OpenWrt/LEDE Project

Welcome to the OpenWrt/LEDE Project bug reporting and issue tracking system

Problems to be reported here are for the OpenWrt/LEDE Project targets, sources, toolchain, core packages, build procedures, distribution and infrastructure. Guidelines for submitting a good bug report can be found at the OpenWrt/LEDE Project website. Problems related to LuCI or OpenWrt packages need to be reported in their repositories:

Notifications of all submissions and task changes are sent to lede-bugs@infradead.org.

OpenedID  descCategoryTask TypePrioritySeveritySummaryReported InStatus
17.09.20192509Base systemBuild FailureVery LowLowMissing dependencies on Snapshot 19.07TrunkUnconfirmed Task Description

Hello! I’m try to build OpenWrt on Snapshot 19.07 for GL.inet ar150 and have problem with satisfy dependencies.

Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for firewall:
* libip4tc2
* libip6tc2
* opkg_install_cmd: Cannot install package firewall.

When I try to add luci I get the same error:

Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for luci:
* libip4tc2
* libip6tc2
* opkg_install_cmd: Cannot install package luci.

I’m use latest image builder and make cleanup after every attempt.


17.09.20192508Base systemBug ReportVery LowHighoxnas pogoplug3 warm booting, no serial, kernel hang?TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

CloudEngines Pogoplug v3

- Software versions of OpenWrt/LEDE release, packages, etc.

# cat /etc/openwrt_release 
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='SNAPSHOT'
DISTRIB_REVISION='r11027-f39f4b2f6d'
DISTRIB_TARGET='oxnas/ox820'
DISTRIB_ARCH='arm_mpcore'
DISTRIB_DESCRIPTION='OpenWrt SNAPSHOT r11027-f39f4b2f6d'
DISTRIB_TAINTS='no-all busybox'

- Steps to reproduce

 

When the device reboots with power on, I get a bootlog like this:

root@pogoplug:/# reboot
root@pogoplug:/# [   58.722024] reboot: Restarting system

U-Boot SPL 2013.10 (Apr 27 2014 - 19:08:27)
  Boot device: NAND
Attempting to set PLLA to 800 MHz ...
  plla_ctrl0 : 0000030a
  plla_ctrl1 : 00400000
  plla_ctrl2 : 007f0068
  plla_ctrl3 : 00000193

PLLA Set


U-Boot 2013.10-tld-3 (May 15 2014 - 14:54:14) for OXNAS

DRAM:  128 MiB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   
Led:    GREEN
mii0
Main Loop
Hit any key to stop autoboot:  0 

Loading from nand0, offset 0x440000
   Image Name:   ARM OpenWrt Linux-4.14.143
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3057200 Bytes = 2.9 MiB
   Load Address: 60008000
   Entry Point:  60008000
## Booting kernel from Legacy Image at 60500000 ...
   Image Name:   ARM OpenWrt Linux-4.14.143
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3057200 Bytes = 2.9 MiB
   Load Address: 60008000
   Entry Point:  60008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Led:    GREEN

Starting kernel ...

and hangs there, can’t connect to it over the network, so it doesn’t seem like just a serial problem.

From a cold start (power cycle), the bootlog looks like this:

U-Boot SPL 2013.10 (Apr 27 2014 - 19:08:27)
  Boot device: NAND
Attempting to set PLLA to 800 MHz ...
  plla_ctrl0 : 0000030a
  plla_ctrl1 : 00400000
  plla_ctrl2 : 007f0068
  plla_ctrl3 : 00000193

PLLA Set


U-Boot 2013.10-tld-3 (May 15 2014 - 14:54:14) for OXNAS

DRAM:  128 MiB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   
Led:    GREEN
mii0
Main Loop
Hit any key to stop autoboot:  0 

Loading from nand0, offset 0x440000
   Image Name:   ARM OpenWrt Linux-4.14.143
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3057200 Bytes = 2.9 MiB
   Load Address: 60008000
   Entry Point:  60008000
## Booting kernel from Legacy Image at 60500000 ...
   Image Name:   ARM OpenWrt Linux-4.14.143
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3057200 Bytes = 2.9 MiB
   Load Address: 60008000
   Entry Point:  60008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Led:    GREEN

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.143 (openwrt@hawg) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r8984-6ba58b7b02)) #0 SMP Mon Sep 16 06:37:06 2019
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Cloud Engines PogoPlug Series 3
[...]

and it continues to boot normally. Up until recently (10561-gff7909f69e) reboots would just hang (see also https://bugs.openwrt.org/index.php?do=details&task_id=1711), so this is an improvement, but still not fully working.

16.09.20192507Base systemBug ReportVery LowLowmdadm segfault due to ASLR on kirkwood/generic/zyxel_ns...openwrt-18.06Unconfirmed Task Description

In OpenWrt 18.06.4, r7808-ef686b7292 on Zyxel NSA325v2 (kirkwood/generic/zyxel_nsa325) mdadm segafults due to ASLR (Address Space Layout Randomization).

Workaround that works for me is adding kernel.randomize_va_space=0 to /etc/sysctl.conf.

I posted some more details to forum in https://forum.openwrt.org/t/raid-not-working-on-18-06-0/18498

I will be happy to provide more information.

Thanks,

Tomas

 


16.09.20192501Base systemBug ReportVery LowMediumOpenWRT Bug with WPA2-EAP on Linksys WRT3200ACMopenwrt-18.06Unconfirmed Task Description

There is a bug, when you are using a Linksys WRT3200ACM and there is a network with wpa2-eap encryption. You are getting diconnected after one or two hours. It reconnects after a few minutes. This issue only appears with the wpa2-eap encryption method. The wpa2-psk encryption works fine. I am using "OpenWrt 18.06.4 r7808-ef686b7292" and "wpad 2018-05-21-62566bc2-6". The RADIUS-Server is a Windows-Server and the Linksys AP is only a pass-through.

My wireless config:

config wifi-iface
	option device 'radio1'
	option mode 'ap'
	option ssid 'RADIUS-NETWORK'
	option network '115_RADIUS'
	option disassoc_low_ack '0'
	option encryption 'wpa2+ccmp'
	option auth_server 'XXX'
	option auth_secret 'XXX'
	option ieee80211r '1'
	option ft_over_ds '0'
	option ft_psk_generate_local '1'
	option nasid 'AccessPoint5'

System Log:

Mon Sep  2 09:10:48 2019 daemon.info hostapd: wlan1: STA 18:3d:a2:66:3a:80 IEEE 802.11: associated (aid 1)
Mon Sep  2 09:10:48 2019 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-STARTED 18:3d:a2:66:3a:80
Mon Sep  2 09:10:48 2019 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
Mon Sep  2 09:10:51 2019 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-RETRANSMIT 18:3d:a2:66:3a:80
Mon Sep  2 09:10:51 2019 daemon.info hostapd: wlan1: STA 18:3d:a2:66:3a:80 IEEE 802.11: authenticated
Mon Sep  2 09:10:57 2019 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-RETRANSMIT 18:3d:a2:66:3a:80
Mon Sep  2 09:11:09 2019 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-RETRANSMIT 18:3d:a2:66:3a:80
Mon Sep  2 09:11:29 2019 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-RETRANSMIT 18:3d:a2:66:3a:80
Mon Sep  2 09:11:49 2019 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-RETRANSMIT 18:3d:a2:66:3a:80
Mon Sep  2 09:12:09 2019 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-RETRANSMIT 18:3d:a2:66:3a:80
Mon Sep  2 09:12:09 2019 daemon.notice hostapd: wlan1: CTRL-EVENT-EAP-TIMEOUT-FAILURE 18:3d:a2:66:3a:80
Mon Sep  2 09:12:11 2019 kern.debug kernel: [3338862.064627] ieee80211 phy1: staid 3 deleted
Mon Sep  2 09:12:14 2019 daemon.info hostapd: wlan1: STA 18:3d:a2:66:3a:80 IEEE 802.11: deauthenticated due to local deauth request
Mon Sep  2 13:37:57 2019 daemon.info hostapd: wlan1: STA 18:3d:a2:66:3a:80 IEEE 802.11: disassociated due to inactivity
Mon Sep  2 13:37:58 2019 daemon.info hostapd: wlan1: STA 18:3d:a2:66:3a:80 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
16.09.20192500Base systemBug ReportVery LowLowTP-Link Archer C50 extremly low distance to connect to...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on TP-Link Archer C50
- Software versions of OpenWrt/LEDE release, packages : https://downloads.openwrt.org/releases/19.07-SNAPSHOT/targets/ramips/mt76x8/ - Steps to reproduce : Install OpenWrt, configure some Wifi SSID a try connect. With original firmware can be distance between router and me ten of meters.
With OpenWrt closing wood door between me and router and signal quality drops down.

 


16.09.20192499PackagesBug ReportVery LowMediumGammu : USSD not showing anythingTrunkUnconfirmed Task Description

On trunk openwrt, on ath79 comfast e5 (supported), gammu package no longer respond on getussd command

Steps to reproduce:
gammu getussd “*143#” (replace *143# by your usual USSD service on mobile network)


15.09.20192498KernelBug ReportVery LowMediumUsing "wifi" causes soft reboot after a certain kernel ...TrunkUnconfirmed Task Description

Device: Xiaomi Mi Router 3g
OpenWrt: SNAPSHOT r10890-7d542dc804
mt76: 4.14.140+2019-08-22-2a0edbb4-1
Full list of installed packages

Some time during the normal operation “ieee80211_ctstoself_get” warning happens which and I seemingly lose the ability to use 5ghz AP from my tablet(on my phone it’s perfectly fine).
If I try to restart APs via “wifi” Oops in hostapd happens and take the router with it to soft reboot. Attached 2 recent crashlogs.

15.09.20192496Base systemBug ReportVery LowHighWPA3-SAE can't be enabled on mt76 deviceTrunkUnconfirmed Task Description

Device: Netgear EX2700

Version: OpenWrt 19.07-SNAPSHOT r10532-cf3b50377e / LuCI openwrt-19.07 branch (git-19.256.45060-8a2f1c7)

Steps to reproduce: Enable WPA3 or WPA3-Mixed Mode via LuCI.

Result:
Wifi won’t come up. Works fine with WPA2.

Sun Sep 15 20:08:18 2019 kern.info kernel: [ 1638.740004] device wlan0 left promiscuous mode
Sun Sep 15 20:08:18 2019 kern.info kernel: [ 1638.740123] br-lan: port 2(wlan0) entered disabled state
Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED
Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING
Sun Sep 15 20:08:18 2019 daemon.notice netifd: Network device 'wlan0-1' link is down
Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.020561] br-guest: port 2(wlan0-1) entered disabled state
Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.023338] device wlan0-1 left promiscuous mode
Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.023357] br-guest: port 2(wlan0-1) entered disabled state
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0-1 from bridge br-guest: No such device
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0 from bridge br-lan: Invalid argument
Sun Sep 15 20:08:19 2019 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Sun Sep 15 20:08:19 2019 daemon.notice netifd: radio0 (1867): command failed: Not supported (-122)
Sun Sep 15 20:08:19 2019 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Sun Sep 15 20:08:19 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sun Sep 15 20:08:21 2019 kern.info kernel: [ 1639.912716] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start
Sun Sep 15 20:08:21 2019 kern.info kernel: [ 1639.913245] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.824164] ieee80211 phy0: rt2800_loft_iq_calibration: Info - LOFT Calibration Done!
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.828164] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start!
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.842569] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 0, phase=3f)
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.843488] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start!
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.857895] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= 0, phase= 2)
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.857931] ieee80211 phy0: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done!
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.871433] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=1, Ph_rx=-6
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.881694] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=0, Ph_rx=2
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.888849] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894441] br-lan: port 2(wlan0) entered blocking state
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894456] br-lan: port 2(wlan0) entered disabled state
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894799] device wlan0 entered promiscuous mode
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Sun Sep 15 20:08:22 2019 daemon.err hostapd: Using interface wlan0 with hwaddr XX:XX:XX:XX:XX:XX and ssid "HOME"
Sun Sep 15 20:08:22 2019 daemon.err hostapd: Interface initialization failed
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994731] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994904] br-lan: port 2(wlan0) entered blocking state
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994914] br-lan: port 2(wlan0) entered forwarding state
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Sun Sep 15 20:08:22 2019 daemon.err hostapd: wlan0: Unable to setup interface.
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING
Sun Sep 15 20:08:22 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0-1 wasn't started
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sun Sep 15 20:08:22 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1642.002616] device wlan0 left promiscuous mode
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1642.002723] br-lan: port 2(wlan0) entered disabled state
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x77d76c60 user_data=0 handler=0x46a4f5
Sun Sep 15 20:08:22 2019 daemon.notice netifd: radio0 (1867): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 1120 path ()
Sun Sep 15 20:08:22 2019 daemon.notice netifd: radio0 (1867): Device setup failed: HOSTAPD_START_FAILED


15.09.20192495Base systemBug ReportVery LowLowucert rebuild within SDK segfaults on Debian 10 and Ubu...TrunkNew Task Description

Using the 19.07-SNAPSHOT SDK build Sept 12 (last successful build by the buildbots it looks like), and current openwrt-19.07 branch on the feeds, if doing signed build, the build fails due to ucert segfaulting (this is on Debian 10).

ldd staging_dir/host/bin/ucert shows:

      linux-vdso.so.1 (0x00007ffd03d63000)
      libubox.so => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libubox.so (0x00007ff0db3b0000)
      libblobmsg_json.so => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libblobmsg_json.so (0x00007ff0db3a8000)
      libjson-c.so.2 => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libjson-c.so.2 (0x00007ff0db398000)
      libc.so.6 => /home/daniel/Build/sdk-19.07-ath79/staging_dir/host/lib/libc.so.6 (0x00007ff0daff8000)
      /lib64/ld-linux-x86-64.so.2 (0x00007ff0db3c8000)

I’m wondering if the problem is due to using host instead SDK libraries.


14.09.20192494Base systemFeature RequestVery LowVery LowImplement system to allow LuCI to display messages prio...AllUnconfirmed Task Description

Currently there is no system to alert users to possible issues they may encounter when flashing a new image. This has led to certain features being delayed or even withheld (the switch from swconfig → DSA is a good example). Simply put there is no way to alert the average user to configuration breaking changes a new image might make.

A short header that contains important information could be inserted into OpenWrt images. The header is parsed and displayed via LuCI if certain criteria are/aren’t met. This could be something as simple as a image version check or something more complex like configuration and package comparisons.

This is really more of a forward looking feature, but it would allow more drastic changes (changes that cannot be migrated) be made between OpenWrt versions.

14.09.20192493Base systemBug ReportVery LowLow5g wifi fails on Linksys WRT1900AC hostpadopenwrt-18.06Unconfirmed Task Description

- Device problem occurs on

 Linksys WRT1900AC

- Software versions of OpenWrt/LEDE release, packages, etc.

 OpenWrt 18.06.4 r7808-ef686b7292 with ipv6 disabled

- Steps to reproduce

  • via LuCI with 2g radios enabled on radio0 (2g works as expected)
  • Turn radio1 on with ac mode, Transmit Power auto, Hide ESSID ticked, channel 36, wmm off, Encryption WPA2, Cipher CCMP, Krack countermeasures ticked, Short preamble ticked, Disassociate on low acknowledgement ticked
  • On initial save, a laptop will connect successfully and be able to browse the web – once a change is made, like changing the channel, access to LuCI is temporarily lost and the 5g light on the unit goes off.
  • Once this occurs, no device can see the 5g SSID anymore.. once access to LuCI comes back, the 5g radio still shows as enabled

From Syslog:

Sep 13 23:33:56 2019 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Fri Sep 13 23:33:56 2019 daemon.notice netifd: radio1 (16823): command failed: Not supported (-95)
Fri Sep 13 23:33:56 2019 user.notice mac80211: Failed command: iw phy phy1 set distance 0
Fri Sep 13 23:34:22 2019 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Fri Sep 13 23:34:22 2019 daemon.notice netifd: radio1 (19940): command failed: Not supported (-95)
Fri Sep 13 23:34:22 2019 user.notice mac80211: Failed command: iw phy phy1 set distance 0
Fri Sep 13 23:34:22 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Fri Sep 13 23:34:23 2019 kern.debug kernel: [13773.974005] ieee80211 phy1: change: 0xffffffff
Fri Sep 13 23:34:23 2019 kern.info kernel: [13774.104582] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Fri Sep 13 23:34:23 2019 kern.info kernel: [13774.107676] br-lan: port 3(wlan1) entered blocking state
Fri Sep 13 23:34:23 2019 kern.info kernel: [13774.107695] br-lan: port 3(wlan1) entered disabled state
Fri Sep 13 23:34:23 2019 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Sep 13 23:34:23 2019 daemon.err hostapd: Using interface wlan1 with hwaddr 94:10:3e:xx and ssid "5gssid"
Fri Sep 13 23:34:23 2019 kern.info kernel: [13774.107990] device wlan1 entered promiscuous mode
Fri Sep 13 23:34:23 2019 kern.info kernel: [13774.108094] br-lan: port 3(wlan1) entered blocking state
Fri Sep 13 23:34:23 2019 kern.info kernel: [13774.108106] br-lan: port 3(wlan1) entered forwarding state
Fri Sep 13 23:34:23 2019 kern.info kernel: [13774.111029] br-lan: port 3(wlan1) entered disabled state
Fri Sep 13 23:34:23 2019 kern.debug kernel: [13774.211021] ieee80211 phy1: change: 0x100
Fri Sep 13 23:34:23 2019 kern.debug kernel: [13774.219866] ieee80211 phy1: change: 0x42
Fri Sep 13 23:34:23 2019 kern.info kernel: [13774.390870] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Fri Sep 13 23:34:23 2019 kern.info kernel: [13774.390981] br-lan: port 3(wlan1) entered blocking state
Fri Sep 13 23:34:23 2019 kern.info kernel: [13774.390988] br-lan: port 3(wlan1) entered forwarding state
Fri Sep 13 23:34:23 2019 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ENABLED
Fri Sep 13 23:34:23 2019 daemon.notice hostapd: wlan1: AP-ENABLED
Fri Sep 13 23:34:23 2019 daemon.notice netifd: Network device 'wlan1' link is up
Fri Sep 13 23:35:20 2019 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED xx:xx
...
Sep 13 23:40:51 2019 daemon.notice hostapd: wlan1: DFS-CAC-COMPLETED success=0 freq=5280 ht_enabled=1 chan_offset=0 chan_width=1 cf1=5280 cf2=0
Fri Sep 13 23:40:51 2019 daemon.notice hostapd: wlan1: INTERFACE-DISABLED
Fri Sep 13 23:40:51 2019 kern.info kernel: [14161.966122] br-lan: port 3(wlan1) entered disabled state
Fri Sep 13 23:40:51 2019 kern.info kernel: [14162.009569] device wlan1 left promiscuous mode
Fri Sep 13 23:40:51 2019 kern.info kernel: [14162.009585] br-lan: port 3(wlan1) entered disabled state
Fri Sep 13 23:40:51 2019 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Fri Sep 13 23:40:51 2019 daemon.notice netifd: radio1 (20987): command failed: Not supported (-95)
Fri Sep 13 23:40:51 2019 user.notice mac80211: Failed command: iw phy phy1 set distance 0
Fri Sep 13 23:40:51 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Fri Sep 13 23:40:51 2019 kern.debug kernel: [14162.333032] ieee80211 phy1: change: 0xffffffff
Fri Sep 13 23:40:51 2019 daemon.notice hostapd: wlan1: INTERFACE-ENABLED
Fri Sep 13 23:40:51 2019 kern.info kernel: [14162.447753] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Fri Sep 13 23:40:51 2019 daemon.notice hostapd: wlan1: INTERFACE-DISABLED
Fri Sep 13 23:40:51 2019 daemon.err hostapd: nl80211: Could not configure driver mode
Fri Sep 13 23:40:51 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Fri Sep 13 23:40:51 2019 daemon.err hostapd: nl80211 driver initialization failed.
Fri Sep 13 23:40:51 2019 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->DISABLED
Fri Sep 13 23:40:51 2019 daemon.notice hostapd: wlan1: AP-DISABLED
Fri Sep 13 23:40:51 2019 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Fri Sep 13 23:40:51 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan1 wasn't started
Fri Sep 13 23:40:51 2019 daemon.notice netifd: radio1 (20987): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 20132 path ()
Fri Sep 13 23:40:51 2019 daemon.notice netifd: radio1 (20987): Device setup failed: HOSTAPD_START_FAILED
Fri Sep 13 23:41:01 2019 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Fri Sep 13 23:41:01 2019 daemon.notice netifd: radio1 (21197): command failed: Not supported (-95)
Fri Sep 13 23:41:01 2019 user.notice mac80211: Failed command: iw phy phy1 set distance 0
Fri Sep 13 23:41:01 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Fri Sep 13 23:41:02 2019 kern.debug kernel: [14172.951695] ieee80211 phy1: change: 0xffffffff
Fri Sep 13 23:41:02 2019 daemon.notice hostapd: wlan1: INTERFACE-ENABLED
Fri Sep 13 23:41:02 2019 kern.info kernel: [14173.063478] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Fri Sep 13 23:41:02 2019 daemon.notice hostapd: wlan1: INTERFACE-DISABLED
Fri Sep 13 23:41:02 2019 daemon.err hostapd: nl80211: Could not configure driver mode
Fri Sep 13 23:41:02 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Fri Sep 13 23:41:02 2019 daemon.err hostapd: nl80211 driver initialization failed.
Fri Sep 13 23:41:02 2019 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->DISABLED
Fri Sep 13 23:41:02 2019 daemon.notice hostapd: wlan1: AP-DISABLED
Fri Sep 13 23:41:02 2019 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Fri Sep 13 23:41:02 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan1 wasn't started
Fri Sep 13 23:41:02 2019 daemon.notice netifd: radio1 (21197): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 20132 path ()
Fri Sep 13 23:41:02 2019 daemon.notice netifd: radio1 (21197): Device setup failed: HOSTAPD_START_FAILED

Hostpad config:

root@OpenWrt:~# cat /var/run/hostapd-phy1.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=US
ieee80211d=1
ieee80211h=1
hw_mode=a
beacon_int=100
channel=36


ieee80211n=1
ht_coex=0
ht_capab=[LDPC][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
ieee80211ac=1
vht_capab=[RXLDPC][SHORT-GI-80][SU-BEAMFORMER][SU-BEAMFORMEE][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC-1][MAX-A-MPDU-LEN-EXP7]

interface=wlan1
ctrl_interface=/var/run/hostapd
ap_isolate=1
bss_load_update_period=60
chan_util_avg_period=600
disassoc_low_ack=1
preamble=1
wmm_enabled=0
ignore_broadcast_ssid=1
uapsd_advertisement_enabled=1
wpa_passphrase=xx
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=5gssid
bridge=br-lan
wpa_disable_eapol_key_retries=1
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
bssid=94:10:3e:xx

Troubleshooting attempted:

  • Changing country code
  • Changing 5g channel
  • Enable/disable WMM mode
  • Restart the 5g interface from LuCI
  • Factory reset and clean setup of 5g

All yield the same issue.

12.09.20192492ToolchainBuild FailureVery LowMediumWhen building an image from an imagebuilder the build f...TrunkUnconfirmed Task Description

When building an image (from git commit 81764319637f408623ed9f4bae3f0d149b010f07) from already built imagebuilder for ar71xx target, the build fails at the end (after “Finalizing root filesystem”) because of missing ‘mips-openwrt-linux-musl’. I searched the original build directory in openwrt tree and this lib seems to be to find (among others) in:

./staging_dir/toolchain-mips_24kc_gcc-8.3.0_musl/mips-openwrt-linux-musl

but for some reason is not saved into the imagebuilder image.

This is the message from the end of imagebuilder build.

Finalizing root filesystem...
...
Enabling urandom_seed
Enabling urngd
/home/risa/openwrt/openwrt-imagebuilder-ar71xx-generic.Linux-x86_64/staging_dir/host/bin/find: '/home/risa/openwrt/openwrt-imagebuilder-ar71xx-generic.Linux-x86_64/staging_dir/target-mips_24kc_musl/root-ar71xx': No such file or directory
/home/risa/openwrt/openwrt-imagebuilder-ar71xx-generic.Linux-x86_64/staging_dir/host/bin/find: '/home/risa/openwrt/openwrt-imagebuilder-ar71xx-generic.Linux-x86_64/staging_dir/target-mips_24kc_musl/root-ar71xx': No such file or directory
Traceback (most recent call last):
  File "/home/risa/openwrt/openwrt-imagebuilder-ar71xx-generic.Linux-x86_64/staging_dir/host/bin/mklibs", line 426, in <module>
    inode = os.stat(prog)[ST_INO]
FileNotFoundError: [Errno 2] No such file or directory: 'mips-openwrt-linux-musl'
make[2]: *** [Makefile:163: prepare_rootfs] Error 1
make[1]: *** [Makefile:119: _call_image] Error 2
make: *** [Makefile:197: image] Error 2
09.09.20192487Base systemBug ReportVery LowMediumKeenetic problemsTrunkWaiting on reporter Task Description

My Keenetic have 8mb of memory, but in openwrt (latest snapshot) I have only 233kb of free space and not working usb
Please change in /openwrt/target/linux/ramips/dts/rt3052_zyxel_keenetic.dts
This:

partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x3b0000>;
};

To:

partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};

And in /openwrt/target/linux/ramips/image/rt305x.mk

define Device/zyxel_keenetic
MTK_SOC := rt3052
BLOCKSIZE := 64k
IMAGE_SIZE := 3776k
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := Keenetic
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ehci kmod-usb-ledtrig-usbport kmod-usb-dwc2
SUPPORTED_DEVICES += kn
endef
TARGET_DEVICES += zyxel_keenetic

To:

define Device/zyxel_keenetic
MTK_SOC := rt3052
BLOCKSIZE := 64k
IMAGE_SIZE := 7872k
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := Keenetic
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ehci kmod-usb-ledtrig-usbport kmod-usb-dwc2
SUPPORTED_DEVICES += kn
endef
TARGET_DEVICES += zyxel_keenetic
 


07.09.20192484Base systemBug ReportVery LowLowdnsmasq UCI configuration dhcp.@host[n].ip needs to be ...TrunkUnconfirmed Task Description

UCI configuration

dhcp.@host[n].ip

needs to be optional.

According to http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq-man.html . dhcp-host isn’t just for static leases, it can be used to specify lease time, hostname etc, so IP isn’t mandatory. Their example is “For example –dhcp-host=00:20:e0:3b:13:af,wap,infinite tells dnsmasq to give the machine with hardware address 00:20:e0:3b:13:af the name wap, and an infinite DHCP lease.”

OpenWrt currently ignores dhcp.@host[n], if IP isn’t provided. https://openwrt.org/docs/guide-user/base-system/dhcp#static_leases

07.09.20192483Base systemBug ReportVery LowMediumprocd: watchdog timeout is too high for sun8iTrunkUnconfirmed Task Description

Device: Orange Pi M2 Ultra
Version: trunk
Steps to reproduce:
- build trunk with the DTS for Orange Pi M2 Ultra
- boot
- wait 10 seconds
- watchdog will reset the SoC

Problem:
- the default wdt_drv_timeout of procd is 30 seconds and cannot be changed in menuconfig (https://git.openwrt.org/?p=project/procd.git;a=blob_plain;f=watchdog.c;hb=refs/heads/master)
- the maximum timeout of the sun8i watchdog is 16 seconds (https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/watchdog/sunxi_wdt.c?h=v4.19.71)
- wdt_frequency is not low enough to prevent the sun8i watchdog from resetting the SoC

I was able to mitigate the watchdog reset with the following patch to procd:

--- a/watchdog.c	2019-09-06 06:13:52.293677306 +0000
+++ b/watchdog.c	2019-09-06 06:14:46.716987215 +0000
@@ -30,13 +30,13 @@
 
 static struct uloop_timeout wdt_timeout;
 static int wdt_fd = -1;
-static int wdt_drv_timeout = 30;
-static int wdt_frequency = 5;
+static int wdt_drv_timeout = 5;
+static int wdt_frequency = 1;
 static bool wdt_magicclose = false;
 
 void watchdog_ping(void)
 {
-	DEBUG(4, "Ping\n");
+	DEBUG(4, "Ping watchdog\n");
 	if (wdt_fd >= 0 && write(wdt_fd, "X", 1) < 0)
 		ERROR("WDT failed to write: %m\n");
 }
@@ -170,6 +170,7 @@
 	watchdog_timeout_cb(&wdt_timeout);
 
 	DEBUG(4, "Opened watchdog with timeout %ds\n", watchdog_timeout(0));
+	watchdog_ping();
 }


I’m sorry but I don’t know enough C to provide a patch that includes a configurable watchdog timeout in the main menuconfig for procd.

06.09.20192482Base systemBug ReportVery LowLowMT7621 hw flow offload crashTrunkUnconfirmed Task Description

Device with MT7621 (RT-AC57U) crashes after some time with “FLOWOFFLOAD hw” rule in iptables.

CPU 1 Unable to handle kernel paging request at virtual address 008c5c40, epc == 87130390, ra == 871303b8
...
Call Trace:
[<871308e4>] flow_offload_lookup+0x1a8/0x5b8 [nf_flow_table]

Full crashlog is attached.

Related:
FS#1917 FS#1994 FS#2115

05.09.20192480Base systemBug ReportVery LowCriticalMainline ath10k causes crahes in ipq806x / R7800TrunkUnconfirmed Task Description

The mainline ath10k mainly works in R7800, although it has some problems the show up in the logs as

"ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon"

.

That seems to increase CPU utilisation somewhat, but the router still works.

Every now and then the router also crashes. I have attached a serial logger to the router, so I managed to capture the following crash series. 4-5 crashes during a few hours when the router was mainly idle.

360130.583644] ath10k_warn: 81 callbacks suppressed
[360130.583662] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360130.587378] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360130.594965] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360130.602223] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360130.609691] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360130.617450] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360130.624456] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360130.631736] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360130.639168] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360130.646535] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360135.612292] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360135.612372] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360135.618864] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360135.626263] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360135.633611] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360135.641453] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360135.648443] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360135.655742] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360135.663114] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360135.670426] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360193.344931] ath10k_warn: 1 callbacks suppressed
[360193.344951] ath10k_pci 0001:01:00.0: Invalid peer id 21 peer stats buffer
[360561.357841] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360561.357923] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360561.364436] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360561.371813] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360561.379094] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360561.387292] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360561.393973] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360561.401336] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360561.408651] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[360561.416080] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[361642.965765] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[361642.965909] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[361642.972378] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[361642.979740] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped new beacon
[361642.987116] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[361642.994737] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[361643.001848] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[361643.009206] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[361643.016513] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[361643.023961] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[362072.425064] INFO: rcu_sched self-detected stall on CPU
[362072.425140] 	1-...: (2099 ticks this GP) idle=e76/2/0 softirq=2206647/2206647 fqs=1 
[362072.429122] 	 (t=2100 jiffies g=859207 c=859206 q=1)
[362072.437118] rcu_sched kthread starved for 2099 jiffies! g859207 c859206 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=0
[362072.442151] rcu_sched       I    0     8      2 0x00000000
[362072.445060] INFO: rcu_sched detected stalls on CPUs/tasks:
[362072.452779] [<c07f6148>] (__schedule) from [<c07f6268>] (schedule+0x88/0xb0)
[362072.458211] 	1-...: (2099 ticks this GP) idle=e76/2/0 softirq=2206647/2206647 fqs=1 
[362072.463781] [<c07f6268>] (schedule) from [<c07fa568>] (schedule_timeout+0x254/0x280)
[362072.471049] 	(detected by 0, t=2102 jiffies, g=859207, c=859206, q=1)
[362072.478904] [<c07fa568>] (schedule_timeout) from [<c0377e30>] (rcu_gp_kthread+0x44c/0x868)
[362072.478937] [<c0377e30>] (rcu_gp_kthread) from [<c033e4e4>] (kthread+0x164/0x16c)
[362072.486680] Sending NMI from CPU 0 to CPUs 1:
[362072.493123] [<c033e4e4>] (kthread) from [<c0307d28>] (ret_from_fork+0x14/0x2c)


U-Boot 2012.07 [local,local] (Sep 03 2015 - 17:33:28)

U-boot 2012.07 dni1 V0.4 for DNI HW ID: 29764958 NOR flash 0MB; NAND flash 128MB; RAM 512MB; 1st Radio 4x4; 2nd Radio 4x4; Cascade
smem ram ptable found: ver: 0 len: 5
...
[  773.047773] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[  837.296527] ath10k_warn: 4 callbacks suppressed
[  837.296544] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[  837.299941] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[  837.307289] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[  837.314563] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[  837.321785] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[  837.329215] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[  837.336478] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[  837.343755] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[  837.350961] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[  837.358346] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1040.672740] INFO: rcu_sched self-detected stall on CPU
[ 1040.672797] 	1-...: (1 GPs behind) idle=e4e/2/0 softirq=10446/10449 fqs=0 
[ 1040.676785] 	 (t=2100 jiffies g=3493 c=3492 q=17)
[ 1040.683649] rcu_sched kthread starved for 2100 jiffies! g3493 c3492 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=0
[ 1040.688426] rcu_sched       I    0     8      2 0x00000000
[ 1040.698694] [<c07f6148>] (__schedule) from [<c07f6268>] (schedule+0x88/0xb0)
[ 1040.704061] [<c07f6268>] (schedule) from [<c07fa568>] (schedule_timeout+0x254/0x280)
[ 1040.711278] [<c07fa568>] (schedule_timeout) from [<c0377e30>] (rcu_gp_kthread+0x44c/0x868)
[ 1040.718996] [<c0377e30>] (rcu_gp_kthread) from [<c033e4e4>] (kthread+0x164/0x16c)
[ 1040.727070] [<c033e4e4>] (kthread) from [<c0307d28>] (ret_from_fork+0x14/0x2c)
[ 1040.734613] NMI backtrace for cpu 1
[ 1040.741718] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.141 #0
[ 1040.745103] Hardware name: Generic DT based system
[ 1040.751379] [<c030f2c4>] (unwind_backtrace) from [<c030b4c0>] (show_stack+0x14/0x20)
[ 1040.756063] [<c030b4c0>] (show_stack) from [<c07e0898>] (dump_stack+0x88/0x9c)
[ 1040.763955] [<c07e0898>] (dump_stack) from [<c07e6b44>] (nmi_cpu_backtrace+0xc4/0xd8)
[ 1040.770983] [<c07e6b44>] (nmi_cpu_backtrace) from [<c07e6bec>] (nmi_trigger_cpumask_backtrace+0x94/0x138)
[ 1040.778886] [<c07e6bec>] (nmi_trigger_cpumask_backtrace) from [<c0379564>] (rcu_dump_cpu_stacks+0x8c/0xcc)
[ 1040.788432] [<c0379564>] (rcu_dump_cpu_stacks) from [<c0378a78>] (rcu_check_callbacks+0x358/0x858)
[ 1040.797986] [<c0378a78>] (rcu_check_callbacks) from [<c037cdf4>] (update_process_times+0x3c/0x70)
[ 1040.806937] [<c037cdf4>] (update_process_times) from [<c038dea8>] (tick_sched_timer+0x48/0xa4)
[ 1040.815870] [<c038dea8>] (tick_sched_timer) from [<c037d764>] (__hrtimer_run_queues+0xdc/0x1a8)
[ 1040.824374] [<c037d764>] (__hrtimer_run_queues) from [<c037dea0>] (hrtimer_interrupt+0xc0/0x230)
[ 1040.832967] [<c037dea0>] (hrtimer_interrupt) from [<c06a8574>] (msm_timer_interrupt+0x38/0x48)
[ 1040.841994] [<c06a8574>] (msm_timer_interrupt) from [<c036e140>] (handle_percpu_devid_irq+0x84/0x174)
[ 1040.850420] [<c036e140>] (handle_percpu_devid_irq) from [<c03689a4>] (generic_handle_irq+0x28/0x40)
[ 1040.859704] [<c03689a4>] (generic_handle_irq) from [<c0368ffc>] (__handle_domain_irq+0xa4/0xc8)
[ 1040.868554] [<c0368ffc>] (__handle_domain_irq) from [<c0301488>] (gic_handle_irq+0x6c/0xb8)
[ 1040.877234] [<c0301488>] (gic_handle_irq) from [<c030c08c>] (__irq_svc+0x6c/0x90)
[ 1040.885558] Exception stack(0xdd461a80 to 0xdd461ac8)
[ 1040.893222] 1a80: dbe78bf0 dbe78ce0 dbe78ce0 db79b094 dbe78be0 dbe78cc8 00000002 dbe78ce0
[ 1040.898264] 1aa0: 32eb15be fffffffb 00000100 00000000 dbe78ce0 dd461ad0 00000458 bf7892a8
[ 1040.906400] 1ac0: 20000113 ffffffff
[ 1040.914718] [<c030c08c>] (__irq_svc) from [<bf7892a8>] (ieee80211_next_txq+0x44/0x134 [mac80211])
[ 1040.918158] [<bf7892a8>] (ieee80211_next_txq [mac80211]) from [<bf83b388>] (ath10k_mac_op_wake_tx_queue+0x44/0xd4 [ath10k_core])
[ 1040.927119] [<bf83b388>] (ath10k_mac_op_wake_tx_queue [ath10k_core]) from [<bf78c38c>] (ieee80211_unreserve_tid+0x73c/0x106c [mac80211])
[ 1040.938745] [<bf78c38c>] (ieee80211_unreserve_tid [mac80211]) from [<bf790760>] (__ieee80211_subif_start_xmit+0x824/0xa3c [mac80211])
[ 1040.950984] [<bf790760>] (__ieee80211_subif_start_xmit [mac80211]) from [<bf790c64>] (ieee80211_subif_start_xmit+0x2ec/0x30c [mac80211])
[ 1040.962780] [<bf790c64>] (ieee80211_subif_start_xmit [mac80211]) from [<c06d6670>] (dev_hard_start_xmit+0xc8/0x154)
[ 1040.974986] [<c06d6670>] (dev_hard_start_xmit) from [<c06d6e1c>] (__dev_queue_xmit+0x610/0x790)
[ 1040.985148] [<c06d6e1c>] (__dev_queue_xmit) from [<c07be768>] (br_dev_queue_push_xmit+0x118/0x13c)
[ 1040.993821] [<c07be768>] (br_dev_queue_push_xmit) from [<c07bbea8>] (br_dev_xmit+0x2a8/0x2e4)
[ 1041.002848] [<c07bbea8>] (br_dev_xmit) from [<c06d6670>] (dev_hard_start_xmit+0xc8/0x154)
[ 1041.011440] [<c06d6670>] (dev_hard_start_xmit) from [<c06d6e1c>] (__dev_queue_xmit+0x610/0x790)
[ 1041.019601] [<c06d6e1c>] (__dev_queue_xmit) from [<c071d268>] (ip_finish_output2+0x2b8/0x32c)
[ 1041.028103] [<c071d268>] (ip_finish_output2) from [<c071de90>] (ip_output+0xa0/0xb4)
[ 1041.036782] [<c071de90>] (ip_output) from [<c071a738>] (ip_forward+0x320/0x3a4)
[ 1041.044593] [<c071a738>] (ip_forward) from [<c071964c>] (ip_rcv+0x268/0x290)
[ 1041.051626] [<c071964c>] (ip_rcv) from [<c06d5300>] (__netif_receive_skb_core+0xa20/0xbbc)
[ 1041.058924] [<c06d5300>] (__netif_receive_skb_core) from [<c06d77e0>] (netif_receive_skb_internal+0xc0/0xd4)
[ 1041.067064] [<c06d77e0>] (netif_receive_skb_internal) from [<bf307560>] (ifb_ri_tasklet+0x130/0x2d0 [ifb])
[ 1041.077063] [<bf307560>] (ifb_ri_tasklet [ifb]) from [<c03242dc>] (tasklet_action+0xa4/0x130)
[ 1041.086437] [<c03242dc>] (tasklet_action) from [<c03015c8>] (__do_softirq+0xf0/0x264)
[ 1041.095028] [<c03015c8>] (__do_softirq) from [<c0324810>] (irq_exit+0xdc/0x148)
[ 1041.102842] [<c0324810>] (irq_exit) from [<c030e4cc>] (handle_IPI+0xb4/0x1ac)
[ 1041.109958] [<c030e4cc>] (handle_IPI) from [<c03014b8>] (gic_handle_irq+0x9c/0xb8)
[ 1041.117247] [<c03014b8>] (gic_handle_irq) from [<c030c08c>] (__irq_svc+0x6c/0x90)
[ 1041.124705] Exception stack(0xdd461f80 to 0xdd461fc8)
[ 1041.132287] 1f80: 00000001 00000000 00000000 c03151e0 ffffe000 c0b03cbc c0b03c6c 00000000
[ 1041.137325] 1fa0: 00000000 512f04d0 00000000 00000000 dd461fc8 dd461fd0 c030862c c0308630
[ 1041.145461] 1fc0: 60000013 ffffffff
[ 1041.153621] [<c030c08c>] (__irq_svc) from [<c0308630>] (arch_cpu_idle+0x38/0x44)
[ 1041.156932] [<c0308630>] (arch_cpu_idle) from [<c035dde8>] (do_idle+0xe8/0x1bc)
[ 1041.164562] [<c035dde8>] (do_idle) from [<c035e130>] (cpu_startup_entry+0x1c/0x20)
[ 1041.171590] [<c035e130>] (cpu_startup_entry) from [<423017cc>] (0x423017cc)
[ 1046.642677] ath10k_warn: 68 callbacks suppressed
[ 1046.642789] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1046.646429] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1046.653553] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1046.660770] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
...
[ 3008.389926] ath10k_warn: 16 callbacks suppressed
[ 3008.389945] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 3008.393667] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 3008.400787] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 3008.408065] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 3008.415273] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 3008.422680] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 3008.429942] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 3008.437261] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 3008.444481] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 3008.451841] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon


U-Boot 2012.07 [local,local] (Sep 03 2015 - 17:33:28)

U-boot 2012.07 dni1 V0.4 for DNI HW ID: 29764958 NOR flash 0MB; NAND flash 128MB; RAM 512MB; 1st Radio 4x4; 2nd Radio 4x4; Cascade
smem ram ptable found: ver: 0 len: 5
...
[ 1586.322105] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1648.916398] ath10k_warn: 4 callbacks suppressed
[ 1648.916413] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1648.919827] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1648.927174] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1648.934447] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1648.941728] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1648.948956] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1648.956355] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1648.963646] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1648.970951] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1648.978119] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 2137.388904] INFO: rcu_sched self-detected stall on CPU
[ 2137.388979] 	1-...: (2100 ticks this GP) idle=40e/2/0 softirq=19899/19899 fqs=0 
[ 2137.392961] 	 (t=2100 jiffies g=5916 c=5915 q=1)
[ 2137.400522] rcu_sched kthread starved for 2100 jiffies! g5916 c5915 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=1
[ 2137.405122] rcu_sched       I    0     8      2 0x00000000
[ 2137.415313] [<c07f6148>] (__schedule) from [<c07f6268>] (schedule+0x88/0xb0)
[ 2137.420676] [<c07f6268>] (schedule) from [<c07fa568>] (schedule_timeout+0x254/0x280)
[ 2137.427896] [<c07fa568>] (schedule_timeout) from [<c0377e30>] (rcu_gp_kthread+0x44c/0x868)
[ 2137.435613] [<c0377e30>] (rcu_gp_kthread) from [<c033e4e4>] (kthread+0x164/0x16c)
[ 2137.443684] [<c033e4e4>] (kthread) from [<c0307d28>] (ret_from_fork+0x14/0x2c)
[ 2137.451240] Sending NMI from CPU 1 to CPUs 0:
[ 2137.459906] NMI backtrace for cpu 0
[ 2137.459914] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.141 #0
[ 2137.459918] Hardware name: Generic DT based system
[ 2137.459923] task: c0b06d80 task.stack: c0b00000
[ 2137.459927] PC is at _raw_spin_lock_bh+0x40/0x58
[ 2137.459932] LR is at ieee80211_txq_schedule_start+0x2c/0x50 [mac80211]
[ 2137.459937] pc : [<c07fb0fc>]    lr : [<bf789670>]    psr: 20000113
[ 2137.459941] sp : c0b01d68  ip : db5d0cd8  fp : db5d1de0
[ 2137.459945] r10: c0b01e80  r9 : 0000012c  r8 : 00000002
[ 2137.459949] r7 : 00000002  r6 : 00000002  r5 : db5d0cc8  r4 : db5d0cf4
[ 2137.459953] r3 : 0000c072  r2 : 0000c073  r1 : 00000000  r0 : db5d0cc8
[ 2137.459958] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[ 2137.459963] Control: 10c5787d  Table: 5d3b006a  DAC: 00000051
[ 2137.459968] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.141 #0
[ 2137.459973] Hardware name: Generic DT based system
[ 2137.459978] [<c030f2c4>] (unwind_backtrace) from [<c030b4c0>] (show_stack+0x14/0x20)
[ 2137.459983] [<c030b4c0>] (show_stack) from [<c07e0898>] (dump_stack+0x88/0x9c)
[ 2137.459987] [<c07e0898>] (dump_stack) from [<c07e6b2c>] (nmi_cpu_backtrace+0xac/0xd8)
[ 2137.459993] [<c07e6b2c>] (nmi_cpu_backtrace) from [<c030e588>] (handle_IPI+0x170/0x1ac)
[ 2137.459998] [<c030e588>] (handle_IPI) from [<c03014b8>] (gic_handle_irq+0x9c/0xb8)
[ 2137.460004] [<c03014b8>] (gic_handle_irq) from [<c030c08c>] (__irq_svc+0x6c/0x90)
[ 2137.460008] Exception stack(0xc0b01d18 to 0xc0b01d60)
[ 2137.460012] 1d00:                                                       db5d0cc8 00000000
[ 2137.460017] 1d20: 0000c073 0000c072 db5d0cf4 db5d0cc8 00000002 00000002 00000002 0000012c
[ 2137.460022] 1d40: c0b01e80 db5d1de0 db5d0cd8 c0b01d68 bf789670 c07fb0fc 20000113 ffffffff
[ 2137.460027] [<c030c08c>] (__irq_svc) from [<c07fb0fc>] (_raw_spin_lock_bh+0x40/0x58)
[ 2137.460034] [<c07fb0fc>] (_raw_spin_lock_bh) from [<bf789670>] (ieee80211_txq_schedule_start+0x2c/0x50 [mac80211])
[ 2137.460041] [<bf789670>] (ieee80211_txq_schedule_start [mac80211]) from [<bf83b27c>] (ath10k_mac_tx_push_pending+0x4c/0x114 [ath10k_core])
[ 2137.460047] [<bf83b27c>] (ath10k_mac_tx_push_pending [ath10k_core]) from [<bf84bd38>] (ath10k_htt_txrx_compl_task+0x1038/0x10a0 [ath10k_core])
[ 2137.460053] [<bf84bd38>] (ath10k_htt_txrx_compl_task [ath10k_core]) from [<bf897b74>] (ath10k_pci_napi_poll+0x80/0x120 [ath10k_pci])
[ 2137.460059] [<bf897b74>] (ath10k_pci_napi_poll [ath10k_pci]) from [<c06d7c1c>] (net_rx_action+0x144/0x31c)
[ 2137.460064] [<c06d7c1c>] (net_rx_action) from [<c03015c8>] (__do_softirq+0xf0/0x264)
[ 2137.460068] [<c03015c8>] (__do_softirq) from [<c0324810>] (irq_exit+0xdc/0x148)
[ 2137.460074] [<c0324810>] (irq_exit) from [<c0369000>] (__handle_domain_irq+0xa8/0xc8)
[ 2137.460079] [<c0369000>] (__handle_domain_irq) from [<c0301488>] (gic_handle_irq+0x6c/0xb8)
[ 2137.460085] [<c0301488>] (gic_handle_irq) from [<c030c08c>] (__irq_svc+0x6c/0x90)
[ 2137.460089] Exception stack(0xc0b01f48 to 0xc0b01f90)
[ 2137.460093] 1f40:                   00000001 00000000 00000000 c03151e0 ffffe000 c0b03cbc
[ 2137.460098] 1f60: c0b03c6c 00000000 00000000 c0a2da28 00000000 00000000 c0b01f90 c0b01f98
[ 2137.460102] 1f80: c030862c c0308630 60000013 ffffffff
[ 2137.460107] [<c030c08c>] (__irq_svc) from [<c0308630>] (arch_cpu_idle+0x38/0x44)
[ 2137.460112] [<c0308630>] (arch_cpu_idle) from [<c035dde8>] (do_idle+0xe8/0x1bc)
[ 2137.460117] [<c035dde8>] (do_idle) from [<c035e130>] (cpu_startup_entry+0x1c/0x20)
[ 2137.460122] [<c035e130>] (cpu_startup_entry) from [<c0a00cf4>] (start_kernel+0x420/0x42c)
[ 2137.460335] NMI backtrace for cpu 1
[ 2137.781508] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.141 #0
[ 2137.784801] Hardware name: Generic DT based system
[ 2137.791080] [<c030f2c4>] (unwind_backtrace) from [<c030b4c0>] (show_stack+0x14/0x20)
[ 2137.795767] [<c030b4c0>] (show_stack) from [<c07e0898>] (dump_stack+0x88/0x9c)
[ 2137.803658] [<c07e0898>] (dump_stack) from [<c07e6b44>] (nmi_cpu_backtrace+0xc4/0xd8)
[ 2137.810686] [<c07e6b44>] (nmi_cpu_backtrace) from [<c07e6bec>] (nmi_trigger_cpumask_backtrace+0x94/0x138)
[ 2137.818591] [<c07e6bec>] (nmi_trigger_cpumask_backtrace) from [<c0379564>] (rcu_dump_cpu_stacks+0x8c/0xcc)
[ 2137.828139] [<c0379564>] (rcu_dump_cpu_stacks) from [<c0378a78>] (rcu_check_callbacks+0x358/0x858)
[ 2137.837689] [<c0378a78>] (rcu_check_callbacks) from [<c037cdf4>] (update_process_times+0x3c/0x70)
[ 2137.846643] [<c037cdf4>] (update_process_times) from [<c038dea8>] (tick_sched_timer+0x48/0xa4)
[ 2137.855576] [<c038dea8>] (tick_sched_timer) from [<c037d764>] (__hrtimer_run_queues+0xdc/0x1a8)
[ 2137.864080] [<c037d764>] (__hrtimer_run_queues) from [<c037dea0>] (hrtimer_interrupt+0xc0/0x230)
[ 2137.872675] [<c037dea0>] (hrtimer_interrupt) from [<c06a8574>] (msm_timer_interrupt+0x38/0x48)
[ 2137.881699] [<c06a8574>] (msm_timer_interrupt) from [<c036e140>] (handle_percpu_devid_irq+0x84/0x174)
[ 2137.890123] [<c036e140>] (handle_percpu_devid_irq) from [<c03689a4>] (generic_handle_irq+0x28/0x40)
[ 2137.899408] [<c03689a4>] (generic_handle_irq) from [<c0368ffc>] (__handle_domain_irq+0xa4/0xc8)
[ 2137.908259] [<c0368ffc>] (__handle_domain_irq) from [<c0301488>] (gic_handle_irq+0x6c/0xb8)
[ 2137.916937] [<c0301488>] (gic_handle_irq) from [<c030c08c>] (__irq_svc+0x6c/0x90)
[ 2137.925258] Exception stack(0xdd461a80 to 0xdd461ac8)
[ 2137.932932] 1a80: da4ff000 db5d0ce0 db5d0ce0 da4ff094 db5d0be0 db5d0cc8 00000002 db5d0ce0
[ 2137.937973] 1aa0: 641e87bd fffffff4 00000100 00000000 db5d0ce0 dd461ad0 00000458 bf7892b4
[ 2137.946102] 1ac0: a0000113 ffffffff
[ 2137.954419] [<c030c08c>] (__irq_svc) from [<bf7892b4>] (ieee80211_next_txq+0x50/0x134 [mac80211])
[ 2137.957823] [<bf7892b4>] (ieee80211_next_txq [mac80211]) from [<bf83b388>] (ath10k_mac_op_wake_tx_queue+0x44/0xd4 [ath10k_core])
[ 2137.966851] [<bf83b388>] (ath10k_mac_op_wake_tx_queue [ath10k_core]) from [<bf78c38c>] (ieee80211_unreserve_tid+0x73c/0x106c [mac80211])
[ 2137.978542] [<bf78c38c>] (ieee80211_unreserve_tid [mac80211]) from [<bf790760>] (__ieee80211_subif_start_xmit+0x824/0xa3c [mac80211])
[ 2137.990782] [<bf790760>] (__ieee80211_subif_start_xmit [mac80211]) from [<bf790c64>] (ieee80211_subif_start_xmit+0x2ec/0x30c [mac80211])
[ 2138.002530] [<bf790c64>] (ieee80211_subif_start_xmit [mac80211]) from [<c06d6670>] (dev_hard_start_xmit+0xc8/0x154)
[ 2138.014694] [<c06d6670>] (dev_hard_start_xmit) from [<c06d6e1c>] (__dev_queue_xmit+0x610/0x790)
[ 2138.024854] [<c06d6e1c>] (__dev_queue_xmit) from [<c07be768>] (br_dev_queue_push_xmit+0x118/0x13c)
[ 2138.033526] [<c07be768>] (br_dev_queue_push_xmit) from [<c07bbea8>] (br_dev_xmit+0x2a8/0x2e4)
[ 2138.042555] [<c07bbea8>] (br_dev_xmit) from [<c06d6670>] (dev_hard_start_xmit+0xc8/0x154)
[ 2138.051147] [<c06d6670>] (dev_hard_start_xmit) from [<c06d6e1c>] (__dev_queue_xmit+0x610/0x790)
[ 2138.059309] [<c06d6e1c>] (__dev_queue_xmit) from [<c071d268>] (ip_finish_output2+0x2b8/0x32c)
[ 2138.067809] [<c071d268>] (ip_finish_output2) from [<c071de90>] (ip_output+0xa0/0xb4)
[ 2138.076488] [<c071de90>] (ip_output) from [<c071a738>] (ip_forward+0x320/0x3a4)
[ 2138.084297] [<c071a738>] (ip_forward) from [<c071964c>] (ip_rcv+0x268/0x290)
[ 2138.091330] [<c071964c>] (ip_rcv) from [<c06d5300>] (__netif_receive_skb_core+0xa20/0xbbc)
[ 2138.098630] [<c06d5300>] (__netif_receive_skb_core) from [<c06d77e0>] (netif_receive_skb_internal+0xc0/0xd4)
[ 2138.106779] [<c06d77e0>] (netif_receive_skb_internal) from [<bf307560>] (ifb_ri_tasklet+0x130/0x2d0 [ifb])
[ 2138.116786] [<bf307560>] (ifb_ri_tasklet [ifb]) from [<c03242dc>] (tasklet_action+0xa4/0x130)
[ 2138.126141] [<c03242dc>] (tasklet_action) from [<c03015c8>] (__do_softirq+0xf0/0x264)
[ 2138.134732] [<c03015c8>] (__do_softirq) from [<c0324810>] (irq_exit+0xdc/0x148)
[ 2138.142545] [<c0324810>] (irq_exit) from [<c030e4cc>] (handle_IPI+0xb4/0x1ac)
[ 2138.149662] [<c030e4cc>] (handle_IPI) from [<c03014b8>] (gic_handle_irq+0x9c/0xb8)
[ 2138.156952] [<c03014b8>] (gic_handle_irq) from [<c030c08c>] (__irq_svc+0x6c/0x90)
[ 2138.164406] Exception stack(0xdd461f80 to 0xdd461fc8)
[ 2138.171997] 1f80: 00000001 00000000 00000000 c03151e0 ffffe000 c0b03cbc c0b03c6c 00000000
[ 2138.177036] 1fa0: 00000000 512f04d0 00000000 00000000 dd461fc8 dd461fd0 c030862c c0308630
[ 2138.185165] 1fc0: 60000013 ffffffff
[ 2138.193329] [<c030c08c>] (__irq_svc) from [<c0308630>] (arch_cpu_idle+0x38/0x44)
[ 2138.196635] [<c0308630>] (arch_cpu_idle) from [<c035dde8>] (do_idle+0xe8/0x1bc)
[ 2138.204266] [<c035dde8>] (do_idle) from [<c035e130>] (cpu_startup_entry+0x1c/0x20)
[ 2138.211296] [<c035e130>] (cpu_startup_entry) from [<423017cc>] (0x423017cc)


U-Boot 2012.07 [local,local] (Sep 03 2015 - 17:33:28)

U-boot 2012.07 dni1 V0.4 for DNI HW ID: 29764958 NOR flash 0MB; NAND flash 128MB; RAM 512MB; 1st Radio 4x4; 2nd Radio 4x4; Cascade
smem ram ptable found: ver: 0 len: 5
...
[ 1959.222624] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 2044.726720] ath10k_warn: 14 callbacks suppressed
[ 2044.726753] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 2044.730547] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 2044.737596] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 2044.744787] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 2044.752171] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 2044.759480] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 2044.766687] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 2044.774034] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 2044.781347] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 2044.788630] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 2065.797413] INFO: rcu_sched self-detected stall on CPU
[ 2065.797484] 	1-...: (1 GPs behind) idle=922/140000000000001/0 softirq=12309/12310 fqs=2 
[ 2065.801469] 	 (t=2100 jiffies g=5877 c=5876 q=24)
[ 2065.809724] rcu_sched kthread starved for 2095 jiffies! g5877 c5876 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=0
[ 2065.814324] rcu_sched       I    0     8      2 0x00000000
[ 2065.824602] [<c07f6148>] (__schedule) from [<c07f6268>] (schedule+0x88/0xb0)
[ 2065.829965] [<c07f6268>] (schedule) from [<c07fa568>] (schedule_timeout+0x254/0x280)
[ 2065.837182] [<c07fa568>] (schedule_timeout) from [<c0377e30>] (rcu_gp_kthread+0x44c/0x868)
[ 2065.844900] [<c0377e30>] (rcu_gp_kthread) from [<c033e4e4>] (kthread+0x164/0x16c)
[ 2065.852973] [<c033e4e4>] (kthread) from [<c0307d28>] (ret_from_fork+0x14/0x2c)
[ 2065.860514] NMI backtrace for cpu 1
[ 2065.867618] CPU: 1 PID: 14 Comm: ksoftirqd/1 Not tainted 4.14.141 #0
[ 2065.870999] Hardware name: Generic DT based system
[ 2065.877631] [<c030f2c4>] (unwind_backtrace) from [<c030b4c0>] (show_stack+0x14/0x20)
[ 2065.882229] [<c030b4c0>] (show_stack) from [<c07e0898>] (dump_stack+0x88/0x9c)
[ 2065.890119] [<c07e0898>] (dump_stack) from [<c07e6b44>] (nmi_cpu_backtrace+0xc4/0xd8)
[ 2065.897146] [<c07e6b44>] (nmi_cpu_backtrace) from [<c07e6bec>] (nmi_trigger_cpumask_backtrace+0x94/0x138)
[ 2065.905048] [<c07e6bec>] (nmi_trigger_cpumask_backtrace) from [<c0379564>] (rcu_dump_cpu_stacks+0x8c/0xcc)
[ 2065.914597] [<c0379564>] (rcu_dump_cpu_stacks) from [<c0378a78>] (rcu_check_callbacks+0x358/0x858)
[ 2065.924149] [<c0378a78>] (rcu_check_callbacks) from [<c037cdf4>] (update_process_times+0x3c/0x70)
[ 2065.933101] [<c037cdf4>] (update_process_times) from [<c038dea8>] (tick_sched_timer+0x48/0xa4)
[ 2065.942036] [<c038dea8>] (tick_sched_timer) from [<c037d764>] (__hrtimer_run_queues+0xdc/0x1a8)
[ 2065.950537] [<c037d764>] (__hrtimer_run_queues) from [<c037dea0>] (hrtimer_interrupt+0xc0/0x230)
[ 2065.959130] [<c037dea0>] (hrtimer_interrupt) from [<c06a8574>] (msm_timer_interrupt+0x38/0x48)
[ 2065.968156] [<c06a8574>] (msm_timer_interrupt) from [<c036e140>] (handle_percpu_devid_irq+0x84/0x174)
[ 2065.976584] [<c036e140>] (handle_percpu_devid_irq) from [<c03689a4>] (generic_handle_irq+0x28/0x40)
[ 2065.985869] [<c03689a4>] (generic_handle_irq) from [<c0368ffc>] (__handle_domain_irq+0xa4/0xc8)
[ 2065.994718] [<c0368ffc>] (__handle_domain_irq) from [<c0301488>] (gic_handle_irq+0x6c/0xb8)
[ 2066.003397] [<c0301488>] (gic_handle_irq) from [<c030c08c>] (__irq_svc+0x6c/0x90)
[ 2066.011717] Exception stack(0xdd471aa0 to 0xdd471ae8)
[ 2066.019391] 1aa0: 651774f6 fffffff6 00000002 db8ff094 dbe68be0 dbe68cc8 00000002 dbe68ce0
[ 2066.024432] 1ac0: 651773f6 fffffff6 00000100 00000000 dbe68ce0 dd471af0 00000458 bf7892fc
[ 2066.032560] 1ae0: 00000013 ffffffff
[ 2066.040926] [<c030c08c>] (__irq_svc) from [<bf7892fc>] (ieee80211_next_txq+0x98/0x134 [mac80211])
[ 2066.044410] [<bf7892fc>] (ieee80211_next_txq [mac80211]) from [<bf83b388>] (ath10k_mac_op_wake_tx_queue+0x44/0xd4 [ath10k_core])
[ 2066.053368] [<bf83b388>] (ath10k_mac_op_wake_tx_queue [ath10k_core]) from [<bf78c38c>] (ieee80211_unreserve_tid+0x73c/0x106c [mac80211])
[ 2066.064999] [<bf78c38c>] (ieee80211_unreserve_tid [mac80211]) from [<bf790760>] (__ieee80211_subif_start_xmit+0x824/0xa3c [mac80211])
[ 2066.077239] [<bf790760>] (__ieee80211_subif_start_xmit [mac80211]) from [<bf790c64>] (ieee80211_subif_start_xmit+0x2ec/0x30c [mac80211])
[ 2066.088993] [<bf790c64>] (ieee80211_subif_start_xmit [mac80211]) from [<c06d6670>] (dev_hard_start_xmit+0xc8/0x154)
[ 2066.101151] [<c06d6670>] (dev_hard_start_xmit) from [<c06d6e1c>] (__dev_queue_xmit+0x610/0x790)
[ 2066.111311] [<c06d6e1c>] (__dev_queue_xmit) from [<c07be768>] (br_dev_queue_push_xmit+0x118/0x13c)
[ 2066.119984] [<c07be768>] (br_dev_queue_push_xmit) from [<c07bbea8>] (br_dev_xmit+0x2a8/0x2e4)
[ 2066.129012] [<c07bbea8>] (br_dev_xmit) from [<c06d6670>] (dev_hard_start_xmit+0xc8/0x154)
[ 2066.137604] [<c06d6670>] (dev_hard_start_xmit) from [<c06d6e1c>] (__dev_queue_xmit+0x610/0x790)
[ 2066.145765] [<c06d6e1c>] (__dev_queue_xmit) from [<c071d268>] (ip_finish_output2+0x2b8/0x32c)
[ 2066.154267] [<c071d268>] (ip_finish_output2) from [<c071de90>] (ip_output+0xa0/0xb4)
[ 2066.162944] [<c071de90>] (ip_output) from [<c071a738>] (ip_forward+0x320/0x3a4)
[ 2066.170754] [<c071a738>] (ip_forward) from [<c071964c>] (ip_rcv+0x268/0x290)
[ 2066.177788] [<c071964c>] (ip_rcv) from [<c06d5300>] (__netif_receive_skb_core+0xa20/0xbbc)
[ 2066.185091] [<c06d5300>] (__netif_receive_skb_core) from [<c06d77e0>] (netif_receive_skb_internal+0xc0/0xd4)
[ 2066.193234] [<c06d77e0>] (netif_receive_skb_internal) from [<bf307560>] (ifb_ri_tasklet+0x130/0x2d0 [ifb])
[ 2066.203244] [<bf307560>] (ifb_ri_tasklet [ifb]) from [<c03242dc>] (tasklet_action+0xa4/0x130)
[ 2066.212598] [<c03242dc>] (tasklet_action) from [<c03015c8>] (__do_softirq+0xf0/0x264)
[ 2066.221189] [<c03015c8>] (__do_softirq) from [<c03244f0>] (run_ksoftirqd+0x34/0x64)
[ 2066.229018] [<c03244f0>] (run_ksoftirqd) from [<c0341958>] (smpboot_thread_fn+0x1a8/0x1d0)
[ 2066.236473] [<c0341958>] (smpboot_thread_fn) from [<c033e4e4>] (kthread+0x164/0x16c)
[ 2066.244806] [<c033e4e4>] (kthread) from [<c0307d28>] (ret_from_fork+0x14/0x2c)


U-Boot 2012.07 [local,local] (Sep 03 2015 - 17:33:28)

U-boot 2012.07 dni1 V0.4 for DNI HW ID: 29764958 NOR flash 0MB; NAND flash 128MB; RAM 512MB; 1st Radio 4x4; 2nd Radio 4x4; Cascade
smem ram ptable found: ver: 0 len: 5
DRAM:  491 MiB
NAND:  SF: Unsupported manufacturer 00
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
...
[ 4136.836347] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4577.295230] ath10k_warn: 74 callbacks suppressed
[ 4577.295248] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4577.298971] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4577.306670] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4577.313344] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4619.346522] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4619.346599] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4619.352852] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4619.359999] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4619.367340] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4619.374644] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4619.381921] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4619.389468] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4619.396469] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 4619.403768] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon


U-Boot 2012.07 [local,local] (Sep 03 2015 - 17:33:28)

U-boot 2012.07 dni1 V0.4 for DNI HW ID: 29764958 NOR flash 0MB; NAND flash 128MB; RAM 512MB; 1st Radio 4x4; 2nd Radio 4x4; Cascade
smem ram ptable found: ver: 0 len: 5
...




01.09.20192476KernelBuild FailureVery LowLowModule error in kernel 4.19TrunkUnconfirmed Task Description

NF_NAT_REDIRECT is no longer a module in newer kernel

net/sched/Kconfig:44: warning: menuconfig statement without prompt
.config:3973:warning: symbol value ‘m’ invalid for NF_NAT_REDIRECT

29.08.20192474Base systemBug ReportVery LowLowping: When IPv6-in-IPv4 tunnel interface is specified a...openwrt-18.06Unconfirmed Task Description

Environment: OpenWrt 18.06.4 r7808-ef686b7292 / LuCI openwrt-18.06 branch (git-19.170.32094-4d6d8bc)

Description:

When IPv6-in-IPv4 tunnel interface is specified as a source interface, link local IPv6 address is used instead of a public IPv6 address.

root@OpenWRT:~# ifconfig
6in4-wan6 Link encap:IPv6-in-IPv4
          inet6 addr: fe80::xxxx:xxxx/64 Scope:Link
          inet6 addr: 2001:xxx:xx:xxx::2/64 Scope:Global
          UP POINTOPOINT RUNNING NOARP  MTU:1280  Metric:1
          RX packets:2551 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3885 errors:0 dropped:689 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
                  RX bytes:217476 (212.3 KiB)  TX bytes:525551 (513.2 KiB)

ICMP request are sent with a link local address set as a source:

root@OpenWRT:~# ping -I 6in4-wan6 -c 3 2001:4860:4860::8888
PING 2001:4860:4860::8888 (2001:4860:4860::8888): 56 data bytes

--- 2001:4860:4860::8888 ping statistics ---
3 packets transmitted, 0 packets received, 100% packet loss

Expected behavior (public IPv6 address is used as a source address):

root@OpenWRT:~# ping -I 2001:xxx:xx:xxx::2 -c 3 2001:4860:4860::8888
PING 2001:4860:4860::8888 (2001:4860:4860::8888) from 2001:470:70:46b::2: 56 data bytes
64 bytes from 2001:4860:4860::8888: seq=0 ttl=58 time=15.708 ms
64 bytes from 2001:4860:4860::8888: seq=1 ttl=58 time=17.387 ms
64 bytes from 2001:4860:4860::8888: seq=2 ttl=58 time=15.723 ms

--- 2001:4860:4860::8888 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 15.708/16.272/17.387 ms
29.08.20192473KernelBug ReportVery LowHighUsb not working on fonera 2.0n (ramips/rt305x)openwrt-18.06Unconfirmed Task Description

On openwrt 18.06.4 usb is no longer working. I’ve tried with 18.06.02 built by my own with the same result. With 18.06.1 everything was working correctly.


29.08.20192472KernelBug ReportVery LowMediumnetdev led trigger on wwan0 actived even the qmi has no...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on Orange PI One based board
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

This happens with Quectel EC25 LTE modem (USB interface, 2c7c:0125). The board is based on Allwinner H3, using openwrt-19.07-snapshot (kernel 4.14.140).

Following is the configuration, that 4g_wan will not be enabled when booted. But the LED binded with wwan0 been actived even the 4g_wan does not be enabled.

config interface '4g_wan'
	option proto 'qmi'
	option device '/dev/cdc-wdm0'
	option auto '0'
config led 'led_modem'
	option name 'modem'
	option sysfs 'kooiot:green:modem'
	option trigger 'netdev'
	option mode 'link tx rx'
	option default '0'
	option dev 'wwan0'

Once we enabled the 4g_wan, and then disabled the 4g_wan, the LED will be turned off.

When system booted, ifconfig -a shows:

wwan0     Link encap:Ethernet  HWaddr AA:C8:51:F9:2A:67  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

when 4g_wan enabled and disabled, ifconfig -a shows:

wwan0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          POINTOPOINT NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:636 (636.0 B)  TX bytes:1192 (1.1 KiB)
27.08.20192467Base systemBug ReportVery LowMediumRemote desktop unusale with flow offloadingopenwrt-18.06Unconfirmed Task Description

Hi,

I have latest stable openwrt installed to my Xiaomi R3G router.
I have a port forward to a windows RDP.
When Flow offloading (Software flow offloading or both Hardware and Software flow offloading) enabled the RDP connection became slow and laggy, reconnects often.

If I disable flow offload, everything works fine.

I’ll try to look tcpdump/wireshark captures.

Thanks,
Laszlo


27.08.20192466Base systemBug ReportVery LowLowDFS channel iwinfo dev scan hangTrunkUnconfirmed Task Description

when a wireless card work in ap mode
the system have only one card
the device name wlan0
the ap worked at dfs channe such as 54 56 58 60 62 64
run iwinfo wlan1 scan
the cmd hang block

 


25.08.20192464Base systemBug ReportVery LowLownetifd: changing metric, ip4table or defaultroute flush...openwrt-18.06Unconfirmed Task Description

Tested device: Virtual x86_64
Software versions:
openwrt 18.06.4
netifd 2019-01-31-a2aba5c7-2.1

Reproduce:
* Use babeld as dynamic routing daemon.
* Verify that the main table contains routes inserted by babeld.
* Change one of metric, ip4table and defaultroute on a interface which have babeld’s routes in the main table.
* Run /etc/init.d/network reload
* The routes inserted by babeld for the above interface are now gone, which was unexpected.

It seems to be caused by the following section in interface.c:

        UPDATE(metric, reload_ip);
        UPDATE(proto_ip.no_defaultroute, reload_ip);
        UPDATE(ip4table, reload_ip);
        UPDATE(ip6table, reload_ip);
...
        if (reload_ip) {
                bool config_ip_enabled = if_old->config_ip.enabled;
                bool proto_ip_enabled = if_old->proto_ip.enabled;

                interface_ip_set_enabled(&if_old->config_ip, false);
                interface_ip_set_enabled(&if_old->proto_ip, false);
                interface_ip_set_enabled(&if_old->proto_ip, proto_ip_enabled);
                interface_ip_set_enabled(&if_old->config_ip, config_ip_enabled);
        }
24.08.20192462Base systemBug ReportVery LowHighwrt32x WIFI was breaking on 2 sec I did not get full co...AllUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on wrt32x
- Software versions of OpenWrt 19.07

I tested these images on wrt32x and wrt3600, but unfortunately I gave up there was a problem on wrt32x WIFI was breaking the computer and in the relayd wrt3600 → wrt32x the maximum speed on the bridge is 10Mb. I do not observe this for version 18.06 (images downloaded from eko.one.pl). And after disconnection I did not get full connection speed of 866.7 Mb / s to the router. Although I will say that options 19.07 in Lucia look encouraging.

19.08.20192454Base systemBug ReportVery LowLowlibopenssl: Compile error with "Enable Engine support" ...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

All

- Software versions of OpenWrt/LEDE release, packages, etc.

Latest OpenWRT Trunk

- Steps to reproduce

Try to build a image with “Enable Engine support” enabled and the compilation will spit out an error. Tried to debug it but couldn’t

 configure: WARNING: rpmbuild not found, some optional functionalities will be missing
configure: creating ./config.status
config.status: creating Makefile

quilt version 0.65 configured.

Using '/mnt/sdb/ss_mod/staging_dir/host' for installation prefix.

Report bugs to quilt-dev@nongnu.org
[ -f /mnt/sdb/ss_mod/build_dir/host/quilt-0.65/Makefile ]
touch /mnt/sdb/ss_mod/build_dir/host/quilt-0.65/.configured
make -C /mnt/sdb/ss_mod/build_dir/host/quilt-0.65 SHELL="bash" all
make[4]: Entering directory '/mnt/sdb/ss_mod/build_dir/host/quilt-0.65'
bin/quilt.in -> bin/quilt
bin/guards.in -> bin/guards
quilt/mail.in -> quilt/mail
quilt/upgrade.in -> quilt/upgrade
quilt/refresh.in -> quilt/refresh
quilt/fold.in -> quilt/fold
quilt/files.in -> quilt/files
quilt/revert.in -> quilt/revert
quilt/top.in -> quilt/top
quilt/header.in -> quilt/header
quilt/remove.in -> quilt/remove
quilt/annotate.in -> quilt/annotate
quilt/diff.in -> quilt/diff
quilt/applied.in -> quilt/applied
quilt/graph.in -> quilt/graph
quilt/edit.in -> quilt/edit
quilt/pop.in -> quilt/pop
quilt/fork.in -> quilt/fork
quilt/delete.in -> quilt/delete
quilt/new.in -> quilt/new
quilt/import.in -> quilt/import
quilt/previous.in -> quilt/previous
quilt/grep.in -> quilt/grep
quilt/series.in -> quilt/series
quilt/patches.in -> quilt/patches
quilt/snapshot.in -> quilt/snapshot
quilt/add.in -> quilt/add
quilt/push.in -> quilt/push
quilt/setup.in -> quilt/setup
quilt/rename.in -> quilt/rename
quilt/next.in -> quilt/next
quilt/unapplied.in -> quilt/unapplied
quilt/scripts/patchfns.in -> quilt/scripts/patchfns
quilt/scripts/inspect-wrapper.in -> quilt/scripts/inspect-wrapper
quilt/scripts/dependency-graph.in -> quilt/scripts/dependency-graph
quilt/scripts/edmail.in -> quilt/scripts/edmail
quilt/scripts/remove-trailing-ws.in -> quilt/scripts/remove-trailing-ws
quilt/scripts/backup-files.in -> quilt/scripts/backup-files
README.in -> README
quilt.1.in -> quilt.1
/usr/bin/pod2man bin/guards > bin/guards.1
rm -f po/quilt.pot; touch po/quilt.pot
for file in bin/guards.in bin/quilt.in bin/patch-wrapper.in quilt/mail.in quilt/upgrade.in quilt/refresh.in quilt/fold.in quilt/files.in quilt/revert.in quilt/top.in quilt/header.in quilt/remove.in quilt/annotate.in quilt/diff.in quilt/applied.in quilt/graph.in quilt/edit.in quilt/pop.in quilt/fork.in quilt/delete.in quilt/new.in quilt/import.in quilt/previous.in quilt/grep.in quilt/series.in quilt/patches.in quilt/snapshot.in quilt/add.in quilt/push.in quilt/setup.in quilt/rename.in quilt/next.in quilt/unapplied.in compat/column.in compat/date.in compat/getopt.in compat/mktemp.in compat/sendmail.in quilt/scripts/backup-files.in quilt/scripts/patchfns.in quilt/scripts/remove-trailing-ws.in quilt/scripts/inspect-wrapper.in quilt/scripts/edmail.in quilt/scripts/dependency-graph.in ; do						\
  if test -n "`/mnt/sdb/ss_mod/staging_dir/host/bin/sed -ne '1{ /@BASH''@/p }' $file`"		\
       -o "$file" = quilt/scripts/patchfns.in; then		\
    /usr/bin/env bash --dump-po-strings $file ;				\
  elif test -n "`/mnt/sdb/ss_mod/staging_dir/host/bin/sed -ne '1{ /@PERL''@/p }' $file`"; then	\
    /usr/bin/xgettext --from-code=UTF-8 --omit-header --language=Perl	\
		--keyword=_ -o - $file;			\
  else								\
    echo "Don't know how to handle $file" >&2 ;		\
    exit 1;							\
  fi								\
done								\
|/usr/bin/msguniq							\
|/usr/bin/msgcat --force-po -F - po/quilt.pot -o po/quilt.pot
/usr/bin/msgmerge -o po/fr.po po/fr.po po/quilt.pot
..................... done.
/usr/bin/msgfmt --statistics -o po/fr.mo po/fr.po
182 translated messages.
/usr/bin/msgmerge -o po/de.po po/de.po po/quilt.pot
..................... done.
/usr/bin/msgfmt --statistics -o po/de.mo po/de.po
182 translated messages.
/usr/bin/msgmerge -o po/ja.po po/ja.po po/quilt.pot
...................... done.
/usr/bin/msgfmt --statistics -o po/ja.mo po/ja.po
182 translated messages.
/usr/bin/msgmerge -o po/ru.po po/ru.po po/quilt.pot
...................... done.
/usr/bin/msgfmt --statistics -o po/ru.mo po/ru.po
182 translated messages.
make[4]: Leaving directory '/mnt/sdb/ss_mod/build_dir/host/quilt-0.65'
touch /mnt/sdb/ss_mod/build_dir/host/quilt-0.65/.built
make -C /mnt/sdb/ss_mod/build_dir/host/quilt-0.65 SHELL="bash" install
make[4]: Entering directory '/mnt/sdb/ss_mod/build_dir/host/quilt-0.65'
/usr/bin/install -c -d /mnt/sdb/ss_mod/staging_dir/host/bin
/usr/bin/install -c -m 755 bin/quilt bin/guards /mnt/sdb/ss_mod/staging_dir/host/bin/
/usr/bin/install -c -d /mnt/sdb/ss_mod/staging_dir/host/share/quilt
/usr/bin/install -c -m 755 quilt/mail quilt/add quilt/upgrade quilt/patches quilt/refresh quilt/fold quilt/diff quilt/files quilt/revert quilt/top quilt/header quilt/remove quilt/annotate quilt/applied quilt/graph quilt/edit quilt/pop quilt/fork quilt/delete quilt/new quilt/previous quilt/grep quilt/series quilt/import quilt/snapshot quilt/push quilt/setup quilt/rename quilt/next quilt/unapplied /mnt/sdb/ss_mod/staging_dir/host/share/quilt/
/usr/bin/install -c -d /mnt/sdb/ss_mod/staging_dir/host/share/quilt/scripts
/usr/bin/install -c -m 755 quilt/scripts/inspect-wrapper quilt/scripts/dependency-graph quilt/scripts/edmail quilt/scripts/remove-trailing-ws quilt/scripts/backup-files		\
	   /mnt/sdb/ss_mod/staging_dir/host/share/quilt/scripts
/usr/bin/install -c -m 644 quilt/scripts/patchfns quilt/scripts/utilfns	\
	   /mnt/sdb/ss_mod/staging_dir/host/share/quilt/scripts
/usr/bin/install -c -d /mnt/sdb/ss_mod/staging_dir/host/share/doc/quilt/
/usr/bin/install -c -m 644 doc/README					\
	   /mnt/sdb/ss_mod/staging_dir/host/share/doc/quilt/
/usr/bin/install -c -m 644 doc/quilt.pdf doc/README.MAIL			\
	   /mnt/sdb/ss_mod/staging_dir/host/share/doc/quilt/
/usr/bin/install -c -d /mnt/sdb/ss_mod/staging_dir/host/share/man/man1
/usr/bin/install -c -m 644 doc/quilt.1 bin/guards.1 /mnt/sdb/ss_mod/staging_dir/host/share/man/man1/
/usr/bin/install -c -d /mnt/sdb/ss_mod/staging_dir/host/etc
/usr/bin/install -c -d /mnt/sdb/ss_mod/staging_dir/host/etc/bash_completion.d
/usr/bin/install -c -m 644 bash_completion				\
	   /mnt/sdb/ss_mod/staging_dir/host/etc/bash_completion.d/quilt
/usr/bin/install -c -m 644 quilt.quiltrc /mnt/sdb/ss_mod/staging_dir/host/etc/
/usr/bin/install -c -d /mnt/sdb/ss_mod/staging_dir/host/share/emacs/site-lisp/
/usr/bin/install -c -m 644 lib/quilt.el /mnt/sdb/ss_mod/staging_dir/host/share/emacs/site-lisp/
for lang in fr de ja ru ; do					\
	dir=/mnt/sdb/ss_mod/staging_dir/host/share/locale/$lang/LC_MESSAGES;	\
	/usr/bin/install -c -d $dir;					\
	/usr/bin/install -c -m 644 po/$lang.mo				\
	    $dir/quilt.mo ;					\
done
rm -rf /mnt/sdb/ss_mod/staging_dir/host/share/quilt/compat
make[4]: Leaving directory '/mnt/sdb/ss_mod/build_dir/host/quilt-0.65'
mkdir -p /mnt/sdb/ss_mod/staging_dir/host/stamp
touch /mnt/sdb/ss_mod/build_dir/host/quilt-0.65/.built
touch /mnt/sdb/ss_mod/staging_dir/host/stamp/.quilt_installed
make[3]: Leaving directory '/mnt/sdb/ss_mod/tools/quilt'
time: tools/quilt/compile#3.52#1.32#6.42
make[3]: Entering directory '/mnt/sdb/ss_mod/tools/padjffs2'
mkdir -p /mnt/sdb/ss_mod/build_dir/host/padjffs2-1
cp -fpR ./src/* /mnt/sdb/ss_mod/build_dir/host/padjffs2-1/
find /mnt/sdb/ss_mod/build_dir/host/padjffs2-1 -name .svn | xargs -r rm -rf
touch /mnt/sdb/ss_mod/build_dir/host/padjffs2-1/.preparedecc7edeb6ada6b3bdcdbd188ed1d7abb_6664517399ebbbc92a37c5bb081b5c53
touch /mnt/sdb/ss_mod/build_dir/host/padjffs2-1/.configured
make -C /mnt/sdb/ss_mod/build_dir/host/padjffs2-1
make[4]: Entering directory '/mnt/sdb/ss_mod/build_dir/host/padjffs2-1'
gcc  -Wall -Werror -c -o padjffs2.o padjffs2.c
gcc  -o padjffs2 padjffs2.o
make[4]: Leaving directory '/mnt/sdb/ss_mod/build_dir/host/padjffs2-1'
touch /mnt/sdb/ss_mod/build_dir/host/padjffs2-1/.built
cp -fpR /mnt/sdb/ss_mod/build_dir/host/padjffs2-1/padjffs2 /mnt/sdb/ss_mod/staging_dir/host/bin/
mkdir -p /mnt/sdb/ss_mod/staging_dir/host/stamp
touch /mnt/sdb/ss_mod/build_dir/host/padjffs2-1/.built
touch /mnt/sdb/ss_mod/staging_dir/host/stamp/.padjffs2_installed
make[3]: Leaving directory '/mnt/sdb/ss_mod/tools/padjffs2'
time: tools/padjffs2/compile#0.21#0.08#0.43
make[3]: Entering directory '/mnt/sdb/ss_mod/tools/mm-macros'
. /mnt/sdb/ss_mod/include/shell.sh; xzcat /mnt/sdb/ss_mod/dl/mm-common-0.9.12.tar.xz | tar -C /mnt/sdb/ss_mod/build_dir/host/mm-common-0.9.12/.. -xf -
[ ! -d ./src/ ] || cp -fpR ./src/* /mnt/sdb/ss_mod/build_dir/host/mm-common-0.9.12
touch /mnt/sdb/ss_mod/build_dir/host/mm-common-0.9.12/.preparedb57a3a4d3d4ac73305a42c848cc7171b_6664517399ebbbc92a37c5bb081b5c53
(cd /mnt/sdb/ss_mod/build_dir/host/mm-common-0.9.12/; if [ -x configure ]; then cp -fpR /mnt/sdb/ss_mod/scripts/config.{guess,sub} /mnt/sdb/ss_mod/build_dir/host/mm-common-0.9.12// && CC="gcc" CFLAGS="-O2 -I/mnt/sdb/ss_mod/staging_dir/host/include " CXX="g++" CPPFLAGS="-I/mnt/sdb/ss_mod/staging_dir/host/include " LDFLAGS="-L/mnt/sdb/ss_mod/staging_dir/host/lib " CONFIG_SHELL="/usr/bin/env bash"  bash ./configure --target=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --program-prefix="" --program-suffix="" --prefix=/mnt/sdb/ss_mod/staging_dir/host --exec-prefix=/mnt/sdb/ss_mod/staging_dir/host --sysconfdir=/mnt/sdb/ss_mod/staging_dir/host/etc --localstatedir=/mnt/sdb/ss_mod/staging_dir/host/var --sbindir=/mnt/sdb/ss_mod/staging_dir/host/bin ; fi )
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /mnt/sdb/ss_mod/staging_dir/host/bin/sed
checking for tar... tar
checking whether to download libstdc++ tags... no
checking for curl... no
checking for wget... wget
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doctags/mm-common-libstdc++.pc
config.status: creating doctags/mm-common-libstdc++-uninstalled.pc
config.status: creating macros/mm-common.m4
config.status: creating util/mm-common-prepare
config.status: creating util/mm-common-util.pc
config.status: creating util/mm-common-util-uninstalled.pc
touch /mnt/sdb/ss_mod/build_dir/host/mm-common-0.9.12/.configured
CFLAGS="-O2 -I/mnt/sdb/ss_mod/staging_dir/host/include " CPPFLAGS="-I/mnt/sdb/ss_mod/staging_dir/host/include " CXXFLAGS="" LDFLAGS="-L/mnt/sdb/ss_mod/staging_dir/host/lib " make -j1 -C /mnt/sdb/ss_mod/build_dir/host/mm-common-0.9.12  
make[4]: Entering directory '/mnt/sdb/ss_mod/build_dir/host/mm-common-0.9.12'
/mnt/sdb/ss_mod/staging_dir/host/bin/sed 's|[@]PACKAGE_STRING[@]|mm-common 0.9.12|g;s|[@]docdir[@]|/mnt/sdb/ss_mod/staging_dir/host/share/doc/mm-common|g' ./util/mm-common-prepare.1.in >util/mm-common-prepare.1
(cd . >/dev/null && tar chof - skeletonmm/autogen.sh skeletonmm/codegen/generate_defs_and_docs.sh skeletonmm/.gitignore skeletonmm/AUTHORS skeletonmm/COPYING skeletonmm/ChangeLog skeletonmm/Makefile.am skeletonmm/README skeletonmm/configure.ac skeletonmm/skeletonmm.doap skeletonmm/build/.gitignore skeletonmm/codegen/Makefile.am skeletonmm/codegen/extradefs/generate_extra_defs_skeleton.cc skeletonmm/codegen/m4/convert.m4 skeletonmm/codegen/m4/convert_skeleton.m4 skeletonmm/codegen/m4/filelist.am skeletonmm/doc/Makefile.am skeletonmm/doc/reference/.gitignore skeletonmm/doc/reference/Doxyfile.in skeletonmm/examples/.gitignore skeletonmm/examples/Makefile.am skeletonmm/examples/example/example.cc skeletonmm/skeleton/.gitignore skeletonmm/skeleton/skeletonmm-uninstalled.pc.in skeletonmm/skeleton/skeletonmm.h skeletonmm/skeleton/skeletonmm.pc.in skeletonmm/skeleton/skeletonmmconfig.h.in skeletonmm/skeleton/skeletonmm/Makefile.am skeletonmm/skeleton/skeletonmm/filelist.am skeletonmm/skeleton/skeletonmm/wrap_init.h skeletonmm/skeleton/skeletonmm/private/.gitignore skeletonmm/skeleton/src/Makefile.am skeletonmm/skeleton/src/filelist.am skeletonmm/skeleton/src/skeleton.ccg skeletonmm/skeleton/src/skeleton.defs skeletonmm/skeleton/src/skeleton.hg skeletonmm/skeleton/src/skeleton_docs.xml skeletonmm/skeleton/src/skeleton_enum.defs skeletonmm/skeleton/src/skeleton_method.defs skeletonmm/skeleton/src/skeleton_signal.defs skeletonmm/skeleton/src/skeleton_vfunc.defs) | gzip -c -n >skeletonmm.tar.gz
make[4]: Leaving directory '/mnt/sdb/ss_mod/build_dir/host/mm-common-0.9.12'
touch /mnt/sdb/ss_mod/build_dir/host/mm-common-0.9.12/.built
install -d -m0755 /mnt/sdb/ss_mod/staging_dir/host/share/aclocal
install -m0644 /mnt/sdb/ss_mod/build_dir/host/mm-common-0.9.12/macros/*.m4 /mnt/sdb/ss_mod/staging_dir/host/share/aclocal/
mkdir -p /mnt/sdb/ss_mod/staging_dir/host/stamp
touch /mnt/sdb/ss_mod/build_dir/host/mm-common-0.9.12/.built
touch /mnt/sdb/ss_mod/staging_dir/host/stamp/.mm-macros_installed
make[3]: Leaving directory '/mnt/sdb/ss_mod/tools/mm-macros'
time: tools/mm-macros/compile#0.78#0.35#2.27
make[3]: Entering directory '/mnt/sdb/ss_mod/tools/scons'
./files/pywrap.sh /mnt/sdb/ss_mod/build_dir/host/scons-3.1.1/setup.py install --prefix=/mnt/sdb/ss_mod/staging_dir/host
Traceback (most recent call last):
  File "/mnt/sdb/ss_mod/build_dir/host/scons-3.1.1/setup.py", line 26, in <module>
    import distutils.command.build_scripts
ModuleNotFoundError: No module named 'distutils.command'
make[3]: *** [Makefile:35: /mnt/sdb/ss_mod/staging_dir/host/stamp/.scons_installed] Error 1
make[3]: Leaving directory '/mnt/sdb/ss_mod/tools/scons'
time: tools/scons/compile#0.24#0.06#0.35
make[2]: *** [tools/Makefile:159: tools/scons/compile] Error 2
make[2]: Leaving directory '/mnt/sdb/ss_mod'
make[1]: *** [tools/Makefile:155: /mnt/sdb/ss_mod/staging_dir/target-arm_cortex-a9+vfpv3_musl_eabi/stamp/.tools_compile_yynyynnyyynyyyyynyynnyyyynyyyyyyyyyyyyyyynyynynnyyynnyyy] Error 2
make[1]: Leaving directory '/mnt/sdb/ss_mod'
make: *** [/mnt/sdb/ss_mod/include/toplevel.mk:218: world] Error 2
19.08.20192452Base systemBug ReportVery LowLowConfig backup archive contains uhttpd key and certifica...AllUnconfirmed Task Description

Device problem occurs on: All
Software versions of OpenWrt/LEDE release, packages, etc: Every version I tried since at least Barrier Breaker
Steps to reproduce:
1. Install LuCI
2. Log in to LuCI and go to System - Backup/Flash Firmware
3. Click “Generate archive” and download the config backup archive (backup-hostname-date.tar.gz) file
4. List the contents of that archive (ie. tar -tvzf backup-hostname-date.tar.gz)
5. etc/uhttpd.key and etc/uhttpd.crt files are contained twice in the archive

It’s just a cosmetic bug, but it is one I have been wondering about for years :)

16.08.20192446Base systemBug ReportVery LowLowbooting with qemu, firewall fails to protect router ser...TrunkWaiting on reporter Task Description

Started latest malta snapshot with qemu, did not change any configuration.
IPv6 wan interface gets its link-local address.
Firewall allows connections to this address from wan.
Firewall restart helps.

 
tunctl
brctl addbr testbr
brctl addif testbr tap0
ip link set dev tap0 up
ip link set dev testbr up

qemu-system-mips -kernel  openwrt-malta-be-vmlinux.elf 
-hda openwrt-malta-be-rootfs-ext4.img 
-append "root=/dev/sda console=ttyS0" 
-nographic -m 64 
-net nic,model=pcnet 
-net tap,ifname=tap0,script=no,downscript=no
root@OpenWrt:/# ip6tables -nvL INPUT
Chain INPUT (policy ACCEPT 4 packets, 208 bytes)
 pkts bytes target     prot opt in     out     source               destination         
	0     0 ACCEPT     all      lo     *       ::/0                 ::/0                 /* !fw3 */
	4   208 input_rule  all      *      *       ::/0                 ::/0                 /* !fw3: Custom input rule chain */
	0     0 ACCEPT     all      *      *       ::/0                 ::/0                 ctstate RELATED,ESTABLISHED /* !fw3 */
	0     0 syn_flood  tcp      *      *       ::/0                 ::/0                 tcp flags:0x17/0x02 /* !fw3 */
 

After firewall restart (counters are different due to different runs)

Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
	0     0 ACCEPT     all      lo     *       ::/0                 ::/0                 /* !fw3 */
	1    80 input_rule  all      *      *       ::/0                 ::/0                 /* !fw3: Custom input rule chain */
	0     0 ACCEPT     all      *      *       ::/0                 ::/0                 ctstate RELATED,ESTABLISHED /* !fw3 */
	1    80 syn_flood  tcp      *      *       ::/0                 ::/0                 tcp flags:0x17/0x02 /* !fw3 */
	1    80 zone_wan_input  all      eth0   *       ::/0                 ::/0                 /* !fw3 */
16.08.20192445KernelBug ReportVery LowHighOmega2 reboot hangTrunkUnconfirmed Task Description

- Omega2
- OpenWRT 19.07 branch (and master earlier this year)
- Try rebooting, results in hang.

Old issue, which seems to still persist. See:
http://community.onion.io/topic/1254/omega2-reboot/3 https://patchwork.ozlabs.org/patch/713750/ https://github.com/lede-project/source/pull/620

14.08.20192443PackagesBug ReportVery LowMediumqos-scripts: pktsize field does not take effectTrunkUnconfirmed Task Description

When I modify the “pkgsize” field in /etc/config/qos, the output of

/usr/lib/qos/generate.sh all

does not contain content for matching packet size.
For example,add “option pktsize ‘1024’” in rule “download”.
But the “packetsize” field works.
Device:Phicomm K2P
Version:OpenWrt R9.8.5 / LuCI Master (git-19.146.62144-fd6fdb2)
luci-app-qos git-19.146.62144-fd6fdb2-1
luci-i18n-qos-zh-cn git-19.146.62144-fd6fdb2-1
qos-scripts 1.3.1-1

13.08.20192442Base systemBug ReportVery LowLoweth0 doesn't work on ath79 and AR7240 Rev 2 for ubnt-bu...TrunkUnconfirmed Task Description

Supply the following if possible:
- Device problem occurs on

Ubiquiti Bullet M with AR7240 Rev 2 (AR7241 works fine)

- Software versions of OpenWrt/LEDE release, packages, etc.

first noticed in March 2019, replicated today on reboot-10753-gbcfd1d7685

- Steps to reproduce

Plug an ethernet cable, try to pass traffic, check interface status.

# dmesg | grep eth
[ 1.259129] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:1f:04 [uid=00000000, driver=Generic PHY]
[ 1.269672] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
[ 8.504454] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.608176] br-pub: port 1(eth0) entered blocking state
[ 27.613435] br-pub: port 1(eth0) entered disabled state
[ 27.619234] device eth0 entered promiscuous mode

Works fine on ar71xx. On IRC:

2019-02-24 17:53 gch981213: russell–: ar71xx has the ability to auto-detect many things but ath79 doesn’t. ar7240 and ar7241 can’t share the same dts on arh79 but they can use the same piece of machine code in ar71xx.

How to sensibly support both AR7240 and AR7241 in ath79 considering it is not easy to distinguish them externally?


13.08.20192440Base systemBug ReportVery LowLowRaspberry Pi 3 build does not seem to run in QEMUTrunkUnconfirmed Task Description

I am interested in running a Raspberry Pi 3 OpenWrt image (built from commit 7ec092e6) in QEMU. My aim is to perform some testing of custom-built images before shipment. I am close to accomplishing this, but the kernel panics soon after booting.

I run QEMU With:

qemu-system-aarch64 -kernel build_dir/target-aarch64_cortex-a53_musl/linux-brcm2708_bcm2710/vmlinux -dtb build_dir/target-aarch64_cortex-a53_musl/linux-brcm2708_bcm2710/image-bcm2710-rpi-3-b.dtb -cpu cortex-a53 -m 256 -M raspi3 -append “root=/dev/sda2 rootfstype=ext4 rw” -hda openwrt-brcm2708-bcm2710-rpi-3-ext4-factory.img

The kernel crashes under these circumstances. I attached a screenshot I cobbled together that contains the kernel’s output.

I first mentioned this issue on the openwrt-devel mailing list (June 2, 2019, subject “Running Raspberry Pi 3 OpenWrt in QEMU”), and Petr Štetiar suggested I open a bug report here.


12.08.20192439Base systemBug ReportVery LowLowcomgt hotplug mishandles "bind" eventTrunkUnconfirmed Task Description

My 3g modem goes “unavailable” shortly after being plugged in. Even though the device /dev/ttyUSB* exists, “ifup” has no effect and “ifstatus” shows:

{

      "up": false,
      "pending": false,
      "available": false,
      "autostart": true,
      "dynamic": false,
      "proto": "3g",
      "data": {
      },
      "errors": [
              {
                      "subsystem": "interface",
                      "code": "NO_DEVICE"
              }
      ]

}

I found that this is caused by incorrect logic at https://github.com/openwrt/openwrt/blob/7ec092e64125b920aee6d1767dacea3f61b2fa6f/package/network/utils/comgt/files/3g.usb#L17

Namely, the “add” event is followed by “bind” event, which causes:

proto_set_available “$cfg” 0

And BTW, isn’t there a race condition with hotplug at https://github.com/openwrt/openwrt/blob/7ec092e64125b920aee6d1767dacea3f61b2fa6f/package/network/utils/comgt/files/3g.sh#L38 ?

11.08.20192438OtherFeature RequestVery LowLowMigrate to GitLab or a similar platformTrunkUnconfirmed Task Description

As some other Open Source projects already did, migration to a different service like GitLab might be useful. The benefit is that code and issues (and automated building) can be managed in one place and more easily linked between each other. Also it would make contributions more streamlined and offers a better UI (and UX) for things like the issue tracker.

11.08.20192437Base systemFeature RequestVery LowMediumAdd algorithm for auto channel selection (ACS)TrunkUnconfirmed Task Description

Apparently OpenWrt currently does not offer an algorithm for auto channel selection of a wireless channel. Instead it just always seems to default to channel 1 if autochannel is activated. This is not the intended behaviour and not what a user expects. So I suggest adding some selection algorithm to it (there is already available at least one, so it should not be too hard to add it).

10.08.20192434Base systemBug ReportVery LowLowLinksys EA6350 Wireless crashedTrunkUnconfirmed Task Description

Linksys EA 6350 2.4 wireless crashed


[15:52:54 10/08/2019] ————[ cut here ]———— [15:52:54 10/08/2019] WARNING: CPU: 2 PID: 1927 at backports-5.2-rc7-1/net/wireless/util.c:1171 cfg80211_calculate_bitrate+0x1d8/0x24c [cfg80211]
[15:52:54 10/08/2019] invalid rate bw=0, mcs=15, nss=4
[15:52:54 10/08/2019] Modules linked in: pppoe ppp_async iptable_nat ipt_MASQUERADE ath10k_pci ath10k_core ath xt_state xt_nat xt_conntrack xt_REDIRECT xt_FLOWOFFLOAD xt_CT rndis_host pppox ppp_generic nf_nat_ipv4 nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mac80211 ipt_REJECT cfg80211 cdc_ether xt_time xt_tcpudp xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG wireguard usbnet slhc nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables hwmon crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip6_udp_tunnel udp_tunnel tun mii leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom gpio_button_hotplug
[15:52:54 10/08/2019] CPU: 2 PID: 1927 Comm: hostapd Not tainted 4.19.64 #0
[15:52:55 10/08/2019] Hardware name: Generic DT based system
[15:52:55 10/08/2019] [<c030e2c4>] (unwind_backtrace) from [<c030ad20>] (show_stack+0×10/0×14)
[15:52:55 10/08/2019] [<c030ad20>] (show_stack) from [<c07abc70>] (dump_stack+0×88/0x9c)
[15:52:55 10/08/2019] [<c07abc70>] (dump_stack) from [<c031b898>] (warn+0xd4/0xf0)
[15:52:55 10/08/2019] [<c031b898>] (
warn) from [<c031b8ec>] (warn_slowpath_fmt+0×38/0×48)
[15:52:55 10/08/2019] [<c031b8ec>] (warn_slowpath_fmt) from [<bf19df68>] (cfg80211_calculate_bitrate+0x1d8/0x24c [cfg80211])
[15:52:55 10/08/2019] [<bf19df68>] (cfg80211_calculate_bitrate [cfg80211]) from [<bf1baee4>] (nl80211_put_sta_rate+0×48/0x104c [cfg80211])
[15:52:55 10/08/2019] [<bf1baee4>] (nl80211_put_sta_rate [cfg80211]) from [<bf1bb698>] (nl80211_put_sta_rate+0x7fc/0x104c [cfg80211])
[15:52:55 10/08/2019] [<bf1bb698>] (nl80211_put_sta_rate [cfg80211]) from [<bf1bc254>] (cfg80211_del_sta_sinfo+0×98/0xd8 [cfg80211])
[15:52:55 10/08/2019] [<bf1bc254>] (cfg80211_del_sta_sinfo [cfg80211]) from [<bf1f56e0>] (sta_set_sinfo+0xcb0/0xd0c [mac80211])
[15:52:55 10/08/2019] [<bf1f56e0>] (sta_set_sinfo [mac80211]) from [<bf1f575c>] (sta_info_destroy+0×20/0×28 [mac80211])
[15:52:55 10/08/2019] [<bf1f575c>] (
sta_info_destroy [mac80211]) from [<bf1f57cc>] (sta_info_destroy_addr_bss+0×28/0×40 [mac80211])
[15:52:55 10/08/2019] [<bf1f57cc>] (sta_info_destroy_addr_bss [mac80211]) from [<bf1a887c>] (nl80211_del_station+0xdc/0xec [cfg80211])
[15:52:55 10/08/2019] [<bf1a887c>] (nl80211_del_station [cfg80211]) from [<c06d2698>] (genl_rcv_msg+0x32c/0x3d0)
[15:52:55 10/08/2019] [<c06d2698>] (genl_rcv_msg) from [<c06d09d8>] (netlink_rcv_skb+0×98/0×108)
[15:52:55 10/08/2019] [<c06d09d8>] (netlink_rcv_skb) from [<c06d1044>] (genl_rcv+0×24/0×34)
[15:52:55 10/08/2019] [<c06d1044>] (genl_rcv) from [<c06d0278>] (netlink_unicast+0x15c/0×200)
[15:52:55 10/08/2019] [<c06d0278>] (netlink_unicast) from [<c06d065c>] (netlink_sendmsg+0×340/0×388)
[15:52:55 10/08/2019] [<c06d065c>] (netlink_sendmsg) from [<c06717d8>] (_sys_sendmsg+0×220/0×254)
[15:52:55 10/08/2019] [<c06717d8>] (
_sys_sendmsg) from [<c067260c>] (sys_sendmsg+0×40/0×64)
[15:52:55 10/08/2019] [<c067260c>] (
sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0×0/0×54)
[15:52:55 10/08/2019] Exception stack(0xcd1c5fa8 to 0xcd1c5ff0)
[15:52:55 10/08/2019] 5fa0: 00000000 00000000 00000005 bec40920 00000000 00000000
[15:52:55 10/08/2019] 5fc0: 00000000 00000000 b6fcaba0 00000128 b6fcdad0 00000001 00000000 00000004
[15:52:55 10/08/2019] 5fe0: bec408c8 bec408b4 b6fa181c b6fa0cec
[15:52:55 10/08/2019] —[ end trace 58a5c1dd202fe432 ]—


09.08.20192433Base systemBug ReportVery LowLowdnsmasq exit by receive SIGTERM on boot stageTrunkUnconfirmed Task Description

- Device problem occurs on

 I'm use **MT7688 SOC(ramips)**,and use newest snapshot image **widora_neo-16m-squashfs-sysupgrade.bin**.

- Software versions of OpenWrt/LEDE release, packages, etc.

 use the newest snapshot image,and download on https://downloads.openwrt.org/snapshots/targets/ramips/mt76x8/.

- Steps to reproduce

 
 In boot stage dnsmasq will exit by receive SIGTERM, and then dnsmasq will restart. 
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[746]: exiting on receipt of SIGTERM
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: started, version 2.80 cachesize 150
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: DNS service limited to local subnets
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq-dhcp[1129]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain test
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain onion
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain localhost
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain local
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain invalid
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain bind
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: using local addresses only for domain lan
Thu Aug  8 19:34:58 2019 daemon.warn dnsmasq[1129]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: read /etc/hosts - 4 addresses
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq-dhcp[1129]: read /etc/ethers - 0 addresses
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: read /etc/hosts - 4 addresses
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq[1129]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Aug  8 19:34:58 2019 daemon.info dnsmasq-dhcp[1129]: read /etc/ethers - 0 addresses

08.08.20192431KernelBug ReportVery LowLowar71xx, Archer C7 V2 5GHz, wmi command timeout, ath10k_...TrunkUnconfirmed Task Description

Unfortunately this just spontaneously happened overnight, so I can’t reproduce it. dmesg had a call trace available, and phy0 was able to restart automatically.

Device is a TP-Link Archer C7 V2
Firmware version is OpenWrt 19.07-SNAPSHOT r10194+92-c53f62b111 / LuCI openwrt-19.07 branch (git-19.211.64983-dd908ce)
Kernel is 4.14.134

Package list:

ath10k-firmware-qca988x-ct - 2018-10-10-d366b80d-1
base-files - 198-r10194+92-c53f62b111
busybox - 1.30.1-5
conntrack - 2018-05-01-88610abe-1
dmesg - 2.33-2
dnsmasq-full - 2.80-13
dropbear - 2019.78-2
ethtool - 5.1-1
firewall - 2019-01-02-70f8785b-2
fstools - 2019-03-28-ff1ded63-5
fwtool - 1
getrandom - 2019-04-07-5130fa4d-2
grep - 3.3-1
hostapd-common - 2018-12-02-c2c6c01b-6
hwclock - 2.33-2
iftop - 2017-03-22-949ed0f7-1
ip6tables - 1.8.3-2
ipset - 7.1-3
iptables - 1.8.3-2
iptables-mod-conntrack-extra - 1.8.3-2
iptables-mod-ipopt - 1.8.3-2
iputils-ping - 20101006-1
iputils-tracepath - 20101006-1
iw - 5.0.1-1
iwinfo - 2019-06-12-1372f47e-1
jshn - 2019-02-27-eeef7b50-1
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 4.14.134-1-b137a7e93235587b021963e3049a01f6
kmod-ath - 4.14.134+4.19.32-1-2
kmod-ath10k-ct - 4.14.134+2019-05-08-f98b6dc4-1
kmod-ath9k - 4.14.134+4.19.32-1-2
kmod-ath9k-common - 4.14.134+4.19.32-1-2
kmod-cfg80211 - 4.14.134+4.19.32-1-2
kmod-gpio-button-hotplug - 4.14.134-2
kmod-hwmon-core - 4.14.134-1
kmod-ifb - 4.14.134-1
kmod-ip6tables - 4.14.134-1
kmod-ipt-conntrack - 4.14.134-1
kmod-ipt-conntrack-extra - 4.14.134-1
kmod-ipt-core - 4.14.134-1
kmod-ipt-ipopt - 4.14.134-1
kmod-ipt-ipset - 4.14.134-1
kmod-ipt-nat - 4.14.134-1
kmod-ipt-offload - 4.14.134-1
kmod-ipt-raw - 4.14.134-1
kmod-lib-crc-ccitt - 4.14.134-1
kmod-mac80211 - 4.14.134+4.19.32-1-2
kmod-nf-conntrack - 4.14.134-1
kmod-nf-conntrack-netlink - 4.14.134-1
kmod-nf-conntrack6 - 4.14.134-1
kmod-nf-flow - 4.14.134-1
kmod-nf-ipt - 4.14.134-1
kmod-nf-ipt6 - 4.14.134-1
kmod-nf-nat - 4.14.134-1
kmod-nf-reject - 4.14.134-1
kmod-nf-reject6 - 4.14.134-1
kmod-nfnetlink - 4.14.134-1
kmod-nls-base - 4.14.134-1
kmod-ppp - 4.14.134-1
kmod-pppoe - 4.14.134-1
kmod-pppox - 4.14.134-1
kmod-sched-cake - 4.14.134+2019-03-12-057c7388-1
kmod-sched-connmark - 4.14.134-1
kmod-sched-core - 4.14.134-1
kmod-sched-ctinfo - 4.14.134-1
kmod-sched-ipset - 4.14.134-1
kmod-slhc - 4.14.134-1
kmod-usb-core - 4.14.134-1
kmod-usb-ehci - 4.14.134-1
kmod-usb-ledtrig-usbport - 4.14.134-1
kmod-usb2 - 4.14.134-1
libblobmsg-json - 2019-02-27-eeef7b50-1
libc - 1.1.23-1
libelf1 - 0.176-2
libgcc1 - 7.4.0-1
libip4tc2 - 1.8.3-2
libip6tc2 - 1.8.3-2
libipset13 - 7.1-3
libiwinfo-lua - 2019-06-12-1372f47e-1
libiwinfo20181126 - 2019-06-12-1372f47e-1
libjson-c2 - 0.12.1-3
libjson-script - 2019-02-27-eeef7b50-1
liblua5.1.5 - 5.1.5-3
liblucihttp-lua - 2019-07-05-a34a17d5-1
liblucihttp0 - 2019-07-05-a34a17d5-1
libmnl0 - 1.0.4-2
libncurses6 - 6.1-4
libnetfilter-conntrack3 - 2018-05-01-3ccae9f5-2
libnetfilter-cthelper0 - 1.0.0-2
libnetfilter-cttimeout1 - 1.0.0-2
libnetfilter-queue1 - 2017-06-27-601abd1c-2
libnfnetlink0 - 1.0.1-2
libnl-tiny - 0.1-5
libopenssl1.1 - 1.1.1c-1
libpcap1 - 1.9.0-2
libpcre - 8.43-1
libpthread - 1.1.23-1
librt - 1.1.23-1
libubox20170601 - 2019-02-27-eeef7b50-1
libubus-lua - 2018-10-06-221ce7e7-1
libubus20170705 - 2018-10-06-221ce7e7-1
libuci20130104 - 2019-05-17-f199b961-3
libuclient20160123 - 2019-05-30-3b3e368d-1
libuuid1 - 2.33-2
libxtables12 - 1.8.3-2
logd - 2019-04-07-5130fa4d-2
lua - 5.1.5-3
luci - git-19.211.64983-dd908ce-1
luci-app-firewall - git-19.211.64983-dd908ce-1
luci-app-opkg - git-19.211.64983-dd908ce-1
luci-app-sqm - 1.3.0-1
luci-app-upnp - git-19.211.64983-dd908ce-1
luci-base - git-19.211.64983-dd908ce-1
luci-lib-ip - git-19.211.64983-dd908ce-1
luci-lib-jsonc - git-19.211.64983-dd908ce-1
luci-lib-nixio - git-19.211.64983-dd908ce-1
luci-mod-admin-full - git-19.211.64983-dd908ce-1
luci-mod-network - git-19.211.64983-dd908ce-1
luci-mod-status - git-19.211.64983-dd908ce-1
luci-mod-system - git-19.211.64983-dd908ce-1
luci-proto-ipv6 - git-19.211.64983-dd908ce-1
luci-proto-ppp - git-19.211.64983-dd908ce-1
luci-theme-bootstrap - git-19.211.64983-dd908ce-1
miniupnpd - 2.1.20190408-2
mtd - 24
netifd - 2019-06-08-8c6358b5-2
netperf - 2.7.0-1
odhcp6c - 2019-01-11-d2e247d8-16
odhcpd-ipv6only - 2019-05-17-41a74cba-3
openssh-sftp-server - 8.0p1-1
openwrt-keyring - 2019-07-25-8080ef34-1
opkg - 2019-06-14-dcbc142e-1
ppp - 2.4.7.git-2019-05-25-2
ppp-mod-pppoe - 2.4.7.git-2019-05-25-2
procd - 2019-05-30-ade00ca5-1
rpcd - 2019-06-05-89bfaa42-2
rpcd-mod-rrdns - 20170710
speedtest-netperf - 1.0.0-1
sqm-scripts - 1.3.0-1
swconfig - 12
tc - 5.0.0-2
tcpdump - 4.9.2-1
terminfo - 6.1-4
uboot-envtools - 2018.03-3
ubox - 2019-04-07-5130fa4d-2
ubus - 2018-10-06-221ce7e7-1
ubusd - 2018-10-06-221ce7e7-1
uci - 2019-05-17-f199b961-3
uclibcxx - 0.2.5-1
uclient-fetch - 2019-05-30-3b3e368d-1
uhttpd - 2018-11-28-cdfc902a-3
urandom-seed - 1.0-1
urngd - 2019-06-17-c057e177-1
usign - 2015-07-04-ef641914-1
wireless-regdb - 2017-10-20-4343d359
wpad-basic - 2018-12-02-c2c6c01b-6
zlib - 1.2.11-3

dmesg:

[    0.000000] Linux version 4.14.134 (mfogtman@Lotus) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10194+92-c53f62b111)) #0 Wed Jul 31 15:03:08 2019
[    0.000000] MyLoader: sysp=3dafa4b5, boardp=bf20a5e5, parts=e7a7afeb
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 805043b0, node_mem_map 81000020
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] random: get_random_bytes called from start_kernel+0x90/0x478 with crng_init=0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=ARCHER-C7-V2  console=ttyS0,115200 rootfstype=squashfs noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 124236K/131072K available (3690K kernel code, 182K rwdata, 884K rodata, 292K init, 204K bss, 6836K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
[    0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
[    0.008287] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[    0.074984] pid_max: default: 32768 minimum: 301
[    0.080070] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.087106] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.096360] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.106853] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.113719] NET: Registered protocol family 16
[    0.119553] MIPS: machine is TP-LINK Archer C7
[    0.127364] ar724x-pci ar724x-pci.0: PCIe link is down
[    0.132865] registering PCI controller with io_map_base unset
[    0.139111] registering PCI controller with io_map_base unset
[    0.637765] PCI host bridge to bus 0000:00
[    0.642130] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
[    0.649476] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.655403] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.662629] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.671064] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.671171] PCI host bridge to bus 0000:01
[    0.675543] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
[    0.682853] pci_bus 0000:01: root bus resource [io  0x0001]
[    0.688785] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
[    0.696000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[    0.704454] pci 0000:01:00.0: [168c:003c] type 00 class 0x028000
[    0.704509] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.704563] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.704636] pci 0000:01:00.0: supports D1 D2
[    0.704803] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.704824] pci 0000:01:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    0.712617] pci 0000:01:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
[    0.720835] clocksource: Switched to clocksource MIPS
[    0.727022] NET: Registered protocol family 2
[    0.732333] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.739755] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.746556] TCP: Hash tables configured (established 1024 bind 1024)
[    0.753432] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.759656] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.766543] NET: Registered protocol family 1
[    0.771236] PCI: CLS 0 bytes, default 32
[    0.775155] Crashlog allocated RAM at address 0x3f00000
[    0.781766] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.792635] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.798837] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.816435] io scheduler noop registered
[    0.820602] io scheduler deadline registered (default)
[    0.826326] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.833428] console [ttyS0] disabled
[    0.857294] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[    0.866479] console [ttyS0] enabled
[    0.873896] bootconsole [early0] disabled
[    0.885535] m25p80 spi0.0: found w25q128, expected m25p80
[    0.901931] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.907160] 5 tp-link partitions found on MTD device spi0.0
[    0.912839] Creating 5 MTD partitions on "spi0.0":
[    0.917702] 0x000000000000-0x000000020000 : "u-boot"
[    0.924034] 0x000000020000-0x0000001a694c : "kernel"
[    0.930154] 0x0000001a694c-0x000000ff0000 : "rootfs"
[    0.935845] mtd: device 2 (rootfs) set to be root filesystem
[    0.941656] 1 squashfs-split partitions found on MTD device rootfs
[    0.947931] 0x000000630000-0x000000ff0000 : "rootfs_data"
[    0.955373] 0x000000ff0000-0x000001000000 : "art"
[    0.961238] 0x000000020000-0x000000ff0000 : "firmware"
[    0.968798] libphy: Fixed MDIO Bus: probed
[    0.986427] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
[    1.681669] libphy: ag71xx_mdio: probed
[    2.312357] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[    2.323602] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    2.600832] random: fast init done
[    2.952370] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII
[    2.960211] NET: Registered protocol family 10
[    2.968367] Segment Routing with IPv6
[    2.972208] NET: Registered protocol family 17
[    2.977155] 8021q: 802.1Q VLAN Support v1.8
[    2.988365] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.996610] Freeing unused kernel memory: 292K
[    3.001145] This architecture does not have kernel memory protection.
[    3.756289] init: Console is alive
[    3.759905] init: - watchdog -
[    5.225745] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.289042] usbcore: registered new interface driver usbfs
[    5.294727] usbcore: registered new interface driver hub
[    5.300184] usbcore: registered new device driver usb
[    5.309816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.317857] ehci-platform: EHCI generic platform driver
[    5.323267] ehci-platform ehci-platform.0: EHCI Host Controller
[    5.329301] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[    5.339579] ehci-platform ehci-platform.0: TX-TX IDP fix enabled
[    5.345699] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
[    5.380869] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[    5.388075] hub 1-0:1.0: USB hub found
[    5.392183] hub 1-0:1.0: 1 port detected
[    5.396543] ehci-platform ehci-platform.1: EHCI Host Controller
[    5.402620] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
[    5.412928] ehci-platform ehci-platform.1: TX-TX IDP fix enabled
[    5.419032] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
[    5.450909] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
[    5.458101] hub 2-0:1.0: USB hub found
[    5.462223] hub 2-0:1.0: 1 port detected
[    5.467150] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.484869] init: - preinit -
[    6.891880] eth1: link up (1000Mbps/Full duplex)
[    6.915674] random: procd: uninitialized urandom read (4 bytes read)
[    9.242302] jffs2: notice: (440) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (2 unchecked, 1 orphan) and 12 of xref (1 dead, 1 orphan) found.
[    9.260428] mount_root: switching to jffs2 overlay
[    9.306417] overlayfs: upper fs does not support tmpfile.
[    9.318717] urandom-seed: Seeding with /etc/urandom.seed
[    9.416285] eth1: link down
[    9.428697] procd: - early -
[    9.432257] procd: - watchdog -
[   10.032365] procd: - watchdog -
[   10.035793] procd: - ubus -
[   10.160485] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.193407] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.200229] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.207552] procd: - init -
[   11.030187] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.109118] urngd: v1.0.0 started.
[   11.185750] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.206443] Netfilter messages via NETLINK v0.30.
[   11.222597] ip_set: protocol 6
[   11.281917] Mirror/redirect action on
[   11.304319] u32 classifier
[   11.307070]     input device check on
[   11.310782]     Actions configured
[   11.349644] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[   11.442880] Loading modules backported from Linux version v4.19.32-0-g3a2156c839c7
[   11.450563] Backport generated by backports.git v4.19.32-1-0-g1c4f7569
[   11.483422] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.507077] ctnetlink v0.93: registering with nfnetlink.
[   11.518048] random: crng init done
[   11.521545] random: 6 urandom warning(s) missed due to ratelimiting
[   11.685368] xt_time: kernel timezone is -0000
[   11.915657] PPP generic driver version 2.4.2
[   11.922264] NET: Registered protocol family 24
[   11.952186] pci 0000:01:00.0: using irq 41 for pin 1
[   11.957229] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x3c.
[   11.966264] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[   11.972201] ath10k_pci 0000:01:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[   12.244445] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:01:00.0.txt failed with error -2
[   12.255156] ath10k_pci 0000:01:00.0: Falling back to user helper
[   12.328946] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
[   12.338164] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[   12.349044] ath10k_pci 0000:01:00.0: Falling back to user helper
[   12.490153] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
[   12.500731] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-5.bin failed with error -2
[   12.511885] ath10k_pci 0000:01:00.0: Falling back to user helper
[   12.653080] firmware ath10k!QCA988X!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[   12.662734] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-2.bin failed with error -2
[   12.673878] ath10k_pci 0000:01:00.0: Falling back to user helper
[   12.815861] firmware ath10k!QCA988X!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[   12.825476] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[   12.836358] ath10k_pci 0000:01:00.0: Falling back to user helper
[   12.978197] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[   12.987552] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
[   12.998429] ath10k_pci 0000:01:00.0: Falling back to user helper
[   13.139375] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
[   13.148751] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
[   13.159637] ath10k_pci 0000:01:00.0: Falling back to user helper
[   13.301818] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
[   13.311203] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
[   13.322086] ath10k_pci 0000:01:00.0: Falling back to user helper
[   13.463667] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
[   13.476561] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[   13.485963] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   13.498365] ath10k_pci 0000:01:00.0: firmware ver 10.1-ct-8x-__fW-022-fddd041b api 2 features wmi-10.x,has-wmi-mgmt-tx,adaptive-cca,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 01d1f13e
[   13.612812] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[   13.623438] ath10k_pci 0000:01:00.0: Falling back to user helper
[   13.697313] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[   13.729918] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[   14.666913] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[   14.684321] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
[   14.690608] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
[   14.698749] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24648 iram: 26168'
[   14.766661] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[   14.779442] ath10k_pci 0000:01:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
[   14.914013] ath: EEPROM regdomain: 0x0
[   14.914020] ath: EEPROM indicates default country code should be used
[   14.914023] ath: doing EEPROM country->regdmn map search
[   14.914034] ath: country maps to regdmn code: 0x3a
[   14.914039] ath: Country alpha2 being used: US
[   14.914042] ath: Regpair used: 0x3a
[   14.979019] ath: EEPROM regdomain: 0x0
[   14.979025] ath: EEPROM indicates default country code should be used
[   14.979028] ath: doing EEPROM country->regdmn map search
[   14.979041] ath: country maps to regdmn code: 0x3a
[   14.979046] ath: Country alpha2 being used: US
[   14.979049] ath: Regpair used: 0x3a
[   14.996867] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   14.998485] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
[   15.067318] kmodloader: done loading kernel modules from /etc/modules.d/*
[   26.443821] eth1: link up (1000Mbps/Full duplex)
[   26.448585] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   26.490603] br-lan: port 1(eth1.1) entered blocking state
[   26.496128] br-lan: port 1(eth1.1) entered disabled state
[   26.501868] device eth1.1 entered promiscuous mode
[   26.506730] device eth1 entered promiscuous mode
[   26.581505] br-lan: port 1(eth1.1) entered blocking state
[   26.586992] br-lan: port 1(eth1.1) entered forwarding state
[   26.592810] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   26.629195] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.681789] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   27.480915] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   27.487814] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   27.887178] eth0: link up (1000Mbps/Full duplex)
[   27.914387] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   27.987169] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   31.651455] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   31.820062] br-lan: port 2(wlan1) entered blocking state
[   31.825506] br-lan: port 2(wlan1) entered disabled state
[   31.831174] device wlan1 entered promiscuous mode
[   31.836042] br-lan: port 2(wlan1) entered blocking state
[   31.841471] br-lan: port 2(wlan1) entered forwarding state
[   31.930982] br-lan: port 2(wlan1) entered disabled state
[   34.188629] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[   34.206072] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
[   34.212426] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
[   34.220552] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24648 iram: 26168'
[   34.288838] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
[   34.304306] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   34.346489] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   34.353126] br-lan: port 2(wlan1) entered blocking state
[   34.358517] br-lan: port 2(wlan1) entered forwarding state
[   34.399154] br-lan: port 3(wlan0) entered blocking state
[   34.404594] br-lan: port 3(wlan0) entered disabled state
[   34.410253] device wlan0 entered promiscuous mode
[   95.572860] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   95.579713] br-lan: port 3(wlan0) entered blocking state
[   95.585168] br-lan: port 3(wlan0) entered forwarding state
[67616.023825] device br-lan entered promiscuous mode
[67617.724357] device br-lan left promiscuous mode
[67768.357193] device br-lan entered promiscuous mode
[67768.368081] device br-lan left promiscuous mode
[67942.801840] device br-lan entered promiscuous mode
[67942.813220] device br-lan left promiscuous mode
[68011.047700] device br-lan entered promiscuous mode
[68011.059460] device br-lan left promiscuous mode
[68047.133819] device br-lan entered promiscuous mode
[68109.545749] device br-lan left promiscuous mode
[68171.518281] device br-lan entered promiscuous mode
[68171.530078] device br-lan left promiscuous mode
[68243.026147] device br-lan entered promiscuous mode
[68243.037171] device br-lan left promiscuous mode
[68264.801627] device br-lan entered promiscuous mode
[68480.100656] device br-lan left promiscuous mode
[69862.315880] device br-lan entered promiscuous mode
[69943.999704] device br-lan left promiscuous mode
[70058.964893] device br-lan entered promiscuous mode
[72815.961338] device br-lan left promiscuous mode
[73954.834674] device br-lan entered promiscuous mode
[73954.848295] device br-lan left promiscuous mode
[73989.921066] device br-lan entered promiscuous mode
[73989.938130] device br-lan left promiscuous mode
[74030.863353] device br-lan entered promiscuous mode
[74032.819953] device br-lan left promiscuous mode
[74042.491869] device br-lan entered promiscuous mode
[74043.823203] device br-lan left promiscuous mode
[74074.398650] device br-lan entered promiscuous mode
[75923.519544] device br-lan left promiscuous mode
[79922.715944] device br-lan entered promiscuous mode
[81405.765323] device br-lan left promiscuous mode
[82864.190075] device br-lan entered promiscuous mode
[87683.516136] device br-lan left promiscuous mode
[90714.435509] device br-lan entered promiscuous mode
[94642.461296] device br-lan left promiscuous mode
[94687.318577] device br-lan entered promiscuous mode
[94781.642718] device br-lan left promiscuous mode
[94913.533912] device br-lan entered promiscuous mode
[106071.431181] device eth0.2 entered promiscuous mode
[106071.436540] device eth0 entered promiscuous mode
[106211.460505] device br-lan left promiscuous mode
[106211.469716] device eth0.2 left promiscuous mode
[106211.474939] device eth0 left promiscuous mode
[106238.112404] device eth0.2 entered promiscuous mode
[106238.117410] device eth0 entered promiscuous mode
[106251.739873] device eth0.2 left promiscuous mode
[106251.745130] device eth0 left promiscuous mode
[106257.489077] device br-lan entered promiscuous mode
[106260.371948] device br-lan left promiscuous mode
[106308.352598] device eth0 entered promiscuous mode
[106338.332431] device eth0 left promiscuous mode
[106382.953284] device br-lan entered promiscuous mode
[106407.894849] device br-lan left promiscuous mode
[109510.843928] device br-lan entered promiscuous mode
[114356.161499] device br-lan left promiscuous mode
[146409.574813] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146409.677217] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146409.779617] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146409.882012] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146409.984415] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.086810] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.189222] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.291624] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.394027] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.496435] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.598832] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.701235] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.803640] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146410.906041] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.008449] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.110842] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.213243] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.315643] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.418043] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.520451] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.622850] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.725260] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.827653] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146411.930057] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.032461] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.134861] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.237262] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.339663] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.442064] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.449784] ath10k_pci 0000:01:00.0: wmi command 36893 timeout, restarting hardware
[146412.457773] ath10k_pci 0000:01:00.0: failed to delete peer 94:bf:2d:69:13:ab for vdev 0: -11
[146412.466992] ath10k_pci 0000:01:00.0: found sta peer 94:bf:2d:69:13:ab (ptr 85617c00 id 369) entry on vdev 0 after it was supposedly removed
[146412.480284] ------------[ cut here ]------------
[146412.485364] WARNING: CPU: 0 PID: 3115 at backports-4.19.32-1/net/mac80211/sta_info.c:1004 sta_set_sinfo+0xbac/0xc58 [mac80211]
[146412.497271] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat sch_cake em_ipset act_ctinfo act_connmark
[146412.569739] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.577766]  nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[146412.638033] CPU: 0 PID: 3115 Comm: hostapd Not tainted 4.14.134 #0
[146412.644432] Stack : 80500000 804b86ec 00000000 00000000 8049384c 861cdafc 87c9e3dc 804df967
[146412.653068] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.661285]         8048f97c 00000c2b 80553800 000003ec 861cdcac 00000001 861cdab0 82f4d555
[146412.669906]         00000000 00000000 80550000 00007bc0 00000000 00000000 00000007 00000000
[146412.678873]         00000166 902aee62 00000165 6d3a2068 80000000 00000000 87764d14 87707c28
[146412.687681]         00000009 000003ec 861cdcac 874b4800 00000010 80259584 00000000 80550000
[146412.696403]         ...
[146412.699004] Call Trace:
[146412.701879] [<8006c50c>] show_stack+0x58/0x100
[146412.706549] [<80086be0>] __warn+0xe4/0x118
[146412.710797] [<80086ca4>] warn_slowpath_null+0x1c/0x28
[146412.716320] [<87707c28>] sta_set_sinfo+0xbac/0xc58 [mac80211]
[146412.722313] [<87707db4>] sta_info_destroy_addr_bss+0x38/0x60 [mac80211]
[146412.729551] [<8768f1ec>] cfg80211_check_station_change+0x1be0/0x2c54 [cfg80211]
[146412.737603] ---[ end trace a6aa529dc19f5da5 ]---
[146412.749280] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.851674] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146412.954077] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.056479] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.158882] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.261277] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.363680] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.466089] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.568484] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.670888] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.773280] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.875685] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146413.978088] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.080494] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.182889] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.285290] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.387700] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.490099] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.592487] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.694903] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.797303] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146414.899704] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.002104] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.104510] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.206913] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.309321] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.411715] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.514118] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.616520] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.718899] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.804277] ath10k_pci 0000:01:00.0: wmi command 36954 timeout, restarting hardware
[146415.821319] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.923720] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[146415.991376] ath10k_pci 0000:01:00.0: removing peer, cleanup-all, deleting: peer 84a0c600 vdev: 0 addr: 44:07:0b:71:a8:d7 
[146416.002637] ath10k_pci 0000:01:00.0: removing peer, cleanup-all, deleting: peer 84a0cc00 vdev: 0 addr: 54:60:09:43:06:fa 
[146416.013855] ath10k_pci 0000:01:00.0: removing peer, cleanup-all, deleting: peer 86cbf400 vdev: 0 addr: ac:37:43:a6:36:5b 
[146416.025067] ath10k_pci 0000:01:00.0: removing peer, cleanup-all, deleting: peer 87320800 vdev: 0 addr: 18:d6:c7:86:31:5b 
[146416.443806] irq 41: nobody cared (try booting with the "irqpoll" option)
[146416.450705] CPU: 0 PID: 14287 Comm: kworker/u2:1 Tainted: G        W       4.14.134 #0
[146416.458887] Workqueue: ath10k_wq ath10k_core_create [ath10k_core]
[146416.465151] Stack : c0000000 00000003 80553c60 800b4784 8049384c 00000000 00000001 85b78914
[146416.473721]         8048f8e8 87c07ce4 804e0000 800b55e4 80553c60 00000000 87c07cc0 002adb44
[146416.482293]         00000000 00000000 00000000 00009448 00000000 00000000 00000007 00000000
[146416.490864]         0000019d 804f0000 0000019c 20617468 00000000 804f35a0 00000029 ffffffff
[146416.499435]         c0000000 00000003 80553c60 804eda38 00000008 80259584 00000000 80550000
[146416.508006]         ...
[146416.510577] Call Trace:
[146416.513147] [<8006c50c>] show_stack+0x58/0x100
[146416.517755] [<800b8eac>] __report_bad_irq.isra.0+0x54/0xf0
[146416.523404] [<800b9234>] note_interrupt+0x284/0x330
[146416.528438] [<800b67c8>] handle_irq_event_percpu+0x4c/0x64
[146416.534088] [<800b681c>] handle_irq_event+0x3c/0x70
[146416.539122] [<800b9c08>] handle_level_irq+0x11c/0x160
[146416.544330] [<800b5ca0>] generic_handle_irq+0x38/0x50
[146416.549540] [<800b5ca0>] generic_handle_irq+0x38/0x50
[146416.554749] [<800b5ca0>] generic_handle_irq+0x38/0x50
[146416.559974] [<803f9554>] do_IRQ+0x1c/0x2c
[146416.564142] [<8021d770>] plat_irq_dispatch+0xc0/0x120
[146416.569359] [<800673f8>] handle_int+0x138/0x144
[146416.574041] [<8021d770>] plat_irq_dispatch+0xc0/0x120
[146416.579247] handlers:
[146416.581650] [<876134a0>] ath10k_pci_irq_msi_fw_mask [ath10k_pci]
[146416.587824] Disabling IRQ #41
[146416.719014] ieee80211 phy0: Hardware restart was requested
[146419.804223] ath10k_pci 0000:01:00.0: bss channel survey timed out
[146421.204308] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[146421.314256] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
[146421.320460] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
[146421.328691] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24648 iram: 26168'
[146422.304272] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
[146422.744302] ath10k_pci 0000:01:00.0: set-coverage-class, phyclk: 88  value: 0
[146428.684343] ath10k_pci 0000:01:00.0: device successfully recovered
[162100.948919] device br-lan entered promiscuous mode
[166914.012501] device br-lan left promiscuous mode
[193083.423124] device br-lan entered promiscuous mode
[200663.861196] device br-lan left promiscuous mode
[283600.278061] device br-lan entered promiscuous mode
[288463.225795] device br-lan left promiscuous mode

I don’t know if it is relevant, but the only thing different from normal is I had tcpdump sending data to Wireshark overnight (a single host on port 53, so it wasn’t terribly busy).

05.08.20192428Base systemBug ReportVery LowCriticalath79: sysupgrade will brick devices with RedBoot bootl...TrunkUnconfirmed Task Description

The current code responsible for upgrading devices with sysupgrade image, doesn’t take in to the account that “FIS” partition and “RedBoot config” partition can be on the same erase block. This can cause erasing the “RedBoot config” partition and make the device inoperable. The recovery would involve external SPI programmer or usage of JTAG.

The cause is still assumption so it will need confirmation. Flashing devices with factory image should be safe.

- Device problem occurs on:

   Ubiquiti RouterStation and RouterStation Pro
   jjPlus JA76PF2
   Adtran BSAP1880, BSAP1800 V2 and BSAP1840

- Software versions of OpenWrt release, packages, etc.:

   master and possibly 19.07

- Steps to reproduce

   syupgrade the device
01.08.20192422KernelBug ReportVery LowMediumWithout reason my router dropping frames.openwrt-18.06Unconfirmed Task Description

Without reason my ping sometimes going up very fast.
I checked logs, and there was around 53 lines of “Error - Dropping frame due to full tx queue 2”.
It’s the reason of instability of my network.

Supply the following if possible:
- DWR 921 C3
- Powered by LuCI openwrt-18.06 branch (git-19.170.32094-4d6d8bc) / OpenWrt 18.06.4 r7808-ef686b7292

 


01.08.20192421Base systemBug ReportVery LowLowspidev_test fails to build under SDKTrunkUnconfirmed Task Description

Using July 31, 2019 snapshot SDK (and quite few before that, just got around to reporting) spidev_test fails to build under the ath79 SDK (which causes the entire build to fail). Log message is:

cp: cannot stat ‘/home/daniel/Build/openwrt-sdk-ath79-generic_gcc-7.4.0_musl.Linux-x86_64/build_dir/target-mips_24kc_musl/linux-ath79_generic/linux-4.19.62/tools/spi/*’: No such file or directory
make[3]: *** [Makefile:64: /home/daniel/Build/openwrt-sdk-ath79-generic_gcc-7.4.0_musl.Linux-x86_64/build_dir/target-mips_24kc_musl/linux-ath79_generic/linux-4.19.62/tools/spi-target-mips_24kc_musl/.prepared_de019ecc69c7e706dce2af75912fda36_6664517399ebbbc92a37c5bb081b5c53] Error 1
time: package/feeds/base/spidev_test/compile#0.20#0.05#0.50

base feed is standard, openwrt-packages has modes to p910nd and saned-backends, otherwise current master, all other feeds standard.

 


01.08.20192420Base systemBug ReportVery LowMediumNo more masquerading after "ifdown wan; ifup wan"openwrt-18.06Unconfirmed Task Description

hw: TP-Link TL-WDR3600 v1
arch: Atheros AR9344 rev 2
sw: OpenWrt 18.06.4 r7808-ef686b7292 / LuCI openwrt-18.06 branch (git-19.170.32094-4d6d8bc)

Network:
lan
pppoe-wan ipv4 plus dhcpv6 client

Issue:
After “ifdown wan; ifup wan” there is no more masquerading done to outgoing packets. Source address of those packets from lan to pppoe-wan are unchanged.

Solution (works for me):
In /etc/hotplug.d/iface/20-firewall change the last line
fw3 -q reload
to
fw3 -q restart

01.08.20192419Base systemBug ReportVery LowCriticaloverlay reporting wrong sizeTrunkWaiting on reporter Task Description
DEVICE: APU2 X86_64 SNAPSHOT
FIRMWARE USED: http://downloads.openwrt.org/snapshots/targets/x86/64/openwrt-x86-64-combined-squashfs.img.gz
FIRMWARE SHA256: cf0824377d5a8d9832f5e6f60c78f9ae2f6841d4b9cd3c57f9cfdf72e4f47e81
FIRMWARE DATE: Wed Jul 31 18:02:58 2019
FIRMWARE SIZE: 7146.8 KB

BusyBox v1.31.0 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r10641-1d2b2e744e
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:/# df -hT
Filesystem           Type            Size      Used Available Use% Mounted on
/dev/root            squashfs        2.5M      2.5M         0 100% /rom
tmpfs                tmpfs           1.9G     72.0K      1.9G   0% /tmp
/dev/loop0           f2fs          123.5M     65.6M     57.9M  53% /overlay
overlayfs:/overlay   overlay       123.5M     65.6M     57.9M  53% /
/dev/mmcblk0p1       ext4           15.7M      4.3M     11.1M  28% /boot
/dev/mmcblk0p1       ext4           15.7M      4.3M     11.1M  28% /boot
tmpfs                tmpfs         512.0K         0    512.0K   0% /dev
root@OpenWrt:/# find /overlay
/overlay
/overlay/upper
/overlay/upper/boot
/overlay/upper/etc
/overlay/upper/etc/board.json
/overlay/upper/etc/config
/overlay/upper/etc/config/network
/overlay/upper/etc/config/system
/overlay/upper/etc/config/dhcp
/overlay/upper/etc/config/dropbear
/overlay/upper/etc/config/firewall
/overlay/upper/etc/uci-defaults
/overlay/upper/etc/uci-defaults/10_migrate-shadow
/overlay/upper/etc/uci-defaults/12_network-generate-ula
/overlay/upper/etc/uci-defaults/13_fix_group_user
/overlay/upper/etc/uci-defaults/20_migrate-feeds
/overlay/upper/etc/uci-defaults/odhcpd.defaults
/overlay/upper/etc/dropbear
/overlay/upper/etc/dropbear/dropbear_rsa_host_key
/overlay/upper/etc/urandom.seed
/overlay/work
/overlay/work/work
/overlay/.fs_state
root@OpenWrt:/#

31.07.20192418Base systemBuild FailureVery LowVery LowBuild failure - Netgear 6220 (mt7621)TrunkUnconfirmed Task Description


30.07.20192415PackagesBug ReportVery LowLowNginx or Openssl cannot use http2 on x86_64 platformsTrunkUnconfirmed Task Description

Select compile platform for x86_64,
enable nginx http2 option, start compiling, then enable http2 parameters via conf file, you will find that the website cannot be opened.
Only enable http1 and tls 1.3, no problem.

There is no such problem in the bcm53xx platform test.

Trunk kernel version 4.19.57
openssl version 1.1.1c
nginx version 1.16.0

27.07.20192411Base systemBug ReportVery LowHighChanges to configuration are not saved between reboots ...openwrt-18.06Waiting on reporter Task Description

I recently updated my D-Link DIR-600 to OpenWrt 18.06.4. As I recall, the previous running version was from the 17.* branch line which worked like a charm. Since the update to 18, the configuration is no longer saved when altered (through LuCI). I suspect the flash size may be too small for this device.

kern.err kernel: [   44.315763] jffs2: Too few erase blocks (4)

System log as follows:

Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.000000] Linux version 4.14.131 (buildbot@dbab1e23488d) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7808-ef686b7292)) #0 Thu Jun 27 12:18:52 2019
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] SoC Type: Ralink RT3350 id:1 rev:2
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] MIPS: machine is D-Link DIR-600 B1
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] Determined physical RAM map:
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000]  memory: 02000000 @ 00000000 (usable)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Jun 27 12:19:01 2019 kern.warn kernel: [    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
Thu Jun 27 12:19:01 2019 kern.warn kernel: [    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] Zone ranges:
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] Movable zone start for each node
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] Early memory node ranges
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
Thu Jun 27 12:19:01 2019 kern.debug kernel: [    0.000000] On node 0 totalpages: 8192
Thu Jun 27 12:19:01 2019 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 803f74b0, node_mem_map 81000040
Thu Jun 27 12:19:01 2019 kern.debug kernel: [    0.000000]   Normal zone: 64 pages used for memmap
Thu Jun 27 12:19:01 2019 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Jun 27 12:19:01 2019 kern.debug kernel: [    0.000000]   Normal zone: 8192 pages, LIFO batch:0
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0x803fa730 with crng_init=0
Thu Jun 27 12:19:01 2019 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Jun 27 12:19:01 2019 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8128
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] Writing ErrCtl register=0003fbe0
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] Readback ErrCtl register=0003fbe0
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] Memory: 27968K/32768K available (3463K kernel code, 172K rwdata, 428K rodata, 152K init, 202K bss, 4800K reserved, 0K cma-reserved)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] NR_IRQS: 256
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] CPU Clock: 320MHz
Thu Jun 27 12:19:01 2019 kern.crit kernel: [    0.000000] timer_probe: no matching timers found
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945377789 ns
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.000027] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421772796ns
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.015794] Calibrating delay loop... 212.58 BogoMIPS (lpj=1062912)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.108400] pid_max: default: 32768 minimum: 301
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.118144] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.131389] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.158707] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.178376] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.190778] pinctrl core: initialized pinctrl subsystem
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.204961] NET: Registered protocol family 16
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.288107] rt2880_gpio 10000600.gpio: registering 24 gpios
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.299345] rt2880_gpio 10000600.gpio: registering 24 irq handlers
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.325968] clocksource: Switched to clocksource MIPS
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.339590] NET: Registered protocol family 2
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.350800] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.364807] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.377536] TCP: Hash tables configured (established 1024 bind 1024)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.390676] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.402450] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.415694] NET: Registered protocol family 1
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.434160] rt-timer 10000100.timer: maximum frequency is 3255Hz
Thu Jun 27 12:19:01 2019 kern.warn kernel: [    0.448814] Crashlog allocated RAM at address 0x1f00000
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.465905] workingset: timestamp_bits=30 max_order=13 bucket_order=0
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.495414] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.507095] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.568216] io scheduler noop registered
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.575915] io scheduler deadline registered (default)
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.587719] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.609517] console [ttyS0] disabled
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.616788] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 6666666) is a Palmchip BK-3103
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.636648] console [ttyS0] enabled
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.650659] bootconsole [early0] disabled
Thu Jun 27 12:19:01 2019 kern.err kernel: [    0.667925] cacheinfo: Failed to find cpu0 device node
Thu Jun 27 12:19:01 2019 kern.warn kernel: [    0.678472] cacheinfo: Unable to detect cache hierarchy for CPU 0
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.692613] 1f000000.cfi: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Thu Jun 27 12:19:01 2019 kern.debug kernel: [    0.713003] 1f000000.cfi: Found an alias at 0x400000 for the chip at 0x0
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.713044] Amd/Fujitsu Extended Query Table at 0x0040
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.723567]   Amd/Fujitsu Extended Query version 1.3.
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.733912] number of CFI chips: 1
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.763510] 4 fixed-partitions partitions found on MTD device 1f000000.cfi
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.777571] Creating 4 MTD partitions on "1f000000.cfi":
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.788486] 0x000000000000-0x000000030000 : "u-boot"
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.801096] 0x000000030000-0x000000040000 : "devdata"
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.813979] 0x000000040000-0x000000050000 : "devconf"
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.827051] 0x000000050000-0x000000400000 : "firmware"
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.852725] 2 uimage-fw partitions found on MTD device firmware
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.864919] 0x000000050000-0x0000001a19cd : "kernel"
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.877670] 0x0000001a19cd-0x000000400000 : "rootfs"
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.890239] mtd: device 5 (rootfs) set to be root filesystem
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.901904] 1 squashfs-split partitions found on MTD device rootfs
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    0.914588] 0x0000003c0000-0x000000400000 : "rootfs_data"
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.929929] libphy: Fixed MDIO Bus: probed
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.941883] rt3050-esw 10110000.esw: link changed 0x00
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.968999] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
Thu Jun 27 12:19:01 2019 kern.info kernel: [    0.987304] rt2880_wdt 10000120.watchdog: Initialized
Thu Jun 27 12:19:01 2019 kern.info kernel: [    1.001118] NET: Registered protocol family 10
Thu Jun 27 12:19:01 2019 kern.info kernel: [    1.023475] Segment Routing with IPv6
Thu Jun 27 12:19:01 2019 kern.info kernel: [    1.031295] NET: Registered protocol family 17
Thu Jun 27 12:19:01 2019 kern.info kernel: [    1.040591] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Jun 27 12:19:01 2019 kern.info kernel: [    1.066901] 8021q: 802.1Q VLAN Support v1.8
Thu Jun 27 12:19:01 2019 kern.info kernel: [    1.090328] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Thu Jun 27 12:19:01 2019 kern.info kernel: [    1.107082] Freeing unused kernel memory: 152K
Thu Jun 27 12:19:01 2019 kern.warn kernel: [    1.116215] This architecture does not have kernel memory protection.
Thu Jun 27 12:19:01 2019 user.info kernel: [    2.121392] init: Console is alive
Thu Jun 27 12:19:01 2019 user.info kernel: [    2.129218] init: - watchdog -
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    2.586054] random: fast init done
Thu Jun 27 12:19:01 2019 kern.info kernel: [    2.672827] rt3050-esw 10110000.esw: link changed 0x08
Thu Jun 27 12:19:01 2019 user.info kernel: [    3.310116] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Jun 27 12:19:01 2019 user.info kernel: [    3.473617] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Jun 27 12:19:01 2019 user.info kernel: [    3.499523] init: - preinit -
Thu Jun 27 12:19:01 2019 kern.info kernel: [    4.744023] 8021q: adding VLAN 0 to HW filter on device eth0
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    4.807593] random: procd: uninitialized urandom read (4 bytes read)
Thu Jun 27 12:19:01 2019 user.notice kernel: [    8.389257] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
Thu Jun 27 12:19:01 2019 user.warn kernel: [    8.461892] urandom-seed: Seed file not found (/etc/urandom.seed)
Thu Jun 27 12:19:01 2019 user.info kernel: [    8.691867] procd: - early -
Thu Jun 27 12:19:01 2019 user.info kernel: [    8.698345] procd: - watchdog -
Thu Jun 27 12:19:01 2019 user.info kernel: [    9.542956] procd: - watchdog -
Thu Jun 27 12:19:01 2019 user.info kernel: [    9.550705] procd: - ubus -
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    9.718507] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    9.863957] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Jun 27 12:19:01 2019 kern.notice kernel: [    9.878290] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Jun 27 12:19:01 2019 user.info kernel: [    9.896376] procd: - init -
Thu Jun 27 12:19:01 2019 user.info kernel: [   10.626635] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Jun 27 12:19:01 2019 kern.info kernel: [   10.654495] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Jun 27 12:19:01 2019 kern.info kernel: [   10.696121] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Thu Jun 27 12:19:01 2019 kern.info kernel: [   10.712420] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Thu Jun 27 12:19:01 2019 kern.info kernel: [   10.736149] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Jun 27 12:19:01 2019 kern.info kernel: [   10.767787] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Thu Jun 27 12:19:01 2019 kern.info kernel: [   10.925396] xt_time: kernel timezone is -0000
Thu Jun 27 12:19:01 2019 kern.info kernel: [   11.050512] PPP generic driver version 2.4.2
Thu Jun 27 12:19:01 2019 kern.info kernel: [   11.066924] NET: Registered protocol family 24
Thu Jun 27 12:19:01 2019 kern.info kernel: [   11.128843] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "devdata"
Thu Jun 27 12:19:01 2019 kern.info kernel: [   11.143671] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0200 detected
Thu Jun 27 12:19:01 2019 kern.info kernel: [   11.159505] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
Thu Jun 27 12:19:01 2019 kern.debug kernel: [   11.175056] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Jun 27 12:19:01 2019 user.info kernel: [   11.349828] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Jun 27 12:19:01 2019 kern.warn kernel: [   13.056965] urandom_read: 5 callbacks suppressed
Thu Jun 27 12:19:01 2019 kern.notice kernel: [   13.056986] random: jshn: uninitialized urandom read (4 bytes read)
Thu Jun 27 12:19:03 2019 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Jun 27 12:19:03 2019 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Jun 27 12:19:04 2019 daemon.info dnsmasq[801]: started, version 2.80 cachesize 150
Thu Jun 27 12:19:04 2019 daemon.info dnsmasq[801]: DNS service limited to local subnets
Thu Jun 27 12:19:04 2019 daemon.info dnsmasq[801]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Jun 27 12:19:04 2019 daemon.info dnsmasq[801]: using local addresses only for domain test
Thu Jun 27 12:19:04 2019 daemon.info dnsmasq[801]: using local addresses only for domain onion
Thu Jun 27 12:19:04 2019 daemon.info dnsmasq[801]: using local addresses only for domain localhost
Thu Jun 27 12:19:04 2019 daemon.info dnsmasq[801]: using local addresses only for domain local
Thu Jun 27 12:19:04 2019 daemon.info dnsmasq[801]: using local addresses only for domain invalid
Thu Jun 27 12:19:04 2019 daemon.info dnsmasq[801]: using local addresses only for domain bind
Thu Jun 27 12:19:04 2019 daemon.info dnsmasq[801]: using local addresses only for domain lan
Thu Jun 27 12:19:04 2019 daemon.warn dnsmasq[801]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Jun 27 12:19:04 2019 daemon.info dnsmasq[801]: read /etc/hosts - 4 addresses
Thu Jun 27 12:19:04 2019 daemon.info dnsmasq[801]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Jun 27 12:19:10 2019 user.notice : Added device handler type: tunnel
Thu Jun 27 12:19:10 2019 user.notice : Added device handler type: Network device
Thu Jun 27 12:19:10 2019 user.notice : Added device handler type: bridge
Thu Jun 27 12:19:10 2019 user.notice : Added device handler type: veth
Thu Jun 27 12:19:10 2019 user.notice : Added device handler type: macvlan
Thu Jun 27 12:19:10 2019 user.notice : Added device handler type: 8021ad
Thu Jun 27 12:19:10 2019 user.notice : Added device handler type: 8021q
Thu Jun 27 12:19:11 2019 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Thu Jun 27 12:19:11 2019 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Thu Jun 27 12:19:18 2019 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Thu Jun 27 12:19:18 2019 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Thu Jun 27 12:19:18 2019 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Thu Jun 27 12:19:19 2019 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Thu Jun 27 12:19:19 2019 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Thu Jun 27 12:19:19 2019 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Thu Jun 27 12:19:20 2019 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Thu Jun 27 12:19:22 2019 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Thu Jun 27 12:19:22 2019 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Thu Jun 27 12:19:23 2019 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Thu Jun 27 12:19:23 2019 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Thu Jun 27 12:19:25 2019 kern.err kernel: [   44.315763] jffs2: Too few erase blocks (4)
Thu Jun 27 12:19:25 2019 daemon.err mount_root: failed - mount -t jffs2 /dev/mtdblock6 /rom/overlay: Invalid argument
Thu Jun 27 12:19:27 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN LED (amber)
Thu Jun 27 12:19:28 2019 kern.info kernel: [   46.657999] 8021q: adding VLAN 0 to HW filter on device eth0
Thu Jun 27 12:19:28 2019 kern.info kernel: [   46.761430] br-lan: port 1(eth0.1) entered blocking state
Thu Jun 27 12:19:28 2019 kern.info kernel: [   46.772519] br-lan: port 1(eth0.1) entered disabled state
Thu Jun 27 12:19:28 2019 kern.info kernel: [   46.784464] device eth0.1 entered promiscuous mode
Thu Jun 27 12:19:28 2019 kern.info kernel: [   46.794338] device eth0 entered promiscuous mode
Thu Jun 27 12:19:28 2019 kern.info kernel: [   46.991682] br-lan: port 1(eth0.1) entered blocking state
Thu Jun 27 12:19:28 2019 kern.info kernel: [   47.002761] br-lan: port 1(eth0.1) entered forwarding state
Thu Jun 27 12:19:28 2019 kern.info kernel: [   47.014766] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Jun 27 12:19:28 2019 daemon.notice netifd: Interface 'lan' is enabled
Thu Jun 27 12:19:28 2019 daemon.notice netifd: Interface 'lan' is setting up now
Thu Jun 27 12:19:28 2019 daemon.notice netifd: Interface 'lan' is now up
Thu Jun 27 12:19:28 2019 daemon.notice netifd: Interface 'loopback' is enabled
Thu Jun 27 12:19:28 2019 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Jun 27 12:19:28 2019 daemon.notice netifd: Interface 'loopback' is now up
Thu Jun 27 12:19:28 2019 daemon.notice netifd: Interface 'wan' is enabled
Thu Jun 27 12:19:28 2019 daemon.notice netifd: Interface 'wan6' is enabled
Thu Jun 27 12:19:28 2019 daemon.notice netifd: bridge 'br-lan' link is up
Thu Jun 27 12:19:28 2019 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Jun 27 12:19:28 2019 daemon.notice netifd: Network device 'eth0' link is up
Thu Jun 27 12:19:28 2019 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Jun 27 12:19:29 2019 daemon.notice netifd: Network device 'lo' link is up
Thu Jun 27 12:19:29 2019 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Jun 27 12:19:29 2019 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Jun 27 12:19:29 2019 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Jun 27 12:19:29 2019 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jun 27 12:19:29 2019 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Jun 27 12:19:29 2019 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Jun 27 12:19:29 2019 kern.info kernel: [   47.656594] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Jun 27 12:19:30 2019 daemon.notice netifd: wan (1178): udhcpc: started, v1.28.4
Thu Jun 27 12:19:31 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Jun 27 12:19:32 2019 daemon.notice netifd: wan (1178): udhcpc: sending discover
Thu Jun 27 12:19:34 2019 daemon.info procd: - init complete -
Thu Jun 27 12:19:35 2019 daemon.notice netifd: wan (1178): udhcpc: sending discover
Thu Jun 27 12:19:38 2019 daemon.notice netifd: wan (1178): udhcpc: sending discover
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[801]: exiting on receipt of SIGTERM
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: started, version 2.80 cachesize 150
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: DNS service limited to local subnets
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq-dhcp[1322]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: using local addresses only for domain test
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: using local addresses only for domain onion
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: using local addresses only for domain localhost
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: using local addresses only for domain local
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: using local addresses only for domain invalid
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: using local addresses only for domain bind
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: using local addresses only for domain lan
Thu Jun 27 12:19:40 2019 daemon.warn dnsmasq[1322]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: read /etc/hosts - 4 addresses
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq-dhcp[1322]: read /etc/ethers - 0 addresses
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: read /etc/hosts - 4 addresses
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq[1322]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Thu Jun 27 12:19:40 2019 daemon.info dnsmasq-dhcp[1322]: read /etc/ethers - 0 addresses
Thu Jun 27 12:19:47 2019 daemon.info dnsmasq-dhcp[1322]: DHCPDISCOVER(br-lan) 00:0e:c6:8e:2b:c9
Thu Jun 27 12:19:47 2019 daemon.info dnsmasq-dhcp[1322]: DHCPOFFER(br-lan) 192.168.1.122 00:0e:c6:8e:2b:c9
Thu Jun 27 12:19:48 2019 daemon.info dnsmasq-dhcp[1322]: DHCPREQUEST(br-lan) 192.168.1.122 00:0e:c6:8e:2b:c9
Thu Jun 27 12:19:48 2019 daemon.info dnsmasq-dhcp[1322]: DHCPACK(br-lan) 192.168.1.122 00:0e:c6:8e:2b:c9 badapple
Thu Jun 27 12:20:09 2019 daemon.err uhttpd[958]: luci: accepted login on /admin for root from 192.168.1.122
Thu Jun 27 12:20:34 2019 kern.notice kernel: [  112.796216] random: crng init done
Thu Jun 27 12:20:34 2019 daemon.info urandom_seed[1268]: Seed saved (/etc/urandom.seed)
Thu Jun 27 12:20:56 2019 auth.err passwd: password for root changed by root
Thu Jun 27 12:21:36 2019 auth.err passwd: password for root changed by root
26.07.20192410Base systemBug ReportVery LowLowTD-W8980: Kernel panic - not syncing: Fatal exception i...TrunkUnconfirmed Task Description

A few times to day the ADSL2+ connection is unable to reconnect because something in the driver seems unable to work again, I have an older router (cisco) and it reconnects whitout any trouble.

Restarting the interface with the br2684ctl init script causes a kernel panic.

DEVICE="TP-Link TD-W8980"   
VERSION="18.06.4"
BUILD_ID="r7808-ef686b7292"
LEDE_BOARD="lantiq/xrx200"
LEDE_ARCH="mips_24kc"
Fri Jul 26 19:53:54 2019 daemon.notice pppd[32180]: pppd 2.4.7 started by root, uid 0
Fri Jul 26 19:53:54 2019 daemon.debug pppd[32180]: Send PPPOE Discovery V1T1 PADI session 0x0 length 4
Fri Jul 26 19:53:54 2019 daemon.debug pppd[32180]:  dst ff:ff:ff:ff:ff:ff  src 30:b5:c2:9d:c4:7e
Fri Jul 26 19:53:54 2019 daemon.debug pppd[32180]:  [service-name]
Fri Jul 26 19:53:59 2019 daemon.debug pppd[32180]: Send PPPOE Discovery V1T1 PADI session 0x0 length 4
Fri Jul 26 19:53:59 2019 daemon.debug pppd[32180]:  dst ff:ff:ff:ff:ff:ff  src 30:b5:c2:9d:c4:7e
Fri Jul 26 19:53:59 2019 daemon.debug pppd[32180]:  [service-name]
Fri Jul 26 19:54:04 2019 daemon.debug pppd[32180]: Send PPPOE Discovery V1T1 PADI session 0x0 length 4
Fri Jul 26 19:54:04 2019 daemon.debug pppd[32180]:  dst ff:ff:ff:ff:ff:ff  src 30:b5:c2:9d:c4:7e
Fri Jul 26 19:54:04 2019 daemon.debug pppd[32180]:  [service-name]
Fri Jul 26 19:54:09 2019 daemon.warn pppd[32180]: Timeout waiting for PADO packets
Fri Jul 26 19:54:09 2019 daemon.err pppd[32180]: Unable to complete PPPoE Discovery
Fri Jul 26 19:54:09 2019 daemon.info pppd[32180]: Exit.
root@OpenWrt:~# /etc/init.d/br2684ctl
[...]
[  888.844371] CPU 0 Unable to h
andle kernel paging request at virtual address 0000000c, epc == 82cce5b0, ra == 819e07a0
[  888.853829] Oops[#1]:
[  888.856086] CPU: 0 PID: 3338 Comm: sh Not tainted 4.9.184 #0
[  888.861738] task: 83a88bc0 task.stack: 81534000
[  888.866255] $ 0   : 00000000 7f8bfef0 80a08b40 82cce5a0
[  888.871476] $ 4   : 8271dc00 80a08b40 0000f6be 00000001
[  888.876697] $ 8   : 83806000 00001ff0 8003256c 7f8bfe64
[  888.881920] $12   : 7f8c0058 00000000 00000000 774b42c0
[  888.887145] $16   : 00000000 00000001 819e6b88 00000000
[  888.892365] $20   : 00000001 819e6b9c 0000000f 819e0000
[  888.897587] $24   : 0045bbe4 00000000                  
[  888.902809] $28   : 81534000 83807eb0 00000001 819e07a0
[  888.908034] Hi    : 00000018
[  888.910903] Lo    : 00000002
[  888.913857] epc   : 82cce5b0 0x82cce5b0 [br2684@82cce000+0x19f0]
[  888.919803] ra    : 819e07a0 0x819e07a0 [ltq_atm_vr9@819e0000+0x6e00]
[  888.926227] Status: 1100ff02 KERNEL EXL 
[  888.930145] Cause : 00800008 (ExcCode 02)
[  888.934147] BadVA : 0000000c
[  888.937023] PrId  : 00019556 (MIPS 34Kc)
[  888.940933] Modules linked in: ltq_atm_vr9 ath9k ath9k_common ath9k_hw ath pppoe nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY pppox ppp_async owl_loader nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink ltq_deu_vr9 iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat fuse sch_cake act_connmark nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress drv_dsl_cpe_api ledtrig_usbport drv_mei_cpe xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables nfsv4 nfsv3 pppoatm ppp_generic slhc
 nfsd nfs ifb rpcsec_gss_krb5 auth_rpcgss oid_registry tun lockd sunrpc grace autofs4 dns_resolver br2684 atm exportfs drv_ifxos sha1_generic md5 hmac ecb des_generic cts cbc usb_storage uhci_hcd ohci_platform ohci_hcd sd_mod scsi_mod ext4 jbd2 mbcache crc32c_generic dwc2 gpio_button_hotplug
Process sh (pid: 3338, threadinfo=81534000, task=83a88bc0, tls=774b5dc0)
[  889.090467] Stack : 00000000 805288a0 00000000 80075714 00000011 819e07a0 8383a354 8108fb80
[  889.098820]         8383a354 00000000 00020000 819e1d30 8052f3f8 00000000 00000001 00407b39
[  889.107178]         80524d40 800738a4 805331c0 00000000 819e39d4 819e39d0 8052f3f8 8052f0a0
[  889.115532]         8057b200 00010000 00000002 00000000 00000100 80033600 774aa000 00000000
[  889.123888]         00000000 800739d8 81468000 00000007 80524058 00000040 806841e0 00000006
[  889.132244]         ...
[  889.134680] Call Trace:[  889.136961] [<80075714>] 0x80075714
[  889.140450] [<819e07a0>] 0x819e07a0 [ltq_atm_vr9@819e0000+0x6e00]
[  889.146612] [<819e1d30>] 0x819e1d30 [ltq_atm_vr9@819e0000+0x6e00]
[  889.152627] [<800738a4>] 0x800738a4
[  889.156111] [<80033600>] 0x80033600
[  889.159589] [<800739d8>] 0x800739d8
[  889.163072] [<80032b74>] 0x80032b74
[  889.166553] [<80032f54>] 0x80032f54
[  889.170034] [<80072d8c>] 0x80072d8c
[  889.173515] [<8000307c>] 0x8000307c
[  889.176996] [<8000c4ec>] 0x8000c4ec
[  889.180479] [<8000a9e8>] 0x8000a9e8
[  889.183950] 
[  889.185425] Code: afbf0014  afb00010  8c9002f8 <8e02000c> 0040f809  00000000  3c028053  8c42f0ac  7c420400 
[  889.195176] 
[  889.196816] ---[ end trace 8e8def78ee4b4969 ]---
[  889.207641] Kernel panic - not syncing: Fatal exception in interrupt
[  889.217636] Rebooting in 3 seconds..
ATU-C Vendor ID:                          FF,B5,47,53,50,4E,00,10
ATU-C System Vendor ID:                   00,00,30,30,30,30,00,00
Chipset:                                  Lantiq-VRX200
Firmware Version:                         5.8.0.11.1.1
API Version:                              4.17.18.6
XTSE Capabilities:                        0x0, 0x0, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0
Annex:                                    A
Line Mode:                                G.992.5 (ADSL2+)
Profile:                                  
Line State:                               UP [0x801: showtime_tc_sync]
Forward Error Correction Seconds (FECS):  Near: 0 / Far: 0
Errored seconds (ES):                     Near: 2 / Far: 0
Severely Errored Seconds (SES):           Near: 0 / Far: 0
Loss of Signal Seconds (LOSS):            Near: 0 / Far: 0
Unavailable Seconds (UAS):                Near: 34 / Far: 34
Header Error Code Errors (HEC):           Near: 0 / Far: 0
Non Pre-emtive CRC errors (CRC_P):        Near: 0 / Far: 0
Pre-emtive CRC errors (CRCP_P):           Near: 0 / Far: 0
Power Management Mode:                    L0 - Synchronized
Latency [Interleave Delay]:               0.25 ms [Fast]   0.25 ms [Fast]
Data Rate:                                Down: 12.287 Mb/s / Up: 1.023 Mb/s
Line Attenuation (LATN):                  Down: 18.4 dB / Up: 7.3 dB
Signal Attenuation (SATN):                Down: 16.8 dB / Up: 0.0 dB
Noise Margin (SNR):                       Down: 19.1 dB / Up: 10.3 dB
Aggregate Transmit Power (ACTATP):        Down: 18.4 dB / Up: 10.4 dB
Max. Attainable Data Rate (ATTNDR):       Down: 20.132 Mb/s / Up: 1.056 Mb/s
Line Uptime Seconds:                      1273
Line Uptime:                              21m 13s
25.07.20192407Base systemBug ReportVery LowLowwdr3600 5ghz wireless keeps cutting outTrunkUnconfirmed Task Description

Supply the following if possible:

- Device problem occurs on
TL WDR3600 v1

- Software versions of OpenWrt/LEDE release, packages, etc.
Powered by LuCI Master (git-19.204.23774-bd44189) / OpenWrt SNAPSHOT r10574-273b803623 (also tried with 18.06.01 & 02 & 04)
Atheros AR9580

- Steps to reproduce

 

Set up Wireless 5g to Canada, N mode, auto channel, auto power, 20 Mhz width.

wireless wlan1 will not associate.

root@OpenWrt:~# iwinfo wlan1 info
wlan1 ESSID: “Wrigley5”

        Access Point: E8:DE:27:FF:9F:99
        Mode: Master  Channel: 149 (5.745 GHz)
        Tx-Power: 19 dBm  Link Quality: unknown/70
        Signal: unknown  Noise: -95 dBm
        Bit Rate: unknown
        Encryption: WPA2 PSK (CCMP)
        Type: nl80211  HW Mode(s): 802.11an
        Hardware: 168C:0033 168C:A120 [Atheros AR9580]
        TX power offset: none
        Frequency offset: none
        Supports VAPs: yes  PHY name: phy1
25.07.20192406Base systemBug ReportVery LowMediumUnreliable wifi with android phonesopenwrt-18.06Unconfirmed Task Description

I have two WRT1200AC devices set up. One is the router, and the second one is a 2.4Ghz access point that uses 5Ghz WDS for the back-haul. The problem seems unrelated to WDS, although both routers are configured with multiple wifi interfaces on each radio. I see the problem occur on both devices, so it’s probably not bad hardware. I’ve been battling this problem on all recent releases. Last night I tried 18.06.4, and the problem still exists.

I have multiple LG G6 smartphones running android 8.0.0. The problem is that, although they seemingly maintain a solid wifi connection to my openwrt access points, network connections don’t work most of the time (web pages don’t load, messages don’t come in, etc.) Laptops seem to work just fine over wifi. The internet connection itself is perfectly stable, and devices wired to either device work just fine.

The phones seem to work ok on wifi immediately after resetting the access point. After a few minutes, though, the problem crops up and persists no matter what I try, until I reset the access point. Once the problem manifests, luci rarely loads on the phone’s web browser, so it’s clearly not a WAN issue.

When the problem kicks in, in the device’s system log, I can see “IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)” a few seconds after a phone connects to the access point.

As another data point, I was experimenting with 802.11r. I installed the full wpad package and enabled fast transition. Just like above, Wifi would work for a few minutes. Once the problem kicked in though, rather than the phone claiming to be connected but not work, the phone would instead report an authentication failure and then prompt for the wpa password again. The problem occurs with wpad-mini just as much, it’s just interesting that the symptoms change with 802.11r enabled.

I lack specific knowledge about openwrt development, but I’m an embedded software engineer and I’m happy to collect any debug traces that would be helpful. Just give me the commands or point me at the right documentation...

25.07.20192404PackagesBug ReportVery LowMediummac80211 causing process to be tainted with CF-E375AC A...openwrt-18.06Unconfirmed Task Description

Supply the following if possible:
- Device problem occurs on ar71xx device CF-E375AC running custom build openwrt release 18.06-4
- Steps to reproduce: boot the ap

 

When booting the freshly installed firmware for the device points a kernel trace for mac80211 and after a few days devices presents other processes being tainted. Sometimes the AP enters a bootloop.

wireless config

config wifi-device 'radio0'
	option type 'mac80211'
	option channel '149'
	option hwmode '11a'
	option path 'pci0000:00/0000:00:00.0'
	option country 'BR'
	option noscan '1'
	option htmode 'VHT20'
	option txpower '21'
	option legacy_rates '0'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option mode 'ap'
	option encryption 'none'
	option ssid '_FREE - Boulevard Londrina'
	option network 'MGT'

config wifi-device 'radio1'
	option type 'mac80211'
	option channel '11'
	option hwmode '11g'
	option path 'platform/qca956x_wmac'
	option htmode 'HT20'
	option country 'BR'
	option noscan '1'
	option txpower '20'
	option legacy_rates '0'

config wifi-iface 'default_radio1'
	option device 'radio1'
	option mode 'ap'
	option encryption 'none'
	option ssid '_FREE - Boulevard Londrina'
	option network 'MGT'

config wifi-iface 'monitor'
	option mode 'monitor'
	option ifname 'wlan1'
	option device 'radio1'

dmesg

dmesg

Starting kernel ...

[    0.000000] Linux version 4.9.184 (joao@joao-Elcomasv-01) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7808-ef686b7292) ) #0 Thu Jun 27 12:18:52 2019
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=CF-E375AC mtdparts=spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro console=ttyS0,115200 rootfstype=squasd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 125204K/131072K available (2969K kernel code, 166K rwdata, 688K rodata, 264K init, 202K bss, 5868K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
[    0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
[    0.008213] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.071024] pid_max: default: 32768 minimum: 301
[    0.075975] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.082947] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092686] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.103093] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.110007] NET: Registered protocol family 16
[    0.115951] MIPS: machine is Vagalume Bolt VB-2x2ACW2c
[    0.355073] registering PCI controller with io_map_base unset
[    0.372363] PCI host bridge to bus 0000:00
[    0.376735] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[    0.383972] pci_bus 0000:00: root bus resource [io  0x0001]
[    0.389848] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.396994] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.405717] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    0.413440] pci 0000:00:00.0: using irq 40 for pin 1
[    0.419261] clocksource: Switched to clocksource MIPS
[    0.425467] NET: Registered protocol family 2
[    0.430794] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.438144] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.444888] TCP: Hash tables configured (established 1024 bind 1024)
[    0.451676] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.457840] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.464673] NET: Registered protocol family 1
[    0.473479] Crashlog allocated RAM at address 0x3f00000
[    0.480033] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.492302] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.498444] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.516852] io scheduler noop registered
[    0.521023] io scheduler deadline registered (default)
[    0.526761] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.533822] console [ttyS0] disabled
[    0.557661] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[    0.566760] console [ttyS0] enabled
[    0.566760] console [ttyS0] enabled
[    0.574311] bootconsole [early0] disabled
[    0.574311] bootconsole [early0] disabled
[    0.586037] m25p80 spi0.0: found w25q128, expected m25p80
[    0.602431] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.607315] 4 cmdlinepart partitions found on MTD device spi0.0
[    0.613443] Creating 4 MTD partitions on "spi0.0":
[    0.618393] 0x000000000000-0x000000040000 : "u-boot"
[    0.625174] 0x000000040000-0x000000050000 : "art"
[    0.631774] 0x000000050000-0x000000ff0000 : "firmware"
[    0.664207] 2 uimage-fw partitions found on MTD device firmware
[    0.670357] 0x000000050000-0x000000190000 : "kernel"
[    0.676639] 0x000000190000-0x000000ff0000 : "rootfs"
[    0.683215] mtd: device 4 (rootfs) set to be root filesystem
[    0.689095] 1 squashfs-split partitions found on MTD device rootfs
[    0.695523] 0x000000780000-0x000000ff0000 : "rootfs_data"
[    0.702897] 0x000000ff0000-0x000001000000 : "art-backup"
[    0.710979] libphy: Fixed MDIO Bus: probed
[    0.726468] switch0: Atheros AR8337 rev. 2 switch registered on ag71xx-mdio.0
[    1.412424] libphy: ag71xx_mdio: probed
[    2.040719] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
[    2.052293] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:SGMII
[    2.059534] NET: Registered protocol family 17
[    2.064275] 8021q: 802.1Q VLAN Support v1.8
[    2.076210] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    2.084960] Freeing unused kernel memory: 264K
[    2.089572] This architecture does not have kernel memory protection.
[    2.569272] random: fast init done
[    2.760552] init: Console is alive
[    2.764248] init: - watchdog -
[    3.977559] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.108734] usbcore: registered new interface driver usbfs
[    4.114527] usbcore: registered new interface driver hub
[    4.120102] usbcore: registered new device driver usb
[    4.129935] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.138061] ehci-platform: EHCI generic platform driver
[    4.143580] ehci-platform ehci-platform.0: EHCI Host Controller
[    4.149748] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[    4.160192] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
[    4.189296] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[    4.196670] hub 1-0:1.0: USB hub found
[    4.200906] hub 1-0:1.0: 1 port detected
[    4.205265] ehci-platform ehci-platform.1: EHCI Host Controller
[    4.211453] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
[    4.221929] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
[    4.249282] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
[    4.256657] hub 2-0:1.0: USB hub found
[    4.260906] hub 2-0:1.0: 1 port detected
[    4.265722] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.283589] init: - preinit -
[    4.902115] random: procd: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    5.950668] eth0: link up (1000Mbps/Full duplex)
[    7.134519] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
[    7.142015] jffs2_build_filesystem(): unlocking the mtd device... [    7.148247] done.
[    7.150250] jffs2_build_filesystem(): erasing all blocks after the end marker... [   40.101846] done.
[   40.103865] jffs2: notice: (379) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan.
[   40.121131] mount_root: overlay filesystem has not been fully initialized yet
[   40.144134] mount_root: switching to jffs2 overlay
- config restore -
[   40.891517] urandom-seed: Seed file not found (/etc/urandom.seed)
[   41.055180] eth0: link down
[   41.067481] procd: - early -
[   41.071131] procd: - watchdog -
[   41.675949] procd: - watchdog -
[   41.679461] procd: - ubus -
[   41.836269] random: ubusd: uninitialized urandom read (4 bytes read)
[   41.843476] random: ubusd: uninitialized urandom read (4 bytes read)
[   41.850479] random: ubusd: uninitialized urandom read (4 bytes read)
[   41.857766] procd: - init -
Please press Enter to activate this console.
[   42.242647] kmodloader: loading kernel modules from /etc/modules.d/*
[   42.253640] mpls_gso: MPLS GSO support
[   42.259786] tun: Universal TUN/TAP device driver, 1.6
[   42.265003] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   42.344745] gre: GRE over IPv4 demultiplexor driver
[   42.351617] ip_gre: GRE over IPv4 tunneling driver
[   42.365385] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   42.389574] u32 classifier
[   42.392378]     input device check on
[   42.396157]     Actions configured
[   42.402000] Mirror/redirect action on
[   42.411848] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[   42.435201] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   42.443511] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   42.698554] xt_time: kernel timezone is -0000
[   42.749861] ip_tables: (C) 2000-2006 Netfilter Core Team
[   42.874032] PPP generic driver version 2.4.2
[   42.880654] NET: Registered protocol family 24
[   42.912501] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   42.918648] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[   43.134524] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[   43.145628] ath10k_pci 0000:00:00.0: Falling back to user helper
[   84.055863] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9888/hw2.0/firmware-6.bin failed with error -2
[   84.066949] ath10k_pci 0000:00:00.0: Falling back to user helper
[   84.170018] firmware ath10k!QCA9888!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[   84.913900] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
[   84.923457] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[   84.943976] ath10k_pci 0000:00:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 a9603656
[   85.261989] ath10k_pci 0000:00:00.0: board_file api 2 bmi_id 0:16 crc32 d65c17b1
[   87.464734] ath10k_pci 0000:00:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[   87.713530] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=47
[   87.726840] kmodloader: done loading kernel modules from /etc/modules.d/*
[   88.378445] urandom_read: 5 callbacks suppressed
[   88.378452] random: jshn: uninitialized urandom read (4 bytes read)
[   98.603267] br-MGT: port 1(eth0.2) entered blocking state
[   98.608854] br-MGT: port 1(eth0.2) entered disabled state
[   98.614759] device eth0.2 entered promiscuous mode
[   98.619749] device eth0 entered promiscuous mode
[   99.630857] eth0: link up (1000Mbps/Full duplex)
[   99.635911] br-MGT: port 1(eth0.2) entered blocking state
[   99.641529] br-MGT: port 1(eth0.2) entered forwarding state
[  100.263145] ath: EEPROM regdomain: 0x804c
[  100.267293] ath: EEPROM indicates we should expect a country code
[  100.273629] ath: doing EEPROM country->regdmn map search
[  100.279110] ath: country maps to regdmn code: 0x3b
[  100.284066] ath: Country alpha2 being used: BR
[  100.288651] ath: Regpair used: 0x3b
[  100.292254] ath: regdomain 0x804c dynamically updated by user
[  100.298263] ath: EEPROM regdomain: 0x804c
[  100.302410] ath: EEPROM indicates we should expect a country code
[  100.308695] ath: doing EEPROM country->regdmn map search
[  100.314179] ath: country maps to regdmn code: 0x3b
[  100.319115] ath: Country alpha2 being used: BR
[  100.323702] ath: Regpair used: 0x3b
[  100.327297] ath: regdomain 0x804c dynamically updated by user
[  104.596722] br-MGT: port 2(wlan1-1) entered blocking state
[  104.602515] br-MGT: port 2(wlan1-1) entered disabled state
[  104.608471] device wlan1-1 entered promiscuous mode
[  104.613654] br-MGT: port 2(wlan1-1) entered blocking state
[  104.619344] br-MGT: port 2(wlan1-1) entered forwarding state
[  110.212741] br-MGT: port 3(wlan0) entered blocking state
[  110.218260] br-MGT: port 3(wlan0) entered disabled state
[  110.224106] device wlan0 entered promiscuous mode
[  110.595493] br-MGT: port 3(wlan0) entered blocking state
[  110.601046] br-MGT: port 3(wlan0) entered forwarding state
[  110.634029] ------------[ cut here ]------------
[  110.639103] WARNING: CPU: 0 PID: 2163 at backports-2017-11-01/net/mac80211/driver-ops.h:167 ieee80211_channel_switch+0x73c/0x145c [mac80211]
[  110.652478] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath pppox ppp_generic mac80211 iptable_nat iptable_mangle iptable_n
[  110.741498] CPU: 0 PID: 2163 Comm: iw Not tainted 4.9.184 #0
[  110.747337] Stack : 804676c2 00000030 00000000 00000001 864407cc 803fac07 803c5af0 00000873
[  110.756208]         80463800 000000a7 00000000 00000008 00000000 800a98ec 803cb430 80400000
[  110.765050]         00000003 000000a7 803c95a8 86635b04 00000000 800d7cfc 804676c2 00000080
[  110.773930]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  110.783024]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  110.791867]         ...
[  110.794457] Call Trace:
[  110.797073] [<8006b210>] show_stack+0x70/0x8c
[  110.801705] [<80080244>] __warn+0x110/0x118
[  110.806033] [<800802e0>] warn_slowpath_null+0x1c/0x2c
[  110.811521] [<8779da7c>] ieee80211_channel_switch+0x73c/0x145c [mac80211]
[  110.818570] ---[ end trace 2ca9776b1b5452c5 ]---
[  111.969383] random: crng init done


after some time running my dmesg gets flooded with aftera wireless interface event such as interfaces going up or down

 [85176.137055] ------------[ cut here ]------------
[85176.142034] WARNING: CPU: 0 PID: 0 at backports-2017-11-01/net/mac80211/rx.c:629 ieee80211_rx_napi+0x8a4/0x8cc [mac80211]
[85176.153375] Modules linked in: pppoe ppp_async ath9k pppox ppp_generic nf_tables_inet nf_nat_pptp nf_conntrack_pptp iptable_nat ipt_REJECT ipt_MASQUERADE ebtable_nat ebtable_filter ebtable_broute ath9k_common ath10k_pci ath10k_core xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_state xt_recent xt_quota xt_pkttype xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_iface xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_LED xt_HL xt_DSCP xt_CT xt_CLASSIFY ts_fsm ts_bm slhc nft_set_rbtree nft_set_hash nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir_ipv4 nft_redir nft_quota nft_numgen nft_nat nft_meta nft_masq_ipv4 nft_masq nft_log nft_limit nft_exthdr nft_ct nft_counter
[85176.227405]  nft_chain_route_ipv6 nft_chain_route_ipv4 nft_chain_nat_ipv4 nf_tables_ipv6 nf_tables_ipv4 nf_tables nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv6 nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv6 nf_nat_ipv6 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast ts_kmp nf_conntrack_amanda mac80211 iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables ebtables ebt_vlan ebt_stp ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_ip6 ebt_among ebt_802_3 crc_itu_t crc_ccitt ath9k_hw ath arptable_filter arpt_mangle arp_tables sch_cake act_connmark nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress ledtrig_oneshot ledtrig_heartbeat ledtrig_gpio batman_adv libcrc32c cfg80211 compat xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables bonding ip6_gre ip_gre gre ifb ip6_tunnel tunnel6 ip_tunnel tun mpls_gso mpls_iptunnel mpls_router eeprom_93cx6 vxlan udp_tunnel ip6_udp_tunnel ledtrig_transient ehci_platform ehci_hcd gpio_button_hotplug button_hotplug input_core usbcore nls_base usb_common crc16 crc32c_generic crypto_hash
[85176.390181] CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.9.120 #0
[85176.397457] Stack : 804b7672 00000040 00000000 00000001 804455fc 80445267 8040dd88 00000000
[85176.406156]         804b37c0 00000275 00000004 86b35f18 00000000 800a957c 804135f8 80440000
[85176.414856]         00000003 00000275 804117b0 87c09d2c 00000000 800d8cfc 804b7672 0000006d
[85176.423556]         804573d0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[85176.432256]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[85176.440957]         ...
[85176.443494] Call Trace:
[85176.446019] [<8006b280>] show_stack+0x70/0x8c
[85176.450541] [<800802f4>] __warn+0x110/0x118
[85176.454863] [<80080390>] warn_slowpath_null+0x1c/0x2c
[85176.460255] [<870256f4>] ieee80211_rx_napi+0x8a4/0x8cc [mac80211]
[85176.466657] [<8680719c>] ath_rx_tasklet+0xba0/0xcd8 [ath9k]
[85176.472442] [<868047d4>] ath9k_tasklet+0x1a8/0x218 [ath9k]
[85176.478112] [<800833e4>] tasklet_action+0x8c/0xc4
[85176.482979] [<80082cbc>] __do_softirq+0x164/0x294
[85176.487839] [<801f3e88>] plat_irq_dispatch+0xf8/0x110
[85176.493081] [<80066378>] handle_int+0x138/0x144
[85176.497764] [<80067e6c>] r4k_wait_irqoff+0x18/0x24
[85176.502724] [<800a43c8>] cpu_startup_entry+0xa8/0xe0
[85176.507867] [<80469b90>] start_kernel+0x444/0x464
[85176.512738] ---[ end trace 730d2fbada3594cc ]---

opkg-list installed

arptables - 2015-05-20-f4ab8f63-1
ath9k-htc-firmware - 2017-09-06-a61ac5cf-1
base-files - 192-r7258-5eb055306f
batctl - 2018.1-0
busybox - 1.28.3-4
ca-bundle - 20180409
ca-certificates - 20180409
coova-chilli - 1.3.0+20141128-6
curl - 7.60.0-3
dnsmasq-full - 2.80test3-1
dropbear - 2017.75-5
ethtool - 4.15-1
firewall - 2018-07-26-aa8846bb-1
freeradius3 - release_3_0_11-3
freeradius3-common - release_3_0_11-3
fstools - 2018-04-16-e2436836-1
fwtool - 1
gre - 1-8
hostapd-common - 2018-04-09-fa617ee6-5
ip-bridge - 4.16.0-4
ip-full - 4.16.0-4
ip6tables - 1.6.2-1
iperf3 - 3.5-1
iptables - 1.6.2-1
iptables-mod-conntrack-extra - 1.6.2-1
iptables-mod-extra - 1.6.2-1
iptables-mod-filter - 1.6.2-1
iptables-mod-iface - 2.14-4
iptables-mod-ipopt - 1.6.2-1
iptables-mod-led - 1.6.2-1
iw - 4.14-1
iwinfo - 2018-07-24-94b1366d-1
jshn - 2018-07-25-c83a84af-1
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 4.9.120-1-a2e1b2cfaa4dcfcd239532722f434a93
kmod-arptables - 4.9.120-1
kmod-ath - 4.9.120+2017-11-01-1
kmod-ath10k - 4.9.120+2017-11-01-1
kmod-ath9k - 4.9.120+2017-11-01-1
kmod-ath9k-common - 4.9.120+2017-11-01-1
kmod-batman-adv - 4.9.120+2018.1-2
kmod-bonding - 4.9.120-1
kmod-button-hotplug - 4.9.120-3
kmod-cfg80211 - 4.9.120+2017-11-01-1
kmod-crypto-crc32c - 4.9.120-1
kmod-crypto-hash - 4.9.120-1
kmod-ebtables - 4.9.120-1
kmod-ebtables-ipv6 - 4.9.120-1
kmod-eeprom-93cx6 - 4.9.120-1
kmod-gpio-button-hotplug - 4.9.120-2
kmod-gre - 4.9.120-1
kmod-gre6 - 4.9.120-1
kmod-hwmon-core - 4.9.120-1
kmod-ifb - 4.9.120-1
kmod-input-core - 4.9.120-1
kmod-ip6-tunnel - 4.9.120-1
kmod-ip6tables - 4.9.120-1
kmod-ipt-conntrack - 4.9.120-1
kmod-ipt-conntrack-extra - 4.9.120-1
kmod-ipt-core - 4.9.120-1
kmod-ipt-extra - 4.9.120-1
kmod-ipt-filter - 4.9.120-1
kmod-ipt-iface - 4.9.120+2.14-4
kmod-ipt-ipopt - 4.9.120-1
kmod-ipt-ipset - 4.9.120-1
kmod-ipt-led - 4.9.120-1
kmod-ipt-nat - 4.9.120-1
kmod-ipt-nat-extra - 4.9.120-1
kmod-ipt-raw - 4.9.120-1
kmod-iptunnel - 4.9.120-1
kmod-iptunnel6 - 4.9.120-1
kmod-leds-gpio - 4.9.120-1
kmod-ledtrig-default-on - 4.9.120-1
kmod-ledtrig-gpio - 4.9.120-1
kmod-ledtrig-heartbeat - 4.9.120-1
kmod-ledtrig-netdev - 4.9.120-1
kmod-ledtrig-oneshot - 4.9.120-1
kmod-ledtrig-timer - 4.9.120-1
kmod-ledtrig-transient - 4.9.120-1
kmod-lib-crc-ccitt - 4.9.120-1
kmod-lib-crc-itu-t - 4.9.120-1
kmod-lib-crc16 - 4.9.120-1
kmod-lib-crc32c - 4.9.120-1
kmod-lib-textsearch - 4.9.120-1
kmod-libphy - 4.9.120-1
kmod-mac80211 - 4.9.120+2017-11-01-1
kmod-mpls - 4.9.120-1
kmod-nf-conntrack - 4.9.120-1
kmod-nf-conntrack-netlink - 4.9.120-1
kmod-nf-conntrack6 - 4.9.120-1
kmod-nf-ipt - 4.9.120-1
kmod-nf-ipt6 - 4.9.120-1
kmod-nf-nat - 4.9.120-1
kmod-nf-nat6 - 4.9.120-1
kmod-nf-nathelper - 4.9.120-1
kmod-nf-nathelper-extra - 4.9.120-1
kmod-nf-reject - 4.9.120-1
kmod-nf-reject6 - 4.9.120-1
kmod-nfnetlink - 4.9.120-1
kmod-nft-core - 4.9.120-1
kmod-nft-nat - 4.9.120-1
kmod-nls-base - 4.9.120-1
kmod-ppp - 4.9.120-1
kmod-pppoe - 4.9.120-1
kmod-pppox - 4.9.120-1
kmod-sched-cake - 4.9.120+2018-07-16-f39ab9a4-1
kmod-sched-connmark - 4.9.120-1
kmod-sched-core - 4.9.120-1
kmod-slhc - 4.9.120-1
kmod-swconfig - 4.9.120-1
kmod-tun - 4.9.120-1
kmod-udptunnel4 - 4.9.120-1
kmod-udptunnel6 - 4.9.120-1
kmod-usb-core - 4.9.120-1
kmod-usb-ehci - 4.9.120-1
kmod-usb2 - 4.9.120-1
kmod-vxlan - 4.9.120-1
libattr - 20170915-1
libbfd - 2.27-1
libblobmsg-json - 2018-07-25-c83a84af-1
libc - 1.1.19-1
libcap - 2.25-2
libcares - 1.14.0-1
libcurl - 7.60.0-3
libgcc - 7.3.0-1
libgmp - 6.1.2-1
libiconv-full - 1.11.1-3
libintl-full - 0.19.8.1-1
libip4tc - 1.6.2-1
libip6tc - 1.6.2-1
libiwinfo - 2018-07-24-94b1366d-1
libiwinfo-lua - 2018-07-24-94b1366d-1
libjson-c - 0.12.1-1
libjson-script - 2018-07-25-c83a84af-1
libltdl - 2.4.6-1
liblua - 5.1.5-1
liblzo - 2.10-1
libmbedtls - 2.12.0-1
libmnl - 1.0.4-1
libmosquitto-ssl - 1.5-3
libncurses - 6.1-1
libnetfilter-conntrack - 2017-07-25-e8704326-1
libnetsnmp - 5.7.3-9
libnettle - 3.3-1
libnfnetlink - 1.0.1-1
libnl-core - 3.3.0-1
libnl-genl - 3.3.0-1
libnl-tiny - 0.1-5
libopcodes - 2.27-1
libopenssl - 1.0.2p-1
libpcap - 1.8.1-1
libpcre - 8.41-2
libpthread - 1.1.19-1
libreadline - 7.0-1
librrd1 - 1.0.50-2
librt - 1.1.19-1
libtalloc - 2.1.11-1
libubox - 2018-07-25-c83a84af-1
libubus - 2018-07-26-40e0931e-1
libubus-lua - 2018-07-26-40e0931e-1
libuci - 2018-08-11-4c8b4d6e-1
libuci-lua - 2018-08-11-4c8b4d6e-1
libuclient - 2018-08-03-ae1c656f-1
libustream-openssl - 2018-05-22-5322f9db-1
libuuid - 2.32-2
libwebsockets-openssl - 2.4.1-2
libxtables - 1.6.2-1
logd - 2018-02-14-128bc35f-2
lua - 5.1.5-1
luafilesystem - 1.6.2-1
luci - git-17.060.28258-2685855-1
luci-app-firewall - git-17.060.28258-2685855-1
luci-app-openvpn - git-17.060.28258-2685855-1
luci-app-qos - git-17.060.28258-2685855-1
luci-app-uhttpd - 1.0.0-1
luci-base - git-17.060.28258-2685855-1
luci-lib-ip - git-17.060.28258-2685855-1
luci-lib-json - git-17.060.28258-2685855-1
luci-lib-jsonc - git-17.060.28258-2685855-1
luci-lib-nixio - git-17.060.28258-2685855-1
luci-mod-admin-full - git-17.060.28258-2685855-1
luci-mod-rpc - git-17.060.28258-2685855-1
luci-proto-ipv6 - git-17.060.28258-2685855-1
luci-proto-ppp - git-17.060.28258-2685855-1
luci-theme-bootstrap - git-17.060.28258-2685855-1
mosquitto-client-ssl - 1.5-3
mosquitto-ssl - 1.5-3
mtd - 23
mtr - 0.85+newdns-dd2b75080bc5406ba0b438953b36b72204ba114b-2
netifd - 2018-07-30-a0a1e52e-1
ntpclient - 2010_365-1
odhcp6c - 2018-07-14-67ae6a71-14
odhcpd-ipv6only - 1.10-1
openssl-util - 1.0.2p-1
openvpn-openssl - 2.4.5-4
openwisp-config-openssl - 0.4.5-2
openwrt-keyring - 2018-05-18-103a32e9-1
opkg - 2017-12-07-3b417b9f-2
ppp - 2.4.7-12
ppp-mod-pppoe - 2.4.7-12
procd - 2018-03-28-dfb68f85-1
qos-scripts - 1.3.1-1
relayd - 2016-02-07-ad0b25ad-2
resolveip - 2
rpcd - 2018-08-16-41333abe-1
rpcd-mod-file - 2018-08-16-41333abe-1
rpcd-mod-iwinfo - 2018-08-16-41333abe-1
rpcd-mod-rpcsys - 2018-08-16-41333abe-1
rrdtool1 - 1.0.50-2
snmp-utils - 5.7.3-9
snmpd - 5.7.3-9
sqm-scripts - 1.2.3-1
sqm-scripts-extra - 2016-06-08-1
swconfig - 11
tc - 4.16.0-4
tcpdump-mini - 4.9.2-1
terminfo - 6.1-1
uboot-envtools - 2018.03-1
ubox - 2018-02-14-128bc35f-2
ubus - 2018-07-26-40e0931e-1
ubusd - 2018-07-26-40e0931e-1
uci - 2018-08-11-4c8b4d6e-1
uclient-fetch - 2018-08-03-ae1c656f-1
uhttpd - 2018-06-26-796d42bc-1
uhttpd-mod-ubus - 2018-06-26-796d42bc-1
usign - 2015-07-04-ef641914-1
wifischedule - 1-2
wireless-regdb - 2017-10-20-4343d359
wireless-tools - 29-5
wpa-cli - 2018-04-09-fa617ee6-5
wpad-mesh - 2018-04-09-fa617ee6-5
zabbix-agentd - 3.2.7-2
zabbix-extra-mac80211 - 3.2.7-2
zabbix-extra-network - 3.2.7-2
zabbix-extra-wifi - 3.2.7-2
zlib - 1.2.11-2

If I disable the wireless interfaces the messages stop. Also sometimes the AP reboot on its own I’m attaching a dmesg I manage so get when the AP reboots.

Showing tasks 151 - 200 of 945 Page 4 of 19<<First - 2 - 3 - 4 - 5 - 6 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing