You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
no noticeable difference in LED between failsafe/actual moment of soft reboot//when router is up
I had to failsafe the WRT54G multiple times due to other initial config errors (attempting to bridge wlan0 to LAN, which was possible in another OS), I could only identify failsafe by Pinging it then SSHing quickly
The method I described to identify failsafe is not mentioned in documentation
The text was updated successfully, but these errors were encountered:
Your bug report seems to be related to FS#790, FS#792 and FS#793, for which fixes have been committed to the LEDE development version as follows:
The DMZ LED is now used as the status indicator. The power LED might still be flashing but you can safely ignore it. Failsafe mode can be entered using the Reset button, and networking in failsafe mode works. I tested these fixes on a WRT54GS.
If you can try a LEDE snapshot on your devices, please check if it fixes the issue you reported here.
lleachii:
The text was updated successfully, but these errors were encountered: