You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
A nice feature for LEDE would be ability to limit what channels are used for when setting an interface up for "auto" channel selection.
For example, on 2.4 GHz, while channels 1-11 are often available, it's better to just use 1, 6, and 11. But for "auto" mode, the router will still sometimes pick one of the in between channels. If there was some sort of checklist where you could pick only those channels you want the algorithm to use, it would allow finer grained control over the process.
It would be trickier for the GHz band though, since there are often different power limits associated with the different bands.
The text was updated successfully, but these errors were encountered:
That feature is already available through the uci config through the option channels , just check :
[[http://example.com|External Linkhttps://openwrt.org/docs/guide-user/network/wifi/basic]]
What you can ask for is luci integration but that issue should be open in the LuCi Github page.
jon.grossart:
A nice feature for LEDE would be ability to limit what channels are used for when setting an interface up for "auto" channel selection.
For example, on 2.4 GHz, while channels 1-11 are often available, it's better to just use 1, 6, and 11. But for "auto" mode, the router will still sometimes pick one of the in between channels. If there was some sort of checklist where you could pick only those channels you want the algorithm to use, it would allow finer grained control over the process.
It would be trickier for the GHz band though, since there are often different power limits associated with the different bands.
The text was updated successfully, but these errors were encountered: