OpenWrt/LEDE Project

Welcome to the OpenWrt Project bug reporting and issue tracking system

Problems to be reported here are for the current OpenWrt and legacy LEDE Project’s targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to openwrt-bugs@infradead.org.

OpenedIDCategoryTask TypePriority  descSeveritySummaryReported InStatus
02.01.20213559Base systemBug ReportMediumLowuclient-fetch fails to download more than 2 filesAllNew Task Description

uclient-fetch has support for downloading several files:

uclient-fetch URL1 URL2 URL3 ...

However, this only works for the first two URLs. The third and above URLs simply cause uclient-fetch to re-download the second URL again.

In addition, only the first URL is checked for validity. If a subsequent URL is invalid, then the previous URL is re-used:

uclient-fetch http://example.com invalid

This example will download http://example.com twice.

01.01.20213552Base systemBug ReportMediumLowLinksys RE6500 bootloops with latest snapshotsTrunkNew Task Description

The RE6500 was working fine on an old 19.07 snapshot: OpenWrt 19.07-SNAPSHOT r10578-b3d70f628b

I sysupgraded to latest snapshot and it does not come up. Judging from the LEDs, it seems to bootloop.

Booting the latest snapshot initramfs through TFTP works. I sysupgraded again from the initramfs, and it still bootloops.

Possibly related to FS#3539. I will try to get a serial output to see what happens.

08.05.20203070Base systemBug ReportMediumLowkmod-cryptodev: WARNING: possible circular locking depe...TrunkNew Task Description

OpenWrt master r13174-73fa1aba94 on octeon with kernel 5.4

[   70.971145] 
[   70.972662] ======================================================
[   70.978843] WARNING: possible circular locking dependency detected
[   70.985029] 5.4.39 #0 Not tainted
[   70.988348] ------------------------------------------------------
[   70.994531] unbound/2895 is trying to acquire lock:
[   70.999414] 800000041baeb868 (&pcr->fcrypt.sem){+.+.}, at: crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.009267] 
[   71.009267] but task is already holding lock:
[   71.015103] 800000041b911468 (&ses_new->sem){+.+.}, at: crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.024691] 
[   71.024691] which lock already depends on the new lock.
[   71.024691] 
[   71.032866] 
[   71.032866] the existing dependency chain (in reverse order) is:
[   71.040347] 
[   71.040347] -> #1 (&ses_new->sem){+.+.}:
[   71.045773]        lock_acquire+0xe0/0x220
[   71.049888]        __mutex_lock+0x94/0x628
[   71.054001]        crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.060365]        crypto_get_session_by_sid+0x1e4/0x12b8 [cryptodev]
[   71.066806]
[   71.066806] -> #0 (&pcr->fcrypt.sem){+.+.}:
[   71.072485]        check_noncircular+0x1a8/0x260
[   71.077110]        __lock_acquire+0x12f8/0x19f8
[   71.081648]        lock_acquire+0xe0/0x220
[   71.085754]        __mutex_lock+0x94/0x628
[   71.089862]        crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.096226]        crypto_get_session_by_sid+0x6cc/0x12b8 [cryptodev]
[   71.102666]
[   71.102666] other info that might help us debug this:
[   71.102666]
[   71.110668]  Possible unsafe locking scenario:
[   71.110668]
[   71.116588]        CPU0                    CPU1
[   71.121119]        ----                    ----
[   71.125650]   lock(&ses_new->sem);
[   71.129058]                                lock(&pcr->fcrypt.sem);
[   71.135242]                                lock(&ses_new->sem);
[   71.141165]   lock(&pcr->fcrypt.sem);
[   71.144834]
[   71.144834]  *** DEADLOCK ***
[   71.144834]
[   71.150756] 1 lock held by unbound/2895:
[   71.154681]  #0: 800000041b911468 (&ses_new->sem){+.+.}, at: crypto_get_session_by_sid+0xbc/0x12b8 [cryptodev]
[   71.164700]
[   71.164700] stack backtrace:
[   71.169067] CPU: 1 PID: 2895 Comm: unbound Not tainted 5.4.39 #0
[   71.175075] Stack : ffffffff82790000 0000000000000000 0000000010108ce0 ed34220aed96997f
[   71.183091]         ed34220aed96997f 0000000000000000 800000041bb976f8 ffffffff837d0000
[   71.191106]         0000000000000000 0000000000000001 0000000000000000 ffffffff811ac4bc
[   71.199118]         6e626f756e64204e 0000000000000000 ffffffffffffffff 0000000000000010
[   71.207132]         0000000000000000 ffffffff81b40000 fffe000000000000 ffffffff81bc0000
[   71.215145]         0000000000000000 0000000000000000 ffffffff81b40000 0000000000000000
[   71.223158]         800000041f2e6200 0000000000000000 ffffffff81597628 1e00000010734ac7
[   71.231173]         0000000000000001 800000041bb94000 800000041bb976f0 47500c0a872e7996
[   71.239186]         ffffffff81865d8c 0000000000000000 800000041bb97828 ed34220aed96997f
[   71.247198]         ffffffff81b40bf7 ffffffff81865c54 ffffffff8111d4c8 ffffffff81a42a50
[   71.255213]         ...
[   71.257668] Call Trace:
[   71.260136] [<ffffffff8111d4c8>] show_stack+0x40/0x128
[   71.265288] [<ffffffff81865d8c>] dump_stack+0xe4/0x150
[   71.270444] [<ffffffff8119fb58>] check_noncircular+0x1a8/0x260
[   71.276289] [<ffffffff811a2d38>] __lock_acquire+0x12f8/0x19f8
[   71.282046] [<ffffffff811a3d80>] lock_acquire+0xe0/0x220
[   71.287374] [<ffffffff8188532c>] __mutex_lock+0x94/0x628
[   71.292706] [<ffffffffc02a7638>] crypto_get_session_by_sid+0x40/0x12b8 [cryptodev]
[   71.300290] [<ffffffffc02a7cc4>] crypto_get_session_by_sid+0x6cc/0x12b8 [cryptodev]
21.12.20192690Base systemBug ReportMediumMediumImagebuilder: "opkg_install_pkg: Package size mismatch"...AllNew Task Description

The Imagebuilder fails in the following situation:

  • download and unpack the imagebuilder
  • build an image: it works
  • wait a few days/weeks
  • try to build an image again with the same imagebuilder: it fails

It fails quite late during building with lots of errors like this:

   opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   opkg_install_cmd: Cannot install package luci.
   opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   opkg_install_cmd: Cannot install package base-files.
   opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   opkg_install_cmd: Cannot install package busybox.

This happens with stable releases (18.06.5), RC releases (19.07.0-rc2), and with several targets.

It looks like package sizes are somehow kept in a local cache during the first build, and are not updated when building again a few days later. This is strange because the imagebuilder seems to fetch new versions of the Packages.gz files.

Below is the full log.

  $ make image PROFILE=rb-nor-flash-16M"" BIN_DIR="${IMAGEBUILDER_DIR}" EXTRA_IMAGE_NAME="rzn" FILES="files/" PACKAGES="luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr -ppp -ppp-mod-pppoe -kmod-ppp -kmod-pppoe -kmod-pppox"
  
  Building images for ar71xx - MikroTik RouterBoard (16 MB SPI NOR)
  Packages: luci luci-mod-admin-full luci-i18n-base-en luci-i18n-base-fr luci-i18n-firewall-fr base-files busybox dnsmasq dropbear firewall fstools ip6tables iptables kernel kmod-ath9k kmod-gpio-button-hotplug kmod-ledtrig-gpio libc libgcc logd mtd netifd odhcp6c odhcpd-ipv6only opkg rbcfg rssileds swconfig uboot-envtools uci uclient-fetch wpad-mini
  
  Downloading http://downloads.openwrt.org/releases/18.06.5/targets/ar71xx/mikrotik/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_core
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/base/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_base
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_luci
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/packages/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_packages
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/routing/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_routing
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/telephony/Packages.gz
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/openwrt_telephony
  Downloading file:packages/Packages
  Updated list of available packages in /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ar71xx/../../../../../../../../../home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/imagebuilder
  
  Installing packages...
  Installing libc (1.1.19-2) to root...
  Installing libgcc (7.3.0-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libgcc_7.3.0-2_mips_24kc.ipk.
  Configuring libgcc.
  Configuring libc.
  Installing kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) to root...
  Configuring kernel.
  Installing luci (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci_git-19.353.67991-868abc1-1_all.ipk
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libubox_2018-07-25-c83a84af-2_mips_24kc.ipk.
  Installing luci-mod-admin-full (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-mod-admin-full_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-en (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-en_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-base (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-base_git-19.353.67991-868abc1-1_mips_24kc.ipk
  Installing luci-i18n-base-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-base-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-i18n-firewall-fr (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-i18n-firewall-fr_git-19.353.67991-868abc1-1_all.ipk
  Installing luci-app-firewall (git-19.353.67991-868abc1-1) to root...
  Downloading http://downloads.openwrt.org/releases/18.06.5/packages/mips_24kc/luci/luci-app-firewall_git-19.353.67991-868abc1-1_all.ipk
  Installing base-files (194.2-r7897-9d401013fc) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/base-files_194.2-r7897-9d401013fc_mips_24kc.ipk.
  Installing libuci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libuci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing busybox (1.28.4-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/busybox_1.28.4-3_mips_24kc.ipk.
  Installing dnsmasq (2.80-1.4) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dnsmasq_2.80-1.4_mips_24kc.ipk.
  Installing dropbear (2017.75-7.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/dropbear_2017.75-7.1_mips_24kc.ipk.
  Installing firewall (2018-08-13-1c4d5bcd-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/firewall_2018-08-13-1c4d5bcd-1_mips_24kc.ipk.
  Installing fstools (2019-03-28-ff1ded63-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/fstools_2019-03-28-ff1ded63-5_mips_24kc.ipk.
  Installing ip6tables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/ip6tables_1.6.2-3_mips_24kc.ipk.
  Installing kmod-nf-reject6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-reject6_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt_4.9.198-1_mips_24kc.ipk
  Installing kmod-nf-ipt6 (4.9.198-1) to root...
  Downloading file:packages/kmod-nf-ipt6_4.9.198-1_mips_24kc.ipk
  Installing kmod-ipt-core (4.9.198-1) to root...
  Downloading file:packages/kmod-ipt-core_4.9.198-1_mips_24kc.ipk
  Installing kmod-ip6tables (4.9.198-1) to root...
  Downloading file:packages/kmod-ip6tables_4.9.198-1_mips_24kc.ipk
  Installing libip4tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip4tc_1.6.2-3_mips_24kc.ipk.
  Installing libip6tc (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libip6tc_1.6.2-3_mips_24kc.ipk.
  Installing libxtables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libxtables_1.6.2-3_mips_24kc.ipk.
  Installing iptables (1.6.2-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/iptables_1.6.2-3_mips_24kc.ipk.
  Package iptables (1.6.2-3) installed in root is up to date.
  Package kernel (4.9.198-1-3ba2e8c5db2fc4389b537731cf37120c) installed in root is up to date.
  Installing kmod-ath9k (4.9.198+2017-11-01-10) to root...
  Downloading file:packages/kmod-ath9k_4.9.198%2b2017-11-01-10_mips_24kc.ipk
  Installing libnl-tiny (0.1-5) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/libnl-tiny_0.1-5_mips_24kc.ipk.
  Installing kmod-gpio-button-hotplug (4.9.198-2) to root...
  Downloading file:packages/kmod-gpio-button-hotplug_4.9.198-2_mips_24kc.ipk
  Installing kmod-ledtrig-gpio (4.9.198-1) to root...
  Downloading file:packages/kmod-ledtrig-gpio_4.9.198-1_mips_24kc.ipk
  Package libc (1.1.19-2) installed in root is up to date.
  Package libgcc (7.3.0-2) installed in root is up to date.
  Installing logd (2018-02-14-128bc35f-2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/logd_2018-02-14-128bc35f-2_mips_24kc.ipk.
  Installing mtd (23) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/mtd_23_mips_24kc.ipk.
  Installing libubox (2018-07-25-c83a84af-2) to root...
  Installing netifd (2019-01-31-a2aba5c7-2.1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/netifd_2019-01-31-a2aba5c7-2.1_mips_24kc.ipk.
  Installing odhcp6c (2018-07-14-67ae6a71-15) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcp6c_2018-07-14-67ae6a71-15_mips_24kc.ipk.
  Installing odhcpd-ipv6only (1.15-3) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/odhcpd-ipv6only_1.15-3_mips_24kc.ipk.
  Installing opkg (2019-06-14-dcbc142e-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/opkg_2019-06-14-dcbc142e-1_mips_24kc.ipk.
  Installing rbcfg (2) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rbcfg_2_mips_24kc.ipk.
  Installing rssileds (0.2-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/rssileds_0.2-1_mips_24kc.ipk.
  Installing swconfig (11) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/swconfig_11_mips_24kc.ipk.
  Installing uboot-envtools (2018.03-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uboot-envtools_2018.03-1_mips_24kc.ipk.
  Installing uci (2019-05-17-f199b961-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uci_2019-05-17-f199b961-1_mips_24kc.ipk.
  Installing uclient-fetch (2018-11-24-3ba74ebc-1) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/uclient-fetch_2018-11-24-3ba74ebc-1_mips_24kc.ipk.
  Installing wpad-mini (2018-05-21-62566bc2-8) to root...
  Copying /home/foo/doc/openwrt_imagebuilder/openwrt-imagebuilder-18.06.5-ar71xx-mikrotik.Linux-x86_64/dl/wpad-mini_2018-05-21-62566bc2-8_mips_24kc.ipk.
  Configuring kmod-nf-reject6.
  Configuring uboot-envtools.
  Configuring kmod-ledtrig-gpio.
  Configuring rbcfg.
  Configuring luci-app-firewall.
  Configuring kmod-nf-ipt.
  Configuring libxtables.
  Configuring libip4tc.
  Configuring kmod-nf-ipt6.
  Configuring kmod-ipt-core.
  Configuring kmod-ip6tables.
  Configuring fstools.
  Configuring libip6tc.
  Configuring luci-base.
  Configuring luci-mod-admin-full.
  Configuring kmod-gpio-button-hotplug.
  Configuring luci-i18n-firewall-fr.
  Configuring iptables.
  Configuring ip6tables.
  Configuring luci-i18n-base-en.
  Configuring luci-i18n-base-fr.
  Collected errors:
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package luci.
   * opkg_install_pkg: Package size mismatch: libuci is 15454 bytes, expecting 15461 bytes
   * opkg_install_cmd: Cannot install package base-files.
   * opkg_install_pkg: Package size mismatch: busybox is 212951 bytes, expecting 212973 bytes
   * opkg_install_cmd: Cannot install package busybox.
   * opkg_install_pkg: Package size mismatch: dnsmasq is 99783 bytes, expecting 99775 bytes
   * opkg_install_cmd: Cannot install package dnsmasq.
   * opkg_install_pkg: Package size mismatch: dropbear is 86613 bytes, expecting 86610 bytes
   * opkg_install_cmd: Cannot install package dropbear.
   * opkg_install_pkg: Package size mismatch: firewall is 40776 bytes, expecting 40777 bytes
   * opkg_install_cmd: Cannot install package firewall.
   * opkg_install_pkg: Package size mismatch: libnl-tiny is 12953 bytes, expecting 12948 bytes
   * opkg_install_cmd: Cannot install package kmod-ath9k.
   * opkg_install_pkg: Package size mismatch: logd is 10114 bytes, expecting 10111 bytes
   * opkg_install_cmd: Cannot install package logd.
   * opkg_install_pkg: Package size mismatch: libubox is 19365 bytes, expecting 19361 bytes
   * opkg_install_cmd: Cannot install package mtd.
   * opkg_install_pkg: Package size mismatch: netifd is 62005 bytes, expecting 62004 bytes
   * opkg_install_cmd: Cannot install package netifd.
   * opkg_install_pkg: Package size mismatch: odhcp6c is 23650 bytes, expecting 23646 bytes
   * opkg_install_cmd: Cannot install package odhcp6c.
   * opkg_install_pkg: Package size mismatch: odhcpd-ipv6only is 28830 bytes, expecting 28845 bytes
   * opkg_install_cmd: Cannot install package odhcpd-ipv6only.
   * opkg_install_pkg: Package size mismatch: opkg is 58890 bytes, expecting 58895 bytes
   * opkg_install_cmd: Cannot install package opkg.
   * opkg_install_pkg: Package size mismatch: rssileds is 4056 bytes, expecting 4059 bytes
   * opkg_install_cmd: Cannot install package rssileds.
   * opkg_install_pkg: Package size mismatch: swconfig is 9478 bytes, expecting 9484 bytes
   * opkg_install_cmd: Cannot install package swconfig.
   * opkg_install_pkg: Package size mismatch: uci is 7267 bytes, expecting 7262 bytes
   * opkg_install_cmd: Cannot install package uci.
   * opkg_install_pkg: Package size mismatch: uclient-fetch is 7489 bytes, expecting 7485 bytes
   * opkg_install_cmd: Cannot install package uclient-fetch.
   * opkg_install_pkg: Package size mismatch: wpad-mini is 258733 bytes, expecting 258725 bytes
   * opkg_install_cmd: Cannot install package wpad-mini.
  make[2]: *** [Makefile:153: package_install] Error 255
  make[1]: *** [Makefile:114: _call_image] Error 2
  make: *** [Makefile:193: image] Error 2
09.10.20192541KernelBug ReportMediumLowHardware offloading causes some flows to fail to be NAT...openwrt-19.07New Task Description

Just after a reboot, some flows are not NATed: packets from a machine in the LAN are sent to the WAN port with a private source IP address.

This is on a Linksys RE6500 (ramips mt7621) running openwrt 19.07-SNAPSHOT r10578-b3d70f628.
It is configured with flow_offloading and flow_offloading_hw.

Here is a tcpdump capture showing the problem on the WAN port (172.23.184.0/24 is my LAN address space):

root@openwrt:~# tcpdump -n -i eth0.20 net 172.23.184.0/24
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0.20, link-type EN10MB (Ethernet), capture size 262144 bytes
18:51:21.756552 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 112
18:51:22.651556 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148
18:51:26.681032 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 768
18:51:27.771654 IP 172.23.184.119.51001 > 91.224.XX.YY.52001: UDP, length 148

Here is what conntrack -L says:

udp      17 55 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=93 bytes=20412 [UNREPLIED] src=91.224.XX.YY dst=172.23.184.119 sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Notice the second dst= that shows the private IP address of the LAN machine.

After restarting the firewall, the flow is correctly NAT-ed and conntrack -L shows the correct entry (193.33.ZZ.WW is my public IP address):

udp      17 175 src=172.23.184.119 dst=91.224.XX.YY sport=51001 dport=52001 packets=4 bytes=704 [UNREPLIED] src=91.224.XX.YY dst=193.33.ZZ.WW sport=52001 dport=51001 packets=0 bytes=0 mark=0 use=1

Note: when I only enable flow_offloading, the issue does not appear anymore, so this really seems to be an issue with the hw offloading integration in the firewall.

14.05.20192283Base systemBug ReportMediumLowm76: crash when creating an additional monitor interfac...TrunkAssigned Task Description

OpenWrt: b65a270c851ee422f26a0af10c879ebb87cb8f76
mt76: 4.14.108+2019-03-27-a11b6734-1

While debugging an unicast wifi bug, I tried to create a mon0 interface
iw wlan0 interface add mon0 type monitor.

Modules:	mt7603e@830f0000+87a0	mt76@83128000+6060	mac80211@83080000+6a240	iptable_raw@83111000+2e0	iptable_nat@831c5000+340	iptable_mangle@83bd7000+400	iptable_filter@83135000+360	ipt_REJECT@831c3000+3a0	ipt_MASQUERADE@8311f000+280	ipt_ECN@83bca000+560	ip_tables@831c0000+2650	cfg80211@83000000+35fb0	xt_time@83bbd000+6c0	xt_tcpudp@83baa000+6e0	xt_tcpmss@831ac000+400	xt_statistic@8311d000+320	xt_state@83151000+2a0xt_recent@831ae000+1bf0	xt_nat@83bd0000+5e0	xt_multiport@83bd6000+4e0	xt_mark@83134000+280	xt_mac@83bd3000+240	xt_limit@8315f000+480	xt_length@83125000+2a0	xt_hl@83132000+300	xt_helper@83126000+340	xt_ecn@83127000+520	xt_dscp@8313c000+3c0	xt_conntrack@83ba8000+8e0	xt_connmark@8311c000+420	xt_connlimit@83136000+1110	xt_connbytes@83bcd000+620	xt_comment@83117000+1c0	xt_TCPMSS@83bd2000+800	xt_REDIRECT@83bce000+2a0	xt_LOG@83bcc000+280	xt_HL@83bc9000+520	xt_FLOWOFFLOAD@83bc7000+ab0	xt_DSCP@8313b000+5c0	xt_CT@8313d000+9e0	xt_CLASSIFY@83131000+220	x_tables@83bc0000+30f0	nf_reject_ipv4@83130000+780	nf_nat_redirect@8311e000+560	nf_nat_masquerade_ipv4@83bac000+590	nf_conntrack_ipv4@83bb8000+1100	nf_nat_ipv4@83bba000+c70	nf_nat@83120000+2250	nf_log_ipv4@83bad000+dc0	nf_log_common@83116000+980	nf_flow_table_hw@83bbe000+820	nf_flow_table@83ba4000+3310	nf_defrag_ipv4@83153000+3e0	nf_conntrack_rtcache@83112000+8a0	compat@83118000+1700	act_connmark@83113000+850	nf_conntrack@83100000+d2c0	sch_tbf@8314e000+1680	sch_ingress@8314a000+4a0	sch_htb@83ba0000+36d0	sch_hfsc@83158000+39e0	em_u32@831ba000+200	cls_u32@83154000+2330	cls_tcindex@8314c000+15c0	cls_route@831be000+1540	cls_matchall@831a3000+a20	cls_fw@83144000+1000	cls_flow@83148000+1780	cls_basic@831bb000+d00	act_skbedit@831b4000+9f0	act_mirred@831b5000+e50	ifb@831a0000+be0	l2tp_ip@8316e000+1410	l2tp_eth@831a4000+a00	l2tp_netlink@831a6000+1f90	l2tp_core@831a8000+3110	udp_tunnel@83b99000+920	leds_gpio@83b4f000+b20	gpio_button_hotplug@83b50000+1900
<6>[    0.191477] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.197077] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.203431] NET: Registered protocol family 1
<7>[    0.207612] PCI: CLS 0 bytes, default 32
<4>[    0.210849] Crashlog allocated RAM at address 0x3f00000
<6>[    0.217463] workingset: timestamp_bits=30 max_order=14 bucket_order=0
<6>[    0.229138] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.234765] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<6>[    0.254072] io scheduler noop registered
<6>[    0.257804] io scheduler deadline registered (default)
<6>[    0.263580] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
<6>[    0.270756] console [ttyS0] disabled
<6>[    0.274257] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
<6>[    0.282984] console [ttyS0] enabled
<6>[    0.289970] bootconsole [early0] disabled
<3>[    0.298544] cacheinfo: Failed to find cpu0 device node
<4>[    0.303799] cacheinfo: Unable to detect cache hierarchy for CPU 0
<6>[    0.310628] spi-mt7621 10000b00.spi: sys_freq: 193333333
<6>[    0.329261] m25p80 spi0.0: s25fl064k (8192 Kbytes)
<5>[    0.334207] 4 fixed-partitions partitions found on MTD device spi0.0
<5>[    0.340643] Creating 4 MTD partitions on "spi0.0":
<5>[    0.345526] 0x000000000000-0x000000020000 : "boot"
<5>[    0.351255] 0x000000020000-0x0000007c0000 : "firmware"
<5>[    0.359405] 2 tplink-fw partitions found on MTD device firmware
<5>[    0.365482] Creating 2 MTD partitions on "firmware":
<5>[    0.370527] 0x000000000000-0x00000014f3a3 : "kernel"
<5>[    0.376451] 0x00000014f3a4-0x0000007a0000 : "rootfs"
<5>[    0.382277] mtd: device 3 (rootfs) set to be root filesystem
<5>[    0.389534] 1 squashfs-split partitions found on MTD device rootfs
<5>[    0.395888] 0x000000390000-0x0000007a0000 : "rootfs_data"
<5>[    0.402220] 0x0000007c0000-0x0000007d0000 : "config"
<5>[    0.408051] 0x0000007d0000-0x000000800000 : "factory"
<6>[    0.414688] libphy: Fixed MDIO Bus: probed
<6>[    0.431000] rt3050-esw 10110000.esw: link changed 0x00
<6>[    0.437801] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
<6>[    0.447188] NET: Registered protocol family 17
<6>[    0.451831] 8021q: 802.1Q VLAN Support v1.8
<6>[    0.468953] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
<6>[    0.476929] Freeing unused kernel memory: 136K
<4>[    0.481474] This architecture does not have kernel memory protection.
<14>[    1.719920] init: Console is alive
<14>[    1.723707] init: - watchdog -
<5>[    2.267376] random: fast init done
<14>[    3.000227] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<14>[    3.073195] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[    3.091032] init: - preinit -
<6>[    4.256850] rt3050-esw 10110000.esw: link changed 0x00
<5>[    4.687762] random: procd: uninitialized urandom read (4 bytes read)
<13>[    4.780523] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
<12>[    4.822673] urandom-seed: Seed file not found (/etc/urandom.seed)
<14>[    4.918017] procd: - early -
<14>[    4.921055] procd: - watchdog -
<14>[    5.550307] procd: - watchdog -
<14>[    5.553880] procd: - ubus -
<5>[    5.600493] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[    5.667639] random: ubusd: uninitialized urandom read (4 bytes read)
<14>[    5.675598] procd: - init -
<14>[    6.002174] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[    6.011883] l2tp_core: L2TP core driver, V2.0
<6>[    6.017941] l2tp_netlink: L2TP netlink interface
<6>[    6.024375] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
<6>[    6.032295] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
<6>[    6.044769] Mirror/redirect action on
<6>[    6.141161] u32 classifier
<6>[    6.143986]     input device check on
<6>[    6.147693]     Actions configured
<6>[    6.239795] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
<6>[    6.260517] Loading modules backported from Linux version v4.19.23-0-g67d52fae61c1
<6>[    6.268272] Backport generated by backports.git v4.19.23-1-0-g480a925a
<6>[    6.488990] xt_time: kernel timezone is -0000
<6>[    6.514755] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    6.566528] mt76_wmac 10300000.wmac: ASIC revision: 76280001
<6>[    7.593554] mt76_wmac 10300000.wmac: Firmware Version: 20151201
<6>[    7.599575] mt76_wmac 10300000.wmac: Build Time: 20151201183641
<6>[    7.621350] mt76_wmac 10300000.wmac: firmware init done
<6>[    7.728549] rt3050-esw 10110000.esw: link changed 0x01
<7>[    7.792147] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<14>[    7.802137] kmodloader: done loading kernel modules from /etc/modules.d/*
<4>[    9.177342] urandom_read: 6 callbacks suppressed
<5>[    9.177353] random: jshn: uninitialized urandom read (4 bytes read)
<6>[   11.971477] rt3050-esw 10110000.esw: link changed 0x00
<6>[   15.521829] rt3050-esw 10110000.esw: link changed 0x01
<6>[   40.298153] rt3050-esw 10110000.esw: link changed 0x00
<6>[   43.783225] rt3050-esw 10110000.esw: link changed 0x01
<6>[   44.432507] device eth0 entered promiscuous mode
<6>[   50.910274] br-lan: port 1(eth0.1) entered blocking state
<6>[   50.915855] br-lan: port 1(eth0.1) entered disabled state
<6>[   50.921660] device eth0.1 entered promiscuous mode
<6>[   50.939619] br-lan: port 1(eth0.1) entered blocking state
<6>[   50.945176] br-lan: port 1(eth0.1) entered forwarding state
<6>[   51.073380] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.080911] device eth0.1 left promiscuous mode
<6>[   51.085686] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.170750] br-lan: port 1(eth0.1) entered blocking state
<6>[   51.176313] br-lan: port 1(eth0.1) entered disabled state
<6>[   51.182108] device eth0.1 entered promiscuous mode
<6>[   51.234695] br-lan: port 1(eth0.1) entered blocking state
<6>[   51.240185] br-lan: port 1(eth0.1) entered forwarding state
<6>[   54.284409] br-lan: port 2(wlan0) entered blocking state
<6>[   54.290155] br-lan: port 2(wlan0) entered disabled state
<6>[   54.295937] device wlan0 entered promiscuous mode
<6>[   55.227079] br-lan: port 2(wlan0) entered blocking state
<6>[   55.232548] br-lan: port 2(wlan0) entered forwarding state
<6>[   65.499313] device wlan0 left promiscuous mode
<6>[   65.504001] br-lan: port 2(wlan0) entered disabled state
<6>[   67.659749] br-lan: port 2(wlan0) entered blocking state
<6>[   67.665252] br-lan: port 2(wlan0) entered disabled state
<6>[   67.670929] device wlan0 entered promiscuous mode
<6>[   67.675848] br-lan: port 2(wlan0) entered blocking state
<6>[   67.681236] br-lan: port 2(wlan0) entered forwarding state
<6>[   67.687263] br-lan: port 2(wlan0) entered disabled state
<6>[   70.171904] br-lan: port 2(wlan0) entered blocking state
<6>[   70.177326] br-lan: port 2(wlan0) entered forwarding state
<4>[   74.063128] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
<4>[   74.076565] jffs2_build_filesystem(): unlocking the mtd device... 
<4>[   74.076626] done.
<4>[   74.084920] jffs2_build_filesystem(): erasing all blocks after the end marker... 
<5>[   75.341427] random: crng init done
<4>[   89.806667] done.
<5>[   89.808667] jffs2: notice: (2808) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
<4>[   90.097054] overlayfs: upper fs does not support tmpfile.
<6>[95491.758861] device wlan0 left promiscuous mode
<6>[95491.763556] br-lan: port 2(wlan0) entered disabled state
<6>[95496.123525] br-lan: port 2(wlan0) entered blocking state
<6>[95496.128998] br-lan: port 2(wlan0) entered disabled state
<6>[95496.134779] device wlan0 entered promiscuous mode
<6>[95496.139678] br-lan: port 2(wlan0) entered blocking state
<6>[95496.145064] br-lan: port 2(wlan0) entered forwarding state
<6>[95496.151480] br-lan: port 2(wlan0) entered disabled state
<6>[95497.434477] br-lan: port 2(wlan0) entered blocking state
<6>[95497.439926] br-lan: port 2(wlan0) entered forwarding state
<6>[181891.461089] device wlan0 left promiscuous mode
<6>[181891.465866] br-lan: port 2(wlan0) entered disabled state
<6>[181895.862824] br-lan: port 2(wlan0) entered blocking state
<6>[181895.868387] br-lan: port 2(wlan0) entered disabled state
<6>[181895.874262] device wlan0 entered promiscuous mode
<6>[181897.223872] br-lan: port 2(wlan0) entered blocking state
<6>[181897.229417] br-lan: port 2(wlan0) entered forwarding state
<6>[268291.119138] device wlan0 left promiscuous mode
<6>[268291.123910] br-lan: port 2(wlan0) entered disabled state
<6>[268296.605568] br-lan: port 2(wlan0) entered blocking state
<6>[268296.611162] br-lan: port 2(wlan0) entered disabled state
<6>[268296.616932] device wlan0 entered promiscuous mode
<6>[268298.034899] br-lan: port 2(wlan0) entered blocking state
<6>[268298.040440] br-lan: port 2(wlan0) entered forwarding state
<6>[354690.783285] device wlan0 left promiscuous mode
<6>[354690.788153] br-lan: port 2(wlan0) entered disabled state
<6>[354695.110340] br-lan: port 2(wlan0) entered blocking state
<6>[354695.115924] br-lan: port 2(wlan0) entered disabled state
<6>[354695.121790] device wlan0 entered promiscuous mode
<6>[354696.496658] br-lan: port 2(wlan0) entered blocking state
<6>[354696.502208] br-lan: port 2(wlan0) entered forwarding state
<6>[441090.473174] device wlan0 left promiscuous mode
<6>[441090.478041] br-lan: port 2(wlan0) entered disabled state
<6>[441094.831626] br-lan: port 2(wlan0) entered blocking state
<6>[441094.837188] br-lan: port 2(wlan0) entered disabled state
<6>[441094.843056] device wlan0 entered promiscuous mode
<6>[441094.848063] br-lan: port 2(wlan0) entered blocking state
<6>[441094.853538] br-lan: port 2(wlan0) entered forwarding state
<6>[441094.860044] br-lan: port 2(wlan0) entered disabled state
<6>[441096.143580] br-lan: port 2(wlan0) entered blocking state
<6>[441096.149126] br-lan: port 2(wlan0) entered forwarding state
<6>[527490.172730] device wlan0 left promiscuous mode
<6>[527490.177478] br-lan: port 2(wlan0) entered disabled state
<6>[527494.541946] br-lan: port 2(wlan0) entered blocking state
<6>[527494.547517] br-lan: port 2(wlan0) entered disabled state
<6>[527494.553391] device wlan0 entered promiscuous mode
<6>[527495.938895] br-lan: port 2(wlan0) entered blocking state
<6>[527495.944394] br-lan: port 2(wlan0) entered forwarding state
<1>[592589.839671] CPU 0 Unable to handle kernel paging request at virtual address 000002c8, epc == 830af554, ra == 83082384
<4>[592589.850591] Oops[#1]:
<4>[592589.852986] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.108 #0
<4>[592589.859074] task: 803cb430 task.stack: 803c6000
<4>[592589.863748] $ 0   : 00000000 80410000 00000000 00000000
<4>[592589.869140] $ 4   : 00000000 838cbd80 00000000 00000000
<4>[592589.874531] $ 8   : 838cb1c8 82f18516 00000010 43420000
<4>[592589.879922] $12   : 087f0000 00000000 000a9a0e 00000004
<4>[592589.885312] $16   : 838cbd80 00000000 830ecbc0 830ecbc0
<4>[592589.890703] $20   : 83b61bf0 830f73ac 00000001 00000000
<4>[592589.896093] $24   : 00000010 801bcbe0                  
<4>[592589.901484] $28   : 803c6000 83807e18 830ede88 83082384
<4>[592589.906876] Hi    : 005a1ac2
<4>[592589.909878] Lo    : ef14c145
<4>[592589.912889] epc   : 830af554 0x830af554 [mac80211@83080000+0x6a240]
<4>[592589.919330] ra    : 83082384 0x83082384 [mac80211@83080000+0x6a240]
<4>[592589.925764] Status: 1100e403	KERNEL EXL IE 
<4>[592589.930096] Cause : 00800008 (ExcCode 02)
<4>[592589.934243] BadVA : 000002c8
<4>[592589.937246] PrId  : 00019655 (MIPS 24KEc)
<4>[592589.941392] Modules linked in: mt7603e mt76 mac80211 iptable_raw iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY x_tables nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_log_common nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache compat act_connmark nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ifb
<4>[592590.013247]  l2tp_ip l2tp_eth l2tp_netlink l2tp_core udp_tunnel leds_gpio gpio_button_hotplug
<4>[592590.021995] Process swapper (pid: 0, threadinfo=803c6000, task=803cb430, tls=00000000)
<4>[592590.030101] Stack : 83807e7c 0000008a 00000000 838cbd80 838cbd80 83082384 00000050 830ecbc0
<4>[592590.038670]         83b61bf0 830f73ac 830ed4e0 00000000 838cb180 00000000 00000000 830ecbc0
<4>[592590.047239]         83b61bf0 830f73ac 830ed4e0 00000001 830ecbc0 830adb78 00000cfc 0000033f
<4>[592590.055808]         8381b800 00000080 00000000 00000000 00060036 00000000 830ed4e0 83b61bf0
<4>[592590.064376]         00000004 00000003 00000006 830f73f0 83807ee0 80058f30 803dfc40 00000003
<4>[592590.072945]         ...
<4>[592590.075510] Call Trace:
<4>[592590.075556] [<83082384>] 0x83082384 [mac80211@83080000+0x6a240]
<4>[592590.084214] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.090146] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.096068] [<830adb78>] 0x830adb78 [mac80211@83080000+0x6a240]
<4>[592590.102173] [<830f73f0>] 0x830f73f0 [mt7603e@830f0000+0x87a0]
<4>[592590.108088] [<80058f30>] 0x80058f30
<4>[592590.111724] [<830b4d80>] 0x830b4d80 [mac80211@83080000+0x6a240]
<4>[592590.117809] [<80009e70>] 0x80009e70
<4>[592590.121449] [<830f7548>] 0x830f7548 [mt7603e@830f0000+0x87a0]
<4>[592590.127377] [<8002d078>] 0x8002d078
<4>[592590.130998] [<80009e70>] 0x80009e70
<4>[592590.134619] [<80351a20>] 0x80351a20
<4>[592590.138240] [<8005d978>] 0x8005d978
<4>[592590.141866] [<80058f30>] 0x80058f30
<4>[592590.145491] [<80009e70>] 0x80009e70
<4>[592590.149109] 
<4>[592590.150701] Code: 27bdffe8  afbf0014  afb00010 <8c9002c8> 8caa00a4  1080001e  8e090438  8e030044  0123402a 
<4>[592590.160690] 
<4>[592590.162335] ---[ end trace 25bbd90279e222f9 ]---

===================================
10.03.20192176KernelBug ReportMediumHighubiquiti loco xw (AR9342 Rev.2) stops receiving on wire...AllNew Task Description

This bug has been existing as long as the ubiquiti loco xw 5 ghz hardware is around, probably what we are dealing with is a hardware bug in the AR9342 Rev. 2 chip. It is somehow hard to reproduce, but it hits us reliable every couple of hours, sometimes days, running any version of OpenWrt up to todays master branch. It just happened again and this time I decided to check if the bug is actually listed on FS – in addition to creating the usual cron-job executing `iw dev wlan0 scan` every minute. There is even a watchdog in the community libremesh repository designed to catch exactly this bug:
https://github.com/libremesh/lime-packages/blob/master/packages/cotonete/Makefile#L21

So to run into it, here we got 2 ubiquiti nanobeam m5 devices running OpenWrt ar71xx/generic loco-m-xw pointing at each other over a distance of roughly 2km. This link is acceptable, but not perfect and slightly asymmetric.

Device A (worse RX SNR):

Station f0:9f:c2:xx:xx:7a (on wlan0-mesh)
	inactive time:	0 ms
	rx bytes:	1433997029
	rx packets:	8589913
	tx bytes:	23160025785
	tx packets:	15667682
	tx retries:	677924
	tx failed:	0
	rx drop misc:	30076
	signal:  	-76 [-79, -79] dBm
	signal avg:	-74 [-77, -77] dBm
	Toffset:	4887897799 us
	tx bitrate:	43.3 MBit/s MCS 10 short GI
	rx bitrate:	43.3 MBit/s MCS 4 short GI
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18117 seconds

Device B (better RX SNR)

Station fc:ec:da:xx:xx:8c (on wlan0-mesh)
	inactive time:	20 ms
	rx bytes:	23442553203
	rx packets:	16047526
	tx bytes:	1274688573
	tx packets:	8251479
	tx retries:	1337700
	tx failed:	2932
	rx drop misc:	45195
	signal:  	-72 [-79, -73] dBm
	signal avg:	-71 [-78, -73] dBm
	Toffset:	18446744068821653812 us
	tx bitrate:	57.8 MBit/s MCS 11 short GI
	rx bitrate:	43.3 MBit/s MCS 10 short GI
	last ack signal:24 dBm
	expected throughput:	24.536Mbps
	mesh llid:	0
	mesh plid:	0
	mesh plink:	ESTAB
	mesh local PS mode:	ACTIVE
	mesh peer PS mode:	ACTIVE
	mesh non-peer PS mode:	ACTIVE
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	DTIM period:	2
	beacon interval:100
	connected time:	18179 seconds

Now it so happens that device A (and always only device A!) becomes deaf after some hours of mostly sending lots of traffic to device B. It will continue to send beacons, but loose all associations. device B will keep trying setting up a link, but it keeps ending up in ‘BLOCKED’ state and dumps using a monitor mode interface show that device A simply doesn’t react at all to any of the frames send by device B. A simple `iw dev wlan0 scan` on device A (which doesn’t give any results) fixes the problem.

The channel seems rather unused otherwise and signal quality only varies by weather conditions. Interestingly this seems to happen on non-DFS channels only. And it happens on Ad-Hoc mode (unencrypted, never tried encrypted) and 802.11s (open ie. setup via `iw` tool as well as with SAE ie. running `wpa_supplicant`) equally. It doesn’t happen on all nodes, but only on those with rather bad signal or at least one far-off neighbor.

Maybe related to FS#1246

I saw this occuring on ubnt nanostation loco m5 XW as well as on all nanobeam m5 variants (which is supposedly compatible with the loco-m-xw image).

ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47

WiFi EEPROM of the devices:

*
00001000  02 02 F0 9F C2 XX XX XX  00 30 3a 31 35 3a 36 64  |.....XXX.0:15:6d|
00001010  3a 64 64 3a 64 65 3a 61  64 00 00 00 00 00 1f 00  |:dd:de:ad.......|
00001020  33 01 00 00 00 00 04 00  00 00 2d 04 03 00 08 ff  |3.........-.....|
00001030  20 01 00 00 00 20 02 00  00 cc cc 0c 00 50 01 50  | .... .......P.P|
00001040  01 50 01 00 00 00 00 00  00 21 00 a4 00 00 00 00  |.P.......!......|
00001050  ff 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001060  0e 0e 03 00 2c e2 00 02  0e 1c e0 e0 00 0c e0 e0  |....,...........|
00001070  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00001080  00 00 00 00 00 00 00 00  00 00 70 89 ac 00 00 00  |..........p.....|
00001090  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000010c0  00 00 00 70 ac 70 89 ac  70 89 ac 70 89 ac 22 22  |...p.p..p..p..""|
000010d0  22 22 22 22 22 22 22 22  20 1c 22 22 20 1c 22 22  |"""""""" ."" .""|
000010e0  20 1c 24 24 20 18 16 14  20 16 14 12 20 20 1c 14  | .$$ ... ...  ..|
000010f0  24 24 20 18 16 14 20 16  14 12 20 20 1c 14 24 24  |$$ ... ...  ..$$|
00001100  20 18 16 14 20 16 14 12  20 20 1c 14 22 22 1e 16  | ... ...  ..""..|
00001110  14 12 1e 14 12 10 20 20  1c 14 22 22 1e 16 14 12  |......  ..""....|
00001120  1e 14 12 10 20 20 1c 14  22 22 1e 16 14 12 1e 14  |....  ..""......|
00001130  12 10 20 20 1c 14 11 12  15 17 41 42 45 47 31 32  |..  ......ABEG12|
00001140  35 37 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |57pu..pu..pu..pu|
00001150  ac b8 70 75 ac b8 70 75  ac b8 70 75 ac b8 70 75  |..pu..pu..pu..pu|
*
00001170  ac b8 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |..<|<|<|<|<|<|<||
00001180  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
000011a0  3c 7c 10 01 00 00 22 22  02 00 00 00 00 00 00 00  |<|....""........|
000011b0  00 00 00 00 00 00 44 00  00 00 00 00 00 ff 00 00  |......D.........|
000011c0  00 00 00 00 00 00 00 00  00 00 00 00 ff 0e 0e 03  |................|
000011d0  00 2d e2 00 02 0e 1c 00  00 00 00 00 00 00 00 00  |.-..............|
000011e0  00 00 00 00 00 00 00 00  00 44 44 00 00 00 00 00  |.........DD.....|
000011f0  00 00 00 00 00 00 00 4c  58 68 8c a4 b4 bd cd d9  |.......LXh......|
00001200  00 89 00 00 00 dc 00 89  00 00 00 e0 00 8a 00 00  |................|
00001210  00 e2 00 8b 00 00 00 de  00 8b 00 00 00 de 00 8b  |................|
00001220  00 00 00 dc 00 89 00 00  00 da 00 8b 00 00 00 e0  |................|
00001230  00 89 00 00 00 e4 00 8a  00 00 00 e7 00 8b 00 00  |................|
00001240  00 e6 00 8b 00 00 00 e2  00 8c 00 00 00 e1 00 8c  |................|
00001250  00 00 00 df 00 8b 00 00  00 dd 00 8b 00 00 00 00  |................|
00001260  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00001280  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 4c  |...............L|
00001290  54 68 78 8c a0 b4 c5 4c  54 68 78 8c a0 b4 c5 4c  |Thx....LThx....L|
000012a0  54 68 78 8c a0 b4 c5 26  20 1e 1c 26 20 1e 1c 26  |Thx....& ..& ..&|
000012b0  20 1e 1c 26 20 1e 1c 26  20 1e 1c 26 20 1e 1c 26  | ..& ..& ..& ..&|
000012c0  20 1e 1c 26 20 1e 1c 26  22 20 1e 1c 1a 20 1e 1c  | ..& ..&" ... ..|
000012d0  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
000012e0  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
000012f0  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001300  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001310  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001320  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
00001330  1e 1c 1a 00 00 00 00 26  22 20 1e 1c 1a 20 1e 1c  |.......&" ... ..|
00001340  1a 00 00 00 00 26 22 20  1e 1c 1a 20 1e 1c 1a 00  |.....&" ... ....|
00001350  00 00 00 26 22 20 1e 1c  1a 20 1e 1c 1a 00 00 00  |...&" ... ......|
00001360  00 26 22 20 1e 1c 1a 20  1e 1c 1a 00 00 00 00 26  |.&" ... .......&|
00001370  22 20 1e 1c 1a 20 1e 1c  1a 00 00 00 00 26 22 20  |" ... .......&" |
00001380  1e 1c 1a 20 1e 1c 1a 00  00 00 00 26 22 20 1e 1c  |... .......&" ..|
00001390  1a 20 1e 1c 1a 00 00 00  00 26 22 20 1e 1c 1a 20  |. .......&" ... |
000013a0  1e 1c 1a 00 00 00 00 10  16 18 40 46 48 30 36 38  |..........@FH068|
000013b0  4c 54 68 78 8c a0 b9 cd  4c 54 68 78 8c a0 b9 cd  |LThx....LThx....|
*
000013f0  4c 54 68 78 8c a0 b9 cd  3c 7c 3c 7c 3c 7c 3c 7c  |LThx....<|<|<|<||
00001400  3c 7c 3c 7c 3c 7c 3c 7c  3c 7c 3c 7c 3c 7c 3c 7c  |<|<|<|<|<|<|<|<||
*
00001440  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
18.11.20181958PackagesBug ReportMediumLowuqmi: unicode characters in SMS confuse uqmiTrunkNew Task Description

When using uqmi –get-message the message ends up truncated in case it contains unicode characters like german umlauts.

07.09.20181837Base systemBug ReportMediumMediumKernel oops when using wireguard and mangle/fwmarkopenwrt-19.07New Task Description

On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Ethernet interface being the head-unit connected to a VLAN switch.

Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664463] INFO: rcu_sched self-detected stall on CPU
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.664907] 	1-...: (5999 ticks this GP) idle=9ee/140000000000001/0 softirq=961867/961867 fqs=2711
Fri Sep  7 18:13:18 2018 kern.err kernel: [24612.665571] 	 (t=6000 jiffies g=358062 c=358061 q=4475)
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.665986] NMI backtrace for cpu 1
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666301] CPU: 1 PID: 14102 Comm: kworker/1:0 Not tainted 4.14.63 #0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.666775] Hardware name: XXXXXXXXXX
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667240] Workqueue: wg-crypt-XXXXX 0xffffffffa01dbab0 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.667891] Call Trace:
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668145]  <IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668372]  0xffffffff8159c6d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668662]  0xffffffff815a0000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.668950]  ? 0xffffffff810418d0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669251]  0xffffffff815a0060
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669544]  0xffffffff81041924
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.669836]  0xffffffff810c22e3
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670128]  0xffffffff810c176f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670421]  ? 0xffffffff8109fe35
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.670720]  ? 0xffffffff810a0062
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671020]  0xffffffff810c432a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671309]  0xffffffff810d0f5e
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671599]  0xffffffff810c4c4f
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.671892]  0xffffffff810c4df6
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672182]  0xffffffff81602392
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672473]  0xffffffff81601a61
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672760]  </IRQ>
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.672994] RIP: 0010:0xffffffff814e7682
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673327] RSP: 0018:ffffc90000cb3a30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.673912] RAX: 00000000000001f8 RBX: ffffc90000cb3af8 RCX: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674426] RDX: ffff880077923e00 RSI: 00000000deb48eb9 RDI: ffff88007aa28e68
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.674944] RBP: ffffc90000cb3a80 R08: 0000000000000000 R09: 0000000000000000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675456] R10: ffff88007aa28e00 R11: 0000000000000001 R12: ffff880077923e00
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.675966] R13: ffffc90000cb3a90 R14: ffff8800786e3a00 R15: ffff88007a360000
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676484]  0xffffffff814e7a0a
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.676773]  0xffffffff814e7d89
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677065]  0xffffffff81532536
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677359]  0xffffffffa01800a7 [iptable_mangle@ffffffffa0180000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.677845]  0xffffffff814e2966
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678137]  0xffffffff814ed868
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678430]  ? 0xffffffff814ebed0
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.678725]  0xffffffff814ed897
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679014]  0xffffffff8152b6bb
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679309]  0xffffffffa002145e [udp_tunnel@ffffffffa0021000+0x3000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.679786]  0xffffffffa01ddf81 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680256]  ? 0xffffffff811038aa
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680555]  ? 0xffffffff810c5454
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.680854]  0xffffffffa01dbb5a [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681321]  0xffffffff81091cf4
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681613]  0xffffffff8109204b
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.681903]  0xffffffff81096d42
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682191]  ? 0xffffffff81091e40
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682487]  ? 0xffffffff81096c30
Fri Sep  7 18:13:18 2018 kern.warn kernel: [24612.682788]  0xffffffff816001ef

Bootlog:

[    0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Wed Aug 15 20:42:39 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f1b2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f1b3000-0x000000007f1fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f1fb000-0x000000007f314fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f315000-0x000000007f324fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f325000-0x000000007f33bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f344000-0x000000007f358fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f359000-0x000000007f359fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f35a000-0x000000007f377fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f378000-0x000000007f37bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f37c000-0x000000007f38afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f38b000-0x000000007f39bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39c000-0x000000007f39dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f39e000-0x000000007f39efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f39f000-0x000000007f3ccfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f3cd000-0x000000007f40ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f410000-0x000000007f58efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f6e5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f6e6000-0x000000007f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Medion E1230/E1230, BIOS 208 02/10/2012
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 write-through
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffffffffff400d10]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[    0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[    0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[    0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[    0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[    0.000000] BRK [0x01e0c000, 0x01e0cfff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MEDION)
[    0.000000] ACPI: XSDT 0x000000007F315070 00005C (v01 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007F3236E8 0000F4 (v04 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007F315158 00E58C (v02 MEDION MEDIONAG 00000001 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000007F390F80 000040
[    0.000000] ACPI: APIC 0x000000007F3237E0 000072 (v03 MEDION MEDIONAG 00000001 AMI  00010013)
[    0.000000] ACPI: SLIC 0x000000007F323858 000176 (v01 MEDION MEDIONAG 00000001 MSFT 00000001)
[    0.000000] ACPI: ECDT 0x000000007F3239D0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x000000007F323A98 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007F323AD8 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x000000007F323B10 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6effff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f1b2fff]
[    0.000000]   node   0: [mem 0x000000007f410000-0x000000007f58efff]
[    0.000000]   node   0: [mem 0x000000007f6e6000-0x000000007f6effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[    0.000000] On node 0 totalpages: 520921
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 516924 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] random: get_random_bytes called from 0xffffffff81cb0b09 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff88007ee00000 s132056 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s132056 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 512744
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2032612K/2083684K available (8200K kernel code, 527K rwdata, 1312K rodata, 1052K init, 420K bss, 51072K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.040000] tsc: Unable to calibrate against PIT
[    0.040000] tsc: using HPET reference calibration
[    0.040000] tsc: Detected 1595.996 MHz processor
[    0.040000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=15959960)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] ACPI: Core revision 20170728
[    0.068326] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.070105] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.070601] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.071425] Disabled fast string operations
[    0.071787] mce: CPU supports 5 MCE banks
[    0.072125] process: using mwait in idle threads
[    0.072500] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.072914] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.073530] Freeing SMP alternatives memory: 28K
[    0.080265] smpboot: Max logical packages: 2
[    0.081106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.190000] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.190000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.190000] ... version:                3
[    0.190000] ... bit width:              40
[    0.190000] ... generic registers:      2
[    0.190000] ... value mask:             000000ffffffffff
[    0.190000] ... max period:             000000007fffffff
[    0.190000] ... fixed-purpose events:   3
[    0.190000] ... event mask:             0000000700000003
[    0.190000] Hierarchical SRCU implementation.
[    0.190000] smp: Bringing up secondary CPUs ...
[    0.190000] x86: Booting SMP configuration:
[    0.190000] .... node  #0, CPUs:      #1
[    0.010000] Disabled fast string operations
[    0.190000]  #2
[    0.010000] Disabled fast string operations
[    0.190386]  #3
[    0.010000] Disabled fast string operations
[    0.193013] smp: Brought up 1 node, 4 CPUs
[    0.193365] smpboot: Total of 4 processors activated (12767.96 BogoMIPS)
[    0.195434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196180] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.197097] NET: Registered protocol family 16
[    0.198390] cpuidle: using governor ladder
[    0.198390] ACPI: bus type PCI registered
[    0.198390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.200004] PCI: Using configuration type 1 for base access
[    0.217580] ACPI: Added _OSI(Module Device)
[    0.217940] ACPI: Added _OSI(Processor Device)
[    0.218293] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218673] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219086] ACPI: EC: EC started
[    0.219370] ACPI: EC: interrupt blocked
[    0.222270] ACPI: \: Used as first EC
[    0.222591] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.223021] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.223763] ACPI: Executed 1 blocks of module-level executable AML code
[    0.240673] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.242268] ACPI: Dynamic OEM Table Load:
[    0.242613] ACPI: SSDT 0xFFFF88007BD5D800 0002E9 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.246636] ACPI: Dynamic OEM Table Load:
[    0.247070] ACPI: SSDT 0xFFFF88007BC81000 0006DB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.254189] ACPI: Dynamic OEM Table Load:
[    0.256660] ACPI: SSDT 0xFFFF88007C6CB000 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.257695] ACPI: Dynamic OEM Table Load:
[    0.260047] ACPI: SSDT 0xFFFF88007C7DE540 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.264783] ACPI: Interpreter enabled
[    0.265199] ACPI: (supports S0 S5)
[    0.265579] ACPI: Using IOAPIC for interrupt routing
[    0.268058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270580] ACPI: GPE 0x02 active on init
[    0.272964] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.305839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305839] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[    0.305839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.306311] PCI host bridge to bus 0000:00
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306311] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[    0.306311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.306311] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306721] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[    0.310006] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[    0.310006] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[    0.310006] pci 0000:00:02.0: reg 0x14: [io  0xf100-0xf107]
[    0.315634] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.315634] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[    0.315634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.315960] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.315960] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.316454] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.316454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.316867] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.316867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.317285] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.317285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.317706] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.317706] pci 0000:00:1d.0: reg 0x20: [io  0xf0a0-0xf0bf]
[    0.318128] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.318128] pci 0000:00:1d.1: reg 0x20: [io  0xf080-0xf09f]
[    0.318515] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.318515] pci 0000:00:1d.2: reg 0x20: [io  0xf060-0xf07f]
[    0.318938] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.318938] pci 0000:00:1d.3: reg 0x20: [io  0xf040-0xf05f]
[    0.319336] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.319336] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[    0.319336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.320072] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.320513] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.323112] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.323112] pci 0000:00:1f.2: reg 0x10: [io  0xf0f0-0xf0f7]
[    0.323112] pci 0000:00:1f.2: reg 0x14: [io  0xf0e0-0xf0e3]
[    0.323112] pci 0000:00:1f.2: reg 0x18: [io  0xf0d0-0xf0d7]
[    0.323112] pci 0000:00:1f.2: reg 0x1c: [io  0xf0c0-0xf0c3]
[    0.323112] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf02f]
[    0.323112] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[    0.323112] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.323324] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.324155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.324284] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[    0.324284] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x18: [mem 0xdfe11000-0xdfe11fff 64bit]
[    0.324284] pci 0000:02:00.0: reg 0x20: [mem 0xdfe10000-0xdfe10fff 64bit]
[    0.324284] pci 0000:02:00.0: supports D1
[    0.324284] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.324922] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.330068] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.330359] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.330469] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.330614] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[    0.332600] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[    0.333006] pci 0000:03:00.0: supports D1 D2
[    0.333011] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.333210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.333620] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.333630] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.333927] pci 0000:04:00.0: [8086:0896] type 00 class 0x028000
[    0.334057] pci 0000:04:00.0: reg 0x10: [mem 0xdfc00000-0xdfc01fff 64bit]
[    0.334763] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.334942] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.335350] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.335528] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.336039] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.336044] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336049] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336053] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.336057] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.336062] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.336066] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[    0.336070] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.336130] pci_bus 0000:00: on NUMA node 0
[    0.337515] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.338262] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.338262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.340011] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.340011] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.346039] ACPI: EC: interrupt unblocked
[    0.346039] ACPI: EC: event unblocked
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.348684] SCSI subsystem initialized
[    0.349211] libata version 3.00 loaded.
[    0.349211] ACPI: bus type USB registered
[    0.349789] usbcore: registered new interface driver usbfs
[    0.350039] usbcore: registered new interface driver hub
[    0.350749] usbcore: registered new device driver usb
[    0.351384] PCI: Using ACPI for IRQ routing
[    0.351384] PCI: pci_cache_line_size set to 64 bytes
[    0.351384] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f1b3000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f58f000-0x7fffffff]
[    0.351384] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[    0.352856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.353253] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.355766] clocksource: Switched to clocksource hpet
[    0.356312] pnp: PnP ACPI init
[    0.357109] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.357615] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.357767] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.358214] system 00:01: [io  0x1000-0x1003] has been reserved
[    0.358667] system 00:01: [io  0x1010-0x101f] has been reserved
[    0.359103] system 00:01: [io  0xffff] has been reserved
[    0.359513] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.359952] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.359952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:02: [io  0x06a0-0x06af] has been reserved
[    0.359952] system 00:02: [io  0x06b0-0x06ff] has been reserved
[    0.359952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.359952] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.359952] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.359952] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.359952] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.359952] system 00:06: [io  0x025d] has been reserved
[    0.359952] system 00:06: [io  0x025c] has been reserved
[    0.359952] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.360167] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.360645] system 00:06: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.361121] system 00:06: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.361592] system 00:06: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.362072] system 00:06: [mem 0xfec28000-0xfec2ffff] has been reserved
[    0.362553] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.363064] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.363263] pnp 00:07: Plug and Play ACPI device, IDs SYN1d1b SYN1d00 SYN0002 PNP0f13 (active)
[    0.363394] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.363524] system 00:09: [io  0x0240-0x0259] has been reserved
[    0.363991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.364879] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[    0.365372] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.365873] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.366363] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.366857] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367408] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.367898] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.368395] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.368805] system 00:0c: [io  0x0400-0x047f] has been reserved
[    0.369252] system 00:0c: [io  0x0500-0x053f] has been reserved
[    0.369693] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.370228] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.370705] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.371182] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.371676] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[    0.372171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372179] pnp: PnP ACPI: found 13 devices
[    0.380957] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.381648] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.381656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.381662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.381681] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.381688] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.381708] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.381726] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.381733] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.381781] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.382273] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.382870] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.383462] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.384060] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.384646] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.385095] pci 0000:00:1c.1: BAR 7: assigned [io  0x3000-0x3fff]
[    0.385545] pci 0000:00:1c.3: BAR 7: assigned [io  0x4000-0x4fff]
[    0.385998] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.386387] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.386830] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.387314] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.387902] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.388285] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.388736] pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.389226] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.389817] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.390233] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.390690] pci 0000:00:1c.2:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.391180] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.391775] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.392157] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.392608] pci 0000:00:1c.3:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.393098] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.393700] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.394103] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.394108] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.394113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394122] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394126] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394131] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394135] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394140] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.394144] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.394149] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.394153] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.394158] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.394162] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.394166] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.394171] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.394175] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.394179] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.394184] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.394188] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.394193] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.394197] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.394202] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394206] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.394210] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[    0.394215] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.394219] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.394224] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.394458] NET: Registered protocol family 2
[    0.395149] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.395801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.396424] TCP: Hash tables configured (established 16384 bind 16384)
[    0.397028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.397512] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.398146] NET: Registered protocol family 1
[    0.398540] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.401674] PCI: CLS 64 bytes, default 64
[    0.404203] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    0.408673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.411230] io scheduler noop registered
[    0.411556] io scheduler deadline registered (default)
[    0.412180] gpio_it87: Unknown Chip found, Chip 0202 Revision 2
[    0.413720] hv_vmbus: registering driver hv_pci
[    0.414138] hv_vmbus: registering driver hyperv_fb
[    0.414552] intel_idle: MWAIT substates: 0x3020220
[    0.414554] intel_idle: v0.4.1 model 0x36
[    0.415019] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.415333] ACPI: AC Adapter [AC0] (on-line)
[    0.440589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.470262] ACPI: Lid Switch [LID]
[    0.470749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.471442] ACPI: Sleep Button [SLPB]
[    0.471890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.472528] ACPI: Power Button [PWRF]
[    0.474911] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.475996] thermal LNXTHERM:00: registered as thermal_zone0
[    0.476418] ACPI: Thermal Zone [THRM] (63 C)
[    0.477238] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.480090] Non-volatile memory driver v1.3
[    0.483829] loop: module loaded
[    0.484309] Guest personality initialized and is inactive
[    0.484904] VMCI host device registered (name=vmci, major=10, minor=63)
[    0.485403] Initialized host personality
[    0.485993] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[    0.487067] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[    0.488126] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170728/utaddress-247)
[    0.489188] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20170728/utaddress-247)
[    0.490317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.VGA.TCOI) (20170728/utaddress-247)
[    0.491442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.492164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.493231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.495362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.496081] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[    0.497151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[    0.498214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.498935] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.499659] VMware PVSCSI driver - version 1.0.7.0-k
[    0.500186] hv_vmbus: registering driver hv_storvsc
[    0.500738] ahci 0000:00:1f.2: version 3.0
[    0.501106] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.501649] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.502258] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
[    0.504418] scsi host0: ahci
[    0.505055] scsi host1: ahci
[    0.505678] scsi host2: ahci
[    0.506330] scsi host3: ahci
[    0.506778] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[    0.507357] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[    0.507918] ata3: DUMMY
[    0.508159] ata4: DUMMY
[    0.508915] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[    0.509469] hv_vmbus: registering driver hv_netvsc
[    0.509854] Fusion MPT base driver 3.04.20
[    0.510250] Copyright (c) 1999-2008 LSI Corporation
[    0.510709] Fusion MPT SPI Host driver 3.04.20
[    0.511120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.511607] ehci-pci: EHCI PCI platform driver
[    0.512763] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.513192] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.513793] ehci-pci 0000:00:1d.7: debug port 1
[    0.514113] ACPI: Battery Slot [BAT0] (battery present)
[    0.518488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.518522] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[    0.540123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.541063] hub 1-0:1.0: USB hub found
[    0.541418] hub 1-0:1.0: 8 ports detected
[    0.542734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.543221] ohci-pci: OHCI PCI platform driver
[    0.543620] ohci-platform: OHCI generic platform driver
[    0.544568] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.544990] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.546233] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010
[    0.547982] hub 2-0:1.0: USB hub found
[    0.548435] hub 2-0:1.0: 2 ports detected
[    0.549241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.549668] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.550303] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    0.550935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.551899] hub 3-0:1.0: USB hub found
[    0.552349] hub 3-0:1.0: 2 ports detected
[    0.553301] usbcore: registered new interface driver usb-storage
[    0.553955] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.556563] i8042: Detected active multiplexing controller, rev 1.1
[    0.559170] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.559568] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.559965] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.560407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.560808] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.561255] hv_vmbus: registering driver hyperv_keyboard
[    0.561774] rtc_cmos 00:03: RTC can wake from S4
[    0.562370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.562869] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.564393] sdhci: Secure Digital Host Controller Interface driver
[    0.564865] sdhci: Copyright(c) Pierre Ossman
[    0.566006] hidraw: raw HID events driver (C) Jiri Kosina
[    0.566486] hv_vmbus: registering driver hid_hyperv
[    0.566915] usbcore: registered new interface driver usbhid
[    0.567337] usbhid: USB HID core driver
[    0.567684] hv_utils: Registering HyperV Utility Driver
[    0.568088] hv_vmbus: registering driver hv_util
[    0.568454] hv_vmbus: registering driver hv_balloon
[    0.569382] NET: Registered protocol family 10
[    0.570351] Segment Routing with IPv6
[    0.570715] NET: Registered protocol family 17
[    0.571097] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.571999] 8021q: 802.1Q VLAN Support v1.8
[    0.572509] NET: Registered protocol family 40
[    0.573685] microcode: sig=0x30661, pf=0x8, revision=0x10c
[    0.574234] microcode: Microcode Update Driver: v2.2.
[    0.574273] sched_clock: Marking stable (573441123, 0)->(657968060, -84526937)
[    0.575503] registered taskstats version 1
[    0.576740] rtc_cmos 00:03: setting system clock to 2018-09-07 16:15:12 UTC (1536336912)
[    0.584900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.831528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.834278] ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
[    0.834837] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.837583] ata1.00: configured for UDMA/133
[    0.838642] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5
[    0.841240] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.841885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.842433] sd 0:0:0:0: [sda] Write Protect is off
[    0.842862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.843052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.877982]  sda: sda1 sda2
[    0.880409] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.171549] ata2: SATA link down (SStatus 0 SControl 300)
[    1.186977] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[    1.194364] Freeing unused kernel memory: 1052K
[    1.230632] Write protecting the kernel read-only data: 12288k
[    1.235448] Freeing unused kernel memory: 2024K
[    1.252890] Freeing unused kernel memory: 736K
[    1.487895] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[    1.488460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[    1.566812] init: Console is alive
[    1.796421] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    1.821964] pps_core: LinuxPPS API ver. 1 registered
[    1.822364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.823647] PTP clock support registered
[    1.824343] Button Hotplug driver version 0.4.1
[    1.824818] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    1.830753] init: - preinit -
[    1.890124] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.267747] random: jshn: uninitialized urandom read (4 bytes read)
[    2.309827] random: jshn: uninitialized urandom read (4 bytes read)
[    2.316834] random: jshn: uninitialized urandom read (4 bytes read)
[    2.470351] usb 1-7: new high-speed USB device number 4 using ehci-pci
[    2.490506] clocksource: Switched to clocksource tsc
[    2.691721] usb-storage 1-7:1.0: USB Mass Storage device detected
[    2.692832] scsi host4: usb-storage 1-7:1.0
[    3.754161] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.765748] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.433172] urandom_read: 5 callbacks suppressed
[    5.433177] random: jshn: uninitialized urandom read (4 bytes read)
[    5.722679] F2FS-fs (loop0): Mounted with checkpoint version = 1a030d9d
[    5.751832] mount_root: switching to f2fs overlay
[    5.833723] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    5.839672] urandom-seed: Seeding with /etc/urandom.seed
[    5.914891] procd: - early -
[    6.557234] procd: - ubus -
[    6.596946] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.610617] procd: - init -
[    6.950178] kmodloader: loading kernel modules from /etc/modules.d/*
[    6.954303] tun: Universal TUN/TAP device driver, 1.6
[    6.958028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.958547] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.961325] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    6.961834] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.964069] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.426558] Netfilter messages via NETLINK v0.30.
[    7.428839] ip_set: protocol 6
[    7.450984] i2c /dev entries driver
[    7.487885] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    7.488578] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    7.492106] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.492562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.494282] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.898600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.147745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.149259] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000000b000, e8:40:f2:3f:a9:58, XID 00a00000 IRQ 30
[    8.154185] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[    8.155901] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    8.174092] xt_time: kernel timezone is -0000
[    8.411155] Intel(R) Wireless WiFi driver for Linux
[    8.411610] Copyright(c) 2003- 2015 Intel Corporation
[    8.445655] PPP generic driver version 2.4.2
[    8.447497] NET: Registered protocol family 24
[    8.454488] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    8.455168] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUG disabled
[    8.455610] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
[    8.456054] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
[    8.456529] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[    8.501089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.504079] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.792405] r8169 0000:03:00.0 eth0: link down
[   11.792453] r8169 0000:03:00.0 eth0: link down
[   11.903937] random: fast init done
[   13.415479] r8169 0000:03:00.0 eth0: link up
[   30.131354] random: crng init done
08.04.2017692Base systemBug ReportMediumMediumWLAN AP not working on RasPi (bcm2710 target)TrunkAssigned Task Description

When flashing the brcm2708 / bcm2710 target the WiFi interface gets stuck in “client mode” and the AP will not be able to be brought up.

Some screenshots and a load of discussion here:
https://forum.lede-project.org/t/ap-mode-radio0-in-raspi-3-always-acts-as-a-client-shows-as-wlan0-in-luci/2885

Two more days of tinkering, wifi-up’ing and -down’ing did not bring me further.
I flashed another Pi3 (to exclude a hardware defect) with the same result.

I tried latest snapshot and stable images.
I am happy to help debug – tell me what you need me to do.

Greetings,
–Thomas

17.03.2017634Base systemBug ReportMediumMediumFactory flashing fails because LEDE filename is too lon...AllNew Task Description

On a TP-Link TL-WR841N v11, flashing LEDE from the web interface of the stock firmware is not possible.

This is caused by a stupid check that refuses filename longer than 64 chars in the web interface. The check is implemented in javascript and returns a cryptic error message like “Please select a file to upload”, as if no file was selected.

The current naming scheme is quite long:

$ echo ‘lede-17.01.0-r3205-59508e3-ar71xx-generic-tl-wr841-v11-squashfs-factory-eu.bin’ | wc -c
79

Shortening the name like the following would decrease the length below 64 chars, and leave some space for a custom suffix (e.g. using EXTRA_IMAGE_NAME in the Imagebuilder):

$ echo ‘lede-17.01.0-ar71xx-tlwr841v11-squashfs-factory-eu.bin’ | wc -c
55

17.01.2017395Base systemBug ReportMediumLowmac80211.sh: detect_mac80211 should check available cha...TrunkNew Task Description

This problem was reported by few Netgear R8000 users and I managed to reproduce it. It’s related to the following code:

		vht_cap=$(iw phy "$dev" info | grep -c 'VHT Capabilities')
		cap_5ghz=$(iw phy "$dev" info | grep -c "Band 2")
		[ "$vht_cap" -gt 0 -a "$cap_5ghz" -gt 0 ] && {
			mode_band="a";
			channel="36"
			htmode="VHT80"
		}

Default htmode

The first problem is that even if hardware supports VHT80 it may be not available for every/any current channel. If channel 36 doesn’t support VHT80, for better user experience, it shouldn’t be set in /etc/config/wireless by default. Example:

root@lede:/# iw phy phy2 info
Wiphy phy2
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports roaming.
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 2:
                Capabilities: 0x1062
                        HT20/HT40
                        Static SM Power Save
                        RX HT20 SGI
                        RX HT40 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-23
                VHT Capabilities (0x0c025820):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        short GI (80 MHz)
                        SU Beamformer
                        SU Beamformee
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Frequencies:
                        * 5170 MHz [34] (disabled)
                        * 5180 MHz [36] (20.0 dBm)
                        * 5190 MHz [38] (disabled)
                        * 5200 MHz [40] (20.0 dBm)
                        * 5210 MHz [42] (disabled)
                        * 5220 MHz [44] (20.0 dBm)
                        * 5230 MHz [46] (disabled)
                        * 5240 MHz [48] (20.0 dBm)
                        * 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
                        * 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
                        * 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
                        * 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
                        * 5500 MHz [100] (20.0 dBm) (no IR, radar detection)
                        * 5520 MHz [104] (20.0 dBm) (no IR, radar detection)
                        * 5540 MHz [108] (20.0 dBm) (no IR, radar detection)
                        * 5560 MHz [112] (20.0 dBm) (no IR, radar detection)
                        * 5580 MHz [116] (20.0 dBm) (no IR, radar detection)
                        * 5600 MHz [120] (20.0 dBm) (no IR, radar detection)
                        * 5620 MHz [124] (20.0 dBm) (no IR, radar detection)
                        * 5640 MHz [128] (20.0 dBm) (no IR, radar detection)
                        * 5660 MHz [132] (20.0 dBm) (no IR, radar detection)
                        * 5680 MHz [136] (20.0 dBm) (no IR, radar detection)
                        * 5700 MHz [140] (20.0 dBm) (no IR, radar detection)
                        * 5720 MHz [144] (disabled)
                        * 5745 MHz [149] (disabled)
                        * 5765 MHz [153] (disabled)
                        * 5785 MHz [157] (disabled)
                        * 5805 MHz [161] (disabled)
                        * 5825 MHz [165] (disabled)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 1
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
                 * #{ AP } <= 4,
                   total <= 4, #channels <= 1, STA/AP BI must match
root@lede:/# iw phy phy2 channels
Band 2:
        * 5170 MHz [34] (disabled)
        * 5180 MHz [36] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+
        * 5190 MHz [38] (disabled)
        * 5200 MHz [40] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40-
        * 5210 MHz [42] (disabled)
        * 5220 MHz [44] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+
        * 5230 MHz [46] (disabled)
        * 5240 MHz [48] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40-
        * 5260 MHz [52] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5280 MHz [56] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5300 MHz [60] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5320 MHz [64] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5500 MHz [100] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5520 MHz [104] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5540 MHz [108] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5560 MHz [112] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5580 MHz [116] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5600 MHz [120] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5620 MHz [124] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5640 MHz [128] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5660 MHz [132] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40+
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5680 MHz [136] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz HT40-
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5700 MHz [140] 
          Maximum TX power: 20.0 dBm
          No IR
          Radar detection
          Channel widths: 20MHz
          DFS state: usable (for 163 sec)
          DFS CAC time: 0 ms
        * 5720 MHz [144] (disabled)
        * 5745 MHz [149] (disabled)
        * 5765 MHz [153] (disabled)
        * 5785 MHz [157] (disabled)
        * 5805 MHz [161] (disabled)
        * 5825 MHz [165] (disabled)

as you can see, VHT80 isn’t support on any currently available channel due to regulatory limits.

Default channel

Picking channel 36 blindly is a bad idea as it may not be available. In case of phy0/radio0 on Netgear R8000 only available channels are 149+ due to hardware/board design (see ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000).

root@lede:/# iw phy phy0 info
Wiphy phy0
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports roaming.
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 2:
                Capabilities: 0x1062
                        HT20/HT40
                        Static SM Power Save
                        RX HT20 SGI
                        RX HT40 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-23
                VHT Capabilities (0x0c025820):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        short GI (80 MHz)
                        SU Beamformer
                        SU Beamformee
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: MCS 0-9
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Frequencies:
                        * 5170 MHz [34] (disabled)
                        * 5180 MHz [36] (disabled)
                        * 5190 MHz [38] (disabled)
                        * 5200 MHz [40] (disabled)
                        * 5210 MHz [42] (disabled)
                        * 5220 MHz [44] (disabled)
                        * 5230 MHz [46] (disabled)
                        * 5240 MHz [48] (disabled)
                        * 5260 MHz [52] (disabled)
                        * 5280 MHz [56] (disabled)
                        * 5300 MHz [60] (disabled)
                        * 5320 MHz [64] (disabled)
                        * 5500 MHz [100] (disabled)
                        * 5520 MHz [104] (disabled)
                        * 5540 MHz [108] (disabled)
                        * 5560 MHz [112] (disabled)
                        * 5580 MHz [116] (disabled)
                        * 5600 MHz [120] (disabled)
                        * 5620 MHz [124] (disabled)
                        * 5640 MHz [128] (disabled)
                        * 5660 MHz [132] (disabled)
                        * 5680 MHz [136] (disabled)
                        * 5700 MHz [140] (disabled)
                        * 5720 MHz [144] (disabled)
                        * 5745 MHz [149] (20.0 dBm)
                        * 5765 MHz [153] (20.0 dBm)
                        * 5785 MHz [157] (20.0 dBm)
                        * 5805 MHz [161] (20.0 dBm)
                        * 5825 MHz [165] (20.0 dBm)
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 1
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
                 * #{ AP } <= 4,
                   total <= 4, #channels <= 1, STA/AP BI must match
root@lede:/# iw phy phy0 channels
Band 2:
        * 5170 MHz [34] (disabled)
        * 5180 MHz [36] (disabled)
        * 5190 MHz [38] (disabled)
        * 5200 MHz [40] (disabled)
        * 5210 MHz [42] (disabled)
        * 5220 MHz [44] (disabled)
        * 5230 MHz [46] (disabled)
        * 5240 MHz [48] (disabled)
        * 5260 MHz [52] (disabled)
        * 5280 MHz [56] (disabled)
        * 5300 MHz [60] (disabled)
        * 5320 MHz [64] (disabled)
        * 5500 MHz [100] (disabled)
        * 5520 MHz [104] (disabled)
        * 5540 MHz [108] (disabled)
        * 5560 MHz [112] (disabled)
        * 5580 MHz [116] (disabled)
        * 5600 MHz [120] (disabled)
        * 5620 MHz [124] (disabled)
        * 5640 MHz [128] (disabled)
        * 5660 MHz [132] (disabled)
        * 5680 MHz [136] (disabled)
        * 5700 MHz [140] (disabled)
        * 5720 MHz [144] (disabled)
        * 5745 MHz [149] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+ VHT80
        * 5765 MHz [153] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40- VHT80
        * 5785 MHz [157] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40+ VHT80
        * 5805 MHz [161] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz HT40- VHT80
        * 5825 MHz [165] 
          Maximum TX power: 20.0 dBm
          Channel widths: 20MHz
14.10.2016227Base systemBug ReportMediumHighVLAN support mismatch between preinit and default netwo...TrunkResearching Task Description

PPPoE is broken on WRT1900ACS

Upgraded from Lede r578 to latest Lede r1814 and PPPOE doesn’t work anymore altough the pppd version and PPPoE version are the same:
- Linksys WRT1900ACS
- LEDE reboot r1814

pppd debug log:

Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Timeout waiting for PADO packets
Unable to complete PPPoE Discovery
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]

While on the same hardware running LEDE r578, the PPPoE module works as expected:

Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Recv PPPOE Discovery V1T1 PADO session 0×0 length 40
dst c2:56:27:ca:d7:d4 src a0:f3:e4:34:d8:21
[service-name] [AC-name acc-aln1.hac] [AC-cookie 75 58 37 a5 ba 3c e4 a5 2a 61 bb 23 92 5c 1b dc]
Send PPPOE Discovery V1T1 PADR session 0×0 length 24
dst a0:f3:e4:34:d8:21 src c2:56:27:ca:d7:d4
[service-name] [AC-cookie 75 58 37 a5 ba 3c e4 a5 2a 61 bb 23 92 5c 1b dc]
Recv PPPOE Discovery V1T1 PADS session 0x30b length 4
dst c2:56:27:ca:d7:d4 src a0:f3:e4:34:d8:21
[service-name]
PADS: Service-Name: ‘’ PPP session is 779
Connected to a0:f3:e4:34:d8:21 via interface eth0
using channel 2
Using interface pppoe-wan
Connect: pppoe-wan ←→ eth0
sent [LCP ConfReq id=0×1 <mru 1492> <magic 0xc6952556>]
rcvd [LCP ConfReq id=0×66 <mru 1492> <auth chap MD5> <magic 0x4cc73648>]
sent [LCP ConfAck id=0×66 <mru 1492> <auth chap MD5> <magic 0x4cc73648>]
rcvd [LCP ConfAck id=0×1 <mru 1492> <magic 0xc6952556>]
sent [LCP EchoReq id=0×0 magic=0xc6952556]
rcvd [CHAP Challenge id=0×1 <7131a44524d1de8f1cd1061cac6d8c071d8bfe7351bc4ea7bd08f56684428475f229ba177a192696ebab32>, name = “acc-aln1.hac”]
sent [CHAP Response id=0×1 <4bb1a418b298790b128ad4d7ef3109ad>, name = “bthomehub@btbroadband.com”]
rcvd [LCP EchoRep id=0×0 magic=0x4cc73648]
rcvd [CHAP Success id=0×1 “CHAP authentication success”]
CHAP authentication succeeded: CHAP authentication success
CHAP authentication succeeded
peer from calling number A0:F3:E4:34:D8:21 authorized
sent [IPCP ConfReq id=0×1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
sent [IPV6CP ConfReq id=0×1 <addr fe80::c595:37d1:3987:1929>]
rcvd [IPV6CP ConfReq id=0x7b <addr fe80::0221:05ff:feb4:8824>]
sent [IPV6CP ConfAck id=0x7b <addr fe80::0221:05ff:feb4:8824>]
rcvd [IPCP ConfReq id=0×38 <addr 172.16.12.12>]
sent [IPCP ConfAck id=0×38 <addr 172.16.12.12>]
rcvd [IPCP ConfNak id=0×1 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
sent [IPCP ConfReq id=0×2 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
rcvd [IPV6CP ConfAck id=0×1 <addr fe80::c595:37d1:3987:1929>]
local LL address fe80::c595:37d1:3987:1929
remote LL address fe80::0221:05ff:feb4:8824
Script /lib/netifd/ppp-up started (pid 2646)
rcvd [IPCP ConfAck id=0×2 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
local IP address 81.146.2.155
remote IP address 172.16.12.12
primary DNS address 81.139.57.100
secondary DNS address 81.139.56.100
ppp.log
secondary DNS address 81.139.56.100
Script /lib/netifd/ppp-up started (pid 2653)
Script /lib/netifd/ppp-up finished (pid 2646), status = 0×9 Script /lib/netifd/ppp-up finished (pid 2653), status = 0×9

17.08.201697Base systemBug ReportMediumLowdnsmasq doesn't receive updated dns servers when runnin...TrunkNew Task Description

Bind-mounting /tmp/resolv.conf.auto apparently doesn’t forward inotify events arriving from the kernel when resolv.conf.auto was changed (e.g. upstream DNS servers were received by a DHCP client or pppd). Restarting dnsmasq or running it without ujail solves the issue.

13.07.201650Base systemBug ReportMediumLowNo image or non-verbose output created if image is too ...TrunkNew Task Description

The target/install target does not produce the *squashfs-factory.bin and *squashfs-sysupgrade.bin binaries if the images are too big to fit the selected flash size.
However, make doesn’t say a word to the user but simply does not produce the files. The user has to either check the mtime of the files if they were created earlier or use

make target/install V=s

to derive what’s wrong.
According to jow on IRC this is just an artifact of no way to bypass silent mode. That might be the common explanation but it is still a bug from my POV.

10.07.20203221PackagesBug ReportLowLowubox: validate.c: Link-Local IPv6 with interface ID not...AllNew Task Description

validate.c uses inet_pton for identifying IPv6 addresses [1], and this seems to not understand interface identifiers as used for Link-local IPv6 addresses.

Reproduce:

root@FFF-GW-Adrian:~# /sbin/validate_data host fdff::1
host - fdff::1 = true
root@FFF-GW-Adrian:~# /sbin/validate_data host fe80::1
host - fe80::1 = true
root@FFF-GW-Adrian:~# /sbin/validate_data host fe80::1%br-mesh
host - fe80::1%br-mesh = false

This is a problem practically whenever validata_data is used to check uci values.

For example, it is not possible to use a link-local address for specifying an NTP server:

https://github.com/openwrt/openwrt/blob/master/package/utils/busybox/files/sysntpd#L33

If ‘server:list(host)’ is changed to ‘server:list(string)’ there, it obviously works fine, as it’s just the validation.

[1] https://git.openwrt.org/?p=project/ubox.git;a=blob;f=validate/validate.c;h=e72b8117ecd8b680778b0f5c7637ed6546a7736b;hb=HEAD#l402

08.05.20203073KernelBug ReportLowHighAR8337/AR8327 Flow Control Enabled on Archer C7 v5 (and...TrunkUnconfirmed Task Description

I have a TP-Link Archer C7 v5 (ath79/generic) running OpenWrt 19.07.2 r10947-65030d81f3 and periodically one of my hosts sends out a long-running flood (10/sec) of MPCP Pause frames. The AR8337 switch is configured to honor these frames on port 0 (CPU), and other ports, so stops switching frames essentially forever.

There is no way exposed to user to disable flow control.

Flow control should be turned off unless explicitly requested by the user (e.g., they are in a Datacenter/Enterprise environment and/or doing Fibre Channel over Ethernet). This is exactly the opposite of how it currently is with the added benefit that the user cannot change the behavior.

Here’s a tool that will helpfully generate MPCP Pause frames:
https://github.com/nwholloway/mpcp

You can use this to bring down your network indefinitely. Additionally, since the AR8337 switch consumes these frames you will not be able to see them from the OpenWRT host.

29.01.20202781Base systemBug ReportLowMediumArcher C50 v4 Mac80211 Looses Internet Access after 20’...openwrt-19.07New Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Problem Device:
TP-Link Archer C50 (Canadian) v4 + v4.2

Software version:
openwrt 19.07 r10860, default packages versions.

Steps to reproduce:
Setup wireless like below. I’ve intentionally left encryption set to “none” for both radio’s for quick testing but i’ve tested with WPA2 CCMP encryption with no change in results.

config wifi-device ‘radio0’ option type ‘mac80211’ option channel ‘11’ option hwmode ‘11g’ option path ‘platform/10300000.wmac’ option htmode ‘HT20’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio0’ option device ‘radio0’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

config wifi-device ‘radio1’ option type ‘mac80211’ option hwmode ‘11a’ option path ‘pci0000:00/0000:00:00.0/0000:01:00.0’ option htmode ‘VHT80’ option channel ‘112’ option legacy_rates ‘0’ option country ‘CA’

config wifi-iface ‘default_radio1’ option device ‘radio1’ option network ‘lan’ option mode ‘ap’ option ssid ‘OpenWrt’ option encryption ‘none’

Alternative Settings:

htmode ‘HT40’ No change in results
channel ‘1’, ‘6’, ‘11’ No change in results
disassoc_low_ack ‘0’ No change in results

18.06.20192328Base systemBug ReportLowMediumAllocate resources to sort out odhcpd/dnsmasq interacti...TrunkNew Task Description

As IPv6 is being adopted, increasingly people are seeing dnsmasq log ‘spam’. See https://bugs.openwrt.org/index.php?do=details&task_id=1492&string=1492&search_name=&type%5B0%5D=&sev%5B0%5D=&pri%5B0%5D=&due%5B0%5D=&reported%5B0%5D=&cat%5B0%5D=&status%5B0%5D=open&percent%5B0%5D=&opened=&dev=&closed=&duedatefrom=&duedateto=&changedfrom=&changedto=&openedfrom=&openedto=&closedfrom=&closedto=

By default under openwrt, dhcpv4 leases are handled by dnsmasq whilst dhcpv6/RA is handled by openwrt’s odhcpd.

odhcpd could handle both v4 & v6 but does not yet have the same configuration flexibility for dhcp options as dnsmasq. I guess this is why no one has been brave enough to switch to odhcpd for ipv4 operations as well as ipv6.

dnsmasq can also handle dhcpv6/RA but not quite as flexibly as odhcpd. dnsmasq will automatically find IP6 prefixes on interfaces and start handling them, whilst openwrt’s strategy with odhcpd is to only handle stuff we tell you to handle, don’t do it automagically.

As dnsmasq is the default resolver for openwrt and the wider LAN, it needs to know about DHCP/hostname allocations. For DHCPv4 this is easy, dnsmasq is controlling them. For DHCPv6 a hosts file (called a statefile in the odhcpd code) is handed to dnsmasq.

By default this host file is not read dynamically, so odhcpd has to signal dnsmasq to re-read the host file (and clear caches etc etc) upon every ipv6 lease change.

This generates a lot of log spam and process startup overhead. There are also questions about service operability during this time.

Effort needs to be put into sorting this out.

Temporary workarounds:

Use ‘hostsdir’ dnsmasq option instead of ‘addn-hosts’ - dnsmasq will dynamically scan changes/additions to hosts in hostsdir whereas addn-hosts needs a SIGHUP. Host deletions cannot be handled by this method, so odhcpd would still need to SIGHUP on lease expiry. It might reduce some of the spam.

Longer term:

Teach dnsmasq to accept hostname updates over an IPC mechanism. ubus? and carry on using odhcpd for ipv6.

Teach dnsmasq to handle ipv6 prefix additions/deletions/handling via an IPC mechanism in the same way as odhcpd. Drop odhcpd and use dnsmasq for everything.

Use odhcpd for everything and use another dns resolver that interfaces nicely with odhcpd.

Why don’t I see this problem: I use dnsmasq to handle ipv6 but I’m lucky enough that this works for me.

This needs fixing/funding to sort it out though.

03.09.2017998PackagesBug ReportLowLowpackages: "make packages/X/check" should print warnings...TrunkNew Task Description

Currently, when running “make check” on a single package, it does not print any warning. V=s is needed to see the warnings. The build system should print the warnings in all cases, because that’s what the user asks for!

To reproduce:

$ make package/nlbwmon/check 
 make[1] package/nlbwmon/check
 make[2] -C feeds/packages/net/nlbwmon check
$ make package/nlbwmon/check V=s
make[1]: Entering directory '/tmp/lede'
make[2]: Entering directory '/tmp/lede/feeds/packages/net/nlbwmon'
WARNING: nlbwmon-2017-08-02-32fc0925.tar.xz is missing, please run make download before re-running this check
make[2]: Leaving directory '/tmp/lede/feeds/packages/net/nlbwmon'
make[1]: Leaving directory '/tmp/lede'

The main target make check (without specifying any package) works fine, because it seems to run in verbose mode by default:

$ make check
make[3]: Entering directory '/tmp/lede/tools/gmp'
make[3]: Leaving directory '/tmp/lede/tools/gmp'
...
make[3]: Entering directory '/tmp/lede/package/network/utils/iwinfo'
WARNING: PKG_MIRROR_HASH is missing, set to 7bd294f50f8ec8c0497c5fbe5527f3ae098814cdfeecf4ccf78a2a8937611664
make[3]: Leaving directory '/tmp/lede/package/network/utils/iwinfo'
...

I tried to fix the issue myself but this is way above my understanding of make.

27.01.20224243Base systemBuild FailureVery LowCritical[BUILD] Failure due to recent feed system changeTrunkUnconfirmed Task Description

Recently the feed scripts were changed and the “custom” targets aren’t anymore installed on ./target/linux but instead on ./target/linux/feeds.

Due to change the Makefile of that custom target isn’t reachable, and consequently following build error:

“OpenWrt/include/kernel-version.mk:11: *** Missing kernel version/hash file for . "

Meaning the KERNEL_PATCHVER isn’t found!

 


27.01.20224242Base systemBug ReportVery LowLowerrors about udhcpc v1.34.1 TrunkUnconfirmed Task Description

udhcpc in busybox v1.34.1
I need to start two udhcpc with different interface, eth0, eth0.700
Some times I found the ip show is same:
eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:90

        inet addr:192.168.2.11  Bcast:192.168.2.255  Mask:255.255.255.0
        inet6 addr: fe80::211:22ff:fe33:4490/64 Scope:Link
        UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
        RX packets:29617 errors:0 dropped:0 overruns:0 frame:0
        TX packets:29546 errors:0 dropped:0 overruns:0 carrier:0
        collisions:0 txqueuelen:1000
        RX bytes:2795324 (2.6 MiB)  TX bytes:2756288 (2.6 MiB)
        Interrupt:45

eth0.700 Link encap:Ethernet HWaddr 00:11:22:33:44:90

        inet addr:192.168.2.11  Bcast:192.168.2.255  Mask:255.255.255.0
        inet6 addr: fe80::211:22ff:fe33:4490/64 Scope:Link
        UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
        RX packets:1493 errors:0 dropped:0 overruns:0 frame:0
        TX packets:2865 errors:0 dropped:0 overruns:0 carrier:0
        collisions:0 txqueuelen:1000
        RX bytes:105529 (103.0 KiB)  TX bytes:235432 (229.9 KiB)

in fact they should not use same ip,
because the server is configured as 192.169.3.1 for eth0,with range:192.168.3.20,192.168.3.30 for eth0
and another interface server configured as 192.168.2.1 with range:192.168.2.10-192.168.2.30 for eth0.700

from the log, it shows:
2022-01-27T07:05:11.38086 udhcpc: started, v1.34.1
2022-01-27T07:05:11.38087 udhcpc: started, v1.34.1
2022-01-27T07:05:11.49480 udhcpc: broadcasting discover
2022-01-27T07:05:11.50489 udhcpc: broadcasting discover
2022-01-27T07:05:14.58804 udhcpc: broadcasting discover
2022-01-27T07:05:14.58807 udhcpc: broadcasting discover
====2022-01-27T07:05:14.68504 udhcpc: broadcasting select for 192.168.2.11, server 192.168.2.1
2022-01-27T07:05:14.68507 udhcpc: broadcasting select for 192.168.3.21, server 192.168.3.1
2022-01-27T07:05:14.82465 udhcpc: lease of 192.168.2.11 obtained from 192.168.2.1, lease time 588
2022-01-27T07:05:14.82505 udhcpc: lease of 192.168.2.11 obtained from 192.168.3.1, lease time 588====
2022-01-27T07:05:14.83214 udhcpc: ip addr add 192.168.2.11/255.255.255.0 broadcast + dev eth0.700
2022-01-27T07:05:14.83229 udhcpc: ip addr add 192.168.2.11/255.255.255.0 broadcast + dev eth0
2022-01-27T07:10:08.68581 udhcpc: sending renew to server 192.168.3.1
2022-01-27T07:10:08.90760 udhcpc: sending renew to server 192.168.2.1
2022-01-27T07:10:08.96883 udhcpc: lease of 192.168.2.11 obtained from 192.168.2.1, lease time 600
2022-01-27T07:10:08.97304 udhcpc: ip addr add 192.168.2.11/255.255.255.0 broadcast + dev eth0.700

it can prove the server allocate a right address for each interface, but I don’t know why it bind the same address as eth0.700

seems like has memory cover issue in udhcpc.

The issue occurred in a very few probability.

The start command is :
/sbin/udhcpc -A 0 -f -S -x 0x7d:00000de9270106443845464344020c50454d323031303034343930030f354752656365697665722d48472d31 -V ,01.00.00.2180,,460008944136270,898600910920f9073973,oam 10.48.35.88,oam 2409:891f:9306:45f0:211:22ff:fe33:4492,payload 10.96.166.115,payload 2409:891e:9326:b7b5:0211:22ff:fe33:4493 -x hostname:5GFMR21 -i eth0
/sbin/udhcpc -A 0 -f -S -x 0x7d:00000de9270106443845464344020c50454d323031303034343930030f354752656365697665722d48472d31 -V ,01.00.00.2180,,460008944136270,898600910920f9073973,oam 10.48.35.88,oam 2409:891f:9306:45f0:211:22ff:fe33:4492,payload 10.96.166.115,payload 2409:891e:9326:b7b5:0211:22ff:fe33:4493 -x hostname:5GFMR21 -i eth0.700


27.01.20224241Base systemBug ReportVery LowLowMassive throughput regression with fw4 + offloading + Q...TrunkUnconfirmed Task Description

Running an Archer C6 v2 with OpenWrt SNAPSHOT r18621-af8a059bb4, enabling SQM with piece_of_cake.qos or qosify with default setting drops LAN to WAN throughput from 700+mbps down to 100-150 mbps. This means you’re forced to choose between QoS and bandwidth, which is not a great choice to make. It’s very possible that it has never worked _entirely correctly_ with fw3, but some prioritization was still visibly happening. I’m not familiar enough with the guts of the network stack to see an obvious solution, so I’m hoping someone else can help here.

25.01.20224239Base systemBug ReportVery LowMediumflow_offloading_hw doesn't work with nftables (mt7621)TrunkUnconfirmed Task Description

When enabling flow_offloading_hw on mt7621 device (Xiaomi Redmi Router AC2100 and Mikrotik RB760iGS) like this:

root@route2:~# grep flow_offload /etc/config/firewall 
	option flow_offloading '1'
	option flow_offloading_hw '1'

firewall4 fails to start:

root@route2:~# /etc/init.d/firewall start
/proc/self/fd/0:9:12-13: Error: Could not process rule: Not supported

/proc/self/fd/0:51:29-44: Error: Could not process rule: No such file or directory

nftables rules generated looks good:

root@route2:~# fw4 print > /tmp/fw4 
root@route2:~# cat /tmp/fw4 
table inet fw4
flush table inet fw4

table inet fw4 {
	#
	# Flowtable
	#

	flowtable ft {
		hook ingress priority 0;
		devices = { "br-lan" };
		flags offload;
	}

	#
	# Set definitions
	#


	#
	# Defines
	#

	define lan_devices = { "br-lan" }
	define lan_subnets = { 192.168.1.0/24, 302:f543:22c1:2921::/64 }

	#
	# User includes
	#

	include "/etc/nftables.d/*.nft"


	#
	# Filter rules
	#

	chain input {
		type filter hook input priority filter; policy accept;

		iifname "lo" accept comment "!fw4: Accept traffic from loopback"

		ct state established,related accept comment "!fw4: Allow inbound established and related flows"
		tcp flags & (fin | syn | rst | ack) == syn jump syn_flood comment "!fw4: Rate limit TCP syn packets"
		iifname "br-lan" jump input_lan comment "!fw4: Handle lan IPv4/IPv6 input traffic"
	}

	chain forward {
		type filter hook forward priority filter; policy drop;

		meta l4proto { tcp, udp } flow offload @ft;
		ct state established,related accept comment "!fw4: Allow forwarded established and related flows"
		iifname "br-lan" jump forward_lan comment "!fw4: Handle lan IPv4/IPv6 forward traffic"
		jump handle_reject
	}

	chain output {
		type filter hook output priority filter; policy accept;

		oifname "lo" accept comment "!fw4: Accept traffic towards loopback"

		ct state established,related accept comment "!fw4: Allow outbound established and related flows"
		oifname "br-lan" jump output_lan comment "!fw4: Handle lan IPv4/IPv6 output traffic"
	}

	chain handle_reject {
		meta l4proto tcp reject with tcp reset comment "!fw4: Reject TCP traffic"
		reject with icmpx type port-unreachable comment "!fw4: Reject any other traffic"
	}

	chain syn_flood {
		tcp flags & (fin | syn | rst | ack) == syn limit rate 25/second burst 50 packets return comment "!fw4: Accept SYN packets below rate-limit"
		drop comment "!fw4: Drop excess packets"
	}

	chain input_lan {
		jump accept_from_lan
	}

	chain output_lan {
		jump accept_to_lan
	}

	chain forward_lan {
		jump accept_to_wan comment "!fw4: Accept lan to wan forwarding"
		jump accept_to_lan
	}

	chain accept_from_lan {
		iifname "br-lan" counter accept comment "!fw4: accept lan IPv4/IPv6 traffic"
	}

	chain accept_to_lan {
		oifname "br-lan" counter accept comment "!fw4: accept lan IPv4/IPv6 traffic"
	}

	chain input_wan {
		meta nfproto ipv4 udp dport 68 counter accept comment "!fw4: Allow-DHCP-Renew"
		meta nfproto ipv4 icmp type 8 counter accept comment "!fw4: Allow-Ping"
		meta nfproto ipv4 meta l4proto igmp counter accept comment "!fw4: Allow-IGMP"
		ip6 saddr fc00::/6 ip6 daddr fc00::/6 udp dport 546 counter accept comment "!fw4: Allow-DHCPv6"
		ip6 saddr fe80::/10 icmpv6 type . icmpv6 code { 130 . 0, 131 . 0, 132 . 0, 143 . 0 } counter accept comment "!fw4: Allow-MLD"
		meta nfproto ipv6 icmpv6 type { 128, 129, 1, 3, 133, 134 } limit rate 1000/second counter accept comment "!fw4: Allow-ICMPv6-Input"
		meta nfproto ipv6 icmpv6 type . icmpv6 code { 2 . 0, 4 . 0, 4 . 1, 135 . 0, 136 . 0 } limit rate 1000/second counter accept comment "!fw4: Allow-ICMPv6-Input"
		jump reject_from_wan
	}

	chain output_wan {
		jump accept_to_wan
	}

	chain forward_wan {
		meta nfproto ipv6 icmpv6 type { 128, 129, 1, 3 } limit rate 1000/second counter accept comment "!fw4: Allow-ICMPv6-Forward"
		meta nfproto ipv6 icmpv6 type . icmpv6 code { 2 . 0, 4 . 0, 4 . 1 } limit rate 1000/second counter accept comment "!fw4: Allow-ICMPv6-Forward"
		meta l4proto esp counter jump accept_to_lan comment "!fw4: Allow-IPSec-ESP"
		udp dport 500 counter jump accept_to_lan comment "!fw4: Allow-ISAKMP"
		jump reject_to_wan
	}

	chain accept_to_wan {
	}

	chain reject_from_wan {
	}

	chain reject_to_wan {
	}


	#
	# NAT rules
	#

	chain dstnat {
		type nat hook prerouting priority dstnat; policy accept;
	}

	chain srcnat {
		type nat hook postrouting priority srcnat; policy accept;
	}

	chain srcnat_wan {
		meta nfproto ipv4 masquerade comment "!fw4: Masquerade IPv4 wan traffic"
	}


	#
	# Raw rules (notrack & helper)
	#

	chain raw_prerouting {
		type filter hook prerouting priority raw; policy accept;
		iifname "br-lan" jump helper_lan comment "!fw4: lan IPv4/IPv6 CT helper assignment"
	}

	chain raw_output {
		type filter hook output priority raw; policy accept;
	}

	chain helper_lan {
	}


	#
	# Mangle rules
	#

	chain mangle_prerouting {
		type filter hook prerouting priority mangle; policy accept;
	}

	chain mangle_output {
		type filter hook output priority mangle; policy accept;
	}

	chain mangle_forward {
		type filter hook forward priority mangle; policy accept;
	}
}

But for some reason nftables cannot process the rules:

root@route2:~# nft -f /tmp/fw4 -c
/tmp/fw4:9:12-13: Error: Could not process rule: Not supported
	flowtable ft {
	          ^^
/tmp/fw4:51:29-44: Error: Could not process rule: No such file or directory
		meta l4proto { tcp, udp } flow offload @ft;
		                          ^^^^^^^^^^^^^^^^

This has been tested on latest trunk version:

root@route2:~# cat /etc/openwrt_version 
r18638-ebc36ebb23

When only software flow offloading is enabled (option flow_offloading ‘1’) everything works fine (verified in /proc/net/nf_conntrack)

23.01.20224238Base systemBug ReportVery LowHighTL-WR841N v13 (SoC MT7628AN) wifi disappears after some...openwrt-21.02Unconfirmed Task Description

TP-LINK TL-WR841N v13 (SoC is MediaTek MT7628AN)
with OpenWrt 21.02.1 r16325-88151b8303

Steps:
Connect computer A via Ethernet to the router (TL-WR841N)
Connect computer B via wifi (802.11n, WPA3) to the router
At B side connect to a shared folder in A
At B side copy a very large file (in my case >200GB) from A
wait for a while, and the copy would fail (less than 5% is copied in my case)
check the wifi in B, and found that there is no wifi - even the original SSID is gone, and other computers/devices also could not find that SSID either.

I tested 3 times, and reproduced 3 times.
Pity I didn’t try this out in the original firmware (before I overwrote it with OpenWRT).

This might be the same problem reported in FS#3325.

 


23.01.20224237Base systemBug ReportVery LowLowbeagle bone black boot failedopenwrt-21.02Unconfirmed Task Description

device:beagle bone black
kernel boot failed:

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0×0 [ 0.000000] Linux version 5.4.154 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16325-88151b8303)) #0 SMP Sun Oct 24 09:01:35 2021
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x9ec00000
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon)
[ 0.000000] percpu: Embedded 15 pages/cpu s31116 r8192 d22132 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412
[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 rootwait
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 488620K/522240K available (8290K kernel code, 333K rwdata, 1528K rodata, 1024K init, 302K bss, 17236K reserved, 16384K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
[ 0.000000] random: get_random_bytes called from 0xc0b00bbc with crng_init=0
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000039] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000049] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000550] timer_probe: no matching timers found
[ 0.000681] Console: colour dummy device 80×30 [ 0.000744] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 0.089202] pid_max: default: 32768 minimum: 301
[ 0.089391] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.089406] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.090350] CPU: Testing write buffer coherency: ok
[ 0.090424] CPU0: Spectre v2: using BPIALL workaround
[ 0.090832] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.091525] Setting up static identity map for 0×80100000 - 0×80100060 [ 0.091691] rcu: Hierarchical SRCU implementation.
[ 0.092003] smp: Bringing up secondary CPUs ...
[ 0.092014] smp: Brought up 1 node, 1 CPU
[ 0.092023] SMP: Total of 1 processors activated (996.14 BogoMIPS).
[ 0.092030] CPU: All CPU(s) started in SVC mode.
[ 0.103066] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.103293] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.103318] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.104436] pinctrl core: initialized pinctrl subsystem
[ 0.105843] NET: Registered protocol family 16
[ 0.107780] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.133304] l3-aon-clkctrl:0000:0: failed to disable
[ 0.135292] cpuidle: using governor ladder
[ 0.135307] cpuidle: using governor menu
[ 0.203217] edma 49000000.edma: TI EDMA DMA engine driver
[ 0.207828] SCSI subsystem initialized
[ 0.221787] usbcore: registered new interface driver usbfs
[ 0.221866] usbcore: registered new interface driver hub
[ 0.221932] usbcore: registered new device driver usb
[ 0.222648] pps_core: LinuxPPS API ver. 1 registered
[ 0.222661] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.222688] PTP clock support registered
[ 0.222918] Advanced Linux Sound Architecture Driver Initialized.
[ 0.223024] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[ 0.227741] clocksource: Switched to clocksource timer1
[ 0.228025] VFS: Disk quotas dquot_6.6.0
[ 0.228103] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.232596] thermal_sys: Registered thermal governor ‘fair_share’ [ 0.232605] thermal_sys: Registered thermal governor ‘step_wise’ [ 0.232622] thermal_sys: Registered thermal governor ‘user_space’ [ 0.233173] NET: Registered protocol family 2
[ 0.233387] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.234015] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.234047] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.234090] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.234149] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.234249] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.234273] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.234465] NET: Registered protocol family 1
[ 0.243484] RPC: Registered named UNIX socket transport module.
[ 0.243506] RPC: Registered udp transport module.
[ 0.243512] RPC: Registered tcp transport module.
[ 0.243518] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.245642] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.256299] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.257846] NFS: Registering the id_resolver key type
[ 0.257899] Key type id_resolver registered
[ 0.257906] Key type id_legacy registered
[ 0.257960] jffs2: version 2.2 (NAND) (SUMMARY) (LZO) (LZMA) (RTIME) (RUBIN) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 0.299463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.303740] OMAP GPIO hardware version 0.1
[ 0.339587] pinctrl-single 44e10800.pinmux: 142 pins, size 568
[ 0.342721] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.345685] omap_uart 44e09000.serial: no wakeirq for uart0
[ 0.345766] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 29, base_baud = 3000000) is a OMAP UART0
[ 0.964952] printk: console [ttyO0] enabled
[ 0.984598] brd: module loaded
[ 0.991748] loop: module loaded
[ 0.996221] Loading iSCSI transport class v2.0-870.
[ 1.009284] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.017998] libphy: Fixed MDIO Bus: probed
[ 1.077692] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000
[ 1.085743] libphy: 4a101000.mdio: probed
[ 1.091425] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 1.101179] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[ 1.107865] cpsw 4a100000.ethernet: ALE Table size 1024
[ 1.113840] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies)
[ 1.121444] cpsw 4a100000.ethernet: Detected MACID = d0:39:72:18:7e:df
[ 1.130700] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.137548] ehci-omap: OMAP-EHCI Host Controller driver
[ 1.145901] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
[ 1.164143] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 1.185272] omap_rtc 44e3e000.rtc: registered as rtc0
[ 1.191456] i2c /dev entries driver
[ 1.196624] omap_wdt: OMAP Watchdog Timer Rev 0×01: initial timeout 60 sec
[ 1.206725] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)
[ 1.215938] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 1.272647] omap_hsmmc 47810000.mmc: RX DMA channel request failed
[ 1.283060] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.290000] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 1.296388] omap-aes 53500000.aes: will run requests pump with realtime priority
[ 1.306328] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 1.319478] davinci-mcasp 48038000.mcasp: IRQ common not found
[ 1.332861] NET: Registered protocol family 10
[ 1.341140] Segment Routing with IPv6
[ 1.345162] NET: Registered protocol family 17
[ 1.349962] NET: Registered protocol family 15
[ 1.354678] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.368332] 8021q: 802.1Q VLAN Support v1.8
[ 1.372756] Key type dns_resolver registered
[ 1.377329] ThumbEE CPU extension supported.
[ 1.381840] Registering SWP/SWPB emulation handler
[ 1.386859] omap_voltage_late_init: Voltage driver support not added
[ 1.393539] sr_dev_init: Unknown instance smartreflex0
[ 1.399263] SmartReflex Class3 initialized
[ 1.421174] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.433890] mmc0: new high speed SDHC card at address aaaa
[ 1.440872] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
[ 1.447431] mmcblk0: p1 p2
[ 1.460191] random: fast init done
[ 1.473464] mmc1: new high speed MMC card at address 0001
[ 1.481731] mmcblk1: mmc1:0001 MMC04G 3.60 GiB
[ 1.486778] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
[ 1.493389] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
[ 1.499783] mmcblk1rpmb: mmc1:0001 MMC04G partition 3 128 KiB, chardev (246:0)
[ 1.508096] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 1.514222] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 1.522631] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 1.529179] 8←– cut here — [ 1.532387] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[ 1.540913] pgd = (ptrval)
[ 1.543746] [00000008] *pgd=00000000
[ 1.547496] Internal error: Oops: 5 [#1] SMP ARM
[ 1.552325] Modules linked in:
[ 1.555527] CPU: 0 PID: 1108 Comm: kworker/0:3 Not tainted 5.4.154 #0
[ 1.562268] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 1.568652] Workqueue: events 0xc05aba90
[ 1.572757] PC is at 0xc06b4294
[ 1.576040] LR is at 0xc06a4968
[ 1.579325] pc : [<c06b4294>] lr : [<c06a4968>] psr: a0000013
[ 1.585884] sp : dd96dd88 ip : 00000002 fp : ffffe000
[ 1.591351] r10: c0c96ec4 r9 : c0c04f08 r8 : ddad2400
[ 1.596819] r7 : 00000000 r6 : de035040 r5 : ddad2410 r4 : de034040
[ 1.603652] r3 : ddad2210 r2 : c09ed4a0 r1 : 00000200 r0 : ddad2200
[ 1.610486] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 1.617955] Control: 10c5387d Table: 80004019 DAC: 00000051
[ 1.623967] Process kworker/0:3 (pid: 1108, stack limit = 0x(ptrval))
[ 1.630708] Stack: (0xdd96dd88 to 0xdd96e000)
[ 1.635269] dd80: c0c04f08 c06831fc de034040 c0c96ec0 de035040 c0c96ebc
[ 1.643833] dda0: ddad2400 c06a4968 00000a20 00000000 c0c971f4 dfdeea38 a0000013 ddad2410
[ 1.652395] ddc0: de27ba00 00000038 c0c96ec0 c0c96eb8 00000000 c04fb214 00000000 dfdee528
[ 1.660957] dde0: 00000000 00000001 00000001 c071214c dd488b40 dd488b40 c0c271f8 c02d48d0
[ 1.669522] de00: dd488b40 00000000 00000000 c0a35c48 00000001 c02d4a7c c0c3fbc0 00000006
[ 1.678087] de20: dda98300 c02d46fc 00000000 dd488b40 ddad05a0 ddad05a0 dd488b40 0ebe159f
[ 1.686651] de40: c0a35c48 ddad2410 00000000 c0c3fbc0 00000000 00000000 c0c3fbc0 00000006
[ 1.695216] de60: ffffe000 c05adf3c c0c9482c ddad2410 c0c94824 00000000 00000000 c05ac51c
[ 1.703780] de80: ddad2410 c0c3fbc0 c05ac9b0 00000001 00000000 00000000 00000000 c05ac800
[ 1.712344] dea0: c0c3fbc0 dd96dee8 ddad2410 00000000 dd96dee8 c05ac9b0 00000001 00000000
[ 1.720908] dec0: 00000000 00000000 ffffe000 c05aaa54 de008b6c de2e16b8 ddad2410 ddad2454
[ 1.729472] dee0: c0c37cd0 c05ac2b4 ddad2410 00000001 c0c37a54 ddad2410 ddad2410 c0c37cd0
[ 1.738035] df00: dfdc5c00 c05ab668 ddad2410 c0c37a4c c0c37a54 c05abaf8 c0c37aa0 dd8ea500
[ 1.746598] df20: dfdc29c0 c0145dd0 00000008 c0c03d00 dd8ea500 dd8ea514 dfdc29c0 00000008
[ 1.755163] df40: c0c03d00 dfdc29d8 dfdc29c0 c01462d4 c0c1de30 c092f0fc ffffe000 dd8ea500
[ 1.763727] df60: c014602c dd8e6b80 dd8e6c80 00000000 dd96c000 dd8ea500 c014602c de071eac
[ 1.772291] df80: dd8e6b9c c014b7c0 00000015 dd8e6c80 c014b674 00000000 00000000 00000000
[ 1.780854] dfa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
[ 1.789417] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.797979] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 1.806549] Function entered at [<c06b4294>] from [<c06a4968>]
[ 1.812654] Function entered at [<c06a4968>] from [<c05adf3c>]
[ 1.818759] Function entered at [<c05adf3c>] from [<c05ac51c>]
[ 1.824861] Function entered at [<c05ac51c>] from [<c05ac800>]
[ 1.830964] Function entered at [<c05ac800>] from [<c05aaa54>]
[ 1.837065] Function entered at [<c05aaa54>] from [<c05ac2b4>]
[ 1.843167] Function entered at [<c05ac2b4>] from [<c05ab668>]
[ 1.849270] Function entered at [<c05ab668>] from [<c05abaf8>]
[ 1.855372] Function entered at [<c05abaf8>] from [<c0145dd0>]
[ 1.861477] Function entered at [<c0145dd0>] from [<c01462d4>]
[ 1.867579] Function entered at [<c01462d4>] from [<c014b7c0>]
[ 1.873683] Function entered at [<c014b7c0>] from [<c01010e8>]
[ 1.879785] Exception stack(0xdd96dfb0 to 0xdd96dff8)
[ 1.885071] dfa0: 00000000 00000000 00000000 00000000
[ 1.893632] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.902193] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 1.909122] Code: e34c209e e5953024 e2430010 e5937040 (e5978008)
[ 1.915543] —[ end trace b9a3348b3cd5e5c5 ]— [ 1.920392] Kernel panic - not syncing: Fatal exception
[ 1.925869] Rebooting in 1 seconds..


23.01.20224236Base systemBug ReportVery LowLowbeagle bone black boot failedopenwrt-21.02Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 


22.01.20224235Base systemBug ReportVery LowHighlantiq FB7362SL missing "urlader" partition .wifi unusa...TrunkUnconfirmed Task Description

FritzBox 7262SL
OpenWrt SNAPSHOT, r18621-af8a059bb4
Tested custom build and default trunk image

root@OpenWrt:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00400000 00020000 “kernel” mtd1: 07c00000 00020000 “ubi” mtd2: 00060000 00010000 “tffs (1)” mtd3: 00060000 00010000 “tffs (2)”

root@OpenWrt:~# ls -l /lib/firmware/ath9k-eeprom-pci-0000:01:00.0.bin
-rw-r–r– 1 root root 0 Jan 22 00:19 /lib/firmware/ath9k-eeprom-pci-0000:01:00.0.bin

After restoring eeprom bin from previous build radio was back

20.01.20224233Base systemBug ReportVery LowCriticalawk from busybox-v1.35.0 doesn't work.TrunkUnconfirmed Task Description

Form data handler ‘<form action=”/examples/awk-scripts.cgi” method=”post“>’ is not executed.
awk problem with busybox-v1.35.0-1.

Reverting awk itself to busybox-v1.33.1 and rebuilding.
And the awk scripting engine works.

The patch is needed in: /openwrt-master/package/utils/busybox/patches/521-revert_awk_busybox-1.33.1.patch

20.01.20224232PackagesBug ReportVery LowMediumdnsmasq-full fails to resolve randomly domains if DNSSE...TrunkUnconfirmed Task Description

dnsmasq-full fails to resolve randomly domains if DNSSEC is enabled and DNS forwarders are Cloudfare servers e.g. 1.1.1.1, 1.0.0.1
Device problem occurs on TP-Link Archer C2 and Archer C7.
OpenWRT 19.07.8, dnsmasq-full 2.80-16.3.

 


20.01.20224231Base systemBug ReportVery LowHighIssue with the autotool macroTrunkUnconfirmed Task Description

Hi,

I’m trying to add a kernel package that needs it’s modules loaded at boot, but in a certain order. Yet, when I make the following:

JOOL_AUTOLOAD:= \
jool_common \
jool_nat64 \
jool_siit

AUTOLOAD:=$(call AutoLoad,48,$(JOOL_AUTOLOAD))

The output of the file is always:

jool
jool_common
jool_siit

After some research it seems that the macro sorts the items alphabetically breaking the makefile configuration. Is it possible to fix this behaviour? Is there any alternative that should be used?

Thanks!

20.01.20224230PackagesBug ReportVery LowLowI didn't find a wifidog or wifidog app package in toolc...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 


19.01.20224229Base systemBug ReportVery LowHighMT7621 Wireless default erroropenwrt-21.02Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 
  1. Device problem occurs on Phicomm K2P
  2. Software versions of OpenWrt/LEDE release OpenWrt 21.02.1 r16325-88151b8303 / LuCI openwrt-21.02 branch git-21.295.67054-13df80d
  3. Steps to reproduce just flash openwrt-21.02.1-ramips-mt7621-phicomm_k2p-squashfs-sysupgrade.bin

/etc/config/wireless

config wifi-device 'radio0'
	option type 'mac80211'
	option channel '36'
	option hwmode '11a'
	option path '1e140000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0'
	option htmode 'VHT80'
	option disabled '1'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'OpenWrt'
	option encryption 'none'

config wifi-device 'radio1'
	option type 'mac80211'
	option channel '36'
	option hwmode '11a'
	option path '1e140000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0+1'
	option htmode 'VHT80'
	option disabled '1'

config wifi-iface 'default_radio1'
	option device 'radio1'
	option network 'lan'
	option mode 'ap'
	option ssid 'OpenWrt'
	option encryption 'none'

It’s two 802.11nac,no have 802.11bg.

in luci if you enable two wifi ,they all cheange to 802.11nac.

18.01.20224228ToolchainBug ReportVery LowMediumtools: update libtoolTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
No specific device
- Software versions of OpenWrt/LEDE release, packages, etc.
Trunk

I am trying to add a package which requires libtool 2.4.6 and I was wondering if it is possible for it to be updated, since the most recent version was released 7 years ago I believe we should already be there.

Thanks!

16.01.20224227Base systemBug ReportVery LowMediummr8300: no WAN port in switchopenwrt-21.02Unconfirmed Task Description

Device problem occurs on: Linksys MR8300

Software version: OpenWrt 21.02.1 r16325-88151b8303 / LuCI openwrt-21.02 branch git-21.295.67054-13df80d

Steps to reproduce:
- navigate to Network → Switch
- the WAN port does not appear

Workaround:
- create a VLAN without the WAN port
- connect via SSH and edit /etc/config/network
- add port number 5 in the VLAN
- reboot

16.01.20224226Base systemBug ReportVery LowHighPackage kmod-phy-ath79-usb missing kernel modules.TrunkUnconfirmed Task Description

Hi!

I upgraded my DIR-505 to 21.02.1 using openwrt-21.02.1-ath79-generic-dlink_dir-505-squashfs-sysupgrade.bin and found that the USB port wasn’t working.

I then reset the device(long pressed the reset button) and the USB port still doesn’t work.

Upon investigation I found that the `kmod-phy-ath79-usb` package doesn’t contain any kernel modules.(Only 2 text files.)

Supply the following if possible:
- Device problem occurs on

D-Link DIR-505

- Software versions of OpenWrt/LEDE release, packages, etc.

BUILD_ID=”r16325-88151b8303” OPENWRT_BOARD=”ath79/generic” OPENWRT_ARCH=”mips_24kc” OPENWRT_TAINTS=”” OPENWRT_DEVICE_MANUFACTURER=”OpenWrt” OPENWRT_DEVICE_MANUFACTURER_URL=”https://openwrt.org/” OPENWRT_DEVICE_PRODUCT=”Generic” OPENWRT_DEVICE_REVISION=”v0” OPENWRT_RELEASE=”OpenWrt 21.02.1 r16325-88151b8303”

root@OpenWrt:~# opkg info kmod-phy-ath79-usb
Package: kmod-phy-ath79-usb
Version: 5.4.154-1
Depends: kernel (= 5.4.154-1-79c5dc6db69102eb2943a96b9bec8b63), kmod-usb-core
Status: install ok installed
Architecture: mips_24kc
Installed-Time: 1635066095

- Steps to reproduce

 root@OpenWrt:~# opkg files kmod-phy-ath79-usb

Package kmod-phy-ath79-usb (5.4.154-1) is installed on root and has the following files:
/etc/modules.d/21-phy-ath79-usb
/etc/modules-boot.d/21-phy-ath79-usb
root@OpenWrt:~#


13.01.20224225Base systemBug ReportVery LowLowlogread starts before interface is upTrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

openwrt 21.02.1 on x86_64 (virtualbox)
interfaces are all Intel Pro/1000 T Server 82543GC
logread is configured to forward messages to a syslog server

It seems as if logread forwarding starts before it is able to actually send messages to the syslog server, resulting in lost messages. This is important as the syslog server generates monitoring information, including status of all interfaces on the router. The loss of early interface messages means that the monitoring does not get a full picture of the status of these devices.

I have attached a log of the console output from the router bootup.
I have also attached a log of the messages received by the syslog server.

Interestingly, other routers forward their messages to the same syslog server and yet none of those routers’ messages are dropped. These routers have nearly identical configuations too.

Incidentally, a google search reveals that this was previously logged on the old openwrt bug tracker at External Link.
Additionally, a similar bug was logged against logread at External Link.


13.01.20224224Base systemBug ReportVery LowHighR4s refresh the latest firmware, the uplink speed is on...AllUnconfirmed Task Description

Device name: r4s
Firmware download: https://downloads.openwrt.org/snapshots/targets/rockchip/armv8/openwrt-rockchip-armv8-friendlyarm_nanopi-r4s-ext4-sysupgrade.img.gz

Problem description: Using iperf3 test the uplink speed is only 1-3Mbps, but using https://github.com/DHDAXCW/NanoPi-R4S/releases 2 can run the full bandwidth.


12.01.20224223Base systemBug ReportVery LowLowUpgrade from ar71xx to ath79 fails on NETGEAR WNDR4300 ...openwrt-21.02Unconfirmed Task Description

Reporting according to
https://openwrt.org/docs/guide-user/installation/ar71xx.to.ath79

because from what I gather, that is probably the cause for the upgrade failure.

Model NETGEAR WNDR4300
Architecture Atheros AR9344 rev 2
Firmware Version OpenWrt 19.07.3 r11063-85e04e9f46 / LuCI openwrt-19.07 branch git-21.357.58233-6f349c9

sysupgrade -n openwrt-21.02.1-ath79-nand-netgear_wndr4300-squashfs-sysupgrade.bin

fails with

Device wndr4300 not supported by this image
Supported devices: netgear,wndr4300
Invalid sysupgrade file.
Image check failed.

Image downloaded from
https://downloads.openwrt.org/releases/21.02.1/targets/ath79/nand/openwrt-21.02.1-ath79-nand-netgear_wndr4300-squashfs-sysupgrade.bin

Checked
https://openwrt.org/docs/techref/targets/ar71xx-ath79

Also tried the SNAPSHOT from
https://downloads.openwrt.org/snapshots/targets/ath79/nand/openwrt-ath79-nand-netgear_wndr4300-squashfs-sysupgrade.bin

sysupgrade -T openwrt-ath79-nand-netgear_wndr4300-squashfs-sysupgrade.bin
Device wndr4300 not supported by this image
Supported devices: netgear,wndr4300
Invalid sysupgrade file.
Image check failed.

dmesg output attached.

And last, but not least, thanks for this excellent project.
/Yan

09.01.20224222Base systemBug ReportVery LowLowvalgrind: does not detect memory leaks depite unstrippe...TrunkUnconfirmed Task Description

I am using valgrind 3.18.1-1 on x86_64 r18400-f9782f5bcd. This build uses musl 1.2.2-3. My libraries, to include libc, are not stripped.

According to the upstream bug at https://bugs.kde.org/show_bug.cgi?id=435441, changes to musl left valgrind unable to detect memory leaks. The workaround proposed in that bug report, namely passing “–soname-synonyms=somalloc=NONE” to valgrind, seems to fix the problem on OpenWrt.

Here is an example program:

#include <stdio.h>
#include <stdlib.h>
                   
int f(void) {
        char *buf = malloc(BUFSIZ);
        if (buf == NULL) {         
                return -1;
        }                 
        return 0;
}                           
                            
int main(void)   
{             
        f();  
}

I compiled this with “gcc -O0 -o test test.c”, and I ran the following to demonstrate the problem and workaround:

$ valgrind --leak-check=full ./test
==31728== Memcheck, a memory error detector
==31728== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==31728== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info
==31728== Command: ./test
==31728== 
==31728== 
==31728== HEAP SUMMARY:
==31728==     in use at exit: 0 bytes in 0 blocks
==31728==   total heap usage: 0 allocs, 0 frees, 0 bytes allocated
==31728== 
==31728== All heap blocks were freed -- no leaks are possible
==31728== 
==31728== For lists of detected and suppressed errors, rerun with: -s
==31728== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
$ valgrind --leak-check=full  --soname-synonyms=somalloc=NONE ./test
==31732== Memcheck, a memory error detector
==31732== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==31732== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info
==31732== Command: ./test
==31732== 
==31732== 
==31732== HEAP SUMMARY:
==31732==     in use at exit: 1,024 bytes in 1 blocks
==31732==   total heap usage: 1 allocs, 0 frees, 1,024 bytes allocated
==31732== 
==31732== 1,024 bytes in 1 blocks are definitely lost in loss record 1 of 1
==31732==    at 0x48806B6: malloc (vg_replace_malloc.c:381)
==31732==    by 0x40111B: f (in /home/mike@flyn.org/valgrindC/test)
==31732==    by 0x40113D: main (in /home/mike@flyn.org/valgrindC/test)
==31732== 
==31732== LEAK SUMMARY:
==31732==    definitely lost: 1,024 bytes in 1 blocks
==31732==    indirectly lost: 0 bytes in 0 blocks
==31732==      possibly lost: 0 bytes in 0 blocks
==31732==    still reachable: 0 bytes in 0 blocks
==31732==         suppressed: 0 bytes in 0 blocks
==31732== 
==31732== For lists of detected and suppressed errors, rerun with: -s
==31732== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0)
09.01.20224221Base systemBug ReportVery LowLowR7800 poor download rate when client connects with 100F...TrunkUnconfirmed Task Description

Netgear Nighthawk X4S R7800 with OpenWrt 21.02.1 freshly installed

ISP line is 250/25. Wan port is 1G (auto).

Steps to reproduce:
Laptop connected on LAN-side with 1G (auto): Ookla speedtest is 250/25.
Laptop connected on LAN-side with 100FD: Ookla speedtest is only 30/25.

This performance degration only occurs, when the R7800 is routing and natting the traffic.
“Switched only” traffic inside the LAN is not affected.

With stock ROM the download rate is as expected:
Laptop connected on LAN-side with 100FD: Ookla speedtest is 80/25.


07.01.20224220Base systemBug ReportVery LowLowMTU > 1500 settings are missing for WAN and LANx mt7621TrunkUnconfirmed Task Description

Dir878 /882 /882-r1 (mt7530)
OpenWrt SNAPSHOT, r18502-53b87a7a28 but seems linux 5.10 builds are afected as 5.4 kernel it’s fine.

There is issue with setting MTU to 1508 for DSA driver to be rfc4638 compatibile

root@OpenWrt:~# ifconfig br-lan mtu 1508
root@OpenWrt:~# ifconfig eth0 mtu 1508
root@OpenWrt:~# ifconfig LAN2 mtu 1508
ifconfig: SIOCSIFMTU: Invalid argument

But even then MTU > 1500 seem to work for lan side.

root@OpenWrt:~# fping -s -M -b 1473 192.168.1.3
192.168.1.3 is alive

But to be able to use rfc4638 pppoe WAN must be set to 1508
root@OpenWrt:~# ifconfig wan mtu 1508
ifconfig: SIOCSIFMTU: Invalid argument

PPPoE session is always connecting with MTU 1492

06.01.20224219Base systemBug ReportVery LowLowConsider enabling crontab special time extensionTrunkUnconfirmed Task Description

Please consider enabling cron special time extensions by default. Having them enabled improves crontab UX.
Grepping openwrt/openwrt suggest that enabling BUSYBOX_DEFAULT_FEATURE_CROND_SPECIAL_TIMES under openwrt/package/utils/busybox/Config-defaults.in should do the trick.

- Software versions of OpenWrt/LEDE release, packages, etc.
Busybox 1.34.1-1, OpenWrt SNAPSHOT r18125-b764cb9e5b
- Steps to reproduce
1. Add a scheduled task via LuCI or crontab -e
Example:

@weekly foo.sh

2. Log:

cron.err crond[25439]: user root: parse error at @weekly
04.01.20224218Base systemBug ReportVery LowLowon bcm63xx/HW553 i can chage wired MAC address but not ...openwrt-21.02Unconfirmed Task Description

I Own a set of router as subject, that had to be ‘jailbreaked’ installing a custom CFE via JTAG. Clearly, in this way all router have the same MAC addresses.

I can change wired mac address in LUCI, or appending:

 option macaddr '00:24:89:41:4e:22'

and work as expected. But i cannot do that for wireless one, simply does not work.

Strange things, if i do:

 ifconfig wlan0 down
 ifconfig wlan hw ether 00:24:89:41:4e:22
 ifconfig wlan0 up

MAC address change, but wireless does not work, i need to do a ‘wifi restart’, and after that MAC address get back to ‘wrong’ one.

I’ve tried to look for that in OpenWRT wiki, also in b43 driver page, but nothing useful popoup.

Thanks.

02.01.20224217Base systemBug ReportVery LowLowImage check failes for ar71xx to ath79 on WNDR3700v4openwrt-19.07Unconfirmed Task Description

Image check fails if trying to upgrade from OpenWrt 19.07.8 r11364-ef56c85848 / LuCI openwrt-19.07 branch git-21.189.23240-7b931da to the new ath79 based builds.

Model: NETGEAR WNDR3700v4
Architecture: Atheros AR9344 rev 2

 

Reproducible with sysupgrade from either:

https://firmware-selector.openwrt.org/?version=21.02.0&target=ath79%2Fnand&id=netgear_wndr3700-v4 https://firmware-selector.openwrt.org/?version=21.02.1&target=ath79%2Fnand&id=netgear_wndr3700-v4

Error says:

Device wndr3700v4 not supported by this image Supported devices: netgear,wndr3700-v4 Invalid sysupgrade file. Image check failed.

01.01.20224216Base systemBug ReportVery LowLowds-lite: Command failed: Invalid argumentopenwrt-21.02Unconfirmed Task Description

System info

- Device problem occurs on

  • x86-64 based router

- Software versions of OpenWrt/LEDE release, packages, etc.

  • OpenWrt 21.02.1

ISP connectivity options

My ISP (Orange Polska) provides two options for network connectivity:

  • IPv4
  • IPv6 with DS-Lite

My WAN interface is called “Orange”.

IPv4

IPv4 setup works fine. My router uses PPPoE to authenticate, setup all routes etc and things “just works”.

IPv6

IPv6 is more problematic. I can setup IPv6 only network (including LAN clients). But to get IPv4 connectivity I need to setup DS-Lite.

Installed ‘ds-lite’ package. Used tcpdump to get AFTR address from DHCPv6 packets. Reconfigured “Orange_6” and “Orange_DS_lite”:

config interface 'Orange'
        option proto 'pppoe'
        option device 'eth0.35'
        option username 'bez_ochrony-REDACTED@neostrada.pl/ipv6'
        option password 'REDACTED'
        option ipv6 'auto'
        option ip6assign '64'

config interface 'Orange_6'
        option proto 'dhcpv6'
        option device '@Orange'
        option iface_dslite 'Orange_DS_lite'
        option reqaddress 'try'
        option reqprefix 'auto'
        option reqopts '64'

config interface 'Orange_DS_lite'
        option proto 'dslite'
        option peeraddr 'szcz01f.cgn.tpnet.pl'
        option ip6addr '2a01:ZZZZ:YYYY:XXXX::1'
        option encaplimit 'ignore'

I can see (from debug output added in /lib/netifd/proto/dslite.sh and /lib/netifd/netifd-proto.sh scripts) that it tries to configure DS-Lite link:

Sat Jan  1 13:11:14 2022 daemon.notice netifd: Orange_DS_lite (13810): dslite.sh: ip6addr: 2a01:ZZZZ:YYYY:XXXX::1
Sat Jan  1 13:11:14 2022 daemon.notice netifd: Orange_DS_lite (13810): dslite.sh: peeraddr: 2a01:1000:0:1::9114
Sat Jan  1 13:11:14 2022 daemon.notice netifd: Orange_DS_lite (13810): _proto_notify(): iface=Orange_DS_lite opts=
Sat Jan  1 13:11:14 2022 daemon.notice netifd: Orange_DS_lite (13810): _proto_notify(): json_dump={ "action": 0, "ifname": "ds-Orange_DS_lite", "link-up": true, "tunnel": { "mode": "ipip6", "mtu": 1280, "ttl": 64, "local": "2a01:ZZZZ:YYYY:XXXX::1", "remote": "2a01:1000:0:1::9114", "data": { "encaplimit": "ignore" } }, "data": { "firewall": [ { "type": "nat", "target": "ACCEPT" } ] }, "keep": false, "ipaddr": [ { "ipaddr": "192.0.0.2", "ptp": "192.0.0.1" } ], "routes": [ { "target": "0.0.0.0", "netmask": "0" } ], "interface": "Orange_DS_lite" }
Sat Jan  1 13:11:14 2022 daemon.notice netifd: Orange_DS_lite (13810): Command failed: Invalid argument

And then it loops and floods log with repeated failures.

What is wrong?

31.12.20214215Base systemBug ReportVery LowMediumTP-Link Archer C6 loses internet connectivity after a w...TrunkUnconfirmed Task Description

Problem device: Tp-Link Archer C6 v2 EU version
Software:
- LuCI openwrt-21.02 branch (git-21.231.26241-422c175)
- OpenWrt 21.02.0 r16279-5cc0535800

I installed the open wrt binary using this guide: https://radix007.github.io/OpenWrt-Tp-Link-C6/#installing-openwrt-using-tftpd-method-b-

No custom setup was done, I only turned 5Ghz radio on. Both wifi and ethernet worked out of the box, WAN connected without issues however in the morning internet connection was down. It fixed after restarting WAN interface from GUI. According to my script that was pinging google connection lasted for about 7 hours before going down. There were no logs from around the time connection was lost.

30.12.20214214Base systemBug ReportVery LowMediumNetgear r6220 randomly disconnecting from ISPopenwrt-21.02Unconfirmed Task Description

Device: Netgear R6220
Firmware: 20.02 snapshot r18400-f9782f5bcd

After the router has been up a while it will start to lose wan connectivity to my ISP (Frontier FiOS). I’m unable to ping the default gateway. Using my cellular data, I ssh to a remote server and ping the same gateway and it pings fine.

It’s only down for a a few to 30 seconds and comes backup usually with the following message

 

Dec 30 01:07:02 gateway dnsmasq[304]: possible DNS-rebind attack detected: dns.msftncsi.com

There is no indication that the wan connection is down, and the lights don’t change.

The ISP sent me a new router which I have now connected up and it’s been stable.

I’ve tried two different R6220 routers, since I have a spare, and that gave the same issues.

28.12.20214213Base systemBug ReportVery LowLowInternet Doesn't Work At All. Needs Investigation. TrunkUnconfirmed Task Description

I have been experimenting with OpenWRT using a Raspberry Pi, however the PI cannot connect to the internet. After wasting many hours google-ing and trying every suggestion I can find I have reached the conclusion that something is critically wrong with OpenWRT. I have seen that a lot of people are having this problem, so I would like to start a discussion on how to resolve these internet connectivity issues once and for all.

Set-Up
I am in my office, I just have a single ethernet port for my suite. So the office ethernet port is connected to a TP-Link (TL-GS1016S). My MacBook is connected to one port and the Pi running OpenWRT is connected using another port.

My MacBook pro is connected to the same switch as the Pi and the internet is working fine. I have Wi-fi disabled on my Mac. I can ping the Raspberry pi from my MacBook (ping 192.168.1.200) with no issues and vice-versa. Although I cannot access Luci via the IP address.

Process
Download OpenWRT for Pi 4 from here: https://openwrt.org/toh/raspberry_pi_foundation/raspberry_pi Image: https://downloads.openwrt.org/releases/21.02.1/targets/bcm27xx/bcm2711/openwrt-21.02.1-bcm27xx-bcm2711-rpi-4-squashfs-factory.img.gz

Flash to SD Card using etcher

Add IP Address using the following commands. Source: https://openwrt.org/docs/guide-quick-start/ssh_connect_to_the_internet_and_install_luci uci set network.lan.ipaddr=”192.168.1.200” uci set network.lan.gateway=”192.168.1.1” uci set network.lan.dns=”192.168.1.1” uci commit
/etc/init.d/network restart

However i still can not run
ping google.com
ping: bad address ‘google.com’ ping 1.1.1.1
PING 1.1.1.1 (1.1.1.1): 56 data bytes
does nothing

WHY?!?!?!?!

Solutions I have tried.
Add default gateway as there was no default when I ran $> route. Source: https://superuser.com/questions/854166/openwrt-software-update-wget-returns-network-is-unreachable

route add default gw 192.168.1.1 br-lan

Also tried:

route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.1.1

I tried adding 2 dns items to /etc/config/network

list dns ‘192.168.1.2’ list dns ‘8.8.8.8’

27.12.20214211Base systemBug ReportVery LowMediumDIR-867: udhcpc fails to get a lease on the WAN portopenwrt-21.02Unconfirmed Task Description

Device: D-Link DIR-867 HW:A1
Software: openwrt-21.02.1-ramips-mt7621-dlink_dir-867-a1-squashfs-factory.bin

Reproducer:

  1. Install OpenWRT on the DIR-867.
  2. Set the system configuration to defaults.
  3. Reboot.
  4. Wait for a DHCP lease on the WAN port.

I only ever got this message with a timeout and zero bytes inbound:

udhcpc: sending discover

I tried these things:

  • Running udhcpc at the console with various options like -T, -C and -B.
  • Doing ifconfig up/down on the WAN interface.
  • Toggling every DHCP option in LuCI.
  • Disabling the firewall.

The ISP is Teksavvy through a Technicolor DOCSIS modem. Any other DHCP client works as expected when directly connected to the modem. Reverting to stock D-Link firmware version 1.30 resolves the glitch.

Showing tasks 1 - 50 of 1430 Page 1 of 291 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing