You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Download and use the modem firmware supplied by AVM: 5.9.0.12.1.7 or 5.9.1.4.0.7
Openwrt will be using: Line Mode: G.993.2 (VDSL2 with down- and upstream vectoring)
instead of: Line Mode: G.993.5 (VDSL2 with down- and upstream vectoring)
which is used by the stock fritz box firmware. This results in a speed decrease from possible
Max. Attainable Data Rate (ATTNDR): 133.841 Mb/s (down) to 25.000 Mb/s (down)
The text was updated successfully, but these errors were encountered:
Mmmh, G.993.5 is the actual vectoring spec and not the standard in use, according to how I read the new code
G.993.2 (VDSL2 with down- and upstream vectoring)
really is OpenWrt's way of saying G 993.5....
The downgrade in Download sync indicates maybe that the DSLAM put your modem into a fall-backprofile? (E.g. in Germany the incumbent Deutsche Telekom, will move links where DSLAM and Modem could not successfully negotiate vectoring into a profile only using the lowest 2.2 MHz of spectrum as that is exempted from Vectoring so that old ADSL modems do not eed to be relaced). Now, that system should automatically renegotiate vectoring and release the spectrum restricted profile once a vectoring capable mode successfully handshakes with the DSLAM, but I heard anecdotal reports, that operator intervention sometimes was required after sme experiments with non-vectoring enabled firmware blobs.
eporsche:
Supply the following if possible:
Device problem occurs on
AVM Fritz 7412
Lantiq-VRX200
Software versions of OpenWrt/LEDE release, packages, etc.
21.02.0 (r16279-5cc0535800)
Steps to reproduce
Flash firmware
Enter ISP configuration for 1&1 (https://openwrt.org/docs/guide-user/network/wan/isp-configurations)
Download and use the modem firmware supplied by AVM: 5.9.0.12.1.7 or 5.9.1.4.0.7
Openwrt will be using: Line Mode: G.993.2 (VDSL2 with down- and upstream vectoring)
instead of: Line Mode: G.993.5 (VDSL2 with down- and upstream vectoring)
which is used by the stock fritz box firmware. This results in a speed decrease from possible
Max. Attainable Data Rate (ATTNDR): 133.841 Mb/s (down) to 25.000 Mb/s (down)
The text was updated successfully, but these errors were encountered: