New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
FS#3919 - TPLink RE450 wrong DTS #8914
Comments
kpoman: Bumping this and clarifying: in the original dts, the 'config' partition starts at 0x630000 and the next one at 0x7f0000, which gives us 1C0000 free space for it. However, we only use 0x020000 (~320kB) instead of 0x1C0000 (~1.8MB), which makes this device pretty unusable if one wants to install even base packages. I confirm that changing the dts made more room on it. However the change is not on the main repo so every update, the change is lost. |
kpoman: Another look at partitions on a booted re450-v2 using 21.02: [ 0.402453] 0x000000520000-0x0000005e0000 : "rootfs_data" rootfs_data is way too small ! |
Could anyone take a look at this please ? I just tried building the firmware without any different package and situation is worse than before:
thanks and feel free to ask if I can test or do something to help. |
kpoman:
Supply the following if possible:
Device problem occurs on:
TPLink RE450 v2
Software versions of OpenWrt/LEDE release, packages, etc.
openwrt snapshot 21.02
Steps to reproduce
install basic firmware, check for available space, which is <500kB even if the firmware is 5MB and the device has 8MB flash.
Apparently wrong dts here: https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts
in particular:
should be changed to:
The text was updated successfully, but these errors were encountered: