Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#4072 - USB 3.0 drive not able to mount when plugged into 3.0 port V-21.02 #9054

Open
openwrt-bot opened this issue Oct 8, 2021 · 1 comment
Labels
flyspray release/21.02 pull request/issue targeted (also) for OpenWrt 21.02 release

Comments

@openwrt-bot
Copy link

Make WiFi Great Again:

Log is provided in link below please don't skip this! The

Bought a new external USB 3.0 enclosure for SMB. Installed 2TB drive in said enclosure, hooked it up and cannot get it to be recognized when plugged into the USB 3.0 port on my Asus AC68U. It does work on the 2.0 port. And it does work on 3.0 port if i use a 2.0 hub. strange indeed! also note that the USB 3.0 port does correctly identify and mount 2 other 3.0 drives I have.

See here for more info: https://forum.openwrt.org/t/openwrt-21-02-asus-ac68u-unable-to-see-usb-3-0-drives/107161/5
and here: https://bugs.openwrt.org/index.php?do=details&task_id=1862

I did try editing /etc/modules.d/usb-storage to add quirks=VID:PID:u after usb-storage (on the same line). VID/PID must be of your UAS device. kmod-usb-storage-uas should be installed. Reboot for the changes to take effect.

But this this not work.

output of lsusb:
root@AC68U-43B8:~# lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux 5.4.143 ohci_hcd Generic Platform OHCI controller
Bus 004 Device 002: ID 174c:55aa RSH-339 ASM1153E
Bus 004 Device 001: ID 1d6b:0003 Linux 5.4.143 xhci-hcd xHCI Host Controller
Bus 001 Device 001: ID 1d6b:0002 Linux 5.4.143 ehci_hcd EHCI Host Controller
Bus 003 Device 001: ID 1d6b:0002 Linux 5.4.143 xhci-hcd xHCI Host Controller

the device in question is this ID 174c:55aa RSH-339 ASM1153E

root@AC68U-43B8:~# lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
|__ Port 1: Dev 2, If 0, Class=, Driver=, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/0p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/2p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/2p, 480M

Keep in mind this device works on my USB 2.0 port as it should, but not the 3.0 port. However if I flash Tomato firmware to my AC68U then this drive has no issues being mounted while plugged into the USB 3.0 port. If I go back to OpenWRT, as I am now, it once again refuses to mount when plugged into the 3.0 port.

@openwrt-bot
Copy link
Author

Make WiFi Great Again:

Look at the last device, it shows no driver is being loaded!

root@AC68U-43B8:~# cat /sys/kernel/debug/usb/devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 5.04
S: Manufacturer=Linux 5.4.143 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=18021000.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 5.04
S: Manufacturer=Linux 5.4.143 ohci_hcd
S: Product=Generic Platform OHCI controller
S: SerialNumber=18022000.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 0
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 5.04
S: Manufacturer=Linux 5.4.143 xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=18023000.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev= 5.04
S: Manufacturer=Linux 5.4.143 xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=18023000.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=174c ProdID=55aa Rev= 1.00
S: Manufacturer=RSH-339
S: Product=ASM1153E
S: SerialNumber=00000000001D
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 0 Alt= 1 #EPs= 4 Cls=08(stor.) Sub=06 Prot=62 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms

@aparcar aparcar added the release/21.02 pull request/issue targeted (also) for OpenWrt 21.02 release label Feb 22, 2022
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
flyspray release/21.02 pull request/issue targeted (also) for OpenWrt 21.02 release
Projects
None yet
Development

No branches or pull requests

2 participants