OpenWrt/LEDE Project

Welcome to the OpenWrt/LEDE Project bug reporting and issue tracking system

Problems to be reported here are for the OpenWrt/LEDE Project targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt/LEDE Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to lede-bugs@infradead.org.

OpenedIDCategoryTask TypePrioritySeveritySummaryReported In  descStatus
25.11.20192628KernelBug ReportVery LowHighKernel warning / crash on ramips: eth0 (mtk_soc_eth): t...openwrt-19.07Requires testing Task Description

Model ZBT-WG3526 (16M)
Architecture - MediaTek MT7621 ver:1 eco:3
Firmware version - OpenWrt 19.07-SNAPSHOT r10731-e68d589e7b / LuCI openwrt-19.07 branch git-19.326.61751-179c5e8
Kernel version- 4.14.155

 Mon Nov 25 10:11:25 2019 kern.info kernel: [  106.762093] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Mon Nov 25 10:11:25 2019 kern.info kernel: [  106.770348] br-VLAN8: port 2(wlan1) entered blocking state
Mon Nov 25 10:11:25 2019 kern.info kernel: [  106.775981] br-VLAN8: port 2(wlan1) entered forwarding state
Mon Nov 25 10:11:25 2019 kern.info kernel: [  106.784594] br-VLAN6: port 3(wlan1-1) entered blocking state
Mon Nov 25 10:11:25 2019 kern.info kernel: [  106.790393] br-VLAN6: port 3(wlan1-1) entered disabled state
Mon Nov 25 10:11:25 2019 kern.info kernel: [  106.796955] device wlan1-1 entered promiscuous mode
Mon Nov 25 10:11:25 2019 kern.info kernel: [  106.803794] IPv6: ADDRCONF(NETDEV_UP): wlan1-1: link is not ready
Mon Nov 25 10:11:25 2019 kern.info kernel: [  106.810026] br-VLAN6: port 3(wlan1-1) entered blocking state
Mon Nov 25 10:11:25 2019 kern.info kernel: [  106.815820] br-VLAN6: port 3(wlan1-1) entered forwarding state
Mon Nov 25 10:11:25 2019 kern.info kernel: [  107.343567] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
Mon Nov 25 11:10:20 2019 kern.info kernel: [ 3641.266434] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
Mon Nov 25 11:37:14 2019 kern.info kernel: [ 5255.651116] TCP: request_sock_TCP: Possible SYN flooding on port 88. Sending cookies.  Check SNMP counters.
Mon Nov 25 11:41:29 2019 kern.warn kernel: [ 5510.958004] ------------[ cut here ]------------
Mon Nov 25 11:41:29 2019 kern.warn kernel: [ 5510.962647] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:320 0x8038e1c0
Mon Nov 25 11:41:29 2019 kern.info kernel: [ 5510.969709] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
Mon Nov 25 11:41:29 2019 kern.warn kernel: [ 5510.976660] Modules linked in: qcserial pppoe ppp_async option cdc_mbim usb_wwan sierra_net sierra rndis_host qmi_wwan pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_ncm cdc_ether xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY wireguard usbserial usbnet usblp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4
Mon Nov 25 11:41:29 2019 kern.warn kernel: [ 5511.047339]  nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conntrack iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat cdc_wdm cdc_acm fuse ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT
Mon Nov 25 11:41:29 2019 kern.warn kernel: [ 5511.118581]  x_tables nf_reject_ipv6 ip6_udp_tunnel udp_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 uas mmc_block usb_storage mtk_sd mmc_core leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd ahci libahci libata ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common mii crc32c_generic
Mon Nov 25 11:41:29 2019 kern.warn kernel: [ 5511.149081] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.155 #0
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.155177] Stack : 00000000 00000000 00000000 8fe6d540 00000000 00000000 00000000 00000000
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.163556]         00000000 00000000 00000000 00000000 00000000 00000001 8fc0bd60 ac07f582
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.171942]         8fc0bdf8 00000000 00000000 000093c8 00000038 8049e458 00000008 00000000
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.180305]         00000000 80550000 00024659 00000000 8fc0bd40 00000000 00000000 8050c830
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.188647]         8038e1c0 00000140 00000001 8fe6d540 00000000 802b02b8 00000004 805b0004
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.196980]         ...
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.199415] Call Trace:
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.199535] [<8049e458>] 0x8049e458
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.205440] [<8038e1c0>] 0x8038e1c0
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.208923] [<802b02b8>] 0x802b02b8
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.212412] [<800101a0>] 0x800101a0
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.215881] [<800101a8>] 0x800101a8
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.219354] [<804873a4>] 0x804873a4
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.222825] [<800759a0>] 0x800759a0
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.226315] [<800325b8>] 0x800325b8
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.229802] [<8038e1c0>] 0x8038e1c0
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.233316] [<80032640>] 0x80032640
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.236785] [<800d20e8>] 0x800d20e8
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.240287] [<8038e1c0>] 0x8038e1c0
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.243757] [<8009d860>] 0x8009d860
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.247237] [<8038e014>] 0x8038e014
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.250711] [<8008c3dc>] 0x8008c3dc
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.254181] [<80063108>] 0x80063108
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.257662] [<8008c698>] 0x8008c698
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.261136] [<8007cfe8>] 0x8007cfe8
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.264627] [<804a5240>] 0x804a5240
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.268102] [<80036f74>] 0x80036f74
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.271573] [<8025daf0>] 0x8025daf0
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.275054] [<8000b488>] 0x8000b488
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.278548]
Mon Nov 25 11:41:30 2019 kern.warn kernel: [ 5511.280144] ---[ end trace f0b0ca1dd55db7a7 ]---
Mon Nov 25 11:41:30 2019 kern.err kernel: [ 5511.284782] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
Mon Nov 25 11:41:30 2019 kern.info kernel: [ 5511.291016] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000065
Mon Nov 25 11:41:30 2019 kern.info kernel: [ 5511.297053] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=0dc00000, max=0, ctx=1789, dtx=1789, fdx=1788, next=1789
Mon Nov 25 11:41:30 2019 kern.info kernel: [ 5511.307977] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=0db60000, max=0, calc=893, drx=894
Mon Nov 25 11:41:30 2019 kern.info kernel: [ 5511.321091] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
Mon Nov 25 11:41:30 2019 kern.info kernel: [ 5511.334877] mtk_soc_eth 1e100000.ethernet: PPE started

10.08.20181765Base systemBug ReportVery LowMediumdnsmasq-full fails to listen on dhcp socket after reboo...openwrt-19.07Waiting on reporter Task Description

When I restart my router, dnsmasq comes up and works for IPv6, but fails to serve out dhcp for ipv4.

Supply the following if possible:
- Device problem occurs on

Ubiquiti Edgerouter Lite

- Software versions of OpenWrt/LEDE release, packages, etc.

OpenWrt 18.06.0, r7188-b0b5c64c22
dnsmasq-full - 2.80test3-1

- Steps to reproduce

Reboot the router. When it comes up just after reboot, it fails to respond to DHCP requests. lsof shows that it’s not listening on port 67, and does not have /tmp/dhcp.leases open:

root@junction:~# lsof -p 1792 -P
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
dnsmasq 1792 dnsmasq cwd DIR 0,15 3488 1166 /
dnsmasq 1792 dnsmasq rtd DIR 0,15 3488 1166 /
dnsmasq 1792 dnsmasq txt REG 7,0 349744 1526 /usr/sbin/dnsmasq
dnsmasq 1792 dnsmasq mem REG 7,0 16776 189 /usr/lib/libmnl.so.0.2.0
dnsmasq 1792 dnsmasq mem REG 8,2 117320 1033 /lib/libgcc_s.so.1
dnsmasq 1792 dnsmasq mem REG 8,2 25440 1114 /lib/libubus.so
dnsmasq 1792 dnsmasq mem REG 8,2 46168 1029 /lib/libubox.so
dnsmasq 1792 dnsmasq mem REG 7,0 466112 696 /usr/lib/libgmp.so.10.3.2
dnsmasq 1792 dnsmasq mem REG 7,0 206656 702 /usr/lib/libhogweed.so.4.3
dnsmasq 1792 dnsmasq mem REG 7,0 231888 704 /usr/lib/libnettle.so.6.3
dnsmasq 1792 dnsmasq mem REG 7,0 22232 216 /usr/lib/libnfnetlink.so.0.2.0
dnsmasq 1792 dnsmasq mem REG 7,0 111864 561 /usr/lib/libnetfilter_conntrack.so.3.6.0
dnsmasq 1792 dnsmasq mem REG 8,2 650896 1012 /lib/libc.so
dnsmasq 1792 dnsmasq mem REG 0,14 23 713 /tmp/TZ
dnsmasq 1792 dnsmasq 0u CHR 1,3 0t0 1226 /dev/null
dnsmasq 1792 dnsmasq 1u CHR 1,3 0t0 1226 /dev/null
dnsmasq 1792 dnsmasq 2u CHR 1,3 0t0 1226 /dev/null
dnsmasq 1792 dnsmasq 3u netlink 0t0 3561 ROUTE
dnsmasq 1792 dnsmasq 4u IPv4 3568 0t0 UDP junction:53
dnsmasq 1792 dnsmasq 5u IPv4 3569 0t0 TCP junction:53 (LISTEN)
dnsmasq 1792 dnsmasq 6u IPv4 3570 0t0 UDP localhost:53
dnsmasq 1792 dnsmasq 7u IPv4 3571 0t0 TCP localhost:53 (LISTEN)
dnsmasq 1792 dnsmasq 8u IPv6 3572 0t0 UDP localhost:53
dnsmasq 1792 dnsmasq 9u IPv6 3573 0t0 TCP localhost:53 (LISTEN)
dnsmasq 1792 dnsmasq 10r FIFO 0,8 0t0 3574 pipe
dnsmasq 1792 dnsmasq 11w FIFO 0,8 0t0 3574 pipe
dnsmasq 1792 dnsmasq 12u unix 0x800000041d16ca00 0t0 3576 type=DGRAM
dnsmasq 1792 dnsmasq 13u a_inode 0,9 0 14 [eventpoll]
dnsmasq 1792 dnsmasq 14r FIFO 0,8 0t0 3598 pipe
dnsmasq 1792 dnsmasq 15w FIFO 0,8 0t0 3598 pipe
dnsmasq 1792 dnsmasq 16u unix 0x800000041d16d900 0t0 3599 type=STREAM
dnsmasq 1792 dnsmasq 21u IPv6 3729 0t0 UDP fe80::822a:a8ff:fe4c:9dc1:53
dnsmasq 1792 dnsmasq 22u IPv6 3730 0t0 TCP fe80::822a:a8ff:fe4c:9dc1:53 (LISTEN)
dnsmasq 1792 dnsmasq 26u IPv6 3745 0t0 UDP fd90:79d3:5065:f00d::1:53
dnsmasq 1792 dnsmasq 27u IPv6 3746 0t0 TCP fd90:79d3:5065:f00d::1:53 (LISTEN)
dnsmasq 1792 dnsmasq 35u IPv6 6049 0t0 UDP cpe-2606-A000-1100-DB-0-0-0-1.dyn6.twc.com:53
dnsmasq 1792 dnsmasq 36u IPv6 6050 0t0 TCP cpe-2606-A000-1100-DB-0-0-0-1.dyn6.twc.com:53 (LISTEN)

...if I then restart it with “/etc/init.d/dnsmasq restart”, it comes up properly. The router

COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
dnsmasq 6861 dnsmasq cwd DIR 0,15 3488 1166 /
dnsmasq 6861 dnsmasq rtd DIR 0,15 3488 1166 /
dnsmasq 6861 dnsmasq txt REG 7,0 349744 1526 /usr/sbin/dnsmasq
dnsmasq 6861 dnsmasq mem REG 7,0 16776 189 /usr/lib/libmnl.so.0.2.0
dnsmasq 6861 dnsmasq mem REG 8,2 117320 1033 /lib/libgcc_s.so.1
dnsmasq 6861 dnsmasq mem REG 8,2 25440 1114 /lib/libubus.so
dnsmasq 6861 dnsmasq mem REG 8,2 46168 1029 /lib/libubox.so
dnsmasq 6861 dnsmasq mem REG 7,0 466112 696 /usr/lib/libgmp.so.10.3.2
dnsmasq 6861 dnsmasq mem REG 7,0 206656 702 /usr/lib/libhogweed.so.4.3
dnsmasq 6861 dnsmasq mem REG 7,0 231888 704 /usr/lib/libnettle.so.6.3
dnsmasq 6861 dnsmasq mem REG 7,0 22232 216 /usr/lib/libnfnetlink.so.0.2.0
dnsmasq 6861 dnsmasq mem REG 7,0 111864 561 /usr/lib/libnetfilter_conntrack.so.3.6.0
dnsmasq 6861 dnsmasq mem REG 8,2 650896 1012 /lib/libc.so
dnsmasq 6861 dnsmasq mem REG 0,14 23 713 /tmp/TZ
dnsmasq 6861 dnsmasq 0u CHR 1,3 0t0 1226 /dev/null
dnsmasq 6861 dnsmasq 1u CHR 1,3 0t0 1226 /dev/null
dnsmasq 6861 dnsmasq 2u CHR 1,3 0t0 1226 /dev/null
dnsmasq 6861 dnsmasq 3u REG 0,14 0 806 /tmp/dhcp.leases
dnsmasq 6861 dnsmasq 4u IPv4 10060 0t0 UDP *:bootps
dnsmasq 6861 dnsmasq 5u netlink 0t0 10061 ROUTE
dnsmasq 6861 dnsmasq 6u IPv4 10063 0t0 UDP junction:domain
dnsmasq 6861 dnsmasq 7u IPv4 10064 0t0 TCP junction:domain (LISTEN)
dnsmasq 6861 dnsmasq 8u IPv4 10065 0t0 UDP localhost:domain
dnsmasq 6861 dnsmasq 9u IPv4 10066 0t0 TCP localhost:domain (LISTEN)
dnsmasq 6861 dnsmasq 10u IPv6 10067 0t0 UDP fe80::822a:a8ff:fe4c:9dc1:domain
dnsmasq 6861 dnsmasq 11u IPv6 10068 0t0 TCP fe80::822a:a8ff:fe4c:9dc1:domain (LISTEN)
dnsmasq 6861 dnsmasq 12u IPv6 10069 0t0 UDP fd90:79d3:5065:f00d::1:domain
dnsmasq 6861 dnsmasq 13u IPv6 10070 0t0 TCP fd90:79d3:5065:f00d::1:domain (LISTEN)
dnsmasq 6861 dnsmasq 14u IPv6 10071 0t0 UDP cpe-2606-A000-1100-DB-0-0-0-1.dyn6.twc.com:domain
dnsmasq 6861 dnsmasq 15u IPv6 10072 0t0 TCP cpe-2606-A000-1100-DB-0-0-0-1.dyn6.twc.com:domain (LISTEN)
dnsmasq 6861 dnsmasq 16u IPv6 10073 0t0 UDP localhost:domain
dnsmasq 6861 dnsmasq 17u IPv6 10074 0t0 TCP localhost:domain (LISTEN)
dnsmasq 6861 dnsmasq 18r FIFO 0,8 0t0 10075 pipe
dnsmasq 6861 dnsmasq 19w FIFO 0,8 0t0 10075 pipe
dnsmasq 6861 dnsmasq 20u unix 0x800000041c446300 0t0 10077 type=DGRAM
dnsmasq 6861 dnsmasq 21u a_inode 0,9 0 14 [eventpoll]
dnsmasq 6861 dnsmasq 22r FIFO 0,8 0t0 10078 pipe
dnsmasq 6861 dnsmasq 23w FIFO 0,8 0t0 10078 pipe
dnsmasq 6861 dnsmasq 24u unix 0x800000041c445e00 0t0 10079 type=STREAM

When I restart the daemon, I see these messages in the log as well:

Fri Aug 10 09:46:50 2018 daemon.info dnsmasq-dhcp[6861]: DHCP, IP range 192.168.1.100 – 192.168.1.249, lease time 12h
Fri Aug 10 09:46:50 2018 daemon.info dnsmasq-dhcp[6861]: DHCP, sockets bound exclusively to interface br-lan

...but they are absent when the daemon starts on a clean boot.

Attaching my /etc/config/dhcp, and the output from logread.

12.11.20192593Base systemBug ReportVery LowHighno AC wifi with ath10k on 19.07-rc1openwrt-19.07Waiting on reporter Task Description

- Archer C7, Netgear R7800
- 19.07-RC1 default
- install image, configure wifi, try to connect, in my case i’m getting 300Mbps rate, others report as low as up to 54 (legacy only)

 

R7800 report: https://forum.openwrt.org/t/openwrt-19-07-0-first-release-candidate/48040/33

Archer C7 v2 report: https://forum.openwrt.org/t/openwrt-19-07-rc1-archer-c7-v2-5g-wifi-died-after-trying-to-change-channels/48182/7

the situation is the same with intree 4.9.200 driver or any of the latest backports installed on client PC

29.11.20192641KernelBug ReportVery LowMediumDevice file for USB does not appear /dev/ttyUSB*openwrt-19.07Waiting on reporter Task Description

With new version 19.07.0rc I could not make my USB cellular (3g) modem dongle to work due to it simply no any serial device like /dev/ttyUSB* file appear with insertion.
In kernel log it appears report about new device insertion and nothing happenings after.
I made several attempts, with ‘modeswitch’ or without and several other ‘mods’ the result is the same no any /dev/ttyUSB*
With other version it was not such problem it appeared exactly three /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 es well as on my Ubuntu 19.04 And Ubuntu 16.04 Ubuntu 18.04

Both router and dongle are USB-2
Actually router is Asus RT-N16
and modem dongle is Alcatel One Touch X090S

P.S. I need this one to be solved to report other bugs. :)

01.12.20192644Base systemBug ReportVery LowLowdnsmasq-full: Cannot satisfy dependenciesopenwrt-19.07Waiting on reporter Task Description

Environment:
arch: mips
model: TP-link WDR4300
Openwrt: 19.07.0-rc1

Description:
I probably overlooked but hit the following issue where unable to install dnsmasq-full. Actually downloading only already gives the following warning and wonder if I can/should force-install:

# opkg install dnsmasq-full --download-only
Downloading http://downloads.openwrt.org/releases/19.07.0-rc1/packages/mips_24kc/base/dnsmasq-full_2.80-14_mips_24kc.ipk
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for dnsmasq-full:
 * 	kernel (= 4.14.151-1-342af9e4f67b3447c53216ab8e3b12a1)
 * opkg_install_cmd: Cannot install package dnsmasq-full.
03.12.20192650Base systemBug ReportVery LowLowr7800 19.07-rc2 unable to change channel for ACopenwrt-19.07Waiting on reporter Task Description

- Device problem occurs on - Linux r7800 4.14.156 #0 SMP Sat Nov 30 15:52:33 2019 armv7l GNU/Linux
- Software versions of OpenWrt/LEDE release - 19.07-rc2

in Luci when change channel number change actually never gets committed, when do manually in /etc/config/wireless and then reboot router comes up with 5GHz network disabled, after changing back to default channel 36 5GHz network is usable again.

please provide steps to collect log

in dmesg only:

(wlan0) entered blocking state
(wlan0) entered disabled state
   
18.01.20202748Base systemBug ReportVery LowMediumPrinter no more receiving IP address since 19.07.0openwrt-19.07Waiting on reporter Task Description

Dear community,
Previously I had OpenWRT 18.06.5 in use and my printer (HP LaserJet Pro 400 M475dw) was connecting fine over 2.4 GHz WiFi and obtained an IP address of defined DHCP static leases.
I went to 19.07.0 by starting from scratch on the same Netgear R7800 hardware. Everything works fine except for the mentioned printer.
It connects to WiFi and is shown in the list of associated stations, but it doesn’t receive an IP. The syslog prints following two lines about every minute:
Sat Jan 18 13:12:19 2020 daemon.info dnsmasq-dhcp[20788]: DHCPDISCOVER(wlan1) 34:23:87:xx:xx:xx
Sat Jan 18 13:12:19 2020 daemon.info dnsmasq-dhcp[20788]: DHCPOFFER(wlan1) 192.168.1.128 34:23:87:xx:xx:xx

What I’ve tried so far:
- enable/disable static leases: same behavior
- enable/disable KRACK countermeasures: same behavior
- require/optional/disable 802.11w Management Frame Protection: with require and even with optional the printer would not connect to WiFi at all
- factory reset printer and try again: no difference

Additional info:
- I have no WPA3 packets installed or activated - just default firmware image obtained from OpenWRT. Only additional packet is luci-ssl (+dependencies)
- all other devices that connect to 2.4 GHz or 5 GHz get their IP addresses. Those are mobile phones, laptops, tablets, TV’s, Chromecast, vacuum robot...
- As well no problem with physically connected devices like NAS, VoIP phone base, home automation system
- Printer display shows WiFi is connected but IP is set to 169.254.60.37
- It doesn’t look like a WiFi issue, more like something is different with the DHCP server between 18.06.5 and 19.07.0

24.08.20203301PackagesBug ReportVery LowLowCannot satisfy dependency on iptables-mod-tproxyopenwrt-19.07Waiting on reporter Task Description

One example is iptables-mod-tproxy. It is available in 19.07.0, but not in 19.07.1. This causes dependency issue when installing some packages.
How to reproduce:

# opkg install shadowsocks-libev-ss-rules
Installing shadowsocks-libev-ss-rules (3.2.5-5) to root...
Downloading http://downloads.openwrt.org/releases/19.07.1/packages/aarch64_cortex-a53/packages/shadowsocks-libev-ss-rules_3.2.5-5_aarch64_cortex-a53.ipk
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for shadowsocks-libev-ss-rules:
 *      iptables-mod-tproxy
 * opkg_install_cmd: Cannot install package shadowsocks-libev-ss-rules.

I reproduced it on aarch64_coretex_a53, but I see it’s missing for other platforms like a72 and x86_64, too.

It was reported here: https://github.com/openwrt/packages/issues/11457 But was closed and the maintainer said it belongs here.

18.11.20192614KernelBug ReportVery LowHighath10k 5 GHz connectivity issues for some client device...openwrt-19.07Researching Task Description

* - Device problem occurs on TP-Link Archer C2600.

* - Software version of OpenWrt 19.07-rc1 and older 19.07.

* - From the first version, which I tested after the release of 19.07, I have a problem with 5GHz radio / Wi-Fi. On two devices: LG OLED B8 55 “OTT and Cyfrowy Polsat STB OTT does not work internet. Both devices connect to the network, but do not have access to the Internet. In the connection diagnostics on the TV, the message pops up that it is a DNS error. On 2.4 GHz Wi-Fi everything is fine.

* - I have reverted to the 18.06 to fix the problem for now.


25.10.20192567KernelBug ReportVery LowMedium[ATH79] USB speed degradation on WDR4300openwrt-19.07Assigned Task Description

Hello!

I experience huge speed loss on the lastest build (Thu Oct 24 21:58:18 2019) using the ath79 snapshot image builder. I had the same problem on the ~2 weeks earlier build as well, just wanted to have a try on the up to date version now.
Built configuration on both 18.04.6 and 19.07:
PROFILE=tplink_tl-wdr4300-v1 PACKAGES=”block-mount diffutils f2fs-tools kmod-fs-f2fs kmod-mtd-rw kmod-usb-storage luci mailsend-nossl minidlna nfs-kernel-server ppp-mod-pppoe shadow-su transmission-daemon-mbedtls transmission-remote-mbedtls vsftpd usbreset zram-swap -ip6tables -kmod-ip6tables -kmod-ipv6 -kmod-nf-conntrack6 -kmod-nf-ipt6 -libopenssl1.1 -odhcp6c -odhcpd-ipv6only -luci-proto-ipv6 -libip6tc2”

Drive: Kingston DT G3 32GB (old one, better quality with Intel MLC flash)
Firewall: w and w/o flow offload on 19.07
Model: TP-Link WDR4300 v1

File read speeds:
18.06.4 orig vstpd 542M 75s 7,2MB/s
18.06.4 pepe2k vstpd 542M 64s 7,2MB/s
19.07 pepe2k vstpd 542M 543s 1,0MB/s
19.07 pepe2k dd+nc 256M 321s 0,8MB/s

- During the measurement, no root overlay was in use, just a general filesystem was attached
- lower speeds are really close to USB 1.x standard
- measurements took on fresh installations
- the degradation exists if only one drive is attached
- the degradation exists on both filesystem and block level.

I’m using pepe2k’s uboot image (CPU clocked to 600MHz). However I didn’t revert the uboot partition now, I did for a few weeks, nothing has changed.

Let me know if I can help the troubleshooting anyway. Dmesg logs are attached for all mentioned configurations (18.06.4 orig, 18.06.4 pepe2k, 19.07 pepe2k).

Best regards

07.09.20181837Base systemBug ReportMediumMediumKernel oops when using wireguard and mangle/fwmarkopenwrt-19.07New Task Description

On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Ethernet interface being the head-unit connected to a VLAN switch.

Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664463] INFO: rcu_sched self-detected stall on CPU
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664907] 	1-...: (5999 ticks this GP) idle=9ee/140000000000001/0 softirq=961867/961867 fqs=2711
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.665571] 	 (t=6000 jiffies g=358062 c=358061 q=4475)
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.665986] NMI backtrace for cpu 1
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666301] CPU: 1 PID: 14102 Comm: kworker/1:0 Not tainted 4.14.63 #0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666775] Hardware name: XXXXXXXXXX
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667240] Workqueue: wg-crypt-XXXXX 0xffffffffa01dbab0 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667891] Call Trace:
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668145]  <IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668372]  0xffffffff8159c6d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668662]  0xffffffff815a0000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668950]  ? 0xffffffff810418d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669251]  0xffffffff815a0060
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669544]  0xffffffff81041924
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669836]  0xffffffff810c22e3
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670128]  0xffffffff810c176f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670421]  ? 0xffffffff8109fe35
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670720]  ? 0xffffffff810a0062
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671020]  0xffffffff810c432a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671309]  0xffffffff810d0f5e
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671599]  0xffffffff810c4c4f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671892]  0xffffffff810c4df6
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672182]  0xffffffff81602392
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672473]  0xffffffff81601a61
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672760]  </IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672994] RIP: 0010:0xffffffff814e7682
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673327] RSP: 0018:ffffc90000cb3a30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673912] RAX: 00000000000001f8 RBX: ffffc90000cb3af8 RCX: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674426] RDX: ffff880077923e00 RSI: 00000000deb48eb9 RDI: ffff88007aa28e68
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674944] RBP: ffffc90000cb3a80 R08: 0000000000000000 R09: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675456] R10: ffff88007aa28e00 R11: 0000000000000001 R12: ffff880077923e00
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675966] R13: ffffc90000cb3a90 R14: ffff8800786e3a00 R15: ffff88007a360000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676484]  0xffffffff814e7a0a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676773]  0xffffffff814e7d89
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677065]  0xffffffff81532536
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677359]  0xffffffffa01800a7 [iptable_mangle@ffffffffa0180000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677845]  0xffffffff814e2966
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678137]  0xffffffff814ed868
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678430]  ? 0xffffffff814ebed0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678725]  0xffffffff814ed897
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679014]  0xffffffff8152b6bb
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679309]  0xffffffffa002145e [udp_tunnel@ffffffffa0021000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679786]  0xffffffffa01ddf81 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680256]  ? 0xffffffff811038aa
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680555]  ? 0xffffffff810c5454
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680854]  0xffffffffa01dbb5a [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681321]  0xffffffff81091cf4
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681613]  0xffffffff8109204b
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681903]  0xffffffff81096d42
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682191]  ? 0xffffffff81091e40
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682487]  ? 0xffffffff81096c30
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682788]  0xffffffff816001ef

Bootlog:

[    0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Wed Aug 15 20:42:39 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f1b2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f1b3000-0x000000007f1fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f1fb000-0x000000007f314fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f315000-0x000000007f324fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f325000-0x000000007f33bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f344000-0x000000007f358fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f359000-0x000000007f359fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f35a000-0x000000007f377fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f378000-0x000000007f37bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f37c000-0x000000007f38afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f38b000-0x000000007f39bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39c000-0x000000007f39dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f39e000-0x000000007f39efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39f000-0x000000007f3ccfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f3cd000-0x000000007f40ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f410000-0x000000007f58efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f6e5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f6e6000-0x000000007f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Medion E1230/E1230, BIOS 208 02/10/2012
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 write-through
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffffffffff400d10]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[    0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[    0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[    0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[    0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[    0.000000] BRK [0x01e0c000, 0x01e0cfff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MEDION)
[    0.000000] ACPI: XSDT 0x000000007F315070 00005C (v01 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007F3236E8 0000F4 (v04 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007F315158 00E58C (v02 MEDION MEDIONAG 00000001 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000007F390F80 000040
[    0.000000] ACPI: APIC 0x000000007F3237E0 000072 (v03 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: SLIC 0x000000007F323858 000176 (v01 MEDION MEDIONAG 00000001 MSFT 00000001)
[    0.000000] ACPI: ECDT 0x000000007F3239D0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x000000007F323A98 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007F323AD8 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x000000007F323B10 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6effff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f1b2fff]
[    0.000000]   node   0: [mem 0x000000007f410000-0x000000007f58efff]
[    0.000000]   node   0: [mem 0x000000007f6e6000-0x000000007f6effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[    0.000000] On node 0 totalpages: 520921
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 516924 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] random: get_random_bytes called from 0xffffffff81cb0b09 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff88007ee00000 s132056 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s132056 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 512744
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2032612K/2083684K available (8200K kernel code, 527K rwdata, 1312K rodata, 1052K init, 420K bss, 51072K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.040000] tsc: Unable to calibrate against PIT
[    0.040000] tsc: using HPET reference calibration
[    0.040000] tsc: Detected 1595.996 MHz processor
[    0.040000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=15959960)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] ACPI: Core revision 20170728
[    0.068326] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.070105] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.070601] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.071425] Disabled fast string operations
[    0.071787] mce: CPU supports 5 MCE banks
[    0.072125] process: using mwait in idle threads
[    0.072500] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.072914] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.073530] Freeing SMP alternatives memory: 28K
[    0.080265] smpboot: Max logical packages: 2
[    0.081106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.190000] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.190000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.190000] ... version:                3
[    0.190000] ... bit width:              40
[    0.190000] ... generic registers:      2
[    0.190000] ... value mask:             000000ffffffffff
[    0.190000] ... max period:             000000007fffffff
[    0.190000] ... fixed-purpose events:   3
[    0.190000] ... event mask:             0000000700000003
[    0.190000] Hierarchical SRCU implementation.
[    0.190000] smp: Bringing up secondary CPUs ...
[    0.190000] x86: Booting SMP configuration:
[    0.190000] .... node  #0, CPUs:      #1
[    0.010000] Disabled fast string operations
[    0.190000]  #2
[    0.010000] Disabled fast string operations
[    0.190386]  #3
[    0.010000] Disabled fast string operations
[    0.193013] smp: Brought up 1 node, 4 CPUs
[    0.193365] smpboot: Total of 4 processors activated (12767.96 BogoMIPS)
[    0.195434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196180] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.197097] NET: Registered protocol family 16
[    0.198390] cpuidle: using governor ladder
[    0.198390] ACPI: bus type PCI registered
[    0.198390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.200004] PCI: Using configuration type 1 for base access
[    0.217580] ACPI: Added _OSI(Module Device)
[    0.217940] ACPI: Added _OSI(Processor Device)
[    0.218293] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218673] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219086] ACPI: EC: EC started
[    0.219370] ACPI: EC: interrupt blocked
[    0.222270] ACPI: \: Used as first EC
[    0.222591] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.223021] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.223763] ACPI: Executed 1 blocks of module-level executable AML code
[    0.240673] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.242268] ACPI: Dynamic OEM Table Load:
[    0.242613] ACPI: SSDT 0xFFFF88007BD5D800 0002E9 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.246636] ACPI: Dynamic OEM Table Load:
[    0.247070] ACPI: SSDT 0xFFFF88007BC81000 0006DB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.254189] ACPI: Dynamic OEM Table Load:
[    0.256660] ACPI: SSDT 0xFFFF88007C6CB000 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.257695] ACPI: Dynamic OEM Table Load:
[    0.260047] ACPI: SSDT 0xFFFF88007C7DE540 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.264783] ACPI: Interpreter enabled
[    0.265199] ACPI: (supports S0 S5)
[    0.265579] ACPI: Using IOAPIC for interrupt routing
[    0.268058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270580] ACPI: GPE 0x02 active on init
[    0.272964] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.305839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305839] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[    0.305839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.306311] PCI host bridge to bus 0000:00
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.306311] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306721] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[    0.310006] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[    0.310006] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[    0.310006] pci 0000:00:02.0: reg 0x14: [io  0xf100-0xf107]
[    0.315634] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.315634] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[    0.315634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.315960] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.315960] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.316454] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.316454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.316867] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.316867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.317285] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.317285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.317706] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.317706] pci 0000:00:1d.0: reg 0x20: [io  0xf0a0-0xf0bf]
[    0.318128] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.318128] pci 0000:00:1d.1: reg 0x20: [io  0xf080-0xf09f]
[    0.318515] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.318515] pci 0000:00:1d.2: reg 0x20: [io  0xf060-0xf07f]
[    0.318938] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.318938] pci 0000:00:1d.3: reg 0x20: [io  0xf040-0xf05f]
[    0.319336] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.319336] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[    0.319336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.320072] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.320513] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.323112] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.323112] pci 0000:00:1f.2: reg 0x10: [io  0xf0f0-0xf0f7]
[    0.323112] pci 0000:00:1f.2: reg 0x14: [io  0xf0e0-0xf0e3]
[    0.323112] pci 0000:00:1f.2: reg 0x18: [io  0xf0d0-0xf0d7]
[    0.323112] pci 0000:00:1f.2: reg 0x1c: [io  0xf0c0-0xf0c3]
[    0.323112] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf02f]
[    0.323112] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[    0.323112] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.323324] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.324155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.324284] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[    0.324284] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x18: [mem 0xdfe11000-0xdfe11fff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x20: [mem 0xdfe10000-0xdfe10fff 64bit]
[    0.324284] pci 0000:02:00.0: supports D1
[    0.324284] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.324922] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.330068] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.330359] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.330469] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.330614] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[    0.332600] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[    0.333006] pci 0000:03:00.0: supports D1 D2
[    0.333011] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.333210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.333620] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.333630] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.333927] pci 0000:04:00.0: [8086:0896] type 00 class 0x028000
[    0.334057] pci 0000:04:00.0: reg 0x10: [mem 0xdfc00000-0xdfc01fff 64bit]
[    0.334763] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.334942] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.335350] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.335528] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.336039] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.336044] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336049] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336053] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.336057] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.336062] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.336066] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[    0.336070] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.336130] pci_bus 0000:00: on NUMA node 0
[    0.337515] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.338262] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.346039] ACPI: EC: interrupt unblocked
[    0.346039] ACPI: EC: event unblocked
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.348684] SCSI subsystem initialized
[    0.349211] libata version 3.00 loaded.
[    0.349211] ACPI: bus type USB registered
[    0.349789] usbcore: registered new interface driver usbfs
[    0.350039] usbcore: registered new interface driver hub
[    0.350749] usbcore: registered new device driver usb
[    0.351384] PCI: Using ACPI for IRQ routing
[    0.351384] PCI: pci_cache_line_size set to 64 bytes
[    0.351384] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f1b3000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f58f000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[    0.352856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.353253] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.355766] clocksource: Switched to clocksource hpet
[    0.356312] pnp: PnP ACPI init
[    0.357109] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.357615] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.357767] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.358214] system 00:01: [io  0x1000-0x1003] has been reserved
[    0.358667] system 00:01: [io  0x1010-0x101f] has been reserved
[    0.359103] system 00:01: [io  0xffff] has been reserved
[    0.359513] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.359952] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.359952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:02: [io  0x06a0-0x06af] has been reserved
[    0.359952] system 00:02: [io  0x06b0-0x06ff] has been reserved
[    0.359952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.359952] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.359952] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:06: [io  0x025d] has been reserved
[    0.359952] system 00:06: [io  0x025c] has been reserved
[    0.359952] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.360167] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.360645] system 00:06: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.361121] system 00:06: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.361592] system 00:06: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.362072] system 00:06: [mem 0xfec28000-0xfec2ffff] has been reserved
[    0.362553] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.363064] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.363263] pnp 00:07: Plug and Play ACPI device, IDs SYN1d1b SYN1d00 SYN0002 PNP0f13 (active)
[    0.363394] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.363524] system 00:09: [io  0x0240-0x0259] has been reserved
[    0.363991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.364879] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[    0.365372] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.365873] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.366363] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.366857] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367408] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.367898] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.368395] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.368805] system 00:0c: [io  0x0400-0x047f] has been reserved
[    0.369252] system 00:0c: [io  0x0500-0x053f] has been reserved
[    0.369693] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.370228] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.370705] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.371182] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.371676] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[    0.372171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372179] pnp: PnP ACPI: found 13 devices
[    0.380957] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.381648] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.381656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.381662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.381681] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.381688] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.381708] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.381726] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.381733] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.381781] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.382273] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.382870] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.383462] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.384060] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.384646] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.385095] pci 0000:00:1c.1: BAR 7: assigned [io  0x3000-0x3fff]
[    0.385545] pci 0000:00:1c.3: BAR 7: assigned [io  0x4000-0x4fff]
[    0.385998] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.386387] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.386830] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.387314] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.387902] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.388285] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.388736] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.389226] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.389817] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.390233] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.390690] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.391180] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.391775] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.392157] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.392608] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.393098] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.393700] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.394103] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.394108] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.394113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394122] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394126] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394131] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394135] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394140] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.394144] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.394149] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.394153] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.394158] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.394162] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.394166] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.394171] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.394175] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.394179] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.394184] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.394188] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.394193] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.394197] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.394202] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394206] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394210] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394215] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394219] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394224] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394458] NET: Registered protocol family 2
[    0.395149] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.395801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.396424] TCP: Hash tables configured (established 16384 bind 16384)
[    0.397028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.397512] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.398146] NET: Registered protocol family 1
[    0.398540] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.401674] PCI: CLS 64 bytes, default 64
[    0.404203] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    0.408673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.411230] io scheduler noop registered
[    0.411556] io scheduler deadline registered (default)
[    0.412180] gpio_it87: Unknown Chip found, Chip 0202 Revision 2
[    0.413720] hv_vmbus: registering driver hv_pci
[    0.414138] hv_vmbus: registering driver hyperv_fb
[    0.414552] intel_idle: MWAIT substates: 0x3020220
[    0.414554] intel_idle: v0.4.1 model 0x36
[    0.415019] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.415333] ACPI: AC Adapter [AC0] (on-line)
[    0.440589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.470262] ACPI: Lid Switch [LID]
[    0.470749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.471442] ACPI: Sleep Button [SLPB]
[    0.471890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.472528] ACPI: Power Button [PWRF]
[    0.474911] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.475996] thermal LNXTHERM:00: registered as thermal_zone0
[    0.476418] ACPI: Thermal Zone [THRM] (63 C)
[    0.477238] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.480090] Non-volatile memory driver v1.3
[    0.483829] loop: module loaded
[    0.484309] Guest personality initialized and is inactive
[    0.484904] VMCI host device registered (name=vmci, major=10, minor=63)
[    0.485403] Initialized host personality
[    0.485993] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[    0.487067] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[    0.488126] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170728/utaddress-247)
[    0.489188] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20170728/utaddress-247)
[    0.490317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.VGA.TCOI) (20170728/utaddress-247)
[    0.491442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.492164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.493231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.495362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.496081] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.497151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.498214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.498935] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.499659] VMware PVSCSI driver - version 1.0.7.0-k
[    0.500186] hv_vmbus: registering driver hv_storvsc
[    0.500738] ahci 0000:00:1f.2: version 3.0
[    0.501106] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.501649] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.502258] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
[    0.504418] scsi host0: ahci
[    0.505055] scsi host1: ahci
[    0.505678] scsi host2: ahci
[    0.506330] scsi host3: ahci
[    0.506778] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[    0.507357] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[    0.507918] ata3: DUMMY
[    0.508159] ata4: DUMMY
[    0.508915] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[    0.509469] hv_vmbus: registering driver hv_netvsc
[    0.509854] Fusion MPT base driver 3.04.20
[    0.510250] Copyright (c) 1999-2008 LSI Corporation
[    0.510709] Fusion MPT SPI Host driver 3.04.20
[    0.511120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.511607] ehci-pci: EHCI PCI platform driver
[    0.512763] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.513192] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.513793] ehci-pci 0000:00:1d.7: debug port 1
[    0.514113] ACPI: Battery Slot [BAT0] (battery present)
[    0.518488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.518522] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[    0.540123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.541063] hub 1-0:1.0: USB hub found
[    0.541418] hub 1-0:1.0: 8 ports detected
[    0.542734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.543221] ohci-pci: OHCI PCI platform driver
[    0.543620] ohci-platform: OHCI generic platform driver
[    0.544568] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.544990] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.546233] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010
[    0.547982] hub 2-0:1.0: USB hub found
[    0.548435] hub 2-0:1.0: 2 ports detected
[    0.549241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.549668] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.550303] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    0.550935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.551899] hub 3-0:1.0: USB hub found
[    0.552349] hub 3-0:1.0: 2 ports detected
[    0.553301] usbcore: registered new interface driver usb-storage
[    0.553955] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.556563] i8042: Detected active multiplexing controller, rev 1.1
[    0.559170] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.559568] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.559965] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.560407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.560808] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.561255] hv_vmbus: registering driver hyperv_keyboard
[    0.561774] rtc_cmos 00:03: RTC can wake from S4
[    0.562370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.562869] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.564393] sdhci: Secure Digital Host Controller Interface driver
[    0.564865] sdhci: Copyright(c) Pierre Ossman
[    0.566006] hidraw: raw HID events driver (C) Jiri Kosina
[    0.566486] hv_vmbus: registering driver hid_hyperv
[    0.566915] usbcore: registered new interface driver usbhid
[    0.567337] usbhid: USB HID core driver
[    0.567684] hv_utils: Registering HyperV Utility Driver
[    0.568088] hv_vmbus: registering driver hv_util
[    0.568454] hv_vmbus: registering driver hv_balloon
[    0.569382] NET: Registered protocol family 10
[    0.570351] Segment Routing with IPv6
[    0.570715] NET: Registered protocol family 17
[    0.571097] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.571999] 8021q: 802.1Q VLAN Support v1.8
[    0.572509] NET: Registered protocol family 40
[    0.573685] microcode: sig=0x30661, pf=0x8, revision=0x10c
[    0.574234] microcode: Microcode Update Driver: v2.2.
[    0.574273] sched_clock: Marking stable (573441123, 0)->(657968060, -84526937)
[    0.575503] registered taskstats version 1
[    0.576740] rtc_cmos 00:03: setting system clock to 2018-09-07 16:15:12 UTC (1536336912)
[    0.584900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.831528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.834278] ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
[    0.834837] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.837583] ata1.00: configured for UDMA/133
[    0.838642] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5
[    0.841240] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.841885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.842433] sd 0:0:0:0: [sda] Write Protect is off
[    0.842862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.843052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.877982]  sda: sda1 sda2
[    0.880409] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.171549] ata2: SATA link down (SStatus 0 SControl 300)
[    1.186977] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[    1.194364] Freeing unused kernel memory: 1052K
[    1.230632] Write protecting the kernel read-only data: 12288k
[    1.235448] Freeing unused kernel memory: 2024K
[    1.252890] Freeing unused kernel memory: 736K
[    1.487895] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[    1.488460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[    1.566812] init: Console is alive
[    1.796421] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    1.821964] pps_core: LinuxPPS API ver. 1 registered
[    1.822364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.823647] PTP clock support registered
[    1.824343] Button Hotplug driver version 0.4.1
[    1.824818] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    1.830753] init: - preinit -
[    1.890124] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.267747] random: jshn: uninitialized urandom read (4 bytes read)
[    2.309827] random: jshn: uninitialized urandom read (4 bytes read)
[    2.316834] random: jshn: uninitialized urandom read (4 bytes read)
[    2.470351] usb 1-7: new high-speed USB device number 4 using ehci-pci
[    2.490506] clocksource: Switched to clocksource tsc
[    2.691721] usb-storage 1-7:1.0: USB Mass Storage device detected
[    2.692832] scsi host4: usb-storage 1-7:1.0
[    3.754161] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.765748] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.433172] urandom_read: 5 callbacks suppressed
[    5.433177] random: jshn: uninitialized urandom read (4 bytes read)
[    5.722679] F2FS-fs (loop0): Mounted with checkpoint version = 1a030d9d
[    5.751832] mount_root: switching to f2fs overlay
[    5.833723] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    5.839672] urandom-seed: Seeding with /etc/urandom.seed
[    5.914891] procd: - early -
[    6.557234] procd: - ubus -
[    6.596946] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.610617] procd: - init -
[    6.950178] kmodloader: loading kernel modules from /etc/modules.d/*
[    6.954303] tun: Universal TUN/TAP device driver, 1.6
[    6.958028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.958547] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.961325] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    6.961834] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.964069] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.426558] Netfilter messages via NETLINK v0.30.
[    7.428839] ip_set: protocol 6
[    7.450984] i2c /dev entries driver
[    7.487885] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    7.488578] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    7.492106] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.492562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.494282] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.898600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.147745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.149259] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000000b000, e8:40:f2:3f:a9:58, XID 00a00000 IRQ 30
[    8.154185] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[    8.155901] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    8.174092] xt_time: kernel timezone is -0000
[    8.411155] Intel(R) Wireless WiFi driver for Linux
[    8.411610] Copyright(c) 2003- 2015 Intel Corporation
[    8.445655] PPP generic driver version 2.4.2
[    8.447497] NET: Registered protocol family 24
[    8.454488] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    8.455168] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUG disabled
[    8.455610] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
[    8.456054] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
[    8.456529] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[    8.501089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.504079] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.792405] r8169 0000:03:00.0 eth0: link down
[   11.792453] r8169 0000:03:00.0 eth0: link down
[   11.903937] random: fast init done
[   13.415479] r8169 0000:03:00.0 eth0: link up
[   30.131354] random: crng init done
09.10.20192541KernelBug ReportMediumLowHardware offloading causes some flows to fail to be NAT...openwrt-19.07New Task Description

Just after a reboot, some flows are not NATed: packets from a machine in the LAN are sent to the WAN port with a private source IP address.

This is on a Linksys RE6500 (ramips mt7621) running openwrt 19.07-SNAPSHOT r10578-b3d70f628.
It is configured with flow_offloading and flow_offloading_hw.

Here is a tcpdump capture showing the problem on the WAN port (172.23.184.0/24 is my LAN address space):

root@openwrt:~# tcpdump -n -i eth0.20 net 172.23.184.0/24
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0.20, link-type EN10MB (Ethernet), capture size 262144 bytes
18:51:21.756552 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 112
18:51:22.651556 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148
18:51:26.681032 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 768
18:51:27.771654 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148

Here is what conntrack -L says:

udp      17 55 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=93 bytes=20412 [UNREPLIED] src=91.224.XX.YY dst=172.23.184.119 sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Notice the second dst= that shows the private IP address of the LAN machine.

After restarting the firewall, the flow is correctly NAT-ed and conntrack -L shows the correct entry (193.33.ZZ.WW is my public IP address):

udp      17 175 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=4 bytes=704 [UNREPLIED] src=91.224.XX.YY dst=193.33.ZZ.WW sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Note: when I only enable flow_offloading, the issue does not appear anymore, so this really seems to be an issue with the hw offloading integration in the firewall.

29.01.20202781Base systemBug ReportLowMediumArcher C50 v4 Mac80211 Looses Internet Access after 20’...openwrt-19.07New Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Problem Device:
TP-Link Archer C50 (Canadian) v4 + v4.2

Software version:
openwrt 19.07 r10860, default packages versions.

Steps to reproduce:
Setup wireless like below. I’ve intentionally left encryption set to “none” for both radio’s for quick testing but i’ve tested with WPA2 CCMP encryption with no change in results.

config wifi-device ‘radio0’ option type ‘mac80211’ option channel ‘11’ option hwmode ‘11g’ option path ‘platform/10300000.wmac’ option htmode ‘HT20’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio0’ option device ‘radio0’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

config wifi-device ‘radio1’ option type ‘mac80211’ option hwmode ‘11a’ option path ‘pci0000:00/0000:00:00.0/0000:01:00.0’ option htmode ‘VHT80’ option channel ‘112’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio1’ option device ‘radio1’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

Alternative Settings:

htmode ‘HT40’ No change in results
channel ‘1’, ‘6’, ‘11’ No change in results
disassoc_low_ack ‘0’ No change in results

25.02.20202856Base systemBug ReportVery LowHighWifi "dies" (hostapd drops all clients) on some ar71xx ...openwrt-19.07New Task Description

This issue is very strange, i don’t even know if it’s just faulty hardware but i have it happening on multiple devices now

Most affected hardware

  • Nanobridge M5 , in this case transmitting enough data can trigger it almost instantly
  • TL-WR841ND , in this case i had it happen like 3-4 times a year
  • CPE 210 v3 , in this case it happens like each week

For the last one, which is running 19.07 i found on the system log

Tue Feb 25 07:38:58 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED [redacted mac1]
Tue Feb 25 07:38:58 2020 daemon.info hostapd: wlan0: STA [redacted mac1] IEEE 802.11: disassociated due to inactivity
Tue Feb 25 07:38:59 2020 daemon.info hostapd: wlan0: STA [redacted mac1] IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Feb 25 07:41:32 2020 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED [redacted mac2]
Tue Feb 25 07:41:32 2020 daemon.info hostapd: wlan0: STA [redacted mac2] IEEE 802.11: disassociated due to inactivity
Tue Feb 25 07:41:33 2020 daemon.info hostapd: wlan0: STA [redacted mac2] IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Feb 25 07:42:49 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 07:49:55 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 07:55:02 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:00:15 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:05:25 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:10:44 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
Tue Feb 25 08:16:00 2020 daemon.notice hostapd: wlan0: AP-STA-POLL-OK [redacted mac3]
09.02.2017488Base systemBug ReportVery LowMediumdynamic VLAN doesn't work on ath10kopenwrt-19.07Unconfirmed Task Description

Dynamic vlan config on ath10k seems not to work. Same config on ath9k works fine.

Config:

config wifi-device  radio0
        option type     mac80211
        option channel  36
        option hwmode   11a
        option path     'pci0000:01/0000:01:00.0'
        option htmode   VHT80
[...]

config wifi-iface
        option device   radio0
        option network  vlan1
        option mode     ap
[...]
        option dynamic_vlan     '1'
        option 'vlan_tagged_interface' 'eth1'
        option 'vlan_bridge' 'br-vlan'
        option 'vlan_naming' '0'

Log:

Thu Feb  9 15:54:37 2017 daemon.err hostapd: WPA initialization for VLAN 1 failed (-1)
Thu Feb  9 15:54:37 2017 daemon.err hostapd: WPA deinit of wlan0.1 failed
Thu Feb  9 15:54:37 2017 daemon.debug hostapd: wlan0: STA ac:22:0b:a1:c7:6b IEEE 802.11: could not add dynamic VLAN interface for vlan=1
29.06.20181622Base systemBug ReportVery LowMediumDSA switch port vlanopenwrt-19.07Unconfirmed Task Description

Device: Turris Omnia
Version: OpenWRT-18.06-rc1

Steps to reproduce:

Network configuration:

config interface 'lan'
        option type 'bridge'
        option ifname 'lan0 lan1 lan2 lan3 lan4.1'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'

config interface 'dmz'
        option type 'bridge'
        option ifname 'lan4.2'
        option proto 'static'
        option ipaddr '192.168.2.1'
        option netmask '255.255.255.0'

From router, I have ping with the other device on both vlan:

# ping -c 3 192.168.1.5
PING 192.168.1.5 (192.168.1.5): 56 data bytes
64 bytes from 192.168.1.5: seq=0 ttl=64 time=0.434 ms
64 bytes from 192.168.1.5: seq=1 ttl=64 time=0.335 ms
64 bytes from 192.168.1.5: seq=2 ttl=64 time=0.333 ms

--- 192.168.1.5 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.333/0.367/0.434 ms

# ping -c 3 192.168.2.5
PING 192.168.2.5 (192.168.2.5): 56 data bytes
64 bytes from 192.168.2.5: seq=0 ttl=64 time=0.455 ms
64 bytes from 192.168.2.5: seq=1 ttl=64 time=0.341 ms
64 bytes from 192.168.2.5: seq=2 ttl=64 time=0.337 ms

--- 192.168.2.5 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.337/0.377/0.455 ms

But from other device connected to lan0 port I can’t do ping. More exactly, the situation is the next:

  • All work as expected in the next cases:
    • movile → tun0 (openvpn) → br-lan → lan4.1 (part of br-lan) → remote device
    • tablet → wlan0 (part of br-lan) → lan4.1 (part of br-lan) → remote device
  • It do not work as expected in the next case:
    • PC linux → lan0 (part of br-lan) → lan4.1 (part of br-lan) → remote device
20.10.20181903Base systemBug ReportVery LowMediumHotplug event triggered too earlyopenwrt-19.07Unconfirmed Task Description

DEVICE: TP-Link Archer C7 v2
SYSTEM: OpenWRT 18.06.1
PACKAGES: base + luci, ca-certificates, ddns-scripts_no-ip_com, luci-app-ddns, wget, ip, ppp, ppp-mod-pppoe, vim, nano, usbutils, usb-modeswitch, kmod-usb-core,

        kmod-usb-serial, kmod-usb-serial-option, kmod-usb-net-cdc-ncm, kmod-usb-net-huawei-cdc-ncm, picocom, sqm-scripts, luci-app-sqm, kmod-ledtrig-heartbeat, htop

If the USB Device (HUAWEI E3372 LTE Stick) is left connected to the router during a reboot/boot, the hotplug event is triggered too early and the device has not yet all interfaces mapped in the /dev directory.
More specifically, my hotplug script wants to find the name of the interface (which is “ttyUSB0” in my case) by looking at the $DEVPATH directory, but during the hotplug script execution the link does not yet exist. Adding a “sleep” inside the script does not help, but executing a subscript via “exec script &” shows that after 3 seconds the link is created.
Attached is a file showing the directory listing of $DEVPATH during the hotplug event, and 3 seconds after the hotplug event.

Note that the hotplug script works as intended during actual hotplugging. This bug only presents itself during boot/reboot.
Also note that this was working on OpenWRT 15.05.1 (same Router, Stick and hotplug script)

16.02.20192125Base systemBug ReportVery LowMediumdropbear race condition with ipv6 networkingopenwrt-19.07Unconfirmed Task Description

I’m running OpenWRT on an x86 machine running OpenWRT 18.06.2.

Steps to reproduce:

Configure dropbear to only listen on an interface such as ‘lan’

 
  config dropbear
    option Interface 'lan'

After rebooting, often dropbear will be bound to 192.168.1.1, but not fd00:2233:4455:1::1 (router’s ipv6 address). Restarting dropbear fixes the problem and it binds correctly to the ipv4 and ipv6 lan address.

21.02.20192139Base systemBug ReportVery LowMedium broadcom-wl don't work on rt-n16openwrt-19.07Unconfirmed Task Description

wifi on lede 17.01.6, with the same config, works great
install openwrt 18.06
opkg remove kmod-b43 kmod-b43legacy kmod-mac80211 kmod-cfg80211 kmod-brcmsmac
opkg install kmod-brcm-wl nas wlc wl
wl -i wl0 chanspec -c 9 -b 2 -w 40 -s -1

config wifi-device ‘wl0’

      option type 'broadcom'
      option channel '9'
      option hwmode '11ng'
      option htmode 'HT40'
      option txpower '16'
      option txantenna '3'
      option rxantenna '3'

config wifi-iface

      option device 'wl0'
      option network 'lan'
      option mode 'ap'
      option ssid 'point'
      option encryption 'psk2'
      option key 'pass'
      option wmm '1'
      option disabled '0'

After, my laptop (windows) does not connect and the phone on the android
connects for 15-20 minutes, disconnects, manually connects from the third fourth attempt
and disconnects again after a while

ifconfig shows that the interface wl0-1 is automatically created with non-existent mac address E2:CB:4E:C0:18:14 (wl0 E0:CB:4E:C0:18:13)
Wi-Fi scanner shows two access points with the same name, channels, but different MAC addresses (E2:CB:4E:C0:18:14, E0:CB:4E:C0:18:13)

I compiled two firmware with
CONFIG_TARGET_brcm47xx=y
CONFIG_TARGET_brcm47xx_mips74k=y
CONFIG_TARGET_brcm47xx_mips74k_DEVICE_asus-rt-n16=y
and
CONFIG_TARGET_brcm47xx=y
CONFIG_TARGET_brcm47xx_mips74k=y
CONFIG_TARGET_brcm47xx_mips74k_Broadcom-mips74k-wl=y

but it did not help

 



16.03.20192191Base systemBug ReportVery LowMediumTP-Link WBS210 Images brokenopenwrt-19.07Unconfirmed Task Description

I cannot install the 18.06.1 and 18.06.2 Images on my TP-Link WBS210. For the openwrt-18.06.x-ar71xx-generic-wbs210-v1-squashfs-sysupgrade.bin image I get the message:

“The uploaded image file does not contain a supported format. Make sure that you choose the generic image format for your platform.”

Up to version 18.06.0 everything worked fine.

28.03.20192208KernelBug ReportVery LowMediumUAS support for USB3.0 drivesopenwrt-19.07Unconfirmed Task Description

UAS module is loaded fine on Linksys WRT3200ACM with openwrt 18.06 but when plugging a USB 3.0 drive (for example a USB 3.0 external HDD) it does not load in the right way and device ends using driver usb-storage, which prevents of using device at full speed.

Steps to reproduce: Plug a USB 3.0 external HDD to USB 3.0 port of any openwrt 18.06 device and check speed when copying a file to the external HDD, it should be around 100+ MBps

Any needed additional info can be found at this forum question: https://forum.openwrt.org/t/usb3-0-hdd-issues/34031/13


29.09.20192523KernelBug ReportVery LowHighRB750 randomly reboots after kernel warningsopenwrt-19.07Unconfirmed Task Description

Mikrotik RB750Gr3
LuCI openwrt-19.07 branch (git-19.267.59428-7b36dae) / OpenWrt 19.07-SNAPSHOT r10532-cf3b50377e

Router randomly reboots (it may be stable for hours or can reboot in a minute after power up). Seems like kernel problem.

Here are some logs I managed to fetch before the reboots:

Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.010562] ------------[ cut here ]------------
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.015202] WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_output.c:2509 0x803cc8bc
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.022158] invalid inflight: 1 state 1 cwnd 10 mss 1388
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.027441] Modules linked in: qcserial pppoe ppp_async option cdc_mbim usb_wwan sierra_net sierra rndis_host qmi_wwan pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cdc_ncm cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT wireguard usbserial usbnet usblp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.097872]  nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables crc_ccitt cdc_wdm cdc_acm fuse ledtrig_usbport gpio_beeper input_core xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip6_udp_tunnel udp_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd ehci_platform
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.169233]  sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common mii crc32c_generic
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.180291] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.143 #0
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.186357] Stack : 00000000 00000000 00000000 81230398 00000000 00000000 00000000 00000000
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.194691]         00000000 00000000 00000000 00000000 00000000 00000001 8fc0dd30 ac07f596
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.203026]         8fc0ddc8 00000000 00000000 00004ea0 00000038 8049db58 00000007 00000000
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.211359]         00000000 80550000 0002c043 00000000 8fc0dd10 00000000 80570000 8050c6a0
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.219690]         803cc8bc 000009cd 812303d8 81230398 00000000 802af9e8 00000008 805b0008
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.228022]         ...
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.230459] Call Trace:
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.230475] [<8049db58>] 0x8049db58
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.236372] [<803cc8bc>] 0x803cc8bc
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.239840] [<802af9e8>] 0x802af9e8
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.243312] [<800101a0>] 0x800101a0
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.246782] [<800101a8>] 0x800101a8
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.250250] [<80486a9c>] 0x80486a9c
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.253722] [<800758a0>] 0x800758a0
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.257243] [<80032588>] 0x80032588
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.260714] [<803cc8bc>] 0x803cc8bc
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.264185] [<80032610>] 0x80032610
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.267654] [<803cc8bc>] 0x803cc8bc
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.271126] [<803cf3d0>] 0x803cf3d0
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.274596] [<8009d750>] 0x8009d750
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.278064] [<803cf7a8>] 0x803cf7a8
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.281537] [<8009dd80>] 0x8009dd80
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.285007] [<803cf770>] 0x803cf770
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.288474] [<8008c2cc>] 0x8008c2cc
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.291945] [<8008c588>] 0x8008c588
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.295413] [<8007cee8>] 0x8007cee8
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.298883] [<804a49b8>] 0x804a49b8
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.302357] [<80036f14>] 0x80036f14
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.305827] [<8025d440>] 0x8025d440
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.309296] [<8000b488>] 0x8000b488
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.312764]
Sun Sep 29 20:08:08 2019 kern.warn kernel: [   92.314310] ---[ end trace a36c893f27b6a6f3 ]---
Sun Sep 29 18:56:25 2019 kern.alert kernel: [ 2442.525228] CPU 1 Unable to handle kernel paging request at virtual address 00000010, epc == 803be4a0, ra == 803c4104
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.535821] Oops[#1]:
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.538087] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W       4.14.143 #0
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.545363] task: 8fc3be80 task.stack: 8fc5c000
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.549869] $ 0   : 00000000 00000001 0000004a 00000000
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.555080] $ 4   : 8ea76f3c 00000001 0000d706 00000000
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.560290] $ 8   : 00034501 00000321 811d7440 00000322
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.565501] $12   : 8ea22180 8ea22180 8e9a8e00 00000000
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.570712] $16   : 8ea76e40 00001204 6375f4c6 ffffffff
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.575923] $20   : 00001204 00000001 00000000 00000002
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.581133] $24   : 00000000 8034b220
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.586344] $28   : 8fc5c000 8fc0bbb8 00000000 803c4104
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.591555] Hi    : 0000caa1
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.594419] Lo    : 47aec5c8
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.597285] epc   : 803be4a0 0x803be4a0
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.601098] ra    : 803c4104 0x803c4104
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.604912] Status: 11007c03      KERNEL EXL IE
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.609082] Cause : 40800008 (ExcCode 02)
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.613066] BadVA : 00000010
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.615931] PrId  : 0001992f (MIPS 1004Kc)
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.620003] Modules linked in: qcserial pppoe ppp_async option cdc_mbim usb_wwan sierra_net sierra rndis_host qmi_wwan pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cdc_ncm cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT wireguard usbserial usbnet usblp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.690391]  nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables crc_ccitt cdc_wdm cdc_acm fuse ledtrig_usbport gpio_beeper input_core xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip6_udp_tunnel udp_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd ehci_platform
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.761710]  sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common mii crc32c_generic
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.772740] Process swapper/1 (pid: 0, threadinfo=8fc5c000, task=8fc3be80, tls=00000000)
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.780788] Stack : 00000204 8034def4 8ea76e40 00000000 8ea76e40 8ea76e40 00001204 803c4104
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.789123]         8f346480 8056ba00 00000000 8015000a 00018bc3 8fc0bc74 00000004 00000000
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.797457]         80550000 8ea76f3c 00000002 00000001 91946e37 00000000 00000018 91946e37
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.805791]         00000000 91946e37 00000000 00000001 80570000 8050c458 00000000 00000002
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.814125]         00018bc3 00000018 8ee92564 8e9a0600 00000000 00000000 00000001 00000000
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.822457]         ...
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.824891] Call Trace:
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.824903] [<8034def4>] 0x8034def4
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.830852] [<803c4104>] 0x803c4104
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.834335] [<8015000a>] 0x8015000a
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.837825] [<803c4efc>] 0x803c4efc
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.841318] [<803c6f34>] 0x803c6f34
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.844788] [<803a98a0>] 0x803a98a0
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.848313] [<803d1bc0>] 0x803d1bc0
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.851802] [<803d2f18>] 0x803d2f18
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.855307] [<8e86426c>] 0x8e86426c [nf_conntrack_ipv4@8e864000+0x1420]
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.861893] [<803a9da0>] 0x803a9da0
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.865406] [<803aa078>] 0x803aa078
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.868887] [<803a9940>] 0x803a9940
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.872360] [<803a9c10>] 0x803a9c10
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.402270] ------------[ cut here ]------------
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.406908] WARNING: CPU: 1 PID: 0 at net/ipv4/tcp_output.c:2509 0x803cc8bc
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.413864] invalid inflight: 1 state 1 cwnd 10 mss 1388
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.419148] Modules linked in: qcserial pppoe ppp_async option cdc_mbim usb_wwan sierra_net sierra rndis_host qmi_wwan pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cdc_ncm cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT wireguard usbserial usbnet usblp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.489628]  nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables crc_ccitt cdc_wdm cdc_acm fuse ledtrig_usbport gpio_beeper input_core xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip6_udp_tunnel udp_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd ehci_platform
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.561103]  sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common mii crc32c_generic
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.572189] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.143 #0
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.578264] Stack : 00000000 00000000 00000000 81222398 00000000 00000000 00000000 00000000
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.586600]         00000000 00000000 00000000 00000000 00000000 00000001 8fc0bd30 ac07f596
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.594938]         8fc0bdc8 00000000 00000000 00004f18 00000038 8049db58 00000007 00000000
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.603273]         00000000 80550000 0008bb1d 00000000 8fc0bd10 00000000 80570000 8050c6a0
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.611605]         803cc8bc 000009cd 812223d8 81222398 00000000 802af9e8 00000004 805b0004
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.619937]         ...
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.622376] Call Trace:
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.622394] [<8049db58>] 0x8049db58
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.628288] [<803cc8bc>] 0x803cc8bc
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.631755] [<802af9e8>] 0x802af9e8
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.635228] [<800101a0>] 0x800101a0
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.638699] [<800101a8>] 0x800101a8
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.642170] [<80486a9c>] 0x80486a9c
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.645638] [<800758a0>] 0x800758a0
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.649107] [<80032588>] 0x80032588
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.652580] [<803cc8bc>] 0x803cc8bc
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.656052] [<80032610>] 0x80032610
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.659528] [<803cc8bc>] 0x803cc8bc
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.663008] [<803cf3d0>] 0x803cf3d0
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.666478] [<8009d750>] 0x8009d750
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.669947] [<803cf7a8>] 0x803cf7a8
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.673420] [<8009dd80>] 0x8009dd80
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.676890] [<803cf770>] 0x803cf770
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.680358] [<8008c2cc>] 0x8008c2cc
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.683829] [<80063018>] 0x80063018
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.687300] [<8008c588>] 0x8008c588
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.690768] [<8007cee8>] 0x8007cee8
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.694244] [<804a49b8>] 0x804a49b8
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.697717] [<80036f14>] 0x80036f14
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.701185] [<8025d440>] 0x8025d440
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.704662] [<8000b488>] 0x8000b488
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.708131]
Sun Sep 29 18:19:29 2019 kern.warn kernel: [  226.709665] ---[ end trace 0dde230055179878 ]---
07.10.20192537Base systemBug ReportVery LowMediumAth9k on Archer C7 v2: disassociated due to inactivityopenwrt-19.07Unconfirmed Task Description

Hello

Every few weeks I have to restart the 2.4 GHz radio or reboot my Archer C7 v2 router otherwise no client can connect to it.
All stations end up being “deauthenticated due to inactivity” and can’t reconnect.

Tested on OpenWRT 18.06.4. It is quite hard to reproduce for me as it doesn’t happen frequently.

Forum post: https://forum.openwrt.org/t/ath9k-on-archer-c7-v2-disassociated-due-to-inactivity/13328

16.11.20192607PackagesBug ReportVery LowLowodhcpd: assigns IPv4 address outside of interface subne...openwrt-19.07Unconfirmed Task Description

When a static IPv4 lease is set up for a MAC address, odhcpd assigns that address even if it is outside the configured subnet of the relevant interface.

This is a problem if one wants to set a static lease for a host that may connect to one of multiple interfaces. It is also not possible to set separate static leases for each interface, as only the last one is used.

Software versions of OpenWrt/LEDE release, packages, etc:

Trunk and 19.07.
18.06 is unaffected.

It looks like this was introduced with https://git.openwrt.org/?p=project/odhcpd.git;a=commit;h=ca8ba91c757b1559bc6391707547d54477c8315a.

Steps to reproduce:

Steps based on fresh install of OpenWrt:

Replace odhcpd-ipv6only by odhcpd

Enable odhcpd for IPv4 and set static lease with IPv4 address outside the default lan subnet:

uci set dhcp.odhcp.maindhcp=1
uci set dhcp.lan.dhcpv4="server"

uci add dhcp host
uci set dhcp.@host[-1].mac="11:22:33:44:55:66"
uci set dhcp.@host[-1].ip="192.168.2.100"

uci commit dhcp

Expected result: IP address from 192.168.1.0/24 is assigned to host 11:22:33:44:55:66
Actual result: IP address 192.168.2.100 is assigned to host 11:22:33:44:55:66

17.11.20192608Base systemBug ReportVery LowLowsysntpd cannot acquire time on IPv6 only networkopenwrt-19.07Unconfirmed Task Description

I’ve encountered an issue with ntpd in OpenWrt where it cannot acquire the time on an IPv6 only network, it seems that the issue lies in dns resolution by ntpd as specifying an IPv6 address instead of a domain works as expected.

By the way, I believe only 2.pool.ntp.org returns IPv6 addresses in case anyone tries to reproduce my issue.

Possibly relevant: https://dev.archive.openwrt.org/attachment/ticket/12167/0001-busybox-make-ntpd-prefer-IPv6-addresses.patch

23.11.20192623Base systemBug ReportVery LowMediumJumbo Frames not possible on Archer C7 v5openwrt-19.07Unconfirmed Task Description

ip link set mtu 9000 dev eth0
RTNETLINK answers: Invalid argument

swconfig dev eth0 show

no sign of jumbo frames.

Only a payload of 1474 can be transmitted over a mtu 9000 core network, effectively.

Related issue:
https://dev.archive.openwrt.org/ticket/18296

25.11.20192631Base systemBug ReportVery LowMediumsysntp often fails when using DHCP provided serveropenwrt-19.07Unconfirmed Task Description

I’m managing a network with 25 openwrt WLAN access points (mostly TL-WR1043ND v1, a few v2 and a few zbt-2626) and since updating to 19.07 some devices often have an incorrect time. All are configured to get their NTP server from DHCP and this happen on all models.

When this happen ntpd is simply not running and starting it restore the correct time right away. It is hard to says if ntpd crash or if it never started in the first place. Last time I checked all affected devices had been restarted recently so I would first suspect some race condition during boot.

28.11.20192640Base systemBug ReportVery LowLowFailed to sync jffs2 overlayopenwrt-19.07Unconfirmed Task Description

GL-B1300
19.07-SNAPSHOT

Every time I run a sys upgrade I get “failed to sync jffs2 overlay” message in the log (log is configured during the setup by a custom script under /etc/uci-defaults). The error happens during execution of the command: “cp -a /tmp/root/upper/* / 2>/dev/null” in “libfstools/overlay.c”. By the time the copy command runs, the files under /etc/uci-defaults are already deleted and it looks like the “deletion marker” files cannot be copied in this case.

I re-run the command myself after a successful upgrade and got the following logs.

cp -a /tmp/root/upper/* /root/test/
cp: can’t create ‘/root/test/etc/uci-defaults/luci-sqm’: Operation not permitted
cp: can’t create ‘/root/test/etc/uci-defaults/ddns’: Operation not permitted
cp: can’t create ‘/root/test/etc/uci-defaults/bcp38’: Operation not permitted

ls -la /tmp/root/upper/etc/uci-defaults/
c——— 1 root root 0, 0 Nov 26 16:48 bcp38
c——— 1 root root 0, 0 Nov 26 16:48 ddns
c——— 1 root root 0, 0 Nov 26 16:48 luci-sqm

More details: https://forum.openwrt.org/t/getting-error-failed-to-sync-jffs2-overlay/47742


01.12.20192647Base systemBug ReportVery LowHighEA6350v3 (IPQ4018) memory usage climbs until processes ...openwrt-19.07Unconfirmed Task Description

Device is Linksys EA6350v3

Issue occurs on 19.07 rc1, 19.07 rc2 and snapshot r11595 (snapshot version is by memory, but pretty sure that’s what I had on it).

Information for this bug report is based on 19.07 rc2 with the following packages installed for future potential use, but most not in use:
luci-app-sqm luci-proto-wireguard luci-app-wireguard ca-bundle curl https_dns_proxy luci-app-https_dns_proxy luci-app-statistics luci-app-samba kmod-usb-printer p910nd luci-app-p910nd diffutils minidlna luci-app-minidlna

Note: sqm, wireguard, https_dns_proxy, samba, usb printer, p910nd server, and minidlna are NOT in use. These are just the typical packages I add to my
router for future use.

Steps to reproduce:
Problem occurs after router runs for a few hours. EA6350v3 is set up as a wired access point for an EdgeRouter X (also on 19.07 rc2). The Edgerouter provides sqm and DNS and DHCP for LAN, guest and IOT VLANs. There are ~3 “Guest” 2.4 G wifi clients (a smart switch, an IP camera, a DEEBOT vacuum); the IOT VLAN is mapped to a physical port with an Ooma Telo plugged in (I know - I need to map the guest devices to IOT wifi someday...). The LAN is mapped to a physical port with a Roku 3 plugged in and to normal wifi. There are another ~4 or 5 5GHz wifi clients on the LAN wifi (a laptop, a couple Amazon Echo’s, a Google Home Mini, a Samsung Orbit Android phone) and a 2.4G LG Android phone on the 2.4 GHz wifi. CPU loading is quite low.

Memory usage starts out rather high (~100MB, climbs and climbs, eventually drops, climbs again, repeats. Eventually (a day or two) processes start getting killed to free up memory and things start dying. I have an EA8500 setup almost identically as a second AP in the house, and it’s memory usage sits around 50 MB versus 100MB to 200+MB for the EA6350v3. Something’s just not right...

The final message in the logs that repeats until processes begin to get killed is:

kern.warn kernel: [15897.905286] ath10k_ahb a000000.wifi: failed to increase tx pending count: -16, dropping

But the weird memory usage pattern precedes this message in the logs.

I’ve attached memory usage graphs and system and kernel logs from 19.07 rc2 to illustrate the problem. rc1 and snapshot behaved the same. This post also has logs showing processes getting killed if that helps diagnose: https://forum.openwrt.org/t/ipq4018-linksys-ea6350v3-wifi-dead-after-24-48-hrs/49080/3?u=eginnc

10.12.20192667Base systemBug ReportVery LowMediumLantiq specific, "dsl interfae" VDSL driver, unhelpful ...openwrt-19.07Unconfirmed Task Description

Probably, FAO "John Crispin" Lantiq maintainer, apparently!,

On OpenWRT 19.07.0rc2, both on TP-LINK TD-W8980 and also BT-Homehub-v5-type-A [lantiq xrx200 devices] ...

I am finding a consistent frustrating limitation, that the default config, and LuCI web interface, does not provide any way to expose the MTU capability of the built-in VDSL driver, which allows for full 1500 MTU to be carried on PPPoE on VDSL, as is commonplace in provided routers.

Specifically, the VDSL device "dsl0" (and, in my case, VLAN 101, "dsl0.101"), has an unhelpful default MTU restriction to 1500, such that PPPoE (as is common in UK!) does not work at the normally expected 1500MTU, requiring workarounds 1492MTU MSS-clamping hacks. Turns out this is fixable at the configuration-level, but not via anything exposed in web-interface (as underlying DSL MTU is wrong from the start...).

Example below, extra /etc/config/network lines to support the standard MTU:-

config interface 'wan'

      option ifname 'dsl0.101'
      option proto 'pppoe'
      option password 'PASSWORD'
      option ipv6 'auto'
      option username 'USERNAME'
      option mtu '1500'           #exposed via web, still needs setting, to try to negotiate that MTU 1500 inside PPPoE...

config device 'wan_dev'

      option name 'dsl0'
      option macaddr 'e8:11:22:33:44:4b'
      option mtu '1508'           #This line Had to be added manually

config device 'wan_dev2' # Extra section added, if not done,

      option name 'dsl0.101'             #  MTU wrong for the dsl 0.101 link!
      option macaddr 'e8:11:22:33:44:4b' #  As in this case having to use VLAN101
      option mtu '1508'                  #  As per UK Openreach VDSL configuration...

In my view, at the very least, the 'internal' DSL driver, should be allowing a larger mtu like 1508, 'by default'. Possibly, if this is done at driver level, the PPPoE MTU won't need to be specified at all.

The PPPoE over VDSL configuration, also needed to be told to attempt 1500 MTU, which I understand relies upon rfc4638 PPP extension, in order to have fully functional 1500MTU connection. Not having this has caused connectivity issues requiring MSS clamping etc. and is, in short, undesirable!.

It think, the PPPoE over PTM over VDSL should, additionally, attempt this 1500-MTU 'by default' unless the MTU is reduced manually in the configuration.

I understand this should be passed to Lantiq maintainer, "John Crispin" apparently!, according to IRC-discussions!.

With many thanks,

12.12.20192670KernelBug ReportVery LowHigh[ATH79] unstable USB on WR1043 v2openwrt-19.07Unconfirmed Task Description

Hi there!

I recently upgraded my TP-Link TL-WR1043 v2 device to the ath79 targeted 19.07-rc2 release using my custom build, which I have compiled with the image builder.

make image PROFILE=tplink_tl-wr1043nd-v2 PACKAGES="block-mount curl diffutils ethtool iperf3 iwinfo htop kmod-fs-ext4 kmod-usb-storage luci mailsend-nossl minidlna nfs-kernel-server ppp-mod-pppoe shadow-su transmission-daemon-mbedtls transmission-web vsftpd zram-swap -ip6tables -kmod-ip6tables -kmod-ipv6 -kmod-nf-conntrack6 -kmod-nf-ipt6 -libopenssl1.1 -odhcp6c -odhcpd-ipv6only -luci-proto-ipv6 -libip6tc2"

I just recently rolled back to an EXT4 partition, because of it's smaller memory footprint. (just mounting a ~50GB f2fs partition consumes around 10MBs of memory)
So in the very first attempt I wanted to copy back everything to my Transcend 790K. But after the first 500-1000 MBs(mix of archives, image, text and video files), the transaction speed has fallen down couple of times. I thought maybe the passive FTP connection was the problem, because after a few automatic reconnect attempts, the speed of the copy has been normalized again and in the end the device was connected. Later I found that the USB devices was reseted.
I had another try with a Sandisk Ultra Fit drive (SDCZ-43), but the result and the configuration was pretty sam. ~50GB EXT4 partition without journal and without barrier.
I force upgraded the machine to the ar71xx target and Filezilla so far copied back 16GBs without any problem.
Target ATH79 seem to be has so many problems with the USB subsystem, please see my other bugreport for the WDR4300 as well: FS#2567 - [ATH79] USB speed degradation on WDR4300.

Let me know if I can help the bughunting any way,
thanks and regards!

15.12.20192676Base systemBug ReportVery LowLowUnexpected realpath behaviouropenwrt-19.07Unconfirmed Task Description

There is a problem with creating chrooted SFTP access using OpenSSH package. However, it seems that the problem isn’t with the package, rather with realpath function of OpenWRT. The whole description of the problem was already provided in forum, here I only copy the part of the log file:

Nov 29 10:06:27 OpenWrt internal-sftp[12557]: realpath "."
Nov 29 10:06:27 OpenWrt internal-sftp[12557]: debug3: request 46352: sent status 2
Nov 29 10:06:27 OpenWrt internal-sftp[12557]: sent status No such file

Tested on both 18.06.5 and 19.07.0-rc1 with the same result.

18.12.20192685Base systemBug ReportVery LowLowColdplug too soon; hotplug.d scripts not run for some e...openwrt-19.07Unconfirmed Task Description

OpenWrt 19.07.0-rc2, latest openwrt-packages.

Occurs on at least ath79 but looking at the code this is not device-specific.

1. Have USB devices for which you have hotplug scripts (e.g. from p910d and sane-backends)
2. Boot (or reboot) with usb devices already plugged in.
3. Observe that the actions in the hotplug script (e.g. setting permissions / group ownership that don’t belong in the base system (i.e. hotplug.json)) as it’d be bloat to detect product:vendor ip pairs and take appropriate action for all the various packages and devices hotplug handles – if hotplug.json could have hotplug.json.d or somesuch it would alleviate most of this pain.

Looking at the procd code coldplug (udevtrigger) is called during ‘early’ init, which means that hotplug.d scripts are not yet present. Because /etc/init.d/boot (or any other initscript) no longer does a later call to udevtrigger, the events get missed).

If udevtrigger were called during regular init this wouldn’t be an issue (but probably the coldplug is needed earlier *as well* for devices needed to boot the system.

See also #1903 and #996 (they are likely the same root cause).

18.12.20192687Base systemBug ReportVery LowVery LowWiFi LED does not dynamically track state of radio on Z...openwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Occurs on ZBT-WE3526 (16M) an MT76 unit with 512MB Ram

Stock 19.07, but has been this way since 18.06.xx

Steps to reproduce:
Log into to LuCi and disable a wifi radio, LED remains on.

reboot, radiox LED is now off, so LED is only set at boot

Log back into luci, turn radio on, radio becomes operational (STAs can connect) but LED remains off.

Desired behavior: LED tracks state of radio without requiring a reboot.

25.12.20192694Base systemBug ReportVery LowMediumClearfog Pro: Default LAN / WAN Interface assignment is...openwrt-19.07Unconfirmed Task Description

On my Clearfog Pro Rev 2.0 the interfaces map as follows:

eth0: switch
eth1: SFP
eth2: standalone ethernet

This does not match the current description in /etc/board.d/02_network:

# eth0 is standalone ethernet
# eth1 is switch (-pro) or standalone ethernet (-base)
# eth2 is SFP
ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2"

While I don’t agree with the lan/wan decision made here, at least the comment should match reality.
So I suggest changing it to:

# eth2 is standalone ethernet
# eth0 is switch (-pro) or standalone ethernet (-base)
# eth1 is SFP
ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2"

Please also see the attached patch file, which also changes the switch configuration accordingly.

28.12.20192702KernelBug ReportVery LowMediumPerformance degradation after kernel.warn ath10k_core@8...openwrt-19.07Unconfirmed Task Description

Supply the following if possible:

- Device problem occurs on
Archer C7v2

- Software versions of OpenWrt/LEDE release, packages, etc.
OpenWrt 19.07-rc.2

[---] PACKAGES INSTALLED
echo [INFO] Downloading package information ...
opkg update
#
echo [INFO] Removing packages ...
opkg remove wpad-basic
#
echo [INFO] Installing packages ...
opkg install bash
opkg install block-mount
opkg install curl
opkg install e2fsprogs
opkg install htop
# opkg install igmpproxy
opkg install kmod-br-netfilter
opkg install kmod-fs-ext4
opkg install kmod-fs-msdos
opkg install kmod-fs-ntfs
opkg install kmod-scsi-core
opkg install kmod-usb-storage
opkg install libncurses
opkg install libpcre
opkg install lua luafilesystem
opkg install luci-mod-rpc
opkg install luci-proto-relay
opkg install mailsend
opkg install nano
opkg install relayd
opkg install rpcd
opkg install terminfo
opkg install tcpdump
opkg install uhttpd-mod-ubus
opkg install vsftpd
opkg install wget
opkg install wpad
#
# batman-adv
opkg install kmod-batman-adv
opkg install batctl-full
[---]

- Steps to reproduce
Today worked on batman-adv via ad-hoc between two devices. Device A has LAN to bat0, batman-adv works over ad-hoc wifi, Device B has bat0 to LAN. (Device B has only one wired client behind)
Both devices (Archer C7v2 with OpenWrt 19.07-rc.2) had multiple crashes of the below printed type resulting in only 10 MBit/s download speed on the computer attached via LAN to Device B. Before the kernel.warn log line appeared on one of the APs, the speed was full 100 MBit/s. As soon I reboot the “kernel.warn”ing AP, the speed is 100 MBit again. bat0 is bridged to eth0.101 on both ends.

 
Sat Dec 28 14:50:04 2019 daemon.notice hostapd: wlan0-1: AP-ENABLED
Sat Dec 28 14:50:05 2019 kern.info kernel: [ 2416.392454] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Dec 28 14:50:05 2019 daemon.notice wpa_supplicant[16106]: Successfully initialized wpa_supplicant
Sat Dec 28 14:50:06 2019 kern.info kernel: [ 2417.755684] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Dec 28 14:50:06 2019 daemon.notice wpa_supplicant[16106]: Note: nl80211 driver interface is not designed to be used with ap_scan=2; this can result in connection failures
Sat Dec 28 14:50:06 2019 daemon.notice wpa_supplicant[16176]: wlan0: Trying to associate with SSID 'Permakultur'
Sat Dec 28 14:50:06 2019 kern.info kernel: [ 2417.950938] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2417.991646] ------------[ cut here ]------------
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2417.996394] WARNING: CPU: 0 PID: 16176 at /builder/shared-workdir/build/build_dir/target-mips_24kc_musl/linux-ath79_generic/ath10k-ct-2019-09-09-5e8cd86f/ath10k-4.19/mac.c:6598 0x8700bd24 [ath10k_core@87000000+0x5d210]
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.016231] Modules linked in: ath9k ath9k_common pppoe ppp_async batman_adv ath9k_hw ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack libcrc32c iptable_mangle iptable_filter ip_tables crc_ccitt compat br_netfilter ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 msdos vfat fat ntfs nls_utf8 nls_iso8859_1 nls_cp437
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.088204]  usb_storage sd_mod scsi_mod ext4 mbcache jbd2 crc16 crc32c_generic crypto_hash ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.103218] CPU: 0 PID: 16176 Comm: wpa_supplicant Tainted: G        W       4.14.156 #0
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.111503] Stack : 000000f8 800b2a94 80500000 804af544 00000000 00000000 00000000 00000000
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.120128]         00000000 00000000 00000000 00000000 00000000 00000001 853c59d8 ebe9a33e
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.128783]         853c5a70 00000000 00000000 00009378 00000038 80447958 00000008 00000000
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.137442]         000001c9 6e8dd5be 000001c8 00000000 853c59b8 80000000 00000000 8704e480
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.146036]         8700bd24 000019c6 86310d28 87428800 00000003 8027f944 00000000 80630000
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.154570]         ...
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.157183] Call Trace:
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.157198] [<800b2a94>] 0x800b2a94
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.163293] [<80500000>] 0x80500000
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.166873] [<80447958>] 0x80447958
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.170485] [<8700bd24>] 0x8700bd24 [ath10k_core@87000000+0x5d210]
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.176813] [<8027f944>] 0x8027f944
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.180352] [<8006a56c>] 0x8006a56c
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.184017] [<8006a574>] 0x8006a574
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.187559] [<80084c20>] 0x80084c20
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.191102] [<8700bd24>] 0x8700bd24 [ath10k_core@87000000+0x5d210]
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.197583] [<80084d08>] 0x80084d08
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.201136] [<80318194>] 0x80318194
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.204714] [<8700bd24>] 0x8700bd24 [ath10k_core@87000000+0x5d210]
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.211078] [<87795f70>] 0x87795f70 [mac80211@87780000+0x6c280]
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.217204] [<8772d0d0>] 0x8772d0d0 [cfg80211@87700000+0x363f0]
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.223313] [<8772941c>] 0x8772941c [cfg80211@87700000+0x363f0]
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.229530] [<8771ddc0>] 0x8771ddc0 [cfg80211@87700000+0x363f0]
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.235711] [<80134f00>] 0x80134f00
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.239316] [<80350498>] 0x80350498
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.243000] [<803501ac>] 0x803501ac
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.246630] [<8034eb44>] 0x8034eb44
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.250375] [<8034f410>] 0x8034f410
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.253980] [<8034c9bc>] 0x8034c9bc
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.257540] [<8034e208>] 0x8034e208
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.261197] [<8034e6e4>] 0x8034e6e4
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.264845] [<802f7c1c>] 0x802f7c1c
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.268386] [<8034bcf8>] 0x8034bcf8
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.271988] [<8034e308>] 0x8034e308
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.275625] [<802f7e7c>] 0x802f7e7c
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.279170] [<800ac680>] 0x800ac680
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.282723] [<802f5f34>] 0x802f5f34
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.286301] [<802f6718>] 0x802f6718
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.289840] [<8034bdec>] 0x8034bdec
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.293390] [<802f681c>] 0x802f681c
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.297024] [<8013fd78>] 0x8013fd78
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.300656] [<802fd5c0>] 0x802fd5c0
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.304252] [<802f8704>] 0x802f8704
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.307808] [<802f6718>] 0x802f6718
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.311405] [<8006f72c>] 0x8006f72c
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.314981] [<802f84a4>] 0x802f84a4
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.318624]
Sat Dec 28 14:50:06 2019 kern.warn kernel: [ 2418.320140] ---[ end trace b03503722668fd71 ]---
Sat Dec 28 14:50:07 2019 kern.info kernel: [ 2418.329016] wlan0: Selected IBSS BSSID [MAC] based on configured SSID
Sat Dec 28 14:50:07 2019 daemon.notice netifd: Network device 'wlan0-1' link is up
Sat Dec 28 14:50:07 2019 daemon.notice netifd: Network device 'wlan0-2' link is up
Sat Dec 28 14:50:07 2019 daemon.notice netifd: Network device 'wlan0-3' link is up
Sat Dec 28 14:50:07 2019 daemon.notice netifd: Network device 'wlan0' link is up
Sat Dec 28 14:50:07 2019 daemon.notice netifd: Interface 'nwi_mesh0' is enabled
Sat Dec 28 14:50:07 2019 daemon.notice netifd: Interface 'nwi_mesh0' has link connectivity
Sat Dec 28 14:50:07 2019 daemon.notice netifd: Interface 'nwi_mesh0' is setting up now
Sat Dec 28 14:50:07 2019 kern.info kernel: [ 2418.899578] batman_adv: bat0: Adding interface: wlan0
Sat Dec 28 14:50:07 2019 kern.info kernel: [ 2418.904876] batman_adv: bat0: Interface activated: wlan0
Sat Dec 28 14:50:07 2019 daemon.notice netifd: Interface 'nwi_mesh0' is now up
Sat Dec 28 14:50:08 2019 daemon.notice wpa_supplicant[16176]: wlan0: Associated with [MAC]


29.12.20192709Base systemBug ReportVery LowMediumUnable to connect wifi on mvebu platform with esp8266openwrt-19.07Unconfirmed Task Description

- Device problem occurs on mvebu platform - Linksys wrt3200acm Marvell 88W8964 802.11bgn wifi while trying to connect by esp8266
- Software versions OpenWrt 19.07

esp8266 is not getting dhcp address and even when trying to communicate with static IP it is not possible to acquire connection. esp8266 is unable to get access to the router. Same problem exists in openwrt 18.06

 


09.01.20202719Base systemBug ReportVery LowHighBuffalo WBMR-HP-G300H: DSL does not connect at all with...openwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: Buffalo WBMR-HP-G300H
- Software versions of OpenWrt/LEDE release, packages, etc.: OpenWRT 19.07, kmod-ltq-adsl-ar9-fw-a 0.1-1, which shows up as 4.4.4.0.0.1 in dsl_control status.
- Steps to reproduce:

1. Get an ADSL line from Rostelecom.
2. Upgrade the router to OpenWRT 19.07.
3. Reboot.

Result: DSL does not connect. In /etc/init.d/dsl_control status, it goes through all phases, then briefly shows as “Up”, but then the “dsl0” interface is not created, and the following lines are logged in dmesg:

 [   56.597766] [DSL_BSP_Showtime 914]: Datarate US intl = 1024000, fast = 0
 [   56.603091] [DSL_BSP_Showtime 934]: no hookup from ATM driver to set cell rate

The error does not exist with the 4.5.4.9.1.1 firmware obtained from unofficial sources. The bug has been submitted through the affected ADSL line with the unofficial firmware.

Status:

# /etc/init.d/dsl_control status
ATU-C Vendor ID: Broadcom 161.149
ATU-C System Vendor ID: 00,00,00,00,00,00,00,00
Chipset: Ifx-AR9
Firmware Version: 4.5.4.9.1.1
API Version: 3.24.4.4
XTSE Capabilities: 0×4, 0×0, 0×0, 0×0, 0×0, 0×0, 0×0, 0×0 Annex: A
Line Mode: G.992.1 (ADSL)
Profile:
Line State: UP [0×801: showtime_tc_sync]
Forward Error Correction Seconds (FECS): Near: 413342 / Far: 0
Errored seconds (ES): Near: 0 / Far: 0
Severely Errored Seconds (SES): Near: 0 / Far: 0
Loss of Signal Seconds (LOSS): Near: 0 / Far: 0
Unavailable Seconds (UAS): Near: 253 / Far: 253
Header Error Code Errors (HEC): Near: 0 / Far: 0
Non Pre-emtive CRC errors (CRC_P): Near: / Far:
Pre-emtive CRC errors (CRCP_P): Near: / Far:
Power Management Mode: L0 - Synchronized
Latency [Interleave Delay]: 8.0 ms [Interleave] 8.0 ms [Interleave]
Data Rate: Down: 9.952 Mb/s / Up: 1.024 Mb/s
Line Attenuation (LATN): Down: 32.2 dB / Up: 19.5 dB
Signal Attenuation (SATN): Down: 32.6 dB / Up: 19.5 dB
Noise Margin (SNR): Down: 6.1 dB / Up: 13.0 dB
Aggregate Transmit Power (ACTATP): Down: 20.0 dB / Up: 12.3 dB
Max. Attainable Data Rate (ATTNDR): Down: 8.848 Mb/s / Up: 1.204 Mb/s
Line Uptime Seconds: 1164
Line Uptime: 19m 24s

(yes, very bad line)

Config:

config atm-bridge ‘atm’

option vpi '1'
option encaps 'llc'
option payload 'bridged'
option nameprefix 'dsl'
option vci '50'
option unit '0'
option atmdev '0'

config dsl ‘dsl’

option annex 'a'
option firmware '/lib/firmware/dsl_ar9_firmware_adsl_a-04.05.04.09.01.01.bin'

config interface ‘wan’

option ifname 'dsl0'
option proto 'pppoe'
option ipv6 '1'
option username 'censored'
list dns '8.8.8.8'
list dns '8.8.4.4'
option peerdns '0'
option keepalive '60 5'
option password 'censored'
14.01.20202734Base systemBug ReportVery LowMediumOpkg update fails although router has enough memoryopenwrt-19.07Unconfirmed Task Description

19.07.0 running on WNDR3700v2, 32MB of memory. The machine is certainly not short on memory:

                total        used        free      shared  buff/cache   available
  Mem:          59560       26912       24108         956        8540       16564
  Swap:             0           0           0

Running “opkg update” a first time works fine. However, if I run “opkg update” a second time, it reports:

  Collected errors:
   * pkg_hash_add_from_file: Failed to open /var/opkg-lists/openwrt_routing: Out of memory.

After doing “rm /var/opkg-lists/openwrt_*”, everything works fine again.

18.01.20202750Base systemBug ReportVery LowMediumWireless on Netgear WNDR3700v2 not workingopenwrt-19.07Unconfirmed Task Description

After upgrading my Netgear WNDR3700 v2 to 19.07 (ath79 target), the WiFi cards aren’t detected.

Here are the outputs of dmesg, logread, lsmod | grep ath, ls /sys/bus/pci/*, lspci -vnn; at the recommendation of PaulFertser in #openwrt, I tried echo -n 168c ff1d > /sys/bus/pci/drivers/ath9k/new_id, which resulted in some error messages in dmesg, but the WiFi interfaces still aren’t detected (wifi config produces an empty file).

With ar71xx target, wifi works; the cards seem to have a different http://p.0au.de/3393221e/, too. dmesg, logread, ls /sys/bus/pci/*.

21.01.20202759PackagesBug ReportVery LowMediumodhcpd IPv6 NDP + macOS don't play togetheropenwrt-19.07Unconfirmed Task Description

My device: TP-Link Archer C7 v2.0 (JP)
My software stack: OpenWrt 19.07

My router uses odhcpd’s relay mode to relay IPv6 neighbor discovery protocol and router advertisements from the uplink router.

My linux-based system connected to the router is able to get IPv6 connectivity through the router without problems.

However, my macOS-based system doesn’t get IPv6 connectivity. It gets a global IPv6 prefix, which suggests that it’s able to receive RA packets, but my router is also unable to ping6 the macOS system by it’s globally unique address, and doing ip -6 neigh on the router makes it clear that the router doesn’t know the MAC address of the macOS system, and all of it’s probes to find it, end up failing.

Inspecting the ICMPv6 traffic in the LAN shows that my macOS system doesn’t respond to the neighbor solicitation packets send by the router. Here’s an example of such a packet:

02:28:50.006540 IP6 (hlim 255, next-header ICMPv6 (58) payload length: 32) fd26:e9f1:e833::1 > ff02::1:ff65:88f8: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2404:7a80:9621:7100:404:978a:5765:88f8

  source link-address option (1), length 8 (1): 18:a6:f7:8d:c0:d3

Here, fd26:e9f1:e833::1 is the ULA of the LAN interface of the router.

According to Apple discussion board ( https://discussions.apple.com/thread/8620806 ) macOS seems to have a behaviour such that it ignores neighbor solicitation packets unless the source address of the packet is a link-local address.

Indeed, commenting out option ula_prefix in /etc/config/network makes odhcpd to use link-local addresses, and that makes macOS to respond to neighbor solicitation queries, and in my system, demonstrably restores IPv6 connectivity.

Since macOS is a very common operating system, it would be benefical if odhcpd’s default behaviour were to use LLA in NDP packets. The current situation of not being able to set ULA prefix without losing connectivity is unfortunate. (And I think that ULA prefix is set by default in OpenWRT, which makes macOS not play together with it by default.)

For reference, here’s a forum thread I documented my forays into inspecting this problem: https://forum.openwrt.org/t/how-to-send-icmp6-neighbor-solicitation-with-a-link-local-source-address/53220

Could the default source address of odhcpd’s NDP/RA packets be changed to LLA?

24.01.20202769Base systemBug ReportVery LowLowct-htt firmware is missing from ipq40xx target in 19.07openwrt-19.07Unconfirmed Task Description

19.07-SNAPSHOT

I am trying to put together an image for gl-b1300 (ipq40xx) using the image builder and it is failing with the error below. I looked at the base packages for 19.07 and the htt variants are missing for all ath10k-firrmware-qca supported targets. I also checked ipq806x for 19.07 and the htt firmware is present there.
Looking at master: the ipq40xx target does include htt packages.

Are the htt firmware files excluded from ipq40xx in 19.07 for a reason?

Collected errors:
* opkg_install_cmd: Cannot install package ath10k-firmware-qca4019-ct-htt.
Makefile:153: recipe for target ‘package_install’ failed
make[2]: * [package_install] Error 255
Makefile:112: recipe for target ‘_call_image’ failed
make[1]:
* [_call_image] Error 2
Makefile:196: recipe for target ‘image’ failed
make: *** [image] Error 2

24.01.20202774ToolchainBug ReportVery LowMediumimagebuilder breaks in long pwdopenwrt-19.07Unconfirmed Task Description

I have a directory where I keep imagebuilder. I can sucessfully build custom images there for d-link/dir-825, xiaomi/mini, tp-link/wr842nd_v1 and linksys/wrt1900ac. But trying to create default image for ar71xx/mikrotik gives error:

...
Successfully writed 13 blocks and 1757184 bytes
Each block contain 64 chanks + 0 bytes tail hole.
Each chunk(2112 bytes) consists: data part(2048 bytes) + oob part(64 bytes).
mv: cannot stat '/mydir/openwrt/imagebuilder/openwrt-imagebuilder-19.07.0-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/tmp/openwrt-19.07.0-ar71xx-mikrotik-nand-large-squashfs-sysupgrade.bin.new': No such file or directory
make[3]: *** [Makefile:71: /mydir/openwrt/imagebuilder/openwrt-imagebuilder-19.07.0-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/tmp/openwrt-19.07.0-ar71xx-mikrotik-nand-large-squashfs-sysupgrade.bin] Error 1
make[2]: *** [Makefile:169: build_image] Error 2
make[1]: *** [Makefile:120: _call_image] Error 2
make: *** [Makefile:197: image] Error 2

It can be reproduced:

% mkdir /tmp/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
% cd /tmp/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
% wget https://downloads.openwrt.org/releases/19.07.0/targets/ar71xx/mikrotik/openwrt-imagebuilder-19.07.0-ar71xx-mikrotik.Linux-x86_64.tar.xz
% tar xf openwrt-imagebuilder-19.07.0-ar71xx-mikrotik.Linux-x86_64.tar.xz
% cd openwrt-imagebuilder-19.07.0-ar71xx-mikrotik.Linux-x86_64
% make image PROFILE=nand-large
...
1671656 bytes (1.7 MB, 1.6 MiB) copied, 0.00693055 s, 241 MB/s
Can't get lstat from kernel file!: No such file or directory
make[3]: *** [Makefile:71: /tmp/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/openwrt-imagebuilder-19.07.0-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/tmp/openwrt-19.07.0-ar71xx-mikrotik-nand-large-squashfs-sysupgrade.bin] Error 255
make[2]: *** [Makefile:169: build_image] Error 2
make[1]: *** [Makefile:120: _call_image] Error 2
make: *** [Makefile:197: image] Error 2
zsh: exit 2     make image PROFILE=nand-large
30.01.20202783Base systemBug ReportVery LowHighTP-Link Archer A7 v5 can't be flashet via tftpopenwrt-19.07Unconfirmed Task Description

Device: TP-Link Archer A7 (RU) Ver 5.0
Software: OpenWRT 19.07.0

I just bought this router. And I trying to flash it with openwrt-19.07.0-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin trough tftp.
In wireshark I clearly see that file was downloaded. But router didn’t flashed.
I tried to flash snapshot image wtih same result.
I checked sha256 sums and it matches.

When I reproduced same steps with original TP-Link update image it worked well. Seems like something prevents router from flashing OpenWRT image.

30.01.20202785Base systemBug ReportVery LowHighkernel loading during netboot fails on mikrotik devicesopenwrt-19.07Unconfirmed Task Description

Devices tested:

  • Mikrotik rb433
  • Mikrotik rb435g

Software version: Using the v19.07.1 tag.

Issue: There are a few packages, whose are leading the ramdisk “unbbotable”, more precise the device is not able to load the kernel. First this happened by kmod-scsi-core , I thought it must be some kernel-related issue. Afterthat I realised that either I enable the aforementioned kernel-module, or the libraries called libpcre and libpci, the boot procedure will stop at:

Gateway: 192.168.1.254
transfer started ................................... transfer ok, time=2.61s
setting up elf image... OK
jumping to kernel code OpenWrt kernel loader for AR7XXX/AR9XXX
Copyright (C) 2011 Gabor Juhos juhosg@openwrt.org Decompressing kernel... done!
Starting kernel at 80060000...

Compiling these packages only as a module results a nice bootable image. Firstly I thought that maybe my ramdisk is too large, but it is about only 4,5 MB - previously using older trunk I was able to boot up images over 5 MByte.
I have pasted the config file to the ticket. If you switch libpcre and libpci to M instead of * it will boot.

This issue was not there before, using the image built from 18.06.

31.01.20202791Base systemBug ReportVery LowHighIPv6 router advertisments lost after upgrade to 19.07openwrt-19.07Unconfirmed Task Description

I’ve just upgraded my linksys wrt-1200ac from 18.06.4 to 19.07.0

I’ve got a more-or-less out-of-the-box configuration with wired and wireless clients all connected to the ‘br-lan’ bridge. My ISP provides native IPv6. I’ve got odhcpd-ip6only installed, and a mixture of clients, some using SLAAC and some using DHCPv6.

When a wireless client that is configured for SLAAC (e.g. an android phone) connects, it sends an IPv6 router solicitation to ff02::1 and receives a router advertisement on its fe80::<something> address. That still works fine. But the client never receives any further router adverts, so the route times out after 1800 seconds and IPv6 connectivity is lost.

This is *only* going wrong with wireless clients: tcpdump on a wired client shows router adverts arriving on ff02::1 every few minutes. But tcpdump on a wireless client shows no router adverts after the initial one.

I’ve retested with 18.06.4 and the problem does not exist in that version.

31.01.20202792Base systemBug ReportVery LowLowlantiq DSL statuistics and diagnostics do not report G....openwrt-19.07Unconfirmed Task Description

OpenWrt 19.07.1 on BT HomeHub5A (lantiq vrx200) the dsl stats report tool (ltq-vdsl-app_4.17.18.6-2_mips_24kc.ipk) and the matching kerel module (kmod-ltq-vdsl-vr9-mei_4.14.167+1.5.17.6-4_mips_24kc.ipk) do not report ITU G.998.4 Retransmission counts (on lines using G.INP retransmissions. It turns out that adding:
CONFIGURE_ARGS += \

  1. -enable-dsl-pm-retx-counters \
  2. -enable-dsl-pm-retx-thresholds

to openwrt/package/kernel/lantiq/ltq-vdsl/Makefile and openwrt/package/network/config/ltq-vdsl-app/Makefile and rebuilding yields a working ReTx counter report:

root@BTHH5A:~# . /lib/functions/lantiq_dsl.sh ; dsl_cmd rtsg 0
nReturn=0 nDirection=0 nRxCorruptedTotal=0 nRxUncorrectedProtected=0 nRxRetransmitted=0 nRxCorrected=0 nTxRetransmitted=3
root@ BTHH5A:~# . /lib/functions/lantiq_dsl.sh ; dsl_cmd rtsg 1
nReturn=0 nDirection=1 nRxCorruptedTotal=7114893 nRxUncorrectedProtected=6171968 nRxRetransmitted=0 nRxCorrected=942925 nTxRetransmitted=9228892

At least in Germany the incumbent uses G.998.4 Retransmission, not only do deal with impulse noise, but also as a diagnostic counters for its Dynamik Link/Spektrum Management tool that based on these and other counters will limit the maximum perissable Sync for each line to optimize lik stability. It would be really great if stock OpenWrt builds would alow to report these values and I would like to propose to change the makefiles as shown above.

01.02.20202794Base systemBug ReportVery LowLowCannot Override MAC add of wireless interfaceopenwrt-19.07Unconfirmed Task Description

- Device problem — Can’t change wireless MAC add
- Software versions of OpenWrt/LEDE release,— openwrt-19.07.0-ar71xx-generic-cpe210-220-v1-

                                                squashfs-sysupgrade
 

hi..good day... i have tp-link CPE 220 v1 i used openwrt firmware openwrt-18.06.6-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade no problem. i can change the Wi-Fi BSSID or Override MAC address...

when i upgrade the firmware to openwrt-19.07.0-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade i can’t Override the MAC address...

pls help...

openwrt-18.06.0 TO openwrt-18.06.6 can Override the MAC address all interface

openwrt-19.07.0 cannot Override the MAC address of Wireless, (Wireless only)

01.02.20202795Base systemBug ReportVery LowLow19.07.x , TP-Link TL-WR841N v9, kernell panic openwrt-19.07Unconfirmed Task Description

Used TP-Link TL-WR841N/D v9 with mod 8M
tested with build for 8M firmware.

updated via:
scp copy to /tmp
mtd -r write /tmp/firmwaew.bin firmware

18.06 work ok on this hardware, report:https://lexxai.blogspot.com/2019/07/hardware-modding-tp-link-tl-wr841n-v9.html.

***************************************
*     U-Boot 1.1.4-7a540a78-clean     *
*          Build: 2018-02-23          *
***************************************

** Warning: bad env CRC, using default,
   use 'saveenv' to save it in FLASH

  BOARD: TP-Link TL-WR841N/D v9
    SOC: QCA953x ver. 1 rev. 1
    CPU: MIPS 24Kc
    RAM: 32 MB DDR1 16-bit CL3-3-3-8
  FLASH: 8 MB Winbond W25Q64
    MAC: E8:DE:27:CD:0C:C4
 CLOCKS: CPU/RAM/AHB/SPI/REF
         550/400/200/ 25/ 25 MHz

Hit any key to stop booting:  0

Booting image from 0x9F020000...

   Vendor/image name:    OpenWrt r10911-c155900f66
   Hardware ID:          0x8410009
   Whole image size:     0 kB (0 bytes)
   Kernel size:          3.4 MB (3579760 bytes)
   Rootfs size:          0 kB (0 bytes)
   Kernel load address:  0x80060000
   Kernel entry point:   0x80060000

   Header CRC...  skipped
   Data CRC...    skipped

Stopping network... OK!
Uncompressing Kernel... OK!
Starting kernel...

[    0.000000] Linux version 4.14.167 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10911-c155900f66)) #0 Wed Jan 29 16:05:35 2020
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] MIPS: machine is TP-Link TL-WR841N/ND v9
[    0.000000] SoC: Qualcomm Atheros QCA9533 ver 1 rev 1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] random: get_random_bytes called from 0x804776ec with crng_init=0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 19648K/32768K available (3544K kernel code, 144K rwdata, 492K rodata, 7972K init, 203K bss, 13120K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] CPU clock: 550.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6950037990 ns
[    0.000011] sched_clock: 32 bits at 275MHz, resolution 3ns, wraps every 7809031678ns
[    0.008899] Calibrating delay loop... 366.18 BogoMIPS (lpj=1830912)
[    0.075976] pid_max: default: 32768 minimum: 301
[    0.081456] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.088993] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102006] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113239] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.120271] pinctrl core: initialized pinctrl subsystem
[    0.129130] NET: Registered protocol family 16
[    0.159871] clocksource: Switched to clocksource MIPS
[    0.166986] NET: Registered protocol family 2
[    0.173070] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.181077] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.188304] TCP: Hash tables configured (established 1024 bind 1024)
[    0.195734] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.202443] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.209932] NET: Registered protocol family 1
[    0.441778] Crashlog allocated RAM at address 0x1f00000
[    0.449761] workingset: timestamp_bits=30 max_order=13 bucket_order=0
[    0.463652] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.470338] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.573035] io scheduler noop registered
[    0.577495] io scheduler deadline registered (default)
[    0.586478] pinctrl-single 1804002c.pinmux: 576 pins at pa b804002c size 72
[    0.595622] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.605887] console [ttyS0] disabled
[    0.610067] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
[    0.619896] console [ttyS0] enabled
[    0.619896] console [ttyS0] enabled
[    0.627446] bootconsole [early0] disabled
[    0.627446] bootconsole [early0] disabled
[    0.655906] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[    0.660968] 3 fixed-partitions partitions found on MTD device spi0.0
[    0.667534] Creating 3 MTD partitions on "spi0.0":
[    0.672514] 0x000000000000-0x000000020000 : "u-boot"
[    0.678707] 0x000000020000-0x0000003f0000 : "firmware"
[    0.685921] 2 tplink-fw partitions found on MTD device firmware
[    0.692126] Creating 2 MTD partitions on "firmware":
[    0.697268] 0x000000000000-0x00000036a170 : "kernel"
[    0.703347] 0x000000370000-0x0000003d0000 : "rootfs"
[    0.709470] mtd: device 3 (rootfs) set to be root filesystem
[    0.715429] mtdsplit: no squashfs found in "rootfs"
[    0.720527] 0x0000003f0000-0x000000400000 : "art"
[    0.727132] libphy: Fixed MDIO Bus: probed
[    1.071005] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
[    1.750303] libphy: ag71xx_mdio: probed
[    1.755849] libphy: ar8xxx-mdio: probed
[    1.821951] switch0: Atheros AR8229 rev. 1 switch registered on mdio-bus.0
[    1.908098] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[    1.918258] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
[    1.927890] NET: Registered protocol family 10
[    1.939093] Segment Routing with IPv6
[    1.943086] NET: Registered protocol family 17
[    1.947742] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.961897] 8021q: 802.1Q VLAN Support v1.8
[    2.302222] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:1f:04 [uid=004dd042, driver=Generic PHY]
[    2.313243] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
[    2.370657] Freeing unused kernel memory: 7972K
[    2.375356] This architecture does not have kernel memory protection.
[    2.403375] init: Console is alive
[    2.407211] init: - watchdog -
[    2.437672] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.448667] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.466809] init: - preinit -
[    2.509932] random: fast init done
[    2.808648] random: jshn: uninitialized urandom read (4 bytes read)
[    2.917601] random: jshn: uninitialized urandom read (4 bytes read)
[    3.163179] random: jshn: uninitialized urandom read (4 bytes read)
[    3.805753] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.811977] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    4.821087] eth0: link up (1000Mbps/Full duplex)
[    4.825913] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    4.833060] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[    7.014588] eth0: link down
[    7.042239] procd: - early -
[    7.045358] procd: - watchdog -
[    7.636953] procd: - watchdog -
[    7.640695] procd: - ubus -
[    7.652470] urandom_read: 5 callbacks suppressed
[    7.652481] random: ubusd: uninitialized urandom read (4 bytes read)
[    7.694505] random: ubusd: uninitialized urandom read (4 bytes read)
[    7.702822] procd: - init -
Please press Enter to activate this console.
[    8.251779] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.275535] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.306112] Loading modules backported from Linux version v4.19.98-0-gd183c8e2647a
[    8.314024] Backport generated by backports.git v4.19.98-1-0-g8204eb99
[    8.342826] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.369084] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[    8.509039] xt_time: kernel timezone is -0000
[    8.643102] PPP generic driver version 2.4.2
[    8.661009] NET: Registered protocol family 24
[    8.746124] Data bus error, epc == 801f4180, ra == 8129febc
[    8.751898] Oops[#1]:
[    8.754255] CPU: 0 PID: 497 Comm: kmodloader Not tainted 4.14.167 #0
[    8.760819] task: 81878000 task.stack: 811f8000
[    8.765491] $ 0   : 00000000 00000001 deadc0de 00014000
[    8.770901] $ 4   : b81143fc 000143fc 00014000 00000004
[    8.776305] $ 8   : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c
[    8.781707] $12   : 7c7c3c7c 81236500 ffffff80 7c7c7c3c
[    8.787120] $16   : 8115c080 00000018 00000000 00030000
[    8.792522] $20   : 00010000 00031018 00000004 000003ff
[    8.797925] $24   : 00000000 00000000
[    8.803328] $28   : 811f8000 811f9a30 811f9a84 8129febc
[    8.808740] Hi    : 00000003
[    8.811715] Lo    : 000000ff
[    8.814696] epc   : 801f4180 0x801f4180
[    8.818663] ra    : 8129febc 0x8129febc [ath9k_hw@81280000+0x51660]
[    8.825129] Status: 1000f403 KERNEL EXL IE
[    8.829458] Cause : 1080001c (ExcCode 07)
[    8.833598] PrId  : 00019374 (MIPS 24Kc)
[    8.837644] Modules linked in: ath9k(+) ath9k_common pppoe ppp_async ath9k_hw ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 gpio_button_hotplug
[    8.901314] Process kmodloader (pid: 497, threadinfo=811f8000, task=81878000, tls=77fb3efc)
[    8.909933] Stack : ffffffff 81236500 ffffff80 ffffffff 00002710 8115c080 000003ff 812a0000
[    8.918580]         8111a800 8115c080 811f9b14 00000004 812ccda8 8115c4bc 00000001 8129ea64
[    8.927226]         811f8000 811f9a98 00000220 00000220 00008000 ffffffff 811f9b14 812a0ab0
[    8.935872]         8115a080 81283e88 00000001 80450000 812d9500 81201ff0 000186a0 8115c080
[    8.944519]         8115c080 8115c0a8 00008000 00000001 811f9b14 00000004 812ccda8 99999999
[    8.953165]         ...
[    8.955692] Call Trace:
[    8.955740] [<812a0000>] 0x812a0000 [ath9k_hw@81280000+0x51660]
[    8.964387] [<8129ea64>] 0x8129ea64 [ath9k_hw@81280000+0x51660]
[    8.970516] [<812a0ab0>] 0x812a0ab0 [ath9k_hw@81280000+0x51660]
[    8.976635] [<81283e88>] 0x81283e88 [ath9k_hw@81280000+0x51660]
[    8.982755] [<81201ff0>] 0x81201ff0 [ath9k@81200000+0x16bb0]
[    8.988619] [<812930f8>] 0x812930f8 [ath9k_hw@81280000+0x51660]
[    8.994739] [<80093348>] 0x80093348
[    8.998350] [<812864d0>] 0x812864d0 [ath9k_hw@81280000+0x51660]
[    9.004467] [<80250bd8>] 0x80250bd8
[    9.008081] [<80093348>] 0x80093348
[    9.011691] [<812026a4>] 0x812026a4 [ath9k@81200000+0x16bb0]
[    9.017543] [<800aefec>] 0x800aefec
[    9.021168] [<8120e468>] 0x8120e468 [ath9k@81200000+0x16bb0]
[    9.027023] [<80299160>] 0x80299160
[    9.030649] [<8024f43c>] 0x8024f43c
[    9.034250] [<8029367c>] 0x8029367c
[    9.037852] [<8024db98>] 0x8024db98
[    9.041454] [<8024fabc>] 0x8024fabc
[    9.045058] [<8024dce4>] 0x8024dce4
[    9.048656] [<8024bd38>] 0x8024bd38
[    9.052263] [<8024dc60>] 0x8024dc60
[    9.055870] [<8024bdf0>] 0x8024bdf0
[    9.059471] [<803bf270>] 0x803bf270
[    9.063074] [<8024bc3c>] 0x8024bc3c
[    9.066680] [<8024d124>] 0x8024d124
[    9.070291] [<8024e300>] 0x8024e300
[    9.073905] [<81217000>] 0x81217000 [ath9k@81200000+0x16bb0]
[    9.079748] [<8024e4a8>] 0x8024e4a8
[    9.083366] [<81217018>] 0x81217018 [ath9k@81200000+0x16bb0]
[    9.089214] [<80060a00>] 0x80060a00
[    9.092822] [<800e6a40>] 0x800e6a40
[    9.096423] [<800912d4>] 0x800912d4
[    9.100025] [<8010fbe0>] 0x8010fbe0
[    9.103642] [<800cbee4>] 0x800cbee4
[    9.107247] [<80111044>] 0x80111044
[    9.110854] [<800cb81c>] 0x800cb81c
[    9.114462] [<800c9680>] 0x800c9680
[    9.118071] [<80111a14>] 0x80111a14
[    9.121673] [<8011c4e0>] 0x8011c4e0
[    9.125275] [<800cbb3c>] 0x800cbb3c
[    9.128878] [<800cbc28>] 0x800cbc28
[    9.132487] [<8006ed8c>] 0x8006ed8c
[    9.136093] [<803d0c74>] 0x803d0c74
[    9.139698] [<800698a0>] 0x800698a0
[    9.143307]
[    9.144847] Code: 26310001  8c820000  0000000f <03e00008> 00000000  27bdffe8  afbf0014  0c0a76b2  00000000
[    9.154936]
[    9.156551] ---[ end trace eb9837c2a907321b ]---
[    9.163433] Kernel panic - not syncing: Fatal exception
[    9.169959] Rebooting in 1 seconds..


same crash and with public images:
https://downloads.openwrt.org/releases/19.07.0/targets/ath79/tiny/openwrt-19.07.0-ath79-tiny-tplink_tl-wr841-v9-initramfs-kernel.bin

03.02.20202803KernelBug ReportVery LowVery Lowmt76 kernel spam log with ingnoring tx power message openwrt-19.07Unconfirmed Task Description

ASUS RT-AC51U

Official build OpenWRT 19.07.1 without installed any add-ons packages.

System and kernel log all time are spammed by information about ignoring default 2.4G tx power even when in its set to default driver. This issue appears right after fresh installation and rebooting or changing wireless setting doesn’t fix it.

Showing tasks 1 - 50 of 1073 Page 1 of 221 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing