You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Using LEDE Reboot 17.01.0 r3205-59508e3 on Lenovo Y1.
After setting the Inactivity timeout to something not 0 in luci (option demand '5' in the config file),the dial procedure will be stopping at some stage,can't establish a connect.
And the log will be like this: May 7 08:48:52 OpenWrt daemon.info pppd[9714]: Plugin rp-pppoe.so loaded.
May 7 08:48:52 OpenWrt daemon.info pppd[9714]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
May 7 08:48:52 OpenWrt daemon.notice pppd[9714]: pppd 2.4.5 started by root, uid 0
May 7 08:48:52 OpenWrt daemon.info pppd[9714]: Using interface pppoe-wan
May 7 08:48:52 OpenWrt daemon.notice pppd[9714]: local IP address 10.64.64.64
May 7 08:48:52 OpenWrt daemon.notice pppd[9714]: remote IP address 10.112.112.112
Without the demand option everything works fine: May 7 09:08:43 OpenWrt daemon.info pppd[2712]: Plugin rp-pppoe.so loaded.
May 7 09:08:43 OpenWrt daemon.info pppd[2712]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
May 7 09:08:43 OpenWrt daemon.notice pppd[2712]: pppd 2.4.5 started by root, uid 0
May 7 09:08:48 OpenWrt daemon.info pppd[2712]: PPP session is 9873
May 7 09:08:48 OpenWrt daemon.warn pppd[2712]: Connected to 00:30:88:1f:30:07 via interface eth2
May 7 09:08:48 OpenWrt daemon.info pppd[2712]: Using interface pppoe-wan
May 7 09:08:48 OpenWrt daemon.notice pppd[2712]: Connect: pppoe-wan <--> eth2
May 7 09:08:48 OpenWrt daemon.notice pppd[2712]: PAP authentication succeeded
May 7 09:08:48 OpenWrt daemon.notice pppd[2712]: peer from calling number 00:30:88:1F:30:07 authorized
May 7 09:08:49 OpenWrt daemon.notice pppd[2712]: local IP address 93.232.124.118
May 7 09:08:49 OpenWrt daemon.notice pppd[2712]: remote IP address 217.0.119.51
May 7 09:08:49 OpenWrt daemon.notice pppd[2712]: primary DNS address 217.0.43.17
May 7 09:08:49 OpenWrt daemon.notice pppd[2712]: secondary DNS address 217.0.43.49
(these logs is copy from the openwrt bug ticket[[https://dev.openwrt.org/ticket/13474|External Link]] because my log for this part had be override by massive "ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2",sincere apology,smile)
It seems to be a historied legacy bug from Openwrt BB (or AA),and there is a solution by changing 2 files to make pppd disconnect when inactivity but can't re-dial:
1./etc/config/network, disable IPv6 config interface 'wan'
option ipv6 0
2./lib/netifd/proto/ppp.sh: change nodefaultroute to defaultroute in the function of ppp_generic_setup() proto_run_command "$config" /usr/sbin/pppd
nodetach ipparam "$config"
ifname "$pppname"
${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}}
${ipv6:++ipv6}
defaultroute </code>
Hope this stinking bug can be terminated in LEDE
The text was updated successfully, but these errors were encountered:
qxwd123:
Using LEDE Reboot 17.01.0 r3205-59508e3 on Lenovo Y1.
After setting the Inactivity timeout to something not 0 in luci (option demand '5' in the config file),the dial procedure will be stopping at some stage,can't establish a connect.
And the log will be like this:
May 7 08:48:52 OpenWrt daemon.info pppd[9714]: Plugin rp-pppoe.so loaded.
May 7 08:48:52 OpenWrt daemon.info pppd[9714]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
May 7 08:48:52 OpenWrt daemon.notice pppd[9714]: pppd 2.4.5 started by root, uid 0
May 7 08:48:52 OpenWrt daemon.info pppd[9714]: Using interface pppoe-wan
May 7 08:48:52 OpenWrt daemon.notice pppd[9714]: local IP address 10.64.64.64
May 7 08:48:52 OpenWrt daemon.notice pppd[9714]: remote IP address 10.112.112.112
Without the demand option everything works fine:
May 7 09:08:43 OpenWrt daemon.info pppd[2712]: Plugin rp-pppoe.so loaded.
May 7 09:08:43 OpenWrt daemon.info pppd[2712]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
May 7 09:08:43 OpenWrt daemon.notice pppd[2712]: pppd 2.4.5 started by root, uid 0
May 7 09:08:48 OpenWrt daemon.info pppd[2712]: PPP session is 9873
May 7 09:08:48 OpenWrt daemon.warn pppd[2712]: Connected to 00:30:88:1f:30:07 via interface eth2
May 7 09:08:48 OpenWrt daemon.info pppd[2712]: Using interface pppoe-wan
May 7 09:08:48 OpenWrt daemon.notice pppd[2712]: Connect: pppoe-wan <--> eth2
May 7 09:08:48 OpenWrt daemon.notice pppd[2712]: PAP authentication succeeded
May 7 09:08:48 OpenWrt daemon.notice pppd[2712]: peer from calling number 00:30:88:1F:30:07 authorized
May 7 09:08:49 OpenWrt daemon.notice pppd[2712]: local IP address 93.232.124.118
May 7 09:08:49 OpenWrt daemon.notice pppd[2712]: remote IP address 217.0.119.51
May 7 09:08:49 OpenWrt daemon.notice pppd[2712]: primary DNS address 217.0.43.17
May 7 09:08:49 OpenWrt daemon.notice pppd[2712]: secondary DNS address 217.0.43.49
(these logs is copy from the openwrt bug ticket[[https://dev.openwrt.org/ticket/13474|External Link]] because my log for this part had be override by massive "ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2",sincere apology,smile)
It seems to be a historied legacy bug from Openwrt BB (or AA),and there is a solution by changing 2 files to make pppd disconnect when inactivity but can't re-dial:
1./etc/config/network, disable IPv6
config interface 'wan'
option ipv6 0
2./lib/netifd/proto/ppp.sh: change nodefaultroute to defaultroute in the function of ppp_generic_setup()
proto_run_command "$config" /usr/sbin/pppd
nodetach ipparam "$config"
ifname "$pppname"
${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}}
${ipv6:++ipv6}
defaultroute </code>
Hope this stinking bug can be terminated in LEDE
The text was updated successfully, but these errors were encountered: