OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version Trunk
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Sven Kux - 15.03.2017

FS#632 - MP_CONFIG_INT settings not applied to meshpoint interface

Supply the following if possible:
- Tested with OM5P-AC (on ath10k)
- Using LEDE reboot-3637-gc8f7031ba7 with wpad-mesh

The 5GHz device was configured using following entry in /etc/config/wireless

config wifi-iface 'mesh2'         
        option device 'radio1'  
        option ifname 'mesh-5'  
        option network 'lan'    
        option mode 'mesh'      
        option mesh_id 'mymesh' 
        option disabled '0'
        option mcast_rate '54000'
        option macaddr 'ae:86:74:00:00:01'
        option mesh_ttl 1
        option mesh_fwding 0
        option ieee80211w 1
        option encryption 'psk2+aes'
        option key 'reallysecretkey'

It is expected that mesh_ttl is 1 and mesh_fwding is 0. But the reality is quite different:

<pre>
root@lede:/# iw dev mesh-5 get mesh_param mesh_fwding
1
root@lede:/# iw dev mesh-5 get mesh_param mesh_ttl
31
</pre>

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing