We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
ahpaedai:
Device: TP-Link WR741ND v4 OS: LEDE 17.01.2, also tried compile trunk with ATH_USER_REGD=y
I tried set country via iw reg set TW and via /etc/config/wireless and reboot router - no matter, ath9k ignore this settings.
iw reg set TW
root@lede:~# iw reg get global country TW: DFS-FCC (2400 - 2483 @ 40), (N/A, 30), (N/A) (5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5470 - 5725 @ 160), (N/A, 23), (0 ms), DFS (5725 - 5850 @ 80), (N/A, 30), (N/A)
phy#0 country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A)
Look, phy#0 always "country US" and max TX 18 dBm root@lede:~# iw dev phy#0 Interface wlan0 ifindex 8 wdev 0x3 addr 10:fe:ed:xx:xx:xx ssid LEDE type AP channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz txpower 18.00 dBm
root@lede:~# iw dev phy#0 Interface wlan0 ifindex 8 wdev 0x3 addr 10:fe:ed:xx:xx:xx ssid LEDE type AP channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz txpower 18.00 dBm
The text was updated successfully, but these errors were encountered:
Can this be related to EEPROM hard-coded values? How I can check it?
Sorry, something went wrong.
<deleted, wrong comment>
clyang:
I'm having the same issue on WR940N V4
luke-jr:
Same problem on WZR-600DHP
It worked up to 27 dBm with OpenWrt AA.
theboatdoctor:
fixed on WR940N V5
No branches or pull requests
ahpaedai:
Device: TP-Link WR741ND v4
OS: LEDE 17.01.2, also tried compile trunk with ATH_USER_REGD=y
I tried set country via
iw reg set TW
and via /etc/config/wireless and reboot router - no matter, ath9k ignore this settings.root@lede:~# iw reg get global country TW: DFS-FCC (2400 - 2483 @ 40), (N/A, 30), (N/A) (5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5470 - 5725 @ 160), (N/A, 23), (0 ms), DFS (5725 - 5850 @ 80), (N/A, 30), (N/A)
phy#0
country US: DFS-FCC
(2402 - 2472 @ 40), (N/A, 30), (N/A)
(5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
(5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
(5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS
(5735 - 5835 @ 80), (N/A, 30), (N/A)
(57240 - 63720 @ 2160), (N/A, 40), (N/A)
Look, phy#0 always "country US" and max TX 18 dBm
root@lede:~# iw dev
phy#0
Interface wlan0
ifindex 8
wdev 0x3
addr 10:fe:ed:xx:xx:xx
ssid LEDE
type AP
channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz
txpower 18.00 dBm
The text was updated successfully, but these errors were encountered: