FS#3948 - ath10k not working on clearfog pro with openwrt-21.02 #8945
Labels
flyspray
kernel
pull request/issue with Linux kernel related changes
release/21.02
pull request/issue targeted (also) for OpenWrt 21.02 release
damnms:
Supply the following if possible:
Device problem occurs on
SolidRun Clearfog Pro A1
Software versions of OpenWrt/LEDE release, packages, etc.
openwrt branch 21.02
Steps to reproduce
boot it with a compex wle600 or wle900 pcie wifi card and it will report something like:
[ 683.019493] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 683.265291] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 683.274540] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 683.284178] ath10k_pci 0000:02:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
[ 683.342118] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 685.564553] ath10k_pci 0000:02:00.0: failed to receive control response completion, polling..
[ 686.604459] ath10k_pci 0000:02:00.0: Service connect timeout
[ 686.610136] ath10k_pci 0000:02:00.0: failed to connect htt (-110)
[ 686.725295] ath10k_pci 0000:02:00.0: could not init core (-110)
[ 686.731257] ath10k_pci 0000:02:00.0: could not probe fw (-110)
I configured the kernel with CONFIG_PACKAGE_ath10k-board-qca988x=y and CONFIG_PACKAGE_ath10k-firmware-qca988x=y
In openwrt 19.x i get:
OpenWrt 19.07.7, r11306-c4a6851c72
root@OpenWrt:~# dmesg | grep ath
[ 11.207948] ath10k_pci 0000:02:00.0: enabling device (0140 -> 0142)
[ 11.214444] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 11.454635] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[ 11.465380] ath10k_pci 0000:02:00.0: Falling back to user helper
[ 11.507440] firmware ath10k!pre-cal-pci-0000:02:00.0.bin: firmware_loading_store: map pages failed
[ 11.516611] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[ 11.527009] ath10k_pci 0000:02:00.0: Falling back to user helper
[ 11.537130] firmware ath10k!cal-pci-0000:02:00.0.bin: firmware_loading_store: map pages failed
[ 11.545913] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[ 11.556650] ath10k_pci 0000:02:00.0: Falling back to user helper
[ 11.566721] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 11.623287] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[ 11.632549] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 11.642078] ath10k_pci 0000:02:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
[ 11.686880] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 11.697349] ath10k_pci 0000:02:00.0: Falling back to user helper
[ 11.707724] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 11.720044] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 12.859296] ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[ 12.992322] ath: EEPROM regdomain: 0x0
[ 12.992325] ath: EEPROM indicates default country code should be used
[ 12.992327] ath: doing EEPROM country->regdmn map search
[ 12.992330] ath: country maps to regdmn code: 0x3a
[ 12.992333] ath: Country alpha2 being used: US
[ 12.992334] ath: Regpair used: 0x3a
[ 14.794232] ath: EEPROM regdomain: 0x82f4
[ 14.804051] ath: EEPROM indicates we should expect a country code
[ 14.810159] ath: doing EEPROM country->regdmn map search
[ 14.815521] ath: country maps to regdmn code: 0x37
[ 14.820326] ath: Country alpha2 being used: CH
[ 14.824790] ath: Regpair used: 0x37
[ 14.828285] ath: regdomain 0x82f4 dynamically updated by user
[ 17.571688] ath10k_pci 0000:02:00.0: pdev param 0 not supported by firmware
I tried it also with the -ht firmware in v21_02 but still no luck.
Here https://githubmemory.com/repo/greearb/ath10k-ct/issues/148 someone mentioned that this might be a problem with SolidRun's PCIe implementation (if i understood that correctly).
The text was updated successfully, but these errors were encountered: