You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
The bootloader will boot either OS1 or OS2 -> we get an unbootable device.
Now we have two similar devices, MiWifi Nano R1 and R3L/R3C with different partition layout but the wiki proposes to flash the same image: https://openwrt.org/toh/xiaomi/mir3chttps://openwrt.org/toh/xiaomi/miwifi_nano I personally still use my R3L so I would propose we add a new device type that could cover R3L.
The text was updated successfully, but these errors were encountered:
OpenWrt 19.07 release is EOL, try to reproduce the issue with latest supported release and feel free to ask for issue reopening if the problem is still present, thanks.
vamanea:
Supply the following if possible:
Xiaomi MiWifi R3L
OpenWrt v19.07.7
The problem is the dts MIWIFI-NANO.dts defines a incompatible layout of the flash, which ends up flashing OpenWrt to the wrong part of the flash.
The OEM partition layout is:
[ 1.510000] 0x000000000000-0x000001000000 : "ALL"
[ 1.510000] 0x000000000000-0x000000030000 : "Bootloader"
[ 1.520000] 0x000000030000-0x000000040000 : "Config"
[ 1.530000] 0x000000040000-0x000000050000 : "Bdata"
[ 1.530000] 0x000000050000-0x000000060000 : "Factory"
[ 1.540000] 0x000000060000-0x000000070000 : "crash"
[ 1.550000] 0x000000070000-0x000000080000 : "cfg_bak"
[ 1.550000] 0x000000080000-0x000000140000 : "overlay"
[ 1.560000] 0x000000140000-0x0000008a0000 : "OS1"
[ 1.610000] 0x0000002a0000-0x0000008a0000 : "rootfs"
[ 1.610000] 0x0000008a0000-0x000001000000 : "OS2"
with emphasis on OS1 and OS2.
However MIWIFI-NANO.dts defines firmware partition as:
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
The bootloader will boot either OS1 or OS2 -> we get an unbootable device.
Now we have two similar devices, MiWifi Nano R1 and R3L/R3C with different partition layout but the wiki proposes to flash the same image: https://openwrt.org/toh/xiaomi/mir3c https://openwrt.org/toh/xiaomi/miwifi_nano I personally still use my R3L so I would propose we add a new device type that could cover R3L.
The text was updated successfully, but these errors were encountered: