OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity High
  • Priority Very Low
  • Reported Version lede-17.01
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Qier LU - 05.07.2017

FS#886 - Newifi D1 ethernat ports freeze after boot with cable plugin

Newifi D1 is a router device with MT7621 inside, more detailed information can be found at WikiDevi.

I have LEDE 17.01.2 running on the device, but experienced a bug with ethernat port. The bug is easy to reproduce: just powner on or reboot the device with RJ45 cable plugin. You will find that the LED blinks when booting, but freezes after boot. The frozen status of LED is on(wan port), off(lan port), on(lan port) in my situation which have both 3 ports connected.

But every thing works fine if I power on/reboot the device first, then plugin the RJ45 cable.

I could not connect to the device via the ethernat when it is frozen, but can login via wireless network provided by the device. I have checked the network status with ifconfig, the RX counter of eth0, eth0.1 and eth0.2 shows 0 when TX counter seems OK if I ping someone. I checked the switch as well by command: swconfig dev mt7530 show , every thing shows 0 on each port, excepted for port 6. No error message on dmesg.

Some one mentioned it is switch chip driver bug: . But no further information can be find by google any more.


Available keyboard shortcuts


Task Details

Task Editing