We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
UltraHKR:
Supply the following if possible:
The hardware was checked before flashing, in OEM firmware WAN is working.
As shown below one of the ports has a blank uid value (full zeros).
(Attached is a full copy of kernel log.
[ 1.192635] ag71xx 19000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY] [ 1.202218] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii [ 1.524463] ag71xx 1a000000.eth: connected to PHY at rtl8366s:04 [uid=001cc960, driver=Generic PHY] [ 1.534115] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: rgmii
The text was updated successfully, but these errors were encountered:
No branches or pull requests
UltraHKR:
Supply the following if possible:
The hardware was checked before flashing, in OEM firmware WAN is working.
As shown below one of the ports has a blank uid value (full zeros).
(Attached is a full copy of kernel log.
[ 1.192635] ag71xx 19000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 1.202218] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[ 1.524463] ag71xx 1a000000.eth: connected to PHY at rtl8366s:04 [uid=001cc960, driver=Generic PHY]
[ 1.534115] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: rgmii
The text was updated successfully, but these errors were encountered: