New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
FS#727 - USB not working on TL-WDR4900 v1.x #5707
Labels
Comments
adrianschmutzler: Can this be reproduced with a recent version of OpenWrt? |
stale and I can't reproduce it anymore @hauke
The largest dmesg timevalue is 145336.082474 for comparison to 986.577885 from above |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
kokaracha:
USB ports are empty but hub is deteched periodically.
dmesg | grep -i usb
[ 0.029483] usbcore: registered new interface driver usbfs
[ 0.029537] usbcore: registered new interface driver hub
[ 0.029580] usbcore: registered new device driver usb
[ 2.075954] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.104850] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[ 2.138024] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[ 2.144048] hub 1-0:1.0: USB hub found
[ 2.535450] usb 1-1: new high-speed USB device number 2 using fsl-ehci
[ 2.728493] hub 1-1:1.0: USB hub found
[ 3.511480] usb 1-1: USB disconnect, device number 2
[ 3.814034] usb 1-1: new high-speed USB device number 3 using fsl-ehci
[ 3.952117] hub 1-1:1.0: USB hub found
[ 4.484403] usb 1-1: USB disconnect, device number 3
[ 4.730021] usb 1-1: new high-speed USB device number 4 using fsl-ehci
[ 4.868111] hub 1-1:1.0: USB hub found
[ 5.265649] usb 1-1: USB disconnect, device number 4
[ 5.510021] usb 1-1: new high-speed USB device number 5 using fsl-ehci
[ 6.098025] usb 1-1: device not accepting address 5, error -71
[ 6.398018] usb 1-1: new high-speed USB device number 7 using fsl-ehci
[ 986.577885] usb 1-1: USB disconnect, device number 124
[ 986.821924] usb 1-1: new high-speed USB device number 125 using fsl-ehci
[ 986.960029] hub 1-1:1.0: USB hub found
[ 991.933221] usb 1-1: USB disconnect, device number 125
[ 992.177825] usb 1-1: new high-speed USB device number 126 using fsl-ehci
[ 992.315980] hub 1-1:1.0: USB hub found
[ 1001.763764] usb 1-1: USB disconnect, device number 126
[ 1002.009660] usb 1-1: new high-speed USB device number 127 using fsl-ehci
[ 1002.159774] hub 1-1:1.0: USB hub found
[ 1006.033730] usb 1-1: USB disconnect, device number 127
[ 1006.281597] usb 1-1: new high-speed USB device number 2 using fsl-ehci
[ 1006.419736] hub 1-1:1.0: USB hub found
[ 1009.824073] usb 1-1: USB disconnect, device number 2
[ 1010.076110] usb 1-1: new high-speed USB device number 3 using fsl-ehci
cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 4.04
S: Manufacturer=Linux 4.4.61 ehci_hcd
S: Product=Freescale On-Chip EHCI Host Controller
S: SerialNumber=fsl-ehci.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 88 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0608 Rev=85.36
S: Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
lsusb -v
Bus 001 Device 090: ID 05e3:0608 Genesys Logic, Inc. Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0608 Hub
bcdDevice 85.36
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e9
Per-port power switching
Per-port overcurrent protection
TT think time 32 FS bits
Port indicators
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.04
iManufacturer 3 Linux 4.4.61 ehci_hcd
iProduct 2 Freescale On-Chip EHCI Host Controller
iSerial 1 fsl-ehci.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 1
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Device Status: 0x0001
Self Powered
The text was updated successfully, but these errors were encountered: