We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
jpsollie1:
Device problem occurs on: BananaPI R64 (MT7622) with QCA9888 pcie card
Software versions of OpenWrt/LEDE release, packages, etc. Master branch, kmod-ath10k + vanilla firmware / kmod-ath10k-ct + ct firmware
Steps to reproduce: install kmod-ath10k install board / chip firmware reboot
error reported by dmesg: [ 13.090191] ath10k_pci 0000:01:00.0: assign IRQ: got 147 [ 13.095519] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x56. [ 13.104003] pci 0000:00:00.0: enabling bus mastering [ 13.108989] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 13.115357] ath10k_pci 0000:01:00.0: enabling bus mastering [ 13.121569] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 19.195765] ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000 [ 19.205105] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 19.213696] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9888-fH-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 9a038867 [ 21.260278] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from ath10k/QCA9888/hw2.0/board-2.bin [ 21.281106] ath10k_pci 0000:01:00.0: failed to fetch board-2.bin or board.bin from ath10k/QCA9888/hw2.0 [ 21.290557] ath10k_pci 0000:01:00.0: failed to fetch board file: -12 [ 21.297037] ath10k_pci 0000:01:00.0: could not probe fw (-12)
[ 13.090191] ath10k_pci 0000:01:00.0: assign IRQ: got 147 [ 13.095519] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x56. [ 13.104003] pci 0000:00:00.0: enabling bus mastering [ 13.108989] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 13.115357] ath10k_pci 0000:01:00.0: enabling bus mastering [ 13.121569] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 19.195765] ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000 [ 19.205105] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 19.213696] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9888-fH-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 9a038867 [ 21.260278] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from ath10k/QCA9888/hw2.0/board-2.bin [ 21.281106] ath10k_pci 0000:01:00.0: failed to fetch board-2.bin or board.bin from ath10k/QCA9888/hw2.0 [ 21.290557] ath10k_pci 0000:01:00.0: failed to fetch board file: -12 [ 21.297037] ath10k_pci 0000:01:00.0: could not probe fw (-12)
The text was updated successfully, but these errors were encountered:
No branches or pull requests
jpsollie1:
Device problem occurs on:
BananaPI R64 (MT7622) with QCA9888 pcie card
Software versions of OpenWrt/LEDE release, packages, etc.
Master branch, kmod-ath10k + vanilla firmware / kmod-ath10k-ct + ct firmware
Steps to reproduce:
install kmod-ath10k
install board / chip firmware
reboot
error reported by dmesg:
[ 13.090191] ath10k_pci 0000:01:00.0: assign IRQ: got 147
[ 13.095519] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x56.
[ 13.104003] pci 0000:00:00.0: enabling bus mastering
[ 13.108989] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 13.115357] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 13.121569] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 19.195765] ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
[ 19.205105] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 19.213696] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9888-fH-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 9a038867
[ 21.260278] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from ath10k/QCA9888/hw2.0/board-2.bin
[ 21.281106] ath10k_pci 0000:01:00.0: failed to fetch board-2.bin or board.bin from ath10k/QCA9888/hw2.0
[ 21.290557] ath10k_pci 0000:01:00.0: failed to fetch board file: -12
[ 21.297037] ath10k_pci 0000:01:00.0: could not probe fw (-12)
The text was updated successfully, but these errors were encountered: