You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I tried it on GL-AR150, but it should reproduce on any device w/ USB
Software versions of LEDE release, packages, etc.
LEDE 17.01.1
gpsd 3.16-1
Steps to reproduce
If you have a device with "Garmin USB binary" (eg : eTrex), then
gpsd -n -N -G -D 4 /dev/ttyUSB0
... should show data once a second.
From my reading of the code, even without a Garmin device, "-D 4" debug level should show a message of "Probing Garmin USB binary driver...\n"
From my reading of the code, it looks a a build problem. 2 "defines" need to be made :
NON_NMEA0183_ENABLE
HAVE_LIBUSB
FYI, there is a similiar bug for "NMEA2000" : If you do "gpsd -h", you should see "NMEA2000" on the list of "drivers". I can file a separate bug for this if you want.
Thanks !
The text was updated successfully, but these errors were encountered:
marconi:
Supply the following if possible:
I tried it on GL-AR150, but it should reproduce on any device w/ USB
LEDE 17.01.1
gpsd 3.16-1
If you have a device with "Garmin USB binary" (eg : eTrex), then
gpsd -n -N -G -D 4 /dev/ttyUSB0
... should show data once a second.
From my reading of the code, even without a Garmin device, "-D 4" debug level should show a message of "Probing Garmin USB binary driver...\n"
From my reading of the code, it looks a a build problem. 2 "defines" need to be made :
NON_NMEA0183_ENABLE
HAVE_LIBUSB
FYI, there is a similiar bug for "NMEA2000" : If you do "gpsd -h", you should see "NMEA2000" on the list of "drivers". I can file a separate bug for this if you want.
Thanks !
The text was updated successfully, but these errors were encountered: