889.107178]         80524d40 800738a4 805331c0 00000000 819e39d4 819e39d0 8052f3f8 8052f0a0
[  889.115532]         8057b200 00010000 00000002 00000000 00000100 80033600 774aa000 00000000
[  889.123888]         00000000 800739d8 81468000 00000007 80524058 00000040 806841e0 00000006
[  889.132244]         ...
[  889.134680] Call Trace:[  889.136961] [<80075714>] 0x80075714
[  889.140450] [<819e07a0>] 0x819e07a0 [ltq_atm_vr9@819e0000+0x6e00]
[  889.146612] [<819e1d30>] 0x819e1d30 [ltq_atm_vr9@819e0000+0x6e00]
[  889.152627] [<800738a4>] 0x800738a4
[  889.156111] [<80033600>] 0x80033600
[  889.159589] [<800739d8>] 0x800739d8
[  889.163072] [<80032b74>] 0x80032b74
[  889.166553] [<80032f54>] 0x80032f54
[  889.170034] [<80072d8c>] 0x80072d8c
[  889.173515] [<8000307c>] 0x8000307c
[  889.176996] [<8000c4ec>] 0x8000c4ec
[  889.180479] [<8000a9e8>] 0x8000a9e8
[  889.183950] 
[  889.185425] Code: afbf0014  afb00010  8c9002f8 <8e02000c> 0040f809  00000000  3c028053  8c42f0ac  7c420400 
[  889.195176] 
[  889.196816] ---[ end trace 8e8def78ee4b4969 ]---
[  889.207641] Kernel panic - not syncing: Fatal exception in interrupt
[  889.217636] Rebooting in 3 seconds..
ATU-C Vendor ID:                          FF,B5,47,53,50,4E,00,10
ATU-C System Vendor ID:                   00,00,30,30,30,30,00,00
Chipset:                                  Lantiq-VRX200
Firmware Version:                         5.8.0.11.1.1
API Version:                              4.17.18.6
XTSE Capabilities:                        0x0, 0x0, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0
Annex:                                    A
Line Mode:                                G.992.5 (ADSL2+)
Profile:                                  
Line State:                               UP [0x801: showtime_tc_sync]
Forward Error Correction Seconds (FECS):  Near: 0 / Far: 0
Errored seconds (ES):                     Near: 2 / Far: 0
Severely Errored Seconds (SES):           Near: 0 / Far: 0
Loss of Signal Seconds (LOSS):            Near: 0 / Far: 0
Unavailable Seconds (UAS):                Near: 34 / Far: 34
Header Error Code Errors (HEC):           Near: 0 / Far: 0
Non Pre-emtive CRC errors (CRC_P):        Near: 0 / Far: 0
Pre-emtive CRC errors (CRCP_P):           Near: 0 / Far: 0
Power Management Mode:                    L0 - Synchronized
Latency [Interleave Delay]:               0.25 ms [Fast]   0.25 ms [Fast]
Data Rate:                                Down: 12.287 Mb/s / Up: 1.023 Mb/s
Line Attenuation (LATN):                  Down: 18.4 dB / Up: 7.3 dB
Signal Attenuation (SATN):                Down: 16.8 dB / Up: 0.0 dB
Noise Margin (SNR):                       Down: 19.1 dB / Up: 10.3 dB
Aggregate Transmit Power (ACTATP):        Down: 18.4 dB / Up: 10.4 dB
Max. Attainable Data Rate (ATTNDR):       Down: 20.132 Mb/s / Up: 1.056 Mb/s
Line Uptime Seconds:                      1273
Line Uptime:                              21m 13s
30.07.20192415PackagesBug ReportVery LowLowNginx or Openssl cannot use http2 on x86_64 platformsTrunkUnconfirmed Task Description

Select compile platform for x86_64,
enable nginx http2 option, start compiling, then enable http2 parameters via conf file, you will find that the website cannot be opened.
Only enable http1 and tls 1.3, no problem.

There is no such problem in the bcm53xx platform test.

Trunk kernel version 4.19.57
openssl version 1.1.1c
nginx version 1.16.0

01.08.20192421Base systemBug ReportVery LowLowspidev_test fails to build under SDKTrunkUnconfirmed Task Description

Using July 31, 2019 snapshot SDK (and quite few before that, just got around to reporting) spidev_test fails to build under the ath79 SDK (which causes the entire build to fail). Log message is:

cp: cannot stat ‘/home/daniel/Build/openwrt-sdk-ath79-generic_gcc-7.4.0_musl.Linux-x86_64/build_dir/target-mips_24kc_musl/linux-ath79_generic/linux-4.19.62/tools/spi/*’: No such file or directory
make[3]: *** [Makefile:64: /home/daniel/Build/openwrt-sdk-ath79-generic_gcc-7.4.0_musl.Linux-x86_64/build_dir/target-mips_24kc_musl/linux-ath79_generic/linux-4.19.62/tools/spi-target-mips_24kc_musl/.prepared_de019ecc69c7e706dce2af75912fda36_6664517399ebbbc92a37c5bb081b5c53] Error 1
time: package/feeds/base/spidev_test/compile#0.20#0.05#0.50

base feed is standard, openwrt-packages has modes to p910nd and saned-backends, otherwise current master, all other feeds standard.

 


07.08.20192430Base systemBug ReportVery LowLowUnable to flash latest snapshot builds on ERXopenwrt-18.06Unconfirmed Task Description

Openwrt stable release fails to upgrade to the latest snapshot build with the message

Invalid sysupgrade file.
Image check 'platform_check_image' failed.

Supply the following if possible:
- Device problem occurs on

 Ubiquiti EdgeRouter X

- Software versions of OpenWrt/LEDE release, packages, etc.

 openwrt 18.06 -> latest snapshot

- Steps to reproduce

  1. Run
    sysupgrade -v openwrt-ramips-mt7621-ubiquiti_edgerouterx-squashfs-sysupgrade.bin
08.08.20192431KernelBug ReportVery LowLowar71xx, Archer C7 V2 5GHz, wmi command timeout, ath10k_...TrunkUnconfirmed Task Description

Unfortunately this just spontaneously happened overnight, so I can’t reproduce it. dmesg had a call trace available, and phy0 was able to restart automatically.

Device is a TP-Link Archer C7 V2
Firmware version is OpenWrt 19.07-SNAPSHOT r10194+92-c53f62b111 / LuCI openwrt-19.07 branch (git-19.211.64983-dd908ce)
Kernel is 4.14.134

Package list:

ath10k-firmware-qca988x-ct - 2018-10-10-d366b80d-1
base-files - 198-r10194+92-c53f62b111
busybox - 1.30.1-5
conntrack - 2018-05-01-88610abe-1
dmesg - 2.33-2
dnsmasq-full - 2.80-13
dropbear - 2019.78-2
ethtool - 5.1-1
firewall - 2019-01-02-70f8785b-2
fstools - 2019-03-28-ff1ded63-5
fwtool - 1
getrandom - 2019-04-07-5130fa4d-2
grep - 3.3-1
hostapd-common - 2018-12-02-c2c6c01b-6
hwclock - 2.33-2
iftop - 2017-03-22-949ed0f7-1
ip6tables - 1.8.3-2
ipset - 7.1-3
iptables - 1.8.3-2
iptables-mod-conntrack-extra - 1.8.3-2
iptables-mod-ipopt - 1.8.3-2
iputils-ping - 20101006-1
iputils-tracepath - 20101006-1
iw - 5.0.1-1
iwinfo - 2019-06-12-1372f47e-1
jshn - 2019-02-27-eeef7b50-1
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 4.14.134-1-b137a7e93235587b021963e3049a01f6
kmod-ath - 4.14.134+4.19.32-1-2
kmod-ath10k-ct - 4.14.134+2019-05-08-f98b6dc4-1
kmod-ath9k - 4.14.134+4.19.32-1-2
kmod-ath9k-common - 4.14.134+4.19.32-1-2
kmod-cfg80211 - 4.14.134+4.19.32-1-2
kmod-gpio-button-hotplug - 4.14.134-2
kmod-hwmon-core - 4.14.134-1
kmod-ifb - 4.14.134-1
kmod-ip6tables - 4.14.134-1
kmod-ipt-conntrack - 4.14.134-1
kmod-ipt-conntrack-extra - 4.14.134-1
kmod-ipt-core - 4.14.134-1
kmod-ipt-ipopt - 4.14.134-1
kmod-ipt-ipset - 4.14.134-1
kmod-ipt-nat - 4.14.134-1
kmod-ipt-offload - 4.14.134-1
kmod-ipt-raw - 4.14.134-1
kmod-lib-crc-ccitt - 4.14.134-1
kmod-mac80211 - 4.14.134+4.19.32-1-2
kmod-nf-conntrack - 4.14.134-1
kmod-nf-conntrack-netlink - 4.14.134-1
kmod-nf-conntrack6 - 4.14.134-1
kmod-nf-flow - 4.14.134-1
kmod-nf-ipt - 4.14.134-1
kmod-nf-ipt6 - 4.14.134-1
kmod-nf-nat - 4.14.134-1
kmod-nf-reject - 4.14.134-1
kmod-nf-reject6 - 4.14.134-1
kmod-nfnetlink - 4.14.134-1
kmod-nls-base - 4.14.134-1
kmod-ppp - 4.14.134-1
kmod-pppoe - 4.14.134-1
kmod-pppox - 4.14.134-1
kmod-sched-cake - 4.14.134+2019-03-12-057c7388-1
kmod-sched-connmark - 4.14.134-1
kmod-sched-core - 4.14.134-1
kmod-sched-ctinfo - 4.14.134-1
kmod-sched-ipset - 4.14.134-1
kmod-slhc - 4.14.134-1
kmod-usb-core - 4.14.134-1
kmod-usb-ehci - 4.14.134-1
kmod-usb-ledtrig-usbport - 4.14.134-1
kmod-usb2 - 4.14.134-1
libblobmsg-json - 2019-02-27-eeef7b50-1
libc - 1.1.23-1
libelf1 - 0.176-2
libgcc1 - 7.4.0-1
libip4tc2 - 1.8.3-2
libip6tc2 - 1.8.3-2
libipset13 - 7.1-3
libiwinfo-lua - 2019-06-12-1372f47e-1
libiwinfo20181126 - 2019-06-12-1372f47e-1
libjson-c2 - 0.12.1-3
libjson-script - 2019-02-27-eeef7b50-1
liblua5.1.5 - 5.1.5-3
liblucihttp-lua - 2019-07-05-a34a17d5-1
liblucihttp0 - 2019-07-05-a34a17d5-1
libmnl0 - 1.0.4-2
libncurses6 - 6.1-4
libnetfilter-conntrack3 - 2018-05-01-3ccae9f5-2
libnetfilter-cthelper0 - 1.0.0-2
libnetfilter-cttimeout1 - 1.0.0-2
libnetfilter-queue1 - 2017-06-27-601abd1c-2
libnfnetlink0 - 1.0.1-2
libnl-tiny - 0.1-5
libopenssl1.1 - 1.1.1c-1
libpcap1 - 1.9.0-2
libpcre - 8.43-1
libpthread - 1.1.23-1
librt - 1.1.23-1
libubox20170601 - 2019-02-27-eeef7b50-1
libubus-lua - 2018-10-06-221ce7e7-1
libubus20170705 - 2018-10-06-221ce7e7-1
libuci20130104 - 2019-05-17-f199b961-3
libuclient20160123 - 2019-05-30-3b3e368d-1
libuuid1 - 2.33-2
libxtables12 - 1.8.3-2
logd - 2019-04-07-5130fa4d-2
lua - 5.1.5-3
luci - git-19.211.64983-dd908ce-1
luci-app-firewall - git-19.211.64983-dd908ce-1
luci-app-opkg - git-19.211.64983-dd908ce-1
luci-app-sqm - 1.3.0-1
luci-app-upnp - git-19.211.64983-dd908ce-1
luci-base - git-19.211.64983-dd908ce-1
luci-lib-ip - git-19.211.64983-dd908ce-1
luci-lib-jsonc - git-19.211.64983-dd908ce-1
luci-lib-nixio - git-19.211.64983-dd908ce-1
luci-mod-admin-full - git-19.211.64983-dd908ce-1
luci-mod-network - git-19.211.64983-dd908ce-1
luci-mod-status - git-19.211.64983-dd908ce-1
luci-mod-system - git-19.211.64983-dd908ce-1
luci-proto-ipv6 - git-19.211.64983-dd908ce-1
luci-proto-ppp - git-19.211.64983-dd908ce-1
luci-theme-bootstrap - git-19.211.64983-dd908ce-1
miniupnpd - 2.1.20190408-2
mtd - 24
netifd - 2019-06-08-8c6358b5-2
netperf - 2.7.0-1
odhcp6c - 2019-01-11-d2e247d8-16
odhcpd-ipv6only - 2019-05-17-41a74cba-3
openssh-sftp-server - 8.0p1-1
openwrt-keyring - 2019-07-25-8080ef34-1
opkg - 2019-06-14-dcbc142e-1
ppp - 2.4.7.git-2019-05-25-2
ppp-mod-pppoe - 2.4.7.git-2019-05-25-2
procd - 2019-05-30-ade00ca5-1
rpcd - 2019-06-05-89bfaa42-2
rpcd-mod-rrdns - 20170710
speedtest-netperf - 1.0.0-1
sqm-scripts - 1.3.0-1
swconfig - 12
tc - 5.0.0-2
tcpdump - 4.9.2-1
terminfo - 6.1-4
uboot-envtools - 2018.03-3
ubox - 2019-04-07-5130fa4d-2
ubus - 2018-10-06-221ce7e7-1
ubusd - 2018-10-06-221ce7e7-1
uci - 2019-05-17-f199b961-3
uclibcxx - 0.2.5-1
uclient-fetch - 2019-05-30-3b3e368d-1
uhttpd - 2018-11-28-cdfc902a-3
urandom-seed - 1.0-1
urngd - 2019-06-17-c057e177-1
usign - 2015-07-04-ef641914-1
wireless-regdb - 2017-10-20-4343d359
wpad-basic - 2018-12-02-c2c6c01b-6
zlib - 1.2.11-3

