Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#554 - 5 Ghz radio fails to initialize on D-Link DGL-5500 #5997

Closed
openwrt-bot opened this issue Feb 25, 2017 · 0 comments
Closed

FS#554 - 5 Ghz radio fails to initialize on D-Link DGL-5500 #5997

openwrt-bot opened this issue Feb 25, 2017 · 0 comments
Labels

Comments

@openwrt-bot
Copy link

Larz1695:

While the 2.4 Ghz band works just fine on install, I have to install kmod-ath10k to get 5 Ghz functionality in OpenWRT 15.05.1 but the same package does not work on reboot 17.01.0. I have tried ath10k-firmware-qca988x-ct in an attempt to fix the issue but it did not work. Here is what I was able to pull from dmesg:

[ 0.000000] Linux version 4.4.50 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3101-bce140e) ) #0 Mon Feb 20 17:13:44 2017
[ 0.000000] MyLoader: sysp=42a08090, boardp=45a0e802, parts=12a80ca8
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] No valid device tree found, continuing without
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 803d04d0, node_mem_map 81000000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: board=DGL-5500-A1 console=ttyS0,115200 mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 125328K/131072K available (3071K kernel code, 165K rwdata, 412K rodata, 312K init, 205K bss, 5744K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
[ 0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
[ 0.008281] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[ 0.071186] pid_max: default: 32768 minimum: 301
[ 0.076195] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.083240] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092564] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.103917] NET: Registered protocol family 16
[ 0.109647] MIPS: machine is D-Link DGL-5500 rev. A1
[ 0.335390] registering PCI controller with io_map_base unset
[ 0.341594] ar724x-pci ar724x-pci.1: PCIe link is down
[ 0.347083] registering PCI controller with io_map_base unset
[ 0.360391] PCI host bridge to bus 0000:00
[ 0.364761] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
[ 0.372106] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.378026] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.385250] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.393707] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
[ 0.393764] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.393817] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.393876] pci 0000:00:00.0: supports D1 D2
[ 0.393890] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.394069] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.394096] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit]
[ 0.401911] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref]
[ 0.409704] PCI host bridge to bus 0000:01
[ 0.414088] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
[ 0.421394] pci_bus 0000:01: root bus resource [io 0x0001]
[ 0.427326] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
[ 0.434541] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[ 0.442984] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.443001] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.448844] clocksource: Switched to clocksource MIPS
[ 0.455085] NET: Registered protocol family 2
[ 0.460460] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.467878] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.474682] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.481524] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.487746] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.494626] NET: Registered protocol family 1
[ 0.499313] PCI: CLS 0 bytes, default 32
[ 0.502786] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.509355] Crashlog allocated RAM at address 0x3f00000
[ 0.526118] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.532359] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.544698] io scheduler noop registered
[ 0.548904] io scheduler deadline registered (default)
[ 0.554531] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.563486] console [ttyS0] disabled
[ 0.587355] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[ 0.596540] console [ttyS0] enabled
[ 0.603957] bootconsole [early0] disabled
[ 0.616222] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.622114] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.627255] 7 cmdlinepart partitions found on MTD device spi0.0
[ 0.633265] Creating 7 MTD partitions on "spi0.0":
[ 0.638123] 0x000000000000-0x000000030000 : "u-boot"
[ 0.644859] 0x000000030000-0x000000040000 : "nvram"
[ 0.651103] 0x000000040000-0x000000f30000 : "firmware"
[ 0.689017] 2 uimage-fw partitions found on MTD device firmware
[ 0.695036] 0x000000040000-0x000000172d26 : "kernel"
[ 0.701162] 0x000000172d26-0x000000f30000 : "rootfs"
[ 0.707448] mtd: device 4 (rootfs) set to be root filesystem
[ 0.713266] 1 squashfs-split partitions found on MTD device rootfs
[ 0.719545] 0x000000390000-0x000000f30000 : "rootfs_data"
[ 0.726317] 0x000000f30000-0x000000f60000 : "lang"
[ 0.732480] 0x000000f60000-0x000000fe0000 : "my-dlink"
[ 0.739016] 0x000000fe0000-0x000000ff0000 : "mac"
[ 0.745042] 0x000000ff0000-0x000001000000 : "art"
[ 0.760151] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
[ 1.386590] libphy: ag71xx_mdio: probed
[ 1.980352] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[ 1.991666] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII
[ 1.999457] NET: Registered protocol family 10
[ 2.007009] NET: Registered protocol family 17
[ 2.011611] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.024493] 8021q: 802.1Q VLAN Support v1.8
[ 2.035323] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 2.043654] Freeing unused kernel memory: 312K (803f2000 - 80440000)
[ 3.242461] init: Console is alive
[ 3.246075] init: - watchdog -
[ 4.166284] init: - preinit -
[ 4.646623] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.669496] random: procd: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
[ 6.090276] eth0: link up (1000Mbps/Full duplex)
[ 6.095095] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.946659] jffs2: notice: (393) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 7.966483] mount_root: switching to jffs2 overlay
[ 7.983093] urandom-seed: Seeding with /etc/urandom.seed
[ 8.153377] eth0: link down
[ 8.167534] procd: - early -
[ 8.171586] procd: - watchdog -
[ 8.781925] procd: - ubus -
[ 8.895386] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.905781] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.915695] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.924857] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.934286] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.943444] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.952731] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.962417] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.971869] procd: - init -
[ 9.697235] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.710393] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[ 9.718072] Backport generated by backports.git backports-20160324-9-g0e38f5c
[ 10.045627] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 10.051573] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 10.309904] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[ 10.320777] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 10.400233] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 10.409585] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[ 10.420106] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 10.573594] firmware ath10k!cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 10.582558] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
[ 10.593427] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 10.747728] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
[ 10.756986] ath10k_pci 0000:00:00.0: could not fetch firmware file 'ath10k/QCA988X/hw2.0/firmware-5.bin': -11
[ 10.767131] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
[ 10.777988] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 10.933284] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
[ 10.942567] ath10k_pci 0000:00:00.0: could not fetch firmware file 'ath10k/QCA988X/hw2.0/firmware-4.bin': -11
[ 10.952717] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
[ 10.963582] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 11.120695] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
[ 11.130628] ath10k_pci 0000:00:00.0: could not fetch firmware file 'ath10k/QCA988X/hw2.0/firmware-3.bin': -11
[ 11.140787] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-2.bin failed with error -2
[ 11.151646] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 11.304613] firmware ath10k!QCA988X!hw2.0!firmware-2.bin: firmware_loading_store: map pages failed
[ 11.313904] ath10k_pci 0000:00:00.0: could not fetch firmware file 'ath10k/QCA988X/hw2.0/firmware-2.bin': -11
[ 11.323985] ath10k_pci 0000:00:00.0: could not fetch firmware files (-11)
[ 11.330880] ath10k_pci 0000:00:00.0: could not probe fw (-11)
[ 11.394867] u32 classifier
[ 11.397622] input device check on
[ 11.401376] Actions configured
[ 11.410803] Mirror/redirect action on
[ 11.448524] nf_conntrack version 0.5.0 (1963 buckets, 7852 max)
[ 11.504925] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.555153] xt_time: kernel timezone is -0000
[ 11.572726] PPP generic driver version 2.4.2
[ 11.579165] NET: Registered protocol family 24
[ 11.600423] ath: EEPROM regdomain: 0x0
[ 11.600440] ath: EEPROM indicates default country code should be used
[ 11.600448] ath: doing EEPROM country->regdmn map search
[ 11.600464] ath: country maps to regdmn code: 0x3a
[ 11.600474] ath: Country alpha2 being used: US
[ 11.600481] ath: Regpair used: 0x3a
[ 11.616425] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 11.620480] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
[ 12.477022] random: jshn: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
[ 18.916623] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.942714] device eth0.1 entered promiscuous mode
[ 18.947585] device eth0 entered promiscuous mode
[ 18.975859] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 19.045891] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[ 20.190340] eth0: link up (1000Mbps/Full duplex)
[ 20.195167] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.248214] br-lan: port 1(eth0.1) entered listening state
[ 20.253855] br-lan: port 1(eth0.1) entered listening state
[ 20.259606] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[ 21.436779] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 21.712752] device wlan1 entered promiscuous mode
[ 22.248889] br-lan: port 1(eth0.1) entered learning state
[ 24.248864] br-lan: topology change detected, propagating
[ 24.254354] br-lan: port 1(eth0.1) entered forwarding state
[ 24.272756] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 30.421868] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 30.428458] br-lan: port 2(wlan1) entered listening state
[ 30.434010] br-lan: port 2(wlan1) entered listening state
[ 32.428863] br-lan: port 2(wlan1) entered learning state
[ 34.428855] br-lan: topology change detected, propagating
[ 34.434354] br-lan: port 2(wlan1) entered forwarding state
[ 48.158869] random: nonblocking pool is initialized
[ 4015.854570] conntrack: generic helper won't handle protocol 47. Please consider loading the specific helper module.
[14588.266824] device wlan1 left promiscuous mode
[14588.271416] br-lan: port 2(wlan1) entered disabled state
[14589.307578] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[14589.417089] device wlan1 entered promiscuous mode
[14596.007346] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[14596.013964] br-lan: port 2(wlan1) entered listening state
[14596.019476] br-lan: port 2(wlan1) entered listening state
[14596.031618] device wlan1-1 entered promiscuous mode
[14596.044319] IPv6: ADDRCONF(NETDEV_UP): wlan1-1: link is not ready
[14596.050559] br-lan: port 3(wlan1-1) entered listening state
[14596.056279] br-lan: port 3(wlan1-1) entered listening state
[14596.442237] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
[14598.013926] br-lan: port 2(wlan1) entered learning state
[14598.053935] br-lan: port 3(wlan1-1) entered learning state
[14600.013904] br-lan: topology change detected, propagating
[14600.019398] br-lan: port 2(wlan1) entered forwarding state
[14600.053918] br-lan: topology change detected, propagating
[14600.059405] br-lan: port 3(wlan1-1) entered forwarding state
[14627.152488] device wlan1-1 left promiscuous mode
[14627.157296] br-lan: port 3(wlan1-1) entered disabled state
[14627.626437] device wlan1 left promiscuous mode
[14627.631026] br-lan: port 2(wlan1) entered disabled state
[14629.739015] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[14629.919462] device wlan1 entered promiscuous mode
[14636.563382] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[14636.569999] br-lan: port 2(wlan1) entered listening state
[14636.575526] br-lan: port 2(wlan1) entered listening state
[14636.587660] device wlan1-1 entered promiscuous mode
[14636.604085] IPv6: ADDRCONF(NETDEV_UP): wlan1-1: link is not ready
[14636.610361] br-lan: port 3(wlan1-1) entered listening state
[14636.616081] br-lan: port 3(wlan1-1) entered listening state
[14636.984050] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
[14638.573709] br-lan: port 2(wlan1) entered learning state
[14638.613736] br-lan: port 3(wlan1-1) entered learning state
[14640.573697] br-lan: topology change detected, propagating
[14640.579195] br-lan: port 2(wlan1) entered forwarding state
[14640.613696] br-lan: topology change detected, propagating
[14640.619184] br-lan: port 3(wlan1-1) entered forwarding state
[14900.840621] device wlan1 left promiscuous mode
[14900.845258] br-lan: port 2(wlan1) entered disabled state
[14901.155292] br-lan: port 3(wlan1-1) entered disabled state
[14901.163070] device wlan1-1 left promiscuous mode
[14901.167772] br-lan: port 3(wlan1-1) entered disabled state
[14902.704697] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[14902.795529] device wlan1 entered promiscuous mode
[14902.800416] br-lan: port 2(wlan1) entered listening state
[14902.805971] br-lan: port 2(wlan1) entered listening state
[14903.192491] br-lan: port 2(wlan1) entered disabled state
[14909.415709] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[14909.422297] br-lan: port 2(wlan1) entered listening state
[14909.427854] br-lan: port 2(wlan1) entered listening state
[14909.439971] device wlan1-1 entered promiscuous mode
[14909.452749] IPv6: ADDRCONF(NETDEV_UP): wlan1-1: link is not ready
[14909.459031] br-lan: port 3(wlan1-1) entered listening state
[14909.464744] br-lan: port 3(wlan1-1) entered listening state
[14909.852312] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
[14911.422381] br-lan: port 2(wlan1) entered learning state
[14911.462362] br-lan: port 3(wlan1-1) entered learning state
[14913.422385] br-lan: topology change detected, propagating
[14913.427891] br-lan: port 2(wlan1) entered forwarding state
[14913.462383] br-lan: topology change detected, propagating
[14913.467886] br-lan: port 3(wlan1-1) entered forwarding state
[14938.394932] br-lan: port 3(wlan1-1) entered disabled state
[14938.406909] device wlan1-1 left promiscuous mode
[14938.411615] br-lan: port 3(wlan1-1) entered disabled state
[14938.454827] device wlan1 left promiscuous mode
[14938.459413] br-lan: port 2(wlan1) entered disabled state
[14940.088803] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[14940.185209] device wlan1 entered promiscuous mode
[14940.190067] br-lan: port 2(wlan1) entered listening state
[14940.195618] br-lan: port 2(wlan1) entered listening state
[14940.442300] br-lan: port 2(wlan1) entered disabled state
[14948.047769] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[14948.054389] br-lan: port 2(wlan1) entered listening state
[14948.059913] br-lan: port 2(wlan1) entered listening state
[14948.071978] device wlan1-1 entered promiscuous mode
[14948.090424] IPv6: ADDRCONF(NETDEV_UP): wlan1-1: link is not ready
[14948.096667] br-lan: port 3(wlan1-1) entered listening state
[14948.102358] br-lan: port 3(wlan1-1) entered listening state
[14948.467326] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
[14950.052194] br-lan: port 2(wlan1) entered learning state
[14950.102170] br-lan: port 3(wlan1-1) entered learning state
[14952.052194] br-lan: topology change detected, propagating
[14952.057685] br-lan: port 2(wlan1) entered forwarding state
[14952.102195] br-lan: topology change detected, propagating
[14952.107686] br-lan: port 3(wlan1-1) entered forwarding state
[14973.224021] device wlan1-1 left promiscuous mode
[14973.228784] br-lan: port 3(wlan1-1) entered disabled state
[14973.714741] device wlan1 left promiscuous mode
[14973.719333] br-lan: port 2(wlan1) entered disabled state
[14975.944107] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[14976.105031] device wlan1 entered promiscuous mode
[14983.961980] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[14983.968600] br-lan: port 2(wlan1) entered listening state
[14983.974146] br-lan: port 2(wlan1) entered listening state
[14983.986210] device wlan1-1 entered promiscuous mode
[14984.002370] IPv6: ADDRCONF(NETDEV_UP): wlan1-1: link is not ready
[14984.008659] br-lan: port 3(wlan1-1) entered listening state
[14984.014372] br-lan: port 3(wlan1-1) entered listening state
[14984.397146] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
[14985.971999] br-lan: port 2(wlan1) entered learning state
[14986.011994] br-lan: port 3(wlan1-1) entered learning state
[14987.971986] br-lan: topology change detected, propagating
[14987.977470] br-lan: port 2(wlan1) entered forwarding state
[14988.011988] br-lan: topology change detected, propagating
[14988.017484] br-lan: port 3(wlan1-1) entered forwarding state

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant