Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#3822 - TP-Link Archer C7 v4 - Kernel Warning / Stack Trace #8821

Open
openwrt-bot opened this issue May 22, 2021 · 0 comments
Open

FS#3822 - TP-Link Archer C7 v4 - Kernel Warning / Stack Trace #8821

openwrt-bot opened this issue May 22, 2021 · 0 comments
Labels
flyspray kernel pull request/issue with Linux kernel related changes release/21.02 pull request/issue targeted (also) for OpenWrt 21.02 release

Comments

@openwrt-bot
Copy link

Noki:

I have a TP-Link Archer C7 v4 running the Freifunk Berlin Falter Firmware 1.2.0-Snapshot based on OpenWrt 21.02-SNAPSHOT r16090-bbbc01ede5

I get the following kernel log with a warning / stack trace.

[ 0.000000] Linux version 5.4.119 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16090-bbbc01ede5)) #0 Mon May 17 21:03:13 2021 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc) [ 0.000000] MIPS: machine is TP-Link Archer C7 v4 [ 0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 122244K/131072K available (5222K kernel code, 192K rwdata, 684K rodata, 1188K init, 205K bss, 8828K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 51 [ 0.000000] random: get_random_bytes called from 0x80657a28 with crng_init=0 [ 0.000000] CPU clock: 775.000 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns [ 0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns [ 0.008229] Calibrating delay loop... 385.02 BogoMIPS (lpj=770048) [ 0.046713] pid_max: default: 32768 minimum: 301 [ 0.051714] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.059425] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.072231] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.082547] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.089824] pinctrl core: initialized pinctrl subsystem [ 0.097717] NET: Registered protocol family 16 [ 0.126512] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 [ 0.140128] clocksource: Switched to clocksource MIPS [ 0.146579] NET: Registered protocol family 2 [ 0.151367] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.159667] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.168544] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.176635] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.184079] TCP: Hash tables configured (established 1024 bind 1024) [ 0.190908] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.197852] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.205497] NET: Registered protocol family 1 [ 0.210145] PCI: CLS 0 bytes, default 32 [ 0.217899] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.230918] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.237111] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.260358] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.271643] pinctrl-single 1804002c.pinmux: 544 pins, size 68 [ 0.278322] gpio-export gpio-export: 2 gpio(s) exported [ 0.284697] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.293573] printk: console [ttyS0] disabled [ 0.298161] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A [ 0.307265] printk: console [ttyS0] enabled [ 0.316331] printk: bootconsole [early0] disabled [ 0.335184] led_gpio@0 enforce active low on chipselect handle [ 0.346805] spi-nor spi0.0: gd25q128 (16384 Kbytes) [ 0.351942] 5 fixed-partitions partitions found on MTD device spi0.0 [ 0.358521] Creating 5 MTD partitions on "spi0.0": [ 0.363486] 0x000000000000-0x000000020000 : "factory-uboot" [ 0.370131] 0x000000020000-0x000000040000 : "u-boot" [ 0.376214] 0x000000040000-0x000000f00000 : "firmware" [ 0.384926] 2 uimage-fw partitions found on MTD device firmware [ 0.391093] Creating 2 MTD partitions on "firmware": [ 0.396235] 0x000000000000-0x0000001f1110 : "kernel" [ 0.402168] 0x0000001f1110-0x000000ec0000 : "rootfs" [ 0.408216] mtd: device 4 (rootfs) set to be root filesystem [ 0.415723] 1 squashfs-split partitions found on MTD device rootfs [ 0.422186] 0x000000730000-0x000000ec0000 : "rootfs_data" [ 0.428677] 0x000000f00000-0x000000ff0000 : "info" [ 0.434506] 0x000000ff0000-0x000001000000 : "art" [ 0.442165] libphy: Fixed MDIO Bus: probed [ 1.096499] libphy: ag71xx_mdio: probed [ 1.103567] switch0: Atheros AR8337 rev. 2 switch registered on mdio.0 [ 1.148120] random: fast init done [ 1.691621] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316] [ 1.702905] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: sgmii [ 1.709675] i2c /dev entries driver [ 1.720339] NET: Registered protocol family 10 [ 1.728599] Segment Routing with IPv6 [ 1.732540] NET: Registered protocol family 17 [ 1.737210] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.750606] 8021q: 802.1Q VLAN Support v1.8 [ 1.755742] PCI host bridge /ahb/pcie-controller@18250000 ranges: [ 1.762110] MEM 0x0000000012000000..0x0000000013ffffff [ 1.767513] IO 0x0000000000000000..0x0000000000000000 [ 1.773056] PCI host bridge to bus 0000:00 [ 1.777320] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff] [ 1.784429] pci_bus 0000:00: root bus resource [io 0x0000] [ 1.790188] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 1.797202] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.805432] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000 [ 1.811700] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 1.818765] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.825758] pci 0000:00:00.0: supports D1 D2 [ 1.831178] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.838059] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] [ 1.845637] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref] [ 1.854454] hctosys: unable to open rtc device (rtc0) [ 1.865436] VFS: Mounted root (squashfs filesystem) readonly on device 31:4. [ 1.879260] Freeing unused kernel memory: 1188K [ 1.883966] This architecture does not have kernel memory protection. [ 1.890615] Run /sbin/init as init process [ 2.531279] init: Console is alive [ 2.535100] init: - watchdog - [ 3.858980] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.949999] usbcore: registered new interface driver usbfs [ 3.955784] usbcore: registered new interface driver hub [ 3.961377] usbcore: registered new device driver usb [ 3.972422] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.980762] ehci-fsl: Freescale EHCI Host controller driver [ 3.987900] ehci-platform: EHCI generic platform driver [ 3.993571] ehci-platform 1b000000.usb: EHCI Host Controller [ 3.999481] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1 [ 4.007687] ehci-platform 1b000000.usb: irq 13, io mem 0x1b000000 [ 4.028140] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00 [ 4.035363] hub 1-0:1.0: USB hub found [ 4.039636] hub 1-0:1.0: 1 port detected [ 4.044357] ehci-platform 1b400000.usb: EHCI Host Controller [ 4.050276] ehci-platform 1b400000.usb: new USB bus registered, assigned bus number 2 [ 4.058501] ehci-platform 1b400000.usb: irq 14, io mem 0x1b400000 [ 4.080142] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00 [ 4.087319] hub 2-0:1.0: USB hub found [ 4.091573] hub 2-0:1.0: 1 port detected [ 4.098529] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.107083] init: - preinit - [ 5.373251] random: jshn: uninitialized urandom read (4 bytes read) [ 5.487990] random: jshn: uninitialized urandom read (4 bytes read) [ 5.716329] random: jshn: uninitialized urandom read (4 bytes read) [ 7.450802] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up [ 7.457222] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up [ 7.483636] eth0: link up (1000Mbps/Full duplex) [ 7.493582] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7.507403] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 7.532598] urandom_read: 4 callbacks suppressed [ 7.532605] random: procd: uninitialized urandom read (4 bytes read) [ 11.817888] jffs2: notice: (608) jffs2_build_xattr_subsystem: complete building xattr subsystem, 66 of xdatum (27 unchecked, 35 orphan) and 75 of xref (8 dead, 31 orphan) found. [ 11.836311] mount_root: switching to jffs2 overlay [ 11.852207] overlayfs: upper fs does not support tmpfile. [ 11.864361] urandom-seed: Seeding with /etc/urandom.seed [ 11.974733] eth0: link down [ 11.999661] procd: - early - [ 12.002789] procd: - watchdog - [ 12.651085] procd: - watchdog - [ 12.655704] procd: - ubus - [ 12.726207] random: ubusd: uninitialized urandom read (4 bytes read) [ 12.734816] random: ubusd: uninitialized urandom read (4 bytes read) [ 12.744823] procd: - init - [ 13.618022] kmodloader: loading kernel modules from /etc/modules.d/* [ 13.684904] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 13.743030] l2tp_core: L2TP core driver, V2.0 [ 13.757214] l2tp_netlink: L2TP netlink interface [ 13.769363] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 13.785399] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 13.801335] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 13.869266] Mirror/redirect action on [ 13.950939] u32 classifier [ 13.953789] input device check on [ 13.957584] Actions configured [ 14.015242] Loading modules backported from Linux version v5.10.34-0-g0aa66717f684 [ 14.023115] Backport generated by backports.git v5.10.34-1-0-g7b5533e1 [ 14.032271] urngd: v1.0.2 started. [ 14.304930] xt_time: kernel timezone is -0000 [ 14.524192] PPP generic driver version 2.4.2 [ 14.535650] random: crng init done [ 14.541580] NET: Registered protocol family 24 [ 14.604961] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002) [ 14.611646] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0 [ 16.094363] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 [ 16.103932] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 16.116961] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258 [ 16.406681] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 [ 17.564508] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1 [ 17.675676] ath: EEPROM regdomain sanitized [ 17.675686] ath: EEPROM regdomain: 0x64 [ 17.675689] ath: EEPROM indicates we should expect a direct regpair map [ 17.675707] ath: Country alpha2 being used: 00 [ 17.675710] ath: Regpair used: 0x64 [ 17.785074] batman_adv: B.A.T.M.A.N. advanced 2021.0-openwrt-1 (compatibility version 15) loaded [ 17.817578] ath: EEPROM regdomain sanitized [ 17.817588] ath: EEPROM regdomain: 0x64 [ 17.817591] ath: EEPROM indicates we should expect a direct regpair map [ 17.817610] ath: Country alpha2 being used: 00 [ 17.817613] ath: Regpair used: 0x64 [ 17.829185] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 17.831073] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=2 [ 17.859139] kmodloader: done loading kernel modules from /etc/modules.d/* [ 32.196791] eth0: link up (1000Mbps/Full duplex) [ 32.214197] br-dhcp: port 1(eth0.1) entered blocking state [ 32.219926] br-dhcp: port 1(eth0.1) entered disabled state [ 32.225916] device eth0.1 entered promiscuous mode [ 32.230910] device eth0 entered promiscuous mode [ 32.236905] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.300248] br-dhcp: port 1(eth0.1) entered blocking state [ 32.305945] br-dhcp: port 1(eth0.1) entered forwarding state [ 32.397302] br-wan: port 1(eth0.2) entered blocking state [ 32.402938] br-wan: port 1(eth0.2) entered disabled state [ 32.408837] device eth0.2 entered promiscuous mode [ 32.532652] br-wan: port 1(eth0.2) entered blocking state [ 32.538282] br-wan: port 1(eth0.2) entered forwarding state [ 33.196223] IPv6: ADDRCONF(NETDEV_CHANGE): br-dhcp: link becomes ready [ 36.184580] ath: EEPROM regdomain: 0x8114 [ 36.184587] ath: EEPROM indicates we should expect a country code [ 36.184591] ath: doing EEPROM country->regdmn map search [ 36.184595] ath: country maps to regdmn code: 0x37 [ 36.184600] ath: Country alpha2 being used: DE [ 36.184603] ath: Regpair used: 0x37 [ 36.184609] ath: regdomain 0x8114 dynamically updated by user [ 36.184682] ath: EEPROM regdomain: 0x8114 [ 36.184685] ath: EEPROM indicates we should expect a country code [ 36.184688] ath: doing EEPROM country->regdmn map search [ 36.184691] ath: country maps to regdmn code: 0x37 [ 36.184694] ath: Country alpha2 being used: DE [ 36.184697] ath: Regpair used: 0x37 [ 36.184701] ath: regdomain 0x8114 dynamically updated by user [ 40.171117] br-dhcp: port 2(wlan1-dhcp-2) entered blocking state [ 40.177391] br-dhcp: port 2(wlan1-dhcp-2) entered disabled state [ 40.184008] device wlan1-dhcp-2 entered promiscuous mode [ 40.291262] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-dhcp-2: link becomes ready [ 40.298697] br-dhcp: port 2(wlan1-dhcp-2) entered blocking state [ 40.304952] br-dhcp: port 2(wlan1-dhcp-2) entered forwarding state [ 42.205121] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware [ 42.249745] br-dhcp: port 3(wlan0-dhcp-5) entered blocking state [ 42.256033] br-dhcp: port 3(wlan0-dhcp-5) entered disabled state [ 42.262672] device wlan0-dhcp-5 entered promiscuous mode [ 42.329653] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-dhcp-5: link becomes ready [ 42.337106] br-dhcp: port 3(wlan0-dhcp-5) entered blocking state [ 42.343350] br-dhcp: port 3(wlan0-dhcp-5) entered forwarding state [ 45.044402] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-mesh-5: link becomes ready [ 45.088335] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-mesh-2: link becomes ready [ 45.110870] ------------[ cut here ]------------ [ 45.115703] WARNING: CPU: 0 PID: 2208 at net/core/flow_dissector.c:958 0x803cc434 [ 45.123444] Modules linked in: ath9k ath9k_common pppoe ppp_async batman_adv ath9k_hw ath10k_pci ath10k_core ath pppox ppp_generic mac80211 iptable_nat ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_MASQUERADE xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY slhc nf_reject_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_conncount libcrc32c iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat act_connmark nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb l2tp_ip6 l2tp_ip l2tp_eth l2tp_netlink l2tp_core [ 45.123595] udp_tunnel ip6_udp_tunnel ipip tunnel4 ip_tunnel fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16 crc32c_generic crypto_hash [ 45.231414] CPU: 0 PID: 2208 Comm: sh Not tainted 5.4.119 #0 [ 45.237258] Stack : 00000000 800b92f8 80650000 805f2a28 00000000 00000000 00000000 00000000 [ 45.245894] 00000000 00000000 00000000 00000000 00000000 00000001 87c0bbe0 646c4d3b [ 45.254530] 87c0bc78 00000000 00000000 000000f5 00000038 80573264 204e6f74 20746169 [ 45.263167] 000000f5 d3193319 00000000 000387f6 80000000 87c0bbc0 00000000 803cc434 [ 45.271805] 00000009 86dc73b4 87ec7818 80630000 00000003 8031ec9c 00000000 80780000 [ 45.280443] ... [ 45.282961] Call Trace: [ 45.282969] [<800b92f8>] 0x800b92f8 [ 45.289103] [<80573264>] 0x80573264 [ 45.292711] [<803cc434>] 0x803cc434 [ 45.296357] [<8031ec9c>] 0x8031ec9c [ 45.299965] [<80069364>] 0x80069364 [ 45.303575] [<8006936c>] 0x8006936c [ 45.307184] [<800821b4>] 0x800821b4 [ 45.310794] [<803cc434>] 0x803cc434 [ 45.314404] [<8008225c>] 0x8008225c [ 45.318039] [<803cc434>] 0x803cc434 [ 45.321648] [<804df048>] 0x804df048 [ 45.325271] [<804dfad4>] 0x804dfad4 [ 45.328890] [<804df130>] 0x804df130 [ 45.332525] [<804df130>] 0x804df130 [ 45.336162] [<804dfce0>] 0x804dfce0 [ 45.339805] [<803cd8ac>] 0x803cd8ac [ 45.343411] [<803d8e50>] 0x803d8e50 [ 45.347088] [<86c32a30>] 0x86c32a30 [mac80211@8134b527+0x7ced0] [ 45.353235] [<803da098>] 0x803da098 [ 45.356883] [<86c38924>] 0x86c38924 [mac80211@8134b527+0x7ced0] [ 45.363027] [<87749014>] 0x87749014 [ath10k_pci@70f8799a+0x6770] [ 45.369310] [<86c3a5a0>] 0x86c3a5a0 [mac80211@8134b527+0x7ced0] [ 45.375456] [<803da7b0>] 0x803da7b0 [ 45.379077] [<800ba1f0>] 0x800ba1f0 [ 45.382683] [<80085040>] 0x80085040 [ 45.386292] [<805788b0>] 0x805788b0 [ 45.389902] [<800bed80>] 0x800bed80 [ 45.393515] [<802be854>] 0x802be854 [ 45.397139] [<80064f78>] 0x80064f78 [ 45.400753] [ 45.402293] ---[ end trace b6c86392035260d5 ]---
@aparcar aparcar added release/21.02 pull request/issue targeted (also) for OpenWrt 21.02 release kernel pull request/issue with Linux kernel related changes labels Feb 22, 2022
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
flyspray kernel pull request/issue with Linux kernel related changes release/21.02 pull request/issue targeted (also) for OpenWrt 21.02 release
Projects
None yet
Development

No branches or pull requests

2 participants