dmesg:

[    0.000000] Linux version 4.14.134 (mfogtman@Lotus) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10194+92-c53f62b111)) #0 Wed Jul 31 15:03:08 2019
[    0.000000] MyLoader: sysp=3dafa4b5, boardp=bf20a5e5, parts=e7a7afeb
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 805043b0, node_mem_map 81000020
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] random: get_random_bytes called from start_kernel+0x90/0x478 with crng_init=0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=ARCHER-C7-V2  console=ttyS0,115200 rootfstype=squashfs noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 124236K/131072K available (3690K kernel code, 182K rwdata, 884K rodata, 292K init, 204K bss, 6836K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
[    0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
[    0.008287] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[    0.074984] pid_max: default: 32768 minimum: 301
[    0.080070] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.087106] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.096360] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.106853] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.113719] NET: Registered protocol family 16
[    0.119553] MIPS: machine is TP-LINK Archer C7
[    0.127364] ar724x-pci ar724x-pci.0: PCIe link is down
[    0.132865] registering PCI controller with io_map_base unset
[    0.139111] registering PCI controller with io_map_base unset
[    0.637765] PCI host bridge to bus 0000:00
[    0.642130] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
[    0.649476] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.655403] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.662629] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.671064] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.671171] PCI host bridge to bus 0000:01
[    0.675543] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
[    0.682853] pci_bus 0000:01: root bus resource [io  0x0001]
[    0.688785] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
[    0.696000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[    0.704454] pci 0000:01:00.0: [168c:003c] type 00 class 0x028000
[    0.704509] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.704563] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.704636] pci 0000:01:00.0: supports D1 D2
[    0.704803] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.704824] pci 0000:01:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    0.712617] pci 0000:01:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
[    0.720835] clocksource: Switched to clocksource MIPS
[    0.727022] NET: Registered protocol family 2
[    0.732333] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.739755] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.746556] TCP: Hash tables configured (established 1024 bind 1024)
[    0.753432] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.759656] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.766543] NET: Registered protocol family 1
[    0.771236] PCI: CLS 0 bytes, default 32
[    0.775155] Crashlog allocated RAM at address 0x3f00000
[    0.781766] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.792635] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.798837] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.816435] io scheduler noop registered
[    0.820602] io scheduler deadline registered (default)
[    0.826326] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.833428] console [ttyS0] disabled
[    0.857294] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[    0.866479] console [ttyS0] enabled
[    0.873896] bootconsole [early0] disabled
[    0.885535] m25p80 spi0.0: found w25q128, expected m25p80
[    0.901931] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.907160] 5 tp-link partitions found on MTD device spi0.0
[    0.912839] Creating 5 MTD partitions on "spi0.0":
[    0.917702] 0x000000000000-0x000000020000 : "u-boot"
[    0.924034] 0x000000020000-0x0000001a694c : "kernel"
[    0.930154] 0x0000001a694c-0x000000ff0000 : "rootfs"
[    0.935845] mtd: device 2 (rootfs) set to be root filesystem
[    0.941656] 1 squashfs-split partitions found on MTD device rootfs
[    0.947931] 0x000000630000-0x000000ff0000 : "rootfs_data"
[    0.955373] 0x000000ff0000-0x000001000000 : "art"
[    0.961238] 0x000000020000-0x000000ff0000 : "firmware"
[    0.968798] libphy: Fixed MDIO Bus: probed
[    0.986427] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
[    1.681669] libphy: ag71xx_mdio: probed
[    2.312357] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[    2.323602] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    2.600832] random: fast init done
[    2.952370] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII
[    2.960211] NET: Registered protocol family 10
[    2.968367] Segment Routing with IPv6
[    2.972208] NET: Registered protocol family 17
[    2.977155] 8021q: 802.1Q VLAN Support v1.8
[    2.988365] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.996610] Freeing unused kernel memory: 292K
[    3.001145] This architecture does not have kernel memory protection.
[    3.756289] init: Console is alive
[    3.759905] init: - watchdog -
[    5.225745] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.289042] usbcore: registered new interface driver usbfs
[    5.294727] usbcore: registered new interface driver hub
[    5.300184] usbcore: registered new device driver usb
[    5.309816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.317857] ehci-platform: EHCI generic platform driver
[    5.323267] ehci-platform ehci-platform.0: EHCI Host Controller
[    5.329301] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[    5.339579] ehci-platform ehci-platform.0: TX-TX IDP fix enabled
[    5.345699] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
[    5.380869] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[    5.388075] hub 1-0:1.0: USB hub found
[    5.392183] hub 1-0:1.0: 1 port detected
[    5.396543] ehci-platform ehci-platform.1: EHCI Host Controller
[    5.402620] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
[    5.412928] ehci-platform ehci-platform.1: TX-TX IDP fix enabled
[    5.419032] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
[    5.450909] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
[    5.458101] hub 2-0:1.0: USB hub found
[    5.462223] hub 2-0:1.0: 1 port detected
[    5.467150] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.484869] init: - preinit -
[    6.891880] eth1: link up (1000Mbps/Full duplex)
[    6.915674] random: procd: uninitialized urandom read (4 bytes read)
[    9.242302] jffs2: notice: (440) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (2 unchecked, 1 orphan) and 12 of xref (1 dead, 1 orphan) found.
[    9.260428] mount_root: switching to jffs2 overlay
[    9.306417] overlayfs: upper fs does not support tmpfile.
[    9.318717] urandom-seed: Seeding with /etc/urandom.seed
[    9.416285] eth1: link down
[    9.428697] procd: - early -
[    9.432257] procd: - watchdog -
[   10.032365] procd: - watchdog -
[   10.035793] procd: - ubus -
[   10.160485] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.193407] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.200229] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.207552] procd: - init -
[   11.030187] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.109118] urngd: v1.0.0 started.
[   11.185750] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.206443] Netfilter messages via NETLINK v0.30.
[   11.222597] ip_set: protocol 6
[   11.281917] Mirror/redirect action on
[   11.304319] u32 classifier
[   11.307070]     input device check on
[   11.310782]     Actions configured
[   11.349644] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[   11.442880] Loading modules backported from Linux version v4.19.32-0-g3a2156c839c7
[   11.450563] Backport generated by backports.git v4.19.32-1-0-g1c4f7569
[   11.483422] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.507077] ctnetlink v0.93: registering with nfnetlink.
[   11.518048] random: crng init done
[   11.521545] random: 6 urandom warning(s) missed due to ratelimiting
[   11.685368] xt_time: kernel timezone is -0000
[   11.915657] PPP generic driver version 2.4.2
[   11.922264] NET: Registered protocol family 24
[   11.952186] pci 0000:01:00.0: using irq 41 for pin 1
[   11.957229] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x3c.
[   11.966264] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[   11.972201] ath10k_pci 0000:01:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[   12.244445] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:01:00.0.txt failed with error -2
[   12.255156] ath10k_pci 0000:01:00.0: Falling back to user helper
[   12.328946] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
[   12.338164] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[   12.349044] ath10k_pci 0000:01:00.0: Falling back to user helper
[   12.490153] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
[   12.500731] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-5.bin failed with error -2
[   12.511885] ath10k_pci 0000:01:00.0: Falling back to user helper
[   12.653080] firmware ath10k!QCA988X!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[   12.662734] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-2.bin failed with error -2
[   12.673878] ath10k_pci 0000:01:00.0: Falling back to user helper
[   12.815861] firmware ath10k!QCA988X!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[   12.825476] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[   12.836358] ath10k_pci 0000:01:00.0: Falling back to user helper
[   12.978197] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[   12.987552] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
[   12.998429] ath10k_pci 0000:01:00.0: Falling back to user helper
[   13.139375] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
[   13.148751] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
[   13.159637] ath10k_pci 0000:01:00.0: Falling back to user helper
[   13.301818] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
[   13.311203] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
[   13.322086] ath10k_pci 0000:01:00.0: Falling back to user helper
[   13.463667] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
[   13.476561] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[   13.485963] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   13.498365] ath10k_pci 0000:01:00.0: firmware ver 10.1-ct-8x-__fW-022-fddd041b api 2 features wmi-10.x,has-wmi-mgmt-tx,adaptive-cca,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 01d1f13e
[   13.612812] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[   13.623438] ath10k_pci 0000:01:00.0: Falling back to user helper
[   13.697313] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[   13.729918] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[   14.666913] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[   14.684321] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
[   14.690608] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
[   14.698749] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24648 iram: 26168'
[   14.766661] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[   14.779442] ath10k_pci 0000:01:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
[   14.914013] ath: EEPROM regdomain: 0x0
[   14.914020] ath: EEPROM indicates default country code should be used
[   14.914023] ath: doing EEPROM country->regdmn map search
[   14.914034] ath: country maps to regdmn code: 0x3a
[   14.914039] ath: Country alpha2 being used: US
[   14.914042] ath: Regpair used: 0x3a
[   14.979019] ath: EEPROM regdomain: 0x0
[   14.979025] ath: EEPROM indicates default country code should be used
[   14.979028] ath: doing EEPROM country->regdmn map search
[   14.979041] ath: country maps to regdmn code: 0x3a
[   14.979046] ath: Country alpha2 being used: US
[   14.979049] ath: Regpair used: 0x3a
[   14.996867] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   14.998485] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
[   15.067318] kmodloader: done loading kernel modules from /etc/modules.d/*
[   26.443821] eth1: link up (1000Mbps/Full duplex)
[   26.448585] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   26.490603] br-lan: port 1(eth1.1) entered blocking state
[   26.496128] br-lan: port 1(eth1.1) entered disabled state
[   26.501868] device eth1.1 entered promiscuous mode
[   26.506730] device eth1 entered promiscuous mode
[   26.581505] br-lan: port 1(eth1.1) entered blocking state
[   26.586992] br-lan: port 1(eth1.1) entered forwarding state
[   26.592810] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   26.629195] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.681789] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   27.480915] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   27.487814] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   27.887178] eth0: link up (1000Mbps/Full duplex)
[   27.914387] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   27.987169] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   31.651455] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   31.820062] br-lan: port 2(wlan1) entered blocking state
[   31.825506] br-lan: port 2(wlan1) entered disabled state
[   31.831174] device wlan1 entered promiscuous mode
[   31.836042] br-lan: port 2(wlan1) entered blocking state
[   31.841471] br-lan: port 2(wlan1) entered forwarding state
[   31.930982] br-lan: port 2(wlan1) entered disabled state
[   34.188629] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[   34.206072] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
[   34.212426] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
[   34.220552] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24648 iram: 26168'
[   34.288838] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
[   34.304306] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   34.346489] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   34.353126] br-lan: port 2(wlan1) entered blocking state
[   34.358517] br-lan: port 2(wlan1) entered forwarding state
[   34.399154] br-lan: port 3(wlan0) entered blocking state
[   34.404594] br-lan: port 3(wlan0) entered disabled state
[   34.410253] device wlan0 entered promiscuous mode
[   95.572860] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   95.579713] br-lan: port 3(wlan0) entered blocking state
[   95.585168] br-lan: port 3(wlan0) entered forwarding state
[67616.023825] device br-lan entered promiscuous mode
[67617.724357] device br-lan left promiscuous mode
[67768.357193] device br-lan entered promiscuous mode
[67768.368081] device br-lan left promiscuous mode
[67942.801840] device br-lan entered promiscuous mode
[67942.813220] device br-lan left promiscuous mode
[68011.047700] device br-lan entered promiscuous mode
[68011.059460] device br-lan left promiscuous mode
[68047.133819] device br-lan entered promiscuous mode
[68109.545749] device br-lan left promiscuous mode
[68171.518281] device br-lan entered promiscuous mode
[68171.530078] device br-lan left promiscuous mode
[68243.026147] device br-lan entered promiscuous mode
[68243.037171] device br-lan left promiscuous mode
[68264.801627] device br-lan entered promiscuous mode
[68480.100656] device br-lan left promiscuous mode
[69862.315880] device br-lan entered promiscuous mode
[69943.999704] device br-lan left promiscuous mode
[70058.964893] device br-lan entered promiscuous mode
[72815.961338] device br-lan left promiscuous mode
[73954.834674] device br-lan entered promiscuous mode
[73954.848295] device br-lan left promiscuous mode
[73989.921066] device br-lan entered promiscuous mode
[73989.938130] device br-lan left promiscuous mode
[74030.863353] device br-lan entered promiscuous mode
[74032.819953] device br-lan left promiscuous mode
[74042.491869] device br-lan entered promiscuous mode
[74043.823203] device br-lan left promiscuous mode
[74074.398650] device br-lan entered promiscuous mode
[75923.519544] device br-lan left promiscuous mode
[79922.715944] device br-lan entered promiscuous mode
[81405.765323] device br-lan left promiscuous mode
[82864.190075] device br-lan entered promiscuous mode
[87683.516136] device br-lan left promiscuous mode
[90714.435509] device br-lan entered promiscuous mode
[94642.461296] device br-lan left promiscuous mode
[94687.318577] device br-lan entered promiscuous mode
[94781.642718] device br-lan left promiscuous mode
[94913.533912] device br-lan entered promiscuous mode
[106071.431181] device eth0.2 entered promiscuous mode
[106071.436540] device eth0 entered promiscuous mode
[106211.460505] device br-lan left promiscuous mode
[106211.469716] device eth0.2 left promiscuous mode
[106211.474939] device eth0 left promiscuous mode
[106238.112404] device eth0.2 entered promiscuous mode
[106238.117410] device eth0 entered promiscuous mode
[106251.739873] device eth0.2 left promiscuous mode
[106251.745130] device eth0 left promiscuous mode
[106257.489077] device br-lan entered promiscuous mode
[106260.371948] device br-lan left promiscuous mode
[106308.352598] device eth0 entered promiscuous mode
[106338.332431] device eth0 left promiscuous mode
[106382.953284] device br-lan entered promiscuous mode
[106407.894849] device br-lan left promiscuous mode
[109510.843928] device br-lan entered promiscuous mode
[114356.161499] device br-lan left promiscuous mode
[146409.574813] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146409.677217] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146409.779617] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146409.882012] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146409.984415] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.086810] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.189222] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.291624] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.394027] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.496435] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.598832] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.701235] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.803640] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.906041] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.008449] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.110842] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.213243] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.315643] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.418043] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.520451] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.622850] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.725260] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.827653] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.930057] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.032461] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.134861] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.237262] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.339663] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.442064] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.449784] ath10k_pci 0000:01:00.0: wmi command 36893 timeout, restarting hardware
[146412.457773] ath10k_pci 0000:01:00.0: failed to delete peer 94:bf:2d:69:13:ab for vdev 0: -11
[146412.466992] ath10k_pci 0000:01:00.0: found sta peer 94:bf:2d:69:13:ab (ptr 85617c00 id 369) entry on vdev 0 after it was supposedly removed
[146412.480284] ------------[ cut here ]------------
[146412.485364] WARNING: CPU: 0 PID: 3115 at backports-4.19.32-1/net/mac80211/sta_info.c:1004 sta_set_sinfo+0xbac/0xc58 [mac80211]
[146412.497271] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat sch_cake em_ipset act_ctinfo act_connmark
[146412.569739] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.577766]  nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[146412.638033] CPU: 0 PID: 3115 Comm: hostapd Not tainted 4.14.134 #0
[146412.644432] Stack : 80500000 804b86ec 00000000 00000000 8049384c 861cdafc 87c9e3dc 804df967
[146412.653068] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.661285]         8048f97c 00000c2b 80553800 000003ec 861cdcac 00000001 861cdab0 82f4d555
[146412.669906]         00000000 00000000 80550000 00007bc0 00000000 00000000 00000007 00000000
[146412.678873]         00000166 902aee62 00000165 6d3a2068 80000000 00000000 87764d14 87707c28
[146412.687681]         00000009 000003ec 861cdcac 874b4800 00000010 80259584 00000000 80550000
[146412.696403]         ...
[146412.699004] Call Trace:
[146412.701879] [<8006c50c>] show_stack+0x58/0x100
[146412.706549] [<80086be0>] __warn+0xe4/0x118
[146412.710797] [<80086ca4>] warn_slowpath_null+0x1c/0x28
[146412.716320] [<87707c28>] sta_set_sinfo+0xbac/0xc58 [mac80211]
[146412.722313] [<87707db4>] sta_info_destroy_addr_bss+0x38/0x60 [mac80211]
[146412.729551] [<8768f1ec>] cfg80211_check_station_change+0x1be0/0x2c54 [cfg80211]
[146412.737603] ---[ end trace a6aa529dc19f5da5 ]---
[146412.749280] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.851674] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.954077] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.056479] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.158882] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.261277] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.363680] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.466089] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.568484] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.670888] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.773280] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.875685] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.978088] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.080494] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.182889] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.285290] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.387700] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.490099] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.592487] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.694903] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.797303] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.899704] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.002104] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.104510] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.206913] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.309321] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.411715] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.514118] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.616520] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.718899] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.804277] ath10k_pci 0000:01:00.0: wmi command 36954 timeout, restarting hardware
[146415.821319] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.923720] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.991376] ath10k_pci 0000:01:00.0: removing peer, cleanup-all, deleting: peer 84a0c600 vdev: 0 addr: 44:07:0b:71:a8:d7 
[146416.002637] ath10k_pci 0000:01:00.0: removing peer, cleanup-all, deleting: peer 84a0cc00 vdev: 0 addr: 54:60:09:43:06:fa 
[146416.013855] ath10k_pci 0000:01:00.0: removing peer, cleanup-all, deleting: peer 86cbf400 vdev: 0 addr: ac:37:43:a6:36:5b 
[146416.025067] ath10k_pci 0000:01:00.0: removing peer, cleanup-all, deleting: peer 87320800 vdev: 0 addr: 18:d6:c7:86:31:5b 
[146416.443806] irq 41: nobody cared (try booting with the "irqpoll" option)
[146416.450705] CPU: 0 PID: 14287 Comm: kworker/u2:1 Tainted: G        W       4.14.134 #0
[146416.458887] Workqueue: ath10k_wq ath10k_core_create [ath10k_core]
[146416.465151] Stack : c0000000 00000003 80553c60 800b4784 8049384c 00000000 00000001 85b78914
[146416.473721]         8048f8e8 87c07ce4 804e0000 800b55e4 80553c60 00000000 87c07cc0 002adb44
[146416.482293]         00000000 00000000 00000000 00009448 00000000 00000000 00000007 00000000
[146416.490864]         0000019d 804f0000 0000019c 20617468 00000000 804f35a0 00000029 ffffffff
[146416.499435]         c0000000 00000003 80553c60 804eda38 00000008 80259584 00000000 80550000
[146416.508006]         ...
[146416.510577] Call Trace:
[146416.513147] [<8006c50c>] show_stack+0x58/0x100
[146416.517755] [<800b8eac>] __report_bad_irq.isra.0+0x54/0xf0
[146416.523404] [<800b9234>] note_interrupt+0x284/0x330
[146416.528438] [<800b67c8>] handle_irq_event_percpu+0x4c/0x64
[146416.534088] [<800b681c>] handle_irq_event+0x3c/0x70
[146416.539122] [<800b9c08>] handle_level_irq+0x11c/0x160
[146416.544330] [<800b5ca0>] generic_handle_irq+0x38/0x50
[146416.549540] [<800b5ca0>] generic_handle_irq+0x38/0x50
[146416.554749] [<800b5ca0>] generic_handle_irq+0x38/0x50
[146416.559974] [<803f9554>] do_IRQ+0x1c/0x2c
[146416.564142] [<8021d770>] plat_irq_dispatch+0xc0/0x120
[146416.569359] [<800673f8>] handle_int+0x138/0x144
[146416.574041] [<8021d770>] plat_irq_dispatch+0xc0/0x120
[146416.579247] handlers:
[146416.581650] [<876134a0>] ath10k_pci_irq_msi_fw_mask [ath10k_pci]
[146416.587824] Disabling IRQ #41
[146416.719014] ieee80211 phy0: Hardware restart was requested
[146419.804223] ath10k_pci 0000:01:00.0: bss channel survey timed out
[146421.204308] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[146421.314256] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
[146421.320460] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
[146421.328691] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24648 iram: 26168'
[146422.304272] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
[146422.744302] ath10k_pci 0000:01:00.0: set-coverage-class, phyclk: 88  value: 0
[146428.684343] ath10k_pci 0000:01:00.0: device successfully recovered
[162100.948919] device br-lan entered promiscuous mode
[166914.012501] device br-lan left promiscuous mode
[193083.423124] device br-lan entered promiscuous mode
[200663.861196] device br-lan left promiscuous mode
[283600.278061] device br-lan entered promiscuous mode
[288463.225795] device br-lan left promiscuous mode

I don’t know if it is relevant, but the only thing different from normal is I had tcpdump sending data to Wireshark overnight (a single host on port 53, so it wasn’t terribly busy).

09.08.20192433Base systemBug ReportVery LowLowdnsmasq exit by receive SIGTERM on boot stageTrunkUnconfirmed Task Description

- Device problem occurs on

 I'm use **MT7688 SOC(ramips)**,and use newest snapshot image **widora_neo-16m-squashfs-sysupgrade.bin**.

- Software versions of OpenWrt/LEDE release, packages, etc.

 use the newest snapshot image,and download on https://downloads.openwrt.org/snapshots/targets/ramips/mt76x8/.

- Steps to reproduce

 
 In boot stage dnsmasq will exit by receive SIGTERM, and then dnsmasq will restart. 
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[746]: exiting on receipt of SIGTERM
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: started, version 2.80 cachesize 150
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: DNS service limited to local subnets
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq-dhcp[1129]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain test
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain onion
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain localhost
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain local
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain invalid
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain bind
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain lan
Thu Aug  8 19:34:58 2019 daemon.warn dnsmasq[1129]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: read /etc/hosts - 4 addresses
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq-dhcp[1129]: read /etc/ethers - 0 addresses
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: read /etc/hosts - 4 addresses
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq-dhcp[1129]: read /etc/ethers - 0 addresses

10.08.20192434Base systemBug ReportVery LowLowLinksys EA6350 Wireless crashedTrunkUnconfirmed Task Description

Linksys EA 6350 2.4 wireless crashed


[15:52:54 10/08/2019] ————[ cut here ]———— [15:52:54 10/08/2019] WARNING: CPU: 2 PID: 1927 at backports-5.2-rc7-1/net/wireless/util.c:1171 cfg80211_calculate_bitrate+0x1d8/0x24c [cfg80211]
[15:52:54 10/08/2019] invalid rate bw=0, mcs=15, nss=4
[15:52:54 10/08/2019] Modules linked in: pppoe ppp_async iptable_nat ipt_MASQUERADE ath10k_pci ath10k_core ath xt_state xt_nat xt_conntrack xt_REDIRECT xt_FLOWOFFLOAD xt_CT rndis_host pppox ppp_generic nf_nat_ipv4 nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mac80211 ipt_REJECT cfg80211 cdc_ether xt_time xt_tcpudp xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG wireguard usbnet slhc nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables hwmon crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip6_udp_tunnel udp_tunnel tun mii leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom gpio_button_hotplug
[15:52:54 10/08/2019] CPU: 2 PID: 1927 Comm: hostapd Not tainted 4.19.64 #0
[15:52:55 10/08/2019] Hardware name: Generic DT based system
[15:52:55 10/08/2019] [<c030e2c4>] (unwind_backtrace) from [<c030ad20>] (show_stack+0×10/0×14)
[15:52:55 10/08/2019] [<c030ad20>] (show_stack) from [<c07abc70>] (dump_stack+0×88/0x9c)
[15:52:55 10/08/2019] [<c07abc70>] (dump_stack) from [<c031b898>] (warn+0xd4/0xf0)
[15:52:55 10/08/2019] [<c031b898>] (
warn) from [<c031b8ec>] (warn_slowpath_fmt+0×38/0×48)
[15:52:55 10/08/2019] [<c031b8ec>] (warn_slowpath_fmt) from [<bf19df68>] (cfg80211_calculate_bitrate+0x1d8/0x24c [cfg80211])
[15:52:55 10/08/2019] [<bf19df68>] (cfg80211_calculate_bitrate [cfg80211]) from [<bf1baee4>] (nl80211_put_sta_rate+0×48/0x104c [cfg80211])
[15:52:55 10/08/2019] [<bf1baee4>] (nl80211_put_sta_rate [cfg80211]) from [<bf1bb698>] (nl80211_put_sta_rate+0x7fc/0x104c [cfg80211])
[15:52:55 10/08/2019] [<bf1bb698>] (nl80211_put_sta_rate [cfg80211]) from [<bf1bc254>] (cfg80211_del_sta_sinfo+0×98/0xd8 [cfg80211])
[15:52:55 10/08/2019] [<bf1bc254>] (cfg80211_del_sta_sinfo [cfg80211]) from [<bf1f56e0>] (sta_set_sinfo+0xcb0/0xd0c [mac80211])
[15:52:55 10/08/2019] [<bf1f56e0>] (sta_set_sinfo [mac80211]) from [<bf1f575c>] (sta_info_destroy+0×20/0×28 [mac80211])
[15:52:55 10/08/2019] [<bf1f575c>] (
sta_info_destroy [mac80211]) from [<bf1f57cc>] (sta_info_destroy_addr_bss+0×28/0×40 [mac80211])
[15:52:55 10/08/2019] [<bf1f57cc>] (sta_info_destroy_addr_bss [mac80211]) from [<bf1a887c>] (nl80211_del_station+0xdc/0xec [cfg80211])
[15:52:55 10/08/2019] [<bf1a887c>] (nl80211_del_station [cfg80211]) from [<c06d2698>] (genl_rcv_msg+0x32c/0x3d0)
[15:52:55 10/08/2019] [<c06d2698>] (genl_rcv_msg) from [<c06d09d8>] (netlink_rcv_skb+0×98/0×108)
[15:52:55 10/08/2019] [<c06d09d8>] (netlink_rcv_skb) from [<c06d1044>] (genl_rcv+0×24/0×34)
[15:52:55 10/08/2019] [<c06d1044>] (genl_rcv) from [<c06d0278>] (netlink_unicast+0x15c/0×200)
[15:52:55 10/08/2019] [<c06d0278>] (netlink_unicast) from [<c06d065c>] (netlink_sendmsg+0×340/0×388)
[15:52:55 10/08/2019] [<c06d065c>] (netlink_sendmsg) from [<c06717d8>] (_sys_sendmsg+0×220/0×254)
[15:52:55 10/08/2019] [<c06717d8>] (
_sys_sendmsg) from [<c067260c>] (sys_sendmsg+0×40/0×64)
[15:52:55 10/08/2019] [<c067260c>] (
sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0×0/0×54)
[15:52:55 10/08/2019] Exception stack(0xcd1c5fa8 to 0xcd1c5ff0)
[15:52:55 10/08/2019] 5fa0: 00000000 00000000 00000005 bec40920 00000000 00000000
[15:52:55 10/08/2019] 5fc0: 00000000 00000000 b6fcaba0 00000128 b6fcdad0 00000001 00000000 00000004
[15:52:55 10/08/2019] 5fe0: bec408c8 bec408b4 b6fa181c b6fa0cec
[15:52:55 10/08/2019] —[ end trace 58a5c1dd202fe432 ]—


Showing tasks 801 - 850 of 906 Page 17 of 19<<First - 15 - 16 - 17 - 18 - 19 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing