All Projects

IDCategoryTask TypePrioritySeveritySummaryReported InStatus
 2046 OtherBug ReportLowMedium No snapshot builds have been uploaded for ramips/mt76x8 ...TrunkClosed Task Description

The last builds are a month old:
https://downloads.openwrt.org/snapshots/targets/ramips/mt76x8/

Build failures:
http://phase1.builds.lede-project.org/builders/ramips%2Fmt76x8

There are mentions of the lack of new mt76x8 builds on the forum and interest in testing the latest mt76 drivers, but no one has filed a bug report yet.

 1579 Base systemBug ReportVery LowLow mt7620 broken SD/MMC due to recent commits TrunkClosed Task Description

After https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=8a570921b5ba49a2d3824f1220e4c53809063468 SD/MMC no longer works.

Looking at the history of the sd.c file, the commit named “ramips: Add back some non-mt7621 code that staging removed” should dependent on “ramips: mmc: Sync with staging driver”.

Either both commits should be reverted or both should stay.

 1560 KernelBug ReportVery LowMedium mt7620 regression - no SD/MMC TrunkClosed Task Description

SD card no longer works on gl-mt300a

not working: OpenWrt SNAPSHOT r7020-43d70a7
working: OpenWrt SNAPSHOT r6911-0ed9281fda (1 week old)

dmesg of non-working version:
[ 0.000000] Linux version 4.14.42 (buildbot@slashdirt-03) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7020-43d70a7)) #0 Wed May 23 13:40:16 2018
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[ 0.000000] MIPS: machine is GL-MT300A
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 8047af90, node_mem_map 81000040
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x47c with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=0007def0
[ 0.000000] Readback ErrCtl register=0007def0
[ 0.000000] Memory: 124820K/131072K available (3557K kernel code, 179K rwdata, 856K rodata, 200K init, 222K bss, 6252K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 256
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[ 0.000000] systick: enable autosleep mode
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[ 0.000013] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[ 0.007595] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.073551] pid_max: default: 32768 minimum: 301
[ 0.078270] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.084649] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.097419] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.106961] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.112958] pinctrl core: initialized pinctrl subsystem
[ 0.119270] NET: Registered protocol family 16
[ 0.148492] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.153888] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.160280] rt2880_gpio 10000638.gpio: registering 16 gpios
[ 0.165650] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[ 0.172039] rt2880_gpio 10000660.gpio: registering 32 gpios
[ 0.177412] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[ 0.183796] rt2880_gpio 10000688.gpio: registering 1 gpios
[ 0.189084] rt2880_gpio 10000688.gpio: registering 1 irq handlers
[ 0.199791] clocksource: Switched to clocksource systick
[ 0.206150] NET: Registered protocol family 2
[ 0.211366] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.218095] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.224313] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.230576] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.236203] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.242607] NET: Registered protocol family 1
[ 0.246800] PCI: CLS 0 bytes, default 32
[ 0.249172] rt-timer 10000100.timer: maximum frequency is 1220Hz
[ 0.255877] Crashlog allocated RAM at address 0x3f00000
[ 0.262370] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.274475] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.280120] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 0.298334] io scheduler noop registered
[ 0.302138] io scheduler deadline registered (default)
[ 0.308047] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.317219] console [ttyS0] disabled
[ 0.320731] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[ 0.330341] console [ttyS0] enabled
[ 0.337384] bootconsole [early0] disabled
[ 0.346215] cacheinfo: Failed to find cpu0 device node
[ 0.351502] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.364158] spi spi0.0: force spi mode3
[ 0.379532] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.384407] 5 fixed-partitions partitions found on MTD device spi0.0
[ 0.390902] Creating 5 MTD partitions on “spi0.0”:
[ 0.395798] 0×000000000000-0×000000030000 : “u-boot” [ 0.401794] 0×000000030000-0×000000040000 : “u-boot-env” [ 0.408062] 0×000000040000-0×000000050000 : “factory” [ 0.414157] 0×000000050000-0x000000fd0000 : “firmware” [ 2.272888] 2 uimage-fw partitions found on MTD device firmware
[ 2.278956] 0×000000050000-0x0000001c73e9 : “kernel” [ 2.284942] 0x0000001c73e9-0x000000fd0000 : “rootfs” [ 2.290882] mtd: device 5 (rootfs) set to be root filesystem
[ 2.297996] 1 squashfs-split partitions found on MTD device rootfs
[ 2.304388] 0x0000006e3000-0x000000fd0000 : “rootfs_data” [ 2.310852] 0x000000ff0000-0×000001000000 : “art” [ 2.317229] libphy: Fixed MDIO Bus: probed
[ 2.326342] gsw: setting port4 to ephy mode
[ 2.330698] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 1 link up (100Mbps/Full duplex)
[ 2.340261] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[ 2.347012] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[ 2.356012] rt2880_wdt 10000120.watchdog: Initialized
[ 2.362612] NET: Registered protocol family 10
[ 2.370966] Segment Routing with IPv6
[ 2.374835] NET: Registered protocol family 17
[ 2.379418] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.392696] 8021q: 802.1Q VLAN Support v1.8
[ 2.411575] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 2.419908] Freeing unused kernel memory: 200K
[ 2.424443] This architecture does not have kernel memory protection.
[ 2.509739] random: fast init done
[ 3.942928] init: Console is alive
[ 3.946625] init: - watchdog -
[ 6.346368] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.754898] usbcore: registered new interface driver usbfs
[ 6.760692] usbcore: registered new interface driver hub
[ 6.766233] usbcore: registered new device driver usb
[ 6.792503] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 6.808071] SCSI subsystem initialized
[ 6.817169] ehci-platform: EHCI generic platform driver
[ 6.832927] phy phy-usbphy.0: remote usb device wakeup disabled
[ 6.838975] phy phy-usbphy.0: UTMI 16bit 30MHz
[ 6.843547] ehci-platform 101c0000.ehci: EHCI Host Controller
[ 6.849447] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[ 6.857663] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 6.873059] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 6.880460] hub 1-0:1.0: USB hub found
[ 6.884708] hub 1-0:1.0: 1 port detected
[ 6.892152] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 6.900216] ohci-platform: OHCI generic platform driver
[ 6.905932] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[ 6.912891] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[ 6.921094] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[ 6.954790] hub 2-0:1.0: USB hub found
[ 6.959026] hub 2-0:1.0: 1 port detected
[ 7.002845] usbcore: registered new interface driver usb-storage
[ 7.009680] mtk-sd 10130000.sdhci: no support for card’s volts
[ 7.015690] mmc0: error -22 whilst initialising SDIO card
[ 7.024251] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 7.032634] mtk-sd 10130000.sdhci: no support for card’s volts
[ 7.038655] mmc0: error -22 whilst initialising MMC card
[ 7.044485] init: - preinit -
[ 7.113471] mtk-sd 10130000.sdhci: no support for card’s volts
[ 7.119469] mmc0: error -22 whilst initialising SDIO card
[ 7.137982] mtk-sd 10130000.sdhci: no support for card’s volts
[ 7.143939] mmc0: error -22 whilst initialising MMC card
[ 7.223420] mtk-sd 10130000.sdhci: no support for card’s volts
[ 7.229402] mmc0: error -22 whilst initialising SDIO card
[ 7.247699] mtk-sd 10130000.sdhci: no support for card’s volts
[ 7.253658] mmc0: error -22 whilst initialising MMC card
[ 8.879222] 8021q: adding VLAN 0 to HW filter on device eth0
[ 10.164019] mount_root: loading kmods from internal overlay
[ 10.205442] kmodloader: loading kernel modules from etc/modules-boot.d/*
[ 10.214416] kmodloader: done loading kernel modules from
etc/modules-boot.d/*
[ 13.839798] jffs2: notice: (420) jffs2_build_xattr_subsystem: complete building xattr subsystem, 7 of xdatum (3 unchecked, 4 orphan) and 20 of xref (4 dead, 0 orphan) found.
[ 13.856756] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 13.874808] block: extroot: not configured
[ 15.123683] jffs2: notice: (418) jffs2_build_xattr_subsystem: complete building xattr subsystem, 7 of xdatum (3 unchecked, 4 orphan) and 20 of xref (4 dead, 0 orphan) found.
[ 17.012610] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 17.026388] block: extroot: not configured
[ 17.032103] mount_root: switching to jffs2 overlay
[ 17.071832] overlayfs: upper fs does not support tmpfile.
[ 17.081804] urandom-seed: Seeding with /etc/urandom.seed
[ 17.222211] procd: - early -
[ 17.225263] procd: - watchdog -
[ 17.857777] procd: - watchdog -
[ 17.861298] procd: - ubus -
[ 18.122038] random: ubusd: uninitialized urandom read (4 bytes read)
[ 18.132413] random: ubusd: uninitialized urandom read (4 bytes read)
[ 18.139536] random: ubusd: uninitialized urandom read (4 bytes read)
[ 18.147146] procd: - init -
[ 18.722278] kmodloader: loading kernel modules from /etc/modules.d/*
[ 18.736661] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 18.756386] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 18.764564] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 18.776029] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.792533] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 18.874233] xt_time: kernel timezone is -0000
[ 19.015331] PPP generic driver version 2.4.2
[ 19.031142] NET: Registered protocol family 24
[ 19.108869] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device “factory” [ 19.116320] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
[ 19.124234] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
[ 19.131974] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’ [ 19.266721] usbcore: registered new interface driver rt2800usb
[ 19.282685] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 20.859041] urandom_read: 5 callbacks suppressed
[ 20.859051] random: jshn: uninitialized urandom read (4 bytes read)
[ 20.958357] random: ubusd: uninitialized urandom read (4 bytes read)
[ 28.369105] 8021q: adding VLAN 0 to HW filter on device eth0
[ 28.404401] device eth0 entered promiscuous mode
[ 28.417622] br-lan: port 1(eth0.1) entered blocking state
[ 28.423149] br-lan: port 1(eth0.1) entered disabled state
[ 28.429118] device eth0.1 entered promiscuous mode
[ 28.513479] br-lan: port 1(eth0.1) entered blocking state
[ 28.519063] br-lan: port 1(eth0.1) entered forwarding state
[ 28.524950] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 30.398753] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 34.765563] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.789279] br-lan: port 2(wlan0) entered blocking state
[ 34.794718] br-lan: port 2(wlan0) entered disabled state
[ 34.800610] device wlan0 entered promiscuous mode
[ 35.996759] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.003454] br-lan: port 2(wlan0) entered blocking state
[ 36.008954] br-lan: port 2(wlan0) entered forwarding state

dmesg of working version:
[ 0.000000] Linux version 4.14.37 (buildbot@buildslave) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6911-0ed9281fda)) #0 Wed May 16 12:36:22 2018
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[ 0.000000] MIPS: machine is GL-MT300A
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0×0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 8047af60, node_mem_map 81000040
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x47c with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=0007def1
[ 0.000000] Readback ErrCtl register=0007def1
[ 0.000000] Memory: 124820K/131072K available (3556K kernel code, 180K rwdata, 856K rodata, 200K init, 222K bss, 6252K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 256
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[ 0.000000] systick: enable autosleep mode
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[ 0.000013] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[ 0.007596] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.073555] pid_max: default: 32768 minimum: 301
[ 0.078278] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.084660] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.097416] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.106956] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.112952] pinctrl core: initialized pinctrl subsystem
[ 0.119268] NET: Registered protocol family 16
[ 0.148345] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.153739] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.160112] rt2880_gpio 10000638.gpio: registering 16 gpios
[ 0.165485] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[ 0.171875] rt2880_gpio 10000660.gpio: registering 32 gpios
[ 0.177249] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[ 0.183634] rt2880_gpio 10000688.gpio: registering 1 gpios
[ 0.188923] rt2880_gpio 10000688.gpio: registering 1 irq handlers
[ 0.199654] clocksource: Switched to clocksource systick
[ 0.205992] NET: Registered protocol family 2
[ 0.211211] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.217938] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.224160] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.230432] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.236060] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.242466] NET: Registered protocol family 1
[ 0.246659] PCI: CLS 0 bytes, default 32
[ 0.249037] rt-timer 10000100.timer: maximum frequency is 1220Hz
[ 0.255714] Crashlog allocated RAM at address 0x3f00000
[ 0.262225] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.274444] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.280092] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 0.298319] io scheduler noop registered
[ 0.302121] io scheduler deadline registered (default)
[ 0.308014] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.317203] console [ttyS0] disabled
[ 0.320713] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[ 0.330323] console [ttyS0] enabled
[ 0.337364] bootconsole [early0] disabled
[ 0.346199] cacheinfo: Failed to find cpu0 device node
[ 0.351487] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.364122] spi spi0.0: force spi mode3
[ 0.379448] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.384324] 5 fixed-partitions partitions found on MTD device spi0.0
[ 0.390817] Creating 5 MTD partitions on “spi0.0”:
[ 0.395715] 0×000000000000-0×000000030000 : “u-boot” [ 0.401704] 0×000000030000-0×000000040000 : “u-boot-env” [ 0.407966] 0×000000040000-0×000000050000 : “factory” [ 0.414060] 0×000000050000-0x000000fd0000 : “firmware” [ 2.244279] 2 uimage-fw partitions found on MTD device firmware
[ 2.250366] 0×000000050000-0x0000001c7130 : “kernel” [ 2.256332] 0x0000001c7130-0x000000fd0000 : “rootfs” [ 2.262267] mtd: device 5 (rootfs) set to be root filesystem
[ 2.269401] 1 squashfs-split partitions found on MTD device rootfs
[ 2.275791] 0x00000076a000-0x000000fd0000 : “rootfs_data” [ 2.282260] 0x000000ff0000-0×000001000000 : “art” [ 2.288623] libphy: Fixed MDIO Bus: probed
[ 2.297786] gsw: setting port4 to ephy mode
[ 2.302142] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 1 link up (100Mbps/Full duplex)
[ 2.311706] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[ 2.318460] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[ 2.327453] rt2880_wdt 10000120.watchdog: Initialized
[ 2.334050] NET: Registered protocol family 10
[ 2.342390] Segment Routing with IPv6
[ 2.346257] NET: Registered protocol family 17
[ 2.350914] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.364148] 8021q: 802.1Q VLAN Support v1.8
[ 2.383505] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 2.391844] Freeing unused kernel memory: 200K
[ 2.396380] This architecture does not have kernel memory protection.
[ 2.499604] random: fast init done
[ 3.900375] init: Console is alive
[ 3.904084] init: - watchdog -
[ 7.383314] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 7.832710] usbcore: registered new interface driver usbfs
[ 7.838417] usbcore: registered new interface driver hub
[ 7.844023] usbcore: registered new device driver usb
[ 8.021333] raid6: int32x1 gen() 25 MB/s
[ 8.190287] raid6: int32x1 xor() 43 MB/s
[ 8.359624] raid6: int32x2 gen() 48 MB/s
[ 8.530199] raid6: int32x2 xor() 49 MB/s
[ 8.700340] raid6: int32x4 gen() 61 MB/s
[ 8.870240] raid6: int32x4 xor() 48 MB/s
[ 9.039964] raid6: int32x8 gen() 70 MB/s
[ 9.210043] raid6: int32x8 xor() 40 MB/s
[ 9.214400] raid6: using algorithm int32x8 gen() 70 MB/s
[ 9.219827] raid6: .... xor() 40 MB/s, rmw enabled
[ 9.224712] raid6: using intx1 recovery algorithm
[ 9.230784] xor: measuring software checksum speed
[ 9.329596] 8regs : 439.200 MB/sec
[ 9.429593] 8regs_prefetch: 417.200 MB/sec
[ 9.529592] 32regs : 499.600 MB/sec
[ 9.629591] 32regs_prefetch: 460.000 MB/sec
[ 9.634302] xor: using function: 32regs (499.600 MB/sec)
[ 10.252110] Btrfs loaded, crc32c=crc32c-generic
[ 10.278348] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 10.294638] SCSI subsystem initialized
[ 10.303894] ehci-platform: EHCI generic platform driver
[ 10.319620] phy phy-usbphy.0: remote usb device wakeup disabled
[ 10.325670] phy phy-usbphy.0: UTMI 16bit 30MHz
[ 10.330243] ehci-platform 101c0000.ehci: EHCI Host Controller
[ 10.336137] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[ 10.344354] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 10.360830] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 10.368223] hub 1-0:1.0: USB hub found
[ 10.372472] hub 1-0:1.0: 1 port detected
[ 10.380019] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 10.388135] ohci-platform: OHCI generic platform driver
[ 10.393857] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[ 10.400863] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[ 10.409033] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[ 10.442648] hub 2-0:1.0: USB hub found
[ 10.446936] hub 2-0:1.0: 1 port detected
[ 10.464850] MTK MSDC device init.
[ 10.489279] mtk-sd: MediaTek MT6575 MSDC Driver
[ 10.502093] usbcore: registered new interface driver usb-storage
[ 10.513331] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 10.526367] init: - preinit -
[ 10.559577] mmc0: new high speed SDHC card at address b368
[ 10.569512] mmcblk0: mmc0:b368 H0240 7.46 GiB
[ 10.581509] mmcblk0: p1
[ 12.330319] 8021q: adding VLAN 0 to HW filter on device eth0
[ 13.607470] mount_root: loading kmods from internal overlay
[ 13.653389] kmodloader: loading kernel modules from etc/modules-boot.d/*
[ 13.662438] kmodloader: done loading kernel modules from
etc/modules-boot.d/*
[ 17.274494] jffs2: notice: (444) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (3 unchecked, 1 orphan) and 13 of xref (1 dead, 0 orphan) found.
[ 17.291521] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 17.309108] block: extroot: not configured
[ 18.471983] jffs2: notice: (442) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (3 unchecked, 1 orphan) and 13 of xref (1 dead, 0 orphan) found.
[ 20.421932] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 20.436280] block: extroot: not configured
[ 20.441969] mount_root: switching to jffs2 overlay
[ 20.493605] overlayfs: upper fs does not support tmpfile.
[ 20.503850] urandom-seed: Seeding with /etc/urandom.seed
[ 20.644091] procd: - early -
[ 20.647146] procd: - watchdog -
[ 21.244777] procd: - watchdog -
[ 21.248307] procd: - ubus -
[ 21.643194] random: ubusd: uninitialized urandom read (4 bytes read)
[ 21.660074] random: ubusd: uninitialized urandom read (4 bytes read)
[ 21.667325] random: ubusd: uninitialized urandom read (4 bytes read)
[ 21.701819] random: ubusd: uninitialized urandom read (4 bytes read)
[ 21.709283] random: ubusd: uninitialized urandom read (4 bytes read)
[ 21.716847] random: ubusd: uninitialized urandom read (4 bytes read)
[ 21.724649] random: ubusd: uninitialized urandom read (4 bytes read)
[ 21.733120] random: ubusd: uninitialized urandom read (4 bytes read)
[ 21.740046] random: ubusd: uninitialized urandom read (4 bytes read)
[ 21.747446] random: ubusd: uninitialized urandom read (4 bytes read)
[ 21.755284] procd: - init -
[ 22.340053] F2FS-fs (mmcblk0p1): Mounted with checkpoint version = 28739a2c
[ 22.579555] kmodloader: loading kernel modules from /etc/modules.d/*
[ 22.621688] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 22.647912] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 22.656154] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 22.685411] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.815556] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 22.903635] xt_time: kernel timezone is -0000
[ 23.035915] PPP generic driver version 2.4.2
[ 23.051348] NET: Registered protocol family 24
[ 23.130687] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device “factory” [ 23.138081] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
[ 23.146009] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
[ 23.153734] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’ [ 23.286511] usbcore: registered new interface driver rt2800usb
[ 23.302465] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 32.513617] 8021q: adding VLAN 0 to HW filter on device eth0
[ 32.557755] device eth0 entered promiscuous mode
[ 32.568223] br-lan: port 1(eth0.1) entered blocking state
[ 32.573987] br-lan: port 1(eth0.1) entered disabled state
[ 32.579857] device eth0.1 entered promiscuous mode
[ 32.646719] br-lan: port 1(eth0.1) entered blocking state
[ 32.652305] br-lan: port 1(eth0.1) entered forwarding state
[ 32.658211] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 34.498590] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 39.127785] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.147659] br-lan: port 2(wlan0) entered blocking state
[ 39.153169] br-lan: port 2(wlan0) entered disabled state
[ 39.159039] device wlan0 entered promiscuous mode
[ 41.178797] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 41.185545] br-lan: port 2(wlan0) entered blocking state
[ 41.191011] br-lan: port 2(wlan0) entered forwarding state
[ 55.062359] random: crng init done

 1500 Base systemBug ReportVery LowMedium GL-MT300A: No network after boot TrunkClosed Task Description

Device affected: GL.iNet GL-MT300A

17.01.4 works fine.

Flashing snapshot image “openwrt-ramips-mt7620-gl-mt300a-squashfs-sysupgrade.bin” results in no network functionality.

Kernel boot log shows “Failed to connect to the switch.” “swconfig list” shows nothing.


U-Boot 1.1.3 (Dec 23 2015 - 18:37:46)

Board: Ralink APSoC DRAM:  128 MB
relocate_code Pointer2 at: 87fac000
enable ephy clock...done. rf reg 29 = 5
SSC disabled.
spi_wait_nsec: 29
spi device id: ef 40 18 0 0 (40180000)
find flash: W25Q128FV
*** Warning - bad CRC, using default environment

======================================================
uboot-gl-mt7620 version: 0.0.0.1
--------------------------------------------------
ASIC 7620_MP (Port5<->None)
DRAM component: 1024 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 128 MBytes
Flash component: SPI Flash
Date:Dec 23 2015  Time:18:37:46
--------------------------------------------------
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768
--------------------------------------------------
 ##### The CPU freq = 580 MHZ ####
 ##### Memory size =128 Mbytes ####
======================================================

Press press WPS button for more than 2 seconds to run web failsafe mode

WPS button is pressed for:  0 second(s)

Catution: WPS button wasn't pressed or not long enough!
Continuing normal boot...


   *** ***         ** ** *****  ***   ***   ***    *
  *  *  *          ** ** * * * *   * *   * *   *   *
 *      *          ** **   *       * *   * *   *   **
 *      *    ***** ** **   *     **  *   * *   *  * *
 *  *** *          * * *   *       * *   * *   *  * *
 *   *  *          * * *   *       * *   * *   *  ****
  *  *  *   *      * * *   *   *   * *   * *   *  *  *
   **  ******      * * *  ***   ***   ***   ***  **  **


Hit SPACE to stop autoboot:  0
Found calibration data, checking calibration status...
Device calibrated. Checking MAC address...
Found MAC. Starting firmware...
## Booting image at bc050000 ...
   Image Name:   MIPS OpenWrt Linux-4.14.34
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1536066 Bytes =  1.5 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 128

Starting kernel ...

[    0.000000] Linux version 4.14.34 (buildbot@slashdirt-02) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6696-ed4ac0e)) #0 Mon Apr 16 20:01:09 2018
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[    0.000000] MIPS: machine is GL-MT300A
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x47c with crng_init=0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=0007604f
[    0.000000] Readback ErrCtl register=0007604f
[    0.000000] Memory: 124820K/131072K available (3555K kernel code, 180K rwdata, 856K rodata, 200K init, 222K bss, 6252K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 256
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[    0.000000] systick: enable autosleep mode
[    0.000000] systick: running - mult: 214748, shift: 32
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[    0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[    0.007593] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.073535] pid_max: default: 32768 minimum: 301
[    0.078261] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.084640] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.097454] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.106994] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.112979] pinctrl core: initialized pinctrl subsystem
[    0.119274] NET: Registered protocol family 16
[    0.140645] random: fast init done
[    0.151853] rt2880_gpio 10000600.gpio: registering 24 gpios
[    0.157249] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[    0.163639] rt2880_gpio 10000638.gpio: registering 16 gpios
[    0.169014] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[    0.175397] rt2880_gpio 10000660.gpio: registering 32 gpios
[    0.180772] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[    0.187152] rt2880_gpio 10000688.gpio: registering 1 gpios
[    0.192443] rt2880_gpio 10000688.gpio: registering 1 irq handlers
[    0.203204] clocksource: Switched to clocksource systick
[    0.209516] NET: Registered protocol family 2
[    0.214741] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.221469] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.227690] TCP: Hash tables configured (established 1024 bind 1024)
[    0.233957] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.239583] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.245986] NET: Registered protocol family 1
[    0.252566] rt-timer 10000100.timer: maximum frequency is 1220Hz
[    0.259266] Crashlog allocated RAM at address 0x3f00000
[    0.265779] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.277882] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.283523] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.301820] io scheduler noop registered
[    0.305623] io scheduler deadline registered (default)
[    0.311512] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.320673] console [ttyS0] disabled
[    0.324181] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[    0.333791] console [ttyS0] enabled
[    0.333791] console [ttyS0] enabled
[    0.340836] bootconsole [early0] disabled
[    0.340836] bootconsole [early0] disabled
[    0.349651] cacheinfo: Failed to find cpu0 device node
[    0.354941] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.367683] spi spi0.0: force spi mode3
[    0.382870] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.387745] 5 fixed-partitions partitions found on MTD device spi0.0
[    0.394239] Creating 5 MTD partitions on "spi0.0":
[    0.399138] 0x000000000000-0x000000030000 : "u-boot"
[    0.405119] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.411385] 0x000000040000-0x000000050000 : "factory"
[    0.417475] 0x000000050000-0x000000fd0000 : "firmware"
[    2.289339] 2 uimage-fw partitions found on MTD device firmware
[    2.295424] 0x000000050000-0x0000001c7082 : "kernel"
[    2.301392] 0x0000001c7082-0x000000fd0000 : "rootfs"
[    2.307328] mtd: device 5 (rootfs) set to be root filesystem
[    2.314500] 1 squashfs-split partitions found on MTD device rootfs
[    2.320830] 0x0000003cb000-0x000000fd0000 : "rootfs_data"
[    2.327330] 0x000000ff0000-0x000001000000 : "art"
[    2.333778] libphy: Fixed MDIO Bus: probed
[    2.338550] rt2880-pinmux pinctrl: pin io40 already requested by pinctrl; cannot claim for 10100000.ethernet
[    2.348648] rt2880-pinmux pinctrl: pin-40 (10100000.ethernet) status -22
[    2.355501] rt2880-pinmux pinctrl: could not request pin 40 (io40) from group ephy  on device rt2880-pinmux
[    2.365451] mtk_soc_eth 10100000.ethernet: Error applying setting, reverse things back
[    2.373556] mtk_soc_eth: probe of 10100000.ethernet failed with error -22
[    2.380876] rt2880_wdt 10000120.watchdog: Initialized
[    2.387506] NET: Registered protocol family 10
[    2.398149] Segment Routing with IPv6
[    2.402024] NET: Registered protocol family 17
[    2.406685] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.419918] 8021q: 802.1Q VLAN Support v1.8
[    2.438844] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    2.447179] Freeing unused kernel memory: 200K
[    2.451715] This architecture does not have kernel memory protection.
[    3.851019] init: Console is alive
[    3.854826] init: - watchdog -
[    5.771751] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    6.032755] usbcore: registered new interface driver usbfs
[    6.038545] usbcore: registered new interface driver hub
[    6.044104] usbcore: registered new device driver usb
[    6.055363] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.063853] ehci-platform: EHCI generic platform driver
[    6.079564] phy phy-usbphy.0: remote usb device wakeup disabled
[    6.085620] phy phy-usbphy.0: UTMI 16bit 30MHz
[    6.090169] ehci-platform 101c0000.ehci: EHCI Host Controller
[    6.096076] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[    6.104283] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    6.118485] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    6.125830] hub 1-0:1.0: USB hub found
[    6.130122] hub 1-0:1.0: 1 port detected
[    6.137440] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.145489] ohci-platform: OHCI generic platform driver
[    6.151221] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[    6.158206] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[    6.166392] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[    6.200164] hub 2-0:1.0: USB hub found
[    6.204409] hub 2-0:1.0: 1 port detected
[    6.212749] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.224295] init: - preinit -
Failed to connect to the switch. Use the "list" command to see which switches are available.
Failed to connect to the switch. Use the "list" command to see which switches are available.
Failed to connect to the switch. Use the "list" command to see which switches are available.
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   10.681955] jffs2: notice: (381) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (0 unchecked, 3 orphan) and 3 of xref (3 dead, 0 orphan) found.
[   10.700657] mount_root: switching to jffs2 overlay
[   10.736502] overlayfs: upper fs does not support tmpfile.
[   10.751783] urandom-seed: Seeding with /etc/urandom.seed
[   11.013075] procd: - early -
[   11.016946] procd: - watchdog -
[   11.453532] procd: - watchdog -
[   11.457049] procd: - ubus -
[   11.537345] procd: - init -
Please press Enter to activate this console.
[   11.915869] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.929394] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.947931] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   11.956182] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   11.967502] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.983109] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[   12.059562] xt_time: kernel timezone is -0000
[   12.236054] PPP generic driver version 2.4.2
[   12.243314] NET: Registered protocol family 24
[   12.279702] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory"
[   12.287156] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
[   12.295081] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
[   12.320640] kmodloader: done loading kernel modules from /etc/modules.d/*



BusyBox v1.28.3 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r6696-ed4ac0e
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:/# lsmod
cfg80211              212900  5 rt2x00lib,mt76x2e,mt7603e,mt76,mac80211
compat                   667  4 rt2800soc,rt2800pci,mac80211,cfg80211
crc_ccitt               1035  2 rt2800lib,ppp_async
crc_itu_t               1035  0
eeprom_93cx6            2250  1 rt2800pci
ehci_hcd               32759  1 ehci_platform
ehci_platform           4464  0
gpio_button_hotplug     6288  0
ip_tables              10317  3 iptable_nat,iptable_mangle,iptable_filter
ip6_tables             10081  2 ip6table_mangle,ip6table_filter
ip6t_REJECT              976  2
ip6table_filter          688  1
ip6table_mangle         1168  0
ipt_MASQUERADE           720  1
ipt_REJECT               944  2
iptable_filter           688  1
iptable_mangle           912  0
iptable_nat              752  1
leds_gpio               2832  0
mac80211              411999  7 rt2800lib,rt2x00soc,rt2x00pci,rt2x00lib,mt76x2e,mt7603e,mt76
mt76                   19656  2 mt76x2e,mt7603e
mt7603e                29737  0
mt76x2e                44217  0
nf_conntrack           60765 13 nf_conntrack_ipv6,ipt_MASQUERADE,xt_state,xt_nat,xt_conntrack,xt_REDIRECT,xt_CT,nf_nat_masquerade_ipv4,nf_conntrack_ipv4,nf_nat_ipv4,nf_nat,nf_flow_table,nf_conntrack_rtcache
nf_conntrack_ipv4       5008  9
nf_conntrack_ipv6       5120  3
nf_conntrack_rtcache    2512  0
nf_defrag_ipv4          1142  1 nf_conntrack_ipv4
nf_defrag_ipv6          9102  1 nf_conntrack_ipv6
nf_flow_table          12732  2 xt_FLOWOFFLOAD,nf_flow_table_hw
nf_flow_table_hw        2064  1
nf_log_common           2895  2 nf_log_ipv4,nf_log_ipv6
nf_log_ipv4             3312  0
nf_log_ipv6             3440  0
nf_nat                 10140  4 xt_nat,nf_nat_redirect,nf_nat_masquerade_ipv4,nf_nat_ipv4
nf_nat_ipv4             4017  1 iptable_nat
nf_nat_masquerade_ipv4    1596  1 ipt_MASQUERADE
nf_nat_redirect         1211  1 xt_REDIRECT
nf_reject_ipv4          2275  1 ipt_REJECT
nf_reject_ipv6          2696  1 ip6t_REJECT
nls_base                5056  1 usbcore
ohci_hcd               22303  1 ohci_platform
ohci_platform           4016  0
ppp_async               6256  0
ppp_generic            21570  3 pppoe,ppp_async,pppox
pppoe                   8112  0
pppox                   1386  1 pppoe
rt2800lib              88047  3 rt2800soc,rt2800pci,rt2800mmio
rt2800mmio              6057  2 rt2800soc,rt2800pci
rt2800pci               3616  0
rt2800soc               2464  0
rt2x00lib              34816  7 rt2800soc,rt2800pci,rt2800mmio,rt2800lib,rt2x00soc,rt2x00pci,rt2x00mmio
rt2x00mmio              2384  3 rt2800soc,rt2800pci,rt2800mmio
rt2x00pci               1682  1 rt2800pci
rt2x00soc               1234  1 rt2800soc
slhc                    4411  1 ppp_generic
usb_common              2519  1 usbcore
usbcore               126065  4 ohci_platform,ohci_hcd,ehci_platform,ehci_hcd
x_tables               13453 24 ipt_REJECT,ipt_MASQUERADE,xt_time,xt_tcpudp,xt_state,xt_nat,xt_multiport,xt_mark,xt_mac,xt_limit,xt_conntrack,xt_comment,xt_TCPMSS,xt_REDIRECT,xt_LOG,xt_FLOWOFFLOAD,xt_CT,iptable_mangle,iptable_filter,ip_tables,ip6t_REJECT,ip6table_mangle,ip6table_filter,ip6_tables
xt_CT                   2576  0
xt_FLOWOFFLOAD          2432  0
xt_LOG                   816  0
xt_REDIRECT              752  0
xt_TCPMSS               2768  0
xt_comment               528 95
xt_conntrack            2256 10
xt_limit                1040 20
xt_mac                   656  0
xt_mark                  720  0
xt_multiport            1264  0
xt_nat                  1584  0
xt_state                 752  0
xt_tcpudp               1808  8
xt_time                 1648  0
root@OpenWrt:~# swconfig
swconfig list
swconfig dev <dev> [port <port>|vlan <vlan>] (help|set <key> <value>|get <key>|load <config>|show)
root@OpenWrt:/# swconfig list
root@OpenWrt:/# swconfig list
root@OpenWrt:/# [   50.360082] random: crng init done
Showing tasks 1 - 4 of 4 Page 1 of 1

Available keyboard shortcuts

Tasklist

Task Details

Task Editing