Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#717 - WRT3200ACM USB 3.0 Problem #5702

Open
openwrt-bot opened this issue Apr 19, 2017 · 0 comments
Open

FS#717 - WRT3200ACM USB 3.0 Problem #5702

openwrt-bot opened this issue Apr 19, 2017 · 0 comments
Labels

Comments

@openwrt-bot
Copy link

garfo77:

I can´t get my Seagate Expansion Portable 1TB STEA1000400 USB3.0 drive to be be recognized on the USB 3.0 port of the router after a reboot or cold start on WRT3200 but if i remove and hotplug the drive, it is automatically detected and can be mounted.
It happens with images from Openwrt 15.05.1, LEDE 17.01.1 and many snapshots from both projects that i have installed. I have no problem with another usb2.0 drive from Samsung that is installed in another USB2.0 port.

After Cold START or REBOOT
root@LEDE:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.20 (ag33e33@ubuntu) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3963-7ae58be) ) #0 SMP Wed Apr 12 16:12:18 2017
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys WRT3200ACM
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c0646900, node_mem_map dfbf9000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 13 pages/cpu @dfbce000 s22732 r8192 d22324 u53248
[ 0.000000] pcpu-alloc: s22732 r8192 d22324 u53248 alloc=134096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,128K(u_env),256K(s_env),256K@8064K(devinfo),1920K@8320K(sysdiag),80m@10m(kernel),74m@16m(rootfs),80m@90m(alt_kernel),74m@96m(alt_rootfs),160m@10m(ubifs),-@170m(syscfg)
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512848K/524288K available (4545K kernel code, 180K rwdata, 1244K rodata, 280K init, 310K bss, 11440K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0478918 (4547 kB)
.init : 0xc05d4000 - 0xc061a000 ( 280 kB)
.data : 0xc061a000 - 0xc0647200 ( 181 kB)
.bss : 0xc0647200 - 0xc0694a00 ( 310 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000000] Selected CPU frequency (16) unsupported
[ 0.000000] Switching to timer-based delay loop, resolution 40ns
[ 0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
[ 0.000008] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000114] Calibrating local timer... 933.22MHz.
[ 0.060032] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[ 0.060037] pid_max: default: 32768 minimum: 301
[ 0.060076] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060079] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060274] CPU: Testing write buffer coherency: ok
[ 0.060365] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.060376] Setting up static identity map for 0x8280 - 0x82d8
[ 0.060434] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.060494] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.060904] Booting CPU 1
[ 0.061041] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.061070] Brought up 2 CPUs
[ 0.061075] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[ 0.061078] CPU: All CPU(s) started in SVC mode.
[ 0.062739] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.062790] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.062796] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.062831] pinctrl core: initialized pinctrl subsystem
[ 0.063142] NET: Registered protocol family 16
[ 0.063575] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.090041] cpuidle: using governor ladder
[ 0.090171] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.090177] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.120467] reg-fixed-voltage xhci0-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/xhci0-vbus-pins, deferring probe
[ 0.120607] SCSI subsystem initialized
[ 0.120687] libata version 3.00 loaded.
[ 0.120790] usbcore: registered new interface driver usbfs
[ 0.120815] usbcore: registered new interface driver hub
[ 0.120835] usbcore: registered new device driver usb
[ 0.121329] clocksource: Switched to clocksource armada_370_xp_clocksource
[ 0.121647] NET: Registered protocol family 2
[ 0.121869] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.121890] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.121920] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.121941] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.121952] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.122009] NET: Registered protocol family 1
[ 0.122021] PCI: CLS 0 bytes, default 64
[ 0.122803] Crashlog allocated RAM at address 0x3f00000
[ 0.122877] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.124945] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.124953] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.125699] io scheduler noop registered
[ 0.125703] io scheduler deadline registered (default)
[ 0.126071] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.126671] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[ 0.126679] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 0.126683] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.126687] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.126701] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[ 0.126784] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[ 0.126859] PCI: bus0: Fast back to back transfers disabled
[ 0.126864] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.126870] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.126918] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000
[ 0.126933] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref]
[ 0.126943] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref]
[ 0.127002] pci 0000:01:00.0: supports D1 D2
[ 0.127005] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.127068] PCI: bus1: Fast back to back transfers disabled
[ 0.127073] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.127132] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000
[ 0.127151] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref]
[ 0.127162] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref]
[ 0.127244] pci 0000:02:00.0: supports D1 D2
[ 0.127246] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.127310] PCI: bus2: Fast back to back transfers disabled
[ 0.127315] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.127384] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
[ 0.127390] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
[ 0.127396] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
[ 0.127405] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[ 0.127413] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.127418] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe02fffff]
[ 0.127425] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[ 0.127434] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
[ 0.127443] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.127448] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe06fffff]
[ 0.127646] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.181754] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.181840] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.241717] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.241857] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.242621] console [ttyS0] disabled
[ 0.262683] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A
[ 0.983287] console [ttyS0] enabled
[ 0.988691] loop: module loaded
[ 0.992090] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 1.001176] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.010274] scsi host0: ahci-mvebu
[ 1.013847] scsi host1: ahci-mvebu
[ 1.017348] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[ 1.025306] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[ 1.033594] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[ 1.041369] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[ 1.047747] nand: AMD/Spansion S34ML02G2
[ 1.051690] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 1.059379] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
[ 1.066556] Bad block table found at page 131008, version 0x01
[ 1.072752] Bad block table found at page 130944, version 0x01
[ 1.078863] 11 ofpart partitions found on MTD device pxa3xx_nand-0
[ 1.085074] Creating 11 MTD partitions on "pxa3xx_nand-0":
[ 1.090582] 0x000000000000-0x000000200000 : "u-boot"
[ 1.095830] 0x000000200000-0x000000220000 : "u_env"
[ 1.100951] 0x000000220000-0x000000260000 : "s_env"
[ 1.106089] 0x0000007e0000-0x000000820000 : "devinfo"
[ 1.111433] 0x000000820000-0x000000a00000 : "sysdiag"
[ 1.116797] 0x000000a00000-0x000005a00000 : "kernel1"
[ 1.122301] 0x000001000000-0x000005a00000 : "ubi"
[ 1.127404] 0x000005a00000-0x00000aa00000 : "kernel2"
[ 1.132905] 0x000006000000-0x00000aa00000 : "rootfs2"
[ 1.138362] 0x00000aa00000-0x000010000000 : "syscfg"
[ 1.143774] 0x000000260000-0x000000820000 : "unused_area"
[ 1.149701] libphy: Fixed MDIO Bus: probed
[ 1.154064] libphy: orion_mdio_bus: probed
[ 1.158297] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.166962] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:b9:ea:c0
[ 1.175959] mvneta f1034000.ethernet eth1: Using random mac address a2:8d:5e:6d:ee:98
[ 1.183881] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.190435] ehci-pci: EHCI PCI platform driver
[ 1.194928] ehci-platform: EHCI generic platform driver
[ 1.200245] ehci-orion: EHCI orion driver
[ 1.204336] orion-ehci f1058000.usb: EHCI Host Controller
[ 1.209765] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 1.217412] orion-ehci f1058000.usb: irq 37, io mem 0xf1058000
[ 1.251329] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 1.257480] hub 1-0:1.0: USB hub found
[ 1.261254] hub 1-0:1.0: 1 port detected
[ 1.265551] usbcore: registered new interface driver usb-storage
[ 1.271723] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[ 1.279341] i2c /dev entries driver
[ 1.294252] orion_wdt: Initial timeout 171 sec
[ 1.298933] sdhci: Secure Digital Host Controller Interface driver
[ 1.305146] sdhci: Copyright(c) Pierre Ossman
[ 1.362546] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.367991] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.371354] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[ 1.371428] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.377154] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 1.377556] NET: Registered protocol family 10
[ 1.391590] NET: Registered protocol family 17
[ 1.391604] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.391605] 8021q: 802.1Q VLAN Support v1.8
[ 1.391661] Registering SWP/SWPB emulation handler
[ 1.392791] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.392803] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[ 1.392861] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[ 1.392881] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[ 1.393134] hub 2-0:1.0: USB hub found
[ 1.393160] hub 2-0:1.0: 1 port detected
[ 1.393247] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.393253] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[ 1.393292] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.393478] hub 3-0:1.0: USB hub found
[ 1.393501] hub 3-0:1.0: 1 port detected
[ 1.393820] UBI: auto-attach mtd6
[ 1.393824] ubi0: attaching mtd6
[ 1.397930] random: fast init done
[ 1.401551] mmc0: new high speed SDIO card at address 0001
[ 1.593092] ubi0: scanning is finished
[ 1.601334] ubi0: attached mtd6 (name "ubi", size 74 MiB)
[ 1.606756] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.613664] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.620479] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.627475] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0
[ 1.633508] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 1.640759] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1419003487
[ 1.649932] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 40
[ 1.659197] ubi0: background thread "ubi_bgt0d" started, PID 668
[ 1.659208] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 1.659643] block ubiblock0_0: created from ubi0:0(rootfs)
[ 1.659645] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 1.659829] mvsw61xx 10.mvsw61xx: Found MV88E6352 at f1072004.mdio-mi:10
[ 1.659832] mvsw61xx 10.mvsw61xx: Using direct addressing
[ 1.671972] armada38x-rtc f10a3800.rtc: setting system clock to 2101-11-05 12:45:50 UTC (4160637950)
[ 1.705850] Waiting 1 sec before mounting root device...
[ 1.852932] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 1.859142] scsi host2: usb-storage 1-1:1.0
[ 2.722974] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.730260] Freeing unused kernel memory: 280K (c05d4000 - c061a000)
[ 2.736655] This architecture does not have kernel memory protection.
[ 2.855724] init: Console is alive
[ 2.859203] init: - watchdog -
[ 2.924338] scsi 2:0:0:0: Direct-Access Samsung S2 Portable PQ: 0 ANSI: 2 CCS
[ 3.111498] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 3.151660] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.159777] sd 2:0:0:0: [sda] Write Protect is off
[ 3.164597] sd 2:0:0:0: [sda] Mode Sense: 28 00 00 00
[ 3.165152] sd 2:0:0:0: [sda] No Caching mode page found
[ 3.170490] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 3.179038] sda: sda1
[ 3.183653] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.188738] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.195221] ohci-platform: OHCI generic platform driver
[ 3.200902] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.207556] ohci-pci: OHCI PCI platform driver
[ 3.212156] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.228593] init: - preinit -
[ 3.422394] mvneta f1070000.ethernet tmp0: renamed from eth0
[ 3.462586] mvneta f1034000.ethernet eth0: renamed from eth1
[ 3.512510] mvneta f1070000.ethernet eth1: renamed from tmp0
[ 3.833291] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[ 3.840562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.846607] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 3.854578] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.909798] mount_root: loading kmods from internal overlay
[ 5.921475] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 5.929503] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 6.328768] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 806
[ 6.357145] UBIFS (ubi0:1): recovery needed
[ 6.403932] random: crng init done
[ 6.431762] UBIFS (ubi0:1): recovery completed
[ 6.436249] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 6.444117] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 6.454076] UBIFS (ubi0:1): FS size: 61329408 bytes (58 MiB, 483 LEBs), journal size 3047424 bytes (2 MiB, 24 LEBs)
[ 6.464556] UBIFS (ubi0:1): reserved for root: 2896739 bytes (2828 KiB)
[ 6.471198] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DEE50754-EFFE-4990-A7A6-C97266C9BEF0, small LPT model
[ 6.483473] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 6.493882] block: extroot: not configured
[ 6.531369] UBIFS (ubi0:1): un-mount UBI device 0
[ 6.536097] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 6.544028] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 809
[ 6.591527] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 6.599392] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 6.609356] UBIFS (ubi0:1): FS size: 61329408 bytes (58 MiB, 483 LEBs), journal size 3047424 bytes (2 MiB, 24 LEBs)
[ 6.619838] UBIFS (ubi0:1): reserved for root: 2896739 bytes (2828 KiB)
[ 6.626483] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DEE50754-EFFE-4990-A7A6-C97266C9BEF0, small LPT model
[ 6.641627] mount_root: loading kmods from internal overlay
[ 6.652909] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 6.670201] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 7.078279] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 7.086484] block: extroot: not configured
[ 7.132013] mount_root: switching to ubifs overlay
[ 7.176201] ubi1: attaching mtd9
[ 7.407547] ubi1: scanning is finished
[ 7.415742] ubi1: attached mtd9 (name "syscfg", size 86 MiB)
[ 7.421435] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 7.428338] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 7.435155] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 7.442148] ubi1: good PEBs: 680, bad PEBs: 8, corrupted PEBs: 0
[ 7.448177] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 7.455430] ubi1: max/mean erase counter: 6/4, WL threshold: 4096, image sequence number: 1148089792
[ 7.464603] ubi1: available PEBs: 0, total reserved PEBs: 680, PEBs reserved for bad PEB handling: 32
[ 7.473869] ubi1: background thread "ubi_bgt1d" started, PID 824
[ 7.485213] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 828
[ 7.537764] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "syscfg"
[ 7.545202] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.555161] UBIFS (ubi1:0): FS size: 80375808 bytes (76 MiB, 633 LEBs), journal size 4063232 bytes (3 MiB, 32 LEBs)
[ 7.565642] UBIFS (ubi1:0): reserved for root: 3796347 bytes (3707 KiB)
[ 7.572287] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A5EAB2F8-92D3-4D0B-A69A-9F6CA9A608B3, small LPT model
[ 7.585463] urandom-seed: Seeding with /etc/urandom.seed
[ 7.684142] procd: - early -
[ 7.687055] procd: - watchdog -
[ 8.315049] procd: - ubus -
[ 8.371904] procd: - init -
[ 8.546612] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.557859] tun: Universal TUN/TAP device driver, 1.6
[ 8.562965] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 8.571391] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 8.580401] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.587876] cryptodev: driver 1.8 loaded.
[ 8.592340] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[ 8.600387] Backport generated by backports.git backports-20160324-13-g24da7d3c
[ 8.615059] <<Marvell 802.11ac Wireless Network Driver version 10.3.2.0-20170110>>
[ 8.622702] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 8.628443] ieee80211 phy0: priv->iobase0 = e0f80000
[ 8.628454] ieee80211 phy0: priv->iobase1 = e1200000
[ 8.628463] ieee80211 phy0: priv->pcmd_buf = ddf08000 priv->pphys_cmd_buf = 1df08000
[ 8.636458] ieee80211 phy0: fw download start
[ 8.699990] ieee80211 phy0: FwSize = 207660 downloaded Size = 207660 curr_iteration 65522
[ 12.431324] ieee80211 phy0: fw download complete
[ 12.431783] ieee80211 phy0: pcmd = ddf08000
[ 12.449817] ieee80211 phy0: firmware version: 0x7080004
[ 12.809338] ieee80211 phy0: firmware region code: 10
[ 12.851995] ieee80211 phy0: 2G disabled, 5G enabled
[ 12.856895] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[ 12.862298] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 12.868032] ieee80211 phy1: priv->iobase0 = e1380000
[ 12.868043] ieee80211 phy1: priv->iobase1 = e1600000
[ 12.868052] ieee80211 phy1: priv->pcmd_buf = dddf0000 priv->pphys_cmd_buf = 1ddf0000
[ 12.874418] ieee80211 phy1: fw download start
[ 12.939175] ieee80211 phy1: FwSize = 207660 downloaded Size = 207660 curr_iteration 65527
[ 14.327325] ieee80211 phy1: fw download complete
[ 14.327812] ieee80211 phy1: pcmd = dddf0000
[ 14.345344] ieee80211 phy1: firmware version: 0x7080004
[ 14.706323] ieee80211 phy1: firmware region code: 10
[ 14.750021] ieee80211 phy1: 2G enabled, 5G disabled
[ 14.754934] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[ 14.762803] u32 classifier
[ 14.765522] input device check on
[ 14.769196] Actions configured
[ 14.773037] Mirror/redirect action on
[ 14.778285] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 14.790080] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.799009] mwifiex: rx work enabled, cpus 2
[ 14.846998] usbcore: registered new interface driver ums-alauda
[ 14.853672] usbcore: registered new interface driver ums-cypress
[ 14.860218] usbcore: registered new interface driver ums-datafab
[ 14.866723] usbcore: registered new interface driver ums-freecom
[ 14.873187] usbcore: registered new interface driver ums-isd200
[ 14.879542] usbcore: registered new interface driver ums-jumpshot
[ 14.886112] usbcore: registered new interface driver ums-karma
[ 14.892282] usbcore: registered new interface driver ums-sddr09
[ 14.898499] usbcore: registered new interface driver ums-sddr55
[ 14.904752] usbcore: registered new interface driver ums-usbat
[ 14.917781] xt_time: kernel timezone is -0000
[ 14.925132] PPP generic driver version 2.4.2
[ 14.929843] NET: Registered protocol family 24
[ 14.935112] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 15.469997] mwifiex_sdio mmc0:0001:1: info: FW download over, size 391772 bytes
[ 15.831665] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[ 15.864262] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x242 error, result=0x2
[ 15.871261] mwifiex_sdio mmc0:0001:1: mwifiex_process_cmdresp: cmd 0x242 failed during initialization
[ 15.890625] mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.7.p5)
[ 15.898674] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.68.7.p5)
[ 16.052347] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[ 16.059309] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.065375] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 16.073372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.081683] br-lan: port 1(eth0.1) entered blocking state
[ 16.087106] br-lan: port 1(eth0.1) entered disabled state
[ 16.092675] device eth0.1 entered promiscuous mode
[ 16.097485] device eth0 entered promiscuous mode
[ 16.103227] br-lan: port 1(eth0.1) entered blocking state
[ 16.108650] br-lan: port 1(eth0.1) entered forwarding state
[ 16.122758] mvneta f1070000.ethernet eth1: configuring for fixed link mode
[ 16.130044] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 16.136169] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 16.144170] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 16.342477] pppoe-wan: renamed from ppp0
[ 16.900336] ieee80211 phy1: change: 0xffffffff
[ 17.006509] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 17.137396] ieee80211 phy0: change: 0xffffffff
[ 17.271596] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.277594] br-lan: port 2(wlan1) entered blocking state
[ 17.282955] br-lan: port 2(wlan1) entered disabled state
[ 17.288408] device wlan1 entered promiscuous mode
[ 17.293166] br-lan: port 2(wlan1) entered blocking state
[ 17.298502] br-lan: port 2(wlan1) entered forwarding state
[ 17.304255] br-lan: port 2(wlan1) entered disabled state
[ 17.309734] br-lan: port 3(wlan0) entered blocking state
[ 17.315091] br-lan: port 3(wlan0) entered disabled state
[ 17.320543] device wlan0 entered promiscuous mode
[ 17.327109] ieee80211 phy0: change: 0x100
[ 17.344423] ieee80211 phy0: change: 0x40
[ 17.380440] ieee80211 phy1: change: 0x100
[ 17.392530] ieee80211 phy1: change: 0x42
[ 17.593821] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 17.600257] br-lan: port 2(wlan1) entered blocking state
[ 17.605603] br-lan: port 2(wlan1) entered forwarding state
[ 17.611269] ieee80211 phy0: change: 0x40
[ 17.671185] ieee80211 phy1: change: 0x20
[ 17.861365] ieee80211 phy0: change: 0x40
[ 17.993370] ieee80211 phy0: change: 0x100
[ 18.060535] ieee80211 phy0: change: 0x100
[ 18.073629] ieee80211 phy0: change: 0x42
[ 18.341340] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 18.347812] br-lan: port 3(wlan0) entered blocking state
[ 18.353170] br-lan: port 3(wlan0) entered forwarding state

root@LEDE:~# lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04e8:1f05 Samsung Electronics Co., Ltd S2 Portable [JMicron] (500GB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

After i remove the cable and hotplug i get this additional lines in DMESG:
#
[ 527.103849] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 527.134880] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 527.141155] scsi host3: usb-storage 3-1:1.0
[ 528.154087] scsi 3:0:0:0: Direct-Access Seagate Expansion 1805 PQ: 0 ANSI: 6
[ 529.455313] sd 3:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[ 529.463210] sd 3:0:0:0: [sdb] Write Protect is off
[ 529.468032] sd 3:0:0:0: [sdb] Mode Sense: 33 00 00 08
[ 529.473381] sd 3:0:0:0: [sdb] No Caching mode page found
[ 529.478724] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 529.499962] sdb: sdb1 sdb2
[ 529.503903] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 612.132851] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts:

root@LEDE:~# lsusb
Bus 003 Device 002: ID 0bc2:231b Seagate RSS LLC
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04e8:1f05 Samsung Electronics Co., Ltd S2 Portable [JMicron] (500GB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant