You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
On The WebUI after Uploading the following Error message appears:
"This Operation is not allowed for remote management" (http://i.imgur.com/jNBOD2J.png).
The original TPlink Binary Firmware linked above finstalls fine. The Error Occours both with the recent and the Previous Version of the TPlink Firmware.
== did you try downgrade vendor firmware? ==
there are only two versions, i tried both, downgrade via webui works,
does not fix the lede installation issue
== are you accessing it over LAN or from outside (with remote access enabled)==
tried both lan (yellow) and wireless, not via wan port
gunme:
Model:
Archer C58 (EU) V1
http://imgur.com/a/KUxwS
Device Page:
https://lede-project.org/toh/hwdata/tp-link/tp-link_archer_c58_v1
Original Firmware Tested:
http://static.tp-link.com/Archer%20C58(EU)_V1_160803.zip
and
http://static.tp-link.com/Archer_C58(EU)_V1_160607_1472709573473t.zip
Lede Firmware:
https://downloads.lede-project.org/snapshots/targets/ar71xx/generic/lede-ar71xx-generic-archer-c58-v1-squashfs-factory.bin
Prolem Description(Short):
Firmware Fails to install both via WebUI and TFTP.
Problem Description (Long):
Following the instructions from: https://git.lede-project.org/?p=source.git;a=commit;h=b05c7193fd289ff697324caccf77adf9ffa76373
and using the firmware linked above, the firmware fails to install.
On The WebUI after Uploading the following Error message appears:
"This Operation is not allowed for remote management" (http://i.imgur.com/jNBOD2J.png).
The original TPlink Binary Firmware linked above finstalls fine. The Error Occours both with the recent and the Previous Version of the TPlink Firmware.
Using TFTP, the router downloads the lede firmware, but fails to install it (http://imgur.com/6959d25e-ffbe-438f-9fd1-69e81f664505). When it is done booting, the standard firmware is still running on the device.
regards
The text was updated successfully, but these errors were encountered: