OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Critical
  • Priority Very Low
  • Reported Version openwrt-21.02
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by UltraHKR - 30.07.2021

FS#3957 - WAN port broken on WNDR3800

Supply the following if possible:
- Netgear WNDR3800-1CHNAS
- OpenWrt 21.02-SNAPSHOT r16247-60fad8f82b
- Steps to reproduce:

  • Flash from stock to OpenWRT 19.07.x ATH79
  • Flash from 19.07.x to OpenWRT 21.02-SNAPSHOT
  • Reset to factory in GUI
  • WAN never comes up, it never leaves “UP BROADCAST MULTICAST” according to ifconfig.
  • WAN port is always flapping, nothing is logged on kernel/system logs.

The hardware was checked before flashing, in OEM firmware WAN is working.

As shown below one of the ports has a blank uid value (full zeros).

(Attached is a full copy of kernel log.

[ 1.192635] ag71xx 19000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 1.202218] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[ 1.524463] ag71xx 1a000000.eth: connected to PHY at rtl8366s:04 [uid=001cc960, driver=Generic PHY]
[ 1.534115] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: rgmii

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing