OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Medium
  • Priority Very Low
  • Reported Version All
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by openwrt12345 - 15.05.2021

FS#3812 - WAVLINK WL-WN570HA1 low txpower activate amplifier via gpio

Device : WAVLINK WL-WN570HA1

Firmwareversion : all (19.07.7)

At this moment it is impossible to use the full txpower of the WN570HA1 on both bands (2,4Ghz and 5Ghz).
Possible txpower at the moment:
2,4 Ghz —>24dbm (should have at least 27dbm)
5 Ghz —> 11 dbm or 13 dbm (can`t remember right now)

Is it possible, that the device uses an external amplifier which has to be activated via gpio settings?

Referring to this post for the Asus Lyra 2200, could some sort of same method activate the amp in the WN570HA1 ?
https://forum.openwrt.org/t/asus-map-ac2200-low-transmit-receive-signal-5ghz/69005

I hope that one or two replies from more experienced users/programmers could lead us in the right direction.
Thanks in advance.


Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing