OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version openwrt-19.07
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Balazs Vinarz - 09.06.2021

FS#3862 - [ATH79][19.07.7] unstable USB on Archer C7 v1/v2/v4

Hi!

I have some problems with multiple host and usb devices, while using 19.07 release. I tried 19.07, 19.07.1, 19.07.3 and 19.07.7.
I tried three Archer C7 versions over the time, and different USB devices and even different overlay filesystems, but the symptoms are the same.
With overlayfs the devices losts it's USB storage after ~1-2 days, however without overlay it works up to 4 days. Unfortunately SSH or web access is mostly not possible after the device looses the USB device(9 out of 10).
I opened previously bug report for 1043v2, this device batch (MIPS and TP-Link) seem to be affected.

[263194.198081] usb 2-1: reset high-speed USB device number 2 using ehci-platform
[263199.378038] usb 2-1: device descriptor read/64, error -145
[263214.737906] usb 2-1: device descriptor read/64, error -145
[263215.007920] usb 2-1: reset high-speed USB device number 2 using ehci-platform
[263215.167912] usb 2-1: device descriptor read/64, error -71
[263215.447908] usb 2-1: device descriptor read/64, error -71
[263215.717902] usb 2-1: reset high-speed USB device number 2 using ehci-platform
[263216.167896] usb 2-1: device not accepting address 2, error -71
[263216.317897] usb 2-1: reset high-speed USB device number 2 using ehci-platform
[263216.767886] usb 2-1: device not accepting address 2, error -71
[263216.774186] usb 2-1: USB disconnect, device number 2
[263216.807934] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
[263216.816500] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 04 2b 26 b8 00 00 20 00
[263216.824449] print_req_error: I/O error, dev sda, sector 69936824
[263216.833972] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
[263216.842578] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 04 2b 26 d8 00 00 20 00
[263216.850508] print_req_error: I/O error, dev sda, sector 69936856
[263217.035893] blk_partition_remap: fail for partition 3
[263217.084319] blk_partition_remap: fail for partition 3
[263217.089747] usb 2-1: new high-speed USB device number 3 using ehci-platform
[263217.220988] blk_partition_remap: fail for partition 3
[263217.226496] blk_partition_remap: fail for partition 3
[263217.335635] blk_partition_remap: fail for partition 3
[263217.378953] usb 2-1: device descriptor read/64, error -71
[263217.403255] blk_partition_remap: fail for partition 3
[263217.716297] usb 2-1: device descriptor read/64, error -71
[263217.766228] blk_partition_remap: fail for partition 3
[263217.900631] blk_partition_remap: fail for partition 3
[263217.939582] blk_partition_remap: fail for partition 3
[263217.945175] blk_partition_remap: fail for partition 3
[263217.987923] usb 2-1: new high-speed USB device number 4 using ehci-platform
[263218.157896] usb 2-1: device descriptor read/64, error -71
[263218.437883] usb 2-1: device descriptor read/64, error -71
[263218.558126] usb usb2-port1: attempt power cycle
[263219.267879] usb 2-1: new high-speed USB device number 5 using ehci-platform
[263219.717866] usb 2-1: device not accepting address 5, error -71
[263219.867910] usb 2-1: new high-speed USB device number 6 using ehci-platform
[263220.317873] usb 2-1: device not accepting address 6, error -71
[263220.324047] usb usb2-port1: unable to enumerate USB device
[304298.508857] blk_partition_remap: fail for partition 3
Balazs Vinarz commented on 09.06.2021 05:28

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing