We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
MicroDuke:
I have a mercury mw151, the CPU is ar9331, 16M/64M a port 100 megabit network port, a USB/microUSB(Power), configuration as attached.
[[https://bugs.openwrt.org/index.php?getfile=1294]]
Since there is no corresponding firmware, I have been using the firmware of ts-d084, from BB until 19.07.8 version, and used quite well.
Recently I used the latest version 21.02.1 firmware and saw that FLASH is only recognized to 8M.
Also the device does not recognize the USB drive correctly after installing the corresponding USB driver.
opkg install block-mount opkg install kmod-usb-core opkg install kmod-usb-storage opkg install kmod-usb-uhci opkg install kmod-fs-vfat opkg install kmod-usb2
[[https://bugs.openwrt.org/index.php?getfile=1295]]
The text was updated successfully, but these errors were encountered:
No branches or pull requests
MicroDuke:
I have a mercury mw151, the CPU is ar9331, 16M/64M a port 100 megabit network port, a USB/microUSB(Power), configuration as attached.
[[https://bugs.openwrt.org/index.php?getfile=1294]]
Since there is no corresponding firmware, I have been using the firmware of ts-d084, from BB until 19.07.8 version, and used quite well.
Recently I used the latest version 21.02.1 firmware and saw that FLASH is only recognized to 8M.
Also the device does not recognize the USB drive correctly after installing the corresponding USB driver.
opkg install block-mount
opkg install kmod-usb-core
opkg install kmod-usb-storage
opkg install kmod-usb-uhci
opkg install kmod-fs-vfat
opkg install kmod-usb2
[[https://bugs.openwrt.org/index.php?getfile=1295]]
The text was updated successfully, but these errors were encountered: