OpenWrt/LEDE Project

Welcome to the OpenWrt Project bug reporting and issue tracking system

Problems to be reported here are for the current OpenWrt and legacy LEDE Project’s targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to openwrt-bugs@infradead.org.

OpenedIDCategoryTask TypePriority  descSeveritySummaryReported InStatus
08.04.2017692Base systemBug ReportMediumMediumWLAN AP not working on RasPi (bcm2710 target)TrunkAssigned Task Description

When flashing the brcm2708 / bcm2710 target the WiFi interface gets stuck in “client mode” and the AP will not be able to be brought up.

Some screenshots and a load of discussion here:
https://forum.lede-project.org/t/ap-mode-radio0-in-raspi-3-always-acts-as-a-client-shows-as-wlan0-in-luci/2885

Two more days of tinkering, wifi-up’ing and -down’ing did not bring me further.
I flashed another Pi3 (to exclude a hardware defect) with the same result.

I tried latest snapshot and stable images.
I am happy to help debug – tell me what you need me to do.

Greetings,
–Thomas

14.10.2016227Base systemBug ReportMediumHighVLAN support mismatch between preinit and default netwo...TrunkResearching Task Description

PPPoE is broken on WRT1900ACS

Upgraded from Lede r578 to latest Lede r1814 and PPPOE doesn’t work anymore altough the pppd version and PPPoE version are the same:
- Linksys WRT1900ACS
- LEDE reboot r1814

pppd debug log:

Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Timeout waiting for PADO packets
Unable to complete PPPoE Discovery
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]

While on the same hardware running LEDE r578, the PPPoE module works as expected:

Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Recv PPPOE Discovery V1T1 PADO session 0×0 length 40
dst c2:56:27:ca:d7:d4 src a0:f3:e4:34:d8:21
[service-name] [AC-name acc-aln1.hac] [AC-cookie 75 58 37 a5 ba 3c e4 a5 2a 61 bb 23 92 5c 1b dc]
Send PPPOE Discovery V1T1 PADR session 0×0 length 24
dst a0:f3:e4:34:d8:21 src c2:56:27:ca:d7:d4
[service-name] [AC-cookie 75 58 37 a5 ba 3c e4 a5 2a 61 bb 23 92 5c 1b dc]
Recv PPPOE Discovery V1T1 PADS session 0x30b length 4
dst c2:56:27:ca:d7:d4 src a0:f3:e4:34:d8:21
[service-name]
PADS: Service-Name: ‘’ PPP session is 779
Connected to a0:f3:e4:34:d8:21 via interface eth0
using channel 2
Using interface pppoe-wan
Connect: pppoe-wan ←→ eth0
sent [LCP ConfReq id=0×1 <mru 1492> <magic 0xc6952556>]
rcvd [LCP ConfReq id=0×66 <mru 1492> <auth chap MD5> <magic 0x4cc73648>]
sent [LCP ConfAck id=0×66 <mru 1492> <auth chap MD5> <magic 0x4cc73648>]
rcvd [LCP ConfAck id=0×1 <mru 1492> <magic 0xc6952556>]
sent [LCP EchoReq id=0×0 magic=0xc6952556]
rcvd [CHAP Challenge id=0×1 <7131a44524d1de8f1cd1061cac6d8c071d8bfe7351bc4ea7bd08f56684428475f229ba177a192696ebab32>, name = “acc-aln1.hac”]
sent [CHAP Response id=0×1 <4bb1a418b298790b128ad4d7ef3109ad>, name = “bthomehub@btbroadband.com”]
rcvd [LCP EchoRep id=0×0 magic=0x4cc73648]
rcvd [CHAP Success id=0×1 “CHAP authentication success”]
CHAP authentication succeeded: CHAP authentication success
CHAP authentication succeeded
peer from calling number A0:F3:E4:34:D8:21 authorized
sent [IPCP ConfReq id=0×1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
sent [IPV6CP ConfReq id=0×1 <addr fe80::c595:37d1:3987:1929>]
rcvd [IPV6CP ConfReq id=0x7b <addr fe80::0221:05ff:feb4:8824>]
sent [IPV6CP ConfAck id=0x7b <addr fe80::0221:05ff:feb4:8824>]
rcvd [IPCP ConfReq id=0×38 <addr 172.16.12.12>]
sent [IPCP ConfAck id=0×38 <addr 172.16.12.12>]
rcvd [IPCP ConfNak id=0×1 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
sent [IPCP ConfReq id=0×2 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
rcvd [IPV6CP ConfAck id=0×1 <addr fe80::c595:37d1:3987:1929>]
local LL address fe80::c595:37d1:3987:1929
remote LL address fe80::0221:05ff:feb4:8824
Script /lib/netifd/ppp-up started (pid 2646)
rcvd [IPCP ConfAck id=0×2 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
local IP address 81.146.2.155
remote IP address 172.16.12.12
primary DNS address 81.139.57.100
secondary DNS address 81.139.56.100
ppp.log
secondary DNS address 81.139.56.100
Script /lib/netifd/ppp-up started (pid 2653)
Script /lib/netifd/ppp-up finished (pid 2646), status = 0×9 Script /lib/netifd/ppp-up finished (pid 2653), status = 0×9

18.11.20181958PackagesBug ReportMediumLowuqmi: unicode characters in SMS confuse uqmiTrunkNew Task Description

When using uqmi –get-message the message ends up truncated in case it contains unicode characters like german umlauts.

02.01.20213559Base systemBug ReportMediumLowuclient-fetch fails to download more than 2 filesAllNew Task Description

uclient-fetch has support for downloading several files:

uclient-fetch URL1 URL2 URL3 ...

However, this only works for the first two URLs. The third and above URLs simply cause uclient-fetch to re-download the second URL again.

In addition, only the first URL is checked for validity. If a subsequent URL is invalid, then the previous URL is re-used:

uclient-fetch http://example.com invalid

This example will download http://example.com twice.

10.03.20192176KernelBug ReportMediumHighubiquiti loco xw (AR9342 Rev.2) stops receiving on wire...AllNew Task Description

This bug has been existing as long as the ubiquiti loco xw 5 ghz hardware is around, probably what we are dealing with is a hardware bug in the AR9342 Rev. 2 chip. It is somehow hard to reproduce, but it hits us reliable every couple of hours, sometimes days, running any version of OpenWrt up to todays master branch. It just happened again and this time I decided to check if the bug is actually listed on FS – in addition to creating the usual cron-job executing `iw dev wlan0 scan` every minute. There is even a watchdog in the community libremesh repository designed to catch exactly this bug:
https://github.com/libremesh/lime-packages/blob/master/packages/cotonete/Makefile#L21

So to run into it, here we got 2 ubiquiti nanobeam m5 devices running OpenWrt ar71xx/generic loco-m-xw pointing at each other over a distance of roughly 2km. This link is acceptable, but not perfect and slightly asymmetric.

Device A (worse RX SNR):

Station f0:9f:c2:xx:xx:7a (on wlan0-mesh)
	inactive time:	0 ms
	rx bytes:	1433997029
	rx packets:	8589913
	tx bytes:	23160025785
	tx packets:	15667682
	tx retries:	677924
	tx failed:	0
	rx drop misc:	30076
	signal:  	-76 [-79, -79] dBm
	signal avg:	-74 [-77, -77] dBm
	Toffset:	4887897799 us
	tx bitrate:	43.3 MBit/s MCS 10 short GI
	rx bitrate:	43.3 MBit/s MCS 4 short GI
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18117 seconds

Device B (better RX SNR)

Station fc:ec:da:xx:xx:8c (on wlan0-mesh)
	inactive time:	20 ms
	rx bytes:	23442553203
	rx packets:	16047526
	tx bytes:	1274688573
	tx packets:	8251479
	tx retries:	1337700
	tx failed:	2932
	rx drop misc:	45195
	signal:  	-72 [-79, -73] dBm
	signal avg:	-71 [-78, -73] dBm
	Toffset:	18446744068821653812 us
	tx bitrate:	57.8 MBit/s MCS 11 short GI
	rx bitrate:	43.3 MBit/s MCS 10 short GI
	last ack signal:24 dBm
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18179 seconds

Now it so happens that device A (and always only device A!) becomes deaf after some hours of mostly sending lots of traffic to device B. It will continue to send beacons, but loose all associations. device B will keep trying setting up a link, but it keeps ending up in ‘BLOCKED’ state and dumps using a monitor mode interface show that device A simply doesn’t react at all to any of the frames send by device B. A simple `iw dev wlan0 scan` on device A (which doesn’t give any results) fixes the problem.

The channel seems rather unused otherwise and signal quality only varies by weather conditions. Interestingly this seems to happen on non-DFS channels only. And it happens on Ad-Hoc mode (unencrypted, never tried encrypted) and 802.11s (open ie. setup via `iw` tool as well as with SAE ie. running `wpa_supplicant`) equally. It doesn’t happen on all nodes, but only on those with rather bad signal or at least one far-off neighbor.

Maybe related to FS#1246

I saw this occuring on ubnt nanostation loco m5 XW as well as on all nanobeam m5 variants (which is supposedly compatible with the loco-m-xw image).

ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47

WiFi EEPROM of the devices:

*
00001000  02 02 F0 9F C2 XX XX XX  00 30 3a 31 35 3a 36 64  |.....XXX.0:15:6d|
00001010  3a 64 64 3a 64 65 3a 61  64 00 00 00 00 00 1f 00  |:dd:de:ad.......|
00001020  33 01 00 00 00 00 04 00  00 00 2d 04 03 00 08 ff  |3.........-.....|
00001030  20 01 00 00 00 20 02 00  00 cc cc 0c 00 50 01 50  | .... .......P.P|
00001040  01 50 01 00 00 00 00 00  00 21 00 a4 00 00 00 00  |.P.......!......|
00001050  ff 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001060  0e 0e 03 00 2c e2 00 02  0e 1c e0 e0 00 0c e0 e0  |....,...........|
00001070  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001080  00 00 00 00 00 00 00 00  00 00 70 89 ac 00 00 00  |..........p.....|
00001090  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000010c0  00 00 00 70 ac 70 89 ac  70 89 ac 70 89 ac 22 22  |...p.p..p..p..""|
000010d0  22 22 22 22 22 22 22 22  20 1c 22 22 20 1c 22 22  |"""""""" ."" .""|
000010e0  20 1c 24 24 20 18 16 14  20 16 14 12 20 20 1c 14  | .$$ ... ...  ..|
000010f0  24 24 20 18 16 14 20 16  14 12 20 20 1c 14 24 24  |$$ ... ...  ..$$|
00001100  20 18 16 14 20 16 14 12  20 20 1c 14 22 22 1e 16  | ... ...  ..""..|
00001110  14 12 1e 14 12 10 20 20  1c 14 22 22 1e 16 14 12  |......  ..""....|
00001120  1e 14 12 10 20 20 1c 14  22 22 1e 16 14 12 1e 14  |....  ..""......|
00001130  12 10 20 20 1c 14 11 12  15 17 41 42 45 47 31 32  |..  ......ABEG12|
00001140  35 37 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |57pu..pu..pu..pu|
00001150  ac b8 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |..pu..pu..pu..pu|
*
00001170  ac b8 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |..<|<|<|<|<|<|<||
00001180  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
000011a0  3c 7c 10 01 00 00 22 22  02 00 00 00 00 00 00 00  |<|....""........|
000011b0  00 00 00 00 00 00 44 00  00 00 00 00 00 ff 00 00  |......D.........|
000011c0  00 00 00 00 00 00 00 00  00 00 00 00 ff 0e 0e 03  |................|
000011d0  00 2d e2 00 02 0e 1c 00  00 00 00 00 00 00 00 00  |.-..............|
000011e0  00 00 00 00 00 00 00 00  00 44 44 00 00 00 00 00  |.........DD.....|
000011f0  00 00 00 00 00 00 00 4c  58 68 8c a4 b4 bd cd d9  |.......LXh......|
00001200  00 89 00 00 00 dc 00 89  00 00 00 e0 00 8a 00 00  |................|
00001210  00 e2 00 8b 00 00 00 de  00 8b 00 00 00 de 00 8b  |................|
00001220  00 00 00 dc 00 89 00 00  00 da 00 8b 00 00 00 e0  |................|
00001230  00 89 00 00 00 e4 00 8a  00 00 00 e7 00 8b 00 00  |................|
00001240  00 e6 00 8b 00 00 00 e2  00 8c 00 00 00 e1 00 8c  |................|
00001250  00 00 00 df 00 8b 00 00  00 dd 00 8b 00 00 00 00  |................|
00001260  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00001280  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 4c  |...............L|
00001290  54 68 78 8c a0 b4 c5 4c  54 68 78 8c a0 b4 c5 4c  |Thx....LThx....L|
000012a0  54 68 78 8c a0 b4 c5 26  20 1e 1c 26 20 1e 1c 26  |Thx....& ..& ..&|
000012b0  20 1e 1c 26 20 1e 1c 26  20 1e 1c 26 20 1e 1c 26  | ..& ..& ..& ..&|
000012c0  20 1e 1c 26 20 1e 1c 26  22 20 1e 1c 1a 20 1e 1c  | ..& ..&" ... ..|
000012d0  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
000012e0  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
000012f0  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001300  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001310  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001320  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
00001330  1e 1c 1a 00 00 00 00 26  22 20 1e 1c 1a 20 1e 1c  |.......&" ... ..|
00001340  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
00001350  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
00001360  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001370  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001380  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001390  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
000013a0  1e 1c 1a 00 00 00 00 10  16 18 40 46 48 30 36 38  |..........@FH068|
000013b0  4c 54 68 78 8c a0 b9 cd  4c 54 68 78 8c a0 b9 cd  |LThx....LThx....|
*
000013f0  4c 54 68 78 8c a0 b9 cd  3c 7c 3c 7c 3c 7c 3c 7c  |LThx....<|<|<|<||
00001400  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
00001440  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
13.07.201650Base systemBug ReportMediumLowNo image or non-verbose output created if image is too ...TrunkNew Task Description

The target/install target does not produce the *squashfs-factory.bin and *squashfs-sysupgrade.bin binaries if the images are too big to fit the selected flash size.
However, make doesn’t say a word to the user but simply does not produce the files. The user has to either check the mtime of the files if they were created earlier or use

make target/install V=s

to derive what’s wrong.
According to jow on IRC this is just an artifact of no way to bypass silent mode. That might be the common explanation but it is still a bug from my POV.

17.01.2017395Base systemBug ReportMediumLowmac80211.sh: detect_mac80211 should check available cha...TrunkNew Task Description

This problem was reported by few Netgear R8000 users and I managed to reproduce it. It’s related to the following code:

		vht_cap=$(iw phy "$dev" info | grep -c 'VHT Capabilities')
		cap_5ghz=$(iw phy "$dev" info | grep -c "Band 2")
		[ "$vht_cap" -gt 0 -a "$cap_5ghz" -gt 0 ] && {
			mode_band="a";
			channel="36"
			htmode="VHT80"
		}

Default htmode

The first problem is that even if hardware supports VHT80 it may be not available for every/any current channel. If channel 36 doesn’t support VHT80, for better user experience, it shouldn’t be set in /etc/config/wireless by default. Example:

root@lede:/# iw phy phy2 info
Wiphy phy2
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports roaming.
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 2:
                Capabilities: 0x1062
                        HT20/HT40
                        Static SM Power Save
                        RX HT20 SGI
                        RX HT40 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-23
                VHT Capabilities (0x0c025820):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        short GI (80 MHz)
                        SU Beamformer
                        SU Beamformee
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Frequencies:
                        * 5170 MHz [34] (disabled)
                        * 5180 MHz [36] (20.0 dBm)
                        * 5190 MHz [38] (disabled)
                        * 5200 MHz [40] (20.0 dBm)
                        * 5210 MHz [42] (disabled)
                        * 5220 MHz [44] (20.0 dBm)
                        * 5230 MHz [46] (disabled)
                        * 5240 MHz [48] (20.0 dBm)
                        * 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
                        * 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
                        * 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
                        * 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
                        * 5500 MHz [100] (20.0 dBm) (no IR, radar detection)
                        * 5520 MHz [104] (20.0 dBm) (no IR, radar detection)
                        * 5540 MHz [108] (20.0 dBm) (no IR, radar detection)
                        * 5560 MHz [112] (20.0 dBm) (no IR, radar detection)
                        * 5580 MHz [116] (20.0 dBm) (no IR, radar detection)
                        * 5600 MHz [120] (20.0 dBm) (no IR, radar detection)
                        * 5620 MHz [124] (20.0 dBm) (no IR, radar detection)
                        * 5640 MHz [128] (20.0 dBm) (no IR, radar detection)
                        * 5660 MHz [132] (20.0 dBm) (no IR, radar detection)
                        * 5680 MHz [136] (20.0 dBm) (no IR, radar detection)
                        * 5700 MHz [140] (20.0 dBm) (no IR, radar detection)
                        * 5720 MHz [144] (disabled)
                        * 5745 MHz [149] (disabled)
                        * 5765 MHz [153] (disabled)
                        * 5785 MHz [157] (disabled)
                        * 5805 MHz [161] (disabled)
                        * 5825 MHz [165] (disabled)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 1
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
                 * #{ AP } <= 4,
                   total <= 4, #channels <= 1, STA/AP BI must match
root@lede:/# iw phy phy2 channels
Band 2:
        * 5170 MHz [34] (disabled)
        * 5180 MHz [36] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+
        * 5190 MHz [38] (disabled)
        * 5200 MHz [40] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40-
        * 5210 MHz [42] (disabled)
        * 5220 MHz [44] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+
        * 5230 MHz [46] (disabled)
        * 5240 MHz [48] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40-
        * 5260 MHz [52] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5280 MHz [56] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5300 MHz [60] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5320 MHz [64] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5500 MHz [100] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5520 MHz [104] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5540 MHz [108] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5560 MHz [112] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5580 MHz [116] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5600 MHz [120] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5620 MHz [124] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5640 MHz [128] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5660 MHz [132] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5680 MHz [136] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5700 MHz [140] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5720 MHz [144] (disabled)
        * 5745 MHz [149] (disabled)
        * 5765 MHz [153] (disabled)
        * 5785 MHz [157] (disabled)
        * 5805 MHz [161] (disabled)
        * 5825 MHz [165] (disabled)

as you can see, VHT80 isn’t support on any currently available channel due to regulatory limits.

Default channel

Picking channel 36 blindly is a bad idea as it may not be available. In case of phy0/radio0 on Netgear R8000 only available channels are 149+ due to hardware/board design (see ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000).

root@lede:/# iw phy phy0 info
Wiphy phy0
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports roaming.
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 2:
                Capabilities: 0x1062
                        HT20/HT40
                        Static SM Power Save
                        RX HT20 SGI
                        RX HT40 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-23
                VHT Capabilities (0x0c025820):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        short GI (80 MHz)
                        SU Beamformer
                        SU Beamformee
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Frequencies:
                        * 5170 MHz [34] (disabled)
                        * 5180 MHz [36] (disabled)
                        * 5190 MHz [38] (disabled)
                        * 5200 MHz [40] (disabled)
                        * 5210 MHz [42] (disabled)
                        * 5220 MHz [44] (disabled)
                        * 5230 MHz [46] (disabled)
                        * 5240 MHz [48] (disabled)
                        * 5260 MHz [52] (disabled)
                        * 5280 MHz [56] (disabled)
                        * 5300 MHz [60] (disabled)
                        * 5320 MHz [64] (disabled)
                        * 5500 MHz [100] (disabled)
                        * 5520 MHz [104] (disabled)
                        * 5540 MHz [108] (disabled)
                        * 5560 MHz [112] (disabled)
                        * 5580 MHz [116] (disabled)
                        * 5600 MHz [120] (disabled)
                        * 5620 MHz [124] (disabled)
                        * 5640 MHz [128] (disabled)
                        * 5660 MHz [132] (disabled)
                        * 5680 MHz [136] (disabled)
                        * 5700 MHz [140] (disabled)
                        * 5720 MHz [144] (disabled)
                        * 5745 MHz [149] (20.0 dBm)
                        * 5765 MHz [153] (20.0 dBm)
                        * 5785 MHz [157] (20.0 dBm)
                        * 5805 MHz [161] (20.0 dBm)
                        * 5825 MHz [165] (20.0 dBm)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 1
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
                 * #{ AP } <= 4,
                   total <= 4, #channels <= 1, STA/AP BI must match
root@lede:/# iw phy phy0 channels
Band 2:
        * 5170 MHz [34] (disabled)
        * 5180 MHz [36] (disabled)
        * 5190 MHz [38] (disabled)
        * 5200 MHz [40] (disabled)
        * 5210 MHz [42] (disabled)
        * 5220 MHz [44] (disabled)
        * 5230 MHz [46] (disabled)
        * 5240 MHz [48] (disabled)
        * 5260 MHz [52] (disabled)
        * 5280 MHz [56] (disabled)
        * 5300 MHz [60] (disabled)
        * 5320 MHz [64] (disabled)
        * 5500 MHz [100] (disabled)
        * 5520 MHz [104] (disabled)
        * 5540 MHz [108] (disabled)
        * 5560 MHz [112] (disabled)
        * 5580 MHz [116] (disabled)
        * 5600 MHz [120] (disabled)
        * 5620 MHz [124] (disabled)
        * 5640 MHz [128] (disabled)
        * 5660 MHz [132] (disabled)
        * 5680 MHz [136] (disabled)
        * 5700 MHz [140] (disabled)
        * 5720 MHz [144] (disabled)
        * 5745 MHz [149] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+ VHT80
        * 5765 MHz [153] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40- VHT80
        * 5785 MHz [157] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+ VHT80
        * 5805 MHz [161] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40- VHT80
        * 5825 MHz [165] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz
14.05.20192283Base systemBug ReportMediumLowm76: crash when creating an additional monitor interfac...TrunkAssigned Task Description

OpenWrt: b65a270c851ee422f26a0af10c879ebb87cb8f76
mt76: 4.14.108+2019-03-27-a11b6734-1

While debugging an unicast wifi bug, I tried to create a mon0 interface
iw wlan0 interface add mon0 type monitor.

Modules:	mt7603e@830f0000+87a0	mt76@83128000+6060	mac80211@83080000+6a240	iptable_raw@83111000+2e0	iptable_nat@831c5000+340	iptable_mangle@83bd7000+400	iptable_filter@83135000+360	ipt_REJECT@831c3000+3a0	ipt_MASQUERADE@8311f000+280	ipt_ECN@83bca000+560	ip_tables@831c0000+2650	cfg80211@83000000+35fb0	xt_time@83bbd000+6c0	xt_tcpudp@83baa000+6e0	xt_tcpmss@831ac000+400	xt_statistic@8311d000+320	xt_state@83151000+2a0xt_recent@831ae000+1bf0	xt_nat@83bd0000+5e0	xt_multiport@83bd6000+4e0	xt_mark@83134000+280	xt_mac@83bd3000+240	xt_limit@8315f000+480	xt_length@83125000+2a0	xt_hl@83132000+300	xt_helper@83126000+340	xt_ecn@83127000+520	xt_dscp@8313c000+3c0	xt_conntrack@83ba8000+8e0	xt_connmark@8311c000+420	xt_connlimit@83136000+1110	xt_connbytes@83bcd000+620	xt_comment@83117000+1c0	xt_TCPMSS@83bd2000+800	xt_REDIRECT@83bce000+2a0	xt_LOG@83bcc000+280	xt_HL@83bc9000+520	xt_FLOWOFFLOAD@83bc7000+ab0	xt_DSCP@8313b000+5c0	xt_CT@8313d000+9e0	xt_CLASSIFY@83131000+220	x_tables@83bc0000+30f0	nf_reject_ipv4@83130000+780	nf_nat_redirect@8311e000+560	nf_nat_masquerade_ipv4@83bac000+590	nf_conntrack_ipv4@83bb8000+1100	nf_nat_ipv4@83bba000+c70	nf_nat@83120000+2250	nf_log_ipv4@83bad000+dc0	nf_log_common@83116000+980	nf_flow_table_hw@83bbe000+820	nf_flow_table@83ba4000+3310	nf_defrag_ipv4@83153000+3e0	nf_conntrack_rtcache@83112000+8a0	compat@83118000+1700	act_connmark@83113000+850	nf_conntrack@83100000+d2c0	sch_tbf@8314e000+1680	sch_ingress@8314a000+4a0	sch_htb@83ba0000+36d0	sch_hfsc@83158000+39e0	em_u32@831ba000+200	cls_u32@83154000+2330	cls_tcindex@8314c000+15c0	cls_route@831be000+1540	cls_matchall@831a3000+a20	cls_fw@83144000+1000	cls_flow@83148000+1780	cls_basic@831bb000+d00	act_skbedit@831b4000+9f0	act_mirred@831b5000+e50	ifb@831a0000+be0	l2tp_ip@8316e000+1410	l2tp_eth@831a4000+a00	l2tp_netlink@831a6000+1f90	l2tp_core@831a8000+3110	udp_tunnel@83b99000+920	leds_gpio@83b4f000+b20	gpio_button_hotplug@83b50000+1900
<6>[    0.191477] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.197077] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.203431] NET: Registered protocol family 1
<7>[    0.207612] PCI: CLS 0 bytes, default 32
<4>[    0.210849] Crashlog allocated RAM at address 0x3f00000
<6>[    0.217463] workingset: timestamp_bits=30 max_order=14 bucket_order=0
<6>[    0.229138] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.234765] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<6>[    0.254072] io scheduler noop registered
<6>[    0.257804] io scheduler deadline registered (default)
<6>[    0.263580] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
<6>[    0.270756] console [ttyS0] disabled
<6>[    0.274257] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
<6>[    0.282984] console [ttyS0] enabled
<6>[    0.289970] bootconsole [early0] disabled
<3>[    0.298544] cacheinfo: Failed to find cpu0 device node
<4>[    0.303799] cacheinfo: Unable to detect cache hierarchy for CPU 0
<6>[    0.310628] spi-mt7621 10000b00.spi: sys_freq: 193333333
<6>[    0.329261] m25p80 spi0.0: s25fl064k (8192 Kbytes)
<5>[    0.334207] 4 fixed-partitions partitions found on MTD device spi0.0
<5>[    0.340643] Creating 4 MTD partitions on "spi0.0":
<5>[    0.345526] 0x000000000000-0x000000020000 : "boot"
<5>[    0.351255] 0x000000020000-0x0000007c0000 : "firmware"
<5>[    0.359405] 2 tplink-fw partitions found on MTD device firmware
<5>[    0.365482] Creating 2 MTD partitions on "firmware":
<5>[    0.370527] 0x000000000000-0x00000014f3a3 : "kernel"
<5>[    0.376451] 0x00000014f3a4-0x0000007a0000 : "rootfs"
<5>[    0.382277] mtd: device 3 (rootfs) set to be root filesystem
<5>[    0.389534] 1 squashfs-split partitions found on MTD device rootfs
<5>[    0.395888] 0x000000390000-0x0000007a0000 : "rootfs_data"
<5>[    0.402220] 0x0000007c0000-0x0000007d0000 : "config"
<5>[    0.408051] 0x0000007d0000-0x000000800000 : "factory"
<6>[    0.414688] libphy: Fixed MDIO Bus: probed
<6>[    0.431000] rt3050-esw 10110000.esw: link changed 0x00
<6>[    0.437801] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
<6>[    0.447188] NET: Registered protocol family 17
<6>[    0.451831] 8021q: 802.1Q VLAN Support v1.8
<6>[    0.468953] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
<6>[    0.476929] Freeing unused kernel memory: 136K
<4>[    0.481474] This architecture does not have kernel memory protection.
<14>[    1.719920] init: Console is alive
<14>[    1.723707] init: - watchdog -
<5>[    2.267376] random: fast init done
<14>[    3.000227] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<14>[    3.073195] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[    3.091032] init: - preinit -
<6>[    4.256850] rt3050-esw 10110000.esw: link changed 0x00
<5>[    4.687762] random: procd: uninitialized urandom read (4 bytes read)
<13>[    4.780523] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
<12>[    4.822673] urandom-seed: Seed file not found (/etc/urandom.seed)
<14>[    4.918017] procd: - early -
<14>[    4.921055] procd: - watchdog -
<14>[    5.550307] procd: - watchdog -
<14>[    5.553880] procd: - ubus -
<5>[    5.600493] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[    5.667639] random: ubusd: uninitialized urandom read (4 bytes read)
<14>[    5.675598] procd: - init -
<14>[    6.002174] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[    6.011883] l2tp_core: L2TP core driver, V2.0
<6>[    6.017941] l2tp_netlink: L2TP netlink interface
<6>[    6.024375] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
<6>[    6.032295] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
<6>[    6.044769] Mirror/redirect action on
<6>[    6.141161] u32 classifier
<6>[    6.143986]     input device check on
<6>[    6.147693]     Actions configured
<6>[    6.239795] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
<6>[    6.260517] Loading modules backported from Linux version v4.19.23-0-g67d52fae61c1
<6>[    6.268272] Backport generated by backports.git v4.19.23-1-0-g480a925a
<6>[    6.488990] xt_time: kernel timezone is -0000
<6>[    6.514755] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    6.566528] mt76_wmac 10300000.wmac: ASIC revision: 76280001
<6>[    7.593554] mt76_wmac 10300000.wmac: Firmware Version: 20151201
<6>[    7.599575] mt76_wmac 10300000.wmac: Build Time: 20151201183641
<6>[    7.621350] mt76_wmac 10300000.wmac: firmware init done
<6>[    7.728549] rt3050-esw 10110000.esw: link changed 0x01
<7>[    7.792147] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<14>[    7.802137] kmodloader: done loading kernel modules from /etc/modules.d/*
<4>[    9.177342] urandom_read: 6 callbacks suppressed
<5>[    9.177353] random: jshn: uninitialized urandom read (4 bytes read)
<6>[   11.971477] rt3050-esw 10110000.esw: link changed 0x00
<6>[   15.521829] rt3050-esw 10110000.esw: link changed 0x01
<6>[   40.298153] rt3050-esw 10110000.esw: link changed 0x00
<6>[   43.783225] rt3050-esw 10110000.esw: link changed 0x01
<6>[   44.432507] device eth0 entered promiscuous mode
<6>[   50.910274] br-lan: port 1(eth0.1) entered blocking state
<6>[   50.915855] br-lan: port 1(eth0.1) entered disabled state
<6>[   50.921660] device eth0.1 entered promiscuous mode
<6>[   50.939619] br-lan: port 1(eth0.1) entered blocking state
<6>[   50.945176] br-lan: port 1(eth0.1) entered forwarding state
<6>[   51.073380] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.080911] device eth0.1 left promiscuous mode
<6>[   51.085686] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.170750] br-lan: port 1(eth0.1) entered blocking state
<6>[   51.176313] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.182108] device eth0.1 entered promiscuous mode
<6>[   51.234695] br-lan: port 1(eth0.1) entered blocking state
<6>[   51.240185] br-lan: port 1(eth0.1) entered forwarding state
<6>[   54.284409] br-lan: port 2(wlan0) entered blocking state
<6>[   54.290155] br-lan: port 2(wlan0) entered disabled state
<6>[   54.295937] device wlan0 entered promiscuous mode
<6>[   55.227079] br-lan: port 2(wlan0) entered blocking state
<6>[   55.232548] br-lan: port 2(wlan0) entered forwarding state
<6>[   65.499313] device wlan0 left promiscuous mode
<6>[   65.504001] br-lan: port 2(wlan0) entered disabled state
<6>[   67.659749] br-lan: port 2(wlan0) entered blocking state
<6>[   67.665252] br-lan: port 2(wlan0) entered disabled state
<6>[   67.670929] device wlan0 entered promiscuous mode
<6>[   67.675848] br-lan: port 2(wlan0) entered blocking state
<6>[   67.681236] br-lan: port 2(wlan0) entered forwarding state
<6>[   67.687263] br-lan: port 2(wlan0) entered disabled state
<6>[   70.171904] br-lan: port 2(wlan0) entered blocking state
<6>[   70.177326] br-lan: port 2(wlan0) entered forwarding state
<4>[   74.063128] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
<4>[   74.076565] jffs2_build_filesystem(): unlocking the mtd device... 
<4>[   74.076626] done.
<4>[   74.084920] jffs2_build_filesystem(): erasing all blocks after the end marker... 
<5>[   75.341427] random: crng init done
<4>[   89.806667] done.
<5>[   89.808667] jffs2: notice: (2808) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
<4>[   90.097054] overlayfs: upper fs does not support tmpfile.
<6>[95491.758861] device wlan0 left promiscuous mode
<6>[95491.763556] br-lan: port 2(wlan0) entered disabled state
<6>[95496.123525] br-lan: port 2(wlan0) entered blocking state
<6>[95496.128998] br-lan: port 2(wlan0) entered disabled state
<6>[95496.134779] device wlan0 entered promiscuous mode
<6>[95496.139678] br-lan: port 2(wlan0) entered blocking state
<6>[95496.145064] br-lan: port 2(wlan0) entered forwarding state
<6>[95496.151480] br-lan: port 2(wlan0) entered disabled state
<6>[95497.434477] br-lan: port 2(wlan0) entered blocking state
<6>[95497.439926] br-lan: port 2(wlan0) entered forwarding state
<6>[181891.461089] device wlan0 left promiscuous mode
<6>[181891.465866] br-lan: port 2(wlan0) entered disabled state
<6>[181895.862824] br-lan: port 2(wlan0) entered blocking state
<6>[181895.868387] br-lan: port 2(wlan0) entered disabled state
<6>[181895.874262] device wlan0 entered promiscuous mode
<6>[181897.223872] br-lan: port 2(wlan0) entered blocking state
<6>[181897.229417] br-lan: port 2(wlan0) entered forwarding state
<6>[268291.119138] device wlan0 left promiscuous mode
<6>[268291.123910] br-lan: port 2(wlan0) entered disabled state
<6>[268296.605568] br-lan: port 2(wlan0) entered blocking state
<6>[268296.611162] br-lan: port 2(wlan0) entered disabled state
<6>[268296.616932] device wlan0 entered promiscuous mode
<6>[268298.034899] br-lan: port 2(wlan0) entered blocking state
<6>[268298.040440] br-lan: port 2(wlan0) entered forwarding state
<6>[354690.783285] device wlan0 left promiscuous mode
<6>[354690.788153] br-lan: port 2(wlan0) entered disabled state
<6>[354695.110340] br-lan: port 2(wlan0) entered blocking state
<6>[354695.115924] br-lan: port 2(wlan0) entered disabled state
<6>[354695.121790] device wlan0 entered promiscuous mode
<6>[354696.496658] br-lan: port 2(wlan0) entered blocking state
<6>[354696.502208] br-lan: port 2(wlan0) entered forwarding state
<6>[441090.473174] device wlan0 left promiscuous mode
<6>[441090.478041] br-lan: port 2(wlan0) entered disabled state
<6>[441094.831626] br-lan: port 2(wlan0) entered blocking state
<6>[441094.837188] br-lan: port 2(wlan0) entered disabled state
<6>[441094.843056] device wlan0 entered promiscuous mode
<6>[441094.848063] br-lan: port 2(wlan0) entered blocking state
<6>[441094.853538] br-lan: port 2(wlan0) entered forwarding state
<6>[441094.860044] br-lan: port 2(wlan0) entered disabled state
<6>[441096.143580] br-lan: port 2(wlan0) entered blocking state
<6>[441096.149126] br-lan: port 2(wlan0) entered forwarding state
<6>[527490.172730] device wlan0 left promiscuous mode
<6>[527490.177478] br-lan: port 2(wlan0) entered disabled state
<6>[527494.541946] br-lan: port 2(wlan0) entered blocking state
<6>[527494.547517] br-lan: port 2(wlan0) entered disabled state
<6>[527494.553391] device wlan0 entered promiscuous mode
<6>[527495.938895] br-lan: port 2(wlan0) entered blocking state
<6>[527495.944394] br-lan: port 2(wlan0) entered forwarding state
<1>[592589.839671] CPU 0 Unable to handle kernel paging request at virtual address 000002c8, epc == 830af554, ra == 83082384
<4>[592589.850591] Oops[#1]:
<4>[592589.852986] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.108 #0
<4>[592589.859074] task: 803cb430 task.stack: 803c6000
<4>[592589.863748] $ 0   : 00000000 80410000 00000000 00000000
<4>[592589.869140] $ 4   : 00000000 838cbd80 00000000 00000000
<4>[592589.874531] $ 8   : 838cb1c8 82f18516 00000010 43420000
<4>[592589.879922] $12   : 087f0000 00000000 000a9a0e 00000004
<4>[592589.885312] $16   : 838cbd80 00000000 830ecbc0 830ecbc0
<4>[592589.890703] $20   : 83b61bf0 830f73ac 00000001 00000000
<4>[592589.896093] $24   : 00000010 801bcbe0                  
<4>[592589.901484] $28   : 803c6000 83807e18 830ede88 83082384
<4>[592589.906876] Hi    : 005a1ac2
<4>[592589.909878] Lo    : ef14c145
<4>[592589.912889] epc   : 830af554 0x830af554 [mac80211@83080000+0x6a240]
<4>[592589.919330] ra    : 83082384 0x83082384 [mac80211@83080000+0x6a240]
<4>[592589.925764] Status: 1100e403	KERNEL EXL IE 
<4>[592589.930096] Cause : 00800008 (ExcCode 02)
<4>[592589.934243] BadVA : 000002c8
<4>[592589.937246] PrId  : 00019655 (MIPS 24KEc)
<4>[592589.941392] Modules linked in: mt7603e mt76 mac80211 iptable_raw iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY x_tables nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_log_common nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache compat act_connmark nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ifb
<4>[592590.013247]  l2tp_ip l2tp_eth l2tp_netlink l2tp_core udp_tunnel leds_gpio gpio_button_hotplug
<4>[592590.021995] Process swapper (pid: 0, threadinfo=803c6000, task=803cb430, tls=00000000)
<4>[592590.030101] Stack : 83807e7c 0000008a 00000000 838cbd80 838cbd80 83082384 00000050 830ecbc0
<4>[592590.038670]         83b61bf0 830f73ac 830ed4e0 00000000 838cb180 00000000 00000000 830ecbc0
<4>[592590.047239]         83b61bf0 830f73ac 830ed4e0 00000001 830ecbc0 830adb78 00000cfc 0000033f
<4>[592590.055808]         8381b800 00000080 00000000 00000000 00060036 00000000 830ed4e0 83b61bf0
<4>[592590.064376]         00000004 00000003 00000006 830f73f0 83807ee0 80058f30 803dfc40 00000003
<4>[592590.072945]         ...
<4>[592590.075510] Call Trace:
<4>[592590.075556] [<83082384>] 0x83082384 [mac80211@83080000+0x6a240]
<4>[592590.084214] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.090146] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.096068] [<830adb78>] 0x830adb78 [mac80211@83080000+0x6a240]
<4>[592590.102173] [<830f73f0>] 0x830f73f0 [mt7603e@830f0000+0x87a0]
<4>[592590.108088] [<80058f30>] 0x80058f30
<4>[592590.111724] [<830b4d80>] 0x830b4d80 [mac80211@83080000+0x6a240]
<4>[592590.117809] [<80009e70>] 0x80009e70
<4>[592590.121449] [<830f7548>] 0x830f7548 [mt7603e@830f0000+0x87a0]
<4>[592590.127377] [<8002d078>] 0x8002d078
<4>[592590.130998] [<80009e70>] 0x80009e70
<4>[592590.134619] [<80351a20>] 0x80351a20
<4>[592590.138240] [<8005d978>] 0x8005d978
<4>[592590.141866] [<80058f30>] 0x80058f30
<4>[592590.145491] [<80009e70>] 0x80009e70
<4>[592590.149109] 
<4>[592590.150701] Code: 27bdffe8  afbf0014  afb00010 <8c9002c8> 8caa00a4  1080001e  8e090438  8e030044  0123402a 
<4>[592590.160690] 
<4>[592590.162335] ---[ end trace 25bbd90279e222f9 ]---

===================================
01.01.20213552Base systemBug ReportMediumLowLinksys RE6500 bootloops with latest snapshotsTrunkNew Task Description

The RE6500 was working fine on an old 19.07 snapshot: OpenWrt 19.07-SNAPSHOT r10578-b3d70f628b

I sysupgraded to latest snapshot and it does not come up. Judging from the LEDs, it seems to bootloop.

Booting the latest snapshot initramfs through TFTP works. I sysupgraded again from the initramfs, and it still bootloops.

Possibly related to FS#3539. I will try to get a serial output to see what happens.

08.05.20203070Base systemBug ReportMediumLowkmod-cryptodev: WARNING: possible circular locking depe...TrunkNew Task Description

OpenWrt master r13174-73fa1aba94 on octeon with kernel 5.4

[   70.971145] 
[   70.972662] ======================================================
[   70.978843] WARNING: possible circular locking dependency detected
[   70.985029] 5.4.39 #0 Not tainted
[   70.988348] ------------------------------------------------------
[   70.994531] unbound/2895 is trying to acquire lock:
[   70.999414] 800000041baeb868 (&pcr->fcrypt.sem){+.+.}, at: crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.009267] 
[   71.009267] but task is already holding lock:
[   71.015103] 800000041b911468 (&ses_new->sem){+.+.}, at: crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.024691] 
[   71.024691] which lock already depends on the new lock.
[   71.024691] 
[   71.032866] 
[   71.032866] the existing dependency chain (in reverse order) is:
[   71.040347] 
[   71.040347] -> #1 (&ses_new->sem){+.+.}:
[   71.045773]        lock_acquire+0xe0/0x220
[   71.049888]        __mutex_lock+0x94/0x628
[   71.054001]        crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.060365]        crypto_get_session_by_sid+0x1e4/0x12b8 [cryptodev]
[   71.066806]
[   71.066806] -> #0 (&pcr->fcrypt.sem){+.+.}:
[   71.072485]        check_noncircular+0x1a8/0x260
[   71.077110]        __lock_acquire+0x12f8/0x19f8
[   71.081648]        lock_acquire+0xe0/0x220
[   71.085754]        __mutex_lock+0x94/0x628
[   71.089862]        crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.096226]        crypto_get_session_by_sid+0x6cc/0x12b8 [cryptodev]
[   71.102666]
[   71.102666] other info that might help us debug this:
[   71.102666]
[   71.110668]  Possible unsafe locking scenario:
[   71.110668]
[   71.116588]        CPU0                    CPU1
[   71.121119]        ----                    ----
[   71.125650]   lock(&ses_new->sem);
[   71.129058]                                lock(&pcr->fcrypt.sem);
[   71.135242]                                lock(&ses_new->sem);
[   71.141165]   lock(&pcr->fcrypt.sem);
[   71.144834]
[   71.144834]  *** DEADLOCK ***
[   71.144834]
[   71.150756] 1 lock held by unbound/2895:
[   71.154681]  #0: 800000041b911468 (&ses_new->sem){+.+.}, at: crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.164700]
[   71.164700] stack backtrace:
[   71.169067] CPU: 1 PID: 2895 Comm: unbound Not tainted 5.4.39 #0
[   71.175075] Stack : ffffffff82790000 0000000000000000 0000000010108ce0 ed34220aed96997f
[   71.183091]         ed34220aed96997f 0000000000000000 800000041bb976f8 ffffffff837d0000
[   71.191106]         0000000000000000 0000000000000001 0000000000000000 ffffffff811ac4bc
[   71.199118]         6e626f756e64204e 0000000000000000 ffffffffffffffff 0000000000000010
[   71.207132]         0000000000000000 ffffffff81b40000 fffe000000000000 ffffffff81bc0000
[   71.215145]         0000000000000000 0000000000000000 ffffffff81b40000 0000000000000000
[   71.223158]         800000041f2e6200 0000000000000000 ffffffff81597628 1e00000010734ac7
[   71.231173]         0000000000000001 800000041bb94000 800000041bb976f0 47500c0a872e7996
[   71.239186]         ffffffff81865d8c 0000000000000000 800000041bb97828 ed34220aed96997f
[   71.247198]         ffffffff81b40bf7 ffffffff81865c54 ffffffff8111d4c8 ffffffff81a42a50
[   71.255213]         ...
[   71.257668] Call Trace:
[   71.260136] [<ffffffff8111d4c8>] show_stack+0x40/0x128
[   71.265288] [<ffffffff81865d8c>] dump_stack+0xe4/0x150
[   71.270444] [<ffffffff8119fb58>] check_noncircular+0x1a8/0x260
[   71.276289] [<ffffffff811a2d38>] __lock_acquire+0x12f8/0x19f8
[   71.282046] [<ffffffff811a3d80>] lock_acquire+0xe0/0x220
[   71.287374] [<ffffffff8188532c>] __mutex_lock+0x94/0x628
[   71.292706] [<ffffffffc02a7638>] crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.300290] [<ffffffffc02a7cc4>] crypto_get_session_by_sid+0x6cc/0x12b8 [cryptodev]
07.09.20181837Base systemBug ReportMediumMediumKernel oops when using wireguard and mangle/fwmarkopenwrt-19.07New Task Description

On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Ethernet interface being the head-unit connected to a VLAN switch.

Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664463] INFO: rcu_sched self-detected stall on CPU
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664907] 	1-...: (5999 ticks this GP) idle=9ee/140000000000001/0 softirq=961867/961867 fqs=2711
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.665571] 	 (t=6000 jiffies g=358062 c=358061 q=4475)
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.665986] NMI backtrace for cpu 1
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666301] CPU: 1 PID: 14102 Comm: kworker/1:0 Not tainted 4.14.63 #0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666775] Hardware name: XXXXXXXXXX
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667240] Workqueue: wg-crypt-XXXXX 0xffffffffa01dbab0 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667891] Call Trace:
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668145]  <IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668372]  0xffffffff8159c6d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668662]  0xffffffff815a0000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668950]  ? 0xffffffff810418d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669251]  0xffffffff815a0060
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669544]  0xffffffff81041924
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669836]  0xffffffff810c22e3
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670128]  0xffffffff810c176f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670421]  ? 0xffffffff8109fe35
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670720]  ? 0xffffffff810a0062
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671020]  0xffffffff810c432a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671309]  0xffffffff810d0f5e
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671599]  0xffffffff810c4c4f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671892]  0xffffffff810c4df6
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672182]  0xffffffff81602392
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672473]  0xffffffff81601a61
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672760]  </IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672994] RIP: 0010:0xffffffff814e7682
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673327] RSP: 0018:ffffc90000cb3a30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673912] RAX: 00000000000001f8 RBX: ffffc90000cb3af8 RCX: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674426] RDX: ffff880077923e00 RSI: 00000000deb48eb9 RDI: ffff88007aa28e68
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674944] RBP: ffffc90000cb3a80 R08: 0000000000000000 R09: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675456] R10: ffff88007aa28e00 R11: 0000000000000001 R12: ffff880077923e00
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675966] R13: ffffc90000cb3a90 R14: ffff8800786e3a00 R15: ffff88007a360000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676484]  0xffffffff814e7a0a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676773]  0xffffffff814e7d89
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677065]  0xffffffff81532536
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677359]  0xffffffffa01800a7 [iptable_mangle@ffffffffa0180000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677845]  0xffffffff814e2966
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678137]  0xffffffff814ed868
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678430]  ? 0xffffffff814ebed0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678725]  0xffffffff814ed897
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679014]  0xffffffff8152b6bb
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679309]  0xffffffffa002145e [udp_tunnel@ffffffffa0021000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679786]  0xffffffffa01ddf81 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680256]  ? 0xffffffff811038aa
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680555]  ? 0xffffffff810c5454
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680854]  0xffffffffa01dbb5a [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681321]  0xffffffff81091cf4
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681613]  0xffffffff8109204b
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681903]  0xffffffff81096d42
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682191]  ? 0xffffffff81091e40
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682487]  ? 0xffffffff81096c30
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682788]  0xffffffff816001ef

Bootlog:

[    0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Wed Aug 15 20:42:39 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f1b2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f1b3000-0x000000007f1fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f1fb000-0x000000007f314fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f315000-0x000000007f324fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f325000-0x000000007f33bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f344000-0x000000007f358fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f359000-0x000000007f359fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f35a000-0x000000007f377fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f378000-0x000000007f37bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f37c000-0x000000007f38afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f38b000-0x000000007f39bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39c000-0x000000007f39dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f39e000-0x000000007f39efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39f000-0x000000007f3ccfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f3cd000-0x000000007f40ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f410000-0x000000007f58efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f6e5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f6e6000-0x000000007f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Medion E1230/E1230, BIOS 208 02/10/2012
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 write-through
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffffffffff400d10]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[    0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[    0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[    0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[    0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[    0.000000] BRK [0x01e0c000, 0x01e0cfff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MEDION)
[    0.000000] ACPI: XSDT 0x000000007F315070 00005C (v01 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007F3236E8 0000F4 (v04 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007F315158 00E58C (v02 MEDION MEDIONAG 00000001 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000007F390F80 000040
[    0.000000] ACPI: APIC 0x000000007F3237E0 000072 (v03 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: SLIC 0x000000007F323858 000176 (v01 MEDION MEDIONAG 00000001 MSFT 00000001)
[    0.000000] ACPI: ECDT 0x000000007F3239D0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x000000007F323A98 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007F323AD8 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x000000007F323B10 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6effff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f1b2fff]
[    0.000000]   node   0: [mem 0x000000007f410000-0x000000007f58efff]
[    0.000000]   node   0: [mem 0x000000007f6e6000-0x000000007f6effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[    0.000000] On node 0 totalpages: 520921
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 516924 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] random: get_random_bytes called from 0xffffffff81cb0b09 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff88007ee00000 s132056 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s132056 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 512744
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2032612K/2083684K available (8200K kernel code, 527K rwdata, 1312K rodata, 1052K init, 420K bss, 51072K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.040000] tsc: Unable to calibrate against PIT
[    0.040000] tsc: using HPET reference calibration
[    0.040000] tsc: Detected 1595.996 MHz processor
[    0.040000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=15959960)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] ACPI: Core revision 20170728
[    0.068326] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.070105] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.070601] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.071425] Disabled fast string operations
[    0.071787] mce: CPU supports 5 MCE banks
[    0.072125] process: using mwait in idle threads
[    0.072500] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.072914] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.073530] Freeing SMP alternatives memory: 28K
[    0.080265] smpboot: Max logical packages: 2
[    0.081106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.190000] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.190000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.190000] ... version:                3
[    0.190000] ... bit width:              40
[    0.190000] ... generic registers:      2
[    0.190000] ... value mask:             000000ffffffffff
[    0.190000] ... max period:             000000007fffffff
[    0.190000] ... fixed-purpose events:   3
[    0.190000] ... event mask:             0000000700000003
[    0.190000] Hierarchical SRCU implementation.
[    0.190000] smp: Bringing up secondary CPUs ...
[    0.190000] x86: Booting SMP configuration:
[    0.190000] .... node  #0, CPUs:      #1
[    0.010000] Disabled fast string operations
[    0.190000]  #2
[    0.010000] Disabled fast string operations
[    0.190386]  #3
[    0.010000] Disabled fast string operations
[    0.193013] smp: Brought up 1 node, 4 CPUs
[    0.193365] smpboot: Total of 4 processors activated (12767.96 BogoMIPS)
[    0.195434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196180] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.197097] NET: Registered protocol family 16
[    0.198390] cpuidle: using governor ladder
[    0.198390] ACPI: bus type PCI registered
[    0.198390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.200004] PCI: Using configuration type 1 for base access
[    0.217580] ACPI: Added _OSI(Module Device)
[    0.217940] ACPI: Added _OSI(Processor Device)
[    0.218293] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218673] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219086] ACPI: EC: EC started
[    0.219370] ACPI: EC: interrupt blocked
[    0.222270] ACPI: \: Used as first EC
[    0.222591] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.223021] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.223763] ACPI: Executed 1 blocks of module-level executable AML code
[    0.240673] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.242268] ACPI: Dynamic OEM Table Load:
[    0.242613] ACPI: SSDT 0xFFFF88007BD5D800 0002E9 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.246636] ACPI: Dynamic OEM Table Load:
[    0.247070] ACPI: SSDT 0xFFFF88007BC81000 0006DB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.254189] ACPI: Dynamic OEM Table Load:
[    0.256660] ACPI: SSDT 0xFFFF88007C6CB000 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.257695] ACPI: Dynamic OEM Table Load:
[    0.260047] ACPI: SSDT 0xFFFF88007C7DE540 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.264783] ACPI: Interpreter enabled
[    0.265199] ACPI: (supports S0 S5)
[    0.265579] ACPI: Using IOAPIC for interrupt routing
[    0.268058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270580] ACPI: GPE 0x02 active on init
[    0.272964] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.305839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305839] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[    0.305839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.306311] PCI host bridge to bus 0000:00
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.306311] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306721] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[    0.310006] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[    0.310006] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[    0.310006] pci 0000:00:02.0: reg 0x14: [io  0xf100-0xf107]
[    0.315634] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.315634] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[    0.315634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.315960] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.315960] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.316454] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.316454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.316867] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.316867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.317285] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.317285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.317706] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.317706] pci 0000:00:1d.0: reg 0x20: [io  0xf0a0-0xf0bf]
[    0.318128] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.318128] pci 0000:00:1d.1: reg 0x20: [io  0xf080-0xf09f]
[    0.318515] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.318515] pci 0000:00:1d.2: reg 0x20: [io  0xf060-0xf07f]
[    0.318938] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.318938] pci 0000:00:1d.3: reg 0x20: [io  0xf040-0xf05f]
[    0.319336] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.319336] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[    0.319336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.320072] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.320513] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.323112] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.323112] pci 0000:00:1f.2: reg 0x10: [io  0xf0f0-0xf0f7]
[    0.323112] pci 0000:00:1f.2: reg 0x14: [io  0xf0e0-0xf0e3]
[    0.323112] pci 0000:00:1f.2: reg 0x18: [io  0xf0d0-0xf0d7]
[    0.323112] pci 0000:00:1f.2: reg 0x1c: [io  0xf0c0-0xf0c3]
[    0.323112] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf02f]
[    0.323112] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[    0.323112] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.323324] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.324155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.324284] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[    0.324284] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x18: [mem 0xdfe11000-0xdfe11fff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x20: [mem 0xdfe10000-0xdfe10fff 64bit]
[    0.324284] pci 0000:02:00.0: supports D1
[    0.324284] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.324922] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.330068] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.330359] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.330469] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.330614] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[    0.332600] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[    0.333006] pci 0000:03:00.0: supports D1 D2
[    0.333011] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.333210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.333620] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.333630] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.333927] pci 0000:04:00.0: [8086:0896] type 00 class 0x028000
[    0.334057] pci 0000:04:00.0: reg 0x10: [mem 0xdfc00000-0xdfc01fff 64bit]
[    0.334763] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.334942] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.335350] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.335528] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.336039] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.336044] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336049] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336053] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.336057] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.336062] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.336066] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[    0.336070] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.336130] pci_bus 0000:00: on NUMA node 0
[    0.337515] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.338262] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.346039] ACPI: EC: interrupt unblocked
[    0.346039] ACPI: EC: event unblocked
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.348684] SCSI subsystem initialized
[    0.349211] libata version 3.00 loaded.
[    0.349211] ACPI: bus type USB registered
[    0.349789] usbcore: registered new interface driver usbfs
[    0.350039] usbcore: registered new interface driver hub
[    0.350749] usbcore: registered new device driver usb
[    0.351384] PCI: Using ACPI for IRQ routing
[    0.351384] PCI: pci_cache_line_size set to 64 bytes
[    0.351384] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f1b3000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f58f000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[    0.352856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.353253] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.355766] clocksource: Switched to clocksource hpet
[    0.356312] pnp: PnP ACPI init
[    0.357109] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.357615] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.357767] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.358214] system 00:01: [io  0x1000-0x1003] has been reserved
[    0.358667] system 00:01: [io  0x1010-0x101f] has been reserved
[    0.359103] system 00:01: [io  0xffff] has been reserved
[    0.359513] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.359952] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.359952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:02: [io  0x06a0-0x06af] has been reserved
[    0.359952] system 00:02: [io  0x06b0-0x06ff] has been reserved
[    0.359952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.359952] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.359952] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:06: [io  0x025d] has been reserved
[    0.359952] system 00:06: [io  0x025c] has been reserved
[    0.359952] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.360167] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.360645] system 00:06: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.361121] system 00:06: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.361592] system 00:06: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.362072] system 00:06: [mem 0xfec28000-0xfec2ffff] has been reserved
[    0.362553] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.363064] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.363263] pnp 00:07: Plug and Play ACPI device, IDs SYN1d1b SYN1d00 SYN0002 PNP0f13 (active)
[    0.363394] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.363524] system 00:09: [io  0x0240-0x0259] has been reserved
[    0.363991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.364879] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[    0.365372] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.365873] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.366363] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.366857] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367408] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.367898] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.368395] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.368805] system 00:0c: [io  0x0400-0x047f] has been reserved
[    0.369252] system 00:0c: [io  0x0500-0x053f] has been reserved
[    0.369693] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.370228] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.370705] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.371182] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.371676] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[    0.372171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372179] pnp: PnP ACPI: found 13 devices
[    0.380957] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.381648] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.381656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.381662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.381681] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.381688] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.381708] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.381726] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.381733] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.381781] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.382273] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.382870] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.383462] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.384060] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.384646] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.385095] pci 0000:00:1c.1: BAR 7: assigned [io  0x3000-0x3fff]
[    0.385545] pci 0000:00:1c.3: BAR 7: assigned [io  0x4000-0x4fff]
[    0.385998] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.386387] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.386830] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.387314] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.387902] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.388285] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.388736] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.389226] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.389817] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.390233] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.390690] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.391180] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.391775] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.392157] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.392608] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.393098] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.393700] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.394103] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.394108] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.394113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394122] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394126] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394131] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394135] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394140] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.394144] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.394149] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.394153] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.394158] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.394162] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.394166] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.394171] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.394175] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.394179] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.394184] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.394188] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.394193] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.394197] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.394202] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394206] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394210] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394215] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394219] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394224] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394458] NET: Registered protocol family 2
[    0.395149] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.395801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.396424] TCP: Hash tables configured (established 16384 bind 16384)
[    0.397028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.397512] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.398146] NET: Registered protocol family 1
[    0.398540] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.401674] PCI: CLS 64 bytes, default 64
[    0.404203] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    0.408673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.411230] io scheduler noop registered
[    0.411556] io scheduler deadline registered (default)
[    0.412180] gpio_it87: Unknown Chip found, Chip 0202 Revision 2
[    0.413720] hv_vmbus: registering driver hv_pci
[    0.414138] hv_vmbus: registering driver hyperv_fb
[    0.414552] intel_idle: MWAIT substates: 0x3020220
[    0.414554] intel_idle: v0.4.1 model 0x36
[    0.415019] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.415333] ACPI: AC Adapter [AC0] (on-line)
[    0.440589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.470262] ACPI: Lid Switch [LID]
[    0.470749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.471442] ACPI: Sleep Button [SLPB]
[    0.471890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.472528] ACPI: Power Button [PWRF]
[    0.474911] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.475996] thermal LNXTHERM:00: registered as thermal_zone0
[    0.476418] ACPI: Thermal Zone [THRM] (63 C)
[    0.477238] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.480090] Non-volatile memory driver v1.3
[    0.483829] loop: module loaded
[    0.484309] Guest personality initialized and is inactive
[    0.484904] VMCI host device registered (name=vmci, major=10, minor=63)
[    0.485403] Initialized host personality
[    0.485993] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[    0.487067] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[    0.488126] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170728/utaddress-247)
[    0.489188] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20170728/utaddress-247)
[    0.490317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.VGA.TCOI) (20170728/utaddress-247)
[    0.491442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.492164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.493231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.495362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.496081] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.497151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.498214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.498935] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.499659] VMware PVSCSI driver - version 1.0.7.0-k
[    0.500186] hv_vmbus: registering driver hv_storvsc
[    0.500738] ahci 0000:00:1f.2: version 3.0
[    0.501106] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.501649] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.502258] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
[    0.504418] scsi host0: ahci
[    0.505055] scsi host1: ahci
[    0.505678] scsi host2: ahci
[    0.506330] scsi host3: ahci
[    0.506778] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[    0.507357] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[    0.507918] ata3: DUMMY
[    0.508159] ata4: DUMMY
[    0.508915] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[    0.509469] hv_vmbus: registering driver hv_netvsc
[    0.509854] Fusion MPT base driver 3.04.20
[    0.510250] Copyright (c) 1999-2008 LSI Corporation
[    0.510709] Fusion MPT SPI Host driver 3.04.20
[    0.511120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.511607] ehci-pci: EHCI PCI platform driver
[    0.512763] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.513192] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.513793] ehci-pci 0000:00:1d.7: debug port 1
[    0.514113] ACPI: Battery Slot [BAT0] (battery present)
[    0.518488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.518522] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[    0.540123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.541063] hub 1-0:1.0: USB hub found
[    0.541418] hub 1-0:1.0: 8 ports detected
[    0.542734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.543221] ohci-pci: OHCI PCI platform driver
[    0.543620] ohci-platform: OHCI generic platform driver
[    0.544568] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.544990] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.546233] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010
[    0.547982] hub 2-0:1.0: USB hub found
[    0.548435] hub 2-0:1.0: 2 ports detected
[    0.549241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.549668] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.550303] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    0.550935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.551899] hub 3-0:1.0: USB hub found
[    0.552349] hub 3-0:1.0: 2 ports detected
[    0.553301] usbcore: registered new interface driver usb-storage
[    0.553955] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.556563] i8042: Detected active multiplexing controller, rev 1.1
[    0.559170] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.559568] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.559965] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.560407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.560808] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.561255] hv_vmbus: registering driver hyperv_keyboard
[    0.561774] rtc_cmos 00:03: RTC can wake from S4
[    0.562370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.562869] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.564393] sdhci: Secure Digital Host Controller Interface driver
[    0.564865] sdhci: Copyright(c) Pierre Ossman
[    0.566006] hidraw: raw HID events driver (C) Jiri Kosina
[    0.566486] hv_vmbus: registering driver hid_hyperv
[    0.566915] usbcore: registered new interface driver usbhid
[    0.567337] usbhid: USB HID core driver
[    0.567684] hv_utils: Registering HyperV Utility Driver
[    0.568088] hv_vmbus: registering driver hv_util
[    0.568454] hv_vmbus: registering driver hv_balloon
[    0.569382] NET: Registered protocol family 10
[    0.570351] Segment Routing with IPv6
[    0.570715] NET: Registered protocol family 17
[    0.571097] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.571999] 8021q: 802.1Q VLAN Support v1.8
[    0.572509] NET: Registered protocol family 40
[    0.573685] microcode: sig=0x30661, pf=0x8, revision=0x10c
[    0.574234] microcode: Microcode Update Driver: v2.2.
[    0.574273] sched_clock: Marking stable (573441123, 0)->(657968060, -84526937)
[    0.575503] registered taskstats version 1
[    0.576740] rtc_cmos 00:03: setting system clock to 2018-09-07 16:15:12 UTC (1536336912)
[    0.584900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.831528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.834278] ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
[    0.834837] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.837583] ata1.00: configured for UDMA/133
[    0.838642] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5
[    0.841240] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.841885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.842433] sd 0:0:0:0: [sda] Write Protect is off
[    0.842862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.843052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.877982]  sda: sda1 sda2
[    0.880409] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.171549] ata2: SATA link down (SStatus 0 SControl 300)
[    1.186977] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[    1.194364] Freeing unused kernel memory: 1052K
[    1.230632] Write protecting the kernel read-only data: 12288k
[    1.235448] Freeing unused kernel memory: 2024K
[    1.252890] Freeing unused kernel memory: 736K
[    1.487895] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[    1.488460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[    1.566812] init: Console is alive
[    1.796421] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    1.821964] pps_core: LinuxPPS API ver. 1 registered
[    1.822364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.823647] PTP clock support registered
[    1.824343] Button Hotplug driver version 0.4.1
[    1.824818] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    1.830753] init: - preinit -
[    1.890124] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.267747] random: jshn: uninitialized urandom read (4 bytes read)
[    2.309827] random: jshn: uninitialized urandom read (4 bytes read)
[    2.316834] random: jshn: uninitialized urandom read (4 bytes read)
[    2.470351] usb 1-7: new high-speed USB device number 4 using ehci-pci
[    2.490506] clocksource: Switched to clocksource tsc
[    2.691721] usb-storage 1-7:1.0: USB Mass Storage device detected
[    2.692832] scsi host4: usb-storage 1-7:1.0
[    3.754161] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.765748] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.433172] urandom_read: 5 callbacks suppressed
[    5.433177] random: jshn: uninitialized urandom read (4 bytes read)
[    5.722679] F2FS-fs (loop0): Mounted with checkpoint version = 1a030d9d
[    5.751832] mount_root: switching to f2fs overlay
[    5.833723] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    5.839672] urandom-seed: Seeding with /etc/urandom.seed
[    5.914891] procd: - early -
[    6.557234] procd: - ubus -
[    6.596946] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.610617] procd: - init -
[    6.950178] kmodloader: loading kernel modules from /etc/modules.d/*
[    6.954303] tun: Universal TUN/TAP device driver, 1.6
[    6.958028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.958547] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.961325] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    6.961834] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.964069] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.426558] Netfilter messages via NETLINK v0.30.
[    7.428839] ip_set: protocol 6
[    7.450984] i2c /dev entries driver
[    7.487885] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    7.488578] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    7.492106] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.492562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.494282] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.898600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.147745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.149259] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000000b000, e8:40:f2:3f:a9:58, XID 00a00000 IRQ 30
[    8.154185] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[    8.155901] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    8.174092] xt_time: kernel timezone is -0000
[    8.411155] Intel(R) Wireless WiFi driver for Linux
[    8.411610] Copyright(c) 2003- 2015 Intel Corporation
[    8.445655] PPP generic driver version 2.4.2
[    8.447497] NET: Registered protocol family 24
[    8.454488] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    8.455168] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUG disabled
[    8.455610] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
[    8.456054] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
[    8.456529] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[    8.501089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.504079] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.792405] r8169 0000:03:00.0 eth0: link down
[   11.792453] r8169 0000:03:00.0 eth0: link down
[   11.903937] random: fast init done
[   13.415479] r8169 0000:03:00.0 eth0: link up
[   30.131354] random: crng init done
21.12.20192690Base systemBug ReportMediumMediumImagebuilder: "opkg_install_pkg: Package size mismatch"...AllNew Task Description

The Imagebuilder fails in the following situation:

  • download and unpack the imagebuilder
  • build an image: it works
  • wait a few days/weeks
  • try to build an image again with the same imagebuilder: it fails

It fails quite late during building with lots of errors like this:

   opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   opkg_install_cmd: Cannot install package luci.
   opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   opkg_install_cmd: Cannot install package base-files.
   opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   opkg_install_cmd: Cannot install package busybox.

This happens with stable releases (18.06.5), RC releases (19.07.0-rc2), and with several targets.

It looks like package sizes are somehow kept in a local cache during the first build, and are not updated when building again a few days later. This is strange because the imagebuilder seems to fetch new versions of the Packages.gz files.

Below is the full log.

  $ make image PROFILE=rb-nor-flash-16M"" BIN_DIR="${IMAGEBUILDER_DIR}" EXTRA_IMAGE_NAME="rzn" FILES="files/" PACKAGES="luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr -ppp -ppp-mod-pppoe -kmod-ppp -kmod-pppoe -kmod-pppox"
  
  Building images for ar71xx - MikroTik RouterBoard (16 MB SPI NOR)
  Packages: luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr base-files busybox dnsmasq dropbear firewall fstools ip6tables iptables kernel kmod-ath9k kmod-gpio-button-hotplug kmod-ledtrig-gpio libc libgcc logd mtd netifd odhcp6c odhcpd-ipv6only opkg rbcfg rssileds swconfig uboot-envtools uci uclient-fetch wpad-mini
  
  Downloading http://downloads.openwrt.org/releases/18.06.5/targets/ar71xx/mikrotik/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_core
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/base/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_base
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_luci
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_packages
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/routing/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_routing
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/telephony/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_telephony
  Downloading file:packages/Packages
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/imagebuilder
  
  Installing packages...
  Installing libc (1.1.19-2) to root...
  Installing libgcc (7.3.0-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libgcc_7.3.0-2_mips_24kc.ipk.
  Configuring libgcc.
  Configuring libc.
  Installing kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) to root...
  Configuring kernel.
  Installing luci (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci_git-19.353.67991-868abc1-1_all.ipk
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libubox_2018-07-25-c83a84af-2_mips_24kc.ipk.
  Installing luci-mod-admin-full (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-mod-admin-full_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-en (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-en_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-base (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-base_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-i18n-firewall-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-firewall-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-app-firewall (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-app-firewall_git-19.353.67991-868abc1-1_all.ipk
  Installing base-files (194.2-r7897-9d401013fc) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/base-files_194.2-r7897-9d401013fc_mips_24kc.ipk.
  Installing libuci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libuci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing busybox (1.28.4-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/busybox_1.28.4-3_mips_24kc.ipk.
  Installing dnsmasq (2.80-1.4) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dnsmasq_2.80-1.4_mips_24kc.ipk.
  Installing dropbear (2017.75-7.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dropbear_2017.75-7.1_mips_24kc.ipk.
  Installing firewall (2018-08-13-1c4d5bcd-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/firewall_2018-08-13-1c4d5bcd-1_mips_24kc.ipk.
  Installing fstools (2019-03-28-ff1ded63-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/fstools_2019-03-28-ff1ded63-5_mips_24kc.ipk.
  Installing ip6tables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/ip6tables_1.6.2-3_mips_24kc.ipk.
  Installing kmod-nf-reject6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-reject6_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt6_4.9.198-1_mips_24kc.ipk
  Installing kmod-ipt-core (4.9.198-1) to root...
  Downloading file:packages/kmod-ipt-core_4.9.198-1_mips_24kc.ipk
  Installing kmod-ip6tables (4.9.198-1) to root...
  Downloading file:packages/kmod-ip6tables_4.9.198-1_mips_24kc.ipk
  Installing libip4tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip4tc_1.6.2-3_mips_24kc.ipk.
  Installing libip6tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip6tc_1.6.2-3_mips_24kc.ipk.
  Installing libxtables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libxtables_1.6.2-3_mips_24kc.ipk.
  Installing iptables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/iptables_1.6.2-3_mips_24kc.ipk.
  Package iptables (1.6.2-3) installed in root is up to date.
  Package kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) installed in root is up to date.
  Installing kmod-ath9k (4.9.198+2017-11-01-10) to root...
  Downloading file:packages/kmod-ath9k_4.9.198%2b2017-11-01-10_mips_24kc.ipk
  Installing libnl-tiny (0.1-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libnl-tiny_0.1-5_mips_24kc.ipk.
  Installing kmod-gpio-button-hotplug (4.9.198-2) to root...
  Downloading file:packages/kmod-gpio-button-hotplug_4.9.198-2_mips_24kc.ipk
  Installing kmod-ledtrig-gpio (4.9.198-1) to root...
  Downloading file:packages/kmod-ledtrig-gpio_4.9.198-1_mips_24kc.ipk
  Package libc (1.1.19-2) installed in root is up to date.
  Package libgcc (7.3.0-2) installed in root is up to date.
  Installing logd (2018-02-14-128bc35f-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/logd_2018-02-14-128bc35f-2_mips_24kc.ipk.
  Installing mtd (23) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/mtd_23_mips_24kc.ipk.
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Installing netifd (2019-01-31-a2aba5c7-2.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/netifd_2019-01-31-a2aba5c7-2.1_mips_24kc.ipk.
  Installing odhcp6c (2018-07-14-67ae6a71-15) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcp6c_2018-07-14-67ae6a71-15_mips_24kc.ipk.
  Installing odhcpd-ipv6only (1.15-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcpd-ipv6only_1.15-3_mips_24kc.ipk.
  Installing opkg (2019-06-14-dcbc142e-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/opkg_2019-06-14-dcbc142e-1_mips_24kc.ipk.
  Installing rbcfg (2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rbcfg_2_mips_24kc.ipk.
  Installing rssileds (0.2-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rssileds_0.2-1_mips_24kc.ipk.
  Installing swconfig (11) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/swconfig_11_mips_24kc.ipk.
  Installing uboot-envtools (2018.03-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uboot-envtools_2018.03-1_mips_24kc.ipk.
  Installing uci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing uclient-fetch (2018-11-24-3ba74ebc-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uclient-fetch_2018-11-24-3ba74ebc-1_mips_24kc.ipk.
  Installing wpad-mini (2018-05-21-62566bc2-8) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/wpad-mini_2018-05-21-62566bc2-8_mips_24kc.ipk.
  Configuring kmod-nf-reject6.
  Configuring uboot-envtools.
  Configuring kmod-ledtrig-gpio.
  Configuring rbcfg.
  Configuring luci-app-firewall.
  Configuring kmod-nf-ipt.
  Configuring libxtables.
  Configuring libip4tc.
  Configuring kmod-nf-ipt6.
  Configuring kmod-ipt-core.
  Configuring kmod-ip6tables.
  Configuring fstools.
  Configuring libip6tc.
  Configuring luci-base.
  Configuring luci-mod-admin-full.
  Configuring kmod-gpio-button-hotplug.
  Configuring luci-i18n-firewall-fr.
  Configuring iptables.
  Configuring ip6tables.
  Configuring luci-i18n-base-en.
  Configuring luci-i18n-base-fr.
  Collected errors:
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package luci.
   * opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   * opkg_install_cmd: Cannot install package base-files.
   * opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   * opkg_install_cmd: Cannot install package busybox.
   * opkg_install_pkg: Package size mismatch: dnsmasq is 99783 bytes, expecting 99775 bytes
   * opkg_install_cmd: Cannot install package dnsmasq.
   * opkg_install_pkg: Package size mismatch: dropbear is 86613 bytes, expecting 86610 bytes
   * opkg_install_cmd: Cannot install package dropbear.
   * opkg_install_pkg: Package size mismatch: firewall is 40776 bytes, expecting 40777 bytes
   * opkg_install_cmd: Cannot install package firewall.
   * opkg_install_pkg: Package size mismatch: libnl-tiny is 12953 bytes, expecting 12948 bytes
   * opkg_install_cmd: Cannot install package kmod-ath9k.
   * opkg_install_pkg: Package size mismatch: logd is 10114 bytes, expecting 10111 bytes
   * opkg_install_cmd: Cannot install package logd.
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package mtd.
   * opkg_install_pkg: Package size mismatch: netifd is 62005 bytes, expecting 62004 bytes
   * opkg_install_cmd: Cannot install package netifd.
   * opkg_install_pkg: Package size mismatch: odhcp6c is 23650 bytes, expecting 23646 bytes
   * opkg_install_cmd: Cannot install package odhcp6c.
   * opkg_install_pkg: Package size mismatch: odhcpd-ipv6only is 28830 bytes, expecting 28845 bytes
   * opkg_install_cmd: Cannot install package odhcpd-ipv6only.
   * opkg_install_pkg: Package size mismatch: opkg is 58890 bytes, expecting 58895 bytes
   * opkg_install_cmd: Cannot install package opkg.
   * opkg_install_pkg: Package size mismatch: rssileds is 4056 bytes, expecting 4059 bytes
   * opkg_install_cmd: Cannot install package rssileds.
   * opkg_install_pkg: Package size mismatch: swconfig is 9478 bytes, expecting 9484 bytes
   * opkg_install_cmd: Cannot install package swconfig.
   * opkg_install_pkg: Package size mismatch: uci is 7267 bytes, expecting 7262 bytes
   * opkg_install_cmd: Cannot install package uci.
   * opkg_install_pkg: Package size mismatch: uclient-fetch is 7489 bytes, expecting 7485 bytes
   * opkg_install_cmd: Cannot install package uclient-fetch.
   * opkg_install_pkg: Package size mismatch: wpad-mini is 258733 bytes, expecting 258725 bytes
   * opkg_install_cmd: Cannot install package wpad-mini.
  make[2]: *** [Makefile:153: package_install] Error 255
  make[1]: *** [Makefile:114: _call_image] Error 2
  make: *** [Makefile:193: image] Error 2
09.10.20192541KernelBug ReportMediumLowHardware offloading causes some flows to fail to be NAT...openwrt-19.07New Task Description

Just after a reboot, some flows are not NATed: packets from a machine in the LAN are sent to the WAN port with a private source IP address.

This is on a Linksys RE6500 (ramips mt7621) running openwrt 19.07-SNAPSHOT r10578-b3d70f628.
It is configured with flow_offloading and flow_offloading_hw.

Here is a tcpdump capture showing the problem on the WAN port (172.23.184.0/24 is my LAN address space):

root@openwrt:~# tcpdump -n -i eth0.20 net 172.23.184.0/24
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0.20, link-type EN10MB (Ethernet), capture size 262144 bytes
18:51:21.756552 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 112
18:51:22.651556 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148
18:51:26.681032 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 768
18:51:27.771654 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148

Here is what conntrack -L says:

udp      17 55 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=93 bytes=20412 [UNREPLIED] src=91.224.XX.YY dst=172.23.184.119 sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Notice the second dst= that shows the private IP address of the LAN machine.

After restarting the firewall, the flow is correctly NAT-ed and conntrack -L shows the correct entry (193.33.ZZ.WW is my public IP address):

udp      17 175 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=4 bytes=704 [UNREPLIED] src=91.224.XX.YY dst=193.33.ZZ.WW sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Note: when I only enable flow_offloading, the issue does not appear anymore, so this really seems to be an issue with the hw offloading integration in the firewall.

17.03.2017634Base systemBug ReportMediumMediumFactory flashing fails because LEDE filename is too lon...AllNew Task Description

On a TP-Link TL-WR841N v11, flashing LEDE from the web interface of the stock firmware is not possible.

This is caused by a stupid check that refuses filename longer than 64 chars in the web interface. The check is implemented in javascript and returns a cryptic error message like “Please select a file to upload”, as if no file was selected.

The current naming scheme is quite long:

$ echo ‘lede-17.01.0-r3205-59508e3-ar71xx-generic-tl-wr841-v11-squashfs-factory-eu.bin’ | wc -c
79

Shortening the name like the following would decrease the length below 64 chars, and leave some space for a custom suffix (e.g. using EXTRA_IMAGE_NAME in the Imagebuilder):

$ echo ‘lede-17.01.0-ar71xx-tlwr841v11-squashfs-factory-eu.bin’ | wc -c
55

17.08.201697Base systemBug ReportMediumLowdnsmasq doesn't receive updated dns servers when runnin...TrunkNew Task Description

Bind-mounting /tmp/resolv.conf.auto apparently doesn’t forward inotify events arriving from the kernel when resolv.conf.auto was changed (e.g. upstream DNS servers were received by a DHCP client or pppd). Restarting dnsmasq or running it without ujail solves the issue.

10.07.20203221PackagesBug ReportLowLowubox: validate.c: Link-Local IPv6 with interface ID not...AllNew Task Description

validate.c uses inet_pton for identifying IPv6 addresses [1], and this seems to not understand interface identifiers as used for Link-local IPv6 addresses.

Reproduce:

root@FFF-GW-Adrian:~# /sbin/validate_data host fdff::1
host - fdff::1 = true
root@FFF-GW-Adrian:~# /sbin/validate_data host fe80::1
host - fe80::1 = true
root@FFF-GW-Adrian:~# /sbin/validate_data host fe80::1%br-mesh
host - fe80::1%br-mesh = false

This is a problem practically whenever validata_data is used to check uci values.

For example, it is not possible to use a link-local address for specifying an NTP server:

https://github.com/openwrt/openwrt/blob/master/package/utils/busybox/files/sysntpd#L33

If ‘server:list(host)’ is changed to ‘server:list(string)’ there, it obviously works fine, as it’s just the validation.

[1] https://git.openwrt.org/?p=project/ubox.git;a=blob;f=validate/validate.c;h=e72b8117ecd8b680778b0f5c7637ed6546a7736b;hb=HEAD#l402

03.09.2017998PackagesBug ReportLowLowpackages: "make packages/X/check" should print warnings...TrunkNew Task Description

Currently, when running “make check” on a single package, it does not print any warning. V=s is needed to see the warnings. The build system should print the warnings in all cases, because that’s what the user asks for!

To reproduce:

$ make package/nlbwmon/check 
 make[1] package/nlbwmon/check
 make[2] -C feeds/packages/net/nlbwmon check
$ make package/nlbwmon/check V=s
make[1]: Entering directory '/tmp/lede'
make[2]: Entering directory '/tmp/lede/feeds/packages/net/nlbwmon'
WARNING: nlbwmon-2017-08-02-32fc0925.tar.xz is missing, please run make download before re-running this check
make[2]: Leaving directory '/tmp/lede/feeds/packages/net/nlbwmon'
make[1]: Leaving directory '/tmp/lede'

The main target make check (without specifying any package) works fine, because it seems to run in verbose mode by default:

$ make check
make[3]: Entering directory '/tmp/lede/tools/gmp'
make[3]: Leaving directory '/tmp/lede/tools/gmp'
...
make[3]: Entering directory '/tmp/lede/package/network/utils/iwinfo'
WARNING: PKG_MIRROR_HASH is missing, set to 7bd294f50f8ec8c0497c5fbe5527f3ae098814cdfeecf4ccf78a2a8937611664
make[3]: Leaving directory '/tmp/lede/package/network/utils/iwinfo'
...

I tried to fix the issue myself but this is way above my understanding of make.

29.01.20202781Base systemBug ReportLowMediumArcher C50 v4 Mac80211 Looses Internet Access after 20’...openwrt-19.07New Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Problem Device:
TP-Link Archer C50 (Canadian) v4 + v4.2

Software version:
openwrt 19.07 r10860, default packages versions.

Steps to reproduce:
Setup wireless like below. I’ve intentionally left encryption set to “none” for both radio’s for quick testing but i’ve tested with WPA2 CCMP encryption with no change in results.

config wifi-device ‘radio0’ option type ‘mac80211’ option channel ‘11’ option hwmode ‘11g’ option path ‘platform/10300000.wmac’ option htmode ‘HT20’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio0’ option device ‘radio0’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

config wifi-device ‘radio1’ option type ‘mac80211’ option hwmode ‘11a’ option path ‘pci0000:00/0000:00:00.0/0000:01:00.0’ option htmode ‘VHT80’ option channel ‘112’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio1’ option device ‘radio1’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

Alternative Settings:

htmode ‘HT40’ No change in results
channel ‘1’, ‘6’, ‘11’ No change in results
disassoc_low_ack ‘0’ No change in results

08.05.20203073KernelBug ReportLowHighAR8337/AR8327 Flow Control Enabled on Archer C7 v5 (and...TrunkUnconfirmed Task Description

I have a TP-Link Archer C7 v5 (ath79/generic) running OpenWrt 19.07.2 r10947-65030d81f3 and periodically one of my hosts sends out a long-running flood (10/sec) of MPCP Pause frames. The AR8337 switch is configured to honor these frames on port 0 (CPU), and other ports, so stops switching frames essentially forever.

There is no way exposed to user to disable flow control.

Flow control should be turned off unless explicitly requested by the user (e.g., they are in a Datacenter/Enterprise environment and/or doing Fibre Channel over Ethernet). This is exactly the opposite of how it currently is with the added benefit that the user cannot change the behavior.

Here’s a tool that will helpfully generate MPCP Pause frames:
https://github.com/nwholloway/mpcp

You can use this to bring down your network indefinitely. Additionally, since the AR8337 switch consumes these frames you will not be able to see them from the OpenWRT host.

18.06.20192328Base systemBug ReportLowMediumAllocate resources to sort out odhcpd/dnsmasq interacti...TrunkNew Task Description

As IPv6 is being adopted, increasingly people are seeing dnsmasq log ‘spam’. See https://bugs.openwrt.org/index.php?do=details&task_id=1492&string=1492&search_name=&type%5B0%5D=&sev%5B0%5D=&pri%5B0%5D=&due%5B0%5D=&reported%5B0%5D=&cat%5B0%5D=&status%5B0%5D=open&percent%5B0%5D=&opened=&dev=&closed=&duedatefrom=&duedateto=&changedfrom=&changedto=&openedfrom=&openedto=&closedfrom=&closedto=

By default under openwrt, dhcpv4 leases are handled by dnsmasq whilst dhcpv6/RA is handled by openwrt’s odhcpd.

odhcpd could handle both v4 & v6 but does not yet have the same configuration flexibility for dhcp options as dnsmasq. I guess this is why no one has been brave enough to switch to odhcpd for ipv4 operations as well as ipv6.

dnsmasq can also handle dhcpv6/RA but not quite as flexibly as odhcpd. dnsmasq will automatically find IP6 prefixes on interfaces and start handling them, whilst openwrt’s strategy with odhcpd is to only handle stuff we tell you to handle, don’t do it automagically.

As dnsmasq is the default resolver for openwrt and the wider LAN, it needs to know about DHCP/hostname allocations. For DHCPv4 this is easy, dnsmasq is controlling them. For DHCPv6 a hosts file (called a statefile in the odhcpd code) is handed to dnsmasq.

By default this host file is not read dynamically, so odhcpd has to signal dnsmasq to re-read the host file (and clear caches etc etc) upon every ipv6 lease change.

This generates a lot of log spam and process startup overhead. There are also questions about service operability during this time.

Effort needs to be put into sorting this out.

Temporary workarounds:

Use ‘hostsdir’ dnsmasq option instead of ‘addn-hosts’ - dnsmasq will dynamically scan changes/additions to hosts in hostsdir whereas addn-hosts needs a SIGHUP. Host deletions cannot be handled by this method, so odhcpd would still need to SIGHUP on lease expiry. It might reduce some of the spam.

Longer term:

Teach dnsmasq to accept hostname updates over an IPC mechanism. ubus? and carry on using odhcpd for ipv6.

Teach dnsmasq to handle ipv6 prefix additions/deletions/handling via an IPC mechanism in the same way as odhcpd. Drop odhcpd and use dnsmasq for everything.

Use odhcpd for everything and use another dns resolver that interfaces nicely with odhcpd.

Why don’t I see this problem: I use dnsmasq to handle ipv6 but I’m lucky enough that this works for me.

This needs fixing/funding to sort it out though.

06.04.20192226Base systemBug ReportVery LowHighzyxel P-2812HNU-F1 initramfs has been broken with LZMA:...AllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

zyxel P-2812HNU-F1

- Software versions of OpenWrt/LEDE release, packages, etc.

since r47026 up to the latest trunk

- Steps to reproduce
boot with serial connection stop autoboot, load initramfs, boot from ram get error

- Reason it is important

initramfs is needed for a first install.

- Posible solution
include/configs/p2812hnufx.h
probably needs:
#define CONFIG_SYS_BOOTM_LEN 0×1000000 /* 16 MB */

like in this commit for a similar modem
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=ea12a80276c0aca680d67515e7f651e2cef3f3ee

- error logs
“recent” trunk snapshot(I threw away the last compiled version for it still gave the same error)

ROM VER: 1.0.5
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt5 (Nov 18 2014 - 19:54:01)
SPL: initializing NAND flash
SPL: checking U-Boot image
SPL: loading U-Boot to RAM
SPL: decompressing U-Boot with LZO
SPL: jumping to U-Boot


U-Boot 2013.10-openwrt5 (Nov 18 2014 - 19:54:01) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NAND
DRAM:  128 MiB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0
P-2812HNU-Fx # tftpboot openwrt-lantiq-xrx200-zyxel_p-2812hnu-f1-initramfs-kernel.bin
ltq_phy: addr 0, link 1, speed 1000, duplex 1
ltq_phy: addr 1, link 0, speed 10, duplex 0
ltq_phy: addr 17, link 0, speed 10, duplex 0
ltq_phy: addr 19, link 0, speed 10, duplex 0
ltq_phy: addr 5, link 0, speed 10, duplex 0
Using ltq-eth device
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'openwrt-lantiq-xrx200-zyxel_p-2812hnu-f1-initramfs-kernel.bin'.
Load address: 0x81000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ######################################
done
Bytes transferred = 6183929 (5e5bf9 hex)
P-2812HNU-Fx # bootm $fileaddr
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   MIPS OpenWrt Linux-4.14.103
   Created:      2019-02-27  11:12:48 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    6183865 Bytes = 5.9 MiB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... LZMA: uncompress or overwrite error 7 - must RESET b
ROM VER: 1.0.5
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt5 (Nov 18 2014 - 19:54:01)

last known working version

ROM VER: 1.0.5
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt5 (Nov 18 2014 - 19:54:01)
SPL: initializing NAND flash
SPL: checking U-Boot image
SPL: loading U-Boot to RAM
SPL: decompressing U-Boot with LZO
SPL: jumping to U-Boot


U-Boot 2013.10-openwrt5 (Nov 18 2014 - 19:54:01) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NAND
DRAM:  128 MiB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0
P-2812HNU-Fx # tftpboot openwrt-lantiq-xrx200-P2812HNUF1-uImage-initramfs
ltq_phy: addr 0, link 0, speed 10, duplex 0
ltq_phy: addr 1, link 0, speed 10, duplex 0
ltq_phy: addr 17, link 0, speed 10, duplex 0
ltq_phy: addr 19, link 0, speed 10, duplex 0
ltq_phy: addr 5, link 0, speed 10, duplex 0
Using ltq-eth device
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'openwrt-lantiq-xrx200-P2812HNUF1-uImage-initramfs'.
Load address: 0x81000000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
ltq_phy: addr 0, link 1, speed 1000, duplex 1
ltq_phy: addr 1, link 0, speed 10, duplex 0
ltq_phy: addr 17, link 0, speed 10, duplex 0
ltq_phy: addr 19, link 0, speed 10, duplex 0
ltq_phy: addr 5, link 0, speed 10, duplex 0
Using ltq-eth device
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'openwrt-lantiq-xrx200-P2812HNUF1-uImage-initramfs'.
Load address: 0x81000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ##########
         1.6 MiB/s
done
Bytes transferred = 4707233 (47d3a1 hex)
P-2812HNU-Fx # bootm $fileaddr
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   MIPS OpenWrt Linux-3.18.11
   Created:      2015-04-25   1:54:58 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    4707169 Bytes = 4.5 MiB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.18.11 (sylwek@WRT) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r44945) ) #2 Sat Apr 25 03:54:35 CEST 2015
[    0.000000] SoC: VR9 rev 1.1
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019555 (MIPS 34Kc)
[    0.000000] MIPS: machine is P2812HNUF1 - ZyXEL P-2812HNU-F1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00021000
[    0.000000] Readback ErrCtl register=00021000
[    0.000000] Memory: 121772K/131072K available (3506K kernel code, 149K rwdata, 1036K rodata, 3160K init, 206K bss, 9300K reserved)
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 500MHz
[    0.000000] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[    0.032000] pid_max: default: 32768 minimum: 301
[    0.036000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.044000] pinctrl core: initialized pinctrl subsystem
[    0.048000] NET: Registered protocol family 16
[    0.056000] pinctrl-xway 1e100b10.pinmux: Init done
[    0.060000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[    0.164000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[    0.168000] PCI host bridge /fpi@10000000/pci@E105400 ranges:
[    0.172000]  MEM 0x0000000018000000..0x0000000019ffffff
[    0.176000]   IO 0x000000001ae00000..0x000000001affffff
[    0.188000] gpio-stp-xway 1e100bb0.stp: Init done
[    0.192000] usbcore: registered new interface driver usbfs
[    0.196000] usbcore: registered new interface driver hub
[    0.200000] usbcore: registered new device driver usb
[    0.204000] PCI host bridge to bus 0000:00
[    0.208000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
[    0.212000] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    0.216000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.220000] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[    0.224000] Switched to clocksource MIPS
[    0.228000] NET: Registered protocol family 2
[    0.232000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.240000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.248000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.252000] TCP: reno registered
[    0.256000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.260000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.268000] NET: Registered protocol family 1
[    5.124000] gptu: totally 6 16-bit timers/counters
[    5.132000] gptu: misc_register on minor 63
[    5.136000] gptu: succeeded to request irq 126
[    5.140000] gptu: succeeded to request irq 127
[    5.144000] gptu: succeeded to request irq 128
[    5.148000] gptu: succeeded to request irq 129
[    5.152000] gptu: succeeded to request irq 130
[    5.156000] gptu: succeeded to request irq 131
[    5.164000] ralink,eeprom ralink_eep: using RT3062.eeprom as eeprom
[    5.168000] phy-xrx200 gphy-xrx200: requesting lantiq/vr9_phy11g_a1x.bin
[    5.176000] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 6A60000
[    5.184000] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 6A60000
[    5.288000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    5.296000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.304000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.312000] msgmni has been set to 237
[    5.316000] io scheduler noop registered
[    5.320000] io scheduler deadline registered (default)
[    5.328000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[    5.336000] console [ttyLTQ0] enabled
[    5.336000] console [ttyLTQ0] enabled
[    5.344000] bootconsole [early0] disabled
[    5.344000] bootconsole [early0] disabled
[    5.352000] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[    5.352000] nand: Samsung NAND 128MiB 3,3V 8-bit
[    5.352000] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[    5.368000] Scanning device for bad blocks
[    5.424000] Bad eraseblock 591 at 0x0000049e0000
[    5.428000] Bad eraseblock 616 at 0x000004d00000
[    5.464000] 4 ofpart partitions found on MTD device 10000000.nand-parts
[    5.468000] Creating 4 MTD partitions on "10000000.nand-parts":
[    5.476000] 0x000000000000-0x000000040000 : "uboot"
[    5.480000] 0x000000040000-0x000000060000 : "uboot-env"
[    5.488000] 0x000000060000-0x000000260000 : "kernel"
[    5.492000] 0x000000260000-0x000008000000 : "ubi"
[    5.600000] libphy: lantiq,xrx200-mdio: probed
[    5.620000] net-xrx200: invalid MAC, using random
[    5.688000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:00, irq=-1)
[    5.756000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:01, irq=-1)
[    5.824000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
[    5.892000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
[    5.960000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:05, irq=-1)
[    5.968000] wdt 1f8803f0.watchdog: Init done
[    5.972000] TCP: cubic registered
[    5.976000] NET: Registered protocol family 17
[    5.980000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    5.992000] Bridge firewalling registered
[    5.996000] 8021q: 802.1Q VLAN Support v1.8
[    6.004000] UBI error: ubi_auto_attach: no valid UBI magic found [    6.016000] Freeing unused kernel memory: 3160K (8049a000 - 807b0000)
[    6.036000] init: failed to symlink /tmp -> /var
[    6.040000] init: Console is alive
[    6.048000] init: - watchdog -
[    6.076000] dwc2 1e101000.ifxhcd: requested GPIO 489
[    6.936000] dwc2 1e101000.ifxhcd: DWC OTG Controller
[    6.936000] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
[    6.944000] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[    6.952000] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
[    6.952000] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
[    6.964000] hub 1-0:1.0: USB hub found
[    6.968000] hub 1-0:1.0: 1 port detected
[    7.832000] dwc2 1e106000.ifxhcd: DWC OTG Controller
[    7.832000] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
[    7.840000] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
[    7.848000] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
[    7.848000] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
[    7.860000] hub 2-0:1.0: USB hub found
[    7.864000] hub 2-0:1.0: 1 port detected
[    8.048000] init: - preinit -
[    8.160000] random: procd urandom read with 31 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    9.688000] eth0: port 0 got link
[   11.280000] procd: - early -
[   11.280000] procd: - watchdog -
[   11.852000] procd: - ubus -
[   12.864000] procd: - init -
Please press Enter to activate this console.
[   13.884000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH

[   13.908000] NET: Registered protocol family 10
[   13.916000] NET: Registered protocol family 8
[   13.920000] NET: Registered protocol family 20
[   13.932000] PPP generic driver version 2.4.2
[   13.940000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   13.964000] MEI CPE Driver, Version 1.2.0

[   13.964000] (c) Copyright 2009, Infineon Technologies AG
### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###


Lantiq CPE API Driver version: DSL CPE API V4.11.4
[   13.988000]
[   13.988000] Predefined debug level: 2
[   14.000000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
[   14.004000] Backport generated by backports.git backports-20150129-0-gdd4a670
[   14.016000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.028000] Infineon Technologies DEU driver version 2.0.0
[   14.032000] IFX DEU DES initialized (multiblock).
[   14.036000] IFX DEU AES initialized (multiblock).
[   14.040000] IFX DEU ARC4 initialized (multiblock).
[   14.044000] IFX DEU SHA1 initialized.
[   14.048000] IFX DEU MD5 initialized.
[   14.052000] IFX DEU SHA1_HMAC initialized.
[   14.056000] IFX DEU MD5_HMAC initialized.
[   14.068000] nf_conntrack version 0.5.0 (1952 buckets, 7808 max)
[   14.092000] NET: Registered protocol family 24
[   14.116000] xt_time: kernel timezone is -0000
[   14.140000] cfg80211: Calling CRDA to update world regulatory domain
[   14.164000] cfg80211: World regulatory domain updated:
[   14.168000] cfg80211:  DFS Master region: unset
[   14.172000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   14.180000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   14.188000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   14.196000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   14.204000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   14.212000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   14.220000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   14.232000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   14.240000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   14.328000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[   14.332000] rt2800pci 0000:00:0e.0: failed to load eeprom property
[   14.336000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
[   14.348000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected
[   14.356000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected
ioctl ATM_SETESI: No such device
[   20.824000] PTM 1.0.27    PTM (E1) firmware version 0.30
[   20.828000] ifxmips_ptm: PTM init succeed
[   22.760000] device eth0.1 entered promiscuous mode
[   22.764000] device eth0 entered promiscuous mode
[   22.776000] br-lan: port 1(eth0.1) entered forwarding state
[   22.780000] br-lan: port 1(eth0.1) entered forwarding state
[   24.784000] br-lan: port 1(eth0.1) entered forwarding state
[   31.808000] random: nonblocking pool is initialized



BusyBox v1.23.2 (2015-04-25 03:40:56 CEST) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 CHAOS CALMER (Bleeding Edge, r45578)
 -----------------------------------------------------
  * 1 1/2 oz Gin            Shake with a glassful
  * 1/4 oz Triple Sec       of broken ice and pour
  * 3/4 oz Lime Juice       unstrained into a goblet.
  * 1 1/2 oz Orange Juice
  * 1 tsp. Grenadine Syrup
 -----------------------------------------------------
root@OpenWrt:/#
09.08.20213971Base systemBug ReportVery LowCriticalZyxel nbg-419v2 bootloopopenwrt-21.02Unconfirmed Task Description

after upgrading my zyxel nbg-419v2 to 2021.02RC4 i noticed a bootloop

when connecting the serial cable it turned out to be a kernel unpacking issue:

raspi_read: from:50000 len:40 
.   Image Name:   MIPS OpenWrt Linux-5.4.137
   Created:      2021-07-31  17:21:01 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1496161 Bytes =  1.4 MB
   Load Address: 80000000
   Entry Point:  80000000
raspi_read: from:50040 len:16d461 
.......................   Verifying Checksum ... OK
   Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover


U-Boot 1.1.3 (Jun  9 2012 - 07:23:11)

Board: Ralink APSoC DRAM:  64 MB
relocate_code Pointer at: 83fac000
******************************
Software System Reset Occurred
******************************
spi_wait_nsec: 3c 
spi device id: c2 20 17 c2 20 (2017c220)
find flash: MX25L6405D

once i managed flashing 19.07.08 via tftp it works again as expected.

unfortunately the wiki was more misleading than helping, especally the magic number is wrong, it seems the right one is already in the normal images, so changing makes things worse.

06.09.20203324Base systemBug ReportVery LowMediumZyxel EMG2926-Q10A (aka NBG6716) requires changes in tr...TrunkUnconfirmed Task Description

459c8c9ef816156107e297964d088ddee2b4eef5 added support for the Zyxel NBG6716 device. Unfortunately, I believe it made an error in the partition layout. Because the RAS image header is written to flash, the offsets for sub-partitions of firmware must be shifted down by the size of this header (i.e., 128KiB):

diff --git a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts                                            
index 90328078dd..148a6ea2d1 100644
--- a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
+++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
@@ -148,14 +148,19 @@
                        reg = <0x500000 0x7b00000>;
                };

-               partition@500000 {
+               // There's a RAS image header inside the firmware partition,
+               // taking up one erase block (128KiB), so the kernel and ubi
+               // partitions are shifted by that amount.
+
+               partition@520000 {
+                       // JFFS2 containing the compressed kernel
                        label = "kernel";
-                       reg = <0x500000 0x400000>;
+                       reg = <0x520000 0x400000>;
                };

-               partition@900000 {
+               partition@920000 {
                        label = "ubi";
-                       reg = <0x900000 0x7700000>;
+                       reg = <0x920000 0x76C0000>;
                };
        };
 };

Without this change, the bootloader finds the kernel inside its JFFS2 partition just fine, but then the kernel dies when it cannot find the UBI header at the indicated offset.

It is not clear to me whether this change should be applied to all NBG6716-equivalent devices or merely the one I have in hand.

Speaking of, that device calls itself a AAVK-EMG2926Q10A in its RAS header and refuses to flash anything not so labeled. Therefore, I have added a target for it by lightly extending the existing one:

diff --git a/target/linux/ath79/dts/qca9558_zyxel_aavk-emg2926q10a.dts b/target/linux/ath79/dts/qca9558_zyxel_aavk-emg2926q10a.dts                          
new file mode 100644
index 0000000000..ec94aa0d73
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_zyxel_aavk-emg2926q10a.dts
@@ -0,0 +1,2 @@
+/* This is just an alias, really */
+#include "qca9558_zyxel_nbg6716.dts"
diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk                                                                            
index ad79c487ad..7336dc45d7 100644
--- a/target/linux/ath79/image/nand.mk
+++ b/target/linux/ath79/image/nand.mk
@@ -263,3 +263,9 @@ define Device/zyxel_nbg6716
   UBINIZE_OPTS := -E 5
 endef
 TARGET_DEVICES += zyxel_nbg6716
+
+define Device/zyxel_aavk-emg2926q10a
+  $(call Device/zyxel_nbg6716)
+  RAS_BOARD := AAVK-EMG2926Q10A
+endef
+TARGET_DEVICES += zyxel_aavk-emg2926q10a

24.10.20203404PackagesBug ReportVery LowMediumzsh: cannot backspace when connected from openssh in tm...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: NETGEAR WNDR4300
- Software versions of OpenWrt/LEDE release, packages, etc.

  • OpenWrt 19.07.4 r11208-ce6496d796
  • zsh - 5.6.2-2

- Steps to reproduce

 1. Start a tmux session on Linux PC
 2. Use ssh to connect to OpenWRT router, where the user uses zsh instead of zsh (i.e. the config in /etc/passwd looks like this `root:x:0:0:root:/root:/usr/bin/zsh`)
 3. Type arbitrary words and delete them by pressing Backspace key

- Expected behavior

 The chars are deleted

- Actual behavior

 A whitespace was appended to the char instead, as if we're typing the space key, but it's deleted internally: when pressing Enter to execute the command, what's been executed is the original command minus the deleted part

Note that I don’t have the issue when:
1. connecting to a normal Linux computer (the user’s shell is zsh ofc)
2. using the default busybox ash
3. executing ssh outside tmux, e.g. a normal Konsole terminal session

25.12.20203534Base systemBug ReportVery LowLowZBT-WE826 (16M) zram-swapopenwrt-19.07Unconfirmed Task Description

I build
openwrt-ramips-mt7620-zbt-we826-16M-squashfs-sysupgrade.bin
from v19.07.5

If I enable
kmod-zram
zram-swap
then /tmp partition creates as zram, but the size of /tmp less then 16M - the sysupgrade.bin image size.

So run

sysupgrade

impossible, and upgrade system via web-GUI impossible too.

Without kmod-zram - all right.

08.01.20202717Base systemBug ReportVery LowMediumYouku YK-L1C (MT7620A): WLAN stops working periodicallyTrunkWaiting on reporter Task Description

Device: Youku YK-L1C
PCB: MTO-WR976N V1.0
Chip: MT7620A ver:2 eco:6
CPU0 revision: 00019650 (MIPS 24KEc)
MIPS: YOUKU YK1

With several OpenWRT versions starting from 2018 (when I bought the router), WLAN periodically stops working after a week or after a month. Wired Ethernet ports remain working. WLAN restart does not help.

Kernel log suggests to file a bug report on rt2x00.serialmonkey.com but the site is not functioning.

The trail of the kernel log:

[ 34.827909] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[ 35.428393] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[ 35.458300] IPv6: ADDRCONF(NETDEV_UP): wlan0-2: link is not ready
[ 36.064758] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-2: link becomes ready
[ 36.097912] IPv6: ADDRCONF(NETDEV_UP): wlan0-3: link is not ready
[ 36.699145] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-3: link becomes ready
[ 49.518071] random: crng init done
[ 4837.370372] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[ 5834.538102] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[ 5834.556560] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[ 5834.574974] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[60224.028009] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[83621.461506] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[83993.491441] mtk_soc_eth 10100000.ethernet eth0: port 1 link up (100Mbps/Full duplex)
[84062.284581] device wlan0 left promiscuous mode
[84062.293643] br-lan: port 2(wlan0) entered disabled state
[84062.621840] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[84063.227188] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[84067.508458] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[84067.575677] br-lan: port 2(wlan0) entered blocking state
[84067.586360] br-lan: port 2(wlan0) entered disabled state
[84067.597335] device wlan0 entered promiscuous mode
[84074.967563] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[84074.980512] br-lan: port 2(wlan0) entered blocking state
[84074.991139] br-lan: port 2(wlan0) entered forwarding state
[84075.018713] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[84076.101273] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[84076.128677] IPv6: ADDRCONF(NETDEV_UP): wlan0-2: link is not ready
[84077.809446] IPv6: ADDRCONF(NETDEV_UP): wlan0-3: link is not ready
[84078.043454] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-2: link becomes ready
[84079.829418] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-3: link becomes ready
[84079.869727] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2
[84079.869727] Please file bug report to http://rt2x00.serialmonkey.com

14.11.20181950KernelBug ReportVery LowCriticalXWAY / BT Home Hub 2B - Wifi Random Disconnects Repeate...AllUnconfirmed Task Description

Very annoying wifi disconnects when connected to WDS-Repeater.
The AP works no disconnects but when connected to repeater random disconnects repeatedly.
Affected firmware release both LEDE 17.X.X and Openwrt 18.X.X

Note: Checked, WDS works fine on Previous Openwrt Releases(BarrierBreaker, ChaosCalmer) on same settings
https://openwrt.org/docs/guide-user/network/wifi/atheroswds

Attaching AP and Repeater Logs:

AP Config:

config wifi-device 'radio0'
	option type 'mac80211'
	option channel '5'
	option hwmode '11ng'
	option path 'pci0000:00/0000:00:0e.0'
	option htmode 'HT20'
	option country 'US'
	option txpower '22'
	option log_level '1'
	option macaddr 'be:b5:1b:b5:70:47'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'MyAP'
	option wds '1'
	option encryption 'psk2+ccmp'
	option key 'password'
	option wmm '1'

Repeater WDS Config:
Network

config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'fdd4:7f11:dd9a::/48'

config interface 'lan'
	option type 'bridge'
	option proto 'dhcp'
	option ifname 'eth1'

config switch
	option name 'switch0'
	option reset '1'
	option enable_vlan '1'

config switch_vlan
	option device 'switch0'
	option vlan '1'
	option vid '1'
	option ports '0 1 2 3 4'

Wireless WDS:

config wifi-device 'radio0'
	option type 'mac80211'
	option channel '5'
	option hwmode '11g'
	option path 'platform/ar934x_wmac'
	option htmode 'HT20'
	option country 'US'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'sta'
	option wds '1'
	option ssid 'MyAP'
	option bssid 'be:b5:1b:b5:70:47'
	option encryption 'psk2+ccmp'
	option key 'password'

config wifi-iface
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'MyAP'
	option encryption 'psk2+ccmp'
	option key 'password'
	option wmm '1'

Repeater WDS Log:

Wed Nov 14 12:26:05 2018 daemon.notice netifd: Network device 'wlan0' link is down
Wed Nov 14 12:26:05 2018 kern.info kernel: [ 5805.077610] br-lan: port 3(wlan0) entered disabled state
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:05 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:06 2018 daemon.notice netifd: Network device 'wlan0-1' link is down
Wed Nov 14 12:26:06 2018 kern.info kernel: [ 5806.068825] br-lan: port 2(wlan0-1) entered disabled state
Wed Nov 14 12:26:07 2018 daemon.notice netifd: bridge 'br-lan' link is down
Wed Nov 14 12:26:07 2018 daemon.notice netifd: Interface 'lan' has link connectivity loss
Wed Nov 14 12:26:07 2018 daemon.notice netifd: lan (1163): udhcpc: received SIGTERM
Wed Nov 14 12:26:07 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.220211] wlan0: authenticate with be:b5:1b:b5:70:47
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.243173] wlan0: send auth to be:b5:1b:b5:70:47 (try 1/3)
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.257141] wlan0: authenticated
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.268771] wlan0: associate with be:b5:1b:b5:70:47 (try 1/3)
Wed Nov 14 12:26:09 2018 daemon.notice netifd: Network device 'wlan0' link is up
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.282394] wlan0: RX AssocResp from be:b5:1b:b5:70:47 (capab=0x431 status=0 aid=5)
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.290756] wlan0: associated
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.309766] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:09 2018 kern.info kernel: [ 5809.315545] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:09 2018 daemon.notice netifd: bridge 'br-lan' link is up
Wed Nov 14 12:26:09 2018 daemon.notice netifd: Interface 'lan' has link connectivity 
Wed Nov 14 12:26:09 2018 daemon.notice netifd: Interface 'lan' is setting up now
Wed Nov 14 12:26:09 2018 daemon.notice hostapd: wlan0-1: AP-STA-DISCONNECTED 00:00:00:00:00:14
Wed Nov 14 12:26:09 2018 daemon.notice netifd: lan (1293): udhcpc: started, v1.25.1
Wed Nov 14 12:26:09 2018 daemon.notice netifd: lan (1293): udhcpc: sending discover
Wed Nov 14 12:26:09 2018 daemon.notice netifd: lan (1293): udhcpc: sending select for 192.168.1.117
Wed Nov 14 12:26:09 2018 daemon.notice netifd: lan (1293): udhcpc: lease of 192.168.1.117 obtained, lease time 43200
Wed Nov 14 12:26:09 2018 daemon.notice netifd: Interface 'lan' is now up
Wed Nov 14 12:26:10 2018 kern.info kernel: [ 5810.201396] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:10 2018 kern.info kernel: [ 5810.207348] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:10 2018 daemon.notice netifd: Network device 'wlan0-1' link is up
Wed Nov 14 12:26:11 2018 kern.info kernel: [ 5811.308642] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:12 2018 kern.info kernel: [ 5812.198553] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:16 2018 daemon.info hostapd: wlan0-1: STA 00:00:00:00:00:14 IEEE 802.11: authenticated
Wed Nov 14 12:26:16 2018 daemon.info hostapd: wlan0-1: STA 00:00:00:00:00:14 IEEE 802.11: associated (aid 1)
Wed Nov 14 12:26:16 2018 daemon.notice hostapd: wlan0-1: AP-STA-CONNECTED 00:00:00:00:00:14
Wed Nov 14 12:26:16 2018 daemon.info hostapd: wlan0-1: STA 00:00:00:00:00:14 WPA: pairwise key handshake completed (RSN)
Wed Nov 14 12:26:25 2018 daemon.notice netifd: Network device 'wlan0' link is down
Wed Nov 14 12:26:25 2018 kern.info kernel: [ 5825.168505] br-lan: port 3(wlan0) entered disabled state
Wed Nov 14 12:26:25 2018 kern.info kernel: [ 5825.949685] wlan0: authenticate with be:b5:1b:b5:70:47
Wed Nov 14 12:26:25 2018 kern.info kernel: [ 5825.972671] wlan0: send auth to be:b5:1b:b5:70:47 (try 1/3)
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice netifd: Network device 'wlan0-1' link is down
Wed Nov 14 12:26:26 2018 kern.info kernel: [ 5826.168126] br-lan: port 2(wlan0-1) entered disabled state
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 kern.info kernel: [ 5826.788061] wlan0: send auth to be:b5:1b:b5:70:47 (try 2/3)
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:26:26 2018 kern.info kernel: [ 5826.988066] wlan0: send auth to be:b5:1b:b5:70:47 (try 3/3)
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.008409] wlan0: authenticated
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.018301] wlan0: associate with be:b5:1b:b5:70:47 (try 1/3)
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.085692] wlan0: RX AssocResp from be:b5:1b:b5:70:47 (capab=0x431 status=0 aid=5)
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.094030] wlan0: associated
Wed Nov 14 12:26:27 2018 daemon.notice netifd: Network device 'wlan0' link is up
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.156807] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.162628] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:27 2018 daemon.notice hostapd: wlan0-1: AP-STA-DISCONNECTED 00:00:00:00:00:14
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.606090] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:27 2018 kern.info kernel: [ 5827.612066] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:26:27 2018 daemon.notice netifd: Network device 'wlan0-1' link is up
Wed Nov 14 12:26:29 2018 kern.info kernel: [ 5829.157978] br-lan: port 3(wlan0) entered forwarding state
Wed Nov 14 12:26:29 2018 kern.info kernel: [ 5829.607947] br-lan: port 2(wlan0-1) entered forwarding state
Wed Nov 14 12:27:02 2018 daemon.notice netifd: Network device 'wlan0' link is down
Wed Nov 14 12:27:02 2018 kern.info kernel: [ 5862.141503] br-lan: port 3(wlan0) entered disabled state
Wed Nov 14 12:27:02 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:27:02 2018 daemon.notice hostapd: handle_probe_req: send failed
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.517323] ------------[ cut here ]------------
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.522138] WARNING: CPU: 0 PID: 980 at compat-wireless-2017-01-31/net/mac80211/ieee80211_i.h:1011 0x80d84e80 [mac80211@80d80000+0x607a0]()
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.535171] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_coWed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.600905] CPU: 0 PID: 980 Comm: hostapd Not tainted 4.4.153 #0
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] Stack : 803938d8 00000000 00000001 803f0000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.607127] 	  ...
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.644169] Call Trace:[<80071c44>] 0x80071c44
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.648814] [<80071c44>] 0x80071c44
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.652426] [<80081ac8>] 0x80081ac8
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.656035] [<80d84e80>] 0x80d84e80 [mac80211@80d80000+0x607a0]
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.662174] [<80081b80>] 0x80081b80
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.665784] [<80118460>] 0x80118460
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.669414] [<80d84e80>] 0x80d84e80 [mac80211@80d80000+0x607a0]
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.675533] [<80118460>] 0x80118460
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.679174] [<80d9f1cc>] 0x80d9f1cc [mac80211@80d80000+0x607a0]
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.685292] [<80118460>] 0x80118460
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.688933] [<80cda8bc>] 0x80cda8bc [cfg80211@80cc0000+0x36ba0]
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.695047] [<80118460>] 0x80118460
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.698680] [<802a6384>] 0x802a6384
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.702289] [<802a4b94>] 0x802a4b94
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.705911] [<802a60f0>] 0x802a60f0
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.709534] [<802a54d0>] 0x802a54d0
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.713145] [<80400000>] 0x80400000
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.716753] [<802a60d8>] 0x802a60d8
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.720376] [<80268dd0>] 0x80268dd0
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.723986] [<802a4d34>] 0x802a4d34
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.727610] [<802682d4>] 0x802682d4
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.731228] [<802a52ac>] 0x802a52ac
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.734829] [<801bd428>] 0x801bd428
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.738447] [<8026cb54>] 0x8026cb54
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.742065] [<8025e448>] 0x8025e448
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.745677] [<8025f860>] 0x8025f860
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.749308] [<8025e448>] 0x8025e448
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.752914] [<802604a4>] 0x802604a4
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.756538] [<80260790>] 0x80260790
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.760162] [<800b2f2c>] 0x800b2f2c
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.763782] [<80062c6c>] 0x80062c6c
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.767401] 
Wed Nov 14 12:27:03 2018 kern.warn kernel: [ 5862.768949] ---[ end trace 3926c6523a1013c9 ]---
11.05.20203092Base systemBug ReportVery LowHighXiaomi Router 3G random rebootsopenwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Hello,

I have a Xiaomi 3G router. Since the day I bought it I installed Openwrt and to tell you the truth, with version 18.06 I didn’t have any problem.

A few weeks ago I updated to the new version (19.07) using LuCI and it restarts me randomly.

I tried restoring the router, reinstalling the update and it keeps randomly rebooting. Right now I have it without any additional packages installed and it still keeps rebooting randomly.

I have noticed, that almost every time I see a reboot and look at the log file the first thing that appears is this, that is, the first line after the reboot is:

Mon May 11 22:16:59 2020 daemon.info dnsmasq[1148]: exiting on receipt of SIGTERM
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: started, version 2.80 cachesize 150
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: DNS service limited to local subnets
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Mon May 11 22:16:59 2020 daemon.info dnsmasq-dhcp[2722]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain test
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain onion
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain localhost
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain local
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain invalid
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain bind
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain lan
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: reading /tmp/resolv.conf.auto
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain test
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain onion
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain localhost
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain local
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain invalid
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain bind
Mon May 11 22:16:59 2020 daemon.info dnsmasq[2722]: using local addresses only for domain lan

Please, I need help since I can’t work if it constantly resets. If you need any more information, please do not hesitate to ask me.

05.02.20202812Base systemBug ReportVery LowCriticalXiaomi router 3g Openwrt V19 problem. Upload very low. openwrt-19.07Unconfirmed Task Description

Hello, I have xiaomi router 3g, I installed OpenWrt v18 and everything perfect, perfect speed, perfect management (although improvable) etc ...
The problem comes when upgrading to v19.07 and v19.07.1, the router’s upload speed low by half (wired 600mbs v18) v19 300mbs upload speed .... it looks like a bug and it happens to many people , is there any solution to this? Is it possible to improve the router driver and improve the upload and full management of v19? thanks.

01.08.20213960Base systemBug ReportVery LowLowXiaomi MiWifi Nano 3C/ R3C/ R3L dts mismatch causes the...openwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
Xiaomi MiWifi R3L
- Software versions of OpenWrt/LEDE release, packages, etc.
OpenWrt v19.07.7
- Steps to reproduce
1) From the Wiki at https://openwrt.org/toh/xiaomi/mir3c flash the sysupgrade image: http://downloads.openwrt.org/releases/19.07.7/targets/ramips/mt76x8/openwrt-19.07.7-ramips-mt76x8-miwifi-nano-squashfs-sysupgrade.bin 2) Device does not boot anymore

The problem is the dts MIWIFI-NANO.dts defines a incompatible layout of the flash, which ends up flashing OpenWrt to the wrong part of the flash.
The OEM partition layout is:

[    1.510000] 0x000000000000-0x000001000000 : "ALL"
[    1.510000] 0x000000000000-0x000000030000 : "Bootloader"
[    1.520000] 0x000000030000-0x000000040000 : "Config"
[    1.530000] 0x000000040000-0x000000050000 : "Bdata"
[    1.530000] 0x000000050000-0x000000060000 : "Factory"
[    1.540000] 0x000000060000-0x000000070000 : "crash"
[    1.550000] 0x000000070000-0x000000080000 : "cfg_bak"
[    1.550000] 0x000000080000-0x000000140000 : "overlay"
[    1.560000] 0x000000140000-0x0000008a0000 : "OS1"
[    1.610000] 0x0000002a0000-0x0000008a0000 : "rootfs"
[    1.610000] 0x0000008a0000-0x000001000000 : "OS2"

with emphasis on OS1 and OS2.

However MIWIFI-NANO.dts defines firmware partition as:

                        partition@50000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x50000 0xfb0000>;

                        };

The bootloader will boot either OS1 or OS2 → we get an unbootable device.

Now we have two similar devices, MiWifi Nano R1 and R3L/R3C with different partition layout but the wiki proposes to flash the same image: https://openwrt.org/toh/xiaomi/mir3c https://openwrt.org/toh/xiaomi/miwifi_nano I personally still use my R3L so I would propose we add a new device type that could cover R3L.


30.05.20213839Base systemBug ReportVery LowHighXiaomi 4A Gigabit link speed auto negotiationopenwrt-21.02Unconfirmed Task Description

- Device problem occurs on

Xiaomi Mi Router 4A Gigabit Edition

- Software versions of OpenWrt/LEDE release, packages, etc.

OpenWRT 21.02-rc2

- Description

The link speed auto-negotiation is broken. I’ve a 1Gbps switch and a 4-lines ethernet cable (pins 1 2 3 6). It should be possible to achieve a max speed of 100Mbps full duplex. When I connect the switch to the WAN port of the router, the link speed shows up as 1Gbps full duplex (in the router).

Ethernet connectivity remains non-functional unless I set a proper speed and duplex (ex.

ethtool -s wan speed 100 duplex full autoneg off

).

15.02.20202834Base systemBug ReportVery LowMediumXiaomi 3G restartsopenwrt-19.07Unconfirmed Task Description

Xiaomi Mi Router 3G
MediaTek MT7621 ver:1 eco:3
OpenWrt 19.07.0 r10860-a3ffeb413b / LuCI openwrt-19.07 branch git-20.006.26738-35aa527
4.14.162

I have script that heavily uses ipset in cron. It runs every hour. Router reboots every 1~2 days with errors.

Sat Feb 15 12:00:00 2020 cron.info crond[1212]: USER root pid 9019 cmd /etc/anti-rkn/update-rkn-ip.sh
Sat Feb 15 12:00:03 2020 kern.alert kernel: [215985.710616] CPU 3 Unable to handle kernel paging request at virtual address 07406000, epc == 8010ef74, ra == 8010ee58
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.721315] Oops[#1]:
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.723668] CPU: 3 PID: 9028 Comm: ipset Not tainted 4.14.162 #0
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.729733] task: 8fcf2ca0 task.stack: 8dc22000
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.734325] $ 0   : 00000000 00000001 00000000 81243690
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.739624] $ 4   : 8054a1e8 00000001 00000001 07406000
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.744920] $ 8   : 000d3937 000d3936 00000000 00000001
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.750217] $12   : 000d3923 8df80280 8df80280 00000000
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.755514] $16   : 8fc02e00 01088020 8df80000 8d5e3880
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.760814] $20   : 00000008 8dcb8e98 00000038 00000000
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.766112] $24   : 00000000 77e75860
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.771410] $28   : 8dc22000 8dc23a28 8e125800 8010ee58
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.776710] Hi    : 00000000
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.779660] Lo    : 0000000a
Sat Feb 15 12:00:03 2020 kern.warn kernel: [215985.782611] epc   : 8010ef74 0x8010ef74
packet_write_wait: Connection to 192.168.1.1 port 22: Broken pipe
 

The script

start=`date +%s`

# create temporary sets
ipset create _tmp1 hash:net
ipset create _tmp2 hash:net

# load new content to ipset
curl -s https://antifilter.download/list/subnet.lst | awk '{print "add _tmp1 "$1;} END {print FNR > "/tmp/rkn_nets"}' | ipset -! restore
curl -s https://antifilter.download/list/ipsum.lst| awk '{print "add _tmp2 "$1;} END {print FNR > "/tmp/rkn_ipsum"}' | ipset -! restore

# swap content
ipset swap vpn_subnets _tmp1
ipset swap vpn_ipsum _tmp2

# delete temporary sets
ipset destroy _tmp1
ipset destroy _tmp2

end=`date +%s`


06.06.20203154KernelBug ReportVery LowHighXFRM state insert failure with AES-GCMopenwrt-19.07Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

X86_64 arch, kernel fails to insert XFRM states with AES-GCM as transform.
Testable with
ip x s add proto esp dst 14.0.0.70 src 14.0.0.52 spi 0×07 mode transport reqid 0×07 replay-window 32 aead ‘rfc4106(gcm(aes))’ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp

Works on Arch.
Result on X86_64 OpenWRT 19.07.3:
RTNETLINK answers: No such file or directory

On Arch 5.6.15-arch1-1, works (no output, ip x s shows the state).
Also fails 100% of the time when tested using an IKE keying daemon, e.g. strongSwan

06.03.20202885Base systemBug ReportVery LowMediumx86/x64 musl crash in 19.07.01openwrt-19.07Unconfirmed Task Description

Any program built statically with SDK 19.07.01 for x86/64 coredumps at musl init stage

Program received signal SIGSEGV, Segmentation fault.
static_init_tls (aux=0xffffd408) at src/env/__init_tls.c:92
92      src/env/__init_tls.c: No such file or directory.
(gdb) bt
#0  static_init_tls (aux=0xffffd408) at src/env/__init_tls.c:92
#1  0x08083ed2 in __init_libc (envp=0xffffd53c, pn=0xffffd69d "/home/k/openwrt/sdk-x86/build_dir/target-i386_pentium4_musl/ntfs-3g-2017.3.23-2-fuseint/src/ntfs-3g") at src/env/__libc_start_main.c:39
#2  0x08083fe0 in __libc_start_main (main=0x80490e8 <main>, argc=1, argv=0xffffd534) at src/env/__libc_start_main.c:79
#3  0x08049f19 in _start_c (p=0xffffd530) at crt/crt1.c:18
#4  0x08049ef0 in _start ()
31.03.20202951Base systemBug ReportVery LowMediumx86_64 ext4 generic: online resizing of root partition ...TrunkUnconfirmed Task Description

Used HW/SW:

- PCEngines APU2C4
- OpenWrt SNAPSHOT, r12776-437eb41f23

Steps to reproduce:

- Install needed packages:

root@OpenWrt:~# opkg update && opkg install fdisk resize2fs

- Extend root partition from 104 MB to 256 MB with fdisk:

root@OpenWrt:~# fdisk /dev/mmcblk0 << EOF
p
d
2
n
p
2
33792
+256M

w
EOF

- Extend ext4 filesystem:

root@OpenWrt:~# resize2fs /dev/mmcblk0p2

Here are the output of resize2fs:

root@OpenWrt:~# resize2fs /dev/mmcblk0p2 
resize2fs 1.45.4 (23-Sep-2019)
Filesystem at /dev/mmcblk0p2 is mounted on /; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 1
Performing an on-line resize of /dev/mmcblk0p2 to 65664 (4k) blocks.
resize2fs: Invalid argument While trying to add group #1

Here are the dmesg output:

root@OpenWrt:~# dmesg | tail -n 6
[50698.949591] EXT4-fs (mmcblk0p2): resizing filesystem from 32768 to 65664 blocks
[50698.957030] EXT4-fs (mmcblk0p2): resizing filesystem from 32768 to 65536 blocks
[50698.969299] EXT4-fs warning (device mmcblk0p2): reserve_backup_gdb:1033: reserved block 8 not at offset 7
[50698.978959] EXT4-fs warning (device mmcblk0p2): ext4_resize_fs:2120: error (-22) occurred during file system resize
[50698.989429] EXT4-fs (mmcblk0p2): resized filesystem to 32768
[50698.999227] EXT4-fs warning (device mmcblk0p2): reserve_backup_gdb:1033: reserved block 8 not at offset 7

Offline resizing does work as expected.

20.04.20213746Base systemBug ReportVery LowLowx86_64 EFI image fails to boot when USB device is plugg...openwrt-21.02Unconfirmed Task Description

Snapshot OR 21.02.0-rc1-x86_64 will not boot EFI

System: AsRock J5005-ITX (EFI only boot), 4GB ram, Intel Dual 1000PT server adapter

 

Steps used to typically install snapshot:

Boot SystemRescueCD to prompt
issue dd if=openwrt-xxx of=/dev/sda
partitions are copied over, reboot
Error on Snapshot: “error: disk ‘hd0,gpt1’ not found

on RC1 file copies over as above but it does not boot in any fashion just returns to the bios screen.

It’s been a long time since I tested the EFI snapshots, but at one point they worked fine. Given that the EFI support was added to master, I decided to wait on 2021.02 for full implementation.

The original pull on github was https://github.com/openwrt/openwrt/pull/1968, but it has since been closed, and I saw there was some work on the EFI stack for dual booting. That image may in fact boot on a non-EFI system, but I do not have any way to test.

At this point I would say both snapshot and RC1 are broken for x86_64 EFI systems.

28.09.20192522Base systemBug ReportVery LowLowx86 sysupgrade not workingTrunkUnconfirmed Task Description

Hi,
if I start “sysupgrade -v /tmp/openwrt-x86-64-combined-squashfs.img.gz” my image will not be updated.

System:
OpenWrt 18.06-SNAPSHOT, r7876-491e839262

Package:
sysupgrade

Problem:
As I mentioned earlier, I was suspicious that gzip wasn’t making it to the ramdisk..so I did some digging into how the ramdisk is assembled and found the gzip was indeed missing from the list of packages to copy over in /lib/upgrade/stage2.

Solution:
Here is the relevant function, note how gzip is missing from the list of binaries!

/lib/upgrade/stage2

switch_to_ramfs() {
	for binary in \
		/bin/busybox /bin/ash /bin/sh /bin/mount /bin/umount	\
		pivot_root mount_root reboot sync kill sleep		\
		md5sum hexdump cat zcat bzcat dd tar			\
-		ls basename find cp mv rm mkdir rmdir mknod touch chmod \
+		ls basename find cp mv rm mkdir rmdir mknod touch chmod gzip \
		'[' printf wc grep awk sed cut				\
		mtd partx losetup mkfs.ext4				\
		ubiupdatevol ubiattach ubiblock ubiformat		\
		ubidetach ubirsvol ubirmvol ubimkvol			\
		snapshot snapshot_tool					\
		$RAMFS_COPY_BIN
	do
28.07.20203252Base systemBug ReportVery LowHighX86 kernel has no emmc support, cause it can't boot fro...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on: Z83II mini pc. https://www.minipcdb.com/articles/Meet-Z83II-Mini-PC - Software versions of OpenWrt/LEDE release, packages, etc. Tested on both 19.07.3 and latest snapshots, both failed.
- Steps to reproduce: Write to image to the embedded emmc disk and boot it.

I’ve tested both 19.07.3 and latest snapshots build of openwrt x86-64 build on the Intel Z8350 fanless mini PC. Both failed to boot. The kernel can boot up correctly, but the system hang at waiting for root device. If the image is burned on USB disk, it can boot up correctly without any issue.

I searched on Google and found this post - https://forum.archive.openwrt.org/viewtopic.php?id=72195

I did the test on 19.07.3 and verified the system can boot up correctly from embedded emmc storage that by adding the following two options into the target/linux/x86/64/config-default file
CONFIG_MMC_SDHCI_ACPI
CONFIG_X86_INTEL_LPSS

Could you approve to add the options into the future update to support booting from emmc storage?
Thanks!

 


21.03.20213698ToolchainBug ReportVery LowLowx86 EFI image GUID Partition Table (GPT) is corruptTrunkUnconfirmed Task Description

If you use `fdisk` to check an OpenWrt image of x86_64 EFI, you will get an error message:

$ fdisk -l openwrt-x86-64-generic-ext4-combined-efi.img
GPT PMBR size mismatch (246303 != 246334) will be corrected by write.
The backup GPT table is corrupt, but the primary appears OK, so that will be used.
The backup GPT table is not on the end of the device. This problem will be corrected by write.
...
  • No matter what size the image are, the PMBR size is always 31 less than real value.
  • There is no secondary partition table at the end of the image.
  • The Backup LBA (offset of image file: 0×220) and Last usable LBA (0×230) values are wrong.

This doesn’t hurt the boot or the usage of OpenWrt x86. However this is NOT a correct way.

According the git history, these EFI support is introduced in this commit 1963bba. And it disabled the secondary partition table.
In the commit message, this incorret operation is ‘to reduce size’. However, this secondary partition table, which has 33 LBAs, takes only 16.5 KiB. I don’t think 16.5 KiB is worth to ‘save’ for an x86_64 device.
Besides, in the commit message the author said ‘This may cause problems when generate vmdk images or vdi images. We have to pad enough sectors when generate these images.’ So, this ‘reduce size’ operation also has side effects, and is not a good tradeoff.

As a conclusion, I hope this problem can be fixed.

16.10.20171064Base systemBug ReportVery LowLowWXR-1900DHP Problems with 17.01.2 and 17.01.3 (BCM53xx)TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
Buffalo WXR-1900DHP

- Software versions of LEDE release, packages, etc.
Stable Release 17.01.2 and 17.01.3 both partially functional. (17.01.01 works well, except wifi)
lede-17.01.2-bcm53xx-buffalo-wxr-1900dhp-squashfs.trx
lede-17.01.3-bcm53xx-buffalo-wxr-1900dhp-squashfs.trx

- Steps to reproduce
1. Flash lede-17.01.1-bcm53xx-buffalo-wxr-1900dhp-squashfs.trx
2. Observe working - luci stats on overview page, PPPoE sucessful connection
3. Flash lede-17.01.2-bcm53xx-buffalo-wxr-1900dhp-squashfs.trx via luci (uncheck preserve settings)
4. Observe issues - luci no stats for memory etc, PPPoE fails to connect after setup.

Please let me know what other information or further testing would be useful.

24.08.2016115Base systemBug ReportVery LowMediumWWAN-connections using 3g with HUAWEI ME909u-521 unstab...TrunkUnconfirmed Task Description

Actually, I am trying to stabilize wwan (3g actually; LTE later on) using pppd with my HUAWEI ME909u-521,
because either my MT7620-based router locks up during boot already; or after short period of real usage.
During night, when router is almost idle, just some watchdog date sent via wwan, no problem.

First trace of a possible problem was this msg in logread:
daemon.notice netifd: wwan (1676): Error setting WWAN mode!

Wich is expected, as in /lib/netifd/proto/3g.sh:

...

                      elif echo "$cardinfo" | grep -qi huawei; then
                              case "$service" in
                                      umts_only) CODE="14,2";;
                                      gprs_only) CODE="13,1";;
                                      *) CODE="2,2";;
                              esac
                              export MODE="AT^SYSCFG=${CODE},3FFFFFFF,2,4"    #####Will not work !!!!! Switching USB-Stick to 3g-preferred ?

...
...

                      [ -n "$MODE" ] && gcom -d "$device" -s /etc/gcom/setmode.gcom

Will not work, because the ME909u-521 rejects AT^SYSCFG . However, AT^SYSCFGEX will work, but having different syntax.
MODE=”AT^SYSCFG=${CODE},3FFFFFFF,2,4” will be effective for simpler modems.

/etc/gcom/setmode.gcom returns exit 1; but this error is not checked in 3g.sh

Not shure, whether this is the reason for my problems; however, reason of concern, as high speed modems
are more and more common.
Willing to participate in testing/debugging.

For details regarding my modem, consult
HUAWEI ME909u-521 LTE LGA Module AT Command Interface Specification
http://www.paoli.cz/out/media/HUAWEI_ME909u-521_LTE_LGA_Module_AT_Command_Interface_Specification-V100R001_02.pdf

19.07.2017915Base systemBug ReportVery LowLowWRT54GS v1.1 Power LED flashes & leds-gpio fails to loa...AllUnconfirmed Task Description

The leds-gpio module fails to load on WRT54GS v1.1 with this error message in the console:
“leds-gpio: probe of leds-gpio failed with error -16” This applies both to OpenWRT 15.05.1 and LEDE 17.01.2 as well as the latest Snapshot.

The nvram variable “boardtype” is 0×0708 on this device.
In leds.c this gets mapped to “bcm47xx_leds_linksys_wrt54g_generic” http://elixir.free-electrons.com/linux/latest/source/arch/mips/bcm47xx/leds.c#L677

With the following layout:

BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),

But this layout is invalid because this board does not have the “SecureEasySetup” WPS button.
GPIO5 is used by the reset button, that is why leds-gpio fails with error -16 (Device or resource busy).

As a quick test I changed the “boardtype” to 0×0101, leds-gpio can then load successfully and the power LED no longer flashes.
That layout is however not correct for the WRT54GS, the actual layout is:

Name	GPIO	Polarity
WLAN	0	Active low
POWER	1	Active high
DMZ	7	Active low

The problem in the source is that “boardtype” 0×0708 is not a unique identifier.
That actually matches several WRT54G v2 > v3.1 devices, and apparently also WRT54GS up to revision 2.1 that has the WPS button.
See the following old bug report for a list: https://lists.openwrt.org/pipermail/openwrt-devel/2014-June/025868.html

So the proper fix would be to introduce the variable “boardflags” as well into the code:
http://elixir.free-electrons.com/linux/latest/source/arch/mips/bcm47xx/board.c#L297

It is also worth noting that the reason the Power LED flickers is due to it’s hardware implementation.
The LED can only be on or flashing, the flashing is done by an oscillator on the board itself.
Ref: https://bugs.lede-project.org/index.php?do=details&task_id=793

24.08.20192462Base systemBug ReportVery LowHighwrt32x WIFI was breaking on 2 sec I did not get full co...AllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on wrt32x
- Software versions of OpenWrt 19.07

I tested these images on wrt32x and wrt3600, but unfortunately I gave up there was a problem on wrt32x WIFI was breaking the computer and in the relayd wrt3600 → wrt32x the maximum speed on the bridge is 10Mb. I do not observe this for version 18.06 (images downloaded from eko.one.pl). And after disconnection I did not get full connection speed of 866.7 Mb / s to the router. Although I will say that options 19.07 in Lucia look encouraging.

13.03.20202902Base systemBug ReportVery LowLowWRT32X WiFi on radio1 drops every couple of daysTrunkUnconfirmed Task Description

I’m having a problem where all my wireless clients are dropped on a wifi that is running on radio1 of my WRT32X. This used to happen once every week or so, but it seems to have gotten more frequent with it happening once every couple of days.

Versions: OpenWrt 19.07.2 r10947-65030d81f3 / LuCI openwrt-19.07 branch git-20.067.35699-cf18bdd
All packages have been recently upgraded. This used to happen on 19.06 too but it’s become more frequent recently.

Here are some things I’ve noticed:

1. Memory usage keeps steadily increasing as soon as this happens. If I don’t reboot the router, the router will eventually crash and reboot itself due to it running out of memory.
2. top doesn’t show me any processes using too much memory, so I don’t know exactly who is leaking memory when it happens (the memory leak is more likely to be a symptom than the root cause).
3. As soon as this happens, dmesg becomes flooded with messages such as “[ 1983.388642] ieee80211 phy0: staid 13 deleted” (with different “staid numbers”)
4. A router restart is sufficient to make things go back to normal.
5. This only happens for my 2.4GHz network for IoT on radio1. It does not happen for my 5GHz network on radio0, which stays stable.

FWIW, this is my current /etc/config/wireless: https://gist.github.com/luizribeiro/d15e3598747c126c0728696f5ebe8960

Any thoughts on what else I could be looking at to pinpoint where the bug is?

19.04.2017717Base systemBug ReportVery LowHighWRT3200ACM USB 3.0 ProblemAllUnconfirmed Task Description

I can´t get my Seagate Expansion Portable 1TB STEA1000400 USB3.0 drive to be be recognized on the USB 3.0 port of the router after a reboot or cold start on WRT3200 but if i remove and hotplug the drive, it is automatically detected and can be mounted.
It happens with images from Openwrt 15.05.1, LEDE 17.01.1 and many snapshots from both projects that i have installed. I have no problem with another usb2.0 drive from Samsung that is installed in another USB2.0 port.

After Cold START or REBOOT

 root@LEDE:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.20 (ag33e33@ubuntu) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3963-7ae58be) ) #0 SMP Wed Apr 12 16:12:18 2017
[    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: Linksys WRT3200ACM
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0646900, node_mem_map dfbf9000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] percpu: Embedded 13 pages/cpu @dfbce000 s22732 r8192 d22324 u53248
[    0.000000] pcpu-alloc: s22732 r8192 d22324 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,128K(u_env),256K(s_env),256K@8064K(devinfo),1920K@8320K(sysdiag),80m@10m(kernel),74m@16m(rootfs),80m@90m(alt_kernel),74m@96m(alt_rootfs),160m@10m(ubifs),-@170m(syscfg)
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512848K/524288K available (4545K kernel code, 180K rwdata, 1244K rodata, 280K init, 310K bss, 11440K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
                   lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0xc0008000 - 0xc0478918   (4547 kB)
                     .init : 0xc05d4000 - 0xc061a000   ( 280 kB)
                     .data : 0xc061a000 - 0xc0647200   ( 181 kB)
                      .bss : 0xc0647200 - 0xc0694a00   ( 310 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000000] Selected CPU frequency (16) unsupported
[    0.000000] Switching to timer-based delay loop, resolution 40ns
[    0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
[    0.000008] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000114] Calibrating local timer... 933.22MHz.
[    0.060032] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.060037] pid_max: default: 32768 minimum: 301
[    0.060076] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.060079] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.060274] CPU: Testing write buffer coherency: ok
[    0.060365] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.060376] Setting up static identity map for 0x8280 - 0x82d8
[    0.060434] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[    0.060494] mvebu-pmsu: Initializing Power Management Service Unit
[    0.060904] Booting CPU 1
[    0.061041] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.061070] Brought up 2 CPUs
[    0.061075] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[    0.061078] CPU: All CPU(s) started in SVC mode.
[    0.062739] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.062790] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.062796] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.062831] pinctrl core: initialized pinctrl subsystem
[    0.063142] NET: Registered protocol family 16
[    0.063575] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.090041] cpuidle: using governor ladder
[    0.090171] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    0.090177] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    0.120467] reg-fixed-voltage xhci0-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/xhci0-vbus-pins, deferring probe
[    0.120607] SCSI subsystem initialized
[    0.120687] libata version 3.00 loaded.
[    0.120790] usbcore: registered new interface driver usbfs
[    0.120815] usbcore: registered new interface driver hub
[    0.120835] usbcore: registered new device driver usb
[    0.121329] clocksource: Switched to clocksource armada_370_xp_clocksource
[    0.121647] NET: Registered protocol family 2
[    0.121869] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.121890] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.121920] TCP: Hash tables configured (established 4096 bind 4096)
[    0.121941] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.121952] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.122009] NET: Registered protocol family 1
[    0.122021] PCI: CLS 0 bytes, default 64
[    0.122803] Crashlog allocated RAM at address 0x3f00000
[    0.122877] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.124945] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.124953] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.125699] io scheduler noop registered
[    0.125703] io scheduler deadline registered (default)
[    0.126071] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    0.126671] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[    0.126679] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    0.126683] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[    0.126687] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.126701] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[    0.126784] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[    0.126859] PCI: bus0: Fast back to back transfers disabled
[    0.126864] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.126870] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.126918] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000
[    0.126933] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref]
[    0.126943] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref]
[    0.127002] pci 0000:01:00.0: supports D1 D2
[    0.127005] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.127068] PCI: bus1: Fast back to back transfers disabled
[    0.127073] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.127132] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000
[    0.127151] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref]
[    0.127162] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref]
[    0.127244] pci 0000:02:00.0: supports D1 D2
[    0.127246] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.127310] PCI: bus2: Fast back to back transfers disabled
[    0.127315] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    0.127384] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
[    0.127390] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
[    0.127396] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.127405] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[    0.127413] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.127418] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe02fffff]
[    0.127425] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[    0.127434] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
[    0.127443] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.127448] pci 0000:00:02.0:   bridge window [mem 0xe0400000-0xe06fffff]
[    0.127646] mv_xor f1060800.xor: Marvell shared XOR driver
[    0.181754] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    0.181840] mv_xor f1060900.xor: Marvell shared XOR driver
[    0.241717] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    0.241857] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.242621] console [ttyS0] disabled
[    0.262683] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A
[    0.983287] console [ttyS0] enabled
[    0.988691] loop: module loaded
[    0.992090] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    1.001176] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    1.010274] scsi host0: ahci-mvebu
[    1.013847] scsi host1: ahci-mvebu
[    1.017348] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[    1.025306] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[    1.033594] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[    1.041369] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[    1.047747] nand: AMD/Spansion S34ML02G2
[    1.051690] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[    1.059379] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
[    1.066556] Bad block table found at page 131008, version 0x01
[    1.072752] Bad block table found at page 130944, version 0x01
[    1.078863] 11 ofpart partitions found on MTD device pxa3xx_nand-0
[    1.085074] Creating 11 MTD partitions on "pxa3xx_nand-0":
[    1.090582] 0x000000000000-0x000000200000 : "u-boot"
[    1.095830] 0x000000200000-0x000000220000 : "u_env"
[    1.100951] 0x000000220000-0x000000260000 : "s_env"
[    1.106089] 0x0000007e0000-0x000000820000 : "devinfo"
[    1.111433] 0x000000820000-0x000000a00000 : "sysdiag"
[    1.116797] 0x000000a00000-0x000005a00000 : "kernel1"
[    1.122301] 0x000001000000-0x000005a00000 : "ubi"
[    1.127404] 0x000005a00000-0x00000aa00000 : "kernel2"
[    1.132905] 0x000006000000-0x00000aa00000 : "rootfs2"
[    1.138362] 0x00000aa00000-0x000010000000 : "syscfg"
[    1.143774] 0x000000260000-0x000000820000 : "unused_area"
[    1.149701] libphy: Fixed MDIO Bus: probed
[    1.154064] libphy: orion_mdio_bus: probed
[    1.158297] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[    1.166962] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:b9:ea:c0
[    1.175959] mvneta f1034000.ethernet eth1: Using random mac address a2:8d:5e:6d:ee:98
[    1.183881] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.190435] ehci-pci: EHCI PCI platform driver
[    1.194928] ehci-platform: EHCI generic platform driver
[    1.200245] ehci-orion: EHCI orion driver
[    1.204336] orion-ehci f1058000.usb: EHCI Host Controller
[    1.209765] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    1.217412] orion-ehci f1058000.usb: irq 37, io mem 0xf1058000
[    1.251329] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    1.257480] hub 1-0:1.0: USB hub found
[    1.261254] hub 1-0:1.0: 1 port detected
[    1.265551] usbcore: registered new interface driver usb-storage
[    1.271723] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[    1.279341] i2c /dev entries driver
[    1.294252] orion_wdt: Initial timeout 171 sec
[    1.298933] sdhci: Secure Digital Host Controller Interface driver
[    1.305146] sdhci: Copyright(c) Pierre Ossman
[    1.362546] ata1: SATA link down (SStatus 0 SControl 300)
[    1.367991] ata2: SATA link down (SStatus 0 SControl 300)
[    1.371354] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[    1.371428] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.377154] marvell-cesa f1090000.crypto: CESA device successfully registered
[    1.377556] NET: Registered protocol family 10
[    1.391590] NET: Registered protocol family 17
[    1.391604] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.391605] 8021q: 802.1Q VLAN Support v1.8
[    1.391661] Registering SWP/SWPB emulation handler
[    1.392791] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.392803] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[    1.392861] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    1.392881] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[    1.393134] hub 2-0:1.0: USB hub found
[    1.393160] hub 2-0:1.0: 1 port detected
[    1.393247] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.393253] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[    1.393292] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.393478] hub 3-0:1.0: USB hub found
[    1.393501] hub 3-0:1.0: 1 port detected
[    1.393820] UBI: auto-attach mtd6
[    1.393824] ubi0: attaching mtd6
[    1.397930] random: fast init done
[    1.401551] mmc0: new high speed SDIO card at address 0001
[    1.593092] ubi0: scanning is finished
[    1.601334] ubi0: attached mtd6 (name "ubi", size 74 MiB)
[    1.606756] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.613664] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.620479] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.627475] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0
[    1.633508] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    1.640759] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1419003487
[    1.649932] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 40
[    1.659197] ubi0: background thread "ubi_bgt0d" started, PID 668
[    1.659208] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    1.659643] block ubiblock0_0: created from ubi0:0(rootfs)
[    1.659645] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    1.659829] mvsw61xx 10.mvsw61xx: Found MV88E6352 at f1072004.mdio-mi:10
[    1.659832] mvsw61xx 10.mvsw61xx: Using direct addressing
[    1.671972] armada38x-rtc f10a3800.rtc: setting system clock to 2101-11-05 12:45:50 UTC (4160637950)
[    1.705850] Waiting 1 sec before mounting root device...
[    1.852932] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.859142] scsi host2: usb-storage 1-1:1.0
[    2.722974] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    2.730260] Freeing unused kernel memory: 280K (c05d4000 - c061a000)
[    2.736655] This architecture does not have kernel memory protection.
[    2.855724] init: Console is alive
[    2.859203] init: - watchdog -
[    2.924338] scsi 2:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
[    3.111498] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.151660] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.159777] sd 2:0:0:0: [sda] Write Protect is off
[    3.164597] sd 2:0:0:0: [sda] Mode Sense: 28 00 00 00
[    3.165152] sd 2:0:0:0: [sda] No Caching mode page found
[    3.170490] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    3.179038]  sda: sda1
[    3.183653] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.188738] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.195221] ohci-platform: OHCI generic platform driver
[    3.200902] uhci_hcd: USB Universal Host Controller Interface driver
[    3.207556] ohci-pci: OHCI PCI platform driver
[    3.212156] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.228593] init: - preinit -
[    3.422394] mvneta f1070000.ethernet tmp0: renamed from eth0
[    3.462586] mvneta f1034000.ethernet eth0: renamed from eth1
[    3.512510] mvneta f1070000.ethernet eth1: renamed from tmp0
[    3.833291] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[    3.840562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.846607] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[    3.854578] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.909798] mount_root: loading kmods from internal overlay
[    5.921475] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    5.929503] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    6.328768] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 806
[    6.357145] UBIFS (ubi0:1): recovery needed
[    6.403932] random: crng init done
[    6.431762] UBIFS (ubi0:1): recovery completed
[    6.436249] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    6.444117] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.454076] UBIFS (ubi0:1): FS size: 61329408 bytes (58 MiB, 483 LEBs), journal size 3047424 bytes (2 MiB, 24 LEBs)
[    6.464556] UBIFS (ubi0:1): reserved for root: 2896739 bytes (2828 KiB)
[    6.471198] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DEE50754-EFFE-4990-A7A6-C97266C9BEF0, small LPT model
[    6.483473] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[    6.493882] block: extroot: not configured
[    6.531369] UBIFS (ubi0:1): un-mount UBI device 0
[    6.536097] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[    6.544028] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 809
[    6.591527] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    6.599392] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.609356] UBIFS (ubi0:1): FS size: 61329408 bytes (58 MiB, 483 LEBs), journal size 3047424 bytes (2 MiB, 24 LEBs)
[    6.619838] UBIFS (ubi0:1): reserved for root: 2896739 bytes (2828 KiB)
[    6.626483] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DEE50754-EFFE-4990-A7A6-C97266C9BEF0, small LPT model
[    6.641627] mount_root: loading kmods from internal overlay
[    6.652909] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[    6.670201] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[    7.078279] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[    7.086484] block: extroot: not configured
[    7.132013] mount_root: switching to ubifs overlay
[    7.176201] ubi1: attaching mtd9
[    7.407547] ubi1: scanning is finished
[    7.415742] ubi1: attached mtd9 (name "syscfg", size 86 MiB)
[    7.421435] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    7.428338] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    7.435155] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[    7.442148] ubi1: good PEBs: 680, bad PEBs: 8, corrupted PEBs: 0
[    7.448177] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    7.455430] ubi1: max/mean erase counter: 6/4, WL threshold: 4096, image sequence number: 1148089792
[    7.464603] ubi1: available PEBs: 0, total reserved PEBs: 680, PEBs reserved for bad PEB handling: 32
[    7.473869] ubi1: background thread "ubi_bgt1d" started, PID 824
[    7.485213] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 828
[    7.537764] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "syscfg"
[    7.545202] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.555161] UBIFS (ubi1:0): FS size: 80375808 bytes (76 MiB, 633 LEBs), journal size 4063232 bytes (3 MiB, 32 LEBs)
[    7.565642] UBIFS (ubi1:0): reserved for root: 3796347 bytes (3707 KiB)
[    7.572287] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A5EAB2F8-92D3-4D0B-A69A-9F6CA9A608B3, small LPT model
[    7.585463] urandom-seed: Seeding with /etc/urandom.seed
[    7.684142] procd: - early -
[    7.687055] procd: - watchdog -
[    8.315049] procd: - ubus -
[    8.371904] procd: - init -
[    8.546612] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.557859] tun: Universal TUN/TAP device driver, 1.6
[    8.562965] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    8.571391] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    8.580401] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.587876] cryptodev: driver 1.8 loaded.
[    8.592340] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[    8.600387] Backport generated by backports.git backports-20160324-13-g24da7d3c
[    8.615059] <<Marvell 802.11ac Wireless Network Driver version 10.3.2.0-20170110>>
[    8.622702] pci 0000:00:01.0: enabling device (0140 -> 0142)
[    8.628443] ieee80211 phy0: priv->iobase0 = e0f80000
[    8.628454] ieee80211 phy0: priv->iobase1 = e1200000
[    8.628463] ieee80211 phy0: priv->pcmd_buf = ddf08000  priv->pphys_cmd_buf = 1df08000
[    8.636458] ieee80211 phy0: fw download start
[    8.699990] ieee80211 phy0: FwSize = 207660 downloaded Size = 207660 curr_iteration 65522
[   12.431324] ieee80211 phy0: fw download complete
[   12.431783] ieee80211 phy0: pcmd = ddf08000
[   12.449817] ieee80211 phy0: firmware version: 0x7080004
[   12.809338] ieee80211 phy0: firmware region code: 10
[   12.851995] ieee80211 phy0: 2G disabled, 5G enabled
[   12.856895] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[   12.862298] pci 0000:00:02.0: enabling device (0140 -> 0142)
[   12.868032] ieee80211 phy1: priv->iobase0 = e1380000
[   12.868043] ieee80211 phy1: priv->iobase1 = e1600000
[   12.868052] ieee80211 phy1: priv->pcmd_buf = dddf0000  priv->pphys_cmd_buf = 1ddf0000
[   12.874418] ieee80211 phy1: fw download start
[   12.939175] ieee80211 phy1: FwSize = 207660 downloaded Size = 207660 curr_iteration 65527
[   14.327325] ieee80211 phy1: fw download complete
[   14.327812] ieee80211 phy1: pcmd = dddf0000
[   14.345344] ieee80211 phy1: firmware version: 0x7080004
[   14.706323] ieee80211 phy1: firmware region code: 10
[   14.750021] ieee80211 phy1: 2G enabled, 5G disabled
[   14.754934] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[   14.762803] u32 classifier
[   14.765522]     input device check on
[   14.769196]     Actions configured
[   14.773037] Mirror/redirect action on
[   14.778285] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[   14.790080] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.799009] mwifiex: rx work enabled, cpus 2
[   14.846998] usbcore: registered new interface driver ums-alauda
[   14.853672] usbcore: registered new interface driver ums-cypress
[   14.860218] usbcore: registered new interface driver ums-datafab
[   14.866723] usbcore: registered new interface driver ums-freecom
[   14.873187] usbcore: registered new interface driver ums-isd200
[   14.879542] usbcore: registered new interface driver ums-jumpshot
[   14.886112] usbcore: registered new interface driver ums-karma
[   14.892282] usbcore: registered new interface driver ums-sddr09
[   14.898499] usbcore: registered new interface driver ums-sddr55
[   14.904752] usbcore: registered new interface driver ums-usbat
[   14.917781] xt_time: kernel timezone is -0000
[   14.925132] PPP generic driver version 2.4.2
[   14.929843] NET: Registered protocol family 24
[   14.935112] kmodloader: done loading kernel modules from /etc/modules.d/*
[   15.469997] mwifiex_sdio mmc0:0001:1: info: FW download over, size 391772 bytes
[   15.831665] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[   15.864262] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x242 error, result=0x2
[   15.871261] mwifiex_sdio mmc0:0001:1: mwifiex_process_cmdresp: cmd 0x242 failed during       initialization
[   15.890625] mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.7.p5)
[   15.898674] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.68.7.p5)
[   16.052347] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[   16.059309] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.065375] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   16.073372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   16.081683] br-lan: port 1(eth0.1) entered blocking state
[   16.087106] br-lan: port 1(eth0.1) entered disabled state
[   16.092675] device eth0.1 entered promiscuous mode
[   16.097485] device eth0 entered promiscuous mode
[   16.103227] br-lan: port 1(eth0.1) entered blocking state
[   16.108650] br-lan: port 1(eth0.1) entered forwarding state
[   16.122758] mvneta f1070000.ethernet eth1: configuring for fixed link mode
[   16.130044] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   16.136169] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   16.144170] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   16.342477] pppoe-wan: renamed from ppp0
[   16.900336] ieee80211 phy1: change: 0xffffffff
[   17.006509] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   17.137396] ieee80211 phy0: change: 0xffffffff
[   17.271596] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.277594] br-lan: port 2(wlan1) entered blocking state
[   17.282955] br-lan: port 2(wlan1) entered disabled state
[   17.288408] device wlan1 entered promiscuous mode
[   17.293166] br-lan: port 2(wlan1) entered blocking state
[   17.298502] br-lan: port 2(wlan1) entered forwarding state
[   17.304255] br-lan: port 2(wlan1) entered disabled state
[   17.309734] br-lan: port 3(wlan0) entered blocking state
[   17.315091] br-lan: port 3(wlan0) entered disabled state
[   17.320543] device wlan0 entered promiscuous mode
[   17.327109] ieee80211 phy0: change: 0x100
[   17.344423] ieee80211 phy0: change: 0x40
[   17.380440] ieee80211 phy1: change: 0x100
[   17.392530] ieee80211 phy1: change: 0x42
[   17.593821] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   17.600257] br-lan: port 2(wlan1) entered blocking state
[   17.605603] br-lan: port 2(wlan1) entered forwarding state
[   17.611269] ieee80211 phy0: change: 0x40
[   17.671185] ieee80211 phy1: change: 0x20
[   17.861365] ieee80211 phy0: change: 0x40
[   17.993370] ieee80211 phy0: change: 0x100
[   18.060535] ieee80211 phy0: change: 0x100
[   18.073629] ieee80211 phy0: change: 0x42
[   18.341340] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   18.347812] br-lan: port 3(wlan0) entered blocking state
[   18.353170] br-lan: port 3(wlan0) entered forwarding state
 root@LEDE:~# lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04e8:1f05 Samsung Electronics Co., Ltd S2 Portable [JMicron] (500GB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

After i remove the cable and hotplug i get this additional lines in DMESG:

 #
[  527.103849] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
[  527.134880] usb-storage 3-1:1.0: USB Mass Storage device detected
[  527.141155] scsi host3: usb-storage 3-1:1.0
[  528.154087] scsi 3:0:0:0: Direct-Access     Seagate  Expansion        1805 PQ: 0 ANSI: 6
[  529.455313] sd 3:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[  529.463210] sd 3:0:0:0: [sdb] Write Protect is off
[  529.468032] sd 3:0:0:0: [sdb] Mode Sense: 33 00 00 08
[  529.473381] sd 3:0:0:0: [sdb] No Caching mode page found
[  529.478724] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  529.499962]  sdb: sdb1 sdb2
[  529.503903] sd 3:0:0:0: [sdb] Attached SCSI disk
[  612.132851] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts:
root@LEDE:~# lsusb
Bus 003 Device 002: ID 0bc2:231b Seagate RSS LLC
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04e8:1f05 Samsung Electronics Co., Ltd S2 Portable [JMicron] (500GB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub 


01.04.20213717KernelBug ReportVery LowCriticalWRT1900ACS LAN Switch speed on kernel 5.4TrunkUnconfirmed Task Description

Dear, I ‘ve found an issue with DSA and kernel 5.4.
I’m on 21.02 SNAPSHOT.
My upload speed on WAN is only 10 mbps when a device with LAN connection is linked to 10mbps.
When a device 100mbps is connected to switch all speed is 100mbps not 1 gbps
It seems that the upload speed follow the lowest lan speed...

First test is with 10mbps connection on LAN3. –> Test was done from LAN1 to router.
Second test is with a LAN2 device conneted with 100mbps. –> Test was done from LAN1 to router

PS C:\Users\Andrea\Downloads\iperf-3.1.3-win64> .\iperf3.exe -c 192.168.181.1
Connecting to host 192.168.181.1, port 5201
[  4] local 192.168.181.159 port 50593 connected to 192.168.181.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.01   sec   384 KBytes  3.12 Mbits/sec
[  4]   1.01-2.01   sec   640 KBytes  5.26 Mbits/sec
[  4]   2.01-3.01   sec  1.12 MBytes  9.35 Mbits/sec
[  4]   3.01-4.01   sec  1.12 MBytes  9.52 Mbits/sec
[  4]   4.01-5.01   sec  1.12 MBytes  9.41 Mbits/sec
[  4]   5.01-6.00   sec  1.12 MBytes  9.50 Mbits/sec
[  4]   6.00-7.00   sec  1.12 MBytes  9.46 Mbits/sec
[  4]   7.00-8.00   sec  1.12 MBytes  9.41 Mbits/sec
[  4]   8.00-9.01   sec  1.12 MBytes  9.40 Mbits/sec
[  4]   9.01-10.01  sec  1.12 MBytes  9.44 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.01  sec  10.0 MBytes  8.38 Mbits/sec                  sender
[  4]   0.00-10.01  sec  9.81 MBytes  8.23 Mbits/sec                  receiver

iperf Done.
PS C:\Users\Andrea\Downloads\iperf-3.1.3-win64> .\iperf3.exe -c 192.168.181.1 -R
Connecting to host 192.168.181.1, port 5201
Reverse mode, remote host 192.168.181.1 is sending
[  4] local 192.168.181.159 port 50611 connected to 192.168.181.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  95.6 MBytes   802 Mbits/sec
[  4]   1.00-2.00   sec  97.9 MBytes   821 Mbits/sec
[  4]   2.00-3.00   sec   101 MBytes   847 Mbits/sec
[  4]   3.00-4.00   sec   101 MBytes   850 Mbits/sec
[  4]   4.00-5.00   sec   105 MBytes   884 Mbits/sec
[  4]   5.00-6.00   sec  92.3 MBytes   774 Mbits/sec
[  4]   6.00-7.00   sec   105 MBytes   877 Mbits/sec
[  4]   7.00-8.00   sec   102 MBytes   849 Mbits/sec
[  4]   8.00-9.00   sec  99.4 MBytes   836 Mbits/sec
[  4]   9.00-10.00  sec   107 MBytes   894 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec  1006 MBytes   844 Mbits/sec   23             sender
[  4]   0.00-10.00  sec  1006 MBytes   844 Mbits/sec                  receiver

This new test is with latest 19.07 (previous kernel no dsa)

BusyBox v1.30.1 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt 19.07-SNAPSHOT, r11328-81266d9001
 -----------------------------------------------------
root@WRT1900ACS:~# iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.181.159, port 48454
[  5] local 192.168.181.1 port 5201 connected to 192.168.181.159 port 48456
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec   108 MBytes   905 Mbits/sec                  
[  5]   1.00-2.00   sec   109 MBytes   915 Mbits/sec                  
[  5]   2.00-3.00   sec   109 MBytes   914 Mbits/sec                  
[  5]   3.00-4.00   sec   107 MBytes   900 Mbits/sec                  
[  5]   4.00-5.00   sec   108 MBytes   907 Mbits/sec                  
[  5]   5.00-6.00   sec   109 MBytes   912 Mbits/sec                  
[  5]   6.00-7.00   sec   107 MBytes   896 Mbits/sec                  
[  5]   7.00-8.00   sec   109 MBytes   917 Mbits/sec                  
[  5]   8.00-9.00   sec   108 MBytes   905 Mbits/sec                  
[  5]   9.00-10.00  sec   108 MBytes   903 Mbits/sec                  
[  5]  10.00-10.00  sec   293 KBytes   892 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.00  sec  1.06 GBytes   907 Mbits/sec 

I also noticed that with the latest version the switch LEDs flash all together and not only follow where there is communication, but I don’t think this is a problem.

Is this speed issue a bug or I do something wrong? I don’t make any changes to network config from standard. Only changed IP from 192.168.1.1 to 192.168.181.1.

29.01.20192091Base systemBug ReportVery LowLowwrt1900 (v1 mamba) USB 3 port brokenTrunkUnconfirmed Task Description

Appears to be a regression on master with no power to USB 3 port on wrt1900, still works on 18.x
forum thread

30.06.20203211KernelBug ReportVery LowCriticalwrt1200ac issue with mvneta driver in 5.4 kernel - inte...TrunkUnconfirmed Task Description

wrt1200ac works OK with 4.19.108 kernel. eth1 is the upstream port, eth0 is the 4 local gigabit ports. dmesg reports:

[ 1.098981] 0×000000280000-0×000000900000 : “unused_area” [ 1.105081] libphy: Fixed MDIO Bus: probed
[ 1.109546] libphy: orion_mdio_bus: probed
[ 1.113853] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.122882] mvneta f1070000.ethernet eth0: Using hardware mac address c0:56:27:70:5b:65
[ 1.132447] mvneta f1034000.ethernet eth1: Using random mac address 9e:2e:40:0f:3a:63
[ 1.140510] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.147081] ehci-pci: EHCI PCI platform driver
[ 1.151575] ehci-platform: EHCI generic platform driver
[ 1.156913] ehci-orion: EHCI orion driver
[ 1.161040] orion-ehci f1058000.usb: EHCI Host Controller

Under the 5.4.48 kernel, eth1 doesn’t show up, so no upstream connectivity.

[ 1.208713] orion-mdio f1072004.mdio: IRQ index 0 not found
[ 1.214360] libphy: orion_mdio_bus: probed
[ 1.218622] mv88e6085 f1072004.mdio-mii:00: switch 0×1760 detected: Marvell 88E6176, revision 1
[ 1.389672] libphy: mv88e6xxx SMI: probed
[ 1.395805] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.404784] mvneta f1070000.ethernet eth0: Using hardware mac address c0:56:27:70:5b:65
[ 1.412919] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.419511] ehci-pci: EHCI PCI platform driver
[ 1.424011] ehci-platform: EHCI generic platform driver
[ 1.429356] ehci-orion: EHCI orion driver
[ 1.433476] orion-ehci f1058000.usb: EHCI Host Controller


29.11.20214163Base systemBug ReportVery LowHighwrt1200ac - Unstable 5GHz after upgrading to OpenWrt 21...openwrt-21.02Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on Linksys WRT1200AC
- Software versions of OpenWrt/LEDE release, packages, etc.

 OpenWrt 21.02.1, r16325-88151b8303

- Steps to reproduce - just upgrade to OpenWrt 21.02.1, r16325-88151b8303

 

More details https://github.com/kaloz/mwlwifi/issues/404


13.10.2016224Base systemBug ReportVery LowLowwrong source IP when logging to remote IPv6 syslog serv...TrunkAssigned Task Description

Hello,

I’m trying to send log to remote IPv6 syslog server (x:y:z:12::1), but packets received by syslog server are invalid. Instead of public IPv6 address, syslog udp packets are sent with ::1 source IP and therefore ignored by destination server. Logging over IPv4 works ok.

tcpdump log from destination syslog server:
23:34:16.988433 IP6 ::1.38044 > x:y:z:12::1.514: SYSLOG daemon.notice, length: 65

Configuration:

/etc/config/system:

 option log_ip 'x:y:z:12::1'

Device is in the same range as syslog server (x:y:z:12::119/64) and has native IPv6 connectivity. Other services (dropbear, ntp client, snmpd, luci) are running fine over IPv6.

Device is TP-Link WDR3600, running lede reboot-1818-gb81fc29.

Showing tasks 1 - 50 of 1430 Page 1 of 291 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing