Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

FS#697 - LEDE tl-wdr3320-v2 No 2.4GHz #6334

Closed
openwrt-bot opened this issue Apr 10, 2017 · 10 comments
Closed

FS#697 - LEDE tl-wdr3320-v2 No 2.4GHz #6334

openwrt-bot opened this issue Apr 10, 2017 · 10 comments
Labels
flyspray

Comments

@openwrt-bot
Copy link

kos:

ar9344+ar9287

this：
https://downloads.lede-project.org/releases/17.01.0/targets/ar71xx/generic/lede-17.01.0-r3205-59508e3-ar71xx-generic-tl-wdr3320-v2-squashfs-sysupgrade.bin
No 2.4GHz
@openwrt-bot
Copy link
Author

mkresin:

I'm sorry to say, but you bugreport doesn't contain any info that would allow us to debug the issue.

Please describe your problem. "no 2.4Ghz" could mean anything.

Please provide some logfiles:

  • output of 'dmesg' and/or 'logread'
  • the file /etc/config/wireless

Does it work with the [[https://downloads.lede-project.org/snapshots/targets/ar71xx/generic/lede-ar71xx-generic-tl-wdr3320-v2-squashfs-sysupgrade.bin|development version of LEDE]]?

@openwrt-bot
Copy link
Author

kos:

Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 0.000000] Linux version 4.4.50 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3101-bce140e) ) #0 Mon Feb 20 17:13:44 2017
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.000000] MyLoader: sysp=fbaff7f7, boardp=cbcffffb, parts=dffbcff7
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] SoC: Atheros AR9344 rev 3
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Determined physical RAM map:
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] memory: 04000000 @ 00000000 (usable)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Mon Feb 20 17:13:48 2017 kern.warn kernel: [ 0.000000] No valid device tree found, continuing without
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Zone ranges:
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Movable zone start for each node
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Early memory node ranges
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.000000] On node 0 totalpages: 16384
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 803d04d0, node_mem_map 81000000
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.000000] Normal zone: 128 pages used for memmap
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
Mon Feb 20 17:13:48 2017 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Mon Feb 20 17:13:48 2017 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 0.000000] Kernel command line: board=TL-WDR3320-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Memory: 60352K/65536K available (3071K kernel code, 165K rwdata, 412K rodata, 312K init, 205K bss, 5184K reserved, 0K cma-reserved)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] NR_IRQS:51
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.000MHz
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.008702] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.081675] pid_max: default: 32768 minimum: 301
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.086956] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.094345] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.104785] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.116967] NET: Registered protocol family 16
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.123323] MIPS: machine is TP-LINK TL-WDR3320 v2
Mon Feb 20 17:13:48 2017 kern.warn kernel: [ 0.132077] registering PCI controller with io_map_base unset
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.582658] PCI host bridge to bus 0000:00
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.587245] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.594959] pci_bus 0000:00: root bus resource [io 0x0000]
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.601165] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.608745] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.617619] pci 0000:00:00.0: [168c:002e] type 00 class 0x028000
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.617653] pci 0000:00:00.0: fixup device configuration
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.625328] pci 0000:00:00.0: reg 0x10: [mem 0x10000000-0x1000ffff 64bit]
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.625447] pci 0000:00:00.0: supports D1
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.625464] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.625708] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.625746] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.633951] pci 0000:00:00.0: using irq 40 for pin 1
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.640249] clocksource: Switched to clocksource MIPS
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.647118] NET: Registered protocol family 2
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.652975] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.660813] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.667909] TCP: Hash tables configured (established 1024 bind 1024)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.675106] UDP hash table entries: 256 (order: 0, 4096 bytes)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.681671] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.688921] NET: Registered protocol family 1
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 0.693862] PCI: CLS 0 bytes, default 32
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.698606] futex hash table entries: 256 (order: -1, 3072 bytes)
Mon Feb 20 17:13:48 2017 kern.warn kernel: [ 0.705537] Crashlog allocated RAM at address 0x3f00000
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.726879] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.733433] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.747038] io scheduler noop registered
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.751462] io scheduler deadline registered (default)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.757425] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.767475] console [ttyS0] disabled
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.791562] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.801189] console [ttyS0] enabled
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.808596] bootconsole [early0] disabled
Mon Feb 20 17:13:48 2017 kern.warn kernel: [ 0.822433] m25p80 spi0.0: found w25q128, expected m25p80
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.827931] m25p80 spi0.0: w25q128 (16384 Kbytes)
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 0.833971] 5 tp-link partitions found on MTD device spi0.0
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 0.839636] Creating 5 MTD partitions on "spi0.0":
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 0.844548] 0x000000000000-0x000000020000 : "u-boot"
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 0.851174] 0x000000020000-0x000000152e54 : "kernel"
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 0.857953] 0x000000152e54-0x000000ff0000 : "rootfs"
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 0.864774] mtd: device 2 (rootfs) set to be root filesystem
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 0.870622] 1 squashfs-split partitions found on MTD device rootfs
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 0.876902] 0x000000380000-0x000000ff0000 : "rootfs_data"
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 0.884146] 0x000000ff0000-0x000001000000 : "art"
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 0.890775] 0x000000020000-0x000000ff0000 : "firmware"
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 0.914672] libphy: ag71xx_mdio: probed
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 1.502138] ag71xx-mdio.1: Found an AR934X built-in switch
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 1.544462] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 2.142334] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 2.152339] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 2.160432] NET: Registered protocol family 10
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 2.169218] NET: Registered protocol family 17
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 2.173865] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 2.186792] 8021q: 802.1Q VLAN Support v1.8
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 2.197198] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 2.206266] Freeing unused kernel memory: 312K (803f2000 - 80440000)
Mon Feb 20 17:13:48 2017 user.info kernel: [ 3.346650] init: Console is alive
Mon Feb 20 17:13:48 2017 user.info kernel: [ 3.350415] init: - watchdog -
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 4.333526] usbcore: registered new interface driver usbfs
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 4.339199] usbcore: registered new interface driver hub
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 4.344762] usbcore: registered new device driver usb
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 4.355501] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 4.363721] ehci-platform: EHCI generic platform driver
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 4.369130] ehci-platform ehci-platform: EHCI Host Controller
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 4.375057] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 4.385197] ehci-platform ehci-platform: TX-TX IDP fix enabled
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 4.391150] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 4.410296] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 4.417589] hub 1-0:1.0: USB hub found
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 4.421863] hub 1-0:1.0: 1 port detected
Mon Feb 20 17:13:48 2017 user.info kernel: [ 4.432001] init: - preinit -
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 5.135342] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 5.163199] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
Mon Feb 20 17:13:48 2017 user.notice kernel: [ 7.291827] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
Mon Feb 20 17:13:48 2017 user.warn kernel: [ 7.303043] urandom-seed: Seed file not found (/etc/urandom.seed)
Mon Feb 20 17:13:48 2017 user.info kernel: [ 7.525619] procd: - early -
Mon Feb 20 17:13:48 2017 user.info kernel: [ 7.528658] procd: - watchdog -
Mon Feb 20 17:13:48 2017 user.info kernel: [ 8.165792] procd: - ubus -
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 8.270763] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 8.280836] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 8.290545] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 8.299701] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 8.309270] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 8.318504] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 8.327847] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 8.337226] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
Mon Feb 20 17:13:48 2017 user.info kernel: [ 8.346775] procd: - init -
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 8.749190] ip6_tables: (C) 2000-2006 Netfilter Core Team
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 8.768030] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 8.775777] Backport generated by backports.git backports-20160324-9-g0e38f5c
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 8.786380] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 8.800813] nf_conntrack version 0.5.0 (947 buckets, 3788 max)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 8.842040] xt_time: kernel timezone is -0000
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 8.908868] PPP generic driver version 2.4.2
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 8.915933] NET: Registered protocol family 24
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 8.964593] ath: EEPROM regdomain: 0x0
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 8.964614] ath: EEPROM indicates default country code should be used
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 8.964624] ath: doing EEPROM country->regdmn map search
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 8.964646] ath: country maps to regdmn code: 0x3a
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 8.964657] ath: Country alpha2 being used: US
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 8.964667] ath: Regpair used: 0x3a
Mon Feb 20 17:13:48 2017 kern.debug kernel: [ 8.977791] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 8.983397] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
Mon Feb 20 17:13:48 2017 kern.warn kernel: [ 8.990376] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Mon Feb 20 17:13:48 2017 kern.info kernel: [ 9.001252] ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
Mon Feb 20 17:13:48 2017 kern.err kernel: [ 9.008420] ath: phy1: Bad EEPROM VER 0x0000 or REV 0x04e0
Mon Feb 20 17:13:48 2017 kern.err kernel: [ 9.013999] ath: phy1: Unable to initialize hardware; initialization status: -22
Mon Feb 20 17:13:48 2017 kern.err kernel: [ 9.021517] ath9k 0000:00:00.0: Failed to initialize device
Mon Feb 20 17:13:48 2017 kern.warn kernel: [ 9.027226] ath9k: probe of 0000:00:00.0 failed with error -22
Mon Feb 20 17:13:48 2017 kern.notice kernel: [ 10.343902] random: jshn: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Mon Feb 20 17:13:50 2017 user.notice : Added device handler type: 8021ad
Mon Feb 20 17:13:50 2017 user.notice : Added device handler type: 8021q
Mon Feb 20 17:13:50 2017 user.notice : Added device handler type: macvlan
Mon Feb 20 17:13:50 2017 user.notice : Added device handler type: bridge
Mon Feb 20 17:13:50 2017 user.notice : Added device handler type: Network device
Mon Feb 20 17:13:50 2017 user.notice : Added device handler type: tunnel
Mon Feb 20 17:13:50 2017 user.notice : 'radio0' is disabled
Mon Feb 20 17:13:50 2017 user.notice : 'radio0' is disabled
Mon Feb 20 17:13:52 2017 daemon.err mount_root: no jffs2 marker found
Mon Feb 20 17:13:52 2017 kern.warn kernel: [ 17.510662] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
Mon Feb 20 17:13:52 2017 kern.warn kernel: [ 17.517684] jffs2_build_filesystem(): unlocking the mtd device... done.
Mon Feb 20 17:13:56 2017 kern.warn kernel: [ 17.524468] jffs2_build_filesystem(): erasing all blocks after the end marker...
Mon Feb 20 17:13:56 2017 kern.info kernel: [ 21.478933] device eth0 entered promiscuous mode
Mon Feb 20 17:13:56 2017 daemon.notice netifd: Interface 'lan' is enabled
Mon Feb 20 17:13:56 2017 kern.info kernel: [ 21.502377] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Mon Feb 20 17:13:56 2017 daemon.notice netifd: Interface 'lan' is setting up now
Mon Feb 20 17:13:56 2017 daemon.notice netifd: Interface 'lan' is now up
Mon Feb 20 17:13:57 2017 daemon.notice netifd: Interface 'loopback' is enabled
Mon Feb 20 17:13:57 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Feb 20 17:13:57 2017 daemon.notice netifd: Interface 'loopback' is now up
Mon Feb 20 17:13:57 2017 daemon.notice netifd: Interface 'wan' is enabled
Mon Feb 20 17:13:57 2017 kern.info kernel: [ 21.592930] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Mon Feb 20 17:13:57 2017 daemon.notice netifd: Interface 'wan6' is enabled
Mon Feb 20 17:13:57 2017 daemon.info odhcpd[862]: Raising SIGUSR1 due to address change on br-lan
Mon Feb 20 17:13:57 2017 daemon.notice netifd: Network device 'lo' link is up
Mon Feb 20 17:13:57 2017 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Feb 20 17:13:57 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Feb 20 17:13:58 2017 daemon.info odhcpd[862]: Initial RA router lifetime 0, 1 address(es) available on br-lan
Mon Feb 20 17:13:58 2017 daemon.notice odhcpd[862]: Failed to send to ff02::1%br-lan (Address not available)
Mon Feb 20 17:14:00 2017 kern.info kernel: [ 25.071843] eth0: link up (1000Mbps/Full duplex)
Mon Feb 20 17:14:00 2017 kern.info kernel: [ 25.076589] br-lan: port 1(eth0) entered forwarding state
Mon Feb 20 17:14:00 2017 kern.info kernel: [ 25.082148] br-lan: port 1(eth0) entered forwarding state
Mon Feb 20 17:14:00 2017 daemon.notice netifd: Network device 'eth0' link is up
Mon Feb 20 17:14:00 2017 daemon.notice netifd: bridge 'br-lan' link is up
Mon Feb 20 17:14:00 2017 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Feb 20 17:14:00 2017 kern.info kernel: [ 25.126428] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Mon Feb 20 17:14:01 2017 daemon.info odhcpd[862]: Initial RA router lifetime 0, 1 address(es) available on br-lan
Mon Feb 20 17:14:01 2017 daemon.notice odhcpd[862]: Failed to send to ff02::1%br-lan (Address not available)
Mon Feb 20 17:14:02 2017 kern.info kernel: [ 27.080270] br-lan: port 1(eth0) entered forwarding state
Mon Feb 20 17:14:05 2017 daemon.info dnsmasq[1023]: started, version 2.76 cachesize 150
Mon Feb 20 17:14:05 2017 daemon.info dnsmasq[1023]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Mon Feb 20 17:14:05 2017 daemon.info dnsmasq[1023]: DNS service limited to local subnets
Mon Feb 20 17:14:05 2017 daemon.info dnsmasq-dhcp[1023]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Mon Feb 20 17:14:05 2017 daemon.info dnsmasq[1023]: using local addresses only for domain lan
Mon Feb 20 17:14:05 2017 daemon.warn dnsmasq[1023]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Feb 20 17:14:05 2017 daemon.info dnsmasq[1023]: read /etc/hosts - 4 addresses
Mon Feb 20 17:14:05 2017 daemon.info dnsmasq[1023]: read /tmp/hosts/odhcpd - 0 addresses
Mon Feb 20 17:14:05 2017 daemon.info dnsmasq[1023]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Mon Feb 20 17:14:05 2017 daemon.info dnsmasq-dhcp[1023]: read /etc/ethers - 0 addresses
Mon Feb 20 17:14:15 2017 authpriv.info dropbear[1088]: Not backgrounding
Mon Feb 20 17:14:42 2017 kern.warn kernel: [ 67.032879] done.
Mon Feb 20 17:14:42 2017 kern.notice kernel: [ 67.034884] jffs2: notice: (912) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mon Feb 20 17:14:42 2017 daemon.info mount_root: performing overlay whiteout
Mon Feb 20 17:14:42 2017 user.notice : setting up led WLAN5G
Mon Feb 20 17:14:43 2017 daemon.info procd: - init complete -
Mon Feb 20 17:14:54 2017 kern.notice kernel: [ 79.450286] random: nonblocking pool is initialized
Mon Feb 20 17:14:54 2017 daemon.info urandom_seed[1143]: Seed saved (/etc/urandom.seed)
Mon Feb 20 17:17:47 2017 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Mon Feb 20 17:17:47 2017 kern.info kernel: [ 252.421408] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mon Feb 20 17:17:47 2017 kern.info kernel: [ 252.432702] device wlan0 entered promiscuous mode
Mon Feb 20 17:17:47 2017 daemon.err hostapd: Using interface wlan0 with hwaddr 28:2c:b2:9b:91:54 and ssid "LEDE"
Mon Feb 20 17:17:47 2017 kern.info kernel: [ 252.459590] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mon Feb 20 17:17:47 2017 kern.info kernel: [ 252.466278] br-lan: port 2(wlan0) entered forwarding state
Mon Feb 20 17:17:47 2017 kern.info kernel: [ 252.471921] br-lan: port 2(wlan0) entered forwarding state
Mon Feb 20 17:17:47 2017 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Mon Feb 20 17:17:47 2017 daemon.notice hostapd: wlan0: AP-ENABLED
Mon Feb 20 17:17:48 2017 daemon.notice netifd: Network device 'wlan0' link is up
Mon Feb 20 17:17:49 2017 kern.info kernel: [ 254.470305] br-lan: port 2(wlan0) entered forwarding state

dmesg
[ 0.000000] Linux version 4.4.50 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3101-bce140e) ) #0 Mon Feb 20 17:13:44 2017
[ 0.000000] MyLoader: sysp=fbaff7f7, boardp=cbcffffb, parts=dffbcff7
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9344 rev 3
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] No valid device tree found, continuing without
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 803d04d0, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: board=TL-WDR3320-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 60352K/65536K available (3071K kernel code, 165K rwdata, 412K rodata, 312K init, 205K bss, 5184K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
[ 0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
[ 0.008702] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[ 0.081675] pid_max: default: 32768 minimum: 301
[ 0.086956] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.094345] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.104785] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.116967] NET: Registered protocol family 16
[ 0.123323] MIPS: machine is TP-LINK TL-WDR3320 v2
[ 0.132077] registering PCI controller with io_map_base unset
[ 0.582658] PCI host bridge to bus 0000:00
[ 0.587245] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 0.594959] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.601165] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.608745] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.617619] pci 0000:00:00.0: [168c:002e] type 00 class 0x028000
[ 0.617653] pci 0000:00:00.0: fixup device configuration
[ 0.625328] pci 0000:00:00.0: reg 0x10: [mem 0x10000000-0x1000ffff 64bit]
[ 0.625447] pci 0000:00:00.0: supports D1
[ 0.625464] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.625708] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.625746] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[ 0.633951] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.640249] clocksource: Switched to clocksource MIPS
[ 0.647118] NET: Registered protocol family 2
[ 0.652975] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.660813] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.667909] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.675106] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.681671] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.688921] NET: Registered protocol family 1
[ 0.693862] PCI: CLS 0 bytes, default 32
[ 0.698606] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.705537] Crashlog allocated RAM at address 0x3f00000
[ 0.726879] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.733433] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.747038] io scheduler noop registered
[ 0.751462] io scheduler deadline registered (default)
[ 0.757425] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.767475] console [ttyS0] disabled
[ 0.791562] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[ 0.801189] console [ttyS0] enabled
[ 0.808596] bootconsole [early0] disabled
[ 0.822433] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.827931] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.833971] 5 tp-link partitions found on MTD device spi0.0
[ 0.839636] Creating 5 MTD partitions on "spi0.0":
[ 0.844548] 0x000000000000-0x000000020000 : "u-boot"
[ 0.851174] 0x000000020000-0x000000152e54 : "kernel"
[ 0.857953] 0x000000152e54-0x000000ff0000 : "rootfs"
[ 0.864774] mtd: device 2 (rootfs) set to be root filesystem
[ 0.870622] 1 squashfs-split partitions found on MTD device rootfs
[ 0.876902] 0x000000380000-0x000000ff0000 : "rootfs_data"
[ 0.884146] 0x000000ff0000-0x000001000000 : "art"
[ 0.890775] 0x000000020000-0x000000ff0000 : "firmware"
[ 0.914672] libphy: ag71xx_mdio: probed
[ 1.502138] ag71xx-mdio.1: Found an AR934X built-in switch
[ 1.544462] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.142334] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[ 2.152339] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.160432] NET: Registered protocol family 10
[ 2.169218] NET: Registered protocol family 17
[ 2.173865] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.186792] 8021q: 802.1Q VLAN Support v1.8
[ 2.197198] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.206266] Freeing unused kernel memory: 312K (803f2000 - 80440000)
[ 3.346650] init: Console is alive
[ 3.350415] init: - watchdog -
[ 4.333526] usbcore: registered new interface driver usbfs
[ 4.339199] usbcore: registered new interface driver hub
[ 4.344762] usbcore: registered new device driver usb
[ 4.355501] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.363721] ehci-platform: EHCI generic platform driver
[ 4.369130] ehci-platform ehci-platform: EHCI Host Controller
[ 4.375057] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 4.385197] ehci-platform ehci-platform: TX-TX IDP fix enabled
[ 4.391150] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 4.410296] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 4.417589] hub 1-0:1.0: USB hub found
[ 4.421863] hub 1-0:1.0: 1 port detected
[ 4.432001] init: - preinit -
[ 5.135342] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.163199] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[ 7.291827] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 7.303043] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 7.525619] procd: - early -
[ 7.528658] procd: - watchdog -
[ 8.165792] procd: - ubus -
[ 8.270763] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[ 8.280836] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[ 8.290545] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[ 8.299701] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[ 8.309270] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[ 8.318504] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[ 8.327847] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[ 8.337226] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[ 8.346775] procd: - init -
[ 8.749190] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.768030] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[ 8.775777] Backport generated by backports.git backports-20160324-9-g0e38f5c
[ 8.786380] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.800813] nf_conntrack version 0.5.0 (947 buckets, 3788 max)
[ 8.842040] xt_time: kernel timezone is -0000
[ 8.908868] PPP generic driver version 2.4.2
[ 8.915933] NET: Registered protocol family 24
[ 8.964593] ath: EEPROM regdomain: 0x0
[ 8.964614] ath: EEPROM indicates default country code should be used
[ 8.964624] ath: doing EEPROM country->regdmn map search
[ 8.964646] ath: country maps to regdmn code: 0x3a
[ 8.964657] ath: Country alpha2 being used: US
[ 8.964667] ath: Regpair used: 0x3a
[ 8.977791] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.983397] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
[ 8.990376] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 9.001252] ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
[ 9.008420] ath: phy1: Bad EEPROM VER 0x0000 or REV 0x04e0
[ 9.013999] ath: phy1: Unable to initialize hardware; initialization status: -22
[ 9.021517] ath9k 0000:00:00.0: Failed to initialize device
[ 9.027226] ath9k: probe of 0000:00:00.0 failed with error -22
[ 10.343902] random: jshn: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
[ 17.510662] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 17.517684] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 17.524468] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 21.478933] device eth0 entered promiscuous mode
[ 21.502377] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 21.592930] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 25.071843] eth0: link up (1000Mbps/Full duplex)
[ 25.076589] br-lan: port 1(eth0) entered forwarding state
[ 25.082148] br-lan: port 1(eth0) entered forwarding state
[ 25.126428] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 27.080270] br-lan: port 1(eth0) entered forwarding state
[ 67.032879] done.
[ 67.034884] jffs2: notice: (912) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 79.450286] random: nonblocking pool is initialized
[ 252.421408] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 252.432702] device wlan0 entered promiscuous mode
[ 252.459590] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 252.466278] br-lan: port 2(wlan0) entered forwarding state
[ 252.471921] br-lan: port 2(wlan0) entered forwarding state
[ 254.470305] br-lan: port 2(wlan0) entered forwarding state

All LEDE like this，no 2.4GHz

root@LEDE:~# cat /etc/config/wireless

config wifi-device 'radio0'
option type 'mac80211'
option channel '36'
option hwmode '11a'
option path 'platform/ar934x_wmac'
option htmode 'HT20'

config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'LEDE'
option encryption 'none'

root@LEDE:~#

@openwrt-bot
Copy link
Author

pepe2k:

[...]
PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
ath: phy1: Bad EEPROM VER 0x0000 or REV 0x04e0
ath: phy1: Unable to initialize hardware; initialization status: -22
ath9k 0000:00:00.0: Failed to initialize device
ath9k: probe of 0000:00:00.0 failed with error -22
[...]

Did you manipulate with ART data partition in your device?

@openwrt-bot
Copy link
Author

kos:

ART normal

root@LEDE:# cat /proc/mtd
dev: size erasesize name
mtd0: 00020000 00010000 "u-boot"
mtd1: 00132e54 00010000 "kernel"
mtd2: 00e9d1ac 00010000 "rootfs"
mtd3: 00c70000 00010000 "rootfs_data"
mtd4: 00010000 00010000 "art"
mtd5: 00fd0000 00010000 "firmware"
root@LEDE:# dd if=/dev/mtd4 of=/tmp/art.bin
128+0 records in
128+0 records out
root@LEDE:# hexdump /tmp/art.bin
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0001000 0202 0102 0304 0506 0000 0000 0000 0000
0001010 0000 0000 0000 0000 0000 0000 0000 1f00
0001020 3301 0000 0000 0400 2800 6d02 0300 08ff
0001030 4001 0000 0020 0200 00cc cc0c 0050 0150
0001040 0150 0100 0000 0000 001c 00a4 0000 0000
0001050 ff00 0000 0000 0000 0000 0000 0000 0000
0001060 0e0e 0300 2ce2 0002 0e1c e0e0 000c e0e0
0001070 0000 0000 0000 0000 0000 0000 0000 0000
0001080 0000 0000 0000 0000 0000 7089 ac00 0000
0001090 0000 0000 0000 0000 0000 0000 0000 0000
*
00010c0 0000 0070 b870 89ac 7089 ac70 89ac 2424
00010d0 2424 2424 2424 2020 1c18 2020 1c18 2020
00010e0 1c18 2020 2020 1c14 2020 1c14 2020 1c14
00010f0 2020 2020 1c14 2020 1c14 2020 1c14 2020
0001100 2020 1c14 2020 1c14 2020 1c14 2020 2020
0001110 1c14 2020 1c14 2020 1c14 2020 2020 1c14
0001120 2020 1c14 2020 1c14 2020 2020 1c14 2020
0001130 1c14 2020 1c14 1112 1517 4142 4547 3132
0001140 3537 7075 9da2 7075 a2ff 7075 a2ff 7a7f
0001150 9398 7075 acb8 7075 ac00 7075 ac00 7a7f
0001160 93a2 7075 ac00 7075 ac00 7075 ac00 7a7f
0001170 93a2 3c7c 3c3c 3c7c 3c3c 7c3c 3c7c 7c3c
0001180 3c3c 3c7c 3c3c 3c7c 3c3c 3c7c 7c3c 3c7c
0001190 3c3c 3c7c 3c3c 3c7c 3c3c 3c7c 7c7c 3c7c
00011a0 7c7c 2002 0000 1111 0100 1000 1000 1000
00011b0 0000 0000 0000 5300 0000 0000 00ff 0000
00011c0 0000 0000 0000 0000 0000 0000 0f0e 0e03
00011d0 002d e200 020e 1c00 0000 0000 0000 0000
00011e0 0000 0000 0000 0000 0047 5200 0000 0000
00011f0 0000 0000 0000 00bd c5cd a4b4 bdcd cde8
0001200 0081 0000 00e9 0085 0000 00e7 0085 0000
0001210 0000 0000 0000 0000 0000 0000 0000 0000
0001220 0000 0000 0000 0000 0000 0000 0000 00df
0001230 0087 0000 00de 0087 0000 00da 0087 0000
0001240 0000 0000 0000 0000 0000 0000 0000 0000
*
0001280 0000 0000 0000 0000 0000 0000 0000 0018
0001290 4c68 8ca0 b4bd cd18 4c68 8ca0 b4bd cd1a
00012a0 4e66 8e9e aebf c726 261e 1c26 261e 1c26
00012b0 261e 1c26 261e 1c26 261e 1c26 261e 1c26
00012c0 261e 1c26 261e 1c26 2624 201e 1a24 1e18
00012d0 1600 0000 0026 2624 201e 1a24 1e18 1600
00012e0 0000 0026 2624 201e 1a24 1e18 1600 0000
00012f0 0026 2624 201e 1a24 1e18 1600 0000 0026
0001300 2624 201e 1a24 1e18 1600 0000 0026 2624
0001310 201e 1a24 1e18 1600 0000 0026 2624 201e
0001320 1a24 1e18 1600 0000 0026 2624 201e 1a24
0001330 1e18 1600 0000 0024 2422 201e 1a22 1a18
0001340 1600 0000 0024 2422 201e 1a22 1a18 1600
0001350 0000 0024 2422 201e 1a22 1a18 1600 0000
0001360 0024 2422 201e 1a22 1a18 1600 0000 0024
0001370 2422 201e 1a22 1a18 1600 0000 0024 2422
0001380 201e 1a22 1a18 1600 0000 0024 2422 201e
0001390 1a22 1a18 1600 0000 0024 2422 201e 1a22
00013a0 1a18 1600 0000 0010 1618 4046 4830 3638
00013b0 4c5c 688c 98b0 bdcd 4c5c 688c 98b0 bdcd
00013c0 4c54 648c 9cac bdc5 4c54 6878 8ca0 b9cd
00013d0 4c54 6878 8ca0 b9cd 4c54 6878 8ca0 b9cd
*
00013f0 4c54 6878 8ca0 b9cd 3c7c 3c3c 7c3c 3c7c
0001400 3c7c 3c3c 7c3c 3c7c 3c7c 3c3c 7c3c 3c7c
0001410 3c7c 3c7c 3c7c 3c7c 3c7c 3c7c 3c7c 3c7c
*
0001440 ffff ffff ffff ffff ffff ffff ffff ffff
*
0005000 a55a 0000 0003 6000 168c 002d 6008 0001
0005010 0280 602c 168c 002d 5000 168c 002e 5008
0005020 0001 0280 502c 168c a125 5064 8cc0 0504
0005030 570c 3f01 2200 506c 3c11 0003 4004 050b
0005040 004a 4074 0003 0000 4000 5001 01c2 6034
0005050 0044 0000 510c 2010 0006 5164 1412 ff24
0005060 5168 17ff 0015 5068 2010 0019 ffff ffff
0005070 ffff ffff ffff ffff ffff ffff ffff ffff
*
0005100 02d7 1b9b e004 0200 0000 001f 0003 3f13
0005110 0328 0303 0000 0000 0000 0009 1b00 062c
0005120 fbfa fa00 0000 0000 0000 0000 0000 0000
0005130 0000 0000 0000 0000 0000 0000 0000 0000
*
0005160 0000 0010 0000 0010 0000 0210 0000 2d20
0005170 2000 00d8 0002 0e1c ffff 0201 0000 0000
0005180 0100 0e0e 0000 0000 002d 0003 0303 0303
0005190 0300 0000 0000 0000 0000 0000 0000 0000
00051a0 0000 0000 0000 0000 0000 0000 0000 0080
00051b0 0000 0000 0000 0000 0000 0000 0000 0000
00051c0 0000 0070 89a2 0100 0000 0000 0000 0000
00051d0 7900 0000 0000 0000 0000 2c00 0000 0000
00051e0 0000 0000 0000 0000 0000 0000 0000 0100
00051f0 0000 0000 0000 0000 7900 0000 0000 0000
0005200 0000 2c00 0000 0000 0000 0000 0000 0000
0005210 0000 0000 0000 0100 0000 0000 0000 0000
0005220 7900 0000 0000 0000 0000 2c00 0000 0000
0005230 0000 0000 0000 0000 0000 0000 0000 0400
0005240 0000 0000 0000 0000 7900 0000 0000 0000
0005250 0000 2c00 0000 0000 0000 0000 0000 0000
0005260 0000 0000 0000 0300 0000 0000 0000 0000
0005270 7900 0000 0000 0000 0000 2c00 0000 0000
0005280 0000 0000 0000 0000 0000 0000 0000 0400
0005290 0000 0000 0000 0000 7900 0000 0000 0000
00052a0 0000 2c00 0000 0000 0000 0000 0000 0000
00052b0 0000 0000 0000 7026 2626 268e 2626 2626
00052c0 ff00 0000 0070 2222 201b 8e22 2220 1bac
00052d0 2222 201b 7022 2222 2222 1c1a 178e 2222
00052e0 2222 221c 1a17 ac22 2222 2222 1c1a 1770
00052f0 2020 2020 201c 1a16 8e20 2020 2020 1c1a
0005300 16ac 2020 2020 201c 1a16 1112 1517 4142
0005310 4547 3132 3537 703c 757c 9d7c a23c 703c
0005320 757c 9d7c a23c 753c 7a7c 9d3c a27c 753c
0005330 7a7c 9d3c a27c 753c 7a7c 9d3c a27c 753c
0005340 7a7c 9d3c a27c 753c 7a7c 7f3c 897c 753c
0005350 7a7c 7f3c 897c 703c 757c ac3c b83c 703c
0005360 757c ac3c b83c 703c 757c ac3c 0000 703c
0005370 757c ac3c 0000 703c 757c ac3c 0000 703c
0005380 757c ac3c 0000 7a3c 7f7c 937c a23c 7a3c
0005390 7f7c 937c a23c 703c 757c ac3c 0000 703c
00053a0 757c ac3c 0000 703c 757c ac3c 0000 703c
*
00053c0 757c ac3c 0000 7a3c 7f7c 937c a23c 7a3c
00053d0 7f7c 937c a23c 00ff ffff ffff ffff ffff
00053e0 ffff ffff ffff ffff ffff ffff ffff ffff
*
0010000
root@LEDE:#

@openwrt-bot
Copy link
Author

kos:

openwrt-chaos_calmer
/ # dmesg
[ 0.000000] Linux version 3.18.36 (root@kos) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49363) ) #9 Tue Aug 9 14:34:23 CST 2016
[ 0.000000] MyLoader: sysp=ffefffff, boardp=ffffffff, parts=ffffffff
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9344 rev 3
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 80359cf0, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: board=TL-WDR3320-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 60880K/65536K available (2484K kernel code, 126K rwdata, 528K rodata, 244K init, 252K bss, 4656K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.000MHz
[ 0.000000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090000] NET: Registered protocol family 16
[ 0.090000] MIPS: machine is TP-LINK TL-WDR3320 v2
[ 0.100000] registering PCI controller with io_map_base unset
[ 0.540000] PCI host bridge to bus 0000:00
[ 0.550000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 0.550000] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.560000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.560000] pci 0000:00:00.0: [168c:002e] type 00 class 0x028000
[ 0.560000] pci 0000:00:00.0: fixup device configuration
[ 0.570000] pci 0000:00:00.0: reg 0x10: [mem 0x10000000-0x1000ffff 64bit]
[ 0.570000] pci 0000:00:00.0: supports D1
[ 0.570000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.570000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.570000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[ 0.580000] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.580000] Switched to clocksource MIPS
[ 0.590000] NET: Registered protocol family 2
[ 0.590000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.590000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.600000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.610000] TCP: reno registered
[ 0.610000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.620000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.630000] NET: Registered protocol family 1
[ 0.630000] PCI: CLS 0 bytes, default 32
[ 0.630000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.660000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.670000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.680000] msgmni has been set to 118
[ 0.680000] io scheduler noop registered
[ 0.690000] io scheduler deadline registered (default)
[ 0.690000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.700000] console [ttyS0] disabled
[ 0.730000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[ 0.730000] console [ttyS0] enabled
[ 0.740000] bootconsole [early0] disabled
[ 0.750000] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.760000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.760000] 5 tp-link partitions found on MTD device spi0.0
[ 0.770000] Creating 5 MTD partitions on "spi0.0":
[ 0.770000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.780000] 0x000000020000-0x000000136560 : "kernel"
[ 0.790000] 0x000000136560-0x000000ff0000 : "rootfs"
[ 0.790000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.800000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.800000] 0x000000560000-0x000000ff0000 : "rootfs_data"
[ 0.810000] 0x000000ff0000-0x000001000000 : "art"
[ 0.820000] 0x000000020000-0x000000ff0000 : "firmware"
[ 0.840000] libphy: ag71xx_mdio: probed
[ 1.430000] ag71xx-mdio.1: Found an AR934X built-in switch
[ 1.470000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.070000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[ 2.080000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.080000] TCP: cubic registered
[ 2.090000] NET: Registered protocol family 17
[ 2.090000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.110000] 8021q: 802.1Q VLAN Support v1.8
[ 2.120000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.130000] Freeing unused kernel memory: 244K (80373000 - 803b0000)
[ 3.710000] init: Console is alive
[ 3.710000] init: - watchdog -
[ 5.730000] init: - preinit -
[ 6.450000] random: procd urandom read with 10 bits of entropy available
[ 9.530000] eth0: link up (1000Mbps/Full duplex)
[ 9.600000] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 9.630000] eth0: link down
[ 9.640000] procd: - early -
[ 9.650000] procd: - watchdog -
[ 10.300000] procd: - ubus -
[ 11.310000] procd: - init -
[ 12.410000] u32 classifier
[ 12.410000] input device check on
[ 12.420000] Actions configured
[ 12.420000] Mirror/redirect action on
[ 12.460000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[ 12.470000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[ 12.480000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.510000] nf_conntrack version 0.5.0 (955 buckets, 3820 max)
[ 12.630000] xt_time: kernel timezone is -0000
[ 12.960000] PPP generic driver version 2.4.2
[ 12.970000] NET: Registered protocol family 24
[ 13.110000] ath: phy0: eeprom contains invalid mac address: 01:02:03:04:05:06
[ 13.120000] ath: phy0: random mac address will be used: 2e:f3:5e:ac:46:c5
[ 13.120000] ath: EEPROM regdomain: 0x0
[ 13.120000] ath: EEPROM indicates default country code should be used
[ 13.120000] ath: doing EEPROM country->regdmn map search
[ 13.120000] ath: country maps to regdmn code: 0x3a
[ 13.120000] ath: Country alpha2 being used: US
[ 13.120000] ath: Regpair used: 0x3a
[ 13.140000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.140000] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
[ 13.150000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 13.160000] ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
[ 13.170000] ath: EEPROM regdomain: 0x0
[ 13.170000] ath: EEPROM indicates default country code should be used
[ 13.170000] ath: doing EEPROM country->regdmn map search
[ 13.170000] ath: country maps to regdmn code: 0x3a
[ 13.170000] ath: Country alpha2 being used: US
[ 13.170000] ath: Regpair used: 0x3a
[ 13.180000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 13.180000] ieee80211 phy1: Atheros AR9287 Rev:2 mem=0xb0000000, irq=40
[ 22.360000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 22.370000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 22.380000] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 24.330000] device eth0 entered promiscuous mode
[ 27.560000] eth0: link up (1000Mbps/Full duplex)
[ 27.560000] br-lan: port 1(eth0) entered forwarding state
[ 27.570000] br-lan: port 1(eth0) entered forwarding state
[ 27.720000] device wlan1 entered promiscuous mode
[ 27.720000] br-lan: port 2(wlan1) entered forwarding state
[ 27.730000] br-lan: port 2(wlan1) entered forwarding state
[ 27.900000] device wlan0 entered promiscuous mode
[ 27.900000] br-lan: port 3(wlan0) entered forwarding state
[ 27.910000] br-lan: port 3(wlan0) entered forwarding state
[ 29.570000] br-lan: port 1(eth0) entered forwarding state
[ 29.730000] br-lan: port 2(wlan1) entered forwarding state
[ 29.910000] br-lan: port 3(wlan0) entered forwarding state
[ 46.760000] random: nonblocking pool is initialized
[ 75.290000] done.
[ 75.290000] jffs2: notice: (1247) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
/ #

/ # cat /etc/config/wireless
config wifi-device radio0
option type mac80211
option channel 149
option hwmode 11a
option path 'platform/ar934x_wmac'
option htmode HT40
# REMOVE THIS LINE TO ENABLE WIFI:
option noscan 1
option country NZ
option txpower 30

config wifi-iface
option device radio0
option network lan
option mode ap
option wpa_group_rekey '0'
option wpa_pair_rekey '0'
option wpa_master_rekey '0'
option ssid UOSBOX_9B9154
option encryption none

config wifi-device radio1
option type mac80211
option channel 11
option hwmode 11n
option path 'pci0000:00/0000:00:00.0'
option htmode HT40
# REMOVE THIS LINE TO ENABLE WIFI:
option noscan 1
option country NZ
option txpower 30

config wifi-iface
option device radio1
option network lan
option mode ap
option wpa_group_rekey '0'
option wpa_pair_rekey '0'
option wpa_master_rekey '0'
option ssid UOSBOX_9B9155
option encryption none

/ #

@openwrt-bot
Copy link
Author

mkresin:

Okay, I was able to reproduce the issue using your eeprom/caldata dump.

The issue you are having is a wrong endianness bit in your caldata for the pci wireless. The endianness bit (eepMisc) is set to little endian but your caldata is big endian.

The mismatch was most likely ignored till http://ath9k-devel.ath9k.narkive.com/2q5A6nu0/patch-0-5-ath9k-eeprom-swapping-improvements was applied upstream a few month ago .

I've done a quick compare with the caldata of my bt-hh5a (AR9227):

bt-hh5a (AR9227):

length: 02d7
checksum: bade
version: e004
opcapsflags: 16
eepMisc: 01

             opcapsflags: 10110

AR5416_OPFLAGS_11A = 00000001
AR5416_OPFLAGS_11G = 00000010 < Allow 2GHz
AR5416_OPFLAGS_N_5G_HT40 = 00000100 < Disable 5G HT40
AR5416_OPFLAGS_N_2G_HT40 = 00001000
AR5416_OPFLAGS_N_5G_HT20 = 00010000 < Disable 5G HT20
AR5416_OPFLAGS_N_2G_HT20 = 00100000

tl-wdr3320-v2 (ar9287):

length: 02d7
checksum: 1b9b
version: e004
opcapsflags: 02
eepMisc: 00

                opcapsflags: 10

AR5416_OPFLAGS_11A = 00000001
AR5416_OPFLAGS_11G = 00000010 < Allow 2GHz
AR5416_OPFLAGS_N_5G_HT40 = 00000100
AR5416_OPFLAGS_N_2G_HT40 = 00001000
AR5416_OPFLAGS_N_5G_HT20 = 00010000
AR5416_OPFLAGS_N_2G_HT20 = 00100000

If I fix the endianness bit (and the checksum of course) everything does work. I've attached the fixed caldata for your ar9287.

I'm not yet sure whether:

  • it is a driver bug (unlikely since it is the first report)
  • the tl-wdr3320-v2 is shipped with an incorrect art partition/caldata by default
  • you have changed/manipulated the art partition

To repeat the question asked by pepe: Did you manipulate with ART data partition in your device?

@openwrt-bot
Copy link
Author

kos:

this is wdr3320-art.bin

@openwrt-bot
Copy link
Author

kos:

Do you mean 5GHz and 2.4GHz eeprom/caldata interchange?

@openwrt-bot
Copy link
Author

kos:

Definitely not a ART problem

@openwrt-bot
Copy link
Author

kos:

Modify ART， Okay
10.521575] xt_time: kernel timezone is -0000
[ 10.600575] PPP generic driver version 2.4.2
[ 10.607863] NET: Registered protocol family 24
[ 10.664449] ath: EEPROM regdomain: 0x0
[ 10.664472] ath: EEPROM indicates default country code should be used
[ 10.664481] ath: doing EEPROM country->regdmn map search
[ 10.664503] ath: country maps to regdmn code: 0x3a
[ 10.664515] ath: Country alpha2 being used: US
[ 10.664525] ath: Regpair used: 0x3a
[ 10.677678] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.683063] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
[ 10.690009] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 10.700877] ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
[ 10.709511] ath: EEPROM regdomain: 0x0
[ 10.709522] ath: EEPROM indicates default country code should be used
[ 10.709531] ath: doing EEPROM country->regdmn map search
[ 10.709553] ath: country maps to regdmn code: 0x3a
[ 10.709564] ath: Country alpha2 being used: US
[ 10.709574] ath: Regpair used: 0x3a
[ 10.723096] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 10.728422] ieee80211 phy1: Atheros AR9287 Rev:2 mem=0xb0000000, irq=40
[ 10.853059] kmodloader: done loading kernel modules from /etc/modules.d/*

Please tell me to fix this BUG patch
Modifying ART is not the ultimate solution

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
flyspray
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@openwrt-bot