New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
FS#4216 - ds-lite: Command failed: Invalid argument #9195
Comments
hrw: Installed 'ip-full' to have 'ip -6 tunnel' working. |
argonym:
So this fixed the issue? |
hrw: It does not fixed the issue. I installed it when tried to skip dslite.sh script and setup such tunnel by hand. "busybox ip" lacks tunnel subcommand. So left comment in case it mattered. |
hrw: Some debugs later: Wed Jan 12 12:53:40 2022 daemon.notice netifd: Orange_DS_lite (8544): _proto_notify(): iface=Orange_DS_lite opts= That's _proto_notify() from /lib/netifd/netifd-proto.sh:
_proto_notify() {
local interface="$1"
local options="$2"
echo "_proto_notify(): iface=$1 opts=$2"
json_add_string "interface" "$interface"
echo "_proto_notify(): $(json_dump)"
ubus $options call network.interface notify_proto "$(json_dump)"
}
I added echo lines to find out what it gets. |
hrw: Same "command failed" with and without "ip-full" package installed. |
hrw:
====== System info ======
====== ISP connectivity options ======
My ISP (Orange Polska) provides two options for network connectivity:
My WAN interface is called "Orange".
===== IPv4 =====
IPv4 setup works fine. My router uses PPPoE to authenticate, setup all routes etc and things "just works".
===== IPv6 =====
IPv6 is more problematic. I can setup IPv6 only network (including LAN clients). But to get IPv4 connectivity I need to setup DS-Lite.
Installed 'ds-lite' package. Used tcpdump to get AFTR address from DHCPv6 packets. Reconfigured "Orange_6" and "Orange_DS_lite":
config interface 'Orange'
option proto 'pppoe'
option device 'eth0.35'
option username 'bez_ochrony-REDACTED@neostrada.pl/ipv6'
option password 'REDACTED'
option ipv6 'auto'
option ip6assign '64'
config interface 'Orange_6'
option proto 'dhcpv6'
option device '@Orange'
option iface_dslite 'Orange_DS_lite'
option reqaddress 'try'
option reqprefix 'auto'
option reqopts '64'
config interface 'Orange_DS_lite'
option proto 'dslite'
option peeraddr 'szcz01f.cgn.tpnet.pl'
option ip6addr '2a01:ZZZZ:YYYY:XXXX::1'
option encaplimit 'ignore'
I can see (from debug output added in /lib/netifd/proto/dslite.sh and /lib/netifd/netifd-proto.sh scripts) that it tries to configure DS-Lite link:
Sat Jan 1 13:11:14 2022 daemon.notice netifd: Orange_DS_lite (13810): dslite.sh: ip6addr: 2a01:ZZZZ:YYYY:XXXX::1 Sat Jan 1 13:11:14 2022 daemon.notice netifd: Orange_DS_lite (13810): dslite.sh: peeraddr: 2a01:1000:0:1::9114 Sat Jan 1 13:11:14 2022 daemon.notice netifd: Orange_DS_lite (13810): _proto_notify(): iface=Orange_DS_lite opts= Sat Jan 1 13:11:14 2022 daemon.notice netifd: Orange_DS_lite (13810): _proto_notify(): json_dump={ "action": 0, "ifname": "ds-Orange_DS_lite", "link-up": true, "tunnel": { "mode": "ipip6", "mtu": 1280, "ttl": 64, "local": "2a01:ZZZZ:YYYY:XXXX::1", "remote": "2a01:1000:0:1::9114", "data": { "encaplimit": "ignore" } }, "data": { "firewall": [ { "type": "nat", "target": "ACCEPT" } ] }, "keep": false, "ipaddr": [ { "ipaddr": "192.0.0.2", "ptp": "192.0.0.1" } ], "routes": [ { "target": "0.0.0.0", "netmask": "0" } ], "interface": "Orange_DS_lite" } Sat Jan 1 13:11:14 2022 daemon.notice netifd: Orange_DS_lite (13810): Command failed: Invalid argument
And then it loops and floods log with repeated failures.
What is wrong?
The text was updated successfully, but these errors were encountered: