FS#4083 - kmod-usb-net-rtl8152 resetting #9062
Labels
core packages
pull request/issue for core (in-tree) packages
flyspray
release/21.02
pull request/issue targeted (also) for OpenWrt 21.02 release
anonopenwrt:
Device: FriendlyARM NanoPi R2S
Openwrt version: 21.02
kmod-usb-net-rtl8152 version: 5.4.143-1
Under load the rtl8152 usb->ethernet controller periodically resets, resulting in lost connectivity.
[835268.288485] r8152 4-1:1.0 eth1: Invalid ether addr 00:00:00:00:00:00 [835268.289087] r8152 4-1:1.0 eth1: Random ether addr f6:79:cb:0d:e8:ca [835268.294377] r8152 4-1:1.0 eth1: Promiscuous mode enabled [835601.651427] r8152 4-1:1.0 eth1: Tx timeout [835603.700959] r8152 4-1:1.0 eth1: Tx status -2 [835603.701462] r8152 4-1:1.0 eth1: Tx status -2 [835603.701925] r8152 4-1:1.0 eth1: Tx status -2 [835603.702389] r8152 4-1:1.0 eth1: Tx status -2 [835604.400457] r8152 4-1:1.0 eth1: Invalid ether addr 00:00:00:00:00:00 [835604.401057] r8152 4-1:1.0 eth1: Random ether addr 1a:0c:e4:6e:e6:78 [835604.406427] r8152 4-1:1.0 eth1: Promiscuous mode enabled [835851.756695] r8152 4-1:1.0 eth1: Tx timeout [835851.759988] r8152 4-1:1.0 eth1: Tx status -2 [835851.760467] r8152 4-1:1.0 eth1: Tx status -2 [835851.760989] r8152 4-1:1.0 eth1: Tx status -2 [835851.761459] r8152 4-1:1.0 eth1: Tx status -2 [835854.032456] r8152 4-1:1.0 eth1: Invalid ether addr 00:00:00:00:00:00 [835854.033097] r8152 4-1:1.0 eth1: Random ether addr 9e:77:eb:ed:04:55 [835854.038332] r8152 4-1:1.0 eth1: Promiscuous mode enabled [836203.747280] r8152 4-1:1.0 eth1: Tx timeout [836205.795765] r8152 4-1:1.0 eth1: Tx status -2 [836205.796251] r8152 4-1:1.0 eth1: Tx status -2 [836205.796710] r8152 4-1:1.0 eth1: Tx status -2 [836205.797173] r8152 4-1:1.0 eth1: Tx status -2 [836206.496453] r8152 4-1:1.0 eth1: Invalid ether addr 00:00:00:00:00:00 [836206.497053] r8152 4-1:1.0 eth1: Random ether addr fe:52:21:ca:fa:03 [836206.502398] r8152 4-1:1.0 eth1: Promiscuous mode enabled [836561.625738] r8152 4-1:1.0 eth1: Tx timeout [836563.674078] r8152 4-1:1.0 eth1: Tx status -2 [836563.674565] r8152 4-1:1.0 eth1: Tx status -2 [836563.675030] r8152 4-1:1.0 eth1: Tx status -2 [836563.675493] r8152 4-1:1.0 eth1: Tx status -2 [836564.384455] r8152 4-1:1.0 eth1: Invalid ether addr 00:00:00:00:00:00 [836564.385058] r8152 4-1:1.0 eth1: Random ether addr ba:63:ae:46:69:46 [836564.390679] r8152 4-1:1.0 eth1: Promiscuous mode enabled
Other reports indicate that this is due to a problem with the driver version used by OpenWRT. This problem does not arise in FriendlyWRT.
Additional info: jayanta525/openwrt-nanopi-r2s#5
FriendlyWRT commit to workaround the issue: friendlyarm/rtl8812au@76c3cf8
OpenWRT forum issue: https://forum.openwrt.org/t/update-kmod-usb-net-rtl8152-driver-to-avoid-usb-3-0-to-gigabit-lan-issues/65466/38
The text was updated successfully, but these errors were encountered: